annotate lisp/dired.el @ 87826:06bebff4deab

Add a TODO note about vc-state. (vc-next-action): Register 'unregistered and 'ignored files. Use when and unless instead of if where appropriate. (vc-start-entry): Fix typo. (vc-status): Autoload it.

;;; dired.el --- directory-browsing commands

;; Copyright (C) 1985, 1986, 1992, 1993, 1994, 1995, 1996, 1997, 2000,
;;   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.

;; Author: Sebastian Kremer <[e-mail]>
;; Maintainer: FSF
;; Keywords: files

;; This file is part of GNU Emacs.

;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 3, or (at your option)
;; any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING.  If not, write to the
;; Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
;; Boston, MA 02110-1301, USA.

;;; Commentary:

;; This is a major mode for directory browsing and editing.  It is
;; documented in the Emacs manual.

;; Rewritten in 1990/1991 to add tree features, file marking and
;; sorting by Sebastian Kremer <[e-mail]>.
;; Finished up by rms in 1992.

;;; Code:

;;; Customizable variables

(defgroup dired nil
  "Directory editing."
  :link '(custom-manual "(emacs)Dired")
  :group 'files)

(defgroup dired-mark nil
  "Handling marks in Dired."
  :prefix "dired-"
  :group 'dired)


;;;###autoload
(defcustom dired-listing-switches "-al"
  "*Switches passed to `ls' for Dired.  MUST contain the `l' option.
May contain all other options that don't contradict `-l';
may contain even `F', `b', `i' and `s'.  See also the variable
`dired-ls-F-marks-symlinks' concerning the `F' switch.
On systems such as MS-DOS and MS-Windows, which use `ls' emulation in Lisp,
some of the `ls' switches are not supported; see the doc string of
`insert-directory' in `ls-lisp.el' for more details."
  :type 'string
  :group 'dired)

(defvar dired-subdir-switches nil
  "If non-nil, switches passed to `ls' for inserting subdirectories.
If nil, `dired-listing-switches' is used.")

; Don't use absolute file names as /bin should be in any PATH and people
; may prefer /usr/local/gnu/bin or whatever.  However, chown is
; usually not in PATH.

;;;###autoload
(defvar dired-chown-program
  (if (memq system-type '(hpux usg-unix-v irix linux gnu/linux cygwin))
      "chown"
    (if (file-exists-p "/usr/sbin/chown")
	"/usr/sbin/chown"
      "/etc/chown"))
  "Name of chown command (usually `chown' or `/etc/chown').")

(defvar dired-use-ls-dired (not (not (string-match "gnu" system-configuration)))
  "Non-nil means Dired should use `ls --dired'.")

(defvar dired-chmod-program "chmod"
  "Name of chmod command (usually `chmod').")

(defvar dired-touch-program "touch"
  "Name of touch command (usually `touch').")

;;;###autoload
(defcustom dired-ls-F-marks-symlinks nil
  "*Informs Dired about how `ls -lF' marks symbolic links.
Set this to t if `ls' (or whatever program is specified by
`insert-directory-program') with `-lF' marks the symbolic link
itself with a trailing @ (usually the case under Ultrix).

Example: if `ln -s foo bar; ls -F bar' gives `bar -> foo', set it to
nil (the default), if it gives `bar@ -> foo', set it to t.

Dired checks if there is really a @ appended.  Thus, if you have a
marking `ls' program on one host and a non-marking on another host, and
don't care about symbolic links which really end in a @, you can
always set this variable to t."
  :type 'boolean
  :group 'dired-mark)

;;;###autoload
(defcustom dired-trivial-filenames "^\\.\\.?$\\|^#"
  "*Regexp of files to skip when finding first file of a directory.
A value of nil means move to the subdir line.
A value of t means move to first file."
  :type '(choice (const :tag "Move to subdir" nil)
		 (const :tag "Move to first" t)
		 regexp)
  :group 'dired)

;;;###autoload
(defcustom dired-keep-marker-rename t
  ;; Use t as default so that moved files "take their markers with them".
  "*Controls marking of renamed files.
If t, files keep their previous marks when they are renamed.
If a character, renamed files (whether previously marked or not)
are afterward marked with that character."
  :type '(choice (const :tag "Keep" t)
		 (character :tag "Mark"))
  :group 'dired-mark)

;;;###autoload
(defcustom dired-keep-marker-copy ?C
  "*Controls marking of copied files.
If t, copied files are marked if and as the corresponding original files were.
If a character, copied files are unconditionally marked with that character."
  :type '(choice (const :tag "Keep" t)
		 (character :tag "Mark"))
  :group 'dired-mark)

;;;###autoload
(defcustom dired-keep-marker-hardlink ?H
  "*Controls marking of newly made hard links.
If t, they are marked if and as the files linked to were marked.
If a character, new links are unconditionally marked with that character."
  :type '(choice (const :tag "Keep" t)
		 (character :tag "Mark"))
  :group 'dired-mark)

;;;###autoload
(defcustom dired-keep-marker-symlink ?Y
  "*Controls marking of newly made symbolic links.
If t, they are marked if and as the files linked to were marked.
If a character, new links are unconditionally marked with that character."
  :type '(choice (const :tag "Keep" t)
		 (character :tag "Mark"))
  :group 'dired-mark)

;;;###autoload
(defcustom dired-dwim-target nil
  "*If non-nil, Dired tries to guess a default target directory.
This means: if there is a dired buffer displayed in the next window,
use its current subdir, instead of the current subdir of this dired buffer.

The target is used in the prompt for file copy, rename etc."
  :type 'boolean
  :group 'dired)

;;;###autoload
(defcustom dired-copy-preserve-time t
  "*If non-nil, Dired preserves the last-modified time in a file copy.
\(This works on only some systems.)"
  :type 'boolean
  :group 'dired)

; These variables were deleted and the replacements are on files.el.
; We leave aliases behind for back-compatibility.
(defvaralias 'dired-free-space-program 'directory-free-space-program)
(defvaralias 'dired-free-space-args 'directory-free-space-args)

;;; Hook variables

(defcustom dired-load-hook nil
  "Run after loading Dired.
You can customize key bindings or load extensions with this."
  :group 'dired
  :type 'hook)

(defcustom dired-mode-hook nil
  "Run at the very end of `dired-mode'."
  :group 'dired
  :type 'hook)

(defcustom dired-before-readin-hook nil
  "This hook is run before a dired buffer is read in (created or reverted)."
  :group 'dired
  :type 'hook)

(defcustom dired-after-readin-hook nil
  "Hook run after each time a file or directory is read by Dired.
After each listing of a file or directory, this hook is run
with the buffer narrowed to the listing."
  :group 'dired
  :type 'hook)
;; Note this can't simply be run inside function `dired-ls' as the hook
;; functions probably depend on the dired-subdir-alist to be OK.

(defcustom dired-dnd-protocol-alist
  '(("^file:///" . dired-dnd-handle-local-file)
    ("^file://"  . dired-dnd-handle-file)
    ("^file:"    . dired-dnd-handle-local-file))
  "The functions to call when a drop in `dired-mode' is made.
See `dnd-protocol-alist' for more information.  When nil, behave
as in other buffers.  Changing this option is effective only for
new dired buffers."
  :type '(choice (repeat (cons (regexp) (function)))
		 (const :tag "Behave as in other buffers" nil))
  :version "22.1"
  :group 'dired)

;; Internal variables

(defvar dired-marker-char ?*		; the answer is 42
  ;; so that you can write things like
  ;; (let ((dired-marker-char ?X))
  ;;    ;; great code using X markers ...
  ;;    )
  ;; For example, commands operating on two sets of files, A and B.
  ;; Or marking files with digits 0-9.  This could implicate
  ;; concentric sets or an order for the marked files.
  ;; The code depends on dynamic scoping on the marker char.
  "In Dired, the current mark character.
This is what the do-commands look for, and what the mark-commands store.")

(defvar dired-del-marker ?D
  "Character used to flag files for deletion.")

(defvar dired-shrink-to-fit t
;; I see no reason ever to make this nil -- rms.
;;  (> baud-rate search-slow-speed)
  "Non-nil means Dired shrinks the display buffer to fit the marked files.")

(defvar dired-flagging-regexp nil);; Last regexp used to flag files.

(defvar dired-file-version-alist)

;;;###autoload
(defvar dired-directory nil
  "The directory name or wildcard spec that this dired directory lists.
Local to each dired buffer.  May be a list, in which case the car is the
directory name and the cdr is the list of files to mention.
The directory name must be absolute, but need not be fully expanded.")

(defvar dired-actual-switches nil
  "The value of `dired-listing-switches' used to make this buffer's text.")

(defvar dired-re-inode-size "[0-9 \t]*"
  "Regexp for optional initial inode and file size as made by `ls -i -s'.")

;; These regexps must be tested at beginning-of-line, but are also
;; used to search for next matches, so neither omitting "^" nor
;; replacing "^" by "\n" (to make it slightly faster) will work.

(defvar dired-re-mark "^[^ \n]")
;; "Regexp matching a marked line.
;; Important: the match ends just after the marker."
(defvar dired-re-maybe-mark "^. ")
;; The [^:] part after "d" and "l" is to avoid confusion with the
;; DOS/Windows-style drive letters in directory names, like in "d:/foo".
(defvar dired-re-dir (concat dired-re-maybe-mark dired-re-inode-size "d[^:]"))
(defvar dired-re-sym (concat dired-re-maybe-mark dired-re-inode-size "l[^:]"))
(defvar dired-re-exe;; match ls permission string of an executable file
  (mapconcat (function
	      (lambda (x)
		(concat dired-re-maybe-mark dired-re-inode-size x)))
	     '("-[-r][-w][xs][-r][-w].[-r][-w]."
	       "-[-r][-w].[-r][-w][xs][-r][-w]."
	       "-[-r][-w].[-r][-w].[-r][-w][xst]")
	     "\\|"))
(defvar dired-re-perms "[-bcdlps][-r][-w].[-r][-w].[-r][-w].")
(defvar dired-re-dot "^.* \\.\\.?/?$")

;; The subdirectory names in the next two lists are expanded.
(defvar dired-subdir-alist nil
  "Association list of subdirectories and their buffer positions.
Each subdirectory has an element: (DIRNAME . STARTMARKER).
The order of elements is the reverse of the order in the buffer.
In simple cases, this list contains one element.")

(defvar dired-switches-alist nil
  "Keeps track of which switches to use for inserted subdirectories.
This is an alist of the form (SUBDIR . SWITCHES).")
(make-variable-buffer-local 'dired-switches-alist)

(defvaralias 'dired-move-to-filename-regexp
  'directory-listing-before-filename-regexp)

(defvar dired-subdir-regexp "^. \\([^\n\r]+\\)\\(:\\)[\n\r]"
  "Regexp matching a maybe hidden subdirectory line in `ls -lR' output.
Subexpression 1 is the subdirectory proper, no trailing colon.
The match starts at the beginning of the line and ends after the end
of the line (\\n or \\r).
Subexpression 2 must end right before the \\n or \\r.")

(defgroup dired-faces nil
  "Faces used by Dired."
  :group 'dired
  :group 'faces)

(defface dired-header
  '((t (:inherit font-lock-type-face)))
  "Face used for directory headers."
  :group 'dired-faces
  :version "22.1")
(defvar dired-header-face 'dired-header
  "Face name used for directory headers.")

(defface dired-mark
  '((t (:inherit font-lock-constant-face)))
  "Face used for dired marks."
  :group 'dired-faces
  :version "22.1")
(defvar dired-mark-face 'dired-mark
  "Face name used for dired marks.")

(defface dired-marked
  '((t (:inherit font-lock-warning-face)))
  "Face used for marked files."
  :group 'dired-faces
  :version "22.1")
(defvar dired-marked-face 'dired-marked
  "Face name used for marked files.")

(defface dired-flagged
  '((t (:inherit font-lock-warning-face)))
  "Face used for flagged files."
  :group 'dired-faces
  :version "22.1")
(defvar dired-flagged-face 'dired-flagged
  "Face name used for flagged files.")

(defface dired-warning
  ;; Inherit from font-lock-warning-face since with min-colors 8
  ;; font-lock-comment-face is not colored any more.
  '((t (:inherit font-lock-warning-face)))
  "Face used to highlight a part of a buffer that needs user attention."
  :group 'dired-faces
  :version "22.1")
(defvar dired-warning-face 'dired-warning
  "Face name used for a part of a buffer that needs user attention.")

(defface dired-warn-writable
  '((((type w32 pc)) :inherit default)  ;; These default to rw-rw-rw.
    (t (:inherit font-lock-warning-face)))
  "Face used to highlight permissions of group- and world-writable files."
  :group 'dired-faces
  :version "22.2")
(defvar dired-warn-writable-face 'dired-warn-writable
  "Face name used for permissions of group- and world-writable files.")

(defface dired-directory
  '((t (:inherit font-lock-function-name-face)))
  "Face used for subdirectories."
  :group 'dired-faces
  :version "22.1")
(defvar dired-directory-face 'dired-directory
  "Face name used for subdirectories.")

(defface dired-symlink
  '((t (:inherit font-lock-keyword-face)))
  "Face used for symbolic links."
  :group 'dired-faces
  :version "22.1")
(defvar dired-symlink-face 'dired-symlink
  "Face name used for symbolic links.")

(defface dired-ignored
  '((t (:inherit shadow)))
  "Face used for files suffixed with `completion-ignored-extensions'."
  :group 'dired-faces
  :version "22.1")
(defvar dired-ignored-face 'dired-ignored
  "Face name used for files suffixed with `completion-ignored-extensions'.")

(defvar dired-font-lock-keywords
  (list
   ;;
   ;; Directory headers.
   (list dired-subdir-regexp '(1 dired-header-face))
   ;;
   ;; Dired marks.
   (list dired-re-mark '(0 dired-mark-face))
   ;;
   ;; We make heavy use of MATCH-ANCHORED, since the regexps don't identify the
   ;; file name itself.  We search for Dired defined regexps, and then use the
   ;; Dired defined function `dired-move-to-filename' before searching for the
   ;; simple regexp ".+".  It is that regexp which matches the file name.
   ;;
   ;; Marked files.
   (list (concat "^[" (char-to-string dired-marker-char) "]")
         '(".+" (dired-move-to-filename) nil (0 dired-marked-face)))
   ;;
   ;; Flagged files.
   (list (concat "^[" (char-to-string dired-del-marker) "]")
         '(".+" (dired-move-to-filename) nil (0 dired-flagged-face)))
   ;; People who are paranoid about security would consider this more
   ;; important than other things such as whether it is a directory.
   ;; But we don't want to encourage paranoia, so our default
   ;; should be what's most useful for non-paranoids. -- rms.
;;;   ;;
;;;   ;; Files that are group or world writable.
;;;   (list (concat dired-re-maybe-mark dired-re-inode-size
;;;		 "\\([-d]\\(....w....\\|.......w.\\)\\)")
;;;	 '(1 dired-warning-face)
;;;	 '(".+" (dired-move-to-filename) nil (0 dired-warning-face)))
   ;; However, we don't need to highlight the file name, only the
   ;; permissions, to win generally.  -- fx.
   ;; Fixme: we could also put text properties on the permission
   ;; fields with keymaps to frob the permissions, somewhat a la XEmacs.
   (list (concat dired-re-maybe-mark dired-re-inode-size
		 "[-d]....\\(w\\)....")	; group writable
	 '(1 dired-warn-writable-face))
   (list (concat dired-re-maybe-mark dired-re-inode-size
		 "[-d].......\\(w\\).")	; world writable
	 '(1 dired-warn-writable-face))
   ;;
   ;; Subdirectories.
   (list dired-re-dir
	 '(".+" (dired-move-to-filename) nil (0 dired-directory-face)))
   ;;
   ;; Symbolic links.
   (list dired-re-sym
	 '(".+" (dired-move-to-filename) nil (0 dired-symlink-face)))
   ;;
   ;; Files suffixed with `completion-ignored-extensions'.
   '(eval .
     ;; It is quicker to first find just an extension, then go back to the
     ;; start of that file name.  So we do this complex MATCH-ANCHORED form.
     (list (concat "\\(" (regexp-opt completion-ignored-extensions) "\\|#\\)$")
	   '(".+" (dired-move-to-filename) nil (0 dired-ignored-face))))
   ;;
   ;; Files suffixed with `completion-ignored-extensions'
   ;; plus a character put in by -F.
   '(eval .
     (list (concat "\\(" (regexp-opt completion-ignored-extensions)
		   "\\|#\\)[*=|]$")
	   '(".+" (progn
		    (end-of-line)
		    ;; If the last character is not part of the filename,
		    ;; move back to the start of the filename
		    ;; so it can be fontified.
		    ;; Otherwise, leave point at the end of the line;
		    ;; that way, nothing is fontified.
		    (unless (get-text-property (1- (point)) 'mouse-face)
		      (dired-move-to-filename)))
	     nil (0 dired-ignored-face))))
)
  "Additional expressions to highlight in Dired mode.")

(defvar dnd-protocol-alist)

;;; Macros must be defined before they are used, for the byte compiler.

(defmacro dired-mark-if (predicate msg)
  "Mark all files for which PREDICATE evals to non-nil.
PREDICATE is evaluated on each line, with point at beginning of line.
MSG is a noun phrase for the type of files being marked.
It should end with a noun that can be pluralized by adding `s'.
Return value is the number of files marked, or nil if none were marked."
  `(let (buffer-read-only count)
    (save-excursion
      (setq count 0)
      (if ,msg (message "Marking %ss..." ,msg))
      (goto-char (point-min))
      (while (not (eobp))
        (if ,predicate
            (progn
              (delete-char 1)
              (insert dired-marker-char)
              (setq count (1+ count))))
        (forward-line 1))
      (if ,msg (message "%s %s%s %s%s."
                        count
                        ,msg
                        (dired-plural-s count)
                        (if (eq dired-marker-char ?\040) "un" "")
                        (if (eq dired-marker-char dired-del-marker)
                            "flagged" "marked"))))
    (and (> count 0) count)))

(defmacro dired-map-over-marks (body arg &optional show-progress
				     distinguish-one-marked)
  "Eval BODY with point on each marked line.  Return a list of BODY's results.
If no marked file could be found, execute BODY on the current line.
  If ARG is an integer, use the next ARG (or previous -ARG, if ARG<0)
  files instead of the marked files.
  In that case point is dragged along.  This is so that commands on
  the next ARG (instead of the marked) files can be chained easily.
  If ARG is otherwise non-nil, use current file instead.
If optional third arg SHOW-PROGRESS evaluates to non-nil,
  redisplay the dired buffer after each file is processed.
No guarantee is made about the position on the marked line.
  BODY must ensure this itself if it depends on this.
Search starts at the beginning of the buffer, thus the car of the list
  corresponds to the line nearest to the buffer's bottom.  This
  is also true for (positive and negative) integer values of ARG.
BODY should not be too long as it is expanded four times.

If DISTINGUISH-ONE-MARKED is non-nil, then if we find just one marked file,
return (t FILENAME) instead of (FILENAME)."
  ;;
  ;;Warning: BODY must not add new lines before point - this may cause an
  ;;endless loop.
  ;;This warning should not apply any longer, sk  2-Sep-1991 14:10.
  `(prog1
       (let (buffer-read-only case-fold-search found results)
	 (if ,arg
	     (if (integerp ,arg)
		 (progn	;; no save-excursion, want to move point.
		   (dired-repeat-over-lines
		    ,arg
		    (function (lambda ()
				(if ,show-progress (sit-for 0))
				(setq results (cons ,body results)))))
		   (if (< ,arg 0)
		       (nreverse results)
		     results))
	       ;; non-nil, non-integer ARG means use current file:
	       (list ,body))
	   (let ((regexp (dired-marker-regexp)) next-position)
	     (save-excursion
	       (goto-char (point-min))
	       ;; remember position of next marked file before BODY
	       ;; can insert lines before the just found file,
	       ;; confusing us by finding the same marked file again
	       ;; and again and...
	       (setq next-position (and (re-search-forward regexp nil t)
					(point-marker))
		     found (not (null next-position)))
	       (while next-position
		 (goto-char next-position)
		 (if ,show-progress (sit-for 0))
		 (setq results (cons ,body results))
		 ;; move after last match
		 (goto-char next-position)
		 (forward-line 1)
		 (set-marker next-position nil)
		 (setq next-position (and (re-search-forward regexp nil t)
					  (point-marker)))))
	     (if (and ,distinguish-one-marked (= (length results) 1))
		 (setq results (cons t results)))
	     (if found
		 results
	       (list ,body)))))
     ;; save-excursion loses, again
     (dired-move-to-filename)))

(defun dired-get-marked-files (&optional localp arg filter distinguish-one-marked)
  "Return the marked files' names as list of strings.
The list is in the same order as the buffer, that is, the car is the
  first marked file.
Values returned are normally absolute file names.
Optional arg LOCALP as in `dired-get-filename'.
Optional second argument ARG specifies files near point
 instead of marked files.  If ARG is an integer, use the next ARG files.
  If ARG is otherwise non-nil, use file.  Usually ARG comes from
  the command's prefix arg.
Optional third argument FILTER, if non-nil, is a function to select
  some of the files--those for which (funcall FILTER FILENAME) is non-nil.

If DISTINGUISH-ONE-MARKED is non-nil, then if we find just one marked file,
return (t FILENAME) instead of (FILENAME).
Don't use that together with FILTER."
  (let* ((all-of-them
	  (save-excursion
	    (dired-map-over-marks
	     (dired-get-filename localp)
	     arg nil distinguish-one-marked)))
	 result)
    (if (not filter)
	(if (and distinguish-one-marked (eq (car all-of-them) t))
	    all-of-them
	  (nreverse all-of-them))
      (dolist (file all-of-them)
	(if (funcall filter file)
	    (push file result)))
      result)))

;; The dired command

(defun dired-read-dir-and-switches (str)
  ;; For use in interactive.
  (reverse (list
	    (if current-prefix-arg
		(read-string "Dired listing switches: "
			     dired-listing-switches))
	    ;; If a dialog is about to be used, call read-directory-name so
	    ;; the dialog code knows we want directories.  Some dialogs can
	    ;; only select directories or files when popped up, not both.
	    (if (next-read-file-uses-dialog-p)
		(read-directory-name (format "Dired %s(directory): " str)
				     nil default-directory nil)
	      (let ((default (and buffer-file-name
				  (abbreviate-file-name buffer-file-name))))
		(minibuffer-with-setup-hook
		    (lambda () (setq minibuffer-default default))
		  (read-file-name (format "Dired %s(directory): " str)
				  nil default-directory nil)))))))

;;;###autoload (define-key ctl-x-map "d" 'dired)
;;;###autoload
(defun dired (dirname &optional switches)
  "\"Edit\" directory DIRNAME--delete, rename, print, etc. some files in it.
Optional second argument SWITCHES specifies the `ls' options used.
\(Interactively, use a prefix argument to be able to specify SWITCHES.)
Dired displays a list of files in DIRNAME (which may also have
shell wildcards appended to select certain files).  If DIRNAME is a cons,
its first element is taken as the directory name and the rest as an explicit
list of files to make directory entries for.
\\<dired-mode-map>\
You can move around in it with the usual commands.
You can flag files for deletion with \\[dired-flag-file-deletion] and then
delete them by typing \\[dired-do-flagged-delete].
Type \\[describe-mode] after entering Dired for more info.

If DIRNAME is already in a dired buffer, that buffer is used without refresh."
  ;; Cannot use (interactive "D") because of wildcards.
  (interactive (dired-read-dir-and-switches ""))
  (switch-to-buffer (dired-noselect dirname switches)))

;;;###autoload (define-key ctl-x-4-map "d" 'dired-other-window)
;;;###autoload
(defun dired-other-window (dirname &optional switches)
  "\"Edit\" directory DIRNAME.  Like `dired' but selects in another window."
  (interactive (dired-read-dir-and-switches "in other window "))
  (switch-to-buffer-other-window (dired-noselect dirname switches)))

;;;###autoload (define-key ctl-x-5-map "d" 'dired-other-frame)
;;;###autoload
(defun dired-other-frame (dirname &optional switches)
  "\"Edit\" directory DIRNAME.  Like `dired' but makes a new frame."
  (interactive (dired-read-dir-and-switches "in other frame "))
  (switch-to-buffer-other-frame (dired-noselect dirname switches)))

;;;###autoload
(defun dired-noselect (dir-or-list &optional switches)
  "Like `dired' but returns the dired buffer as value, does not select it."
  (or dir-or-list (setq dir-or-list default-directory))
  ;; This loses the distinction between "/foo/*/" and "/foo/*" that
  ;; some shells make:
  (let (dirname initially-was-dirname)
    (if (consp dir-or-list)
	(setq dirname (car dir-or-list))
      (setq dirname dir-or-list))
    (setq initially-was-dirname
	  (string= (file-name-as-directory dirname) dirname))
    (setq dirname (abbreviate-file-name
		   (expand-file-name (directory-file-name dirname))))
    (if find-file-visit-truename
	(setq dirname (file-truename dirname)))
    ;; If the argument was syntactically  a directory name not a file name,
    ;; or if it happens to name a file that is a directory,
    ;; convert it syntactically to a directory name.
    ;; The reason for checking initially-was-dirname
    ;; and not just file-directory-p
    ;; is that file-directory-p is slow over ftp.
    (if (or initially-was-dirname (file-directory-p dirname))
	(setq dirname  (file-name-as-directory dirname)))
    (if (consp dir-or-list)
	(setq dir-or-list (cons dirname (cdr dir-or-list)))
      (setq dir-or-list dirname))
    (dired-internal-noselect dir-or-list switches)))

;; The following is an internal dired function.  It returns non-nil if
;; the directory visited by the current dired buffer has changed on
;; disk.  DIRNAME should be the directory name of that directory.
(defun dired-directory-changed-p (dirname)
  (not (let ((attributes (file-attributes dirname))
	     (modtime (visited-file-modtime)))
	 (or (eq modtime 0)
	     (not (eq (car attributes) t))
	     (equal (nth 5 attributes) modtime)))))

(defun dired-buffer-stale-p (&optional noconfirm)
  "Return non-nil if current dired buffer needs updating.
If NOCONFIRM is non-nil, then this function always returns nil
for a remote directory.  This feature is used by Auto Revert Mode."
  (let ((dirname
	 (if (consp dired-directory) (car dired-directory) dired-directory)))
    (and (stringp dirname)
	 (not (when noconfirm (file-remote-p dirname)))
	 (file-readable-p dirname)
	 (dired-directory-changed-p dirname))))

;; Separate function from dired-noselect for the sake of dired-vms.el.
(defun dired-internal-noselect (dir-or-list &optional switches mode)
  ;; If there is an existing dired buffer for DIRNAME, just leave
  ;; buffer as it is (don't even call dired-revert).
  ;; This saves time especially for deep trees or with ange-ftp.
  ;; The user can type `g' easily, and it is more consistent with find-file.
  ;; But if SWITCHES are given they are probably different from the
  ;; buffer's old value, so call dired-sort-other, which does
  ;; revert the buffer.
  ;; A pity we can't possibly do "Directory has changed - refresh? "
  ;; like find-file does.
  ;; Optional argument MODE is passed to dired-find-buffer-nocreate,
  ;; see there.
  (let* (dirname
	 buffer
	 ;; note that buffer already is in dired-mode, if found
	 new-buffer-p
	 (old-buf (current-buffer)))
    (if (consp dir-or-list)
	(setq dirname (car dir-or-list))
      (setq dirname dir-or-list))
    ;; Look for an existing buffer.
    (setq buffer (dired-find-buffer-nocreate dirname mode)
	  new-buffer-p (null buffer))
    (or buffer
	(let ((default-major-mode 'fundamental-mode))
	  ;; We don't want default-major-mode to run hooks and set auto-fill
	  ;; or whatever, now that dired-mode does not
	  ;; kill-all-local-variables any longer.
	  (setq buffer (create-file-buffer (directory-file-name dirname)))))
    (set-buffer buffer)
    (if (not new-buffer-p)		; existing buffer ...
	(cond (switches			; ... but new switches
	       ;; file list may have changed
	       (setq dired-directory dir-or-list)
	       ;; this calls dired-revert
	       (dired-sort-other switches))
	      ;; If directory has changed on disk, offer to revert.
	      ((when (dired-directory-changed-p dirname)
		 (message "%s"
			  (substitute-command-keys
			   "Directory has changed on disk; type \\[revert-buffer] to update Dired")))))
      ;; Else a new buffer
      (setq default-directory
	    ;; We can do this unconditionally
	    ;; because dired-noselect ensures that the name
	    ;; is passed in directory name syntax
	    ;; if it was the name of a directory at all.
	    (file-name-directory dirname))
      (or switches (setq switches dired-listing-switches))
      (if mode (funcall mode)
        (dired-mode dir-or-list switches))
      ;; default-directory and dired-actual-switches are set now
      ;; (buffer-local), so we can call dired-readin:
      (let ((failed t))
	(unwind-protect
	    (progn (dired-readin)
		   (setq failed nil))
	  ;; dired-readin can fail if parent directories are inaccessible.
	  ;; Don't leave an empty buffer around in that case.
	  (if failed (kill-buffer buffer))))
      (goto-char (point-min))
      (dired-initial-position dirname))
    (set-buffer old-buf)
    buffer))

(defvar dired-buffers nil
  ;; Enlarged by dired-advertise
  ;; Queried by function dired-buffers-for-dir. When this detects a
  ;; killed buffer, it is removed from this list.
  "Alist of expanded directories and their associated dired buffers.")

(defun dired-find-buffer-nocreate (dirname &optional mode)
  ;; This differs from dired-buffers-for-dir in that it does not consider
  ;; subdirs of default-directory and searches for the first match only.
  ;; Also, the major mode must be MODE.
  (setq dirname (expand-file-name dirname))
  (let (found (blist dired-buffers))    ; was (buffer-list)
    (or mode (setq mode 'dired-mode))
    (while blist
      (if (null (buffer-name (cdr (car blist))))
	  (setq blist (cdr blist))
	(save-excursion
	  (set-buffer (cdr (car blist)))
	  (if (and (eq major-mode mode)
		   dired-directory  ;; nil during find-alternate-file
		   (equal dirname
			  (expand-file-name
			   (if (consp dired-directory)
			       (car dired-directory)
			     dired-directory))))
	      (setq found (cdr (car blist))
		    blist nil)
	    (setq blist (cdr blist))))))
    found))


;; Read in a new dired buffer

(defun dired-readin ()
  "Read in a new dired buffer.
Differs from `dired-insert-subdir' in that it accepts
wildcards, erases the buffer, and builds the subdir-alist anew
\(including making it buffer-local and clearing it first)."

  ;; default-directory and dired-actual-switches must be buffer-local
  ;; and initialized by now.
  (let (dirname)
    (if (consp dired-directory)
	(setq dirname (car dired-directory))
      (setq dirname dired-directory))
    (setq dirname (expand-file-name dirname))
    (save-excursion
      ;; This hook which may want to modify dired-actual-switches
      ;; based on dired-directory, e.g. with ange-ftp to a SysV host
      ;; where ls won't understand -Al switches.
      (run-hooks 'dired-before-readin-hook)
      (if (consp buffer-undo-list)
	  (setq buffer-undo-list nil))
      (make-local-variable 'file-name-coding-system)
      (setq file-name-coding-system
	    (or coding-system-for-read file-name-coding-system))
      (let (buffer-read-only
	    ;; Don't make undo entries for readin.
	    (buffer-undo-list t))
	(widen)
	(erase-buffer)
	(dired-readin-insert))
      (goto-char (point-min))
      ;; Must first make alist buffer local and set it to nil because
      ;; dired-build-subdir-alist will call dired-clear-alist first
      (set (make-local-variable 'dired-subdir-alist) nil)
      (dired-build-subdir-alist)
      (let ((attributes (file-attributes dirname)))
	(if (eq (car attributes) t)
	    (set-visited-file-modtime (nth 5 attributes))))
      (set-buffer-modified-p nil)
      ;; No need to narrow since the whole buffer contains just
      ;; dired-readin's output, nothing else.  The hook can
      ;; successfully use dired functions (e.g. dired-get-filename)
      ;; as the subdir-alist has been built in dired-readin.
      (run-hooks 'dired-after-readin-hook))))

;; Subroutines of dired-readin

(defun dired-readin-insert ()
  ;; Insert listing for the specified dir (and maybe file list)
  ;; already in dired-directory, assuming a clean buffer.
  (let (dir file-list)
    (if (consp dired-directory)
	(setq dir (car dired-directory)
	      file-list (cdr dired-directory))
      (setq dir dired-directory
	    file-list nil))
    (setq dir (expand-file-name dir))
    (if (and (equal "" (file-name-nondirectory dir))
	     (not file-list))
	;; If we are reading a whole single directory...
	(dired-insert-directory dir dired-actual-switches nil nil t)
      (if (not (file-readable-p
		(directory-file-name (file-name-directory dir))))
	  (error "Directory %s inaccessible or nonexistent" dir)
	;; Else treat it as a wildcard spec
	;; unless we have an explicit list of files.
	(dired-insert-directory dir dired-actual-switches
				file-list (not file-list) t)))))

(defun dired-align-file (beg end)
  "Align the fields of a file to the ones of surrounding lines.
BEG..END is the line where the file info is located."
  ;; Some versions of ls try to adjust the size of each field so as to just
  ;; hold the largest element ("largest" in the current invocation, of
  ;; course).  So when a single line is output, the size of each field is
  ;; just big enough for that one output.  Thus when dired refreshes one
  ;; line, the alignment if this line w.r.t the rest is messed up because
  ;; the fields of that one line will generally be smaller.
  ;;
  ;; To work around this problem, we here add spaces to try and
  ;; re-align the fields as needed.  Since this is purely aesthetic,
  ;; it is of utmost importance that it doesn't mess up anything like
  ;; `dired-move-to-filename'.  To this end, we limit ourselves to
  ;; adding spaces only, and to only add them at places where there
  ;; was already at least one space.  This way, as long as
  ;; `directory-listing-before-filename-regexp' always matches spaces
  ;; with "*" or "+", we know we haven't made anything worse.  There
  ;; is one spot where the exact number of spaces is important, which
  ;; is just before the actual filename, so we refrain from adding
  ;; spaces there (and within the filename as well, of course).
  (save-excursion
    (let (file file-col other other-col)
      ;; Check the there is indeed a file, and that there is anoter adjacent
      ;; file with which to align, and that additional spaces are needed to
      ;; align the filenames.
      (when (and (setq file (progn (goto-char beg)
				   (dired-move-to-filename nil end)))
		 (setq file-col (current-column))
		 (setq other
		       (or (and (goto-char beg)
				(zerop (forward-line -1))
				(dired-move-to-filename))
			   (and (goto-char beg)
				(zerop (forward-line 1))
				(dired-move-to-filename))))
		 (setq other-col (current-column))
		 (/= file other)
		 ;; Make sure there is some work left to do.
		 (> other-col file-col))
	;; If we've only looked at the line above, check to see if the line
	;; below exists as well and if so, align with the shorter one.
	(when (and (< other file)
		   (goto-char beg)
		   (zerop (forward-line 1))
		   (dired-move-to-filename))
	  (let ((alt-col (current-column)))
	    (when (< alt-col other-col)
	      (setq other-col alt-col)
	      (setq other (point)))))
	;; Keep positions uptodate when we insert stuff.
	(if (> other file) (setq other (copy-marker other)))
	(setq file (copy-marker file))
	;; Main loop.
	(goto-char beg)
	(skip-chars-forward " ")	;Skip to the first field.
	(while (and (> other-col file-col)
		    ;; Don't touch anything just before (and after) the
		    ;; beginning of the filename.
		    (> file (point)))
	  ;; We're now just in front of a field, with a space behind us.
	  (let* ((curcol (current-column))
		 ;; Nums are right-aligned.
		 (num-align (looking-at "[0-9]"))
		 ;; Let's look at the other line, in the same column: we
		 ;; should be either near the end of the previous field, or
		 ;; in the space between that field and the next.
		 ;; [ Of course, it's also possible that we're already within
		 ;; the next field or even past it, but that's unlikely since
		 ;; other-col > file-col. ]
		 ;; Let's find the distance to the alignment-point (either
		 ;; the beginning or the end of the next field, depending on
		 ;; whether this field is left or right aligned).
		 (align-pt-offset
		  (save-excursion
		    (goto-char other)
		    (move-to-column curcol)
		    (when (looking-at
			   (concat
			    (if (eq (char-before) ?\s) " *" "[^ ]* *")
			    (if num-align "[0-9][^ ]*")))
		      (- (match-end 0) (match-beginning 0)))))
		 ;; Now, the number of spaces to insert is align-pt-offset
		 ;; minus the distance to the equivalent point on the
		 ;; current line.
		 (spaces
		  (if (not num-align)
		      align-pt-offset
		    (and align-pt-offset
			 (save-excursion
			   (skip-chars-forward "^ ")
			   (- align-pt-offset (- (current-column) curcol)))))))
	    (when (and spaces (> spaces 0))
	      (setq file-col (+ spaces file-col))
	      (if (> file-col other-col)
		  (setq spaces (- spaces (- file-col other-col))))
	      (insert-char ?\s spaces)
	      ;; Let's just make really sure we did not mess up.
	      (unless (save-excursion
			(eq (dired-move-to-filename) (marker-position file)))
		;; Damn!  We messed up: let's revert the change.
		(delete-char (- spaces)))))
	  ;; Now skip to next field.
	  (skip-chars-forward "^ ") (skip-chars-forward " "))
	(set-marker file nil)))))


(defun dired-insert-directory (dir switches &optional file-list wildcard hdr)
  "Insert a directory listing of DIR, Dired style.
Use SWITCHES to make the listings.
If FILE-LIST is non-nil, list only those files.
Otherwise, if WILDCARD is non-nil, expand wildcards;
 in that case, DIR should be a file name that uses wildcards.
In other cases, DIR should be a directory name or a directory filename.
If HDR is non-nil, insert a header line with the directory name."
  (let ((opoint (point))
	(process-environment (copy-sequence process-environment))
	end)
    (if (or dired-use-ls-dired (file-remote-p dir))
	(setq switches (concat "--dired " switches)))
    ;; We used to specify the C locale here, to force English month names;
    ;; but this should not be necessary any more,
    ;; with the new value of `directory-listing-before-filename-regexp'.
    (if file-list
	(dolist (f file-list)
	  (let ((beg (point)))
	    (insert-directory f switches nil nil)
	    ;; Re-align fields, if necessary.
	    (dired-align-file beg (point))))
      (insert-directory dir switches wildcard (not wildcard)))
    ;; Quote certain characters, unless ls quoted them for us.
    (if (not (string-match "b" dired-actual-switches))
	(save-excursion
	  (setq end (point-marker))
	  (goto-char opoint)
	  (while (search-forward "\\" end t)
	    (replace-match (apply #'propertize
				  "\\\\"
				  (text-properties-at (match-beginning 0)))
			   nil t))
	  (goto-char opoint)
	  (while (search-forward "\^m" end t)
	    (replace-match (apply #'propertize
				  "\\015"
				  (text-properties-at (match-beginning 0)))
			   nil t))
	  (set-marker end nil)))
    (dired-insert-set-properties opoint (point))
    ;; If we used --dired and it worked, the lines are already indented.
    ;; Otherwise, indent them.
    (unless (save-excursion
	      (goto-char opoint)
	      (looking-at "  "))
      (let ((indent-tabs-mode nil))
	(indent-rigidly opoint (point) 2)))
    ;; Insert text at the beginning to standardize things.
    (save-excursion
      (goto-char opoint)
      (if (and (or hdr wildcard) (not (looking-at "^  /.*:$")))
	  ;; Note that dired-build-subdir-alist will replace the name
	  ;; by its expansion, so it does not matter whether what we insert
	  ;; here is fully expanded, but it should be absolute.
	  (insert "  " (directory-file-name (file-name-directory dir)) ":\n"))
      (when wildcard
	;; Insert "wildcard" line where "total" line would be for a full dir.
	(insert "  wildcard " (file-name-nondirectory dir) "\n")))))

(defun dired-insert-set-properties (beg end)
  "Make the file names highlight when the mouse is on them."
  (save-excursion
    (goto-char beg)
    (while (< (point) end)
      (condition-case nil
	  (if (dired-move-to-filename)
	      (add-text-properties
	       (point)
	       (save-excursion
		 (dired-move-to-end-of-filename)
		 (point))
	       '(mouse-face highlight
		 help-echo "mouse-2: visit this file in other window")))
	(error nil))
      (forward-line 1))))

;; Reverting a dired buffer

(defun dired-revert (&optional arg noconfirm)
  "Reread the dired buffer.
Must also be called after `dired-actual-switches' have changed.
Should not fail even on completely garbaged buffers.
Preserves old cursor, marks/flags, hidden-p."
  (widen)				; just in case user narrowed
  (let ((modflag (buffer-modified-p))
	(opoint (point))
	(ofile (dired-get-filename nil t))
	(mark-alist nil)		; save marked files
	(hidden-subdirs (dired-remember-hidden))
	(old-subdir-alist (cdr (reverse dired-subdir-alist))) ; except pwd
	(case-fold-search nil)		; we check for upper case ls flags
	buffer-read-only)
    (goto-char (point-min))
    (setq mark-alist;; only after dired-remember-hidden since this unhides:
	  (dired-remember-marks (point-min) (point-max)))
    ;; treat top level dir extra (it may contain wildcards)
    (dired-uncache
     (if (consp dired-directory) (car dired-directory) dired-directory))
    ;; Run dired-after-readin-hook just once, below.
    (let ((dired-after-readin-hook nil))
      (dired-readin)
      (dired-insert-old-subdirs old-subdir-alist))
    (dired-mark-remembered mark-alist)	; mark files that were marked
    ;; ... run the hook for the whole buffer, and only after markers
    ;; have been reinserted (else omitting in dired-x would omit marked files)
    (run-hooks 'dired-after-readin-hook)	; no need to narrow
    (or (and ofile (dired-goto-file ofile)) ; move cursor to where it
	(goto-char opoint))		; was before
    (dired-move-to-filename)
    (save-excursion			; hide subdirs that were hidden
      (dolist (dir hidden-subdirs)
	(if (dired-goto-subdir dir)
	    (dired-hide-subdir 1))))
    (unless modflag (restore-buffer-modified-p nil)))
  ;; outside of the let scope
;;;  Might as well not override the user if the user changed this.
;;;  (setq buffer-read-only t)
  )

;; Subroutines of dired-revert
;; Some of these are also used when inserting subdirs.

(defun dired-remember-marks (beg end)
  "Return alist of files and their marks, from BEG to END."
  (if selective-display			; must unhide to make this work.
      (let (buffer-read-only)
	(subst-char-in-region beg end ?\r ?\n)))
  (let (fil chr alist)
    (save-excursion
      (goto-char beg)
      (while (re-search-forward dired-re-mark end t)
	(if (setq fil (dired-get-filename nil t))
	    (setq chr (preceding-char)
		  alist (cons (cons fil chr) alist)))))
    alist))

(defun dired-mark-remembered (alist)
  "Mark all files remembered in ALIST.
Each element of ALIST looks like (FILE . MARKERCHAR)."
  (let (elt fil chr)
    (while alist
      (setq elt (car alist)
	    alist (cdr alist)
	    fil (car elt)
	    chr (cdr elt))
      (if (dired-goto-file fil)
	  (save-excursion
	    (beginning-of-line)
	    (delete-char 1)
	    (insert chr))))))

(defun dired-remember-hidden ()
  "Return a list of names of subdirs currently hidden."
  (let ((l dired-subdir-alist) dir pos result)
    (while l
      (setq dir (car (car l))
	    pos (cdr (car l))
	    l (cdr l))
      (goto-char pos)
      (skip-chars-forward "^\r\n")
      (if (eq (following-char) ?\r)
	  (setq result (cons dir result))))
    result))

(defun dired-insert-old-subdirs (old-subdir-alist)
  "Try to insert all subdirs that were displayed before.
Do so according to the former subdir alist OLD-SUBDIR-ALIST."
  (or (string-match "R" dired-actual-switches)
      (let (elt dir)
	(while old-subdir-alist
	  (setq elt (car old-subdir-alist)
		old-subdir-alist (cdr old-subdir-alist)
		dir (car elt))
	  (condition-case ()
	      (progn
		(dired-uncache dir)
		(dired-insert-subdir dir))
	    (error nil))))))

(defun dired-uncache (dir)
  "Remove directory DIR from any directory cache."
  (let ((handler (find-file-name-handler dir 'dired-uncache)))
    (if handler
	(funcall handler 'dired-uncache dir))))

;; dired mode key bindings and initialization

(defvar dired-mode-map
  ;; This looks ugly when substitute-command-keys uses C-d instead d:
  ;;  (define-key dired-mode-map "\C-d" 'dired-flag-file-deletion)
  (let ((map (make-keymap)))
    (suppress-keymap map)
    (define-key map [mouse-2] 'dired-mouse-find-file-other-window)
    (define-key map [follow-link] 'mouse-face)
    ;; Commands to mark or flag certain categories of files
    (define-key map "#" 'dired-flag-auto-save-files)
    (define-key map "." 'dired-clean-directory)
    (define-key map "~" 'dired-flag-backup-files)
    (define-key map "&" 'dired-flag-garbage-files)
    ;; Upper case keys (except !) for operating on the marked files
    (define-key map "A" 'dired-do-search)
    (define-key map "C" 'dired-do-copy)
    (define-key map "B" 'dired-do-byte-compile)
    (define-key map "D" 'dired-do-delete)
    (define-key map "G" 'dired-do-chgrp)
    (define-key map "H" 'dired-do-hardlink)
    (define-key map "L" 'dired-do-load)
    (define-key map "M" 'dired-do-chmod)
    (define-key map "O" 'dired-do-chown)
    (define-key map "P" 'dired-do-print)
    (define-key map "Q" 'dired-do-query-replace-regexp)
    (define-key map "R" 'dired-do-rename)
    (define-key map "S" 'dired-do-symlink)
    (define-key map "T" 'dired-do-touch)
    (define-key map "X" 'dired-do-shell-command)
    (define-key map "Z" 'dired-do-compress)
    (define-key map "!" 'dired-do-shell-command)
    ;; Comparison commands
    (define-key map "=" 'dired-diff)
    (define-key map "\M-=" 'dired-backup-diff)
    ;; Tree Dired commands
    (define-key map "\M-\C-?" 'dired-unmark-all-files)
    (define-key map "\M-\C-d" 'dired-tree-down)
    (define-key map "\M-\C-u" 'dired-tree-up)
    (define-key map "\M-\C-n" 'dired-next-subdir)
    (define-key map "\M-\C-p" 'dired-prev-subdir)
    ;; move to marked files
    (define-key map "\M-{" 'dired-prev-marked-file)
    (define-key map "\M-}" 'dired-next-marked-file)
    ;; Make all regexp commands share a `%' prefix:
    ;; We used to get to the submap via a symbol dired-regexp-prefix,
    ;; but that seems to serve little purpose, and copy-keymap
    ;; does a better job without it.
    (define-key map "%" nil)
    (define-key map "%u" 'dired-upcase)
    (define-key map "%l" 'dired-downcase)
    (define-key map "%d" 'dired-flag-files-regexp)
    (define-key map "%g" 'dired-mark-files-containing-regexp)
    (define-key map "%m" 'dired-mark-files-regexp)
    (define-key map "%r" 'dired-do-rename-regexp)
    (define-key map "%C" 'dired-do-copy-regexp)
    (define-key map "%H" 'dired-do-hardlink-regexp)
    (define-key map "%R" 'dired-do-rename-regexp)
    (define-key map "%S" 'dired-do-symlink-regexp)
    ;; Commands for marking and unmarking.
    (define-key map "*" nil)
    (define-key map "**" 'dired-mark-executables)
    (define-key map "*/" 'dired-mark-directories)
    (define-key map "*@" 'dired-mark-symlinks)
    (define-key map "*%" 'dired-mark-files-regexp)
    (define-key map "*c" 'dired-change-marks)
    (define-key map "*s" 'dired-mark-subdir-files)
    (define-key map "*m" 'dired-mark)
    (define-key map "*u" 'dired-unmark)
    (define-key map "*?" 'dired-unmark-all-files)
    (define-key map "*!" 'dired-unmark-all-marks)
    (define-key map "U" 'dired-unmark-all-marks)
    (define-key map "*\177" 'dired-unmark-backward)
    (define-key map "*\C-n" 'dired-next-marked-file)
    (define-key map "*\C-p" 'dired-prev-marked-file)
    (define-key map "*t" 'dired-toggle-marks)
    ;; Lower keys for commands not operating on all the marked files
    (define-key map "a" 'dired-find-alternate-file)
    (define-key map "d" 'dired-flag-file-deletion)
    (define-key map "e" 'dired-find-file)
    (define-key map "f" 'dired-find-file)
    (define-key map "\C-m" 'dired-advertised-find-file)
    (define-key map "g" 'revert-buffer)
    (define-key map "h" 'describe-mode)
    (define-key map "i" 'dired-maybe-insert-subdir)
    (define-key map "j" 'dired-goto-file)
    (define-key map "k" 'dired-do-kill-lines)
    (define-key map "l" 'dired-do-redisplay)
    (define-key map "m" 'dired-mark)
    (define-key map "n" 'dired-next-line)
    (define-key map "o" 'dired-find-file-other-window)
    (define-key map "\C-o" 'dired-display-file)
    (define-key map "p" 'dired-previous-line)
    (define-key map "q" 'quit-window)
    (define-key map "s" 'dired-sort-toggle-or-edit)
    (define-key map "t" 'dired-toggle-marks)
    (define-key map "u" 'dired-unmark)
    (define-key map "v" 'dired-view-file)
    (define-key map "w" 'dired-copy-filename-as-kill)
    (define-key map "x" 'dired-do-flagged-delete)
    (define-key map "y" 'dired-show-file-type)
    (define-key map "+" 'dired-create-directory)
    ;; moving
    (define-key map "<" 'dired-prev-dirline)
    (define-key map ">" 'dired-next-dirline)
    (define-key map "^" 'dired-up-directory)
    (define-key map " "  'dired-next-line)
    (define-key map "\C-n" 'dired-next-line)
    (define-key map "\C-p" 'dired-previous-line)
    (define-key map [down] 'dired-next-line)
    (define-key map [up] 'dired-previous-line)
    ;; hiding
    (define-key map "$" 'dired-hide-subdir)
    (define-key map "\M-$" 'dired-hide-all)
    ;; misc
    (define-key map "\C-x\C-q" 'dired-toggle-read-only)
    (define-key map "?" 'dired-summary)
    (define-key map "\177" 'dired-unmark-backward)
    (define-key map [remap undo] 'dired-undo)
    (define-key map [remap advertised-undo] 'dired-undo)
    ;; thumbnail manipulation (image-dired)
    (define-key map "\C-td" 'image-dired-display-thumbs)
    (define-key map "\C-tt" 'image-dired-tag-files)
    (define-key map "\C-tr" 'image-dired-delete-tag)
    (define-key map "\C-tj" 'image-dired-jump-thumbnail-buffer)
    (define-key map "\C-ti" 'image-dired-dired-display-image)
    (define-key map "\C-tx" 'image-dired-dired-display-external)
    (define-key map "\C-ta" 'image-dired-display-thumbs-append)
    (define-key map "\C-t." 'image-dired-display-thumb)
    (define-key map "\C-tc" 'image-dired-dired-comment-files)
    (define-key map "\C-tf" 'image-dired-mark-tagged-files)
    (define-key map "\C-t\C-t" 'image-dired-dired-insert-marked-thumbs)
    (define-key map "\C-te" 'image-dired-dired-edit-comment-and-tags)

    ;; Make menu bar items.

    ;; No need to fo this, now that top-level items are fewer.
    ;;;;
    ;; Get rid of the Edit menu bar item to save space.
    ;(define-key map [menu-bar edit] 'undefined)

    (define-key map [menu-bar subdir]
      (cons "Subdir" (make-sparse-keymap "Subdir")))

    (define-key map [menu-bar subdir hide-all]
      '(menu-item "Hide All" dired-hide-all
		  :help "Hide all subdirectories, leave only header lines"))
    (define-key map [menu-bar subdir hide-subdir]
      '(menu-item "Hide/UnHide Subdir" dired-hide-subdir
		  :help "Hide or unhide current directory listing"))
    (define-key map [menu-bar subdir tree-down]
      '(menu-item "Tree Down" dired-tree-down
		  :help "Go to first subdirectory header down the tree"))
    (define-key map [menu-bar subdir tree-up]
      '(menu-item "Tree Up" dired-tree-up
		  :help "Go to first subdirectory header up the tree"))
    (define-key map [menu-bar subdir up]
      '(menu-item "Up Directory" dired-up-directory
		  :help "Edit the parent directory"))
    (define-key map [menu-bar subdir prev-subdir]
      '(menu-item "Prev Subdir" dired-prev-subdir
		  :help "Go to previous subdirectory header line"))
    (define-key map [menu-bar subdir next-subdir]
      '(menu-item "Next Subdir" dired-next-subdir
		  :help "Go to next subdirectory header line"))
    (define-key map [menu-bar subdir prev-dirline]
      '(menu-item "Prev Dirline" dired-prev-dirline
		  :help "Move to next directory-file line"))
    (define-key map [menu-bar subdir next-dirline]
      '(menu-item "Next Dirline" dired-next-dirline
		  :help "Move to previous directory-file line"))
    (define-key map [menu-bar subdir insert]
      '(menu-item "Insert This Subdir" dired-maybe-insert-subdir
		  :help "Insert contents of subdirectory"))

    (define-key map [menu-bar immediate]
      (cons "Immediate" (make-sparse-keymap "Immediate")))

    (define-key map
      [menu-bar immediate image-dired-dired-display-external]
      '(menu-item "Display Image Externally" image-dired-dired-display-external
                  :help "Display image in external viewer"))
    (define-key map
      [menu-bar immediate image-dired-dired-display-image]
      '(menu-item "Display Image" image-dired-dired-display-image
                  :help "Display sized image in a separate window"))

    (define-key map [menu-bar immediate dashes-4]
      '("--"))

    (define-key map [menu-bar immediate revert-buffer]
      '(menu-item "Refresh" revert-buffer
		  :help "Update contents of shown directories"))

    (define-key map [menu-bar immediate dashes]
      '("--"))

    (define-key map [menu-bar immediate compare-directories]
      '(menu-item "Compare Directories..." dired-compare-directories
		  :help "Mark files with different attributes in two dired buffers"))
    (define-key map [menu-bar immediate backup-diff]
      '(menu-item "Compare with Backup" dired-backup-diff
		  :help "Diff file at cursor with its latest backup"))
    (define-key map [menu-bar immediate diff]
      '(menu-item "Diff..." dired-diff
		  :help "Compare file at cursor with another file"))
    (define-key map [menu-bar immediate view]
      '(menu-item "View This File" dired-view-file
		  :help "Examine file at cursor in read-only mode"))
    (define-key map [menu-bar immediate display]
      '(menu-item "Display in Other Window" dired-display-file
		  :help "Display file at cursor in other window"))
    (define-key map [menu-bar immediate find-file-other-window]
      '(menu-item "Find in Other Window" dired-find-file-other-window
		  :help "Edit file at cursor in other window"))
    (define-key map [menu-bar immediate find-file]
      '(menu-item "Find This File" dired-find-file
		  :help "Edit file at cursor"))
    (define-key map [menu-bar immediate create-directory]
      '(menu-item "Create Directory..." dired-create-directory))
    (define-key map [menu-bar immediate wdired-mode]
      '(menu-item "Edit File Names" wdired-change-to-wdired-mode
		  :filter (lambda (x) (if (eq major-mode 'dired-mode) x))))

    (define-key map [menu-bar regexp]
      (cons "Regexp" (make-sparse-keymap "Regexp")))

    (define-key map
      [menu-bar regexp image-dired-mark-tagged-files]
      '(menu-item "Mark From Image Tag..." image-dired-mark-tagged-files
                  :help "Mark files whose image tags matches regexp"))

    (define-key map [menu-bar regexp dashes-1]
      '("--"))

    (define-key map [menu-bar regexp downcase]
      '(menu-item "Downcase" dired-downcase
		  ;; When running on plain MS-DOS, there's only one
		  ;; letter-case for file names.
		  :enable (or (not (fboundp 'msdos-long-file-names))
			      (msdos-long-file-names))
		  :help "Rename marked files to lower-case name"))
    (define-key map [menu-bar regexp upcase]
      '(menu-item "Upcase" dired-upcase
		  :enable (or (not (fboundp 'msdos-long-file-names))
			      (msdos-long-file-names))
		  :help "Rename marked files to upper-case name"))
    (define-key map [menu-bar regexp hardlink]
      '(menu-item "Hardlink..." dired-do-hardlink-regexp
		  :help "Make hard links for files matching regexp"))
    (define-key map [menu-bar regexp symlink]
      '(menu-item "Symlink..." dired-do-symlink-regexp
		  :visible (fboundp 'make-symbolic-link)
		  :help "Make symbolic links for files matching regexp"))
    (define-key map [menu-bar regexp rename]
      '(menu-item "Rename..." dired-do-rename-regexp
		  :help "Rename marked files matching regexp"))
    (define-key map [menu-bar regexp copy]
      '(menu-item "Copy..." dired-do-copy-regexp
		  :help "Copy marked files matching regexp"))
    (define-key map [menu-bar regexp flag]
      '(menu-item "Flag..." dired-flag-files-regexp
		  :help "Flag files matching regexp for deletion"))
    (define-key map [menu-bar regexp mark]
      '(menu-item "Mark..." dired-mark-files-regexp
		  :help "Mark files matching regexp for future operations"))
    (define-key map [menu-bar regexp mark-cont]
      '(menu-item "Mark Containing..." dired-mark-files-containing-regexp
		  :help "Mark files whose contents matches regexp"))

    (define-key map [menu-bar mark]
      (cons "Mark" (make-sparse-keymap "Mark")))

    (define-key map [menu-bar mark prev]
      '(menu-item "Previous Marked" dired-prev-marked-file
		  :help "Move to previous marked file"))
    (define-key map [menu-bar mark next]
      '(menu-item "Next Marked" dired-next-marked-file
		  :help "Move to next marked file"))
    (define-key map [menu-bar mark marks]
      '(menu-item "Change Marks..." dired-change-marks
		  :help "Replace marker with another character"))
    (define-key map [menu-bar mark unmark-all]
      '(menu-item "Unmark All" dired-unmark-all-marks))
    (define-key map [menu-bar mark symlinks]
      '(menu-item "Mark Symlinks" dired-mark-symlinks
		  :visible (fboundp 'make-symbolic-link)
		  :help "Mark all symbolic links"))
    (define-key map [menu-bar mark directories]
      '(menu-item "Mark Directories" dired-mark-directories
		  :help "Mark all directories except `.' and `..'"))
    (define-key map [menu-bar mark directory]
      '(menu-item "Mark Old Backups" dired-clean-directory
		  :help "Flag old numbered backups for deletion"))
    (define-key map [menu-bar mark executables]
      '(menu-item "Mark Executables" dired-mark-executables
		  :help "Mark all executable files"))
    (define-key map [menu-bar mark garbage-files]
      '(menu-item "Flag Garbage Files" dired-flag-garbage-files
		  :help "Flag unneeded files for deletion"))
    (define-key map [menu-bar mark backup-files]
      '(menu-item "Flag Backup Files" dired-flag-backup-files
		  :help "Flag all backup files for deletion"))
    (define-key map [menu-bar mark auto-save-files]
      '(menu-item "Flag Auto-save Files" dired-flag-auto-save-files
		  :help "Flag auto-save files for deletion"))
    (define-key map [menu-bar mark deletion]
      '(menu-item "Flag" dired-flag-file-deletion
		  :help "Flag current line's file for deletion"))
    (define-key map [menu-bar mark unmark]
      '(menu-item "Unmark" dired-unmark
		  :help "Unmark or unflag current line's file"))
    (define-key map [menu-bar mark mark]
      '(menu-item "Mark" dired-mark
		  :help "Mark current line's file for future operations"))
    (define-key map [menu-bar mark toggle-marks]
      '(menu-item "Toggle Marks" dired-toggle-marks
		  :help "Mark unmarked files, unmark marked ones"))

    (define-key map [menu-bar operate]
      (cons "Operate" (make-sparse-keymap "Operate")))

    (define-key map
      [menu-bar operate image-dired-delete-tag]
      '(menu-item "Delete Image Tag..." image-dired-delete-tag
                  :help "Delete image tag from current or marked files"))
    (define-key map
      [menu-bar operate image-dired-tag-files]
      '(menu-item "Add Image Tags..." image-dired-tag-files
                  :help "Add image tags to current or marked files"))
    (define-key map
      [menu-bar operate image-dired-dired-comment-files]
      '(menu-item "Add Image Comment..." image-dired-dired-comment-files
                  :help "Add image comment to current or marked files"))
    (define-key map
      [menu-bar operate image-dired-display-thumbs]
      '(menu-item "Display Image-Dired" image-dired-display-thumbs
                  :help "Display image-dired for current or marked image files"))

    (define-key map [menu-bar operate dashes-3]
      '("--"))

    (define-key map [menu-bar operate query-replace]
      '(menu-item "Query Replace in Files..." dired-do-query-replace-regexp
		  :help "Replace regexp in marked files"))
    (define-key map [menu-bar operate search]
      '(menu-item "Search Files..." dired-do-search
		  :help "Search marked files for regexp"))
    (define-key map [menu-bar operate chown]
      '(menu-item "Change Owner..." dired-do-chown
		  :visible (not (memq system-type '(ms-dos windows-nt)))
		  :help "Change the owner of marked files"))
    (define-key map [menu-bar operate chgrp]
      '(menu-item "Change Group..." dired-do-chgrp
		  :visible (not (memq system-type '(ms-dos windows-nt)))
		  :help "Change the group of marked files"))
    (define-key map [menu-bar operate chmod]
      '(menu-item "Change Mode..." dired-do-chmod
		  :help "Change mode (attributes) of marked files"))
    (define-key map [menu-bar operate touch]
      '(menu-item "Change Timestamp..." dired-do-touch
		  :help "Change timestamp of marked files"))
    (define-key map [menu-bar operate load]
      '(menu-item "Load" dired-do-load
		  :help "Load marked Emacs Lisp files"))
    (define-key map [menu-bar operate compile]
      '(menu-item "Byte-compile" dired-do-byte-compile
		  :help "Byte-compile marked Emacs Lisp files"))
    (define-key map [menu-bar operate compress]
      '(menu-item "Compress" dired-do-compress
		  :help "Compress/uncompress marked files"))
    (define-key map [menu-bar operate print]
      '(menu-item "Print..." dired-do-print
		  :help "Ask for print command and print marked files"))
    (define-key map [menu-bar operate hardlink]
      '(menu-item "Hardlink to..." dired-do-hardlink
		  :help "Make hard links for current or marked files"))
    (define-key map [menu-bar operate symlink]
      '(menu-item "Symlink to..." dired-do-symlink
		  :visible (fboundp 'make-symbolic-link)
		  :help "Make symbolic links for current or marked files"))
    (define-key map [menu-bar operate command]
      '(menu-item "Shell Command..." dired-do-shell-command
		  :help "Run a shell command on each of marked files"))
    (define-key map [menu-bar operate delete]
      '(menu-item "Delete" dired-do-delete
		  :help "Delete current file or all marked files"))
    (define-key map [menu-bar operate rename]
      '(menu-item "Rename to..." dired-do-rename
		  :help "Rename current file or move marked files"))
    (define-key map [menu-bar operate copy]
      '(menu-item "Copy to..." dired-do-copy
		  :help "Copy current file or all marked files"))

    map)
  "Local keymap for `dired-mode' buffers.")

;; Dired mode is suitable only for specially formatted data.
(put 'dired-mode 'mode-class 'special)

;; Autoload cookie needed by desktop.el
;;;###autoload
(defun dired-mode (&optional dirname switches)
  "\
Mode for \"editing\" directory listings.
In Dired, you are \"editing\" a list of the files in a directory and
  \(optionally) its subdirectories, in the format of `ls -lR'.
  Each directory is a page: use \\[backward-page] and \\[forward-page] to move pagewise.
\"Editing\" means that you can run shell commands on files, visit,
  compress, load or byte-compile them, change their file attributes
  and insert subdirectories into the same buffer.  You can \"mark\"
  files for later commands or \"flag\" them for deletion, either file
  by file or all files matching certain criteria.
You can move using the usual cursor motion commands.\\<dired-mode-map>
Letters no longer insert themselves.  Digits are prefix arguments.
Instead, type \\[dired-flag-file-deletion] to flag a file for Deletion.
Type \\[dired-mark] to Mark a file or subdirectory for later commands.
  Most commands operate on the marked files and use the current file
  if no files are marked.  Use a numeric prefix argument to operate on
  the next ARG (or previous -ARG if ARG<0) files, or just `1'
  to operate on the current file only.  Prefix arguments override marks.
  Mark-using commands display a list of failures afterwards.  Type \\[dired-summary]
  to see why something went wrong.
Type \\[dired-unmark] to Unmark a file or all files of a subdirectory.
Type \\[dired-unmark-backward] to back up one line and unflag.
Type \\[dired-do-flagged-delete] to eXecute the deletions requested.
Type \\[dired-advertised-find-file] to Find the current line's file
  (or dired it in another buffer, if it is a directory).
Type \\[dired-find-file-other-window] to find file or dired directory in Other window.
Type \\[dired-maybe-insert-subdir] to Insert a subdirectory in this buffer.
Type \\[dired-do-rename] to Rename a file or move the marked files to another directory.
Type \\[dired-do-copy] to Copy files.
Type \\[dired-sort-toggle-or-edit] to toggle Sorting by name/date or change the `ls' switches.
Type \\[revert-buffer] to read all currently expanded directories aGain.
  This retains all marks and hides subdirs again that were hidden before.
SPC and DEL can be used to move down and up by lines.

If Dired ever gets confused, you can either type \\[revert-buffer] \
to read the
directories again, type \\[dired-do-redisplay] \
to relist a single or the marked files or a
subdirectory, or type \\[dired-build-subdir-alist] to parse the buffer
again for the directory tree.

Customization variables (rename this buffer and type \\[describe-variable] on each line
for more info):

  `dired-listing-switches'
  `dired-trivial-filenames'
  `dired-shrink-to-fit'
  `dired-marker-char'
  `dired-del-marker'
  `dired-keep-marker-rename'
  `dired-keep-marker-copy'
  `dired-keep-marker-hardlink'
  `dired-keep-marker-symlink'

Hooks (use \\[describe-variable] to see their documentation):

  `dired-before-readin-hook'
  `dired-after-readin-hook'
  `dired-mode-hook'
  `dired-load-hook'

Keybindings:
\\{dired-mode-map}"
  ;; Not to be called interactively (e.g. dired-directory will be set
  ;; to default-directory, which is wrong with wildcards).
  (kill-all-local-variables)
  (use-local-map dired-mode-map)
  (dired-advertise)			; default-directory is already set
  (setq major-mode 'dired-mode
	mode-name "Dired"
	;; case-fold-search nil
	buffer-read-only t
	selective-display t		; for subdirectory hiding
	mode-line-buffer-identification
	(propertized-buffer-identification "%17b"))
  (set (make-local-variable 'revert-buffer-function)
       (function dired-revert))
  (set (make-local-variable 'buffer-stale-function)
       (function dired-buffer-stale-p))
  (set (make-local-variable 'page-delimiter)
       "\n\n")
  (set (make-local-variable 'dired-directory)
       (or dirname default-directory))
  ;; list-buffers uses this to display the dir being edited in this buffer.
  (set (make-local-variable 'list-buffers-directory)
       (expand-file-name (if (listp dired-directory)
			     (car dired-directory)
			   dired-directory)))
  (set (make-local-variable 'dired-actual-switches)
       (or switches dired-listing-switches))
  (set (make-local-variable 'font-lock-defaults)
       '(dired-font-lock-keywords t nil nil beginning-of-line))
  (set (make-local-variable 'desktop-save-buffer)
       'dired-desktop-buffer-misc-data)
  (setq dired-switches-alist nil)
  (dired-sort-other dired-actual-switches t)
  (when (featurep 'dnd)
    (set (make-local-variable 'dnd-protocol-alist)
	 (append dired-dnd-protocol-alist dnd-protocol-alist)))
  (run-mode-hooks 'dired-mode-hook))

;; Idiosyncratic dired commands that don't deal with marks.

(defun dired-summary ()
  "Summarize basic Dired commands and show recent dired errors."
  (interactive)
  (dired-why)
  ;>> this should check the key-bindings and use substitute-command-keys if non-standard
  (message
   "d-elete, u-ndelete, x-punge, f-ind, o-ther window, R-ename, C-opy, h-elp"))

(defun dired-undo ()
  "Undo in a dired buffer.
This doesn't recover lost files, it just undoes changes in the buffer itself.
You can use it to recover marks, killed lines or subdirs."
  (interactive)
  (let (buffer-read-only)
    (undo))
  (dired-build-subdir-alist)
  (message "Change in dired buffer undone.
Actual changes in files cannot be undone by Emacs."))

(defun dired-toggle-read-only ()
  "Edit dired buffer with Wdired, or set it read-only.
Call `wdired-change-to-wdired-mode' in dired buffers whose editing is
supported by Wdired (the major mode of the dired buffer is `dired-mode').
Otherwise, for buffers inheriting from dired-mode, call `toggle-read-only'."
  (interactive)
  (if (eq major-mode 'dired-mode)
      (wdired-change-to-wdired-mode)
    (toggle-read-only)))

(defun dired-next-line (arg)
  "Move down lines then position at filename.
Optional prefix ARG says how many lines to move; default is one line."
  (interactive "p")
  (forward-line arg)
  (dired-move-to-filename))

(defun dired-previous-line (arg)
  "Move up lines then position at filename.
Optional prefix ARG says how many lines to move; default is one line."
  (interactive "p")
  (forward-line (- arg))
  (dired-move-to-filename))

(defun dired-next-dirline (arg &optional opoint)
  "Goto ARG'th next directory file line."
  (interactive "p")
  (or opoint (setq opoint (point)))
  (if (if (> arg 0)
	  (re-search-forward dired-re-dir nil t arg)
	(beginning-of-line)
	(re-search-backward dired-re-dir nil t (- arg)))
      (dired-move-to-filename)		; user may type `i' or `f'
    (goto-char opoint)
    (error "No more subdirectories")))

(defun dired-prev-dirline (arg)
  "Goto ARG'th previous directory file line."
  (interactive "p")
  (dired-next-dirline (- arg)))

(defun dired-up-directory (&optional other-window)
  "Run Dired on parent directory of current directory.
Find the parent directory either in this buffer or another buffer.
Creates a buffer if necessary."
  (interactive "P")
  (let* ((dir (dired-current-directory))
	 (up (file-name-directory (directory-file-name dir))))
    (or (dired-goto-file (directory-file-name dir))
	;; Only try dired-goto-subdir if buffer has more than one dir.
	(and (cdr dired-subdir-alist)
	     (dired-goto-subdir up))
	(progn
	  (if other-window
	      (dired-other-window up)
	    (dired up))
	  (dired-goto-file dir)))))

(defun dired-get-file-for-visit ()
  "Get the current line's file name, with an error if file does not exist."
  (interactive)
  ;; We pass t for second arg so that we don't get error for `.' and `..'.
  (let ((raw (dired-get-filename nil t))
	file-name)
    (if (null raw)
	(error "No file on this line"))
    (setq file-name (file-name-sans-versions raw t))
    (if (file-exists-p file-name)
	file-name
      (if (file-symlink-p file-name)
	  (error "File is a symlink to a nonexistent target")
	(error "File no longer exists; type `g' to update dired buffer")))))

;; Force `f' rather than `e' in the mode doc:
(defalias 'dired-advertised-find-file 'dired-find-file)
(defun dired-find-file ()
  "In Dired, visit the file or directory named on this line."
  (interactive)
  ;; Bind `find-file-run-dired' so that the command works on directories
  ;; too, independent of the user's setting.
  (let ((find-file-run-dired t))
    (find-file (dired-get-file-for-visit))))

(defun dired-find-alternate-file ()
  "In Dired, visit this file or directory instead of the dired buffer."
  (interactive)
  (set-buffer-modified-p nil)
  (find-alternate-file (dired-get-file-for-visit)))
;; Don't override the setting from .emacs.
;;;###autoload (put 'dired-find-alternate-file 'disabled t)

(defun dired-mouse-find-file-other-window (event)
  "In Dired, visit the file or directory name you click on."
  (interactive "e")
  (let (window pos file)
    (save-excursion
      (setq window (posn-window (event-end event))
	    pos (posn-point (event-end event)))
      (if (not (windowp window))
	  (error "No file chosen"))
      (set-buffer (window-buffer window))
      (goto-char pos)
      (setq file (dired-get-file-for-visit)))
    (if (file-directory-p file)
	(or (and (cdr dired-subdir-alist)
		 (dired-goto-subdir file))
	    (progn
	      (select-window window)
	      (dired-other-window file)))
      (select-window window)
      (find-file-other-window (file-name-sans-versions file t)))))

(defun dired-view-file ()
  "In Dired, examine a file in view mode, returning to Dired when done.
When file is a directory, show it in this buffer if it is inserted.
Otherwise, display it in another buffer."
  (interactive)
  (let ((file (dired-get-file-for-visit)))
    (if (file-directory-p file)
	(or (and (cdr dired-subdir-alist)
		 (dired-goto-subdir file))
	    (dired file))
      (view-file file))))

(defun dired-find-file-other-window ()
  "In Dired, visit this file or directory in another window."
  (interactive)
  (find-file-other-window (dired-get-file-for-visit)))

(defun dired-display-file ()
  "In Dired, display this file or directory in another window."
  (interactive)
  (display-buffer (find-file-noselect (dired-get-file-for-visit))))

;;; Functions for extracting and manipulating file names in Dired buffers.

(defun dired-get-filename (&optional localp no-error-if-not-filep)
  "In Dired, return name of file mentioned on this line.
Value returned normally includes the directory name.
Optional arg LOCALP with value `no-dir' means don't include directory
name in result.  A value of `verbatim' means to return the name exactly as
it occurs in the buffer, and a value of t means construct name relative to
`default-directory', which still may contain slashes if in a subdirectory.
Optional arg NO-ERROR-IF-NOT-FILEP means treat `.' and `..' as
regular filenames and return nil if no filename on this line.
Otherwise, an error occurs in these cases."
  (let (case-fold-search file p1 p2 already-absolute)
    (save-excursion
      (if (setq p1 (dired-move-to-filename (not no-error-if-not-filep)))
	  (setq p2 (dired-move-to-end-of-filename no-error-if-not-filep))))
    ;; nil if no file on this line, but no-error-if-not-filep is t:
    (if (setq file (and p1 p2 (buffer-substring p1 p2)))
	(progn
	  ;; Get rid of the mouse-face property that file names have.
	  (set-text-properties 0 (length file) nil file)
	  ;; Unquote names quoted by ls or by dired-insert-directory.
	  ;; Using read to unquote is much faster than substituting
	  ;; \007 (4 chars) -> ^G  (1 char) etc. in a lisp loop.
	  (setq file
		(read
		 (concat "\""
			 ;; Some ls -b don't escape quotes, argh!
			 ;; This is not needed for GNU ls, though.
			 (or (dired-string-replace-match
			      "\\([^\\]\\|\\`\\)\"" file "\\1\\\\\"" nil t)
			     file)
			 "\"")))
	  ;; The above `read' will return a unibyte string if FILE
	  ;; contains eight-bit-control/graphic characters.
	  (if (and enable-multibyte-characters
		   (not (multibyte-string-p file)))
	      (setq file (string-to-multibyte file)))))
    (and file (file-name-absolute-p file)
	 ;; A relative file name can start with ~.
	 ;; Don't treat it as absolute in this context.
	 (not (eq (aref file 0) ?~))
	 (setq already-absolute t))
    (cond
     ((null file)
      nil)
     ((eq localp 'verbatim)
      file)
     ((and (not no-error-if-not-filep)
	   (member file '("." "..")))
      (error "Cannot operate on `.' or `..'"))
     ((and (eq localp 'no-dir) already-absolute)
      (file-name-nondirectory file))
     (already-absolute
      (let ((handler (find-file-name-handler file nil)))
	;; check for safe-magic property so that we won't
	;; put /: for names that don't really need them.
	;; For instance, .gz files when auto-compression-mode is on.
	(if (and handler (not (get handler 'safe-magic)))
	    (concat "/:" file)
	  file)))
     ((eq localp 'no-dir)
      file)
     ((equal (dired-current-directory) "/")
      (setq file (concat (dired-current-directory localp) file))
      (let ((handler (find-file-name-handler file nil)))
	;; check for safe-magic property so that we won't
	;; put /: for names that don't really need them.
	;; For instance, .gz files when auto-compression-mode is on.
	(if (and handler (not (get handler 'safe-magic)))
	    (concat "/:" file)
	  file)))
     (t
      (concat (dired-current-directory localp) file)))))

(defun dired-string-replace-match (regexp string newtext
                                   &optional literal global)
  "Replace first match of REGEXP in STRING with NEWTEXT.
If it does not match, nil is returned instead of the new string.
Optional arg LITERAL means to take NEWTEXT literally.
Optional arg GLOBAL means to replace all matches."
  (if global
      (let ((start 0) ret)
	(while (string-match regexp string start)
	  (let ((from-end (- (length string) (match-end 0))))
	    (setq ret (setq string (replace-match newtext t literal string)))
	    (setq start (- (length string) from-end))))
	  ret)
    (if (not (string-match regexp string 0))
	nil
      (replace-match newtext t literal string))))

(defun dired-make-absolute (file &optional dir)
  ;;"Convert FILE (a file name relative to DIR) to an absolute file name."
  ;; We can't always use expand-file-name as this would get rid of `.'
  ;; or expand in / instead default-directory if DIR=="".
  ;; This should be good enough for ange-ftp, but might easily be
  ;; redefined (for VMS?).
  ;; It should be reasonably fast, though, as it is called in
  ;; dired-get-filename.
  (concat (or dir default-directory) file))

(defun dired-make-relative (file &optional dir ignore)
  "Convert FILE (an absolute file name) to a name relative to DIR.
If this is impossible, return FILE unchanged.
DIR must be a directory name, not a file name."
  (or dir (setq dir default-directory))
  ;; This case comes into play if default-directory is set to
  ;; use ~.
  (if (and (> (length dir) 0) (= (aref dir 0) ?~))
      (setq dir (expand-file-name dir)))
  (if (string-match (concat "^" (regexp-quote dir)) file)
      (substring file (match-end 0))
;;;  (or no-error
;;;	(error "%s: not in directory tree growing at %s" file dir))
    file))

;;; Functions for finding the file name in a dired buffer line.

(defvar dired-permission-flags-regexp
  "\\([^ ]\\)[-r][-w]\\([^ ]\\)[-r][-w]\\([^ ]\\)[-r][-w]\\([^ ]\\)"
  "Regular expression to match the permission flags in `ls -l'.")

;; Move to first char of filename on this line.
;; Returns position (point) or nil if no filename on this line."
(defun dired-move-to-filename (&optional raise-error eol)
  "Move to the beginning of the filename on the current line.
Return the position of the beginning of the filename, or nil if none found."
  ;; This is the UNIX version.
  (or eol (setq eol (line-end-position)))
  (beginning-of-line)
  ;; First try assuming `ls --dired' was used.
  (let ((change (next-single-property-change (point) 'dired-filename nil eol)))
    (cond
     ((and change (< change eol))
      (goto-char change))
     ((re-search-forward directory-listing-before-filename-regexp eol t)
      (goto-char (match-end 0)))
     ((re-search-forward dired-permission-flags-regexp eol t)
      ;; Ha!  There *is* a file.  Our regexp-from-hell just failed to find it.
      (if raise-error
	  (error "Unrecognized line!  Check directory-listing-before-filename-regexp"))
      (beginning-of-line)
      nil)
     (raise-error
      (error "No file on this line")))))

(defun dired-move-to-end-of-filename (&optional no-error)
  ;; Assumes point is at beginning of filename,
  ;; thus the rwx bit re-search-backward below will succeed in *this*
  ;; line if at all.  So, it should be called only after
  ;; (dired-move-to-filename t).
  ;; On failure, signals an error (with non-nil NO-ERROR just returns nil).
  ;; This is the UNIX version.
  (if (get-text-property (point) 'dired-filename)
      (goto-char (next-single-property-change (point) 'dired-filename))
    (let (opoint file-type executable symlink hidden case-fold-search used-F eol)
      ;; case-fold-search is nil now, so we can test for capital F:
      (setq used-F (string-match "F" dired-actual-switches)
	    opoint (point)
	    eol (save-excursion (end-of-line) (point))
	    hidden (and selective-display
			(save-excursion (search-forward "\r" eol t))))
      (if hidden
	  nil
	(save-excursion	;; Find out what kind of file this is:
	  ;; Restrict perm bits to be non-blank,
	  ;; otherwise this matches one char to early (looking backward):
	  ;; "l---------" (some systems make symlinks that way)
	  ;; "----------" (plain file with zero perms)
	  (if (re-search-backward
	       dired-permission-flags-regexp nil t)
	      (setq file-type (char-after (match-beginning 1))
		    symlink (eq file-type ?l)
		    ;; Only with -F we need to know whether it's an executable
		    executable (and
				used-F
				(string-match
				 "[xst]" ;; execute bit set anywhere?
				 (concat
				  (match-string 2)
				  (match-string 3)
				  (match-string 4)))))
	    (or no-error (error "No file on this line"))))
	;; Move point to end of name:
	(if symlink
	    (if (search-forward " -> " eol t)
		(progn
		  (forward-char -4)
		  (and used-F
		       dired-ls-F-marks-symlinks
		       (eq (preceding-char) ?@)	;; did ls really mark the link?
		       (forward-char -1))))
	  (goto-char eol) ;; else not a symbolic link
	  ;; ls -lF marks dirs, sockets, fifos and executables with exactly
	  ;; one trailing character. (Executable bits on symlinks ain't mean
	  ;; a thing, even to ls, but we know it's not a symlink.)
	  (and used-F
	       (or (memq file-type '(?d ?s ?p))
		   executable)
	       (forward-char -1))))
      (or no-error
	  (not (eq opoint (point)))
	  (error "%s" (if hidden
		     (substitute-command-keys
		      "File line is hidden, type \\[dired-hide-subdir] to unhide")
		   "No file on this line")))
      (if (eq opoint (point))
	  nil
	(point)))))


;;; COPY NAMES OF MARKED FILES INTO KILL-RING.

(defun dired-copy-filename-as-kill (&optional arg)
  "Copy names of marked (or next ARG) files into the kill ring.
The names are separated by a space.
With a zero prefix arg, use the absolute file name of each marked file.
With \\[universal-argument], use the file name relative to the dired buffer's
`default-directory'.  (This still may contain slashes if in a subdirectory.)

If on a subdir headerline, use absolute subdirname instead;
prefix arg and marked files are ignored in this case.

You can then feed the file name(s) to other commands with \\[yank]."
  (interactive "P")
  (let ((string
         (or (dired-get-subdir)
             (mapconcat (function identity)
                        (if arg
                            (cond ((zerop (prefix-numeric-value arg))
                                   (dired-get-marked-files))
                                  ((consp arg)
                                   (dired-get-marked-files t))
                                  (t
                                   (dired-get-marked-files
				    'no-dir (prefix-numeric-value arg))))
                          (dired-get-marked-files 'no-dir))
                        " "))))
    (if (eq last-command 'kill-region)
	(kill-append string nil)
      (kill-new string))
    (message "%s" string)))


;; Keeping Dired buffers in sync with the filesystem and with each other

(defun dired-buffers-for-dir (dir &optional file)
;; Return a list of buffers that dired DIR (top level or in-situ subdir).
;; If FILE is non-nil, include only those whose wildcard pattern (if any)
;; matches FILE.
;; The list is in reverse order of buffer creation, most recent last.
;; As a side effect, killed dired buffers for DIR are removed from
;; dired-buffers.
  (setq dir (file-name-as-directory dir))
  (let ((alist dired-buffers) result elt buf)
    (while alist
      (setq elt (car alist)
	    buf (cdr elt))
      (if (buffer-name buf)
	  (if (dired-in-this-tree dir (car elt))
	      (with-current-buffer buf
		(and (assoc dir dired-subdir-alist)
		     (or (null file)
			 (let ((wildcards
				(file-name-nondirectory dired-directory)))
			   (or (= 0 (length wildcards))
			       (string-match (dired-glob-regexp wildcards)
					     file))))
		     (setq result (cons buf result)))))
	;; else buffer is killed - clean up:
	(setq dired-buffers (delq elt dired-buffers)))
      (setq alist (cdr alist)))
    result))

(defun dired-glob-regexp (pattern)
  "Convert glob-pattern PATTERN to a regular expression."
  (let ((matched-in-pattern 0)  ;; How many chars of PATTERN we've handled.
	regexp)
    (while (string-match "[[?*]" pattern matched-in-pattern)
      (let ((op-end (match-end 0))
	    (next-op (aref pattern (match-beginning 0))))
	(setq regexp (concat regexp
			     (regexp-quote
			      (substring pattern matched-in-pattern
					 (match-beginning 0)))))
	(cond ((= next-op ??)
	       (setq regexp (concat regexp "."))
	       (setq matched-in-pattern op-end))
	      ((= next-op ?\[)
	       ;; Fails to handle ^ yet ????
	       (let* ((set-start (match-beginning 0))
		      (set-cont
		       (if (= (aref pattern (1+ set-start)) ?^)
			   (+ 3 set-start)
			 (+ 2 set-start)))
		      (set-end (string-match "]" pattern set-cont))
		      (set (substring pattern set-start (1+ set-end))))
		 (setq regexp (concat regexp set))
		 (setq matched-in-pattern (1+ set-end))))
	      ((= next-op ?*)
	       (setq regexp (concat regexp ".*"))
	       (setq matched-in-pattern op-end)))))
    (concat "\\`"
	    regexp
	    (regexp-quote
	     (substring pattern matched-in-pattern))
	    "\\'")))



(defun dired-advertise ()
  ;;"Advertise in variable `dired-buffers' that we dired `default-directory'."
  ;; With wildcards we actually advertise too much.
  (let ((expanded-default (expand-file-name default-directory)))
    (if (memq (current-buffer) (dired-buffers-for-dir expanded-default))
	t				; we have already advertised ourselves
      (setq dired-buffers
	    (cons (cons expanded-default (current-buffer))
		  dired-buffers)))))

(defun dired-unadvertise (dir)
  ;; Remove DIR from the buffer alist in variable dired-buffers.
  ;; This has the effect of removing any buffer whose main directory is DIR.
  ;; It does not affect buffers in which DIR is a subdir.
  ;; Removing is also done as a side-effect in dired-buffer-for-dir.
  (setq dired-buffers
	(delq (assoc (expand-file-name dir) dired-buffers) dired-buffers)))

;; Tree Dired

;;; utility functions

(defun dired-in-this-tree (file dir)
  ;;"Is FILE part of the directory tree starting at DIR?"
  (let (case-fold-search)
    (string-match (concat "^" (regexp-quote dir)) file)))

(defun dired-normalize-subdir (dir)
  ;; Prepend default-directory to DIR if relative file name.
  ;; dired-get-filename must be able to make a valid file name from a
  ;; file and its directory DIR.
  (file-name-as-directory
   (if (file-name-absolute-p dir)
       dir
     (expand-file-name dir default-directory))))

(defun dired-get-subdir ()
  ;;"Return the subdir name on this line, or nil if not on a headerline."
  ;; Look up in the alist whether this is a headerline.
  (save-excursion
    (let ((cur-dir (dired-current-directory)))
      (beginning-of-line)		; alist stores b-o-l positions
      (and (zerop (- (point)
		     (dired-get-subdir-min (assoc cur-dir
						  dired-subdir-alist))))
	   cur-dir))))

;(defun dired-get-subdir-min (elt)
;  (cdr elt))
;; can't use macro,  must be redefinable for other alist format in dired-nstd.
(defalias 'dired-get-subdir-min 'cdr)

(defun dired-get-subdir-max (elt)
  (save-excursion
    (goto-char (dired-get-subdir-min elt))
    (dired-subdir-max)))

(defun dired-clear-alist ()
  (while dired-subdir-alist
    (set-marker (dired-get-subdir-min (car dired-subdir-alist)) nil)
    (setq dired-subdir-alist (cdr dired-subdir-alist))))

(defun dired-subdir-index (dir)
  ;; Return an index into alist for use with nth
  ;; for the sake of subdir moving commands.
  (let (found (index 0) (alist dired-subdir-alist))
    (while alist
      (if (string= dir (car (car alist)))
	  (setq alist nil found t)
	(setq alist (cdr alist) index (1+ index))))
    (if found index nil)))

(defun dired-next-subdir (arg &optional no-error-if-not-found no-skip)
  "Go to next subdirectory, regardless of level."
  ;; Use 0 arg to go to this directory's header line.
  ;; NO-SKIP prevents moving to end of header line, returning whatever
  ;; position was found in dired-subdir-alist.
  (interactive "p")
  (let ((this-dir (dired-current-directory))
	pos index)
    ;; nth with negative arg does not return nil but the first element
    (setq index (- (dired-subdir-index this-dir) arg))
    (setq pos (if (>= index 0)
		  (dired-get-subdir-min (nth index dired-subdir-alist))))
    (if pos
	(progn
	  (goto-char pos)
	  (or no-skip (skip-chars-forward "^\n\r"))
	  (point))
      (if no-error-if-not-found
	  nil				; return nil if not found
	(error "%s directory" (if (> arg 0) "Last" "First"))))))

(defun dired-build-subdir-alist (&optional switches)
  "Build `dired-subdir-alist' by parsing the buffer.
Returns the new value of the alist.
If optional arg SWITCHES is non-nil, use its value
instead of `dired-actual-switches'."
  (interactive)
  (dired-clear-alist)
  (save-excursion
    (let* ((count 0)
	   (buffer-read-only nil)
	   (buffer-undo-list t)
	   (switches (or switches dired-actual-switches))
	   new-dir-name
	   (R-ftp-base-dir-regex
	    ;; Used to expand subdirectory names correctly in recursive
	    ;; ange-ftp listings.
	    (and (string-match "R" switches)
		 (string-match "\\`/.*:\\(/.*\\)" default-directory)
		 (concat "\\`" (match-string 1 default-directory)))))
      (goto-char (point-min))
      (setq dired-subdir-alist nil)
      (while (re-search-forward dired-subdir-regexp nil t)
	;; Avoid taking a file name ending in a colon
	;; as a subdir name.
	(unless (save-excursion
		  (goto-char (match-beginning 0))
		  (beginning-of-line)
		  (forward-char 2)
		  (save-match-data (looking-at dired-re-perms)))
	  (save-excursion
	    (goto-char (match-beginning 1))
	    (setq new-dir-name
		  (buffer-substring-no-properties (point) (match-end 1))
		  new-dir-name
		  (save-match-data
		    (if (and R-ftp-base-dir-regex
			     (not (string= new-dir-name default-directory))
			     (string-match R-ftp-base-dir-regex new-dir-name))
			(concat default-directory
				(substring new-dir-name (match-end 0)))
		      (expand-file-name new-dir-name))))
	    (delete-region (point) (match-end 1))
	    (insert new-dir-name))
	  (setq count (1+ count))
	  (dired-alist-add-1 new-dir-name
			     ;; Place a sub directory boundary between lines.
			     (save-excursion
			       (goto-char (match-beginning 0))
			       (beginning-of-line)
			       (point-marker)))))
      (if (and (> count 1) (interactive-p))
	  (message "Buffer includes %d directories" count)))
    ;; We don't need to sort it because it is in buffer order per
    ;; constructionem.  Return new alist:
    dired-subdir-alist))

(defun dired-alist-add-1 (dir new-marker)
  ;; Add new DIR at NEW-MARKER.  Don't sort.
  (setq dired-subdir-alist
	(cons (cons (dired-normalize-subdir dir) new-marker)
	      dired-subdir-alist)))

(defun dired-goto-next-nontrivial-file ()
  ;; Position point on first nontrivial file after point.
  (dired-goto-next-file);; so there is a file to compare with
  (if (stringp dired-trivial-filenames)
      (while (and (not (eobp))
		  (string-match dired-trivial-filenames
				(file-name-nondirectory
				 (or (dired-get-filename nil t) ""))))
	(forward-line 1)
	(dired-move-to-filename))))

(defun dired-goto-next-file ()
  (let ((max (1- (dired-subdir-max))))
    (while (and (not (dired-move-to-filename)) (< (point) max))
      (forward-line 1))))

(defun dired-goto-file (file)
  "Go to line describing file FILE in this dired buffer."
  ;; Return value of point on success, else nil.
  ;; FILE must be an absolute file name.
  ;; Loses if FILE contains control chars like "\007" for which ls
  ;; either inserts "?" or "\\007" into the buffer, so we won't find
  ;; it in the buffer.
  (interactive
   (prog1				; let push-mark display its message
       (list (expand-file-name
	      (read-file-name "Goto file: "
			      (dired-current-directory))))
     (push-mark)))
  (setq file (directory-file-name file)) ; does no harm if no directory
  (let (found case-fold-search dir)
    (setq dir (or (file-name-directory file)
		  (error "File name `%s' is not absolute" file)))
    (save-excursion
      ;; The hair here is to get the result of dired-goto-subdir
      ;; without really calling it if we don't have any subdirs.
      (if (if (string= dir (expand-file-name default-directory))
	      (goto-char (point-min))
	    (and (cdr dired-subdir-alist)
		 (dired-goto-subdir dir)))
	  (let ((base (file-name-nondirectory file))
		search-string
		(boundary (dired-subdir-max)))
	    (setq search-string
		  (replace-regexp-in-string "\^m" "\\^m" base nil t))
	    (setq search-string
		  (replace-regexp-in-string "\\\\" "\\\\" search-string nil t))
	    (while (and (not found)
			;; filenames are preceded by SPC, this makes
			;; the search faster (e.g. for the filename "-"!).
 			(search-forward (concat " " search-string)
					boundary 'move))
	      ;; Match could have BASE just as initial substring or
	      ;; or in permission bits or date or
	      ;; not be a proper filename at all:
	      (if (equal base (dired-get-filename 'no-dir t))
		    ;; Must move to filename since an (actually
		    ;; correct) match could have been elsewhere on the
		    ;; ;; line (e.g. "-" would match somewhere in the
		    ;; permission bits).
		  (setq found (dired-move-to-filename))
		;; If this isn't the right line, move forward to avoid
		;; trying this line again.
		(forward-line 1))))))
    (and found
	 ;; return value of point (i.e., FOUND):
	 (goto-char found))))

(defun dired-initial-position (dirname)
  ;; Where point should go in a new listing of DIRNAME.
  ;; Point assumed at beginning of new subdir line.
  ;; You may redefine this function as you wish, e.g. like in dired-x.el.
  (end-of-line)
  (if dired-trivial-filenames (dired-goto-next-nontrivial-file)))

;; These are hooks which make tree dired work.
;; They are in this file because other parts of dired need to call them.
;; But they don't call the rest of tree dired unless there are subdirs loaded.

;; This function is called for each retrieved filename.
;; It could stand to be faster, though it's mostly function call
;; overhead.  Avoiding the function call seems to save about 10% in
;; dired-get-filename.  Make it a defsubst?
(defun dired-current-directory (&optional localp)
  "Return the name of the subdirectory to which this line belongs.
This returns a string with trailing slash, like `default-directory'.
Optional argument means return a file name relative to `default-directory'."
  (let ((here (point))
	(alist (or dired-subdir-alist
		   ;; probably because called in a non-dired buffer
		   (error "No subdir-alist in %s" (current-buffer))))
	elt dir)
    (while alist
      (setq elt (car alist)
	    dir (car elt)
	    ;; use `<=' (not `<') as subdir line is part of subdir
	    alist (if (<= (dired-get-subdir-min elt) here)
		      nil		; found
		    (cdr alist))))
    (if localp
	(dired-make-relative dir default-directory)
      dir)))

;; Subdirs start at the beginning of their header lines and end just
;; before the beginning of the next header line (or end of buffer).

(defun dired-subdir-max ()
  (save-excursion
    (if (or (null (cdr dired-subdir-alist)) (not (dired-next-subdir 1 t t)))
	(point-max)
      (point))))

;; Deleting files

(defcustom dired-recursive-deletes 'top
  "*Decide whether recursive deletes are allowed.
A value of nil means no recursive deletes.
`always' means delete recursively without asking.  This is DANGEROUS!
`top' means ask for each directory at top level, but delete its subdirectories
without asking.
Anything else means ask for each directory."
  :type '(choice :tag "Delete non-empty directories"
		 (const :tag "Yes" always)
		 (const :tag "No--only delete empty directories" nil)
		 (const :tag "Confirm for each directory" t)
		 (const :tag "Confirm for each top directory only" top))
  :group 'dired)

;; Match anything but `.' and `..'.
(defvar dired-re-no-dot "^\\([^.]\\|\\.\\([^.]\\|\\..\\)\\).*")

;; Delete file, possibly delete a directory and all its files.
;; This function is usefull outside of dired.  One could change it's name
;; to e.g. recursive-delete-file and put it somewhere else.
(defun dired-delete-file (file &optional recursive) "\
Delete FILE or directory (possibly recursively if optional RECURSIVE is true.)
RECURSIVE determines what to do with a non-empty directory.  If RECURSIVE is:
nil, do not delete.
`always', delete recursively without asking.
`top', ask for each directory at top level.
Anything else, ask for each sub-directory."
  (let (files)
     ;; This test is equivalent to
     ;; (and (file-directory-p fn) (not (file-symlink-p fn)))
     ;; but more efficient
    (if (not (eq t (car (file-attributes file))))
	(delete-file file)
      (when (and recursive
	       (setq files
		     (directory-files file t dired-re-no-dot)) ; Not empty.
	       (or (eq recursive 'always)
		   (yes-or-no-p (format "Recursive delete of %s? "
					(dired-make-relative file)))))
	(if (eq recursive 'top) (setq recursive 'always)) ; Don't ask again.
	(while files		; Recursively delete (possibly asking).
	    (dired-delete-file (car files) recursive)
	    (setq files (cdr files))))
      (delete-directory file))))

(defun dired-do-flagged-delete (&optional nomessage)
  "In Dired, delete the files flagged for deletion.
If NOMESSAGE is non-nil, we don't display any message
if there are no flagged files.
`dired-recursive-deletes' controls whether deletion of
non-empty directories is allowed."
  (interactive)
  (let* ((dired-marker-char dired-del-marker)
	 (regexp (dired-marker-regexp))
	 case-fold-search)
    (if (save-excursion (goto-char (point-min))
			(re-search-forward regexp nil t))
	(dired-internal-do-deletions
	 ;; this can't move point since ARG is nil
	 (dired-map-over-marks (cons (dired-get-filename) (point))
			       nil)
	 nil)
      (or nomessage
	  (message "(No deletions requested)")))))

(defun dired-do-delete (&optional arg)
  "Delete all marked (or next ARG) files.
`dired-recursive-deletes' controls whether deletion of
non-empty directories is allowed."
  ;; This is more consistent with the file marking feature than
  ;; dired-do-flagged-delete.
  (interactive "P")
  (dired-internal-do-deletions
   ;; this may move point if ARG is an integer
   (dired-map-over-marks (cons (dired-get-filename) (point))
			 arg)
   arg))

(defvar dired-deletion-confirmer 'yes-or-no-p) ; or y-or-n-p?

(defun dired-internal-do-deletions (l arg)
  ;; L is an alist of files to delete, with their buffer positions.
  ;; ARG is the prefix arg.
  ;; Filenames are absolute (VMS needs this for logical search paths).
  ;; (car L) *must* be the *last* (bottommost) file in the dired buffer.
  ;; That way as changes are made in the buffer they do not shift the
  ;; lines still to be changed, so the (point) values in L stay valid.
  ;; Also, for subdirs in natural order, a subdir's files are deleted
  ;; before the subdir itself - the other way around would not work.
  (let ((files (mapcar (function car) l))
	(count (length l))
	(succ 0))
    ;; canonicalize file list for pop up
    (setq files (nreverse (mapcar (function dired-make-relative) files)))
    (if (dired-mark-pop-up
	 " *Deletions*" 'delete files dired-deletion-confirmer
	 (format "Delete %s " (dired-mark-prompt arg files)))
	(save-excursion
	  (let (failures);; files better be in reverse order for this loop!
	    (while l
	      (goto-char (cdr (car l)))
	      (let (buffer-read-only)
		(condition-case err
		    (let ((fn (car (car l))))
		      (dired-delete-file fn dired-recursive-deletes)
		      ;; if we get here, removing worked
		      (setq succ (1+ succ))
		      (message "%s of %s deletions" succ count)
		      (dired-fun-in-all-buffers
		       (file-name-directory fn) (file-name-nondirectory fn)
		       (function dired-delete-entry) fn))
		  (error;; catch errors from failed deletions
		   (dired-log "%s\n" err)
		   (setq failures (cons (car (car l)) failures)))))
	      (setq l (cdr l)))
	    (if (not failures)
		(message "%d deletion%s done" count (dired-plural-s count))
	      (dired-log-summary
	       (format "%d of %d deletion%s failed"
		       (length failures) count
		       (dired-plural-s count))
	       failures))))
      (message "(No deletions performed)")))
  (dired-move-to-filename))

(defun dired-fun-in-all-buffers (directory file fun &rest args)
  ;; In all buffers dired'ing DIRECTORY, run FUN with ARGS.
  ;; If the buffer has a wildcard pattern, check that it matches FILE.
  ;; (FILE does not include a directory component.)
  ;; FILE may be nil, in which case ignore it.
  ;; Return list of buffers where FUN succeeded (i.e., returned non-nil).
  (let (success-list)
    (dolist (buf (dired-buffers-for-dir (expand-file-name directory)
					file))
      (with-current-buffer buf
	(if (apply fun args)
	    (setq success-list (cons (buffer-name buf) success-list)))))
    success-list))

;; Delete the entry for FILE from
(defun dired-delete-entry (file)
  (save-excursion
    (and (dired-goto-file file)
	 (let (buffer-read-only)
	   (delete-region (progn (beginning-of-line) (point))
			  (save-excursion (forward-line 1) (point))))))
  (dired-clean-up-after-deletion file))

;; This is a separate function for the sake of dired-x.el.
(defun dired-clean-up-after-deletion (fn)
  ;; Clean up after a deleted file or directory FN.
  (save-excursion (and (cdr dired-subdir-alist)
		       (dired-goto-subdir fn)
		       (dired-kill-subdir))))

;; Confirmation

(defun dired-marker-regexp ()
  (concat "^" (regexp-quote (char-to-string dired-marker-char))))

(defun dired-plural-s (count)
  (if (= 1 count) "" "s"))

(defun dired-mark-prompt (arg files)
  ;; Return a string for use in a prompt, either the current file
  ;; name, or the marker and a count of marked files.
  (let ((count (length files)))
    (if (= count 1)
	(car files)
      ;; more than 1 file:
      (if (integerp arg)
	  ;; abs(arg) = count
	  ;; Perhaps this is nicer, but it also takes more screen space:
	  ;;(format "[%s %d files]" (if (> arg 0) "next" "previous")
	  ;;                        count)
	  (format "[next %d files]" arg)
	(format "%c [%d files]" dired-marker-char count)))))

(defun dired-pop-to-buffer (buf)
  ;; Pop up buffer BUF.
  ;; If dired-shrink-to-fit is t, make its window fit its contents.
  (if (not dired-shrink-to-fit)
      (pop-to-buffer (get-buffer-create buf))
    ;; let window shrink to fit:
    (let ((window (selected-window))
	  target-lines w2)
      (cond ;; if split-height-threshold is enabled, use the largest window
            ((and (> (window-height (setq w2 (get-largest-window)))
		     split-height-threshold)
		  (window-full-width-p w2))
	     (setq window w2))
	    ;; if the least-recently-used window is big enough, use it
	    ((and (> (window-height (setq w2 (get-lru-window)))
		     (* 2 window-min-height))
		  (window-full-width-p w2))
	     (setq window w2)))
      (save-excursion
	(set-buffer buf)
	(goto-char (point-max))
	(skip-chars-backward "\n\r\t ")
	(setq target-lines (count-lines (point-min) (point)))
	;; Don't forget to count the last line.
	(if (not (bolp))
	    (setq target-lines (1+ target-lines))))
      (if (<= (window-height window) (* 2 window-min-height))
	  ;; At this point, every window on the frame is too small to split.
	  (setq w2 (display-buffer buf))
	(setq w2 (split-window window
		  (max window-min-height
		       (- (window-height window)
			  (1+ (max window-min-height target-lines)))))))
      (set-window-buffer w2 buf)
      (if (< (1- (window-height w2)) target-lines)
	  (progn
	    (select-window w2)
	    (enlarge-window (- target-lines (1- (window-height w2))))))
      (set-window-start w2 1)
      )))

(defcustom dired-no-confirm nil
  "A list of symbols for commands Dired should not confirm.
Command symbols are `byte-compile', `chgrp', `chmod', `chown', `compress',
`copy', `delete', `hardlink', `load', `move', `print', `shell', `symlink',
`touch' and `uncompress'."
  :group 'dired
  :type '(set (const byte-compile) (const chgrp)
	      (const chmod) (const chown) (const compress)
	      (const copy) (const delete) (const hardlink)
	      (const load) (const move) (const print)
	      (const shell) (const symlink) (const touch)
	      (const uncompress)))

(defun dired-mark-pop-up (bufname op-symbol files function &rest args)
  "Return FUNCTION's result on ARGS after showing which files are marked.
Displays the file names in a buffer named BUFNAME;
 nil gives \" *Marked Files*\".
This uses function `dired-pop-to-buffer' to do that.

FUNCTION should not manipulate files, just read input
 (an argument or confirmation).
The window is not shown if there is just one file or
 OP-SYMBOL is a member of the list in `dired-no-confirm'.
FILES is the list of marked files.  It can also be (t FILENAME)
in the case of one marked file, to distinguish that from using
just the current file."
  (or bufname (setq bufname  " *Marked Files*"))
  (if (or (eq dired-no-confirm t)
	  (memq op-symbol dired-no-confirm)
	  ;; If FILES defaulted to the current line's file.
	  (= (length files) 1))
      (apply function args)
    (with-current-buffer (get-buffer-create bufname)
      (erase-buffer)
      ;; Handle (t FILE) just like (FILE), here.
      ;; That value is used (only in some cases), to mean
      ;; just one file that was marked, rather than the current line file.
      (dired-format-columns-of-files (if (eq (car files) t) (cdr files) files))
      (remove-text-properties (point-min) (point-max)
			      '(mouse-face nil help-echo nil)))
    (save-window-excursion
      (dired-pop-to-buffer bufname)
      (apply function args))))

(defun dired-format-columns-of-files (files)
  ;; Files should be in forward order for this loop.
  ;; i.e., (car files) = first file in buffer.
  ;; Returns the number of lines used.
  (let* ((maxlen (+ 2 (apply 'max (mapcar 'length files))))
	 (width (- (window-width (selected-window)) 2))
	 (columns (max 1 (/ width maxlen)))
	 (nfiles (length files))
	 (rows (+ (/ nfiles columns)
		  (if (zerop (% nfiles columns)) 0 1)))
	 (i 0)
	 (j 0))
    (setq files (nconc (copy-sequence files) ; fill up with empty fns
		       (make-list (- (* columns rows) nfiles) "")))
    (setcdr (nthcdr (1- (length files)) files) files) ; make circular
    (while (< j rows)
      (while (< i columns)
	(indent-to (* i maxlen))
	(insert (car files))
	(setq files (nthcdr rows files)
	      i (1+ i)))
      (insert "\n")
      (setq i 0
	    j (1+ j)
	    files (cdr files)))
    rows))

;; Commands to mark or flag file(s) at or near current line.

(defun dired-repeat-over-lines (arg function)
  ;; This version skips non-file lines.
  (let ((pos (make-marker)))
    (beginning-of-line)
    (while (and (> arg 0) (not (eobp)))
      (setq arg (1- arg))
      (beginning-of-line)
      (while (and (not (eobp)) (dired-between-files)) (forward-line 1))
      (save-excursion
	(forward-line 1)
	(move-marker pos (1+ (point))))
      (save-excursion (funcall function))
      ;; Advance to the next line--actually, to the line that *was* next.
      ;; (If FUNCTION inserted some new lines in between, skip them.)
      (goto-char pos))
    (while (and (< arg 0) (not (bobp)))
      (setq arg (1+ arg))
      (forward-line -1)
      (while (and (not (bobp)) (dired-between-files)) (forward-line -1))
      (beginning-of-line)
      (save-excursion (funcall function)))
    (move-marker pos nil)
    (dired-move-to-filename)))

(defun dired-between-files ()
  ;; This used to be a regexp match of the `total ...' line output by
  ;; ls, which is slightly faster, but that is not very robust; notably,
  ;; it fails for non-english locales.
  (save-excursion (not (dired-move-to-filename))))

(defun dired-next-marked-file (arg &optional wrap opoint)
  "Move to the next marked file, wrapping around the end of the buffer."
  (interactive "p\np")
  (or opoint (setq opoint (point)));; return to where interactively started
  (if (if (> arg 0)
	  (re-search-forward dired-re-mark nil t arg)
	(beginning-of-line)
	(re-search-backward dired-re-mark nil t (- arg)))
      (dired-move-to-filename)
    (if (null wrap)
	(progn
	  (goto-char opoint)
	  (error "No next marked file"))
      (message "(Wraparound for next marked file)")
      (goto-char (if (> arg 0) (point-min) (point-max)))
      (dired-next-marked-file arg nil opoint))))

(defun dired-prev-marked-file (arg &optional wrap)
  "Move to the previous marked file, wrapping around the end of the buffer."
  (interactive "p\np")
  (dired-next-marked-file (- arg) wrap))

(defun dired-file-marker (file)
  ;; Return FILE's marker, or nil if unmarked.
  (save-excursion
    (and (dired-goto-file file)
	 (progn
	   (beginning-of-line)
	   (if (not (equal ?\040 (following-char)))
	       (following-char))))))

(defun dired-mark-files-in-region (start end)
  (let (buffer-read-only)
    (if (> start end)
	(error "start > end"))
    (goto-char start)			; assumed at beginning of line
    (while (< (point) end)
      ;; Skip subdir line and following garbage like the `total' line:
      (while (and (< (point) end) (dired-between-files))
	(forward-line 1))
      (if (and (not (looking-at dired-re-dot))
	       (dired-get-filename nil t))
	  (progn
	    (delete-char 1)
	    (insert dired-marker-char)))
      (forward-line 1))))

(defun dired-mark (arg)
  "Mark the current (or next ARG) files.
If on a subdir headerline, mark all its files except `.' and `..'.

Use \\[dired-unmark-all-files] to remove all marks
and \\[dired-unmark] on a subdir to remove the marks in
this subdir."
  (interactive "P")
  (if (dired-get-subdir)
      (save-excursion (dired-mark-subdir-files))
    (let (buffer-read-only)
      (dired-repeat-over-lines
       (prefix-numeric-value arg)
       (function (lambda () (delete-char 1) (insert dired-marker-char)))))))

(defun dired-unmark (arg)
  "Unmark the current (or next ARG) files.
If looking at a subdir, unmark all its files except `.' and `..'."
  (interactive "P")
  (let ((dired-marker-char ?\040))
    (dired-mark arg)))

(defun dired-flag-file-deletion (arg)
  "In Dired, flag the current line's file for deletion.
With prefix arg, repeat over several lines.

If on a subdir headerline, mark all its files except `.' and `..'."
  (interactive "P")
  (let ((dired-marker-char dired-del-marker))
    (dired-mark arg)))

(defun dired-unmark-backward (arg)
  "In Dired, move up lines and remove deletion flag there.
Optional prefix ARG says how many lines to unflag; default is one line."
  (interactive "p")
  (dired-unmark (- arg)))

(defun dired-toggle-marks ()
  "Toggle marks: marked files become unmarked, and vice versa.
Files marked with other flags (such as `D') are not affected.
`.' and `..' are never toggled.
As always, hidden subdirs are not affected."
  (interactive)
  (save-excursion
    (goto-char (point-min))
    (let (buffer-read-only)
      (while (not (eobp))
        (or (dired-between-files)
            (looking-at dired-re-dot)
            ;; use subst instead of insdel because it does not move
            ;; the gap and thus should be faster and because
            ;; other characters are left alone automatically
            (apply 'subst-char-in-region
                   (point) (1+ (point))
                   (if (eq ?\040 (following-char)) ; SPC
                       (list ?\040 dired-marker-char)
                     (list dired-marker-char ?\040))))
        (forward-line 1)))))

;;; Commands to mark or flag files based on their characteristics or names.

(defvar dired-regexp-history nil
  "History list of regular expressions used in Dired commands.")

(defun dired-read-regexp (prompt)
  (read-from-minibuffer prompt nil nil nil 'dired-regexp-history))

(defun dired-mark-files-regexp (regexp &optional marker-char)
  "Mark all files matching REGEXP for use in later commands.
A prefix argument means to unmark them instead.
`.' and `..' are never marked.

REGEXP is an Emacs regexp, not a shell wildcard.  Thus, use `\\.o$' for
object files--just `.o' will mark more than you might think."
  (interactive
   (list (dired-read-regexp (concat (if current-prefix-arg "Unmark" "Mark")
				    " files (regexp): "))
	 (if current-prefix-arg ?\040)))
  (let ((dired-marker-char (or marker-char dired-marker-char)))
    (dired-mark-if
     (and (not (looking-at dired-re-dot))
	  (not (eolp))			; empty line
	  (let ((fn (dired-get-filename nil t)))
	    (and fn (string-match regexp (file-name-nondirectory fn)))))
     "matching file")))

(defun dired-mark-files-containing-regexp (regexp &optional marker-char)
  "Mark all files with contents containing REGEXP for use in later commands.
A prefix argument means to unmark them instead.
`.' and `..' are never marked."
  (interactive
   (list (dired-read-regexp (concat (if current-prefix-arg "Unmark" "Mark")
				    " files containing (regexp): "))
	 (if current-prefix-arg ?\040)))
  (let ((dired-marker-char (or marker-char dired-marker-char)))
    (dired-mark-if
     (and (not (looking-at dired-re-dot))
	  (not (eolp))			; empty line
	  (let ((fn (dired-get-filename nil t)))
	    (when (and fn (file-readable-p fn)
		       (not (file-directory-p fn)))
	      (let ((prebuf (get-file-buffer fn)))
		(message "Checking %s" fn)
		;; For now we do it inside emacs
		;; Grep might be better if there are a lot of files
		(if prebuf
		    (with-current-buffer prebuf
		      (save-excursion
			(goto-char (point-min))
			(re-search-forward regexp nil t)))
		  (with-temp-buffer
		    (insert-file-contents fn)
		    (goto-char (point-min))
		    (re-search-forward regexp nil t))))
		      )))
     "matching file")))

(defun dired-flag-files-regexp (regexp)
  "In Dired, flag all files containing the specified REGEXP for deletion.
The match is against the non-directory part of the filename.  Use `^'
  and `$' to anchor matches.  Exclude subdirs by hiding them.
`.' and `..' are never flagged."
  (interactive (list (dired-read-regexp "Flag for deletion (regexp): ")))
  (dired-mark-files-regexp regexp dired-del-marker))

(defun dired-mark-symlinks (unflag-p)
  "Mark all symbolic links.
With prefix argument, unflag all those files."
  (interactive "P")
  (let ((dired-marker-char (if unflag-p ?\040 dired-marker-char)))
    (dired-mark-if (looking-at dired-re-sym) "symbolic link")))

(defun dired-mark-directories (unflag-p)
  "Mark all directory file lines except `.' and `..'.
With prefix argument, unflag all those files."
  (interactive "P")
  (let ((dired-marker-char (if unflag-p ?\040 dired-marker-char)))
    (dired-mark-if (and (looking-at dired-re-dir)
			(not (looking-at dired-re-dot)))
		   "directory file")))

(defun dired-mark-executables (unflag-p)
  "Mark all executable files.
With prefix argument, unflag all those files."
  (interactive "P")
  (let ((dired-marker-char (if unflag-p ?\040 dired-marker-char)))
    (dired-mark-if (looking-at dired-re-exe) "executable file")))

;; dired-x.el has a dired-mark-sexp interactive command: mark
;; files for which PREDICATE returns non-nil.

(defun dired-flag-auto-save-files (&optional unflag-p)
  "Flag for deletion files whose names suggest they are auto save files.
A prefix argument says to unflag those files instead."
  (interactive "P")
  (let ((dired-marker-char (if unflag-p ?\040 dired-del-marker)))
    (dired-mark-if
     ;; It is less than general to check for # here,
     ;; but it's the only way this runs fast enough.
     (and (save-excursion (end-of-line)
                          (or
                           (eq (preceding-char) ?#)
                           ;; Handle executables in case of -F option.
                           ;; We need not worry about the other kinds
                           ;; of markings that -F makes, since they won't
                           ;; appear on real auto-save files.
                           (if (eq (preceding-char) ?*)
                               (progn
                                 (forward-char -1)
                                 (eq (preceding-char) ?#)))))
	  (not (looking-at dired-re-dir))
	  (let ((fn (dired-get-filename t t)))
	    (if fn (auto-save-file-name-p
		    (file-name-nondirectory fn)))))
     "auto save file")))

(defcustom dired-garbage-files-regexp
  ;; `log' here is dubious, since it's typically used for useful log
  ;; files, not just TeX stuff.  -- fx
  (concat (regexp-opt
	   '(".log" ".toc" ".dvi" ".bak" ".orig" ".rej" ".aux"))
	  "\\'")
  "Regular expression to match \"garbage\" files for `dired-flag-garbage-files'."
  :type 'regexp
  :group 'dired)

(defun dired-flag-garbage-files ()
  "Flag for deletion all files that match `dired-garbage-files-regexp'."
  (interactive)
  (dired-flag-files-regexp dired-garbage-files-regexp))

(defun dired-flag-backup-files (&optional unflag-p)
  "Flag all backup files (names ending with `~') for deletion.
With prefix argument, unflag these files."
  (interactive "P")
  (let ((dired-marker-char (if unflag-p ?\s dired-del-marker)))
    (dired-mark-if
     ;; Don't call backup-file-name-p unless the last character looks like
     ;; it might be the end of a backup file name.  This isn't very general,
     ;; but it's the only way this runs fast enough.
     (and (save-excursion (end-of-line)
			  ;; Handle executables in case of -F option.
			  ;; We need not worry about the other kinds
			  ;; of markings that -F makes, since they won't
			  ;; appear on real backup files.
			  (if (eq (preceding-char) ?*)
			      (forward-char -1))
			  (eq (preceding-char) ?~))
	  (not (looking-at dired-re-dir))
	  (let ((fn (dired-get-filename t t)))
	    (if fn (backup-file-name-p fn))))
     "backup file")))

(defun dired-change-marks (&optional old new)
  "Change all OLD marks to NEW marks.
OLD and NEW are both characters used to mark files."
  (interactive
   (let* ((cursor-in-echo-area t)
	  (old (progn (message "Change (old mark): ") (read-char)))
	  (new (progn (message  "Change %c marks to (new mark): " old)
		      (read-char))))
     (list old new)))
  (if (or (eq old ?\r) (eq new ?\r))
      (ding)
    (let ((string (format "\n%c" old))
	  (buffer-read-only))
      (save-excursion
	(goto-char (point-min))
	(while (search-forward string nil t)
	  (if (if (= old ?\s)
		  (save-match-data
		    (dired-get-filename 'no-dir t))
		t)
	      (subst-char-in-region (match-beginning 0)
				    (match-end 0) old new)))))))

(defun dired-unmark-all-marks ()
  "Remove all marks from all files in the dired buffer."
  (interactive)
  (dired-unmark-all-files ?\r))

(defun dired-unmark-all-files (mark &optional arg)
  "Remove a specific mark (or any mark) from every file.
After this command, type the mark character to remove,
or type RET to remove all marks.
With prefix arg, query for each marked file.
Type \\[help-command] at that time for help."
  (interactive "cRemove marks (RET means all): \nP")
  (save-excursion
    (let* ((count 0)
	   buffer-read-only case-fold-search query
	   (string (format "\n%c" mark))
	   (help-form "\
Type SPC or `y' to unmark one file, DEL or `n' to skip to next,
`!' to unmark all remaining files with no more questions."))
      (goto-char (point-min))
      (while (if (eq mark ?\r)
		 (re-search-forward dired-re-mark nil t)
	       (search-forward string nil t))
	(if (or (not arg)
		(let ((file (dired-get-filename t t)))
		  (and file
		       (dired-query 'query "Unmark file `%s'? "
				    file))))
	    (progn (subst-char-in-region (1- (point)) (point)
					 (preceding-char) ?\s)
		   (setq count (1+ count)))))
      (message (if (= count 1) "1 mark removed"
		 "%d marks removed")
	       count))))

;; Logging failures operating on files, and showing the results.

(defvar dired-log-buffer "*Dired log*")

(defun dired-why ()
  "Pop up a buffer with error log output from Dired.
A group of errors from a single command ends with a formfeed.
Thus, use \\[backward-page] to find the beginning of a group of errors."
  (interactive)
  (if (get-buffer dired-log-buffer)
      (let ((owindow (selected-window))
	    (window (display-buffer (get-buffer dired-log-buffer))))
	(unwind-protect
	    (progn
	      (select-window window)
	      (goto-char (point-max))
	      (forward-line -1)
	      (backward-page 1)
	      (recenter 0))
	  (select-window owindow)))))

(defun dired-log (log &rest args)
  ;; Log a message or the contents of a buffer.
  ;; If LOG is a string and there are more args, it is formatted with
  ;; those ARGS.  Usually the LOG string ends with a \n.
  ;; End each bunch of errors with (dired-log t):
  ;; this inserts the current time and buffer at the start of the page,
  ;; and \f (formfeed) at the end.
  (let ((obuf (current-buffer)))
    (with-current-buffer (get-buffer-create dired-log-buffer)
      (goto-char (point-max))
      (let ((inhibit-read-only t))
	(cond ((stringp log)
	       (insert (if args
			   (apply (function format) log args)
			 log)))
	      ((bufferp log)
	       (insert-buffer-substring log))
	      ((eq t log)
	       (backward-page 1)
	       (unless (bolp)
		 (insert "\n"))
	       (insert (current-time-string)
		       "\tBuffer `" (buffer-name obuf) "'\n")
	       (goto-char (point-max))
	       (insert "\f\n")))))))

(defun dired-log-summary (string failures)
  "State a summary of a command's failures, in echo area and log buffer.
STRING is an overall summary of the failures.
FAILURES is a list of file names that we failed to operate on,
or nil if file names are not applicable."
  (if (= (length failures) 1)
      (message "%s"
	       (with-current-buffer dired-log-buffer
		 (goto-char (point-max))
		 (backward-page 1)
		 (if (eolp) (forward-line 1))
		 (buffer-substring (point) (point-max))))
    (message (if failures "%s--type ? for details (%s)"
	       "%s--type ? for details")
	     string failures))
  ;; Log a summary describing a bunch of errors.
  (dired-log (concat "\n" string "\n"))
  (dired-log t))

;;; Sorting

;; Most ls can only sort by name or by date (with -t), nothing else.
;; GNU ls sorts on size with -S, on extension with -X, and unsorted with -U.
;; So anything that does not contain these is sort "by name".

(defvar dired-ls-sorting-switches "SXU"
  "String of `ls' switches \(single letters\) except \"t\" that influence sorting.

This indicates to Dired which option switches to watch out for because they
will change the sorting order behavior of `ls'.

To change the default sorting order \(e.g. add a `-v' option\), see the
variable `dired-listing-switches'.  To temporarily override the listing
format, use `\\[universal-argument] \\[dired]'.")

(defvar dired-sort-by-date-regexp
  (concat "^-[^" dired-ls-sorting-switches
	  "]*t[^" dired-ls-sorting-switches "]*$")
  "Regexp recognized by Dired to set `by date' mode.")

(defvar dired-sort-by-name-regexp
  (concat "^-[^t" dired-ls-sorting-switches "]+$")
  "Regexp recognized by Dired to set `by name' mode.")

(defvar dired-sort-inhibit nil
  "Non-nil means the Dired sort command is disabled.
The idea is to set this buffer-locally in special dired buffers.")

(defun dired-sort-set-modeline ()
  ;; Set modeline display according to dired-actual-switches.
  ;; Modeline display of "by name" or "by date" guarantees the user a
  ;; match with the corresponding regexps.  Non-matching switches are
  ;; shown literally.
  (when (eq major-mode 'dired-mode)
    (setq mode-name
	  (let (case-fold-search)
	    (cond ((string-match
		    dired-sort-by-name-regexp dired-actual-switches)
		   "Dired by name")
		  ((string-match
		    dired-sort-by-date-regexp dired-actual-switches)
		   "Dired by date")
		  (t
		   (concat "Dired " dired-actual-switches)))))
    (force-mode-line-update)))

(defun dired-sort-toggle-or-edit (&optional arg)
  "Toggle between sort by date/name and refresh the dired buffer.
With a prefix argument you can edit the current listing switches instead."
  (interactive "P")
  (when dired-sort-inhibit
    (error "Cannot sort this dired buffer"))
  (if arg
      (dired-sort-other
       (read-string "ls switches (must contain -l): " dired-actual-switches))
    (dired-sort-toggle)))

(defun dired-sort-toggle ()
  ;; Toggle between sort by date/name.  Reverts the buffer.
  (setq dired-actual-switches
	(let (case-fold-search)
	  (if (string-match " " dired-actual-switches)
	      ;; New toggle scheme: add/remove a trailing " -t"
	      (if (string-match " -t\\'" dired-actual-switches)
		  (substring dired-actual-switches 0 (match-beginning 0))
		(concat dired-actual-switches " -t"))
	    ;; old toggle scheme: look for some 't' switch and add/remove it
	    (concat
	     "-l"
	     (dired-replace-in-string (concat "[-lt"
					      dired-ls-sorting-switches "]")
				      ""
				      dired-actual-switches)
	     (if (string-match (concat "[t" dired-ls-sorting-switches "]")
			       dired-actual-switches)
		 ""
	       "t")))))
  (dired-sort-set-modeline)
  (revert-buffer))

;; Some user code loads dired especially for this.
;; Don't do that--use replace-regexp-in-string instead.
(defun dired-replace-in-string (regexp newtext string)
  ;; Replace REGEXP with NEWTEXT everywhere in STRING and return result.
  ;; NEWTEXT is taken literally---no \\DIGIT escapes will be recognized.
  (let ((result "") (start 0) mb me)
    (while (string-match regexp string start)
      (setq mb (match-beginning 0)
	    me (match-end 0)
	    result (concat result (substring string start mb) newtext)
	    start me))
    (concat result (substring string start))))

(defun dired-sort-other (switches &optional no-revert)
  "Specify new `ls' SWITCHES for current dired buffer.
Values matching `dired-sort-by-date-regexp' or `dired-sort-by-name-regexp'
set the minor mode accordingly, others appear literally in the mode line.
With optional second arg NO-REVERT, don't refresh the listing afterwards."
  (dired-sort-R-check switches)
  (setq dired-actual-switches switches)
  (dired-sort-set-modeline)
  (or no-revert (revert-buffer)))

(defvar dired-subdir-alist-pre-R nil
  "Value of `dired-subdir-alist' before -R switch added.")
(make-variable-buffer-local 'dired-subdir-alist-pre-R)

(defun dired-sort-R-check (switches)
  "Additional processing of -R in ls option string SWITCHES.
Saves `dired-subdir-alist' when R is set and restores saved value
minus any directories explicitly deleted when R is cleared.
To be called first in body of `dired-sort-other', etc."
  (cond
   ((and (string-match "R" switches)
	 (not (string-match "R" dired-actual-switches)))
    ;; Adding -R to ls switches -- save `dired-subdir-alist':
    (setq dired-subdir-alist-pre-R dired-subdir-alist))
   ((and (string-match "R" dired-actual-switches)
	 (not (string-match "R" switches)))
    ;; Deleting -R from ls switches -- revert to pre-R subdirs
    ;; that are still present:
    (setq dired-subdir-alist
	  (if dired-subdir-alist-pre-R
	      (let (subdirs)
		(while dired-subdir-alist-pre-R
		  (if (assoc (caar dired-subdir-alist-pre-R)
			     dired-subdir-alist)
		      ;; subdir still present...
		      (setq subdirs
			    (cons (car dired-subdir-alist-pre-R)
				  subdirs)))
		  (setq dired-subdir-alist-pre-R
			(cdr dired-subdir-alist-pre-R)))
		(reverse subdirs))
	    ;; No pre-R subdir alist, so revert to main directory
	    ;; listing:
	    (list (car (reverse dired-subdir-alist))))))))


;;;;  Drag and drop support

(defcustom dired-recursive-copies 'top
  "*Decide whether recursive copies are allowed.
A value of nil means no recursive copies.
`always' means copy recursively without asking.
`top' means ask for each directory at top level.
Anything else means ask for each directory."
  :type '(choice :tag "Copy directories"
		 (const :tag "No recursive copies" nil)
		 (const :tag "Ask for each directory" t)
		 (const :tag "Ask for each top directory only" top)
		 (const :tag "Copy directories without asking" always))
  :group 'dired)

(defun dired-dnd-popup-notice ()
  (message-box
   "Recursive copies not enabled.\nSee variable dired-recursive-copies."))


(defun dired-dnd-do-ask-action (uri)
  ;; No need to get actions and descriptions from the source,
  ;; we only have three actions anyway.
  (let ((action (x-popup-menu
		 t
		 (list "What action?"
		       (cons ""
			     '(("Copy here" . copy)
			       ("Move here" . move)
			       ("Link here" . link)
			       "--"
			       ("Cancel" . nil)))))))
    (if action
	(dired-dnd-handle-local-file uri action)
      nil)))

(declare-function dired-relist-entry "dired-aux" (file))
(declare-function make-symbolic-link "fileio.c")

(defun dired-dnd-handle-local-file (uri action)
  "Copy, move or link a file to the dired directory.
URI is the file to handle, ACTION is one of copy, move, link or ask.
Ask means pop up a menu for the user to select one of copy, move or link."
  (require 'dired-aux)
  (let* ((from (dnd-get-local-file-name uri t))
	 (to (if from (concat (dired-current-directory)
			   (file-name-nondirectory from))
	       nil)))
    (if from
	(cond ((or (eq action 'copy)
		   (eq action 'private))	; Treat private as copy.

	       ;; If copying a directory and dired-recursive-copies is nil,
	       ;; dired-copy-file silently fails.  Pop up a notice.
	       (if (and (file-directory-p from)
			(not dired-recursive-copies))
		   (dired-dnd-popup-notice)
		 (progn
		   (dired-copy-file from to 1)
		   (dired-relist-entry to)
		   action)))

	       ((eq action 'move)
		(dired-rename-file from to 1)
		(dired-relist-entry to)
		action)

	       ((eq action 'link)
		(make-symbolic-link from to 1)
		(dired-relist-entry to)
		action)

	       ((eq action 'ask)
		(dired-dnd-do-ask-action uri))

	       (t nil)))))

(defun dired-dnd-handle-file (uri action)
  "Copy, move or link a file to the dired directory if it is a local file.
URI is the file to handle.  If the hostname in the URI isn't local, do nothing.
ACTION is one of copy, move, link or ask.
Ask means pop up a menu for the user to select one of copy, move or link."
  (let ((local-file (dnd-get-local-file-uri uri)))
    (if local-file (dired-dnd-handle-local-file local-file action)
      nil)))


;;;;  Desktop support

(eval-when-compile (require 'desktop))

(defun dired-desktop-buffer-misc-data (desktop-dirname)
  "Auxiliary information to be saved in desktop file."
  (cons
   ;; Value of `dired-directory'.
   (if (consp dired-directory)
       ;; Directory name followed by list of files.
       (cons (desktop-file-name (car dired-directory) desktop-dirname)
             (cdr dired-directory))
     ;; Directory name, optionally with shell wildcard.
     (desktop-file-name dired-directory desktop-dirname))
   ;; Subdirectories in `dired-subdir-alist'.
   (cdr
     (nreverse
       (mapcar
         (function (lambda (f) (desktop-file-name (car f) desktop-dirname)))
         dired-subdir-alist)))))

(defun dired-restore-desktop-buffer (desktop-buffer-file-name
                                     desktop-buffer-name
                                     desktop-buffer-misc)
  "Restore a dired buffer specified in a desktop file."
  ;; First element of `desktop-buffer-misc' is the value of `dired-directory'.
  ;; This value is a directory name, optionally with shell wildcard or
  ;; a directory name followed by list of files.
  (let* ((dired-dir (car desktop-buffer-misc))
         (dir (if (consp dired-dir) (car dired-dir) dired-dir)))
    (if (file-directory-p (file-name-directory dir))
        (progn
          (dired dired-dir)
          ;; The following elements of `desktop-buffer-misc' are the keys
          ;; from `dired-subdir-alist'.
          (mapc 'dired-maybe-insert-subdir (cdr desktop-buffer-misc))
          (current-buffer))
      (message "Desktop: Directory %s no longer exists." dir)
      (when desktop-missing-file-warning (sit-for 1))
      nil)))

(add-to-list 'desktop-buffer-mode-handlers
	     '(dired-mode . dired-restore-desktop-buffer))


(if (eq system-type 'vax-vms)
    (load "dired-vms"))

(provide 'dired)

(run-hooks 'dired-load-hook)		; for your customizations

;; arch-tag: e1af7a8f-691c-41a0-aac1-ddd4d3c87517
;;; dired.el ends here