view Input/aac/libmp4v2/INTERNALS @ 16:6a86fdd4dea4 trunk

[svn] Replacement libmp4v2.

January 7, 2002

MP4V2 LIBRARY INTERNALS
=======================

This document provides an overview of the internals of the mp4v2 library 
to aid those who wish to modify and extend it. Before reading this document,
I recommend familiarizing yourself with the MP4 (or Quicktime) file format 
standard and the mp4v2 library API. The API is described in a set of man pages
in mpeg4ip/doc/mp4v2, or if you prefer by looking at mp4.h.

All the library code is written in C++, however the library API follows uses
C calling conventions hence is linkable by both C and C++ programs. The
library has been compiled and used on Linux, BSD, Windows, and Mac OS X.
Other than libc, the library has no external dependencies, and hence can
be used independently of the mpeg4ip package if desired.  The library is 
used for both real-time recording and playback in mpeg4ip, and its runtime 
performance is up to those tasks. On the IA32 architecture compiled with gcc,
the stripped library is approximately 600 KB code and initialized data.

It is useful to think of the mp4v2 library as consisting of four layers:
infrastructure, file format, generic tracks, and type specific track helpers.
A description of each layer follows, from the fundamental to the optional.


Infrastructure
==============

The infrastructure layer provides basic file I/O, memory allocation, 
error handling, string utilities, and protected arrays. The source files 
for this layer are mp4file_io, mp4util, and mp4array. 

Note that the array classes uses preprocessor macros instead of C++ 
templates. The rationale for this is to increase portability given the 
sometimes incomplete support by some compilers for templates.


File Format
===========

The file format layer provides the translation from the on-disk MP4 file 
format to in-memory C++ structures and back to disk. It is intended 
to exactly match the MP4 specification in syntax and semantics. It 
represents the majority of the code.

There are three key structures at the file format layer: atoms, properties,
and descriptors. 

Atoms are the primary containers within an mp4 file. They can contain 
any combination of properties, other atoms, or descriptors.

The mp4atom files contain the base class for all the atoms, and provide 
generic functions that cover most cases. Most atoms are covered in
atom_standard.cpp.  Atoms that have a special read, generation or
write needs are contained in their subclass contained in file atom_<name>.cpp,
 where <name> is the four letter name of the atom defined in the MP4 
specification. 

Atoms that only specifies the properties of the atom or the possible child 
atoms in the case of a container atom are located in atom_standard.cpp.

In more specialized cases the atom specific file provides routines to 
initialize, read, or write the atom.

Properties are the atomic pieces of information. The basic types of 
properties are integers, floats, strings, and byte arrays. For integers 
and floats there are subclasses that represent the different storage sizes,
e.g. 8, 16, 24, 32, and 64 bit integers. For strings, there is 1 property 
class with a number of options regarding exact storage details, e.g. null 
terminated, fixed length, counted. 

For implementation reasons, there are also two special properties, table 
and descriptor, that are actually containers for groups of properties. 
I.e by making these containers provide a property interface much code can 
be written in a generic fashion.

The mp4property files contain all the property related classes. 

Descriptors are containers that derive from the MPEG conventions and use 
different encoding rules than the atoms derived from the QuickTime file
format. This means more use of bitfields and conditional existence with 
an emphasis on bit efficiency at the cost of encoding/decoding complexity.
Descriptors can contain other descriptors and/or properties.

The mp4descriptor files contain the generic base class for descriptors. 
Also the mp4property files have a descriptor wrapper class that allows a 
descriptor to behave as if it were a property. The specific descriptors 
are implemented as subclasses of the base class descriptor in manner similar 
to that of atoms. The descriptors, ocidescriptors, and qosqualifiers files 
contain these implementations.

Each atom/property/descriptor has a name closely related to that in the 
MP4 specification. The difference being that the mp4v2 library doesn't 
use '-' or '_' in property names and capitalizes the first letter of each 
word, e.g. "thisIsAPropertyName". A complete name specifies the complete 
container path.  The names follow the C/C++ syntax for elements and array 
indices. 

Examples are:
	"moov.mvhd.duration"
	"moov.trak[2].tkhd.duration"
	"moov.trak[3].minf.mdia.stbl.stsz[101].sampleSize"

Note "*" can be used as a wildcard for an atom name (only). This is most 
useful when dealing with the stsd atom which contains child atoms with 
various names, but shared property names.

Note that internally when performance matters the code looks up a property
by name once, and then stores the returned pointer to the property class.

To add an atom, first you should see if an existing atom exists that
can be used.  If not, you need to decide if special read/write or
generate properties need to be established; for example a property in the atom
changes other properties (adds, or subtracts).  If there are no
special cases, add the atom properties to atom_standard.cpp.  If there
are special properties, add a new file, add a new class to atoms.h, and
add the class to  MP4Atom::CreateAtom in mp4atom.cpp.



Generic Tracks
==============

The two entities at this level are the mp4 file as a whole and the tracks 
which are contained with it. The mp4file and mp4track files contain the 
implementation.

The critical work done by this layer is to map the collection of atoms,
properties, and descriptors that represent a media track into a useful,
and consistent set of operations. For example, reading or writing a media 
sample of a track is a relatively simple operation from the library API
perspective. However there are numerous pieces of information in the mp4
file that need to be properly used and updated to do this. This layer
handles all those details.

Given familiarity with the mp4 spec, the code should be straight-forward.
What may not be immediately obvious are the functions to handle chunks of
media samples. These exist to allow optimization of the mp4 file layout by
reordering the chunks on disk to interleave the media sample chunks of
multiple tracks in time order. (See MP4Optimize API doc).


Type Specific Track Helpers 
===========================

This specialized code goes beyond the meta-information about tracks in
the mp4 file to understanding and manipulating the information in the
track samples. There are currently two helpers in the library: 
the MPEG-4 Systems Helper, and the RTP Hint Track Helper.
 
The MPEG-4 Systems Helper is currently limited to creating the OD, BIFS,
and SDP information about a minimal audio/video scene consistent with
the Internet Streaming Media Alliance (ISMA) specifications. We will be
evaluating how best to generalize the library's helper functions for
MPEG-4 Systems without overburdening the implementation. The code for 
this helper is found in the isma and odcommands files.

The RTP Hint Track Helper is more extensive in its support. The hint 
tracks contain the track packetization information needed to build 
RTP packets for streaming. The library can construct RTP packets based 
on the hint track making RTP based servers significantly easier to write.

All code related to rtp hint tracks is in the rtphint files. It would also
be useful to look at test/mp4broadcaster and mpeg4ip/server/mp4creator for
examples of how this part of the library API can be used.


Library API
===========

The library API is defined and implemented in the mp4 files. The API uses
C linkage conventions, and the mp4.h file adapts itself according to whether
C or C++ is the compilation mode.

All API calls are implemented in mp4.cpp and basically pass thru's to the
MP4File member functions. This ensures that the library has internal access
to the same functions as available via the API. All the calls in mp4.cpp use
C++ try/catch blocks to protect against any runtime errors in the library.
Upon error the library will print a diagnostic message if the verbostiy level
has MP4_DETAILS_ERROR set, and return a distinguished error value, typically
0 or -1.

The test and util subdirectories contain useful examples of how to
use the library. Also the mp4creator and mp4live programs within
mpeg4ip demonstrate more complete usage of the library API.


Debugging
=========

Since mp4 files are fairly complicated, extensive debugging support is
built into the library. Multi-level diagnostic messages are available 
under the control of a verbosity bitmask described in the API.

Also the library provides the MP4Dump() call which provides an ASCII
version of the mp4 file meta-information. The mp4dump utilitity is a
wrapper executable around this function.

The mp4extract program is also provided in the utilities directory
which is useful for extracting a track from an mp4file and putting the
media data back into it's own file. It can also extract each sample of
a track into its own file it that is desired.

When all else fails, mp4 files are amenable to debugging by direct
examination. Since the atom names are four letter ASCII codes finding
reference points in a hex dump is feasible. On UNIX, the od command
is your friend: "od -t x1z -A x [-j 0xXXXXXX] foo.mp4" will print
a hex and ASCII dump, with hex addresses, starting optionally from
a specified offset. The library diagnostic messages can provide
information on where the library is reading or writing.


General caveats
===============
	
The coding convention is to use the C++ throw operator whenever an 
unrecoverable error occurs. This throw is caught at the API layer 
in mp4.cpp and translated into an error value. 

Be careful about indices. Internally, we follow the C/C++ convention 
to use zero-based indices. However the MP4 spec uses one-based indices 
for things like samples and hence the library API uses this convention.