annotate lisp/mail/mail-extr.el @ 8529:464f7abd0b26

*** empty log message ***

;;; mail-extr.el --- extract full name and address from RFC 822 mail header.

;; Copyright (C) 1991, 1992, 1993, 1994 Free Software Foundation, Inc.

;; Author: Joe Wells <[e-mail]>
;; Maintainer: Jamie Zawinski <[e-mail]>
;; Version: 1.8
;; Keywords: mail

;; This file is part of GNU Emacs.

;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING.  If not, write to
;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.

;;; Commentary:

;; The entry point of this code is
;;
;;    mail-extract-address-components: (address)
;;  
;;    Given an RFC-822 ADDRESS, extract full name and canonical address.
;;    Returns a list of the form (FULL-NAME CANONICAL-ADDRESS).
;;    If no name can be extracted, FULL-NAME will be nil.
;;    ADDRESS may be a string or a buffer.  If it is a buffer, the visible 
;;     (narrowed) portion of the buffer will be interpreted as the address.
;;     (This feature exists so that the clever caller might be able to avoid
;;     consing a string.)
;;    If ADDRESS contains more than one RFC-822 address, only the first is
;;     returned.
;;
;; This code is more correct (and more heuristic) parser than the code in
;; rfc822.el.  And despite its size, it's fairly fast.
;;
;; There are two main benefits:
;;
;; 1. Higher probability of getting the correct full name for a human than
;;    any other package we know of.  (On the other hand, it will cheerfully
;;    mangle non-human names/comments.)
;; 2. Address part is put in a canonical form.
;;
;; The interface is not yet carved in stone; please give us suggestions.
;;
;; We have an extensive test-case collection of funny addresses if you want to
;; work with the code.  Developing this code requires frequent testing to
;; make sure you're not breaking functionality.  The test cases aren't included
;; because they are over 100K.
;;
;; If you find an address that mail-extr fails on, please send it to the 
;; maintainer along with what you think the correct results should be.  We do
;; not consider it a bug if mail-extr mangles a comment that does not
;; correspond to a real human full name, although we would prefer that 
;; mail-extr would return the comment as-is.
;;
;; Features:
;;
;; * Full name handling:
;;
;;   * knows where full names can be found in an address.
;;   * avoids using empty comments and quoted text.
;;   * extracts full names from mailbox names.
;;   * recognizes common formats for comments after a full name.
;;   * puts a period and a space after each initial.
;;   * understands & referring to the mailbox name, capitalized.
;;   * strips name prefixes like "Prof.", etc.
;;   * understands what characters can occur in names (not just letters).
;;   * figures out middle initial from mailbox name.
;;   * removes funny nicknames.
;;   * keeps suffixes such as Jr., Sr., III, etc.
;;   * reorders "Last, First" type names.
;;
;; * Address handling:
;;
;;   * parses rfc822 quoted text, comments, and domain literals.
;;   * parses rfc822 multi-line headers.
;;   * does something reasonable with rfc822 GROUP addresses.
;;   * handles many rfc822 noncompliant and garbage addresses.
;;   * canonicalizes addresses (after stripping comments/phrases outside <>).
;;     * converts ! addresses into .UUCP and %-style addresses.
;;     * converts rfc822 ROUTE addresses to %-style addresses.
;;     * truncates %-style addresses at leftmost fully qualified domain name.
;;     * handles local relative precedence of ! vs. % and @ (untested).
;;
;; It does almost no string creation.  It primarily uses the built-in
;; parsing routines with the appropriate syntax tables.  This should
;; result in greater speed.
;;
;; TODO:
;;
;; * handle all test cases.  (This will take forever.)
;; * software to pick the correct header to use (eg., "Senders-Name:").
;; * multiple addresses in the "From:" header (almost all of the necessary
;;   code is there).
;; * flag to not treat `,' as an address separator.  (This is useful when
;;   there is a "From:" header but no "Sender:" header, because then there
;;   is only allowed to be one address.)
;; * mailbox name does not necessarily contain full name.
;; * fixing capitalization when it's all upper or lowercase.  (Hard!)
;; * some of the domain literal handling is missing.  (But I've never even
;;   seen one of these in a mail address, so maybe no big deal.)
;; * arrange to have syntax tables byte-compiled.
;; * speed hacks.
;; * delete unused variables.
;; * arrange for testing with different relative precedences of ! vs. @
;;   and %.
;; * insert documentation strings!
;; * handle X.400-gatewayed addresses according to RFC 1148.

;;; Change Log: 
;; 
;; Thu Feb 17 17:57:33 1994  Jamie Zawinski ([e-mail])
;;
;;	* merged with jbw's latest version
;;
;; Wed Feb  9 21:56:27 1994  Jamie Zawinski ([e-mail])
;;
;;      * high-bit chars in comments weren't treated as word syntax
;;
;; Sat Feb  5 03:13:40 1994  Jamie Zawinski ([e-mail])
;;
;;      * call replace-match with fixed-case arg
;;
;; Thu Dec 16 21:56:45 1993  Jamie Zawinski ([e-mail])
;;
;;      * some more cleanup, doc, added provide
;;
;; Tue Mar 23 21:23:18 1993  Joe Wells  (jbw at csd.bu.edu)
;; 
;; 	* Made mail-full-name-prefixes a user-customizable variable.
;;        Allow passing the address as a buffer as well as as a string.
;;        Allow [ and ] as name characters (Finnish character set).
;; 
;; Mon Mar 22 21:20:56 1993  Joe Wells  (jbw at bigbird.bu.edu)
;; 
;; 	* Handle "null" addresses.  Handle = used for spacing in mailbox
;; 	  name.  Fix bug in handling of ROUTE-ADDR-type addresses that are
;; 	  missing their brackets.  Handle uppercase "JR".  Extract full
;; 	  names from X.400 addresses encoded in RFC-822.  Fix bug in
;;        handling of multiple addresses where first has trailing comment.
;;        Handle more kinds of telephone extension lead-ins.
;; 
;; Mon Mar 22 20:16:57 1993  Joe Wells  (jbw at bigbird.bu.edu)
;; 
;; 	* Handle HZ encoding for embedding GB encoded chinese characters.
;; 
;; Mon Mar 22 00:46:12 1993  Joe Wells  (jbw at bigbird.bu.edu)
;; 
;; 	* Fixed too broad matching of ham radio call signs.  Fixed bug in
;; 	  handling an unmatched ' in a name string.  Enhanced recognition
;; 	  of when . in the mailbox name terminates the name portion.
;; 	  Narrowed conversion of . to space to only the necessary
;; 	  situation.  Deal with VMS's stupid date stamps.  Handle a unique
;; 	  way of introducing an alternate address.  Fixed spacing bug I
;; 	  introduced in switching last name order.  Fixed bug in handling
;; 	  address with ! and % but no @.  Narrowed the cases in which
;; 	  certain trailing words are discarded.
;; 
;; Sun Mar 21 21:41:06 1993  Joe Wells  (jbw at bigbird.bu.edu)
;; 
;; 	* Fixed bugs in handling GROUP addresses.  Certain words in the
;; 	  middle of a name no longer terminate it.  Handle LISTSERV list
;;        names.  Ignore comment field containing mailbox name.
;; 
;; Sun Mar 21 14:39:38 1993  Joe Wells  (jbw at bigbird.bu.edu)
;; 
;; 	* Moved variant-method code back into main function.  Handle
;; 	underscores as spaces in comments.  Handle leading nickname.  Add
;; 	flag to ignore single-word names.  Other changes.
;; 
;; Mon Feb  1 22:23:31 1993  Joe Wells  (jbw at bigbird.bu.edu)
;; 
;; 	* Added in changes by Rod Whitby and Jamie Zawinski.  This
;;        includes the flag mail-extr-guess-middle-initial and the fix for
;;        handling multiple addresses correctly.  (Whitby just changed
;;	  a > to a <.)
;; 
;; Mon Apr  6 23:59:09 1992  Joe Wells  (jbw at bigbird.bu.edu)
;; 
;; 	* Cleaned up some more.  Release version 1.0 to world.
;; 
;; Sun Apr  5 19:39:08 1992  Joe Wells  (jbw at bigbird.bu.edu)
;; 
;; 	* Cleaned up full name extraction extensively.
;; 
;; Sun Feb  2 14:45:24 1992  Joe Wells  (jbw at bigbird.bu.edu)
;; 
;; 	* Total rewrite.  Integrated mail-canonicalize-address into
;; 	mail-extract-address-components.  Now handles GROUP addresses more
;; 	or less correctly.  Better handling of lots of different cases.
;; 
;; Fri Jun 14 19:39:50 1991
;;	* Created.

;;; Code:


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; User configuration variable definitions.
;;

(defvar mail-extr-guess-middle-initial nil
  "*Whether to try to guess middle initial from mail address.
If true, then when we see an address like \"John Smith <[e-mail]>\"
we will assume that \"John Q. Smith\" is the fellow's name.")

(defvar mail-extr-ignore-single-names t
  "*Whether to ignore a name that is just a single word.
If true, then when we see an address like \"Idiot <[e-mail]>\"
we will act as though we couldn't find a full name in the address.")

;; Matches a leading title that is not part of the name (does not
;; contribute to uniquely identifying the person).
(defvar mail-extr-full-name-prefixes
  (purecopy
   "\\(Prof\\|D[Rr]\\|Mrs?\\|Rev\\|Rabbi\\|SysOp\\|LCDR\\)\\.?[ \t\n]")
  "*Matches prefixes to the full name that identify a person's position.
These are stripped from the full name because they do not contribute to
uniquely identifying the person.")

(defvar mail-extr-@-binds-tighter-than-! nil
  "*Whether the local mail transport agent looks at ! before @.")

(defvar mail-extr-mangle-uucp nil
  "*Whether to throw away information in UUCP addresses
by translating things like \"foo!bar!baz@host\" into \"[e-mail]\".")

;;----------------------------------------------------------------------
;; what orderings are meaningful?????
;;(defvar mail-operator-precedence-list '(?! ?% ?@))
;; Right operand of a % or a @ must be a domain name, period.  No other
;; operators allowed.  Left operand of a @ is an address relative to that
;; site.

;; Left operand of a ! must be a domain name.  Right operand is an
;; arbitrary address.
;;----------------------------------------------------------------------



;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Constant definitions.
;;

;;           Codes in
;; Names in  ISO 8859-1 Name
;; ISO 10XXX ISO 8859-2 in
;; ISO 6937  ISO 10646  RFC            Swedish
;; etc.      Hex Oct    1345 TeX Split ASCII Description
;; --------- ---------- ---- --- ----- ----- -------------------------------
;; %a        E4  344    a:   \"a ae    {     latin small   a + diaeresis   d
;; %o        F6  366    o:   \"o oe    |     latin small   o + diaeresis   v
;; @a        E5  345    aa   \oa aa    }     latin small   a + ring above  e
;; %u        FC  374    u:   \"u ue    ~     latin small   u + diaeresis   |
;; /e        E9  351    e'   \'e       `     latin small   e + acute       i
;; %A        C4  304    A:   \"A AE    [     latin capital a + diaeresis   D
;; %O        D6  326    O:   \"O OE    \     latin capital o + diaeresis   V
;; @A        C5  305    AA   \oA AA    ]     latin capital a + ring above  E
;; %U        DC  334    U:   \"U UE    ^     latin capital u + diaeresis   \
;; /E        C9  311    E'   \'E       @     latin capital e + acute       I

;; NOTE: @a and @A are not in ISO 8859-2 (the codes mentioned above invoke
;; /l and /L).  Some of this data was retrieved from
;; [e-mail].

;; Any character that can occur in a name, not counting characters that
;; separate parts of a multipart name (hyphen and period).
;; Yes, there are weird people with digits in their names.
;; You will also notice the consideration for the
;; Swedish/Finnish/Norwegian character set.
;; #### (go to \376 instead of \377 to work around bug in search.c...)
(defconst mail-extr-all-letters-but-separators
  (purecopy "][A-Za-z{|}'~0-9`\200-\376"))

;; Any character that can occur in a name in an RFC822 address including
;; the separator (hyphen and possibly period) for multipart names.
;; #### should . be in here?
(defconst mail-extr-all-letters
  (purecopy (concat mail-extr-all-letters-but-separators "---")))

;; Any character that can start a name.
;; Keep this set as minimal as possible.
(defconst mail-extr-first-letters (purecopy "A-Za-z"))

;; Any character that can end a name.
;; Keep this set as minimal as possible.
(defconst mail-extr-last-letters (purecopy "[A-Za-z`'."))

(defconst mail-extr-leading-garbage
  (purecopy (format "[^%s]+" mail-extr-first-letters)))

;; (defconst mail-extr-non-name-chars 
;;   (purecopy (concat "^" mail-extr-all-letters ".")))
;; (defconst mail-extr-non-begin-name-chars
;;   (purecopy (concat "^" mail-extr-first-letters)))
;; (defconst mail-extr-non-end-name-chars
;;   (purecopy (concat "^" mail-extr-last-letters)))

;; Matches an initial not followed by both a period and a space. 
;; (defconst mail-extr-bad-initials-pattern
;;   (purecopy 
;;    (format "\\(\\([^%s]\\|\\`\\)[%s]\\)\\(\\.\\([^ ]\\)\\| \\|\\([^%s .]\\)\\|\\'\\)"
;;            mail-extr-all-letters mail-extr-first-letters mail-extr-all-letters)))

;; Matches periods used instead of spaces.  Must not match the period
;; following an initial.
(defconst mail-extr-bad-dot-pattern
  (purecopy
   (format "\\([%s][%s]\\)\\.+\\([%s]\\)"
	   mail-extr-all-letters
	   mail-extr-last-letters
	   mail-extr-first-letters)))

;; Matches an embedded or leading nickname that should be removed.
;; (defconst mail-extr-nickname-pattern
;;   (purecopy
;;    (format "\\([ .]\\|\\`\\)[\"'`\[\(]\\([ .%s]+\\)[\]\"'\)] "
;;            mail-extr-all-letters)))

;; Matches the occurrence of a generational name suffix, and the last
;; character of the preceding name.  This is important because we want to
;; keep such suffixes: they help to uniquely identify the person.
;; *** Perhaps this should be a user-customizable variable.  However, the
;; *** regular expression is fairly tricky to alter, so maybe not.
(defconst mail-extr-full-name-suffix-pattern
  (purecopy
   (format
    "\\(,? ?\\([JjSs][Rr]\\.?\\|V?I+V?\\)\\)\\([^%s]\\([^%s]\\|\\'\\)\\|\\'\\)"
    mail-extr-all-letters mail-extr-all-letters)))

(defconst mail-extr-roman-numeral-pattern (purecopy "V?I+V?\\b"))

;; Matches a trailing uppercase (with other characters possible) acronym.
;; Must not match a trailing uppercase last name or trailing initial
(defconst mail-extr-weird-acronym-pattern
  (purecopy "\\([A-Z]+[-_/]\\|[A-Z][A-Z][A-Z]?\\b\\)"))
      
;; Matches a mixed-case or lowercase name (not an initial).
;; #### Match Latin1 lower case letters here too?
;; (defconst mail-extr-mixed-case-name-pattern
;;   (purecopy
;;    (format
;;     "\\b\\([a-z][%s]*[%s]\\|[%s][%s]*[a-z][%s]*[%s]\\|[%s][%s]*[a-z]\\)"
;;     mail-extr-all-letters mail-extr-last-letters
;;     mail-extr-first-letters mail-extr-all-letters mail-extr-all-letters
;;     mail-extr-last-letters mail-extr-first-letters mail-extr-all-letters)))

;; Matches a trailing alternative address.
;; #### Match Latin1 letters here too?
;; #### Match _ before @ here too?  
(defconst mail-extr-alternative-address-pattern
  (purecopy "\\(aka *\\)?[a-zA-Z.]+[!@][a-zA-Z.]"))

;; Matches a variety of trailing comments not including comma-delimited
;; comments.
(defconst mail-extr-trailing-comment-start-pattern
  (purecopy " [-{]\\|--\\|[+@#></\;]"))

;; Matches a name (not an initial).
;; This doesn't force a word boundary at the end because sometimes a
;; comment is separated by a `-' with no preceding space.
(defconst mail-extr-name-pattern
  (purecopy (format "\\b[%s][%s]*[%s]"
		    mail-extr-first-letters
		    mail-extr-all-letters
		    mail-extr-last-letters)))

(defconst mail-extr-initial-pattern
  (purecopy (format "\\b[%s]\\([. ]\\|\\b\\)" mail-extr-first-letters)))

;; Matches a single name before a comma.
;; (defconst mail-extr-last-name-first-pattern
;;   (purecopy (concat "\\`" mail-extr-name-pattern ",")))

;; Matches telephone extensions.
(defconst mail-extr-telephone-extension-pattern
  (purecopy
   "\\(\\([Ee]xt\\|\\|[Tt]ph\\|[Tt]el\\|[Xx]\\).?\\)? *\\+?[0-9][- 0-9]+"))

;; Matches ham radio call signs.
;; Help from: Mat Maessen N2NJZ <[e-mail]>, Mark Feit
;; <[e-mail]>, Michael Covington <[e-mail]>.
;; Examples: DX504 DX515 K5MRU K8DHK KA9WGN KA9WGN KD3FU KD6EUI KD6HBW
;; KE9TV KF0NV N1API N3FU N3GZE N3IGS N4KCC N7IKQ N9HHU W4YHF W6ANK WA2SUH
;; WB7VZI N2NJZ NR3G KJ4KK AB4UM AL7NI KH6OH WN3KBT N4TMI W1A N0NZO
(defconst mail-extr-ham-call-sign-pattern
  (purecopy "\\b\\(DX[0-9]+\\|[AKNW][A-Z]?[0-9][A-Z][A-Z]?[A-Z]?\\)"))

;; Possible trailing suffixes: "\\(/\\(KT\\|A[AEG]\\|[R0-9]\\)\\)?"
;; /KT == Temporary Technician (has CSC but not "real" license)
;; /AA == Temporary Advanced
;; /AE == Temporary Extra
;; /AG == Temporary General
;; /R  == repeater
;; /#  == stations operating out of home district
;; I don't include these in the regexp above because I can't imagine
;; anyone putting them with their name in an e-mail address.

;; Matches normal single-part name
(defconst mail-extr-normal-name-pattern
  (purecopy (format "\\b[%s][%s]+[%s]"
		    mail-extr-first-letters
		    mail-extr-all-letters-but-separators
		    mail-extr-last-letters)))

;; Matches a single word name.
;; (defconst mail-extr-one-name-pattern
;;   (purecopy (concat "\\`" mail-extr-normal-name-pattern "\\'")))
  
;; Matches normal two names with missing middle initial
;; The first name is not allowed to have a hyphen because this can cause
;; false matches where the "middle initial" is actually the first letter
;; of the second part of the first name.
(defconst mail-extr-two-name-pattern
  (purecopy
   (concat "\\`\\(" mail-extr-normal-name-pattern
	   "\\|" mail-extr-initial-pattern
	   "\\) +\\(" mail-extr-name-pattern "\\)\\(,\\|\\'\\)")))

(defconst mail-extr-listserv-list-name-pattern
  (purecopy "Multiple recipients of list \\([-A-Z]+\\)"))

(defconst mail-extr-stupid-vms-date-stamp-pattern
  (purecopy
   "[0-9][0-9]-[JFMASOND][aepuco][nbrylgptvc]-[0-9][0-9][0-9][0-9] [0-9]+ *"))

;;; HZ -- GB (PRC Chinese character encoding) in ASCII embedding protocol
;;
;; In ASCII mode, a byte is interpreted as an ASCII character, unless a '~' is
;; encountered. The character '~' is an escape character. By convention, it
;; must be immediately followed ONLY by '~', '{' or '\n' (<LF>), with the
;; following special meaning.
;; 
;; o The escape sequence '~~' is interpreted as a '~'.
;; o The escape-to-GB sequence '~{' switches the mode from ASCII to GB.
;; o The escape sequence '~\n' is a line-continuation marker to be consumed
;;   with no output produced.
;; 
;; In GB mode, characters are interpreted two bytes at a time as (pure) GB
;; codes until the escape-from-GB code '~}' is read. This code switches the
;; mode from GB back to ASCII.  (Note that the escape-from-GB code '~}'
;; ($7E7D) is outside the defined GB range.)
(defconst mail-extr-hz-embedded-gb-encoded-chinese-pattern
  (purecopy "~{\\([^~].\\|~[^\}]\\)+~}"))

;; The leading optional lowercase letters are for a bastardized version of
;; the encoding, as is the optional nature of the final slash.
(defconst mail-extr-x400-encoded-address-pattern
  (purecopy "[a-z]?[a-z]?\\(/[A-Za-z]+\\(\\.[A-Za-z]+\\)?=[^/]+\\)+/?\\'"))

(defconst mail-extr-x400-encoded-address-field-pattern-format
  (purecopy "/%s=\\([^/]+\\)\\(/\\|\\'\\)"))

(defconst mail-extr-x400-encoded-address-surname-pattern
  ;; S stands for Surname (family name).
  (purecopy
   (format mail-extr-x400-encoded-address-field-pattern-format "[Ss]")))

(defconst mail-extr-x400-encoded-address-given-name-pattern
  ;; G stands for Given name.
  (purecopy
   (format mail-extr-x400-encoded-address-field-pattern-format "[Gg]")))

(defconst mail-extr-x400-encoded-address-full-name-pattern
  ;; PN stands for Personal Name.  When used it represents the combination
  ;; of the G and S fields.
  ;; "The one system I used having this field asked it with the prompt
  ;; `Personal Name'.  But they mapped it into G and S on outgoing real
  ;; X.400 addresses.  As they mapped G and S into PN on incoming..."
  (purecopy
   (format mail-extr-x400-encoded-address-field-pattern-format "[Pp][Nn]")))



;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Syntax tables used for quick parsing.
;;

(defconst mail-extr-address-syntax-table (make-syntax-table))
(defconst mail-extr-address-comment-syntax-table (make-syntax-table))
(defconst mail-extr-address-domain-literal-syntax-table (make-syntax-table))
(defconst mail-extr-address-text-comment-syntax-table (make-syntax-table))
(defconst mail-extr-address-text-syntax-table (make-syntax-table))
(mapcar
 (function
  (lambda (pair)
    (let ((syntax-table (symbol-value (car pair))))
      (mapcar
       (function
	(lambda (item)
	  (if (eq 2 (length item))
	      ;; modifying syntax of a single character
	      (modify-syntax-entry (car item) (car (cdr item)) syntax-table)
	    ;; modifying syntax of a range of characters
	    (let ((char (nth 0 item))
		  (bound (nth 1 item))
		  (syntax (nth 2 item)))
	      (while (<= char bound)
		(modify-syntax-entry char syntax syntax-table)
		(setq char (1+ char)))))))
       (cdr pair)))))
 '((mail-extr-address-syntax-table
    (?\000 ?\037 "w")			;control characters
    (?\040	 " ")			;SPC
    (?! ?~	 "w")			;printable characters
    (?\177	 "w")			;DEL
    (?\200 ?\377 "w")			;high-bit-on characters
    (?\240	 " ")			;nobreakspace
    (?\t " ")
    (?\r " ")
    (?\n " ")
    (?\( ".")
    (?\) ".")
    (?<  ".")
    (?>  ".")
    (?@  ".")
    (?,  ".")
    (?\; ".")
    (?:  ".")
    (?\\ "\\")
    (?\" "\"")
    (?.  ".")
    (?\[ ".")
    (?\] ".")
    ;; % and ! aren't RFC822 characters, but it is convenient to pretend
    (?%  ".")
    (?!  ".") ;; this needs to be word-constituent when not in .UUCP mode
    )
   (mail-extr-address-comment-syntax-table
    (?\000 ?\377 "w")
    (?\040 " ")
    (?\240 " ")
    (?\t " ")
    (?\r " ")
    (?\n " ")
    (?\( "\(\)")
    (?\) "\)\(")
    (?\\ "\\"))
   (mail-extr-address-domain-literal-syntax-table
    (?\000 ?\377 "w")
    (?\040 " ")
    (?\240 " ")
    (?\t " ")
    (?\r " ")
    (?\n " ")
    (?\[ "\(\]")			;??????
    (?\] "\)\[")			;??????
    (?\\ "\\"))
   (mail-extr-address-text-comment-syntax-table
    (?\000 ?\377 "w")
    (?\040 " ")
    (?\240 " ")
    (?\t " ")
    (?\r " ")
    (?\n " ")
    (?\( "\(\)")
    (?\) "\)\(")
    (?\[ "\(\]")
    (?\] "\)\[")
    (?\{ "\(\}")
    (?\} "\)\{")
    (?\\ "\\")
    (?\" "\"")
    ;; (?\' "\)\`")
    ;; (?\` "\(\'")
    )
   (mail-extr-address-text-syntax-table
    (?\000 ?\177 ".")
    (?\200 ?\377 "w")
    (?\040 " ")
    (?\t " ")
    (?\r " ")
    (?\n " ")
    (?A ?Z "w")
    (?a ?z "w")
    (?-    "w")
    (?\}   "w")
    (?\{   "w")
    (?|    "w")
    (?\'   "w")
    (?~    "w")
    (?0 ?9 "w"))
   ))


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Utility functions and macros.
;;

(defmacro mail-extr-delete-char (n)
  ;; in v19, delete-char is compiled as a function call, but delete-region
  ;; is byte-coded, so it's much much faster.
  (list 'delete-region '(point) (list '+ '(point) n)))

(defmacro mail-extr-skip-whitespace-forward ()
  ;; v19 fn skip-syntax-forward is more tasteful, but not byte-coded.
  '(skip-chars-forward " \t\n\r\240"))

(defmacro mail-extr-skip-whitespace-backward ()
  ;; v19 fn skip-syntax-backward is more tasteful, but not byte-coded.
  '(skip-chars-backward " \t\n\r\240"))


(defmacro mail-extr-undo-backslash-quoting (beg end)
  (`(save-excursion
      (save-restriction
	(narrow-to-region (, beg) (, end))
	(goto-char (point-min))
	;; undo \ quoting
	(while (search-forward "\\" nil t)
	  (mail-extr-delete-char -1)
	  (or (eobp)
	      (forward-char 1))
	  )))))

(defmacro mail-extr-nuke-char-at (pos)
  (` (save-excursion
       (goto-char (, pos))
       (mail-extr-delete-char 1)
       (insert ?\ ))))

(put 'mail-extr-nuke-outside-range
     'edebug-form-spec '(symbolp &optional form form atom))

(defmacro mail-extr-nuke-outside-range (list-symbol
					beg-symbol end-symbol
					&optional no-replace)
  ;; LIST-SYMBOL names a variable holding a list of buffer positions
  ;; BEG-SYMBOL and END-SYMBOL name variables delimiting a range
  ;; Each element of LIST-SYMBOL which lies outside of the range is
  ;;  deleted from the list.
  ;; Unless NO-REPLACE is true, at each of the positions in LIST-SYMBOL
  ;;  which lie outside of the range, one character at that position is
  ;;  replaced with a SPC.
  (or (memq no-replace '(t nil))
      (error "no-replace must be t or nil, evalable at macroexpand-time."))
  (` (let ((temp (, list-symbol))
	   ch)
       (while temp
	 (setq ch (car temp))
	 (cond ((or (> ch (, end-symbol))
		    (< ch (, beg-symbol)))
		(,@ (if no-replace
			nil
		      (` ((mail-extr-nuke-char-at ch)))))
		(setcar temp nil)))
	 (setq temp (cdr temp)))
       (setq (, list-symbol) (delq nil (, list-symbol))))))

(defun mail-extr-demarkerize (marker)
  ;; if arg is a marker, destroys the marker, then returns the old value.
  ;; otherwise returns the arg.
  (if (markerp marker)
      (let ((temp (marker-position marker)))
	(set-marker marker nil)
	temp)
    marker))

(defun mail-extr-markerize (pos)
  ;; coerces pos to a marker if non-nil.
  (if (or (markerp pos) (null pos))
      pos
    (copy-marker pos)))

(defmacro mail-extr-last (list)
  ;; Returns last element of LIST.
  ;; Could be a subst.
  (` (let ((list (, list)))
       (while (not (null (cdr list)))
	 (setq list (cdr list)))
       (car list))))
  
(defmacro mail-extr-safe-move-sexp (arg)
  ;; Safely skip over one balanced sexp, if there is one.  Return t if success.
  (` (condition-case error
	 (progn
	   (goto-char (scan-sexps (point) (, arg)))
	   t)
       (error
	;; #### kludge kludge kludge kludge kludge kludge kludge !!!
	(if (string-equal (nth 1 error) "Unbalanced parentheses")
	    nil
	  (while t
	    (signal (car error) (cdr error))))))))

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; The main function to grind addresses
;;

(defvar disable-initial-guessing-flag)	; dynamic assignment
(defvar cbeg)				; dynamic assignment
(defvar cend)				; dynamic assignment

;;;###autoload
(defun mail-extract-address-components (address)
  "Given an RFC-822 ADDRESS, extract full name and canonical address.
Returns a list of the form (FULL-NAME CANONICAL-ADDRESS).
If no name can be extracted, FULL-NAME will be nil.
ADDRESS may be a string or a buffer.  If it is a buffer, the visible 
 (narrowed) portion of the buffer will be interpreted as the address.
 (This feature exists so that the clever caller might be able to avoid
 consing a string.)
If ADDRESS contains more than one RFC-822 address, only the first is
 returned.  Some day this function may be extended to extract multiple
 addresses, or perhaps return the position at which parsing stopped."
  (let ((canonicalization-buffer (get-buffer-create " *canonical address*"))
	(extraction-buffer (get-buffer-create " *extract address components*"))
	char
;;	multiple-addresses
	<-pos >-pos @-pos :-pos ,-pos !-pos %-pos \;-pos
	group-:-pos group-\;-pos route-addr-:-pos
	record-pos-symbol
	first-real-pos last-real-pos
	phrase-beg phrase-end
	cbeg cend			; dynamically set from -voodoo
	quote-beg quote-end
	atom-beg atom-end
	mbox-beg mbox-end
	\.-ends-name
	temp
;;	name-suffix
	fi mi li			; first, middle, last initial
	saved-%-pos saved-!-pos saved-@-pos
	domain-pos \.-pos insert-point
;;	mailbox-name-processed-flag
	disable-initial-guessing-flag	; dynamically set from -voodoo
	)
    
    (save-excursion
      (set-buffer extraction-buffer)
      (fundamental-mode)
      (kill-all-local-variables)
      (buffer-disable-undo extraction-buffer)
      (set-syntax-table mail-extr-address-syntax-table)
      (widen)
      (erase-buffer)
      (setq case-fold-search nil)
      
      ;; Insert extra space at beginning to allow later replacement with <
      ;; without having to move markers.
      (insert ?\ )

      ;; Insert the address itself.
      (cond ((stringp address)
	     (insert address))
	    ((bufferp address)
	     (insert-buffer-substring address))
	    (t
	     (error "Illegal address: %s" address)))
      
      ;; stolen from rfc822.el
      ;; Unfold multiple lines.
      (goto-char (point-min))
      (while (re-search-forward "\\([^\\]\\(\\\\\\\\\\)*\\)\n[ \t]" nil t)
	(replace-match "\\1 " t))
      
      ;; first pass grabs useful information about address
      (goto-char (point-min))
      (while (progn
	       (mail-extr-skip-whitespace-forward)
	       (not (eobp)))
	(setq char (char-after (point)))
	(or first-real-pos
	    (if (not (eq char ?\())
		(setq first-real-pos (point))))
	(cond
	 ;; comment
	 ((eq char ?\()
	  (set-syntax-table mail-extr-address-comment-syntax-table)
	  ;; only record the first non-empty comment's position
	  (if (and (not cbeg)
		   (save-excursion
		     (forward-char 1)
		     (mail-extr-skip-whitespace-forward)
		     (not (eq ?\) (char-after (point))))))
	      (setq cbeg (point)))
	  ;; TODO: don't record if unbalanced
	  (or (mail-extr-safe-move-sexp 1)
	      (forward-char 1))
	  (set-syntax-table mail-extr-address-syntax-table)
	  (if (and cbeg
		   (not cend))
	      (setq cend (point))))
	 ;; quoted text
	 ((eq char ?\")
	  ;; only record the first non-empty quote's position
	  (if (and (not quote-beg)
		   (save-excursion
		     (forward-char 1)
		     (mail-extr-skip-whitespace-forward)
		     (not (eq ?\" (char-after (point))))))
	      (setq quote-beg (point)))
	  ;; TODO: don't record if unbalanced
	  (or (mail-extr-safe-move-sexp 1)
	      (forward-char 1))
	  (if (and quote-beg
		   (not quote-end))
	      (setq quote-end (point))))
	 ;; domain literals
	 ((eq char ?\[)
	  (set-syntax-table mail-extr-address-domain-literal-syntax-table)
	  (or (mail-extr-safe-move-sexp 1)
	      (forward-char 1))
	  (set-syntax-table mail-extr-address-syntax-table))
	 ;; commas delimit addresses when outside < > pairs.
	 ((and (eq char ?,)
	       (or (and (null <-pos)
			;; Handle ROUTE-ADDR address that is missing its <.
			(not (eq ?@ (char-after (1+ (point))))))
		   (and >-pos
			;; handle weird munged addresses
			;; BUG FIX: This test was reversed.  Thanks to the
			;; brilliant Rod Whitby <[e-mail]>
			;; for discovering this!
			(< (mail-extr-last <-pos) (car >-pos)))))
;; It'd be great if some day this worked, but for now, punt.
;;	  (setq multiple-addresses t)
;;	  ;; *** Why do I want this:
;;	  (mail-extr-delete-char 1)
;;	  (narrow-to-region (point-min) (point))
	  (delete-region (point) (point-max))
	  (setq char ?\() ; HAVE I NO SHAME??
	  )
	 ;; record the position of various interesting chars, determine
	 ;; legality later.
	 ((setq record-pos-symbol
		(cdr (assq char
			   '((?< . <-pos) (?> . >-pos) (?@ . @-pos)
			     (?: . :-pos) (?, . ,-pos) (?! . !-pos)
			     (?% . %-pos) (?\; . \;-pos)))))
	  (set record-pos-symbol
	       (cons (point) (symbol-value record-pos-symbol)))
	  (forward-char 1))
	 ((eq char ?.)
	  (forward-char 1))
	 ((memq char '(
		       ;; comment terminator illegal
		       ?\)
		       ;; domain literal terminator illegal
		       ?\]
		       ;; \ allowed only within quoted strings,
		       ;; domain literals, and comments
		       ?\\
		       ))
	  (mail-extr-nuke-char-at (point))
	  (forward-char 1))
	 (t
	  (forward-word 1)))
	(or (eq char ?\()
	    ;; At the end of first address of a multiple address header.
	    (and (eq char ?,)
		 (eobp))
	    (setq last-real-pos (point))))
      
      ;; Use only the leftmost <, if any.  Replace all others with spaces.
      (while (cdr <-pos)
	(mail-extr-nuke-char-at (car <-pos))
	(setq <-pos (cdr <-pos)))
      
      ;; Use only the rightmost >, if any.  Replace all others with spaces.
      (while (cdr >-pos)
	(mail-extr-nuke-char-at (nth 1 >-pos))
	(setcdr >-pos (nthcdr 2 >-pos)))
      
      ;; If multiple @s and a :, but no < and >, insert around buffer.
      ;; Example: @foo.bar.dom,@xxx.yyy.zzz:[e-mail]
      ;; This commonly happens on the UUCP "From " line.  Ugh.
      (cond ((and (> (length @-pos) 1)
		  (eq 1 (length :-pos))	;TODO: check if between last two @s
		  (not \;-pos)
		  (not <-pos))
	     (goto-char (point-min))
	     (mail-extr-delete-char 1)
	     (setq <-pos (list (point)))
	     (insert ?<)))
      
      ;; If < but no >, insert > in rightmost possible position
      (cond ((and <-pos
		  (null >-pos))
	     (goto-char (point-max))
	     (setq >-pos (list (point)))
	     (insert ?>)))
      
      ;; If > but no <, replace > with space.
      (cond ((and >-pos
		  (null <-pos))
	     (mail-extr-nuke-char-at (car >-pos))
	     (setq >-pos nil)))

      ;; Turn >-pos and <-pos into non-lists
      (setq >-pos (car >-pos)
	    <-pos (car <-pos))
      
      ;; Trim other punctuation lists of items outside < > pair to handle
      ;; stupid MTAs.
      (cond (<-pos			; don't need to check >-pos also
	     ;; handle bozo software that violates RFC 822 by sticking
	     ;; punctuation marks outside of a < > pair
	     (mail-extr-nuke-outside-range @-pos <-pos >-pos t)
	     ;; RFC 822 says nothing about these two outside < >, but
	     ;; remove those positions from the lists to make things
	     ;; easier.
	     (mail-extr-nuke-outside-range !-pos <-pos >-pos t)
	     (mail-extr-nuke-outside-range %-pos <-pos >-pos t)))
      
      ;; Check for : that indicates GROUP list and for : part of
      ;; ROUTE-ADDR spec.
      ;; Can't possibly be more than two :.  Nuke any extra.
      (while :-pos
	(setq temp (car :-pos)
	      :-pos (cdr :-pos))
	(cond ((and <-pos >-pos
		    (> temp <-pos)
		    (< temp >-pos))
	       (if (or route-addr-:-pos
		       (< (length @-pos) 2)
		       (> temp (car @-pos))
		       (< temp (nth 1 @-pos)))
		   (mail-extr-nuke-char-at temp)
		 (setq route-addr-:-pos temp)))
	      ((or (not <-pos)
		   (and <-pos
			(< temp <-pos)))
	       (setq group-:-pos temp))))
      
      ;; Nuke any ; that is in or to the left of a < > pair or to the left
      ;; of a GROUP starting :.  Also, there may only be one ;.
      (while \;-pos
	(setq temp (car \;-pos)
	      \;-pos (cdr \;-pos))
	(cond ((and <-pos >-pos
		    (> temp <-pos)
		    (< temp >-pos))
	       (mail-extr-nuke-char-at temp))
	      ((and (or (not group-:-pos)
			(> temp group-:-pos))
		    (not group-\;-pos))
	       (setq group-\;-pos temp))))
      
      ;; Nuke unmatched GROUP syntax characters.
      (cond ((and group-:-pos (not group-\;-pos))
	     ;; *** Do I really need to erase it?
	     (mail-extr-nuke-char-at group-:-pos)
	     (setq group-:-pos nil)))
      (cond ((and group-\;-pos (not group-:-pos))
	     ;; *** Do I really need to erase it?
	     (mail-extr-nuke-char-at group-\;-pos)
	     (setq group-\;-pos nil)))
      
      ;; Handle junk like ";@host.company.dom" that sendmail adds.
      ;; **** should I remember comment positions?
      (cond
       (group-\;-pos
	;; this is fine for now
	(mail-extr-nuke-outside-range !-pos group-:-pos group-\;-pos t)
	(mail-extr-nuke-outside-range @-pos group-:-pos group-\;-pos t)
	(mail-extr-nuke-outside-range %-pos group-:-pos group-\;-pos t)
	(mail-extr-nuke-outside-range ,-pos group-:-pos group-\;-pos t)
	(and last-real-pos
	     (> last-real-pos (1+ group-\;-pos))
	     (setq last-real-pos (1+ group-\;-pos)))
	;; *** This may be wrong:
        (and cend
             (> cend group-\;-pos)
             (setq cend nil
                   cbeg nil))
	(and quote-end
	     (> quote-end group-\;-pos)
	     (setq quote-end nil
		   quote-beg nil))
	;; This was both wrong and unnecessary:
	;;(narrow-to-region (point-min) group-\;-pos)

	;; *** The entire handling of GROUP addresses seems rather lame.
	;; *** It deserves a complete rethink, except that these addresses
	;; *** are hardly ever seen.
	))
      
      ;; Any commas must be between < and : of ROUTE-ADDR.  Nuke any
      ;; others.
      ;; Hell, go ahead an nuke all of the commas.
      ;; **** This will cause problems when we start handling commas in
      ;; the PHRASE part .... no it won't ... yes it will ... ?????
      (mail-extr-nuke-outside-range ,-pos 1 1)
      
      ;; can only have multiple @s inside < >.  The fact that some MTAs
      ;; put de-bracketed ROUTE-ADDRs in the UUCP-style "From " line is
      ;; handled above.
      
      ;; Locate PHRASE part of ROUTE-ADDR.
      (cond (<-pos
	     (goto-char <-pos)
	     (mail-extr-skip-whitespace-backward)
	     (setq phrase-end (point))
	     (goto-char (or ;;group-:-pos
			    (point-min)))
	     (mail-extr-skip-whitespace-forward)
	     (if (< (point) phrase-end)
		 (setq phrase-beg (point))
	       (setq phrase-end nil))))
      
      ;; handle ROUTE-ADDRS with real ROUTEs.
      ;; If there are multiple @s, then we assume ROUTE-ADDR syntax, and
      ;; any % or ! must be semantically meaningless.
      ;; TODO: do this processing into canonicalization buffer
      (cond (route-addr-:-pos
	     (setq !-pos nil
		   %-pos nil
		   >-pos (copy-marker >-pos)
		   route-addr-:-pos (copy-marker route-addr-:-pos))
	     (goto-char >-pos)
	     (insert-before-markers ?X)
	     (goto-char (car @-pos))
	     (while (setq @-pos (cdr @-pos))
	       (mail-extr-delete-char 1)
	       (setq %-pos (cons (point-marker) %-pos))
	       (insert "%")
	       (goto-char (1- >-pos))
	       (save-excursion
		 (insert-buffer-substring extraction-buffer
					  (car @-pos) route-addr-:-pos)
		 (delete-region (car @-pos) route-addr-:-pos))
	       (or (cdr @-pos)
		   (setq saved-@-pos (list (point)))))
	     (setq @-pos saved-@-pos)
	     (goto-char >-pos)
	     (mail-extr-delete-char -1)
	     (mail-extr-nuke-char-at route-addr-:-pos)
	     (mail-extr-demarkerize route-addr-:-pos)
	     (setq route-addr-:-pos nil
		   >-pos (mail-extr-demarkerize >-pos)
		   %-pos (mapcar 'mail-extr-demarkerize %-pos))))
      
      ;; de-listify @-pos
      (setq @-pos (car @-pos))
      
      ;; TODO: remove comments in the middle of an address
      
      (set-buffer canonicalization-buffer)
      (fundamental-mode)
      (kill-all-local-variables)
      (buffer-disable-undo canonicalization-buffer)
      (set-syntax-table mail-extr-address-syntax-table)
      (setq case-fold-search nil)
      
      (widen)
      (erase-buffer)
      (insert-buffer-substring extraction-buffer)
      
      (if <-pos
	  (narrow-to-region (progn
			      (goto-char (1+ <-pos))
			      (mail-extr-skip-whitespace-forward)
			      (point))
			    >-pos)
	(if (and first-real-pos last-real-pos)
	    (narrow-to-region first-real-pos last-real-pos)
	  ;; ****** Oh no!  What if the address is completely empty!
	  ;; *** Is this correct?
	  (narrow-to-region (point-max) (point-max))
	  ))
      
      (and @-pos %-pos
	   (mail-extr-nuke-outside-range %-pos (point-min) @-pos))
      (and %-pos !-pos
	   (mail-extr-nuke-outside-range !-pos (point-min) (car %-pos)))
      (and @-pos !-pos (not %-pos)
	   (mail-extr-nuke-outside-range !-pos (point-min) @-pos))
      
      ;; Error condition:?? (and %-pos (not @-pos))
      
      ;; WARNING: THIS CODE IS DUPLICATED BELOW.
      (cond ((and %-pos
		  (not @-pos))
	     (goto-char (car %-pos))
	     (mail-extr-delete-char 1)
	     (setq @-pos (point))
	     (insert "@")
	     (setq %-pos (cdr %-pos))))

      (if mail-extr-mangle-uucp
      (cond (!-pos
	     ;; **** I don't understand this save-restriction and the
	     ;; narrow-to-region inside it.  Why did I do that?
	     (save-restriction
	       (cond ((and @-pos
			   mail-extr-@-binds-tighter-than-!)
		      (goto-char @-pos)
		      (setq %-pos (cons (point) %-pos)
			    @-pos nil)
		      (mail-extr-delete-char 1)
		      (insert "%")
		      (setq insert-point (point-max)))
		     (mail-extr-@-binds-tighter-than-!
		      (setq insert-point (point-max)))
		     (%-pos
		      (setq insert-point (mail-extr-last %-pos)
			    saved-%-pos (mapcar 'mail-extr-markerize %-pos)
			    %-pos nil
			    @-pos (mail-extr-markerize @-pos)))
		     (@-pos
		      (setq insert-point @-pos)
		      (setq @-pos (mail-extr-markerize @-pos)))
		     (t
		      (setq insert-point (point-max))))
	       (narrow-to-region (point-min) insert-point)
	       (setq saved-!-pos (car !-pos))
	       (while !-pos
		 (goto-char (point-max))
		 (cond ((and (not @-pos)
			     (not (cdr !-pos)))
			(setq @-pos (point))
			(insert-before-markers "@ "))
		       (t
			(setq %-pos (cons (point) %-pos))
			(insert-before-markers "% ")))
		 (backward-char 1)
		 (insert-buffer-substring 
		  (current-buffer)
		  (if (nth 1 !-pos)
		      (1+ (nth 1 !-pos))
		    (point-min))
		  (car !-pos))
		 (mail-extr-delete-char 1)
		 (or (save-excursion
		       (mail-extr-safe-move-sexp -1)
		       (mail-extr-skip-whitespace-backward)
		       (eq ?. (preceding-char)))
		     (insert-before-markers
		      (if (save-excursion
			    (mail-extr-skip-whitespace-backward)
			    (eq ?. (preceding-char)))
			  ""
			".")
		      "uucp"))
		 (setq !-pos (cdr !-pos))))
	     (and saved-%-pos
		  (setq %-pos (append (mapcar 'mail-extr-demarkerize
					      saved-%-pos)
				      %-pos)))
	     (setq @-pos (mail-extr-demarkerize @-pos))
	     (narrow-to-region (1+ saved-!-pos) (point-max)))))

      ;; WARNING: THIS CODE IS DUPLICATED ABOVE.
      (cond ((and %-pos
		  (not @-pos))
	     (goto-char (car %-pos))
	     (mail-extr-delete-char 1)
	     (setq @-pos (point))
	     (insert "@")
	     (setq %-pos (cdr %-pos))))

      (setq %-pos (nreverse %-pos))
      ;; RFC 1034 doesn't approve of this, oh well:
      (downcase-region (or (car %-pos) @-pos (point-max)) (point-max))
      (cond (%-pos			; implies @-pos valid
	     (setq temp %-pos)
	     (catch 'truncated
	       (while temp
		 (goto-char (or (nth 1 temp)
				@-pos))
		 (mail-extr-skip-whitespace-backward)
		 (save-excursion
		   (mail-extr-safe-move-sexp -1)
		   (setq domain-pos (point))
		   (mail-extr-skip-whitespace-backward)
		   (setq \.-pos (eq ?. (preceding-char))))
		 (cond ((and \.-pos
			     ;; #### string consing
			     (let ((s (intern-soft
				       (buffer-substring domain-pos (point))
				       mail-extr-all-top-level-domains)))
			       (and s (get s 'domain-name))))
			(narrow-to-region (point-min) (point))
			(goto-char (car temp))
			(mail-extr-delete-char 1)
			(setq @-pos (point))
			(setcdr temp nil)
			(setq %-pos (delq @-pos %-pos))
			(insert "@")
			(throw 'truncated t)))
		 (setq temp (cdr temp))))))
      (setq mbox-beg (point-min)
	    mbox-end (if %-pos (car %-pos)
		       (or @-pos
			   (point-max))))
      
      ;; Done canonicalizing address.
      
      (set-buffer extraction-buffer)
      
      ;; Decide what part of the address to search to find the full name.
      (cond (
	     ;; Example: "First M. Last" <[e-mail]>
	     (and phrase-beg
		  (eq quote-beg phrase-beg)
		  (<= quote-end phrase-end))
	     (narrow-to-region (1+ quote-beg) (1- quote-end))
	     (mail-extr-undo-backslash-quoting (point-min) (point-max)))

	    ;; Example: First Last <[e-mail]>
	    (phrase-beg
	     (narrow-to-region phrase-beg phrase-end))

	    ;; Example: [e-mail] (First M. Last)
	    (cbeg
	     (narrow-to-region (1+ cbeg) (1- cend))
	     (mail-extr-undo-backslash-quoting (point-min) (point-max))
	     
	     ;; Deal with spacing problems
	     (goto-char (point-min))
;	     (cond ((not (search-forward " " nil t))
;		    (goto-char (point-min))
;		    (cond ((search-forward "_" nil t)
;			   ;; Handle the *idiotic* use of underlines as spaces.
;			   ;; Example: [e-mail] (First_M._Last)
;			   (goto-char (point-min))
;			   (while (search-forward "_" nil t)
;			     (replace-match " " t)))
;			  ((search-forward "." nil t)
;			   ;; Fix . used as space
;			   ;; Example: [e-mail] (daniel.jacobson)
;			   (goto-char (point-min))
;			   (while (re-search-forward mail-extr-bad-dot-pattern nil t)
;			     (replace-match "\\1 \\2" t))))))
	     )
	    
	    ;; Otherwise we try to get the name from the mailbox portion
	    ;; of the address.
	    ;; Example: [e-mail]
	    (t
	     ;; *** Work in canon buffer instead?  No, can't.  Hmm.
	     (goto-char (point-max))
	     (narrow-to-region (point) (point))
	     (insert-buffer-substring canonicalization-buffer
				      mbox-beg mbox-end)
	     (goto-char (point-min))
	     
	     ;; Example: [e-mail]
	     (setq \.-ends-name (re-search-forward "[_0-9]" nil t))
	     
	     (goto-char (point-min))

	     (if (not mail-extr-mangle-uucp)
		 (modify-syntax-entry ?! "w" (syntax-table)))

	     (while (progn
		      (mail-extr-skip-whitespace-forward)
		      (not (eobp)))
	       (setq char (char-after (point)))
	       (cond
		((eq char ?\")
		 (setq quote-beg (point))
		 (or (mail-extr-safe-move-sexp 1)
		     ;; TODO: handle this error condition!!!!!
		     (forward-char 1))
		 ;; take into account deletions
		 (setq quote-end (- (point) 2))
		 (save-excursion
		   (backward-char 1)
		   (mail-extr-delete-char 1)
		   (goto-char quote-beg)
		   (mail-extr-delete-char 1))
		 (mail-extr-undo-backslash-quoting quote-beg quote-end)
		 (or (eq ?\  (char-after (point)))
		     (insert " "))
;;		 (setq mailbox-name-processed-flag t)
		 (setq \.-ends-name t))
		((eq char ?.)
		 (if (memq (char-after (1+ (point))) '(?_ ?=))
		     (progn
		       (forward-char 1)
		       (mail-extr-delete-char 1)
		       (insert ?\ ))
		   (if \.-ends-name
		       (narrow-to-region (point-min) (point))
		     (mail-extr-delete-char 1)
		     (insert " ")))
;;		 (setq mailbox-name-processed-flag t)
		 )
		((memq (char-syntax char) '(?. ?\\))
		 (mail-extr-delete-char 1)
		 (insert " ")
;;		 (setq mailbox-name-processed-flag t)
		 )
		(t
		 (setq atom-beg (point))
		 (forward-word 1)
		 (setq atom-end (point))
		 (goto-char atom-beg)
		 (save-restriction
		   (narrow-to-region atom-beg atom-end)
		   (cond
		    
		    ;; Handle X.400 addresses encoded in RFC-822.
		    ;; *** Shit!  This has to handle the case where it is
		    ;; *** embedded in a quote too!
		    ;; *** Shit!  The input is being broken up into atoms
		    ;; *** by periods!
		    ((looking-at mail-extr-x400-encoded-address-pattern)
		     
		     ;; Copy the contents of the individual fields that
		     ;; might hold name data to the beginning.
		     (mapcar
		      (function
		       (lambda (field-pattern)
			 (cond
			  ((save-excursion
			     (re-search-forward field-pattern nil t))
			   (insert-buffer-substring (current-buffer)
						    (match-beginning 1)
						    (match-end 1))
			   (insert " ")))))
		      (list mail-extr-x400-encoded-address-given-name-pattern
			    mail-extr-x400-encoded-address-surname-pattern
			    mail-extr-x400-encoded-address-full-name-pattern))
		     
		     ;; Discard the rest, since it contains stuff like
		     ;; routing information, not part of a name.
		     (mail-extr-skip-whitespace-backward)
		     (delete-region (point) (point-max))
		     
		     ;; Handle periods used for spacing.
		     (while (re-search-forward mail-extr-bad-dot-pattern nil t)
		       (replace-match "\\1 \\2" t))
		     
;;		     (setq mailbox-name-processed-flag t)
		     )
		    
		    ;; Handle normal addresses.
		    (t
		     (goto-char (point-min))
		     ;; Handle _ and = used for spacing.
		     (while (re-search-forward "\\([^_=]+\\)[_=]" nil t)
		       (replace-match "\\1 " t)
;;		       (setq mailbox-name-processed-flag t)
		       )
		     (goto-char (point-max))))))))

	     ;; undo the dirty deed
	     (if (not mail-extr-mangle-uucp)
		 (modify-syntax-entry ?! "." (syntax-table)))
	     ;;
	     ;; If we derived the name from the mailbox part of the address,
	     ;; and we only got one word out of it, don't treat that as a
	     ;; name.  "foo@bar" --> (nil "foo@bar"), not ("foo" "foo@bar")
             ;; (if (not mailbox-name-processed-flag)
             ;;     (delete-region (point-min) (point-max)))
	     ))
      
      (set-syntax-table mail-extr-address-text-syntax-table)
      
      (mail-extr-voodoo mbox-beg mbox-end canonicalization-buffer)
      (goto-char (point-min))

      ;; If name is "First Last" and userid is "F?L", then assume
      ;; the middle initial is the second letter in the userid.
      ;; Initial code by Jamie Zawinski <[e-mail]>
      ;; *** Make it work when there's a suffix as well.
      (goto-char (point-min))
      (cond ((and mail-extr-guess-middle-initial
		  (not disable-initial-guessing-flag)
		  (eq 3 (- mbox-end mbox-beg))
		  (progn
		    (goto-char (point-min))
		    (looking-at mail-extr-two-name-pattern)))
	     (setq fi (char-after (match-beginning 0))
		   li (char-after (match-beginning 3)))
	     (save-excursion
	       (set-buffer canonicalization-buffer)
	       ;; char-equal is ignoring case here, so no need to upcase
	       ;; or downcase.
	       (let ((case-fold-search t))
		 (and (char-equal fi (char-after mbox-beg))
		      (char-equal li (char-after (1- mbox-end)))
		      (setq mi (char-after (1+ mbox-beg))))))
	     (cond ((and mi
			 ;; TODO: use better table than syntax table
			 (eq ?w (char-syntax mi)))
		    (goto-char (match-beginning 3))
		    (insert (upcase mi) ". ")))))
      
      ;; Nuke name if it is the same as mailbox name.
      (let ((buffer-length (- (point-max) (point-min)))
	    (i 0)
	    (names-match-flag t))
	(cond ((and (> buffer-length 0)
		    (eq buffer-length (- mbox-end mbox-beg)))
	       (goto-char (point-max))
	       (insert-buffer-substring canonicalization-buffer
					mbox-beg mbox-end)
	       (while (and names-match-flag
			   (< i buffer-length))
		 (or (eq (downcase (char-after (+ i (point-min))))
			 (downcase
			  (char-after (+ i buffer-length (point-min)))))
		     (setq names-match-flag nil))
		 (setq i (1+ i)))
	       (delete-region (+ (point-min) buffer-length) (point-max))
	       (if names-match-flag
		   (narrow-to-region (point) (point))))))
      
      ;; Nuke name if it's just one word.
      (goto-char (point-min))
      (and mail-extr-ignore-single-names
	   (not (re-search-forward "[- ]" nil t))
	   (narrow-to-region (point) (point)))
      
      ;; Result
      (list (if (not (= (point-min) (point-max)))
		(buffer-string))
	    (progn
	      (set-buffer canonicalization-buffer)
	      (if (not (= (point-min) (point-max)))
		  (buffer-string))))
      )))

(defun mail-extr-voodoo (mbox-beg mbox-end canonicalization-buffer)
  (let ((word-count 0)
	(case-fold-search nil)
	mixed-case-flag lower-case-flag ;;upper-case-flag
	suffix-flag last-name-comma-flag
	;;cbeg cend
	initial
	begin-again-flag
	drop-this-word-if-trailing-flag
	drop-last-word-if-trailing-flag
	word-found-flag
	this-word-beg last-word-beg
	name-beg name-end
	name-done-flag
	)
    (save-excursion
      (set-syntax-table mail-extr-address-text-syntax-table)
      
      ;; This was moved above.
      ;; Fix . used as space
      ;; But it belongs here because it occurs not only as
      ;;   [e-mail] (Piet.Rypens)
      ;; but also as
      ;;   "Piet.Rypens" <[e-mail]>
      ;;(goto-char (point-min))
      ;;(while (re-search-forward mail-extr-bad-dot-pattern nil t)
      ;;  (replace-match "\\1 \\2" t))

      (cond ((not (search-forward " " nil t))
	     (goto-char (point-min))
	     (cond ((search-forward "_" nil t)
		    ;; Handle the *idiotic* use of underlines as spaces.
		    ;; Example: [e-mail] (First_M._Last)
		    (goto-char (point-min))
		    (while (search-forward "_" nil t)
		      (replace-match " " t)))
		   ((search-forward "." nil t)
		    ;; Fix . used as space
		    ;; Example: [e-mail] (daniel.jacobson)
		    (goto-char (point-min))
		    (while (re-search-forward mail-extr-bad-dot-pattern nil t)
		      (replace-match "\\1 \\2" t))))))


      ;; Loop over the words (and other junk) in the name.
      (goto-char (point-min))
      (while (not name-done-flag)
	
	(cond (word-found-flag
	       ;; Last time through this loop we skipped over a word.
	       (setq last-word-beg this-word-beg)
	       (setq drop-last-word-if-trailing-flag
		     drop-this-word-if-trailing-flag)
	       (setq word-found-flag nil)))

	(cond (begin-again-flag
	       ;; Last time through the loop we found something that
	       ;; indicates we should pretend we are beginning again from
	       ;; the start.
	       (setq word-count 0)
	       (setq last-word-beg nil)
	       (setq drop-last-word-if-trailing-flag nil)
	       (setq mixed-case-flag nil)
	       (setq lower-case-flag nil)
;;	       (setq upper-case-flag nil)
	       (setq begin-again-flag nil)
	       ))
	
	;; Initialize for this iteration of the loop.
	(mail-extr-skip-whitespace-forward)
	(if (eq word-count 0) (narrow-to-region (point) (point-max)))
	(setq this-word-beg (point))
	(setq drop-this-word-if-trailing-flag nil)
	
	;; Decide what to do based on what we are looking at.
	(cond
	 
	 ;; Delete title
	 ((and (eq word-count 0)
	       (looking-at mail-extr-full-name-prefixes))
	  (goto-char (match-end 0))
	  (narrow-to-region (point) (point-max)))
	 
	 ;; Stop after name suffix
	 ((and (>= word-count 2)
	       (looking-at mail-extr-full-name-suffix-pattern))
	  (mail-extr-skip-whitespace-backward)
	  (setq suffix-flag (point))
	  (if (eq ?, (following-char))
	      (forward-char 1)
	    (insert ?,))
	  ;; Enforce at least one space after comma
	  (or (eq ?\  (following-char))
	      (insert ?\ ))
	  (mail-extr-skip-whitespace-forward)
	  (cond ((memq (following-char) '(?j ?J ?s ?S))
		 (capitalize-word 1)
		 (if (eq (following-char) ?.)
		     (forward-char 1)
		   (insert ?.)))
		(t
		 (upcase-word 1)))
	  (setq word-found-flag t)
	  (setq name-done-flag t))
	 
	 ;; Handle SCA names
	 ((looking-at "MKA \\(.+\\)")	; "Mundanely Known As"
	  (goto-char (match-beginning 1))
	  (narrow-to-region (point) (point-max))
	  (setq begin-again-flag t))
	 
	 ;; Check for initial last name followed by comma
	 ((and (eq ?, (following-char))
	       (eq word-count 1))
	  (forward-char 1)
	  (setq last-name-comma-flag t)
	  (or (eq ?\  (following-char))
	      (insert ?\ )))
	 
	 ;; Stop before trailing comma-separated comment
	 ;; THIS CASE MUST BE AFTER THE PRECEDING CASES.
	 ;; *** This case is redundant???
	 ;;((eq ?, (following-char))
	 ;; (setq name-done-flag t))
	 
	 ;; Delete parenthesized/quoted comment/nickname
	 ((memq (following-char) '(?\( ?\{ ?\[ ?\" ?\' ?\`))
	  (setq cbeg (point))
	  (set-syntax-table mail-extr-address-text-comment-syntax-table)
	  (cond ((memq (following-char) '(?\' ?\`))
		 (or (search-forward "'" nil t
				     (if (eq ?\' (following-char)) 2 1))
		     (mail-extr-delete-char 1)))
		(t
		 (or (mail-extr-safe-move-sexp 1)
		     (goto-char (point-max)))))
	  (set-syntax-table mail-extr-address-text-syntax-table)
	  (setq cend (point))
	  (cond
	   ;; Handle case of entire name being quoted
	   ((and (eq word-count 0)
		 (looking-at " *\\'")
		 (>= (- cend cbeg) 2))
	    (narrow-to-region (1+ cbeg) (1- cend))
	    (goto-char (point-min)))
	   (t
	    ;; Handle case of quoted initial
	    (if (and (or (= 3 (- cend cbeg))
			 (and (= 4 (- cend cbeg))
			      (eq ?. (char-after (+ 2 cbeg)))))
		     (not (looking-at " *\\'")))
		(setq initial (char-after (1+ cbeg)))
	      (setq initial nil))
	    (delete-region cbeg cend)
	    (if initial
		(insert initial ". ")))))
	 
	 ;; Handle & substitution
	 ((and (or (bobp)
		   (eq ?\  (preceding-char)))
	       (looking-at "&\\( \\|\\'\\)"))
	  (mail-extr-delete-char 1)
	  (capitalize-region
	   (point)
	   (progn
	     (insert-buffer-substring canonicalization-buffer
				      mbox-beg mbox-end)
	     (point)))
	  (setq disable-initial-guessing-flag t)
	  (setq word-found-flag t))
	 
	 ;; Handle *Stupid* VMS date stamps
	 ((looking-at mail-extr-stupid-vms-date-stamp-pattern)
	  (replace-match "" t))
	 
	 ;; Handle Chinese characters.
	 ((looking-at mail-extr-hz-embedded-gb-encoded-chinese-pattern)
	  (goto-char (match-end 0))
	  (setq word-found-flag t))
	 
	 ;; Skip initial garbage characters.
	 ;; THIS CASE MUST BE AFTER THE PRECEDING CASES.
	 ((and (eq word-count 0)
	       (looking-at mail-extr-leading-garbage))
	  (goto-char (match-end 0))
	  ;; *** Skip backward over these???
	  ;; (skip-chars-backward "& \"")
	  (narrow-to-region (point) (point-max)))
	 
	 ;; Various stopping points
	 ((or
	   
	   ;; Stop before ALL CAPS acronyms, if preceded by mixed-case
	   ;; words.  Example: XT-DEM.
	   (and (>= word-count 2)
		mixed-case-flag
		(looking-at mail-extr-weird-acronym-pattern)
		(not (looking-at mail-extr-roman-numeral-pattern)))
	   
	   ;; Stop before trailing alternative address
	   (looking-at mail-extr-alternative-address-pattern)
	   
	   ;; Stop before trailing comment not introduced by comma
	   ;; THIS CASE MUST BE AFTER AN EARLIER CASE.
	   (looking-at mail-extr-trailing-comment-start-pattern)
	   
	   ;; Stop before telephone numbers
	   (looking-at mail-extr-telephone-extension-pattern))
	  (setq name-done-flag t))
	 
	 ;; Delete ham radio call signs
	 ((looking-at mail-extr-ham-call-sign-pattern)
	  (delete-region (match-beginning 0) (match-end 0)))
	 
	 ;; Fixup initials
	 ((looking-at mail-extr-initial-pattern)
	  (or (eq (following-char) (upcase (following-char)))
	      (setq lower-case-flag t))
	  (forward-char 1)
	  (if (eq ?. (following-char))
	      (forward-char 1)
	    (insert ?.))
	  (or (eq ?\  (following-char))
	      (insert ?\ ))
	  (setq word-found-flag t))
	 
	 ;; Handle BITNET LISTSERV list names.
	 ((and (eq word-count 0)
	       (looking-at mail-extr-listserv-list-name-pattern))
	  (narrow-to-region (match-beginning 1) (match-end 1))
	  (setq word-found-flag t)
	  (setq name-done-flag t))
	 
	 ;; Regular name words
	 ((looking-at mail-extr-name-pattern)
	  (setq name-beg (point))
	  (setq name-end (match-end 0))
	  
	  ;; Certain words will be dropped if they are at the end.
	  (and (>= word-count 2)
	       (not lower-case-flag)
	       (or
		;; A trailing 4-or-more letter lowercase words preceded by
		;; mixed case or uppercase words will be dropped.
		(looking-at "[a-z][a-z][a-z][a-z]+[ \t]*\\'")
		;; Drop a trailing word which is terminated with a period.
		(eq ?. (char-after (1- name-end))))
	       (setq drop-this-word-if-trailing-flag t))
	  
	  ;; Set the flags that indicate whether we have seen a lowercase
	  ;; word, a mixed case word, and an uppercase word.
	  (if (re-search-forward "[a-z]" name-end t)
	      (if (progn
		    (goto-char name-beg)
		    (re-search-forward "[A-Z]" name-end t))
		  (setq mixed-case-flag t)
		(setq lower-case-flag t))
;;	    (setq upper-case-flag t)
	    )
	  
	  (goto-char name-end)
	  (setq word-found-flag t))

	 (t
	  (setq name-done-flag t)
	  ))
	
	;; Count any word that we skipped over.
	(if word-found-flag
	    (setq word-count (1+ word-count))))
      
      ;; If the last thing in the name is 2 or more periods, or one or more
      ;; other sentence terminators (but not a single period) then keep them
      ;; and the preceeding word.  This is for the benefit of whole sentences
      ;; in the name field: it's better behavior than dropping the last word
      ;; of the sentence...
      (if (and (not suffix-flag)
	       (looking-at "\\(\\.+\\|[?!;:.][?!;:.]+\\|[?!;:][?!;:.]*\\)\\'"))
	  (goto-char (setq suffix-flag (point-max))))

      ;; Drop everything after point and certain trailing words.
      (narrow-to-region (point-min)
			(or (and drop-last-word-if-trailing-flag
				 last-word-beg)
			    (point)))
      
      ;; Xerox's mailers SUCK!!!!!!
      ;; We simply refuse to believe that any last name is PARC or ADOC.
      ;; If it looks like that is the last name, that there is no meaningful
      ;; here at all.  Actually I guess it would be best to map patterns
      ;; like [e-mail] into [e-mail], but I don't
      ;; actually know that that is what's going on.
      (cond ((not suffix-flag)
	     (goto-char (point-min))
	     (let ((case-fold-search t))
	       (if (looking-at "[-A-Za-z_]+[. ]\\(PARC\\|ADOC\\)\\'")
		   (erase-buffer)))))

      ;; If last name first put it at end (but before suffix)
      (cond (last-name-comma-flag
	     (goto-char (point-min))
	     (search-forward ",")
	     (setq name-end (1- (point)))
	     (goto-char (or suffix-flag (point-max)))
	     (or (eq ?\  (preceding-char))
		 (insert ?\ ))
	     (insert-buffer-substring (current-buffer) (point-min) name-end)
	     (goto-char name-end)
	     (skip-chars-forward "\t ,")
	     (narrow-to-region (point) (point-max))))
      
      ;; Delete leading and trailing junk characters.
      ;; *** This is probably completly unneeded now.
      ;;(goto-char (point-max))
      ;;(skip-chars-backward mail-extr-non-end-name-chars)
      ;;(if (eq ?. (following-char))
      ;;    (forward-char 1))
      ;;(narrow-to-region (point)
      ;;                  (progn
      ;;                    (goto-char (point-min))
      ;;                    (skip-chars-forward mail-extr-non-begin-name-chars)
      ;;                    (point)))
      
      ;; Compress whitespace
      (goto-char (point-min))
      (while (re-search-forward "[ \t\n]+" nil t)
	(replace-match (if (eobp) "" " ") t))
      )))



;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Table of top-level domain names.
;;
;; This is used during address canonicalization; be careful of format changes.
;; Keep in mind that the country abbreviations follow ISO-3166.  There is
;; a U.S. FIPS that specifies a different set of two-letter country
;; abbreviations.

(defconst mail-extr-all-top-level-domains
  (let ((ob (make-vector 509 0)))
    (mapcar
     (function
      (lambda (x)
	(put (intern (downcase (car x)) ob)
	     'domain-name
	     (if (nth 2 x)
		 (format (nth 2 x) (nth 1 x))
	       (nth 1 x)))))
     '(("ag" "Antigua")
       ("ar" "Argentina"	"Argentine Republic")
       ("arpa" t		"Advanced Projects Research Agency")
       ("at" "Austria"		"The Republic of %s")
       ("au" "Australia")
       ("bb" "Barbados")
       ("be" "Belgium"		"The Kingdom of %s")
       ("bg" "Bulgaria")
       ("bitnet" t		"Because It's Time NET")
       ("bo" "Bolivia"		"Republic of %s")
       ("br" "Brazil"		"The Federative Republic of %s")
       ("bs" "Bahamas")
       ("bz" "Belize")
       ("ca" "Canada")
       ("ch" "Switzerland"	"The Swiss Confederation")
       ("cl" "Chile"		"The Republic of %s")
       ("cn" "China"		"The People's Republic of %s")
       ("co" "Columbia")
       ("com" t			"Commercial organizations (U.S.A.)")
       ("cr" "Costa Rica"	"The Republic of %s")
       ("cs" "Czechoslovakia")
       ("de" "Germany")
       ("dk" "Denmark")
       ("dm" "Dominica")
       ("do" "Dominican Republic"	"The %s")
       ("ec" "Ecuador"		"The Republic of %s")
       ("edu" t			"Educational institutions (U.S.A.)")
       ("eg" "Egypt"		"The Arab Republic of %s")
       ("es" "Spain"		"The Kingdom of %s")
       ("fi" "Finland"		"The Republic of %s")
       ("fj" "Fiji")
       ("fr" "France")
       ("gov" t			"Government (U.S.A.)")
       ("gr" "Greece"		"The Hellenic Republic (%s)")
       ("hk" "Hong Kong")
       ("hu" "Hungary"		"The Hungarian People's Republic")	;???
       ("ie" "Ireland")
       ("il" "Israel"		"The State of %s")
       ("in" "India"		"The Republic of %s")
       ("int" t			"(something British, don't know what)")
       ("is" "Iceland"		"The Republic of %s")
       ("it" "Italy"		"The Italian Republic")
       ("jm" "Jamaica")
       ("jp" "Japan")
       ("kn" "St. Kitts and Nevis")
       ("kr" "South Korea")
       ("lc" "St. Lucia")
       ("lk" "Sri Lanka"	"The Democratic Socialist Republic of %s")
       ("mil" t			"Military (U.S.A.)")
       ("mx" "Mexico"		"The United Mexican States")
       ("my" "Malaysia"		"%s (changed to Myanmar?)")		;???
       ("na" "Namibia")
       ("nato" t		"North Atlantic Treaty Organization")
       ("net" t			"Network")
       ("ni" "Nicaragua"	"The Republic of %s")
       ("nl" "Netherlands"	"The Kingdom of the %s")
       ("no" "Norway"		"The Kingdom of %s")
       ("nz" "New Zealand")
       ("org" t			"Non-commercial organizations (U.S.A.)")
       ("pe" "Peru")
       ("pg" "Papua New Guinea")
       ("ph" "Philippines"	"The Republic of the %s")
       ("pl" "Poland")
       ("pr" "Puerto Rico")
       ("pt" "Portugal"		"The Portugese Republic")
       ("py" "Paraguay")
       ("se" "Sweden"		"The Kingdom of %s")
       ("sg" "Singapore"	"The Republic of %s")
       ("sr" "Suriname")
       ("su" "Soviet Union")
       ("th" "Thailand"		"The Kingdom of %s")
       ("tn" "Tunisia")
       ("tr" "Turkey"		"The Republic of %s")
       ("tt" "Trinidad and Tobago")
       ("tw" "Taiwan")
       ("uk" "United Kingdom"	"The %s of Great Britain and Northern Ireland")
       ("unter-dom" t		"(something German)")
       ("us" "U.S.A."		"The United States of America")
       ("uucp" t		"Unix to Unix CoPy")
       ("uy" "Uruguay"		"The Eastern Republic of %s")
       ("vc" "St. Vincent and the Grenadines")
       ("ve" "Venezuela"	"The Republic of %s")
       ("yu" "Yugoslavia"	"The Socialist Federal Republic of %s")
       ;; Also said to be Zambia ... (why not Zaire???)
       ("za" "South Africa"	"The Republic of %s (or Zambia? Zaire?)")
       ("zw" "Zimbabwe"		"Republic of %s")
;; fipnet
       ))
    ob))

;;;###autoload
(defun what-domain (domain)
  "Convert mail domain DOMAIN to the country it corresponds to."
  (interactive
   (let ((completion-ignore-case t))
     (list (completing-read "Domain: "
			    mail-extr-all-top-level-domains nil t))))
  (or (setq domain (intern-soft (downcase domain)
				mail-extr-all-top-level-domains))
      (error "no such domain"))
  (message "%s: %s" (upcase (symbol-name domain)) (get domain 'domain-name)))


;(let ((all nil))
;  (mapatoms #'(lambda (x)
;		(if (and (boundp x) 
;			 (string-match "^mail-extr-" (symbol-name x)))
;		    (setq all (cons x all)))))
;  (setq all (sort all #'string-lessp))
;  (cons 'setq
;	(apply 'nconc (mapcar #'(lambda (x)
;				  (list x (symbol-value x)))
;			      all))))


(provide 'mail-extr)

;;; mail-extr.el ends here