Mercurial > emacs
annotate lisp/hilit-chg.el @ 24296:28d942c5d967
(vietnamese-viqr): Add charset-origin-alist property.
("Vietnamese"): Remove charset-origin-alist property.
author | Kenichi Handa <handa@m17n.org> |
---|---|
date | Fri, 12 Feb 1999 07:46:42 +0000 |
parents | ca8cd9d60c47 |
children | 9a9a307e9a57 |
rev | line source |
---|---|
22957 | 1 ;;; hilit-chg.el --- minor mode displaying buffer changes with special face |
2 | |
3 ;; Copyright (C) 1998 Free Software Foundation, Inc. | |
4 | |
23614 | 5 ;; Author: Richard Sharman <rsharman@pobox.com> |
22957 | 6 ;; Keywords: faces |
7 | |
23101 | 8 ;; This file is part of GNU Emacs. |
9 | |
22957 | 10 ;; This program is free software; you can redistribute it and/or modify |
11 ;; it under the terms of the GNU General Public License as published by | |
12 ;; the Free Software Foundation; either version 2, or (at your option) | |
13 ;; any later version. | |
14 | |
15 ;; This program is distributed in the hope that it will be useful, | |
16 ;; but WITHOUT ANY WARRANTY; without even the implied warranty of | |
17 ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
18 ;; GNU General Public License for more details. | |
19 | |
20 ;; You should have received a copy of the GNU General Public License | |
21 ;; along with GNU Emacs; see the file COPYING. If not, write to the | |
22 ;; Free Software Foundation, Inc., 59 Temple Place - Suite 330, | |
23 ;; Boston, MA 02111-1307, USA. | |
24 | |
25 | |
26 ;;; Commentary: | |
27 | |
28 ;; A minor mode: "Highlight Changes mode". | |
29 ;; | |
30 | |
31 ;; Highlight Changes mode has 2 submodes: active and passive. | |
32 ;; When active, changes to the buffer are displayed in a different face. | |
33 ;; When passive, any existing displayed changes are saved and new ones | |
34 ;; recorded but are not displayed differently. | |
35 ;; Why active and passive? Having the changes visible can be handy when you | |
36 ;; want the information but very distracting otherwise. So, you can keep | |
37 ;; Highlight Changes mode in passive state while you make your changes, toggle | |
38 ;; it on to active mode to see them, then toggle it back off to avoid | |
39 ;; distraction. | |
40 ;; | |
41 ;; When active, changes are displayed in `highlight-changes-face'. When | |
42 ;; text is deleted, the following character is displayed in | |
43 ;; `highlight-changes-delete-face' face. | |
44 ;; | |
45 ;; | |
46 ;; You can "age" different sets of changes by using | |
47 ;; `highlight-changes-rotate-faces'. This rotates different through a series | |
48 ;; of different faces, so you can distinguish "new" changes from "older" | |
23046 | 49 ;; changes. You can customize these "rotated" faces in two ways. You can |
22957 | 50 ;; either explicitly define each face by customizing |
51 ;; `highlight-changes-face-list'. If, however, the faces differ from | |
52 ;; `highlight-changes-face' only in the foreground colour, you can simply set | |
53 ;; `highlight-changes-colours'. If `highlight-changes-face-list' is nil when | |
54 ;; the faces are required they will be constructed from | |
55 ;; `highlight-changes-colours'. | |
56 ;; | |
57 ;; | |
58 ;; When a Highlight Changes mode is on (either active or passive) you can go | |
59 ;; to the next or previous change with `highlight-changes-next-change' and | |
60 ;; `highlight-changes-previous-change'. | |
61 ;; | |
62 ;; | |
23289 | 63 ;; You can also use the command highlight-compare-with-file to show changes |
64 ;; in this file compared with another file (typically the previous version | |
65 ;; of the file). | |
22957 | 66 ;; |
67 ;; | |
68 ;; There are currently three hooks run by `highlight-changes-mode': | |
69 ;; `highlight-changes-enable-hook' - is run when Highlight Changes mode | |
70 ;; is initially enabled for a buffer. | |
71 ;; `highlight-changes-disable-hook' - is run when Highlight Changes mode | |
72 ;; is turned off. | |
73 ;; `highlight-changes-toggle-hook' - is run each time `highlight-changes-mode' | |
74 ;; is called. Typically this is when | |
75 ;; toggling between active and passive | |
76 ;; modes. The variable | |
77 ;; `highlight-changes-mode' contains the new | |
78 ;; state (`active' or `passive'.) | |
79 ;; | |
80 ;; | |
81 ;; | |
82 ;; Example usage: | |
83 ;; (defun my-highlight-changes-enable-hook () | |
84 ;; (add-hook 'local-write-file-hooks 'highlight-changes-rotate-faces) | |
85 ;; ) | |
86 ;; | |
87 ;; (defun my-highlight-changes-disable-hook () | |
88 ;; (remove-hook 'local-write-file-hooks 'highlight-changes-rotate-faces) | |
89 ;; ) | |
90 ;; | |
91 ;; (add-hook 'highlight-changes-enable-hook 'my-highlight-changes-enable-hook) | |
92 ;; (add-hook 'highlight-changes-disable-hook | |
93 ;; 'my-highlight-changes-disable-hook) | |
94 | |
95 | |
96 ;; Explciit vs. Implicit | |
97 ;; | |
98 | |
99 ;; Normally, Highlight Changes mode is turned on explicitly in a buffer. | |
100 ;; | |
101 ;; If you prefer to have it automatically invoked you can do it as | |
102 ;; follows. | |
103 ;; | |
104 ;; 1. Most modes have a major-hook, typically called MODE-hook. You | |
105 ;; can use `add-hook' to call `highlight-changes-mode'. | |
106 ;; | |
107 ;; Example: | |
108 ;; (add-hook 'c-mode-hook 'highlight-changes-mode) | |
109 ;; | |
110 ;; If you want to make it start up in passive mode (regardless of the | |
111 ;; setting of highlight-changes-initial-state): | |
112 ;; (add-hook 'emacs-lisp-mode-hook | |
113 ;; (lambda () | |
114 ;; (highlight-changes-mode 'passive))) | |
115 ;; | |
116 ;; However, this cannot be done for Fundamental mode for there is no | |
117 ;; such hook. | |
118 ;; | |
119 ;; 2. You can use the function `global-highlight-changes' | |
120 ;; | |
121 ;; This function, which is fashioned after the way `global-font-lock' works, | |
122 ;; toggles on or off global Highlight Changes mode. When activated, it turns | |
123 ;; on Highlight Changes mode in all "suitable" existings buffers and will turn | |
124 ;; it on in new "suitable" buffers to be created. | |
125 ;; | |
126 ;; A buffer's "suitability" is determined by variable | |
127 ;; `highlight-changes-global-modes', as follows. If the variable is | |
128 ;; * nil -- then no buffers are suitable; | |
129 ;; * a function -- this function is called and the result is used. As | |
130 ;; an example, if the value is 'buffer-file-name then all buffers | |
131 ;; who are visiting files are suitable, but others (like dired | |
132 ;; buffers) are not; | |
133 ;; * a list -- then if the buufer is suitable iff its mode is in the | |
134 ;; list, exccept if the first element is nil in which case the test | |
135 ;; is reversed (i.e. it is a list of unsuitable modes). | |
136 ;; * Otherwise, the buffer is suitable if its name does not begin with | |
137 ;; ` ' or `*' and if `buffer-file-name' returns true. | |
138 ;; | |
139 | |
140 | |
141 | |
142 ;; Possible bindings: | |
143 ;; (global-set-key '[C-right] 'highlight-changes-next-change) | |
144 ;; (global-set-key '[C-left] 'highlight-changes-previous-change) | |
145 ;; | |
146 ;; Other interactive functions (which could be bound if desired): | |
147 ;; highlight-changes-mode | |
148 ;; highlight-changes-remove-highlight | |
149 ;; highlight-changes-rotate-faces | |
23289 | 150 ;; highlight-compare-with-file |
22957 | 151 |
152 ;; | |
153 ;; You can automatically rotate faces when the buffer is saved; | |
154 ;; see function `highlight-changes-rotate-faces' for how to do this. | |
155 ;; | |
156 | |
157 | |
158 ;;; Bugs: | |
159 | |
160 ;; - the next-change and previous-change functions are too literal; | |
161 ;; they should find the next "real" change, in other words treat | |
162 ;; consecutive changes as one. | |
163 | |
164 | |
165 ;;; To do (maybe), notes, ... | |
166 | |
167 ;; - having different faces for deletion and non-deletion: is it | |
168 ;; really worth the hassle? | |
169 ;; - should have better hooks: when should they be run? | |
23289 | 170 ;; - highlight-compare-with-file should allow RCS files - e.g. nice to be |
171 ;; able to say show changes compared with version 2.1. | |
22957 | 172 ;; - Maybe we should have compare-with-buffer as well. (When I tried |
173 ;; a while back I ran into a problem with ediff-buffers-internal.) | |
174 | |
175 | |
176 ;;; History: | |
177 | |
178 ;; R Sharman (rsharman@magma.ca) Feb 1998: | |
179 ;; - initial release as change-mode. | |
180 ;; Jari Aalto <jari.aalto@ntc.nokia.com> Mar 1998 | |
181 ;; - fixes for byte compile errors | |
182 ;; - use eval-and-compile for autoload | |
183 ;; Marijn Ros <J.M.Ros@fys.ruu.nl> Mar 98 | |
184 ;; - suggested turning it on by default | |
185 ;; Eric Ludlam <zappo@gnu.org> Suggested using overlays. | |
186 ;; July 98 | |
187 ;; - global mode and various stuff added | |
188 ;; - Changed to use overlays | |
189 ;; August 98 | |
190 ;; - renmaed to Highlight Changes mode. | |
191 | |
192 | |
193 ;;; Code: | |
194 | |
195 (require 'wid-edit) | |
196 | |
197 ;; ====================== Customization ======================= | |
198 (defgroup highlight-changes nil | |
199 "Highlight Changes mode." | |
200 :group 'faces) | |
201 | |
202 | |
203 ;; Face information: How the changes appear. | |
204 | |
205 ;; Defaults for face: red foreground, no change to background, | |
206 ;; and underlined if a change is because of a deletion. | |
207 ;; Note: underlining is helpful in that is shows up changes in white space. | |
208 ;; However, having it set for non-delete changes can be annoying because all | |
209 ;; indentation on inserts gets underlined (which can look pretty ugly!). | |
210 | |
211 (defface highlight-changes-face | |
212 '((((class color)) (:foreground "red" )) | |
213 (t (:inverse-video t))) | |
214 "Face used for highlighting changes." | |
215 :group 'highlight-changes | |
216 ) | |
217 | |
218 ;; This looks pretty ugly, actually. Maybe the underline should be removed. | |
219 (defface highlight-changes-delete-face | |
220 '((((class color)) (:foreground "red" :underline t)) | |
221 (t (:inverse-video t))) | |
222 "Face used for highlighting deletions." | |
223 :group 'highlight-changes | |
224 ) | |
225 | |
226 | |
227 | |
228 ;; A (not very good) default list of colours to rotate through. | |
229 ;; | |
230 (defcustom highlight-changes-colours | |
231 (if (eq (frame-parameter nil 'background-mode) 'light) | |
232 ;; defaults for light background: | |
233 '( "magenta" "blue" "darkgreen" "chocolate" "sienna4" "NavyBlue") | |
234 ;; defaults for dark background: | |
235 '("yellow" "magenta" "blue" "maroon" "firebrick" "green4" "DarkOrchid")) | |
236 "*Colours used by `highlight-changes-rotate-faces'. | |
237 The newest rotated change will be displayed in the first element of this list, | |
238 the next older will be in the second element etc. | |
239 | |
240 This list is used if `highlight-changes-face-list' is nil, otherwise that | |
241 variable overrides this list. If you only care about foreground | |
242 colours then use this, if you want fancier faces then set | |
243 `highlight-changes-face-list'." | |
244 :type '(repeat color) | |
245 :group 'highlight-changes | |
246 ) | |
247 | |
248 | |
249 ;; If you invoke highlight-changes-mode with no argument, should it start in | |
250 ;; active or passive mode? | |
251 ;; | |
252 (defcustom highlight-changes-initial-state 'active | |
253 "*What state (active or passive) `highlight-changes' should start in. | |
254 This is used when `highlight-changes' is called with no argument. | |
255 This variable must be set to one of the symbols `active' or `passive'." | |
256 :type '(choice (const :tag "Active" active) | |
257 (const :tag "Passive" passive)) | |
258 :group 'highlight-changes | |
259 ) | |
260 | |
261 (defcustom highlight-changes-global-initial-state 'passive | |
262 "*What state `global-highlight-changes' should start in. | |
263 This is used if `global-highlight-changes' is called with no argument. | |
264 This variable must be set to either `active' or `passive'" | |
265 :type '(choice (const :tag "Active" active) | |
266 (const :tag "Passive" passive)) | |
267 :group 'highlight-changes | |
268 ) | |
269 | |
270 ;; The strings displayed in the mode-line for the minor mode: | |
271 (defcustom highlight-changes-active-string nil | |
272 "*The string used when Highlight Changes mode is in the active state. | |
273 This should be set to nil if no indication is desired, or to | |
274 a string with a leading space." | |
275 :type '(choice string | |
276 (const :tag "None" nil)) | |
277 :group 'highlight-changes | |
278 ) | |
279 | |
280 (defcustom highlight-changes-passive-string " Chg" | |
281 "*The string used when Highlight Changes mode is in the passive state. | |
282 This should be set to nil if no indication is desired, or to | |
283 a string with a leading space." | |
284 :type '(choice string | |
285 (const :tag "None" nil)) | |
286 :group 'highlight-changes | |
287 ) | |
288 | |
289 (defcustom highlight-changes-global-modes t | |
290 "*Determine whether a buffer is suitable for global Highlight Changes mode. | |
291 | |
292 A function means that function is called: if it returns non-nil the | |
293 buffer is suitable. | |
294 | |
295 A list is a list of modes for which it is suitable, or a list whose | |
296 first element is 'not followed by modes which are not suitable. | |
297 | |
298 t means the buffer is suitable if its name does not begin with ` ' nor | |
299 `*' and the buffer has a filename. | |
300 | |
301 nil means no buffers are suitable for `global-highlight-changes' | |
302 (effectively disabling the mode). | |
303 | |
304 Examples: | |
305 (c-mode c++-mode) | |
306 means that Highlight Changes mode is turned on for buffers in C and C++ | |
307 modes only." | |
308 :type '(choice | |
309 (const :tag "all non-special buffers visiting files" t) | |
310 (set :menu-tag "specific modes" :tag "modes" | |
311 :value (not) | |
312 (const :tag "All except these" not) | |
313 (repeat :tag "Modes" :inline t (symbol :tag "mode"))) | |
314 (function :menu-tag "determined by function" | |
315 :value buffer-file-name) | |
316 (const :tag "none" nil) | |
317 ) | |
318 :group 'highlight-changes | |
319 ) | |
320 | |
321 | |
322 (defvar global-highlight-changes nil) | |
323 | |
324 (defcustom highlight-changes-global-changes-existing-buffers nil | |
325 "*If non-nil toggling global Highlight Changes mode affects existing buffers. | |
326 Normally, `global-highlight-changes' means affects only new buffers (to be | |
327 created). However, if highlight-changes-global-changes-existing-buffers | |
328 is non-nil then turning on `global-highlight-changes' will turn on | |
329 highlight-changes-mode in suitable buffers and turning the mode off will | |
330 remove it from existing buffers." | |
331 :type 'boolean | |
332 :group 'highlight-changes) | |
333 | |
334 (defun hilit-chg-cust-fix-changes-face-list (w wc &optional event) | |
335 ;; When customization function `highlight-changes-face-list' inserts a new | |
336 ;; face it uses the default face. We don't want the user to modify this | |
337 ;; face, so we rename the faces in the list on an insert. The rename is | |
338 ;; actually done by copying the faces so user-defined faces still remain | |
339 ;; in the same order. | |
340 ;; The notifying the parent is needed because without it changes to the | |
341 ;; faces are saved but not to the actual list itself. | |
342 (let ((old-list (widget-value w))) | |
343 (if (member 'default old-list) | |
344 (let | |
345 ((p (reverse old-list)) | |
346 (n (length old-list)) | |
347 new-name old-name | |
348 (new-list nil) | |
349 ) | |
350 (while p | |
351 (setq old-name (car p)) | |
352 (setq new-name (intern (format "highlight-changes-face-%d" n))) | |
353 (if (eq old-name new-name) | |
354 nil | |
355 ;; A new face has been inserted: we don't want to modify the | |
356 ;; default face so copy it. Better, though, (I think) is to | |
357 ;; make a new face have the same attributes as | |
358 ;; highlight-changes-face . | |
359 (if (eq old-name 'default) | |
360 (copy-face 'highlight-changes-face new-name) | |
361 (copy-face old-name new-name) | |
362 )) | |
363 (setq new-list (append (list new-name) new-list)) | |
364 (setq n (1- n)) | |
365 (setq p (cdr p))) | |
366 (if (equal new-list (widget-value w)) | |
367 nil ;; (message "notify: no change!") | |
368 (widget-value-set w new-list) | |
369 (widget-setup) | |
370 ) | |
371 ) | |
372 ;; (message "notify: no default here!") | |
373 )) | |
374 (let ((parent (widget-get w :parent))) | |
375 (when parent | |
376 (widget-apply parent :notify w event))) | |
377 ) | |
378 | |
379 | |
380 (defcustom highlight-changes-face-list nil | |
381 "*A list of faces used when rotatating changes. | |
382 Normally the variable is initialized to nil and the list is created from | |
383 `highlight-changes-colours' when needed. However, you can set this variable | |
384 to any list of faces. You will have to do this if you want faces which | |
385 don't just differ from `highlight-changes-face' by the foreground colour. | |
386 Otherwise, this list will be constructed when needed from | |
387 `highlight-changes-colours'." | |
388 :type '(choice | |
389 (repeat | |
390 :notify hilit-chg-cust-fix-changes-face-list | |
391 face ) | |
392 (const :tag "Derive from highlight-changes-colours" nil) | |
393 ) | |
394 :group 'highlight-changes | |
395 ) | |
396 | |
397 ;; ======================================================================== | |
398 | |
399 ;; These shouldn't be changed! | |
400 | |
401 (defvar highlight-changes-mode nil) | |
402 (defvar hilit-chg-list nil) | |
403 (defvar hilit-chg-string " ??") | |
404 (or (assq 'highlight-changes-mode minor-mode-alist) | |
405 (setq minor-mode-alist | |
406 (cons '(highlight-changes-mode hilit-chg-string) minor-mode-alist) | |
407 )) | |
408 (make-variable-buffer-local 'highlight-changes-mode) | |
409 (make-variable-buffer-local 'hilit-chg-string) | |
410 | |
411 | |
412 | |
413 (eval-and-compile | |
23289 | 414 ;; For highlight-compare-with-file |
22957 | 415 (defvar ediff-number-of-differences) |
416 (autoload 'ediff-setup "ediff") | |
417 (autoload 'ediff-with-current-buffer "ediff") | |
418 (autoload 'ediff-really-quit "ediff") | |
419 (autoload 'ediff-make-fine-diffs "ediff") | |
420 (autoload 'ediff-get-fine-diff-vector "ediff") | |
421 (autoload 'ediff-get-difference "ediff") | |
422 ) | |
423 | |
424 | |
425 | |
426 ;;; Functions... | |
427 | |
428 (defun hilit-chg-map-changes (func &optional start-position end-position) | |
429 "Call function FUNC for each region used by Highlight Changes mode." | |
430 ;; if start-position is nil, (point-min) is used | |
431 ;; if end-position is nil, (point-max) is used | |
432 ;; FUNC is called with 3 params: property start stop | |
433 (let ((start (or start-position (point-min))) | |
434 (limit (or end-position (point-max))) | |
435 prop end) | |
436 (while (and start (< start limit)) | |
437 (setq prop (get-text-property start 'hilit-chg)) | |
438 (setq end (text-property-not-all start limit 'hilit-chg prop)) | |
439 (if prop | |
440 (funcall func prop start (or end limit))) | |
441 (setq start end) | |
442 ))) | |
443 | |
444 | |
445 (defun hilit-chg-display-changes (&optional beg end) | |
446 "Display face information for Highlight Changes mode. | |
447 | |
448 An overlay containing a change face is added, from the information | |
449 in the text property of type change. | |
450 | |
451 This is the opposite of hilit-chg-hide-changes." | |
452 (hilit-chg-map-changes 'hilit-chg-make-ov beg end)) | |
453 | |
454 | |
455 (defun hilit-chg-make-ov (prop start end) | |
456 ;; for the region make change overlays corresponding to | |
457 ;; the text property 'hilit-chg | |
458 (let ((ov (make-overlay start end)) | |
459 face) | |
460 (or prop | |
461 (error "hilit-chg-make-ov: prop is nil")) | |
462 (if (eq prop 'hilit-chg-delete) | |
463 (setq face 'highlight-changes-delete-face) | |
464 (setq face (nth 1 (member prop hilit-chg-list)))) | |
465 (if face | |
466 (progn | |
467 ;; We must mark the face, that is the purpose of the overlay | |
468 (overlay-put ov 'face face) | |
469 ;; I don't think we need to set evaporate since we should | |
470 ;; be controlling them! | |
471 (overlay-put ov 'evaporate t) | |
472 ;; We set the change property so we can tell this is one | |
473 ;; of our overlays (so we don't delete someone else's). | |
474 (overlay-put ov 'hilit-chg t) | |
475 ) | |
476 (error "hilit-chg-make-ov: no face for prop: %s" prop) | |
477 ) | |
478 )) | |
479 | |
480 (defun hilit-chg-hide-changes (&optional beg end) | |
481 "Remove face information for Highlight Changes mode. | |
482 | |
483 The overlay containing the face is removed, but the text property | |
484 containing the change information is retained. | |
485 | |
486 This is the opposite of hilit-chg-display-changes." | |
487 (let ((start (or beg (point-min))) | |
488 (limit (or end (point-max))) | |
489 p ov) | |
490 (setq p (overlays-in start limit)) | |
491 (while p | |
492 ;; don't delete the overlay if it isn't ours! | |
493 (if (overlay-get (car p) 'hilit-chg) | |
494 (delete-overlay (car p))) | |
495 (setq p (cdr p)) | |
496 ))) | |
497 | |
498 (defun hilit-chg-fixup (beg end) | |
499 "Fix change overlays in region beg .. end. | |
500 | |
501 Ensure the overlays agree with the changes as determined from | |
502 the text properties of type `hilit-chg' ." | |
503 ;; Remove or alter overlays in region beg..end | |
504 (let (p ov ov-start ov-end | |
505 props q) | |
506 (setq p (overlays-in beg end)) | |
507 ;; temp for debugging: | |
508 ;; (or (eq highlight-changes-mode 'active) | |
509 ;; (error "hilit-chg-fixup called but Highlight Changes mode not active")) | |
510 (while p | |
511 (setq ov (car p)) | |
512 (setq ov-start (overlay-start ov)) | |
513 (setq ov-end (overlay-end ov)) | |
514 (if (< ov-start beg) | |
515 (progn | |
516 (move-overlay ov ov-start beg) | |
517 (if (> ov-end end) | |
518 (progn | |
519 (setq props (overlay-properties ov)) | |
520 (setq ov (make-overlay end ov-end)) | |
521 (while props | |
522 (overlay-put ov (car props)(car (cdr props))) | |
523 (setq props (cdr (cdr props)))) | |
524 ) | |
525 ) | |
526 ) | |
527 (if (> ov-end end) | |
528 (move-overlay ov end ov-end) | |
529 (delete-overlay ov) | |
530 )) | |
531 (setq p (cdr p))) | |
532 (hilit-chg-display-changes beg end) | |
533 )) | |
534 | |
535 | |
536 | |
537 | |
538 | |
539 | |
540 ;;;###autoload | |
541 (defun highlight-changes-remove-highlight (beg end) | |
542 "Remove the change face from the region. | |
543 This allows you to manually remove highlighting from uninteresting changes." | |
544 (interactive "r") | |
545 (let ((after-change-functions nil)) | |
546 (remove-text-properties beg end '(hilit-chg nil)) | |
547 (hilit-chg-fixup beg end))) | |
548 | |
549 (defun hilit-chg-set-face-on-change (beg end leng-before | |
550 &optional no-proerty-change) | |
551 "Record changes and optionally display them in a distinctive face. | |
552 `hilit-chg-set' adds this function to the `after-change-functions' hook." | |
553 ;; | |
554 ;; This function is called by the `after-change-functions' hook, which | |
555 ;; is how we are notified when text is changed. | |
23289 | 556 ;; It is also called from `highlight-compare-with-file'. |
22957 | 557 ;; |
558 ;; We do NOT want to simply do this if this is an undo command, because | |
559 ;; otherwise an undone change shows up as changed. While the properties | |
560 ;; are automatically restored by undo, we must fixup the overlay. | |
561 (save-match-data | |
562 (let ((beg-decr 1) (end-incr 1) | |
563 (type 'hilit-chg) | |
564 old) | |
565 (if undo-in-progress | |
566 (if (eq highlight-changes-mode 'active) | |
567 (hilit-chg-fixup beg end)) | |
568 (if (and (= beg end) (> leng-before 0)) | |
569 ;; deletion | |
570 (progn | |
571 ;; The eolp and bolp tests are a kludge! But they prevent | |
572 ;; rather nasty looking displays when deleting text at the end | |
573 ;; of line, such as normal corrections as one is typing and | |
574 ;; immediately makes a corrections, and when deleting first | |
575 ;; character of a line. | |
576 ;;; (if (= leng-before 1) | |
577 ;;; (if (eolp) | |
578 ;;; (setq beg-decr 0 end-incr 0) | |
579 ;;; (if (bolp) | |
580 ;;; (setq beg-decr 0)))) | |
581 ;;; (setq beg (max (- beg beg-decr) (point-min))) | |
582 (setq end (min (+ end end-incr) (point-max))) | |
583 (setq type 'hilit-chg-delete)) | |
584 ;; Not a deletion. | |
585 ;; Most of the time the following is not necessary, but | |
586 ;; if the current text was marked as a deletion then | |
587 ;; the old overlay is still in effect, so if we add some | |
588 ;; text then remove the deletion marking, but set it to | |
589 ;; changed otherwise its highlighting disappears. | |
590 (if (eq (get-text-property end 'hilit-chg) 'hilit-chg-delete) | |
591 (progn | |
592 (remove-text-properties end (+ end 1) '(hilit-chg nil)) | |
593 (put-text-property end (+ end 1) 'hilit-chg 'hilit-chg) | |
594 (if (eq highlight-changes-mode 'active) | |
595 (hilit-chg-fixup beg (+ end 1)))))) | |
596 (unless no-proerty-change | |
597 (put-text-property beg end 'hilit-chg type)) | |
598 (if (or (eq highlight-changes-mode 'active) no-proerty-change) | |
599 (hilit-chg-make-ov type beg end)) | |
600 )))) | |
601 | |
602 | |
603 | |
604 | |
605 | |
606 (defun hilit-chg-set (value) | |
607 "Turn on Highlight Changes mode for this buffer." | |
608 (setq highlight-changes-mode value) | |
609 (remove-hook 'after-change-functions 'hilit-chg-set-face-on-change t) | |
610 (hilit-chg-make-list) | |
611 (if (eq highlight-changes-mode 'active) | |
612 (progn | |
613 (setq hilit-chg-string highlight-changes-active-string) | |
614 (or buffer-read-only | |
615 (hilit-chg-display-changes))) | |
616 ;; mode is passive | |
617 (setq hilit-chg-string highlight-changes-passive-string) | |
618 (or buffer-read-only | |
619 (hilit-chg-hide-changes)) | |
620 ) | |
621 (force-mode-line-update) | |
622 (make-local-hook 'after-change-functions) | |
623 (add-hook 'after-change-functions 'hilit-chg-set-face-on-change nil t) | |
624 ) | |
625 | |
626 (defun hilit-chg-clear () | |
627 "Remove Highlight Changes mode for this buffer. | |
628 This removes all saved change information." | |
629 (if buffer-read-only | |
630 ;; We print the buffer name because this function could be called | |
631 ;; on many buffers from `global-highlight-changes'. | |
632 (message "Cannot remove highlighting from read-only mode buffer %s" | |
633 (buffer-name)) | |
634 (remove-hook 'after-change-functions 'hilit-chg-set-face-on-change t) | |
635 (let ((after-change-functions nil)) | |
636 (hilit-chg-hide-changes) | |
637 (hilit-chg-map-changes | |
638 '(lambda (prop start stop) | |
639 (remove-text-properties start stop '(hilit-chg nil)))) | |
640 ) | |
641 (setq highlight-changes-mode nil) | |
642 (force-mode-line-update) | |
643 ;; If we type: C-u -1 M-x highlight-changes-mode | |
644 ;; we want to turn it off, but hilit-chg-post-command-hook | |
645 ;; runs and that turns it back on! | |
646 (remove-hook 'post-command-hook 'hilit-chg-post-command-hook) | |
647 )) | |
648 | |
649 ;;;###autoload | |
650 (defun highlight-changes-mode (&optional arg) | |
651 "Toggle (or initially set) Highlight Changes mode. | |
652 | |
653 Without an argument, | |
654 if Highlight Changes mode is not enabled, then enable it (to either active | |
655 or passive as determined by variable highlight-changes-initial-state); | |
656 otherwise, toggle between active and passive states. | |
657 | |
658 With an argument, | |
659 if just C-u or a positive argument, set state to active; | |
660 with a zero argument, set state to passive; | |
661 with a negative argument, disable Highlight Changes mode completely. | |
662 | |
663 Active state - means changes are shown in a distinctive face. | |
664 Passive state - means changes are kept and new ones recorded but are | |
665 not displayed in a different face. | |
666 | |
667 Functions: | |
668 \\[highlight-changes-next-change] - move point to beginning of next change | |
669 \\[highlight-changes-previous-change] - move to beginning of previous change | |
23289 | 670 \\[highlight-compare-with-file] - mark text as changed by comparing this |
671 buffer with the contents of a file | |
22957 | 672 \\[highlight-changes-remove-highlight] - remove the change face from the region |
673 \\[highlight-changes-rotate-faces] - rotate different \"ages\" of changes \ | |
674 through | |
675 various faces. | |
676 | |
677 | |
678 Hook variables: | |
679 highlight-changes-enable-hook - when Highlight Changes mode enabled. | |
680 highlight-changes-toggle-hook - when entering active or passive state | |
681 highlight-changes-disable-hook - when turning off Highlight Changes mode. | |
682 " | |
683 (interactive "P") | |
684 (if window-system | |
685 (let ((was-on highlight-changes-mode) | |
686 (new-highlight-changes-mode | |
687 (cond | |
688 ((null arg) | |
689 ;; no arg => toggle (or set to active initially) | |
690 (if highlight-changes-mode | |
691 (if (eq highlight-changes-mode 'active) 'passive 'active) | |
692 highlight-changes-initial-state)) | |
693 ;; an argument is given | |
694 ((eq arg 'active) | |
695 'active) | |
696 ((eq arg 'passive) | |
697 'passive) | |
698 ((> (prefix-numeric-value arg) 0) | |
699 'active) | |
700 ((< (prefix-numeric-value arg) 0) | |
701 nil) | |
702 (t | |
703 'passive) | |
704 ))) | |
705 (if new-highlight-changes-mode | |
706 ;; mode is turned on -- but may be passive | |
707 (progn | |
708 (hilit-chg-set new-highlight-changes-mode) | |
709 (or was-on | |
710 ;; run highlight-changes-enable-hook once | |
711 (run-hooks 'highlight-changes-enable-hook)) | |
712 (run-hooks 'highlight-changes-toggle-hook)) | |
713 ;; mode is turned off | |
714 (run-hooks 'highlight-changes-disable-hook) | |
715 (hilit-chg-clear)) | |
716 ) | |
717 (message "Highlight Changes mode only works when using a window system")) | |
718 ) | |
719 | |
720 | |
721 | |
722 ;;;###autoload | |
723 (defun highlight-changes-next-change () | |
724 "Move to the beginning of the next change, if in Highlight Changes mode." | |
725 (interactive) | |
726 (if highlight-changes-mode | |
727 (let ((start (point)) | |
728 prop) | |
729 (setq prop (get-text-property (point) 'hilit-chg)) | |
730 (if prop | |
731 ;; we are in a change | |
732 (setq start (next-single-property-change (point) 'hilit-chg))) | |
733 (if start | |
734 (setq start (next-single-property-change start 'hilit-chg))) | |
735 (if start | |
736 (goto-char start) | |
737 (message "no next change"))) | |
738 (message "This buffer is not in Highlight Changes mode."))) | |
739 | |
740 | |
741 ;;;###autoload | |
742 (defun highlight-changes-previous-change () | |
743 "Move to the beginning of the previous change, if in Highlight Changes mode." | |
744 (interactive) | |
745 (if highlight-changes-mode | |
746 (let ( (start (point)) (prop nil) ) | |
747 (or (bobp) | |
748 (setq prop (get-text-property (1- (point)) 'hilit-chg))) | |
749 (if prop | |
750 ;; we are in a change | |
751 (setq start (previous-single-property-change (point) 'hilit-chg))) | |
752 (if start | |
753 (setq start (previous-single-property-change start 'hilit-chg))) | |
754 ;; special handling for the case where (point-min) is a change | |
755 (if start | |
756 (setq start (or (previous-single-property-change start 'hilit-chg) | |
757 (if (get-text-property (point-min) 'hilit-chg) | |
758 (point-min))))) | |
759 (if start | |
760 (goto-char start) | |
761 (message "no previous change"))) | |
762 (message "This buffer is not in Highlight Changes mode."))) | |
763 | |
764 | |
765 ;; ======================================================================== | |
766 | |
767 | |
768 (defun hilit-chg-make-list (&optional force) | |
769 "Construct hilit-chg-list and highlight-changes-face-list." | |
770 ;; Constructs highlight-changes-face-list if necessary, | |
771 ;; and hilit-chg-list always: | |
772 ;; Maybe this should always be called when rotating a face | |
773 ;; so we pick up any changes? | |
774 (if (or (null highlight-changes-face-list) ; Don't do it if it | |
775 force) ; already exists unless FORCE non-nil. | |
776 (let ((p highlight-changes-colours) | |
777 (n 1) name) | |
778 (setq highlight-changes-face-list nil) | |
779 (while p | |
780 (setq name (intern (format "highlight-changes-face-%d" n))) | |
781 (copy-face 'highlight-changes-face name) | |
782 (set-face-foreground name (car p)) | |
783 (setq highlight-changes-face-list | |
784 (append highlight-changes-face-list (list name))) | |
785 (setq p (cdr p)) | |
786 (setq n (1+ n))))) | |
787 (setq hilit-chg-list (list 'hilit-chg 'highlight-changes-face)) | |
788 (let ((p highlight-changes-face-list) | |
789 (n 1) | |
790 last-category last-face) | |
791 (while p | |
792 (setq last-category (intern (format "change-%d" n))) | |
793 ;; (setq last-face (intern (format "highlight-changes-face-%d" n))) | |
794 (setq last-face (car p)) | |
795 (setq hilit-chg-list | |
796 (append hilit-chg-list | |
797 (list last-category last-face))) | |
798 (setq p (cdr p)) | |
799 (setq n (1+ n))) | |
800 (setq hilit-chg-list | |
801 (append hilit-chg-list | |
802 (list last-category last-face))) | |
803 )) | |
804 | |
805 | |
806 (defun hilit-chg-bump-change (prop start end) | |
807 "Increment (age) the Highlight Changes mode text property of type change." | |
808 (let ( new-prop ) | |
809 (if (eq prop 'hilit-chg-delete) | |
810 (setq new-prop (nth 2 hilit-chg-list)) | |
811 (setq new-prop (nth 2 (member prop hilit-chg-list))) | |
812 ) | |
813 (if prop | |
814 (put-text-property start end 'hilit-chg new-prop) | |
815 (message "%d-%d unknown property %s not changed" start end prop) | |
816 ) | |
817 )) | |
818 | |
819 ;;;###autoload | |
820 (defun highlight-changes-rotate-faces () | |
821 "Rotate the faces used by Highlight Changes mode. | |
822 | |
823 Current changes will be display in the face described by the first element | |
824 of highlight-changes-face-list, those (older) changes will be shown in the | |
825 face described by the second element, and so on. Very old changes remain | |
826 shown in the last face in the list. | |
827 | |
828 You can automatically rotate colours when the buffer is saved | |
829 by adding this to local-write-file-hooks, by evaling (in the | |
830 buffer to be saved): | |
831 (add-hook 'local-write-file-hooks 'highlight-changes-rotate-faces) | |
832 " | |
833 (interactive) | |
834 ;; If not in active mode do nothing but don't complain because this | |
835 ;; may be bound to a hook. | |
836 (if (eq highlight-changes-mode 'active) | |
837 (let ((after-change-functions nil)) | |
838 ;; ensure hilit-chg-list is made and up to date | |
839 (hilit-chg-make-list) | |
840 ;; remove our existing overlays | |
841 (hilit-chg-hide-changes) | |
842 ;; for each change text property, increment it | |
843 (hilit-chg-map-changes 'hilit-chg-bump-change) | |
844 ;; and display them all if active | |
845 (if (eq highlight-changes-mode 'active) | |
846 (hilit-chg-display-changes)) | |
847 )) | |
848 ;; This always returns nil so it is safe to use in | |
849 ;; local-write-file-hook | |
850 nil) | |
851 | |
852 | |
853 ;; ======================================================================== | |
854 ;; Comparing with an existing file. | |
855 ;; This uses ediff to find the differences. | |
856 | |
857 ;;;###autoload | |
23288
17dd9ecf84f1
(highlight-compare-with-file): Renamed from
Karl Heuer <kwzh@gnu.org>
parents:
23101
diff
changeset
|
858 (defun highlight-compare-with-file (file-b) |
17dd9ecf84f1
(highlight-compare-with-file): Renamed from
Karl Heuer <kwzh@gnu.org>
parents:
23101
diff
changeset
|
859 "Compare this buffer with a file, and highlight differences. |
22957 | 860 |
861 The current buffer must be an unmodified buffer visiting a file, | |
862 and not in read-only mode. | |
863 | |
864 If the backup filename exists, it is used as the default | |
865 when called interactively. | |
866 | |
867 If a buffer is visiting the file being compared against, it also will | |
868 have its differences highlighted. Otherwise, the file is read in | |
869 temporarily but the buffer is deleted. | |
870 | |
871 If a buffer is read-only, differences will be highlighted but no property | |
872 changes made, so \\[highlight-changes-next-change] and | |
873 \\[highlight-changes-previous-change] will not work." | |
874 (interactive (list | |
875 (read-file-name | |
876 "File to compare with? " ;; prompt | |
877 "" ;; directory | |
878 nil ;; default | |
879 'yes ;; must exist | |
880 (let ((f (make-backup-file-name | |
881 (or (buffer-file-name (current-buffer)) | |
882 (error "no file for this buffer"))))) | |
883 (if (file-exists-p f) f "")) | |
884 ))) | |
885 | |
886 (let* ((buf-a (current-buffer)) | |
887 (buf-a-read-only buffer-read-only) | |
888 (orig-pos (point)) | |
889 (file-a (buffer-file-name)) | |
890 (existing-buf (get-file-buffer file-b)) | |
891 (buf-b (or existing-buf | |
892 (find-file-noselect file-b))) | |
893 (buf-b-read-only (with-current-buffer buf-b buffer-read-only)) | |
894 xy xx yy p q | |
895 a-start a-end len-a | |
896 b-start b-end len-b | |
897 ) | |
898 | |
899 ;; We use the fact that the buffer is not marked modified at the | |
900 ;; end where we clear its modified status | |
901 (if (buffer-modified-p buf-a) | |
902 (if (y-or-n-p (format "OK to save %s? " file-a)) | |
903 (save-buffer buf-a) | |
904 (error "Buffer must be saved before comparing with a file."))) | |
905 (if (and existing-buf (buffer-modified-p buf-b)) | |
906 (if (y-or-n-p (format "OK to save %s? " file-b)) | |
907 (save-buffer buf-b) | |
908 (error "Cannot compare with a file in an unsaved buffer."))) | |
909 (highlight-changes-mode 'active) | |
910 (if existing-buf (with-current-buffer buf-b | |
911 (highlight-changes-mode 'active))) | |
912 (save-window-excursion | |
913 (setq xy (hilit-chg-get-diff-info buf-a file-a buf-b file-b))) | |
914 (setq xx (car xy)) | |
915 (setq p xx) | |
916 (setq yy (car (cdr xy))) | |
917 (setq q yy) | |
918 (hilit-chg-make-list) | |
919 (while p | |
920 (setq a-start (nth 0 (car p))) | |
921 (setq a-end (nth 1 (car p))) | |
922 (setq b-start (nth 0 (car q))) | |
923 (setq b-end (nth 1 (car q))) | |
924 (setq len-a (- a-end a-start)) | |
925 (setq len-b (- b-end b-start)) | |
926 (set-buffer buf-a) | |
927 (hilit-chg-set-face-on-change a-start a-end len-b buf-a-read-only) | |
928 (set-buffer-modified-p nil) | |
929 (goto-char orig-pos) | |
930 (if existing-buf | |
931 (with-current-buffer buf-b | |
932 (hilit-chg-set-face-on-change b-start b-end len-a | |
933 buf-b-read-only ) | |
934 )) | |
935 (setq p (cdr p)) | |
936 (setq q (cdr q)) | |
937 ) | |
938 (if existing-buf | |
939 (set-buffer-modified-p nil) | |
940 (kill-buffer buf-b)) | |
941 )) | |
942 | |
943 | |
944 (defun hilit-chg-get-diff-info (buf-a file-a buf-b file-b) | |
945 (let ((e nil) x y) ;; e is set by function hilit-chg-get-diff-list-hk | |
946 (ediff-setup buf-a file-a buf-b file-b | |
947 nil nil ; buf-c file-C | |
948 'hilit-chg-get-diff-list-hk | |
949 (list (cons 'ediff-job-name 'something)) | |
950 ) | |
951 (ediff-with-current-buffer e (ediff-really-quit nil)) | |
952 (list x y))) | |
953 | |
954 | |
955 (defun hilit-chg-get-diff-list-hk () | |
956 ;; x and y are dynamically bound by hilit-chg-get-diff-info | |
957 ;; which calls this function as a hook | |
958 (defvar x) ;; placate the byte-compiler | |
959 (defvar y) | |
960 (setq e (current-buffer)) | |
961 (let ((n 0) extent p va vb a b) | |
962 (setq x nil y nil) ;; x and y are bound by hilit-chg-get-diff-info | |
963 (while (< n ediff-number-of-differences) | |
964 (ediff-make-fine-diffs n) | |
965 (setq va (ediff-get-fine-diff-vector n 'A)) | |
966 ;; va is a vector if there are fine differences | |
967 (if va | |
968 (setq a (append va nil)) | |
969 ;; if not, get the unrefined difference | |
970 (setq va (ediff-get-difference n 'A)) | |
971 (setq a (list (elt va 0))) | |
972 ) | |
973 ;; a list a list | |
974 (setq p a) | |
975 (while p | |
976 (setq extent (list (overlay-start (car p)) | |
977 (overlay-end (car p)))) | |
978 (setq p (cdr p)) | |
979 (setq x (append x (list extent) )) | |
980 );; while p | |
981 ;; | |
982 (setq vb (ediff-get-fine-diff-vector n 'B)) | |
983 ;; vb is a vector | |
984 (if vb | |
985 (setq b (append vb nil)) | |
986 ;; if not, get the unrefined difference | |
987 (setq vb (ediff-get-difference n 'B)) | |
988 (setq b (list (elt vb 0))) | |
989 ) | |
990 ;; b list a list | |
991 (setq p b) | |
992 (while p | |
993 (setq extent (list (overlay-start (car p)) | |
994 (overlay-end (car p)))) | |
995 (setq p (cdr p)) | |
996 (setq y (append y (list extent) )) | |
997 );; while p | |
998 ;; | |
999 (setq n (1+ n)) | |
1000 );; while | |
1001 ;; ediff-quit doesn't work here. | |
1002 ;; No point in returning a value, since this is a hook function. | |
1003 )) | |
1004 | |
1005 ;; ======================= automatic stuff ============== | |
1006 | |
1007 ;; Global Highlight Changes mode is modelled after Global Font-lock mode. | |
1008 ;; Three hooks are used to gain control. When Global Changes Mode is | |
1009 ;; enabled, `find-file-hooks' and `change-major-mode-hook' are set. | |
1010 ;; `find-file-hooks' is called when visiting a file, the new mode is | |
1011 ;; known at this time. | |
1012 ;; `change-major-mode-hook' is called when a buffer is changing mode. | |
1013 ;; This could be because of finding a file in which case | |
1014 ;; `find-file-hooks' has already been called and has done its work. | |
1015 ;; However, it also catches the case where a new mode is being set by | |
1016 ;; the user. However, it is called from `kill-all-variables' and at | |
1017 ;; this time the mode is the old mode, which is not what we want. | |
1018 ;; So, our function temporarily sets `post-command-hook' which will | |
1019 ;; be called after the buffer has been completely set up (with the new | |
1020 ;; mode). It then removes the `post-command-hook'. | |
1021 ;; One other wrinkle - every M-x command runs the `change-major-mode-hook' | |
1022 ;; so we ignore this by examining the buffer name. | |
1023 | |
1024 | |
1025 (defun hilit-chg-major-mode-hook () | |
1026 (add-hook 'post-command-hook 'hilit-chg-post-command-hook) | |
1027 ) | |
1028 | |
1029 (defun hilit-chg-post-command-hook () | |
1030 ;; This is called after changing a major mode, but also after each | |
1031 ;; M-x command, in which case the current buffer is a minibuffer. | |
1032 ;; In that case, do not act on it here, but don't turn it off | |
1033 ;; either, we will get called here again soon-after. | |
1034 ;; Also, don't enable it for other special buffers. | |
1035 (if (string-match "^[ *]" (buffer-name)) | |
1036 nil ;; (message "ignoring this post-command-hook") | |
1037 (remove-hook 'post-command-hook 'hilit-chg-post-command-hook) | |
1038 ;; The following check isn't necessary, since | |
1039 ;; hilit-chg-turn-on-maybe makes this check too. | |
1040 (or highlight-changes-mode ;; don't turn it on if it already is | |
1041 (hilit-chg-turn-on-maybe highlight-changes-global-initial-state)) | |
1042 )) | |
1043 | |
1044 (defun hilit-chg-check-global () | |
1045 ;; This is called from the find file hook. | |
1046 (hilit-chg-turn-on-maybe highlight-changes-global-initial-state)) | |
1047 | |
1048 | |
1049 | |
1050 ;;;###autoload | |
1051 (defun global-highlight-changes (&optional arg) | |
1052 "Turn on or off global Highlight Changes mode. | |
1053 | |
1054 When called interactively: | |
1055 - if no prefix, toggle global Highlight Changes mode on or off | |
1056 - if called with a positive prefix (or just C-u) turn it on in active mode | |
1057 - if called with a zero prefix turn it on in passive mode | |
1058 - if called with a negative prefix turn it off | |
1059 | |
1060 When called from a program: | |
1061 - if ARG is nil or omitted, turn it off | |
1062 - if ARG is 'active, turn it on in active mode | |
1063 - if ARG is 'passive, turn it on in passive mode | |
1064 - otherwise just turn it on | |
1065 | |
1066 When global Highlight Changes mode is enabled, Highlight Changes mode is turned | |
1067 on for future \"suitable\" buffers (and for \"suitable\" existing buffers if | |
1068 variable `highlight-changes-global-changes-existing-buffers' is non-nil). | |
1069 \"Suitablity\" is determined by variable `highlight-changes-global-modes'." | |
1070 | |
1071 (interactive | |
1072 (list | |
1073 (cond | |
1074 ((null current-prefix-arg) | |
1075 ;; no arg => toggle it on/off | |
1076 (setq global-highlight-changes (not global-highlight-changes))) | |
1077 ;; positive interactive arg - turn it on as active | |
1078 ((> (prefix-numeric-value current-prefix-arg) 0) | |
1079 (setq global-highlight-changes t) | |
1080 'active) | |
1081 ;; zero interactive arg - turn it on as passive | |
1082 ((= (prefix-numeric-value current-prefix-arg) 0) | |
1083 (setq global-highlight-changes t) | |
1084 'passive) | |
1085 ;; negative interactive arg - turn it off | |
1086 (t | |
1087 (setq global-highlight-changes nil) | |
1088 nil)))) | |
1089 | |
1090 (if arg | |
1091 (progn | |
1092 (if (eq arg 'active) | |
1093 (setq highlight-changes-global-initial-state 'active) | |
1094 (if (eq arg 'passive) | |
1095 (setq highlight-changes-global-initial-state 'passive))) | |
1096 (setq global-highlight-changes t) | |
1097 (message "turning ON Global Highlight Changes mode in %s state" | |
1098 highlight-changes-global-initial-state) | |
1099 (add-hook 'hilit-chg-major-mode-hook 'hilit-chg-major-mode-hook) | |
1100 (add-hook 'find-file-hooks 'hilit-chg-check-global) | |
1101 (if highlight-changes-global-changes-existing-buffers | |
1102 (hilit-chg-update-all-buffers | |
1103 highlight-changes-global-initial-state)) | |
1104 ) | |
1105 (message "turning OFF global Highlight Changes mode") | |
1106 (remove-hook 'hilit-chg-major-mode-hook 'hilit-chg-major-mode-hook) | |
1107 (remove-hook 'find-file-hooks 'hilit-chg-check-global) | |
1108 (remove-hook 'post-command-hook | |
1109 'hilit-chg-post-command-hook) | |
1110 (remove-hook 'find-file-hooks 'hilit-chg-check-global) | |
1111 (if highlight-changes-global-changes-existing-buffers | |
1112 (hilit-chg-update-all-buffers nil)) | |
1113 ) | |
1114 ) | |
1115 | |
1116 | |
1117 | |
1118 | |
1119 | |
1120 (defun hilit-chg-turn-on-maybe (value) | |
1121 "Turn on Highlight Changes mode if it is appropriate for this buffer. | |
1122 | |
1123 A buffer is appropriate for Highlight Changes mode if all these are true: | |
1124 - the buffer is not a special buffer (one whose name begins with | |
1125 `*' or ` ') | |
1126 - the buffer's mode is suitable as per variable highlight-changes-global-modes | |
1127 - Highlight Changes mode is not already on for this buffer. | |
1128 | |
1129 This function is called from hilit-chg-update-all-buffers | |
1130 from `global-highlight-changes' when turning on global Highlight Changes mode. | |
1131 " | |
1132 (or highlight-changes-mode ; do nothing if already on | |
1133 (if | |
1134 (cond | |
1135 ((null highlight-changes-global-modes) | |
1136 nil) | |
1137 ((functionp highlight-changes-global-modes) | |
1138 (funcall highlight-changes-global-modes)) | |
1139 ((listp highlight-changes-global-modes) | |
1140 (if (eq (car-safe highlight-changes-global-modes) 'not) | |
1141 (not (memq major-mode (cdr highlight-changes-global-modes))) | |
1142 (memq major-mode highlight-changes-global-modes))) | |
1143 (t | |
1144 (and | |
1145 (not (string-match "^[ *]" (buffer-name))) | |
1146 (buffer-file-name)) | |
1147 )) | |
1148 (progn | |
1149 (hilit-chg-set value) | |
1150 (run-hooks 'highlight-changes-enable-hook))) | |
1151 )) | |
1152 | |
1153 | |
1154 (defun hilit-chg-turn-off-maybe () | |
1155 (if highlight-changes-mode | |
1156 (progn | |
1157 (run-hooks 'highlight-changes-disable-hook) | |
1158 (hilit-chg-clear)))) | |
1159 | |
1160 | |
1161 | |
1162 (defun hilit-chg-update-all-buffers (value) | |
1163 (mapcar | |
1164 (function (lambda (buffer) | |
1165 (with-current-buffer buffer | |
1166 (if value | |
1167 (hilit-chg-turn-on-maybe value) | |
1168 (hilit-chg-turn-off-maybe)) | |
1169 ))) | |
1170 (buffer-list))) | |
1171 | |
1172 ;; ===================== debug ================== | |
1173 ;; For debug & test use: | |
1174 ;; | |
1175 ;; (defun hilit-chg-debug-show (&optional beg end) | |
1176 ;; (interactive) | |
1177 ;; (message "--- hilit-chg-debug-show ---") | |
1178 ;; (hilit-chg-map-changes '(lambda (prop start end) | |
1179 ;; (message "%d-%d: %s" start end prop) | |
1180 ;; ) | |
1181 ;; beg end | |
1182 ;; )) | |
1183 ;; | |
1184 ;; ================== end of debug =============== | |
1185 | |
1186 | |
1187 (provide 'hilit-chg) | |
22958
cd50dfa70bb2
Delete the undo-in-progress compatibility code.
Richard M. Stallman <rms@gnu.org>
parents:
22957
diff
changeset
|
1188 |
22957 | 1189 ;;; hilit-chg.el ends here |