Mercurial > emacs
annotate src/s/hpux.h @ 2915:2c9dde3bd3a0
Initial revision
author | Jim Blandy <jimb@redhat.com> |
---|---|
date | Thu, 20 May 1993 02:04:15 +0000 |
parents | 6c044c8796dd |
children | 571142b03bf4 |
rev | line source |
---|---|
456 | 1 /* Definitions file for GNU Emacs running on HPUX release 7.0. |
2 Based on AT&T System V.2. | |
3 Copyright (C) 1985, 1986 Free Software Foundation, Inc. | |
4 | |
5 This file is part of GNU Emacs. | |
6 | |
7 GNU Emacs is free software; you can redistribute it and/or modify | |
8 it under the terms of the GNU General Public License as published by | |
9 the Free Software Foundation; either version 1, or (at your option) | |
10 any later version. | |
11 | |
12 GNU Emacs is distributed in the hope that it will be useful, | |
13 but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 GNU General Public License for more details. | |
16 | |
17 You should have received a copy of the GNU General Public License | |
18 along with GNU Emacs; see the file COPYING. If not, write to | |
19 the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ | |
20 | |
21 | |
22 /* | |
23 * Define symbols to identify the version of Unix this is. | |
24 * Define all the symbols that apply correctly. | |
25 */ | |
26 | |
27 #define USG /* System III, System V, etc */ | |
28 | |
29 #define USG5 | |
30 | |
31 #define HPUX | |
32 | |
33 /* SYSTEM_TYPE should indicate the kind of system you are using. | |
34 It sets the Lisp variable system-type. */ | |
35 | |
36 #define SYSTEM_TYPE "hpux" | |
37 | |
38 /* `nomultiplejobs' should be defined if your system's shell | |
39 does not have "job control" (the ability to stop a program, | |
40 run some other program, then continue the first one). | |
41 | |
42 On hpux this depends on the precise kind of machine in use, | |
43 so the m- file defines this symbol if appropriate. */ | |
44 | |
45 /* Default is to set interrupt_input to 0: don't do input buffering within Emacs */ | |
46 | |
47 /* #define INTERRUPT_INPUT */ | |
48 | |
49 /* Letter to use in finding device name of first pty, | |
50 if system supports pty's. 'p' means it is /dev/ptym/ptyp0 */ | |
51 | |
52 #define FIRST_PTY_LETTER 'p' | |
53 | |
54 /* | |
55 * Define HAVE_TERMIO if the system provides sysV-style ioctls | |
56 * for terminal control. | |
57 */ | |
58 | |
59 #define HAVE_TERMIO | |
60 | |
61 /* Says to include time.h, and not include sys/time.h. */ | |
62 | |
63 #define NEED_TIME_H | |
64 | |
65 /* | |
66 * Define HAVE_TIMEVAL if the system supports the BSD style clock values. | |
67 * Look in <sys/time.h> for a timeval structure. | |
68 */ | |
69 | |
70 #define HAVE_TIMEVAL | |
71 | |
72 /* With HAVE_TIMEVAL define, Emacs expects to use `utimes'. | |
73 But HPUX does not have one. */ | |
74 | |
75 #define MISSING_UTIMES | |
76 | |
77 /* | |
78 * Define HAVE_SELECT if the system supports the `select' system call. | |
79 */ | |
80 | |
81 #define HAVE_SELECT | |
82 | |
83 /* | |
84 * Define HAVE_PTYS if the system supports pty devices. | |
85 */ | |
86 | |
87 #define HAVE_PTYS | |
88 | |
89 /* Define HAVE_SOCKETS if system supports 4.2-compatible sockets. */ | |
90 | |
91 #define HAVE_SOCKETS | |
92 | |
93 /* | |
94 * Define NONSYSTEM_DIR_LIBRARY to make Emacs emulate | |
95 * The 4.2 opendir, etc., library functions. | |
96 */ | |
97 | |
98 /* #define NONSYSTEM_DIR_LIBRARY */ | |
99 | |
100 /* Define this symbol if your system has the functions bcopy, etc. | |
101 * s800 and later versions of s300 (s200) kernels have equivilents | |
102 * of the BSTRING functions of BSD. If your s200 kernel doesn't have | |
103 * em comment out this section. | |
104 */ | |
105 | |
106 #define BSTRING | |
107 | |
108 /* subprocesses should be defined if you want to | |
109 have code for asynchronous subprocesses | |
110 (as used in M-x compile and M-x shell). | |
111 This is generally OS dependent, and not supported | |
112 under most USG systems. */ | |
113 | |
114 #define subprocesses | |
115 | |
116 /* If your system uses COFF (Common Object File Format) then define the | |
117 preprocessor symbol "COFF". */ | |
118 | |
119 /* #define COFF */ | |
120 | |
121 /* define MAIL_USE_FLOCK if the mailer uses flock | |
122 to interlock access to /usr/spool/mail/$USER. | |
123 The alternative is that a lock file named | |
124 /usr/spool/mail/$USER.lock. */ | |
125 | |
126 /* #define MAIL_USE_FLOCK */ | |
127 | |
128 /* Say we have the SYSV style of interprocess communication. */ | |
129 | |
130 #define HAVE_SYSVIPC | |
131 | |
132 /* Define CLASH_DETECTION if you want lock files to be written | |
133 so that Emacs can tell instantly when you try to modify | |
134 a file that someone else has modified in his Emacs. */ | |
135 | |
545 | 136 #define CLASH_DETECTION |
456 | 137 |
138 /* Define SHORTNAMES if the C compiler can distinguish only | |
139 short names. It means that the stuff in ../shortnames | |
140 must be run to convert the long names to short ones. | |
141 | |
142 Some USG systems support long names. | |
143 If yours is one, DO NOT change this file! | |
144 Do #undef SHORTNAMES in the m- file or in config.h. */ | |
145 | |
146 /* #define SHORTNAMES */ | |
147 | |
148 /* We use the Berkeley (and usg5.2.2) interface to nlist. */ | |
149 | |
150 #define NLIST_STRUCT | |
151 | |
152 /* The file containing the kernel's symbol table is called /hp-ux. */ | |
153 | |
154 #define KERNEL_FILE "/hp-ux" | |
155 | |
156 /* The symbol in the kernel where the load average is found | |
157 depends on the cpu type, so we let the m- files define LDAV_SYMBOL. */ | |
158 | |
159 /* Special hacks needed to make Emacs run on this system. */ | |
160 | |
161 /* | |
162 * Make the sigsetmask function go away. Don't know what the | |
163 * ramifications of this are, but doesn't seem possible to | |
164 * emulate it properly anyway at this point. | |
165 */ | |
166 | |
167 /* HPUX has sigsetmask */ | |
168 /* #define sigsetmask(mask) / * Null expansion * / */ | |
169 | |
170 /* setjmp and longjmp can safely replace _setjmp and _longjmp, | |
171 but they will run slower. */ | |
172 | |
173 /* HP-UX has _setjmp and _longjmp */ | |
174 /* | |
175 #define _setjmp setjmp | |
176 #define _longjmp longjmp | |
177 */ | |
178 | |
179 /* On USG systems the system calls are interruptable by signals | |
180 that the user program has elected to catch. Thus the system call | |
181 must be retried in these cases. To handle this without massive | |
182 changes in the source code, we remap the standard system call names | |
183 to names for our own functions in sysdep.c that do the system call | |
184 with retries. */ | |
185 | |
186 #define read sys_read | |
187 #define open sys_open | |
188 #define write sys_write | |
189 | |
190 #define INTERRUPTIBLE_OPEN | |
191 #define INTERRUPTIBLE_IO | |
192 | |
193 /* Use the system provided termcap(3) library */ | |
194 #define TERMINFO | |
195 | |
196 /* The 48-bit versions are more winning for Emacs. */ | |
197 | |
198 #define rand lrand48 | |
199 #define srand srand48 | |
200 | |
201 /* In hpux, the symbol SIGIO is defined, but the feature | |
625 | 202 doesn't work in the way Emacs needs it to. |
456 | 203 |
204 Here we assume that signal.h is included before config.h | |
205 so that we can override it here. */ | |
206 | |
207 #undef SIGIO | |
208 | |
209 /* USG systems tend to put everything declared static | |
210 into the initialized data area, which becomes pure after dumping Emacs. | |
211 Foil this. Emacs carefully avoids static vars inside functions. */ | |
212 | |
213 #define static | |
214 | |
215 /* Define extra libraries to load. | |
216 This should have -lBSD, but that library is said to make | |
217 `signal' fail to work. */ | |
218 | |
219 #ifdef HPUX_NET | |
220 #define LIBS_SYSTEM -ln | |
221 #else | |
222 #define LIBS_SYSTEM | |
223 #endif | |
224 | |
225 /* Some additional system facilities exist. */ | |
226 | |
227 #define HAVE_GETTIMEOFDAY | |
1492
a40107cc6486
(HAVE_GETHOSTNAME): Define it.
Richard M. Stallman <rms@gnu.org>
parents:
625
diff
changeset
|
228 |
456 | 229 #define HAVE_VFORK |
230 #define HAVE_PERROR /* Delete this line for version 6. */ | |
621 | 231 #define HAVE_RENAME |
456 | 232 |
233 /* The following maps shared exec file to demand loaded exec. | |
234 Don't do this as demand loaded exec is broken in hpux. */ | |
235 | |
236 #if 0 | |
237 | |
238 /* Adjust a header field for the executable file about to be dumped. */ | |
239 | |
240 #define ADJUST_EXEC_HEADER \ | |
241 hdr.a_magic = ((ohdr.a_magic.file_type == OLDMAGIC.file_type) ? \ | |
242 NEWMAGIC : ohdr.a_magic); | |
243 | |
244 #endif | |
245 | |
246 /* Baud-rate values in tty status have nonstandard meanings. */ | |
247 | |
248 #define BAUD_CONVERT \ | |
249 { 0, 50, 75, 110, 135, 150, 200, 300, 600, 900, 1200, \ | |
250 1800, 2400, 3600, 4800, 7200, 9600, 19200, 38400 } | |
251 | |
252 /* This is needed for HPUX version 6.2; it may not be needed for 6.2.1. */ | |
253 #define SHORT_CAST_BUG | |
254 | |
255 /* This is how to get the device name of the tty end of a pty. */ | |
256 #define PTY_TTY_NAME_SPRINTF \ | |
621 | 257 sprintf (pty_name, "/dev/pty/tty%c%x", c, i); |
456 | 258 |
259 /* This is how to get the device name of the control end of a pty. */ | |
260 #define PTY_NAME_SPRINTF \ | |
621 | 261 sprintf (pty_name, "/dev/ptym/pty%c%x", c, i); |