annotate install-sh @ 38514:10482dd382e7

* viper-ex.el (ex-token-list,ex-cmd-execute): Revamped, courtesy of Scott Bronson. (ex-cmd-assoc,ex-compile,ex-cmd-one-letr): New functions. (viper-check-sub,viper-get-ex-command,viper-execute-ex-command): Deleted functions. (viper-get-ex-com-subr,viper-ex,ex-mark): Changed to use the new ex-token-list. (viper-get-ex-address-subr): convert registers to char data type. * viper-util.el (viper-int-to-char,viper-char-equal): new functions. (viper-memq-char): use viper-int-to-char. (viper-file-checked-in-p): use vc-locking-user, if vc doesn't have vc-locking-state. (viper-read-key): use viper-read-key-sequence. * viper.el (viper-major-mode-modifier-list): added inferior-emacs-lisp-mode. (this-major-mode-requires-vi-state): new function that uses simple heuristics to decide if vi state is appropriate. (set-viper-state-in-major-mode): use this-major-mode-requires-vi-state. (viper-non-hook-settings): don't advise read-key-sequence. (viper-read-key-sequence): new function that replaces the previously used advice to read-key-sequence. * viper-cmd.el (viper-test-com-defun,viper-exec-change, viper-exec-Change,viper-execute-com,viper-insert,viper-append, viper-Append,viper-Insert,viper-open-line,viper-Open-line, viper-open-line-at-point,viper-substitute,viper-overwrite, viper-replace-char-subr,viper-forward-word,viper-forward-Word): got rid of the negative character hack. (viper-escape-to-state,viper-replace-state-exit-cmd): use viper-read-key-sequence. (viper-envelop-ESC-key): no need for ad-get-orig-definition. (viper-minibuffer-standard-hook,viper-read-string-with-history): don't override existing minibuffer-setup-hook. (viper-mark-point,viper-goto-mark-subr,viper-brac-function): convert registers to char data type. (viper-autoindent): use viper-indent-line. * viper-keym.el: use viper-exec-key-in-emacs. * viper.texi: Added credits, new commands, like :make. * ediff-util.el: Copyright years. (ediff-choose-syntax-table): New function. (ediff-setup): Use ediff-choose-syntax-table. (ediff-file-checked-out-p,ediff-file-checked-in-p): check if vc-state is available. (ediff-make-temp-file): use ediff-coding-system-for-write. * ediff-init.el (ediff-with-syntax-table): New macro, uses with-syntax-table. (ediff-coding-system-for-read): from ediff-diff.el (ediff-coding-system-for-write): new variable. (ediff-highest-priority): fixed the bug having to do with disappearing overlays. (ediff-file-remote-p): use file-remote-p, if available. (ediff-listable-file): new function. (ediff-file-attributes): use ediff-listable-file. * ediff-mult.el (ediff-meta-insert-file-info1): use ediff-listable-file. * ediff-ptch.el (ediff-prompt-for-patch-file): use ediff-coding-system-for-read. (ediff-patch-file-internal): use ediff-coding-system-for-write. * ediff-diff.el (ediff-coding-system-for-read): moved to ediff-init.el. (ediff-match-diff3-line,ediff-get-diff3-group): improved pattern. * ediff.el: Date of last update, copyright years. * ediff-wind (ediff-setup-control-frame): Nill->nil. * ediff.texi: added clarifications, acknowledgements.

#! /bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission.  M.I.T. makes no representations about the
# suitability of this software for any purpose.  It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.  It can only install one file at a time, a restriction
# shared with many OS's install programs.


# set DOITPROG to echo to test this script

# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"


# put in absolute paths if you don't have them in your path; or use env. vars.

mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"

transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""

while [ x"$1" != x ]; do
    case $1 in
	-c) instcmd="$cpprog"
	    shift
	    continue;;

	-d) dir_arg=true
	    shift
	    continue;;

	-m) chmodcmd="$chmodprog $2"
	    shift
	    shift
	    continue;;

	-o) chowncmd="$chownprog $2"
	    shift
	    shift
	    continue;;

	-g) chgrpcmd="$chgrpprog $2"
	    shift
	    shift
	    continue;;

	-s) stripcmd="$stripprog"
	    shift
	    continue;;

	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
	    shift
	    continue;;

	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
	    shift
	    continue;;

	*)  if [ x"$src" = x ]
	    then
		src=$1
	    else
		# this colon is to work around a 386BSD /bin/sh bug
		:
		dst=$1
	    fi
	    shift
	    continue;;
    esac
done

if [ x"$src" = x ]
then
	echo "install:	no input file specified"
	exit 1
else
	true
fi

if [ x"$dir_arg" != x ]; then
	dst=$src
	src=""
	
	if [ -d $dst ]; then
		instcmd=:
	else
		instcmd=mkdir
	fi
else

# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad 
# if $src (and thus $dsttmp) contains '*'.

	if [ -f $src -o -d $src ]
	then
		true
	else
		echo "install:  $src does not exist"
		exit 1
	fi
	
	if [ x"$dst" = x ]
	then
		echo "install:	no destination specified"
		exit 1
	else
		true
	fi

# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic

	if [ -d $dst ]
	then
		dst="$dst"/`basename $src`
	else
		true
	fi
fi

## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`

# Make sure that the destination directory exists.
#  this part is taken from Noah Friedman's mkinstalldirs script

# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='	
'
IFS="${IFS-${defaultIFS}}"

oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"

pathcomp=''

while [ $# -ne 0 ] ; do
	pathcomp="${pathcomp}${1}"
	shift

	if [ ! -d "${pathcomp}" ] ;
        then
		$mkdirprog "${pathcomp}"
	else
		true
	fi

	pathcomp="${pathcomp}/"
done
fi

if [ x"$dir_arg" != x ]
then
	$doit $instcmd $dst &&

	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else

# If we're going to rename the final executable, determine the name now.

	if [ x"$transformarg" = x ] 
	then
		dstfile=`basename $dst`
	else
		dstfile=`basename $dst $transformbasename | 
			sed $transformarg`$transformbasename
	fi

# don't allow the sed command to completely eliminate the filename

	if [ x"$dstfile" = x ] 
	then
		dstfile=`basename $dst`
	else
		true
	fi

# Make a temp file name in the proper directory.

	dsttmp=$dstdir/#inst.$$#

# Move or copy the file name to the temp name

	$doit $instcmd $src $dsttmp &&

	trap "rm -f ${dsttmp}" 0 &&

# and set any options; do chmod last to preserve setuid bits

# If any of these fail, we abort the whole thing.  If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.

	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&

# Now rename the file to the real destination.

	$doit $rmcmd -f $dstdir/$dstfile &&
	$doit $mvcmd $dsttmp $dstdir/$dstfile 

fi &&


exit 0