Mercurial > audlegacy
view sqlite/sqliteInt.h @ 1448:3b1c464cbbb0 trunk
[svn] Seems safer to me to free this way, assuming I'm not misreading.
Hey. At least it doesn't crash.
| author | nemo |
|---|---|
| date | Fri, 28 Jul 2006 07:21:20 -0700 |
| parents | b6b61becdf4e |
| children | c3b203d258a7 |
line wrap: on
line source
/* ** 2001 September 15 ** ** The author disclaims copyright to this source code. In place of ** a legal notice, here is a blessing: ** ** May you do good and not evil. ** May you find forgiveness for yourself and forgive others. ** May you share freely, never taking more than you give. ** ************************************************************************* ** Internal interface definitions for SQLite. ** ** @(#) $Id: sqliteInt.h,v 1.494 2006/05/25 12:17:31 drh Exp $ */ #ifndef _SQLITEINT_H_ #define _SQLITEINT_H_ #include "sqlite.h" /* ** Extra interface definitions for those who need them */ #ifdef SQLITE_EXTRA # include "sqliteExtra.h" #endif /* ** Many people are failing to set -DNDEBUG=1 when compiling SQLite. ** Setting NDEBUG makes the code smaller and run faster. So the following ** lines are added to automatically set NDEBUG unless the -DSQLITE_DEBUG=1 ** option is set. Thus NDEBUG becomes an opt-in rather than an opt-out ** feature. */ #if !defined(NDEBUG) && !defined(SQLITE_DEBUG) # define NDEBUG 1 #endif /* ** These #defines should enable >2GB file support on Posix if the ** underlying operating system supports it. If the OS lacks ** large file support, or if the OS is windows, these should be no-ops. ** ** Large file support can be disabled using the -DSQLITE_DISABLE_LFS switch ** on the compiler command line. This is necessary if you are compiling ** on a recent machine (ex: RedHat 7.2) but you want your code to work ** on an older machine (ex: RedHat 6.0). If you compile on RedHat 7.2 ** without this option, LFS is enable. But LFS does not exist in the kernel ** in RedHat 6.0, so the code won't work. Hence, for maximum binary ** portability you should omit LFS. ** ** Similar is true for MacOS. LFS is only supported on MacOS 9 and later. */ #ifndef SQLITE_DISABLE_LFS # define _LARGE_FILE 1 # ifndef _FILE_OFFSET_BITS # define _FILE_OFFSET_BITS 64 # endif # define _LARGEFILE_SOURCE 1 #endif #include "sqlite3.h" #include "hash.h" #include "parse.h" #include <stdio.h> #include <stdlib.h> #include <string.h> #include <assert.h> #include <stddef.h> /* ** If compiling for a processor that lacks floating point support, ** substitute integer for floating-point */ #ifdef SQLITE_OMIT_FLOATING_POINT # define double sqlite_int64 # define LONGDOUBLE_TYPE sqlite_int64 # ifndef SQLITE_BIG_DBL # define SQLITE_BIG_DBL (0x7fffffffffffffff) # endif # define SQLITE_OMIT_DATETIME_FUNCS 1 # define SQLITE_OMIT_TRACE 1 #endif #ifndef SQLITE_BIG_DBL # define SQLITE_BIG_DBL (1e99) #endif /* ** The maximum number of in-memory pages to use for the main database ** table and for temporary tables. Internally, the MAX_PAGES and ** TEMP_PAGES macros are used. To override the default values at ** compilation time, the SQLITE_DEFAULT_CACHE_SIZE and ** SQLITE_DEFAULT_TEMP_CACHE_SIZE macros should be set. */ #ifdef SQLITE_DEFAULT_CACHE_SIZE # define MAX_PAGES SQLITE_DEFAULT_CACHE_SIZE #else # define MAX_PAGES 2000 #endif #ifdef SQLITE_DEFAULT_TEMP_CACHE_SIZE # define TEMP_PAGES SQLITE_DEFAULT_TEMP_CACHE_SIZE #else # define TEMP_PAGES 500 #endif /* ** OMIT_TEMPDB is set to 1 if SQLITE_OMIT_TEMPDB is defined, or 0 ** afterward. Having this macro allows us to cause the C compiler ** to omit code used by TEMP tables without messy #ifndef statements. */ #ifdef SQLITE_OMIT_TEMPDB #define OMIT_TEMPDB 1 #else #define OMIT_TEMPDB 0 #endif /* ** If the following macro is set to 1, then NULL values are considered ** distinct when determining whether or not two entries are the same ** in a UNIQUE index. This is the way PostgreSQL, Oracle, DB2, MySQL, ** OCELOT, and Firebird all work. The SQL92 spec explicitly says this ** is the way things are suppose to work. ** ** If the following macro is set to 0, the NULLs are indistinct for ** a UNIQUE index. In this mode, you can only have a single NULL entry ** for a column declared UNIQUE. This is the way Informix and SQL Server ** work. */ #define NULL_DISTINCT_FOR_UNIQUE 1 /* ** The maximum number of attached databases. This must be at least 2 ** in order to support the main database file (0) and the file used to ** hold temporary tables (1). And it must be less than 32 because ** we use a bitmask of databases with a u32 in places (for example ** the Parse.cookieMask field). */ #define MAX_ATTACHED 10 /* ** The maximum value of a ?nnn wildcard that the parser will accept. */ #define SQLITE_MAX_VARIABLE_NUMBER 999 /* ** The "file format" number is an integer that is incremented whenever ** the VDBE-level file format changes. The following macros define the ** the default file format for new databases and the maximum file format ** that the library can read. */ #define SQLITE_MAX_FILE_FORMAT 4 #ifndef SQLITE_DEFAULT_FILE_FORMAT # define SQLITE_DEFAULT_FILE_FORMAT 4 #endif /* ** Provide a default value for TEMP_STORE in case it is not specified ** on the command-line */ #ifndef TEMP_STORE # define TEMP_STORE 1 #endif /* ** GCC does not define the offsetof() macro so we'll have to do it ** ourselves. */ #ifndef offsetof #define offsetof(STRUCTURE,FIELD) ((int)((char*)&((STRUCTURE*)0)->FIELD)) #endif /* ** Check to see if this machine uses EBCDIC. (Yes, believe it or ** not, there are still machines out there that use EBCDIC.) */ #if 'A' == '\301' # define SQLITE_EBCDIC 1 #else # define SQLITE_ASCII 1 #endif /* ** Integers of known sizes. These typedefs might change for architectures ** where the sizes very. Preprocessor macros are available so that the ** types can be conveniently redefined at compile-type. Like this: ** ** cc '-DUINTPTR_TYPE=long long int' ... */ #ifndef UINT32_TYPE # define UINT32_TYPE unsigned int #endif #ifndef UINT16_TYPE # define UINT16_TYPE unsigned short int #endif #ifndef INT16_TYPE # define INT16_TYPE short int #endif #ifndef UINT8_TYPE # define UINT8_TYPE unsigned char #endif #ifndef INT8_TYPE # define INT8_TYPE signed char #endif #ifndef LONGDOUBLE_TYPE # define LONGDOUBLE_TYPE long double #endif typedef sqlite_int64 i64; /* 8-byte signed integer */ typedef sqlite_uint64 u64; /* 8-byte unsigned integer */ typedef UINT32_TYPE u32; /* 4-byte unsigned integer */ typedef UINT16_TYPE u16; /* 2-byte unsigned integer */ typedef INT16_TYPE i16; /* 2-byte signed integer */ typedef UINT8_TYPE u8; /* 1-byte unsigned integer */ typedef UINT8_TYPE i8; /* 1-byte signed integer */ /* ** Macros to determine whether the machine is big or little endian, ** evaluated at runtime. */ extern const int sqlite3one; #define SQLITE_BIGENDIAN (*(char *)(&sqlite3one)==0) #define SQLITE_LITTLEENDIAN (*(char *)(&sqlite3one)==1) /* ** An instance of the following structure is used to store the busy-handler ** callback for a given sqlite handle. ** ** The sqlite.busyHandler member of the sqlite struct contains the busy ** callback for the database handle. Each pager opened via the sqlite ** handle is passed a pointer to sqlite.busyHandler. The busy-handler ** callback is currently invoked only from within pager.c. */ typedef struct BusyHandler BusyHandler; struct BusyHandler { int (*xFunc)(void *,int); /* The busy callback */ void *pArg; /* First arg to busy callback */ int nBusy; /* Incremented with each busy call */ }; /* ** Defer sourcing vdbe.h and btree.h until after the "u8" and ** "BusyHandler typedefs. */ #include "vdbe.h" #include "btree.h" #include "pager.h" #ifdef SQLITE_MEMDEBUG /* ** The following global variables are used for testing and debugging ** only. They only work if SQLITE_MEMDEBUG is defined. */ extern int sqlite3_nMalloc; /* Number of sqliteMalloc() calls */ extern int sqlite3_nFree; /* Number of sqliteFree() calls */ extern int sqlite3_iMallocFail; /* Fail sqliteMalloc() after this many calls */ extern int sqlite3_iMallocReset; /* Set iMallocFail to this when it reaches 0 */ extern void *sqlite3_pFirst; /* Pointer to linked list of allocations */ extern int sqlite3_nMaxAlloc; /* High water mark of ThreadData.nAlloc */ extern int sqlite3_mallocDisallowed; /* assert() in sqlite3Malloc() if set */ extern int sqlite3_isFail; /* True if all malloc calls should fail */ extern const char *sqlite3_zFile; /* Filename to associate debug info with */ extern int sqlite3_iLine; /* Line number for debug info */ #define ENTER_MALLOC (sqlite3_zFile = __FILE__, sqlite3_iLine = __LINE__) #define sqliteMalloc(x) (ENTER_MALLOC, sqlite3Malloc(x,1)) #define sqliteMallocRaw(x) (ENTER_MALLOC, sqlite3MallocRaw(x,1)) #define sqliteRealloc(x,y) (ENTER_MALLOC, sqlite3Realloc(x,y)) #define sqliteStrDup(x) (ENTER_MALLOC, sqlite3StrDup(x)) #define sqliteStrNDup(x,y) (ENTER_MALLOC, sqlite3StrNDup(x,y)) #define sqliteReallocOrFree(x,y) (ENTER_MALLOC, sqlite3ReallocOrFree(x,y)) #else #define ENTER_MALLOC 0 #define sqliteMalloc(x) sqlite3Malloc(x,1) #define sqliteMallocRaw(x) sqlite3MallocRaw(x,1) #define sqliteRealloc(x,y) sqlite3Realloc(x,y) #define sqliteStrDup(x) sqlite3StrDup(x) #define sqliteStrNDup(x,y) sqlite3StrNDup(x,y) #define sqliteReallocOrFree(x,y) sqlite3ReallocOrFree(x,y) #endif #define sqliteFree(x) sqlite3FreeX(x) #define sqliteAllocSize(x) sqlite3AllocSize(x) /* ** An instance of this structure might be allocated to store information ** specific to a single thread. */ struct ThreadData { int dummy; /* So that this structure is never empty */ #ifdef SQLITE_ENABLE_MEMORY_MANAGEMENT int nSoftHeapLimit; /* Suggested max mem allocation. No limit if <0 */ int nAlloc; /* Number of bytes currently allocated */ Pager *pPager; /* Linked list of all pagers in this thread */ #endif #ifndef SQLITE_OMIT_SHARED_CACHE u8 useSharedData; /* True if shared pagers and schemas are enabled */ BtShared *pBtree; /* Linked list of all currently open BTrees */ #endif }; /* ** Name of the master database table. The master database table ** is a special table that holds the names and attributes of all ** user tables and indices. */ #define MASTER_NAME "sqlite_master" #define TEMP_MASTER_NAME "sqlite_temp_master" /* ** The root-page of the master database table. */ #define MASTER_ROOT 1 /* ** The name of the schema table. */ #define SCHEMA_TABLE(x) ((!OMIT_TEMPDB)&&(x==1)?TEMP_MASTER_NAME:MASTER_NAME) /* ** A convenience macro that returns the number of elements in ** an array. */ #define ArraySize(X) (sizeof(X)/sizeof(X[0])) /* ** Forward references to structures */ typedef struct AggInfo AggInfo; typedef struct AuthContext AuthContext; typedef struct CollSeq CollSeq; typedef struct Column Column; typedef struct Db Db; typedef struct Schema Schema; typedef struct Expr Expr; typedef struct ExprList ExprList; typedef struct FKey FKey; typedef struct FuncDef FuncDef; typedef struct IdList IdList; typedef struct Index Index; typedef struct KeyClass KeyClass; typedef struct KeyInfo KeyInfo; typedef struct NameContext NameContext; typedef struct Parse Parse; typedef struct Select Select; typedef struct SrcList SrcList; typedef struct ThreadData ThreadData; typedef struct Table Table; typedef struct TableLock TableLock; typedef struct Token Token; typedef struct TriggerStack TriggerStack; typedef struct TriggerStep TriggerStep; typedef struct Trigger Trigger; typedef struct WhereInfo WhereInfo; typedef struct WhereLevel WhereLevel; /* ** Each database file to be accessed by the system is an instance ** of the following structure. There are normally two of these structures ** in the sqlite.aDb[] array. aDb[0] is the main database file and ** aDb[1] is the database file used to hold temporary tables. Additional ** databases may be attached. */ struct Db { char *zName; /* Name of this database */ Btree *pBt; /* The B*Tree structure for this database file */ u8 inTrans; /* 0: not writable. 1: Transaction. 2: Checkpoint */ u8 safety_level; /* How aggressive at synching data to disk */ void *pAux; /* Auxiliary data. Usually NULL */ void (*xFreeAux)(void*); /* Routine to free pAux */ Schema *pSchema; /* Pointer to database schema (possibly shared) */ }; /* ** An instance of the following structure stores a database schema. */ struct Schema { int schema_cookie; /* Database schema version number for this file */ Hash tblHash; /* All tables indexed by name */ Hash idxHash; /* All (named) indices indexed by name */ Hash trigHash; /* All triggers indexed by name */ Hash aFKey; /* Foreign keys indexed by to-table */ Table *pSeqTab; /* The sqlite_sequence table used by AUTOINCREMENT */ u8 file_format; /* Schema format version for this file */ u8 enc; /* Text encoding used by this database */ u16 flags; /* Flags associated with this schema */ int cache_size; /* Number of pages to use in the cache */ }; /* ** These macros can be used to test, set, or clear bits in the ** Db.flags field. */ #define DbHasProperty(D,I,P) (((D)->aDb[I].pSchema->flags&(P))==(P)) #define DbHasAnyProperty(D,I,P) (((D)->aDb[I].pSchema->flags&(P))!=0) #define DbSetProperty(D,I,P) (D)->aDb[I].pSchema->flags|=(P) #define DbClearProperty(D,I,P) (D)->aDb[I].pSchema->flags&=~(P) /* ** Allowed values for the DB.flags field. ** ** The DB_SchemaLoaded flag is set after the database schema has been ** read into internal hash tables. ** ** DB_UnresetViews means that one or more views have column names that ** have been filled out. If the schema changes, these column names might ** changes and so the view will need to be reset. */ #define DB_SchemaLoaded 0x0001 /* The schema has been loaded */ #define DB_UnresetViews 0x0002 /* Some views have defined column names */ #define DB_Empty 0x0004 /* The file is empty (length 0 bytes) */ #define SQLITE_UTF16NATIVE (SQLITE_BIGENDIAN?SQLITE_UTF16BE:SQLITE_UTF16LE) /* ** Each database is an instance of the following structure. ** ** The sqlite.lastRowid records the last insert rowid generated by an ** insert statement. Inserts on views do not affect its value. Each ** trigger has its own context, so that lastRowid can be updated inside ** triggers as usual. The previous value will be restored once the trigger ** exits. Upon entering a before or instead of trigger, lastRowid is no ** longer (since after version 2.8.12) reset to -1. ** ** The sqlite.nChange does not count changes within triggers and keeps no ** context. It is reset at start of sqlite3_exec. ** The sqlite.lsChange represents the number of changes made by the last ** insert, update, or delete statement. It remains constant throughout the ** length of a statement and is then updated by OP_SetCounts. It keeps a ** context stack just like lastRowid so that the count of changes ** within a trigger is not seen outside the trigger. Changes to views do not ** affect the value of lsChange. ** The sqlite.csChange keeps track of the number of current changes (since ** the last statement) and is used to update sqlite_lsChange. ** ** The member variables sqlite.errCode, sqlite.zErrMsg and sqlite.zErrMsg16 ** store the most recent error code and, if applicable, string. The ** internal function sqlite3Error() is used to set these variables ** consistently. */ struct sqlite3 { int nDb; /* Number of backends currently in use */ Db *aDb; /* All backends */ int flags; /* Miscellanous flags. See below */ int errCode; /* Most recent error code (SQLITE_*) */ u8 autoCommit; /* The auto-commit flag. */ u8 temp_store; /* 1: file 2: memory 0: default */ int nTable; /* Number of tables in the database */ CollSeq *pDfltColl; /* The default collating sequence (BINARY) */ i64 lastRowid; /* ROWID of most recent insert (see above) */ i64 priorNewRowid; /* Last randomly generated ROWID */ int magic; /* Magic number for detect library misuse */ int nChange; /* Value returned by sqlite3_changes() */ int nTotalChange; /* Value returned by sqlite3_total_changes() */ struct sqlite3InitInfo { /* Information used during initialization */ int iDb; /* When back is being initialized */ int newTnum; /* Rootpage of table being initialized */ u8 busy; /* TRUE if currently initializing */ } init; struct Vdbe *pVdbe; /* List of active virtual machines */ int activeVdbeCnt; /* Number of vdbes currently executing */ void (*xTrace)(void*,const char*); /* Trace function */ void *pTraceArg; /* Argument to the trace function */ void (*xProfile)(void*,const char*,u64); /* Profiling function */ void *pProfileArg; /* Argument to profile function */ void *pCommitArg; /* Argument to xCommitCallback() */ int (*xCommitCallback)(void*); /* Invoked at every commit. */ void *pRollbackArg; /* Argument to xRollbackCallback() */ void (*xRollbackCallback)(void*); /* Invoked at every commit. */ void *pUpdateArg; void (*xUpdateCallback)(void*,int, const char*,const char*,sqlite_int64); void(*xCollNeeded)(void*,sqlite3*,int eTextRep,const char*); void(*xCollNeeded16)(void*,sqlite3*,int eTextRep,const void*); void *pCollNeededArg; sqlite3_value *pErr; /* Most recent error message */ char *zErrMsg; /* Most recent error message (UTF-8 encoded) */ char *zErrMsg16; /* Most recent error message (UTF-16 encoded) */ #ifndef SQLITE_OMIT_AUTHORIZATION int (*xAuth)(void*,int,const char*,const char*,const char*,const char*); /* Access authorization function */ void *pAuthArg; /* 1st argument to the access auth function */ #endif #ifndef SQLITE_OMIT_PROGRESS_CALLBACK int (*xProgress)(void *); /* The progress callback */ void *pProgressArg; /* Argument to the progress callback */ int nProgressOps; /* Number of opcodes for progress callback */ #endif #ifndef SQLITE_OMIT_GLOBALRECOVER sqlite3 *pNext; /* Linked list of open db handles. */ #endif Hash aFunc; /* All functions that can be in SQL exprs */ Hash aCollSeq; /* All collating sequences */ BusyHandler busyHandler; /* Busy callback */ int busyTimeout; /* Busy handler timeout, in msec */ Db aDbStatic[2]; /* Static space for the 2 default backends */ #ifdef SQLITE_SSE sqlite3_stmt *pFetch; /* Used by SSE to fetch stored statements */ #endif }; /* ** A macro to discover the encoding of a database. */ #define ENC(db) ((db)->aDb[0].pSchema->enc) /* ** Possible values for the sqlite.flags and or Db.flags fields. ** ** On sqlite.flags, the SQLITE_InTrans value means that we have ** executed a BEGIN. On Db.flags, SQLITE_InTrans means a statement ** transaction is active on that particular database file. */ #define SQLITE_VdbeTrace 0x00000001 /* True to trace VDBE execution */ #define SQLITE_Interrupt 0x00000004 /* Cancel current operation */ #define SQLITE_InTrans 0x00000008 /* True if in a transaction */ #define SQLITE_InternChanges 0x00000010 /* Uncommitted Hash table changes */ #define SQLITE_FullColNames 0x00000020 /* Show full column names on SELECT */ #define SQLITE_ShortColNames 0x00000040 /* Show short columns names */ #define SQLITE_CountRows 0x00000080 /* Count rows changed by INSERT, */ /* DELETE, or UPDATE and return */ /* the count using a callback. */ #define SQLITE_NullCallback 0x00000100 /* Invoke the callback once if the */ /* result set is empty */ #define SQLITE_SqlTrace 0x00000200 /* Debug print SQL as it executes */ #define SQLITE_VdbeListing 0x00000400 /* Debug listings of VDBE programs */ #define SQLITE_WriteSchema 0x00000800 /* OK to update SQLITE_MASTER */ #define SQLITE_NoReadlock 0x00001000 /* Readlocks are omitted when ** accessing read-only databases */ #define SQLITE_IgnoreChecks 0x00002000 /* Do not enforce check constraints */ #define SQLITE_ReadUncommitted 0x00004000 /* For shared-cache mode */ #define SQLITE_LegacyFileFmt 0x00008000 /* Create new databases in format 1 */ #define SQLITE_FullFSync 0x00010000 /* Use full fsync on the backend */ /* ** Possible values for the sqlite.magic field. ** The numbers are obtained at random and have no special meaning, other ** than being distinct from one another. */ #define SQLITE_MAGIC_OPEN 0xa029a697 /* Database is open */ #define SQLITE_MAGIC_CLOSED 0x9f3c2d33 /* Database is closed */ #define SQLITE_MAGIC_BUSY 0xf03b7906 /* Database currently in use */ #define SQLITE_MAGIC_ERROR 0xb5357930 /* An SQLITE_MISUSE error occurred */ /* ** Each SQL function is defined by an instance of the following ** structure. A pointer to this structure is stored in the sqlite.aFunc ** hash table. When multiple functions have the same name, the hash table ** points to a linked list of these structures. */ struct FuncDef { i16 nArg; /* Number of arguments. -1 means unlimited */ u8 iPrefEnc; /* Preferred text encoding (SQLITE_UTF8, 16LE, 16BE) */ u8 needCollSeq; /* True if sqlite3GetFuncCollSeq() might be called */ u8 flags; /* Some combination of SQLITE_FUNC_* */ void *pUserData; /* User data parameter */ FuncDef *pNext; /* Next function with same name */ void (*xFunc)(sqlite3_context*,int,sqlite3_value**); /* Regular function */ void (*xStep)(sqlite3_context*,int,sqlite3_value**); /* Aggregate step */ void (*xFinalize)(sqlite3_context*); /* Aggregate finializer */ char zName[1]; /* SQL name of the function. MUST BE LAST */ }; /* ** Possible values for FuncDef.flags */ #define SQLITE_FUNC_LIKE 0x01 /* Candidate for the LIKE optimization */ #define SQLITE_FUNC_CASE 0x02 /* Case-sensitive LIKE-type function */ /* ** information about each column of an SQL table is held in an instance ** of this structure. */ struct Column { char *zName; /* Name of this column */ Expr *pDflt; /* Default value of this column */ char *zType; /* Data type for this column */ char *zColl; /* Collating sequence. If NULL, use the default */ u8 notNull; /* True if there is a NOT NULL constraint */ u8 isPrimKey; /* True if this column is part of the PRIMARY KEY */ char affinity; /* One of the SQLITE_AFF_... values */ }; /* ** A "Collating Sequence" is defined by an instance of the following ** structure. Conceptually, a collating sequence consists of a name and ** a comparison routine that defines the order of that sequence. ** ** There may two seperate implementations of the collation function, one ** that processes text in UTF-8 encoding (CollSeq.xCmp) and another that ** processes text encoded in UTF-16 (CollSeq.xCmp16), using the machine ** native byte order. When a collation sequence is invoked, SQLite selects ** the version that will require the least expensive encoding ** translations, if any. ** ** The CollSeq.pUser member variable is an extra parameter that passed in ** as the first argument to the UTF-8 comparison function, xCmp. ** CollSeq.pUser16 is the equivalent for the UTF-16 comparison function, ** xCmp16. ** ** If both CollSeq.xCmp and CollSeq.xCmp16 are NULL, it means that the ** collating sequence is undefined. Indices built on an undefined ** collating sequence may not be read or written. */ struct CollSeq { char *zName; /* Name of the collating sequence, UTF-8 encoded */ u8 enc; /* Text encoding handled by xCmp() */ u8 type; /* One of the SQLITE_COLL_... values below */ void *pUser; /* First argument to xCmp() */ int (*xCmp)(void*,int, const void*, int, const void*); }; /* ** Allowed values of CollSeq flags: */ #define SQLITE_COLL_BINARY 1 /* The default memcmp() collating sequence */ #define SQLITE_COLL_NOCASE 2 /* The built-in NOCASE collating sequence */ #define SQLITE_COLL_REVERSE 3 /* The built-in REVERSE collating sequence */ #define SQLITE_COLL_USER 0 /* Any other user-defined collating sequence */ /* ** A sort order can be either ASC or DESC. */ #define SQLITE_SO_ASC 0 /* Sort in ascending order */ #define SQLITE_SO_DESC 1 /* Sort in ascending order */ /* ** Column affinity types. ** ** These used to have mnemonic name like 'i' for SQLITE_AFF_INTEGER and ** 't' for SQLITE_AFF_TEXT. But we can save a little space and improve ** the speed a little by number the values consecutively. ** ** But rather than start with 0 or 1, we begin with 'a'. That way, ** when multiple affinity types are concatenated into a string and ** used as the P3 operand, they will be more readable. ** ** Note also that the numeric types are grouped together so that testing ** for a numeric type is a single comparison. */ #define SQLITE_AFF_TEXT 'a' #define SQLITE_AFF_NONE 'b' #define SQLITE_AFF_NUMERIC 'c' #define SQLITE_AFF_INTEGER 'd' #define SQLITE_AFF_REAL 'e' #define sqlite3IsNumericAffinity(X) ((X)>=SQLITE_AFF_NUMERIC) /* ** Each SQL table is represented in memory by an instance of the ** following structure. ** ** Table.zName is the name of the table. The case of the original ** CREATE TABLE statement is stored, but case is not significant for ** comparisons. ** ** Table.nCol is the number of columns in this table. Table.aCol is a ** pointer to an array of Column structures, one for each column. ** ** If the table has an INTEGER PRIMARY KEY, then Table.iPKey is the index of ** the column that is that key. Otherwise Table.iPKey is negative. Note ** that the datatype of the PRIMARY KEY must be INTEGER for this field to ** be set. An INTEGER PRIMARY KEY is used as the rowid for each row of ** the table. If a table has no INTEGER PRIMARY KEY, then a random rowid ** is generated for each row of the table. Table.hasPrimKey is true if ** the table has any PRIMARY KEY, INTEGER or otherwise. ** ** Table.tnum is the page number for the root BTree page of the table in the ** database file. If Table.iDb is the index of the database table backend ** in sqlite.aDb[]. 0 is for the main database and 1 is for the file that ** holds temporary tables and indices. If Table.isTransient ** is true, then the table is stored in a file that is automatically deleted ** when the VDBE cursor to the table is closed. In this case Table.tnum ** refers VDBE cursor number that holds the table open, not to the root ** page number. Transient tables are used to hold the results of a ** sub-query that appears instead of a real table name in the FROM clause ** of a SELECT statement. */ struct Table { char *zName; /* Name of the table */ int nCol; /* Number of columns in this table */ Column *aCol; /* Information about each column */ int iPKey; /* If not less then 0, use aCol[iPKey] as the primary key */ Index *pIndex; /* List of SQL indexes on this table. */ int tnum; /* Root BTree node for this table (see note above) */ Select *pSelect; /* NULL for tables. Points to definition if a view. */ u8 readOnly; /* True if this table should not be written by the user */ u8 isTransient; /* True if automatically deleted when VDBE finishes */ u8 hasPrimKey; /* True if there exists a primary key */ u8 keyConf; /* What to do in case of uniqueness conflict on iPKey */ u8 autoInc; /* True if the integer primary key is autoincrement */ int nRef; /* Number of pointers to this Table */ Trigger *pTrigger; /* List of SQL triggers on this table */ FKey *pFKey; /* Linked list of all foreign keys in this table */ char *zColAff; /* String defining the affinity of each column */ #ifndef SQLITE_OMIT_CHECK Expr *pCheck; /* The AND of all CHECK constraints */ #endif #ifndef SQLITE_OMIT_ALTERTABLE int addColOffset; /* Offset in CREATE TABLE statement to add a new column */ #endif Schema *pSchema; }; /* ** Each foreign key constraint is an instance of the following structure. ** ** A foreign key is associated with two tables. The "from" table is ** the table that contains the REFERENCES clause that creates the foreign ** key. The "to" table is the table that is named in the REFERENCES clause. ** Consider this example: ** ** CREATE TABLE ex1( ** a INTEGER PRIMARY KEY, ** b INTEGER CONSTRAINT fk1 REFERENCES ex2(x) ** ); ** ** For foreign key "fk1", the from-table is "ex1" and the to-table is "ex2". ** ** Each REFERENCES clause generates an instance of the following structure ** which is attached to the from-table. The to-table need not exist when ** the from-table is created. The existance of the to-table is not checked ** until an attempt is made to insert data into the from-table. ** ** The sqlite.aFKey hash table stores pointers to this structure ** given the name of a to-table. For each to-table, all foreign keys ** associated with that table are on a linked list using the FKey.pNextTo ** field. */ struct FKey { Table *pFrom; /* The table that constains the REFERENCES clause */ FKey *pNextFrom; /* Next foreign key in pFrom */ char *zTo; /* Name of table that the key points to */ FKey *pNextTo; /* Next foreign key that points to zTo */ int nCol; /* Number of columns in this key */ struct sColMap { /* Mapping of columns in pFrom to columns in zTo */ int iFrom; /* Index of column in pFrom */ char *zCol; /* Name of column in zTo. If 0 use PRIMARY KEY */ } *aCol; /* One entry for each of nCol column s */ u8 isDeferred; /* True if constraint checking is deferred till COMMIT */ u8 updateConf; /* How to resolve conflicts that occur on UPDATE */ u8 deleteConf; /* How to resolve conflicts that occur on DELETE */ u8 insertConf; /* How to resolve conflicts that occur on INSERT */ }; /* ** SQLite supports many different ways to resolve a contraint ** error. ROLLBACK processing means that a constraint violation ** causes the operation in process to fail and for the current transaction ** to be rolled back. ABORT processing means the operation in process ** fails and any prior changes from that one operation are backed out, ** but the transaction is not rolled back. FAIL processing means that ** the operation in progress stops and returns an error code. But prior ** changes due to the same operation are not backed out and no rollback ** occurs. IGNORE means that the particular row that caused the constraint ** error is not inserted or updated. Processing continues and no error ** is returned. REPLACE means that preexisting database rows that caused ** a UNIQUE constraint violation are removed so that the new insert or ** update can proceed. Processing continues and no error is reported. ** ** RESTRICT, SETNULL, and CASCADE actions apply only to foreign keys. ** RESTRICT is the same as ABORT for IMMEDIATE foreign keys and the ** same as ROLLBACK for DEFERRED keys. SETNULL means that the foreign ** key is set to NULL. CASCADE means that a DELETE or UPDATE of the ** referenced table row is propagated into the row that holds the ** foreign key. ** ** The following symbolic values are used to record which type ** of action to take. */ #define OE_None 0 /* There is no constraint to check */ #define OE_Rollback 1 /* Fail the operation and rollback the transaction */ #define OE_Abort 2 /* Back out changes but do no rollback transaction */ #define OE_Fail 3 /* Stop the operation but leave all prior changes */ #define OE_Ignore 4 /* Ignore the error. Do not do the INSERT or UPDATE */ #define OE_Replace 5 /* Delete existing record, then do INSERT or UPDATE */ #define OE_Restrict 6 /* OE_Abort for IMMEDIATE, OE_Rollback for DEFERRED */ #define OE_SetNull 7 /* Set the foreign key value to NULL */ #define OE_SetDflt 8 /* Set the foreign key value to its default */ #define OE_Cascade 9 /* Cascade the changes */ #define OE_Default 99 /* Do whatever the default action is */ /* ** An instance of the following structure is passed as the first ** argument to sqlite3VdbeKeyCompare and is used to control the ** comparison of the two index keys. ** ** If the KeyInfo.incrKey value is true and the comparison would ** otherwise be equal, then return a result as if the second key ** were larger. */ struct KeyInfo { u8 enc; /* Text encoding - one of the TEXT_Utf* values */ u8 incrKey; /* Increase 2nd key by epsilon before comparison */ int nField; /* Number of entries in aColl[] */ u8 *aSortOrder; /* If defined an aSortOrder[i] is true, sort DESC */ CollSeq *aColl[1]; /* Collating sequence for each term of the key */ }; /* ** Each SQL index is represented in memory by an ** instance of the following structure. ** ** The columns of the table that are to be indexed are described ** by the aiColumn[] field of this structure. For example, suppose ** we have the following table and index: ** ** CREATE TABLE Ex1(c1 int, c2 int, c3 text); ** CREATE INDEX Ex2 ON Ex1(c3,c1); ** ** In the Table structure describing Ex1, nCol==3 because there are ** three columns in the table. In the Index structure describing ** Ex2, nColumn==2 since 2 of the 3 columns of Ex1 are indexed. ** The value of aiColumn is {2, 0}. aiColumn[0]==2 because the ** first column to be indexed (c3) has an index of 2 in Ex1.aCol[]. ** The second column to be indexed (c1) has an index of 0 in ** Ex1.aCol[], hence Ex2.aiColumn[1]==0. ** ** The Index.onError field determines whether or not the indexed columns ** must be unique and what to do if they are not. When Index.onError=OE_None, ** it means this is not a unique index. Otherwise it is a unique index ** and the value of Index.onError indicate the which conflict resolution ** algorithm to employ whenever an attempt is made to insert a non-unique ** element. */ struct Index { char *zName; /* Name of this index */ int nColumn; /* Number of columns in the table used by this index */ int *aiColumn; /* Which columns are used by this index. 1st is 0 */ unsigned *aiRowEst; /* Result of ANALYZE: Est. rows selected by each column */ Table *pTable; /* The SQL table being indexed */ int tnum; /* Page containing root of this index in database file */ u8 onError; /* OE_Abort, OE_Ignore, OE_Replace, or OE_None */ u8 autoIndex; /* True if is automatically created (ex: by UNIQUE) */ char *zColAff; /* String defining the affinity of each column */ Index *pNext; /* The next index associated with the same table */ Schema *pSchema; /* Schema containing this index */ u8 *aSortOrder; /* Array of size Index.nColumn. True==DESC, False==ASC */ char **azColl; /* Array of collation sequence names for index */ }; /* ** Each token coming out of the lexer is an instance of ** this structure. Tokens are also used as part of an expression. ** ** Note if Token.z==0 then Token.dyn and Token.n are undefined and ** may contain random values. Do not make any assuptions about Token.dyn ** and Token.n when Token.z==0. */ struct Token { const unsigned char *z; /* Text of the token. Not NULL-terminated! */ unsigned dyn : 1; /* True for malloced memory, false for static */ unsigned n : 31; /* Number of characters in this token */ }; /* ** An instance of this structure contains information needed to generate ** code for a SELECT that contains aggregate functions. ** ** If Expr.op==TK_AGG_COLUMN or TK_AGG_FUNCTION then Expr.pAggInfo is a ** pointer to this structure. The Expr.iColumn field is the index in ** AggInfo.aCol[] or AggInfo.aFunc[] of information needed to generate ** code for that node. ** ** AggInfo.pGroupBy and AggInfo.aFunc.pExpr point to fields within the ** original Select structure that describes the SELECT statement. These ** fields do not need to be freed when deallocating the AggInfo structure. */ struct AggInfo { u8 directMode; /* Direct rendering mode means take data directly ** from source tables rather than from accumulators */ u8 useSortingIdx; /* In direct mode, reference the sorting index rather ** than the source table */ int sortingIdx; /* Cursor number of the sorting index */ ExprList *pGroupBy; /* The group by clause */ int nSortingColumn; /* Number of columns in the sorting index */ struct AggInfo_col { /* For each column used in source tables */ int iTable; /* Cursor number of the source table */ int iColumn; /* Column number within the source table */ int iSorterColumn; /* Column number in the sorting index */ int iMem; /* Memory location that acts as accumulator */ Expr *pExpr; /* The original expression */ } *aCol; int nColumn; /* Number of used entries in aCol[] */ int nColumnAlloc; /* Number of slots allocated for aCol[] */ int nAccumulator; /* Number of columns that show through to the output. ** Additional columns are used only as parameters to ** aggregate functions */ struct AggInfo_func { /* For each aggregate function */ Expr *pExpr; /* Expression encoding the function */ FuncDef *pFunc; /* The aggregate function implementation */ int iMem; /* Memory location that acts as accumulator */ int iDistinct; /* Virtual table used to enforce DISTINCT */ } *aFunc; int nFunc; /* Number of entries in aFunc[] */ int nFuncAlloc; /* Number of slots allocated for aFunc[] */ }; /* ** Each node of an expression in the parse tree is an instance ** of this structure. ** ** Expr.op is the opcode. The integer parser token codes are reused ** as opcodes here. For example, the parser defines TK_GE to be an integer ** code representing the ">=" operator. This same integer code is reused ** to represent the greater-than-or-equal-to operator in the expression ** tree. ** ** Expr.pRight and Expr.pLeft are subexpressions. Expr.pList is a list ** of argument if the expression is a function. ** ** Expr.token is the operator token for this node. For some expressions ** that have subexpressions, Expr.token can be the complete text that gave ** rise to the Expr. In the latter case, the token is marked as being ** a compound token. ** ** An expression of the form ID or ID.ID refers to a column in a table. ** For such expressions, Expr.op is set to TK_COLUMN and Expr.iTable is ** the integer cursor number of a VDBE cursor pointing to that table and ** Expr.iColumn is the column number for the specific column. If the ** expression is used as a result in an aggregate SELECT, then the ** value is also stored in the Expr.iAgg column in the aggregate so that ** it can be accessed after all aggregates are computed. ** ** If the expression is a function, the Expr.iTable is an integer code ** representing which function. If the expression is an unbound variable ** marker (a question mark character '?' in the original SQL) then the ** Expr.iTable holds the index number for that variable. ** ** If the expression is a subquery then Expr.iColumn holds an integer ** register number containing the result of the subquery. If the ** subquery gives a constant result, then iTable is -1. If the subquery ** gives a different answer at different times during statement processing ** then iTable is the address of a subroutine that computes the subquery. ** ** The Expr.pSelect field points to a SELECT statement. The SELECT might ** be the right operand of an IN operator. Or, if a scalar SELECT appears ** in an expression the opcode is TK_SELECT and Expr.pSelect is the only ** operand. ** ** If the Expr is of type OP_Column, and the table it is selecting from ** is a disk table or the "old.*" pseudo-table, then pTab points to the ** corresponding table definition. */ struct Expr { u8 op; /* Operation performed by this node */ char affinity; /* The affinity of the column or 0 if not a column */ u8 flags; /* Various flags. See below */ CollSeq *pColl; /* The collation type of the column or 0 */ Expr *pLeft, *pRight; /* Left and right subnodes */ ExprList *pList; /* A list of expressions used as function arguments ** or in "<expr> IN (<expr-list)" */ Token token; /* An operand token */ Token span; /* Complete text of the expression */ int iTable, iColumn; /* When op==TK_COLUMN, then this expr node means the ** iColumn-th field of the iTable-th table. */ AggInfo *pAggInfo; /* Used by TK_AGG_COLUMN and TK_AGG_FUNCTION */ int iAgg; /* Which entry in pAggInfo->aCol[] or ->aFunc[] */ int iRightJoinTable; /* If EP_FromJoin, the right table of the join */ Select *pSelect; /* When the expression is a sub-select. Also the ** right side of "<expr> IN (<select>)" */ Table *pTab; /* Table for OP_Column expressions. */ Schema *pSchema; }; /* ** The following are the meanings of bits in the Expr.flags field. */ #define EP_FromJoin 0x01 /* Originated in ON or USING clause of a join */ #define EP_Agg 0x02 /* Contains one or more aggregate functions */ #define EP_Resolved 0x04 /* IDs have been resolved to COLUMNs */ #define EP_Error 0x08 /* Expression contains one or more errors */ #define EP_Distinct 0x10 /* Aggregate function with DISTINCT keyword */ #define EP_VarSelect 0x20 /* pSelect is correlated, not constant */ #define EP_Dequoted 0x40 /* True if the string has been dequoted */ /* ** These macros can be used to test, set, or clear bits in the ** Expr.flags field. */ #define ExprHasProperty(E,P) (((E)->flags&(P))==(P)) #define ExprHasAnyProperty(E,P) (((E)->flags&(P))!=0) #define ExprSetProperty(E,P) (E)->flags|=(P) #define ExprClearProperty(E,P) (E)->flags&=~(P) /* ** A list of expressions. Each expression may optionally have a ** name. An expr/name combination can be used in several ways, such ** as the list of "expr AS ID" fields following a "SELECT" or in the ** list of "ID = expr" items in an UPDATE. A list of expressions can ** also be used as the argument to a function, in which case the a.zName ** field is not used. */ struct ExprList { int nExpr; /* Number of expressions on the list */ int nAlloc; /* Number of entries allocated below */ int iECursor; /* VDBE Cursor associated with this ExprList */ struct ExprList_item { Expr *pExpr; /* The list of expressions */ char *zName; /* Token associated with this expression */ u8 sortOrder; /* 1 for DESC or 0 for ASC */ u8 isAgg; /* True if this is an aggregate like count(*) */ u8 done; /* A flag to indicate when processing is finished */ } *a; /* One entry for each expression */ }; /* ** An instance of this structure can hold a simple list of identifiers, ** such as the list "a,b,c" in the following statements: ** ** INSERT INTO t(a,b,c) VALUES ...; ** CREATE INDEX idx ON t(a,b,c); ** CREATE TRIGGER trig BEFORE UPDATE ON t(a,b,c) ...; ** ** The IdList.a.idx field is used when the IdList represents the list of ** column names after a table name in an INSERT statement. In the statement ** ** INSERT INTO t(a,b,c) ... ** ** If "a" is the k-th column of table "t", then IdList.a[0].idx==k. */ struct IdList { struct IdList_item { char *zName; /* Name of the identifier */ int idx; /* Index in some Table.aCol[] of a column named zName */ } *a; int nId; /* Number of identifiers on the list */ int nAlloc; /* Number of entries allocated for a[] below */ }; /* ** The bitmask datatype defined below is used for various optimizations. */ typedef unsigned int Bitmask; /* ** The following structure describes the FROM clause of a SELECT statement. ** Each table or subquery in the FROM clause is a separate element of ** the SrcList.a[] array. ** ** With the addition of multiple database support, the following structure ** can also be used to describe a particular table such as the table that ** is modified by an INSERT, DELETE, or UPDATE statement. In standard SQL, ** such a table must be a simple name: ID. But in SQLite, the table can ** now be identified by a database name, a dot, then the table name: ID.ID. */ struct SrcList { i16 nSrc; /* Number of tables or subqueries in the FROM clause */ i16 nAlloc; /* Number of entries allocated in a[] below */ struct SrcList_item { char *zDatabase; /* Name of database holding this table */ char *zName; /* Name of the table */ char *zAlias; /* The "B" part of a "A AS B" phrase. zName is the "A" */ Table *pTab; /* An SQL table corresponding to zName */ Select *pSelect; /* A SELECT statement used in place of a table name */ u8 isPopulated; /* Temporary table associated with SELECT is populated */ u8 jointype; /* Type of join between this table and the next */ i16 iCursor; /* The VDBE cursor number used to access this table */ Expr *pOn; /* The ON clause of a join */ IdList *pUsing; /* The USING clause of a join */ Bitmask colUsed; /* Bit N (1<<N) set if column N or pTab is used */ } a[1]; /* One entry for each identifier on the list */ }; /* ** Permitted values of the SrcList.a.jointype field */ #define JT_INNER 0x0001 /* Any kind of inner or cross join */ #define JT_CROSS 0x0002 /* Explicit use of the CROSS keyword */ #define JT_NATURAL 0x0004 /* True for a "natural" join */ #define JT_LEFT 0x0008 /* Left outer join */ #define JT_RIGHT 0x0010 /* Right outer join */ #define JT_OUTER 0x0020 /* The "OUTER" keyword is present */ #define JT_ERROR 0x0040 /* unknown or unsupported join type */ /* ** For each nested loop in a WHERE clause implementation, the WhereInfo ** structure contains a single instance of this structure. This structure ** is intended to be private the the where.c module and should not be ** access or modified by other modules. */ struct WhereLevel { int iFrom; /* Which entry in the FROM clause */ int flags; /* Flags associated with this level */ int iMem; /* First memory cell used by this level */ int iLeftJoin; /* Memory cell used to implement LEFT OUTER JOIN */ Index *pIdx; /* Index used. NULL if no index */ int iTabCur; /* The VDBE cursor used to access the table */ int iIdxCur; /* The VDBE cursor used to acesss pIdx */ int brk; /* Jump here to break out of the loop */ int cont; /* Jump here to continue with the next loop cycle */ int top; /* First instruction of interior of the loop */ int op, p1, p2; /* Opcode used to terminate the loop */ int nEq; /* Number of == or IN constraints on this loop */ int nIn; /* Number of IN operators constraining this loop */ int *aInLoop; /* Loop terminators for IN operators */ }; /* ** The WHERE clause processing routine has two halves. The ** first part does the start of the WHERE loop and the second ** half does the tail of the WHERE loop. An instance of ** this structure is returned by the first half and passed ** into the second half to give some continuity. */ struct WhereInfo { Parse *pParse; SrcList *pTabList; /* List of tables in the join */ int iTop; /* The very beginning of the WHERE loop */ int iContinue; /* Jump here to continue with next record */ int iBreak; /* Jump here to break out of the loop */ int nLevel; /* Number of nested loop */ WhereLevel a[1]; /* Information about each nest loop in the WHERE */ }; /* ** A NameContext defines a context in which to resolve table and column ** names. The context consists of a list of tables (the pSrcList) field and ** a list of named expression (pEList). The named expression list may ** be NULL. The pSrc corresponds to the FROM clause of a SELECT or ** to the table being operated on by INSERT, UPDATE, or DELETE. The ** pEList corresponds to the result set of a SELECT and is NULL for ** other statements. ** ** NameContexts can be nested. When resolving names, the inner-most ** context is searched first. If no match is found, the next outer ** context is checked. If there is still no match, the next context ** is checked. This process continues until either a match is found ** or all contexts are check. When a match is found, the nRef member of ** the context containing the match is incremented. ** ** Each subquery gets a new NameContext. The pNext field points to the ** NameContext in the parent query. Thus the process of scanning the ** NameContext list corresponds to searching through successively outer ** subqueries looking for a match. */ struct NameContext { Parse *pParse; /* The parser */ SrcList *pSrcList; /* One or more tables used to resolve names */ ExprList *pEList; /* Optional list of named expressions */ int nRef; /* Number of names resolved by this context */ int nErr; /* Number of errors encountered while resolving names */ u8 allowAgg; /* Aggregate functions allowed here */ u8 hasAgg; /* True if aggregates are seen */ u8 isCheck; /* True if resolving names in a CHECK constraint */ int nDepth; /* Depth of subquery recursion. 1 for no recursion */ AggInfo *pAggInfo; /* Information about aggregates at this level */ NameContext *pNext; /* Next outer name context. NULL for outermost */ }; /* ** An instance of the following structure contains all information ** needed to generate code for a single SELECT statement. ** ** nLimit is set to -1 if there is no LIMIT clause. nOffset is set to 0. ** If there is a LIMIT clause, the parser sets nLimit to the value of the ** limit and nOffset to the value of the offset (or 0 if there is not ** offset). But later on, nLimit and nOffset become the memory locations ** in the VDBE that record the limit and offset counters. ** ** addrOpenVirt[] entries contain the address of OP_OpenVirtual opcodes. ** These addresses must be stored so that we can go back and fill in ** the P3_KEYINFO and P2 parameters later. Neither the KeyInfo nor ** the number of columns in P2 can be computed at the same time ** as the OP_OpenVirtual instruction is coded because not ** enough information about the compound query is known at that point. ** The KeyInfo for addrOpenVirt[0] and [1] contains collating sequences ** for the result set. The KeyInfo for addrOpenVirt[2] contains collating ** sequences for the ORDER BY clause. */ struct Select { ExprList *pEList; /* The fields of the result */ u8 op; /* One of: TK_UNION TK_ALL TK_INTERSECT TK_EXCEPT */ u8 isDistinct; /* True if the DISTINCT keyword is present */ u8 isResolved; /* True once sqlite3SelectResolve() has run. */ u8 isAgg; /* True if this is an aggregate query */ u8 usesVirt; /* True if uses an OpenVirtual opcode */ u8 disallowOrderBy; /* Do not allow an ORDER BY to be attached if TRUE */ SrcList *pSrc; /* The FROM clause */ Expr *pWhere; /* The WHERE clause */ ExprList *pGroupBy; /* The GROUP BY clause */ Expr *pHaving; /* The HAVING clause */ ExprList *pOrderBy; /* The ORDER BY clause */ Select *pPrior; /* Prior select in a compound select statement */ Select *pRightmost; /* Right-most select in a compound select statement */ Expr *pLimit; /* LIMIT expression. NULL means not used. */ Expr *pOffset; /* OFFSET expression. NULL means not used. */ int iLimit, iOffset; /* Memory registers holding LIMIT & OFFSET counters */ int addrOpenVirt[3]; /* OP_OpenVirtual opcodes related to this select */ }; /* ** The results of a select can be distributed in several ways. */ #define SRT_Union 1 /* Store result as keys in an index */ #define SRT_Except 2 /* Remove result from a UNION index */ #define SRT_Discard 3 /* Do not save the results anywhere */ /* The ORDER BY clause is ignored for all of the above */ #define IgnorableOrderby(X) (X<=SRT_Discard) #define SRT_Callback 4 /* Invoke a callback with each row of result */ #define SRT_Mem 5 /* Store result in a memory cell */ #define SRT_Set 6 /* Store non-null results as keys in an index */ #define SRT_Table 7 /* Store result as data with an automatic rowid */ #define SRT_VirtualTab 8 /* Create virtual table and store like SRT_Table */ #define SRT_Subroutine 9 /* Call a subroutine to handle results */ #define SRT_Exists 10 /* Store 1 if the result is not empty */ /* ** An SQL parser context. A copy of this structure is passed through ** the parser and down into all the parser action routine in order to ** carry around information that is global to the entire parse. ** ** The structure is divided into two parts. When the parser and code ** generate call themselves recursively, the first part of the structure ** is constant but the second part is reset at the beginning and end of ** each recursion. ** ** The nTableLock and aTableLock variables are only used if the shared-cache ** feature is enabled (if sqlite3Tsd()->useSharedData is true). They are ** used to store the set of table-locks required by the statement being ** compiled. Function sqlite3TableLock() is used to add entries to the ** list. */ struct Parse { sqlite3 *db; /* The main database structure */ int rc; /* Return code from execution */ char *zErrMsg; /* An error message */ Vdbe *pVdbe; /* An engine for executing database bytecode */ u8 colNamesSet; /* TRUE after OP_ColumnName has been issued to pVdbe */ u8 nameClash; /* A permanent table name clashes with temp table name */ u8 checkSchema; /* Causes schema cookie check after an error */ u8 nested; /* Number of nested calls to the parser/code generator */ u8 parseError; /* True if a parsing error has been seen */ int nErr; /* Number of errors seen */ int nTab; /* Number of previously allocated VDBE cursors */ int nMem; /* Number of memory cells used so far */ int nSet; /* Number of sets used so far */ int ckOffset; /* Stack offset to data used by CHECK constraints */ u32 writeMask; /* Start a write transaction on these databases */ u32 cookieMask; /* Bitmask of schema verified databases */ int cookieGoto; /* Address of OP_Goto to cookie verifier subroutine */ int cookieValue[MAX_ATTACHED+2]; /* Values of cookies to verify */ #ifndef SQLITE_OMIT_SHARED_CACHE int nTableLock; /* Number of locks in aTableLock */ TableLock *aTableLock; /* Required table locks for shared-cache mode */ #endif /* Above is constant between recursions. Below is reset before and after ** each recursion */ int nVar; /* Number of '?' variables seen in the SQL so far */ int nVarExpr; /* Number of used slots in apVarExpr[] */ int nVarExprAlloc; /* Number of allocated slots in apVarExpr[] */ Expr **apVarExpr; /* Pointers to :aaa and $aaaa wildcard expressions */ u8 explain; /* True if the EXPLAIN flag is found on the query */ Token sErrToken; /* The token at which the error occurred */ Token sNameToken; /* Token with unqualified schema object name */ Token sLastToken; /* The last token parsed */ const char *zSql; /* All SQL text */ const char *zTail; /* All SQL text past the last semicolon parsed */ Table *pNewTable; /* A table being constructed by CREATE TABLE */ Trigger *pNewTrigger; /* Trigger under construct by a CREATE TRIGGER */ TriggerStack *trigStack; /* Trigger actions being coded */ const char *zAuthContext; /* The 6th parameter to db->xAuth callbacks */ }; /* ** An instance of the following structure can be declared on a stack and used ** to save the Parse.zAuthContext value so that it can be restored later. */ struct AuthContext { const char *zAuthContext; /* Put saved Parse.zAuthContext here */ Parse *pParse; /* The Parse structure */ }; /* ** Bitfield flags for P2 value in OP_Insert and OP_Delete */ #define OPFLAG_NCHANGE 1 /* Set to update db->nChange */ #define OPFLAG_LASTROWID 2 /* Set to update db->lastRowid */ #define OPFLAG_ISUPDATE 4 /* This OP_Insert is an sql UPDATE */ /* * Each trigger present in the database schema is stored as an instance of * struct Trigger. * * Pointers to instances of struct Trigger are stored in two ways. * 1. In the "trigHash" hash table (part of the sqlite3* that represents the * database). This allows Trigger structures to be retrieved by name. * 2. All triggers associated with a single table form a linked list, using the * pNext member of struct Trigger. A pointer to the first element of the * linked list is stored as the "pTrigger" member of the associated * struct Table. * * The "step_list" member points to the first element of a linked list * containing the SQL statements specified as the trigger program. */ struct Trigger { char *name; /* The name of the trigger */ char *table; /* The table or view to which the trigger applies */ u8 op; /* One of TK_DELETE, TK_UPDATE, TK_INSERT */ u8 tr_tm; /* One of TRIGGER_BEFORE, TRIGGER_AFTER */ Expr *pWhen; /* The WHEN clause of the expresion (may be NULL) */ IdList *pColumns; /* If this is an UPDATE OF <column-list> trigger, the <column-list> is stored here */ int foreach; /* One of TK_ROW or TK_STATEMENT */ Token nameToken; /* Token containing zName. Use during parsing only */ Schema *pSchema; /* Schema containing the trigger */ Schema *pTabSchema; /* Schema containing the table */ TriggerStep *step_list; /* Link list of trigger program steps */ Trigger *pNext; /* Next trigger associated with the table */ }; /* ** A trigger is either a BEFORE or an AFTER trigger. The following constants ** determine which. ** ** If there are multiple triggers, you might of some BEFORE and some AFTER. ** In that cases, the constants below can be ORed together. */ #define TRIGGER_BEFORE 1 #define TRIGGER_AFTER 2 /* * An instance of struct TriggerStep is used to store a single SQL statement * that is a part of a trigger-program. * * Instances of struct TriggerStep are stored in a singly linked list (linked * using the "pNext" member) referenced by the "step_list" member of the * associated struct Trigger instance. The first element of the linked list is * the first step of the trigger-program. * * The "op" member indicates whether this is a "DELETE", "INSERT", "UPDATE" or * "SELECT" statement. The meanings of the other members is determined by the * value of "op" as follows: * * (op == TK_INSERT) * orconf -> stores the ON CONFLICT algorithm * pSelect -> If this is an INSERT INTO ... SELECT ... statement, then * this stores a pointer to the SELECT statement. Otherwise NULL. * target -> A token holding the name of the table to insert into. * pExprList -> If this is an INSERT INTO ... VALUES ... statement, then * this stores values to be inserted. Otherwise NULL. * pIdList -> If this is an INSERT INTO ... (<column-names>) VALUES ... * statement, then this stores the column-names to be * inserted into. * * (op == TK_DELETE) * target -> A token holding the name of the table to delete from. * pWhere -> The WHERE clause of the DELETE statement if one is specified. * Otherwise NULL. * * (op == TK_UPDATE) * target -> A token holding the name of the table to update rows of. * pWhere -> The WHERE clause of the UPDATE statement if one is specified. * Otherwise NULL. * pExprList -> A list of the columns to update and the expressions to update * them to. See sqlite3Update() documentation of "pChanges" * argument. * */ struct TriggerStep { int op; /* One of TK_DELETE, TK_UPDATE, TK_INSERT, TK_SELECT */ int orconf; /* OE_Rollback etc. */ Trigger *pTrig; /* The trigger that this step is a part of */ Select *pSelect; /* Valid for SELECT and sometimes INSERT steps (when pExprList == 0) */ Token target; /* Valid for DELETE, UPDATE, INSERT steps */ Expr *pWhere; /* Valid for DELETE, UPDATE steps */ ExprList *pExprList; /* Valid for UPDATE statements and sometimes INSERT steps (when pSelect == 0) */ IdList *pIdList; /* Valid for INSERT statements only */ TriggerStep *pNext; /* Next in the link-list */ TriggerStep *pLast; /* Last element in link-list. Valid for 1st elem only */ }; /* * An instance of struct TriggerStack stores information required during code * generation of a single trigger program. While the trigger program is being * coded, its associated TriggerStack instance is pointed to by the * "pTriggerStack" member of the Parse structure. * * The pTab member points to the table that triggers are being coded on. The * newIdx member contains the index of the vdbe cursor that points at the temp * table that stores the new.* references. If new.* references are not valid * for the trigger being coded (for example an ON DELETE trigger), then newIdx * is set to -1. The oldIdx member is analogous to newIdx, for old.* references. * * The ON CONFLICT policy to be used for the trigger program steps is stored * as the orconf member. If this is OE_Default, then the ON CONFLICT clause * specified for individual triggers steps is used. * * struct TriggerStack has a "pNext" member, to allow linked lists to be * constructed. When coding nested triggers (triggers fired by other triggers) * each nested trigger stores its parent trigger's TriggerStack as the "pNext" * pointer. Once the nested trigger has been coded, the pNext value is restored * to the pTriggerStack member of the Parse stucture and coding of the parent * trigger continues. * * Before a nested trigger is coded, the linked list pointed to by the * pTriggerStack is scanned to ensure that the trigger is not about to be coded * recursively. If this condition is detected, the nested trigger is not coded. */ struct TriggerStack { Table *pTab; /* Table that triggers are currently being coded on */ int newIdx; /* Index of vdbe cursor to "new" temp table */ int oldIdx; /* Index of vdbe cursor to "old" temp table */ int orconf; /* Current orconf policy */ int ignoreJump; /* where to jump to for a RAISE(IGNORE) */ Trigger *pTrigger; /* The trigger currently being coded */ TriggerStack *pNext; /* Next trigger down on the trigger stack */ }; /* ** The following structure contains information used by the sqliteFix... ** routines as they walk the parse tree to make database references ** explicit. */ typedef struct DbFixer DbFixer; struct DbFixer { Parse *pParse; /* The parsing context. Error messages written here */ const char *zDb; /* Make sure all objects are contained in this database */ const char *zType; /* Type of the container - used for error messages */ const Token *pName; /* Name of the container - used for error messages */ }; /* ** A pointer to this structure is used to communicate information ** from sqlite3Init and OP_ParseSchema into the sqlite3InitCallback. */ typedef struct { sqlite3 *db; /* The database being initialized */ char **pzErrMsg; /* Error message stored here */ } InitData; /* * This global flag is set for performance testing of triggers. When it is set * SQLite will perform the overhead of building new and old trigger references * even when no triggers exist */ extern int sqlite3_always_code_trigger_setup; /* ** The SQLITE_CORRUPT_BKPT macro can be either a constant (for production ** builds) or a function call (for debugging). If it is a function call, ** it allows the operator to set a breakpoint at the spot where database ** corruption is first detected. */ #ifdef SQLITE_DEBUG extern int sqlite3Corrupt(void); # define SQLITE_CORRUPT_BKPT sqlite3Corrupt() #else # define SQLITE_CORRUPT_BKPT SQLITE_CORRUPT #endif /* ** Internal function prototypes */ int sqlite3StrICmp(const char *, const char *); int sqlite3StrNICmp(const char *, const char *, int); int sqlite3HashNoCase(const char *, int); int sqlite3IsNumber(const char*, int*, u8); int sqlite3Compare(const char *, const char *); int sqlite3SortCompare(const char *, const char *); void sqlite3RealToSortable(double r, char *); void *sqlite3Malloc(int,int); void *sqlite3MallocRaw(int,int); void sqlite3Free(void*); void *sqlite3Realloc(void*,int); char *sqlite3StrDup(const char*); char *sqlite3StrNDup(const char*, int); # define sqlite3CheckMemory(a,b) void sqlite3ReallocOrFree(void**,int); void sqlite3FreeX(void*); void *sqlite3MallocX(int); int sqlite3AllocSize(void *); char *sqlite3MPrintf(const char*, ...); char *sqlite3VMPrintf(const char*, va_list); void sqlite3DebugPrintf(const char*, ...); void *sqlite3TextToPtr(const char*); void sqlite3SetString(char **, ...); void sqlite3ErrorMsg(Parse*, const char*, ...); void sqlite3ErrorClear(Parse*); void sqlite3Dequote(char*); void sqlite3DequoteExpr(Expr*); int sqlite3KeywordCode(const unsigned char*, int); int sqlite3RunParser(Parse*, const char*, char **); void sqlite3FinishCoding(Parse*); Expr *sqlite3Expr(int, Expr*, Expr*, const Token*); Expr *sqlite3RegisterExpr(Parse*,Token*); Expr *sqlite3ExprAnd(Expr*, Expr*); void sqlite3ExprSpan(Expr*,Token*,Token*); Expr *sqlite3ExprFunction(ExprList*, Token*); void sqlite3ExprAssignVarNumber(Parse*, Expr*); void sqlite3ExprDelete(Expr*); ExprList *sqlite3ExprListAppend(ExprList*,Expr*,Token*); void sqlite3ExprListDelete(ExprList*); int sqlite3Init(sqlite3*, char**); int sqlite3InitCallback(void*, int, char**, char**); void sqlite3Pragma(Parse*,Token*,Token*,Token*,int); void sqlite3ResetInternalSchema(sqlite3*, int); void sqlite3BeginParse(Parse*,int); void sqlite3RollbackInternalChanges(sqlite3*); void sqlite3CommitInternalChanges(sqlite3*); Table *sqlite3ResultSetOfSelect(Parse*,char*,Select*); void sqlite3OpenMasterTable(Parse *, int); void sqlite3StartTable(Parse*,Token*,Token*,int,int,int); void sqlite3AddColumn(Parse*,Token*); void sqlite3AddNotNull(Parse*, int); void sqlite3AddPrimaryKey(Parse*, ExprList*, int, int, int); void sqlite3AddCheckConstraint(Parse*, Expr*); void sqlite3AddColumnType(Parse*,Token*); void sqlite3AddDefaultValue(Parse*,Expr*); void sqlite3AddCollateType(Parse*, const char*, int); void sqlite3EndTable(Parse*,Token*,Token*,Select*); #ifndef SQLITE_OMIT_VIEW void sqlite3CreateView(Parse*,Token*,Token*,Token*,Select*,int); int sqlite3ViewGetColumnNames(Parse*,Table*); #else # define sqlite3ViewGetColumnNames(A,B) 0 #endif void sqlite3DropTable(Parse*, SrcList*, int, int); void sqlite3DeleteTable(sqlite3*, Table*); void sqlite3Insert(Parse*, SrcList*, ExprList*, Select*, IdList*, int); int sqlite3ArrayAllocate(void**,int,int); IdList *sqlite3IdListAppend(IdList*, Token*); int sqlite3IdListIndex(IdList*,const char*); SrcList *sqlite3SrcListAppend(SrcList*, Token*, Token*); void sqlite3SrcListAddAlias(SrcList*, Token*); void sqlite3SrcListAssignCursors(Parse*, SrcList*); void sqlite3IdListDelete(IdList*); void sqlite3SrcListDelete(SrcList*); void sqlite3CreateIndex(Parse*,Token*,Token*,SrcList*,ExprList*,int,Token*, Token*, int, int); void sqlite3DropIndex(Parse*, SrcList*, int); void sqlite3AddKeyType(Vdbe*, ExprList*); void sqlite3AddIdxKeyType(Vdbe*, Index*); int sqlite3Select(Parse*, Select*, int, int, Select*, int, int*, char *aff); Select *sqlite3SelectNew(ExprList*,SrcList*,Expr*,ExprList*,Expr*,ExprList*, int,Expr*,Expr*); void sqlite3SelectDelete(Select*); void sqlite3SelectUnbind(Select*); Table *sqlite3SrcListLookup(Parse*, SrcList*); int sqlite3IsReadOnly(Parse*, Table*, int); void sqlite3OpenTable(Parse*, int iCur, int iDb, Table*, int); void sqlite3DeleteFrom(Parse*, SrcList*, Expr*); void sqlite3Update(Parse*, SrcList*, ExprList*, Expr*, int); WhereInfo *sqlite3WhereBegin(Parse*, SrcList*, Expr*, ExprList**); void sqlite3WhereEnd(WhereInfo*); void sqlite3ExprCode(Parse*, Expr*); void sqlite3ExprCodeAndCache(Parse*, Expr*); int sqlite3ExprCodeExprList(Parse*, ExprList*); void sqlite3ExprIfTrue(Parse*, Expr*, int, int); void sqlite3ExprIfFalse(Parse*, Expr*, int, int); void sqlite3NextedParse(Parse*, const char*, ...); Table *sqlite3FindTable(sqlite3*,const char*, const char*); Table *sqlite3LocateTable(Parse*,const char*, const char*); Index *sqlite3FindIndex(sqlite3*,const char*, const char*); void sqlite3UnlinkAndDeleteTable(sqlite3*,int,const char*); void sqlite3UnlinkAndDeleteIndex(sqlite3*,int,const char*); void sqlite3Vacuum(Parse*); int sqlite3RunVacuum(char**, sqlite3*); char *sqlite3NameFromToken(Token*); int sqlite3ExprCheck(Parse*, Expr*, int, int*); int sqlite3ExprCompare(Expr*, Expr*); int sqliteFuncId(Token*); int sqlite3ExprResolveNames(NameContext *, Expr *); int sqlite3ExprAnalyzeAggregates(NameContext*, Expr*); int sqlite3ExprAnalyzeAggList(NameContext*,ExprList*); Vdbe *sqlite3GetVdbe(Parse*); void sqlite3Randomness(int, void*); void sqlite3RollbackAll(sqlite3*); void sqlite3CodeVerifySchema(Parse*, int); void sqlite3BeginTransaction(Parse*, int); void sqlite3CommitTransaction(Parse*); void sqlite3RollbackTransaction(Parse*); int sqlite3ExprIsConstant(Expr*); int sqlite3ExprIsConstantOrFunction(Expr*); int sqlite3ExprIsInteger(Expr*, int*); int sqlite3IsRowid(const char*); void sqlite3GenerateRowDelete(sqlite3*, Vdbe*, Table*, int, int); void sqlite3GenerateRowIndexDelete(Vdbe*, Table*, int, char*); void sqlite3GenerateIndexKey(Vdbe*, Index*, int); void sqlite3GenerateConstraintChecks(Parse*,Table*,int,char*,int,int,int,int); void sqlite3CompleteInsertion(Parse*, Table*, int, char*, int, int, int); void sqlite3OpenTableAndIndices(Parse*, Table*, int, int); void sqlite3BeginWriteOperation(Parse*, int, int); Expr *sqlite3ExprDup(Expr*); void sqlite3TokenCopy(Token*, Token*); ExprList *sqlite3ExprListDup(ExprList*); SrcList *sqlite3SrcListDup(SrcList*); IdList *sqlite3IdListDup(IdList*); Select *sqlite3SelectDup(Select*); FuncDef *sqlite3FindFunction(sqlite3*,const char*,int,int,u8,int); void sqlite3RegisterBuiltinFunctions(sqlite3*); void sqlite3RegisterDateTimeFunctions(sqlite3*); int sqlite3SafetyOn(sqlite3*); int sqlite3SafetyOff(sqlite3*); int sqlite3SafetyCheck(sqlite3*); void sqlite3ChangeCookie(sqlite3*, Vdbe*, int); #ifndef SQLITE_OMIT_TRIGGER void sqlite3BeginTrigger(Parse*, Token*,Token*,int,int,IdList*,SrcList*, int,Expr*,int); void sqlite3FinishTrigger(Parse*, TriggerStep*, Token*); void sqlite3DropTrigger(Parse*, SrcList*); void sqlite3DropTriggerPtr(Parse*, Trigger*); int sqlite3TriggersExist(Parse*, Table*, int, ExprList*); int sqlite3CodeRowTrigger(Parse*, int, ExprList*, int, Table *, int, int, int, int); void sqliteViewTriggers(Parse*, Table*, Expr*, int, ExprList*); void sqlite3DeleteTriggerStep(TriggerStep*); TriggerStep *sqlite3TriggerSelectStep(Select*); TriggerStep *sqlite3TriggerInsertStep(Token*, IdList*, ExprList*,Select*,int); TriggerStep *sqlite3TriggerUpdateStep(Token*, ExprList*, Expr*, int); TriggerStep *sqlite3TriggerDeleteStep(Token*, Expr*); void sqlite3DeleteTrigger(Trigger*); void sqlite3UnlinkAndDeleteTrigger(sqlite3*,int,const char*); #else # define sqlite3TriggersExist(A,B,C,D,E,F) 0 # define sqlite3DeleteTrigger(A) # define sqlite3DropTriggerPtr(A,B) # define sqlite3UnlinkAndDeleteTrigger(A,B,C) # define sqlite3CodeRowTrigger(A,B,C,D,E,F,G,H,I) 0 #endif int sqlite3JoinType(Parse*, Token*, Token*, Token*); void sqlite3CreateForeignKey(Parse*, ExprList*, Token*, ExprList*, int); void sqlite3DeferForeignKey(Parse*, int); #ifndef SQLITE_OMIT_AUTHORIZATION void sqlite3AuthRead(Parse*,Expr*,SrcList*); int sqlite3AuthCheck(Parse*,int, const char*, const char*, const char*); void sqlite3AuthContextPush(Parse*, AuthContext*, const char*); void sqlite3AuthContextPop(AuthContext*); #else # define sqlite3AuthRead(a,b,c) # define sqlite3AuthCheck(a,b,c,d,e) SQLITE_OK # define sqlite3AuthContextPush(a,b,c) # define sqlite3AuthContextPop(a) ((void)(a)) #endif void sqlite3Attach(Parse*, Expr*, Expr*, Expr*); void sqlite3Detach(Parse*, Expr*); int sqlite3BtreeFactory(const sqlite3 *db, const char *zFilename, int omitJournal, int nCache, Btree **ppBtree); int sqlite3FixInit(DbFixer*, Parse*, int, const char*, const Token*); int sqlite3FixSrcList(DbFixer*, SrcList*); int sqlite3FixSelect(DbFixer*, Select*); int sqlite3FixExpr(DbFixer*, Expr*); int sqlite3FixExprList(DbFixer*, ExprList*); int sqlite3FixTriggerStep(DbFixer*, TriggerStep*); int sqlite3AtoF(const char *z, double*); char *sqlite3_snprintf(int,char*,const char*,...); int sqlite3GetInt32(const char *, int*); int sqlite3FitsIn64Bits(const char *); int sqlite3utf16ByteLen(const void *pData, int nChar); int sqlite3utf8CharLen(const char *pData, int nByte); int sqlite3ReadUtf8(const unsigned char *); int sqlite3PutVarint(unsigned char *, u64); int sqlite3GetVarint(const unsigned char *, u64 *); int sqlite3GetVarint32(const unsigned char *, u32 *); int sqlite3VarintLen(u64 v); void sqlite3IndexAffinityStr(Vdbe *, Index *); void sqlite3TableAffinityStr(Vdbe *, Table *); char sqlite3CompareAffinity(Expr *pExpr, char aff2); int sqlite3IndexAffinityOk(Expr *pExpr, char idx_affinity); char sqlite3ExprAffinity(Expr *pExpr); int sqlite3atoi64(const char*, i64*); void sqlite3Error(sqlite3*, int, const char*,...); void *sqlite3HexToBlob(const char *z); int sqlite3TwoPartName(Parse *, Token *, Token *, Token **); const char *sqlite3ErrStr(int); int sqlite3ReadUniChar(const char *zStr, int *pOffset, u8 *pEnc, int fold); int sqlite3ReadSchema(Parse *pParse); CollSeq *sqlite3FindCollSeq(sqlite3*,u8 enc, const char *,int,int); CollSeq *sqlite3LocateCollSeq(Parse *pParse, const char *zName, int nName); CollSeq *sqlite3ExprCollSeq(Parse *pParse, Expr *pExpr); int sqlite3CheckCollSeq(Parse *, CollSeq *); int sqlite3CheckIndexCollSeq(Parse *, Index *); int sqlite3CheckObjectName(Parse *, const char *); void sqlite3VdbeSetChanges(sqlite3 *, int); void sqlite3utf16Substr(sqlite3_context *,int,sqlite3_value **); const void *sqlite3ValueText(sqlite3_value*, u8); int sqlite3ValueBytes(sqlite3_value*, u8); void sqlite3ValueSetStr(sqlite3_value*, int, const void *,u8, void(*)(void*)); void sqlite3ValueFree(sqlite3_value*); sqlite3_value *sqlite3ValueNew(void); char *sqlite3utf16to8(const void*, int); int sqlite3ValueFromExpr(Expr *, u8, u8, sqlite3_value **); void sqlite3ValueApplyAffinity(sqlite3_value *, u8, u8); extern const unsigned char sqlite3UpperToLower[]; void sqlite3RootPageMoved(Db*, int, int); void sqlite3Reindex(Parse*, Token*, Token*); void sqlite3AlterFunctions(sqlite3*); void sqlite3AlterRenameTable(Parse*, SrcList*, Token*); int sqlite3GetToken(const unsigned char *, int *); void sqlite3NestedParse(Parse*, const char*, ...); void sqlite3ExpirePreparedStatements(sqlite3*); void sqlite3CodeSubselect(Parse *, Expr *); int sqlite3SelectResolve(Parse *, Select *, NameContext *); void sqlite3ColumnDefault(Vdbe *, Table *, int); void sqlite3AlterFinishAddColumn(Parse *, Token *); void sqlite3AlterBeginAddColumn(Parse *, SrcList *); const char *sqlite3TestErrorName(int); CollSeq *sqlite3GetCollSeq(sqlite3*, CollSeq *, const char *, int); char sqlite3AffinityType(const Token*); void sqlite3Analyze(Parse*, Token*, Token*); int sqlite3InvokeBusyHandler(BusyHandler*); int sqlite3FindDb(sqlite3*, Token*); void sqlite3AnalysisLoad(sqlite3*,int iDB); void sqlite3DefaultRowEst(Index*); void sqlite3RegisterLikeFunctions(sqlite3*, int); int sqlite3IsLikeFunction(sqlite3*,Expr*,int*,char*); ThreadData *sqlite3ThreadData(void); const ThreadData *sqlite3ThreadDataReadOnly(void); void sqlite3ReleaseThreadData(void); void sqlite3AttachFunctions(sqlite3 *); void sqlite3MinimumFileFormat(Parse*, int, int); void sqlite3SchemaFree(void *); Schema *sqlite3SchemaGet(Btree *); int sqlite3SchemaToIndex(sqlite3 *db, Schema *); KeyInfo *sqlite3IndexKeyinfo(Parse *, Index *); int sqlite3CreateFunc(sqlite3 *, const char *, int, int, void *, void (*)(sqlite3_context*,int,sqlite3_value **), void (*)(sqlite3_context*,int,sqlite3_value **), void (*)(sqlite3_context*)); int sqlite3ApiExit(sqlite3 *db, int); int sqlite3MallocFailed(void); void sqlite3FailedMalloc(void); void sqlite3AbortOtherActiveVdbes(sqlite3 *, Vdbe *); int sqlite3OpenTempDatabase(Parse *); #ifndef SQLITE_OMIT_SHARED_CACHE void sqlite3TableLock(Parse *, int, int, u8, const char *); #else #define sqlite3TableLock(v,w,x,y,z) #endif #ifdef SQLITE_MEMDEBUG void sqlite3MallocDisallow(void); void sqlite3MallocAllow(void); int sqlite3TestMallocFail(void); #else #define sqlite3TestMallocFail() 0 #define sqlite3MallocDisallow() #define sqlite3MallocAllow() #endif #ifdef SQLITE_ENABLE_MEMORY_MANAGEMENT void *sqlite3ThreadSafeMalloc(int); void sqlite3ThreadSafeFree(void *); #else #define sqlite3ThreadSafeMalloc sqlite3MallocX #define sqlite3ThreadSafeFree sqlite3FreeX #endif #ifdef SQLITE_SSE #include "sseInt.h" #endif #endif