annotate msdos/ChangeLog @ 112404:2b0d6f7bbb80

Merge: src/config.in: shrink slightly

2011-01-08  Glenn Morris  <[e-mail]>

	* sedleim.inp (RUN-EMACS): -batch implies --no-init-file.

2011-01-07  Eli Zaretskii  <[e-mail]>

	* sed2v2.inp (HAVE___BUILTIN_UNWIND_INIT): Define.

2010-12-04  Andreas Schwab  <[e-mail]>

	* sed1v2.inp (M_FILE, S_FILE): Add $(srcdir)/ prefix.

2010-10-15  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp: Use $(..) instead of ${..} in all edit commands.
	Needed because of changes in revno 101897.

	* sed6.inp (mkinfodir): Edit to avoid Unix shell-isms.  Needed
	because of changes in revno 101876.

2010-10-10  Dan Nicolaescu  <[e-mail]>

	* sed1v2.inp (PROFILING_LDFLAGS):
	* sed3v2.inp (PROFILING_LDFLAGS): Remove, not defined anymore.

2010-10-09  Glenn Morris  <[e-mail]>

	* mainmake.v2 (install): Remove b2m.

2010-10-02  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (TAGS tags): Use `find' to filter out loaddefs
	files.  Make all file names in TAGS tables absolute.

2010-10-01  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp (LIBGNUTLS_LIBS, LIBGNUTLS_CFLAGS): Edit to empty.

2010-09-22  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp (LINKER): Don't edit, variable was removed from
	src/Makefile.in.
	(LD_FIRSTFLAG): Edit to empty.

2010-09-17  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp (LIBXML2_LIBS, LIBXML2_CFLAGS): Edit to empty.

2010-08-22  Chong Yidong  <[e-mail]>

	* sedleim.inp (RUN-EMACS): Don't use --multibyte.

2010-08-20  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp (IMAGEMAGICK_LIBS, IMAGEMAGICK_CFLAGS): Edit to empty.

2010-08-15  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (version): Update due to change in emacs.c.

2010-08-05  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp (UNEXEC_OBJ): Edit to unexcoff.o, due to renaming of
	unexec.c => unexcoff.c.

2010-07-29  Chad Brown  <[e-mail]>

	* sed2v2.inp (HAVE_DIRENT_H): Edit to 1.

2010-07-12  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp (C_WARNINGS_SWITCH, PROFILING_CFLAGS, PROFILING_LDFLAGS):
	Edit to empty.

	* sed3v2.inp(C_WARNINGS_SWITCH, PROFILING_CFLAGS, PROFILING_LDFLAGS):
	Edit to empty.

2010-07-11  Eli Zaretskii  <[e-mail]>

	* sed2v2.inp (HAVE_STRCHR, HAVE_STRRCHR): Don't edit, already
	defined on <sys/config.h>.

2010-07-11  Andreas Schwab  <[e-mail]>

	* sed2v2.inp (HAVE_INDEX, HAVE_RINDEX): Don't edit.
	(HAVE_STRCHR, HAVE_STRRCHR): Edit to 1.

2010-07-08  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp (stamp-oldxmenu): Don't edit out in `temacs:' target,
	which doesn't exist.

	* sed2v2.inp (HAVE_MEMCPY): Don't edit, defined on <sys/config.h>.

2010-07-08  Dan Nicolaescu  <[e-mail]>

	* sed1v2.inp: Remove reference to prefix-args.

2010-07-07  Andreas Schwab  <[e-mail]>

	* sed2v2.inp (HAVE_MEMCPY, HAVE_MEMSET): Edit to 1.
	(HAVE_BZERO): Don't edit.

2010-07-02  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp (LIB_GCC): Edit to empty.
	Return back to ../src after compiling each .el file.

2010-06-30  Glenn Morris  <[e-mail]>

	* sed1v2.inp (CANNOT_DUMP): Update for configure name change.

2010-06-26  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (version): Use emacs_version[] in src/emacs.c
	instead of lisp/version.el (see revno 100306).

	* sed1v2.inp (MKDEPDIR): Edit to empty.
	Delete lines in rules that invoke $(MKDEPDIR).  Fix editing rules
	that begin with "cd ../lisp".  Edit out sh if-then-else-fi
	constructs that test ${CANNOT_DUMP}.  Edit out "|| exit ;\"
	constructs in emacs${EXEEXT} rule.

2010-06-03  Dan Nicolaescu  <[e-mail]>

	* sed1v2.inp (UNEXEC_OBJ): Use UNEXEC_OBJ instead of unexec.

2010-06-03  Glenn Morris  <[e-mail]>

	* sed2v2.inp: Do not edit HAVE_ALLOCA.

2010-05-26  Glenn Morris  <[e-mail]>

	* sed1v2.inp (@PRE_EDIT_LDFLAGS@, @POST_EDIT_LDFLAGS@): Edit to nothing.

	* sed1v2.inp (NS_IMPL_GNUSTEP_INC, NS_IMPL_GNUSTEP_TEMACS_LDFLAGS):
	No longer present.

2010-05-25  Glenn Morris  <[e-mail]>

	* sed1v2.inp (LD_SWITCH_SYSTEM_EXTRA): No longer present.

2010-05-21  Glenn Morris  <[e-mail]>

	* sed1v2.inp (@ns_frag@): Edit to nothing.

	* sed1x.inp (OLDXMENU): Replace any initial value.
	* sed1v2.inp (OLDXMENU): Edit to "nothing".

	* sed1v2.inp (CANNOT_DUMP): Edit to no.

2010-05-20  Glenn Morris  <[e-mail]>

	* sed1v2.inp (DEPFLAGS, deps_frag): Edit to empty.
	(MKDEPDIR): Edit to ':'.

2010-05-19  Glenn Morris  <[e-mail]>

	* sed2v2.inp (ORDINARY_LINK): Set here rather than in s/msdos.h.

	* sed1v2.inp (LD): Edit to $(CC).
	(YMF_PASS_LDFLAGS): Edit to `flags'.

2010-05-18  Eli Zaretskii  <[e-mail]>

	* sed1x.inp: Add copyright notice.

2010-05-18  Glenn Morris  <[e-mail]>

	* sed1v2.inp (RALLOC_OBJ): Edit to ralloc.o.

	* sed1v2.inp (GMALLOC_OBJ): Edit to gmalloc.o.
	(VMLIMIT_OBJ): Edit to vm-limit.o.

2010-05-17  Glenn Morris  <[e-mail]>

	* sed1v2.inp (OLDXMENU_DEPS): Edit to empty.
	* sed1x.inp (OLDXMENU_DEPS): Edit to ${OLDXMENU} ../src/${OLDXMENU}.

2010-05-16  Glenn Morris  <[e-mail]>

	* sed1v2.inp (TEMACS_LDFLAGS2): Edit to $(LDFLAGS).

	* sed1v2.inp (GNUSTEP_SYSTEM_LIBRARIES): Remove.
	(NS_IMPL_GNUSTEP_TEMACS_LDFLAGS): Edit to empty.

2010-05-15  Glenn Morris  <[e-mail]>

	* sed1v2.inp (LIBXMENU): Edit to empty.
	* sed1x.inp (LIBXMENU): Expect empty initial value.

	* sed1v2.inp (OLDXMENU): Edit to empty.
	* sed1x.inp (OLDXMENU): Expect empty initial value.

	* sed1v2.inp (LIBX_OTHER): Edit to empty.
	* sed1x.inp (LIBX_OTHER): Expect empty initial value.

	* sed1v2.inp (FONT_OBJ): Edit to empty for non-X case.
	* sed1x.inp (FONT_OBJ): Edit to xfont.o for X case.

2010-05-15  Eli Zaretskii  <[e-mail]>

	* sed3v2.inp (INSTALLABLES): Edit out extra ${EXEEXT} after
	"emacsclient".
	(emacsserver, timer, wakeup): Remove edit-out commands.

	* sed1v2.inp (MSDOS_OBJ): Add w16select.o.
	(TERMCAP_OBJ): Add termcap.o.

2010-05-15  Glenn Morris  <[e-mail]>

	* sed1v2.inp (OLDXMENU_TARGET): Edit to empty.
	* sed1x.inp (OLDXMENU_TARGET): Edit to really-oldxmenu.

	* sed1v2.inp (LIBXT_OTHER): Edit to empty.

2010-05-14  Glenn Morris  <[e-mail]>

	* sed1v2.inp (ns_appdir, ns_appbindir, ns_appsrc): Edit to empty.

	* sed1v2.inp (MSDOS_OBJ): Edit to dosfns.o msdos.o.
	(MSDOS_SUPPORT): Edit to $(MSDOS_SUPPORT_REAL).
	* sed1x.inp (MSDOS_X_OBJ): Edit to w16select.o termcap.o.

	* sed2x.inp (HAVE_WINDOW_SYSTEM): Define.
	* sed1x.inp (TOOLTIP_SUPPORT): Edit to ${lispsource}tooltip.elc.
	(WINDOW_SUPPORT): Edit to $(BASE_WINDOW_SUPPORT) $(X_WINDOW_SUPPORT).
	* sed1v2.inp (MOUSE_SUPPORT): Edit to $(REAL_MOUSE_SUPPORT).
	(TOOLTIP_SUPPORT, WINDOW_SUPPORT): Edit to empty.

	* sed1v2.inp (FONT_OBJ): Use the plain X version (no XFT, Freetype).

	* sed1v2.inp (@NS_IMPL_GNUSTEP_INC@): Edit to nil.

2010-05-13  Glenn Morris  <[e-mail]>

	* sed1x.inp (OLDXMENU): Edit to ${oldXMenudir}libXMenu11.a.
	(LIBXMENU): Edit to ${OLDXMENU}.
	(LIBX_OTHER): Edit to ${LIBXT} ${LIBX_EXTRA}.

	* sed1v2.inp (C_SWITCH_X_SYSTEM, C_SWITCH_X_SITE, LIB_STANDARD)
	(FONTCONFIG_CFLAGS, FONTCONFIG_LIBS, FREETYPE_CFLAGS, FREETYPE_LIBS)
	(LIBOTF_CFLAGS, LIBOTF_LIBS, M17N_FLT_CFLAGS, M17N_FLT_LIBS)
	(GNU_OBJC_CFLAGS, GNUSTEP_SYSTEM_LIBRARIES, LIBRESOLV, LIBGPM):
	Edit to empty.
	(LIB_MATH): Edit to -lm.
	(UNEXEC_OBJ): Edit to unexec.o.

2010-05-12  Glenn Morris  <[e-mail]>

	* sed3v2.inp (INSTALLABLES): No more @LIB_SRC_EXTRA_INSTALLABLES@.

	* sed1v2.inp (LIB_GCC): Edit to -Lgcc.

2010-05-11  Glenn Morris  <[e-mail]>

	* sed1x.inp (LIBS_SYSTEM): Edit to -lxext -lsys.
	* sed3x.inp: New file.

2010-05-10  Glenn Morris  <[e-mail]>

	* sed1v2.inp, sed3v2.inp (LIBS_SYSTEM): Edit to empty.

	* sed3v2.inp (BLESSMAIL_TARGET): Edit to need-blessmail.

2010-05-07  Chong Yidong  <[e-mail]>

	* Version 23.2 released.

2010-05-08  Glenn Morris  <[e-mail]>

	* sed1v2.inp (LIBS_TERMCAP): Edit to empty.
	(TERMCAP_OBJ): Edit to tparam.o.

2010-05-07  Eli Zaretskii  <[e-mail]>

	Fix breakage due to autoconfiscation of Makefile.in files.

	* sed3v2.inp (C_SWITCH_MACHINE): Edit to empty.

	* sed1v2.inp (@LIB_MATH@): Edit to -lm.
	(C_SWITCH_MACHINE, C_SWITCH_SYSTEM, LD_SWITCH_SYSTEM_TEMACS)
	(LD_SWITCH_X_SITE_AUX, LD_SWITCH_X_SITE_AUX_RPATH)
	(LD_SWITCH_SYSTEM, LD_SWITCH_SYSTEM_EXTRA, LIBTIFF, LIBJPEG)
	(LIBPNG, LIBGIF, LIBXPM, XFT_LIBS, DBUS_CFLAGS, DBUS_LIBS)
	(DBUS_OBJ, GCONF_CFLAGS, GCONF_LIBS, GTK_OBJ, LIBXMU, LIBXSM)
	(LIBXTR6, XOBJ, TOOLKIT_LIBW, WIDGET_OBJ, CYGWIN_OBJ, NS_OBJ)
	(NS_SUPPORT, LIBSELINUX_LIBS, START_FILES): Edit to empty.
	(XMENU_OBJ): Edit to xmenu.o.
	(FONT_OBJ): Edit to value used for X on Unix.
	(PRE_ALLOC_OBJ): Edit to lastfile.o.
	(POST_ALLOC_OBJ): Edit to $(vmlimitobj).
	(@unexec@): Edit to unexec.o.

2010-05-06  Glenn Morris  <[e-mail]>

	* sed1v2.inp, sed5x.inp: Remove LN_S, unused.

2010-04-01  Eli Zaretskii  <[e-mail]>

	Remove support for DJGPP v1.x.

	* sed3.inp:
	* sed2.inp:
	* sed1.inp:
	* mainmake: Files removed.

2010-03-27  Eli Zaretskii  <[e-mail]>

	* sedlisp.inp (VPATH): Don't edit, no longer needed.
	(lisp, srcdir): Adapt to lisp/Makefile.in changes.
	(abs_top_builddir): New edit.

	* sed3v2.inp (KRB4LIB, DESLIB, KRB5LIB, CRYPTOLIB, COM_ERRLIB)
	(LIBHESIOD, LIBRESOLV, LIBS_MAIL): Edit to empty values.

	* sed3.inp (KRB4LIB, DESLIB, KRB5LIB, CRYPTOLIB, COM_ERRLIB)
	(LIBHESIOD, LIBRESOLV, LIBS_MAIL): Edit to empty values.

	* sed1v2.inp (abs_builddir): Edit into "../src".

2010-03-10  Chong Yidong  <[e-mail]>

	* Branch for 23.2.

2010-02-19  Eli Zaretskii  <[e-mail]>

	* INSTALL: Remove a CVS-specific note.  Update for latest versions
	of Windows.

2009-09-17  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp (OTHER_FILES): Edit to empty.

2009-09-11  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (bootstrap): Ensure enough environment space
	will be available to run config.bat.

2009-08-27  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp (buildobj.h): Replace "echo" with "djecho".

2009-06-21  Chong Yidong  <[e-mail]>

	* Branch for 23.1.

2009-04-14  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (src) <gdb.ini>: Don't replace the line with
	x_error_quitter; instead, append "set environment NAME" to the end.
	Set NAME and USERNAME in the environment to the same value.

2009-02-28  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (boot): Don't require b-emacs.exe if not building
	out of CVS.  (Bug#2151)

2008-12-19  Eli Zaretskii  <[e-mail]>

	* INSTALL: Document the problems on Windows Vista and the
	--with-system-malloc option to config.bat.

	* sedalloc.inp: New file.

2008-11-21  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (misc): New target.
	(all, info): Depend on `misc'.

2008-11-15  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (src): Move removal of src/bootlisp after recursing
	into `lisp'.

	Make bootstrap work again:

	* mainmake.v2 (boot): New variable.
	(src): Pass $(boot) to sub-Make.  Remove src/bootlisp.  If
	src/bootlisp exists after running Make, run Make in `lisp' as
	well.
	(clean, mostlyclean): Remove bogus repeated clean in the top-level
	directory.
	(info, bootstrap-clean): New targets.
	(bootstrap): Depend only on bootstrap-clean.  Commands modified to
	be equivalent to top-level Makefile.in.
	(bootfast, bootstrap-lisp-1, bootstrap-lisp, bootstrap-src)
	(bootstrap-clean-before, bootstrap-clean-after): Targets deleted.
	(clean, mostlyclean, distclean, maintainer-clean, extraclean):
	Don't recurse into lwlib and oldXMenu.

	* sed1v2.inp: Create bootlisp when bootstrapping b-emacs.exe.

	* sedlisp.inp: Don't convert *.el files to Unix text format, and
	don't copy ldefs-boot.el into loaddefs.el.

	* sed6.inp: Edit out Unixy shell features in maintainer-clean
	targets in doc/ Makefiles.

	* INSTALL: Update the list of utilities needed by lisp/Makefile
	and for bootstrapping.

2008-11-08  Eli Zaretskii  <[e-mail]>

	* INSTALL: New file, with build instructions moved from the
	top-level INSTALL.

2008-10-14  Eli Zaretskii  <[e-mail]>

	* sedlisp.inp (lisp): Set to absolute file name of current
	directory, not to ".", to have it on EMACSLOADPATH when we descend
	into subdirectories.

2008-08-23  Eli Zaretskii  <[e-mail]>

	* sed2v2.inp: Remove definition of USER_FULL_NAME (now defined on
	src/s/msdos.h).

	* sed3v2.inp: Edit out @LIB_SRC_EXTRA_INSTALLABLES@.

	* sed1v2.inp (version): Define to empty.
	(ALL_CFLAGS, LIBES): Edit out @FOO@ stuff.
	(EXEEXT): Define to .exe.
	Edit "ln -f" into "cp -pf".
	Edit "touch" into "djecho $@ >", to avoid requiring touch.exe.
	(b-emacs${EXEEXT}): Don't remove emacs.exe and temacs.exe.
	Edit "`/bin/pwd`/" into "./".
	Stubify emacs after it is dumped, to produce emacs.exe.
	Stubedit temacs.exe to 1024K of stack, emacs.exe to 2048K, and
	b-emacs.exe to 3072K.

	* mainmake.v2 (emacs lispref lispintro): Chdir under doc/.
	(emacs): Renamed from `man', to reflect changes in doc directory
	structure.  All callers changed.
	(clean mostlyclean distclean maintainer-clean extraclean): Chdir
	into doc/ for manuals.  Add misc subdirectory.
	(src): Pass an empty BOOTSTRAPEMACS variable to src/Makefile.
	(install): Don't stubify/stubedit emacs.exe, this is now done by
	src/Makefile.

2007-10-05  Eli Zaretskii  <[e-mail]>

	* sed6.inp: Update comment to reflect doc directory structure.

	* sed1v2.inp (RSVG_LIBS, RSVG_CFLAGS): Edit out.

2007-07-25  Glenn Morris  <[e-mail]>

	* Relicense all FSF files to GPLv3 or later.

	* COPYING: Switch to GPLv3.

2007-06-02  Chong Yidong  <[e-mail]>

	* Version 22.1 released.

2007-02-10  Glenn Morris  <[e-mail]>

	* COPYING.DJ: Remove file since it is no longer needed (see README
	for details).

2007-01-28  Glenn Morris  <[e-mail]>

	* COPYING.DJ: New file.

2006-12-04  Eli Zaretskii  <[e-mail]>

	* sed2v2.inp (HAVE_SYNC): Define.

2006-11-25  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp (CFLAGS_SOUND): Edit out.

2006-09-15  Jay Belanger  <[e-mail]>

	* COPYING: Replace "Library Public License" by "Lesser Public
	License" throughout.

2005-09-10  Sven Joachim  <[e-mail]>  (tiny change)

	* sed3v2.inp (GETOPT_H, GETOPTOBJS): Define to use getopt.h,
	getopt.o and getopt1.o.

2005-07-04  Lute Kamstra  <[e-mail]>

	Update FSF's address in GPL notices.

2004-11-10  Eli Zaretskii  <[e-mail]>

	* sed1.inp: Revert last change.

2004-11-09  Jan Djärv  <[e-mail]>

	* sed1v2.inp: Use djecho for buildobj.lst.

	* sed1.inp: Ditto.

2004-11-08  Eli Zaretskii  <[e-mail]>

	* sedlisp.inp (bootstrap-clean): Copy ldefs-boot.el onto
	loaddefs.el, unless the latter exists and is newer.

	* mainmake.v2 (mostlyclean, distclean, maintainer-clean)
	(extraclean, bootfast): New targets.
	(top_distclean): New macro, used by distclean, maintainer-clean,
	and extraclean.
	(.PHONY): Add bootfast.
	(bootstrap): Make bootstrap-after in lisp.
	(bootstrap-clean-before): Clean in man, lispref, and lispintro as well.

	* sed2v2.inp (HAVE_BZERO): Define for GCC v3.x and later.

2004-10-06  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp (LC_ALL=C): Fix src/Makefile breakage caused by
	recent (2004-09-24) changes in src/Makefile.in.

2004-08-14  Eli Zaretskii  <[e-mail]>

	* sedleim.inp: Remove the lines which say "<TAB>@true", to avoid
	running a Unixy shell and to reincarnate the "Nothing to be done
	for `all'" message from Make when there's nothing to be done.

2004-05-11  Eli Zaretskii  <[e-mail]>

	* sedleim.inp (distclean): Remove stamp-subdirs.
	(SUBDIRS): Don't use `touch', use `djecho' instead.
	(changed.tit, changed.misc): Use `djecho' instead of `echo'.

2004-05-02  Eli Zaretskii  <[e-mail]>

	* sed2v2.inp (HAVE_GETRUSAGE): Define.

2003-09-22  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (man lispref lispintro): Specify an explicit target
	`info', like Makefile.in does.

2003-08-31  Eli Zaretskii  <[e-mail]>

	* sed3v2.inp (srcdir): Use "command.com /c cd" to produce an
	absolute file name of the current working directory.  This avoids
	the warning from Make about circular dependencies.

2003-08-30  Eli Zaretskii  <[e-mail]>

	* sedlisp.inp: Set FNCASE=y for all targets in the lisp directory,
	so that CVS etc. file names are filtered out of the list of
	subdirectories.

2003-08-28  Eli Zaretskii  <[e-mail]>

	* sed6.inp (elisp.dvi, index.texi): Replace Unix shell commands
	with equivalent COMMAND.COM commands.

2003-08-24  Eli Zaretskii  <[e-mail]>

	* sed3v2.inp (EXEEXT): Define to an empty string.

	* sed1v2.inp (EXEEXT): Define to an empty string.
	Remove src/emacs after producing b-emacs.exe.

	* sed2v2.inp (HAVE_DIFFTIME, HAVE_MEMCMP, HAVE_MEMMOVE)
	(HAVE_SIZE_T): Define.

2002-04-16  Eli Zaretskii  <[e-mail]>

	* sed2v2.inp: New file.

	* sed2.inp: Remove DJGPP v2.x stuff.

2002-03-27  Eli Zaretskii  <[e-mail]>

	* sedlisp.inp <bootstrap-clean>: Make sure all *.el files have
	Unix EOLs, to avoid overflowing pure storage while bootstrapping.

2002-03-20  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (bootstrap-lisp-1, bootstrap-lisp, bootstrap-src)
	(bootstrap-clean-before, bootstrap-clean-after): Return to the
	top-level directory after sub-make.
	(bootstrap-lisp): Pass an absolute file name as value of ${lisp}.

	* sed1v2.inp: Fix editing of the rule for ${libsrc}make-docfile.

2002-03-09  Eli Zaretskii  <[e-mail]>

	Add support for bootstrapping Emacs:

	* sed1v2.inp: Edit the bootstrap-* targets.  Fix the mostlyclean
	target.

	* mainmake.v2 (maybe_bootstrap, bootstrap, bootstrap-lisp-1)
	(bootstrap-lisp, bootstrap-src, bootstrap-clean-before)
	(bootstrap-clean-after): New targets.
	(all): Depend on maybe_bootstrap.

2001-12-21  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp: Delete _gdbinit in distclean target.

2001-12-09  Pavel Janík  <[e-mail]>

	* COPYING: Moved back.

2001-12-07  Eli Zaretskii  <[e-mail]>

	* sed2.inp (HAVE_VFORK): Don't define: the fragment in sysdep.c
	which needed it is gone.

2001-11-29  Pavel Janík  <[e-mail]>

	* COPYING: Removed.

2001-11-24  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (lispintro): New target.
	(all): Add lispintro.

	* sed6.inp (SHELL): Comment away, for lispintro.

2001-11-10  Eli Zaretskii  <[e-mail]>

	* sed6.inp (texinputdir): Add, for the lispref directory.

	* mainmake.v2 (all): Add lispref.
	(man lispref): Add lispref.

2001-10-20  Gerd Moellmann  <[e-mail]>

	* (Version 21.1 released.)

2001-10-05  Gerd Moellmann  <[e-mail]>

	* Branch for 21.1.

2001-07-20  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (install): Create site-lisp/subdirs.el if it is not
	already there.

2001-07-06  Eli Zaretskii  <[e-mail]>

	* sed2.inp: Ifdef away the test for !HAVE_MKTIME, to avoid parse
	error in "gcc -E -traditional" with GCC 3.0.

2001-04-02  Eli Zaretskii  <[e-mail]>

	* sedleim.inp (srcdir=): Edit @srcdir@ into an absolute file name
	of the leim subdirectory, so that EMACSLOADPATH doesn't break when
	titdic-convert chdirs into leim/quail.

2001-03-30  Eli Zaretskii  <[e-mail]>

	* sedleim.inp: Adapt to changes in leim/Makefile.in's $(TIT)
	target.

2001-03-01  Eli Zaretskii  <[e-mail]>

	* README: New file.

	* sed1.inp: Add copyright.
	* sed1v2.inp: Add copyright.
	* sed2.inp: Add copyright.
	* sed2x.inp: Add copyright.
	* sed3.inp: Add copyright.
	* sed3v2.inp: Add copyright.
	* sed4.inp: Add copyright.
	* sed5x.inp: Add copyright.
	* sed6.inp: Add copyright.
	* sedleim.inp: Add copyright.
	* sedlisp.inp: Add copyright.

2001-02-20  Eli Zaretskii  <[e-mail]>

	* mainmake.v2, mainmake: Add copyright.

2000-11-22  Eli Zaretskii  <[e-mail]>

	* sed2.inp (NSIG) [__DJGPP__ == 2 && __DJGPP_MINOR__ == 1]:
	Define; it is undefined in DJGPP v2.01.

2000-11-13  Eli Zaretskii  <[e-mail]>

	* sed2.inp (HAVE_MKSTEMP): Define.

2000-10-07  Eli Zaretskii  <[e-mail]>

	* sedleim.inp (RUN-EMACS): Remove EMACSLOADPATH setting as part of
	the command; use Make's "export EMACSLOADPATH=" instead.  Remove
	the handling of `command` expansion, leim/Makefile.in doesn't use
	that anymore.

2000-08-29  Eli Zaretskii  <[e-mail]>

	* sed2.inp (HAVE_INDEX, HAVE_RINDEX): Define.

2000-08-22  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (TAGS): Don't use [a-zA-Z]*, as it causes wildcard
	expansion to become case-sensitive and return all file names in
	upper case on plain DOS.

2000-08-05  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (src): Put gdb.tmp after -a, since djecho's -a
	switch requires an argument.

2000-07-31  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (src): Make the rule faster by using a single djecho
	command instead of multiple redir invocations.
	(install): Speed up by using a command.com's for loop.

2000-07-23  Eli Zaretskii  <[e-mail]>

	* sed3v2.inp: Define ALLOCA to an empty string.

2000-07-18  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp: Put getloadavg.o into LIBOBJS, not GETLOADAVG_LIBS.

2000-07-09  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp: Set LIBSOUND to an empty string.

2000-06-26  Eli Zaretskii  <[e-mail]>

	* sed2.inp: Define HAVE_STRUCT_TIMEZONE in src/config.h.

2000-06-25  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp: Set GETLOADAVG_LIBS to getloadavg.o in src/Makefile.

2000-06-18  Eli Zaretskii  <[e-mail]>

	* sedlisp.inp (srcdir): Edit this variable.

2000-06-15  Eli Zaretskii  <[e-mail]>

	* sedlisp.inp: New file.

2000-05-18  Eli Zaretskii  <[e-mail]>

	* sed6.inp: Changes to allow "make foo.dvi" on DJGPP platforms:
	(ENVADD): Redefine as empty, to avoid requiring a Unixy shell.
	(TEXINPUTS): Use semi-colon; export explicitly.
	(MAKEINFO): Export explicitly.

2000-05-01  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (install): Install ebrowse.exe.

2000-04-14  Dave Love  <[e-mail]>

	* sed1v2.inp, sed1.inp: Add LIBS, LIBOBJS.

2000-03-13  Eli Zaretskii  <[e-mail]>

	* sed2.inp: Add PROTOTYPES and POINTER_TYPE, per the new
	config.in.

2000-01-27  Eli Zaretskii  <[e-mail]>

	* sed2.inp (HAVE_SETITIMER): Define.

1999-11-18  Eli Zaretskii  <[e-mail]>

	* sed2.inp (HAVE_TM_GMTOFF, HAVE_MBLEN): Define.

	* sed1v2.inp: Convert "LC_ALL=C ./temacs" to MS-DOS equivalent.

1999-07-29  Eli Zaretskii  <[e-mail]>

	* sedleim.inp (SHELL, MAKESHELL): Use /xyzzy/command as the shell.

1999-07-12  Richard Stallman  <[e-mail]>

	* Version 20.4 released.

1999-07-01  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (SHELL, MAKESHELL): Don't use /dos/command, it can
	invoke an incompatible version of COMMAND.COM.

1999-05-19  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp: Use -gcoff instead of -g in CFLAGS, for those who
	have GCC configured by default to use stabs, which unexec.c
	doesn't currently support.

1999-01-14  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (install): Use update instead of sed to install fns.el.

1999-01-11  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (install): Install fns.el in ../bin, since Emacs
	looks for it in exec-directory.

1999-01-07  Eli Zaretskii  <[e-mail]>

	* sedleim.inp: New file, for configuring the leim directory.

	* mainmake.v2 (src): Build files in leim if leim/Makefile exists.
	(clean): Add clean in leim.

1998-11-08  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (SHELL, MAKESHELL): Don't use `override'.

1998-10-20  Eli Zaretskii  <[e-mail]>

	* mainmake.v2: Forcibly set SHELL and MAKESHELL to force Make to
	use COMMAND.COM as the shell.

1998-08-19  Richard Stallman  <[e-mail]>

	* Version 20.3 released.

1998-05-04  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (TAGS tags): Fix file name wildcards in lisp
	directory.

1998-04-13  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (src): Replace topdir with top_srcdir in commands
	which generate gdb.ini.

1998-04-12  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (version): Determine emacs-version from
	lisp/version.el.  Pass it to sub-Make's.

1998-04-05  Eli Zaretskii  <[e-mail]>

	* sed3v2.inp: When installing ${version},
	do it replacing @version@.

	* mainmake.v2 (version): Compute the version from lisp/version.el
	and pass to sub-Make's.  Pass top_srcdir to sub-Make's.

1997-11-20  Eli Zaretskii  <[e-mail]>

	* sed6.inp: New file, configures the man directory for MSDOS.

	* mainmake.v2 (man): New target to build the manual.
	(all): Add the man dependency.
	(install): Change bin\\nul to bin\nul.

1997-09-19  Richard Stallman  <[e-mail]>

	* Version 20.2 released.

1997-09-15  Richard Stallman  <[e-mail]>

	* Version 20.1 released.

1997-09-07  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp: Enlarge the stack size of temacs to 100KB.

1997-08-13  Eli Zaretskii  <[e-mail]>

	* sed2.inp (EMACS_CONFIGURATION): Set to i386-pc-msdosdjgpp.

1997-08-10  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp (CPPFLAGS, LDFLAGS): Edit to empty.

1997-07-10  Eli Zaretskii  <[e-mail]>

	* sed2.inp (HAVE_LOGB, HAVE_FREXP, HAVE_FMOD, HAVE_RINT)
	(HAVE_CBRT, HAVE_FPATHCONF, HAVE_SETRLIMIT): Defined.

	* sed1.inp, sed1v2.inp: Remove `stamp-oldxmenu' dependency, so
	MSDOS users won't need `touch' installed.

	* mainmake.v2 (TAGS, tags): Include new lisp subdirectories.

1996-08-11  Richard Stallman  <[e-mail]>

	* Version 19.33 released.

1996-08-04  Richard Stallman  <[e-mail]>

	* is_exec.c: Renamed from is-exec.c.

1996-07-27  Richard Stallman  <[e-mail]>

	* Version 19.32 released.

	* is-exec.c, sigaction.c: New files.

1996-07-24  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (TAGS): Make sure bin/etags.exe is current.  Make
	the rules always generate TAGS.

1996-06-09  Eli Zaretskii  <[e-mail]>

	* sed2.inp: Don't undef MULTI_FRAME.

1996-05-25  Karl Heuer  <[e-mail]>

	* Version 19.31 released.

1996-04-17  Eli Zaretskii  <[e-mail]>

	* sed1.inp: Replace `make-docfile' with `make-doc.exe'.  In case
	src/Makefile needs to rebuild `make-doc.exe', use one command per line.
	Undo the previous change.

1996-04-15  Richard Stallman  <[e-mail]>

	* sed1.inp: Change make-docfile to make-doc.exe in a second place.

1996-04-15  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (src): Create a file with sed commands instead of using
	a long sed command line (some versions of Sed don't handle that).
	(gdb): Merged back into src, undoing April 13 change.
	(install): Do use if statements, but not a loop.

1996-04-13  Richard Stallman  <[e-mail]>

	* mainmake.v2 (gdb): New target, broken out of src.
	(install): Use simple explicit copy commands, not a loop.

1996-04-10  Eli Zaretskii  <[e-mail]>

	* sed2.inp: Under DJGPP v2, use <sys/config.h> instead of most of
	config.h.in.

	* sed1v2.inp, sed3v2.inp, mainmake.v2: New files.

1996-01-23  Karl Heuer  <[e-mail]>

	* sed2.inp (LOCALTIME_CACHE, HAVE_TZSET): Define these.

1995-11-24  Richard Stallman  <[e-mail]>

	* Version 19.30 released.

1995-11-21  Richard Stallman  <[e-mail]>

	* sed3.inp: Alter test-distrib to test-dis.

1995-11-03  Karl Heuer  <[e-mail]>

	* mainmake (install): Don't mv make-doc.exe into ../bin/.

1995-10-11  Kim Storm  <[e-mail]>

	* sed1.inp: Call make-doc.exe instead of make-docfile.

1995-06-08  Karl Heuer  <[e-mail]>

	* sed2.inp: Define STDC_HEADERS.
	Undefine MULTI_FRAME, until somebody fixes msdos.h and msdos.c.

1995-01-20  Karl Heuer  <[e-mail]>

	* sed3.inp: Fix sed append command to behave as intended.

1995-01-20  Morten Welinder  <[e-mail]>

	* sed3.inp: Delete mysterious dot.  Add comment to protect blank
	line at end of file.  Make sure make-docfile is compiled.

1995-01-10  Karl Heuer  <[e-mail]>

	* sed3.inp: Use coff2exe on make-docfile.
	* sed1.inp: Not go32, which has problems with long arg lists.

1994-10-17  Morten Welinder  <[e-mail]>

	* sed1.inp: Handle "\t#"-style comments.
	(obj): Don't add any files -- now done in src/makefile.in.in.
	(temacs): Don't depend on prefix-args.
	(DOC): Reflect makefile changes regarding two-batch run.

	* sed2.inp: Add comments showing how to use the system malloc.
	(EMACS_CONFIG_OPTIONS): Set though not useful.
	(HAVE_MKTIME): Define.

	* mainmake (clean): Add target.

	* sed1x.inp, sed2x.inp, sed5x.inp: New files for X configuration.

1994-07-14  Morten Welinder  ([e-mail])

	* sed2.inp (HAVE_STRERROR): Define.

1994-07-08  Morten Welinder  ([e-mail])

	* sed1.inp, sed2.inp: Use "m/intel386" instead of "m/dos386.h".

1994-06-01  Morten Welinder  ([e-mail])

	* sed4.inp: New file for configuring src/paths.h.

1994-05-30  Richard Stallman  ([e-mail])

	* Version 19.25 released.

1994-05-22  Morten Welinder  ([e-mail])

	* sed1.inp: Adding dos-fns.elc to the set of lisp files was moved
	to src/makefile.in.in.

1994-05-20  Morten Welinder  ([e-mail])

	* sed2.inp: Reflect change from CONFIGURATION to EMACS_CONFIGURATION.
	Also set it to correct three-part value.

1994-05-16  Morten Welinder  ([e-mail])

	* Version 19.23 released.

	* sed1.inp: Don't use `+' in regexps as different stream
	editors interpret them differently.  Use `*' instead.

1994-05-12  Morten Welinder  ([e-mail])

	* mainmake (install): Set the minimum stack (for running under
	DPMI) to 512K.  Avoid using wildcard for matching one file.

1994-05-08  Morten Welinder  ([e-mail])

	* sed3.inp: Don't pass version to [ce]tags.

1994-04-30  Morten Welinder  ([e-mail])

	* sed1.inp: Don't comment out the inc-vers run as that
	does not exist anymore.
	Don't reset DEBUG_MOLE as that no longer is used.
	Identify the file being patched as src/...
	* sed2.inp: Identify the file being patched as src/...
	* sed3.inp: We don't have to have the version number in here
	anymore.  Instead we patch the way it is passed from make to
	the C compiler.

1994-04-29  Morten Welinder  ([e-mail])

	* sed1.inp: Set CFLAGS=-O2, not -g.  Handle the new
	M_FILE, S_FILE, and SET_MAKE defines.  Get rid of ^Ms.

	* sed2.inp: We have bcmp.  Configuration is "msdos".
	Get rid of ^Ms.

	* sed3.inp: Set CFLAGS=-O2, not -g.  Correct for
	new configuration regarding utilities not to compile.
	Fix version number.  Get rid of ^Ms.

1994-01-08  Morten Welinder  ([e-mail])

	* sed3.inp: Improve make-compatibility by not using drive
	specifications and by not specifying an explicit shell.

1994-01-07  Morten Welinder  ([e-mail])

	* sed1.inp: Incorporate the actions of patch1.
	* patch1: File deleted.

1993-01-05  Morten Welinder  ([e-mail])

	* mainmake: New file, makefile for the main directory.

	* patch1: New file.  Context diff to turn src/makefile.in into
	a msdos version called makefile.

	* emacs.pif: New file, program information file for Emacs under
	Windows.  (This file contains non-printable characters.)

	* emacs.ico: New file, icon for Emacs under Windows.  It's so ugly
	that someone is bound to create a better one.  Mail uuencoded icons
	to [e-mail], but be prepared to sign a copyright disclaimer.
	(This file contains non-printable characters.)

	* sed3.inp: New file for changing lib-src/makefile.in into
	lib-src/makefile.

	* sed2.inp: New file for changing src/config.h-in into src/config.h.

	* sed1.inp: New file for changing src/makefile.in.in into src/makefile.

;; Local Variables:
;; coding: utf-8
;; End:

    Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003,
       2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.

  This file is part of GNU Emacs.

  GNU Emacs is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  GNU Emacs is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.