Mercurial > emacs
annotate doc/lispref/backups.texi @ 103250:3113546dd713
(x_delete_display): Don't call XrmDestroyDatabase here.
(x_delete_terminal): Dissociate resource database from display and
then call XrmDestroyDatabase before closing display.
author | YAMAMOTO Mitsuharu <mituharu@math.s.chiba-u.ac.jp> |
---|---|
date | Tue, 19 May 2009 00:26:46 +0000 |
parents | cb5d2387102c |
children | c32ec20d0ab5 |
rev | line source |
---|---|
84050 | 1 @c -*-texinfo-*- |
2 @c This is part of the GNU Emacs Lisp Reference Manual. | |
3 @c Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1999, 2001, 2002, 2003, | |
100974 | 4 @c 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. |
84050 | 5 @c See the file elisp.texi for copying conditions. |
84116
0ba80d073e27
(setfilename): Go up one more level to ../../info.
Glenn Morris <rgm@gnu.org>
parents:
84050
diff
changeset
|
6 @setfilename ../../info/backups |
84050 | 7 @node Backups and Auto-Saving, Buffers, Files, Top |
8 @chapter Backups and Auto-Saving | |
9 @cindex backups and auto-saving | |
10 | |
11 Backup files and auto-save files are two methods by which Emacs tries | |
12 to protect the user from the consequences of crashes or of the user's | |
13 own errors. Auto-saving preserves the text from earlier in the current | |
14 editing session; backup files preserve file contents prior to the | |
15 current session. | |
16 | |
17 @menu | |
18 * Backup Files:: How backup files are made; how their names are chosen. | |
19 * Auto-Saving:: How auto-save files are made; how their names are chosen. | |
20 * Reverting:: @code{revert-buffer}, and how to customize what it does. | |
21 @end menu | |
22 | |
23 @node Backup Files | |
24 @section Backup Files | |
25 @cindex backup file | |
26 | |
27 A @dfn{backup file} is a copy of the old contents of a file you are | |
28 editing. Emacs makes a backup file the first time you save a buffer | |
29 into its visited file. Thus, normally, the backup file contains the | |
30 contents of the file as it was before the current editing session. | |
31 The contents of the backup file normally remain unchanged once it | |
32 exists. | |
33 | |
34 Backups are usually made by renaming the visited file to a new name. | |
35 Optionally, you can specify that backup files should be made by copying | |
36 the visited file. This choice makes a difference for files with | |
37 multiple names; it also can affect whether the edited file remains owned | |
38 by the original owner or becomes owned by the user editing it. | |
39 | |
40 By default, Emacs makes a single backup file for each file edited. | |
41 You can alternatively request numbered backups; then each new backup | |
42 file gets a new name. You can delete old numbered backups when you | |
43 don't want them any more, or Emacs can delete them automatically. | |
44 | |
45 @menu | |
46 * Making Backups:: How Emacs makes backup files, and when. | |
47 * Rename or Copy:: Two alternatives: renaming the old file or copying it. | |
48 * Numbered Backups:: Keeping multiple backups for each source file. | |
49 * Backup Names:: How backup file names are computed; customization. | |
50 @end menu | |
51 | |
52 @node Making Backups | |
53 @subsection Making Backup Files | |
54 | |
55 @defun backup-buffer | |
56 This function makes a backup of the file visited by the current | |
57 buffer, if appropriate. It is called by @code{save-buffer} before | |
58 saving the buffer the first time. | |
59 | |
60 If a backup was made by renaming, the return value is a cons cell of | |
61 the form (@var{modes} . @var{backupname}), where @var{modes} are the | |
62 mode bits of the original file, as returned by @code{file-modes} | |
63 (@pxref{File Attributes,, Other Information about Files}), and | |
64 @var{backupname} is the name of the backup. In all other cases, that | |
65 is, if a backup was made by copying or if no backup was made, this | |
66 function returns @code{nil}. | |
67 @end defun | |
68 | |
69 @defvar buffer-backed-up | |
70 This buffer-local variable says whether this buffer's file has | |
71 been backed up on account of this buffer. If it is non-@code{nil}, | |
72 the backup file has been written. Otherwise, the file should be backed | |
73 up when it is next saved (if backups are enabled). This is a | |
74 permanent local; @code{kill-all-local-variables} does not alter@tie{}it. | |
75 @end defvar | |
76 | |
77 @defopt make-backup-files | |
78 This variable determines whether or not to make backup files. If it | |
79 is non-@code{nil}, then Emacs creates a backup of each file when it is | |
80 saved for the first time---provided that @code{backup-inhibited} | |
81 is @code{nil} (see below). | |
82 | |
83 The following example shows how to change the @code{make-backup-files} | |
84 variable only in the Rmail buffers and not elsewhere. Setting it | |
85 @code{nil} stops Emacs from making backups of these files, which may | |
86 save disk space. (You would put this code in your init file.) | |
87 | |
88 @smallexample | |
89 @group | |
90 (add-hook 'rmail-mode-hook | |
91 (function (lambda () | |
92 (make-local-variable | |
93 'make-backup-files) | |
94 (setq make-backup-files nil)))) | |
95 @end group | |
96 @end smallexample | |
97 @end defopt | |
98 | |
99 @defvar backup-enable-predicate | |
100 This variable's value is a function to be called on certain occasions to | |
101 decide whether a file should have backup files. The function receives | |
102 one argument, an absolute file name to consider. If the function returns | |
103 @code{nil}, backups are disabled for that file. Otherwise, the other | |
104 variables in this section say whether and how to make backups. | |
105 | |
106 @findex normal-backup-enable-predicate | |
107 The default value is @code{normal-backup-enable-predicate}, which checks | |
108 for files in @code{temporary-file-directory} and | |
109 @code{small-temporary-file-directory}. | |
110 @end defvar | |
111 | |
112 @defvar backup-inhibited | |
113 If this variable is non-@code{nil}, backups are inhibited. It records | |
114 the result of testing @code{backup-enable-predicate} on the visited file | |
115 name. It can also coherently be used by other mechanisms that inhibit | |
116 backups based on which file is visited. For example, VC sets this | |
117 variable non-@code{nil} to prevent making backups for files managed | |
118 with a version control system. | |
119 | |
120 This is a permanent local, so that changing the major mode does not lose | |
121 its value. Major modes should not set this variable---they should set | |
122 @code{make-backup-files} instead. | |
123 @end defvar | |
124 | |
125 @defvar backup-directory-alist | |
126 This variable's value is an alist of filename patterns and backup | |
127 directory names. Each element looks like | |
128 @smallexample | |
129 (@var{regexp} . @var{directory}) | |
130 @end smallexample | |
131 | |
132 @noindent | |
133 Backups of files with names matching @var{regexp} will be made in | |
134 @var{directory}. @var{directory} may be relative or absolute. If it is | |
135 absolute, so that all matching files are backed up into the same | |
136 directory, the file names in this directory will be the full name of the | |
137 file backed up with all directory separators changed to @samp{!} to | |
138 prevent clashes. This will not work correctly if your filesystem | |
139 truncates the resulting name. | |
140 | |
141 For the common case of all backups going into one directory, the alist | |
142 should contain a single element pairing @samp{"."} with the appropriate | |
143 directory name. | |
144 | |
145 If this variable is @code{nil}, or it fails to match a filename, the | |
146 backup is made in the original file's directory. | |
147 | |
148 On MS-DOS filesystems without long names this variable is always | |
149 ignored. | |
150 @end defvar | |
151 | |
152 @defvar make-backup-file-name-function | |
153 This variable's value is a function to use for making backups instead | |
154 of the default @code{make-backup-file-name}. A value of @code{nil} | |
155 gives the default @code{make-backup-file-name} behavior. | |
156 @xref{Backup Names,, Naming Backup Files}. | |
157 | |
158 This could be buffer-local to do something special for specific | |
159 files. If you define it, you may need to change | |
160 @code{backup-file-name-p} and @code{file-name-sans-versions} too. | |
161 @end defvar | |
162 | |
163 | |
164 @node Rename or Copy | |
165 @subsection Backup by Renaming or by Copying? | |
166 @cindex backup files, rename or copy | |
167 | |
168 There are two ways that Emacs can make a backup file: | |
169 | |
170 @itemize @bullet | |
171 @item | |
172 Emacs can rename the original file so that it becomes a backup file, and | |
173 then write the buffer being saved into a new file. After this | |
174 procedure, any other names (i.e., hard links) of the original file now | |
175 refer to the backup file. The new file is owned by the user doing the | |
176 editing, and its group is the default for new files written by the user | |
177 in that directory. | |
178 | |
179 @item | |
180 Emacs can copy the original file into a backup file, and then overwrite | |
181 the original file with new contents. After this procedure, any other | |
182 names (i.e., hard links) of the original file continue to refer to the | |
183 current (updated) version of the file. The file's owner and group will | |
184 be unchanged. | |
185 @end itemize | |
186 | |
187 The first method, renaming, is the default. | |
188 | |
189 The variable @code{backup-by-copying}, if non-@code{nil}, says to use | |
190 the second method, which is to copy the original file and overwrite it | |
191 with the new buffer contents. The variable @code{file-precious-flag}, | |
192 if non-@code{nil}, also has this effect (as a sideline of its main | |
193 significance). @xref{Saving Buffers}. | |
194 | |
195 @defopt backup-by-copying | |
196 If this variable is non-@code{nil}, Emacs always makes backup files by | |
197 copying. | |
198 @end defopt | |
199 | |
200 The following three variables, when non-@code{nil}, cause the second | |
201 method to be used in certain special cases. They have no effect on the | |
202 treatment of files that don't fall into the special cases. | |
203 | |
204 @defopt backup-by-copying-when-linked | |
205 If this variable is non-@code{nil}, Emacs makes backups by copying for | |
206 files with multiple names (hard links). | |
207 | |
208 This variable is significant only if @code{backup-by-copying} is | |
209 @code{nil}, since copying is always used when that variable is | |
210 non-@code{nil}. | |
211 @end defopt | |
212 | |
213 @defopt backup-by-copying-when-mismatch | |
214 If this variable is non-@code{nil}, Emacs makes backups by copying in cases | |
215 where renaming would change either the owner or the group of the file. | |
216 | |
217 The value has no effect when renaming would not alter the owner or | |
218 group of the file; that is, for files which are owned by the user and | |
219 whose group matches the default for a new file created there by the | |
220 user. | |
221 | |
222 This variable is significant only if @code{backup-by-copying} is | |
223 @code{nil}, since copying is always used when that variable is | |
224 non-@code{nil}. | |
225 @end defopt | |
226 | |
227 @defopt backup-by-copying-when-privileged-mismatch | |
228 This variable, if non-@code{nil}, specifies the same behavior as | |
229 @code{backup-by-copying-when-mismatch}, but only for certain user-id | |
230 values: namely, those less than or equal to a certain number. You set | |
231 this variable to that number. | |
232 | |
233 Thus, if you set @code{backup-by-copying-when-privileged-mismatch} | |
234 to 0, backup by copying is done for the superuser only, | |
235 when necessary to prevent a change in the owner of the file. | |
236 | |
237 The default is 200. | |
238 @end defopt | |
239 | |
240 @node Numbered Backups | |
241 @subsection Making and Deleting Numbered Backup Files | |
242 | |
243 If a file's name is @file{foo}, the names of its numbered backup | |
244 versions are @file{foo.~@var{v}~}, for various integers @var{v}, like | |
245 this: @file{foo.~1~}, @file{foo.~2~}, @file{foo.~3~}, @dots{}, | |
246 @file{foo.~259~}, and so on. | |
247 | |
248 @defopt version-control | |
249 This variable controls whether to make a single non-numbered backup | |
250 file or multiple numbered backups. | |
251 | |
252 @table @asis | |
253 @item @code{nil} | |
254 Make numbered backups if the visited file already has numbered backups; | |
255 otherwise, do not. This is the default. | |
256 | |
257 @item @code{never} | |
258 Do not make numbered backups. | |
259 | |
260 @item @var{anything else} | |
261 Make numbered backups. | |
262 @end table | |
263 @end defopt | |
264 | |
265 The use of numbered backups ultimately leads to a large number of | |
266 backup versions, which must then be deleted. Emacs can do this | |
267 automatically or it can ask the user whether to delete them. | |
268 | |
269 @defopt kept-new-versions | |
270 The value of this variable is the number of newest versions to keep | |
271 when a new numbered backup is made. The newly made backup is included | |
272 in the count. The default value is@tie{}2. | |
273 @end defopt | |
274 | |
275 @defopt kept-old-versions | |
276 The value of this variable is the number of oldest versions to keep | |
277 when a new numbered backup is made. The default value is@tie{}2. | |
278 @end defopt | |
279 | |
280 If there are backups numbered 1, 2, 3, 5, and 7, and both of these | |
281 variables have the value 2, then the backups numbered 1 and 2 are kept | |
282 as old versions and those numbered 5 and 7 are kept as new versions; | |
283 backup version 3 is excess. The function @code{find-backup-file-name} | |
284 (@pxref{Backup Names}) is responsible for determining which backup | |
285 versions to delete, but does not delete them itself. | |
286 | |
287 @defopt delete-old-versions | |
288 If this variable is @code{t}, then saving a file deletes excess | |
289 backup versions silently. If it is @code{nil}, that means | |
290 to ask for confirmation before deleting excess backups. | |
291 Otherwise, they are not deleted at all. | |
292 @end defopt | |
293 | |
294 @defopt dired-kept-versions | |
295 This variable specifies how many of the newest backup versions to keep | |
296 in the Dired command @kbd{.} (@code{dired-clean-directory}). That's the | |
297 same thing @code{kept-new-versions} specifies when you make a new backup | |
298 file. The default is@tie{}2. | |
299 @end defopt | |
300 | |
301 @node Backup Names | |
302 @subsection Naming Backup Files | |
303 | |
304 The functions in this section are documented mainly because you can | |
305 customize the naming conventions for backup files by redefining them. | |
306 If you change one, you probably need to change the rest. | |
307 | |
308 @defun backup-file-name-p filename | |
309 This function returns a non-@code{nil} value if @var{filename} is a | |
310 possible name for a backup file. It just checks the name, not whether | |
311 a file with the name @var{filename} exists. | |
312 | |
313 @smallexample | |
314 @group | |
315 (backup-file-name-p "foo") | |
316 @result{} nil | |
317 @end group | |
318 @group | |
319 (backup-file-name-p "foo~") | |
320 @result{} 3 | |
321 @end group | |
322 @end smallexample | |
323 | |
324 The standard definition of this function is as follows: | |
325 | |
326 @smallexample | |
327 @group | |
328 (defun backup-file-name-p (file) | |
329 "Return non-nil if FILE is a backup file \ | |
330 name (numeric or not)..." | |
331 (string-match "~\\'" file)) | |
332 @end group | |
333 @end smallexample | |
334 | |
335 @noindent | |
336 Thus, the function returns a non-@code{nil} value if the file name ends | |
337 with a @samp{~}. (We use a backslash to split the documentation | |
338 string's first line into two lines in the text, but produce just one | |
339 line in the string itself.) | |
340 | |
341 This simple expression is placed in a separate function to make it easy | |
342 to redefine for customization. | |
343 @end defun | |
344 | |
345 @defun make-backup-file-name filename | |
346 This function returns a string that is the name to use for a | |
347 non-numbered backup file for file @var{filename}. On Unix, this is just | |
348 @var{filename} with a tilde appended. | |
349 | |
350 The standard definition of this function, on most operating systems, is | |
351 as follows: | |
352 | |
353 @smallexample | |
354 @group | |
355 (defun make-backup-file-name (file) | |
356 "Create the non-numeric backup file name for FILE..." | |
357 (concat file "~")) | |
358 @end group | |
359 @end smallexample | |
360 | |
361 You can change the backup-file naming convention by redefining this | |
362 function. The following example redefines @code{make-backup-file-name} | |
363 to prepend a @samp{.} in addition to appending a tilde: | |
364 | |
365 @smallexample | |
366 @group | |
367 (defun make-backup-file-name (filename) | |
368 (expand-file-name | |
369 (concat "." (file-name-nondirectory filename) "~") | |
370 (file-name-directory filename))) | |
371 @end group | |
372 | |
373 @group | |
374 (make-backup-file-name "backups.texi") | |
375 @result{} ".backups.texi~" | |
376 @end group | |
377 @end smallexample | |
378 | |
379 Some parts of Emacs, including some Dired commands, assume that backup | |
380 file names end with @samp{~}. If you do not follow that convention, it | |
381 will not cause serious problems, but these commands may give | |
382 less-than-desirable results. | |
383 @end defun | |
384 | |
385 @defun find-backup-file-name filename | |
386 This function computes the file name for a new backup file for | |
387 @var{filename}. It may also propose certain existing backup files for | |
388 deletion. @code{find-backup-file-name} returns a list whose @sc{car} is | |
389 the name for the new backup file and whose @sc{cdr} is a list of backup | |
390 files whose deletion is proposed. The value can also be @code{nil}, | |
391 which means not to make a backup. | |
392 | |
393 Two variables, @code{kept-old-versions} and @code{kept-new-versions}, | |
394 determine which backup versions should be kept. This function keeps | |
395 those versions by excluding them from the @sc{cdr} of the value. | |
396 @xref{Numbered Backups}. | |
397 | |
398 In this example, the value says that @file{~rms/foo.~5~} is the name | |
399 to use for the new backup file, and @file{~rms/foo.~3~} is an ``excess'' | |
400 version that the caller should consider deleting now. | |
401 | |
402 @smallexample | |
403 @group | |
404 (find-backup-file-name "~rms/foo") | |
405 @result{} ("~rms/foo.~5~" "~rms/foo.~3~") | |
406 @end group | |
407 @end smallexample | |
408 @end defun | |
409 | |
410 @c Emacs 19 feature | |
411 @defun file-newest-backup filename | |
412 This function returns the name of the most recent backup file for | |
413 @var{filename}, or @code{nil} if that file has no backup files. | |
414 | |
415 Some file comparison commands use this function so that they can | |
416 automatically compare a file with its most recent backup. | |
417 @end defun | |
418 | |
419 @node Auto-Saving | |
420 @section Auto-Saving | |
421 @c @cindex auto-saving Lots of symbols starting with auto-save here. | |
422 | |
423 Emacs periodically saves all files that you are visiting; this is | |
424 called @dfn{auto-saving}. Auto-saving prevents you from losing more | |
425 than a limited amount of work if the system crashes. By default, | |
426 auto-saves happen every 300 keystrokes, or after around 30 seconds of | |
427 idle time. @xref{Auto Save, Auto Save, Auto-Saving: Protection Against | |
428 Disasters, emacs, The GNU Emacs Manual}, for information on auto-save | |
429 for users. Here we describe the functions used to implement auto-saving | |
430 and the variables that control them. | |
431 | |
432 @defvar buffer-auto-save-file-name | |
433 This buffer-local variable is the name of the file used for | |
434 auto-saving the current buffer. It is @code{nil} if the buffer | |
435 should not be auto-saved. | |
436 | |
437 @example | |
438 @group | |
439 buffer-auto-save-file-name | |
440 @result{} "/xcssun/users/rms/lewis/#backups.texi#" | |
441 @end group | |
442 @end example | |
443 @end defvar | |
444 | |
445 @deffn Command auto-save-mode arg | |
446 When used interactively without an argument, this command is a toggle | |
447 switch: it turns on auto-saving of the current buffer if it is off, and | |
448 vice versa. With an argument @var{arg}, the command turns auto-saving | |
449 on if the value of @var{arg} is @code{t}, a nonempty list, or a positive | |
450 integer. Otherwise, it turns auto-saving off. | |
451 @end deffn | |
452 | |
453 @defun auto-save-file-name-p filename | |
454 This function returns a non-@code{nil} value if @var{filename} is a | |
455 string that could be the name of an auto-save file. It assumes | |
456 the usual naming convention for auto-save files: a name that | |
457 begins and ends with hash marks (@samp{#}) is a possible auto-save file | |
458 name. The argument @var{filename} should not contain a directory part. | |
459 | |
460 @example | |
461 @group | |
462 (make-auto-save-file-name) | |
463 @result{} "/xcssun/users/rms/lewis/#backups.texi#" | |
464 @end group | |
465 @group | |
466 (auto-save-file-name-p "#backups.texi#") | |
467 @result{} 0 | |
468 @end group | |
469 @group | |
470 (auto-save-file-name-p "backups.texi") | |
471 @result{} nil | |
472 @end group | |
473 @end example | |
474 | |
475 The standard definition of this function is as follows: | |
476 | |
477 @example | |
478 @group | |
479 (defun auto-save-file-name-p (filename) | |
480 "Return non-nil if FILENAME can be yielded by..." | |
481 (string-match "^#.*#$" filename)) | |
482 @end group | |
483 @end example | |
484 | |
485 This function exists so that you can customize it if you wish to | |
486 change the naming convention for auto-save files. If you redefine it, | |
487 be sure to redefine the function @code{make-auto-save-file-name} | |
488 correspondingly. | |
489 @end defun | |
490 | |
491 @defun make-auto-save-file-name | |
492 This function returns the file name to use for auto-saving the current | |
493 buffer. This is just the file name with hash marks (@samp{#}) prepended | |
494 and appended to it. This function does not look at the variable | |
495 @code{auto-save-visited-file-name} (described below); callers of this | |
496 function should check that variable first. | |
497 | |
498 @example | |
499 @group | |
500 (make-auto-save-file-name) | |
501 @result{} "/xcssun/users/rms/lewis/#backups.texi#" | |
502 @end group | |
503 @end example | |
504 | |
505 Here is a simplified version of the standard definition of this | |
506 function: | |
507 | |
508 @example | |
509 @group | |
510 (defun make-auto-save-file-name () | |
511 "Return file name to use for auto-saves \ | |
512 of current buffer.." | |
513 (if buffer-file-name | |
514 @end group | |
515 @group | |
516 (concat | |
517 (file-name-directory buffer-file-name) | |
518 "#" | |
519 (file-name-nondirectory buffer-file-name) | |
520 "#") | |
521 (expand-file-name | |
522 (concat "#%" (buffer-name) "#")))) | |
523 @end group | |
524 @end example | |
525 | |
526 This exists as a separate function so that you can redefine it to | |
527 customize the naming convention for auto-save files. Be sure to | |
528 change @code{auto-save-file-name-p} in a corresponding way. | |
529 @end defun | |
530 | |
531 @defopt auto-save-visited-file-name | |
532 If this variable is non-@code{nil}, Emacs auto-saves buffers in | |
533 the files they are visiting. That is, the auto-save is done in the same | |
534 file that you are editing. Normally, this variable is @code{nil}, so | |
535 auto-save files have distinct names that are created by | |
536 @code{make-auto-save-file-name}. | |
537 | |
538 When you change the value of this variable, the new value does not take | |
539 effect in an existing buffer until the next time auto-save mode is | |
540 reenabled in it. If auto-save mode is already enabled, auto-saves | |
541 continue to go in the same file name until @code{auto-save-mode} is | |
542 called again. | |
543 @end defopt | |
544 | |
545 @defun recent-auto-save-p | |
546 This function returns @code{t} if the current buffer has been | |
547 auto-saved since the last time it was read in or saved. | |
548 @end defun | |
549 | |
550 @defun set-buffer-auto-saved | |
551 This function marks the current buffer as auto-saved. The buffer will | |
552 not be auto-saved again until the buffer text is changed again. The | |
553 function returns @code{nil}. | |
554 @end defun | |
555 | |
556 @defopt auto-save-interval | |
557 The value of this variable specifies how often to do auto-saving, in | |
558 terms of number of input events. Each time this many additional input | |
559 events are read, Emacs does auto-saving for all buffers in which that is | |
560 enabled. Setting this to zero disables autosaving based on the | |
561 number of characters typed. | |
562 @end defopt | |
563 | |
564 @defopt auto-save-timeout | |
565 The value of this variable is the number of seconds of idle time that | |
566 should cause auto-saving. Each time the user pauses for this long, | |
567 Emacs does auto-saving for all buffers in which that is enabled. (If | |
568 the current buffer is large, the specified timeout is multiplied by a | |
569 factor that increases as the size increases; for a million-byte | |
570 buffer, the factor is almost 4.) | |
571 | |
572 If the value is zero or @code{nil}, then auto-saving is not done as a | |
573 result of idleness, only after a certain number of input events as | |
574 specified by @code{auto-save-interval}. | |
575 @end defopt | |
576 | |
577 @defvar auto-save-hook | |
578 This normal hook is run whenever an auto-save is about to happen. | |
579 @end defvar | |
580 | |
581 @defopt auto-save-default | |
582 If this variable is non-@code{nil}, buffers that are visiting files | |
583 have auto-saving enabled by default. Otherwise, they do not. | |
584 @end defopt | |
585 | |
586 @deffn Command do-auto-save &optional no-message current-only | |
587 This function auto-saves all buffers that need to be auto-saved. It | |
588 saves all buffers for which auto-saving is enabled and that have been | |
589 changed since the previous auto-save. | |
590 | |
591 If any buffers are auto-saved, @code{do-auto-save} normally displays a | |
592 message saying @samp{Auto-saving...} in the echo area while | |
593 auto-saving is going on. However, if @var{no-message} is | |
594 non-@code{nil}, the message is inhibited. | |
595 | |
596 If @var{current-only} is non-@code{nil}, only the current buffer | |
597 is auto-saved. | |
598 @end deffn | |
599 | |
600 @defun delete-auto-save-file-if-necessary &optional force | |
601 This function deletes the current buffer's auto-save file if | |
602 @code{delete-auto-save-files} is non-@code{nil}. It is called every | |
603 time a buffer is saved. | |
604 | |
605 Unless @var{force} is non-@code{nil}, this function only deletes the | |
606 file if it was written by the current Emacs session since the last | |
607 true save. | |
608 @end defun | |
609 | |
610 @defopt delete-auto-save-files | |
611 This variable is used by the function | |
612 @code{delete-auto-save-file-if-necessary}. If it is non-@code{nil}, | |
613 Emacs deletes auto-save files when a true save is done (in the visited | |
614 file). This saves disk space and unclutters your directory. | |
615 @end defopt | |
616 | |
617 @defun rename-auto-save-file | |
618 This function adjusts the current buffer's auto-save file name if the | |
619 visited file name has changed. It also renames an existing auto-save | |
620 file, if it was made in the current Emacs session. If the visited | |
621 file name has not changed, this function does nothing. | |
622 @end defun | |
623 | |
624 @defvar buffer-saved-size | |
625 The value of this buffer-local variable is the length of the current | |
626 buffer, when it was last read in, saved, or auto-saved. This is | |
627 used to detect a substantial decrease in size, and turn off auto-saving | |
628 in response. | |
629 | |
630 If it is @minus{}1, that means auto-saving is temporarily shut off in | |
631 this buffer due to a substantial decrease in size. Explicitly saving | |
632 the buffer stores a positive value in this variable, thus reenabling | |
633 auto-saving. Turning auto-save mode off or on also updates this | |
634 variable, so that the substantial decrease in size is forgotten. | |
635 @end defvar | |
636 | |
637 @defvar auto-save-list-file-name | |
638 This variable (if non-@code{nil}) specifies a file for recording the | |
639 names of all the auto-save files. Each time Emacs does auto-saving, it | |
640 writes two lines into this file for each buffer that has auto-saving | |
641 enabled. The first line gives the name of the visited file (it's empty | |
642 if the buffer has none), and the second gives the name of the auto-save | |
643 file. | |
644 | |
645 When Emacs exits normally, it deletes this file; if Emacs crashes, you | |
646 can look in the file to find all the auto-save files that might contain | |
647 work that was otherwise lost. The @code{recover-session} command uses | |
648 this file to find them. | |
649 | |
650 The default name for this file specifies your home directory and starts | |
651 with @samp{.saves-}. It also contains the Emacs process @acronym{ID} and the | |
652 host name. | |
653 @end defvar | |
654 | |
655 @defvar auto-save-list-file-prefix | |
656 After Emacs reads your init file, it initializes | |
657 @code{auto-save-list-file-name} (if you have not already set it | |
658 non-@code{nil}) based on this prefix, adding the host name and process | |
659 ID. If you set this to @code{nil} in your init file, then Emacs does | |
660 not initialize @code{auto-save-list-file-name}. | |
661 @end defvar | |
662 | |
663 @node Reverting | |
664 @section Reverting | |
665 | |
666 If you have made extensive changes to a file and then change your mind | |
667 about them, you can get rid of them by reading in the previous version | |
668 of the file with the @code{revert-buffer} command. @xref{Reverting, , | |
669 Reverting a Buffer, emacs, The GNU Emacs Manual}. | |
670 | |
671 @deffn Command revert-buffer &optional ignore-auto noconfirm preserve-modes | |
672 This command replaces the buffer text with the text of the visited | |
673 file on disk. This action undoes all changes since the file was visited | |
674 or saved. | |
675 | |
676 By default, if the latest auto-save file is more recent than the visited | |
677 file, and the argument @var{ignore-auto} is @code{nil}, | |
678 @code{revert-buffer} asks the user whether to use that auto-save | |
679 instead. When you invoke this command interactively, @var{ignore-auto} | |
680 is @code{t} if there is no numeric prefix argument; thus, the | |
681 interactive default is not to check the auto-save file. | |
682 | |
683 Normally, @code{revert-buffer} asks for confirmation before it changes | |
684 the buffer; but if the argument @var{noconfirm} is non-@code{nil}, | |
685 @code{revert-buffer} does not ask for confirmation. | |
686 | |
687 Normally, this command reinitializes the buffer's major and minor modes | |
688 using @code{normal-mode}. But if @var{preserve-modes} is | |
689 non-@code{nil}, the modes remain unchanged. | |
690 | |
691 Reverting tries to preserve marker positions in the buffer by using the | |
692 replacement feature of @code{insert-file-contents}. If the buffer | |
693 contents and the file contents are identical before the revert | |
694 operation, reverting preserves all the markers. If they are not | |
695 identical, reverting does change the buffer; in that case, it preserves | |
696 the markers in the unchanged text (if any) at the beginning and end of | |
697 the buffer. Preserving any additional markers would be problematical. | |
698 @end deffn | |
699 | |
700 You can customize how @code{revert-buffer} does its work by setting | |
701 the variables described in the rest of this section. | |
702 | |
703 @defopt revert-without-query | |
704 This variable holds a list of files that should be reverted without | |
705 query. The value is a list of regular expressions. If the visited file | |
706 name matches one of these regular expressions, and the file has changed | |
707 on disk but the buffer is not modified, then @code{revert-buffer} | |
708 reverts the file without asking the user for confirmation. | |
709 @end defopt | |
710 | |
711 Some major modes customize @code{revert-buffer} by making | |
712 buffer-local bindings for these variables: | |
713 | |
714 @defvar revert-buffer-function | |
715 @anchor{Definition of revert-buffer-function} | |
716 The value of this variable is the function to use to revert this | |
717 buffer. If non-@code{nil}, it should be a function with two optional | |
718 arguments to do the work of reverting. The two optional arguments, | |
719 @var{ignore-auto} and @var{noconfirm}, are the arguments that | |
720 @code{revert-buffer} received. If the value is @code{nil}, reverting | |
721 works the usual way. | |
722 | |
723 Modes such as Dired mode, in which the text being edited does not | |
724 consist of a file's contents but can be regenerated in some other | |
725 fashion, can give this variable a buffer-local value that is a function to | |
726 regenerate the contents. | |
727 @end defvar | |
728 | |
729 @defvar revert-buffer-insert-file-contents-function | |
730 The value of this variable, if non-@code{nil}, specifies the function to use to | |
731 insert the updated contents when reverting this buffer. The function | |
732 receives two arguments: first the file name to use; second, @code{t} if | |
733 the user has asked to read the auto-save file. | |
734 | |
735 The reason for a mode to set this variable instead of | |
736 @code{revert-buffer-function} is to avoid duplicating or replacing the | |
737 rest of what @code{revert-buffer} does: asking for confirmation, | |
738 clearing the undo list, deciding the proper major mode, and running the | |
739 hooks listed below. | |
740 @end defvar | |
741 | |
742 @defvar before-revert-hook | |
743 This normal hook is run by @code{revert-buffer} before | |
744 inserting the modified contents---but only if | |
745 @code{revert-buffer-function} is @code{nil}. | |
746 @end defvar | |
747 | |
748 @defvar after-revert-hook | |
749 This normal hook is run by @code{revert-buffer} after inserting | |
750 the modified contents---but only if @code{revert-buffer-function} is | |
751 @code{nil}. | |
752 @end defvar | |
753 | |
754 @ignore | |
755 arch-tag: 295a6321-e5ab-46d5-aef5-0bb4f447a67f | |
756 @end ignore |