Mercurial > emacs
annotate src/sysdep.c @ 2074:0196b8bce529
entered into RCS
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Tue, 09 Mar 1993 05:37:50 +0000 |
parents | c6dc1a37aeb4 |
children | ebc56bb13048 |
rev | line source |
---|---|
491 | 1 /* Interfaces to system-dependent kernel and library entries. |
579 | 2 Copyright (C) 1985, 1986, 1987, 1988, 1992 Free Software Foundation, Inc. |
491 | 3 |
4 This file is part of GNU Emacs. | |
5 | |
6 GNU Emacs is free software; you can redistribute it and/or modify | |
7 it under the terms of the GNU General Public License as published by | |
8 the Free Software Foundation; either version 1, or (at your option) | |
9 any later version. | |
10 | |
11 GNU Emacs is distributed in the hope that it will be useful, | |
12 but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 GNU General Public License for more details. | |
15 | |
16 You should have received a copy of the GNU General Public License | |
17 along with GNU Emacs; see the file COPYING. If not, write to | |
18 the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ | |
19 | |
20 | |
21 #include <signal.h> | |
22 #include <setjmp.h> | |
23 | |
24 #include "config.h" | |
25 #include "lisp.h" | |
26 #undef NULL | |
27 | |
28 #define min(x,y) ((x) > (y) ? (y) : (x)) | |
29 | |
30 /* In this file, open, read and write refer to the system calls, | |
31 not our sugared interfaces sys_open, sys_read and sys_write. | |
32 Contrariwise, for systems where we use the system calls directly, | |
33 define sys_read, etc. here as aliases for them. */ | |
34 #ifndef read | |
35 #define sys_read read | |
36 #define sys_write write | |
37 #endif /* `read' is not a macro */ | |
38 | |
39 #undef read | |
40 #undef write | |
41 | |
42 #ifndef close | |
43 #define sys_close close | |
44 #else | |
45 #undef close | |
46 #endif | |
47 | |
48 #ifndef open | |
49 #define sys_open open | |
50 #else /* `open' is a macro */ | |
51 #undef open | |
52 #endif /* `open' is a macro */ | |
53 | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
54 /* Does anyone other than VMS need this? */ |
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
55 #ifndef fwrite |
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
56 #define sys_fwrite fwrite |
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
57 #else |
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
58 #undef fwrite |
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
59 #endif |
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
60 |
491 | 61 #include <stdio.h> |
62 #include <sys/types.h> | |
63 #include <sys/stat.h> | |
64 #include <errno.h> | |
65 | |
66 extern int errno; | |
67 #ifndef VMS | |
68 extern char *sys_errlist[]; | |
69 #endif | |
70 | |
71 #ifdef VMS | |
72 #include <rms.h> | |
73 #include <ttdef.h> | |
74 #include <tt2def.h> | |
75 #include <iodef.h> | |
76 #include <ssdef.h> | |
77 #include <descrip.h> | |
78 #include <fibdef.h> | |
79 #include <atrdef.h> | |
80 #include <ctype.h> | |
81 #include <string.h> | |
82 #ifdef __GNUC__ | |
83 #include <sys/file.h> | |
84 #else | |
85 #include <file.h> | |
86 #endif | |
87 #undef F_SETFL | |
88 #ifndef RAB$C_BID | |
89 #include <rab.h> | |
90 #endif | |
91 #define MAXIOSIZE ( 32 * PAGESIZE ) /* Don't I/O more than 32 blocks at a time */ | |
92 #endif /* VMS */ | |
93 | |
94 #ifndef BSD4_1 | |
95 #ifdef BSD /* this is done this way to avoid defined (BSD) || defined (USG) | |
96 because the vms compiler doesn't grok `defined' */ | |
97 #include <fcntl.h> | |
98 #endif | |
99 #ifdef USG | |
1014
6e25f9b75841
* sysdep.c (select): There's no need to cast the return value of
Jim Blandy <jimb@redhat.com>
parents:
766
diff
changeset
|
100 #ifndef USG5 |
491 | 101 #include <fcntl.h> |
102 #endif | |
1014
6e25f9b75841
* sysdep.c (select): There's no need to cast the return value of
Jim Blandy <jimb@redhat.com>
parents:
766
diff
changeset
|
103 #endif |
491 | 104 #endif /* not 4.1 bsd */ |
105 | |
106 /* Get DGUX definition for FASYNC - DJB */ | |
107 #ifdef DGUX | |
108 #include <sys/file.h> | |
109 #endif /* DGUX */ | |
110 | |
111 #include <sys/ioctl.h> | |
1048
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
112 #include "systty.h" |
491 | 113 |
114 #ifdef BSD | |
115 #ifdef BSD4_1 | |
116 #include <wait.h> | |
117 #else /* not 4.1 */ | |
118 #include <sys/wait.h> | |
119 #endif /* not 4.1 */ | |
120 #endif /* BSD */ | |
121 | |
122 #ifdef BROKEN_TIOCGWINSZ | |
123 #undef TIOCGWINSZ | |
124 #endif | |
125 | |
126 #ifdef USG | |
127 #include <sys/utsname.h> | |
128 #include <string.h> | |
129 #ifndef MEMORY_IN_STRING_H | |
130 #include <memory.h> | |
131 #endif | |
132 #ifdef TIOCGWINSZ | |
133 #ifdef NEED_SIOCTL | |
134 #include <sys/sioctl.h> | |
135 #endif | |
136 #ifdef NEED_PTEM_H | |
137 #include <sys/stream.h> | |
138 #include <sys/ptem.h> | |
139 #endif | |
140 #endif /* TIOCGWINSZ */ | |
141 #endif /* USG */ | |
142 | |
143 extern int quit_char; | |
144 | |
766 | 145 #include "frame.h" |
491 | 146 #include "window.h" |
147 #include "termhooks.h" | |
148 #include "termchar.h" | |
149 #include "termopts.h" | |
150 #include "dispextern.h" | |
151 #include "process.h" | |
152 | |
153 #ifdef NONSYSTEM_DIR_LIBRARY | |
154 #include "ndir.h" | |
155 #endif /* NONSYSTEM_DIR_LIBRARY */ | |
156 | |
579 | 157 #include "syssignal.h" |
158 #include "systime.h" | |
491 | 159 |
160 static int baud_convert[] = | |
161 #ifdef BAUD_CONVERT | |
162 BAUD_CONVERT; | |
163 #else | |
164 { | |
165 0, 50, 75, 110, 135, 150, 200, 300, 600, 1200, | |
166 1800, 2400, 4800, 9600, 19200, 38400 | |
167 }; | |
168 #endif | |
169 | |
170 extern short ospeed; | |
171 | |
579 | 172 /* The file descriptor for Emacs's input terminal. |
173 Under Unix, this is always left zero; | |
174 under VMS, we place the input channel number here. | |
175 This allows us to write more code that works for both VMS and Unix. */ | |
176 static int input_fd; | |
177 | |
491 | 178 discard_tty_input () |
179 { | |
579 | 180 struct emacs_tty buf; |
491 | 181 |
182 if (noninteractive) | |
183 return; | |
184 | |
185 /* Discarding input is not safe when the input could contain | |
186 replies from the X server. So don't do it. */ | |
187 if (read_socket_hook) | |
188 return; | |
189 | |
190 #ifdef VMS | |
191 end_kbd_input (); | |
579 | 192 SYS$QIOW (0, input_fd, IO$_READVBLK|IO$M_PURGE, input_iosb, 0, 0, |
193 &buf.main, 0, 0, terminator_mask, 0, 0); | |
491 | 194 queue_kbd_input (); |
195 #else /* not VMS */ | |
196 #ifdef APOLLO | |
197 { | |
198 int zero = 0; | |
199 ioctl (0, TIOCFLUSH, &zero); | |
200 } | |
201 #else /* not Apollo */ | |
579 | 202 EMACS_GET_TTY (input_fd, &buf); |
203 EMACS_SET_TTY (input_fd, &buf, 0); | |
491 | 204 #endif /* not Apollo */ |
205 #endif /* not VMS */ | |
206 } | |
207 | |
208 #ifdef SIGTSTP | |
209 | |
210 stuff_char (c) | |
211 char c; | |
212 { | |
213 /* Should perhaps error if in batch mode */ | |
214 #ifdef TIOCSTI | |
215 ioctl (0, TIOCSTI, &c); | |
216 #else /* no TIOCSTI */ | |
217 error ("Cannot stuff terminal input characters in this version of Unix."); | |
218 #endif /* no TIOCSTI */ | |
219 } | |
220 | |
221 #endif /* SIGTSTP */ | |
222 | |
223 init_baud_rate () | |
224 { | |
225 if (noninteractive) | |
226 ospeed = 0; | |
227 else | |
228 { | |
229 #ifdef VMS | |
579 | 230 struct sensemode sg; |
231 | |
232 SYS$QIOW (0, input_fd, IO$_SENSEMODE, &sg, 0, 0, | |
491 | 233 &sg.class, 12, 0, 0, 0, 0 ); |
579 | 234 ospeed = sg.xmit_baud; |
235 #else /* not VMS */ | |
236 #ifdef HAVE_TERMIOS | |
237 struct termios sg; | |
238 | |
239 sg.c_cflag = (sg.c_cflag & ~CBAUD) | B9600; | |
240 tcgetattr (0, &sg); | |
241 ospeed = sg.c_cflag & CBAUD; | |
1048
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
242 #else /* neither VMS nor TERMIOS */ |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
243 #ifdef HAVE_TERMIO |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
244 struct termio sg; |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
245 |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
246 sg.c_cflag = (sg.c_cflag & ~CBAUD) | B9600; |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
247 #ifdef HAVE_TCATTR |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
248 tcgetattr (0, &sg); |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
249 #else |
1570
d978f163d9a4
* sysdep.c (init_baud_rate) [HAVE_TERMIO, not HAVE_TCATTR]: Use
Jim Blandy <jimb@redhat.com>
parents:
1496
diff
changeset
|
250 ioctl (fd, TCGETA, &sg); |
1048
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
251 #endif |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
252 ospeed = sg.c_cflag & CBAUD; |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
253 #else /* neither VMS nor TERMIOS nor TERMIO */ |
579 | 254 struct sgttyb sg; |
255 | |
256 sg.sg_ospeed = B9600; | |
257 ioctl (0, TIOCGETP, &sg); | |
258 ospeed = sg.sg_ospeed; | |
1048
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
259 #endif /* not HAVE_TERMIO */ |
579 | 260 #endif /* not HAVE_TERMIOS */ |
491 | 261 #endif /* not VMS */ |
262 } | |
263 | |
264 baud_rate = (ospeed < sizeof baud_convert / sizeof baud_convert[0] | |
265 ? baud_convert[ospeed] : 9600); | |
266 if (baud_rate == 0) | |
267 baud_rate = 1200; | |
268 } | |
269 | |
270 /*ARGSUSED*/ | |
271 set_exclusive_use (fd) | |
272 int fd; | |
273 { | |
274 #ifdef FIOCLEX | |
275 ioctl (fd, FIOCLEX, 0); | |
276 #endif | |
277 /* Ok to do nothing if this feature does not exist */ | |
278 } | |
279 | |
280 #ifndef subprocesses | |
281 | |
282 wait_without_blocking () | |
283 { | |
284 #ifdef BSD | |
285 wait3 (0, WNOHANG | WUNTRACED, 0); | |
286 #else | |
287 croak ("wait_without_blocking"); | |
288 #endif | |
289 synch_process_alive = 0; | |
290 } | |
291 | |
292 #endif /* not subprocesses */ | |
293 | |
294 int wait_debugging; /* Set nonzero to make following function work under dbx | |
295 (at least for bsd). */ | |
296 | |
297 SIGTYPE | |
298 wait_for_termination_signal () | |
299 {} | |
300 | |
301 /* Wait for subprocess with process id `pid' to terminate and | |
302 make sure it will get eliminated (not remain forever as a zombie) */ | |
303 | |
304 wait_for_termination (pid) | |
305 int pid; | |
306 { | |
307 while (1) | |
308 { | |
309 #ifdef subprocesses | |
310 #ifdef VMS | |
311 int status; | |
312 | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
313 status = SYS$FORCEX (&pid, 0, 0); |
491 | 314 break; |
315 #else /* not VMS */ | |
316 | |
317 /* Exit if the process has terminated. */ | |
318 if (!synch_process_alive) | |
319 break; | |
320 /* Otherwise wait 1 second or until a signal comes in. */ | |
321 signal (SIGALRM, wait_for_termination_signal); | |
322 alarm (1); | |
323 pause (); | |
324 alarm (0); | |
325 signal (SIGALRM, SIG_IGN); | |
326 #endif /* not VMS */ | |
327 #else /* not subprocesses */ | |
328 #ifndef BSD4_1 | |
329 if (kill (pid, 0) < 0) | |
330 break; | |
331 wait (0); | |
332 #else /* BSD4_1 */ | |
333 int status; | |
334 status = wait (0); | |
335 if (status == pid || status == -1) | |
336 break; | |
337 #endif /* BSD4_1 */ | |
338 #endif /* not subprocesses */ | |
339 } | |
340 } | |
341 | |
342 #ifdef subprocesses | |
343 | |
344 /* | |
345 * flush any pending output | |
346 * (may flush input as well; it does not matter the way we use it) | |
347 */ | |
348 | |
349 flush_pending_output (channel) | |
350 int channel; | |
351 { | |
352 #ifdef HAVE_TERMIOS | |
353 /* If we try this, we get hit with SIGTTIN, because | |
354 the child's tty belongs to the child's pgrp. */ | |
355 #else | |
356 #ifdef TCFLSH | |
357 ioctl (channel, TCFLSH, 1); | |
358 #else | |
359 #ifdef TIOCFLUSH | |
360 int zero = 0; | |
361 /* 3rd arg should be ignored | |
362 but some 4.2 kernels actually want the address of an int | |
363 and nonzero means something different. */ | |
364 ioctl (channel, TIOCFLUSH, &zero); | |
365 #endif | |
366 #endif | |
367 #endif | |
368 } | |
369 | |
370 #ifndef VMS | |
371 /* Set up the terminal at the other end of a pseudo-terminal that | |
372 we will be controlling an inferior through. | |
373 It should not echo or do line-editing, since that is done | |
374 in Emacs. No padding needed for insertion into an Emacs buffer. */ | |
375 | |
376 child_setup_tty (out) | |
377 int out; | |
378 { | |
579 | 379 struct emacs_tty s; |
380 | |
381 EMACS_GET_TTY (out, &s); | |
382 | |
1927
c6dc1a37aeb4
* sysdep.c (child_setup_tty): Recognize HAVE_TERMIOS as well as
Jim Blandy <jimb@redhat.com>
parents:
1596
diff
changeset
|
383 #if defined (HAVE_TERMIO) || defined (HAVE_TERMIOS) |
579 | 384 s.main.c_oflag |= OPOST; /* Enable output postprocessing */ |
385 s.main.c_oflag &= ~ONLCR; /* Disable map of NL to CR-NL on output */ | |
386 s.main.c_oflag &= ~(NLDLY|CRDLY|TABDLY|BSDLY|VTDLY|FFDLY); | |
387 /* No output delays */ | |
388 s.main.c_lflag &= ~ECHO; /* Disable echo */ | |
389 s.main.c_lflag |= ISIG; /* Enable signals */ | |
390 s.main.c_iflag &= ~IUCLC; /* Disable map of upper case to lower on | |
391 input */ | |
392 s.main.c_oflag &= ~OLCUC; /* Disable map of lower case to upper on | |
393 output */ | |
394 #if 0 | |
395 /* Said to be unnecesary: */ | |
396 s.main.c_cc[VMIN] = 1; /* minimum number of characters to accept */ | |
397 s.main.c_cc[VTIME] = 0; /* wait forever for at least 1 character */ | |
398 #endif | |
399 | |
400 s.main.c_lflag |= ICANON; /* Enable erase/kill and eof processing */ | |
401 s.main.c_cc[VEOF] = 04; /* insure that EOF is Control-D */ | |
402 s.main.c_cc[VERASE] = 0377; /* disable erase processing */ | |
403 s.main.c_cc[VKILL] = 0377; /* disable kill processing */ | |
404 | |
491 | 405 #ifdef HPUX |
579 | 406 s.main.c_cflag = (s.main.c_cflag & ~CBAUD) | B9600; /* baud rate sanity */ |
491 | 407 #endif /* HPUX */ |
579 | 408 |
491 | 409 #ifdef AIX |
410 /* AIX enhanced edit loses NULs, so disable it */ | |
411 #ifndef IBMR2AIX | |
579 | 412 s.main.c_line = 0; |
413 s.main.c_iflag &= ~ASCEDIT; | |
491 | 414 #endif |
415 /* Also, PTY overloads NUL and BREAK. | |
416 don't ignore break, but don't signal either, so it looks like NUL. */ | |
579 | 417 s.main.c_iflag &= ~IGNBRK; |
418 s.main.c_iflag &= ~BRKINT; | |
419 /* QUIT and INTR work better as signals, so disable character forms */ | |
420 s.main.c_cc[VQUIT] = 0377; | |
421 s.main.c_cc[VINTR] = 0377; | |
422 s.main.c_cc[VEOL] = 0377; | |
423 s.main.c_lflag &= ~ISIG; | |
424 s.main.c_cflag = (s.main.c_cflag & ~CBAUD) | B9600; /* baud rate sanity */ | |
491 | 425 #endif /* AIX */ |
426 | |
427 #else /* not HAVE_TERMIO */ | |
579 | 428 |
429 s.main.sg_flags &= ~(ECHO | CRMOD | ANYP | ALLDELAY | RAW | LCASE | |
430 | CBREAK | TANDEM); | |
431 s.main.sg_erase = 0377; | |
432 s.main.sg_kill = 0377; | |
433 | |
491 | 434 #endif /* not HAVE_TERMIO */ |
435 | |
579 | 436 EMACS_SET_TTY (out, &s, 0); |
491 | 437 |
438 #ifdef BSD4_1 | |
439 if (interrupt_input) | |
440 reset_sigio (); | |
441 #endif /* BSD4_1 */ | |
442 #ifdef RTU | |
443 { | |
444 int zero = 0; | |
445 ioctl (out, FIOASYNC, &zero); | |
446 } | |
447 #endif /* RTU */ | |
448 } | |
449 #endif /* not VMS */ | |
450 | |
451 #endif /* subprocesses */ | |
452 | |
453 /*ARGSUSED*/ | |
454 setpgrp_of_tty (pid) | |
455 int pid; | |
456 { | |
648 | 457 EMACS_SET_TTY_PGRP (input_fd, &pid); |
491 | 458 } |
459 | |
460 /* Record a signal code and the handler for it. */ | |
461 struct save_signal | |
462 { | |
463 int code; | |
464 SIGTYPE (*handler) (); | |
465 }; | |
466 | |
467 /* Suspend the Emacs process; give terminal to its superior. */ | |
468 | |
469 sys_suspend () | |
470 { | |
471 #ifdef VMS | |
1171
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
472 /* "Foster" parentage allows emacs to return to a subprocess that attached |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
473 to the current emacs as a cheaper than starting a whole new process. This |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
474 is set up by KEPTEDITOR.COM. */ |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
475 unsigned long parent_id, foster_parent_id; |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
476 char *fpid_string; |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
477 |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
478 fpid_string = getenv ("EMACS_PARENT_PID"); |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
479 if (fpid_string != NULL) |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
480 { |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
481 sscanf (fpid_string, "%x", &foster_parent_id); |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
482 if (foster_parent_id != 0) |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
483 parent_id = foster_parent_id; |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
484 else |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
485 parent_id = getppid (); |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
486 } |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
487 else |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
488 parent_id = getppid (); |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
489 |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
490 free (fpid_string); /* On VMS, this was malloc'd */ |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
491 |
491 | 492 if (parent_id && parent_id != 0xffffffff) |
493 { | |
494 SIGTYPE (*oldsig)() = (int) signal (SIGINT, SIG_IGN); | |
495 int status = LIB$ATTACH (&parent_id) & 1; | |
496 signal (SIGINT, oldsig); | |
497 return status; | |
498 } | |
499 else | |
500 { | |
501 struct { | |
502 int l; | |
503 char *a; | |
504 } d_prompt; | |
505 d_prompt.l = sizeof ("Emacs: "); /* Our special prompt */ | |
506 d_prompt.a = "Emacs: "; /* Just a reminder */ | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
507 LIB$SPAWN (0, 0, 0, 0, 0, 0, 0, 0, 0, 0, &d_prompt, 0); |
491 | 508 return 1; |
509 } | |
510 return -1; | |
511 #else | |
512 #ifdef SIGTSTP | |
513 | |
579 | 514 EMACS_KILLPG (getpgrp (0), SIGTSTP); |
491 | 515 |
516 #else /* No SIGTSTP */ | |
517 #ifdef USG_JOBCTRL /* If you don't know what this is don't mess with it */ | |
518 ptrace (0, 0, 0, 0); /* set for ptrace - caught by csh */ | |
519 kill (getpid (), SIGQUIT); | |
520 | |
521 #else /* No SIGTSTP or USG_JOBCTRL */ | |
522 | |
523 /* On a system where suspending is not implemented, | |
524 instead fork a subshell and let it talk directly to the terminal | |
525 while we wait. */ | |
526 int pid = fork (); | |
527 struct save_signal saved_handlers[5]; | |
528 | |
529 saved_handlers[0].code = SIGINT; | |
530 saved_handlers[1].code = SIGQUIT; | |
531 saved_handlers[2].code = SIGTERM; | |
532 #ifdef SIGIO | |
533 saved_handlers[3].code = SIGIO; | |
534 saved_handlers[4].code = 0; | |
535 #else | |
536 saved_handlers[3].code = 0; | |
537 #endif | |
538 | |
539 if (pid == -1) | |
540 error ("Can't spawn subshell"); | |
541 if (pid == 0) | |
542 { | |
543 char *sh; | |
544 | |
545 sh = (char *) egetenv ("SHELL"); | |
546 if (sh == 0) | |
547 sh = "sh"; | |
548 /* Use our buffer's default directory for the subshell. */ | |
549 { | |
550 Lisp_Object dir; | |
551 unsigned char *str; | |
552 int len; | |
553 | |
554 /* mentioning current_buffer->buffer would mean including buffer.h, | |
555 which somehow wedges the hp compiler. So instead... */ | |
556 | |
557 dir = intern ("default-directory"); | |
558 /* Can't use NULL */ | |
559 if (XFASTINT (Fboundp (dir)) == XFASTINT (Qnil)) | |
560 goto xyzzy; | |
561 dir = Fsymbol_value (dir); | |
562 if (XTYPE (dir) != Lisp_String) | |
563 goto xyzzy; | |
564 | |
565 str = (unsigned char *) alloca (XSTRING (dir)->size + 2); | |
566 len = XSTRING (dir)->size; | |
567 bcopy (XSTRING (dir)->data, str, len); | |
568 if (str[len - 1] != '/') str[len++] = '/'; | |
569 str[len] = 0; | |
570 chdir (str); | |
571 } | |
572 xyzzy: | |
573 #ifdef subprocesses | |
574 close_process_descs (); /* Close Emacs's pipes/ptys */ | |
575 #endif | |
1203
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
576 |
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
577 #ifdef PRIO_PROCESS |
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
578 { |
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
579 extern int emacs_priority; |
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
580 |
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
581 if (emacs_priority) |
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
582 nice (-emacs_priority); |
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
583 } |
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
584 #endif |
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
585 |
491 | 586 execlp (sh, sh, 0); |
587 write (1, "Can't execute subshell", 22); | |
588 _exit (1); | |
589 } | |
590 | |
591 save_signal_handlers (saved_handlers); | |
592 wait_for_termination (pid); | |
593 restore_signal_handlers (saved_handlers); | |
594 | |
595 #endif /* no USG_JOBCTRL */ | |
596 #endif /* no SIGTSTP */ | |
597 #endif /* not VMS */ | |
598 } | |
599 | |
600 save_signal_handlers (saved_handlers) | |
601 struct save_signal *saved_handlers; | |
602 { | |
603 while (saved_handlers->code) | |
604 { | |
692 | 605 saved_handlers->handler |
606 = (SIGTYPE (*) ()) signal (saved_handlers->code, SIG_IGN); | |
491 | 607 saved_handlers++; |
608 } | |
609 } | |
610 | |
611 restore_signal_handlers (saved_handlers) | |
612 struct save_signal *saved_handlers; | |
613 { | |
614 while (saved_handlers->code) | |
615 { | |
616 signal (saved_handlers->code, saved_handlers->handler); | |
617 saved_handlers++; | |
618 } | |
619 } | |
620 | |
621 #ifdef F_SETFL | |
622 | |
623 int old_fcntl_flags; | |
624 | |
625 init_sigio () | |
626 { | |
627 #ifdef FASYNC | |
628 old_fcntl_flags = fcntl (0, F_GETFL, 0) & ~FASYNC; | |
629 #endif | |
630 request_sigio (); | |
631 } | |
632 | |
633 reset_sigio () | |
634 { | |
635 unrequest_sigio (); | |
636 } | |
637 | |
638 #ifdef FASYNC /* F_SETFL does not imply existance of FASYNC */ | |
639 | |
640 request_sigio () | |
641 { | |
642 #ifdef SIGWINCH | |
638 | 643 sigunblock (sigmask (SIGWINCH)); |
491 | 644 #endif |
645 fcntl (0, F_SETFL, old_fcntl_flags | FASYNC); | |
646 | |
647 interrupts_deferred = 0; | |
648 } | |
649 | |
650 unrequest_sigio () | |
651 { | |
652 #ifdef SIGWINCH | |
638 | 653 sigblock (sigmask (SIGWINCH)); |
491 | 654 #endif |
655 fcntl (0, F_SETFL, old_fcntl_flags); | |
656 interrupts_deferred = 1; | |
657 } | |
658 | |
659 #else /* no FASYNC */ | |
660 #ifdef STRIDE /* Stride doesn't have FASYNC - use FIOASYNC */ | |
661 | |
662 request_sigio () | |
663 { | |
664 int on = 1; | |
665 ioctl (0, FIOASYNC, &on); | |
666 interrupts_deferred = 0; | |
667 } | |
668 | |
669 unrequest_sigio () | |
670 { | |
671 int off = 0; | |
672 | |
673 ioctl (0, FIOASYNC, &off); | |
674 interrupts_deferred = 1; | |
675 } | |
676 | |
677 #else /* not FASYNC, not STRIDE */ | |
678 | |
679 request_sigio () | |
680 { | |
681 croak ("request_sigio"); | |
682 } | |
683 | |
684 unrequest_sigio () | |
685 { | |
686 croak ("unrequest_sigio"); | |
687 } | |
688 | |
689 #endif /* STRIDE */ | |
690 #endif /* FASYNC */ | |
691 #endif /* F_SETFL */ | |
692 | |
579 | 693 /* The initial tty mode bits */ |
694 struct emacs_tty old_tty; | |
491 | 695 |
696 int term_initted; /* 1 if outer tty status has been recorded */ | |
697 | |
579 | 698 #ifdef BSD4_1 |
699 /* BSD 4.1 needs to keep track of the lmode bits in order to start | |
700 sigio. */ | |
701 int lmode; | |
702 #endif | |
703 | |
491 | 704 #ifdef F_SETOWN |
705 int old_fcntl_owner; | |
706 #endif /* F_SETOWN */ | |
707 | |
708 /* This may also be defined in stdio, | |
709 but if so, this does no harm, | |
710 and using the same name avoids wasting the other one's space. */ | |
711 | |
712 #if defined (USG) || defined (DGUX) | |
713 unsigned char _sobuf[BUFSIZ+8]; | |
714 #else | |
715 char _sobuf[BUFSIZ]; | |
716 #endif | |
717 | |
718 #ifdef TIOCGLTC | |
719 static struct ltchars new_ltchars = {-1,-1,-1,-1,-1,-1}; | |
720 #endif | |
721 #ifdef TIOCGETC | |
722 static struct tchars new_tchars = {-1,-1,-1,-1,-1,-1}; | |
723 #endif | |
724 | |
725 init_sys_modes () | |
726 { | |
579 | 727 struct emacs_tty tty; |
728 | |
491 | 729 #ifdef VMS |
730 #if 0 | |
731 static int oob_chars[2] = {0, 1 << 7}; /* catch C-g's */ | |
732 extern int (*interrupt_signal) (); | |
733 #endif | |
734 #endif | |
735 | |
736 if (noninteractive) | |
737 return; | |
738 | |
739 #ifdef VMS | |
740 if (!input_ef) | |
741 input_ef = get_kbd_event_flag (); | |
742 /* LIB$GET_EF (&input_ef); */ | |
743 SYS$CLREF (input_ef); | |
744 waiting_for_ast = 0; | |
745 if (!timer_ef) | |
746 timer_ef = get_timer_event_flag (); | |
747 /* LIB$GET_EF (&timer_ef); */ | |
748 SYS$CLREF (timer_ef); | |
749 if (!process_ef) | |
750 { | |
751 LIB$GET_EF (&process_ef); | |
752 SYS$CLREF (process_ef); | |
753 } | |
754 if (input_ef / 32 != process_ef / 32) | |
755 croak ("Input and process event flags in different clusters."); | |
756 if (input_ef / 32 != timer_ef / 32) | |
757 croak ("Input and process event flags in different clusters."); | |
758 input_eflist = ((unsigned) 1 << (input_ef % 32)) | | |
759 ((unsigned) 1 << (process_ef % 32)); | |
760 timer_eflist = ((unsigned) 1 << (input_ef % 32)) | | |
761 ((unsigned) 1 << (timer_ef % 32)); | |
762 #ifndef VMS4_4 | |
763 sys_access_reinit (); | |
764 #endif | |
765 #endif /* not VMS */ | |
579 | 766 |
767 EMACS_GET_TTY (input_fd, &old_tty); | |
768 | |
491 | 769 if (!read_socket_hook && EQ (Vwindow_system, Qnil)) |
770 { | |
579 | 771 tty = old_tty; |
491 | 772 |
1927
c6dc1a37aeb4
* sysdep.c (child_setup_tty): Recognize HAVE_TERMIOS as well as
Jim Blandy <jimb@redhat.com>
parents:
1596
diff
changeset
|
773 #if defined (HAVE_TERMIO) || defined (HAVE_TERMIOS) |
579 | 774 tty.main.c_iflag |= (IGNBRK); /* Ignore break condition */ |
775 tty.main.c_iflag &= ~ICRNL; /* Disable map of CR to NL on input */ | |
491 | 776 #ifdef ISTRIP |
579 | 777 tty.main.c_iflag &= ~ISTRIP; /* don't strip 8th bit on input */ |
491 | 778 #endif |
579 | 779 tty.main.c_lflag &= ~ECHO; /* Disable echo */ |
780 tty.main.c_lflag &= ~ICANON; /* Disable erase/kill processing */ | |
1102
ff73961932eb
(init_sys_modes): Handle VDSUSP like V_DSUSP.
Richard M. Stallman <rms@gnu.org>
parents:
1048
diff
changeset
|
781 #ifdef IEXTEN |
ff73961932eb
(init_sys_modes): Handle VDSUSP like V_DSUSP.
Richard M. Stallman <rms@gnu.org>
parents:
1048
diff
changeset
|
782 tty.main.c_iflag &= ~IEXTEN; /* Disable other editing characters. */ |
ff73961932eb
(init_sys_modes): Handle VDSUSP like V_DSUSP.
Richard M. Stallman <rms@gnu.org>
parents:
1048
diff
changeset
|
783 #endif |
579 | 784 tty.main.c_lflag |= ISIG; /* Enable signals */ |
491 | 785 if (flow_control) |
786 { | |
579 | 787 tty.main.c_iflag |= IXON; /* Enable start/stop output control */ |
491 | 788 #ifdef IXANY |
579 | 789 tty.main.c_iflag &= ~IXANY; |
491 | 790 #endif /* IXANY */ |
791 } | |
792 else | |
579 | 793 tty.main.c_iflag &= ~IXON; /* Disable start/stop output control */ |
794 tty.main.c_oflag &= ~ONLCR; /* Disable map of NL to CR-NL | |
795 on output */ | |
796 tty.main.c_oflag &= ~TAB3; /* Disable tab expansion */ | |
491 | 797 #ifdef CS8 |
798 if (meta_key) | |
799 { | |
579 | 800 tty.main.c_cflag |= CS8; /* allow 8th bit on input */ |
801 tty.main.c_cflag &= ~PARENB;/* Don't check parity */ | |
491 | 802 } |
803 #endif | |
579 | 804 tty.main.c_cc[VINTR] = quit_char; /* C-g (usually) gives SIGINT */ |
491 | 805 /* Set up C-g for both SIGQUIT and SIGINT. |
806 We don't know which we will get, but we handle both alike | |
807 so which one it really gives us does not matter. */ | |
579 | 808 tty.main.c_cc[VQUIT] = quit_char; |
809 tty.main.c_cc[VMIN] = 1; /* Input should wait for at least 1 char */ | |
810 tty.main.c_cc[VTIME] = 0; /* no matter how long that takes. */ | |
491 | 811 #ifdef VSWTCH |
1102
ff73961932eb
(init_sys_modes): Handle VDSUSP like V_DSUSP.
Richard M. Stallman <rms@gnu.org>
parents:
1048
diff
changeset
|
812 tty.main.c_cc[VSWTCH] = CDISABLE; /* Turn off shell layering use |
579 | 813 of C-z */ |
491 | 814 #endif /* VSWTCH */ |
815 #if defined (mips) || defined (HAVE_TCATTR) | |
816 #ifdef VSUSP | |
1102
ff73961932eb
(init_sys_modes): Handle VDSUSP like V_DSUSP.
Richard M. Stallman <rms@gnu.org>
parents:
1048
diff
changeset
|
817 tty.main.c_cc[VSUSP] = CDISABLE; /* Turn off mips handling of C-z. */ |
491 | 818 #endif /* VSUSP */ |
819 #ifdef V_DSUSP | |
1102
ff73961932eb
(init_sys_modes): Handle VDSUSP like V_DSUSP.
Richard M. Stallman <rms@gnu.org>
parents:
1048
diff
changeset
|
820 tty.main.c_cc[V_DSUSP] = CDISABLE; /* Turn off mips handling of C-y. */ |
491 | 821 #endif /* V_DSUSP */ |
1102
ff73961932eb
(init_sys_modes): Handle VDSUSP like V_DSUSP.
Richard M. Stallman <rms@gnu.org>
parents:
1048
diff
changeset
|
822 #ifdef VDSUSP /* Some systems have VDSUSP, some have V_DSUSP. */ |
ff73961932eb
(init_sys_modes): Handle VDSUSP like V_DSUSP.
Richard M. Stallman <rms@gnu.org>
parents:
1048
diff
changeset
|
823 tty.main.c_cc[VDSUSP] = CDISABLE; |
ff73961932eb
(init_sys_modes): Handle VDSUSP like V_DSUSP.
Richard M. Stallman <rms@gnu.org>
parents:
1048
diff
changeset
|
824 #endif /* VDSUSP */ |
491 | 825 #endif /* mips or HAVE_TCATTR */ |
826 #ifdef AIX | |
827 #ifndef IBMR2AIX | |
828 /* AIX enhanced edit loses NULs, so disable it */ | |
579 | 829 tty.main.c_line = 0; |
830 tty.main.c_iflag &= ~ASCEDIT; | |
491 | 831 #else |
579 | 832 tty.main.c_cc[VSTRT] = 255; |
833 tty.main.c_cc[VSTOP] = 255; | |
834 tty.main.c_cc[VSUSP] = 255; | |
835 tty.main.c_cc[VDSUSP] = 255; | |
491 | 836 #endif /* IBMR2AIX */ |
837 /* Also, PTY overloads NUL and BREAK. | |
838 don't ignore break, but don't signal either, so it looks like NUL. | |
839 This really serves a purpose only if running in an XTERM window | |
840 or via TELNET or the like, but does no harm elsewhere. */ | |
579 | 841 tty.main.c_iflag &= ~IGNBRK; |
842 tty.main.c_iflag &= ~BRKINT; | |
491 | 843 #endif |
844 #else /* if not HAVE_TERMIO */ | |
845 #ifdef VMS | |
579 | 846 tty.main.tt_char |= TT$M_NOECHO; |
491 | 847 if (meta_key) |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
848 tty.main.tt_char |= TT$M_EIGHTBIT; |
491 | 849 if (flow_control) |
579 | 850 tty.main.tt_char |= TT$M_TTSYNC; |
491 | 851 else |
579 | 852 tty.main.tt_char &= ~TT$M_TTSYNC; |
853 tty.main.tt2_char |= TT2$M_PASTHRU | TT2$M_XON; | |
491 | 854 #else /* not VMS (BSD, that is) */ |
579 | 855 tty.main.sg_flags &= ~(ECHO | CRMOD | XTABS); |
491 | 856 if (meta_key) |
579 | 857 tty.main.sg_flags |= ANYP; |
858 tty.main.sg_flags |= interrupt_input ? RAW : CBREAK; | |
491 | 859 #endif /* not VMS (BSD, that is) */ |
860 #endif /* not HAVE_TERMIO */ | |
861 | |
579 | 862 /* If going to use CBREAK mode, we must request C-g to interrupt |
863 and turn off start and stop chars, etc. If not going to use | |
864 CBREAK mode, do this anyway so as to turn off local flow | |
865 control for user coming over network on 4.2; in this case, | |
866 only t_stopc and t_startc really matter. */ | |
867 #ifndef HAVE_TERMIO | |
868 #ifdef TIOCGETC | |
869 /* Note: if not using CBREAK mode, it makes no difference how we | |
870 set this */ | |
871 tty.tchars = new_tchars; | |
872 tty.tchars.t_intrc = quit_char; | |
873 if (flow_control) | |
874 { | |
875 tty.tchars.t_startc = '\021'; | |
876 tty.tchars.t_stopc = '\023'; | |
877 } | |
878 | |
879 /* LPASS8 is new in 4.3, and makes cbreak mode provide all 8 bits. */ | |
880 #ifndef LPASS8 | |
881 #define LPASS8 0 | |
491 | 882 #endif |
579 | 883 |
884 #ifdef BSD4_1 | |
885 #define LNOFLSH 0100000 | |
886 #endif | |
887 | |
888 tty.lmode = LDECCTQ | LLITOUT | LPASS8 | LNOFLSH | old_tty.lmode; | |
889 | |
890 #ifdef BSD4_1 | |
891 lmode = tty.lmode; | |
892 #endif | |
893 | |
894 #endif /* TIOCGETC */ | |
895 #endif /* not HAVE_TERMIO */ | |
896 | |
897 #ifdef TIOCGLTC | |
898 tty.ltchars = new_ltchars; | |
899 #endif /* TIOCGLTC */ | |
900 | |
901 EMACS_SET_TTY (input_fd, &tty, 0); | |
491 | 902 |
903 /* This code added to insure that, if flow-control is not to be used, | |
766 | 904 we have an unlocked terminal at the start. */ |
579 | 905 |
491 | 906 #ifdef TCXONC |
907 if (!flow_control) ioctl (0, TCXONC, 1); | |
908 #endif | |
909 #ifndef APOLLO | |
910 #ifdef TIOCSTART | |
911 if (!flow_control) ioctl (0, TIOCSTART, 0); | |
912 #endif | |
913 #endif | |
914 | |
915 #ifdef AIX | |
916 hft_init (); | |
917 #ifdef IBMR2AIX | |
918 { | |
919 /* IBM's HFT device usually thinks a ^J should be LF/CR. We need it | |
920 to be only LF. This is the way that is done. */ | |
921 struct termio tty; | |
922 | |
923 if (ioctl (1, HFTGETID, &tty) != -1) | |
924 write (1, "\033[20l", 5); | |
925 } | |
926 #endif | |
927 #endif | |
928 | |
929 #ifdef VMS | |
930 /* Appears to do nothing when in PASTHRU mode. | |
579 | 931 SYS$QIOW (0, input_fd, IO$_SETMODE|IO$M_OUTBAND, 0, 0, 0, |
491 | 932 interrupt_signal, oob_chars, 0, 0, 0, 0); |
933 */ | |
934 queue_kbd_input (0); | |
935 #endif /* VMS */ | |
936 } | |
937 | |
938 #ifdef F_SETFL | |
939 #ifdef F_GETOWN /* F_SETFL does not imply existance of F_GETOWN */ | |
940 if (interrupt_input) | |
941 { | |
942 old_fcntl_owner = fcntl (0, F_GETOWN, 0); | |
943 fcntl (0, F_SETOWN, getpid ()); | |
944 init_sigio (); | |
945 } | |
946 #endif /* F_GETOWN */ | |
947 #endif /* F_SETFL */ | |
948 | |
949 #ifdef BSD4_1 | |
950 if (interrupt_input) | |
951 init_sigio (); | |
952 #endif | |
953 | |
954 #ifdef VMS /* VMS sometimes has this symbol but lacks setvbuf. */ | |
955 #undef _IOFBF | |
956 #endif | |
957 #ifdef _IOFBF | |
958 /* This symbol is defined on recent USG systems. | |
959 Someone says without this call USG won't really buffer the file | |
960 even with a call to setbuf. */ | |
961 setvbuf (stdout, _sobuf, _IOFBF, sizeof _sobuf); | |
962 #else | |
963 setbuf (stdout, _sobuf); | |
964 #endif | |
965 set_terminal_modes (); | |
966 if (term_initted && no_redraw_on_reenter) | |
967 { | |
968 if (display_completed) | |
969 direct_output_forward_char (0); | |
970 } | |
971 else | |
972 { | |
766 | 973 frame_garbaged = 1; |
974 #ifdef MULTI_FRAME | |
975 if (FRAMEP (Vterminal_frame)) | |
976 FRAME_GARBAGED_P (XFRAME (Vterminal_frame)) = 1; | |
491 | 977 #endif |
978 } | |
579 | 979 |
491 | 980 term_initted = 1; |
981 } | |
982 | |
983 /* Return nonzero if safe to use tabs in output. | |
984 At the time this is called, init_sys_modes has not been done yet. */ | |
985 | |
986 tabs_safe_p () | |
987 { | |
579 | 988 struct emacs_tty tty; |
989 | |
990 EMACS_GET_TTY (input_fd, &tty); | |
991 return EMACS_TTY_TABS_OK (&tty); | |
491 | 992 } |
993 | |
994 /* Get terminal size from system. | |
995 Store number of lines into *heightp and width into *widthp. | |
996 If zero or a negative number is stored, the value is not valid. */ | |
997 | |
766 | 998 get_frame_size (widthp, heightp) |
491 | 999 int *widthp, *heightp; |
1000 { | |
579 | 1001 |
1002 #ifdef TIOCGWINSZ | |
1003 | |
1004 /* BSD-style. */ | |
1005 struct winsize size; | |
1006 | |
1007 if (ioctl (input_fd, TIOCGWINSZ, &size) == -1) | |
1008 *widthp = *heightp = 0; | |
1009 else | |
1010 { | |
1011 *widthp = size.ws_col; | |
1012 *heightp = size.ws_row; | |
1013 } | |
1014 | |
1015 #else | |
491 | 1016 #ifdef TIOCGSIZE |
579 | 1017 |
1018 /* SunOS - style. */ | |
1019 struct ttysize size; | |
1020 | |
1021 if (ioctl (input_fd, TIOCGSIZE, &size) == -1) | |
1022 *widthp = *heightp = 0; | |
1023 else | |
1024 { | |
1025 *widthp = size.ts_cols; | |
1026 *heightp = size.ts_lines; | |
1027 } | |
1028 | |
1029 #else | |
491 | 1030 #ifdef VMS |
579 | 1031 |
1032 struct sensemode tty; | |
1033 | |
1034 SYS$QIOW (0, input_fd, IO$_SENSEMODE, &tty, 0, 0, | |
491 | 1035 &tty.class, 12, 0, 0, 0, 0); |
1036 *widthp = tty.scr_wid; | |
1037 *heightp = tty.scr_len; | |
579 | 1038 |
491 | 1039 #else /* system doesn't know size */ |
579 | 1040 |
491 | 1041 *widthp = 0; |
1042 *heightp = 0; | |
579 | 1043 |
1044 #endif /* not VMS */ | |
1045 #endif /* not SunOS-style */ | |
1046 #endif /* not BSD-style */ | |
491 | 1047 } |
579 | 1048 |
491 | 1049 |
579 | 1050 /* Prepare the terminal for exiting Emacs; move the cursor to the |
766 | 1051 bottom of the frame, turn off interrupt-driven I/O, etc. */ |
491 | 1052 reset_sys_modes () |
1053 { | |
1054 if (noninteractive) | |
1055 { | |
1056 fflush (stdout); | |
1057 return; | |
1058 } | |
1059 if (!term_initted) | |
1060 return; | |
1061 if (read_socket_hook || !EQ (Vwindow_system, Qnil)) | |
1062 return; | |
766 | 1063 cursor_to (FRAME_HEIGHT (selected_frame) - 1, 0); |
1064 clear_end_of_line (FRAME_WIDTH (selected_frame)); | |
491 | 1065 /* clear_end_of_line may move the cursor */ |
766 | 1066 cursor_to (FRAME_HEIGHT (selected_frame) - 1, 0); |
491 | 1067 #ifdef IBMR2AIX |
1068 { | |
1069 /* HFT devices normally use ^J as a LF/CR. We forced it to | |
1070 do the LF only. Now, we need to reset it. */ | |
1071 struct termio tty; | |
1072 | |
1073 if (ioctl (1, HFTGETID, &tty) != -1) | |
1074 write (1, "\033[20h", 5); | |
1075 } | |
1076 #endif | |
1077 | |
1078 reset_terminal_modes (); | |
1079 fflush (stdout); | |
1080 #ifdef BSD | |
1081 #ifndef BSD4_1 | |
1082 /* Avoid possible loss of output when changing terminal modes. */ | |
1083 fsync (fileno (stdout)); | |
1084 #endif | |
1085 #endif | |
579 | 1086 |
491 | 1087 #ifdef F_SETFL |
1088 #ifdef F_SETOWN /* F_SETFL does not imply existance of F_SETOWN */ | |
1089 if (interrupt_input) | |
1090 { | |
1091 reset_sigio (); | |
1092 fcntl (0, F_SETOWN, old_fcntl_owner); | |
1093 } | |
1094 #endif /* F_SETOWN */ | |
1095 #endif /* F_SETFL */ | |
1096 #ifdef BSD4_1 | |
1097 if (interrupt_input) | |
1098 reset_sigio (); | |
1099 #endif /* BSD4_1 */ | |
579 | 1100 |
1101 while (EMACS_SET_TTY (input_fd, &old_tty, 0) < 0 && errno == EINTR) | |
1102 ; | |
491 | 1103 |
1104 #ifdef AIX | |
1105 hft_reset (); | |
1106 #endif | |
1107 } | |
1108 | |
1109 #ifdef HAVE_PTYS | |
1110 | |
1111 /* Set up the proper status flags for use of a pty. */ | |
1112 | |
1113 setup_pty (fd) | |
1114 int fd; | |
1115 { | |
1116 /* I'm told that TOICREMOTE does not mean control chars | |
1117 "can't be sent" but rather that they don't have | |
1118 input-editing or signaling effects. | |
1119 That should be good, because we have other ways | |
1120 to do those things in Emacs. | |
1121 However, telnet mode seems not to work on 4.2. | |
1122 So TIOCREMOTE is turned off now. */ | |
1123 | |
1124 /* Under hp-ux, if TIOCREMOTE is turned on, some calls | |
1125 will hang. In particular, the "timeout" feature (which | |
1126 causes a read to return if there is no data available) | |
1127 does this. Also it is known that telnet mode will hang | |
1128 in such a way that Emacs must be stopped (perhaps this | |
1129 is the same problem). | |
1130 | |
1131 If TIOCREMOTE is turned off, then there is a bug in | |
1132 hp-ux which sometimes loses data. Apparently the | |
1133 code which blocks the master process when the internal | |
1134 buffer fills up does not work. Other than this, | |
1135 though, everything else seems to work fine. | |
1136 | |
1137 Since the latter lossage is more benign, we may as well | |
1138 lose that way. -- cph */ | |
1139 #ifdef FIONBIO | |
1140 #ifdef SYSV_PTYS | |
1141 { | |
1142 int on = 1; | |
1143 ioctl (fd, FIONBIO, &on); | |
1144 } | |
1145 #endif | |
1146 #endif | |
1147 #ifdef IBMRTAIX | |
1148 /* On AIX, the parent gets SIGHUP when a pty attached child dies. So, we */ | |
1149 /* ignore SIGHUP once we've started a child on a pty. Note that this may */ | |
1150 /* cause EMACS not to die when it should, i.e., when its own controlling */ | |
1151 /* tty goes away. I've complained to the AIX developers, and they may */ | |
1152 /* change this behavior, but I'm not going to hold my breath. */ | |
1153 signal (SIGHUP, SIG_IGN); | |
1154 #endif | |
1155 } | |
1156 #endif /* HAVE_PTYS */ | |
1157 | |
1158 #ifdef VMS | |
1159 | |
1160 /* Assigning an input channel is done at the start of Emacs execution. | |
1161 This is called each time Emacs is resumed, also, but does nothing | |
1162 because input_chain is no longer zero. */ | |
1163 | |
1164 init_vms_input () | |
1165 { | |
1166 int status; | |
1167 | |
579 | 1168 if (input_fd == 0) |
491 | 1169 { |
579 | 1170 status = SYS$ASSIGN (&input_dsc, &input_fd, 0, 0); |
491 | 1171 if (! (status & 1)) |
1172 LIB$STOP (status); | |
1173 } | |
1174 } | |
1175 | |
1176 /* Deassigning the input channel is done before exiting. */ | |
1177 | |
1178 stop_vms_input () | |
1179 { | |
579 | 1180 return SYS$DASSGN (input_fd); |
491 | 1181 } |
1182 | |
1183 short input_buffer; | |
1184 | |
1185 /* Request reading one character into the keyboard buffer. | |
1186 This is done as soon as the buffer becomes empty. */ | |
1187 | |
1188 queue_kbd_input () | |
1189 { | |
1190 int status; | |
1191 waiting_for_ast = 0; | |
1192 stop_input = 0; | |
579 | 1193 status = SYS$QIO (0, input_fd, IO$_READVBLK, |
491 | 1194 &input_iosb, kbd_input_ast, 1, |
1195 &input_buffer, 1, 0, terminator_mask, 0, 0); | |
1196 } | |
1197 | |
1198 int input_count; | |
1199 | |
1200 /* Ast routine that is called when keyboard input comes in | |
1201 in accord with the SYS$QIO above. */ | |
1202 | |
1203 kbd_input_ast () | |
1204 { | |
1205 register int c = -1; | |
1206 int old_errno = errno; | |
648 | 1207 extern EMACS_TIME *input_available_clear_time; |
491 | 1208 |
1209 if (waiting_for_ast) | |
1210 SYS$SETEF (input_ef); | |
1211 waiting_for_ast = 0; | |
1212 input_count++; | |
1213 #ifdef ASTDEBUG | |
1214 if (input_count == 25) | |
1215 exit (1); | |
1216 printf ("Ast # %d,", input_count); | |
1217 printf (" iosb = %x, %x, %x, %x", | |
1218 input_iosb.offset, input_iosb.status, input_iosb.termlen, | |
1219 input_iosb.term); | |
1220 #endif | |
1221 if (input_iosb.offset) | |
1222 { | |
1223 c = input_buffer; | |
1224 #ifdef ASTDEBUG | |
1225 printf (", char = 0%o", c); | |
1226 #endif | |
1227 } | |
1228 #ifdef ASTDEBUG | |
1229 printf ("\n"); | |
1230 fflush (stdout); | |
1231 sleep (1); | |
1232 #endif | |
1233 if (! stop_input) | |
1234 queue_kbd_input (); | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
1235 /* I don't know what this is doing! The variables buf, cbuf and i are |
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
1236 not declared. This is new from version 18, what does it do? |
491 | 1237 if (c >= 0) |
1238 { | |
1239 struct input_event e; | |
1240 e.kind = ascii_keystroke; | |
1241 XSET (buf[i].code, Lisp_Int, cbuf[i]); | |
766 | 1242 e.frame = selected_frame; |
491 | 1243 kbd_buffer_store_event (&e); |
1244 } | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
1245 */ |
648 | 1246 if (input_available_clear_time) |
1247 EMACS_SET_SECS_USECS (*input_available_clear_time, 0, 0); | |
491 | 1248 errno = old_errno; |
1249 } | |
1250 | |
1251 /* Wait until there is something in kbd_buffer. */ | |
1252 | |
1253 wait_for_kbd_input () | |
1254 { | |
1255 extern int have_process_input, process_exited; | |
1256 | |
1257 /* If already something, avoid doing system calls. */ | |
1258 if (detect_input_pending ()) | |
1259 { | |
1260 return; | |
1261 } | |
1262 /* Clear a flag, and tell ast routine above to set it. */ | |
1263 SYS$CLREF (input_ef); | |
1264 waiting_for_ast = 1; | |
1265 /* Check for timing error: ast happened while we were doing that. */ | |
1266 if (!detect_input_pending ()) | |
1267 { | |
1268 /* No timing error: wait for flag to be set. */ | |
1269 set_waiting_for_input (0); | |
1270 SYS$WFLOR (input_ef, input_eflist); | |
1271 clear_waiting_for_input (0); | |
1272 if (!detect_input_pending ()) | |
1273 /* Check for subprocess input availability */ | |
1274 { | |
1275 int dsp = have_process_input || process_exited; | |
1276 | |
1277 SYS$CLREF (process_ef); | |
1278 if (have_process_input) | |
1279 process_command_input (); | |
1280 if (process_exited) | |
1281 process_exit (); | |
1282 if (dsp) | |
1283 { | |
1284 update_mode_lines++; | |
1285 redisplay_preserve_echo_area (); | |
1286 } | |
1287 } | |
1288 } | |
1289 waiting_for_ast = 0; | |
1290 } | |
1291 | |
1292 /* Get rid of any pending QIO, when we are about to suspend | |
1293 or when we want to throw away pending input. | |
1294 We wait for a positive sign that the AST routine has run | |
1295 and therefore there is no I/O request queued when we return. | |
1296 SYS$SETAST is used to avoid a timing error. */ | |
1297 | |
1298 end_kbd_input () | |
1299 { | |
1300 #ifdef ASTDEBUG | |
1301 printf ("At end_kbd_input.\n"); | |
1302 fflush (stdout); | |
1303 sleep (1); | |
1304 #endif | |
1305 if (LIB$AST_IN_PROG ()) /* Don't wait if suspending from kbd_buffer_store_event! */ | |
1306 { | |
579 | 1307 SYS$CANCEL (input_fd); |
491 | 1308 return; |
1309 } | |
1310 | |
1311 SYS$SETAST (0); | |
1312 /* Clear a flag, and tell ast routine above to set it. */ | |
1313 SYS$CLREF (input_ef); | |
1314 waiting_for_ast = 1; | |
1315 stop_input = 1; | |
579 | 1316 SYS$CANCEL (input_fd); |
491 | 1317 SYS$SETAST (1); |
1318 SYS$WAITFR (input_ef); | |
1319 waiting_for_ast = 0; | |
1320 } | |
1321 | |
1322 /* Wait for either input available or time interval expiry. */ | |
1323 | |
1324 input_wait_timeout (timeval) | |
1325 int timeval; /* Time to wait, in seconds */ | |
1326 { | |
1327 int time [2]; | |
1328 static int zero = 0; | |
1329 static int large = -10000000; | |
1330 | |
1331 LIB$EMUL (&timeval, &large, &zero, time); /* Convert to VMS format */ | |
1332 | |
1333 /* If already something, avoid doing system calls. */ | |
1334 if (detect_input_pending ()) | |
1335 { | |
1336 return; | |
1337 } | |
1338 /* Clear a flag, and tell ast routine above to set it. */ | |
1339 SYS$CLREF (input_ef); | |
1340 waiting_for_ast = 1; | |
1341 /* Check for timing error: ast happened while we were doing that. */ | |
1342 if (!detect_input_pending ()) | |
1343 { | |
1344 /* No timing error: wait for flag to be set. */ | |
1345 SYS$CANTIM (1, 0); | |
1346 if (SYS$SETIMR (timer_ef, time, 0, 1) & 1) /* Set timer */ | |
1347 SYS$WFLOR (timer_ef, timer_eflist); /* Wait for timer expiry or input */ | |
1348 } | |
1349 waiting_for_ast = 0; | |
1350 } | |
1351 | |
1352 /* The standard `sleep' routine works some other way | |
1353 and it stops working if you have ever quit out of it. | |
1354 This one continues to work. */ | |
1355 | |
1356 sys_sleep (timeval) | |
1357 int timeval; | |
1358 { | |
1359 int time [2]; | |
1360 static int zero = 0; | |
1361 static int large = -10000000; | |
1362 | |
1363 LIB$EMUL (&timeval, &large, &zero, time); /* Convert to VMS format */ | |
1364 | |
1365 SYS$CANTIM (1, 0); | |
1366 if (SYS$SETIMR (timer_ef, time, 0, 1) & 1) /* Set timer */ | |
1367 SYS$WAITFR (timer_ef); /* Wait for timer expiry only */ | |
1368 } | |
1369 | |
1370 init_sigio () | |
1371 { | |
1372 request_sigio (); | |
1373 } | |
1374 | |
1375 reset_sigio () | |
1376 { | |
1377 unrequest_sigio (); | |
1378 } | |
1379 | |
1380 request_sigio () | |
1381 { | |
1382 croak ("request sigio"); | |
1383 } | |
1384 | |
1385 unrequest_sigio () | |
1386 { | |
1387 croak ("unrequest sigio"); | |
1388 } | |
1389 | |
1390 #endif /* VMS */ | |
1391 | |
1392 /* Note that VMS compiler won't accept defined (CANNOT_DUMP). */ | |
1393 #ifndef CANNOT_DUMP | |
1394 #define NEED_STARTS | |
1395 #endif | |
1396 | |
1397 #ifndef SYSTEM_MALLOC | |
1398 #ifndef NEED_STARTS | |
1399 #define NEED_STARTS | |
1400 #endif | |
1401 #endif | |
1402 | |
1403 #ifdef NEED_STARTS | |
1404 /* Some systems that cannot dump also cannot implement these. */ | |
1405 | |
1406 /* | |
1407 * Return the address of the start of the text segment prior to | |
1408 * doing an unexec. After unexec the return value is undefined. | |
1409 * See crt0.c for further explanation and _start. | |
1410 * | |
1411 */ | |
1412 | |
1413 #ifndef CANNOT_UNEXEC | |
1414 char * | |
1415 start_of_text () | |
1416 { | |
1417 #ifdef TEXT_START | |
1418 return ((char *) TEXT_START); | |
1419 #else | |
1420 #ifdef GOULD | |
1421 extern csrt (); | |
1422 return ((char *) csrt); | |
1423 #else /* not GOULD */ | |
1424 extern int _start (); | |
1425 return ((char *) _start); | |
1426 #endif /* GOULD */ | |
1427 #endif /* TEXT_START */ | |
1428 } | |
1429 #endif /* not CANNOT_UNEXEC */ | |
1430 | |
1431 /* | |
1432 * Return the address of the start of the data segment prior to | |
1433 * doing an unexec. After unexec the return value is undefined. | |
1434 * See crt0.c for further information and definition of data_start. | |
1435 * | |
1436 * Apparently, on BSD systems this is etext at startup. On | |
1437 * USG systems (swapping) this is highly mmu dependent and | |
1438 * is also dependent on whether or not the program is running | |
1439 * with shared text. Generally there is a (possibly large) | |
1440 * gap between end of text and start of data with shared text. | |
1441 * | |
1442 * On Uniplus+ systems with shared text, data starts at a | |
1443 * fixed address. Each port (from a given oem) is generally | |
1444 * different, and the specific value of the start of data can | |
1445 * be obtained via the UniPlus+ specific "uvar" system call, | |
1446 * however the method outlined in crt0.c seems to be more portable. | |
1447 * | |
1448 * Probably what will have to happen when a USG unexec is available, | |
1449 * at least on UniPlus, is temacs will have to be made unshared so | |
1450 * that text and data are contiguous. Then once loadup is complete, | |
1451 * unexec will produce a shared executable where the data can be | |
1452 * at the normal shared text boundry and the startofdata variable | |
1453 * will be patched by unexec to the correct value. | |
1454 * | |
1455 */ | |
1456 | |
1457 char * | |
1458 start_of_data () | |
1459 { | |
1460 #ifdef DATA_START | |
1461 return ((char *) DATA_START); | |
1462 #else | |
1463 extern int data_start; | |
1464 return ((char *) &data_start); | |
1465 #endif | |
1466 } | |
1467 #endif /* NEED_STARTS (not CANNOT_DUMP or not SYSTEM_MALLOC) */ | |
1468 | |
1469 #ifndef CANNOT_DUMP | |
1470 /* Some systems that cannot dump also cannot implement these. */ | |
1471 | |
1472 /* | |
1473 * Return the address of the end of the text segment prior to | |
1474 * doing an unexec. After unexec the return value is undefined. | |
1475 */ | |
1476 | |
1477 char * | |
1478 end_of_text () | |
1479 { | |
1480 #ifdef TEXT_END | |
1481 return ((char *) TEXT_END); | |
1482 #else | |
1483 extern int etext; | |
1484 return ((char *) &etext); | |
1485 #endif | |
1486 } | |
1487 | |
1488 /* | |
1489 * Return the address of the end of the data segment prior to | |
1490 * doing an unexec. After unexec the return value is undefined. | |
1491 */ | |
1492 | |
1493 char * | |
1494 end_of_data () | |
1495 { | |
1496 #ifdef DATA_END | |
1497 return ((char *) DATA_END); | |
1498 #else | |
1499 extern int edata; | |
1500 return ((char *) &edata); | |
1501 #endif | |
1502 } | |
1503 | |
1504 #endif /* not CANNOT_DUMP */ | |
1505 | |
1506 /* Get_system_name returns as its value | |
1507 a string for the Lisp function system-name to return. */ | |
1508 | |
1509 #ifdef BSD4_1 | |
1510 #include <whoami.h> | |
1511 #endif | |
1512 | |
1496
f9010847a5f5
(get_system_name): Use gethostname for USG systems
Richard M. Stallman <rms@gnu.org>
parents:
1203
diff
changeset
|
1513 /* Can't have this within the function since `static' is #defined to |
f9010847a5f5
(get_system_name): Use gethostname for USG systems
Richard M. Stallman <rms@gnu.org>
parents:
1203
diff
changeset
|
1514 nothing for some USG systems. */ |
491 | 1515 #ifdef USG |
1496
f9010847a5f5
(get_system_name): Use gethostname for USG systems
Richard M. Stallman <rms@gnu.org>
parents:
1203
diff
changeset
|
1516 #ifdef HAVE_GETHOSTNAME |
f9010847a5f5
(get_system_name): Use gethostname for USG systems
Richard M. Stallman <rms@gnu.org>
parents:
1203
diff
changeset
|
1517 static char get_system_name_name[256]; |
f9010847a5f5
(get_system_name): Use gethostname for USG systems
Richard M. Stallman <rms@gnu.org>
parents:
1203
diff
changeset
|
1518 #else /* not HAVE_GETHOSTNAME */ |
491 | 1519 static struct utsname get_system_name_name; |
1496
f9010847a5f5
(get_system_name): Use gethostname for USG systems
Richard M. Stallman <rms@gnu.org>
parents:
1203
diff
changeset
|
1520 #endif /* not HAVE_GETHOSTNAME */ |
f9010847a5f5
(get_system_name): Use gethostname for USG systems
Richard M. Stallman <rms@gnu.org>
parents:
1203
diff
changeset
|
1521 #endif /* USG */ |
491 | 1522 |
1523 char * | |
1524 get_system_name () | |
1525 { | |
1526 #ifdef USG | |
1496
f9010847a5f5
(get_system_name): Use gethostname for USG systems
Richard M. Stallman <rms@gnu.org>
parents:
1203
diff
changeset
|
1527 #ifdef HAVE_GETHOSTNAME |
f9010847a5f5
(get_system_name): Use gethostname for USG systems
Richard M. Stallman <rms@gnu.org>
parents:
1203
diff
changeset
|
1528 gethostname (get_system_name_name, sizeof (get_system_name_name)); |
f9010847a5f5
(get_system_name): Use gethostname for USG systems
Richard M. Stallman <rms@gnu.org>
parents:
1203
diff
changeset
|
1529 return get_system_name_name; |
f9010847a5f5
(get_system_name): Use gethostname for USG systems
Richard M. Stallman <rms@gnu.org>
parents:
1203
diff
changeset
|
1530 #else /* not HAVE_GETHOSTNAME */ |
491 | 1531 uname (&get_system_name_name); |
1532 return (get_system_name_name.nodename); | |
1496
f9010847a5f5
(get_system_name): Use gethostname for USG systems
Richard M. Stallman <rms@gnu.org>
parents:
1203
diff
changeset
|
1533 #endif /* not HAVE_GETHOSTNAME */ |
491 | 1534 #else /* Not USG */ |
1535 #ifdef BSD4_1 | |
1536 return sysname; | |
1537 #else /* not USG, not 4.1 */ | |
1538 static char system_name_saved[32]; | |
1539 #ifdef VMS | |
1540 char *sp; | |
1541 if ((sp = egetenv ("SYS$NODE")) == 0) | |
1542 sp = "vax-vms"; | |
1543 else | |
1544 { | |
1545 char *end; | |
1546 | |
1547 if ((end = index (sp, ':')) != 0) | |
1548 *end = '\0'; | |
1549 } | |
1550 strcpy (system_name_saved, sp); | |
1551 #else /* not VMS */ | |
1552 gethostname (system_name_saved, sizeof (system_name_saved)); | |
1553 #endif /* not VMS */ | |
1554 return system_name_saved; | |
1555 #endif /* not USG, not 4.1 */ | |
1556 #endif /* not USG */ | |
1557 } | |
1558 | |
1559 #ifndef VMS | |
1560 #ifndef HAVE_SELECT | |
1561 | |
1562 #ifdef HAVE_X_WINDOWS | |
1563 /* Cause explanatory error message at compile time, | |
1564 since the select emulation is not good enough for X. */ | |
1565 int *x = &x_windows_lose_if_no_select_system_call; | |
1566 #endif | |
1567 | |
1568 /* Emulate as much as select as is possible under 4.1 and needed by Gnu Emacs | |
1569 * Only checks read descriptors. | |
1570 */ | |
1571 /* How long to wait between checking fds in select */ | |
1572 #define SELECT_PAUSE 1 | |
1573 int select_alarmed; | |
1574 | |
1575 /* For longjmp'ing back to read_input_waiting. */ | |
1576 | |
1577 jmp_buf read_alarm_throw; | |
1578 | |
1579 /* Nonzero if the alarm signal should throw back to read_input_waiting. | |
1580 The read_socket_hook function sets this to 1 while it is waiting. */ | |
1581 | |
1582 int read_alarm_should_throw; | |
1583 | |
1584 SIGTYPE | |
1585 select_alarm () | |
1586 { | |
1587 select_alarmed = 1; | |
1588 #ifdef BSD4_1 | |
1589 sigrelse (SIGALRM); | |
1590 #else /* not BSD4_1 */ | |
1591 signal (SIGALRM, SIG_IGN); | |
1592 #endif /* not BSD4_1 */ | |
1593 if (read_alarm_should_throw) | |
1594 longjmp (read_alarm_throw, 1); | |
1595 } | |
1596 | |
1597 /* Only rfds are checked. */ | |
1598 int | |
1599 select (nfds, rfds, wfds, efds, timeout) | |
1600 int nfds; | |
1601 int *rfds, *wfds, *efds, *timeout; | |
1602 { | |
1603 int ravail = 0, orfds = 0, old_alarm; | |
1604 int timeoutval = timeout ? *timeout : 100000; | |
1605 int *local_timeout = &timeoutval; | |
1606 extern int proc_buffered_char[]; | |
1607 #ifndef subprocesses | |
1608 int process_tick = 0, update_tick = 0; | |
1609 #else | |
1610 extern int process_tick, update_tick; | |
1611 #endif | |
1612 SIGTYPE (*old_trap) (); | |
1613 unsigned char buf; | |
1614 | |
1615 if (rfds) | |
1616 { | |
1617 orfds = *rfds; | |
1618 *rfds = 0; | |
1619 } | |
1620 if (wfds) | |
1621 *wfds = 0; | |
1622 if (efds) | |
1623 *efds = 0; | |
1624 | |
1625 /* If we are looking only for the terminal, with no timeout, | |
1626 just read it and wait -- that's more efficient. */ | |
1627 if (orfds == 1 && *local_timeout == 100000 && process_tick == update_tick) | |
1628 { | |
1629 if (! detect_input_pending ()) | |
1630 read_input_waiting (); | |
1631 *rfds = 1; | |
1632 return 1; | |
1633 } | |
1634 | |
1635 /* Once a second, till the timer expires, check all the flagged read | |
1636 * descriptors to see if any input is available. If there is some then | |
1637 * set the corresponding bit in the return copy of rfds. | |
1638 */ | |
1639 while (1) | |
1640 { | |
1641 register int to_check, bit, fd; | |
1642 | |
1643 if (rfds) | |
1644 { | |
1645 for (to_check = nfds, bit = 1, fd = 0; --to_check >= 0; bit <<= 1, fd++) | |
1646 { | |
1647 if (orfds & bit) | |
1648 { | |
1649 int avail = 0, status = 0; | |
1650 | |
1651 if (bit == 1) | |
1652 avail = detect_input_pending (); /* Special keyboard handler */ | |
1653 else | |
1654 { | |
1655 #ifdef FIONREAD | |
1656 status = ioctl (fd, FIONREAD, &avail); | |
1657 #else /* no FIONREAD */ | |
1658 /* Hoping it will return -1 if nothing available | |
1659 or 0 if all 0 chars requested are read. */ | |
1660 if (proc_buffered_char[fd] >= 0) | |
1661 avail = 1; | |
1662 else | |
1663 { | |
1664 avail = read (fd, &buf, 1); | |
1665 if (avail > 0) | |
1666 proc_buffered_char[fd] = buf; | |
1667 } | |
1668 #endif /* no FIONREAD */ | |
1669 } | |
1670 if (status >= 0 && avail > 0) | |
1671 { | |
1672 (*rfds) |= bit; | |
1673 ravail++; | |
1674 } | |
1675 } | |
1676 } | |
1677 } | |
1678 if (*local_timeout == 0 || ravail != 0 || process_tick != update_tick) | |
1679 break; | |
1680 old_alarm = alarm (0); | |
1014
6e25f9b75841
* sysdep.c (select): There's no need to cast the return value of
Jim Blandy <jimb@redhat.com>
parents:
766
diff
changeset
|
1681 old_trap = signal (SIGALRM, select_alarm); |
491 | 1682 select_alarmed = 0; |
1683 alarm (SELECT_PAUSE); | |
1684 /* Wait for a SIGALRM (or maybe a SIGTINT) */ | |
1685 while (select_alarmed == 0 && *local_timeout != 0 | |
1686 && process_tick == update_tick) | |
1687 { | |
1688 /* If we are interested in terminal input, | |
1689 wait by reading the terminal. | |
1690 That makes instant wakeup for terminal input at least. */ | |
1691 if (orfds & 1) | |
1692 { | |
1693 read_input_waiting (); | |
1694 if (detect_input_pending ()) | |
1695 select_alarmed = 1; | |
1696 } | |
1697 else | |
1698 pause (); | |
1699 } | |
1700 (*local_timeout) -= SELECT_PAUSE; | |
1701 /* Reset the old alarm if there was one */ | |
1702 alarm (0); | |
1703 signal (SIGALRM, old_trap); | |
1704 if (old_alarm != 0) | |
1705 { | |
1706 /* Reset or forge an interrupt for the original handler. */ | |
1707 old_alarm -= SELECT_PAUSE; | |
1708 if (old_alarm <= 0) | |
1709 kill (getpid (), SIGALRM); /* Fake an alarm with the orig' handler */ | |
1710 else | |
1711 alarm (old_alarm); | |
1712 } | |
1713 if (*local_timeout == 0) /* Stop on timer being cleared */ | |
1714 break; | |
1715 } | |
1716 return ravail; | |
1717 } | |
1718 | |
1719 /* Read keyboard input into the standard buffer, | |
1720 waiting for at least one character. */ | |
1721 | |
1722 /* Make all keyboard buffers much bigger when using X windows. */ | |
1723 #ifdef HAVE_X_WINDOWS | |
1724 #define BUFFER_SIZE_FACTOR 16 | |
1725 #else | |
1726 #define BUFFER_SIZE_FACTOR 1 | |
1727 #endif | |
1728 | |
1729 read_input_waiting () | |
1730 { | |
1731 char buf[256 * BUFFER_SIZE_FACTOR]; | |
1732 struct input_event e; | |
1014
6e25f9b75841
* sysdep.c (select): There's no need to cast the return value of
Jim Blandy <jimb@redhat.com>
parents:
766
diff
changeset
|
1733 int nread, i; |
6e25f9b75841
* sysdep.c (select): There's no need to cast the return value of
Jim Blandy <jimb@redhat.com>
parents:
766
diff
changeset
|
1734 extern int quit_char; |
491 | 1735 |
1736 if (read_socket_hook) | |
1737 { | |
1738 read_alarm_should_throw = 0; | |
1739 if (! setjmp (read_alarm_throw)) | |
1740 nread = (*read_socket_hook) (0, buf, 256 * BUFFER_SIZE_FACTOR, 1, 0); | |
1741 else | |
1742 nread = -1; | |
1743 } | |
1744 else | |
1745 nread = read (fileno (stdin), buf, 1); | |
1746 | |
1747 /* Scan the chars for C-g and store them in kbd_buffer. */ | |
1748 e.kind = ascii_keystroke; | |
766 | 1749 e.frame = selected_frame; |
491 | 1750 for (i = 0; i < nread; i++) |
1751 { | |
1752 XSET (e.code, Lisp_Int, buf[i]); | |
1753 kbd_buffer_store_event (&e); | |
1754 /* Don't look at input that follows a C-g too closely. | |
1755 This reduces lossage due to autorepeat on C-g. */ | |
1014
6e25f9b75841
* sysdep.c (select): There's no need to cast the return value of
Jim Blandy <jimb@redhat.com>
parents:
766
diff
changeset
|
1756 if (buf[i] == quit_char) |
491 | 1757 break; |
1758 } | |
1759 } | |
1760 | |
1761 #endif /* not HAVE_SELECT */ | |
1762 #endif /* not VMS */ | |
1763 | |
1764 #ifdef BSD4_1 | |
1765 /* | |
1766 * Partially emulate 4.2 open call. | |
1767 * open is defined as this in 4.1. | |
1768 * | |
1769 * - added by Michael Bloom @ Citicorp/TTI | |
1770 * | |
1771 */ | |
1772 | |
1773 int | |
1774 sys_open (path, oflag, mode) | |
1775 char *path; | |
1776 int oflag, mode; | |
1777 { | |
1778 if (oflag & O_CREAT) | |
1779 return creat (path, mode); | |
1780 else | |
1781 return open (path, oflag); | |
1782 } | |
1783 | |
1784 init_sigio () | |
1785 { | |
1786 if (noninteractive) | |
1787 return; | |
1788 lmode = LINTRUP | lmode; | |
1789 ioctl (0, TIOCLSET, &lmode); | |
1790 } | |
1791 | |
1792 reset_sigio () | |
1793 { | |
1794 if (noninteractive) | |
1795 return; | |
1796 lmode = ~LINTRUP & lmode; | |
1797 ioctl (0, TIOCLSET, &lmode); | |
1798 } | |
1799 | |
1800 request_sigio () | |
1801 { | |
1802 sigrelse (SIGTINT); | |
1803 | |
1804 interrupts_deferred = 0; | |
1805 } | |
1806 | |
1807 unrequest_sigio () | |
1808 { | |
1809 sighold (SIGTINT); | |
1810 | |
1811 interrupts_deferred = 1; | |
1812 } | |
1813 | |
1814 /* still inside #ifdef BSD4_1 */ | |
1815 #ifdef subprocesses | |
1816 | |
1817 int sigheld; /* Mask of held signals */ | |
1818 | |
1819 sigholdx (signum) | |
1820 int signum; | |
1821 { | |
1822 sigheld |= sigbit (signum); | |
1823 sighold (signum); | |
1824 } | |
1825 | |
1826 sigisheld (signum) | |
1827 int signum; | |
1828 { | |
1829 sigheld |= sigbit (signum); | |
1830 } | |
1831 | |
1832 sigunhold (signum) | |
1833 int signum; | |
1834 { | |
1835 sigheld &= ~sigbit (signum); | |
1836 sigrelse (signum); | |
1837 } | |
1838 | |
1839 sigfree () /* Free all held signals */ | |
1840 { | |
1841 int i; | |
1842 for (i = 0; i < NSIG; i++) | |
1843 if (sigheld & sigbit (i)) | |
1844 sigrelse (i); | |
1845 sigheld = 0; | |
1846 } | |
1847 | |
1848 sigbit (i) | |
1849 { | |
1850 return 1 << (i - 1); | |
1851 } | |
1852 #endif /* subprocesses */ | |
1853 #endif /* BSD4_1 */ | |
1854 | |
1855 /* POSIX signals support - DJB */ | |
1856 /* Anyone with POSIX signals should have ANSI C declarations */ | |
1857 | |
1858 #ifdef POSIX_SIGNALS | |
1859 | |
1860 sigset_t old_mask, empty_mask, full_mask, temp_mask; | |
1861 static struct sigaction new_action, old_action; | |
1862 | |
1863 init_signals () | |
1864 { | |
1865 #ifdef POSIX_SIGNALS | |
1866 sigemptyset (&signal_empty_mask); | |
1867 sigfillset (&signal_full_mask); | |
1868 #endif | |
1869 } | |
1870 | |
1871 int (*signal_handler_t) (); | |
1872 | |
1873 signal_handler_t | |
1874 sys_signal (int signal_number, signal_handler_t action) | |
1875 { | |
1876 #ifdef DGUX | |
1877 /* This gets us restartable system calls for efficiency. | |
1878 The "else" code will works as well. */ | |
1879 return (berk_signal (signal_number, action)); | |
1880 #else | |
1881 sigemptyset (&new_action.sa_mask); | |
1882 new_action.sa_handler = action; | |
1883 new_action.sa_flags = NULL; | |
709 | 1884 sigaction (signal_number, &new_action, &old_action); |
491 | 1885 return (old_action.sa_handler); |
1886 #endif /* DGUX */ | |
1887 } | |
1888 | |
638 | 1889 #ifndef __GNUC__ |
1890 /* If we're compiling with GCC, we don't need this function, since it | |
1891 can be written as a macro. */ | |
1892 sigset_t | |
1893 sys_sigmask (int sig) | |
1894 { | |
1895 sigset_t mask; | |
1896 sigemptyset (&mask); | |
1897 sigaddset (&mask, sig); | |
1898 return mask; | |
1899 } | |
1900 #endif | |
1901 | |
491 | 1902 int |
1903 sys_sigpause (sigset_t new_mask) | |
1904 { | |
1905 /* pause emulating berk sigpause... */ | |
1906 sigsuspend (&new_mask); | |
1907 return (EINTR); | |
1908 } | |
1909 | |
1910 /* I'd like to have these guys return pointers to the mask storage in here, | |
1911 but there'd be trouble if the code was saving multiple masks. I'll be | |
1912 safe and pass the structure. It normally won't be more than 2 bytes | |
1913 anyhow. - DJB */ | |
1914 | |
1915 sigset_t | |
1916 sys_sigblock (sigset_t new_mask) | |
1917 { | |
1918 sigset_t old_mask; | |
1919 sigprocmask (SIG_BLOCK, &new_mask, &old_mask); | |
1920 return (old_mask); | |
1921 } | |
1922 | |
1923 sigset_t | |
1924 sys_sigunblock (sigset_t new_mask) | |
1925 { | |
1926 sigset_t old_mask; | |
1927 sigprocmask (SIG_UNBLOCK, &new_mask, &old_mask); | |
1928 return (old_mask); | |
1929 } | |
1930 | |
1931 sigset_t | |
1932 sys_sigsetmask (sigset_t new_mask) | |
1933 { | |
1934 sigset_t old_mask; | |
1935 sigprocmask (SIG_SETMASK, &new_mask, &old_mask); | |
1936 return (old_mask); | |
1937 } | |
1938 | |
1939 #endif /* POSIX_SIGNALS */ | |
1940 | |
1941 #ifndef BSTRING | |
1942 | |
1943 void | |
1944 bzero (b, length) | |
1945 register char *b; | |
1946 register int length; | |
1947 { | |
1948 #ifdef VMS | |
1949 short zero = 0; | |
1950 long max_str = 65535; | |
1951 | |
1952 while (length > max_str) { | |
1953 (void) LIB$MOVC5 (&zero, &zero, &zero, &max_str, b); | |
1954 length -= max_str; | |
1955 b += max_str; | |
1956 } | |
1957 max_str = length; | |
1958 (void) LIB$MOVC5 (&zero, &zero, &zero, &max_str, b); | |
1959 #else | |
1960 while (length-- > 0) | |
1961 *b++ = 0; | |
1962 #endif /* not VMS */ | |
1963 } | |
1964 | |
1965 /* Saying `void' requires a declaration, above, where bcopy is used | |
1966 and that declaration causes pain for systems where bcopy is a macro. */ | |
1967 bcopy (b1, b2, length) | |
1968 register char *b1; | |
1969 register char *b2; | |
1970 register int length; | |
1971 { | |
1972 #ifdef VMS | |
1973 long max_str = 65535; | |
1974 | |
1975 while (length > max_str) { | |
1976 (void) LIB$MOVC3 (&max_str, b1, b2); | |
1977 length -= max_str; | |
1978 b1 += max_str; | |
1979 b2 += max_str; | |
1980 } | |
1981 max_str = length; | |
1982 (void) LIB$MOVC3 (&length, b1, b2); | |
1983 #else | |
1984 while (length-- > 0) | |
1985 *b2++ = *b1++; | |
1986 #endif /* not VMS */ | |
1987 } | |
1988 | |
1989 int | |
1990 bcmp (b1, b2, length) /* This could be a macro! */ | |
1991 register char *b1; | |
1992 register char *b2; | |
1993 register int length; | |
1994 { | |
1995 #ifdef VMS | |
1996 struct dsc$descriptor_s src1 = {length, DSC$K_DTYPE_T, DSC$K_CLASS_S, b1}; | |
1997 struct dsc$descriptor_s src2 = {length, DSC$K_DTYPE_T, DSC$K_CLASS_S, b2}; | |
1998 | |
1999 return STR$COMPARE (&src1, &src2); | |
2000 #else | |
2001 while (length-- > 0) | |
2002 if (*b1++ != *b2++) | |
2003 return 1; | |
2004 | |
2005 return 0; | |
2006 #endif /* not VMS */ | |
2007 } | |
2008 #endif /* not BSTRING */ | |
2009 | |
2010 #ifdef USG | |
2011 /* | |
2012 * The BSD random returns numbers in the range of | |
2013 * 0 to 2e31 - 1. The USG rand returns numbers in the | |
2014 * range of 0 to 2e15 - 1. This is probably not significant | |
2015 * in this usage. | |
2016 */ | |
2017 | |
2018 long | |
2019 random () | |
2020 { | |
2021 /* Arrange to return a range centered on zero. */ | |
2022 return (rand () << 15) + rand () - (1 << 29); | |
2023 } | |
2024 | |
2025 srandom (arg) | |
2026 int arg; | |
2027 { | |
2028 srand (arg); | |
2029 } | |
2030 | |
2031 #endif /* USG */ | |
2032 | |
2033 #ifdef BSD4_1 | |
2034 long random () | |
2035 { | |
2036 /* Arrange to return a range centered on zero. */ | |
2037 return (rand () << 15) + rand () - (1 << 29); | |
2038 } | |
2039 | |
2040 srandom (arg) | |
2041 int arg; | |
2042 { | |
2043 srand (arg); | |
2044 } | |
2045 #endif /* BSD4_1 */ | |
2046 | |
2047 #ifdef WRONG_NAME_INSQUE | |
2048 | |
2049 insque (q,p) | |
2050 caddr_t q,p; | |
2051 { | |
2052 _insque (q,p); | |
2053 } | |
2054 | |
2055 #endif | |
2056 | |
2057 #ifdef VMS | |
2058 | |
2059 #ifdef getenv | |
2060 /* If any place else asks for the TERM variable, | |
2061 allow it to be overridden with the EMACS_TERM variable | |
2062 before attempting to translate the logical name TERM. As a last | |
2063 resort, ask for VAX C's special idea of the TERM variable. */ | |
2064 #undef getenv | |
2065 char * | |
2066 sys_getenv (name) | |
2067 char *name; | |
2068 { | |
2069 register char *val; | |
2070 static char buf[256]; | |
2071 static struct dsc$descriptor_s equiv | |
2072 = {sizeof (buf), DSC$K_DTYPE_T, DSC$K_CLASS_S, buf}; | |
2073 static struct dsc$descriptor_s d_name | |
2074 = {0, DSC$K_DTYPE_T, DSC$K_CLASS_S, 0}; | |
2075 short eqlen; | |
2076 | |
2077 if (!strcmp (name, "TERM")) | |
2078 { | |
2079 val = (char *) getenv ("EMACS_TERM"); | |
2080 if (val) | |
2081 return val; | |
2082 } | |
2083 | |
2084 d_name.dsc$w_length = strlen (name); | |
2085 d_name.dsc$a_pointer = name; | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
2086 if (LIB$SYS_TRNLOG (&d_name, &eqlen, &equiv) == 1) |
491 | 2087 { |
2088 char *str = (char *) xmalloc (eqlen + 1); | |
2089 bcopy (buf, str, eqlen); | |
2090 str[eqlen] = '\0'; | |
2091 /* This is a storage leak, but a pain to fix. With luck, | |
2092 no one will ever notice. */ | |
2093 return str; | |
2094 } | |
2095 return (char *) getenv (name); | |
2096 } | |
2097 #endif /* getenv */ | |
2098 | |
2099 #ifdef abort | |
2100 /* Since VMS doesn't believe in core dumps, the only way to debug this beast is | |
2101 to force a call on the debugger from within the image. */ | |
2102 #undef abort | |
2103 sys_abort () | |
2104 { | |
2105 reset_sys_modes (); | |
2106 LIB$SIGNAL (SS$_DEBUG); | |
2107 } | |
2108 #endif /* abort */ | |
2109 #endif /* VMS */ | |
2110 | |
2111 #ifdef VMS | |
2112 #ifdef LINK_CRTL_SHARE | |
2113 #ifdef SHAREABLE_LIB_BUG | |
2114 /* Variables declared noshare and initialized in shareable libraries | |
2115 cannot be shared. The VMS linker incorrectly forces you to use a private | |
2116 version which is uninitialized... If not for this "feature", we | |
2117 could use the C library definition of sys_nerr and sys_errlist. */ | |
2118 int sys_nerr = 35; | |
2119 char *sys_errlist[] = | |
2120 { | |
2121 "error 0", | |
2122 "not owner", | |
2123 "no such file or directory", | |
2124 "no such process", | |
2125 "interrupted system call", | |
2126 "i/o error", | |
2127 "no such device or address", | |
2128 "argument list too long", | |
2129 "exec format error", | |
2130 "bad file number", | |
2131 "no child process", | |
2132 "no more processes", | |
2133 "not enough memory", | |
2134 "permission denied", | |
2135 "bad address", | |
2136 "block device required", | |
2137 "mount devices busy", | |
2138 "file exists", | |
2139 "cross-device link", | |
2140 "no such device", | |
2141 "not a directory", | |
2142 "is a directory", | |
2143 "invalid argument", | |
2144 "file table overflow", | |
2145 "too many open files", | |
2146 "not a typewriter", | |
2147 "text file busy", | |
2148 "file too big", | |
2149 "no space left on device", | |
2150 "illegal seek", | |
2151 "read-only file system", | |
2152 "too many links", | |
2153 "broken pipe", | |
2154 "math argument", | |
2155 "result too large", | |
2156 "I/O stream empty", | |
2157 "vax/vms specific error code nontranslatable error" | |
2158 }; | |
2159 #endif /* SHAREABLE_LIB_BUG */ | |
2160 #endif /* LINK_CRTL_SHARE */ | |
2161 #endif /* VMS */ | |
2162 | |
2163 #ifdef INTERRUPTIBLE_OPEN | |
2164 | |
2165 int | |
2166 /* VARARGS 2 */ | |
2167 sys_open (path, oflag, mode) | |
2168 char *path; | |
2169 int oflag, mode; | |
2170 { | |
2171 register int rtnval; | |
2172 | |
2173 while ((rtnval = open (path, oflag, mode)) == -1 | |
2174 && (errno == EINTR)); | |
2175 return (rtnval); | |
2176 } | |
2177 | |
2178 #endif /* INTERRUPTIBLE_OPEN */ | |
2179 | |
2180 #ifdef INTERRUPTIBLE_CLOSE | |
2181 | |
2182 sys_close (fd) | |
2183 int fd; | |
2184 { | |
2185 register int rtnval; | |
2186 | |
2187 while ((rtnval = close (fd)) == -1 | |
2188 && (errno == EINTR)); | |
2189 return rtnval; | |
2190 } | |
2191 | |
2192 #endif /* INTERRUPTIBLE_CLOSE */ | |
2193 | |
2194 #ifdef INTERRUPTIBLE_IO | |
2195 | |
2196 int | |
2197 sys_read (fildes, buf, nbyte) | |
2198 int fildes; | |
2199 char *buf; | |
2200 unsigned int nbyte; | |
2201 { | |
2202 register int rtnval; | |
2203 | |
2204 while ((rtnval = read (fildes, buf, nbyte)) == -1 | |
2205 && (errno == EINTR)); | |
2206 return (rtnval); | |
2207 } | |
2208 | |
2209 int | |
2210 sys_write (fildes, buf, nbyte) | |
2211 int fildes; | |
2212 char *buf; | |
2213 unsigned int nbyte; | |
2214 { | |
2215 register int rtnval; | |
2216 | |
2217 while ((rtnval = write (fildes, buf, nbyte)) == -1 | |
2218 && (errno == EINTR)); | |
2219 return (rtnval); | |
2220 } | |
2221 | |
2222 #endif /* INTERRUPTIBLE_IO */ | |
2223 | |
2224 #ifdef USG | |
2225 /* | |
2226 * All of the following are for USG. | |
2227 * | |
2228 * On USG systems the system calls are INTERRUPTIBLE by signals | |
2229 * that the user program has elected to catch. Thus the system call | |
2230 * must be retried in these cases. To handle this without massive | |
2231 * changes in the source code, we remap the standard system call names | |
2232 * to names for our own functions in sysdep.c that do the system call | |
2233 * with retries. Actually, for portability reasons, it is good | |
2234 * programming practice, as this example shows, to limit all actual | |
2235 * system calls to a single occurance in the source. Sure, this | |
2236 * adds an extra level of function call overhead but it is almost | |
2237 * always negligible. Fred Fish, Unisoft Systems Inc. | |
2238 */ | |
2239 | |
2240 char *sys_siglist[NSIG + 1] = | |
2241 { | |
2242 #ifdef AIX | |
2243 /* AIX has changed the signals a bit */ | |
2244 "bogus signal", /* 0 */ | |
2245 "hangup", /* 1 SIGHUP */ | |
2246 "interrupt", /* 2 SIGINT */ | |
2247 "quit", /* 3 SIGQUIT */ | |
2248 "illegal instruction", /* 4 SIGILL */ | |
2249 "trace trap", /* 5 SIGTRAP */ | |
2250 "IOT instruction", /* 6 SIGIOT */ | |
2251 "crash likely", /* 7 SIGDANGER */ | |
2252 "floating point exception", /* 8 SIGFPE */ | |
2253 "kill", /* 9 SIGKILL */ | |
2254 "bus error", /* 10 SIGBUS */ | |
2255 "segmentation violation", /* 11 SIGSEGV */ | |
2256 "bad argument to system call", /* 12 SIGSYS */ | |
2257 "write on a pipe with no one to read it", /* 13 SIGPIPE */ | |
2258 "alarm clock", /* 14 SIGALRM */ | |
2259 "software termination signum", /* 15 SIGTERM */ | |
2260 "user defined signal 1", /* 16 SIGUSR1 */ | |
2261 "user defined signal 2", /* 17 SIGUSR2 */ | |
2262 "death of a child", /* 18 SIGCLD */ | |
2263 "power-fail restart", /* 19 SIGPWR */ | |
2264 "bogus signal", /* 20 */ | |
2265 "bogus signal", /* 21 */ | |
2266 "bogus signal", /* 22 */ | |
2267 "bogus signal", /* 23 */ | |
2268 "bogus signal", /* 24 */ | |
2269 "LAN I/O interrupt", /* 25 SIGAIO */ | |
2270 "PTY I/O interrupt", /* 26 SIGPTY */ | |
2271 "I/O intervention required", /* 27 SIGIOINT */ | |
2272 "HFT grant", /* 28 SIGGRANT */ | |
2273 "HFT retract", /* 29 SIGRETRACT */ | |
2274 "HFT sound done", /* 30 SIGSOUND */ | |
2275 "HFT input ready", /* 31 SIGMSG */ | |
2276 #else /* not AIX */ | |
2277 "bogus signal", /* 0 */ | |
2278 "hangup", /* 1 SIGHUP */ | |
2279 "interrupt", /* 2 SIGINT */ | |
2280 "quit", /* 3 SIGQUIT */ | |
2281 "illegal instruction", /* 4 SIGILL */ | |
2282 "trace trap", /* 5 SIGTRAP */ | |
2283 "IOT instruction", /* 6 SIGIOT */ | |
2284 "EMT instruction", /* 7 SIGEMT */ | |
2285 "floating point exception", /* 8 SIGFPE */ | |
2286 "kill", /* 9 SIGKILL */ | |
2287 "bus error", /* 10 SIGBUS */ | |
2288 "segmentation violation", /* 11 SIGSEGV */ | |
2289 "bad argument to system call", /* 12 SIGSYS */ | |
2290 "write on a pipe with no one to read it", /* 13 SIGPIPE */ | |
2291 "alarm clock", /* 14 SIGALRM */ | |
2292 "software termination signum", /* 15 SIGTERM */ | |
2293 "user defined signal 1", /* 16 SIGUSR1 */ | |
2294 "user defined signal 2", /* 17 SIGUSR2 */ | |
2295 "death of a child", /* 18 SIGCLD */ | |
2296 "power-fail restart", /* 19 SIGPWR */ | |
2297 #endif /* not AIX */ | |
2298 0 | |
2299 }; | |
2300 | |
2301 /* | |
2302 * Warning, this function may not duplicate 4.2 action properly | |
2303 * under error conditions. | |
2304 */ | |
2305 | |
2306 #ifndef MAXPATHLEN | |
2307 /* In 4.1, param.h fails to define this. */ | |
2308 #define MAXPATHLEN 1024 | |
2309 #endif | |
2310 | |
2311 #ifndef HAVE_GETWD | |
2312 | |
2313 char * | |
2314 getwd (pathname) | |
2315 char *pathname; | |
2316 { | |
2317 char *npath, *spath; | |
2318 extern char *getcwd (); | |
2319 | |
2320 spath = npath = getcwd ((char *) 0, MAXPATHLEN); | |
2321 /* On Altos 3068, getcwd can return @hostname/dir, so discard | |
2322 up to first slash. Should be harmless on other systems. */ | |
2323 while (*npath && *npath != '/') | |
2324 npath++; | |
2325 strcpy (pathname, npath); | |
2326 free (spath); /* getcwd uses malloc */ | |
2327 return pathname; | |
2328 } | |
2329 | |
2330 #endif /* HAVE_GETWD */ | |
2331 | |
2332 /* | |
2333 * Emulate rename using unlink/link. Note that this is | |
2334 * only partially correct. Also, doesn't enforce restriction | |
2335 * that files be of same type (regular->regular, dir->dir, etc). | |
2336 */ | |
2337 | |
621 | 2338 #ifndef HAVE_RENAME |
2339 | |
491 | 2340 rename (from, to) |
2341 char *from; | |
2342 char *to; | |
2343 { | |
2344 if (access (from, 0) == 0) | |
2345 { | |
2346 unlink (to); | |
2347 if (link (from, to) == 0) | |
2348 if (unlink (from) == 0) | |
2349 return (0); | |
2350 } | |
2351 return (-1); | |
2352 } | |
2353 | |
621 | 2354 #endif |
2355 | |
491 | 2356 #ifndef HAVE_VFORK |
2357 | |
2358 /* | |
2359 * Substitute fork for vfork on USG flavors. | |
2360 */ | |
2361 | |
2362 vfork () | |
2363 { | |
2364 return (fork ()); | |
2365 } | |
2366 | |
2367 #endif /* not HAVE_VFORK */ | |
2368 | |
2369 #ifdef MISSING_UTIMES | |
2370 | |
2371 /* HPUX (among others) sets HAVE_TIMEVAL but does not implement utimes. */ | |
2372 | |
2373 utimes () | |
2374 { | |
2375 } | |
2376 #endif | |
2377 | |
2378 #ifdef IRIS_UTIME | |
2379 | |
2380 /* The IRIS (3.5) has timevals, but uses sys V utime, and doesn't have the | |
2381 utimbuf structure defined anywhere but in the man page. */ | |
2382 | |
2383 struct utimbuf | |
2384 { | |
2385 long actime; | |
2386 long modtime; | |
2387 }; | |
2388 | |
2389 utimes (name, tvp) | |
2390 char *name; | |
2391 struct timeval tvp[]; | |
2392 { | |
2393 struct utimbuf utb; | |
2394 utb.actime = tvp[0].tv_sec; | |
2395 utb.modtime = tvp[1].tv_sec; | |
2396 utime (name, &utb); | |
2397 } | |
2398 #endif /* IRIS_UTIME */ | |
2399 | |
2400 | |
2401 #ifdef HPUX | |
2402 #ifndef HAVE_PERROR | |
2403 | |
2404 /* HPUX curses library references perror, but as far as we know | |
2405 it won't be called. Anyway this definition will do for now. */ | |
2406 | |
2407 perror () | |
2408 { | |
2409 } | |
2410 | |
2411 #endif /* not HAVE_PERROR */ | |
2412 #endif /* HPUX */ | |
2413 | |
2414 #ifndef HAVE_DUP2 | |
2415 | |
2416 /* | |
2417 * Emulate BSD dup2. First close newd if it already exists. | |
2418 * Then, attempt to dup oldd. If not successful, call dup2 recursively | |
2419 * until we are, then close the unsuccessful ones. | |
2420 */ | |
2421 | |
2422 dup2 (oldd, newd) | |
2423 int oldd; | |
2424 int newd; | |
2425 { | |
2426 register int fd, ret; | |
2427 | |
2428 sys_close (newd); | |
2429 | |
2430 #ifdef F_DUPFD | |
2431 fd = fcntl (oldd, F_DUPFD, newd); | |
2432 if (fd != newd) | |
2433 error ("can't dup2 (%i,%i) : %s", oldd, newd, sys_errlist[errno]); | |
2434 #else | |
2435 fd = dup (old); | |
2436 if (fd == -1) | |
2437 return -1; | |
2438 if (fd == new) | |
2439 return new; | |
2440 ret = dup2 (old,new); | |
2441 sys_close (fd); | |
2442 return ret; | |
2443 #endif | |
2444 } | |
2445 | |
2446 #endif /* not HAVE_DUP2 */ | |
2447 | |
2448 /* | |
2449 * Gettimeofday. Simulate as much as possible. Only accurate | |
2450 * to nearest second. Emacs doesn't use tzp so ignore it for now. | |
2451 * Only needed when subprocesses are defined. | |
2452 */ | |
2453 | |
2454 #ifdef subprocesses | |
2455 #ifndef VMS | |
2456 #ifndef HAVE_GETTIMEOFDAY | |
2457 #ifdef HAVE_TIMEVAL | |
2458 | |
2459 /* ARGSUSED */ | |
2460 gettimeofday (tp, tzp) | |
2461 struct timeval *tp; | |
2462 struct timezone *tzp; | |
2463 { | |
2464 extern long time (); | |
2465 | |
2466 tp->tv_sec = time ((long *)0); | |
2467 tp->tv_usec = 0; | |
2468 tzp->tz_minuteswest = -1; | |
2469 } | |
2470 | |
2471 #endif | |
2472 #endif | |
2473 #endif | |
2474 #endif /* subprocess && !HAVE_GETTIMEOFDAY && HAVE_TIMEVAL && !VMS */ | |
2475 | |
2476 /* | |
2477 * This function will go away as soon as all the stubs fixed. (fnf) | |
2478 */ | |
2479 | |
2480 croak (badfunc) | |
2481 char *badfunc; | |
2482 { | |
2483 printf ("%s not yet implemented\r\n", badfunc); | |
2484 reset_sys_modes (); | |
2485 exit (1); | |
2486 } | |
2487 | |
2488 #endif /* USG */ | |
2489 | |
2490 #ifdef DGUX | |
2491 | |
2492 char *sys_siglist[NSIG + 1] = | |
2493 { | |
2494 "null signal", /* 0 SIGNULL */ | |
2495 "hangup", /* 1 SIGHUP */ | |
2496 "interrupt", /* 2 SIGINT */ | |
2497 "quit", /* 3 SIGQUIT */ | |
2498 "illegal instruction", /* 4 SIGILL */ | |
2499 "trace trap", /* 5 SIGTRAP */ | |
2500 "abort termination", /* 6 SIGABRT */ | |
2501 "SIGEMT", /* 7 SIGEMT */ | |
2502 "floating point exception", /* 8 SIGFPE */ | |
2503 "kill", /* 9 SIGKILL */ | |
2504 "bus error", /* 10 SIGBUS */ | |
2505 "segmentation violation", /* 11 SIGSEGV */ | |
2506 "bad argument to system call", /* 12 SIGSYS */ | |
2507 "write on a pipe with no reader", /* 13 SIGPIPE */ | |
2508 "alarm clock", /* 14 SIGALRM */ | |
2509 "software termination signal", /* 15 SIGTERM */ | |
2510 "user defined signal 1", /* 16 SIGUSR1 */ | |
2511 "user defined signal 2", /* 17 SIGUSR2 */ | |
2512 "child stopped or terminated", /* 18 SIGCLD */ | |
2513 "power-fail restart", /* 19 SIGPWR */ | |
2514 "window size changed", /* 20 SIGWINCH */ | |
2515 "undefined", /* 21 */ | |
2516 "pollable event occured", /* 22 SIGPOLL */ | |
2517 "sendable stop signal not from tty", /* 23 SIGSTOP */ | |
2518 "stop signal from tty", /* 24 SIGSTP */ | |
2519 "continue a stopped process", /* 25 SIGCONT */ | |
2520 "attempted background tty read", /* 26 SIGTTIN */ | |
2521 "attempted background tty write", /* 27 SIGTTOU */ | |
2522 "undefined", /* 28 */ | |
2523 "undefined", /* 29 */ | |
2524 "undefined", /* 30 */ | |
2525 "undefined", /* 31 */ | |
2526 "undefined", /* 32 */ | |
2527 "socket (TCP/IP) urgent data arrival", /* 33 SIGURG */ | |
2528 "I/O is possible", /* 34 SIGIO */ | |
2529 "exceeded cpu time limit", /* 35 SIGXCPU */ | |
2530 "exceeded file size limit", /* 36 SIGXFSZ */ | |
2531 "virtual time alarm", /* 37 SIGVTALRM */ | |
2532 "profiling time alarm", /* 38 SIGPROF */ | |
2533 "undefined", /* 39 */ | |
2534 "file record locks revoked", /* 40 SIGLOST */ | |
2535 "undefined", /* 41 */ | |
2536 "undefined", /* 42 */ | |
2537 "undefined", /* 43 */ | |
2538 "undefined", /* 44 */ | |
2539 "undefined", /* 45 */ | |
2540 "undefined", /* 46 */ | |
2541 "undefined", /* 47 */ | |
2542 "undefined", /* 48 */ | |
2543 "undefined", /* 49 */ | |
2544 "undefined", /* 50 */ | |
2545 "undefined", /* 51 */ | |
2546 "undefined", /* 52 */ | |
2547 "undefined", /* 53 */ | |
2548 "undefined", /* 54 */ | |
2549 "undefined", /* 55 */ | |
2550 "undefined", /* 56 */ | |
2551 "undefined", /* 57 */ | |
2552 "undefined", /* 58 */ | |
2553 "undefined", /* 59 */ | |
2554 "undefined", /* 60 */ | |
2555 "undefined", /* 61 */ | |
2556 "undefined", /* 62 */ | |
2557 "undefined", /* 63 */ | |
2558 "notification message in mess. queue", /* 64 SIGDGNOTIFY */ | |
2559 0 | |
2560 }; | |
2561 | |
2562 #endif /* DGUX */ | |
2563 | |
2564 /* Directory routines for systems that don't have them. */ | |
2565 | |
2566 #ifdef SYSV_SYSTEM_DIR | |
2567 | |
2568 #include <dirent.h> | |
2569 | |
2570 #ifndef AIX | |
2571 int | |
2572 closedir (dirp) | |
2573 register DIR *dirp; /* stream from opendir */ | |
2574 { | |
2575 sys_close (dirp->dd_fd); | |
2576 free ((char *) dirp->dd_buf); /* directory block defined in <dirent.h> */ | |
2577 free ((char *) dirp); | |
2578 } | |
2579 #endif /* not AIX */ | |
2580 #endif /* SYSV_SYSTEM_DIR */ | |
2581 | |
2582 #ifdef NONSYSTEM_DIR_LIBRARY | |
2583 | |
2584 DIR * | |
2585 opendir (filename) | |
2586 char *filename; /* name of directory */ | |
2587 { | |
2588 register DIR *dirp; /* -> malloc'ed storage */ | |
2589 register int fd; /* file descriptor for read */ | |
2590 struct stat sbuf; /* result of fstat */ | |
2591 | |
2592 fd = sys_open (filename, 0); | |
2593 if (fd < 0) | |
2594 return 0; | |
2595 | |
2596 if (fstat (fd, &sbuf) < 0 | |
2597 || (sbuf.st_mode & S_IFMT) != S_IFDIR | |
2598 || (dirp = (DIR *) malloc (sizeof (DIR))) == 0) | |
2599 { | |
2600 sys_close (fd); | |
2601 return 0; /* bad luck today */ | |
2602 } | |
2603 | |
2604 dirp->dd_fd = fd; | |
2605 dirp->dd_loc = dirp->dd_size = 0; /* refill needed */ | |
2606 | |
2607 return dirp; | |
2608 } | |
2609 | |
2610 void | |
2611 closedir (dirp) | |
2612 register DIR *dirp; /* stream from opendir */ | |
2613 { | |
2614 sys_close (dirp->dd_fd); | |
2615 free ((char *) dirp); | |
2616 } | |
2617 | |
2618 | |
2619 #ifndef VMS | |
2620 #define DIRSIZ 14 | |
2621 struct olddir | |
2622 { | |
2623 ino_t od_ino; /* inode */ | |
2624 char od_name[DIRSIZ]; /* filename */ | |
2625 }; | |
2626 #endif /* not VMS */ | |
2627 | |
2628 struct direct dir_static; /* simulated directory contents */ | |
2629 | |
2630 /* ARGUSED */ | |
2631 struct direct * | |
2632 readdir (dirp) | |
2633 register DIR *dirp; /* stream from opendir */ | |
2634 { | |
2635 #ifndef VMS | |
2636 register struct olddir *dp; /* -> directory data */ | |
2637 #else /* VMS */ | |
2638 register struct dir$_name *dp; /* -> directory data */ | |
2639 register struct dir$_version *dv; /* -> version data */ | |
2640 #endif /* VMS */ | |
2641 | |
2642 for (; ;) | |
2643 { | |
2644 if (dirp->dd_loc >= dirp->dd_size) | |
2645 dirp->dd_loc = dirp->dd_size = 0; | |
2646 | |
2647 if (dirp->dd_size == 0 /* refill buffer */ | |
2648 && (dirp->dd_size = sys_read (dirp->dd_fd, dirp->dd_buf, DIRBLKSIZ)) <= 0) | |
2649 return 0; | |
2650 | |
2651 #ifndef VMS | |
2652 dp = (struct olddir *) &dirp->dd_buf[dirp->dd_loc]; | |
2653 dirp->dd_loc += sizeof (struct olddir); | |
2654 | |
2655 if (dp->od_ino != 0) /* not deleted entry */ | |
2656 { | |
2657 dir_static.d_ino = dp->od_ino; | |
2658 strncpy (dir_static.d_name, dp->od_name, DIRSIZ); | |
2659 dir_static.d_name[DIRSIZ] = '\0'; | |
2660 dir_static.d_namlen = strlen (dir_static.d_name); | |
2661 dir_static.d_reclen = sizeof (struct direct) | |
2662 - MAXNAMLEN + 3 | |
2663 + dir_static.d_namlen - dir_static.d_namlen % 4; | |
2664 return &dir_static; /* -> simulated structure */ | |
2665 } | |
2666 #else /* VMS */ | |
2667 dp = (struct dir$_name *) dirp->dd_buf; | |
2668 if (dirp->dd_loc == 0) | |
2669 dirp->dd_loc = (dp->dir$b_namecount&1) ? dp->dir$b_namecount + 1 | |
2670 : dp->dir$b_namecount; | |
2671 dv = (struct dir$_version *)&dp->dir$t_name[dirp->dd_loc]; | |
2672 dir_static.d_ino = dv->dir$w_fid_num; | |
2673 dir_static.d_namlen = dp->dir$b_namecount; | |
2674 dir_static.d_reclen = sizeof (struct direct) | |
2675 - MAXNAMLEN + 3 | |
2676 + dir_static.d_namlen - dir_static.d_namlen % 4; | |
2677 strncpy (dir_static.d_name, dp->dir$t_name, dp->dir$b_namecount); | |
2678 dir_static.d_name[dir_static.d_namlen] = '\0'; | |
2679 dirp->dd_loc = dirp->dd_size; /* only one record at a time */ | |
2680 return &dir_static; | |
2681 #endif /* VMS */ | |
2682 } | |
2683 } | |
2684 | |
2685 #ifdef VMS | |
2686 /* readdirver is just like readdir except it returns all versions of a file | |
2687 as separate entries. */ | |
2688 | |
2689 /* ARGUSED */ | |
2690 struct direct * | |
2691 readdirver (dirp) | |
2692 register DIR *dirp; /* stream from opendir */ | |
2693 { | |
2694 register struct dir$_name *dp; /* -> directory data */ | |
2695 register struct dir$_version *dv; /* -> version data */ | |
2696 | |
2697 if (dirp->dd_loc >= dirp->dd_size - sizeof (struct dir$_name)) | |
2698 dirp->dd_loc = dirp->dd_size = 0; | |
2699 | |
2700 if (dirp->dd_size == 0 /* refill buffer */ | |
2701 && (dirp->dd_size = sys_read (dirp->dd_fd, dirp->dd_buf, DIRBLKSIZ)) <= 0) | |
2702 return 0; | |
2703 | |
2704 dp = (struct dir$_name *) dirp->dd_buf; | |
2705 if (dirp->dd_loc == 0) | |
2706 dirp->dd_loc = (dp->dir$b_namecount & 1) ? dp->dir$b_namecount + 1 | |
2707 : dp->dir$b_namecount; | |
2708 dv = (struct dir$_version *) &dp->dir$t_name[dirp->dd_loc]; | |
2709 strncpy (dir_static.d_name, dp->dir$t_name, dp->dir$b_namecount); | |
2710 sprintf (&dir_static.d_name[dp->dir$b_namecount], ";%d", dv->dir$w_version); | |
2711 dir_static.d_namlen = strlen (dir_static.d_name); | |
2712 dir_static.d_ino = dv->dir$w_fid_num; | |
2713 dir_static.d_reclen = sizeof (struct direct) - MAXNAMLEN + 3 | |
2714 + dir_static.d_namlen - dir_static.d_namlen % 4; | |
2715 dirp->dd_loc = ((char *) (++dv) - dp->dir$t_name); | |
2716 return &dir_static; | |
2717 } | |
2718 | |
2719 #endif /* VMS */ | |
2720 | |
2721 #endif /* NONSYSTEM_DIR_LIBRARY */ | |
2722 | |
2723 /* Functions for VMS */ | |
2724 #ifdef VMS | |
579 | 2725 #include "vms-pwd.h" |
491 | 2726 #include <acldef.h> |
2727 #include <chpdef.h> | |
2728 #include <jpidef.h> | |
2729 | |
2730 /* Return as a string the VMS error string pertaining to STATUS. | |
2731 Reuses the same static buffer each time it is called. */ | |
2732 | |
2733 char * | |
2734 vmserrstr (status) | |
2735 int status; /* VMS status code */ | |
2736 { | |
2737 int bufadr[2]; | |
2738 short len; | |
2739 static char buf[257]; | |
2740 | |
2741 bufadr[0] = sizeof buf - 1; | |
2742 bufadr[1] = (int) buf; | |
2743 if (! (SYS$GETMSG (status, &len, bufadr, 0x1, 0) & 1)) | |
2744 return "untranslatable VMS error status"; | |
2745 buf[len] = '\0'; | |
2746 return buf; | |
2747 } | |
2748 | |
2749 #ifdef access | |
2750 #undef access | |
2751 | |
2752 /* The following is necessary because 'access' emulation by VMS C (2.0) does | |
2753 * not work correctly. (It also doesn't work well in version 2.3.) | |
2754 */ | |
2755 | |
2756 #ifdef VMS4_4 | |
2757 | |
2758 #define DESCRIPTOR(name,string) struct dsc$descriptor_s name = \ | |
2759 { strlen (string), DSC$K_DTYPE_T, DSC$K_CLASS_S, string } | |
2760 | |
2761 typedef union { | |
2762 struct { | |
2763 unsigned short s_buflen; | |
2764 unsigned short s_code; | |
2765 char *s_bufadr; | |
2766 unsigned short *s_retlenadr; | |
2767 } s; | |
2768 int end; | |
2769 } item; | |
2770 #define buflen s.s_buflen | |
2771 #define code s.s_code | |
2772 #define bufadr s.s_bufadr | |
2773 #define retlenadr s.s_retlenadr | |
2774 | |
2775 #define R_OK 4 /* test for read permission */ | |
2776 #define W_OK 2 /* test for write permission */ | |
2777 #define X_OK 1 /* test for execute (search) permission */ | |
2778 #define F_OK 0 /* test for presence of file */ | |
2779 | |
2780 int | |
2781 sys_access (path, mode) | |
2782 char *path; | |
2783 int mode; | |
2784 { | |
2785 static char *user = NULL; | |
2786 char dir_fn[512]; | |
2787 | |
2788 /* translate possible directory spec into .DIR file name, so brain-dead | |
2789 * access can treat the directory like a file. */ | |
2790 if (directory_file_name (path, dir_fn)) | |
2791 path = dir_fn; | |
2792 | |
2793 if (mode == F_OK) | |
2794 return access (path, mode); | |
2795 if (user == NULL && (user = (char *) getenv ("USER")) == NULL) | |
2796 return -1; | |
2797 { | |
2798 int stat; | |
2799 int flags; | |
2800 int acces; | |
2801 unsigned short int dummy; | |
2802 item itemlst[3]; | |
2803 static int constant = ACL$C_FILE; | |
2804 DESCRIPTOR (path_desc, path); | |
2805 DESCRIPTOR (user_desc, user); | |
2806 | |
2807 flags = 0; | |
2808 acces = 0; | |
2809 if ((mode & X_OK) && ((stat = access (path, mode)) < 0 || mode == X_OK)) | |
2810 return stat; | |
2811 if (mode & R_OK) | |
2812 acces |= CHP$M_READ; | |
2813 if (mode & W_OK) | |
2814 acces |= CHP$M_WRITE; | |
2815 itemlst[0].buflen = sizeof (int); | |
2816 itemlst[0].code = CHP$_FLAGS; | |
2817 itemlst[0].bufadr = (char *) &flags; | |
2818 itemlst[0].retlenadr = &dummy; | |
2819 itemlst[1].buflen = sizeof (int); | |
2820 itemlst[1].code = CHP$_ACCESS; | |
2821 itemlst[1].bufadr = (char *) &acces; | |
2822 itemlst[1].retlenadr = &dummy; | |
2823 itemlst[2].end = CHP$_END; | |
2824 stat = SYS$CHECK_ACCESS (&constant, &path_desc, &user_desc, itemlst); | |
2825 return stat == SS$_NORMAL ? 0 : -1; | |
2826 } | |
2827 } | |
2828 | |
2829 #else /* not VMS4_4 */ | |
2830 | |
2831 #include <prvdef.h> | |
2832 #define ACE$M_WRITE 2 | |
2833 #define ACE$C_KEYID 1 | |
2834 | |
2835 static unsigned short memid, grpid; | |
2836 static unsigned int uic; | |
2837 | |
2838 /* Called from init_sys_modes, so it happens not very often | |
2839 but at least each time Emacs is loaded. */ | |
2840 sys_access_reinit () | |
2841 { | |
2842 uic = 0; | |
2843 } | |
2844 | |
2845 int | |
2846 sys_access (filename, type) | |
2847 char * filename; | |
2848 int type; | |
2849 { | |
2850 struct FAB fab; | |
2851 struct XABPRO xab; | |
2852 int status, size, i, typecode, acl_controlled; | |
2853 unsigned int *aclptr, *aclend, aclbuf[60]; | |
2854 union prvdef prvmask; | |
2855 | |
2856 /* Get UIC and GRP values for protection checking. */ | |
2857 if (uic == 0) | |
2858 { | |
2859 status = LIB$GETJPI (&JPI$_UIC, 0, 0, &uic, 0, 0); | |
2860 if (! (status & 1)) | |
2861 return -1; | |
2862 memid = uic & 0xFFFF; | |
2863 grpid = uic >> 16; | |
2864 } | |
2865 | |
2866 if (type != 2) /* not checking write access */ | |
2867 return access (filename, type); | |
2868 | |
2869 /* Check write protection. */ | |
2870 | |
2871 #define CHECKPRIV(bit) (prvmask.bit) | |
2872 #define WRITEABLE(field) (! ((xab.xab$w_pro >> field) & XAB$M_NOWRITE)) | |
2873 | |
2874 /* Find privilege bits */ | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
2875 status = SYS$SETPRV (0, 0, 0, prvmask); |
491 | 2876 if (! (status & 1)) |
2877 error ("Unable to find privileges: %s", vmserrstr (status)); | |
2878 if (CHECKPRIV (PRV$V_BYPASS)) | |
2879 return 0; /* BYPASS enabled */ | |
2880 fab = cc$rms_fab; | |
2881 fab.fab$b_fac = FAB$M_GET; | |
2882 fab.fab$l_fna = filename; | |
2883 fab.fab$b_fns = strlen (filename); | |
2884 fab.fab$l_xab = &xab; | |
2885 xab = cc$rms_xabpro; | |
2886 xab.xab$l_aclbuf = aclbuf; | |
2887 xab.xab$w_aclsiz = sizeof (aclbuf); | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
2888 status = SYS$OPEN (&fab, 0, 0); |
491 | 2889 if (! (status & 1)) |
2890 return -1; | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
2891 SYS$CLOSE (&fab, 0, 0); |
491 | 2892 /* Check system access */ |
2893 if (CHECKPRIV (PRV$V_SYSPRV) && WRITEABLE (XAB$V_SYS)) | |
2894 return 0; | |
2895 /* Check ACL entries, if any */ | |
2896 acl_controlled = 0; | |
2897 if (xab.xab$w_acllen > 0) | |
2898 { | |
2899 aclptr = aclbuf; | |
2900 aclend = &aclbuf[xab.xab$w_acllen / 4]; | |
2901 while (*aclptr && aclptr < aclend) | |
2902 { | |
2903 size = (*aclptr & 0xff) / 4; | |
2904 typecode = (*aclptr >> 8) & 0xff; | |
2905 if (typecode == ACE$C_KEYID) | |
2906 for (i = size - 1; i > 1; i--) | |
2907 if (aclptr[i] == uic) | |
2908 { | |
2909 acl_controlled = 1; | |
2910 if (aclptr[1] & ACE$M_WRITE) | |
2911 return 0; /* Write access through ACL */ | |
2912 } | |
2913 aclptr = &aclptr[size]; | |
2914 } | |
2915 if (acl_controlled) /* ACL specified, prohibits write access */ | |
2916 return -1; | |
2917 } | |
2918 /* No ACL entries specified, check normal protection */ | |
2919 if (WRITEABLE (XAB$V_WLD)) /* World writeable */ | |
2920 return 0; | |
2921 if (WRITEABLE (XAB$V_GRP) && | |
2922 (unsigned short) (xab.xab$l_uic >> 16) == grpid) | |
2923 return 0; /* Group writeable */ | |
2924 if (WRITEABLE (XAB$V_OWN) && | |
2925 (xab.xab$l_uic & 0xFFFF) == memid) | |
2926 return 0; /* Owner writeable */ | |
2927 | |
2928 return -1; /* Not writeable */ | |
2929 } | |
2930 #endif /* not VMS4_4 */ | |
2931 #endif /* access */ | |
2932 | |
2933 static char vtbuf[NAM$C_MAXRSS+1]; | |
2934 | |
2935 /* translate a vms file spec to a unix path */ | |
2936 char * | |
2937 sys_translate_vms (vfile) | |
2938 char * vfile; | |
2939 { | |
2940 char * p; | |
2941 char * targ; | |
2942 | |
2943 if (!vfile) | |
2944 return 0; | |
2945 | |
2946 targ = vtbuf; | |
2947 | |
2948 /* leading device or logical name is a root directory */ | |
2949 if (p = strchr (vfile, ':')) | |
2950 { | |
2951 *targ++ = '/'; | |
2952 while (vfile < p) | |
2953 *targ++ = *vfile++; | |
2954 vfile++; | |
2955 *targ++ = '/'; | |
2956 } | |
2957 p = vfile; | |
2958 if (*p == '[' || *p == '<') | |
2959 { | |
2960 while (*++vfile != *p + 2) | |
2961 switch (*vfile) | |
2962 { | |
2963 case '.': | |
2964 if (vfile[-1] == *p) | |
2965 *targ++ = '.'; | |
2966 *targ++ = '/'; | |
2967 break; | |
2968 | |
2969 case '-': | |
2970 *targ++ = '.'; | |
2971 *targ++ = '.'; | |
2972 break; | |
2973 | |
2974 default: | |
2975 *targ++ = *vfile; | |
2976 break; | |
2977 } | |
2978 vfile++; | |
2979 *targ++ = '/'; | |
2980 } | |
2981 while (*vfile) | |
2982 *targ++ = *vfile++; | |
2983 | |
2984 return vtbuf; | |
2985 } | |
2986 | |
2987 static char utbuf[NAM$C_MAXRSS+1]; | |
2988 | |
2989 /* translate a unix path to a VMS file spec */ | |
2990 char * | |
2991 sys_translate_unix (ufile) | |
2992 char * ufile; | |
2993 { | |
2994 int slash_seen = 0; | |
2995 char *p; | |
2996 char * targ; | |
2997 | |
2998 if (!ufile) | |
2999 return 0; | |
3000 | |
3001 targ = utbuf; | |
3002 | |
3003 if (*ufile == '/') | |
3004 { | |
3005 ufile++; | |
3006 } | |
3007 | |
3008 while (*ufile) | |
3009 { | |
3010 switch (*ufile) | |
3011 { | |
3012 case '/': | |
3013 if (slash_seen) | |
3014 if (index (&ufile[1], '/')) | |
3015 *targ++ = '.'; | |
3016 else | |
3017 *targ++ = ']'; | |
3018 else | |
3019 { | |
3020 *targ++ = ':'; | |
3021 if (index (&ufile[1], '/')) | |
3022 *targ++ = '['; | |
3023 slash_seen = 1; | |
3024 } | |
3025 break; | |
3026 | |
3027 case '.': | |
3028 if (strncmp (ufile, "./", 2) == 0) | |
3029 { | |
3030 if (!slash_seen) | |
3031 { | |
3032 *targ++ = '['; | |
3033 slash_seen = 1; | |
3034 } | |
3035 ufile++; /* skip the dot */ | |
3036 if (index (&ufile[1], '/')) | |
3037 *targ++ = '.'; | |
3038 else | |
3039 *targ++ = ']'; | |
3040 } | |
3041 else if (strncmp (ufile, "../", 3) == 0) | |
3042 { | |
3043 if (!slash_seen) | |
3044 { | |
3045 *targ++ = '['; | |
3046 slash_seen = 1; | |
3047 } | |
3048 *targ++ = '-'; | |
3049 ufile += 2; /* skip the dots */ | |
3050 if (index (&ufile[1], '/')) | |
3051 *targ++ = '.'; | |
3052 else | |
3053 *targ++ = ']'; | |
3054 } | |
3055 else | |
3056 *targ++ = *ufile; | |
3057 break; | |
3058 | |
3059 default: | |
3060 *targ++ = *ufile; | |
3061 break; | |
3062 } | |
3063 ufile++; | |
3064 } | |
3065 *targ = '\0'; | |
3066 | |
3067 return utbuf; | |
3068 } | |
3069 | |
3070 char * | |
3071 getwd (pathname) | |
3072 char *pathname; | |
3073 { | |
3074 char *ptr; | |
3075 strcpy (pathname, egetenv ("PATH")); | |
3076 | |
3077 ptr = pathname; | |
3078 while (*ptr) | |
3079 { | |
3080 if ('a' <= *ptr && *ptr <= 'z') | |
3081 *ptr -= 040; | |
3082 ptr++; | |
3083 } | |
3084 return pathname; | |
3085 } | |
3086 | |
3087 getppid () | |
3088 { | |
3089 long item_code = JPI$_OWNER; | |
3090 unsigned long parent_id; | |
3091 int status; | |
3092 | |
3093 if (((status = LIB$GETJPI (&item_code, 0, 0, &parent_id)) & 1) == 0) | |
3094 { | |
3095 errno = EVMSERR; | |
3096 vaxc$errno = status; | |
3097 return -1; | |
3098 } | |
3099 return parent_id; | |
3100 } | |
3101 | |
3102 #undef getuid | |
3103 unsigned | |
3104 sys_getuid () | |
3105 { | |
3106 return (getgid () << 16) | getuid (); | |
3107 } | |
3108 | |
3109 int | |
3110 sys_read (fildes, buf, nbyte) | |
3111 int fildes; | |
3112 char *buf; | |
3113 unsigned int nbyte; | |
3114 { | |
3115 return read (fildes, buf, (nbyte < MAXIOSIZE ? nbyte : MAXIOSIZE)); | |
3116 } | |
3117 | |
3118 #if 0 | |
3119 int | |
3120 sys_write (fildes, buf, nbyte) | |
3121 int fildes; | |
3122 char *buf; | |
3123 unsigned int nbyte; | |
3124 { | |
3125 register int nwrote, rtnval = 0; | |
3126 | |
3127 while (nbyte > MAXIOSIZE && (nwrote = write (fildes, buf, MAXIOSIZE)) > 0) { | |
3128 nbyte -= nwrote; | |
3129 buf += nwrote; | |
3130 rtnval += nwrote; | |
3131 } | |
3132 if (nwrote < 0) | |
3133 return rtnval ? rtnval : -1; | |
3134 if ((nwrote = write (fildes, buf, nbyte)) < 0) | |
3135 return rtnval ? rtnval : -1; | |
3136 return (rtnval + nwrote); | |
3137 } | |
3138 #endif /* 0 */ | |
3139 | |
3140 /* | |
3141 * VAX/VMS VAX C RTL really loses. It insists that records | |
3142 * end with a newline (carriage return) character, and if they | |
3143 * don't it adds one (nice of it isn't it!) | |
3144 * | |
3145 * Thus we do this stupidity below. | |
3146 */ | |
3147 | |
3148 int | |
3149 sys_write (fildes, buf, nbytes) | |
3150 int fildes; | |
3151 char *buf; | |
3152 unsigned int nbytes; | |
3153 { | |
3154 register char *p; | |
3155 register char *e; | |
525 | 3156 int sum = 0; |
3157 struct stat st; | |
3158 | |
3159 fstat (fildes, &st); | |
491 | 3160 p = buf; |
3161 while (nbytes > 0) | |
3162 { | |
525 | 3163 int len, retval; |
3164 | |
3165 /* Handle fixed-length files with carriage control. */ | |
3166 if (st.st_fab_rfm == FAB$C_FIX | |
3167 && ((st.st_fab_rat & (FAB$M_FTN | FAB$M_CR)) != 0)) | |
3168 { | |
3169 len = st.st_fab_mrs; | |
3170 retval = write (fildes, p, min (len, nbytes)); | |
3171 if (retval != len) | |
3172 return -1; | |
3173 retval++; /* This skips the implied carriage control */ | |
3174 } | |
3175 else | |
3176 { | |
3177 e = p + min (MAXIOSIZE, nbytes) - 1; | |
3178 while (*e != '\n' && e > p) e--; | |
3179 if (p == e) /* Ok.. so here we add a newline... sigh. */ | |
3180 e = p + min (MAXIOSIZE, nbytes) - 1; | |
3181 len = e + 1 - p; | |
3182 retval = write (fildes, p, len); | |
3183 if (retval != len) | |
3184 return -1; | |
3185 } | |
3186 p += retval; | |
3187 sum += retval; | |
491 | 3188 nbytes -= retval; |
3189 } | |
3190 return sum; | |
3191 } | |
3192 | |
3193 /* Create file NEW copying its attributes from file OLD. If | |
3194 OLD is 0 or does not exist, create based on the value of | |
3195 vms_stmlf_recfm. */ | |
3196 | |
3197 /* Protection value the file should ultimately have. | |
3198 Set by create_copy_attrs, and use by rename_sansversions. */ | |
3199 static unsigned short int fab_final_pro; | |
3200 | |
3201 int | |
3202 creat_copy_attrs (old, new) | |
3203 char *old, *new; | |
3204 { | |
3205 struct FAB fab = cc$rms_fab; | |
3206 struct XABPRO xabpro; | |
3207 char aclbuf[256]; /* Choice of size is arbitrary. See below. */ | |
3208 extern int vms_stmlf_recfm; | |
3209 | |
3210 if (old) | |
3211 { | |
3212 fab.fab$b_fac = FAB$M_GET; | |
3213 fab.fab$l_fna = old; | |
3214 fab.fab$b_fns = strlen (old); | |
3215 fab.fab$l_xab = (char *) &xabpro; | |
3216 xabpro = cc$rms_xabpro; | |
3217 xabpro.xab$l_aclbuf = aclbuf; | |
3218 xabpro.xab$w_aclsiz = sizeof aclbuf; | |
3219 /* Call $OPEN to fill in the fab & xabpro fields. */ | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3220 if (SYS$OPEN (&fab, 0, 0) & 1) |
491 | 3221 { |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3222 SYS$CLOSE (&fab, 0, 0); |
491 | 3223 fab.fab$l_alq = 0; /* zero the allocation quantity */ |
3224 if (xabpro.xab$w_acllen > 0) | |
3225 { | |
3226 if (xabpro.xab$w_acllen > sizeof aclbuf) | |
3227 /* If the acl buffer was too short, redo open with longer one. | |
3228 Wouldn't need to do this if there were some system imposed | |
3229 limit on the size of an ACL, but I can't find any such. */ | |
3230 { | |
3231 xabpro.xab$l_aclbuf = (char *) alloca (xabpro.xab$w_acllen); | |
3232 xabpro.xab$w_aclsiz = xabpro.xab$w_acllen; | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3233 if (SYS$OPEN (&fab, 0, 0) & 1) |
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3234 SYS$CLOSE (&fab, 0, 0); |
491 | 3235 else |
3236 old = 0; | |
3237 } | |
3238 } | |
3239 else | |
3240 xabpro.xab$l_aclbuf = 0; | |
3241 } | |
3242 else | |
3243 old = 0; | |
3244 } | |
3245 fab.fab$l_fna = new; | |
3246 fab.fab$b_fns = strlen (new); | |
3247 if (!old) | |
3248 { | |
3249 fab.fab$l_xab = 0; | |
3250 fab.fab$b_rfm = vms_stmlf_recfm ? FAB$C_STMLF : FAB$C_VAR; | |
3251 fab.fab$b_rat = FAB$M_CR; | |
3252 } | |
3253 | |
3254 /* Set the file protections such that we will be able to manipulate | |
3255 this file. Once we are done writing and renaming it, we will set | |
3256 the protections back. */ | |
3257 if (old) | |
3258 fab_final_pro = xabpro.xab$w_pro; | |
3259 else | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3260 SYS$SETDFPROT (0, &fab_final_pro); |
491 | 3261 xabpro.xab$w_pro &= 0xff0f; /* set O:rewd for now. This is set back later. */ |
3262 | |
3263 /* Create the new file with either default attrs or attrs copied | |
3264 from old file. */ | |
3265 if (!(SYS$CREATE (&fab, 0, 0) & 1)) | |
3266 return -1; | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3267 SYS$CLOSE (&fab, 0, 0); |
491 | 3268 /* As this is a "replacement" for creat, return a file descriptor |
3269 opened for writing. */ | |
3270 return open (new, O_WRONLY); | |
3271 } | |
3272 | |
3273 #ifdef creat | |
3274 #undef creat | |
3275 #include <varargs.h> | |
3276 #ifdef __GNUC__ | |
3277 #ifndef va_count | |
3278 #define va_count(X) ((X) = *(((int *) &(va_alist)) - 1)) | |
3279 #endif | |
3280 #endif | |
3281 | |
3282 sys_creat (va_alist) | |
3283 va_dcl | |
3284 { | |
3285 va_list list_incrementor; | |
3286 char *name; | |
3287 int mode; | |
3288 int rfd; /* related file descriptor */ | |
3289 int fd; /* Our new file descriptor */ | |
3290 int count; | |
3291 struct stat st_buf; | |
3292 char rfm[12]; | |
3293 char rat[15]; | |
3294 char mrs[13]; | |
3295 char fsz[13]; | |
3296 extern int vms_stmlf_recfm; | |
3297 | |
3298 va_count (count); | |
3299 va_start (list_incrementor); | |
3300 name = va_arg (list_incrementor, char *); | |
3301 mode = va_arg (list_incrementor, int); | |
3302 if (count > 2) | |
3303 rfd = va_arg (list_incrementor, int); | |
3304 va_end (list_incrementor); | |
3305 if (count > 2) | |
3306 { | |
3307 /* Use information from the related file descriptor to set record | |
3308 format of the newly created file. */ | |
3309 fstat (rfd, &st_buf); | |
3310 switch (st_buf.st_fab_rfm) | |
3311 { | |
3312 case FAB$C_FIX: | |
3313 strcpy (rfm, "rfm = fix"); | |
3314 sprintf (mrs, "mrs = %d", st_buf.st_fab_mrs); | |
3315 strcpy (rat, "rat = "); | |
3316 if (st_buf.st_fab_rat & FAB$M_CR) | |
3317 strcat (rat, "cr"); | |
3318 else if (st_buf.st_fab_rat & FAB$M_FTN) | |
3319 strcat (rat, "ftn"); | |
3320 else if (st_buf.st_fab_rat & FAB$M_PRN) | |
3321 strcat (rat, "prn"); | |
3322 if (st_buf.st_fab_rat & FAB$M_BLK) | |
3323 if (st_buf.st_fab_rat & (FAB$M_CR|FAB$M_FTN|FAB$M_PRN)) | |
3324 strcat (rat, ", blk"); | |
3325 else | |
3326 strcat (rat, "blk"); | |
3327 return creat (name, 0, rfm, rat, mrs); | |
3328 | |
3329 case FAB$C_VFC: | |
3330 strcpy (rfm, "rfm = vfc"); | |
3331 sprintf (fsz, "fsz = %d", st_buf.st_fab_fsz); | |
3332 strcpy (rat, "rat = "); | |
3333 if (st_buf.st_fab_rat & FAB$M_CR) | |
3334 strcat (rat, "cr"); | |
3335 else if (st_buf.st_fab_rat & FAB$M_FTN) | |
3336 strcat (rat, "ftn"); | |
3337 else if (st_buf.st_fab_rat & FAB$M_PRN) | |
3338 strcat (rat, "prn"); | |
3339 if (st_buf.st_fab_rat & FAB$M_BLK) | |
3340 if (st_buf.st_fab_rat & (FAB$M_CR|FAB$M_FTN|FAB$M_PRN)) | |
3341 strcat (rat, ", blk"); | |
3342 else | |
3343 strcat (rat, "blk"); | |
3344 return creat (name, 0, rfm, rat, fsz); | |
3345 | |
3346 case FAB$C_STM: | |
3347 strcpy (rfm, "rfm = stm"); | |
3348 break; | |
3349 | |
3350 case FAB$C_STMCR: | |
3351 strcpy (rfm, "rfm = stmcr"); | |
3352 break; | |
3353 | |
3354 case FAB$C_STMLF: | |
3355 strcpy (rfm, "rfm = stmlf"); | |
3356 break; | |
3357 | |
3358 case FAB$C_UDF: | |
3359 strcpy (rfm, "rfm = udf"); | |
3360 break; | |
3361 | |
3362 case FAB$C_VAR: | |
3363 strcpy (rfm, "rfm = var"); | |
3364 break; | |
3365 } | |
3366 strcpy (rat, "rat = "); | |
3367 if (st_buf.st_fab_rat & FAB$M_CR) | |
3368 strcat (rat, "cr"); | |
3369 else if (st_buf.st_fab_rat & FAB$M_FTN) | |
3370 strcat (rat, "ftn"); | |
3371 else if (st_buf.st_fab_rat & FAB$M_PRN) | |
3372 strcat (rat, "prn"); | |
3373 if (st_buf.st_fab_rat & FAB$M_BLK) | |
3374 if (st_buf.st_fab_rat & (FAB$M_CR|FAB$M_FTN|FAB$M_PRN)) | |
3375 strcat (rat, ", blk"); | |
3376 else | |
3377 strcat (rat, "blk"); | |
3378 } | |
3379 else | |
3380 { | |
3381 strcpy (rfm, vms_stmlf_recfm ? "rfm = stmlf" : "rfm=var"); | |
3382 strcpy (rat, "rat=cr"); | |
3383 } | |
3384 /* Until the VAX C RTL fixes the many bugs with modes, always use | |
3385 mode 0 to get the user's default protection. */ | |
3386 fd = creat (name, 0, rfm, rat); | |
3387 if (fd < 0 && errno == EEXIST) | |
3388 { | |
3389 if (unlink (name) < 0) | |
3390 report_file_error ("delete", build_string (name)); | |
3391 fd = creat (name, 0, rfm, rat); | |
3392 } | |
3393 return fd; | |
3394 } | |
3395 #endif /* creat */ | |
3396 | |
3397 /* fwrite to stdout is S L O W. Speed it up by using fputc...*/ | |
3398 sys_fwrite (ptr, size, num, fp) | |
3399 register char * ptr; | |
3400 FILE * fp; | |
3401 { | |
3402 register int tot = num * size; | |
3403 | |
3404 while (tot--) | |
3405 fputc (*ptr++, fp); | |
3406 } | |
3407 | |
3408 /* | |
3409 * The VMS C library routine creat actually creates a new version of an | |
3410 * existing file rather than truncating the old version. There are times | |
3411 * when this is not the desired behavior, for instance, when writing an | |
3412 * auto save file (you only want one version), or when you don't have | |
3413 * write permission in the directory containing the file (but the file | |
3414 * itself is writable). Hence this routine, which is equivalent to | |
3415 * "close (creat (fn, 0));" on Unix if fn already exists. | |
3416 */ | |
3417 int | |
3418 vms_truncate (fn) | |
3419 char *fn; | |
3420 { | |
3421 struct FAB xfab = cc$rms_fab; | |
3422 struct RAB xrab = cc$rms_rab; | |
3423 int status; | |
3424 | |
3425 xfab.fab$l_fop = FAB$M_TEF; /* free allocated but unused blocks on close */ | |
3426 xfab.fab$b_fac = FAB$M_TRN | FAB$M_GET; /* allow truncate and get access */ | |
3427 xfab.fab$b_shr = FAB$M_NIL; /* allow no sharing - file must be locked */ | |
3428 xfab.fab$l_fna = fn; | |
3429 xfab.fab$b_fns = strlen (fn); | |
3430 xfab.fab$l_dna = ";0"; /* default to latest version of the file */ | |
3431 xfab.fab$b_dns = 2; | |
3432 xrab.rab$l_fab = &xfab; | |
3433 | |
3434 /* This gibberish opens the file, positions to the first record, and | |
3435 deletes all records from there until the end of file. */ | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3436 if ((SYS$OPEN (&xfab) & 01) == 01) |
491 | 3437 { |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3438 if ((SYS$CONNECT (&xrab) & 01) == 01 && |
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3439 (SYS$FIND (&xrab) & 01) == 01 && |
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3440 (SYS$TRUNCATE (&xrab) & 01) == 01) |
491 | 3441 status = 0; |
3442 else | |
3443 status = -1; | |
3444 } | |
3445 else | |
3446 status = -1; | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3447 SYS$CLOSE (&xfab); |
491 | 3448 return status; |
3449 } | |
3450 | |
3451 /* Define this symbol to actually read SYSUAF.DAT. This requires either | |
3452 SYSPRV or a readable SYSUAF.DAT. */ | |
3453 | |
3454 #ifdef READ_SYSUAF | |
3455 /* | |
3456 * getuaf.c | |
3457 * | |
3458 * Routine to read the VMS User Authorization File and return | |
3459 * a specific user's record. | |
3460 */ | |
3461 | |
3462 static struct UAF retuaf; | |
3463 | |
3464 struct UAF * | |
3465 get_uaf_name (uname) | |
3466 char * uname; | |
3467 { | |
3468 register status; | |
3469 struct FAB uaf_fab; | |
3470 struct RAB uaf_rab; | |
3471 | |
3472 uaf_fab = cc$rms_fab; | |
3473 uaf_rab = cc$rms_rab; | |
3474 /* initialize fab fields */ | |
3475 uaf_fab.fab$l_fna = "SYS$SYSTEM:SYSUAF.DAT"; | |
3476 uaf_fab.fab$b_fns = 21; | |
3477 uaf_fab.fab$b_fac = FAB$M_GET; | |
3478 uaf_fab.fab$b_org = FAB$C_IDX; | |
3479 uaf_fab.fab$b_shr = FAB$M_GET|FAB$M_PUT|FAB$M_UPD|FAB$M_DEL; | |
3480 /* initialize rab fields */ | |
3481 uaf_rab.rab$l_fab = &uaf_fab; | |
3482 /* open the User Authorization File */ | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3483 status = SYS$OPEN (&uaf_fab); |
491 | 3484 if (!(status&1)) |
3485 { | |
3486 errno = EVMSERR; | |
3487 vaxc$errno = status; | |
3488 return 0; | |
3489 } | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3490 status = SYS$CONNECT (&uaf_rab); |
491 | 3491 if (!(status&1)) |
3492 { | |
3493 errno = EVMSERR; | |
3494 vaxc$errno = status; | |
3495 return 0; | |
3496 } | |
3497 /* read the requested record - index is in uname */ | |
3498 uaf_rab.rab$l_kbf = uname; | |
3499 uaf_rab.rab$b_ksz = strlen (uname); | |
3500 uaf_rab.rab$b_rac = RAB$C_KEY; | |
3501 uaf_rab.rab$l_ubf = (char *)&retuaf; | |
3502 uaf_rab.rab$w_usz = sizeof retuaf; | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3503 status = SYS$GET (&uaf_rab); |
491 | 3504 if (!(status&1)) |
3505 { | |
3506 errno = EVMSERR; | |
3507 vaxc$errno = status; | |
3508 return 0; | |
3509 } | |
3510 /* close the User Authorization File */ | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3511 status = SYS$DISCONNECT (&uaf_rab); |
491 | 3512 if (!(status&1)) |
3513 { | |
3514 errno = EVMSERR; | |
3515 vaxc$errno = status; | |
3516 return 0; | |
3517 } | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3518 status = SYS$CLOSE (&uaf_fab); |
491 | 3519 if (!(status&1)) |
3520 { | |
3521 errno = EVMSERR; | |
3522 vaxc$errno = status; | |
3523 return 0; | |
3524 } | |
3525 return &retuaf; | |
3526 } | |
3527 | |
3528 struct UAF * | |
3529 get_uaf_uic (uic) | |
3530 unsigned long uic; | |
3531 { | |
3532 register status; | |
3533 struct FAB uaf_fab; | |
3534 struct RAB uaf_rab; | |
3535 | |
3536 uaf_fab = cc$rms_fab; | |
3537 uaf_rab = cc$rms_rab; | |
3538 /* initialize fab fields */ | |
3539 uaf_fab.fab$l_fna = "SYS$SYSTEM:SYSUAF.DAT"; | |
3540 uaf_fab.fab$b_fns = 21; | |
3541 uaf_fab.fab$b_fac = FAB$M_GET; | |
3542 uaf_fab.fab$b_org = FAB$C_IDX; | |
3543 uaf_fab.fab$b_shr = FAB$M_GET|FAB$M_PUT|FAB$M_UPD|FAB$M_DEL; | |
3544 /* initialize rab fields */ | |
3545 uaf_rab.rab$l_fab = &uaf_fab; | |
3546 /* open the User Authorization File */ | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3547 status = SYS$OPEN (&uaf_fab); |
491 | 3548 if (!(status&1)) |
3549 { | |
3550 errno = EVMSERR; | |
3551 vaxc$errno = status; | |
3552 return 0; | |
3553 } | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3554 status = SYS$CONNECT (&uaf_rab); |
491 | 3555 if (!(status&1)) |
3556 { | |
3557 errno = EVMSERR; | |
3558 vaxc$errno = status; | |
3559 return 0; | |
3560 } | |
3561 /* read the requested record - index is in uic */ | |
3562 uaf_rab.rab$b_krf = 1; /* 1st alternate key */ | |
3563 uaf_rab.rab$l_kbf = (char *) &uic; | |
3564 uaf_rab.rab$b_ksz = sizeof uic; | |
3565 uaf_rab.rab$b_rac = RAB$C_KEY; | |
3566 uaf_rab.rab$l_ubf = (char *)&retuaf; | |
3567 uaf_rab.rab$w_usz = sizeof retuaf; | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3568 status = SYS$GET (&uaf_rab); |
491 | 3569 if (!(status&1)) |
3570 { | |
3571 errno = EVMSERR; | |
3572 vaxc$errno = status; | |
3573 return 0; | |
3574 } | |
3575 /* close the User Authorization File */ | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3576 status = SYS$DISCONNECT (&uaf_rab); |
491 | 3577 if (!(status&1)) |
3578 { | |
3579 errno = EVMSERR; | |
3580 vaxc$errno = status; | |
3581 return 0; | |
3582 } | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3583 status = SYS$CLOSE (&uaf_fab); |
491 | 3584 if (!(status&1)) |
3585 { | |
3586 errno = EVMSERR; | |
3587 vaxc$errno = status; | |
3588 return 0; | |
3589 } | |
3590 return &retuaf; | |
3591 } | |
3592 | |
3593 static struct passwd retpw; | |
3594 | |
3595 struct passwd * | |
3596 cnv_uaf_pw (up) | |
3597 struct UAF * up; | |
3598 { | |
3599 char * ptr; | |
3600 | |
3601 /* copy these out first because if the username is 32 chars, the next | |
3602 section will overwrite the first byte of the UIC */ | |
3603 retpw.pw_uid = up->uaf$w_mem; | |
3604 retpw.pw_gid = up->uaf$w_grp; | |
3605 | |
3606 /* I suppose this is not the best sytle, to possibly overwrite one | |
3607 byte beyond the end of the field, but what the heck... */ | |
3608 ptr = &up->uaf$t_username[UAF$S_USERNAME]; | |
3609 while (ptr[-1] == ' ') | |
3610 ptr--; | |
3611 *ptr = '\0'; | |
3612 strcpy (retpw.pw_name, up->uaf$t_username); | |
3613 | |
3614 /* the rest of these are counted ascii strings */ | |
3615 strncpy (retpw.pw_gecos, &up->uaf$t_owner[1], up->uaf$t_owner[0]); | |
3616 retpw.pw_gecos[up->uaf$t_owner[0]] = '\0'; | |
3617 strncpy (retpw.pw_dir, &up->uaf$t_defdev[1], up->uaf$t_defdev[0]); | |
3618 retpw.pw_dir[up->uaf$t_defdev[0]] = '\0'; | |
3619 strncat (retpw.pw_dir, &up->uaf$t_defdir[1], up->uaf$t_defdir[0]); | |
3620 retpw.pw_dir[up->uaf$t_defdev[0] + up->uaf$t_defdir[0]] = '\0'; | |
3621 strncpy (retpw.pw_shell, &up->uaf$t_defcli[1], up->uaf$t_defcli[0]); | |
3622 retpw.pw_shell[up->uaf$t_defcli[0]] = '\0'; | |
3623 | |
3624 return &retpw; | |
3625 } | |
3626 #else /* not READ_SYSUAF */ | |
3627 static struct passwd retpw; | |
3628 #endif /* not READ_SYSUAF */ | |
3629 | |
3630 struct passwd * | |
3631 getpwnam (name) | |
3632 char * name; | |
3633 { | |
3634 #ifdef READ_SYSUAF | |
3635 struct UAF *up; | |
3636 #else | |
3637 char * user; | |
3638 char * dir; | |
3639 unsigned char * full; | |
3640 #endif /* READ_SYSUAF */ | |
3641 char *ptr = name; | |
3642 | |
3643 while (*ptr) | |
3644 { | |
3645 if ('a' <= *ptr && *ptr <= 'z') | |
3646 *ptr -= 040; | |
3647 ptr++; | |
3648 } | |
3649 #ifdef READ_SYSUAF | |
3650 if (!(up = get_uaf_name (name))) | |
3651 return 0; | |
3652 return cnv_uaf_pw (up); | |
3653 #else | |
3654 if (strcmp (name, getenv ("USER")) == 0) | |
3655 { | |
3656 retpw.pw_uid = getuid (); | |
3657 retpw.pw_gid = getgid (); | |
3658 strcpy (retpw.pw_name, name); | |
3659 if (full = egetenv ("FULLNAME")) | |
3660 strcpy (retpw.pw_gecos, full); | |
3661 else | |
3662 *retpw.pw_gecos = '\0'; | |
3663 strcpy (retpw.pw_dir, egetenv ("HOME")); | |
3664 *retpw.pw_shell = '\0'; | |
3665 return &retpw; | |
3666 } | |
3667 else | |
3668 return 0; | |
3669 #endif /* not READ_SYSUAF */ | |
3670 } | |
3671 | |
3672 struct passwd * | |
3673 getpwuid (uid) | |
3674 unsigned long uid; | |
3675 { | |
3676 #ifdef READ_SYSUAF | |
3677 struct UAF * up; | |
3678 | |
3679 if (!(up = get_uaf_uic (uid))) | |
3680 return 0; | |
3681 return cnv_uaf_pw (up); | |
3682 #else | |
3683 if (uid == sys_getuid ()) | |
3684 return getpwnam (egetenv ("USER")); | |
3685 else | |
3686 return 0; | |
3687 #endif /* not READ_SYSUAF */ | |
3688 } | |
3689 | |
3690 /* return total address space available to the current process. This is | |
3691 the sum of the current p0 size, p1 size and free page table entries | |
3692 available. */ | |
3693 vlimit () | |
3694 { | |
3695 int item_code; | |
3696 unsigned long free_pages; | |
3697 unsigned long frep0va; | |
3698 unsigned long frep1va; | |
3699 register status; | |
3700 | |
3701 item_code = JPI$_FREPTECNT; | |
3702 if (((status = LIB$GETJPI (&item_code, 0, 0, &free_pages)) & 1) == 0) | |
3703 { | |
3704 errno = EVMSERR; | |
3705 vaxc$errno = status; | |
3706 return -1; | |
3707 } | |
3708 free_pages *= 512; | |
3709 | |
3710 item_code = JPI$_FREP0VA; | |
3711 if (((status = LIB$GETJPI (&item_code, 0, 0, &frep0va)) & 1) == 0) | |
3712 { | |
3713 errno = EVMSERR; | |
3714 vaxc$errno = status; | |
3715 return -1; | |
3716 } | |
3717 item_code = JPI$_FREP1VA; | |
3718 if (((status = LIB$GETJPI (&item_code, 0, 0, &frep1va)) & 1) == 0) | |
3719 { | |
3720 errno = EVMSERR; | |
3721 vaxc$errno = status; | |
3722 return -1; | |
3723 } | |
3724 | |
3725 return free_pages + frep0va + (0x7fffffff - frep1va); | |
3726 } | |
3727 | |
3728 define_logical_name (varname, string) | |
3729 char *varname; | |
3730 char *string; | |
3731 { | |
3732 struct dsc$descriptor_s strdsc = | |
3733 {strlen (string), DSC$K_DTYPE_T, DSC$K_CLASS_S, string}; | |
3734 struct dsc$descriptor_s envdsc = | |
3735 {strlen (varname), DSC$K_DTYPE_T, DSC$K_CLASS_S, varname}; | |
3736 struct dsc$descriptor_s lnmdsc = | |
3737 {7, DSC$K_DTYPE_T, DSC$K_CLASS_S, "LNM$JOB"}; | |
3738 | |
3739 return LIB$SET_LOGICAL (&envdsc, &strdsc, &lnmdsc, 0, 0); | |
3740 } | |
3741 | |
3742 delete_logical_name (varname) | |
3743 char *varname; | |
3744 { | |
3745 struct dsc$descriptor_s envdsc = | |
3746 {strlen (varname), DSC$K_DTYPE_T, DSC$K_CLASS_S, varname}; | |
3747 struct dsc$descriptor_s lnmdsc = | |
3748 {7, DSC$K_DTYPE_T, DSC$K_CLASS_S, "LNM$JOB"}; | |
3749 | |
3750 return LIB$DELETE_LOGICAL (&envdsc, &lnmdsc); | |
3751 } | |
3752 | |
3753 ulimit () | |
3754 {} | |
3755 | |
3756 setpgrp () | |
3757 {} | |
3758 | |
3759 execvp () | |
3760 { | |
3761 error ("execvp system call not implemented"); | |
3762 } | |
3763 | |
3764 int | |
3765 rename (from, to) | |
3766 char *from, *to; | |
3767 { | |
3768 int status; | |
3769 struct FAB from_fab = cc$rms_fab, to_fab = cc$rms_fab; | |
3770 struct NAM from_nam = cc$rms_nam, to_nam = cc$rms_nam; | |
3771 char from_esn[NAM$C_MAXRSS]; | |
3772 char to_esn[NAM$C_MAXRSS]; | |
3773 | |
3774 from_fab.fab$l_fna = from; | |
3775 from_fab.fab$b_fns = strlen (from); | |
3776 from_fab.fab$l_nam = &from_nam; | |
3777 from_fab.fab$l_fop = FAB$M_NAM; | |
3778 | |
3779 from_nam.nam$l_esa = from_esn; | |
3780 from_nam.nam$b_ess = sizeof from_esn; | |
3781 | |
3782 to_fab.fab$l_fna = to; | |
3783 to_fab.fab$b_fns = strlen (to); | |
3784 to_fab.fab$l_nam = &to_nam; | |
3785 to_fab.fab$l_fop = FAB$M_NAM; | |
3786 | |
3787 to_nam.nam$l_esa = to_esn; | |
3788 to_nam.nam$b_ess = sizeof to_esn; | |
3789 | |
3790 status = SYS$RENAME (&from_fab, 0, 0, &to_fab); | |
3791 | |
3792 if (status & 1) | |
3793 return 0; | |
3794 else | |
3795 { | |
3796 if (status == RMS$_DEV) | |
3797 errno = EXDEV; | |
3798 else | |
3799 errno = EVMSERR; | |
3800 vaxc$errno = status; | |
3801 return -1; | |
3802 } | |
3803 } | |
3804 | |
3805 /* This function renames a file like `rename', but it strips | |
3806 the version number from the "to" filename, such that the "to" file is | |
3807 will always be a new version. It also sets the file protection once it is | |
3808 finished. The protection that we will use is stored in fab_final_pro, | |
3809 and was set when we did a creat_copy_attrs to create the file that we | |
3810 are renaming. | |
3811 | |
3812 We could use the chmod function, but Eunichs uses 3 bits per user category | |
3813 to describe the protection, and VMS uses 4 (write and delete are seperate | |
3814 bits). To maintain portability, the VMS implementation of `chmod' wires | |
3815 the W and D bits together. */ | |
3816 | |
3817 | |
3818 static struct fibdef fib; /* We need this initialized to zero */ | |
3819 char vms_file_written[NAM$C_MAXRSS]; | |
3820 | |
3821 int | |
3822 rename_sans_version (from,to) | |
3823 char *from, *to; | |
3824 { | |
3825 short int chan; | |
3826 int stat; | |
3827 short int iosb[4]; | |
3828 int status; | |
3829 struct FAB to_fab = cc$rms_fab; | |
3830 struct NAM to_nam = cc$rms_nam; | |
3831 struct dsc$descriptor fib_d ={sizeof (fib),0,0,(char*) &fib}; | |
3832 struct dsc$descriptor fib_attr[2] | |
3833 = {{sizeof (fab_final_pro),ATR$C_FPRO,0,(char*) &fab_final_pro},{0,0,0,0}}; | |
3834 char to_esn[NAM$C_MAXRSS]; | |
3835 | |
3836 $DESCRIPTOR (disk,to_esn); | |
3837 | |
3838 to_fab.fab$l_fna = to; | |
3839 to_fab.fab$b_fns = strlen (to); | |
3840 to_fab.fab$l_nam = &to_nam; | |
3841 to_fab.fab$l_fop = FAB$M_NAM; | |
3842 | |
3843 to_nam.nam$l_esa = to_esn; | |
3844 to_nam.nam$b_ess = sizeof to_esn; | |
3845 | |
3846 status = SYS$PARSE (&to_fab, 0, 0); /* figure out the full file name */ | |
3847 | |
3848 if (to_nam.nam$l_fnb && NAM$M_EXP_VER) | |
3849 *(to_nam.nam$l_ver) = '\0'; | |
3850 | |
3851 stat = rename (from, to_esn); | |
3852 if (stat < 0) | |
3853 return stat; | |
3854 | |
3855 strcpy (vms_file_written, to_esn); | |
3856 | |
3857 to_fab.fab$l_fna = vms_file_written; /* this points to the versionless name */ | |
3858 to_fab.fab$b_fns = strlen (vms_file_written); | |
3859 | |
3860 /* Now set the file protection to the correct value */ | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3861 SYS$OPEN (&to_fab, 0, 0); /* This fills in the nam$w_fid fields */ |
491 | 3862 |
3863 /* Copy these fields into the fib */ | |
3864 fib.fib$r_fid_overlay.fib$w_fid[0] = to_nam.nam$w_fid[0]; | |
3865 fib.fib$r_fid_overlay.fib$w_fid[1] = to_nam.nam$w_fid[1]; | |
3866 fib.fib$r_fid_overlay.fib$w_fid[2] = to_nam.nam$w_fid[2]; | |
3867 | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3868 SYS$CLOSE (&to_fab, 0, 0); |
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3869 |
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3870 stat = SYS$ASSIGN (&disk, &chan, 0, 0); /* open a channel to the disk */ |
491 | 3871 if (!stat) |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3872 LIB$SIGNAL (stat); |
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3873 stat = SYS$QIOW (0, chan, IO$_MODIFY, iosb, 0, 0, &fib_d, |
491 | 3874 0, 0, 0, &fib_attr, 0); |
3875 if (!stat) | |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3876 LIB$SIGNAL (stat); |
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3877 stat = SYS$DASSGN (chan); |
491 | 3878 if (!stat) |
1596
0e105bd23f44
* systty.h, process.c, buffer.h, callproc.c, sysdep.c, dired.c:
Jim Blandy <jimb@redhat.com>
parents:
1570
diff
changeset
|
3879 LIB$SIGNAL (stat); |
766 | 3880 strcpy (vms_file_written, to_esn); /* We will write this to the terminal*/ |
491 | 3881 return 0; |
3882 } | |
3883 | |
3884 link (file, new) | |
3885 char * file, * new; | |
3886 { | |
3887 register status; | |
3888 struct FAB fab; | |
3889 struct NAM nam; | |
3890 unsigned short fid[3]; | |
3891 char esa[NAM$C_MAXRSS]; | |
3892 | |
3893 fab = cc$rms_fab; | |
3894 fab.fab$l_fop = FAB$M_OFP; | |
3895 fab.fab$l_fna = file; | |
3896 fab.fab$b_fns = strlen (file); | |
3897 fab.fab$l_nam = &nam; | |
3898 | |
3899 nam = cc$rms_nam; | |
3900 nam.nam$l_esa = esa; | |
3901 nam.nam$b_ess = NAM$C_MAXRSS; | |
3902 | |
3903 status = SYS$PARSE (&fab); | |
3904 if ((status & 1) == 0) | |
3905 { | |
3906 errno = EVMSERR; | |
3907 vaxc$errno = status; | |
3908 return -1; | |
3909 } | |
3910 status = SYS$SEARCH (&fab); | |
3911 if ((status & 1) == 0) | |
3912 { | |
3913 errno = EVMSERR; | |
3914 vaxc$errno = status; | |
3915 return -1; | |
3916 } | |
3917 | |
3918 fid[0] = nam.nam$w_fid[0]; | |
3919 fid[1] = nam.nam$w_fid[1]; | |
3920 fid[2] = nam.nam$w_fid[2]; | |
3921 | |
3922 fab.fab$l_fna = new; | |
3923 fab.fab$b_fns = strlen (new); | |
3924 | |
3925 status = SYS$PARSE (&fab); | |
3926 if ((status & 1) == 0) | |
3927 { | |
3928 errno = EVMSERR; | |
3929 vaxc$errno = status; | |
3930 return -1; | |
3931 } | |
3932 | |
3933 nam.nam$w_fid[0] = fid[0]; | |
3934 nam.nam$w_fid[1] = fid[1]; | |
3935 nam.nam$w_fid[2] = fid[2]; | |
3936 | |
3937 nam.nam$l_esa = nam.nam$l_name; | |
3938 nam.nam$b_esl = nam.nam$b_name + nam.nam$b_type + nam.nam$b_ver; | |
3939 | |
3940 status = SYS$ENTER (&fab); | |
3941 if ((status & 1) == 0) | |
3942 { | |
3943 errno = EVMSERR; | |
3944 vaxc$errno = status; | |
3945 return -1; | |
3946 } | |
3947 | |
3948 return 0; | |
3949 } | |
3950 | |
3951 croak (badfunc) | |
3952 char *badfunc; | |
3953 { | |
3954 printf ("%s not yet implemented\r\n", badfunc); | |
3955 reset_sys_modes (); | |
3956 exit (1); | |
3957 } | |
3958 | |
3959 long | |
3960 random () | |
3961 { | |
3962 /* Arrange to return a range centered on zero. */ | |
3963 return rand () - (1 << 30); | |
3964 } | |
3965 | |
3966 srandom (seed) | |
3967 { | |
3968 srand (seed); | |
3969 } | |
3970 #endif /* VMS */ | |
3971 | |
3972 #ifdef AIX | |
3973 | |
3974 /* Called from init_sys_modes. */ | |
3975 hft_init () | |
3976 { | |
3977 int junk; | |
3978 | |
3979 /* If we're not on an HFT we shouldn't do any of this. We determine | |
3980 if we are on an HFT by trying to get an HFT error code. If this | |
3981 call fails, we're not on an HFT. */ | |
3982 #ifdef IBMR2AIX | |
3983 if (ioctl (0, HFQERROR, &junk) < 0) | |
3984 return; | |
3985 #else /* not IBMR2AIX */ | |
3986 if (ioctl (0, HFQEIO, 0) < 0) | |
3987 return; | |
3988 #endif /* not IBMR2AIX */ | |
3989 | |
3990 /* On AIX the default hft keyboard mapping uses backspace rather than delete | |
3991 as the rubout key's ASCII code. Here this is changed. The bug is that | |
3992 there's no way to determine the old mapping, so in reset_sys_modes | |
3993 we need to assume that the normal map had been present. Of course, this | |
3994 code also doesn't help if on a terminal emulator which doesn't understand | |
3995 HFT VTD's. */ | |
3996 { | |
3997 struct hfbuf buf; | |
3998 struct hfkeymap keymap; | |
3999 | |
4000 buf.hf_bufp = (char *)&keymap; | |
4001 buf.hf_buflen = sizeof (keymap); | |
4002 keymap.hf_nkeys = 2; | |
4003 keymap.hfkey[0].hf_kpos = 15; | |
4004 keymap.hfkey[0].hf_kstate = HFMAPCHAR | HFSHFNONE; | |
4005 #ifdef IBMR2AIX | |
4006 keymap.hfkey[0].hf_keyidh = '<'; | |
4007 #else /* not IBMR2AIX */ | |
4008 keymap.hfkey[0].hf_page = '<'; | |
4009 #endif /* not IBMR2AIX */ | |
4010 keymap.hfkey[0].hf_char = 127; | |
4011 keymap.hfkey[1].hf_kpos = 15; | |
4012 keymap.hfkey[1].hf_kstate = HFMAPCHAR | HFSHFSHFT; | |
4013 #ifdef IBMR2AIX | |
4014 keymap.hfkey[1].hf_keyidh = '<'; | |
4015 #else /* not IBMR2AIX */ | |
4016 keymap.hfkey[1].hf_page = '<'; | |
4017 #endif /* not IBMR2AIX */ | |
4018 keymap.hfkey[1].hf_char = 127; | |
4019 hftctl (0, HFSKBD, &buf); | |
4020 } | |
4021 /* The HFT system on AIX doesn't optimize for scrolling, so it's really ugly | |
4022 at times. */ | |
4023 line_ins_del_ok = char_ins_del_ok = 0; | |
4024 } | |
4025 | |
4026 /* Reset the rubout key to backspace. */ | |
4027 | |
4028 hft_reset () | |
4029 { | |
4030 struct hfbuf buf; | |
4031 struct hfkeymap keymap; | |
4032 int junk; | |
4033 | |
4034 #ifdef IBMR2AIX | |
4035 if (ioctl (0, HFQERROR, &junk) < 0) | |
4036 return; | |
4037 #else /* not IBMR2AIX */ | |
4038 if (ioctl (0, HFQEIO, 0) < 0) | |
4039 return; | |
4040 #endif /* not IBMR2AIX */ | |
4041 | |
4042 buf.hf_bufp = (char *)&keymap; | |
4043 buf.hf_buflen = sizeof (keymap); | |
4044 keymap.hf_nkeys = 2; | |
4045 keymap.hfkey[0].hf_kpos = 15; | |
4046 keymap.hfkey[0].hf_kstate = HFMAPCHAR | HFSHFNONE; | |
4047 #ifdef IBMR2AIX | |
4048 keymap.hfkey[0].hf_keyidh = '<'; | |
4049 #else /* not IBMR2AIX */ | |
4050 keymap.hfkey[0].hf_page = '<'; | |
4051 #endif /* not IBMR2AIX */ | |
4052 keymap.hfkey[0].hf_char = 8; | |
4053 keymap.hfkey[1].hf_kpos = 15; | |
4054 keymap.hfkey[1].hf_kstate = HFMAPCHAR | HFSHFSHFT; | |
4055 #ifdef IBMR2AIX | |
4056 keymap.hfkey[1].hf_keyidh = '<'; | |
4057 #else /* not IBMR2AIX */ | |
4058 keymap.hfkey[1].hf_page = '<'; | |
4059 #endif /* not IBMR2AIX */ | |
4060 keymap.hfkey[1].hf_char = 8; | |
4061 hftctl (0, HFSKBD, &buf); | |
4062 } | |
4063 | |
4064 #endif /* AIX */ |