view src/adplug/core/emuopl.cxx @ 1018:3484d9da7f7c trunk

[svn] - make metadata display in Audacious again.

/*
 * AdPlug - Replayer for many OPL2/OPL3 audio file formats.
 * Copyright (C) 1999 - 2005 Simon Peter <[e-mail]>, et al.
 * 
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 * 
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 * 
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 * emuopl.cpp - Emulated OPL, by Simon Peter <[e-mail]>
 */

#include "emuopl.h"

CEmuopl::CEmuopl (int rate, bool bit16, bool usestereo):use16bit (bit16), stereo (usestereo),
mixbufSamples (0)
{
  opl[0] = OPLCreate (OPL_TYPE_YM3812, 3579545, rate);
  opl[1] = OPLCreate (OPL_TYPE_YM3812, 3579545, rate);

  currType = TYPE_DUAL_OPL2;

  init ();
}

CEmuopl::~CEmuopl ()
{
  OPLDestroy (opl[0]);
  OPLDestroy (opl[1]);

  if (mixbufSamples)
  {
    delete[]mixbuf0;
    delete[]mixbuf1;
  }
}

void
CEmuopl::update (short *buf, int samples)
{
  int i;

  //ensure that our mix buffers are adequately sized
  if (mixbufSamples < samples)
  {
    if (mixbufSamples)
    {
      delete[]mixbuf0;
      delete[]mixbuf1;
    }
    mixbufSamples = samples;

    //*2 = make room for stereo, if we need it
    mixbuf0 = new short[samples * 2];
    mixbuf1 = new short[samples * 2];
  }

  //data should be rendered to outbuf
  //tempbuf should be used as a temporary buffer
  //if we are supposed to generate 16bit output,
  //then outbuf may point directly to the actual waveform output "buf"
  //if we are supposed to generate 8bit output,
  //then outbuf cannot point to "buf" (because there will not be enough room)
  //and so it must point to a mixbuf instead--
  //it will be reduced to 8bit and put in "buf" later
  short *outbuf;
  short *tempbuf = mixbuf0;
  short *tempbuf2 = mixbuf1;
  if (use16bit)
    outbuf = buf;
  else
    outbuf = mixbuf1;
  //...there is a potentially confusing situation where mixbuf1 can be aliased.
  //beware. it is a little loony.

  //all of the following rendering code produces 16bit output

  switch (currType)
  {
  case TYPE_OPL2:
    //for opl2 mode:
    //render chip0 to the output buffer
    YM3812UpdateOne (opl[0], outbuf, samples);

    //if we are supposed to output stereo,
    //then we need to dup the mono channel
    if (stereo)
      for (i = samples - 1; i >= 0; i--)
      {
        outbuf[i * 2] = outbuf[i];
        outbuf[i * 2 + 1] = outbuf[i];
      }
    break;

  case TYPE_OPL3:              // unsupported
    break;

  case TYPE_DUAL_OPL2:
    //for dual opl2 mode:
    //render each chip to a different tempbuffer
    YM3812UpdateOne (opl[0], tempbuf2, samples);
    YM3812UpdateOne (opl[1], tempbuf, samples);

    //output stereo:
    //then we need to interleave the two buffers
    if (stereo)
    {
      //first, spread tempbuf's samples across left channel
      //left channel
      for (i = 0; i < samples; i++)
        outbuf[i * 2] = tempbuf2[i];
      //next, insert the samples from tempbuf2 into right channel
      for (i = 0; i < samples; i++)
        outbuf[i * 2 + 1] = tempbuf[i];
    }
    else
      //output mono:
      //then we need to mix the two buffers into buf
      for (i = 0; i < samples; i++)
        outbuf[i] = (tempbuf[i] >> 1) + (tempbuf2[i] >> 1);
    break;
  }

  //now reduce to 8bit if we need to
  if (!use16bit)
    for (i = 0; i < (stereo ? samples * 2 : samples); i++)
      ((char *) buf)[i] = (outbuf[i] >> 8) ^ 0x80;
}

void
CEmuopl::write (int reg, int val)
{
  switch (currType)
  {
  case TYPE_OPL2:
  case TYPE_DUAL_OPL2:
    OPLWrite (opl[currChip], 0, reg);
    OPLWrite (opl[currChip], 1, val);
    break;
  case TYPE_OPL3:              // unsupported
    break;
  }
}

void
CEmuopl::init ()
{
  OPLResetChip (opl[0]);
  OPLResetChip (opl[1]);
  currChip = 0;
}

void
CEmuopl::settype (ChipType type)
{
  currType = type;
}