annotate po/Makefile.in.in @ 1062:1d65dcdb714c trunk

[svn] - bump version of plugins and version requirements per plugin api v2

# Makefile for PO directory in any package using GNU gettext.
# Copyright (C) 1995-1997, 2000-2005 by Ulrich Drepper <[e-mail]>
#
# This file can be copied and used freely without restrictions.  It can
# be used in projects which are not available under the GNU General Public
# License but which still want to provide support for the GNU gettext
# functionality.
# Please note that the actual code of GNU gettext is covered by the GNU
# General Public License and is *not* in the public domain.
#
# Origin: gettext-0.14.4

PACKAGE = @PACKAGE@
VERSION = @VERSION@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

SHELL = /bin/sh
@SET_MAKE@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@

prefix = @prefix@
exec_prefix = @exec_prefix@
datadir = @datadir@
localedir = $(datadir)/locale
gettextsrcdir = $(datadir)/gettext/po

INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
MKINSTALLDIRS = @MKINSTALLDIRS@
mkinstalldirs = $(SHELL) $(MKINSTALLDIRS)

GMSGFMT = @GMSGFMT@
MSGFMT = @MSGFMT@
XGETTEXT = @XGETTEXT@
MSGMERGE = msgmerge
MSGMERGE_UPDATE = @MSGMERGE@ --update
MSGINIT = msginit
MSGCONV = msgconv
MSGFILTER = msgfilter

POFILES = @POFILES@
GMOFILES = @GMOFILES@
UPDATEPOFILES = @UPDATEPOFILES@
DUMMYPOFILES = @DUMMYPOFILES@
DISTFILES.common = Makefile.in.in remove-potcdate.sin \
$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
$(POFILES) $(GMOFILES) \
$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)

POTFILES = \

CATALOGS = @CATALOGS@

# Makevars gets inserted here. (Don't remove this line!)

.SUFFIXES:
.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update

.po.mo:
	@echo "$(MSGFMT) -c -o $@ $<"; \
	$(MSGFMT) -c -o t-$@ $< && mv t-$@ $@

.po.gmo:
	@lang=`echo $* | sed -e 's,.*/,,'`; \
	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
	echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
	cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo

.sin.sed:
	sed -e '/^#/d' $< > t-$@
	mv t-$@ $@


all: all-@USE_NLS@

all-yes: stamp-po
all-no:

# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
# we don't want to bother translators with empty POT files). We assume that
# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
# In this case, stamp-po is a nop (i.e. a phony target).

# stamp-po is a timestamp denoting the last time at which the CATALOGS have
# been loosely updated. Its purpose is that when a developer or translator
# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
# invocations of "make" will do nothing. This timestamp would not be necessary
# if updating the $(CATALOGS) would always touch them; however, the rule for
# $(POFILES) has been designed to not touch files that don't need to be
# changed.
stamp-po: $(srcdir)/$(DOMAIN).pot
	test ! -f $(srcdir)/$(DOMAIN).pot || \
	  test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
	@test ! -f $(srcdir)/$(DOMAIN).pot || { \
	  echo "touch stamp-po" && \
	  echo timestamp > stamp-poT && \
	  mv stamp-poT stamp-po; \
	}

# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
# otherwise packages like GCC can not be built if only parts of the source
# have been downloaded.

# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
	if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
	  msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
	else \
	  msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
	fi; \
	$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
	  --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
	  --files-from=$(srcdir)/POTFILES.in \
	  --copyright-holder='$(COPYRIGHT_HOLDER)' \
	  --msgid-bugs-address="$$msgid_bugs_address"
	test ! -f $(DOMAIN).po || { \
	  if test -f $(srcdir)/$(DOMAIN).pot; then \
	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
	    else \
	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
	    fi; \
	  else \
	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
	  fi; \
	}

# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
# every "make" invocation, only create it when it is missing.
# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
$(srcdir)/$(DOMAIN).pot:
	$(MAKE) $(DOMAIN).pot-update

# This target rebuilds a PO file if $(DOMAIN).pot has changed.
# Note that a PO file is not touched if it doesn't need to be changed.
$(POFILES): $(srcdir)/$(DOMAIN).pot
	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
	if test -f "$(srcdir)/$${lang}.po"; then \
	  test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
	  echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
	  cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot; \
	else \
	  $(MAKE) $${lang}.po-create; \
	fi


install: install-exec install-data
install-exec:
install-data: install-data-@USE_NLS@
	if test "$(PACKAGE)" = "gettext-tools"; then \
	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
	  for file in $(DISTFILES.common) Makevars.template; do \
	    $(INSTALL_DATA) $(srcdir)/$$file \
			    $(DESTDIR)$(gettextsrcdir)/$$file; \
	  done; \
	  for file in Makevars; do \
	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
	  done; \
	else \
	  : ; \
	fi
install-data-no: all
install-data-yes: all
	$(mkinstalldirs) $(DESTDIR)$(datadir)
	@catalogs='$(CATALOGS)'; \
	for cat in $$catalogs; do \
	  cat=`basename $$cat`; \
	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
	  dir=$(localedir)/$$lang/LC_MESSAGES; \
	  $(mkinstalldirs) $(DESTDIR)$$dir; \
	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
	    if test -n "$$lc"; then \
	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
	         for file in *; do \
	           if test -f $$file; then \
	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
	           fi; \
	         done); \
	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
	      else \
	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
	          :; \
	        else \
	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
	        fi; \
	      fi; \
	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
	    fi; \
	  done; \
	done

install-strip: install

installdirs: installdirs-exec installdirs-data
installdirs-exec:
installdirs-data: installdirs-data-@USE_NLS@
	if test "$(PACKAGE)" = "gettext-tools"; then \
	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
	else \
	  : ; \
	fi
installdirs-data-no:
installdirs-data-yes:
	$(mkinstalldirs) $(DESTDIR)$(datadir)
	@catalogs='$(CATALOGS)'; \
	for cat in $$catalogs; do \
	  cat=`basename $$cat`; \
	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
	  dir=$(localedir)/$$lang/LC_MESSAGES; \
	  $(mkinstalldirs) $(DESTDIR)$$dir; \
	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
	    if test -n "$$lc"; then \
	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
	         for file in *; do \
	           if test -f $$file; then \
	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
	           fi; \
	         done); \
	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
	      else \
	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
	          :; \
	        else \
	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
	        fi; \
	      fi; \
	    fi; \
	  done; \
	done

# Define this as empty until I found a useful application.
installcheck:

uninstall: uninstall-exec uninstall-data
uninstall-exec:
uninstall-data: uninstall-data-@USE_NLS@
	if test "$(PACKAGE)" = "gettext-tools"; then \
	  for file in $(DISTFILES.common) Makevars.template; do \
	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
	  done; \
	else \
	  : ; \
	fi
uninstall-data-no:
uninstall-data-yes:
	catalogs='$(CATALOGS)'; \
	for cat in $$catalogs; do \
	  cat=`basename $$cat`; \
	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
	  done; \
	done

check: all

info dvi ps pdf html tags TAGS ctags CTAGS ID:

mostlyclean:
	rm -f remove-potcdate.sed
	rm -f stamp-poT
	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
	rm -fr *.o

clean: mostlyclean

distclean: clean
	rm -f Makefile Makefile.in POTFILES *.mo

maintainer-clean: distclean
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."
	rm -f stamp-po $(GMOFILES)

distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
dist distdir:
	$(MAKE) update-po
	@$(MAKE) dist2
# This is a separate target because 'update-po' must be executed before.
dist2: stamp-po $(DISTFILES)
	dists="$(DISTFILES)"; \
	if test "$(PACKAGE)" = "gettext-tools"; then \
	  dists="$$dists Makevars.template"; \
	fi; \
	if test -f $(srcdir)/$(DOMAIN).pot; then \
	  dists="$$dists $(DOMAIN).pot stamp-po"; \
	fi; \
	if test -f $(srcdir)/ChangeLog; then \
	  dists="$$dists ChangeLog"; \
	fi; \
	for i in 0 1 2 3 4 5 6 7 8 9; do \
	  if test -f $(srcdir)/ChangeLog.$$i; then \
	    dists="$$dists ChangeLog.$$i"; \
	  fi; \
	done; \
	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
	for file in $$dists; do \
	  if test -f $$file; then \
	    cp -p $$file $(distdir) || exit 1; \
	  else \
	    cp -p $(srcdir)/$$file $(distdir) || exit 1; \
	  fi; \
	done

update-po: Makefile
	$(MAKE) $(DOMAIN).pot-update
	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
	$(MAKE) update-gmo

# General rule for creating PO files.

.nop.po-create:
	@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
	echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
	exit 1

# General rule for updating PO files.

.nop.po-update:
	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
	if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
	tmpdir=`pwd`; \
	echo "$$lang:"; \
	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
	echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
	cd $(srcdir); \
	if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
	    rm -f $$tmpdir/$$lang.new.po; \
	  else \
	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
	      :; \
	    else \
	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
	      exit 1; \
	    fi; \
	  fi; \
	else \
	  echo "msgmerge for $$lang.po failed!" 1>&2; \
	  rm -f $$tmpdir/$$lang.new.po; \
	fi

$(DUMMYPOFILES):

update-gmo: Makefile $(GMOFILES)
	@:

Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
	cd $(top_builddir) \
	  && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
	       $(SHELL) ./config.status

force:

# Tell versions [3.59,3.63) of GNU make not to export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: