Mercurial > emacs
annotate src/m/sequent.h @ 18817:4a53a2477850
Arrange for the leim tar file to unpack in emacs-M.N/leim.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Wed, 16 Jul 1997 04:55:54 +0000 |
parents | ee40177f6c68 |
children | 4be8406ebef9 |
rev | line source |
---|---|
456 | 1 /* machine description file for SEQUENT BALANCE machines |
2 Copyright (C) 1985, 1986 Free Software Foundation, Inc. | |
3 | |
4 This file is part of GNU Emacs. | |
5 | |
6 GNU Emacs is free software; you can redistribute it and/or modify | |
7 it under the terms of the GNU General Public License as published by | |
3699 | 8 the Free Software Foundation; either version 2, or (at your option) |
456 | 9 any later version. |
10 | |
11 GNU Emacs is distributed in the hope that it will be useful, | |
12 but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 GNU General Public License for more details. | |
15 | |
16 You should have received a copy of the GNU General Public License | |
17 along with GNU Emacs; see the file COPYING. If not, write to | |
14186
ee40177f6c68
Update FSF's address in the preamble.
Erik Naggum <erik@naggum.no>
parents:
13374
diff
changeset
|
18 the Free Software Foundation, Inc., 59 Temple Place - Suite 330, |
ee40177f6c68
Update FSF's address in the preamble.
Erik Naggum <erik@naggum.no>
parents:
13374
diff
changeset
|
19 Boston, MA 02111-1307, USA. */ |
456 | 20 |
21 | |
22 /* The following line tells the configuration script what sort of | |
23 operating system this machine is likely to run. | |
24 USUAL-OPSYS="note" | |
25 | |
26 NOTE-START | |
27 Use -opsystem=bsd4-2, or -opsystem=bsd4-3 on newer systems. | |
28 NOTE-END */ | |
29 | |
30 /* NOTE: this file works for DYNIX release 2.0 | |
31 (not tested on 1.3) on NS32000's */ | |
32 | |
9095
23f72b18b420
(WORDS_BIG_ENDIAN): define or undef appropriately, superseding BIG_ENDIAN.
Karl Heuer <kwzh@gnu.org>
parents:
8892
diff
changeset
|
33 /* Define WORDS_BIG_ENDIAN iff lowest-numbered byte in a word |
23f72b18b420
(WORDS_BIG_ENDIAN): define or undef appropriately, superseding BIG_ENDIAN.
Karl Heuer <kwzh@gnu.org>
parents:
8892
diff
changeset
|
34 is the most significant byte. */ |
23f72b18b420
(WORDS_BIG_ENDIAN): define or undef appropriately, superseding BIG_ENDIAN.
Karl Heuer <kwzh@gnu.org>
parents:
8892
diff
changeset
|
35 |
23f72b18b420
(WORDS_BIG_ENDIAN): define or undef appropriately, superseding BIG_ENDIAN.
Karl Heuer <kwzh@gnu.org>
parents:
8892
diff
changeset
|
36 #undef WORDS_BIG_ENDIAN |
23f72b18b420
(WORDS_BIG_ENDIAN): define or undef appropriately, superseding BIG_ENDIAN.
Karl Heuer <kwzh@gnu.org>
parents:
8892
diff
changeset
|
37 |
456 | 38 /* Define NO_ARG_ARRAY if you cannot take the address of the first of a |
39 * group of arguments and treat it as an array of the arguments. */ | |
40 | |
41 /* #define NO_ARG_ARRAY */ | |
42 | |
43 /* Define WORD_MACHINE if addresses and such have | |
44 * to be corrected before they can be used as byte counts. */ | |
45 | |
46 /* #define WORD_MACHINE */ | |
47 | |
48 /* Now define a symbol for the cpu type, if your compiler | |
49 does not define it automatically: | |
50 vax, m68000, ns16000, pyramid, orion, tahoe and APOLLO | |
51 are the ones defined so far. */ | |
52 | |
53 /* BTW: DYNIX defines sequent, ns32000, and ns16000 (GENIX compatibility) */ | |
54 #ifndef sequent /* pre DYNIX 2.1 releases */ | |
55 # define sequent | |
56 #endif | |
57 | |
58 /* Use type int rather than a union, to represent Lisp_Object */ | |
59 /* This is desirable for most machines. */ | |
60 | |
61 #define NO_UNION_TYPE | |
62 | |
63 /* crt0.c should use the vax-bsd style of entry, with these dummy args. */ | |
64 | |
65 #define CRT0_DUMMIES bogus_fp, | |
66 | |
67 /* crt0.c should define a symbol `start' and do .globl with a dot. */ | |
68 | |
69 #define DOT_GLOBAL_START | |
70 | |
71 /* Define EXPLICIT_SIGN_EXTEND if XINT must explicitly sign-extend | |
72 the 24-bit bit field into an int. In other words, if bit fields | |
73 are always unsigned. | |
74 | |
75 If you use NO_UNION_TYPE, this flag does not matter. */ | |
76 | |
77 #define EXPLICIT_SIGN_EXTEND | |
78 | |
79 /* Data type of load average, as read out of kmem. */ | |
80 | |
81 #define LOAD_AVE_TYPE unsigned long | |
82 | |
83 /* Convert that into an integer that is 100 for a load average of 1.0 */ | |
84 | |
85 #define FSCALE 1000.0 | |
86 #define LOAD_AVE_CVT(x) (int) (((double) (x)) * 100.0 / FSCALE) | |
87 | |
88 /* Define CANNOT_DUMP on machines where unexec does not work. | |
89 Then the function dump-emacs will not be defined | |
90 and temacs will do (load "loadup") automatically unless told otherwise. */ | |
91 | |
92 /* #define CANNOT_DUMP */ | |
93 | |
94 /* Define VIRT_ADDR_VARIES if the virtual addresses of | |
95 pure and impure space as loaded can vary, and even their | |
96 relative order cannot be relied on. | |
97 | |
98 Otherwise Emacs assumes that text space precedes data space, | |
99 numerically. */ | |
100 | |
101 /* #define VIRT_ADDR_VARIES */ | |
102 | |
103 /* Define C_ALLOCA if this machine does not support a true alloca | |
104 and the one written in C should be used instead. | |
105 Define HAVE_ALLOCA to say that the system provides a properly | |
106 working alloca function and it should be used. | |
107 Define neither one if an assembler-language alloca | |
108 in the file alloca.s should be used. */ | |
109 | |
110 /* #define C_ALLOCA */ | |
111 #define HAVE_ALLOCA | |
112 | |
113 /* Name of file the to look in | |
114 for the kernel symbol table (for load average) */ | |
115 | |
116 #undef KERNEL_FILE | |
117 #define KERNEL_FILE "/dynix" | |
118 | |
119 /* Avoids a compiler bug */ | |
120 | |
121 #define TAHOE_REGISTER_BUG | |
122 | |
123 /* Say that the text segment of a.out includes the header; | |
124 the header actually occupies the first few bytes of the text segment | |
125 and is counted in hdr.a_text. Furthermore, the value written | |
126 in the a_text in the file must have N_ADDRADJ added to it. */ | |
127 | |
128 #define A_TEXT_OFFSET(HDR) (sizeof (HDR) + N_ADDRADJ (HDR)) | |
129 | |
130 /* This is the offset of the executable's text, from the start of the file. */ | |
131 | |
132 #define A_TEXT_SEEK(HDR) (N_TXTOFF (hdr) + sizeof (hdr)) | |
133 | |
134 /* (short) negative-int doesn't sign-extend correctly */ | |
135 #define SHORT_CAST_BUG | |
136 | |
137 /* Cause compilations to be done in parallel in ymakefile. */ | |
138 #define MAKE_PARALLEL & | |
139 | |
140 /* Say that mailer interlocking uses flock. */ | |
141 #define MAIL_USE_FLOCK | |
142 | |
143 /* On many 4.2-based systems, there's a rather tricky bug | |
144 * with the interpretation of the pid/pgrp value given to | |
145 * the F_SETOWN fcntl() call. It works as documented EXCEPT | |
146 * when applied to filedescriptors for sockets, in which case | |
147 * the sign must be reversed. If your emacs subprocesses get | |
148 * SIGIO's when they shouldn't, while running on a socket | |
149 * (e.g. under X windows), you should probably define this. | |
150 */ | |
151 | |
152 #define F_SETOWN_SOCK_NEG | |
153 | |
154 /* Some really obscure 4.2-based systems (like Sequent DYNIX) | |
155 * do not support asynchronous I/O (using SIGIO) on sockets, | |
156 * even though it works fine on tty's. If you have one of | |
157 * these systems, define the following, and then use it in | |
158 * config.h (or elsewhere) to decide when (not) to use SIGIO. | |
159 */ | |
160 | |
161 #define NO_SOCK_SIGIO | |
162 | |
163 /* Define how to search all pty names. | |
164 This is for Dynix 3.0; delete next 5 definitions for older systems. */ | |
165 | |
166 #define PTY_MAJOR "pqrstuvwPQRSTUVW" | |
167 #define PTY_MINOR "0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ" | |
168 #define PTY_ITERATION \ | |
169 register int ma, mi; \ | |
170 for (ma = 0; ma < sizeof(PTY_MAJOR) - 1; ma++) \ | |
171 for (mi = 0; mi < sizeof(PTY_MINOR) - 1; mi++) | |
172 #define PTY_NAME_SPRINTF \ | |
173 sprintf (ptyname, "/dev/pty%c%c", PTY_MAJOR[ma], PTY_MINOR[mi]); | |
174 #define PTY_TTY_NAME_SPRINTF \ | |
175 sprintf (ptyname, "/dev/tty%c%c", PTY_MAJOR[ma], PTY_MINOR[mi]); |