Mercurial > emacs
annotate src/vmsmap.c @ 7344:17a251bf595b
(frame-notice-user-settings): Use geometry parms from frame
when the initial specifications did not have them.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Fri, 06 May 1994 00:32:58 +0000 |
parents | 1fc792473491 |
children | ac7375e60931 |
rev | line source |
---|---|
484 | 1 /* VMS mapping of data and alloc arena for GNU Emacs. |
2 Copyright (C) 1986, 1987 Free Software Foundation, Inc. | |
3 | |
4 This file is part of GNU Emacs. | |
5 | |
6 GNU Emacs is free software; you can redistribute it and/or modify | |
7 it under the terms of the GNU General Public License as published by | |
8 the Free Software Foundation; either version 1, or (at your option) | |
9 any later version. | |
10 | |
11 GNU Emacs is distributed in the hope that it will be useful, | |
12 but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 GNU General Public License for more details. | |
15 | |
16 You should have received a copy of the GNU General Public License | |
17 along with GNU Emacs; see the file COPYING. If not, write to | |
18 the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ | |
19 | |
20 /* Written by Mukesh Prasad. */ | |
21 | |
22 #ifdef VMS | |
23 | |
4696
1fc792473491
Include <config.h> instead of "config.h".
Roland McGrath <roland@gnu.org>
parents:
484
diff
changeset
|
24 #include <config.h> |
484 | 25 #include "lisp.h" |
26 #include <rab.h> | |
27 #include <fab.h> | |
28 #include <rmsdef.h> | |
29 #include <secdef.h> | |
30 | |
31 /* RMS block size */ | |
32 #define BLOCKSIZE 512 | |
33 | |
34 /* Maximum number of bytes to be written in one RMS write. | |
35 * Must be a multiple of BLOCKSIZE. | |
36 */ | |
37 #define MAXWRITE (BLOCKSIZE * 30) | |
38 | |
39 /* This funniness is to ensure that sdata occurs alphabetically BEFORE the | |
40 $DATA psect and that edata occurs after ALL Emacs psects. This is | |
41 because the VMS linker sorts all psects in a cluster alphabetically | |
42 during the linking, unless you use the cluster_psect command. Emacs | |
43 uses the cluster command to group all Emacs psects into one cluster; | |
44 this keeps the dumped data separate from any loaded libraries. */ | |
45 | |
46 globaldef {"$D$ATA"} char sdata[512]; /* Start of saved data area */ | |
47 globaldef {"__DATA"} char edata[512]; /* End of saved data area */ | |
48 | |
49 /* Structure to write into first block of map file. | |
50 */ | |
51 | |
52 struct map_data | |
53 { | |
54 char * sdata; /* Start of data area */ | |
55 char * edata; /* End of data area */ | |
56 int datablk; /* Block in file to map data area from/to */ | |
57 }; | |
58 | |
59 static void fill_fab (), fill_rab (); | |
60 static int write_data (); | |
61 | |
62 extern char *start_of_data (); | |
63 extern int vms_out_initial; /* Defined in malloc.c */ | |
64 | |
65 /* Maps in the data and alloc area from the map file. | |
66 */ | |
67 | |
68 int | |
69 mapin_data (name) | |
70 char * name; | |
71 { | |
72 struct FAB fab; | |
73 struct RAB rab; | |
74 int status, size; | |
75 int inadr[2]; | |
76 struct map_data map_data; | |
77 | |
78 /* Open map file. */ | |
79 fab = cc$rms_fab; | |
80 fab.fab$b_fac = FAB$M_BIO|FAB$M_GET; | |
81 fab.fab$l_fna = name; | |
82 fab.fab$b_fns = strlen (name); | |
83 status = sys$open (&fab); | |
84 if (status != RMS$_NORMAL) | |
85 { | |
86 printf ("Map file not available, running bare Emacs....\n"); | |
87 return 0; /* Map file not available */ | |
88 } | |
89 /* Connect the RAB block */ | |
90 rab = cc$rms_rab; | |
91 rab.rab$l_fab = &fab; | |
92 rab.rab$b_rac = RAB$C_SEQ; | |
93 rab.rab$l_rop = RAB$M_BIO; | |
94 status = sys$connect (&rab); | |
95 if (status != RMS$_NORMAL) | |
96 lib$stop (status); | |
97 /* Read the header data */ | |
98 rab.rab$l_ubf = &map_data; | |
99 rab.rab$w_usz = sizeof (map_data); | |
100 rab.rab$l_bkt = 0; | |
101 status = sys$read (&rab); | |
102 if (status != RMS$_NORMAL) | |
103 lib$stop (status); | |
104 status = sys$close (&fab); | |
105 if (status != RMS$_NORMAL) | |
106 lib$stop (status); | |
107 if (map_data.sdata != start_of_data ()) | |
108 { | |
109 printf ("Start of data area has moved: cannot map in data.\n"); | |
110 return 0; | |
111 } | |
112 if (map_data.edata != edata) | |
113 { | |
114 printf ("End of data area has moved: cannot map in data.\n"); | |
115 return 0; | |
116 } | |
117 fab.fab$l_fop |= FAB$M_UFO; | |
118 status = sys$open (&fab); | |
119 if (status != RMS$_NORMAL) | |
120 lib$stop (status); | |
121 /* Map data area. */ | |
122 inadr[0] = map_data.sdata; | |
123 inadr[1] = map_data.edata; | |
124 status = sys$crmpsc (inadr, 0, 0, SEC$M_CRF | SEC$M_WRT, 0, 0, 0, | |
125 fab.fab$l_stv, 0, map_data.datablk, 0, 0); | |
126 if (! (status & 1)) | |
127 lib$stop (status); | |
128 } | |
129 | |
130 /* Writes the data and alloc area to the map file. | |
131 */ | |
132 mapout_data (into) | |
133 char * into; | |
134 { | |
135 struct FAB fab; | |
136 struct RAB rab; | |
137 int status; | |
138 struct map_data map_data; | |
139 int datasize, msize; | |
140 | |
141 if (vms_out_initial) | |
142 { | |
143 error ("Out of initial allocation. Must rebuild emacs with more memory (VMS_ALLOCATION_SIZE)."); | |
144 return 0; | |
145 } | |
146 map_data.sdata = start_of_data (); | |
147 map_data.edata = edata; | |
148 datasize = map_data.edata - map_data.sdata + 1; | |
149 map_data.datablk = 2 + (sizeof (map_data) + BLOCKSIZE - 1) / BLOCKSIZE; | |
150 /* Create map file. */ | |
151 fab = cc$rms_fab; | |
152 fab.fab$b_fac = FAB$M_BIO|FAB$M_PUT; | |
153 fab.fab$l_fna = into; | |
154 fab.fab$b_fns = strlen (into); | |
155 fab.fab$l_fop = FAB$M_CBT; | |
156 fab.fab$b_org = FAB$C_SEQ; | |
157 fab.fab$b_rat = 0; | |
158 fab.fab$b_rfm = FAB$C_VAR; | |
159 fab.fab$l_alq = 1 + map_data.datablk + | |
160 ((datasize + BLOCKSIZE - 1) / BLOCKSIZE); | |
161 status = sys$create (&fab); | |
162 if (status != RMS$_NORMAL) | |
163 { | |
164 error ("Could not create map file"); | |
165 return 0; | |
166 } | |
167 /* Connect the RAB block */ | |
168 rab = cc$rms_rab; | |
169 rab.rab$l_fab = &fab; | |
170 rab.rab$b_rac = RAB$C_SEQ; | |
171 rab.rab$l_rop = RAB$M_BIO; | |
172 status = sys$connect (&rab); | |
173 if (status != RMS$_NORMAL) | |
174 { | |
175 error ("RMS connect to map file failed"); | |
176 return 0; | |
177 } | |
178 /* Write the header */ | |
179 rab.rab$l_rbf = &map_data; | |
180 rab.rab$w_rsz = sizeof (map_data); | |
181 status = sys$write (&rab); | |
182 if (status != RMS$_NORMAL) | |
183 { | |
184 error ("RMS write (header) to map file failed"); | |
185 return 0; | |
186 } | |
187 if (! write_data (&rab, map_data.datablk, map_data.sdata, datasize)) | |
188 return 0; | |
189 status = sys$close (&fab); | |
190 if (status != RMS$_NORMAL) | |
191 { | |
192 error ("RMS close on map file failed"); | |
193 return 0; | |
194 } | |
195 return 1; | |
196 } | |
197 | |
198 static int | |
199 write_data (rab, firstblock, data, length) | |
200 struct RAB * rab; | |
201 char * data; | |
202 { | |
203 int status; | |
204 | |
205 rab->rab$l_bkt = firstblock; | |
206 while (length > 0) | |
207 { | |
208 rab->rab$l_rbf = data; | |
209 rab->rab$w_rsz = length > MAXWRITE ? MAXWRITE : length; | |
210 status = sys$write (rab, 0, 0); | |
211 if (status != RMS$_NORMAL) | |
212 { | |
213 error ("RMS write to map file failed"); | |
214 return 0; | |
215 } | |
216 data = &data[MAXWRITE]; | |
217 length -= MAXWRITE; | |
218 rab->rab$l_bkt = 0; | |
219 } | |
220 return 1; | |
221 } /* write_data */ | |
222 | |
223 #endif /* VMS */ | |
224 |