annotate lisp/ps-samp.el @ 94170:089e514d4665

*** empty log message ***

;;; ps-samp.el --- ps-print sample setup code

;; Copyright (C) 2007, 2008 Free Software Foundation, Inc.

;; Author: Jim Thompson (was <[e-mail]>)
;;	Jacques Duthen (was <[e-mail]>)
;;	Vinicius Jose Latorre <[e-mail]>
;;	Kenichi Handa <[e-mail]> (multi-byte characters)
;; Maintainer: Kenichi Handa <[e-mail]> (multi-byte characters)
;;	Vinicius Jose Latorre <[e-mail]>
;; Keywords: wp, print, PostScript
;; X-URL: http://www.emacswiki.org/cgi-bin/wiki/ViniciusJoseLatorre

;; This file is part of GNU Emacs.

;; GNU Emacs is free software; you can redistribute it and/or modify it under
;; the terms of the GNU General Public License as published by the Free
;; Software Foundation; either version 3, or (at your option) any later
;; version.

;; GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY
;; WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
;; FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
;; details.

;; You should have received a copy of the GNU General Public License along with
;; GNU Emacs; see the file COPYING.  If not, write to the Free Software
;; Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

;;; Commentary:

;; See ps-print.el for documentation.

;;; Code:


(eval-and-compile (require 'ps-print))


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;; Sample Setup Code:


;; This stuff is for anybody that's brave enough to look this far,
;; and able to figure out how to use it.  It isn't really part of
;; ps-print, but I'll leave it here in hopes it might be useful:

;; WARNING!!! The following code is *sample* code only.
;; Don't use it unless you understand what it does!

;; The key `f22' should probably be replaced by `print'.  --Stef

;; A hook to bind to `rmail-mode-hook' to locally bind prsc and set the
;; `ps-left-headers' specially for mail messages.
(defun ps-rmail-mode-hook ()
  (local-set-key [(f22)] 'ps-rmail-print-message-from-summary)
  (setq ps-header-lines 3
	ps-left-header
	;; The left headers will display the message's subject, its
	;; author, and the name of the folder it was in.
	'(ps-article-subject ps-article-author buffer-name)))

;; See `ps-gnus-print-article-from-summary'.  This function does the
;; same thing for rmail.
(defun ps-rmail-print-message-from-summary ()
  (interactive)
  (ps-print-message-from-summary 'rmail-summary-buffer "RMAIL"))

;; Used in `ps-rmail-print-article-from-summary',
;; `ps-gnus-print-article-from-summary' and `ps-vm-print-message-from-summary'.
(defun ps-print-message-from-summary (summary-buffer summary-default)
  (let ((ps-buf (or (and (boundp summary-buffer)
			 (symbol-value summary-buffer))
		    summary-default)))
    (and (get-buffer ps-buf)
	 (save-excursion
	   (set-buffer ps-buf)
	   (ps-spool-buffer-with-faces)))))

;; Look in an article or mail message for the Subject: line.  To be
;; placed in `ps-left-headers'.
(defun ps-article-subject ()
  (save-excursion
    (goto-char (point-min))
    (if (re-search-forward "^Subject:[ \t]+\\(.*\\)$" nil t)
	(buffer-substring (match-beginning 1) (match-end 1))
      "Subject ???")))

;; Look in an article or mail message for the From: line.  Sorta-kinda
;; understands RFC-822 addresses and can pull the real name out where
;; it's provided.  To be placed in `ps-left-headers'.
(defun ps-article-author ()
  (save-excursion
    (goto-char (point-min))
    (if (re-search-forward "^From:[ \t]+\\(.*\\)$" nil t)
	(let ((fromstring (buffer-substring (match-beginning 1) (match-end 1))))
	  (cond

	   ;; Try first to match addresses that look like
	   ;; [e-mail] (Jim Thompson)
	   ((string-match ".*[ \t]+(\\(.*\\))" fromstring)
	    (substring fromstring (match-beginning 1) (match-end 1)))

	   ;; Next try to match addresses that look like
	   ;; Jim Thompson <[e-mail]> or
	   ;; "Jim Thompson" <[e-mail]>
	   ((string-match "\\(\"?\\)\\(.*\\)\\1[ \t]+<.*>" fromstring)
	    (substring fromstring (match-beginning 2) (match-end 2)))

	   ;; Couldn't find a real name -- show the address instead.
	   (t fromstring)))
      "From ???")))

;; A hook to bind to `gnus-article-prepare-hook'.  This will set the
;; `ps-left-headers' specially for gnus articles.  Unfortunately,
;; `gnus-article-mode-hook' is called only once, the first time the *Article*
;; buffer enters that mode, so it would only work for the first time
;; we ran gnus.  The second time, this hook wouldn't get set up.  The
;; only alternative is `gnus-article-prepare-hook'.
(defun ps-gnus-article-prepare-hook ()
  (setq ps-header-lines 3
	ps-left-header
	;; The left headers will display the article's subject, its
	;; author, and the newsgroup it was in.
	'(ps-article-subject ps-article-author gnus-newsgroup-name)))

;; A hook to bind to `vm-mode-hook' to locally bind prsc and set the
;; `ps-left-headers' specially for mail messages.
(defun ps-vm-mode-hook ()
  (local-set-key [(f22)] 'ps-vm-print-message-from-summary)
  (setq ps-header-lines 3
	ps-left-header
	;; The left headers will display the message's subject, its
	;; author, and the name of the folder it was in.
	'(ps-article-subject ps-article-author buffer-name)))

;; Every now and then I forget to switch from the *Summary* buffer to
;; the *Article* before hitting prsc, and a nicely formatted list of
;; article subjects shows up at the printer.  This function, bound to
;; prsc for the gnus *Summary* buffer means I don't have to switch
;; buffers first.
;; sb:  Updated for Gnus 5.
(defun ps-gnus-print-article-from-summary ()
  (interactive)
  (ps-print-message-from-summary 'gnus-article-buffer "*Article*"))

;; See `ps-gnus-print-article-from-summary'.  This function does the
;; same thing for vm.
(defun ps-vm-print-message-from-summary ()
  (interactive)
  (ps-print-message-from-summary 'vm-mail-buffer ""))

;; A hook to bind to bind to `gnus-summary-setup-buffer' to locally bind
;; prsc.
(defun ps-gnus-summary-setup ()
  (local-set-key [(f22)] 'ps-gnus-print-article-from-summary))

;; Look in an article or mail message for the Subject: line.  To be
;; placed in `ps-left-headers'.
(defun ps-info-file ()
  (save-excursion
    (goto-char (point-min))
    (if (re-search-forward "File:[ \t]+\\([^, \t\n]*\\)" nil t)
	(buffer-substring (match-beginning 1) (match-end 1))
      "File ???")))

;; Look in an article or mail message for the Subject: line.  To be
;; placed in `ps-left-headers'.
(defun ps-info-node ()
  (save-excursion
    (goto-char (point-min))
    (if (re-search-forward "Node:[ \t]+\\([^,\t\n]*\\)" nil t)
	(buffer-substring (match-beginning 1) (match-end 1))
      "Node ???")))

(defun ps-info-mode-hook ()
  (setq ps-left-header
	;; The left headers will display the node name and file name.
	'(ps-info-node ps-info-file)))

;; WARNING! The following function is a *sample* only, and is *not*
;; meant to be used as a whole unless you understand what the effects
;; will be!  (In fact, this is a copy of Jim's setup for ps-print --
;; I'd be very surprised if it was useful to *anybody*, without
;; modification.)

(defun ps-jts-ps-setup ()
  (global-set-key [(f22)] 'ps-spool-buffer-with-faces) ;f22 is prsc
  (global-set-key [(shift f22)] 'ps-spool-region-with-faces)
  (global-set-key [(control f22)] 'ps-despool)
  (add-hook 'gnus-article-prepare-hook 'ps-gnus-article-prepare-hook)
  (add-hook 'gnus-summary-mode-hook 'ps-gnus-summary-setup)
  (add-hook 'vm-mode-hook 'ps-vm-mode-hook)
  (add-hook 'vm-mode-hooks 'ps-vm-mode-hook)
  (add-hook 'Info-mode-hook 'ps-info-mode-hook)
  (setq ps-spool-duplex t
	ps-print-color-p nil
	ps-lpr-command "lpr"
	ps-lpr-switches '("-Jjct,duplex_long"))
  'ps-jts-ps-setup)

;; WARNING! The following function is a *sample* only, and is *not*
;; meant to be used as a whole unless it corresponds to your needs.
;; (In fact, this is a copy of Jack's setup for ps-print --
;; I would not be that surprised if it was useful to *anybody*,
;; without modification.)

(defun ps-jack-setup ()
  (setq ps-print-color-p  nil
	ps-lpr-command    "lpr"
	ps-lpr-switches   nil

	ps-paper-type        'a4
	ps-landscape-mode    t
	ps-number-of-columns 2

	ps-left-margin   (/ (* 72  1.0) 2.54) ;  1.0 cm
	ps-right-margin  (/ (* 72  1.0) 2.54) ;  1.0 cm
	ps-inter-column  (/ (* 72  1.0) 2.54) ;  1.0 cm
	ps-bottom-margin (/ (* 72  1.5) 2.54) ;  1.5 cm
	ps-top-margin    (/ (* 72  1.5) 2.54) ;  1.5 cm
	ps-header-offset (/ (* 72  1.0) 2.54) ;  1.0 cm
	ps-header-line-pad    .15
	ps-print-header       t
	ps-print-header-frame t
	ps-header-lines       2
	ps-show-n-of-n        t
	ps-spool-duplex       nil

	ps-font-family             'Courier
	ps-font-size               5.5
	ps-header-font-family      'Helvetica
	ps-header-font-size        6
	ps-header-title-font-size  8)
  'ps-jack-setup)


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;; If zeroconf is enabled, all CUPS printers can be detected.  The
;; "Postscript printer" menu will be modified dynamically, as printers
;; are added or removed.

;; Preconditions:
;;
;; * Emacs has D-Bus support enabled.  That is, D-Bus is installed on
;;   the system, and Emacs has been configured and built with the
;;   --with-dbus option.
;;
;; * The zeroconf daemon avahi-daemon is running.
;;
;; * CUPS has enabled the option "Share published printers connected
;;   to this system" (see <http://localhost:631/admin>).

(eval-when-compile
  (require 'cl))

(eval-and-compile
  (require 'printing)
  (require 'zeroconf))

;; Add a Postscript printer to the "Postscript printer" menu.
(defun ps-add-printer (service)
  (let ((name (zeroconf-service-name service))
	(text (zeroconf-service-txt service))
	(addr (zeroconf-service-address service))
	(port (zeroconf-service-port service))
	is-ps cups-queue)
    ;; `text' is an array of key=value strings like ("Duplex=T" "Copies=T").
    (dolist (string text)
      (let ((split (split-string string "=" t)))
	;; If it is a Postscript printer, there must be a string like
	;; "pdl=application/postscript,application/vnd.hp-PCL,...".
	(when (and (string-equal "pdl" (car split))
		   (string-match "application/postscript" (cadr split)))
	  (setq is-ps t))
	;; A CUPS printer queue is coded as "rp=printers/<name>".
	(when (and (string-equal "rp" (car split))
		   (string-match "printers/\\(.+\\)" (cadr split)))
	  (setq cups-queue (match-string 1 (cadr split))))))
    ;; Add the printer.
    (when is-ps
      (if cups-queue
	  (add-to-list
	   'pr-ps-printer-alist (list (intern name) "lpr" nil "-P" cups-queue))
	;; No CUPS printer, but a network printer.
	(add-to-list
	 'pr-ps-printer-alist (list (intern name) "cupsdoprint"
				    '("-P" "default")
				    "-H" (format "%s:%s" addr port))))
      (pr-update-menus t))))

;; Remove a printer from the "Postscript printer" menu.
(defun ps-remove-printer (service)
  (setq pr-ps-printer-alist
	(delete (assoc (intern (zeroconf-service-name service))
		       pr-ps-printer-alist)
		pr-ps-printer-alist))
  (pr-update-menus t))

;; Activate the functions in zeroconf.
(defun ps-make-dynamic-printer-menu ()
  (when (featurep 'dbusbind)
    (zeroconf-init)
    (zeroconf-service-add-hook "_ipp._tcp" :new 'ps-add-printer)
    (zeroconf-service-add-hook "_ipp._tcp" :removed 'ps-remove-printer)))


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

(provide 'ps-samp)

;; arch-tag: 99c415d3-be39-43c6-aa32-7ee33ba19600
;;; ps-samp.el ends here