annotate install-sh @ 33780:00803fb0f58e

(hi-lock-refontify): Don't call non-existent jit-lock-fontify-buffer; it should anyway be unneccessary to dp anything special when jit-lock is active. (hi-yellow, hi-pink, hi-green, hi-blue): Fix defface specs.

 1 #! /bin/sh
 2 #
 3 # install - install a program, script, or datafile
 4 # This comes from X11R5 (mit/util/scripts/install.sh).
 5 #
 6 # Copyright 1991 by the Massachusetts Institute of Technology
 7 #
 8 # Permission to use, copy, modify, distribute, and sell this software and its
 9 # documentation for any purpose is hereby granted without fee, provided that
10 # the above copyright notice appear in all copies and that both that
11 # copyright notice and this permission notice appear in supporting
12 # documentation, and that the name of M.I.T. not be used in advertising or
13 # publicity pertaining to distribution of the software without specific,
14 # written prior permission.  M.I.T. makes no representations about the
15 # suitability of this software for any purpose.  It is provided "as is"
16 # without express or implied warranty.
17 #
18 # Calling this script install-sh is preferred over install.sh, to prevent
19 # `make' implicit rules from creating a file called install from it
20 # when there is no Makefile.
21 #
22 # This script is compatible with the BSD install script, but was written
23 # from scratch.  It can only install one file at a time, a restriction
24 # shared with many OS's install programs.
25 
26 
27 # set DOITPROG to echo to test this script
28 
29 # Don't use :- since 4.3BSD and earlier shells don't like it.
30 doit="${DOITPROG-}"
31 
32 
33 # put in absolute paths if you don't have them in your path; or use env. vars.
34 
35 mvprog="${MVPROG-mv}"
36 cpprog="${CPPROG-cp}"
37 chmodprog="${CHMODPROG-chmod}"
38 chownprog="${CHOWNPROG-chown}"
39 chgrpprog="${CHGRPPROG-chgrp}"
40 stripprog="${STRIPPROG-strip}"
41 rmprog="${RMPROG-rm}"
42 mkdirprog="${MKDIRPROG-mkdir}"
43 
44 transformbasename=""
45 transform_arg=""
46 instcmd="$mvprog"
47 chmodcmd="$chmodprog 0755"
48 chowncmd=""
49 chgrpcmd=""
50 stripcmd=""
51 rmcmd="$rmprog -f"
52 mvcmd="$mvprog"
53 src=""
54 dst=""
55 dir_arg=""
56 
57 while [ x"$1" != x ]; do
58     case $1 in
59 	-c) instcmd="$cpprog"
60 	    shift
61 	    continue;;
62 
63 	-d) dir_arg=true
64 	    shift
65 	    continue;;
66 
67 	-m) chmodcmd="$chmodprog $2"
68 	    shift
69 	    shift
70 	    continue;;
71 
72 	-o) chowncmd="$chownprog $2"
73 	    shift
74 	    shift
75 	    continue;;
76 
77 	-g) chgrpcmd="$chgrpprog $2"
78 	    shift
79 	    shift
80 	    continue;;
81 
82 	-s) stripcmd="$stripprog"
83 	    shift
84 	    continue;;
85 
86 	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
87 	    shift
88 	    continue;;
89 
90 	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
91 	    shift
92 	    continue;;
93 
94 	*)  if [ x"$src" = x ]
95 	    then
96 		src=$1
97 	    else
98 		# this colon is to work around a 386BSD /bin/sh bug
99 		:
100 		dst=$1
101 	    fi
102 	    shift
103 	    continue;;
104     esac
105 done
106 
107 if [ x"$src" = x ]
108 then
109 	echo "install:	no input file specified"
110 	exit 1
111 else
112 	true
113 fi
114 
115 if [ x"$dir_arg" != x ]; then
116 	dst=$src
117 	src=""
118 	
119 	if [ -d $dst ]; then
120 		instcmd=:
121 	else
122 		instcmd=mkdir
123 	fi
124 else
125 
126 # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
127 # might cause directories to be created, which would be especially bad 
128 # if $src (and thus $dsttmp) contains '*'.
129 
130 	if [ -f $src -o -d $src ]
131 	then
132 		true
133 	else
134 		echo "install:  $src does not exist"
135 		exit 1
136 	fi
137 	
138 	if [ x"$dst" = x ]
139 	then
140 		echo "install:	no destination specified"
141 		exit 1
142 	else
143 		true
144 	fi
145 
146 # If destination is a directory, append the input filename; if your system
147 # does not like double slashes in filenames, you may need to add some logic
148 
149 	if [ -d $dst ]
150 	then
151 		dst="$dst"/`basename $src`
152 	else
153 		true
154 	fi
155 fi
156 
157 ## this sed command emulates the dirname command
158 dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
159 
160 # Make sure that the destination directory exists.
161 #  this part is taken from Noah Friedman's mkinstalldirs script
162 
163 # Skip lots of stat calls in the usual case.
164 if [ ! -d "$dstdir" ]; then
165 defaultIFS='	
166 '
167 IFS="${IFS-${defaultIFS}}"
168 
169 oIFS="${IFS}"
170 # Some sh's can't handle IFS=/ for some reason.
171 IFS='%'
172 set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
173 IFS="${oIFS}"
174 
175 pathcomp=''
176 
177 while [ $# -ne 0 ] ; do
178 	pathcomp="${pathcomp}${1}"
179 	shift
180 
181 	if [ ! -d "${pathcomp}" ] ;
182         then
183 		$mkdirprog "${pathcomp}"
184 	else
185 		true
186 	fi
187 
188 	pathcomp="${pathcomp}/"
189 done
190 fi
191 
192 if [ x"$dir_arg" != x ]
193 then
194 	$doit $instcmd $dst &&
195 
196 	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
197 	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
198 	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
199 	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
200 else
201 
202 # If we're going to rename the final executable, determine the name now.
203 
204 	if [ x"$transformarg" = x ] 
205 	then
206 		dstfile=`basename $dst`
207 	else
208 		dstfile=`basename $dst $transformbasename | 
209 			sed $transformarg`$transformbasename
210 	fi
211 
212 # don't allow the sed command to completely eliminate the filename
213 
214 	if [ x"$dstfile" = x ] 
215 	then
216 		dstfile=`basename $dst`
217 	else
218 		true
219 	fi
220 
221 # Make a temp file name in the proper directory.
222 
223 	dsttmp=$dstdir/#inst.$$#
224 
225 # Move or copy the file name to the temp name
226 
227 	$doit $instcmd $src $dsttmp &&
228 
229 	trap "rm -f ${dsttmp}" 0 &&
230 
231 # and set any options; do chmod last to preserve setuid bits
232 
233 # If any of these fail, we abort the whole thing.  If we want to
234 # ignore errors from any of these, just make sure not to ignore
235 # errors from the above "$doit $instcmd $src $dsttmp" command.
236 
237 	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
238 	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
239 	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
240 	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
241 
242 # Now rename the file to the real destination.
243 
244 	$doit $rmcmd -f $dstdir/$dstfile &&
245 	$doit $mvcmd $dsttmp $dstdir/$dstfile 
246 
247 fi &&
248 
249 
250 exit 0