Mercurial > audlegacy
view sqlite/os_unix.c @ 1490:ded11c19cc0a trunk
[svn] - do things in a less hackish way
author | nenolod |
---|---|
date | Thu, 03 Aug 2006 22:54:57 -0700 |
parents | b6b61becdf4e |
children |
line wrap: on
line source
/* ** 2004 May 22 ** ** The author disclaims copyright to this source code. In place of ** a legal notice, here is a blessing: ** ** May you do good and not evil. ** May you find forgiveness for yourself and forgive others. ** May you share freely, never taking more than you give. ** ****************************************************************************** ** ** This file contains code that is specific to Unix systems. */ #include "sqliteInt.h" #include "os.h" #if OS_UNIX /* This file is used on unix only */ /* ** These #defines should enable >2GB file support on Posix if the ** underlying operating system supports it. If the OS lacks ** large file support, these should be no-ops. ** ** Large file support can be disabled using the -DSQLITE_DISABLE_LFS switch ** on the compiler command line. This is necessary if you are compiling ** on a recent machine (ex: RedHat 7.2) but you want your code to work ** on an older machine (ex: RedHat 6.0). If you compile on RedHat 7.2 ** without this option, LFS is enable. But LFS does not exist in the kernel ** in RedHat 6.0, so the code won't work. Hence, for maximum binary ** portability you should omit LFS. */ #ifndef SQLITE_DISABLE_LFS # define _LARGE_FILE 1 # ifndef _FILE_OFFSET_BITS # define _FILE_OFFSET_BITS 64 # endif # define _LARGEFILE_SOURCE 1 #endif /* ** standard include files. */ #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <sys/time.h> #include <errno.h> /* ** If we are to be thread-safe, include the pthreads header and define ** the SQLITE_UNIX_THREADS macro. */ #if defined(THREADSAFE) && THREADSAFE # include <pthread.h> # define SQLITE_UNIX_THREADS 1 #endif /* ** Default permissions when creating a new file */ #ifndef SQLITE_DEFAULT_FILE_PERMISSIONS # define SQLITE_DEFAULT_FILE_PERMISSIONS 0644 #endif /* ** The unixFile structure is subclass of OsFile specific for the unix ** protability layer. */ typedef struct unixFile unixFile; struct unixFile { IoMethod const *pMethod; /* Always the first entry */ struct openCnt *pOpen; /* Info about all open fd's on this inode */ struct lockInfo *pLock; /* Info about locks on this inode */ int h; /* The file descriptor */ unsigned char locktype; /* The type of lock held on this fd */ unsigned char isOpen; /* True if needs to be closed */ unsigned char fullSync; /* Use F_FULLSYNC if available */ int dirfd; /* File descriptor for the directory */ i64 offset; /* Seek offset */ #ifdef SQLITE_UNIX_THREADS pthread_t tid; /* The thread that "owns" this OsFile */ #endif }; /* ** Provide the ability to override some OS-layer functions during ** testing. This is used to simulate OS crashes to verify that ** commits are atomic even in the event of an OS crash. */ #ifdef SQLITE_CRASH_TEST extern int sqlite3CrashTestEnable; extern int sqlite3CrashOpenReadWrite(const char*, OsFile**, int*); extern int sqlite3CrashOpenExclusive(const char*, OsFile**, int); extern int sqlite3CrashOpenReadOnly(const char*, OsFile**, int); # define CRASH_TEST_OVERRIDE(X,A,B,C) \ if(sqlite3CrashTestEnable){ return X(A,B,C); } #else # define CRASH_TEST_OVERRIDE(X,A,B,C) /* no-op */ #endif /* ** Include code that is common to all os_*.c files */ #include "os_common.h" /* ** Do not include any of the File I/O interface procedures if the ** SQLITE_OMIT_DISKIO macro is defined (indicating that the database ** will be in-memory only) */ #ifndef SQLITE_OMIT_DISKIO /* ** Define various macros that are missing from some systems. */ #ifndef O_LARGEFILE # define O_LARGEFILE 0 #endif #ifdef SQLITE_DISABLE_LFS # undef O_LARGEFILE # define O_LARGEFILE 0 #endif #ifndef O_NOFOLLOW # define O_NOFOLLOW 0 #endif #ifndef O_BINARY # define O_BINARY 0 #endif /* ** The DJGPP compiler environment looks mostly like Unix, but it ** lacks the fcntl() system call. So redefine fcntl() to be something ** that always succeeds. This means that locking does not occur under ** DJGPP. But it's DOS - what did you expect? */ #ifdef __DJGPP__ # define fcntl(A,B,C) 0 #endif /* ** The threadid macro resolves to the thread-id or to 0. Used for ** testing and debugging only. */ #ifdef SQLITE_UNIX_THREADS #define threadid pthread_self() #else #define threadid 0 #endif /* ** Set or check the OsFile.tid field. This field is set when an OsFile ** is first opened. All subsequent uses of the OsFile verify that the ** same thread is operating on the OsFile. Some operating systems do ** not allow locks to be overridden by other threads and that restriction ** means that sqlite3* database handles cannot be moved from one thread ** to another. This logic makes sure a user does not try to do that ** by mistake. ** ** Version 3.3.1 (2006-01-15): OsFiles can be moved from one thread to ** another as long as we are running on a system that supports threads ** overriding each others locks (which now the most common behavior) ** or if no locks are held. But the OsFile.pLock field needs to be ** recomputed because its key includes the thread-id. See the ** transferOwnership() function below for additional information */ #if defined(SQLITE_UNIX_THREADS) # define SET_THREADID(X) (X)->tid = pthread_self() # define CHECK_THREADID(X) (threadsOverrideEachOthersLocks==0 && \ !pthread_equal((X)->tid, pthread_self())) #else # define SET_THREADID(X) # define CHECK_THREADID(X) 0 #endif /* ** Here is the dirt on POSIX advisory locks: ANSI STD 1003.1 (1996) ** section 6.5.2.2 lines 483 through 490 specify that when a process ** sets or clears a lock, that operation overrides any prior locks set ** by the same process. It does not explicitly say so, but this implies ** that it overrides locks set by the same process using a different ** file descriptor. Consider this test case: ** ** int fd1 = open("./file1", O_RDWR|O_CREAT, 0644); ** int fd2 = open("./file2", O_RDWR|O_CREAT, 0644); ** ** Suppose ./file1 and ./file2 are really the same file (because ** one is a hard or symbolic link to the other) then if you set ** an exclusive lock on fd1, then try to get an exclusive lock ** on fd2, it works. I would have expected the second lock to ** fail since there was already a lock on the file due to fd1. ** But not so. Since both locks came from the same process, the ** second overrides the first, even though they were on different ** file descriptors opened on different file names. ** ** Bummer. If you ask me, this is broken. Badly broken. It means ** that we cannot use POSIX locks to synchronize file access among ** competing threads of the same process. POSIX locks will work fine ** to synchronize access for threads in separate processes, but not ** threads within the same process. ** ** To work around the problem, SQLite has to manage file locks internally ** on its own. Whenever a new database is opened, we have to find the ** specific inode of the database file (the inode is determined by the ** st_dev and st_ino fields of the stat structure that fstat() fills in) ** and check for locks already existing on that inode. When locks are ** created or removed, we have to look at our own internal record of the ** locks to see if another thread has previously set a lock on that same ** inode. ** ** The OsFile structure for POSIX is no longer just an integer file ** descriptor. It is now a structure that holds the integer file ** descriptor and a pointer to a structure that describes the internal ** locks on the corresponding inode. There is one locking structure ** per inode, so if the same inode is opened twice, both OsFile structures ** point to the same locking structure. The locking structure keeps ** a reference count (so we will know when to delete it) and a "cnt" ** field that tells us its internal lock status. cnt==0 means the ** file is unlocked. cnt==-1 means the file has an exclusive lock. ** cnt>0 means there are cnt shared locks on the file. ** ** Any attempt to lock or unlock a file first checks the locking ** structure. The fcntl() system call is only invoked to set a ** POSIX lock if the internal lock structure transitions between ** a locked and an unlocked state. ** ** 2004-Jan-11: ** More recent discoveries about POSIX advisory locks. (The more ** I discover, the more I realize the a POSIX advisory locks are ** an abomination.) ** ** If you close a file descriptor that points to a file that has locks, ** all locks on that file that are owned by the current process are ** released. To work around this problem, each OsFile structure contains ** a pointer to an openCnt structure. There is one openCnt structure ** per open inode, which means that multiple OsFiles can point to a single ** openCnt. When an attempt is made to close an OsFile, if there are ** other OsFiles open on the same inode that are holding locks, the call ** to close() the file descriptor is deferred until all of the locks clear. ** The openCnt structure keeps a list of file descriptors that need to ** be closed and that list is walked (and cleared) when the last lock ** clears. ** ** First, under Linux threads, because each thread has a separate ** process ID, lock operations in one thread do not override locks ** to the same file in other threads. Linux threads behave like ** separate processes in this respect. But, if you close a file ** descriptor in linux threads, all locks are cleared, even locks ** on other threads and even though the other threads have different ** process IDs. Linux threads is inconsistent in this respect. ** (I'm beginning to think that linux threads is an abomination too.) ** The consequence of this all is that the hash table for the lockInfo ** structure has to include the process id as part of its key because ** locks in different threads are treated as distinct. But the ** openCnt structure should not include the process id in its ** key because close() clears lock on all threads, not just the current ** thread. Were it not for this goofiness in linux threads, we could ** combine the lockInfo and openCnt structures into a single structure. ** ** 2004-Jun-28: ** On some versions of linux, threads can override each others locks. ** On others not. Sometimes you can change the behavior on the same ** system by setting the LD_ASSUME_KERNEL environment variable. The ** POSIX standard is silent as to which behavior is correct, as far ** as I can tell, so other versions of unix might show the same ** inconsistency. There is no little doubt in my mind that posix ** advisory locks and linux threads are profoundly broken. ** ** To work around the inconsistencies, we have to test at runtime ** whether or not threads can override each others locks. This test ** is run once, the first time any lock is attempted. A static ** variable is set to record the results of this test for future ** use. */ /* ** An instance of the following structure serves as the key used ** to locate a particular lockInfo structure given its inode. ** ** If threads cannot override each others locks, then we set the ** lockKey.tid field to the thread ID. If threads can override ** each others locks then tid is always set to zero. tid is omitted ** if we compile without threading support. */ struct lockKey { dev_t dev; /* Device number */ ino_t ino; /* Inode number */ #ifdef SQLITE_UNIX_THREADS pthread_t tid; /* Thread ID or zero if threads can override each other */ #endif }; /* ** An instance of the following structure is allocated for each open ** inode on each thread with a different process ID. (Threads have ** different process IDs on linux, but not on most other unixes.) ** ** A single inode can have multiple file descriptors, so each OsFile ** structure contains a pointer to an instance of this object and this ** object keeps a count of the number of OsFiles pointing to it. */ struct lockInfo { struct lockKey key; /* The lookup key */ int cnt; /* Number of SHARED locks held */ int locktype; /* One of SHARED_LOCK, RESERVED_LOCK etc. */ int nRef; /* Number of pointers to this structure */ }; /* ** An instance of the following structure serves as the key used ** to locate a particular openCnt structure given its inode. This ** is the same as the lockKey except that the thread ID is omitted. */ struct openKey { dev_t dev; /* Device number */ ino_t ino; /* Inode number */ }; /* ** An instance of the following structure is allocated for each open ** inode. This structure keeps track of the number of locks on that ** inode. If a close is attempted against an inode that is holding ** locks, the close is deferred until all locks clear by adding the ** file descriptor to be closed to the pending list. */ struct openCnt { struct openKey key; /* The lookup key */ int nRef; /* Number of pointers to this structure */ int nLock; /* Number of outstanding locks */ int nPending; /* Number of pending close() operations */ int *aPending; /* Malloced space holding fd's awaiting a close() */ }; /* ** These hash tables map inodes and file descriptors (really, lockKey and ** openKey structures) into lockInfo and openCnt structures. Access to ** these hash tables must be protected by a mutex. */ static Hash lockHash = {SQLITE_HASH_BINARY, 0, 0, 0, sqlite3ThreadSafeMalloc, sqlite3ThreadSafeFree, 0, 0}; static Hash openHash = {SQLITE_HASH_BINARY, 0, 0, 0, sqlite3ThreadSafeMalloc, sqlite3ThreadSafeFree, 0, 0}; #ifdef SQLITE_UNIX_THREADS /* ** This variable records whether or not threads can override each others ** locks. ** ** 0: No. Threads cannot override each others locks. ** 1: Yes. Threads can override each others locks. ** -1: We don't know yet. ** ** On some systems, we know at compile-time if threads can override each ** others locks. On those systems, the SQLITE_THREAD_OVERRIDE_LOCK macro ** will be set appropriately. On other systems, we have to check at ** runtime. On these latter systems, SQLTIE_THREAD_OVERRIDE_LOCK is ** undefined. ** ** This variable normally has file scope only. But during testing, we make ** it a global so that the test code can change its value in order to verify ** that the right stuff happens in either case. */ #ifndef SQLITE_THREAD_OVERRIDE_LOCK # define SQLITE_THREAD_OVERRIDE_LOCK -1 #endif #ifdef SQLITE_TEST int threadsOverrideEachOthersLocks = SQLITE_THREAD_OVERRIDE_LOCK; #else static int threadsOverrideEachOthersLocks = SQLITE_THREAD_OVERRIDE_LOCK; #endif /* ** This structure holds information passed into individual test ** threads by the testThreadLockingBehavior() routine. */ struct threadTestData { int fd; /* File to be locked */ struct flock lock; /* The locking operation */ int result; /* Result of the locking operation */ }; #ifdef SQLITE_LOCK_TRACE /* ** Print out information about all locking operations. ** ** This routine is used for troubleshooting locks on multithreaded ** platforms. Enable by compiling with the -DSQLITE_LOCK_TRACE ** command-line option on the compiler. This code is normally ** turned off. */ static int lockTrace(int fd, int op, struct flock *p){ char *zOpName, *zType; int s; int savedErrno; if( op==F_GETLK ){ zOpName = "GETLK"; }else if( op==F_SETLK ){ zOpName = "SETLK"; }else{ s = fcntl(fd, op, p); sqlite3DebugPrintf("fcntl unknown %d %d %d\n", fd, op, s); return s; } if( p->l_type==F_RDLCK ){ zType = "RDLCK"; }else if( p->l_type==F_WRLCK ){ zType = "WRLCK"; }else if( p->l_type==F_UNLCK ){ zType = "UNLCK"; }else{ assert( 0 ); } assert( p->l_whence==SEEK_SET ); s = fcntl(fd, op, p); savedErrno = errno; sqlite3DebugPrintf("fcntl %d %d %s %s %d %d %d %d\n", threadid, fd, zOpName, zType, (int)p->l_start, (int)p->l_len, (int)p->l_pid, s); if( s && op==F_SETLK && (p->l_type==F_RDLCK || p->l_type==F_WRLCK) ){ struct flock l2; l2 = *p; fcntl(fd, F_GETLK, &l2); if( l2.l_type==F_RDLCK ){ zType = "RDLCK"; }else if( l2.l_type==F_WRLCK ){ zType = "WRLCK"; }else if( l2.l_type==F_UNLCK ){ zType = "UNLCK"; }else{ assert( 0 ); } sqlite3DebugPrintf("fcntl-failure-reason: %s %d %d %d\n", zType, (int)l2.l_start, (int)l2.l_len, (int)l2.l_pid); } errno = savedErrno; return s; } #define fcntl lockTrace #endif /* SQLITE_LOCK_TRACE */ /* ** The testThreadLockingBehavior() routine launches two separate ** threads on this routine. This routine attempts to lock a file ** descriptor then returns. The success or failure of that attempt ** allows the testThreadLockingBehavior() procedure to determine ** whether or not threads can override each others locks. */ static void *threadLockingTest(void *pArg){ struct threadTestData *pData = (struct threadTestData*)pArg; pData->result = fcntl(pData->fd, F_SETLK, &pData->lock); return pArg; } /* ** This procedure attempts to determine whether or not threads ** can override each others locks then sets the ** threadsOverrideEachOthersLocks variable appropriately. */ static void testThreadLockingBehavior(int fd_orig){ int fd; struct threadTestData d[2]; pthread_t t[2]; fd = dup(fd_orig); if( fd<0 ) return; memset(d, 0, sizeof(d)); d[0].fd = fd; d[0].lock.l_type = F_RDLCK; d[0].lock.l_len = 1; d[0].lock.l_start = 0; d[0].lock.l_whence = SEEK_SET; d[1] = d[0]; d[1].lock.l_type = F_WRLCK; pthread_create(&t[0], 0, threadLockingTest, &d[0]); pthread_create(&t[1], 0, threadLockingTest, &d[1]); pthread_join(t[0], 0); pthread_join(t[1], 0); close(fd); threadsOverrideEachOthersLocks = d[0].result==0 && d[1].result==0; } #endif /* SQLITE_UNIX_THREADS */ /* ** Release a lockInfo structure previously allocated by findLockInfo(). */ static void releaseLockInfo(struct lockInfo *pLock){ assert( sqlite3OsInMutex(1) ); pLock->nRef--; if( pLock->nRef==0 ){ sqlite3HashInsert(&lockHash, &pLock->key, sizeof(pLock->key), 0); sqlite3ThreadSafeFree(pLock); } } /* ** Release a openCnt structure previously allocated by findLockInfo(). */ static void releaseOpenCnt(struct openCnt *pOpen){ assert( sqlite3OsInMutex(1) ); pOpen->nRef--; if( pOpen->nRef==0 ){ sqlite3HashInsert(&openHash, &pOpen->key, sizeof(pOpen->key), 0); free(pOpen->aPending); sqlite3ThreadSafeFree(pOpen); } } /* ** Given a file descriptor, locate lockInfo and openCnt structures that ** describes that file descriptor. Create new ones if necessary. The ** return values might be uninitialized if an error occurs. ** ** Return the number of errors. */ static int findLockInfo( int fd, /* The file descriptor used in the key */ struct lockInfo **ppLock, /* Return the lockInfo structure here */ struct openCnt **ppOpen /* Return the openCnt structure here */ ){ int rc; struct lockKey key1; struct openKey key2; struct stat statbuf; struct lockInfo *pLock; struct openCnt *pOpen; rc = fstat(fd, &statbuf); if( rc!=0 ) return 1; assert( sqlite3OsInMutex(1) ); memset(&key1, 0, sizeof(key1)); key1.dev = statbuf.st_dev; key1.ino = statbuf.st_ino; #ifdef SQLITE_UNIX_THREADS if( threadsOverrideEachOthersLocks<0 ){ testThreadLockingBehavior(fd); } key1.tid = threadsOverrideEachOthersLocks ? 0 : pthread_self(); #endif memset(&key2, 0, sizeof(key2)); key2.dev = statbuf.st_dev; key2.ino = statbuf.st_ino; pLock = (struct lockInfo*)sqlite3HashFind(&lockHash, &key1, sizeof(key1)); if( pLock==0 ){ struct lockInfo *pOld; pLock = sqlite3ThreadSafeMalloc( sizeof(*pLock) ); if( pLock==0 ){ rc = 1; goto exit_findlockinfo; } pLock->key = key1; pLock->nRef = 1; pLock->cnt = 0; pLock->locktype = 0; pOld = sqlite3HashInsert(&lockHash, &pLock->key, sizeof(key1), pLock); if( pOld!=0 ){ assert( pOld==pLock ); sqlite3ThreadSafeFree(pLock); rc = 1; goto exit_findlockinfo; } }else{ pLock->nRef++; } *ppLock = pLock; if( ppOpen!=0 ){ pOpen = (struct openCnt*)sqlite3HashFind(&openHash, &key2, sizeof(key2)); if( pOpen==0 ){ struct openCnt *pOld; pOpen = sqlite3ThreadSafeMalloc( sizeof(*pOpen) ); if( pOpen==0 ){ releaseLockInfo(pLock); rc = 1; goto exit_findlockinfo; } pOpen->key = key2; pOpen->nRef = 1; pOpen->nLock = 0; pOpen->nPending = 0; pOpen->aPending = 0; pOld = sqlite3HashInsert(&openHash, &pOpen->key, sizeof(key2), pOpen); if( pOld!=0 ){ assert( pOld==pOpen ); sqlite3ThreadSafeFree(pOpen); releaseLockInfo(pLock); rc = 1; goto exit_findlockinfo; } }else{ pOpen->nRef++; } *ppOpen = pOpen; } exit_findlockinfo: return rc; } #ifdef SQLITE_DEBUG /* ** Helper function for printing out trace information from debugging ** binaries. This returns the string represetation of the supplied ** integer lock-type. */ static const char *locktypeName(int locktype){ switch( locktype ){ case NO_LOCK: return "NONE"; case SHARED_LOCK: return "SHARED"; case RESERVED_LOCK: return "RESERVED"; case PENDING_LOCK: return "PENDING"; case EXCLUSIVE_LOCK: return "EXCLUSIVE"; } return "ERROR"; } #endif /* ** If we are currently in a different thread than the thread that the ** unixFile argument belongs to, then transfer ownership of the unixFile ** over to the current thread. ** ** A unixFile is only owned by a thread on systems where one thread is ** unable to override locks created by a different thread. RedHat9 is ** an example of such a system. ** ** Ownership transfer is only allowed if the unixFile is currently unlocked. ** If the unixFile is locked and an ownership is wrong, then return ** SQLITE_MISUSE. SQLITE_OK is returned if everything works. */ #ifdef SQLITE_UNIX_THREADS static int transferOwnership(unixFile *pFile){ int rc; pthread_t hSelf; if( threadsOverrideEachOthersLocks ){ /* Ownership transfers not needed on this system */ return SQLITE_OK; } hSelf = pthread_self(); if( pthread_equal(pFile->tid, hSelf) ){ /* We are still in the same thread */ TRACE1("No-transfer, same thread\n"); return SQLITE_OK; } if( pFile->locktype!=NO_LOCK ){ /* We cannot change ownership while we are holding a lock! */ return SQLITE_MISUSE; } TRACE4("Transfer ownership of %d from %d to %d\n", pFile->h,pFile->tid,hSelf); pFile->tid = hSelf; releaseLockInfo(pFile->pLock); rc = findLockInfo(pFile->h, &pFile->pLock, 0); TRACE5("LOCK %d is now %s(%s,%d)\n", pFile->h, locktypeName(pFile->locktype), locktypeName(pFile->pLock->locktype), pFile->pLock->cnt); return rc; } #else /* On single-threaded builds, ownership transfer is a no-op */ # define transferOwnership(X) SQLITE_OK #endif /* ** Delete the named file */ int sqlite3UnixDelete(const char *zFilename){ unlink(zFilename); return SQLITE_OK; } /* ** Return TRUE if the named file exists. */ int sqlite3UnixFileExists(const char *zFilename){ return access(zFilename, 0)==0; } /* Forward declaration */ static int allocateUnixFile(unixFile *pInit, OsFile **pId); /* ** Attempt to open a file for both reading and writing. If that ** fails, try opening it read-only. If the file does not exist, ** try to create it. ** ** On success, a handle for the open file is written to *id ** and *pReadonly is set to 0 if the file was opened for reading and ** writing or 1 if the file was opened read-only. The function returns ** SQLITE_OK. ** ** On failure, the function returns SQLITE_CANTOPEN and leaves ** *id and *pReadonly unchanged. */ int sqlite3UnixOpenReadWrite( const char *zFilename, OsFile **pId, int *pReadonly ){ int rc; unixFile f; CRASH_TEST_OVERRIDE(sqlite3CrashOpenReadWrite, zFilename, pId, pReadonly); assert( 0==*pId ); f.h = open(zFilename, O_RDWR|O_CREAT|O_LARGEFILE|O_BINARY, SQLITE_DEFAULT_FILE_PERMISSIONS); if( f.h<0 ){ #ifdef EISDIR if( errno==EISDIR ){ return SQLITE_CANTOPEN; } #endif f.h = open(zFilename, O_RDONLY|O_LARGEFILE|O_BINARY); if( f.h<0 ){ return SQLITE_CANTOPEN; } *pReadonly = 1; }else{ *pReadonly = 0; } sqlite3OsEnterMutex(); rc = findLockInfo(f.h, &f.pLock, &f.pOpen); sqlite3OsLeaveMutex(); if( rc ){ close(f.h); return SQLITE_NOMEM; } TRACE3("OPEN %-3d %s\n", f.h, zFilename); return allocateUnixFile(&f, pId); } /* ** Attempt to open a new file for exclusive access by this process. ** The file will be opened for both reading and writing. To avoid ** a potential security problem, we do not allow the file to have ** previously existed. Nor do we allow the file to be a symbolic ** link. ** ** If delFlag is true, then make arrangements to automatically delete ** the file when it is closed. ** ** On success, write the file handle into *id and return SQLITE_OK. ** ** On failure, return SQLITE_CANTOPEN. */ int sqlite3UnixOpenExclusive(const char *zFilename, OsFile **pId, int delFlag){ int rc; unixFile f; CRASH_TEST_OVERRIDE(sqlite3CrashOpenExclusive, zFilename, pId, delFlag); assert( 0==*pId ); f.h = open(zFilename, O_RDWR|O_CREAT|O_EXCL|O_NOFOLLOW|O_LARGEFILE|O_BINARY, SQLITE_DEFAULT_FILE_PERMISSIONS); if( f.h<0 ){ return SQLITE_CANTOPEN; } sqlite3OsEnterMutex(); rc = findLockInfo(f.h, &f.pLock, &f.pOpen); sqlite3OsLeaveMutex(); if( rc ){ close(f.h); unlink(zFilename); return SQLITE_NOMEM; } if( delFlag ){ unlink(zFilename); } TRACE3("OPEN-EX %-3d %s\n", f.h, zFilename); return allocateUnixFile(&f, pId); } /* ** Attempt to open a new file for read-only access. ** ** On success, write the file handle into *id and return SQLITE_OK. ** ** On failure, return SQLITE_CANTOPEN. */ int sqlite3UnixOpenReadOnly(const char *zFilename, OsFile **pId){ int rc; unixFile f; CRASH_TEST_OVERRIDE(sqlite3CrashOpenReadOnly, zFilename, pId, 0); assert( 0==*pId ); f.h = open(zFilename, O_RDONLY|O_LARGEFILE|O_BINARY); if( f.h<0 ){ return SQLITE_CANTOPEN; } sqlite3OsEnterMutex(); rc = findLockInfo(f.h, &f.pLock, &f.pOpen); sqlite3OsLeaveMutex(); if( rc ){ close(f.h); return SQLITE_NOMEM; } TRACE3("OPEN-RO %-3d %s\n", f.h, zFilename); return allocateUnixFile(&f, pId); } /* ** Attempt to open a file descriptor for the directory that contains a ** file. This file descriptor can be used to fsync() the directory ** in order to make sure the creation of a new file is actually written ** to disk. ** ** This routine is only meaningful for Unix. It is a no-op under ** windows since windows does not support hard links. ** ** On success, a handle for a previously open file at *id is ** updated with the new directory file descriptor and SQLITE_OK is ** returned. ** ** On failure, the function returns SQLITE_CANTOPEN and leaves ** *id unchanged. */ static int unixOpenDirectory( OsFile *id, const char *zDirname ){ unixFile *pFile = (unixFile*)id; if( pFile==0 ){ /* Do not open the directory if the corresponding file is not already ** open. */ return SQLITE_CANTOPEN; } SET_THREADID(pFile); assert( pFile->dirfd<0 ); pFile->dirfd = open(zDirname, O_RDONLY|O_BINARY, 0); if( pFile->dirfd<0 ){ return SQLITE_CANTOPEN; } TRACE3("OPENDIR %-3d %s\n", pFile->dirfd, zDirname); return SQLITE_OK; } /* ** If the following global variable points to a string which is the ** name of a directory, then that directory will be used to store ** temporary files. ** ** See also the "PRAGMA temp_store_directory" SQL command. */ char *sqlite3_temp_directory = 0; /* ** Create a temporary file name in zBuf. zBuf must be big enough to ** hold at least SQLITE_TEMPNAME_SIZE characters. */ int sqlite3UnixTempFileName(char *zBuf){ static const char *azDirs[] = { 0, "/var/tmp", "/usr/tmp", "/tmp", ".", }; static const unsigned char zChars[] = "abcdefghijklmnopqrstuvwxyz" "ABCDEFGHIJKLMNOPQRSTUVWXYZ" "0123456789"; int i, j; struct stat buf; const char *zDir = "."; azDirs[0] = sqlite3_temp_directory; for(i=0; i<sizeof(azDirs)/sizeof(azDirs[0]); i++){ if( azDirs[i]==0 ) continue; if( stat(azDirs[i], &buf) ) continue; if( !S_ISDIR(buf.st_mode) ) continue; if( access(azDirs[i], 07) ) continue; zDir = azDirs[i]; break; } do{ sprintf(zBuf, "%s/"TEMP_FILE_PREFIX, zDir); j = strlen(zBuf); sqlite3Randomness(15, &zBuf[j]); for(i=0; i<15; i++, j++){ zBuf[j] = (char)zChars[ ((unsigned char)zBuf[j])%(sizeof(zChars)-1) ]; } zBuf[j] = 0; }while( access(zBuf,0)==0 ); return SQLITE_OK; } /* ** Check that a given pathname is a directory and is writable ** */ int sqlite3UnixIsDirWritable(char *zBuf){ #ifndef SQLITE_OMIT_PAGER_PRAGMAS struct stat buf; if( zBuf==0 ) return 0; if( zBuf[0]==0 ) return 0; if( stat(zBuf, &buf) ) return 0; if( !S_ISDIR(buf.st_mode) ) return 0; if( access(zBuf, 07) ) return 0; #endif /* SQLITE_OMIT_PAGER_PRAGMAS */ return 1; } /* ** Seek to the offset in id->offset then read cnt bytes into pBuf. ** Return the number of bytes actually read. Update the offset. */ static int seekAndRead(unixFile *id, void *pBuf, int cnt){ int got; #ifdef USE_PREAD got = pread(id->h, pBuf, cnt, id->offset); #else lseek(id->h, id->offset, SEEK_SET); got = read(id->h, pBuf, cnt); #endif if( got>0 ){ id->offset += got; } return got; } /* ** Read data from a file into a buffer. Return SQLITE_OK if all ** bytes were read successfully and SQLITE_IOERR if anything goes ** wrong. */ static int unixRead(OsFile *id, void *pBuf, int amt){ int got; assert( id ); SimulateIOError(SQLITE_IOERR); TIMER_START; got = seekAndRead((unixFile*)id, pBuf, amt); TIMER_END; TRACE5("READ %-3d %5d %7d %d\n", ((unixFile*)id)->h, got, last_page, TIMER_ELAPSED); SEEK(0); /* if( got<0 ) got = 0; */ if( got==amt ){ return SQLITE_OK; }else{ return SQLITE_IOERR; } } /* ** Seek to the offset in id->offset then read cnt bytes into pBuf. ** Return the number of bytes actually read. Update the offset. */ static int seekAndWrite(unixFile *id, const void *pBuf, int cnt){ int got; #ifdef USE_PREAD got = pwrite(id->h, pBuf, cnt, id->offset); #else lseek(id->h, id->offset, SEEK_SET); got = write(id->h, pBuf, cnt); #endif if( got>0 ){ id->offset += got; } return got; } /* ** Write data from a buffer into a file. Return SQLITE_OK on success ** or some other error code on failure. */ static int unixWrite(OsFile *id, const void *pBuf, int amt){ int wrote = 0; assert( id ); assert( amt>0 ); SimulateIOError(SQLITE_IOERR); SimulateDiskfullError; TIMER_START; while( amt>0 && (wrote = seekAndWrite((unixFile*)id, pBuf, amt))>0 ){ amt -= wrote; pBuf = &((char*)pBuf)[wrote]; } TIMER_END; TRACE5("WRITE %-3d %5d %7d %d\n", ((unixFile*)id)->h, wrote, last_page, TIMER_ELAPSED); SEEK(0); if( amt>0 ){ return SQLITE_FULL; } return SQLITE_OK; } /* ** Move the read/write pointer in a file. */ static int unixSeek(OsFile *id, i64 offset){ assert( id ); SEEK(offset/1024 + 1); #ifdef SQLITE_TEST if( offset ) SimulateDiskfullError #endif ((unixFile*)id)->offset = offset; return SQLITE_OK; } #ifdef SQLITE_TEST /* ** Count the number of fullsyncs and normal syncs. This is used to test ** that syncs and fullsyncs are occuring at the right times. */ int sqlite3_sync_count = 0; int sqlite3_fullsync_count = 0; #endif /* ** Use the fdatasync() API only if the HAVE_FDATASYNC macro is defined. ** Otherwise use fsync() in its place. */ #ifndef HAVE_FDATASYNC # define fdatasync fsync #endif /* ** Define HAVE_FULLFSYNC to 0 or 1 depending on whether or not ** the F_FULLFSYNC macro is defined. F_FULLFSYNC is currently ** only available on Mac OS X. But that could change. */ #ifdef F_FULLFSYNC # define HAVE_FULLFSYNC 1 #else # define HAVE_FULLFSYNC 0 #endif /* ** The fsync() system call does not work as advertised on many ** unix systems. The following procedure is an attempt to make ** it work better. ** ** The SQLITE_NO_SYNC macro disables all fsync()s. This is useful ** for testing when we want to run through the test suite quickly. ** You are strongly advised *not* to deploy with SQLITE_NO_SYNC ** enabled, however, since with SQLITE_NO_SYNC enabled, an OS crash ** or power failure will likely corrupt the database file. */ static int full_fsync(int fd, int fullSync, int dataOnly){ int rc; /* Record the number of times that we do a normal fsync() and ** FULLSYNC. This is used during testing to verify that this procedure ** gets called with the correct arguments. */ #ifdef SQLITE_TEST if( fullSync ) sqlite3_fullsync_count++; sqlite3_sync_count++; #endif /* If we compiled with the SQLITE_NO_SYNC flag, then syncing is a ** no-op */ #ifdef SQLITE_NO_SYNC rc = SQLITE_OK; #else #if HAVE_FULLFSYNC if( fullSync ){ rc = fcntl(fd, F_FULLFSYNC, 0); }else{ rc = 1; } /* If the FULLSYNC failed, try to do a normal fsync() */ if( rc ) rc = fsync(fd); #else /* if !defined(F_FULLSYNC) */ if( dataOnly ){ rc = fdatasync(fd); }else{ rc = fsync(fd); } #endif /* defined(F_FULLFSYNC) */ #endif /* defined(SQLITE_NO_SYNC) */ return rc; } /* ** Make sure all writes to a particular file are committed to disk. ** ** If dataOnly==0 then both the file itself and its metadata (file ** size, access time, etc) are synced. If dataOnly!=0 then only the ** file data is synced. ** ** Under Unix, also make sure that the directory entry for the file ** has been created by fsync-ing the directory that contains the file. ** If we do not do this and we encounter a power failure, the directory ** entry for the journal might not exist after we reboot. The next ** SQLite to access the file will not know that the journal exists (because ** the directory entry for the journal was never created) and the transaction ** will not roll back - possibly leading to database corruption. */ static int unixSync(OsFile *id, int dataOnly){ unixFile *pFile = (unixFile*)id; assert( pFile ); SimulateIOError(SQLITE_IOERR); TRACE2("SYNC %-3d\n", pFile->h); if( full_fsync(pFile->h, pFile->fullSync, dataOnly) ){ return SQLITE_IOERR; } if( pFile->dirfd>=0 ){ TRACE4("DIRSYNC %-3d (have_fullfsync=%d fullsync=%d)\n", pFile->dirfd, HAVE_FULLFSYNC, pFile->fullSync); #ifndef SQLITE_DISABLE_DIRSYNC /* The directory sync is only attempted if full_fsync is ** turned off or unavailable. If a full_fsync occurred above, ** then the directory sync is superfluous. */ if( (!HAVE_FULLFSYNC || !pFile->fullSync) && full_fsync(pFile->dirfd,0,0) ){ /* ** We have received multiple reports of fsync() returning ** errors when applied to directories on certain file systems. ** A failed directory sync is not a big deal. So it seems ** better to ignore the error. Ticket #1657 */ /* return SQLITE_IOERR; */ } #endif close(pFile->dirfd); /* Only need to sync once, so close the directory */ pFile->dirfd = -1; /* when we are done. */ } return SQLITE_OK; } /* ** Sync the directory zDirname. This is a no-op on operating systems other ** than UNIX. ** ** This is used to make sure the master journal file has truely been deleted ** before making changes to individual journals on a multi-database commit. ** The F_FULLFSYNC option is not needed here. */ int sqlite3UnixSyncDirectory(const char *zDirname){ #ifdef SQLITE_DISABLE_DIRSYNC return SQLITE_OK; #else int fd; int r; SimulateIOError(SQLITE_IOERR); fd = open(zDirname, O_RDONLY|O_BINARY, 0); TRACE3("DIRSYNC %-3d (%s)\n", fd, zDirname); if( fd<0 ){ return SQLITE_CANTOPEN; } r = fsync(fd); close(fd); return ((r==0)?SQLITE_OK:SQLITE_IOERR); #endif } /* ** Truncate an open file to a specified size */ static int unixTruncate(OsFile *id, i64 nByte){ assert( id ); SimulateIOError(SQLITE_IOERR); return ftruncate(((unixFile*)id)->h, nByte)==0 ? SQLITE_OK : SQLITE_IOERR; } /* ** Determine the current size of a file in bytes */ static int unixFileSize(OsFile *id, i64 *pSize){ struct stat buf; assert( id ); SimulateIOError(SQLITE_IOERR); if( fstat(((unixFile*)id)->h, &buf)!=0 ){ return SQLITE_IOERR; } *pSize = buf.st_size; return SQLITE_OK; } /* ** This routine checks if there is a RESERVED lock held on the specified ** file by this or any other process. If such a lock is held, return ** non-zero. If the file is unlocked or holds only SHARED locks, then ** return zero. */ static int unixCheckReservedLock(OsFile *id){ int r = 0; unixFile *pFile = (unixFile*)id; assert( pFile ); sqlite3OsEnterMutex(); /* Because pFile->pLock is shared across threads */ /* Check if a thread in this process holds such a lock */ if( pFile->pLock->locktype>SHARED_LOCK ){ r = 1; } /* Otherwise see if some other process holds it. */ if( !r ){ struct flock lock; lock.l_whence = SEEK_SET; lock.l_start = RESERVED_BYTE; lock.l_len = 1; lock.l_type = F_WRLCK; fcntl(pFile->h, F_GETLK, &lock); if( lock.l_type!=F_UNLCK ){ r = 1; } } sqlite3OsLeaveMutex(); TRACE3("TEST WR-LOCK %d %d\n", pFile->h, r); return r; } /* ** Lock the file with the lock specified by parameter locktype - one ** of the following: ** ** (1) SHARED_LOCK ** (2) RESERVED_LOCK ** (3) PENDING_LOCK ** (4) EXCLUSIVE_LOCK ** ** Sometimes when requesting one lock state, additional lock states ** are inserted in between. The locking might fail on one of the later ** transitions leaving the lock state different from what it started but ** still short of its goal. The following chart shows the allowed ** transitions and the inserted intermediate states: ** ** UNLOCKED -> SHARED ** SHARED -> RESERVED ** SHARED -> (PENDING) -> EXCLUSIVE ** RESERVED -> (PENDING) -> EXCLUSIVE ** PENDING -> EXCLUSIVE ** ** This routine will only increase a lock. Use the sqlite3OsUnlock() ** routine to lower a locking level. */ static int unixLock(OsFile *id, int locktype){ /* The following describes the implementation of the various locks and ** lock transitions in terms of the POSIX advisory shared and exclusive ** lock primitives (called read-locks and write-locks below, to avoid ** confusion with SQLite lock names). The algorithms are complicated ** slightly in order to be compatible with windows systems simultaneously ** accessing the same database file, in case that is ever required. ** ** Symbols defined in os.h indentify the 'pending byte' and the 'reserved ** byte', each single bytes at well known offsets, and the 'shared byte ** range', a range of 510 bytes at a well known offset. ** ** To obtain a SHARED lock, a read-lock is obtained on the 'pending ** byte'. If this is successful, a random byte from the 'shared byte ** range' is read-locked and the lock on the 'pending byte' released. ** ** A process may only obtain a RESERVED lock after it has a SHARED lock. ** A RESERVED lock is implemented by grabbing a write-lock on the ** 'reserved byte'. ** ** A process may only obtain a PENDING lock after it has obtained a ** SHARED lock. A PENDING lock is implemented by obtaining a write-lock ** on the 'pending byte'. This ensures that no new SHARED locks can be ** obtained, but existing SHARED locks are allowed to persist. A process ** does not have to obtain a RESERVED lock on the way to a PENDING lock. ** This property is used by the algorithm for rolling back a journal file ** after a crash. ** ** An EXCLUSIVE lock, obtained after a PENDING lock is held, is ** implemented by obtaining a write-lock on the entire 'shared byte ** range'. Since all other locks require a read-lock on one of the bytes ** within this range, this ensures that no other locks are held on the ** database. ** ** The reason a single byte cannot be used instead of the 'shared byte ** range' is that some versions of windows do not support read-locks. By ** locking a random byte from a range, concurrent SHARED locks may exist ** even if the locking primitive used is always a write-lock. */ int rc = SQLITE_OK; unixFile *pFile = (unixFile*)id; struct lockInfo *pLock = pFile->pLock; struct flock lock; int s; assert( pFile ); TRACE7("LOCK %d %s was %s(%s,%d) pid=%d\n", pFile->h, locktypeName(locktype), locktypeName(pFile->locktype), locktypeName(pLock->locktype), pLock->cnt , getpid()); /* If there is already a lock of this type or more restrictive on the ** OsFile, do nothing. Don't use the end_lock: exit path, as ** sqlite3OsEnterMutex() hasn't been called yet. */ if( pFile->locktype>=locktype ){ TRACE3("LOCK %d %s ok (already held)\n", pFile->h, locktypeName(locktype)); return SQLITE_OK; } /* Make sure the locking sequence is correct */ assert( pFile->locktype!=NO_LOCK || locktype==SHARED_LOCK ); assert( locktype!=PENDING_LOCK ); assert( locktype!=RESERVED_LOCK || pFile->locktype==SHARED_LOCK ); /* This mutex is needed because pFile->pLock is shared across threads */ sqlite3OsEnterMutex(); /* Make sure the current thread owns the pFile. */ rc = transferOwnership(pFile); if( rc!=SQLITE_OK ){ sqlite3OsLeaveMutex(); return rc; } pLock = pFile->pLock; /* If some thread using this PID has a lock via a different OsFile* ** handle that precludes the requested lock, return BUSY. */ if( (pFile->locktype!=pLock->locktype && (pLock->locktype>=PENDING_LOCK || locktype>SHARED_LOCK)) ){ rc = SQLITE_BUSY; goto end_lock; } /* If a SHARED lock is requested, and some thread using this PID already ** has a SHARED or RESERVED lock, then increment reference counts and ** return SQLITE_OK. */ if( locktype==SHARED_LOCK && (pLock->locktype==SHARED_LOCK || pLock->locktype==RESERVED_LOCK) ){ assert( locktype==SHARED_LOCK ); assert( pFile->locktype==0 ); assert( pLock->cnt>0 ); pFile->locktype = SHARED_LOCK; pLock->cnt++; pFile->pOpen->nLock++; goto end_lock; } lock.l_len = 1L; lock.l_whence = SEEK_SET; /* A PENDING lock is needed before acquiring a SHARED lock and before ** acquiring an EXCLUSIVE lock. For the SHARED lock, the PENDING will ** be released. */ if( locktype==SHARED_LOCK || (locktype==EXCLUSIVE_LOCK && pFile->locktype<PENDING_LOCK) ){ lock.l_type = (locktype==SHARED_LOCK?F_RDLCK:F_WRLCK); lock.l_start = PENDING_BYTE; s = fcntl(pFile->h, F_SETLK, &lock); if( s ){ rc = (errno==EINVAL) ? SQLITE_NOLFS : SQLITE_BUSY; goto end_lock; } } /* If control gets to this point, then actually go ahead and make ** operating system calls for the specified lock. */ if( locktype==SHARED_LOCK ){ assert( pLock->cnt==0 ); assert( pLock->locktype==0 ); /* Now get the read-lock */ lock.l_start = SHARED_FIRST; lock.l_len = SHARED_SIZE; s = fcntl(pFile->h, F_SETLK, &lock); /* Drop the temporary PENDING lock */ lock.l_start = PENDING_BYTE; lock.l_len = 1L; lock.l_type = F_UNLCK; if( fcntl(pFile->h, F_SETLK, &lock)!=0 ){ rc = SQLITE_IOERR; /* This should never happen */ goto end_lock; } if( s ){ rc = (errno==EINVAL) ? SQLITE_NOLFS : SQLITE_BUSY; }else{ pFile->locktype = SHARED_LOCK; pFile->pOpen->nLock++; pLock->cnt = 1; } }else if( locktype==EXCLUSIVE_LOCK && pLock->cnt>1 ){ /* We are trying for an exclusive lock but another thread in this ** same process is still holding a shared lock. */ rc = SQLITE_BUSY; }else{ /* The request was for a RESERVED or EXCLUSIVE lock. It is ** assumed that there is a SHARED or greater lock on the file ** already. */ assert( 0!=pFile->locktype ); lock.l_type = F_WRLCK; switch( locktype ){ case RESERVED_LOCK: lock.l_start = RESERVED_BYTE; break; case EXCLUSIVE_LOCK: lock.l_start = SHARED_FIRST; lock.l_len = SHARED_SIZE; break; default: assert(0); } s = fcntl(pFile->h, F_SETLK, &lock); if( s ){ rc = (errno==EINVAL) ? SQLITE_NOLFS : SQLITE_BUSY; } } if( rc==SQLITE_OK ){ pFile->locktype = locktype; pLock->locktype = locktype; }else if( locktype==EXCLUSIVE_LOCK ){ pFile->locktype = PENDING_LOCK; pLock->locktype = PENDING_LOCK; } end_lock: sqlite3OsLeaveMutex(); TRACE4("LOCK %d %s %s\n", pFile->h, locktypeName(locktype), rc==SQLITE_OK ? "ok" : "failed"); return rc; } /* ** Lower the locking level on file descriptor pFile to locktype. locktype ** must be either NO_LOCK or SHARED_LOCK. ** ** If the locking level of the file descriptor is already at or below ** the requested locking level, this routine is a no-op. */ static int unixUnlock(OsFile *id, int locktype){ struct lockInfo *pLock; struct flock lock; int rc = SQLITE_OK; unixFile *pFile = (unixFile*)id; assert( pFile ); TRACE7("UNLOCK %d %d was %d(%d,%d) pid=%d\n", pFile->h, locktype, pFile->locktype, pFile->pLock->locktype, pFile->pLock->cnt, getpid()); assert( locktype<=SHARED_LOCK ); if( pFile->locktype<=locktype ){ return SQLITE_OK; } if( CHECK_THREADID(pFile) ){ return SQLITE_MISUSE; } sqlite3OsEnterMutex(); pLock = pFile->pLock; assert( pLock->cnt!=0 ); if( pFile->locktype>SHARED_LOCK ){ assert( pLock->locktype==pFile->locktype ); if( locktype==SHARED_LOCK ){ lock.l_type = F_RDLCK; lock.l_whence = SEEK_SET; lock.l_start = SHARED_FIRST; lock.l_len = SHARED_SIZE; if( fcntl(pFile->h, F_SETLK, &lock)!=0 ){ /* This should never happen */ rc = SQLITE_IOERR; } } lock.l_type = F_UNLCK; lock.l_whence = SEEK_SET; lock.l_start = PENDING_BYTE; lock.l_len = 2L; assert( PENDING_BYTE+1==RESERVED_BYTE ); if( fcntl(pFile->h, F_SETLK, &lock)==0 ){ pLock->locktype = SHARED_LOCK; }else{ rc = SQLITE_IOERR; /* This should never happen */ } } if( locktype==NO_LOCK ){ struct openCnt *pOpen; /* Decrement the shared lock counter. Release the lock using an ** OS call only when all threads in this same process have released ** the lock. */ pLock->cnt--; if( pLock->cnt==0 ){ lock.l_type = F_UNLCK; lock.l_whence = SEEK_SET; lock.l_start = lock.l_len = 0L; if( fcntl(pFile->h, F_SETLK, &lock)==0 ){ pLock->locktype = NO_LOCK; }else{ rc = SQLITE_IOERR; /* This should never happen */ } } /* Decrement the count of locks against this same file. When the ** count reaches zero, close any other file descriptors whose close ** was deferred because of outstanding locks. */ pOpen = pFile->pOpen; pOpen->nLock--; assert( pOpen->nLock>=0 ); if( pOpen->nLock==0 && pOpen->nPending>0 ){ int i; for(i=0; i<pOpen->nPending; i++){ close(pOpen->aPending[i]); } free(pOpen->aPending); pOpen->nPending = 0; pOpen->aPending = 0; } } sqlite3OsLeaveMutex(); pFile->locktype = locktype; return rc; } /* ** Close a file. */ static int unixClose(OsFile **pId){ unixFile *id = (unixFile*)*pId; if( !id ) return SQLITE_OK; unixUnlock(*pId, NO_LOCK); if( id->dirfd>=0 ) close(id->dirfd); id->dirfd = -1; sqlite3OsEnterMutex(); if( id->pOpen->nLock ){ /* If there are outstanding locks, do not actually close the file just ** yet because that would clear those locks. Instead, add the file ** descriptor to pOpen->aPending. It will be automatically closed when ** the last lock is cleared. */ int *aNew; struct openCnt *pOpen = id->pOpen; aNew = realloc( pOpen->aPending, (pOpen->nPending+1)*sizeof(int) ); if( aNew==0 ){ /* If a malloc fails, just leak the file descriptor */ }else{ pOpen->aPending = aNew; pOpen->aPending[pOpen->nPending] = id->h; pOpen->nPending++; } }else{ /* There are no outstanding locks so we can close the file immediately */ close(id->h); } releaseLockInfo(id->pLock); releaseOpenCnt(id->pOpen); sqlite3OsLeaveMutex(); id->isOpen = 0; TRACE2("CLOSE %-3d\n", id->h); OpenCounter(-1); sqlite3ThreadSafeFree(id); *pId = 0; return SQLITE_OK; } /* ** Turn a relative pathname into a full pathname. Return a pointer ** to the full pathname stored in space obtained from sqliteMalloc(). ** The calling function is responsible for freeing this space once it ** is no longer needed. */ char *sqlite3UnixFullPathname(const char *zRelative){ char *zFull = 0; if( zRelative[0]=='/' ){ sqlite3SetString(&zFull, zRelative, (char*)0); }else{ char *zBuf = sqliteMalloc(5000); if( zBuf==0 ){ return 0; } zBuf[0] = 0; sqlite3SetString(&zFull, getcwd(zBuf, 5000), "/", zRelative, (char*)0); sqliteFree(zBuf); } #if 0 /* ** Remove "/./" path elements and convert "/A/./" path elements ** to just "/". */ if( zFull ){ int i, j; for(i=j=0; zFull[i]; i++){ if( zFull[i]=='/' ){ if( zFull[i+1]=='/' ) continue; if( zFull[i+1]=='.' && zFull[i+2]=='/' ){ i += 1; continue; } if( zFull[i+1]=='.' && zFull[i+2]=='.' && zFull[i+3]=='/' ){ while( j>0 && zFull[j-1]!='/' ){ j--; } i += 3; continue; } } zFull[j++] = zFull[i]; } zFull[j] = 0; } #endif return zFull; } /* ** Change the value of the fullsync flag in the given file descriptor. */ static void unixSetFullSync(OsFile *id, int v){ ((unixFile*)id)->fullSync = v; } /* ** Return the underlying file handle for an OsFile */ static int unixFileHandle(OsFile *id){ return ((unixFile*)id)->h; } /* ** Return an integer that indices the type of lock currently held ** by this handle. (Used for testing and analysis only.) */ static int unixLockState(OsFile *id){ return ((unixFile*)id)->locktype; } /* ** This vector defines all the methods that can operate on an OsFile ** for unix. */ static const IoMethod sqlite3UnixIoMethod = { unixClose, unixOpenDirectory, unixRead, unixWrite, unixSeek, unixTruncate, unixSync, unixSetFullSync, unixFileHandle, unixFileSize, unixLock, unixUnlock, unixLockState, unixCheckReservedLock, }; /* ** Allocate memory for a unixFile. Initialize the new unixFile ** to the value given in pInit and return a pointer to the new ** OsFile. If we run out of memory, close the file and return NULL. */ static int allocateUnixFile(unixFile *pInit, OsFile **pId){ unixFile *pNew; pInit->dirfd = -1; pInit->fullSync = 0; pInit->locktype = 0; pInit->offset = 0; SET_THREADID(pInit); pNew = sqlite3ThreadSafeMalloc( sizeof(unixFile) ); if( pNew==0 ){ close(pInit->h); sqlite3OsEnterMutex(); releaseLockInfo(pInit->pLock); releaseOpenCnt(pInit->pOpen); sqlite3OsLeaveMutex(); *pId = 0; return SQLITE_NOMEM; }else{ *pNew = *pInit; pNew->pMethod = &sqlite3UnixIoMethod; *pId = (OsFile*)pNew; OpenCounter(+1); return SQLITE_OK; } } #endif /* SQLITE_OMIT_DISKIO */ /*************************************************************************** ** Everything above deals with file I/O. Everything that follows deals ** with other miscellanous aspects of the operating system interface ****************************************************************************/ /* ** Get information to seed the random number generator. The seed ** is written into the buffer zBuf[256]. The calling function must ** supply a sufficiently large buffer. */ int sqlite3UnixRandomSeed(char *zBuf){ /* We have to initialize zBuf to prevent valgrind from reporting ** errors. The reports issued by valgrind are incorrect - we would ** prefer that the randomness be increased by making use of the ** uninitialized space in zBuf - but valgrind errors tend to worry ** some users. Rather than argue, it seems easier just to initialize ** the whole array and silence valgrind, even if that means less randomness ** in the random seed. ** ** When testing, initializing zBuf[] to zero is all we do. That means ** that we always use the same random number sequence. This makes the ** tests repeatable. */ memset(zBuf, 0, 256); #if !defined(SQLITE_TEST) { int pid, fd; fd = open("/dev/urandom", O_RDONLY); if( fd<0 ){ time_t t; time(&t); memcpy(zBuf, &t, sizeof(t)); pid = getpid(); memcpy(&zBuf[sizeof(time_t)], &pid, sizeof(pid)); }else{ read(fd, zBuf, 256); close(fd); } } #endif return SQLITE_OK; } /* ** Sleep for a little while. Return the amount of time slept. ** The argument is the number of milliseconds we want to sleep. */ int sqlite3UnixSleep(int ms){ #if defined(HAVE_USLEEP) && HAVE_USLEEP usleep(ms*1000); return ms; #else sleep((ms+999)/1000); return 1000*((ms+999)/1000); #endif } /* ** Static variables used for thread synchronization. ** ** inMutex the nesting depth of the recursive mutex. The thread ** holding mutexMain can read this variable at any time. ** But is must hold mutexAux to change this variable. Other ** threads must hold mutexAux to read the variable and can ** never write. ** ** mutexOwner The thread id of the thread holding mutexMain. Same ** access rules as for inMutex. ** ** mutexOwnerValid True if the value in mutexOwner is valid. The same ** access rules apply as for inMutex. ** ** mutexMain The main mutex. Hold this mutex in order to get exclusive ** access to SQLite data structures. ** ** mutexAux An auxiliary mutex needed to access variables defined above. ** ** Mutexes are always acquired in this order: mutexMain mutexAux. It ** is not necessary to acquire mutexMain in order to get mutexAux - just ** do not attempt to acquire them in the reverse order: mutexAux mutexMain. ** Either get the mutexes with mutexMain first or get mutexAux only. ** ** When running on a platform where the three variables inMutex, mutexOwner, ** and mutexOwnerValid can be set atomically, the mutexAux is not required. ** On many systems, all three are 32-bit integers and writing to a 32-bit ** integer is atomic. I think. But there are no guarantees. So it seems ** safer to protect them using mutexAux. */ static int inMutex = 0; #ifdef SQLITE_UNIX_THREADS static pthread_t mutexOwner; /* Thread holding mutexMain */ static int mutexOwnerValid = 0; /* True if mutexOwner is valid */ static pthread_mutex_t mutexMain = PTHREAD_MUTEX_INITIALIZER; /* The mutex */ static pthread_mutex_t mutexAux = PTHREAD_MUTEX_INITIALIZER; /* Aux mutex */ #endif /* ** The following pair of routine implement mutual exclusion for ** multi-threaded processes. Only a single thread is allowed to ** executed code that is surrounded by EnterMutex() and LeaveMutex(). ** ** SQLite uses only a single Mutex. There is not much critical ** code and what little there is executes quickly and without blocking. ** ** As of version 3.3.2, this mutex must be recursive. */ void sqlite3UnixEnterMutex(){ #ifdef SQLITE_UNIX_THREADS pthread_mutex_lock(&mutexAux); if( !mutexOwnerValid || !pthread_equal(mutexOwner, pthread_self()) ){ pthread_mutex_unlock(&mutexAux); pthread_mutex_lock(&mutexMain); assert( inMutex==0 ); assert( !mutexOwnerValid ); pthread_mutex_lock(&mutexAux); mutexOwner = pthread_self(); mutexOwnerValid = 1; } inMutex++; pthread_mutex_unlock(&mutexAux); #else inMutex++; #endif } void sqlite3UnixLeaveMutex(){ assert( inMutex>0 ); #ifdef SQLITE_UNIX_THREADS pthread_mutex_lock(&mutexAux); inMutex--; assert( pthread_equal(mutexOwner, pthread_self()) ); if( inMutex==0 ){ assert( mutexOwnerValid ); mutexOwnerValid = 0; pthread_mutex_unlock(&mutexMain); } pthread_mutex_unlock(&mutexAux); #else inMutex--; #endif } /* ** Return TRUE if the mutex is currently held. ** ** If the thisThrd parameter is true, return true only if the ** calling thread holds the mutex. If the parameter is false, return ** true if any thread holds the mutex. */ int sqlite3UnixInMutex(int thisThrd){ #ifdef SQLITE_UNIX_THREADS int rc; pthread_mutex_lock(&mutexAux); rc = inMutex>0 && (thisThrd==0 || pthread_equal(mutexOwner,pthread_self())); pthread_mutex_unlock(&mutexAux); return rc; #else return inMutex>0; #endif } /* ** Remember the number of thread-specific-data blocks allocated. ** Use this to verify that we are not leaking thread-specific-data. ** Ticket #1601 */ #ifdef SQLITE_TEST int sqlite3_tsd_count = 0; # ifdef SQLITE_UNIX_THREADS static pthread_mutex_t tsd_counter_mutex = PTHREAD_MUTEX_INITIALIZER; # define TSD_COUNTER(N) \ pthread_mutex_lock(&tsd_counter_mutex); \ sqlite3_tsd_count += N; \ pthread_mutex_unlock(&tsd_counter_mutex); # else # define TSD_COUNTER(N) sqlite3_tsd_count += N # endif #else # define TSD_COUNTER(N) /* no-op */ #endif /* ** If called with allocateFlag>0, then return a pointer to thread ** specific data for the current thread. Allocate and zero the ** thread-specific data if it does not already exist. ** ** If called with allocateFlag==0, then check the current thread ** specific data. Return it if it exists. If it does not exist, ** then return NULL. ** ** If called with allocateFlag<0, check to see if the thread specific ** data is allocated and is all zero. If it is then deallocate it. ** Return a pointer to the thread specific data or NULL if it is ** unallocated or gets deallocated. */ ThreadData *sqlite3UnixThreadSpecificData(int allocateFlag){ static const ThreadData zeroData = {0}; /* Initializer to silence warnings ** from broken compilers */ #ifdef SQLITE_UNIX_THREADS static pthread_key_t key; static int keyInit = 0; ThreadData *pTsd; if( !keyInit ){ sqlite3OsEnterMutex(); if( !keyInit ){ int rc; rc = pthread_key_create(&key, 0); if( rc ){ sqlite3OsLeaveMutex(); return 0; } keyInit = 1; } sqlite3OsLeaveMutex(); } pTsd = pthread_getspecific(key); if( allocateFlag>0 ){ if( pTsd==0 ){ if( !sqlite3TestMallocFail() ){ pTsd = sqlite3OsMalloc(sizeof(zeroData)); } #ifdef SQLITE_MEMDEBUG sqlite3_isFail = 0; #endif if( pTsd ){ *pTsd = zeroData; pthread_setspecific(key, pTsd); TSD_COUNTER(+1); } } }else if( pTsd!=0 && allocateFlag<0 && memcmp(pTsd, &zeroData, sizeof(ThreadData))==0 ){ sqlite3OsFree(pTsd); pthread_setspecific(key, 0); TSD_COUNTER(-1); pTsd = 0; } return pTsd; #else static ThreadData *pTsd = 0; if( allocateFlag>0 ){ if( pTsd==0 ){ if( !sqlite3TestMallocFail() ){ pTsd = sqlite3OsMalloc( sizeof(zeroData) ); } #ifdef SQLITE_MEMDEBUG sqlite3_isFail = 0; #endif if( pTsd ){ *pTsd = zeroData; TSD_COUNTER(+1); } } }else if( pTsd!=0 && allocateFlag<0 && memcmp(pTsd, &zeroData, sizeof(ThreadData))==0 ){ sqlite3OsFree(pTsd); TSD_COUNTER(-1); pTsd = 0; } return pTsd; #endif } /* ** The following variable, if set to a non-zero value, becomes the result ** returned from sqlite3OsCurrentTime(). This is used for testing. */ #ifdef SQLITE_TEST int sqlite3_current_time = 0; #endif /* ** Find the current time (in Universal Coordinated Time). Write the ** current time and date as a Julian Day number into *prNow and ** return 0. Return 1 if the time and date cannot be found. */ int sqlite3UnixCurrentTime(double *prNow){ #ifdef NO_GETTOD time_t t; time(&t); *prNow = t/86400.0 + 2440587.5; #else struct timeval sNow; struct timezone sTz; /* Not used */ gettimeofday(&sNow, &sTz); *prNow = 2440587.5 + sNow.tv_sec/86400.0 + sNow.tv_usec/86400000000.0; #endif #ifdef SQLITE_TEST if( sqlite3_current_time ){ *prNow = sqlite3_current_time/86400.0 + 2440587.5; } #endif return 0; } #endif /* OS_UNIX */