Mercurial > audlegacy-plugins
view src/console/Gb_Cpu.cxx @ 2361:c831816c0b87
Add support for proxy_use_auth.
author | William Pitcock <nenolod@atheme.org> |
---|---|
date | Mon, 04 Feb 2008 22:55:38 -0600 |
parents | 986f098da058 |
children |
line wrap: on
line source
// Game_Music_Emu 0.5.2. http://www.slack.net/~ant/ #include "Gb_Cpu.h" #include <string.h> //#include "gb_cpu_log.h" /* Copyright (C) 2003-2006 Shay Green. This module is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This module is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this module; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #include "gb_cpu_io.h" #include "blargg_source.h" // Common instructions: // // 365880 FA LD A,IND16 // 355863 20 JR NZ // 313655 21 LD HL,IMM // 274580 28 JR Z // 252878 FE CMP IMM // 230541 7E LD A,(HL) // 226209 2A LD A,(HL+) // 217467 CD CALL // 212034 C9 RET // 208376 CB CB prefix // // 27486 CB 7E BIT 7,(HL) // 15925 CB 76 BIT 6,(HL) // 13035 CB 19 RR C // 11557 CB 7F BIT 7,A // 10898 CB 37 SWAP A // 10208 CB 66 BIT 4,(HL) #if BLARGG_NONPORTABLE #define PAGE_OFFSET( addr ) (addr) #else #define PAGE_OFFSET( addr ) ((addr) & (page_size - 1)) #endif inline void Gb_Cpu::set_code_page( int i, uint8_t* p ) { state->code_map [i] = p - PAGE_OFFSET( i * (blargg_long) page_size ); } void Gb_Cpu::reset( void* unmapped ) { check( state == &state_ ); state = &state_; state_.remain = 0; for ( int i = 0; i < page_count + 1; i++ ) set_code_page( i, (uint8_t*) unmapped ); memset( &r, 0, sizeof r ); //interrupts_enabled = false; blargg_verify_byte_order(); } void Gb_Cpu::map_code( gb_addr_t start, unsigned size, void* data ) { // address range must begin and end on page boundaries require( start % page_size == 0 ); require( size % page_size == 0 ); unsigned first_page = start / page_size; for ( unsigned i = size / page_size; i--; ) set_code_page( first_page + i, (uint8_t*) data + i * page_size ); } #define READ( addr ) CPU_READ( this, (addr), s.remain ) #define WRITE( addr, data ) {CPU_WRITE( this, (addr), (data), s.remain );} #define READ_FAST( addr, out ) CPU_READ_FAST( this, (addr), s.remain, out ) #define READ_PROG( addr ) (s.code_map [(addr) >> page_shift] [PAGE_OFFSET( addr )]) unsigned const z_flag = 0x80; unsigned const n_flag = 0x40; unsigned const h_flag = 0x20; unsigned const c_flag = 0x10; bool Gb_Cpu::run( blargg_long cycle_count ) { state_.remain = blargg_ulong (cycle_count + clocks_per_instr) / clocks_per_instr; state_t s; this->state = &s; memcpy( &s, &this->state_, sizeof s ); typedef BOOST::uint16_t uint16_t; #if BLARGG_BIG_ENDIAN #define R8( n ) (r8_ [n]) #elif BLARGG_LITTLE_ENDIAN #define R8( n ) (r8_ [(n) ^ 1]) #else #error "Byte order of CPU must be known" #endif union { core_regs_t rg; // individual registers struct { BOOST::uint16_t bc, de, hl, unused; // pairs } rp; uint8_t r8_ [8]; // indexed registers (use R8 macro due to endian dependence) BOOST::uint16_t r16 [4]; // indexed pairs }; BOOST_STATIC_ASSERT( sizeof rg == 8 && sizeof rp == 8 ); rg = r; unsigned pc = r.pc; unsigned sp = r.sp; unsigned flags = r.flags; loop: check( (unsigned long) pc < 0x10000 ); check( (unsigned long) sp < 0x10000 ); check( (flags & ~0xF0) == 0 ); uint8_t const* instr = s.code_map [pc >> page_shift]; unsigned op; // TODO: eliminate this special case #if BLARGG_NONPORTABLE op = instr [pc]; pc++; instr += pc; #else instr += PAGE_OFFSET( pc ); op = *instr++; pc++; #endif #define GET_ADDR() GET_LE16( instr ) if ( !--s.remain ) goto stop; unsigned data; data = *instr; #ifdef GB_CPU_LOG_H gb_cpu_log( "new", pc - 1, op, data, instr [1] ); #endif switch ( op ) { // TODO: more efficient way to handle negative branch that wraps PC around #define BRANCH( cond )\ {\ pc++;\ int offset = (BOOST::int8_t) data;\ if ( !(cond) ) goto loop;\ pc = uint16_t (pc + offset);\ goto loop;\ } // Most Common case 0x20: // JR NZ BRANCH( !(flags & z_flag) ) case 0x21: // LD HL,IMM (common) rp.hl = GET_ADDR(); pc += 2; goto loop; case 0x28: // JR Z BRANCH( flags & z_flag ) { unsigned temp; case 0xF0: // LD A,(0xFF00+imm) temp = data | 0xFF00; pc++; goto ld_a_ind_comm; case 0xF2: // LD A,(0xFF00+C) temp = rg.c | 0xFF00; goto ld_a_ind_comm; case 0x0A: // LD A,(BC) temp = rp.bc; goto ld_a_ind_comm; case 0x3A: // LD A,(HL-) temp = rp.hl; rp.hl = temp - 1; goto ld_a_ind_comm; case 0x1A: // LD A,(DE) temp = rp.de; goto ld_a_ind_comm; case 0x2A: // LD A,(HL+) (common) temp = rp.hl; rp.hl = temp + 1; goto ld_a_ind_comm; case 0xFA: // LD A,IND16 (common) temp = GET_ADDR(); pc += 2; ld_a_ind_comm: READ_FAST( temp, rg.a ); goto loop; } case 0xBE: // CMP (HL) data = READ( rp.hl ); goto cmp_comm; case 0xB8: // CMP B case 0xB9: // CMP C case 0xBA: // CMP D case 0xBB: // CMP E case 0xBC: // CMP H case 0xBD: // CMP L data = R8( op & 7 ); goto cmp_comm; case 0xFE: // CMP IMM pc++; cmp_comm: op = rg.a; data = op - data; sub_set_flags: flags = ((op & 15) - (data & 15)) & h_flag; flags |= (data >> 4) & c_flag; flags |= n_flag; if ( data & 0xFF ) goto loop; flags |= z_flag; goto loop; case 0x46: // LD B,(HL) case 0x4E: // LD C,(HL) case 0x56: // LD D,(HL) case 0x5E: // LD E,(HL) case 0x66: // LD H,(HL) case 0x6E: // LD L,(HL) case 0x7E:{// LD A,(HL) unsigned addr = rp.hl; READ_FAST( addr, R8( (op >> 3) & 7 ) ); goto loop; } case 0xC4: // CNZ (next-most-common) pc += 2; if ( flags & z_flag ) goto loop; call: pc -= 2; case 0xCD: // CALL (most-common) data = pc + 2; pc = GET_ADDR(); push: sp = (sp - 1) & 0xFFFF; WRITE( sp, data >> 8 ); sp = (sp - 1) & 0xFFFF; WRITE( sp, data & 0xFF ); goto loop; case 0xC8: // RNZ (next-most-common) if ( !(flags & z_flag) ) goto loop; case 0xC9: // RET (most common) ret: pc = READ( sp ); pc += 0x100 * READ( sp + 1 ); sp = (sp + 2) & 0xFFFF; goto loop; case 0x00: // NOP case 0x40: // LD B,B case 0x49: // LD C,C case 0x52: // LD D,D case 0x5B: // LD E,E case 0x64: // LD H,H case 0x6D: // LD L,L case 0x7F: // LD A,A goto loop; // CB Instructions case 0xCB: pc++; // now data is the opcode switch ( data ) { { int temp; case 0x46: // BIT b,(HL) case 0x4E: case 0x56: case 0x5E: case 0x66: case 0x6E: case 0x76: case 0x7E: { unsigned addr = rp.hl; READ_FAST( addr, temp ); goto bit_comm; } case 0x40: case 0x41: case 0x42: case 0x43: // BIT b,r case 0x44: case 0x45: case 0x47: case 0x48: case 0x49: case 0x4A: case 0x4B: case 0x4C: case 0x4D: case 0x4F: case 0x50: case 0x51: case 0x52: case 0x53: case 0x54: case 0x55: case 0x57: case 0x58: case 0x59: case 0x5A: case 0x5B: case 0x5C: case 0x5D: case 0x5F: case 0x60: case 0x61: case 0x62: case 0x63: case 0x64: case 0x65: case 0x67: case 0x68: case 0x69: case 0x6A: case 0x6B: case 0x6C: case 0x6D: case 0x6F: case 0x70: case 0x71: case 0x72: case 0x73: case 0x74: case 0x75: case 0x77: case 0x78: case 0x79: case 0x7A: case 0x7B: case 0x7C: case 0x7D: case 0x7F: temp = R8( data & 7 ); bit_comm: int bit = (~data >> 3) & 7; flags &= ~n_flag; flags |= h_flag | z_flag; flags ^= (temp << bit) & z_flag; goto loop; } case 0x86: // RES b,(HL) case 0x8E: case 0x96: case 0x9E: case 0xA6: case 0xAE: case 0xB6: case 0xBE: case 0xC6: // SET b,(HL) case 0xCE: case 0xD6: case 0xDE: case 0xE6: case 0xEE: case 0xF6: case 0xFE: { int temp = READ( rp.hl ); int bit = 1 << ((data >> 3) & 7); temp &= ~bit; if ( !(data & 0x40) ) bit = 0; WRITE( rp.hl, temp | bit ); goto loop; } case 0xC0: case 0xC1: case 0xC2: case 0xC3: // SET b,r case 0xC4: case 0xC5: case 0xC7: case 0xC8: case 0xC9: case 0xCA: case 0xCB: case 0xCC: case 0xCD: case 0xCF: case 0xD0: case 0xD1: case 0xD2: case 0xD3: case 0xD4: case 0xD5: case 0xD7: case 0xD8: case 0xD9: case 0xDA: case 0xDB: case 0xDC: case 0xDD: case 0xDF: case 0xE0: case 0xE1: case 0xE2: case 0xE3: case 0xE4: case 0xE5: case 0xE7: case 0xE8: case 0xE9: case 0xEA: case 0xEB: case 0xEC: case 0xED: case 0xEF: case 0xF0: case 0xF1: case 0xF2: case 0xF3: case 0xF4: case 0xF5: case 0xF7: case 0xF8: case 0xF9: case 0xFA: case 0xFB: case 0xFC: case 0xFD: case 0xFF: R8( data & 7 ) |= 1 << ((data >> 3) & 7); goto loop; case 0x80: case 0x81: case 0x82: case 0x83: // RES b,r case 0x84: case 0x85: case 0x87: case 0x88: case 0x89: case 0x8A: case 0x8B: case 0x8C: case 0x8D: case 0x8F: case 0x90: case 0x91: case 0x92: case 0x93: case 0x94: case 0x95: case 0x97: case 0x98: case 0x99: case 0x9A: case 0x9B: case 0x9C: case 0x9D: case 0x9F: case 0xA0: case 0xA1: case 0xA2: case 0xA3: case 0xA4: case 0xA5: case 0xA7: case 0xA8: case 0xA9: case 0xAA: case 0xAB: case 0xAC: case 0xAD: case 0xAF: case 0xB0: case 0xB1: case 0xB2: case 0xB3: case 0xB4: case 0xB5: case 0xB7: case 0xB8: case 0xB9: case 0xBA: case 0xBB: case 0xBC: case 0xBD: case 0xBF: R8( data & 7 ) &= ~(1 << ((data >> 3) & 7)); goto loop; { int temp; case 0x36: // SWAP (HL) temp = READ( rp.hl ); goto swap_comm; case 0x30: // SWAP B case 0x31: // SWAP C case 0x32: // SWAP D case 0x33: // SWAP E case 0x34: // SWAP H case 0x35: // SWAP L case 0x37: // SWAP A temp = R8( data & 7 ); swap_comm: op = (temp >> 4) | (temp << 4); flags = 0; goto shift_comm; } // Shift/Rotate case 0x06: // RLC (HL) case 0x16: // RL (HL) case 0x26: // SLA (HL) op = READ( rp.hl ); goto rl_comm; case 0x20: case 0x21: case 0x22: case 0x23: case 0x24: case 0x25: case 0x27: // SLA A case 0x00: case 0x01: case 0x02: case 0x03: case 0x04: case 0x05: case 0x07: // RLC A case 0x10: case 0x11: case 0x12: case 0x13: case 0x14: case 0x15: case 0x17: // RL A op = R8( data & 7 ); goto rl_comm; case 0x3E: // SRL (HL) data += 0x10; // bump up to 0x4n to avoid preserving sign bit case 0x1E: // RR (HL) case 0x0E: // RRC (HL) case 0x2E: // SRA (HL) op = READ( rp.hl ); goto rr_comm; case 0x38: case 0x39: case 0x3A: case 0x3B: case 0x3C: case 0x3D: case 0x3F: // SRL A data += 0x10; // bump up to 0x4n case 0x18: case 0x19: case 0x1A: case 0x1B: case 0x1C: case 0x1D: case 0x1F: // RR A case 0x08: case 0x09: case 0x0A: case 0x0B: case 0x0C: case 0x0D: case 0x0F: // RRC A case 0x28: case 0x29: case 0x2A: case 0x2B: case 0x2C: case 0x2D: case 0x2F: // SRA A op = R8( data & 7 ); goto rr_comm; } // CB op assert( false ); // unhandled CB op case 0x07: // RLCA case 0x17: // RLA data = op; op = rg.a; rl_comm: op <<= 1; op |= ((data & flags) >> 4) & 1; // RL and carry is set flags = (op >> 4) & c_flag; // C = bit shifted out if ( data < 0x10 ) // RLC op |= op >> 8; // SLA doesn't fill lower bit goto shift_comm; case 0x0F: // RRCA case 0x1F: // RRA data = op; op = rg.a; rr_comm: op |= (data & flags) << 4; // RR and carry is set flags = (op << 4) & c_flag; // C = bit shifted out if ( data < 0x10 ) // RRC op |= op << 8; op >>= 1; if ( data & 0x20 ) // SRA propagates sign bit op |= (op << 1) & 0x80; shift_comm: data &= 7; if ( !(op & 0xFF) ) flags |= z_flag; if ( data == 6 ) goto write_hl_op_ff; R8( data ) = op; goto loop; // Load case 0x70: // LD (HL),B case 0x71: // LD (HL),C case 0x72: // LD (HL),D case 0x73: // LD (HL),E case 0x74: // LD (HL),H case 0x75: // LD (HL),L case 0x77: // LD (HL),A op = R8( op & 7 ); write_hl_op_ff: WRITE( rp.hl, op & 0xFF ); goto loop; case 0x41: case 0x42: case 0x43: case 0x44: case 0x45: case 0x47: // LD r,r case 0x48: case 0x4A: case 0x4B: case 0x4C: case 0x4D: case 0x4F: case 0x50: case 0x51: case 0x53: case 0x54: case 0x55: case 0x57: case 0x58: case 0x59: case 0x5A: case 0x5C: case 0x5D: case 0x5F: case 0x60: case 0x61: case 0x62: case 0x63: case 0x65: case 0x67: case 0x68: case 0x69: case 0x6A: case 0x6B: case 0x6C: case 0x6F: case 0x78: case 0x79: case 0x7A: case 0x7B: case 0x7C: case 0x7D: R8( (op >> 3) & 7 ) = R8( op & 7 ); goto loop; case 0x08: // LD IND16,SP data = GET_ADDR(); pc += 2; WRITE( data, sp&0xFF ); data++; WRITE( data, sp >> 8 ); goto loop; case 0xF9: // LD SP,HL sp = rp.hl; goto loop; case 0x31: // LD SP,IMM sp = GET_ADDR(); pc += 2; goto loop; case 0x01: // LD BC,IMM case 0x11: // LD DE,IMM r16 [op >> 4] = GET_ADDR(); pc += 2; goto loop; { unsigned temp; case 0xE0: // LD (0xFF00+imm),A temp = data | 0xFF00; pc++; goto write_data_rg_a; case 0xE2: // LD (0xFF00+C),A temp = rg.c | 0xFF00; goto write_data_rg_a; case 0x32: // LD (HL-),A temp = rp.hl; rp.hl = temp - 1; goto write_data_rg_a; case 0x02: // LD (BC),A temp = rp.bc; goto write_data_rg_a; case 0x12: // LD (DE),A temp = rp.de; goto write_data_rg_a; case 0x22: // LD (HL+),A temp = rp.hl; rp.hl = temp + 1; goto write_data_rg_a; case 0xEA: // LD IND16,A (common) temp = GET_ADDR(); pc += 2; write_data_rg_a: WRITE( temp, rg.a ); goto loop; } case 0x06: // LD B,IMM rg.b = data; pc++; goto loop; case 0x0E: // LD C,IMM rg.c = data; pc++; goto loop; case 0x16: // LD D,IMM rg.d = data; pc++; goto loop; case 0x1E: // LD E,IMM rg.e = data; pc++; goto loop; case 0x26: // LD H,IMM rg.h = data; pc++; goto loop; case 0x2E: // LD L,IMM rg.l = data; pc++; goto loop; case 0x36: // LD (HL),IMM WRITE( rp.hl, data ); pc++; goto loop; case 0x3E: // LD A,IMM rg.a = data; pc++; goto loop; // Increment/Decrement case 0x03: // INC BC case 0x13: // INC DE case 0x23: // INC HL r16 [op >> 4]++; goto loop; case 0x33: // INC SP sp = (sp + 1) & 0xFFFF; goto loop; case 0x0B: // DEC BC case 0x1B: // DEC DE case 0x2B: // DEC HL r16 [op >> 4]--; goto loop; case 0x3B: // DEC SP sp = (sp - 1) & 0xFFFF; goto loop; case 0x34: // INC (HL) op = rp.hl; data = READ( op ); data++; WRITE( op, data & 0xFF ); goto inc_comm; case 0x04: // INC B case 0x0C: // INC C (common) case 0x14: // INC D case 0x1C: // INC E case 0x24: // INC H case 0x2C: // INC L case 0x3C: // INC A op = (op >> 3) & 7; R8( op ) = data = R8( op ) + 1; inc_comm: flags = (flags & c_flag) | (((data & 15) - 1) & h_flag) | ((data >> 1) & z_flag); goto loop; case 0x35: // DEC (HL) op = rp.hl; data = READ( op ); data--; WRITE( op, data & 0xFF ); goto dec_comm; case 0x05: // DEC B case 0x0D: // DEC C case 0x15: // DEC D case 0x1D: // DEC E case 0x25: // DEC H case 0x2D: // DEC L case 0x3D: // DEC A op = (op >> 3) & 7; data = R8( op ) - 1; R8( op ) = data; dec_comm: flags = (flags & c_flag) | n_flag | (((data & 15) + 0x31) & h_flag); if ( data & 0xFF ) goto loop; flags |= z_flag; goto loop; // Add 16-bit { blargg_ulong temp; // need more than 16 bits for carry unsigned prev; case 0xF8: // LD HL,SP+imm temp = BOOST::int8_t (data); // sign-extend to 16 bits pc++; flags = 0; temp += sp; prev = sp; goto add_16_hl; case 0xE8: // ADD SP,IMM temp = BOOST::int8_t (data); // sign-extend to 16 bits pc++; flags = 0; temp += sp; prev = sp; sp = temp & 0xFFFF; goto add_16_comm; case 0x39: // ADD HL,SP temp = sp; goto add_hl_comm; case 0x09: // ADD HL,BC case 0x19: // ADD HL,DE case 0x29: // ADD HL,HL temp = r16 [op >> 4]; add_hl_comm: prev = rp.hl; temp += prev; flags &= z_flag; add_16_hl: rp.hl = temp; add_16_comm: flags |= (temp >> 12) & c_flag; flags |= (((temp & 0x0FFF) - (prev & 0x0FFF)) >> 7) & h_flag; goto loop; } case 0x86: // ADD (HL) data = READ( rp.hl ); goto add_comm; case 0x80: // ADD B case 0x81: // ADD C case 0x82: // ADD D case 0x83: // ADD E case 0x84: // ADD H case 0x85: // ADD L case 0x87: // ADD A data = R8( op & 7 ); goto add_comm; case 0xC6: // ADD IMM pc++; add_comm: flags = rg.a; data += flags; flags = ((data & 15) - (flags & 15)) & h_flag; flags |= (data >> 4) & c_flag; rg.a = data; if ( data & 0xFF ) goto loop; flags |= z_flag; goto loop; // Add/Subtract case 0x8E: // ADC (HL) data = READ( rp.hl ); goto adc_comm; case 0x88: // ADC B case 0x89: // ADC C case 0x8A: // ADC D case 0x8B: // ADC E case 0x8C: // ADC H case 0x8D: // ADC L case 0x8F: // ADC A data = R8( op & 7 ); goto adc_comm; case 0xCE: // ADC IMM pc++; adc_comm: data += (flags >> 4) & 1; data &= 0xFF; // to do: does carry get set when sum + carry = 0x100? goto add_comm; case 0x96: // SUB (HL) data = READ( rp.hl ); goto sub_comm; case 0x90: // SUB B case 0x91: // SUB C case 0x92: // SUB D case 0x93: // SUB E case 0x94: // SUB H case 0x95: // SUB L case 0x97: // SUB A data = R8( op & 7 ); goto sub_comm; case 0xD6: // SUB IMM pc++; sub_comm: op = rg.a; data = op - data; rg.a = data; goto sub_set_flags; case 0x9E: // SBC (HL) data = READ( rp.hl ); goto sbc_comm; case 0x98: // SBC B case 0x99: // SBC C case 0x9A: // SBC D case 0x9B: // SBC E case 0x9C: // SBC H case 0x9D: // SBC L case 0x9F: // SBC A data = R8( op & 7 ); goto sbc_comm; case 0xDE: // SBC IMM pc++; sbc_comm: data += (flags >> 4) & 1; data &= 0xFF; // to do: does carry get set when sum + carry = 0x100? goto sub_comm; // Logical case 0xA0: // AND B case 0xA1: // AND C case 0xA2: // AND D case 0xA3: // AND E case 0xA4: // AND H case 0xA5: // AND L data = R8( op & 7 ); goto and_comm; case 0xA6: // AND (HL) data = READ( rp.hl ); pc--; case 0xE6: // AND IMM pc++; and_comm: rg.a &= data; case 0xA7: // AND A flags = h_flag | (((rg.a - 1) >> 1) & z_flag); goto loop; case 0xB0: // OR B case 0xB1: // OR C case 0xB2: // OR D case 0xB3: // OR E case 0xB4: // OR H case 0xB5: // OR L data = R8( op & 7 ); goto or_comm; case 0xB6: // OR (HL) data = READ( rp.hl ); pc--; case 0xF6: // OR IMM pc++; or_comm: rg.a |= data; case 0xB7: // OR A flags = ((rg.a - 1) >> 1) & z_flag; goto loop; case 0xA8: // XOR B case 0xA9: // XOR C case 0xAA: // XOR D case 0xAB: // XOR E case 0xAC: // XOR H case 0xAD: // XOR L data = R8( op & 7 ); goto xor_comm; case 0xAE: // XOR (HL) data = READ( rp.hl ); pc--; case 0xEE: // XOR IMM pc++; xor_comm: data ^= rg.a; rg.a = data; data--; flags = (data >> 1) & z_flag; goto loop; case 0xAF: // XOR A rg.a = 0; flags = z_flag; goto loop; // Stack case 0xF1: // POP FA case 0xC1: // POP BC case 0xD1: // POP DE case 0xE1: // POP HL (common) data = READ( sp ); r16 [(op >> 4) & 3] = data + 0x100 * READ( sp + 1 ); sp = (sp + 2) & 0xFFFF; if ( op != 0xF1 ) goto loop; flags = rg.flags & 0xF0; goto loop; case 0xC5: // PUSH BC data = rp.bc; goto push; case 0xD5: // PUSH DE data = rp.de; goto push; case 0xE5: // PUSH HL data = rp.hl; goto push; case 0xF5: // PUSH FA data = (flags << 8) | rg.a; goto push; // Flow control case 0xFF: if ( pc == idle_addr + 1 ) goto stop; case 0xC7: case 0xCF: case 0xD7: case 0xDF: // RST case 0xE7: case 0xEF: case 0xF7: data = pc; pc = (op & 0x38) + rst_base; goto push; case 0xCC: // CZ pc += 2; if ( flags & z_flag ) goto call; goto loop; case 0xD4: // CNC pc += 2; if ( !(flags & c_flag) ) goto call; goto loop; case 0xDC: // CC pc += 2; if ( flags & c_flag ) goto call; goto loop; case 0xD9: // RETI //interrupts_enabled = 1; goto ret; case 0xC0: // RZ if ( !(flags & z_flag) ) goto ret; goto loop; case 0xD0: // RNC if ( !(flags & c_flag) ) goto ret; goto loop; case 0xD8: // RC if ( flags & c_flag ) goto ret; goto loop; case 0x18: // JR BRANCH( true ) case 0x30: // JR NC BRANCH( !(flags & c_flag) ) case 0x38: // JR C BRANCH( flags & c_flag ) case 0xE9: // JP_HL pc = rp.hl; goto loop; case 0xC3: // JP (next-most-common) pc = GET_ADDR(); goto loop; case 0xC2: // JP NZ pc += 2; if ( !(flags & z_flag) ) goto jp_taken; goto loop; case 0xCA: // JP Z (most common) pc += 2; if ( !(flags & z_flag) ) goto loop; jp_taken: pc -= 2; pc = GET_ADDR(); goto loop; case 0xD2: // JP NC pc += 2; if ( !(flags & c_flag) ) goto jp_taken; goto loop; case 0xDA: // JP C pc += 2; if ( flags & c_flag ) goto jp_taken; goto loop; // Flags case 0x2F: // CPL rg.a = ~rg.a; flags |= n_flag | h_flag; goto loop; case 0x3F: // CCF flags = (flags ^ c_flag) & ~(n_flag | h_flag); goto loop; case 0x37: // SCF flags = (flags | c_flag) & ~(n_flag | h_flag); goto loop; case 0xF3: // DI //interrupts_enabled = 0; goto loop; case 0xFB: // EI //interrupts_enabled = 1; goto loop; // Special case 0xDD: case 0xD3: case 0xDB: case 0xE3: case 0xE4: // ? case 0xEB: case 0xEC: case 0xF4: case 0xFD: case 0xFC: case 0x10: // STOP case 0x27: // DAA (I'll have to implement this eventually...) case 0xBF: case 0xED: // Z80 prefix case 0x76: // HALT s.remain++; goto stop; } // If this fails then the case above is missing an opcode assert( false ); stop: pc--; // copy state back STATIC_CAST(core_regs_t&,r) = rg; r.pc = pc; r.sp = sp; r.flags = flags; this->state = &state_; memcpy( &this->state_, &s, sizeof this->state_ ); return s.remain > 0; }