Mercurial > emacs
annotate man/tramp.texi @ 46516:25e7debccc64
(choose-completion-delete-max-match): Handle minibuffer prompts explicitly.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Thu, 18 Jul 2002 14:57:46 +0000 |
parents | 93ea423da06e |
children | f548d7d0c651 |
rev | line source |
---|---|
45861 | 1 \input texinfo @c -*-texinfo-*- |
2 @c %**start of header | |
45864 | 3 @setfilename ../info/tramp |
45861 | 4 @settitle TRAMP User Manual |
5 @setchapternewpage odd | |
6 @c %**end of header | |
7 | |
8 @c This is *so* much nicer :) | |
9 @footnotestyle end | |
10 | |
11 | |
12 @c Entries for @command{install-info} to use | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
13 @dircategory Emacs |
45861 | 14 @direntry |
15 * TRAMP: (tramp). Transparent Remote Access, Multiple Protocol | |
16 Emacs remote file access via rsh and rcp. | |
17 @end direntry | |
18 | |
19 @c Macro to make formatting of the tramp program name consistent. | |
20 @macro tramp | |
21 @sc{tramp} | |
22 @end macro | |
23 | |
24 @c Copying permissions, et al | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
25 @copying |
45861 | 26 This file documents @tramp{}, a remote file editing package for Emacs and |
27 XEmacs. | |
28 | |
46348 | 29 Copyright @copyright{} 1999, 2000, 2001, 2002 Free Software |
30 Foundation, Inc. | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
31 |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
32 @quotation |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
33 Permission is granted to copy, distribute and/or modify this document |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
34 under the terms of the GNU Free Documentation License, Version 1.1 or |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
35 any later version published by the Free Software Foundation; with no |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
36 Invariant Sections, with the Front-Cover texts being ``A GNU |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
37 Manual'', and with the Back-Cover Texts as in (a) below. A copy of the |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
38 license is included in the section entitled ``GNU Free Documentation |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
39 License'' in the Emacs manual. |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
40 |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
41 (a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
42 this GNU Manual, like GNU software. Copies published by the Free |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
43 Software Foundation raise funds for GNU development.'' |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
44 |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
45 This document is part of a collection distributed under the GNU Free |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
46 Documentation License. If you want to distribute this document |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
47 separately from the collection, you can do so by adding a copy of the |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
48 license to the document, as described in section 6 of the license. |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
49 @end quotation |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
50 @end copying |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
51 |
45861 | 52 |
53 @tex | |
54 | |
55 @titlepage | |
56 @title @tramp{} User Manual | |
57 | |
58 @author by Daniel Pittman | |
59 @author based on documentation by Kai Gro@ss{}johann | |
60 @page | |
61 | |
62 @end titlepage | |
63 @page | |
64 | |
65 @end tex | |
66 | |
67 @ifnottex | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
68 @node Top, Overview, (dir), (dir) |
45861 | 69 @top @tramp{} User Manual |
70 | |
71 @tramp{} stands for `Transparent Remote (file) Access, Multiple | |
72 Protocol'. This package provides remote file editing, similar to | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
73 @cite{Ange-FTP} and @cite{EFS}. |
45861 | 74 |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
75 The difference is that Ange-FTP uses FTP to transfer files between the |
45861 | 76 local and the remote host, whereas @tramp{} uses a combination of |
77 @command{rsh} and @command{rcp} or other work-alike programs, such as | |
78 @command{ssh}/@command{scp}. | |
79 | |
80 You can find the latest version of this document on the web at | |
81 @uref{http://www.freesoftware.fsf.org/tramp/}. | |
82 | |
83 @ifhtml | |
84 This manual is also available as a @uref{tramp_ja.html, Japanese | |
85 translation}. | |
86 | |
87 The latest release of @tramp{} is available for | |
88 @uref{http://savannah.gnu.org/download/tramp/, | |
89 download}, or you may see @ref{Obtaining @tramp{}} for more details, | |
90 including the CVS server details. | |
91 | |
92 @tramp{} also has a @uref{https://savannah.gnu.org/projects/tramp/, | |
93 Savannah Project Page}. | |
94 @end ifhtml | |
95 | |
96 There is a mailing list for @tramp{}, available at | |
97 @email{tramp-devel@@mail.freesoftware.fsf.org}, and archived at | |
98 @uref{http://www.mail-archive.com/emacs-rcp@@ls6.cs.uni-dortmund.de/} as | |
99 well as the usual Savannah archives. | |
100 | |
101 @end ifnottex | |
102 | |
103 @menu | |
104 * Overview:: What @tramp{} can and cannot do. | |
105 | |
106 For the end user: | |
107 * Obtaining @tramp{}:: How to obtain @tramp{}. | |
108 * History:: History of @tramp{} | |
109 * Installation:: Installing @tramp{} with your (X)Emacs. | |
110 * Configuration:: Configuring @tramp{} for use. | |
111 * Usage:: An overview of the operation of @tramp{}. | |
112 * Bug Reports:: Reporting Bugs and Problems | |
113 * Frequently Asked Questions:: Questions and answers from the mailing list. | |
114 | |
115 For the developer: | |
116 * Version Control:: The inner workings of remote version control. | |
117 * Files directories and paths:: How file names, directories and paths are mangled and managed. | |
118 * Issues:: | |
119 | |
120 @detailmenu | |
121 --- The Detailed Node Listing --- | |
122 | |
123 Configuring @tramp{} for use | |
124 | |
125 * Connection types:: Types of connections made to remote machines. | |
126 * Inline methods:: Inline methods. | |
127 * External transfer methods:: External transfer methods. | |
128 * Multi-hop Methods:: Connecting to a remote host using multiple hops. | |
129 * Default Method:: Selecting a default method. | |
130 * Customizing Methods:: Using Non-Standard Methods. | |
131 * Remote Programs:: How @tramp{} finds and uses programs on the remote machine. | |
132 * Remote shell setup:: | |
133 | |
134 Using @tramp | |
135 | |
136 * Filename Syntax:: @tramp{} filename conventions. | |
137 * Multi-hop filename syntax:: Multi-hop filename conventions | |
138 * Dired:: Dired and filename completion. | |
139 | |
140 The inner workings of remote version control | |
141 | |
142 * Version Controlled Files:: Determining if a file is under version control. | |
143 * Remote Commands:: Executing the version control commands on the remote machine. | |
144 * Changed workfiles:: Detecting if the working file has changed. | |
145 * Checking out files:: Bringing the workfile out of the repository. | |
146 * Miscellaneous Version Control:: Things related to Version Control that don't fit elsewhere | |
147 | |
148 Things related to Version Control that don't fit elsewhere | |
149 | |
150 * Remote File Ownership:: How VC determines who owns a workfile. | |
151 * Back-end Versions:: How VC determines what release your RCS is. | |
152 | |
153 How file names, directories and paths are mangled and managed. | |
154 | |
155 * Path deconstruction:: Breaking a path into its components. | |
156 | |
157 @end detailmenu | |
158 @end menu | |
159 | |
160 | |
161 @node Overview | |
162 @chapter An overview of @tramp | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
163 @cindex overview |
45861 | 164 |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
165 After the installation of @tramp{} into your Emacs, you will be able |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
166 to access files on remote machines as though they were local. Access |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
167 to the remote file system for editing files, version control, and |
45861 | 168 @command{dired} are transparently enabled. |
169 | |
170 Your access to the remote machine can be with the @command{rsh}, | |
171 @command{rlogin}, @command{telnet} programs or with any similar | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
172 connection method. This connection must pass ASCII successfully to be |
45861 | 173 usable but need not be 8-bit clean. |
174 | |
175 The package provides support for @command{ssh} connections out of the | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
176 box, one of the more common uses of the package. This allows |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
177 relatively secure access to machines, especially if @command{ftp} |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
178 access is disabled. |
45861 | 179 |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
180 The majority of activity carried out by @tramp{} requires only that |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
181 the remote login is possible and is carried out at the terminal. In |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
182 order to access remote files @tramp{} needs to transfer their content |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
183 to the local machine temporarily. |
45861 | 184 |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
185 @tramp{} can transfer files between the machines in a variety of ways. |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
186 The details are easy to select, depending on your needs and the |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
187 machines in question. |
45861 | 188 |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
189 The fastest transfer methods (for large files) rely on a remote file |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
190 transfer package such as @command{rcp}, @command{scp} or |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
191 @command{rsync}. The use of these methods is only possible if the |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
192 file copy command does not ask for a password for the remote machine. |
45861 | 193 |
194 If the remote copy methods are not suitable for you, @tramp{} also | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
195 supports the use of encoded transfers directly through the shell. |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
196 This requires that the @command{mimencode} or @command{uuencode} tools |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
197 are available on the remote machine. These methods are generally |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
198 faster for small files. |
45861 | 199 |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
200 Within these limitations, @tramp{} is quite powerful. It is worth |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
201 noting that, as of the time of writing, it is far from a polished |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
202 end-user product. For a while yet you should expect to run into rough |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
203 edges and problems with the code now and then. |
45861 | 204 |
205 It is finished enough that the developers use it for day to day work but | |
206 the installation and setup can be a little difficult to master, as can | |
207 the terminology. | |
208 | |
209 @tramp{} is still under active development and any problems you encounter, | |
210 trivial or major, should be reported to the @tramp{} developers. | |
211 @xref{Bug Reports}. | |
212 | |
213 | |
214 @subsubheading Behind the scenes | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
215 @cindex behind the scenes |
46366 | 216 @cindex details of operation |
217 @cindex how it works | |
45861 | 218 |
219 This section tries to explain what goes on behind the scenes when you | |
220 access a remote file through @tramp{}. | |
221 | |
222 Suppose you type @kbd{C-x C-f} and enter part of an @tramp{} file name, | |
223 then hit @kbd{@key{TAB}} for completion. Suppose further that this is | |
224 the first time that @tramp{} is invoked for the host in question. Here's | |
225 what happens: | |
226 | |
227 @itemize | |
228 @item | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
229 @tramp{} discovers that it needs a connection to the host. So it |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
230 invokes @samp{telnet @var{host}} or @samp{rsh @var{host} -l |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
231 @var{user}} or a similar tool to connect to the remote host. |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
232 Communication with this process happens through an Emacs buffer, that |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
233 is, the output from the remote end goes into a buffer. |
45861 | 234 |
235 @item | |
236 The remote host may prompt for a login name (for @command{telnet}). The | |
237 login name is given in the file name, so @tramp{} sends the login name and | |
238 a newline. | |
239 | |
240 @item | |
241 The remote host may prompt for a password or pass phrase (for | |
242 @command{rsh} or for @command{telnet} after sending the login name). | |
243 @tramp{} displays the prompt in the minibuffer, asking you for the | |
244 password or pass phrase. | |
245 | |
246 You enter the password or pass phrase. @tramp{} sends it to the remote | |
247 host, followed by a newline. | |
248 | |
249 @item | |
250 @tramp{} now waits for the shell prompt or for a message that the login | |
251 failed. | |
252 | |
253 If @tramp{} sees neither of them after a certain period of time (a minute, | |
254 say), then it issues an error message saying that it couldn't find the | |
255 remote shell prompt and shows you what the remote host has sent. | |
256 | |
257 If @tramp{} sees a `login failed' message, it tells you so, aborts the | |
258 login attempt and allows you to try again. | |
259 | |
260 @item | |
261 Suppose that the login was successful and @tramp{} sees the shell prompt | |
262 from the remote host. Now @tramp{} invokes @command{/bin/sh} because | |
263 Bourne shells and C shells have different command | |
264 syntaxes.@footnote{Invoking @command{/bin/sh} will fail if your login | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
265 shell doesn't recognize @samp{exec /bin/sh} as a valid command. |
45861 | 266 Maybe you use the Scheme shell @command{scsh}@dots{}} |
267 | |
268 After the Bourne shell has come up, @tramp{} sends a few commands to | |
269 ensure a good working environment. It turns off echoing, it sets the | |
270 shell prompt, and a few other things. | |
271 | |
272 @item | |
273 Now the remote shell is up and it good working order. Remember, what | |
274 was supposed to happen is that @tramp{} tries to find out what files exist | |
275 on the remote host so that it can do filename completion. | |
276 | |
277 So, @tramp{} basically issues @command{cd} and @command{ls} commands and | |
278 also sometimes @command{echo} with globbing. Another command that is | |
279 often used is @command{test} to find out whether a file is writable or a | |
280 directory or the like. The output of each command is parsed for the | |
281 necessary operation. | |
282 | |
283 @item | |
284 Suppose you are finished with filename completion, have entered @kbd{C-x | |
285 C-f}, a full file name and hit @kbd{@key{RET}}. Now comes the time to | |
286 transfer the file contents from the remote host to the local host so | |
287 that you can edit them. | |
288 | |
289 See above for an explanation of how @tramp{} transfers the file contents. | |
290 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
291 For inline transfers, @tramp{} issues a command like @samp{mimencode -b |
45861 | 292 /path/to/remote/file}, waits until the output has accumulated in the |
293 buffer that's used for communication, then decodes that output to | |
294 produce the file contents. | |
295 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
296 For out-of-band transfers, @tramp{} issues a command like @samp{rcp |
45861 | 297 user@@host:/path/to/remote/file /tmp/tramp.4711} and then reads the local |
298 temporary file @file{/tmp/tramp.4711} into a buffer and deletes the | |
299 temporary file. | |
300 | |
301 @item | |
302 You now edit the buffer contents, blithely unaware of what has happened | |
303 behind the scenes. (Unless you have read this section, that is.) When | |
304 you are finished, you type @kbd{C-x C-s} to save the buffer. | |
305 | |
306 @item | |
307 Again, @tramp{} transfers the file contents to the remote host either | |
308 inline or out-of-band. This is the reverse of what happens when reading | |
309 the file. | |
310 | |
311 @end itemize | |
312 | |
313 I hope this has provided you with a basic overview of what happens | |
314 behind the scenes when you open a file with @tramp{}. | |
315 | |
316 | |
317 @c For the end user | |
318 @node Obtaining @tramp{} | |
319 @chapter Obtaining @tramp{}. | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
320 @cindex obtaining Tramp |
45861 | 321 |
322 @tramp{} is freely available on the Internet and the latest release may be | |
323 downloaded from | |
324 @uref{ftp://ls6-ftp.cs.uni-dortmund.de/pub/src/emacs/tramp.tar.gz}. This | |
325 release includes the full documentation and code for @tramp{}, suitable | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
326 for installation. But Emacs (21.4 or later) includes @tramp{} |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
327 already, and there is a @tramp{} package for XEmacs, as well. So |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
328 maybe it is easier to just use those. But if you want the bleeding |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
329 edge, read on@dots{...} |
45861 | 330 |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
331 For the especially brave, @tramp{} is available from CVS. The CVS version |
45861 | 332 is the latest version of the code and may contain incomplete features or |
333 new issues. Use these versions at your own risk. | |
334 | |
335 Instructions for obtaining the latest development version of @tramp{} | |
336 from CVS can be found by going to the Savannah project page at | |
337 @uref{http://savannah.gnu.org/projects/tramp/} and then clicking on the | |
338 CVS link in the navigation bar at the top. Or follow the example | |
339 session below: | |
340 | |
341 @example | |
342 ] @strong{cd ~/lisp} | |
343 ] @strong{cvs -d:pserver:anoncvs@@subversions.gnu.org:/cvsroot/tramp login} | |
344 | |
345 (Logging in to anoncvs@@subversions.gnu.org) | |
346 CVS password: @strong{(just hit RET here)} | |
347 @dots{} | |
348 | |
349 ] @strong{cvs -z3 -d:pserver:anoncvs@@subversions.gnu.org:/cvsroot/tramp co tramp} | |
350 @end example | |
351 | |
352 You should now have a directory @file{~/lisp/tramp} containing the latest | |
353 version of @tramp{}. You can fetch the latest updates from the repository | |
354 by issuing the command: | |
355 | |
356 @example | |
357 ] @strong{cd ~/lisp/tramp} | |
358 ] @strong{cvs update -d} | |
359 @end example | |
360 | |
361 | |
362 @node History | |
363 @chapter History of @tramp{} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
364 @cindex history |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
365 @cindex development history |
45861 | 366 |
367 Development was started end of November 1998. The package was called | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
368 @file{rssh.el}, back then. It only provided one method to access a |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
369 file, using @command{ssh} to log in to a remote host and using |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
370 @command{scp} to transfer the file contents. After a while, the name |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
371 was changed to @file{rcp.el}, and now it's @tramp{}. Along the way, |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
372 many more methods for getting a remote shell and for transferring the |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
373 file contents were added. Support for VC was added. |
45861 | 374 |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
375 The most recent addition of major features were the multi-hop methods |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
376 added in April 2000 and the unification of @tramp{} and Ange-FTP |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
377 filenames in July 2002. |
45861 | 378 |
379 | |
380 @node Installation | |
381 @chapter Installing @tramp{} into Emacs or XEmacs | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
382 @cindex installation |
45861 | 383 |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
384 If you use the version that comes with your Emacs or the XEmacs |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
385 package, the following information is not necessary. Installing |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
386 @tramp{} into your Emacs or XEmacs is a relatively easy process, at |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
387 least compared to rebuilding your machine from scratch. ;) |
45861 | 388 |
389 Seriously though, the installation should be a fairly simple matter. | |
390 | |
391 The easiest way to proceed is as follows: | |
392 | |
393 @itemize | |
394 @item | |
395 Choose a directory, say @file{~/emacs/}. Change into that directory and | |
396 unpack the tarball. This will give you a directory | |
397 @file{~/emacs/tramp/} which contains subdirectories @file{lisp} for the | |
398 Lisp code and @file{texi} for the documentation. | |
399 | |
400 @item | |
401 Optionally byte-compile all files in the Lisp directory, | |
402 @file{~/emacs/tramp/lisp/}, by issuing a command like the following from | |
403 the top level directory @file{~/emacs/tramp/}: | |
404 @example | |
405 make EMACS=emacs all # for Emacs users | |
406 make EMACS=xemacs all # for XEmacs users | |
407 @end example | |
408 | |
409 @item | |
410 NOTE: | |
411 @example | |
412 If you run into problems running the example @command{make} | |
413 commands, don't dispare. You can still byte compile the | |
414 @file{*.el} files by opening emacs in @command{dired} | |
415 (@command{C-x d}) mode, at @file{~/tramp/lisp}. Mark the lisp | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
416 files with @kbd{m}, then press @kbd{B} to byte compile |
45861 | 417 your selections. |
418 | |
419 Something similar can be done to create the info manual. | |
420 Just cd to @file{~/emacs/tramp/texi} and load the @file{tramp.texi} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
421 file in emacs. Then press @kbd{M-x makeinfo-buffer <RET>} |
45861 | 422 to generate @file{tramp.info}. |
423 @end example | |
424 | |
425 @item | |
426 Tell Emacs about the new Lisp directory and the @tramp{} package | |
427 with the following lines in @file{~/.emacs}: | |
428 @lisp | |
429 (add-to-list 'load-path "~/emacs/tramp/lisp/") | |
430 (require 'tramp) | |
431 @end lisp | |
432 | |
433 @item | |
434 To be able to read the Info documentation, create a file | |
435 @file{~/emacs/tramp/texi/dir} using for example the | |
436 @command{install-info} command, and add the directory to the search | |
437 path for Info. | |
438 | |
439 @item | |
440 NOTE: | |
441 @example | |
442 On systems using `gnu' @command{install-info}, the | |
443 @command{install-info} syntax is very direct and simple. One can | |
444 cd to @file{~/emacs/tramp/texi} and type: | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
445 @kbd{install-info tramp.info dir} |
45861 | 446 and a @file{dir} file will be created with the @tramp{} |
447 entry. The info reader will know how to interpret it, but must | |
448 be told where to find it (see below). If you want anything fancier | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
449 you'll need to look through @kbd{man install-info}. |
45861 | 450 |
451 Debian gnu/linux doesn't default to `gnu' @command{install-info} and | |
452 uses its own version. This version does not create a @file{dir} file | |
453 for you from scratch. You must provide a skeleton dir file it | |
454 recognizes. One can be found in a default install at | |
455 @file{/usr/info/dir}. Copy the top of this file down to the first | |
456 occurrence of `* Menu' including that line plus one more blank line, | |
457 to your working directory @file{texi/dir}, or use the sample provided | |
458 in the @file{texi} directroy of this distribution. See | |
459 @file{texi/dir_sample} | |
460 | |
461 Once a @file{dir} file is in place, this command will make the entry. | |
462 install-info --infodir=. tramp.info | |
463 If you want it in a specific category | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
464 (see @kbd{man install-info} for further details) |
45861 | 465 @end example |
466 | |
467 If the environment variable @env{INFOPATH} is set, add the directory | |
468 @file{~/emacs/tramp/texi/} to it. Else, add the directory to | |
469 @code{Info-default-directory-list}, as follows: | |
470 @lisp | |
471 (add-to-list 'Info-default-directory-list "~/emacs/tramp/texi/") | |
472 @end lisp | |
473 XEmacs 21 users should use @code{Info-directory-list} rather than | |
474 @code{Info-default-directory-list}. | |
475 | |
476 @end itemize | |
477 | |
478 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
479 For XEmacs users, the package @file{fsf-compat} must be installed. |
45861 | 480 For details on package installation, see @ref{Packages, , ,xemacs}. |
481 @ifhtml | |
482 (If the previous link doesn't work, try the XEmacs documentation at | |
483 @uref{http://www.xemacs.org/Documentation/packageGuide.html,the XEmacs | |
484 site}.) | |
485 @end ifhtml | |
486 | |
487 @node Configuration | |
488 @chapter Configuring @tramp{} for use | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
489 @cindex configuration |
45861 | 490 |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
491 @cindex default configuration |
45861 | 492 @tramp{} is (normally) fully functional when it is initially |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
493 installed. It is initially configured to use the @command{sh} program |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
494 to connect to the remote host and to use base-64 encoding (on the |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
495 remote host, via @command{mimencode}, and on the local host via the |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
496 built-in support for base-64 encoding in Emacs). |
45861 | 497 |
498 On some hosts, there are problems with opening a connection. These are | |
499 related to the behavior of the remote shell. See @xref{Remote shell | |
500 setup}, for details on this. | |
501 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
502 If you do not wish to use these commands to connect to the remote |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
503 host, you should change the default connection and transfer method |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
504 that @tramp uses. There are several different methods that @tramp{} |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
505 can use to connect to remote machines and transfer files |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
506 (@pxref{Connection types}). |
45861 | 507 |
508 | |
509 @menu | |
510 * Connection types:: Types of connections made to remote machines. | |
511 * Inline methods:: Inline methods. | |
512 * External transfer methods:: External transfer methods. | |
513 * Multi-hop Methods:: Connecting to a remote host using multiple hops. | |
514 * Default Method:: Selecting a default method. | |
515 * Customizing Methods:: Using Non-Standard Methods. | |
516 * Remote Programs:: How @tramp{} finds and uses programs on the remote machine. | |
517 * Remote shell setup:: Remote shell setup hints. | |
518 * Windows setup hints:: Issues with Cygwin ssh. | |
519 @end menu | |
520 | |
521 | |
522 @node Connection types | |
523 @section Types of connections made to remote machines. | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
524 @cindex connection types, overview |
45861 | 525 |
526 There are two basic types of transfer methods, each with its own | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
527 advantages and limitations. Both types of connection make use of a |
45861 | 528 remote shell access program such as @command{rsh}, @command{ssh} or |
529 @command{telnet} to connect to the remote machine. | |
530 | |
531 This connection is used to perform many of the operations that @tramp | |
532 requires to make the remote file system transparently accessible from | |
533 the local machine. It is only when visiting files that the methods | |
534 differ. | |
535 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
536 @cindex inline methods |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
537 @cindex external transfer methods |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
538 @cindex external methods |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
539 @cindex out-of-band methods |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
540 @cindex methods, inline |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
541 @cindex methods, external transfer |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
542 @cindex methods, out-of-band |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
543 Loading or saving a remote file requires that the content of the file |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
544 be transfered between the two machines. The content of the file can be |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
545 transfered over the same connection used to log in to the remote |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
546 machine or the file can be transfered through another connection using |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
547 a remote copy program such as @command{rcp}, @command{scp} or |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
548 @command{rsync}. The former are called @dfn{inline methods}, the |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
549 latter are called @dfn{out-of-band methods} or @dfn{external transfer |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
550 methods} (@dfn{external methods} for short). |
45861 | 551 |
552 The performance of the external transfer methods is generally better | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
553 than that of the inline methods, at least for large files. This is |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
554 caused by the need to encode and decode the data when transferring |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
555 inline. |
45861 | 556 |
557 The one exception to this rule are the @command{scp} based transfer | |
558 methods. While these methods do see better performance when actually | |
559 transferring files, the overhead of the cryptographic negotiation at | |
560 startup may drown out the improvement in file transfer times. | |
561 | |
562 External transfer methods do require that the remote copy command is not | |
563 interactive --- that is, the command does not prompt you for a password. | |
564 If you cannot perform remote copies without a password, you will need to | |
565 use an inline transfer method to work with @tramp{}. | |
566 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
567 @cindex multi-hop methods |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
568 @cindex methods, multi-hop |
45861 | 569 A variant of the inline methods are the @dfn{multi-hop methods}. |
570 These methods allow you to connect a remote host using a number `hops', | |
571 each of which connects to a different host. This is useful if you are | |
572 in a secured network where you need to go through a bastion host to | |
573 connect to the outside world. | |
574 | |
575 | |
576 @node Inline methods | |
577 @section Inline methods | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
578 @cindex inline methods |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
579 @cindex methods, inline |
45861 | 580 |
581 The inline methods in @tramp{} are quite powerful and can work in | |
582 situations where you cannot use an external transfer program to connect. | |
583 Inline methods are the only methods that work when connecting to the | |
584 remote machine via telnet. (There are also strange inline methods which | |
585 allow you to transfer files between @emph{user identities} rather than | |
586 hosts, see below.) | |
587 | |
588 These methods depend on the existence of a suitable encoding and | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
589 decoding command on remote machine. Locally, @tramp{} may be able to use |
45861 | 590 features of Emacs to decode and encode the files or it may require |
591 access to external commands to perform that task. | |
592 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
593 @cindex uuencode |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
594 @tramp{} supports the use of @command{uuencode} to transfer files. |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
595 This is @emph{not} recommended. The @command{uuencode} and |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
596 @command{uudecode} commands are not well standardized and may not |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
597 function correctly or at all on some machines, notably AIX and IRIX. |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
598 These systems do not work with @command{uuencode} at all. (But do see |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
599 the note about AIX in the documentation for @var{tramp-methods}.) |
45861 | 600 |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
601 @cindex mimencode |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
602 @cindex base-64 encoding |
45861 | 603 In summary, if possible use the @command{mimencode} methods to transfer |
604 the data base64 encoded. This has the advantage of using a built-in | |
605 command in every modern Emacs, improving performance. | |
606 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
607 @table @asis |
45861 | 608 @item @option{rm} --- @command{rsh} with @command{mimencode} |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
609 @cindex method rm |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
610 @cindex rm method |
46366 | 611 @cindex method using rsh (rm) |
45861 | 612 |
613 Connect to the remote host with @command{rsh} and use base64 encoding to | |
614 transfer files between the machines. | |
615 | |
616 This requires the @command{mimencode} command that is part of the | |
617 @command{metamail} packages. This may not be installed on all remote | |
618 machines. | |
619 | |
620 | |
621 @item @option{sm} --- @command{ssh} with @command{mimencode} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
622 @cindex method sm |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
623 @cindex sm method |
46366 | 624 @cindex method using ssh (sm) |
625 @cindex ssh (with sm method) | |
626 @cindex mimencode (with sm method) | |
627 @cindex base-64 encoding (with sm method) | |
45861 | 628 |
629 Connect to the remote host with @command{ssh} and use base64 encoding to | |
630 transfer files between the machines. | |
631 | |
632 This is identical to the previous option except that the @command{ssh} | |
633 package is used, making the connection more secure. | |
634 | |
635 There are also two variants, @option{sm1} and @option{sm2} that use the | |
636 @command{ssh1} and @command{ssh2} commands explicitly. If you don't know | |
637 what these are, you do not need these options. | |
638 | |
46010
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
639 All the methods based on @command{ssh} have an additional kludgy |
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
640 feature: you can specify a host name which looks like @file{host#42} |
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
641 (the real host name, then a hash sign, then a port number). This |
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
642 means to connect to the given host but to also pass @code{-p 42} as |
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
643 arguments to the @command{ssh} command. |
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
644 |
45861 | 645 |
646 @item @option{tm} --- @command{telnet} with @command{mimencode} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
647 @cindex method tm |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
648 @cindex tm method |
46366 | 649 @cindex method using telnet (tm) |
650 @cindex telnet (with tm method) | |
651 @cindex mimencode (with tm method) | |
652 @cindex base-64 encoding (with tm method) | |
45861 | 653 |
654 Connect to the remote host with @command{telnet} and use base64 encoding | |
655 to transfer files between the machines. | |
656 | |
657 This requires the @command{mimencode} command that is part of the | |
658 @command{metamail} packages. | |
659 | |
660 | |
661 @item @option{ru} --- @command{rsh} with @command{uuencode} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
662 @cindex method ru |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
663 @cindex ru method |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
664 @cindex method using rsh |
46366 | 665 @cindex rsh (with ru method) |
666 @cindex uuencode (with ru method) | |
45861 | 667 |
668 Connect to the remote host with @command{rsh} and use the | |
669 @command{uuencode} and @command{uudecode} commands to transfer files | |
670 between the machines. | |
671 | |
672 | |
673 @item @option{su} --- @command{ssh} with @command{uuencode} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
674 @cindex method su |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
675 @cindex su method |
46366 | 676 @cindex method using ssh (su) |
677 @cindex ssh (with su method) | |
678 @cindex uuencode (with su method) | |
45861 | 679 |
680 Connect to the remote host with @command{ssh} and use the | |
681 @command{uuencode} and @command{uudecode} commands to transfer files | |
682 between the machines. | |
683 | |
46010
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
684 As with the @command{ssh} and base64 option (@option{sm}) above, this |
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
685 provides the @option{su1} and @option{su2} methods to explicitly |
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
686 select an ssh version. |
45861 | 687 |
688 Note that this method does not invoke the @command{su} program, see | |
689 below for methods which use that. | |
690 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
691 This supports the @samp{-p} kludge. |
46010
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
692 |
45861 | 693 |
694 @item @option{tu} --- @command{telnet} with @command{uuencode} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
695 @cindex tu method |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
696 @cindex method tu |
46366 | 697 @cindex method using telnet (tu) |
698 @cindex telnet (with tu method) | |
699 @cindex uuencode (with tu method) | |
45861 | 700 |
701 Connect to the remote host with @command{telnet} and use the | |
702 @command{uuencode} and @command{uudecode} commands to transfer files | |
703 between the machines. | |
704 | |
705 | |
706 @item @option{sum} --- @command{su} with @command{mimencode} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
707 @cindex method sum |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
708 @cindex sum method |
46366 | 709 @cindex method using su (sum) |
710 @cindex su (with sum method) | |
711 @cindex mimencode (with sum method) | |
712 @cindex base-64 encoding (with sum method) | |
45861 | 713 |
714 This method does not connect to a remote host at all, rather it uses the | |
715 @command{su} program to allow you to edit files as another user. Uses | |
716 base64 encoding to transfer the file contents. | |
717 | |
718 | |
719 @item @option{suu} --- @command{su} with @command{uuencode} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
720 @cindex method suu |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
721 @cindex suu method |
46366 | 722 @cindex method using su (suu) |
723 @cindex su (with suu method) | |
724 @cindex uuencode (with suu method) | |
45861 | 725 |
726 Like @option{sum}, this uses the @command{su} program to allow you to | |
727 edit files on the local host as another user. Uses @command{uuencode} | |
728 and @command{uudecode} to transfer the file contents. | |
729 | |
730 | |
731 @item @option{sudm} --- @command{sudo} with @command{mimencode} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
732 @cindex method sudm |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
733 @cindex sudm method |
46366 | 734 @cindex method using sudo (sudm) |
735 @cindex sudo (with sudm method) | |
736 @cindex mimencode (with sudm method) | |
737 @cindex base-64 encoding (with sudm method) | |
45861 | 738 |
739 This is similar to the @option{sum} method, but it uses @command{sudo} | |
740 rather than @command{su} to become a different user. | |
741 | |
742 Note that @command{sudo} must be configured to allow you to start a | |
743 shell as the user. It would be nice if it was sufficient if | |
744 @command{ls} and @command{mimencode} were allowed, but that is not easy | |
745 to implement, so I haven't got around to it, yet. | |
746 | |
747 | |
748 @item @option{sudu} --- @command{sudo} with @command{uuencode} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
749 @cindex method sudu |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
750 @cindex sudu method |
46366 | 751 @cindex method using sudo (sudu) |
752 @cindex sudo (with sudu method) | |
753 @cindex uuencode (with sudu method) | |
45861 | 754 |
755 This is similar to the @option{suu} method, but it uses @command{sudo} | |
756 rather than @command{su} to become a different user. | |
757 | |
758 | |
759 @item @option{smx} --- @command{ssh} with @command{mimencode} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
760 @cindex method smx |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
761 @cindex smx method |
46366 | 762 @cindex method using ssh (smx) |
763 @cindex ssh (with smx method) | |
764 @cindex mimencode (with smx method) | |
765 @cindex base-64 encoding (with smx method) | |
766 @cindex Cygwin (with smx method) | |
45861 | 767 |
768 As you expect, this is similar to @option{sm}, only a little | |
769 different. Whereas @option{sm} opens a normal interactive shell on | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
770 the remote host, this option uses @samp{ssh -t -t @var{host} -l |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
771 @var{user} /bin/sh} tp open a connection. This is useful for users |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
772 where the normal login shell is set up to ask them a number of |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
773 questions when logging in. This procedure avoids these questions, and |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
774 just gives @tramp{} a more-or-less `standard' login shell to work |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
775 with. |
45861 | 776 |
46346
49f06e689a20
* files.texi (Remote Files): Explain new unified file name synatx.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46010
diff
changeset
|
777 Note that this procedure does not eliminate questions asked by |
49f06e689a20
* files.texi (Remote Files): Explain new unified file name synatx.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46010
diff
changeset
|
778 @command{ssh} itself. For example, @command{ssh} might ask ``Are you |
49f06e689a20
* files.texi (Remote Files): Explain new unified file name synatx.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46010
diff
changeset
|
779 sure you want to continue connecting?'' if the host key of the remote |
49f06e689a20
* files.texi (Remote Files): Explain new unified file name synatx.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46010
diff
changeset
|
780 host is not known. Tramp does not know how to deal with such a |
49f06e689a20
* files.texi (Remote Files): Explain new unified file name synatx.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46010
diff
changeset
|
781 question (yet), therefore you will need to make sure that you can log |
49f06e689a20
* files.texi (Remote Files): Explain new unified file name synatx.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46010
diff
changeset
|
782 in without such questions. |
49f06e689a20
* files.texi (Remote Files): Explain new unified file name synatx.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46010
diff
changeset
|
783 |
45861 | 784 This is also useful for Windows users where @command{ssh}, when |
785 invoked from an Emacs buffer, tells them that it is not allocating a | |
786 pseudo tty. When this happens, the login shell is wont to not print | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
787 any shell prompt, which confuses @tramp{} mightily. For reasons |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
788 unknown, some Windows ports for @command{ssh} (maybe the Cygwin one) |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
789 require the doubled @samp{-t} option. |
45861 | 790 |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
791 This supports the @samp{-p} kludge. |
46010
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
792 |
45861 | 793 |
794 @item @option{km} --- @command{krlogin} with @command{mimencode} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
795 @cindex method km |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
796 @cindex km method |
46366 | 797 @cindex krlogin (with km method) |
798 @cindex Kerberos (with km method) | |
799 @cindex mimencode (with km method) | |
800 @cindex base-64 encoding (with km method) | |
45861 | 801 |
802 This method is also similar to @option{sm}. It only uses the | |
803 @command{krlogin -x} command to log in to the remote host. | |
804 | |
805 | |
806 @item @option{plinku} --- @command{plink} with @command{uuencode} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
807 @cindex method plinku |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
808 @cindex plinku method |
46366 | 809 @cindex method using plink (plinku) |
810 @cindex plink (with plinku method) | |
811 @cindex uuencode (with plinku method) | |
45861 | 812 |
813 This method is mostly interesting for Windows users using the PuTTY | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
814 implementation of SSH. It uses @samp{plink -ssh} to log in to the |
45861 | 815 remote host. |
816 | |
817 CCC: Do we have to connect to the remote host once from the command | |
818 line to accept the SSH key? Maybe this can be made automatic? | |
819 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
820 CCC: Does @command{plink} support the @samp{-p} option? Tramp |
46010
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
821 will support that, anyway. |
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
822 |
45861 | 823 @item @option{plinkm} --- @command{plink} with @command{mimencode} |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
824 @cindex method plinkm |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
825 @cindex plinkm method |
46366 | 826 @cindex method using plink (plinkm) |
827 @cindex plink (with plinkm method) | |
828 @cindex mimencode (with plinkm method) | |
829 @cindex base-64 encoding (with plinkm method) | |
45861 | 830 |
831 Like @option{plinku}, but uses base64 encoding instead of uu encoding. | |
832 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
833 @end table |
45861 | 834 |
835 | |
836 | |
837 @node External transfer methods | |
838 @section External transfer methods | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
839 @cindex methods, external transfer |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
840 @cindex methods, out-of-band |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
841 @cindex external transfer methods |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
842 @cindex out-of-band methods |
45861 | 843 |
844 The external transfer methods operate through multiple channels, using | |
845 the remote shell connection for many actions while delegating file | |
846 transfers to an external transfer utility. | |
847 | |
848 This saves the overhead of encoding and decoding that multiplexing the | |
849 transfer through the one connection has with the inline methods. | |
850 | |
851 If you want to use an external transfer method you @emph{must} be able | |
852 to execute the transfer utility to copy files to and from the remote | |
853 machine without any interaction. | |
854 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
855 @cindex ssh-agent |
45861 | 856 This means that you will need to use @command{ssh-agent} if you use the |
857 @command{scp} program for transfers, or maybe your version of | |
858 @command{scp} accepts a password on the command line.@footnote{PuTTY's | |
859 @command{pscp} allows you to specify the password on the command line.} | |
860 If you use @command{rsync} via @command{ssh} then the same rule must | |
861 apply to that connection. | |
862 | |
863 If you cannot get @command{scp} to run without asking for a password but | |
864 would still like to use @command{ssh} to secure your connection, have a | |
865 look at the @command{ssh} based inline methods. | |
866 | |
867 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
868 @table @asis |
45861 | 869 @item @option{rcp} --- @command{rsh} and @command{rcp} |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
870 @cindex method rcp |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
871 @cindex rcp method |
46366 | 872 @cindex rcp (with rcp method) |
873 @cindex rsh (with rcp method) | |
45861 | 874 |
875 This method uses the @command{rsh} and @command{rcp} commands to connect | |
876 to the remote machine and transfer files. This is probably the fastest | |
877 connection method available. | |
878 | |
879 | |
880 @item @option{scp} --- @command{ssh} and @command{scp} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
881 @cindex method scp |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
882 @cindex scp method |
46366 | 883 @cindex scp (with scp method) |
884 @cindex ssh (with scp method) | |
45861 | 885 |
886 Using @command{ssh} to connect to the remote host and @command{scp} to | |
887 transfer files between the machines is the best method for securely | |
888 connecting to a remote machine and accessing files. | |
889 | |
890 The performance of this option is also quite good. It may be slower than | |
891 the inline methods when you often open and close small files however. | |
892 The cost of the cryptographic handshake at the start of an @command{scp} | |
893 session can begin to absorb the advantage that the lack of encoding and | |
894 decoding presents. | |
895 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
896 All the @command{ssh} based methods support the kludgy @samp{-p} |
46010
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
897 feature where you can specify a port number to connect to in the host |
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
898 name. For example, the host name @file{host#42} tells Tramp to |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
899 specify @samp{-p 42} in the argument list for @command{ssh}. |
46010
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
900 |
45861 | 901 |
902 @item @option{rsync} --- @command{ssh} and @command{rsync} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
903 @cindex method rsync |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
904 @cindex rsync method |
46366 | 905 @cindex rsync (with rsync method) |
906 @cindex ssh (with rsync method) | |
45861 | 907 |
908 Using the @command{ssh} command to connect securely to the remote | |
909 machine and the @command{rsync} command to transfer files is almost | |
910 identical to the @option{scp} method. | |
911 | |
912 While @command{rsync} performs much better than @command{scp} when | |
913 transferring files that exist on both hosts, this advantage is lost if | |
914 the file exists only on one side of the connection. | |
915 | |
916 The @command{rsync} based method may be considerably faster than the | |
917 @command{rcp} based methods when writing to the remote system. Reading | |
918 files to the local machine is no faster than with a direct copy. | |
919 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
920 This method supports the @samp{-p} hack. |
46010
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
921 |
45861 | 922 |
923 @item @option{scpx} --- @command{ssh} and @command{scp} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
924 @cindex method scpx |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
925 @cindex scpx method |
46366 | 926 @cindex scp (with scpx method) |
927 @cindex ssh (with scpx method) | |
928 @cindex Cygwin (with scpx method) | |
45861 | 929 |
930 As you expect, this is similar to @option{scp}, only a little | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
931 different. Whereas @option{scp} opens a normal interactive shell on |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
932 the remote host, this option uses @samp{ssh -t -t @var{host} -l |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
933 @var{user} /bin/sh} to open a connection. This is useful for users |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
934 where the normal login shell is set up to ask them a number of |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
935 questions when logging in. This procedure avoids these questions, and |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
936 just gives @tramp{} a more-or-less `standard' login shell to work |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
937 with. |
45861 | 938 |
939 This is also useful for Windows users where @command{ssh}, when | |
940 invoked from an Emacs buffer, tells them that it is not allocating a | |
941 pseudo tty. When this happens, the login shell is wont to not print | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
942 any shell prompt, which confuses @tramp{} mightily. Maybe this |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
943 applies to the Cygwin port of SSH. |
45861 | 944 |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
945 This method supports the @samp{-p} hack. |
46010
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
946 |
45861 | 947 |
948 @item @option{pscp} --- @command{plink} and @command{pscp} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
949 @cindex method pscp |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
950 @cindex pscp method |
46366 | 951 @cindex pscp (with pscp method) |
952 @cindex plink (with pscp method) | |
953 @cindex PuTTY (with pscp method) | |
45861 | 954 |
955 This method is similar to @option{scp}, but it uses the | |
956 @command{plink} command to connect to the remote host, and it uses | |
957 @command{pscp} for transferring the files. These programs are part | |
958 of PuTTY, an SSH implementation for Windows. | |
959 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
960 CCC: Does @command{plink} support the @samp{-p} hack? |
46010
d07b0e5f80b9
(tramp-open-connection-rsh): Support a kludgy feature for the
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
45979
diff
changeset
|
961 |
45861 | 962 |
963 @item @option{fcp} --- @command{fsh} and @command{fcp} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
964 @cindex method fcp |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
965 @cindex fcp method |
46366 | 966 @cindex fsh (with fcp method) |
967 @cindex fcp (with fcp method) | |
45861 | 968 |
969 This method is similar to @option{scp}, but it uses the @command{fsh} | |
970 command to connect to the remote host, and it uses @command{fcp} for | |
971 transferring the files. @command{fsh/fcp} are a front-end for | |
972 @command{ssh} which allow for reusing the same @command{ssh} session | |
973 for submitting several commands. This avoids the startup overhead of | |
974 @command{scp} (which has to establish a secure connection whenever it | |
975 is called). Note, however, that you can also use one of the inline | |
976 methods to achieve a similar effect. | |
977 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
978 This method uses the command @samp{fsh @var{host} -l @var{user} |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
979 /bin/sh -i} to establish the connection, it does not work to just say |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
980 @command{fsh @var{host} -l @var{user}}. |
45861 | 981 |
46366 | 982 @cindex method fsh |
983 @cindex fsh method | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
984 There is no inline method using @command{fsh} as the multiplexing |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
985 provided by the program is not very useful in our context. @tramp{} |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
986 opens just one connection to the remote host and then keeps it open, |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
987 anyway. |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
988 |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
989 @end table |
45861 | 990 |
991 @node Multi-hop Methods | |
992 @section Connecting to a remote host using multiple hops | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
993 @cindex multi-hop methods |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
994 @cindex methods, multi-hop |
45861 | 995 |
996 Sometimes, the methods described before are not sufficient. Sometimes, | |
997 it is not possible to connect to a remote host using a simple command. | |
998 For example, if you are in a secured network, you might have to log in | |
999 to a `bastion host' first before you can connect to the outside world. | |
1000 Of course, the target host may also require a bastion host. The format | |
1001 of multi-hop filenames is slightly different than the format of normal | |
1002 @tramp{} methods. | |
1003 | |
1004 A multi-hop file name specifies a method, a number of hops, and a path | |
1005 name on the remote system. The method specifies how the file is | |
1006 transferred through the inline connection. The following two multi-hop | |
1007 methods are available: | |
1008 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1009 @table @asis |
45861 | 1010 @item @option{multi} --- base64 encoding with @command{mimencode} |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1011 @cindex method multi |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1012 @cindex multi method |
46366 | 1013 @cindex mimencode (with multi method) |
1014 @cindex base-64 encoding (with multi method) | |
45861 | 1015 |
1016 The file is transferred through the connection in base64 encoding. Uses | |
1017 the @command{mimencode} program for doing encoding and decoding, but | |
1018 uses an Emacs internal implementation on the local host if available. | |
1019 | |
1020 @item @option{multiu} --- use commands @command{uuencode} and @command{uudecode} | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1021 @cindex method multiu |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1022 @cindex multiu method |
46366 | 1023 @cindex uuencode (with multiu method) |
45861 | 1024 |
1025 The file is transferred through the connection in `uu' encoding. Uses | |
1026 the @command{uuencode} and @command{uudecode} programs for encoding and | |
1027 decoding, but uses a Lisp implementation for decoding on the local host | |
1028 if available. | |
1029 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1030 @end table |
45861 | 1031 |
1032 Each hop consists of a @dfn{hop method} specification, a user name and a | |
1033 host name. The following hop methods are (currently) available: | |
1034 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1035 @table @option |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1036 @item telnet |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1037 @cindex hop method telnet |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1038 @cindex telnet hop method |
45861 | 1039 |
1040 Uses the well-known @command{telnet} program to connect to the host. | |
1041 Whereas user name and host name are supplied in the file name, the | |
1042 user is queried for the password. | |
1043 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1044 @item rsh |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1045 @cindex hop method rsh |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1046 @cindex rsh hop method |
45861 | 1047 |
1048 This uses @command{rsh} to connect to the host. You do not need to | |
1049 enter a password unless @command{rsh} explicitly asks for it. | |
1050 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1051 @item ssh |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1052 @cindex hop method ssh |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1053 @cindex ssh hop method |
45861 | 1054 |
1055 This uses @command{ssh} to connect to the host. You might have to enter | |
1056 a password or a pass phrase. | |
1057 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1058 @item su |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1059 @cindex hop method su |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1060 @cindex su hop method |
45861 | 1061 |
1062 This method does not actually contact a different host, but it allows | |
1063 you to become a different user on the host you're currently on. This | |
1064 might be useful if you want to edit files as root, but the remote host | |
1065 does not allow remote root logins. In this case you can use | |
1066 @option{telnet}, @option{rsh} or @option{ssh} to connect to the | |
1067 remote host as a non-root user, then use an @option{su} hop to become | |
1068 root. But @option{su} need not be the last hop in a sequence, you could | |
1069 also use it somewhere in the middle, if the need arises. | |
1070 | |
1071 Even though you @emph{must} specify both user and host with a | |
1072 @option{su} hop, the host name is ignored and only the user name is | |
1073 used. | |
1074 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1075 @item sudo |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1076 @cindex hop method sudo |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1077 @cindex sudo hop method |
45861 | 1078 |
1079 This is similar to the @option{su} hop, except that it uses | |
1080 @command{sudo} rather than @command{su} to become a different user. | |
1081 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1082 @end table |
45861 | 1083 |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1084 Some people might wish to use port forwarding with @command{ssh} or |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1085 maybe they have to use a nonstandard port. This can be accomplished |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1086 by putting a stanza in @file{~/.ssh/config} for the account which |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1087 specifies a different port number for a certain host name. But it can |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1088 also be accomplished within Tramp, by adding a multi-hop method. For |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1089 example: |
45861 | 1090 |
1091 @lisp | |
1092 (add-to-list 'tramp-multi-connection-function-alist | |
1093 '("sshf" tramp-multi-connect-rlogin "ssh %h -l %u -p 4400%n")) | |
1094 @end lisp | |
1095 | |
1096 Now you can use a @code{sshf} hop which connects to port 4400 instead of | |
1097 the standard port. | |
1098 | |
1099 | |
1100 @node Default Method | |
1101 @section Selecting a default method | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1102 @cindex default method |
45861 | 1103 |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1104 @vindex tramp-default-method |
45861 | 1105 When you select an appropriate transfer method for your typical usage |
1106 you should set the variable @var{tramp-default-method} to reflect that | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1107 choice. This variable controls which method will be used when a method |
45861 | 1108 is not specified in the @tramp{} file path. For example: |
1109 | |
1110 @lisp | |
1111 (setq tramp-default-method "scp") | |
1112 @end lisp | |
1113 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1114 @vindex tramp-default-method-alist |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1115 You can also specify different methods for certain user/host |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1116 combinations, via the variable @var{tramp-default-method-alist}. For |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1117 example, the following two lines specify to use the @option{sm} |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1118 method for all user names matching @samp{john} and the @option{rsync} |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1119 method for all host names matching @samp{lily}. The third line |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1120 specifies to use the @option{sum} method for the user @samp{root} on |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1121 the machine @samp{localhost}. |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1122 |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1123 @lisp |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1124 (add-to-list 'tramp-default-method-alist '("" "john" "sm")) |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1125 (add-to-list 'tramp-default-method-alist '("lily" "" "rsync")) |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1126 (add-to-list 'tramp-default-method-alist |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1127 '("\\`root\\'" "\\`localhost\\'" "sum")) |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1128 @end lisp |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1129 |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1130 @noindent |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1131 See the documentation for the variable |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1132 @var{tramp-default-method-alist} for more details. |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1133 |
45861 | 1134 External transfer methods are normally preferable to inline transfer |
1135 methods, giving better performance. They may not be useful if you use | |
1136 many remote machines where you cannot log in without a password. | |
1137 | |
1138 @xref{Inline methods}. | |
1139 @xref{External transfer methods}. | |
1140 @xref{Multi-hop Methods}. | |
1141 | |
1142 Another consideration with the selection of transfer methods is the | |
1143 environment you will use them in and, especially when used over the | |
1144 Internet, the security implications of your preferred method. | |
1145 | |
1146 The @command{rsh} and @command{telnet} methods send your password as | |
1147 plain text as you log in to the remote machine, as well as transferring | |
1148 the files in such a way that the content can easily be read from other | |
1149 machines. | |
1150 | |
1151 If you need to connect to remote systems that are accessible from the | |
1152 Internet, you should give serious thought to using @command{ssh} based | |
1153 methods to connect. These provide a much higher level of security, | |
1154 making it a non-trivial exercise for someone to obtain your password or | |
1155 read the content of the files you are editing. | |
1156 | |
1157 @node Customizing Methods | |
1158 @section Using Non-Standard Methods | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1159 @cindex customizing methods |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1160 @cindex using non-standard methods |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1161 @cindex create your own methods |
45861 | 1162 |
1163 There is a variable @code{tramp-methods} which you can change if the | |
1164 predefined methods don't seem right. | |
1165 | |
1166 For the time being, I'll refer you to the Lisp documentation of that | |
1167 variable, accessible with @kbd{C-h v tramp-methods @key{RET}}. | |
1168 | |
1169 | |
1170 @node Remote Programs | |
1171 @section How @tramp{} finds and uses programs on the remote machine. | |
1172 | |
1173 @tramp{} depends on a number of programs on the remote host in order to | |
1174 function, including @command{ls}, @command{test}, @command{find} and | |
1175 @command{cat}. | |
1176 | |
1177 In addition to these required tools, there are various tools that may be | |
1178 required based on the connection method. See @ref{Inline methods} and | |
1179 @ref{External transfer methods} for details on these. | |
1180 | |
1181 Certain other tools, such as @command{perl} (or @command{perl5}) and | |
1182 @command{grep} will be used if they can be found. When they are | |
1183 available, they are used to improve the performance and accuracy of | |
1184 remote file access. | |
1185 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1186 @vindex tramp-remote-path |
45861 | 1187 When @tramp{} connects to the remote machine, it searches for the |
1188 programs that it can use. The variable @var{tramp-remote-path} controls | |
1189 the directories searched on the remote machine. | |
1190 | |
1191 By default, this is set to a reasonable set of defaults for most | |
1192 machines. It is possible, however, that your local (or remote ;) system | |
1193 administrator has put the tools you want in some obscure local | |
1194 directory. | |
1195 | |
1196 In this case, you can still use them with @tramp{}. You simply need to | |
1197 add code to your @file{.emacs} to add the directory to the remote path. | |
1198 This will then be searched by @tramp{} when you connect and the software | |
1199 found. | |
1200 | |
1201 To add a directory to the remote search path, you could use code such | |
1202 as: | |
1203 | |
1204 @example | |
1205 (require 'tramp) @i{; @tramp{} must be loaded before this} | |
1206 @i{; happens.} | |
1207 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1208 @i{; We have @command{perl} in "/usr/local/perl/bin"} |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1209 (add-to-list 'tramp-remote-path "/usr/local/perl/bin") |
45861 | 1210 @end example |
1211 | |
1212 @node Remote shell setup | |
1213 @comment node-name, next, previous, up | |
1214 @section Remote shell setup hints | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1215 @cindex remote shell setup |
46366 | 1216 @cindex @file{.profile} file |
1217 @cindex @file{.login} file | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1218 @cindex shell init files |
45861 | 1219 |
1220 As explained in the @ref{Overview} section, @tramp{} connects to the | |
1221 remote host and talks to the shell it finds there. Of course, when you | |
1222 log in, the shell executes its init files. Suppose your init file | |
1223 requires you to enter the birthdate of your mother; clearly @tramp{} | |
1224 does not know this and hence fails to log you in to that host. | |
1225 | |
1226 There are different possible strategies for pursuing this problem. One | |
1227 strategy is to enable @tramp{} to deal with all possible situations. | |
1228 This is a losing battle, since it is not possible to deal with | |
1229 @emph{all} situations. The other strategy is to require you to set up | |
1230 the remote host such that it behaves like @tramp{} expect. This might | |
1231 be inconvenient because you have to invest a lot of effort into shell | |
1232 setup before you can begin to use @tramp{}. | |
1233 | |
1234 The package, therefore, pursues a combined approach. It tries to figure | |
1235 out some of the more common setups, and only requires you to avoid | |
1236 really exotic stuff. For example, it looks through a list of | |
1237 directories to find some programs on the remote host. And also, it | |
1238 knows that it is not obvious how to check whether a file exist, and | |
1239 therefore it tries different possibilities. (On some hosts and shells, | |
1240 the command @code{test -e} does the trick, on some hosts the shell | |
1241 builtin doesn't work but the program @code{/usr/bin/test -e} or | |
1242 @code{/bin/test -e} works. And on still other hosts, @code{ls -d} is | |
1243 the right way to do this.) | |
1244 | |
1245 Below you find a discussion of a few things that @tramp{} does not deal | |
1246 with, and that you therefore have to set up correctly. | |
1247 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1248 @table @asis |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1249 @item @var{shell-prompt-pattern} |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1250 @vindex shell-prompt-pattern |
45861 | 1251 |
1252 After logging in to the remote host, @tramp{} has to wait for the remote | |
1253 shell startup to finish before it can send commands to the remote | |
1254 shell. The strategy here is to wait for the shell prompt. In order to | |
1255 recognize the shell prompt, the variable @code{shell-prompt-pattern} has | |
1256 to be set correctly to recognize the shell prompt on the remote host. | |
1257 | |
46346
49f06e689a20
* files.texi (Remote Files): Explain new unified file name synatx.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46010
diff
changeset
|
1258 Note that Tramp requires the match for @code{shell-prompt-pattern} to |
49f06e689a20
* files.texi (Remote Files): Explain new unified file name synatx.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46010
diff
changeset
|
1259 be at the end of the buffer. Many people have something like the |
49f06e689a20
* files.texi (Remote Files): Explain new unified file name synatx.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46010
diff
changeset
|
1260 following as the value for the variable: @code{"^[^>$][>$] *"}. Now |
49f06e689a20
* files.texi (Remote Files): Explain new unified file name synatx.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46010
diff
changeset
|
1261 suppose your shell prompt is @code{a <b> c $ }. In this case, Tramp |
49f06e689a20
* files.texi (Remote Files): Explain new unified file name synatx.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46010
diff
changeset
|
1262 recognizes the @code{>} character as the end of the prompt, but it is |
49f06e689a20
* files.texi (Remote Files): Explain new unified file name synatx.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46010
diff
changeset
|
1263 not at the end of the buffer. |
49f06e689a20
* files.texi (Remote Files): Explain new unified file name synatx.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46010
diff
changeset
|
1264 |
45861 | 1265 @item @code{tset} and other questions |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1266 @cindex Unix command tset |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1267 @cindex tset Unix command |
45861 | 1268 |
1269 Some people invoke the @code{tset} program from their shell startup | |
1270 scripts which asks the user about the terminal type of the shell. Maybe | |
1271 some shells ask other questions when they are started. @tramp{} does | |
1272 not know how to answer these questions. (A facility for enabling | |
1273 @tramp{} to answer these questions is planned for some future version, | |
1274 but don't hold your breath.) | |
1275 | |
1276 Therefore, you should take care that the shell does not ask any | |
1277 questions when invoked from @tramp{}. You can do this by checking the | |
1278 @code{TERM} environment variable, it will be set to @code{dumb} when | |
1279 connecting. | |
1280 | |
1281 @vindex tramp-terminal-type | |
1282 The variable @code{tramp-terminal-type} can be used to change this value | |
1283 @code{dumb}. | |
1284 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1285 @end table |
45861 | 1286 |
1287 | |
1288 @node Windows setup hints | |
1289 @section Issues with Cygwin ssh | |
46366 | 1290 @cindex Cygwin, issues |
45861 | 1291 |
1292 This section needs a lot of work! Please help. | |
1293 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1294 @cindex method smx with Cygwin |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1295 @cindex smx method with Cygwin |
45861 | 1296 If you use the Cygwin installation of ssh (you have to explicitly select |
1297 it in the installer), then it should work out of the box to just select | |
1298 @code{smx} as the connection method. You can find information about | |
1299 setting up Cygwin in their FAQ at @uref{http://cygwin.com/faq/}. | |
1300 | |
1301 | |
1302 @node Usage | |
1303 @chapter Using @tramp | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1304 @cindex using @tramp |
45861 | 1305 |
1306 Once you have installed @tramp{} it will operate fairly transparently. You | |
1307 will be able to access files on any remote machine that you can log in | |
1308 to as though they were local. | |
1309 | |
1310 Files are specified to @tramp{} using a formalized syntax specifying the | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1311 details of the system to connect to. This is similar to the syntax used |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1312 by the @command{EFS} and @command{Ange-FTP} packages. |
45861 | 1313 |
1314 | |
1315 @menu | |
1316 * Filename Syntax:: @tramp{} filename conventions. | |
1317 * Multi-hop filename syntax:: Multi-hop filename conventions | |
1318 * Dired:: Dired and filename completion. | |
1319 @end menu | |
1320 | |
1321 | |
1322 @node Filename Syntax | |
1323 @section @tramp{} filename conventions | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1324 @cindex filename syntax |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1325 @cindex filename examples |
45861 | 1326 |
46348 | 1327 On Emacs, the Ange-FTP and Tramp filenames use a unified syntax. On |
1328 XEmacs, EFS and Tramp use different formats for the filenames. | |
1329 Therefore, the following will describe the Emacs and XEmacs cases | |
1330 separately. | |
45861 | 1331 |
46348 | 1332 On Emacs, to access the file @var{path} on the remote machine |
1333 @var{machine} you would specify the filename | |
1334 @file{/@var{machine}:@var{path}}. This will connect to @var{machine} | |
1335 and transfer the file using the default method. @xref{Default | |
1336 Method}. On XEmacs, use @file{/[@var{machine}]@var{path}}. (The | |
1337 square brackets are part of the file name.) | |
1338 | |
1339 Some examples of @tramp{} filenames are shown below. In each case, | |
1340 the Emacs-style filename is shown first, then the XEmacs-style | |
1341 filename. | |
45861 | 1342 |
1343 @table @file | |
46348 | 1344 @item /melancholia:.emacs |
1345 @itemx /[melancholia].emacs | |
45861 | 1346 Edit the file @file{.emacs} in your home directory on the machine |
1347 @code{melancholia}. | |
1348 | |
46348 | 1349 @item /melancholia.danann.net:.emacs |
1350 @itemx /[melancholia.danann.net].emacs | |
45861 | 1351 This edits the same file, using the fully qualified domain name of |
1352 the machine. | |
1353 | |
46348 | 1354 @item /melancholia:~/.emacs |
1355 @itemx /[melancholia]~/.emacs | |
45861 | 1356 This also edits the same file --- the @file{~} is expanded to your |
1357 home directory on the remote machine, just like it is locally. | |
1358 | |
46348 | 1359 @item /melancholia:~daniel/.emacs |
1360 @itemx /[melancholia]~daniel/.emacs | |
45861 | 1361 This edits the file @file{.emacs} in the home directory of the user |
1362 @code{daniel} on the machine @code{melancholia}. The @file{~<user>} | |
1363 construct is expanded to the home directory of that user on the remote | |
1364 machine. | |
1365 | |
46348 | 1366 @item /melancholia:/etc/squid.conf |
1367 @itemx /[melancholia]/etc/squid.conf | |
45861 | 1368 This edits the file @file{/etc/squid.conf} on the machine |
1369 @code{melancholia}. | |
1370 | |
1371 @end table | |
1372 | |
1373 Unless you specify a different name to use, @tramp{} will use the current | |
1374 local user name as the remote user name to log in with. If you need to | |
1375 log in as a different user, you can specify the user name as part of the | |
1376 filename. | |
1377 | |
46348 | 1378 On Emacs, to log in to the remote machine as a specific user, you use |
1379 the syntax @file{/@var{user}@@@var{machine}:/path/to.file}. On | |
1380 XEmacs, use @file{/[@var{user}@@@var{machine}]/path/to.file}. That | |
1381 means that connecting to @code{melancholia} as @code{daniel} and | |
1382 editing @file{.emacs} in your home directory you would specify | |
1383 @file{/daniel@@melancholia:.emacs} on Emacs and | |
1384 @file{/[daniel@@melancholia].emacs} on XEmacs. | |
45861 | 1385 |
1386 | |
1387 It is also possible to specify other file transfer methods | |
46348 | 1388 (@pxref{Default Method}) as part of the filename. On Emacs, this is |
1389 done by puttig the method before the user and host name, as in | |
1390 @file{/@var{method}:} (note the trailing colon). On XEmacs, it is | |
1391 done by replacing the initial @file{/[} with @file{/[<method>/}. | |
1392 (Note the trailing slash!) The user, machine and file specification | |
1393 remain the same. | |
45861 | 1394 |
46348 | 1395 So, to connect to the machine @code{melancholia} as @code{daniel}, |
1396 using the @option{su} method to transfer files, and edit @file{.emacs} | |
1397 in my home directory I would specify the filename | |
1398 @file{/su:daniel@@melancholia:.emacs} on Emacs and | |
1399 @file{/[su/daniel@@melancholia].emacs} on XEmacs. | |
45861 | 1400 |
1401 | |
1402 @node Multi-hop filename syntax | |
1403 @section Multi-hop filename conventions | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1404 @cindex filename syntax for multi-hop files |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1405 @cindex multi-hop filename syntax |
45861 | 1406 |
1407 The syntax of multi-hop file names is necessarily slightly different | |
1408 than the syntax of other @tramp{} file names. Here's an example multi-hop | |
46348 | 1409 file name, first in Emacs syntax and then in XEmacs syntax: |
45861 | 1410 |
46348 | 1411 @file{/multi:rsh:out@@gate:telnet:kai@@real.host:/path/to.file} |
45861 | 1412 @file{/[multi/rsh:out@@gate/telnet:kai@@real.host]/path/to.file} |
1413 | |
1414 This is quite a mouthful. So let's go through it step by step. The | |
46348 | 1415 file name consists of three parts. On Emacs, the parts are separated |
1416 by colons, on XEmacs they are separated by slashes and square | |
1417 brackets. The first part is @file{/multi:} (or @file{/[multi}), the | |
1418 method specification. The second part is | |
1419 @file{rsh:out@@gate:telnet:kai@@real.host} (or | |
1420 @file{rsh:out@@gate/telnet:kai@@real.host}) and specifies the hops. | |
1421 (Yes, on Emacs the second part may contain even more colons, so that's why | |
1422 this file name has more than two colons in it.) The final part is | |
1423 @file{/path/to.file} and specifies the file name on the remote host. | |
45861 | 1424 |
1425 The first part and the final part should be clear. @ref{Multi-hop | |
1426 Methods}, for a list of alternatives for the method specification. | |
1427 | |
1428 The second part can be subdivided again into components, so-called hops. | |
1429 In the above file name, there are two hops, @file{rsh:out@@gate} and | |
1430 @file{telnet:kai@@real.host}. | |
1431 | |
1432 Each hop can @emph{again} be subdivided into (three) components, the | |
1433 @dfn{hop method}, the @dfn{user name} and the @dfn{host name}. The | |
1434 meaning of the second and third component should be clear, and the hop | |
1435 method says what program to use to perform that hop. | |
1436 | |
1437 The first hop, @file{rsh:out@@gate}, says to use @command{rsh} to log in | |
1438 as user @code{out} to the host @code{gate}. Starting at that host, the | |
1439 second hop, @file{telnet:kai@@real.host}, says to use @command{telnet} | |
1440 to log in as user @code{kai} to host @code{real.host}. | |
1441 | |
1442 @xref{Multi-hop Methods}, for a list of possible hop method values. The | |
1443 variable @var{tramp-multi-connection-function-alist} contains the list of | |
1444 possible hop methods and information on how to execute them, should you | |
1445 want to add your own. | |
1446 | |
1447 | |
1448 @node Dired | |
1449 @section Dired and filename completion | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1450 @cindex dired |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1451 @cindex filename completion |
45861 | 1452 |
1453 @tramp{} works transparently with dired, enabling you to use this powerful | |
1454 file management tool to manage files on any machine you have access to | |
1455 over the Internet. | |
1456 | |
1457 Filename completion also works with @tramp{} for files on remote machines | |
1458 although there is no completion for user names or machine names at this | |
1459 stage. | |
1460 | |
1461 As filename completion needs to fetch the listing of files from the | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1462 remote machine, this feature is sometimes fairly slow. As @tramp{} does not |
45861 | 1463 yet cache the results of directory listing, there is no gain in |
1464 performance the second time you complete filenames. | |
1465 | |
1466 If you need to browse a directory tree, Dired is a better choice, at | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1467 present, than filename completion. Dired has its own cache mechanism |
45861 | 1468 and will only fetch the directory listing once. |
1469 | |
1470 | |
1471 @node Bug Reports | |
1472 @chapter Reporting Bugs and Problems | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1473 @cindex bug reports |
45861 | 1474 |
1475 Bugs and problems with @tramp{} are actively worked on by the development | |
1476 team. Feature requests and suggestions are also more than welcome. | |
1477 | |
1478 The @tramp{} mailing list is a great place to get information on working | |
1479 with @tramp{}, solving problems and general discussion and advice on topics | |
1480 relating to the package. | |
1481 | |
1482 The mailing list is at @email{tramp-devel@@mail.freesoftware.fsf.org}. | |
1483 Messages sent to this address go to all the subscribers. This is | |
1484 @emph{not} the address to send subscription requests to. | |
1485 | |
1486 For help on subscribing to the list, send mail to the administrative | |
1487 address, @email{tramp-devel-request@@mail.freesoftware.fsf.org}, with the | |
1488 subject @samp{help}. | |
1489 | |
1490 To report a bug in @tramp{}, you should execute @kbd{M-x tramp-bug}. This | |
1491 will automatically generate a buffer with the details of your system and | |
1492 @tramp{} version. | |
1493 | |
1494 When submitting a bug report, please try to describe in excruciating | |
1495 detail the steps required to reproduce the problem, the setup of the | |
1496 remote machine and any special conditions that exist. | |
1497 | |
1498 If you can identify a minimal test case that reproduces the problem, | |
1499 include that with your bug report. This will make it much easier for the | |
1500 development team to analyze and correct the problem. | |
1501 | |
1502 @node Frequently Asked Questions | |
1503 @chapter Frequently Asked Questions | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1504 @cindex frequently asked questions |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1505 @cindex FAQ |
45861 | 1506 |
1507 @itemize @bullet | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1508 @item |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1509 Where can I get the latest @tramp{}? |
45861 | 1510 |
1511 @tramp{} is available at | |
1512 @uref{ftp://ls6-ftp.cs.uni-dortmund.de/pub/src/emacs/tramp.tar.gz}. | |
1513 There is also a Savannah project page, at | |
1514 @uref{https://savannah.gnu.org/projects/tramp/}. | |
1515 | |
1516 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1517 @item |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1518 Which systems does it work on? |
45861 | 1519 |
1520 The package has been used successfully on Emacs 20 and Emacs 21, as well | |
1521 as XEmacs 21. XEmacs 20 is more problematic, see the notes in | |
1522 @file{tramp.el}. I don't think anybody has really tried it on Emacs 19. | |
1523 | |
1524 The package was intended to work on Unix, and it really expects a | |
1525 Unix-like system on the remote end, but some people seemed to have some | |
1526 success getting it to work on NT Emacs. | |
1527 | |
1528 There are some informations on Tramp on NT at the following URL; many | |
1529 thanks to Joe Stoy for providing the information: | |
1530 @uref{ftp://ftp.comlab.ox.ac.uk/tmp/Joe.Stoy/} | |
1531 | |
1532 The above mostly contains patches to old ssh versions; Tom Roche has a | |
1533 Web page with instructions: | |
1534 @uref{http://www4.ncsu.edu/~tlroche/plinkTramp.html} | |
1535 | |
1536 ??? Is the XEmacs info correct? | |
1537 | |
1538 ??? Can somebody provide some information for getting it to work on NT | |
1539 Emacs? I think there was some issue with @command{ssh}? | |
1540 | |
1541 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1542 @item |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1543 I can't stop EFS starting with XEmacs |
45861 | 1544 |
1545 Not all the older versions of @tramp{} supported XEmacs correctly. The | |
1546 first thing to do is to make sure that you have the latest version of | |
1547 @tramp{} installed. | |
1548 | |
1549 If you do, please try and find out exactly the conditions required for | |
1550 the @code{EFS} handlers to fire. If you can, putting a breakpoint on | |
1551 @code{efs-ftp-path} and sending in the stack trace along with your bug | |
1552 report would make it easier for the developers to work out what is going | |
1553 wrong. | |
1554 | |
1555 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1556 @item |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1557 File name completion does not work with @tramp{} |
45861 | 1558 |
1559 When you log in to the remote machine, do you see the output of | |
1560 @command{ls} in color? If so, this may be the cause of your problems. | |
1561 | |
1562 @command{ls} outputs @acronym{ANSI} escape sequences that your terminal | |
1563 emulator interprets to set the colors. These escape sequences will | |
1564 confuse @tramp{} however. | |
1565 | |
1566 In your @file{.bashrc}, @file{.profile} or equivalent on the remote | |
1567 machine you probably have an alias configured that adds the option | |
1568 @option{--color=yes} or @option{--color=auto}. | |
1569 | |
1570 You should remove that alias and ensure that a new login @emph{does not} | |
1571 display the output of @command{ls} in color. If you still cannot use | |
1572 filename completion, report a bug to the @tramp{} developers. | |
1573 | |
1574 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1575 @item |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1576 File name completion does not work in large directories |
45861 | 1577 |
1578 @tramp{} uses globbing for some operations. (Globbing means to use the | |
1579 shell to expand wildcards such as `*.c'.) This might create long | |
1580 command lines, especially in directories with many files. Some shell | |
1581 choke on long command lines, or don't cope well with the globbing | |
1582 itself. | |
1583 | |
1584 If you have a large directory on the remote end, you may wish to execute | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1585 a command like @samp{ls -d * ..?* > /dev/null} and see if it hangs. |
45861 | 1586 Note that you must first start the right shell, which might be |
1587 @command{/bin/sh}, @command{ksh} or @command{bash}, depending on which | |
1588 of those supports tilde expansion. | |
1589 | |
1590 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1591 @item |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1592 What kinds of systems does @tramp{} work on |
45861 | 1593 |
1594 @tramp{} really expects the remote system to be a Unix-like system. The | |
1595 local system should preferably be Unix-like, as well, but @tramp{} might | |
1596 work on NT with some tweaking. | |
1597 | |
1598 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1599 @item |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1600 How can I get notified when @tramp{} file transfers are complete? |
45861 | 1601 |
1602 The following snippet can be put in your @file{~/.emacs} file. It makes | |
1603 Emacs beep after reading from or writing to the remote host. | |
1604 | |
1605 @lisp | |
1606 (defadvice tramp-handle-write-region | |
1607 (after tramp-write-beep-advice activate) | |
1608 " make tramp beep after writing a file." | |
1609 (interactive) | |
1610 (beep)) | |
1611 (defadvice tramp-handle-do-copy-or-rename-file | |
1612 (after tramp-copy-beep-advice activate) | |
1613 " make tramp beep after copying a file." | |
1614 (interactive) | |
1615 (beep)) | |
1616 (defadvice tramp-handle-insert-file-contents | |
1617 (after tramp-copy-beep-advice activate) | |
1618 " make tramp beep after copying a file." | |
1619 (interactive) | |
1620 (beep)) | |
1621 @end lisp | |
1622 | |
1623 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1624 @item |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1625 There's this @file{~/.sh_history} file on the remote host which keeps |
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1626 growing and growing. What's that? |
45861 | 1627 |
1628 Sometimes, @tramp{} starts @code{ksh} on the remote host for tilde | |
1629 expansion. Maybe @code{ksh} saves the history by default. @tramp{} | |
1630 tries to turn off saving the history, but maybe you have to help. For | |
1631 example, you could put this in your @file{.kshrc}: | |
1632 | |
1633 @example | |
1634 if [ -f $HOME/.sh_history ] ; then | |
1635 /bin/rm $HOME/.sh_history | |
1636 fi | |
1637 if [ "$@{HISTFILE-unset@}" != "unset" ] ; then | |
1638 unset HISTFILE | |
1639 fi | |
1640 if [ "$@{HISTSIZE-unset@}" != "unset" ] ; then | |
1641 unset HISTSIZE | |
1642 fi | |
1643 @end example | |
1644 | |
1645 @end itemize | |
1646 | |
1647 | |
1648 @c For the developer | |
1649 @node Version Control | |
1650 @chapter The inner workings of remote version control | |
1651 | |
46361
a3acca116f2f
Comply with Texinfo coding standards. Suggestions by Eli.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46348
diff
changeset
|
1652 Unlike EFS and Ange-FTP, @tramp{} has full shell access to the remote |
45861 | 1653 machine. This makes it possible to provide version control for files |
1654 accessed under @tramp{}. | |
1655 | |
1656 The actual version control binaries must be installed on the remote | |
1657 machine, accessible in the directories specified in | |
1658 @var{tramp-remote-path}. | |
1659 | |
1660 This transparent integration with the version control systems is one of | |
1661 the most valuable features provided by @tramp{}, but it is far from perfect. | |
1662 Work is ongoing to improve the transparency of the system. | |
1663 | |
1664 @menu | |
1665 * Version Controlled Files:: Determining if a file is under version control. | |
1666 * Remote Commands:: Executing the version control commands on the remote machine. | |
1667 * Changed workfiles:: Detecting if the working file has changed. | |
1668 * Checking out files:: Bringing the workfile out of the repository. | |
1669 * Miscellaneous Version Control:: Things related to Version Control that don't fit elsewhere | |
1670 @end menu | |
1671 | |
1672 | |
1673 @node Version Controlled Files | |
1674 @section Determining if a file is under version control | |
1675 | |
1676 The VC package uses the existence of on-disk revision control master | |
1677 files to determine if a given file is under revision control. These file | |
1678 tests happen on the remote machine through the standard @tramp{} mechanisms. | |
1679 | |
1680 | |
1681 @node Remote Commands | |
1682 @section Executing the version control commands on the remote machine | |
1683 | |
1684 There are no hooks provided by VC to allow intercepting of the version | |
1685 control command execution. The calls occur through the | |
1686 @code{call-process} mechanism, a function that is somewhat more | |
1687 efficient than the @code{shell-command} function but that does not | |
1688 provide hooks for remote execution of commands. | |
1689 | |
1690 To work around this, the functions @code{vc-do-command} and | |
1691 @code{vc-simple-command} have been advised to intercept requests for | |
1692 operations on files accessed via @tramp{}. | |
1693 | |
1694 In the case of a remote file, the @code{shell-command} interface is | |
1695 used, with some wrapper code, to provide the same functionality on the | |
1696 remote machine as would be seen on the local machine. | |
1697 | |
1698 | |
1699 @node Changed workfiles | |
1700 @section Detecting if the working file has changed | |
1701 | |
1702 As there is currently no way to get access to the mtime of a file on a | |
1703 remote machine in a portable way, the @code{vc-workfile-unchanged-p} | |
1704 function is advised to call an @tramp{} specific function for remote files. | |
1705 | |
1706 The @code{tramp-vc-workfile-unchanged-p} function uses the functioning VC | |
1707 diff functionality to determine if any changes have occurred between the | |
1708 workfile and the version control master. | |
1709 | |
1710 This requires that a shell command be executed remotely, a process that | |
1711 is notably heavier-weight than the mtime comparison used for local | |
1712 files. Unfortunately, unless a portable solution to the issue is found, | |
1713 this will remain the cost of remote version control. | |
1714 | |
1715 | |
1716 @node Checking out files | |
1717 @section Bringing the workfile out of the repository | |
1718 | |
1719 VC will, by default, check for remote files and refuse to act on them | |
1720 when checking out files from the repository. To work around this | |
1721 problem, the function @code{vc-checkout} knows about @tramp{} files and | |
1722 allows version control to occur. | |
1723 | |
1724 | |
1725 @node Miscellaneous Version Control | |
1726 @section Things related to Version Control that don't fit elsewhere | |
1727 | |
1728 Minor implementation details, &c. | |
1729 | |
1730 @menu | |
1731 * Remote File Ownership:: How VC determines who owns a workfile. | |
1732 * Back-end Versions:: How VC determines what release your RCS is. | |
1733 @end menu | |
1734 | |
1735 | |
1736 @node Remote File Ownership | |
1737 @subsection How VC determines who owns a workfile | |
1738 | |
1739 Emacs provides the @code{user-full-name} function to return the login name | |
1740 of the current user as well as mapping from arbitrary user id values | |
1741 back to login names. The VC code uses this functionality to map from the | |
1742 uid of the owner of a workfile to the login name in some circumstances. | |
1743 | |
1744 This will not, for obvious reasons, work if the remote system has a | |
1745 different set of logins. As such, it is necessary to delegate to the | |
1746 remote machine the job of determining the login name associated with a | |
1747 uid. | |
1748 | |
1749 Unfortunately, with the profusion of distributed management systems such | |
1750 as @code{NIS}, @code{NIS+} and @code{NetInfo}, there is no simple, | |
1751 reliable and portable method for performing this mapping. | |
1752 | |
1753 Thankfully, the only place in the VC code that depends on the mapping of | |
1754 a uid to a login name is the @code{vc-file-owner} function. This returns | |
1755 the login of the owner of the file as a string. | |
1756 | |
1757 This function has been advised to use the output of @command{ls} on the | |
1758 remote machine to determine the login name, delegating the problem of | |
1759 mapping the uid to the login to the remote system which should know more | |
1760 about it than I do. | |
1761 | |
1762 | |
1763 @node Back-end Versions | |
1764 @subsection How VC determines what release your RCS is | |
1765 | |
1766 VC needs to know what release your revision control binaries you are | |
1767 running as not all features VC supports are available with older | |
1768 versions of @command{rcs(1)}, @command{cvs(1)} or @command{sccs(1)}. | |
1769 | |
1770 The default implementation of VC determines this value the first time it | |
1771 is needed and then stores the value globally to avoid the overhead of | |
1772 executing a process and parsing its output each time the information is | |
1773 needed. | |
1774 | |
1775 Unfortunately, life is not quite so easy when remote version control | |
1776 comes into the picture. Each remote machine may have a different version | |
1777 of the version control tools and, while this is painful, we need to | |
1778 ensure that unavailable features are not used remotely. | |
1779 | |
1780 To resolve this issue, @tramp{} currently takes the sledgehammer | |
1781 approach of making the release values of the revision control tools | |
1782 local to each @tramp{} buffer, forcing VC to determine these values | |
1783 again each time a new file is visited. | |
1784 | |
1785 This has, quite obviously, some performance implications. Thankfully, | |
1786 most of the common operations performed by VC do not actually require | |
1787 that the remote version be known. This makes the problem far less | |
1788 apparent. | |
1789 | |
1790 Eventually these values will be captured by @tramp{} on a system by | |
1791 system basis and the results cached to improve performance. | |
1792 | |
1793 | |
1794 @node Files directories and paths | |
1795 @chapter How file names, directories and paths are mangled and managed. | |
1796 | |
1797 @menu | |
1798 * Path deconstruction:: Breaking a path into its components. | |
1799 @end menu | |
1800 | |
1801 | |
1802 @node Path deconstruction | |
1803 @section Breaking a path into its components. | |
1804 | |
1805 @tramp{} filenames are somewhat different, obviously, to ordinary path | |
1806 names. As such, the lisp functions @code{file-name-directory} and | |
1807 @code{file-name-nondirectory} are overridden within the @tramp{} package. | |
1808 | |
1809 Their replacements are reasonably simplistic in their approach. They | |
1810 dissect the filename, call the original handler on the remote path and | |
1811 then rebuild the @tramp{} path with the result. | |
1812 | |
1813 This allows the platform specific hacks in the original handlers to take | |
1814 effect while preserving the @tramp{} path information. | |
1815 | |
1816 | |
1817 @node Issues | |
1818 @chapter Debatable Issues and What Was Decided | |
1819 | |
1820 @itemize @bullet | |
1821 @item The uuencode method does not always work. | |
1822 | |
1823 Due to the design of @tramp{}, the encoding and decoding programs need to | |
1824 read from stdin and write to stdout. On some systems, @code{uudecode -o | |
1825 -} will read stdin and write the decoded file to stdout, on other | |
1826 systems @code{uudecode -p} does the same thing. But some systems have | |
1827 uudecode implementations which cannot do this at all---it is not | |
1828 possible to call these uudecode implementations with suitable parameters | |
1829 so that they write to stdout. | |
1830 | |
1831 Of course, this could be circumvented: the @code{begin foo 644} line | |
1832 could be rewritten to put in some temporary file name, then | |
1833 @code{uudecode} could be called, then the temp file could be printed and | |
1834 deleted. | |
1835 | |
1836 But I have decided that this is too fragile to reliably work, so on some | |
1837 systems you'll have to do without the uuencode methods. | |
1838 | |
1839 @item @tramp{} does not work on XEmacs 20. | |
1840 | |
1841 This is because it requires the macro @code{with-timeout} which does not | |
1842 appear to exist in XEmacs 20. I'm somewhat reluctant to add an | |
1843 emulation macro to @tramp{}, but if somebody who uses XEmacs 20 steps | |
1844 forward and wishes to implement and test it, please contact me or the | |
1845 mailing list. | |
1846 | |
46348 | 1847 @item The @tramp{} filename syntax differs between Emacs and XEmacs. |
1848 | |
1849 The Emacs maintainers wish to use a unified filename syntax for | |
1850 Ange-FTP and @tramp{} so that users don't have to learn a new | |
1851 syntax. It is sufficient to learn some extensions to the old syntax. | |
1852 | |
1853 For the XEmacs maintainers, the problems caused from using a unified | |
1854 filename syntax are greater than the gains. The XEmacs package | |
1855 system uses EFS for downloading new packages. So, obviously, EFS has | |
1856 to be installed from the start. If the filenames were unified, Tramp | |
1857 would have to be installed from the start, too. | |
1858 | |
45861 | 1859 @end itemize |
1860 | |
1861 | |
1862 @c End of tramp.texi - the TRAMP User Manual | |
1863 @bye | |
1864 | |
1865 @c TODO | |
1866 @c | |
1867 @c * Say something about the .login and .profile files of the remote | |
1868 @c shells. | |
1869 @c * Explain how tramp.el works in principle: open a shell on a remote | |
1870 @c host and then send commands to it. | |
46346
49f06e689a20
* files.texi (Remote Files): Explain new unified file name synatx.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46010
diff
changeset
|
1871 @c * Mention that bookmarks are a cool feature to go along with Tramp. |
49f06e689a20
* files.texi (Remote Files): Explain new unified file name synatx.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46010
diff
changeset
|
1872 @c * Make terminology "inline" vs "out-of-band" consistent. |
49f06e689a20
* files.texi (Remote Files): Explain new unified file name synatx.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
46010
diff
changeset
|
1873 @c It seems that "external" is also used instead of "out-of-band". |
45861 | 1874 |