annotate msdos/ChangeLog @ 30411:41f228350eca

Got rid of all byte-compiler warnings on Emacs Load ada-xref.el before ada-prj.el, so that the Project menu is created when ada-prj tries to add to it. (ada-activate-keys-for-case): Suppress the characters that are not part of the Ada syntax. Better compatibility with else-mode (ada-adjust-case-interactive): When auto-casing is not active, correctly insert newlines (used to insert only ^M). Prevent the syntax table from being changed in case of an error (or '_' becomes part of a word and some commands are confused). Do nothing if ada-auto-case is nil. (ada-after-keyword-p): Ignore keywords that are also attributes (ada-batch-reformat): Update usage comment (ada-call-from-contextual-menu): New function (ada-case-read-exceptions): Reinitialize the casing exception list first to nil first, so that the casing exception file can be shared. (ada-check-defun-name): Handles "configure" keyword for gnatdist files. (ada-compile-goto-error): Fix regexp used to detect a file:line anywhere in the error message (ada-contextual-menu-last-point): New variable (ada-create-keymap): If the variable delete-key-deletes-forward is t on XEmacs, it means that DEL should delete one character forward. (ada-create-menu): Use :included instead of :visible for XEmacs. New submenu "Options". (ada-end-stmt-re): Correctly indent "select ... then abort" statements. (ada-fill-comment-paragraph): Correctly delete all leading '--' even if they don't match ada-fill-comment-prefix Fix handling of paragraphs on the first or last line of a file. (ada-format-paramlist): Fix handling of default parameter values. (ada-get-body-name): New function. (ada-get-current-indent): Optimized by searchling directly for an existing generic part or a statement outside of it. Handle ada-indent-align-comments when indenting comments Replaced some regexps by testing directly the next character. This results in a huge speedup on some files. New indentation scheme for renames statements. Stop looking for the 'while' or 'for' associated with a 'loop' at the first semicolon encountered. A "return" can also match an anonymous access subprogram declaration. (ada-get-indent-noindent): Ignore strings and comments when looking for the keywords "record" and "private". (ada-goto-matching-decl-start): When matching "if", make sure we are not in fact seeing "end if". Ignore "when" statements except when initial keyword was "begin". Fix handling of nested procedures. Add a recursive call to this function to skip over other 'end' statmts. Fix indentation for "when .. => begin" (ada-in-open-paren-p): Fix indentation for complex boolean expressions, where 'and then', 'or else' and parenthesis statements are mixed up. (ada-in-paramlist-p): Skip comments while searching for the beginning Fix handling of operator declarations. (ada-indent-align-comments): New variable (ada-indent-current): Change the syntax table only in the protected section, so that we are sure it is restored correctly. (ada-indent-on-previous-lines): Use ada-use-indent and ada-with-indent Correctly indent "select ... then" (ada-indent-region): Slight speedup. (ada-indent-renames): New variable. (ada-last-which-function-subprog, ada-last-which-function-line): New variables (ada-looking-at-semi-private): Correctly indent the 'private' keyword when it is the first word in a package declaration. (ada-loose-case-word): Stop searching if at the end of the buffer. (ada-loose-case-word, ada-capitalize-word): Recase the whole word even if point is not initially at the end of the word. (ada-matching-decl-start-re): Add "when". (ada-mode): Add support for abbrev-mode, outline-mode and which-func-mode Override the old find-file.el entry in ff-special-constructs since it is using the obsolete ada-spec-suffix variable (ada-no-auto-case): New function (ada-scan-paramlist): When parsing the argument type, accept spaces (as in "X 'Class", generated by Rational Rose). (ada-other-file-name): No longer loads the other file. (ada-popup-menu): Save and restore the current buffer and cursor position before and after displaying the menu. (ada-search-ignore-complex-boolean): New function. (ada-uncomment-region): Emacs21 already knows how to delete comments not starting in the first column. (ada-use-indent): New variable (ada-which-function): New function. (ada-with-indent): New variable (ada-xemacs): evaluate it at compile time too, so that ada-mode.el can be batch-compiled from the command line.

2000-07-23  Eli Zaretskii  <[e-mail]>

	* sed3v2.inp: Define ALLOCA to an empty string.

2000-07-18  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp: Put getloadavg.o into LIBOBJS, not GETLOADAVG_LIBS.

2000-07-09  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp: Set LIBSOUND to an empty string.

2000-06-26  Eli Zaretskii  <[e-mail]>

	* sed2.inp: Define HAVE_STRUCT_TIMEZONE in src/config.h.

2000-06-25  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp: Set GETLOADAVG_LIBS to getloadavg.o in src/Makefile.

2000-06-18  Eli Zaretskii  <[e-mail]>

	* sedlisp.inp (srcdir): Edit this variable.

2000-06-15  Eli Zaretskii  <[e-mail]>

	* sedlisp.inp: New file.

2000-05-18  Eli Zaretskii  <[e-mail]>

	* sed6.inp: Changes to allow "make foo.dvi" on DJGPP platforms:
	(ENVADD): Redefine as empty, to avoid requiring a Unixy shell.
	(TEXINPUTS): Use semi-colon; export explicitly.
	(MAKEINFO): Export explicitly.

2000-05-01  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (install): Install ebrowse.exe.

2000-04-14  Dave Love  <[e-mail]>

	* sed1v2.inp, sed1.inp: Add LIBS, LIBOBJS.

2000-03-13  Eli Zaretskii  <[e-mail]>

	* sed2.inp: Add PROTOTYPES and POINTER_TYPE, per the new
	config.in.

2000-01-27  Eli Zaretskii  <[e-mail]>

	* sed2.inp (HAVE_SETITIMER): Define.

1999-11-18  Eli Zaretskii  <[e-mail]>

	* sed2.inp (HAVE_TM_GMTOFF, HAVE_MBLEN): Define.

	* sed1v2.inp: Convert "LC_ALL=C ./temacs" to MS-DOS equivalent.

1999-07-29  Eli Zaretskii  <[e-mail]>

	* sedleim.inp (SHELL, MAKESHELL): Use /xyzzy/command as the shell.

1999-07-12  Richard Stallman  <[e-mail]>

	* Version 20.4 released.

1999-07-01  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (SHELL, MAKESHELL): Don't use /dos/command, it can
	invoke an incompatible version of COMAMND.COM.

1999-05-19  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp: Use -gcoff instead of -g in CFLAGS, for those who
	have GCC configured by default to use stabs, which unexec.c
	doesn't currently support.

1999-01-14  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (install): Use update instead of sed to install fns.el.

1999-01-11  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (install): Install fns.el in ../bin, since Emacs
	looks for it in exec-directory.

1999-01-07  Eli Zaretskii  <[e-mail]>

	* sedleim.inp: New file, for configuring the leim directory.

	* mainmake.v2 (src): Build files in leim if leim/Makefile exists.
	(clean): Add clean in leim.

1998-11-08  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (SHELL, MAKESHELL): Don't use `override'.

1998-10-20  Eli Zaretskii  <[e-mail]>

	* mainmake.v2: Forcibly set SHELL and MAKESHELL to force Make to
	use COMMAND.COM as the shell.

1998-08-19  Richard Stallman  <[e-mail]>

	* Version 20.3 released.

1998-05-04  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (TAGS tags): Fix file name wildcards in lisp
	directory.

1998-04-13  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (src): Replace topdir with top_srcdir in commands
	which generate gdb.ini.

1998-04-12  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (version): Determine emacs-version from
	lisp/version.el.  Pass it to sub-Make's.

1998-04-05  Eli Zaretskii  <[e-mail]>

	* sed3v2.inp: When installing ${version},
	do it replacing @version@.

	* mainmake.v2 (version): Compute the version from lisp/version.el
	and pass to sub-Make's.  Pass top_srcdir to sub-Make's.

1997-11-20  Eli Zaretskii  <[e-mail]>

	* sed6.inp: New file, configures the man directory for MSDOS.

	* mainmake.v2 (man): New target to build the manual.
	(all): Add the man dependency.
	(install): Change bin\\nul to bin\nul.

1997-09-19  Richard Stallman  <[e-mail]>

	* Version 20.2 released.

1997-09-15  Richard Stallman  <[e-mail]>

	* Version 20.1 released.

1997-09-07  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp: Enlarge the stack size of temacs to 100KB.

1997-08-13  Eli Zaretskii  <[e-mail]>

	* sed2.inp: (EMACS_CONFIGURATION): Set to i386-pc-msdosdjgpp.

1997-08-10 +03  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp (CPPFLAGS, LDFLAGS): Edit to empty.

1997-07-10  Eli Zaretskii  <[e-mail]>

	* sed2.inp (HAVE_LOGB, HAVE_FREXP, HAVE_FMOD, HAVE_RINT)
	(HAVE_CBRT, HAVE_FPATHCONF, HAVE_SETRLIMIT): Defined.

	* sed1.inp, sed1v2.inp: Remove `stamp-oldxmenu' dependency, so
	MSDOS users won't need `touch' installed.

	* mainmake.v2 (TAGS, tags): Include new lisp subdirectories.

1996-08-11  Richard Stallman  <[e-mail]>

	* Version 19.33 released.

1996-08-04  Richard Stallman  <[e-mail]>

	* is_exec.c: Renamed from is-exec.c.

1996-07-27  Richard Stallman  <[e-mail]>

	* Version 19.32 released.

	* is-exec.c, sigaction.c: New files.

1996-07-24  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (TAGS): Make sure bin/etags.exe is current.  Make
	the rules always generate TAGS.

1996-06-09  Eli Zaretskii  <[e-mail]>

	* sed2.inp: Don't undef MULTI_FRAME.

1996-05-25  Karl Heuer  <[e-mail]>

	* Version 19.31 released.

1996-04-17  Eli Zaretskii  <[e-mail]>

	* sed1.inp: Replace `make-docfile' with `make-doc.exe'.  In case
	src/Makefile needs to rebuild `make-doc.exe', use one command per line.
	Undo the previous change.
	
1996-04-15  Richard Stallman  <[e-mail]>

	* sed1.inp: Change make-docfile to make-doc.exe in a second place. 

1996-04-15  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (src): Create a file with sed commands instead of using
	a long sed command line (some versions of Sed don't handle that).
	(gdb): Merged back into src, undoing April 13 change.
	(install): Do use if statements, but not a loop.
	
1996-04-13  Richard Stallman  <[e-mail]>

	* mainmake.v2 (gdb): New target, broken out of src.
	(install): Use simple explicit copy commands, not a loop.

1996-04-10  Eli Zaretskii  <[e-mail]>

	* sed2.inp: Under DJGPP v2, use <sys/config.h> instead of most of
	config.h.in.

	* sed1v2.inp, sed3v2.inp, mainmake.v2: New files.

1996-01-23  Karl Heuer  <[e-mail]>

	* sed2.inp (LOCALTIME_CACHE, HAVE_TZSET): Define these.

1995-11-24  Richard Stallman  <[e-mail]>

	* Version 19.30 released.

1995-11-21  Richard Stallman  <[e-mail]>

	* sed3.inp: Alter test-distrib to test-dis.

1995-11-03  Karl Heuer  <[e-mail]>

	* mainmake (install): Don't mv make-doc.exe into ../bin/.

1995-10-11  Kim Storm  <[e-mail]>

	* sed1.inp: Call make-doc.exe instead of make-docfile.

1995-06-08  Karl Heuer  <[e-mail]>

	* sed2.inp: Define STDC_HEADERS.
	Undefine MULTI_FRAME, until somebody fixes msdos.h and msdos.c.

1995-01-20  Karl Heuer  <[e-mail]>

	* sed3.inp: Fix sed append command to behave as intended.

1995-01-20  Morten Welinder  <[e-mail]>

	* sed3.inp: Delete mysterious dot.  Add comment to protect blank
	line at end of file.  Make sure make-docfile is compiled.

1995-01-10  Karl Heuer  <[e-mail]>

	* sed3.inp: Use coff2exe on make-docfile.
	* sed1.inp: Not go32, which has problems with long arg lists.

1994-10-17  Morten Welinder  <[e-mail]>

	* sed1.inp: Handle "\t#"-style comments.
	(obj): Don't add any files -- now done in src/makefile.in.in
	(temacs): Don't depend on prefix-args.
	(DOC): Reflect makefile changes regarding two-batch run.

	* sed2.inp: Add comments showing how to use the system malloc.
	(EMACS_CONFIG_OPTIONS): Set though not useful.
	(HAVE_MKTIME): Define.

	* mainmake (clean): Add target.

	* sed1x.inp, sed2x.inp, sed5x.inp: New files for X configuration.


1994-07-14  Morten Welinder  ([e-mail])

	* sed2.inp (HAVE_STRERROR): Define.

1994-07-08  Morten Welinder  ([e-mail])

	* sed1.inp, sed2.inp: Use "m/intel386" instead of "m/dos386.h".

1994-06-01  Morten Welinder  ([e-mail])

	* sed4.inp: New file for configuring src/paths.h.

1994-05-30  Richard Stallman  ([e-mail])

	* Version 19.25 released.

1994-05-22  Morten Welinder  ([e-mail])

	* sed1.inp: Adding dos-fns.elc to the set of lisp files was moved
	to src/makefile.in.in.

1994-05-20  Morten Welinder  ([e-mail])

	* sed2.inp: Reflect change from CONFIGURATION to EMACS_CONFIGURATION.
	Also set it to correct three-part value.

1994-05-16  Morten Welinder  ([e-mail])

	* Version 19.23 released.

	* sed1.inp: Don't use `+' in regexps as different stream
	editors interpret them differently.  Use `*' instead.

1994-05-12  Morten Welinder  ([e-mail])

	* mainmake (install): Set the minimum stack (for running under
	DPMI) to 512K.  Avoid using wildcard for matching one file.

1994-05-08  Morten Welinder  ([e-mail])

	* sed3.inp: Don't pass version to [ce]tags.

1994-04-30  Morten Welinder  ([e-mail])

	* sed1.inp: don't comment out the inc-vers run as that
	does not exist anymore.
	Don't reset DEBUG_MOLE as that no longer is used.
	Identify the file being patched as src/...
	* sed2.inp: Identify the file being patched as src/...
	* sed3.inp: We don't have to have the version number in here
	anymore.  Instead we patch the way it is passed from make to
	the C compiler.

1994-04-29  Morten Welinder  ([e-mail])

	* sed1.inp: Set CFLAGS=-O2, not -g.  Handle the new
	M_FILE, S_FILE, and SET_MAKE defines.  Get rid of ^Ms.

	* sed2.inp: We have bcmp.  Configuration is "msdos".
	Get rid of ^Ms.

	* sed3.inp: Set CFLAGS=-O2, not -g.  Correct for
	new configuration regarding utilities not to compile.
	Fix version number.  Get rid of ^Ms.

1994-01-08  Morten Welinder  ([e-mail])

	* sed3.inp: improve make-compatibility by not using drive
	specifications and by not specifying an explicit shell.

1994-01-07  Morten Welinder  ([e-mail])

	* sed1.inp: Incorporate the actions of patch1.
	* patch1: File deleted.

1993-01-05  Morten Welinder  ([e-mail])

	* mainmake: New file, makefile for the main directory.

	* patch1: New file.  Context diff to turn src/makefile.in into
	a msdos version called makefile.

	* emacs.pif: New file, program information file for Emacs under
	Windows.  (This file contains non-printable characters.)

	* emacs.ico: New file, icon for Emacs under Windows.  It's so ugly
	that someone is bound to create a better.  Mail uuencoded icons
	to [e-mail], but be prepared to sign a copyright disclaimer.
	(This file contains non-printable characters.)

	* sed3.inp: New file for changing lib-src/makefile.in into 
	lib-src/makefile.

	* sed2.inp: New file for changing src/config.h-in into src/config.h

	* sed1.inp: New file for changing src/makefile.in.in into src/makefile