Mercurial > emacs
annotate src/cm.c @ 14482:479987ba2c8d
(x_frame_parms): Add "title" element.
(x_set_title): New function.
(x_set_name): Let title prop override name prop for title use.
(x_set_icon_name): Use title parm before name parm, if no icon_name.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Sun, 04 Feb 1996 03:00:25 +0000 |
parents | ee40177f6c68 |
children | fa9ff387d260 |
rev | line source |
---|---|
484 | 1 /* Cursor motion subroutines for GNU Emacs. |
11235 | 2 Copyright (C) 1985, 1995 Free Software Foundation, Inc. |
484 | 3 based primarily on public domain code written by Chris Torek |
4 | |
5 This file is part of GNU Emacs. | |
6 | |
7 GNU Emacs is free software; you can redistribute it and/or modify | |
8 it under the terms of the GNU General Public License as published by | |
7107 | 9 the Free Software Foundation; either version 2, or (at your option) |
484 | 10 any later version. |
11 | |
12 GNU Emacs is distributed in the hope that it will be useful, | |
13 but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 GNU General Public License for more details. | |
16 | |
17 You should have received a copy of the GNU General Public License | |
18 along with GNU Emacs; see the file COPYING. If not, write to | |
14186
ee40177f6c68
Update FSF's address in the preamble.
Erik Naggum <erik@naggum.no>
parents:
11235
diff
changeset
|
19 the Free Software Foundation, Inc., 59 Temple Place - Suite 330, |
ee40177f6c68
Update FSF's address in the preamble.
Erik Naggum <erik@naggum.no>
parents:
11235
diff
changeset
|
20 Boston, MA 02111-1307, USA. */ |
484 | 21 |
22 | |
4696
1fc792473491
Include <config.h> instead of "config.h".
Roland McGrath <roland@gnu.org>
parents:
484
diff
changeset
|
23 #include <config.h> |
484 | 24 #include <stdio.h> |
25 #include "cm.h" | |
26 #include "termhooks.h" | |
27 | |
28 #define BIG 9999 /* 9999 good on VAXen. For 16 bit machines | |
29 use about 2000.... */ | |
30 | |
31 char *tgoto (); | |
32 | |
33 extern char *BC, *UP; | |
34 | |
35 int cost; /* sums up costs */ | |
36 | |
37 /* ARGSUSED */ | |
38 evalcost (c) | |
39 char c; | |
40 { | |
41 cost++; | |
8985
2825665b8352
(evalcost, cmputc): They now return their arguments.
Richard M. Stallman <rms@gnu.org>
parents:
7107
diff
changeset
|
42 return c; |
484 | 43 } |
44 | |
45 cmputc (c) | |
46 char c; | |
47 { | |
48 if (termscript) | |
49 fputc (c & 0177, termscript); | |
50 putchar (c & 0177); | |
8985
2825665b8352
(evalcost, cmputc): They now return their arguments.
Richard M. Stallman <rms@gnu.org>
parents:
7107
diff
changeset
|
51 return c; |
484 | 52 } |
53 | |
54 /* NEXT TWO ARE DONE WITH MACROS */ | |
55 #if 0 | |
56 /* | |
57 * Assume the cursor is at row row, column col. Normally used only after | |
58 * clearing the screen, when the cursor is at (0, 0), but what the heck, | |
59 * let's let the guy put it anywhere. | |
60 */ | |
61 | |
62 static | |
63 at (row, col) { | |
64 curY = row; | |
65 curX = col; | |
66 } | |
67 | |
68 /* | |
69 * Add n columns to the current cursor position. | |
70 */ | |
71 | |
72 static | |
73 addcol (n) { | |
74 curX += n; | |
75 | |
76 /* | |
77 * If cursor hit edge of screen, what happened? | |
78 * N.B.: DO NOT!! write past edge of screen. If you do, you | |
79 * deserve what you get. Furthermore, on terminals with | |
80 * autowrap (but not magicwrap), don't write in the last column | |
81 * of the last line. | |
82 */ | |
83 | |
84 if (curX == Wcm.cm_cols) { | |
85 /* | |
86 * Well, if magicwrap, still there, past the edge of the | |
87 * screen (!). If autowrap, on the col 0 of the next line. | |
88 * Otherwise on last column. | |
89 */ | |
90 | |
91 if (Wcm.cm_magicwrap) | |
92 ; /* "limbo" */ | |
93 else if (Wcm.cm_autowrap) { | |
94 curX = 0; | |
95 curY++; /* Beware end of screen! */ | |
96 } | |
97 else | |
98 curX--; | |
99 } | |
100 } | |
101 #endif | |
102 | |
103 /* | |
10437 | 104 * Terminals with magicwrap (xn) don't all behave identically. |
105 * The VT100 leaves the cursor in the last column but will wrap before | |
106 * printing the next character. I hear that the Concept terminal does | |
107 * the wrap immediately but ignores the next newline it sees. And some | |
108 * terminals just have buggy firmware, and think that the cursor is still | |
109 * in limbo if we use direct cursor addressing from the phantom column. | |
110 * The only guaranteed safe thing to do is to emit a CRLF immediately | |
111 * after we reach the last column; this takes us to a known state. | |
112 */ | |
113 void | |
114 cmcheckmagic () | |
115 { | |
116 if (curX == FrameCols) | |
117 { | |
118 if (!MagicWrap || curY >= FrameRows - 1) | |
119 abort (); | |
120 if (termscript) | |
121 putc ('\r', termscript); | |
122 putchar ('\r'); | |
123 if (termscript) | |
124 putc ('\n', termscript); | |
125 putchar ('\n'); | |
126 curX = 0; | |
127 curY++; | |
128 } | |
129 } | |
130 | |
131 | |
132 /* | |
484 | 133 * (Re)Initialize the cost factors, given the output speed of the terminal |
134 * in the variable ospeed. (Note: this holds B300, B9600, etc -- ie stuff | |
135 * out of <sgtty.h>.) | |
136 */ | |
137 | |
138 cmcostinit () | |
139 { | |
140 char *p; | |
141 | |
142 #define COST(x,e) (x ? (cost = 0, tputs (x, 1, e), cost) : BIG) | |
143 #define CMCOST(x,e) ((x == 0) ? BIG : (p = tgoto(x, 0, 0), COST(p ,e))) | |
144 | |
145 Wcm.cc_up = COST (Wcm.cm_up, evalcost); | |
146 Wcm.cc_down = COST (Wcm.cm_down, evalcost); | |
147 Wcm.cc_left = COST (Wcm.cm_left, evalcost); | |
148 Wcm.cc_right = COST (Wcm.cm_right, evalcost); | |
149 Wcm.cc_home = COST (Wcm.cm_home, evalcost); | |
150 Wcm.cc_cr = COST (Wcm.cm_cr, evalcost); | |
151 Wcm.cc_ll = COST (Wcm.cm_ll, evalcost); | |
152 Wcm.cc_tab = Wcm.cm_tabwidth ? COST (Wcm.cm_tab, evalcost) : BIG; | |
153 | |
154 /* | |
155 * These last three are actually minimum costs. When (if) they are | |
156 * candidates for the least-cost motion, the real cost is computed. | |
157 * (Note that "0" is the assumed to generate the minimum cost. | |
158 * While this is not necessarily true, I have yet to see a terminal | |
159 * for which is not; all the terminals that have variable-cost | |
160 * cursor motion seem to take straight numeric values. --ACT) | |
161 */ | |
162 | |
163 Wcm.cc_abs = CMCOST (Wcm.cm_abs, evalcost); | |
164 Wcm.cc_habs = CMCOST (Wcm.cm_habs, evalcost); | |
165 Wcm.cc_vabs = CMCOST (Wcm.cm_vabs, evalcost); | |
166 | |
167 #undef CMCOST | |
168 #undef COST | |
169 } | |
170 | |
171 /* | |
172 * Calculate the cost to move from (srcy, srcx) to (dsty, dstx) using | |
173 * up and down, and left and right, motions, and tabs. If doit is set | |
174 * actually perform the motion. | |
175 */ | |
176 | |
177 static | |
178 calccost (srcy, srcx, dsty, dstx, doit) | |
179 { | |
180 register int deltay, | |
181 deltax, | |
182 c, | |
183 totalcost; | |
184 int ntabs, | |
185 n2tabs, | |
186 tabx, | |
187 tab2x, | |
188 tabcost; | |
189 register char *p; | |
190 | |
191 /* If have just wrapped on a terminal with xn, | |
192 don't believe the cursor position: give up here | |
193 and force use of absolute positioning. */ | |
194 | |
195 if (curX == Wcm.cm_cols) | |
196 goto fail; | |
197 | |
198 totalcost = 0; | |
199 if ((deltay = dsty - srcy) == 0) | |
200 goto x; | |
201 if (deltay < 0) | |
202 p = Wcm.cm_up, c = Wcm.cc_up, deltay = -deltay; | |
203 else | |
204 p = Wcm.cm_down, c = Wcm.cc_down; | |
205 if (c == BIG) { /* caint get thar from here */ | |
206 if (doit) | |
207 printf ("OOPS"); | |
208 return c; | |
209 } | |
210 totalcost = c * deltay; | |
211 if (doit) | |
212 while (--deltay >= 0) | |
213 tputs (p, 1, cmputc); | |
214 x: | |
215 if ((deltax = dstx - srcx) == 0) | |
216 goto done; | |
217 if (deltax < 0) { | |
218 p = Wcm.cm_left, c = Wcm.cc_left, deltax = -deltax; | |
219 goto dodelta; /* skip all the tab junk */ | |
220 } | |
221 /* Tabs (the toughie) */ | |
222 if (Wcm.cc_tab >= BIG || !Wcm.cm_usetabs) | |
223 goto olddelta; /* forget it! */ | |
224 | |
225 /* | |
226 * ntabs is # tabs towards but not past dstx; n2tabs is one more | |
227 * (ie past dstx), but this is only valid if that is not past the | |
228 * right edge of the screen. We can check that at the same time | |
229 * as we figure out where we would be if we use the tabs (which | |
230 * we will put into tabx (for ntabs) and tab2x (for n2tabs)). | |
231 */ | |
232 | |
233 ntabs = (deltax + srcx % Wcm.cm_tabwidth) / Wcm.cm_tabwidth; | |
234 n2tabs = ntabs + 1; | |
235 tabx = (srcx / Wcm.cm_tabwidth + ntabs) * Wcm.cm_tabwidth; | |
236 tab2x = tabx + Wcm.cm_tabwidth; | |
237 | |
238 if (tab2x >= Wcm.cm_cols) /* too far (past edge) */ | |
239 n2tabs = 0; | |
240 | |
241 /* | |
242 * Now set tabcost to the cost for using ntabs, and c to the cost | |
243 * for using n2tabs, then pick the minimum. | |
244 */ | |
245 | |
246 /* cost for ntabs + cost for right motion */ | |
247 tabcost = ntabs ? ntabs * Wcm.cc_tab + (dstx - tabx) * Wcm.cc_right | |
248 : BIG; | |
249 | |
250 /* cost for n2tabs + cost for left motion */ | |
251 c = n2tabs ? n2tabs * Wcm.cc_tab + (tab2x - dstx) * Wcm.cc_left | |
252 : BIG; | |
253 | |
254 if (c < tabcost) /* then cheaper to overshoot & back up */ | |
255 ntabs = n2tabs, tabcost = c, tabx = tab2x; | |
256 | |
257 if (tabcost >= BIG) /* caint use tabs */ | |
258 goto newdelta; | |
259 | |
260 /* | |
261 * See if tabcost is less than just moving right | |
262 */ | |
263 | |
264 if (tabcost < (deltax * Wcm.cc_right)) { | |
265 totalcost += tabcost; /* use the tabs */ | |
266 if (doit) | |
267 while (--ntabs >= 0) | |
268 tputs (Wcm.cm_tab, 1, cmputc); | |
269 srcx = tabx; | |
270 } | |
271 | |
272 /* | |
273 * Now might as well just recompute the delta. | |
274 */ | |
275 | |
276 newdelta: | |
277 if ((deltax = dstx - srcx) == 0) | |
278 goto done; | |
279 olddelta: | |
280 if (deltax > 0) | |
281 p = Wcm.cm_right, c = Wcm.cc_right; | |
282 else | |
283 p = Wcm.cm_left, c = Wcm.cc_left, deltax = -deltax; | |
284 | |
285 dodelta: | |
286 if (c == BIG) { /* caint get thar from here */ | |
287 fail: | |
288 if (doit) | |
289 printf ("OOPS"); | |
290 return BIG; | |
291 } | |
292 totalcost += c * deltax; | |
293 if (doit) | |
294 while (--deltax >= 0) | |
295 tputs (p, 1, cmputc); | |
296 done: | |
297 return totalcost; | |
298 } | |
299 | |
300 #if 0 | |
301 losecursor () | |
302 { | |
303 curY = -1; | |
304 } | |
305 #endif | |
306 | |
307 #define USEREL 0 | |
308 #define USEHOME 1 | |
309 #define USELL 2 | |
310 #define USECR 3 | |
311 | |
312 cmgoto (row, col) | |
313 { | |
314 int homecost, | |
315 crcost, | |
316 llcost, | |
317 relcost, | |
318 directcost; | |
319 int use; | |
320 char *p, | |
321 *dcm; | |
322 | |
323 /* First the degenerate case */ | |
324 if (row == curY && col == curX) /* already there */ | |
325 return; | |
326 | |
327 if (curY >= 0 && curX >= 0) | |
328 { | |
329 /* We may have quick ways to go to the upper-left, bottom-left, | |
330 * start-of-line, or start-of-next-line. Or it might be best to | |
331 * start where we are. Examine the options, and pick the cheapest. | |
332 */ | |
333 | |
334 relcost = calccost (curY, curX, row, col, 0); | |
335 use = USEREL; | |
336 if ((homecost = Wcm.cc_home) < BIG) | |
337 homecost += calccost (0, 0, row, col, 0); | |
338 if (homecost < relcost) | |
339 relcost = homecost, use = USEHOME; | |
340 if ((llcost = Wcm.cc_ll) < BIG) | |
341 llcost += calccost (Wcm.cm_rows - 1, 0, row, col, 0); | |
342 if (llcost < relcost) | |
343 relcost = llcost, use = USELL; | |
344 if ((crcost = Wcm.cc_cr) < BIG) { | |
345 if (Wcm.cm_autolf) | |
346 if (curY + 1 >= Wcm.cm_rows) | |
347 crcost = BIG; | |
348 else | |
349 crcost += calccost (curY + 1, 0, row, col, 0); | |
350 else | |
351 crcost += calccost (curY, 0, row, col, 0); | |
352 } | |
353 if (crcost < relcost) | |
354 relcost = crcost, use = USECR; | |
355 directcost = Wcm.cc_abs, dcm = Wcm.cm_abs; | |
356 if (row == curY && Wcm.cc_habs < BIG) | |
357 directcost = Wcm.cc_habs, dcm = Wcm.cm_habs; | |
358 else if (col == curX && Wcm.cc_vabs < BIG) | |
359 directcost = Wcm.cc_vabs, dcm = Wcm.cm_vabs; | |
360 } | |
361 else | |
362 { | |
363 directcost = 0, relcost = 100000; | |
364 dcm = Wcm.cm_abs; | |
365 } | |
366 | |
367 /* | |
368 * In the following comparison, the = in <= is because when the costs | |
369 * are the same, it looks nicer (I think) to move directly there. | |
370 */ | |
371 if (directcost <= relcost) | |
372 { | |
373 /* compute REAL direct cost */ | |
374 cost = 0; | |
375 p = dcm == Wcm.cm_habs ? tgoto (dcm, row, col) : | |
376 tgoto (dcm, col, row); | |
377 tputs (p, 1, evalcost); | |
378 if (cost <= relcost) | |
379 { /* really is cheaper */ | |
380 tputs (p, 1, cmputc); | |
381 curY = row, curX = col; | |
382 return; | |
383 } | |
384 } | |
385 | |
386 switch (use) | |
387 { | |
388 case USEHOME: | |
389 tputs (Wcm.cm_home, 1, cmputc); | |
390 curY = 0, curX = 0; | |
391 break; | |
392 | |
393 case USELL: | |
394 tputs (Wcm.cm_ll, 1, cmputc); | |
395 curY = Wcm.cm_rows - 1, curX = 0; | |
396 break; | |
397 | |
398 case USECR: | |
399 tputs (Wcm.cm_cr, 1, cmputc); | |
400 if (Wcm.cm_autolf) | |
401 curY++; | |
402 curX = 0; | |
403 break; | |
404 } | |
405 | |
406 (void) calccost (curY, curX, row, col, 1); | |
407 curY = row, curX = col; | |
408 } | |
409 | |
410 /* Clear out all terminal info. | |
411 Used before copying into it the info on the actual terminal. | |
412 */ | |
413 | |
414 Wcm_clear () | |
415 { | |
416 bzero (&Wcm, sizeof Wcm); | |
417 UP = 0; | |
418 BC = 0; | |
419 } | |
420 | |
421 /* | |
422 * Initialized stuff | |
423 * Return 0 if can do CM. | |
424 * Return -1 if cannot. | |
425 * Return -2 if size not specified. | |
426 */ | |
427 | |
428 Wcm_init () | |
429 { | |
430 #if 0 | |
431 if (Wcm.cm_abs && !Wcm.cm_ds) | |
432 return 0; | |
433 #endif | |
434 if (Wcm.cm_abs) | |
435 return 0; | |
436 /* Require up and left, and, if no absolute, down and right */ | |
437 if (!Wcm.cm_up || !Wcm.cm_left) | |
438 return - 1; | |
439 if (!Wcm.cm_abs && (!Wcm.cm_down || !Wcm.cm_right)) | |
440 return - 1; | |
441 /* Check that we know the size of the screen.... */ | |
442 if (Wcm.cm_rows <= 0 || Wcm.cm_cols <= 0) | |
443 return - 2; | |
444 return 0; | |
445 } |