annotate lisp/loadup.el @ 1686:10650dfc82d0

* Makefile.in (install, install.sysv, install.xenix, install.aix): Install the info files in ${infodir}. Install the executable under both `emacs' and `emacs-VERSION'. * Makefile.in: Doc fix. * Makefile.in (exec_prefix): New variable, as per latest version of coding standards. (bindir, libdir): Use it, instead of `prefix'. (lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile. * Makefile.in (mandir): Make the default value for this depend on $(prefix). * Makefile.in (datadir, statedir, libdir): Make these all default to ${prefix}/lib. (lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted to compensate. * Makefile.in (install, install.sysv, install.xenix, install.aix): Install the etags and ctags man pages too. * Makefile.in (distclean): Don't delete backup files; that's the job of extraclean. (extraclean): Like distclean, but deletes backup and autosave files. Make path specification conform to GNU coding standards. * configure (long_usage): Remove all traces of old arguments from usage messages, and document the options we do accept in more detail: -with-x... and --srcdir. (options, boolean_opts): Deleted; we don't have enough options to make this worthwhile. (prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted, along with the code which supported them; these should be set as arguments to the top-level make. (config_h_opts): Since this no longer doubles as a list of option names, make them upper case; this simplifies the code which uses them to build the sed command to edit src/config.h. Change the code which sets them. (cc, g, O): Don't allow the user to set these using options; they should be specified using `CC=' and `CFLAGS=' arguments to the top-level make. Just choose reasonable default values for them, and edit them into Makefile.in's default CC and CONFIG_CFLAGS values. (gnu_malloc, rel_alloc): Don't allow the user to set these using options; use them whenever the configuration files say they're possible. Simplify the argument processing loop. Don't accept abbreviations for option names; these might conflict with other configuration options in the future. Add some support for the `--srcdir' option. Check for the sources in . and .. if `--srcdir' is omitted. If the directories we will compile in don't exist yet, create them under the current directory. Note that the rest of the build process doesn't really support this. Edit only the top Makefile. That should edit the others. Edit into the makefile: `version', from lisp/version.el, `configname' and `srcdir' from the configuration arguments, `CC' and `CONFIG_CFLAGS' as guessed from the presence or absence of GCC in the user's path, and LOADLIBES as gleaned from the system description files. Simplify the report generated; it doesn't need to include any description of paths now. Make `config.status' exec configure instead of just calling it, so there's no harm in overwriting `config.status'. * Makefile.in (version, configname): New variables, used to choose the default values for datadir and libdir. Path variables rearranged into two clearer groups: - In the first group are the variables specified by the GNU coding standards (prefix, bindir, datadir, statedir, libdir, mandir, manext, infodir, and srcdir). - In the second are the variables actually used for Emacs's paths (lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir, archlibdir), which depend on the first category. datadir and libdir default to directories under ${prefix}/lib/emacs instead of ${prefix}/emacs, by popular demand. etcdir and lispdir default to subdirectories of datadir. archlibdir defaults to libdir. The new installation tree is a bit deeper than it used to be, so use the new make-path program in lib-src to build them all. Always build a new src/paths.h.tmp and then move-if-change it to src/paths.h, to avoid unnecessary rebuilds while responding to the right changes. Remove all mention of arch-lib. Run utility commands from lib-src, and let the executables be copied into archlibdir when Emacs is installed. Add targets for src/Makefile, lib-src/Makefile, and oldXMenu/Makefile, editing the values of the path variables into them. Let lib-src do its own installation. (datadir): Default to putting data files under ${prefix}/lib/emacs/${version}, not /usr/local/emacs. (emacsdir): Variable deleted; it would only be confusing to use. (lispdir, etcdir): Default to ${datadir}/lisp. (mkdir): Use make-path for this. (lockdir): Do this in mkdir. (Makefile): New target.

;;; loadup.el --- load up standardly loaded Lisp files for Emacs.

;; Copyright (C) 1985, 1986, 1992 Free Software Foundation, Inc.

;; Maintainer: FSF
;; Keywords: internal

;; This file is part of GNU Emacs.

;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING.  If not, write to
;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.

;;; Commentary:

;; This is loaded into a bare Emacs to make a dumpable one.

;;; Code:

;;; We don't want to have any undo records in the dumped Emacs.
(buffer-disable-undo "*scratch*")

(load "subr")
(garbage-collect)
(load "byte-run")
(garbage-collect)
(load "map-ynp")
(garbage-collect)
(load "loaddefs.el")  ;Don't get confused if someone compiled loaddefs by mistake.
(garbage-collect)
(load "simple")
(garbage-collect)
(load "help")
(garbage-collect)
(load "files")
(garbage-collect)
(load "indent")
(garbage-collect)
(load "window")
(garbage-collect)
(if (fboundp 'delete-frame)
    (load "frame"))
(garbage-collect)
(load "paths.el")  ;Don't get confused if someone compiled paths by mistake.
(garbage-collect)
(load "startup")
(garbage-collect)
(load "lisp")
(garbage-collect)
(load "page")
(garbage-collect)
(load "register")
(garbage-collect)
(load "paragraphs")
(garbage-collect)
(load "lisp-mode")
(garbage-collect)
(load "text-mode")
(garbage-collect)
(load "fill")
(garbage-collect)
(load "c-mode")
(garbage-collect)
(load "isearch")
(garbage-collect)
(load "replace")
(if (eq system-type 'vax-vms)
    (progn
      (garbage-collect)
      (load "vmsproc")))
(garbage-collect)
(load "abbrev")
(garbage-collect)
(load "buff-menu")
(if (eq system-type 'vax-vms)
    (progn
      (garbage-collect)
      (load "vms-patch")))
(if (fboundp 'atan)	; preload some constants and 
    (progn		; floating pt. functions if 
      (garbage-collect)	; we have float support.
      (load "float-sup")))
(garbage-collect)
(load "vc-hooks")

;If you want additional libraries to be preloaded and their
;doc strings kept in the DOC file rather than in core,
;you may load them with a "site-load.el" file.
;But you must also cause them to be scanned when the DOC file
;is generated.  For VMS, you must edit ../vms/makedoc.com.
;For other systems, you must edit ../src/ymakefile.
(if (load "site-load" t)
    (garbage-collect))

(load "version.el")  ;Don't get confused if someone compiled version.el by mistake.

;; Note: all compiled Lisp files loaded above this point
;; must be among the ones parsed by make-docfile
;; to construct DOC.  Any that are not processed
;; for DOC will not have doc strings in the dumped Emacs.

(message "Finding pointers to doc strings...")
(if (fboundp 'dump-emacs)
    (let ((name emacs-version))
      (while (string-match "[^-+_.a-zA-Z0-9]+" name)
	(setq name (concat (downcase (substring name 0 (match-beginning 0)))
			   "-"
			   (substring name (match-end 0)))))
      (setq name (concat (expand-file-name "../etc/DOC-") name))
      (if (file-exists-p name)
	  (delete-file name))
      (copy-file (expand-file-name "../etc/DOC") name t)
      (Snarf-documentation (file-name-nondirectory name)))
    (Snarf-documentation "DOC"))
(message "Finding pointers to doc strings...done")

;Note: You can cause additional libraries to be preloaded
;by writing a site-init.el that loads them.
;See also "site-load" above.
(load "site-init" t)
(garbage-collect)

;;; At this point, we're ready to resume undo recording for scratch.
(buffer-enable-undo "*scratch*")

(if (or (equal (nth 3 command-line-args) "dump")
	(equal (nth 4 command-line-args) "dump"))
    (if (eq system-type 'vax-vms)
	(progn 
	  (message "Dumping data as file temacs.dump")
	  (dump-emacs "temacs.dump" "temacs")
	  (kill-emacs))
      (let ((name (concat "emacs-" emacs-version)))
	(while (string-match "[^-+_.a-zA-Z0-9]+" name)
	  (setq name (concat (downcase (substring name 0 (match-beginning 0)))
			     "-"
			     (substring name (match-end 0)))))
	(message "Dumping under names xemacs and %s" name))
      (condition-case ()
	  (delete-file "xemacs")
	(file-error nil))
      (dump-emacs "xemacs" "temacs")
      ;; Recompute NAME now, so that it isn't set when we dump.
      (let ((name (concat "emacs-" emacs-version)))
	(while (string-match "[^-+_.a-zA-Z0-9]+" name)
	  (setq name (concat (downcase (substring name 0 (match-beginning 0)))
			     "-"
			     (substring name (match-end 0)))))
	(add-name-to-file "xemacs" name t))
      (kill-emacs)))

;; Avoid error if user loads some more libraries now.
(setq purify-flag nil)

;; For machines with CANNOT_DUMP defined in config.h,
;; this file must be loaded each time Emacs is run.
;; So run the startup code now.

(or (fboundp 'dump-emacs)
    (eval top-level))

;;; loadup.el ends here