view Plugins/Output/crossfade/crossfade.c @ 267:38ee4e7f91e6 trunk

[svn] revert changes -- broke the plugin :/
author nenolod
date Thu, 08 Dec 2005 11:47:13 -0800
parents 48f8c5df8d7e
children 1368faba73c9
line wrap: on
line source

/* 
 *  XMMS Crossfade Plugin
 *  Copyright (C) 2000-2004  Peter Eisenlohr <peter@eisenlohr.org>
 *
 *  based on the original OSS Output Plugin
 *  Copyright (C) 1998-2000  Peter Alm, Mikael Alm, Olle Hallnas, Thomas Nilsson and 4Front Technologies
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *  
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
 *  USA.
 */

#ifdef HAVE_CONFIG_H
#  include "config.h"
#endif

#include "crossfade.h"
#include "configure.h"
#include "interface.h"
#include "monitor.h"
#include "support.h"
#include "effect.h"
#include "format.h"
#include "convert.h"
#include "rate.h"
#include "volume.h"
#include "timing.h"

#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <ctype.h>

#ifdef HAVE_DLFCN_H
#  include <dlfcn.h>
#endif
#include <unistd.h>
#include <signal.h>
#include <sys/time.h>
#include <sys/types.h>
#include <sys/ioctl.h>


#undef  DEBUG_HARDCORE

/* output plugin callback prototypes */
static void xfade_init          ();
static void xfade_set_volume    (int  l, int  r);
static void xfade_get_volume    (int *l, int *r);
static gint xfade_open_audio    (AFormat fmt, int rate, int nch);
static void xfade_write_audio   (void *ptr, int length);
static void xfade_close_audio   ();
static void xfade_flush         (int time);
static void xfade_pause         (short paused);
static gint xfade_buffer_free   ();
static gint xfade_buffer_playing();
static gint xfade_written_time  ();
static gint xfade_output_time   ();

/* output plugin callback table */
static OutputPlugin xfade_op =
{
  NULL,
  NULL,
  "Crossfade Plugin " VERSION,
  xfade_init,
  xfade_about,
  xfade_configure,
  xfade_get_volume,
  xfade_set_volume,
  xfade_open_audio,
  xfade_write_audio,
  xfade_close_audio,
  xfade_flush,
  xfade_pause,
  xfade_buffer_free,
  xfade_buffer_playing,
  xfade_output_time,
  xfade_written_time,
};

/* internal prototypes */
static void  load_symbols    ();
static void  output_list_hack();
static gint  open_output     ();
static void  buffer_reset    (buffer_t *buf, config_t *cfg);
static void *buffer_thread_f (void *arg);
static void  sync_output     ();

/* special XMMS symbols (dynamically looked up, see xfade_init) */
static gboolean  *xmms_playlist_get_info_going = NULL;  /* XMMS */
static gboolean  *xmms_is_quitting             = NULL;  /* XMMS */
static gboolean (*input_stopped_for_restart)() = NULL;  /* XMMS */

void fini() __attribute__((destructor));

/* local variables */
static gint      session_id;
static gboolean  realtime;
static gboolean  is_http;

static gint64    streampos;  /* position within current song (input bps) */
static gboolean  playing;
       gboolean  opened;     /* TRUE between open_ and close_audio() */
static gboolean  paused;     /* TRUE: no playback (but still filling buffer) */
static gboolean  stopped;    /* TRUE: stop buffer thread ASAP */
static gboolean  eop;        /* TRUE: wait until buffer is empty then sync() */

static plugin_config_t     the_op_config = DEFAULT_OP_CONFIG;
       OutputPlugin              *the_op = NULL;
       gint                     the_rate = 44100;

static gboolean input_playing = FALSE;

       gboolean output_opened = FALSE;
static gint     output_flush_time = 0;
       gint     output_offset     = 0;
static gint64   output_written    = 0;
       gint64   output_streampos  = 0;

static gboolean finishing = FALSE;  /* TRUE after fini() has been called */

static gchar zero_4k[4096];

#ifdef VOLUME_NORMALIZER
static quantaudio_t qa, last_qa;
static gboolean     have_qa = FALSE, have_last_qa = FALSE;
#endif


/*
 *  Available fade configs:
 * 
 *  fc_start:       First song, only in_len and in_level are used
 *  fc_xfade:       Automatic crossfade at end of song
 *  fc_album:       Like xfade but for consecutive songs of the same album
 *  fc_manual:      Manual crossfade (triggered by Next or Prev)
 *  fc_stop:        Last song, only out_len and out_level are used
 *  fc_eop:         Last song, only out_len and out_level are used
 *
 *  NOTE: As of version 0.2 of xmms-crossfade,
 *        only xfade and manual are implemented.
 *        
 *        With version 0.2.3, fc_album has been added.
 *
 *        With 0.2.4, all configs are implemented:
 *
 *  Available parameters:
 * 
 *              | start | xfade | manual | album | stop |  eop
 *  ------------+-------+-------+--------+-------+------+------
 *  in_len      |   yes |   yes |    yes |    no |   no |   no
 *  in_volume   |   yes |   yes |    yes |    no |   no |   no
 *  offset      |    no |   yes |    yes |    no | +yes | +yes
 *  out_len     |    no |   yes |    yes |    no |  yes |  yes
 *  out_volume  |    no |   yes |    yes |    no |  yes |  yes
 *  flush (*)   |    no |    no |    yes |    no |  yes |   no
 *  ------------+-------+-------+--------+-------+------+------
 *
 *  Parameters marked with (*) are not configureable by the user
 *
 *  The offset parameters for 'stop' and 'eop' is used to store the
 *  length of the additional silence to be added. It may be >= 0 only.
 *
 */

static struct timeval last_close;
static struct timeval last_write;

static gchar *last_filename = NULL;

static format_t in_format;
static format_t out_format;

static buffer_t  the_buffer;
       buffer_t *buffer = &the_buffer;

GStaticMutex buffer_mutex = G_STATIC_MUTEX_INIT;
static GThread	*buffer_thread;

static effect_context_t   effect_context;
static convert_context_t  convert_context;
static rate_context_t     rate_context;
static volume_context_t   volume_context;

static config_t  the_config;
       config_t *config = &the_config;
       config_t  config_default = CONFIG_DEFAULT;

static fade_config_t *fade_config = NULL;


/* this is the entry point for XMMS */
OutputPlugin *get_oplugin_info()
{
  return &xfade_op;
}

OutputPlugin *get_crossfade_oplugin_info()
{
  return &xfade_op;
}

static gint
effect_list_f(gconstpointer a, gconstpointer b)
{
  EffectPlugin *ep = (EffectPlugin *)a;
  gchar      *name = (gchar *)b;

  return strcmp(g_basename(ep->filename), name);
}

static gboolean
open_output_f(gpointer data)
{
  DEBUG(("[crossfade] open_output_f: pid=%d\n", getpid()));
  open_output();
  return FALSE;  /* FALSE = 'do not call me again' */
}

void
xfade_realize_ep_config()
{
  GList        *list, *element;
  EffectPlugin *ep = NULL;

  /* find effect plugin */
  if(config->ep_enable && config->ep_name && (list = get_effect_list()))  /* XMMS */
    if((element = g_list_find_custom(list, config->ep_name, effect_list_f)))
      ep = element->data;

  effect_set_plugin(&effect_context, ep);
}

void
xfade_realize_config()  /* also called by xfade_init() */
{
  /* realize effect plugin config */
  xfade_realize_ep_config();

#ifdef VOLUME_NORMALIZER
  /* update volume normalizer target rms */
  volume_set_target_rms(&volume_context, config->volnorm_target);
#endif

  /* 0.3.0: keep device opened */
  if(config->output_keep_opened && !output_opened) {
    DEBUG(("[crossfade] realize_config: keeping output opened...\n"));

    /* HACK: avoid rate converter complaing about illegal input rate */
    /* if(!rate_context.valid || !rate_context.in_rate)
       rate_config(&rate_context, out_format.rate, out_format.rate); */

    /* 0.3.1: HACK: this will make sure that we start playing silence after startup */
    gettimeofday(&last_close, NULL);

    /* 0.3.1: HACK: Somehow, if we open output here at XMMS startup, there
              will be leftover filedescriptors later when closing output again.
              Opening output in a timeout function seems to work around this... */
    DEBUG(("[crossfade] realize_config: adding timeout (pid=%d)\n", getpid()));
    g_timeout_add(0, open_output_f, NULL);
  }
}

static gint
output_list_f(gconstpointer a, gconstpointer b)
{
  OutputPlugin *op = (OutputPlugin *)a;
  gchar      *name = (gchar *)b;

  return strcmp(g_basename(op->filename), name);
}

static OutputPlugin *
find_output()
{
  GList        *list, *element;
  OutputPlugin *op = NULL;

  /* find output plugin */
  if(config->op_name && (list = get_output_list()))  /* XMMS */
    if((element = g_list_find_custom(list, config->op_name, output_list_f)))
      op = element->data;
    
    if(op == &xfade_op) {
      DEBUG(("[crossfade] find_output: can't use myself as output plugin!\n"));
      op = NULL;
    }
    else if(!op) {
      DEBUG(("[crossfade] find_output: could not find output plugin \"%s\"\n",
	     config->op_name ? config->op_name : "#NULL#"));
    }
    else  /* ok, we have a plugin. last, get its compatibility options */
      xfade_load_plugin_config(config->op_config_string, config->op_name,
			       &the_op_config);

  return op;
}

static gint
open_output()
{
  /* sanity check */
  if(output_opened)
    DEBUG(("[crossfade] open_output: WARNING: output_opened=TRUE!\n"));

  /* reset output_* */
  output_opened     = FALSE;
  output_flush_time = 0;
  output_offset     = 0;
  output_written    = 0;
  output_streampos  = 0;

  /* get output plugin (this will also init the_op_config) */
  if(!(the_op = find_output())) {
    DEBUG(("[crossfade] open_output: could not find any output!\n"));
    return -1;
  }

  /* print output plugin info */
  DEBUG(("[crossfade] open_output: using \"%s\" for output",
	 the_op->description ? the_op->description : "#NULL#"));

  if(realtime)
    DEBUG((" (RT)"));

  if(the_op_config.throttle_enable) 
    DEBUG((realtime
	   ? " (throttled (disabled with RT))"
	   : " (throttled)"));

  if(the_op_config.max_write_enable)
    DEBUG((" (max_write=%d)", the_op_config.max_write_len));

  DEBUG(("\n"));

  /* setup sample rate (note that OUTPUT_RATE is #defined as the_rate) */
  the_rate = config->output_rate;
  
  /* setup out_format. use host byte order for easy math */
  setup_format(FMT_S16_NE, OUTPUT_RATE, OUTPUT_NCH, &out_format);

  /* force re-config of rate converter */
  if(in_format.rate == 0)  /* this happens with keep_output_opened */
    rate_config(&rate_context, out_format.rate, out_format.rate, config->output_quality);
  else
    rate_config(&rate_context, in_format.rate, out_format.rate, config->output_quality);

  /* open plugin */
  if(!the_op->open_audio(out_format.fmt, out_format.rate, out_format.nch)) {
    DEBUG(("[crossfade] open_output: open_audio() failed!\n"));
    the_op = NULL;
    return -1;
  }

  /* clear buffer struct */
  memset(buffer, 0, sizeof(*buffer));
  
  /* calculate buffer size */
  buffer->mix_size     = MS2B(xfade_mix_size_ms(config)) & -4;
  buffer->sync_size    = MS2B(config->sync_size_ms)      & -4;
  buffer->preload_size = MS2B(config->preload_size_ms)   & -4;

  buffer->size         = (buffer->mix_size +     /* mixing area */
			  buffer->sync_size +    /* additional sync */
			  buffer->preload_size); /* preload */

  DEBUG(("[crossfade] open_output: buffer: size=%d (%d+%d+%d=%d ms) (%d Hz)\n",
	 buffer->size,
	 B2MS(buffer->mix_size),
	 B2MS(buffer->preload_size),
	 B2MS(buffer->sync_size),
	 B2MS(buffer->size),
	 the_rate));

  /* allocate buffer */
  if(!(buffer->data = g_malloc0(buffer->size))) {
    DEBUG(("[crossfade] open_output: error allocating buffer!\n"));
    the_op->close_audio();
    the_op = NULL;
    return -1;
  }
  
  /* reset buffer */
  buffer_reset(buffer, config);
  
  /* make sure stopped is TRUE -- otherwise the buffer thread would
   * stop again immediatelly after it has been started. */
  stopped = FALSE;
  
  /* create and run buffer thread */
  buffer_thread = g_thread_create((GThreadFunc)buffer_thread_f, NULL, FALSE, NULL);
  if (buffer_thread == NULL) {
    PERROR("[crossfade] open_output: g_thread_create()");
    g_free(buffer->data);
    the_op->close_audio();
    the_op = NULL;
    return -1;
  }

  /* start updating monitor */
  xfade_start_monitor();

  /* done */
  output_opened = TRUE;
  return 0;
}

static void
xfade_init()
{
  /* load config */
  memset(config, 0, sizeof(*config));
  *config = config_default;
  xfade_load_config();

  /* set default strings if there is no existing config */
  if(!config->op_config_string)
    config->op_config_string = g_strdup(DEFAULT_OP_CONFIG_STRING);
  if(!config->op_name)
    config->op_name = g_strdup(DEFAULT_OP_NAME);

  /* check for realtime priority, it needs some special attention */
  realtime = xmms_check_realtime_priority();

  /* show monitor win if enabled in config */
  xfade_check_monitor_win();

  /* init contexts */
  effect_init(&effect_context, NULL);
  convert_init(&convert_context);
  rate_init(&rate_context);
  volume_init(&volume_context);

  /* reset */
  stopped = FALSE;

  /* find current output plugin early so that volume control works
   * even if playback has not started yet. */
  if(!(the_op = find_output()))
    DEBUG(("[crossfade] init: could not find any output!\n"));

  /* get xmms controlsocket session id */
  session_id = ctrlsocket_get_session_id();

  /* load any dynamic linked symbols */
  load_symbols();
  
  /* HACK: make sure we are at the beginning of XMMS' output plugin list */
  output_list_hack();

  /* realize config -- will also setup the pre-mixing effect plugin */
  xfade_realize_config();
}

static void load_symbols()
{
#ifdef HAVE_DLFCN_H
  void *handle;
  char *error;

  /* open ourselves (that is, the XMMS binary) */
  handle = dlopen(NULL, RTLD_NOW);
  if(!handle) {
    DEBUG(("[crossfade] init: dlopen(NULL) failed!\n"));
    return;
  }

  /* check for XMMS patches */
  DEBUG(("[crossfade] load_symbols: input_stopped_for_restart:"));
  input_stopped_for_restart = dlsym(handle, "input_stopped_for_restart");
  DEBUG((!(error = dlerror()) ? " found\n" : " not found\n"));

  DEBUG(("[crossfade] load_symbols: playlist_get_info_going:"));
  xmms_playlist_get_info_going = dlsym(handle, "playlist_get_info_going");
  DEBUG((!(error = dlerror()) ? " found\n" : " not found\n"));
  
  DEBUG(("[crossfade] load_symbols: is_quitting:"));
  xmms_is_quitting = dlsym(handle, "is_quitting");
  DEBUG((!(error = dlerror()) ? " found\n" : " not found\n"));

  dlclose(handle);
#endif
}

/*
  HACK: Try to move ourselves to the beginning of XMMS output plugin list,
        so that we will be freed first when XMMS is quitting. This way, we
        avoid the segfault when using ALSA as the output plugin.     
*/
static void output_list_hack()
{
  GList *output_list = get_output_list();

  int i0 = g_list_index(output_list, &xfade_op), i1;

  GList *first = g_list_first(output_list);
  GList *xfade = g_list_find (output_list, &xfade_op);
  xfade->data  = first->data;
  first->data  = &xfade_op;

  i1 = g_list_index(output_list, &xfade_op);
  if (i0 != i1)
    DEBUG(("[crossfade] output_list_hack: crossfade moved from index %d to %d\n", i0, i1));
}

void fini()
{
  DEBUG(("[crossfade]\n"));
  DEBUG(("[crossfade] fini: cleanup:\n"));

  /* wait for buffer_thread to stop */
  g_static_mutex_lock(&buffer_mutex);

  /* reset last_close so that the buffer thread will
   * not unnecessarily wait for a timeout. */
  memset(&last_close, 0, sizeof(last_close));

  /* HACK: tell buffer thread not to close output by itself */
  finishing = TRUE;
  paused = FALSE;

  /* wait for buffer thread to clean up and terminate */
  DEBUG(("[crossfade] fini: cleanup: waiting for buffer thread...\n"));
  while(output_opened && finishing) {
    g_static_mutex_unlock(&buffer_mutex);
    xmms_usleep(10000);
    g_static_mutex_lock(&buffer_mutex);
  }
  DEBUG(("[crossfade] fini: cleanup: waiting for buffer thread... done\n"));

  /* HACK: 0.3.5: close output plugin from THIS thread */
  if(output_opened) {
    DEBUG(("[crossfade] fini: cleanup: closing audio...\n"));
    if(the_op->close_audio) the_op->close_audio();
    DEBUG(("[crossfade] fini: cleanup: closing audio... done\n"));
    g_free(buffer->data);
    output_opened = FALSE;
  }
  DEBUG(("[crossfade] fini: cleanup: done\n"));

  g_static_mutex_unlock (&buffer_mutex);

  /* free contexts */
  volume_free(&volume_context);
  rate_free(&rate_context);
  convert_free(&convert_context);
  effect_free(&effect_context);

  /* save configuration (required only for mixer_vol_*) */
  xfade_save_config();

  /* free resources */
  if(config->op_name) g_free(config->op_name);
  xfade_free_config();
  if(last_filename) g_free(last_filename);

  DEBUG(("[crossfade] fini: done.\n"));
}

void
xfade_get_volume(int *l, int *r)
{
  if(config->mixer_software) {
    if(config->mixer_reverse) {
      *l = config->mixer_vol_right;
      *r = config->mixer_vol_left;
    } else {
      *l = config->mixer_vol_left;
      *r = config->mixer_vol_right;
    }
  }
  else {
    if(the_op && the_op->get_volume) {
      if(config->mixer_reverse)
	the_op->get_volume(r, l);
      else
	the_op->get_volume(l, r);
    }
  }
}

void
xfade_set_volume(int l, int r)
{
  if(!config->enable_mixer) return;
  if(config->mixer_software) {
    if(config->mixer_reverse) {
      config->mixer_vol_right = l;
      config->mixer_vol_left  = r;
    }
    else {
      config->mixer_vol_right = r;
      config->mixer_vol_left  = l;
    }
  }
  else {
    if(the_op && the_op->set_volume) {
      if(config->mixer_reverse)
	the_op->set_volume(r, l);
      else
	the_op->set_volume(l, r);
    }
  }
}

/*** buffer stuff ***********************************************************/

static void
buffer_mfg_reset(buffer_t *buf, config_t *cfg)
{
  buf->mix        = 0;
  buf->fade       = 0;
  buf->gap        = (cfg->gap_lead_enable ? MS2B(cfg->gap_lead_len_ms) & -4 : 0);
  buf->gap_len    = buf->gap;
  buf->gap_level  = cfg->gap_lead_level;
  buf->gap_killed = 0;
}

static void
buffer_reset(buffer_t *buf, config_t *cfg)
{
  buffer_mfg_reset(buf, cfg);

  buf->rd_index = 0;
  buf->used     = 0;
  buf->preload  = buf->preload_size;  

  buf->silence     = 0;
  buf->silence_len = 0;
  buf->reopen      = -1;
  buf->pause       = -1;
}

/****************************************************************************/

static void
xfade_apply_fade_config(fade_config_t *fc)
{
  gint avail, out_len, in_len, offset, skip;
  gint index, length, fade, n;
  gfloat out_scale, in_scale;
  gboolean out_len_clipped = FALSE, offset_clipped = FALSE;

  /* Overwrites mix and fade; may add silence */

  /*
   * Example 1: offset < 0 --> mix streams together
   * Example 2: offset > 0 --> insert pause between streams
   * 
   *     |----- out_len -----|    *     |out_len|
   *     |                   |    *     |       |
   * ~~~~~-_        /T~~~~~~~T~~  * ~~~~~\      |               /T~~
   *        ~-_    / |       |    *       \     |              / |
   *           ~-_/  |       |    *        \    |             /  |
   *             /~-_|       |    *         \   |            /   |
   *            /    T-_     |    *          \  |           /    |
   *           /     |  ~-_  |    *           \ |          /     |
   * _________/______|_____~-|__  * ___________\__________/______|__
   *          |in_len|       |    *             |         |in_len|
   *          |<-- offset ---|    *             |offset-->|
   *
   *  a) avail:   max(0, used - preload)
   *  b) out_len: 0 .. avail
   *  c) in_len:  0 .. #
   *  d) offset:  -avail .. buffer->mix_size - out_size
   *  e) skip:    min(used, preload)
   *
   */

  out_scale = 1.0f - (gfloat)xfade_cfg_fadeout_volume(fc) / 100.0f;
  in_scale  = 1.0f - (gfloat)xfade_cfg_fadein_volume (fc) / 100.0f;

  /* rules (see above) */
  /* a */
  avail = buffer->used - buffer->preload_size;
  if(avail < 0) avail = 0;
  
  /* b */
  out_len = MS2B(xfade_cfg_fadeout_len(fc)) & -4;
  if(out_len < 0) out_len = 0;
  if(out_len > avail) {
    DEBUG(("[crossfade] apply_fade_config: WARNING: clipping out_len (%d -> %d)!\n",
	   B2MS(out_len), B2MS(avail)));
    out_len = avail;
    out_len_clipped = TRUE;
  }

  /* c */
  in_len = MS2B(xfade_cfg_fadein_len(fc)) & -4;
  if(in_len < 0) in_len = 0;
  
  /* d */
  offset = MS2B(xfade_cfg_offset(fc)) & -4;
  if(offset < -avail) {
    DEBUG(("[crossfade] apply_fade_config: WARNING: clipping offset (%d -> %d)!\n",
	   B2MS(offset), -B2MS(avail)));
    offset = -avail;
    offset_clipped = TRUE;
  }
  if(offset > (buffer->mix_size - out_len))
    offset = buffer->mix_size - out_len;
  
  /* e */
  skip = buffer->preload_size;
  if(skip > buffer->used) skip = buffer->used;
  
  /* cut off rest of stream (decreases latency on manual songchange) */
  if(fc->flush) {
    gint cutoff = avail - MAX(out_len, -offset);  /* MAX() -> glib.h */
    if(cutoff > 0) {
      DEBUG(("[crossfade] apply_fade_config: %d ms flushed\n", B2MS(cutoff)));
      buffer->used -= cutoff;
      avail        -= cutoff;
    }

    /* make sure there is no pending silence */
    buffer->silence     = 0;
    buffer->silence_len = 0;
  }

  /* begin modifying buffer at index */
  index = (buffer->rd_index + buffer->used - out_len) % buffer->size;
  
  /* fade out (modifies buffer directly) */
  fade = 0;
  length = out_len;
  while(length > 0) {
    gint16 *p = buffer->data + index;
    gint blen = buffer->size - index;
    if(blen > length) blen = length;
    
    for(n = blen/4; n > 0; n--) {
      gfloat factor = 1.0f - (((gfloat)fade / out_len) * out_scale);
      *p = (gfloat)*p * factor; p++;
      *p = (gfloat)*p * factor; p++;
      fade += 4;
    }
    
    index = (index + blen) % buffer->size;
    length -= blen;
  }

  /* Initialize fadein. Note that the actual fading / mixing will be done
   * on-the-fly when audio data is received by xfade_write_audio() */

  /* start fading in */
  if(in_len > 0) {
    buffer->fade = in_len;
    buffer->fade_len = in_len;
    buffer->fade_scale = in_scale;
  }
  else
    buffer->fade = 0;
  
  /* start mixing */
  if(offset < 0) {
    length = -offset;
    buffer->mix = length;
    buffer->used -= length;
  }
  else
    buffer->mix = 0;
  
  /* start silence if applicable (will be applied in buffer_thread_f) */
  if(offset > 0) {
    if((buffer->silence > 0) || (buffer->silence_len > 0))
      DEBUG(("[crossfade] apply_config: WARNING: silence in progress (%d/%d ms)\n",
	     B2MS(buffer->silence), B2MS(buffer->silence_len)));
    
    buffer->silence     = buffer->used;
    buffer->silence_len = offset;
  }
  
  /* done */
  DEBUG(("[crossfade] apply_fade_config: avail=%d out=%d in=%d offset=%d skip=%d\n",
	 B2MS(avail), B2MS(out_len), B2MS(in_len), B2MS(offset), B2MS(skip)));
}

static gint
extract_track(gchar *name)
{
  /* Remove all but numbers.
   * Will not work if a filename has number in the title, like "track-03-U2.mp3" 
   * Ideally, should look into id3 track entry and fallback to filename
   * */

  gchar temp[8];
  int t = 0 ;
  
  memset(temp,0,sizeof(temp));
  while(*name != '\0' && t < sizeof(temp)) {
    if(strcmp(name,"mp3") == 0)
      break;
    if(isdigit(*name))
      temp[t++] = *name;
    name++;
  }
  return atoi(temp);
}

static gint
album_match(gchar *old, gchar *new)
{
  gchar *old_dir, *new_dir;
  gboolean same_dir;
  gint old_track = 0, new_track = 0;

  if(!old || !new) return 0;

  old_dir = g_dirname(old);
  new_dir = g_dirname(new);
  same_dir = !strcmp(old_dir, new_dir);
  g_free(old_dir);
  g_free(new_dir);

  if(!same_dir) {
    DEBUG(("[crossfade] album_match: "
	   "no match (different dirs)\n"));
    return 0;
  }

  old_track = extract_track(g_path_get_basename(old));
  new_track = extract_track(g_path_get_basename(new));
  
  if(new_track <= 0) {
    DEBUG(("[crossfade] album_match: can't parse track number:\n"));
    DEBUG(("[crossfade] album_match: ... \"%s\"\n", g_basename(new)));
    return 0;
  }

  if((old_track < 0) || (old_track+1 != new_track)) {
    DEBUG(("[crossfade] album_match: "
	   "no match (same dir, but non-successive (%d, %d))\n",
	   old_track, new_track));
    return 0;
  }
  
  DEBUG(("[crossfade] album_match: "
	 "match detected (same dir, successive tracks (%d, %d))\n",
	 old_track, new_track));
  
  return old_track;
}

static gint
xfade_open_audio(AFormat fmt, int rate, int nch)
{
  gint   pos;
  gchar *file;

  struct timeval tv;
  glong          dt;

  DEBUG(("[crossfade]\n"));
  DEBUG(("[crossfade] open_audio: XMMS-crossfade "VERSION"\n"));

#if 0
  DEBUG(("[crossfade] open_audio: pid=%d\n", getpid()));
#endif

  /* sanity... don't do anything about it */
  if(opened)
    DEBUG(("[crossfade] open_audio: WARNING: already opened!\n"));

  /* get filename */
#ifdef HAVE_PLAYLIST_GET_FILENAME
  pos  = get_playlist_position();     /* XMMS */
  file = playlist_get_filename(pos);  /* XMMS */
#else
  pos  = xmms_remote_get_playlist_pos (session_id);
  file = xmms_remote_get_playlist_file(session_id, pos);
#endif
  DEBUG(("[crossfade] open_audio: bname=\"%s\"\n", g_basename(file)));

  /* is this an automatic crossfade? */
  if(last_filename && (fade_config == &config->fc[FADE_CONFIG_XFADE])) {
    /* check if next song is the same as the current one */
    if(config->no_xfade_if_same_file && !strcmp(last_filename, file)) {
      DEBUG(("[crossfade] open_audio: same file, disabling crossfade\n"));
      fade_config = &config->fc[FADE_CONFIG_ALBUM];
    }

    /* check if next song is the next song from the same album */
    else if(config->album_detection && album_match(last_filename, file)) {
      gboolean use_fc_album = FALSE;

      if(xfade_cfg_gap_trail_enable(config)) {
	DEBUG(("[crossfade] album_match: "
	       "trailing gap: length=%d/%d ms\n",
	       B2MS(buffer->gap_killed), B2MS(buffer->gap_len)));
	
	if(buffer->gap_killed < buffer->gap_len) {
	  DEBUG(("[crossfade] album_match: "
		 "trailing gap: -> no silence, probably pre-faded\n"));
	  use_fc_album = TRUE;
	}
	else {
	  DEBUG(("[crossfade] album_match: "
		 "trailing gap: -> silence, sticking to XFADE\n"));
	}
      }
      else {
	DEBUG(("[crossfade] album_match: "
	       "trailing gap killer disabled\n"));
	use_fc_album = TRUE;
      }
       
      if(use_fc_album) {
	DEBUG(("[crossfade] album_match: "
	       "-> using FADE_CONFIG_ALBUM\n"));
	fade_config = &config->fc[FADE_CONFIG_ALBUM];
      }
    }
    g_free(last_filename);
  }
  last_filename = g_strdup(file); 

#if 0
  /* FIXME: finish this */
  /* Check if this is a short song. */
  if(fade_config == &config->fc[FADE_CONFIG_XFADE]) {
    DEBUG(("*** XFADE:\n"));
    int current_length = playlist_get_current_length();
    DEBUG(("*** length=%d\n", current_length));
    if (current_length < 30*1000)
      fade_config = &config->fc[FADE_CONFIG_ALBUM];
  }
#endif

#ifdef VOLUME_NORMALIZER
  /* turn off volume normalizing per default, until we get a target RMS for this song */
  volume_set_active(&volume_context, FALSE);

  /* thomas: add support for quantaudio per-song mixing info */
  if(config->volnorm_use_qa) {
    /* remember timing info from last song */
    last_qa = qa;
    have_last_qa = have_qa;

    /* try to read quantaudio comment from ID3v1 tag */
    have_qa = get_timing_comment(file, &qa);
    if(have_qa) {
      DEBUG(("[crossfade] open_audio: quantaudio comment found:\n"));
      DEBUG(("[crossfade] open_audio: ... RMS=%d, mix_in=%.2f, mix_out=%.2f, length=%.2f\n",
	     qa.RMS, qa.mix_in, qa.mix_out, qa.length));
      volume_set_song_rms(&volume_context, qa.RMS);
      volume_set_active  (&volume_context, TRUE);
    }
    else
      DEBUG(("[crossfade] open_audio: no quantaudio comment found\n"));
    
#if 0
    /* configure fade_config with fadeout from last song and fadein from new song */
    if(fade_config) {
      config->fc[FADE_CONFIG_TIMING].out_enable = fade_config->out_enable;
      config->fc[FADE_CONFIG_TIMING].out_volume = fade_config->out_volume;
      config->fc[FADE_CONFIG_TIMING].out_len_ms = fade_config->out_len_ms;
      config->fc[FADE_CONFIG_TIMING].ofs_custom_ms = 0;
      config->fc[FADE_CONFIG_TIMING].in_enable  = fade_config->in_enable;
      config->fc[FADE_CONFIG_TIMING].in_volume  = fade_config->in_volume;
      config->fc[FADE_CONFIG_TIMING].in_len_ms  = fade_config->in_len_ms;
      
      if(have_last_qa && ((fade_config->config == FADE_CONFIG_XFADE) ||
			  (fade_config->config == FADE_CONFIG_ALBUM))) {
	fade_config = &config->fc[FADE_CONFIG_TIMING];
	fade_config->out_enable    = TRUE;
	fade_config->out_volume    = 0;
        fade_config->out_len_ms    = (gint)((last_qa.length - last_qa.mix_out) * 1000);
	fade_config->ofs_custom_ms = - fade_config->out_len_ms;  /* FIXME: */
	DEBUG(("[crossfade] open_audio: CONFIG_TIMING: using last song's fadeout parameter\n"));
      }
      
      if(have_qa && ((fade_config->config == FADE_CONFIG_XFADE) ||
		     (fade_config->config == FADE_CONFIG_ALBUM) ||
		     (fade_config->config == FADE_CONFIG_MANUAL))) {
	fade_config = &config->fc[FADE_CONFIG_TIMING];
	fade_config->in_enable = TRUE;
	fade_config->in_volume = 0;
	fade_config->in_len_ms = (gint)(qa.mix_in * 1000);
	DEBUG(("[crossfade] open_audio: CONFIG_TIMING: using new song's fadein parameter\n"));
      }
    }
#endif
  }
  else have_qa = FALSE;
  /* thomas: end */
  
  if(volume_context.active && config->volnorm_enable)
    DEBUG(("[crossfade] open_audio: volume normalizer: factor=%.3f\n",
	   volume_context.factor));
#endif
  
  /* check for HTTP streaming */
  if(config->enable_http_workaround && (0 == strncasecmp(file, "http://", 7))) {
    DEBUG(("[crossfade] open_audio: HTTP underrun workaround enabled.\n"));
    is_http = TRUE;
  }
  else
    is_http = FALSE;
  
  /* lock buffer */
  g_static_mutex_lock(&buffer_mutex);

  /* reset writer timeout */
  gettimeofday(&last_write, NULL);

  /* calculate time since last close() (don't care about overflows at 24h) */
  if(output_opened) {
    gettimeofday(&tv, NULL);
    dt = (tv.tv_sec - last_close.tv_sec)  * 1000
      + (tv.tv_usec - last_close.tv_usec) / 1000;
  }
  else
    dt = 0;

  DEBUG(("[crossfade] open_audio: fmt=%s rate=%d nch=%d dt=%ld ms\n",
	 format_name(fmt), rate, nch, dt));
  
  /* check format */
  if(setup_format(fmt, rate, nch, &in_format) < 0) {
    DEBUG(("[crossfade] open_audio: format not supported!\n"));
    return 0;
  }

  /* (re)open the device if necessary */
  if(!output_opened) {
    if(open_output()) {
      DEBUG(("[crossfade] open_audio: error opening/configuring output!\n"));
      g_static_mutex_unlock(&buffer_mutex);
      return 0;
    }
    fade_config = &config->fc[FADE_CONFIG_START];
  }

  /* reset */
  streampos = 0;
  playing   = TRUE;
  opened    = TRUE;
  paused    = FALSE;

  /* reset mix/fade/gap */
  buffer_mfg_reset(buffer, config);

  /* enable gap killer / zero crossing only for automatic/album songchange */
  switch(fade_config->config) {
  case FADE_CONFIG_XFADE:
  case FADE_CONFIG_ALBUM:
    break;
  default:;
    buffer->gap = GAP_SKIPPING_DONE;
  }

  /* restart realtime throttling */
  output_written = 0;

  /* start mixing */
  switch(fade_config ? fade_config->type : -1) {
  case FADE_TYPE_FLUSH:
    DEBUG(("[crossfade] open_audio: FLUSH:\n"));

    /* flush output plugin */
    the_op->flush(0);
    output_streampos = 0;

    /* flush buffer */
    buffer_reset(buffer, config);

    /* apply fade config (pause/fadein after flush) */
    xfade_apply_fade_config(fade_config);
    
    /* also repopen device (if configured so in the plugin compat. options) */
    if(the_op_config.force_reopen) {
      buffer->reopen = 0;
      buffer->reopen_sync = FALSE;
    }
    break;

  case FADE_TYPE_REOPEN:
    DEBUG(("[crossfade] open_audio: REOPEN:\n"));

    /* flush buffer if applicable */
    if(fade_config->flush)
      buffer_reset(buffer, config);

    if(buffer->reopen >= 0)
      DEBUG(("[crossfade] open_audio: REOPEN: WARNING: reopen in progress (%d ms)\n",
	     B2MS(buffer->reopen)));
    
    /* start reopen countdown (will be executed in buffer_thread_f) */
    buffer->reopen = buffer->used;  /* may be 0 */
    buffer->reopen_sync = FALSE;
    break;

  case FADE_TYPE_NONE:
  case FADE_TYPE_PAUSE:
  case FADE_TYPE_SIMPLE_XF:
  case FADE_TYPE_ADVANCED_XF:
  case FADE_TYPE_FADEIN:
  case FADE_TYPE_FADEOUT:
    DEBUG(("[crossfade] open_audio: XFADE:\n"));
    
    /* apply fade config (do fadeout, init mix/fade/gap, add silence) */
    xfade_apply_fade_config(fade_config);
    
    /* set reopen countdown. after buffer_thread_f has written
     * buffer->reopen bytes, it will close/reopen the output plugin. */
    if(the_op_config.force_reopen && !(fade_config->config == FADE_CONFIG_START)) {
      if(buffer->reopen >= 0) 
	DEBUG(("[crossfade] open_audio: XFADE: WARNING: reopen in progress (%d ms)\n",
	       B2MS(buffer->reopen)));
      buffer->reopen = buffer->used;
      buffer->reopen_sync = TRUE;
    }
    break;
  }

  /* calculate offset of the output plugin */
  output_offset = the_op->written_time() + B2MS(buffer->used) + B2MS(buffer->silence_len);

  /* unlock buffer */
  g_static_mutex_unlock(&buffer_mutex);

  /* done */
  return 1;
}

void
xfade_write_audio(void *ptr, int length)
{
  gint     free;
  gint     ofs = 0;
  format_t format;

#ifdef DEBUG_HARDCORE
  DEBUG(("[crossfade] write_audio: ptr=0x%08lx, length=%d\n", (long)ptr, length));
#endif

  /* sanity */
  if(length <= 0) return;
  if(length & 3) {
    DEBUG(("[crossfade] write_audio: truncating %d bytes!\n", length & 3));
    length &= -4;
  }

  /* update input accumulator (using input format size) */
  streampos += length;

  /* apply pre-mixing effect (NOTE: format might change!) */
  format_copy(&format, &in_format);
  length = effect_flow(&effect_context, (gpointer*)&ptr, length, &format, TRUE);
  
  /* convert sample format (signed-16bit-ne 44100hz stereo) */
  length = convert_flow(&convert_context, (gpointer*)&ptr, length, &format);

  /* convert rate */
  if(!rate_context.valid || (rate_context.in_rate != format.rate))
    rate_config(&rate_context, format.rate, out_format.rate, config->output_quality);
  
  length = rate_flow(&rate_context, (gpointer*)&ptr, length);

#ifdef VOLUME_NORMALIZER
  /* normalize volume */
  if(config->volnorm_enable)
    volume_flow(&volume_context, (gpointer*)&ptr, length);
#endif

  /* lock buffer */
  g_static_mutex_lock(&buffer_mutex);

  /* check if device has been closed, reopen if necessary */
  if(!output_opened) {
    if(open_output()) {
      DEBUG(("[crossfade] write_audio: reopening failed!\n"));
      g_static_mutex_unlock(&buffer_mutex);
      return;
    }
  }

  /* reset timeout */
  gettimeofday(&last_write, NULL);

  /* calculate free buffer space, check for overflow (should never happen :) */
  free = buffer->size - buffer->used;
  if(length > free) {
    DEBUG(("[crossfade] write_audio: %d bytes truncated!\n", length-free));
    length = free;
  }

  /* kill leading gap */
  if((length > 0) && (buffer->gap > 0)) {
    gint   blen = MIN(length, buffer->gap);
    gint16   *p = ptr;
    gint  index = 0;

    gint16 left, right;
    while(index < blen) {
      left = *p++, right = *p++;
      if(ABS(left) >= buffer->gap_level) break;
      if(ABS(right) >= buffer->gap_level) break;
      index += 4;
    }
    
    buffer->gap -= index;
    length -= index;
    ptr += index;

    if((index < blen) || (buffer->gap <= 0)) {
      buffer->gap_killed = buffer->gap_len - buffer->gap;
      buffer->gap = 0;

      DEBUG(("[crossfade] write_audio: leading gap size: %d/%d ms\n",
	     B2MS(buffer->gap_killed), B2MS(buffer->gap_len)));

      /* fix streampos */
      streampos -= (gint64)buffer->gap_killed * in_format.bps / out_format.bps;
    }
  }

  /* start skipping to next crossing (if enabled) */
  if(buffer->gap == 0) {
    if(config->gap_crossing) {
      buffer->gap = GAP_SKIPPING_POSITIVE;
      buffer->gap_skipped = 0;
    }
    else 
      buffer->gap = GAP_SKIPPING_DONE;
  }

  /* skip until next zero crossing (pos -> neg) */
  if((length > 0) && (buffer->gap == GAP_SKIPPING_POSITIVE)) {
    gint16   *p = ptr;
    gint  index = 0;

    gint16 left;
    while(index < length) {
      left = *p++; p++;
      if(left < 0) break;
      index += 4;
    }

    buffer->gap_skipped += index;
    length -= index;
    ptr += index;

    if(index < length)
      buffer->gap = GAP_SKIPPING_NEGATIVE;
  }

  /* skip until next zero crossing (neg -> pos) */
  if((length > 0) && (buffer->gap == GAP_SKIPPING_NEGATIVE)) {
    gint16   *p = ptr;
    gint  index = 0;

    gint16 left;
    while(index < length) {
      left = *p++; p++;
      if(left >= 0) break;
      index += 4;
    }

    buffer->gap_skipped += index;
    length -= index;
    ptr += index;

    if(index < length) {
      DEBUG(("[crossfade] write_audio: %d samples to next crossing\n",
	     buffer->gap_skipped));
      buffer->gap = GAP_SKIPPING_DONE;
    }
  }

  /* update preload. the buffer thread will not write any
   * data to the device before preload is decreased below 1. */
  if((length > 0) && (buffer->preload > 0))
    buffer->preload -= length;

  /* fadein -- FIXME: is modifying the input/effect buffer safe? */
  if((length > 0) && (buffer->fade > 0)) {
    gint16 *p = ptr;
    gint blen = MIN(length, buffer->fade);
    gint    n;

    for(n = blen/4; n > 0; n--) {
      gfloat factor = 1.0f - (((gfloat)buffer->fade / buffer->fade_len) * buffer->fade_scale);
      *p = (gfloat)*p * factor; p++;
      *p = (gfloat)*p * factor; p++;
      buffer->fade -= 4;
    }
  }
  
  /* mix */
  while((length > 0) && (buffer->mix > 0)) {
    gint wr_index = (buffer->rd_index + buffer->used) % buffer->size;
    gint     blen = buffer->size - wr_index;
    gint16    *p1 = buffer->data + wr_index;
    gint16    *p2 = ptr + ofs;
    gint        n;

    if(blen > length) blen = length;
    if(blen > buffer->mix) blen = buffer->mix;

    for(n = blen/2; n > 0; n--) {
      gint out = (gint)*p1 + *p2++;  /* add */
      if(out > 32767)                /* clamp */
	*p1++ = 32767;
      else if(out < -32768)
	*p1++ = -32768;
      else
	*p1++ = out;
    }
    
    buffer->used += blen;
    buffer->mix -= blen;
    length -= blen;
    ofs += blen;
  }

  /* normal write */
  while(length > 0) {
    gint wr_index = (buffer->rd_index + buffer->used) % buffer->size;
    gint     blen = buffer->size - wr_index;

    if(blen > length) blen = length;

    memcpy(buffer->data + wr_index, ptr + ofs, blen);
    
    buffer->used += blen;
    length -= blen;
    ofs += blen;
  }

  /* unlock buffer */
  g_static_mutex_unlock(&buffer_mutex);
#ifdef DEBUG_HARDCORE
  DEBUG(("[crossfade] write_audio: done.\n"));
#endif
}

/* sync_output: wait for output plugin to finish playback  */
/*              is only called from within buffer_thread_f */
static void sync_output()
{
  glong dt, total;
  gint  opt, opt_last;
  struct timeval tv, tv_start, tv_last_change;
  gboolean was_closed = !opened;

  if(!the_op->buffer_playing || !the_op->buffer_playing()) {
    DEBUG(("[crossfade] sync_output: nothing to do\n"));
    return;
  }

  DEBUG(("[crossfade] sync_output: waiting for plugin...\n"));

  dt = 0;
  opt_last = 0;
  gettimeofday(&tv_start, NULL);
  gettimeofday(&tv_last_change, NULL);

  while((dt < SYNC_OUTPUT_TIMEOUT)
	&& !stopped
	&& output_opened
	&& !(was_closed && opened)
	&& the_op && the_op->buffer_playing()) {

    /* use output_time() to check if the output plugin is still active */
    if(the_op->output_time) {
      opt = the_op->output_time();
      if(opt != opt_last) {
	/* output_time has changed */
	opt_last = opt;
	gettimeofday(&tv_last_change, NULL);
      }
      else {
	/* calculate time since last change of the_op->output_time() */
	gettimeofday(&tv, NULL);
	dt = (tv.tv_sec - tv_last_change.tv_sec)  * 1000
	  + (tv.tv_usec - tv_last_change.tv_usec) / 1000;
      }
    }
    
    /* yield */
    g_static_mutex_unlock(&buffer_mutex);
    xmms_usleep(10000);
    g_static_mutex_lock(&buffer_mutex);
  }

  /* calculate total time we spent in here */
  gettimeofday(&tv, NULL);
  total = (tv.tv_sec - tv_start.tv_sec)  * 1000
    +    (tv.tv_usec - tv_start.tv_usec) / 1000;
  
  /* print some debug info */
  if(stopped)
    DEBUG(("[crossfade] sync_output: ... stopped\n"))
  else if(was_closed && opened)
    DEBUG(("[crossfade] sync_output: ... reopened\n"))
  else if(dt >= SYNC_OUTPUT_TIMEOUT)
    DEBUG(("[crossfade] sync_output: ... TIMEOUT! (%ld ms)\n", total))
  else
    DEBUG(("[crossfade] sync_output: ... done (%ld ms)\n", total));
}

void *
buffer_thread_f(void *arg)
{
  gpointer data;
  gint     sync;
  gint     op_free;
  gint     length_bak, length, blen;
  glong    timeout, dt;
  gboolean stopping;

  struct timeval tv;
  struct timeval mark;

  DEBUG(("[crossfade] buffer_thread_f: thread started (pid=%d)\n",
	 (int)getpid()));
  
  /* lock buffer */
  g_static_mutex_lock(&buffer_mutex);

  while(!stopped) {
    /* yield */
#ifdef DEBUG_HARDCORE
    DEBUG(("[crossfade] buffer_thread_f: yielding...\n"));
#endif
    g_static_mutex_unlock(&buffer_mutex);
    xmms_usleep(10000);
    g_static_mutex_lock(&buffer_mutex);

    /* --------------------------------------------------------------------- */

    stopping = FALSE;
    
    /* V0.3.0: New timeout detection */
    if(!opened) {
      gboolean current = bmp_playback_get_playing();  /* BEEP */

      /* also see fini() */
      if(last_close.tv_sec || last_close.tv_usec) {
	gettimeofday(&tv, NULL);
	timeout = (tv.tv_sec - last_close.tv_sec)  * 1000
	  +      (tv.tv_usec - last_close.tv_usec) / 1000;
      }
      else 
	timeout = -1;

      if(current != input_playing) {
	input_playing = current;
	if(current)
	  DEBUG(("[crossfade] buffer_thread_f:"
		 " input restarted after %ld ms\n", timeout))
	else
	  DEBUG(("[crossfade] buffer_thread_f:"
		 " input stopped after + %ld ms\n", timeout));
      }

      /* 0.3.0: HACK: output_keep_opened: play silence during prebuffering */
      if(input_playing && config->output_keep_opened && (buffer->used == 0)) {
	buffer->silence     = 0;
	buffer->silence_len = MS2B(100);
      }

      /* FIXME: make timeout configureable */
      if(((timeout < 0) || (timeout >= 100)) && !input_playing) {
	if(playing)
	  DEBUG(("[crossfade] buffer_thread_f: timeout:"
		 " input did not restart after %ld ms (playing=%d)\n", timeout, playing));
	stopping = TRUE;
      }
    }

    /* V0.2.4: Moved the timeout checks in front of the buffer_free() check
     *         below. Before, buffer_thread_f could (theoretically) loop
     *         endlessly if buffer_free() returned 0 all the time. */

    /* calculate time since last write to the buffer (ignore overflows) */
    gettimeofday(&tv, NULL);
    timeout = (tv.tv_sec - last_write.tv_sec)  * 1000
      +      (tv.tv_usec - last_write.tv_usec) / 1000;

    /* check for timeout/eop (note this is the only way out of this loop) */
    if(stopping) {
      if(playing) {
	DEBUG(("[crossfade] buffer_thread_f: timeout: manual stop\n"));

	/* if CONFIG_STOP is of TYPE_NONE, immediatelly close the device... */
	if((config->fc[FADE_CONFIG_STOP].type == FADE_TYPE_NONE)
	   && !config->output_keep_opened) break;

	/* special handling for pause */
	if(paused) {
	  DEBUG(("[crossfade] buffer_thread_f: timeout: paused, closing now...\n"));
	  paused = FALSE;
	  if(config->output_keep_opened)
	    the_op->pause(0);
	  else
	    break;
	}
	else if(buffer->pause >= 0) {
	  DEBUG(("[crossfade] buffer_thread_f: timeout: cancelling pause countdown\n"));
	  buffer->pause = -1;
	}

	/* ...otherwise, do the fadeout first */
	xfade_apply_fade_config(&config->fc[FADE_CONFIG_STOP]);

	/* force CONFIG_START in case the user restarts playback during fadeout */
	fade_config = &config->fc[FADE_CONFIG_START];
	playing = FALSE;
	eop = TRUE;
      }
      else {
	if(!eop) {
	  DEBUG(("[crossfade] buffer_thread_f: timeout: end of playback\n"));

	  /* 0.3.3: undo trailing gap killer at end of playlist */
	  if(buffer->gap_killed) {
	    buffer->used += buffer->gap_killed;
	    DEBUG(("[crossfade] buffer_thread_f: timeout:"
	           " undoing trailing gap (%d ms)\n", B2MS(buffer->gap_killed)));
	  }
	  
	  /* do the fadeout if applicable */
	  if(config->fc[FADE_CONFIG_EOP].type != FADE_TYPE_NONE)
	    xfade_apply_fade_config(&config->fc[FADE_CONFIG_EOP]);

	  fade_config = &config->fc[FADE_CONFIG_START];  /* see above */
	  eop = TRUE;
	}
	
	if(buffer->used == 0) {
	  if(config->output_keep_opened) {
	    /* 0.3.0: play silence while keeping the output opened */
	    buffer->silence     = 0;
	    buffer->silence_len = MS2B(100);
	  }
	  else if(buffer->silence_len <= 0) {
	    sync_output();
	    if(opened) {
	      DEBUG(("[crossfade] buffer_thread_f: timeout, eop: device has been reopened\n"));
	      DEBUG(("[crossfade] buffer_thread_f: timeout, eop: -> continuing playback\n"));
	      eop = FALSE;
	    }
	    else {
	      DEBUG(("[crossfade] buffer_thread_f: timeout, eop: closing output...\n"));
	      break;
	    }
	  }
	}
      }
    }
    else
      eop = FALSE;

    /* --------------------------------------------------------------------- */

    /* get free space in device output buffer
     * NOTE: disk_writer always returns <big int> here */
    op_free = the_op->buffer_free() & -4;

    /* continue waiting if there is no room in the device buffer */
    if(op_free == 0) continue;

    /* --- Limit OP buffer use (decreases latency) ------------------------- */

    /* HACK: limit output plugin buffer usage to decrease latency */
    if(config->enable_op_max_used) {
      gint output_time  = the_op->output_time();
      gint output_used  = the_op->written_time() - output_time;
      gint output_limit = MS2B(config->op_max_used_ms - MIN(output_used, config->op_max_used_ms));

      if(output_flush_time != output_time) {
#ifdef SONGCHANGE_TIMEOUT
	if(timeout < config->songchange_timeout) {
	  /* slow down output, but always write _some_ data */
	  if(output_limit < in_format.bps/100/2)
	    output_limit = in_format.bps/100/2;

	  if(op_free > output_limit)
	    op_free = output_limit;
	}
	else {
	  if((output_used < config->op_max_used_ms) && (op_free > output_limit))
	    op_free = output_limit;
	  else
	    op_free = MIN(op_free, 2304);  /* avoid 0 */
	}
#else
	/* slow down output, but always write _some_ data */
	if(output_limit < in_format.bps/100/2)
	  output_limit = in_format.bps/100/2;
	
	if(op_free > output_limit)
	  op_free = output_limit;
#endif
      }
    }

    /* --- write silence --------------------------------------------------- */

    if(!paused && (buffer->silence <= 0) && (buffer->silence_len >= 4)) {
      /* write as much silence as a) there is left and b) the device can take */
      length = buffer->silence_len;
      if(length > op_free) length = op_free;
      
      /* make sure we always operate on stereo sample boundary */
      length &= -4;

      /* HACK: don't stay in here too long when in realtime mode (see below) */
      if(realtime) gettimeofday(&mark, NULL);

      /* write length bytes to the device */
      length_bak = length;
      while(length > 0) {
	data = zero_4k;
	blen = sizeof(zero_4k);
	if(blen > length) blen = length;

	/* make sure zero_4k is cleared. The effect plugin within
	 * the output plugin may have modified this buffer! (0.2.8) */
	memset(zero_4k, 0, blen);

	/* HACK: the original OSS plugin hangs when writing large
         * blocks (greater than device buffer size) in realtime mode */
	if(the_op_config.max_write_enable && (blen > the_op_config.max_write_len))
	  blen = the_op_config.max_write_len;

	/* finally, write data */
	the_op->write_audio(data, blen);
	length -= blen;
	
	/* HACK: don't stay in here too long (force yielding every 10 ms) */
	if(realtime) {
	  gettimeofday(&tv, NULL);
	  dt = (tv.tv_sec - mark.tv_sec)  * 1000 
	    + (tv.tv_usec - mark.tv_usec) / 1000;
	  if(dt >= 10) break;
	}
      }

      /* calculate how many bytes actually have been written */
      length = length_bak - length;
    }

    else /* --- write data ------------------------------------------------- */

    if(!paused && (buffer->preload <= 0) && (buffer->used >= 4)) {
      /* write as much data as a) is available and b) the device can take */
      length = buffer->used;
      if(length > op_free) length = op_free;

      /* HACK: throttle output (used with fast output plugins) */
      if(the_op_config.throttle_enable && !realtime && opened
#ifdef SONGCHANGE_TIMEOUT
	 && (timeout < config->songchange_timeout)
#endif
	 ) {
	sync = buffer->sync_size - (buffer->size - buffer->used);
	if(sync < 0)
	  length = 0;
	else if(sync < length)
	  length = sync;
      }

      /* clip length to silence countdown (if applicable) */
      if((buffer->silence >= 4) && (length > buffer->silence))
	length = buffer->silence;

      /* clip length to reopen countdown (if applicable) */
      if((buffer->reopen >= 0) && (length > buffer->reopen))
	length = buffer->reopen;

      /* clip length to pause countdown (if applicable) */
      if((buffer->pause >= 0) && (length > buffer->pause))
	length = buffer->pause;

      /* make sure we always operate on stereo sample boundary */
      length &= -4;

      /* HACK: don't stay in here too long when in realtime mode (see below) */
      if(realtime) gettimeofday(&mark, NULL);

      /* write length bytes to the device */
      length_bak = length;
      while(length > 0) {
	data = buffer->data + buffer->rd_index;
	blen = buffer->size - buffer->rd_index;
	if(blen > length) blen = length;

	/* HACK: the original OSS plugin hangs when writing large
         * blocks (greater than device buffer size) in realtime mode */
	if(the_op_config.max_write_enable
	   && (blen > the_op_config.max_write_len))
	  blen = the_op_config.max_write_len;

	/* finally, write data */
	the_op->write_audio(data, blen);

	buffer->rd_index = (buffer->rd_index + blen) % buffer->size;
	buffer->used -= blen;
	length -= blen;
	
	/* HACK: don't stay in here too long (force yielding every 10 ms) */
	if(realtime) {
	  gettimeofday(&tv, NULL);
	  dt = (tv.tv_sec - mark.tv_sec)  * 1000 
	    + (tv.tv_usec - mark.tv_usec) / 1000;
	  if(dt >= 10) break;
	}
      }

      /* calculate how many bytes actually have been written */
      length = length_bak - length;
    }
    else
      length = 0;

    /* update realtime throttling */
    output_written   += length;
    output_streampos += length;

    /* --- check countdowns ------------------------------------------------ */

    if(buffer->silence > 0) {
      buffer->silence -= length;
      if(buffer->silence < 0)
	DEBUG(("[crossfade] buffer_thread_f: WARNING: silence overrun: %d\n",
	       buffer->silence));
    }
    else if(buffer->silence_len > 0) {
      buffer->silence_len -= length;
      if(buffer->silence_len <= 0) {
	if(buffer->silence_len < 0)
	  DEBUG(("[crossfade] buffer_thread_f: WARNING: silence_len overrun: %d\n",
		 buffer->silence_len));
      }
    }      

    if((buffer->reopen >= 0) && !((buffer->silence <= 0) && (buffer->silence_len > 0))) {
      buffer->reopen -= length;
      if(buffer->reopen <= 0) {
	if(buffer->reopen < 0)
	  DEBUG(("[crossfade] buffer_thread_f: WARNING: reopen overrun: %d\n",
		 buffer->reopen));

	DEBUG(("[crossfade] buffer_thread_f: closing/reopening device\n"));
	if(buffer->reopen_sync) sync_output();

	if(the_op->close_audio) the_op->close_audio();
	if(!the_op->open_audio(out_format.fmt, out_format.rate, out_format.nch)) {
	  DEBUG(("[crossfade] buffer_thread_f: reopening output plugin failed!\n"));
	  g_free(buffer->data);
	  output_opened = FALSE;
	  g_static_mutex_unlock(&buffer_mutex);
	  g_thread_exit(0);
	}

	output_flush_time = 0;
	output_written    = 0;
	output_streampos  = 0;

	/* We need to take the leading gap killer into account here:
	 * It will fix streampos only after gapkilling has finished.
	 * So, if gapkilling is still in progress at this point, we
	 * have to fix it ourselves. */
	output_offset = buffer->used;
	if((buffer->gap_len > 0) && (buffer->gap > 0))
	  output_offset += buffer->gap_len - buffer->gap;
	output_offset = B2MS(output_offset) - xfade_written_time();

	/* make sure reopen is not 0 */
	buffer->reopen = -1;
      }
    }

    if(buffer->pause >= 0) {
      buffer->pause -= length;
      if(buffer->pause <= 0) {
	if(buffer->pause < 0)
	  DEBUG(("[crossfade] buffer_thread_f: WARNING: pause overrun: %d\n",
		 buffer->pause));

	DEBUG(("[crossfade] buffer_thread_f: pausing output\n"));

	paused = TRUE;
	sync_output();

	if(!paused)
	  DEBUG(("[crossfade] buffer_thread_f: unpause during sync\n"))
	else
	  the_op->pause(1);

	buffer->pause = -1;
      }
    }
  }
  
  /* ----------------------------------------------------------------------- */

  /* cleanup: close output */
  if(output_opened) {
    xfade_stop_monitor();

    if(!finishing) {
      if(the_op->close_audio) the_op->close_audio();
      g_free(buffer->data);
      output_opened = FALSE;
    }
  }
  else
    DEBUG(("[crossfade] buffer_thread_f: output already closed!\n"));

  /* acknowledge 'finishing' (see fini()) */
  finishing = FALSE;

  /* ----------------------------------------------------------------------- */

  /* unlock buffer */
  g_static_mutex_unlock(&buffer_mutex);

  /* done */
  DEBUG(("[crossfade] buffer_thread_f: thread finished\n"));
  g_thread_exit(0);

  return NULL;  /* avoid compiler warning */
}

void
xfade_close_audio()
{
  DEBUG(("[crossfade] close:\n"));

  /* lock buffer */
  g_static_mutex_lock(&buffer_mutex);

  /* sanity... the vorbis plugin likes to call close_audio() twice */
  if(!opened) {
    DEBUG(("[crossfade] close: WARNING: not opened!\n"));
    g_static_mutex_unlock(&buffer_mutex);
    return;
  }

  /* HACK: FIXME: */
  if(input_stopped_for_restart && input_stopped_for_restart())
     DEBUG(("[crossfade] close: playback will restart soon\n"));

  if(playing) {
    /* immediatelly close output when paused */
    if(paused) {
      buffer->pause = -1;
      paused = FALSE;
      if(config->output_keep_opened) {
	buffer->used = 0;
	the_op->flush(0);
	the_op->pause(0);
      }
      else
	stopped = TRUE;
    }

    /* HACK: If playlist_get_info_going is not true here,
     *       XMMS is about to exit. In this case, we stop
     *       the buffer thread before returning from this
     *       function. Otherwise, SEGFAULT may occur when
     *       XMMS tries to cleanup an output plugin which
     *       we are still using.
     *
     * NOTE: This hack has become obsolete as of 0.3.5.
     *       See output_list_hack().
     */
#if 0
    if((xmms_playlist_get_info_going && !*xmms_playlist_get_info_going) ||
       (xmms_is_quitting             &&  *xmms_is_quitting)) {
      DEBUG(("[crossfade] close: stop (about to quit)\n"))
  
#if 1
      /* wait for buffer thread to clean up and terminate */
      stopped = TRUE;
      while(output_opened) {
	g_static_mutex_unlock(&buffer_mutex);
	xmms_usleep(10000);
	g_static_mutex_lock(&buffer_mutex);
      }
#endif
    }
    else
#endif
      DEBUG(("[crossfade] close: stop\n"));

    fade_config = &config->fc[FADE_CONFIG_MANUAL];
  }
  else {
    DEBUG(("[crossfade] close: songchange/eop\n"));

    /* kill trailing gap (does not use buffer->gap_*) */
    if(output_opened && xfade_cfg_gap_trail_enable(config)) {
      gint gap_len   = MS2B(xfade_cfg_gap_trail_len(config)) & -4;
      gint gap_level = xfade_cfg_gap_trail_level(config);
      gint length    = MIN(gap_len, buffer->used);

      DEBUG(("[crossfade] close: len=%d level=%d length=%d\n", gap_len, gap_level, length));
      
      buffer->gap_killed = 0;
      while(length > 0) {
	gint wr_xedni = (buffer->rd_index + buffer->used-1) % buffer->size + 1;
	gint     blen = MIN(length, wr_xedni);
	gint16     *p = buffer->data + wr_xedni;
	gint    index = 0;
	
	while(index < blen) {
	  gint16 right = *--p, left = *--p;
	  if(ABS(left) >= gap_level) break;
	  if(ABS(right) >= gap_level) break;
	  index += 4;
	}
	
	buffer->used       -= index;
	buffer->gap_killed += index;
	
	if(index < blen) break;
	length -= blen;
      }
      
      DEBUG(("[crossfade] close: trailing gap size: %d/%d ms\n",
	     B2MS(buffer->gap_killed), B2MS(gap_len)));
    }

    /* skip to previous zero crossing */
    if(output_opened && config->gap_crossing) {
      int crossing;

      buffer->gap_skipped = 0;
      for(crossing = 0; crossing<4; crossing++) {
	while(buffer->used > 0) {
	  gint wr_xedni = (buffer->rd_index + buffer->used-1) % buffer->size + 1;
	  gint     blen = MIN(buffer->used, wr_xedni);
	  gint16     *p = buffer->data + wr_xedni;
	  gint    index = 0;

	  while(index < blen) {
	    gint16 left = (--p, *--p);
	    if((crossing & 1) ^ (left > 0)) break;
	    index += 4;
	  }

	  buffer->used        -= index;
	  buffer->gap_skipped += index;

	  if(index < blen) break;
	}
      }
      DEBUG(("[crossfade] close: skipped %d bytes to previous zero crossing\n", buffer->gap_skipped));

      /* update gap_killed (for undoing gap_killer in case of EOP) */
      buffer->gap_killed += buffer->gap_skipped;
    }

    fade_config = &config->fc[FADE_CONFIG_XFADE];
  }

  /* XMMS has left the building */
  opened = FALSE;
  
  /* update last_close */
  gettimeofday(&last_close, NULL);
  input_playing = FALSE;
  
  /* unlock buffer */
  g_static_mutex_unlock(&buffer_mutex);
}

void
xfade_flush(gint time)
{
  DEBUG(("[crossfade] flush: time=%d\n", time));

  /* lock buffer */
  g_static_mutex_lock(&buffer_mutex);

  /* update streampos with new stream position (input format size) */
  streampos = ((gint64)time * in_format.bps / 1000) & -4;

  /* flush output device / apply seek crossfade */
  if(config->fc[FADE_CONFIG_SEEK].type == FADE_TYPE_FLUSH) {
    /* flush output plugin */
    the_op->flush(time);
    output_flush_time = time;
    output_streampos  = MS2B(time);

    /* flush buffer, disable leading gap killing */
    buffer_reset(buffer, config);
  }
  else if(paused) {
    fade_config_t fc;

    /* clear buffer */
    buffer->used = 0;

    /* apply only the fade_in part of FADE_CONFIG_PAUSE */
    memcpy(&fc, &config->fc[FADE_CONFIG_PAUSE], sizeof(fc));
    fc.out_len_ms = 0;
    fc.ofs_custom_ms = 0;
    xfade_apply_fade_config(&fc);
  }
  else
    xfade_apply_fade_config(&config->fc[FADE_CONFIG_SEEK]);

  /* restart realtime throttling (should find another name for that var) */
  output_written = 0;

  /* make sure that the gapkiller is disabled */
  buffer->gap = 0;

  /* update output offset */
  output_offset = the_op->written_time() - time
    + B2MS(buffer->used) + B2MS(buffer->silence_len);

  /* unlock buffer */
  g_static_mutex_unlock(&buffer_mutex);

#ifdef DEBUG_HARDCORE
  DEBUG(("[crossfade] flush: time=%d: done.\n", time));
#endif
}

void
xfade_pause(short p)
{
  /* lock buffer */
  g_static_mutex_lock(&buffer_mutex);

  if(p) {
    fade_config_t *fc = &config->fc[FADE_CONFIG_PAUSE];
    if(fc->type == FADE_TYPE_PAUSE_ADV) {
      int fade, length, n;
      int index = buffer->rd_index;
      int out_len     = MS2B(xfade_cfg_fadeout_len(fc)) & -4;
      int in_len      = MS2B(xfade_cfg_fadein_len(fc)) & -4;
      int silence_len = MS2B(xfade_cfg_offset(fc)) & -4;

      /* limit fadeout/fadein len to available data in buffer */
      if((out_len + in_len) > buffer->used) {
	out_len = (buffer->used / 2) & -4;
	in_len  = out_len;
      }

      DEBUG(("[crossfade] pause: paused=1 out=%d in=%d silence=%d\n",
	     B2MS(out_len), B2MS(in_len), B2MS(silence_len)));
      
      /* fade out (modifies buffer directly) */
      fade = 0;
      length = out_len;
      while(length > 0) {
	gint16 *p = buffer->data + index;
	gint blen = buffer->size - index;
	if(blen > length) blen = length;
	
	for(n = blen/4; n > 0; n--) {
	  gfloat factor = 1.0f - ((gfloat)fade / out_len);
	  *p = (gfloat)*p * factor; p++;
	  *p = (gfloat)*p * factor; p++;
	  fade += 4;
	}
	
	index = (index + blen) % buffer->size;
	length -= blen;
      }
      
      /* fade in (modifies buffer directly) */
      fade = 0;
      length = in_len;
      while(length > 0) {
	gint16 *p = buffer->data + index;
	gint blen = buffer->size - index;
	if(blen > length) blen = length;
	
	for(n = blen/4; n > 0; n--) {
	  gfloat factor = (gfloat)fade / in_len;
	  *p = (gfloat)*p * factor; p++;
	  *p = (gfloat)*p * factor; p++;
	  fade += 4;
	}
	
	index = (index + blen) % buffer->size;
	length -= blen;
      }

      /* start silence and pause countdowns */
      buffer->silence     = out_len;
      buffer->silence_len = silence_len;
      buffer->pause       = out_len + silence_len;
      paused = FALSE;  /* (!) will be set to TRUE in buffer_thread_f */
    }
    else {
      the_op->pause(1);
      paused = TRUE;
      DEBUG(("[crossfade] pause: paused=1\n"));
    }
  }
  else {
    the_op->pause(0);
    buffer->pause = -1;
    paused = FALSE;
    DEBUG(("[crossfade] pause: paused=0\n"));
  }

  /* unlock buffer */
  g_static_mutex_unlock(&buffer_mutex);
}

gint
xfade_buffer_free()
{
  gint size, free;

#ifdef DEBUG_HARDCORE
  DEBUG(("[crossfade] buffer_free:\n"));
#endif

  /* sanity check */
  if(!output_opened) {
    DEBUG(("[crossfade] buffer_free: WARNING: output closed!\n"));
    return buffer->sync_size;
  }

  /* lock buffer */
  g_static_mutex_lock(&buffer_mutex);

  size = buffer->size;

  /* When running in realtime mode, we need to take special care here:
   * While XMMS is writing data to the output plugin, it will not yield
   * ANY processing time to the buffer thread. It will only stop when
   * xfade_buffer_free() no longer reports free buffer space. */
  if(realtime) {
    gint64 wanted = output_written + buffer->preload_size;

    /* Fix for XMMS misbehaviour (possibly a bug): If the free space as
     * returned by xfade_buffer_free() is below a certain minimum block size
     * (tests showed 2304 bytes), XMMS will not send more data until there
     * is enough room for one of those blocks.
     *
     * This breaks preloading in realtime mode. To make sure that the pre-
     * load buffer gets filled we request additional sync_size bytes. */
    wanted += buffer->sync_size;

    if(wanted <= size) size = wanted;
  }

  free = size - buffer->used;
  if(free < 0) free = 0;
  
  /* unlock buffer */
  g_static_mutex_unlock(&buffer_mutex);

  /* Convert to input format size. For input rates > output rate this will
   * return less free space than actually is available, but we don't care. */
  free /= (out_format.rate / (in_format.rate+1)) + 1;
  if(in_format.is_8bit)  free /= 2;
  if(in_format.nch == 1) free /= 2;

#ifdef DEBUG_HARDCORE
  DEBUG(("[crossfade] buffer_free: %d\n", free));
#endif
  return free;
}

gint 
xfade_buffer_playing()
{
  /*  always return FALSE here (if not in pause) so XMMS immediatelly
   *  starts playback of the next song */

  /*
   *  NOTE: this causes trouble when playing HTTP audio streams.
   *
   *  mpg123.lib will start prebuffering (and thus stalling output) when both
   *  1) it's internal buffer is emptied (does happen all the time)
   *  2) the output plugin's buffer_playing() (this function) returns FALSE
   */

  if(paused)
    playing = TRUE;
  else
    playing = (is_http && (buffer->used > 0) && the_op->buffer_playing())
      || ((buffer->reopen >= 0) || (buffer->silence > 0) || (buffer->silence_len > 0));

#ifdef DEBUG_HARDCORE
  DEBUG(("[crossfade] buffer_playing: %d\n", playing));
#endif
  return playing;
}

gint
xfade_written_time()
{
  if(!output_opened) return 0;
  return (gint)(streampos * 1000 / in_format.bps);
}

gint
xfade_output_time()
{
  gint time;

#ifdef DEBUG_HARDCORE
  DEBUG(("[crossfade] output_time:\n"));
#endif

  /* sanity check (note: this one _does_ happen all the time) */
  if(!output_opened) return 0;

  /* lock buffer */
  g_static_mutex_lock(&buffer_mutex);

  time = the_op->output_time() - output_offset;
  if(time < 0) time = 0;

  /* unlock buffer */
  g_static_mutex_unlock(&buffer_mutex);

#ifdef DEBUG_HARDCORE
  DEBUG(("[crossfade] output_time: time=%d\n", time));
#endif
  return time;
}