Mercurial > emacs
annotate doc/lispref/variables.texi @ 102802:4f534a4fed53
Regenerate.
author | Chong Yidong <cyd@stupidchicken.com> |
---|---|
date | Tue, 31 Mar 2009 00:19:56 +0000 |
parents | 00d32e2488cf |
children | a447859a557b |
rev | line source |
---|---|
84109 | 1 @c -*-texinfo-*- |
2 @c This is part of the GNU Emacs Lisp Reference Manual. | |
3 @c Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1998, 1999, 2000, | |
100974 | 4 @c 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. |
84109 | 5 @c See the file elisp.texi for copying conditions. |
84116
0ba80d073e27
(setfilename): Go up one more level to ../../info.
Glenn Morris <rgm@gnu.org>
parents:
84109
diff
changeset
|
6 @setfilename ../../info/variables |
84109 | 7 @node Variables, Functions, Control Structures, Top |
8 @chapter Variables | |
9 @cindex variable | |
10 | |
11 A @dfn{variable} is a name used in a program to stand for a value. | |
12 Nearly all programming languages have variables of some sort. In the | |
13 text of a Lisp program, variables are written using the syntax for | |
14 symbols. | |
15 | |
16 In Lisp, unlike most programming languages, programs are represented | |
17 primarily as Lisp objects and only secondarily as text. The Lisp | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
18 objects used for variables are symbols: the symbol name is the |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
19 variable name, and the variable's value is stored in the value cell of |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
20 the symbol. The use of a symbol as a variable is independent of its |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
21 use as a function name. @xref{Symbol Components}. |
84109 | 22 |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
23 The textual form of a Lisp program is given by the read syntax of |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
24 the Lisp objects that constitute the program. Hence, a variable in a |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
25 textual Lisp program is written using the read syntax for the symbol |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
26 representing the variable. |
84109 | 27 |
28 @menu | |
29 * Global Variables:: Variable values that exist permanently, everywhere. | |
30 * Constant Variables:: Certain "variables" have values that never change. | |
31 * Local Variables:: Variable values that exist only temporarily. | |
32 * Void Variables:: Symbols that lack values. | |
33 * Defining Variables:: A definition says a symbol is used as a variable. | |
34 * Tips for Defining:: Things you should think about when you | |
35 define a variable. | |
36 * Accessing Variables:: Examining values of variables whose names | |
37 are known only at run time. | |
38 * Setting Variables:: Storing new values in variables. | |
39 * Variable Scoping:: How Lisp chooses among local and global values. | |
40 * Buffer-Local Variables:: Variable values in effect only in one buffer. | |
100710
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
41 * File Local Variables:: Handling local variable lists in files. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
42 * Directory Local Variables:: Local variables common to all files in a directory. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
43 * Frame-Local Variables:: Frame-local bindings for variables. |
84109 | 44 * Variable Aliases:: Variables that are aliases for other variables. |
45 * Variables with Restricted Values:: Non-constant variables whose value can | |
46 @emph{not} be an arbitrary Lisp object. | |
47 @end menu | |
48 | |
49 @node Global Variables | |
50 @section Global Variables | |
51 @cindex global variable | |
52 | |
53 The simplest way to use a variable is @dfn{globally}. This means that | |
54 the variable has just one value at a time, and this value is in effect | |
55 (at least for the moment) throughout the Lisp system. The value remains | |
56 in effect until you specify a new one. When a new value replaces the | |
57 old one, no trace of the old value remains in the variable. | |
58 | |
59 You specify a value for a symbol with @code{setq}. For example, | |
60 | |
61 @example | |
62 (setq x '(a b)) | |
63 @end example | |
64 | |
65 @noindent | |
66 gives the variable @code{x} the value @code{(a b)}. Note that | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
67 @code{setq} is a special form (@pxref{Special Forms}); it does not |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
68 evaluate its first argument, the name of the variable, but it does |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
69 evaluate the second argument, the new value. |
84109 | 70 |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
71 Once the variable has a value, you can refer to it by using the |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
72 symbol itself as an expression. Thus, |
84109 | 73 |
74 @example | |
75 @group | |
76 x @result{} (a b) | |
77 @end group | |
78 @end example | |
79 | |
80 @noindent | |
81 assuming the @code{setq} form shown above has already been executed. | |
82 | |
83 If you do set the same variable again, the new value replaces the old | |
84 one: | |
85 | |
86 @example | |
87 @group | |
88 x | |
89 @result{} (a b) | |
90 @end group | |
91 @group | |
92 (setq x 4) | |
93 @result{} 4 | |
94 @end group | |
95 @group | |
96 x | |
97 @result{} 4 | |
98 @end group | |
99 @end example | |
100 | |
101 @node Constant Variables | |
102 @section Variables that Never Change | |
103 @kindex setting-constant | |
104 @cindex keyword symbol | |
105 @cindex variable with constant value | |
106 @cindex constant variables | |
107 @cindex symbol that evaluates to itself | |
108 @cindex symbol with constant value | |
109 | |
110 In Emacs Lisp, certain symbols normally evaluate to themselves. These | |
111 include @code{nil} and @code{t}, as well as any symbol whose name starts | |
112 with @samp{:} (these are called @dfn{keywords}). These symbols cannot | |
113 be rebound, nor can their values be changed. Any attempt to set or bind | |
114 @code{nil} or @code{t} signals a @code{setting-constant} error. The | |
115 same is true for a keyword (a symbol whose name starts with @samp{:}), | |
116 if it is interned in the standard obarray, except that setting such a | |
117 symbol to itself is not an error. | |
118 | |
119 @example | |
120 @group | |
121 nil @equiv{} 'nil | |
122 @result{} nil | |
123 @end group | |
124 @group | |
125 (setq nil 500) | |
126 @error{} Attempt to set constant symbol: nil | |
127 @end group | |
128 @end example | |
129 | |
130 @defun keywordp object | |
131 function returns @code{t} if @var{object} is a symbol whose name | |
132 starts with @samp{:}, interned in the standard obarray, and returns | |
133 @code{nil} otherwise. | |
134 @end defun | |
135 | |
136 @node Local Variables | |
137 @section Local Variables | |
138 @cindex binding local variables | |
139 @cindex local variables | |
140 @cindex local binding | |
141 @cindex global binding | |
142 | |
143 Global variables have values that last until explicitly superseded | |
144 with new values. Sometimes it is useful to create variable values that | |
145 exist temporarily---only until a certain part of the program finishes. | |
146 These values are called @dfn{local}, and the variables so used are | |
147 called @dfn{local variables}. | |
148 | |
149 For example, when a function is called, its argument variables receive | |
150 new local values that last until the function exits. The @code{let} | |
151 special form explicitly establishes new local values for specified | |
152 variables; these last until exit from the @code{let} form. | |
153 | |
154 @cindex shadowing of variables | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
155 Establishing a local value saves away the variable's previous value |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
156 (or lack of one). We say that the previous value is @dfn{shadowed} |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
157 and @dfn{not visible}. Both global and local values may be shadowed |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
158 (@pxref{Scope}). After the life span of the local value is over, the |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
159 previous value (or lack of one) is restored. |
84109 | 160 |
161 If you set a variable (such as with @code{setq}) while it is local, | |
162 this replaces the local value; it does not alter the global value, or | |
163 previous local values, that are shadowed. To model this behavior, we | |
164 speak of a @dfn{local binding} of the variable as well as a local value. | |
165 | |
166 The local binding is a conceptual place that holds a local value. | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
167 Entering a function, or a special form such as @code{let}, creates the |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
168 local binding; exiting the function or the @code{let} removes the |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
169 local binding. While the local binding lasts, the variable's value is |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
170 stored within it. Using @code{setq} or @code{set} while there is a |
84109 | 171 local binding stores a different value into the local binding; it does |
172 not create a new binding. | |
173 | |
174 We also speak of the @dfn{global binding}, which is where | |
175 (conceptually) the global value is kept. | |
176 | |
177 @cindex current binding | |
178 A variable can have more than one local binding at a time (for | |
179 example, if there are nested @code{let} forms that bind it). In such a | |
180 case, the most recently created local binding that still exists is the | |
181 @dfn{current binding} of the variable. (This rule is called | |
182 @dfn{dynamic scoping}; see @ref{Variable Scoping}.) If there are no | |
183 local bindings, the variable's global binding is its current binding. | |
184 We sometimes call the current binding the @dfn{most-local existing | |
185 binding}, for emphasis. Ordinary evaluation of a symbol always returns | |
186 the value of its current binding. | |
187 | |
188 The special forms @code{let} and @code{let*} exist to create | |
189 local bindings. | |
190 | |
191 @defspec let (bindings@dots{}) forms@dots{} | |
192 This special form binds variables according to @var{bindings} and then | |
193 evaluates all of the @var{forms} in textual order. The @code{let}-form | |
194 returns the value of the last form in @var{forms}. | |
195 | |
196 Each of the @var{bindings} is either @w{(i) a} symbol, in which case | |
197 that symbol is bound to @code{nil}; or @w{(ii) a} list of the form | |
198 @code{(@var{symbol} @var{value-form})}, in which case @var{symbol} is | |
199 bound to the result of evaluating @var{value-form}. If @var{value-form} | |
200 is omitted, @code{nil} is used. | |
201 | |
202 All of the @var{value-form}s in @var{bindings} are evaluated in the | |
203 order they appear and @emph{before} binding any of the symbols to them. | |
204 Here is an example of this: @code{z} is bound to the old value of | |
205 @code{y}, which is 2, not the new value of @code{y}, which is 1. | |
206 | |
207 @example | |
208 @group | |
209 (setq y 2) | |
210 @result{} 2 | |
211 @end group | |
212 @group | |
213 (let ((y 1) | |
214 (z y)) | |
215 (list y z)) | |
216 @result{} (1 2) | |
217 @end group | |
218 @end example | |
219 @end defspec | |
220 | |
221 @defspec let* (bindings@dots{}) forms@dots{} | |
222 This special form is like @code{let}, but it binds each variable right | |
223 after computing its local value, before computing the local value for | |
224 the next variable. Therefore, an expression in @var{bindings} can | |
225 reasonably refer to the preceding symbols bound in this @code{let*} | |
226 form. Compare the following example with the example above for | |
227 @code{let}. | |
228 | |
229 @example | |
230 @group | |
231 (setq y 2) | |
232 @result{} 2 | |
233 @end group | |
234 @group | |
235 (let* ((y 1) | |
236 (z y)) ; @r{Use the just-established value of @code{y}.} | |
237 (list y z)) | |
238 @result{} (1 1) | |
239 @end group | |
240 @end example | |
241 @end defspec | |
242 | |
243 Here is a complete list of the other facilities that create local | |
244 bindings: | |
245 | |
246 @itemize @bullet | |
247 @item | |
248 Function calls (@pxref{Functions}). | |
249 | |
250 @item | |
251 Macro calls (@pxref{Macros}). | |
252 | |
253 @item | |
254 @code{condition-case} (@pxref{Errors}). | |
255 @end itemize | |
256 | |
257 Variables can also have buffer-local bindings (@pxref{Buffer-Local | |
85688 | 258 Variables}); a few variables have terminal-local bindings |
259 (@pxref{Multiple Displays}). These kinds of bindings work somewhat | |
260 like ordinary local bindings, but they are localized depending on | |
261 ``where'' you are in Emacs, rather than localized in time. | |
84109 | 262 |
263 @defvar max-specpdl-size | |
264 @anchor{Definition of max-specpdl-size} | |
265 @cindex variable limit error | |
266 @cindex evaluation error | |
267 @cindex infinite recursion | |
268 This variable defines the limit on the total number of local variable | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
269 bindings and @code{unwind-protect} cleanups (see @ref{Cleanups,, |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
270 Cleaning Up from Nonlocal Exits}) that are allowed before Emacs |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
271 signals an error (with data @code{"Variable binding depth exceeds |
84109 | 272 max-specpdl-size"}). |
273 | |
274 This limit, with the associated error when it is exceeded, is one way | |
275 that Lisp avoids infinite recursion on an ill-defined function. | |
276 @code{max-lisp-eval-depth} provides another limit on depth of nesting. | |
277 @xref{Definition of max-lisp-eval-depth,, Eval}. | |
278 | |
279 The default value is 1000. Entry to the Lisp debugger increases the | |
280 value, if there is little room left, to make sure the debugger itself | |
281 has room to execute. | |
282 @end defvar | |
283 | |
284 @node Void Variables | |
285 @section When a Variable is ``Void'' | |
286 @kindex void-variable | |
287 @cindex void variable | |
288 | |
289 If you have never given a symbol any value as a global variable, we | |
290 say that that symbol's global value is @dfn{void}. In other words, the | |
291 symbol's value cell does not have any Lisp object in it. If you try to | |
292 evaluate the symbol, you get a @code{void-variable} error rather than | |
293 a value. | |
294 | |
295 Note that a value of @code{nil} is not the same as void. The symbol | |
296 @code{nil} is a Lisp object and can be the value of a variable just as any | |
297 other object can be; but it is @emph{a value}. A void variable does not | |
298 have any value. | |
299 | |
300 After you have given a variable a value, you can make it void once more | |
301 using @code{makunbound}. | |
302 | |
303 @defun makunbound symbol | |
304 This function makes the current variable binding of @var{symbol} void. | |
305 Subsequent attempts to use this symbol's value as a variable will signal | |
306 the error @code{void-variable}, unless and until you set it again. | |
307 | |
308 @code{makunbound} returns @var{symbol}. | |
309 | |
310 @example | |
311 @group | |
312 (makunbound 'x) ; @r{Make the global value of @code{x} void.} | |
313 @result{} x | |
314 @end group | |
315 @group | |
316 x | |
317 @error{} Symbol's value as variable is void: x | |
318 @end group | |
319 @end example | |
320 | |
321 If @var{symbol} is locally bound, @code{makunbound} affects the most | |
322 local existing binding. This is the only way a symbol can have a void | |
323 local binding, since all the constructs that create local bindings | |
324 create them with values. In this case, the voidness lasts at most as | |
325 long as the binding does; when the binding is removed due to exit from | |
326 the construct that made it, the previous local or global binding is | |
327 reexposed as usual, and the variable is no longer void unless the newly | |
328 reexposed binding was void all along. | |
329 | |
330 @smallexample | |
331 @group | |
332 (setq x 1) ; @r{Put a value in the global binding.} | |
333 @result{} 1 | |
334 (let ((x 2)) ; @r{Locally bind it.} | |
335 (makunbound 'x) ; @r{Void the local binding.} | |
336 x) | |
337 @error{} Symbol's value as variable is void: x | |
338 @end group | |
339 @group | |
340 x ; @r{The global binding is unchanged.} | |
341 @result{} 1 | |
342 | |
343 (let ((x 2)) ; @r{Locally bind it.} | |
344 (let ((x 3)) ; @r{And again.} | |
345 (makunbound 'x) ; @r{Void the innermost-local binding.} | |
346 x)) ; @r{And refer: it's void.} | |
347 @error{} Symbol's value as variable is void: x | |
348 @end group | |
349 | |
350 @group | |
351 (let ((x 2)) | |
352 (let ((x 3)) | |
353 (makunbound 'x)) ; @r{Void inner binding, then remove it.} | |
354 x) ; @r{Now outer @code{let} binding is visible.} | |
355 @result{} 2 | |
356 @end group | |
357 @end smallexample | |
358 @end defun | |
359 | |
360 A variable that has been made void with @code{makunbound} is | |
361 indistinguishable from one that has never received a value and has | |
362 always been void. | |
363 | |
364 You can use the function @code{boundp} to test whether a variable is | |
365 currently void. | |
366 | |
367 @defun boundp variable | |
368 @code{boundp} returns @code{t} if @var{variable} (a symbol) is not void; | |
369 more precisely, if its current binding is not void. It returns | |
370 @code{nil} otherwise. | |
371 | |
372 @smallexample | |
373 @group | |
374 (boundp 'abracadabra) ; @r{Starts out void.} | |
375 @result{} nil | |
376 @end group | |
377 @group | |
378 (let ((abracadabra 5)) ; @r{Locally bind it.} | |
379 (boundp 'abracadabra)) | |
380 @result{} t | |
381 @end group | |
382 @group | |
383 (boundp 'abracadabra) ; @r{Still globally void.} | |
384 @result{} nil | |
385 @end group | |
386 @group | |
387 (setq abracadabra 5) ; @r{Make it globally nonvoid.} | |
388 @result{} 5 | |
389 @end group | |
390 @group | |
391 (boundp 'abracadabra) | |
392 @result{} t | |
393 @end group | |
394 @end smallexample | |
395 @end defun | |
396 | |
397 @node Defining Variables | |
398 @section Defining Global Variables | |
399 @cindex variable definition | |
400 | |
401 You may announce your intention to use a symbol as a global variable | |
402 with a @dfn{variable definition}: a special form, either @code{defconst} | |
403 or @code{defvar}. | |
404 | |
405 In Emacs Lisp, definitions serve three purposes. First, they inform | |
406 people who read the code that certain symbols are @emph{intended} to be | |
407 used a certain way (as variables). Second, they inform the Lisp system | |
408 of these things, supplying a value and documentation. Third, they | |
409 provide information to utilities such as @code{etags} and | |
410 @code{make-docfile}, which create data bases of the functions and | |
411 variables in a program. | |
412 | |
413 The difference between @code{defconst} and @code{defvar} is primarily | |
414 a matter of intent, serving to inform human readers of whether the value | |
415 should ever change. Emacs Lisp does not restrict the ways in which a | |
416 variable can be used based on @code{defconst} or @code{defvar} | |
417 declarations. However, it does make a difference for initialization: | |
418 @code{defconst} unconditionally initializes the variable, while | |
419 @code{defvar} initializes it only if it is void. | |
420 | |
421 @ignore | |
422 One would expect user option variables to be defined with | |
423 @code{defconst}, since programs do not change them. Unfortunately, this | |
424 has bad results if the definition is in a library that is not preloaded: | |
425 @code{defconst} would override any prior value when the library is | |
426 loaded. Users would like to be able to set user options in their init | |
427 files, and override the default values given in the definitions. For | |
428 this reason, user options must be defined with @code{defvar}. | |
429 @end ignore | |
430 | |
431 @defspec defvar symbol [value [doc-string]] | |
432 This special form defines @var{symbol} as a variable and can also | |
433 initialize and document it. The definition informs a person reading | |
434 your code that @var{symbol} is used as a variable that might be set or | |
435 changed. Note that @var{symbol} is not evaluated; the symbol to be | |
436 defined must appear explicitly in the @code{defvar}. | |
437 | |
438 If @var{symbol} is void and @var{value} is specified, @code{defvar} | |
439 evaluates it and sets @var{symbol} to the result. But if @var{symbol} | |
440 already has a value (i.e., it is not void), @var{value} is not even | |
441 evaluated, and @var{symbol}'s value remains unchanged. If @var{value} | |
442 is omitted, the value of @var{symbol} is not changed in any case. | |
443 | |
444 If @var{symbol} has a buffer-local binding in the current buffer, | |
445 @code{defvar} operates on the default value, which is buffer-independent, | |
446 not the current (buffer-local) binding. It sets the default value if | |
447 the default value is void. @xref{Buffer-Local Variables}. | |
448 | |
449 When you evaluate a top-level @code{defvar} form with @kbd{C-M-x} in | |
450 Emacs Lisp mode (@code{eval-defun}), a special feature of | |
451 @code{eval-defun} arranges to set the variable unconditionally, without | |
452 testing whether its value is void. | |
453 | |
454 If the @var{doc-string} argument appears, it specifies the documentation | |
455 for the variable. (This opportunity to specify documentation is one of | |
456 the main benefits of defining the variable.) The documentation is | |
457 stored in the symbol's @code{variable-documentation} property. The | |
458 Emacs help functions (@pxref{Documentation}) look for this property. | |
459 | |
99898
d9a2d006b717
(Defining Variables): Note that `*' is not necessary if defcustom is
Chong Yidong <cyd@stupidchicken.com>
parents:
98896
diff
changeset
|
460 If the documentation string begins with the character @samp{*}, Emacs |
d9a2d006b717
(Defining Variables): Note that `*' is not necessary if defcustom is
Chong Yidong <cyd@stupidchicken.com>
parents:
98896
diff
changeset
|
461 allows users to set it interactively using the @code{set-variable} |
d9a2d006b717
(Defining Variables): Note that `*' is not necessary if defcustom is
Chong Yidong <cyd@stupidchicken.com>
parents:
98896
diff
changeset
|
462 command. However, you should nearly always use @code{defcustom} |
d9a2d006b717
(Defining Variables): Note that `*' is not necessary if defcustom is
Chong Yidong <cyd@stupidchicken.com>
parents:
98896
diff
changeset
|
463 instead of @code{defvar} to define such variables, so that users can |
d9a2d006b717
(Defining Variables): Note that `*' is not necessary if defcustom is
Chong Yidong <cyd@stupidchicken.com>
parents:
98896
diff
changeset
|
464 use @kbd{M-x customize} and related commands to set them. In that |
d9a2d006b717
(Defining Variables): Note that `*' is not necessary if defcustom is
Chong Yidong <cyd@stupidchicken.com>
parents:
98896
diff
changeset
|
465 case, it is not necessary to begin the documentation string with |
d9a2d006b717
(Defining Variables): Note that `*' is not necessary if defcustom is
Chong Yidong <cyd@stupidchicken.com>
parents:
98896
diff
changeset
|
466 @samp{*}. @xref{Customization}. |
84109 | 467 |
468 Here are some examples. This form defines @code{foo} but does not | |
469 initialize it: | |
470 | |
471 @example | |
472 @group | |
473 (defvar foo) | |
474 @result{} foo | |
475 @end group | |
476 @end example | |
477 | |
478 This example initializes the value of @code{bar} to @code{23}, and gives | |
479 it a documentation string: | |
480 | |
481 @example | |
482 @group | |
483 (defvar bar 23 | |
484 "The normal weight of a bar.") | |
485 @result{} bar | |
486 @end group | |
487 @end example | |
488 | |
489 The following form changes the documentation string for @code{bar}, | |
490 making it a user option, but does not change the value, since @code{bar} | |
491 already has a value. (The addition @code{(1+ nil)} would get an error | |
492 if it were evaluated, but since it is not evaluated, there is no error.) | |
493 | |
494 @example | |
495 @group | |
496 (defvar bar (1+ nil) | |
497 "*The normal weight of a bar.") | |
498 @result{} bar | |
499 @end group | |
500 @group | |
501 bar | |
502 @result{} 23 | |
503 @end group | |
504 @end example | |
505 | |
506 Here is an equivalent expression for the @code{defvar} special form: | |
507 | |
508 @example | |
509 @group | |
510 (defvar @var{symbol} @var{value} @var{doc-string}) | |
511 @equiv{} | |
512 (progn | |
513 (if (not (boundp '@var{symbol})) | |
514 (setq @var{symbol} @var{value})) | |
515 (if '@var{doc-string} | |
516 (put '@var{symbol} 'variable-documentation '@var{doc-string})) | |
517 '@var{symbol}) | |
518 @end group | |
519 @end example | |
520 | |
521 The @code{defvar} form returns @var{symbol}, but it is normally used | |
522 at top level in a file where its value does not matter. | |
523 @end defspec | |
524 | |
525 @defspec defconst symbol value [doc-string] | |
526 This special form defines @var{symbol} as a value and initializes it. | |
527 It informs a person reading your code that @var{symbol} has a standard | |
528 global value, established here, that should not be changed by the user | |
529 or by other programs. Note that @var{symbol} is not evaluated; the | |
530 symbol to be defined must appear explicitly in the @code{defconst}. | |
531 | |
532 @code{defconst} always evaluates @var{value}, and sets the value of | |
533 @var{symbol} to the result. If @var{symbol} does have a buffer-local | |
534 binding in the current buffer, @code{defconst} sets the default value, | |
535 not the buffer-local value. (But you should not be making | |
536 buffer-local bindings for a symbol that is defined with | |
537 @code{defconst}.) | |
538 | |
539 Here, @code{pi} is a constant that presumably ought not to be changed | |
540 by anyone (attempts by the Indiana State Legislature notwithstanding). | |
541 As the second form illustrates, however, this is only advisory. | |
542 | |
543 @example | |
544 @group | |
545 (defconst pi 3.1415 "Pi to five places.") | |
546 @result{} pi | |
547 @end group | |
548 @group | |
549 (setq pi 3) | |
550 @result{} pi | |
551 @end group | |
552 @group | |
553 pi | |
554 @result{} 3 | |
555 @end group | |
556 @end example | |
557 @end defspec | |
558 | |
559 @defun user-variable-p variable | |
560 @cindex user option | |
561 This function returns @code{t} if @var{variable} is a user option---a | |
562 variable intended to be set by the user for customization---and | |
563 @code{nil} otherwise. (Variables other than user options exist for the | |
564 internal purposes of Lisp programs, and users need not know about them.) | |
565 | |
566 User option variables are distinguished from other variables either | |
567 though being declared using @code{defcustom}@footnote{They may also be | |
568 declared equivalently in @file{cus-start.el}.} or by the first character | |
569 of their @code{variable-documentation} property. If the property exists | |
570 and is a string, and its first character is @samp{*}, then the variable | |
571 is a user option. Aliases of user options are also user options. | |
572 @end defun | |
573 | |
574 @kindex variable-interactive | |
575 If a user option variable has a @code{variable-interactive} property, | |
576 the @code{set-variable} command uses that value to control reading the | |
577 new value for the variable. The property's value is used as if it were | |
578 specified in @code{interactive} (@pxref{Using Interactive}). However, | |
579 this feature is largely obsoleted by @code{defcustom} | |
580 (@pxref{Customization}). | |
581 | |
582 @strong{Warning:} If the @code{defconst} and @code{defvar} special | |
583 forms are used while the variable has a local binding (made with | |
584 @code{let}, or a function argument), they set the local-binding's | |
585 value; the top-level binding is not changed. This is not what you | |
586 usually want. To prevent it, use these special forms at top level in | |
587 a file, where normally no local binding is in effect, and make sure to | |
588 load the file before making a local binding for the variable. | |
589 | |
590 @node Tips for Defining | |
591 @section Tips for Defining Variables Robustly | |
592 | |
593 When you define a variable whose value is a function, or a list of | |
594 functions, use a name that ends in @samp{-function} or | |
595 @samp{-functions}, respectively. | |
596 | |
597 There are several other variable name conventions; | |
598 here is a complete list: | |
599 | |
600 @table @samp | |
601 @item @dots{}-hook | |
602 The variable is a normal hook (@pxref{Hooks}). | |
603 | |
604 @item @dots{}-function | |
605 The value is a function. | |
606 | |
607 @item @dots{}-functions | |
608 The value is a list of functions. | |
609 | |
610 @item @dots{}-form | |
611 The value is a form (an expression). | |
612 | |
613 @item @dots{}-forms | |
614 The value is a list of forms (expressions). | |
615 | |
616 @item @dots{}-predicate | |
617 The value is a predicate---a function of one argument that returns | |
618 non-@code{nil} for ``good'' arguments and @code{nil} for ``bad'' | |
619 arguments. | |
620 | |
621 @item @dots{}-flag | |
622 The value is significant only as to whether it is @code{nil} or not. | |
101143
5a1ab0e91281
Qualify the `-flag' convention.
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
100974
diff
changeset
|
623 Since such variables often end up acquiring more values over time, |
101144 | 624 this convention is not strongly recommended. |
84109 | 625 |
626 @item @dots{}-program | |
627 The value is a program name. | |
628 | |
629 @item @dots{}-command | |
630 The value is a whole shell command. | |
631 | |
632 @item @dots{}-switches | |
633 The value specifies options for a command. | |
634 @end table | |
635 | |
636 When you define a variable, always consider whether you should mark | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
637 it as ``safe'' or ``risky''; see @ref{File Local Variables}. |
84109 | 638 |
639 When defining and initializing a variable that holds a complicated | |
640 value (such as a keymap with bindings in it), it's best to put the | |
641 entire computation of the value into the @code{defvar}, like this: | |
642 | |
643 @example | |
644 (defvar my-mode-map | |
645 (let ((map (make-sparse-keymap))) | |
646 (define-key map "\C-c\C-a" 'my-command) | |
647 @dots{} | |
648 map) | |
649 @var{docstring}) | |
650 @end example | |
651 | |
652 @noindent | |
653 This method has several benefits. First, if the user quits while | |
654 loading the file, the variable is either still uninitialized or | |
655 initialized properly, never in-between. If it is still uninitialized, | |
656 reloading the file will initialize it properly. Second, reloading the | |
657 file once the variable is initialized will not alter it; that is | |
658 important if the user has run hooks to alter part of the contents (such | |
659 as, to rebind keys). Third, evaluating the @code{defvar} form with | |
660 @kbd{C-M-x} @emph{will} reinitialize the map completely. | |
661 | |
662 Putting so much code in the @code{defvar} form has one disadvantage: | |
663 it puts the documentation string far away from the line which names the | |
664 variable. Here's a safe way to avoid that: | |
665 | |
666 @example | |
667 (defvar my-mode-map nil | |
668 @var{docstring}) | |
669 (unless my-mode-map | |
670 (let ((map (make-sparse-keymap))) | |
671 (define-key map "\C-c\C-a" 'my-command) | |
672 @dots{} | |
673 (setq my-mode-map map))) | |
674 @end example | |
675 | |
676 @noindent | |
677 This has all the same advantages as putting the initialization inside | |
678 the @code{defvar}, except that you must type @kbd{C-M-x} twice, once on | |
679 each form, if you do want to reinitialize the variable. | |
680 | |
681 But be careful not to write the code like this: | |
682 | |
683 @example | |
684 (defvar my-mode-map nil | |
685 @var{docstring}) | |
686 (unless my-mode-map | |
687 (setq my-mode-map (make-sparse-keymap)) | |
688 (define-key my-mode-map "\C-c\C-a" 'my-command) | |
689 @dots{}) | |
690 @end example | |
691 | |
692 @noindent | |
693 This code sets the variable, then alters it, but it does so in more than | |
694 one step. If the user quits just after the @code{setq}, that leaves the | |
695 variable neither correctly initialized nor void nor @code{nil}. Once | |
696 that happens, reloading the file will not initialize the variable; it | |
697 will remain incomplete. | |
698 | |
699 @node Accessing Variables | |
700 @section Accessing Variable Values | |
701 | |
702 The usual way to reference a variable is to write the symbol which | |
703 names it (@pxref{Symbol Forms}). This requires you to specify the | |
704 variable name when you write the program. Usually that is exactly what | |
705 you want to do. Occasionally you need to choose at run time which | |
706 variable to reference; then you can use @code{symbol-value}. | |
707 | |
708 @defun symbol-value symbol | |
709 This function returns the value of @var{symbol}. This is the value in | |
710 the innermost local binding of the symbol, or its global value if it | |
711 has no local bindings. | |
712 | |
713 @example | |
714 @group | |
715 (setq abracadabra 5) | |
716 @result{} 5 | |
717 @end group | |
718 @group | |
719 (setq foo 9) | |
720 @result{} 9 | |
721 @end group | |
722 | |
723 @group | |
724 ;; @r{Here the symbol @code{abracadabra}} | |
725 ;; @r{is the symbol whose value is examined.} | |
726 (let ((abracadabra 'foo)) | |
727 (symbol-value 'abracadabra)) | |
728 @result{} foo | |
729 @end group | |
730 | |
731 @group | |
732 ;; @r{Here, the value of @code{abracadabra},} | |
733 ;; @r{which is @code{foo},} | |
734 ;; @r{is the symbol whose value is examined.} | |
735 (let ((abracadabra 'foo)) | |
736 (symbol-value abracadabra)) | |
737 @result{} 9 | |
738 @end group | |
739 | |
740 @group | |
741 (symbol-value 'abracadabra) | |
742 @result{} 5 | |
743 @end group | |
744 @end example | |
745 | |
746 A @code{void-variable} error is signaled if the current binding of | |
747 @var{symbol} is void. | |
748 @end defun | |
749 | |
750 @node Setting Variables | |
751 @section How to Alter a Variable Value | |
752 | |
753 The usual way to change the value of a variable is with the special | |
754 form @code{setq}. When you need to compute the choice of variable at | |
755 run time, use the function @code{set}. | |
756 | |
757 @defspec setq [symbol form]@dots{} | |
758 This special form is the most common method of changing a variable's | |
759 value. Each @var{symbol} is given a new value, which is the result of | |
760 evaluating the corresponding @var{form}. The most-local existing | |
761 binding of the symbol is changed. | |
762 | |
763 @code{setq} does not evaluate @var{symbol}; it sets the symbol that you | |
764 write. We say that this argument is @dfn{automatically quoted}. The | |
765 @samp{q} in @code{setq} stands for ``quoted.'' | |
766 | |
767 The value of the @code{setq} form is the value of the last @var{form}. | |
768 | |
769 @example | |
770 @group | |
771 (setq x (1+ 2)) | |
772 @result{} 3 | |
773 @end group | |
774 x ; @r{@code{x} now has a global value.} | |
775 @result{} 3 | |
776 @group | |
777 (let ((x 5)) | |
778 (setq x 6) ; @r{The local binding of @code{x} is set.} | |
779 x) | |
780 @result{} 6 | |
781 @end group | |
782 x ; @r{The global value is unchanged.} | |
783 @result{} 3 | |
784 @end example | |
785 | |
786 Note that the first @var{form} is evaluated, then the first | |
787 @var{symbol} is set, then the second @var{form} is evaluated, then the | |
788 second @var{symbol} is set, and so on: | |
789 | |
790 @example | |
791 @group | |
792 (setq x 10 ; @r{Notice that @code{x} is set before} | |
793 y (1+ x)) ; @r{the value of @code{y} is computed.} | |
794 @result{} 11 | |
795 @end group | |
796 @end example | |
797 @end defspec | |
798 | |
799 @defun set symbol value | |
800 This function sets @var{symbol}'s value to @var{value}, then returns | |
801 @var{value}. Since @code{set} is a function, the expression written for | |
802 @var{symbol} is evaluated to obtain the symbol to set. | |
803 | |
804 The most-local existing binding of the variable is the binding that is | |
805 set; shadowed bindings are not affected. | |
806 | |
807 @example | |
808 @group | |
809 (set one 1) | |
810 @error{} Symbol's value as variable is void: one | |
811 @end group | |
812 @group | |
813 (set 'one 1) | |
814 @result{} 1 | |
815 @end group | |
816 @group | |
817 (set 'two 'one) | |
818 @result{} one | |
819 @end group | |
820 @group | |
821 (set two 2) ; @r{@code{two} evaluates to symbol @code{one}.} | |
822 @result{} 2 | |
823 @end group | |
824 @group | |
825 one ; @r{So it is @code{one} that was set.} | |
826 @result{} 2 | |
827 (let ((one 1)) ; @r{This binding of @code{one} is set,} | |
828 (set 'one 3) ; @r{not the global value.} | |
829 one) | |
830 @result{} 3 | |
831 @end group | |
832 @group | |
833 one | |
834 @result{} 2 | |
835 @end group | |
836 @end example | |
837 | |
838 If @var{symbol} is not actually a symbol, a @code{wrong-type-argument} | |
839 error is signaled. | |
840 | |
841 @example | |
842 (set '(x y) 'z) | |
843 @error{} Wrong type argument: symbolp, (x y) | |
844 @end example | |
845 | |
846 Logically speaking, @code{set} is a more fundamental primitive than | |
847 @code{setq}. Any use of @code{setq} can be trivially rewritten to use | |
848 @code{set}; @code{setq} could even be defined as a macro, given the | |
849 availability of @code{set}. However, @code{set} itself is rarely used; | |
850 beginners hardly need to know about it. It is useful only for choosing | |
851 at run time which variable to set. For example, the command | |
852 @code{set-variable}, which reads a variable name from the user and then | |
853 sets the variable, needs to use @code{set}. | |
854 | |
855 @cindex CL note---@code{set} local | |
856 @quotation | |
857 @b{Common Lisp note:} In Common Lisp, @code{set} always changes the | |
858 symbol's ``special'' or dynamic value, ignoring any lexical bindings. | |
859 In Emacs Lisp, all variables and all bindings are dynamic, so @code{set} | |
860 always affects the most local existing binding. | |
861 @end quotation | |
862 @end defun | |
863 | |
864 @node Variable Scoping | |
865 @section Scoping Rules for Variable Bindings | |
866 | |
867 A given symbol @code{foo} can have several local variable bindings, | |
868 established at different places in the Lisp program, as well as a global | |
869 binding. The most recently established binding takes precedence over | |
870 the others. | |
871 | |
872 @cindex scope | |
873 @cindex extent | |
874 @cindex dynamic scoping | |
875 @cindex lexical scoping | |
876 Local bindings in Emacs Lisp have @dfn{indefinite scope} and | |
877 @dfn{dynamic extent}. @dfn{Scope} refers to @emph{where} textually in | |
878 the source code the binding can be accessed. ``Indefinite scope'' means | |
879 that any part of the program can potentially access the variable | |
880 binding. @dfn{Extent} refers to @emph{when}, as the program is | |
881 executing, the binding exists. ``Dynamic extent'' means that the binding | |
882 lasts as long as the activation of the construct that established it. | |
883 | |
884 The combination of dynamic extent and indefinite scope is called | |
885 @dfn{dynamic scoping}. By contrast, most programming languages use | |
886 @dfn{lexical scoping}, in which references to a local variable must be | |
887 located textually within the function or block that binds the variable. | |
888 | |
889 @cindex CL note---special variables | |
890 @quotation | |
891 @b{Common Lisp note:} Variables declared ``special'' in Common Lisp are | |
892 dynamically scoped, like all variables in Emacs Lisp. | |
893 @end quotation | |
894 | |
895 @menu | |
896 * Scope:: Scope means where in the program a value is visible. | |
897 Comparison with other languages. | |
898 * Extent:: Extent means how long in time a value exists. | |
899 * Impl of Scope:: Two ways to implement dynamic scoping. | |
900 * Using Scoping:: How to use dynamic scoping carefully and avoid problems. | |
901 @end menu | |
902 | |
903 @node Scope | |
904 @subsection Scope | |
905 | |
906 Emacs Lisp uses @dfn{indefinite scope} for local variable bindings. | |
907 This means that any function anywhere in the program text might access a | |
908 given binding of a variable. Consider the following function | |
909 definitions: | |
910 | |
911 @example | |
912 @group | |
913 (defun binder (x) ; @r{@code{x} is bound in @code{binder}.} | |
914 (foo 5)) ; @r{@code{foo} is some other function.} | |
915 @end group | |
916 | |
917 @group | |
918 (defun user () ; @r{@code{x} is used ``free'' in @code{user}.} | |
919 (list x)) | |
920 @end group | |
921 @end example | |
922 | |
923 In a lexically scoped language, the binding of @code{x} in | |
924 @code{binder} would never be accessible in @code{user}, because | |
925 @code{user} is not textually contained within the function | |
926 @code{binder}. However, in dynamically-scoped Emacs Lisp, @code{user} | |
927 may or may not refer to the binding of @code{x} established in | |
928 @code{binder}, depending on the circumstances: | |
929 | |
930 @itemize @bullet | |
931 @item | |
932 If we call @code{user} directly without calling @code{binder} at all, | |
933 then whatever binding of @code{x} is found, it cannot come from | |
934 @code{binder}. | |
935 | |
936 @item | |
937 If we define @code{foo} as follows and then call @code{binder}, then the | |
938 binding made in @code{binder} will be seen in @code{user}: | |
939 | |
940 @example | |
941 @group | |
942 (defun foo (lose) | |
943 (user)) | |
944 @end group | |
945 @end example | |
946 | |
947 @item | |
948 However, if we define @code{foo} as follows and then call @code{binder}, | |
949 then the binding made in @code{binder} @emph{will not} be seen in | |
950 @code{user}: | |
951 | |
952 @example | |
953 (defun foo (x) | |
954 (user)) | |
955 @end example | |
956 | |
957 @noindent | |
958 Here, when @code{foo} is called by @code{binder}, it binds @code{x}. | |
959 (The binding in @code{foo} is said to @dfn{shadow} the one made in | |
960 @code{binder}.) Therefore, @code{user} will access the @code{x} bound | |
961 by @code{foo} instead of the one bound by @code{binder}. | |
962 @end itemize | |
963 | |
964 Emacs Lisp uses dynamic scoping because simple implementations of | |
965 lexical scoping are slow. In addition, every Lisp system needs to offer | |
966 dynamic scoping at least as an option; if lexical scoping is the norm, | |
967 there must be a way to specify dynamic scoping instead for a particular | |
968 variable. It might not be a bad thing for Emacs to offer both, but | |
969 implementing it with dynamic scoping only was much easier. | |
970 | |
971 @node Extent | |
972 @subsection Extent | |
973 | |
974 @dfn{Extent} refers to the time during program execution that a | |
975 variable name is valid. In Emacs Lisp, a variable is valid only while | |
976 the form that bound it is executing. This is called @dfn{dynamic | |
977 extent}. ``Local'' or ``automatic'' variables in most languages, | |
978 including C and Pascal, have dynamic extent. | |
979 | |
980 One alternative to dynamic extent is @dfn{indefinite extent}. This | |
981 means that a variable binding can live on past the exit from the form | |
982 that made the binding. Common Lisp and Scheme, for example, support | |
983 this, but Emacs Lisp does not. | |
984 | |
985 To illustrate this, the function below, @code{make-add}, returns a | |
986 function that purports to add @var{n} to its own argument @var{m}. This | |
987 would work in Common Lisp, but it does not do the job in Emacs Lisp, | |
988 because after the call to @code{make-add} exits, the variable @code{n} | |
989 is no longer bound to the actual argument 2. | |
990 | |
991 @example | |
992 (defun make-add (n) | |
993 (function (lambda (m) (+ n m)))) ; @r{Return a function.} | |
994 @result{} make-add | |
995 (fset 'add2 (make-add 2)) ; @r{Define function @code{add2}} | |
996 ; @r{with @code{(make-add 2)}.} | |
997 @result{} (lambda (m) (+ n m)) | |
998 (add2 4) ; @r{Try to add 2 to 4.} | |
999 @error{} Symbol's value as variable is void: n | |
1000 @end example | |
1001 | |
1002 @cindex closures not available | |
1003 Some Lisp dialects have ``closures,'' objects that are like functions | |
1004 but record additional variable bindings. Emacs Lisp does not have | |
1005 closures. | |
1006 | |
1007 @node Impl of Scope | |
1008 @subsection Implementation of Dynamic Scoping | |
1009 @cindex deep binding | |
1010 | |
1011 A simple sample implementation (which is not how Emacs Lisp actually | |
1012 works) may help you understand dynamic binding. This technique is | |
1013 called @dfn{deep binding} and was used in early Lisp systems. | |
1014 | |
1015 Suppose there is a stack of bindings, which are variable-value pairs. | |
1016 At entry to a function or to a @code{let} form, we can push bindings | |
1017 onto the stack for the arguments or local variables created there. We | |
1018 can pop those bindings from the stack at exit from the binding | |
1019 construct. | |
1020 | |
1021 We can find the value of a variable by searching the stack from top to | |
1022 bottom for a binding for that variable; the value from that binding is | |
1023 the value of the variable. To set the variable, we search for the | |
1024 current binding, then store the new value into that binding. | |
1025 | |
1026 As you can see, a function's bindings remain in effect as long as it | |
1027 continues execution, even during its calls to other functions. That is | |
1028 why we say the extent of the binding is dynamic. And any other function | |
1029 can refer to the bindings, if it uses the same variables while the | |
1030 bindings are in effect. That is why we say the scope is indefinite. | |
1031 | |
1032 @cindex shallow binding | |
1033 The actual implementation of variable scoping in GNU Emacs Lisp uses a | |
1034 technique called @dfn{shallow binding}. Each variable has a standard | |
1035 place in which its current value is always found---the value cell of the | |
1036 symbol. | |
1037 | |
1038 In shallow binding, setting the variable works by storing a value in | |
1039 the value cell. Creating a new binding works by pushing the old value | |
1040 (belonging to a previous binding) onto a stack, and storing the new | |
1041 local value in the value cell. Eliminating a binding works by popping | |
1042 the old value off the stack, into the value cell. | |
1043 | |
1044 We use shallow binding because it has the same results as deep | |
1045 binding, but runs faster, since there is never a need to search for a | |
1046 binding. | |
1047 | |
1048 @node Using Scoping | |
1049 @subsection Proper Use of Dynamic Scoping | |
1050 | |
1051 Binding a variable in one function and using it in another is a | |
1052 powerful technique, but if used without restraint, it can make programs | |
1053 hard to understand. There are two clean ways to use this technique: | |
1054 | |
1055 @itemize @bullet | |
1056 @item | |
1057 Use or bind the variable only in a few related functions, written close | |
1058 together in one file. Such a variable is used for communication within | |
1059 one program. | |
1060 | |
1061 You should write comments to inform other programmers that they can see | |
1062 all uses of the variable before them, and to advise them not to add uses | |
1063 elsewhere. | |
1064 | |
1065 @item | |
1066 Give the variable a well-defined, documented meaning, and make all | |
1067 appropriate functions refer to it (but not bind it or set it) wherever | |
1068 that meaning is relevant. For example, the variable | |
1069 @code{case-fold-search} is defined as ``non-@code{nil} means ignore case | |
1070 when searching''; various search and replace functions refer to it | |
1071 directly or through their subroutines, but do not bind or set it. | |
1072 | |
1073 Then you can bind the variable in other programs, knowing reliably what | |
1074 the effect will be. | |
1075 @end itemize | |
1076 | |
1077 In either case, you should define the variable with @code{defvar}. | |
1078 This helps other people understand your program by telling them to look | |
1079 for inter-function usage. It also avoids a warning from the byte | |
1080 compiler. Choose the variable's name to avoid name conflicts---don't | |
1081 use short names like @code{x}. | |
1082 | |
1083 @node Buffer-Local Variables | |
1084 @section Buffer-Local Variables | |
1085 @cindex variable, buffer-local | |
1086 @cindex buffer-local variables | |
1087 | |
1088 Global and local variable bindings are found in most programming | |
85688 | 1089 languages in one form or another. Emacs, however, also supports |
1090 additional, unusual kinds of variable binding, such as | |
1091 @dfn{buffer-local} bindings, which apply only in one buffer. Having | |
1092 different values for a variable in different buffers is an important | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1093 customization method. (Variables can also have bindings that are |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1094 local to each terminal, or to each frame. @xref{Multiple Displays}, |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1095 and @xref{Frame-Local Variables}.) |
84109 | 1096 |
1097 @menu | |
1098 * Intro to Buffer-Local:: Introduction and concepts. | |
1099 * Creating Buffer-Local:: Creating and destroying buffer-local bindings. | |
1100 * Default Value:: The default value is seen in buffers | |
1101 that don't have their own buffer-local values. | |
1102 @end menu | |
1103 | |
1104 @node Intro to Buffer-Local | |
1105 @subsection Introduction to Buffer-Local Variables | |
1106 | |
1107 A buffer-local variable has a buffer-local binding associated with a | |
1108 particular buffer. The binding is in effect when that buffer is | |
1109 current; otherwise, it is not in effect. If you set the variable while | |
1110 a buffer-local binding is in effect, the new value goes in that binding, | |
1111 so its other bindings are unchanged. This means that the change is | |
1112 visible only in the buffer where you made it. | |
1113 | |
1114 The variable's ordinary binding, which is not associated with any | |
1115 specific buffer, is called the @dfn{default binding}. In most cases, | |
1116 this is the global binding. | |
1117 | |
1118 A variable can have buffer-local bindings in some buffers but not in | |
1119 other buffers. The default binding is shared by all the buffers that | |
1120 don't have their own bindings for the variable. (This includes all | |
1121 newly-created buffers.) If you set the variable in a buffer that does | |
85688 | 1122 not have a buffer-local binding for it, this sets the default binding, |
84109 | 1123 so the new value is visible in all the buffers that see the default |
1124 binding. | |
1125 | |
1126 The most common use of buffer-local bindings is for major modes to change | |
1127 variables that control the behavior of commands. For example, C mode and | |
1128 Lisp mode both set the variable @code{paragraph-start} to specify that only | |
1129 blank lines separate paragraphs. They do this by making the variable | |
1130 buffer-local in the buffer that is being put into C mode or Lisp mode, and | |
1131 then setting it to the new value for that mode. @xref{Major Modes}. | |
1132 | |
1133 The usual way to make a buffer-local binding is with | |
1134 @code{make-local-variable}, which is what major mode commands typically | |
1135 use. This affects just the current buffer; all other buffers (including | |
1136 those yet to be created) will continue to share the default value unless | |
1137 they are explicitly given their own buffer-local bindings. | |
1138 | |
1139 @cindex automatically buffer-local | |
1140 A more powerful operation is to mark the variable as | |
1141 @dfn{automatically buffer-local} by calling | |
1142 @code{make-variable-buffer-local}. You can think of this as making the | |
1143 variable local in all buffers, even those yet to be created. More | |
1144 precisely, the effect is that setting the variable automatically makes | |
1145 the variable local to the current buffer if it is not already so. All | |
1146 buffers start out by sharing the default value of the variable as usual, | |
1147 but setting the variable creates a buffer-local binding for the current | |
1148 buffer. The new value is stored in the buffer-local binding, leaving | |
1149 the default binding untouched. This means that the default value cannot | |
1150 be changed with @code{setq} in any buffer; the only way to change it is | |
1151 with @code{setq-default}. | |
1152 | |
85688 | 1153 @strong{Warning:} When a variable has buffer-local |
84109 | 1154 bindings in one or more buffers, @code{let} rebinds the binding that's |
1155 currently in effect. For instance, if the current buffer has a | |
1156 buffer-local value, @code{let} temporarily rebinds that. If no | |
85688 | 1157 buffer-local bindings are in effect, @code{let} rebinds |
84109 | 1158 the default value. If inside the @code{let} you then change to a |
1159 different current buffer in which a different binding is in effect, | |
1160 you won't see the @code{let} binding any more. And if you exit the | |
1161 @code{let} while still in the other buffer, you won't see the | |
1162 unbinding occur (though it will occur properly). Here is an example | |
1163 to illustrate: | |
1164 | |
1165 @example | |
1166 @group | |
1167 (setq foo 'g) | |
1168 (set-buffer "a") | |
1169 (make-local-variable 'foo) | |
1170 @end group | |
1171 (setq foo 'a) | |
1172 (let ((foo 'temp)) | |
1173 ;; foo @result{} 'temp ; @r{let binding in buffer @samp{a}} | |
1174 (set-buffer "b") | |
1175 ;; foo @result{} 'g ; @r{the global value since foo is not local in @samp{b}} | |
1176 @var{body}@dots{}) | |
1177 @group | |
1178 foo @result{} 'g ; @r{exiting restored the local value in buffer @samp{a},} | |
1179 ; @r{but we don't see that in buffer @samp{b}} | |
1180 @end group | |
1181 @group | |
1182 (set-buffer "a") ; @r{verify the local value was restored} | |
1183 foo @result{} 'a | |
1184 @end group | |
1185 @end example | |
1186 | |
1187 Note that references to @code{foo} in @var{body} access the | |
1188 buffer-local binding of buffer @samp{b}. | |
1189 | |
1190 When a file specifies local variable values, these become buffer-local | |
1191 values when you visit the file. @xref{File Variables,,, emacs, The | |
1192 GNU Emacs Manual}. | |
1193 | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1194 A buffer-local variable cannot be made frame-local |
98680
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1195 (@pxref{Frame-Local Variables}) or terminal-local (@pxref{Multiple |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1196 Displays}). |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1197 |
84109 | 1198 @node Creating Buffer-Local |
1199 @subsection Creating and Deleting Buffer-Local Bindings | |
1200 | |
1201 @deffn Command make-local-variable variable | |
1202 This function creates a buffer-local binding in the current buffer for | |
1203 @var{variable} (a symbol). Other buffers are not affected. The value | |
1204 returned is @var{variable}. | |
1205 | |
1206 The buffer-local value of @var{variable} starts out as the same value | |
1207 @var{variable} previously had. If @var{variable} was void, it remains | |
1208 void. | |
1209 | |
1210 @example | |
1211 @group | |
1212 ;; @r{In buffer @samp{b1}:} | |
1213 (setq foo 5) ; @r{Affects all buffers.} | |
1214 @result{} 5 | |
1215 @end group | |
1216 @group | |
1217 (make-local-variable 'foo) ; @r{Now it is local in @samp{b1}.} | |
1218 @result{} foo | |
1219 @end group | |
1220 @group | |
1221 foo ; @r{That did not change} | |
1222 @result{} 5 ; @r{the value.} | |
1223 @end group | |
1224 @group | |
1225 (setq foo 6) ; @r{Change the value} | |
1226 @result{} 6 ; @r{in @samp{b1}.} | |
1227 @end group | |
1228 @group | |
1229 foo | |
1230 @result{} 6 | |
1231 @end group | |
1232 | |
1233 @group | |
1234 ;; @r{In buffer @samp{b2}, the value hasn't changed.} | |
1235 (save-excursion | |
1236 (set-buffer "b2") | |
1237 foo) | |
1238 @result{} 5 | |
1239 @end group | |
1240 @end example | |
1241 | |
1242 Making a variable buffer-local within a @code{let}-binding for that | |
1243 variable does not work reliably, unless the buffer in which you do this | |
1244 is not current either on entry to or exit from the @code{let}. This is | |
1245 because @code{let} does not distinguish between different kinds of | |
1246 bindings; it knows only which variable the binding was made for. | |
1247 | |
98680
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1248 If the variable is terminal-local (@pxref{Multiple Displays}), or |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1249 frame-local (@pxref{Frame-Local Variables}), this function signals an |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1250 error. Such variables cannot have buffer-local bindings as well. |
84109 | 1251 |
1252 @strong{Warning:} do not use @code{make-local-variable} for a hook | |
1253 variable. The hook variables are automatically made buffer-local as | |
1254 needed if you use the @var{local} argument to @code{add-hook} or | |
1255 @code{remove-hook}. | |
1256 @end deffn | |
1257 | |
1258 @deffn Command make-variable-buffer-local variable | |
1259 This function marks @var{variable} (a symbol) automatically | |
1260 buffer-local, so that any subsequent attempt to set it will make it | |
1261 local to the current buffer at the time. | |
1262 | |
1263 A peculiar wrinkle of this feature is that binding the variable (with | |
1264 @code{let} or other binding constructs) does not create a buffer-local | |
1265 binding for it. Only setting the variable (with @code{set} or | |
1266 @code{setq}), while the variable does not have a @code{let}-style | |
1267 binding that was made in the current buffer, does so. | |
1268 | |
1269 If @var{variable} does not have a default value, then calling this | |
1270 command will give it a default value of @code{nil}. If @var{variable} | |
1271 already has a default value, that value remains unchanged. | |
1272 Subsequently calling @code{makunbound} on @var{variable} will result | |
1273 in a void buffer-local value and leave the default value unaffected. | |
1274 | |
1275 The value returned is @var{variable}. | |
1276 | |
1277 @strong{Warning:} Don't assume that you should use | |
1278 @code{make-variable-buffer-local} for user-option variables, simply | |
1279 because users @emph{might} want to customize them differently in | |
1280 different buffers. Users can make any variable local, when they wish | |
1281 to. It is better to leave the choice to them. | |
1282 | |
1283 The time to use @code{make-variable-buffer-local} is when it is crucial | |
1284 that no two buffers ever share the same binding. For example, when a | |
1285 variable is used for internal purposes in a Lisp program which depends | |
1286 on having separate values in separate buffers, then using | |
1287 @code{make-variable-buffer-local} can be the best solution. | |
1288 @end deffn | |
1289 | |
1290 @defun local-variable-p variable &optional buffer | |
1291 This returns @code{t} if @var{variable} is buffer-local in buffer | |
1292 @var{buffer} (which defaults to the current buffer); otherwise, | |
1293 @code{nil}. | |
1294 @end defun | |
1295 | |
1296 @defun local-variable-if-set-p variable &optional buffer | |
1297 This returns @code{t} if @var{variable} will become buffer-local in | |
1298 buffer @var{buffer} (which defaults to the current buffer) if it is | |
1299 set there. | |
1300 @end defun | |
1301 | |
1302 @defun buffer-local-value variable buffer | |
1303 This function returns the buffer-local binding of @var{variable} (a | |
1304 symbol) in buffer @var{buffer}. If @var{variable} does not have a | |
1305 buffer-local binding in buffer @var{buffer}, it returns the default | |
1306 value (@pxref{Default Value}) of @var{variable} instead. | |
1307 @end defun | |
1308 | |
1309 @defun buffer-local-variables &optional buffer | |
1310 This function returns a list describing the buffer-local variables in | |
1311 buffer @var{buffer}. (If @var{buffer} is omitted, the current buffer is | |
1312 used.) It returns an association list (@pxref{Association Lists}) in | |
1313 which each element contains one buffer-local variable and its value. | |
1314 However, when a variable's buffer-local binding in @var{buffer} is void, | |
1315 then the variable appears directly in the resulting list. | |
1316 | |
1317 @example | |
1318 @group | |
1319 (make-local-variable 'foobar) | |
1320 (makunbound 'foobar) | |
1321 (make-local-variable 'bind-me) | |
1322 (setq bind-me 69) | |
1323 @end group | |
1324 (setq lcl (buffer-local-variables)) | |
1325 ;; @r{First, built-in variables local in all buffers:} | |
1326 @result{} ((mark-active . nil) | |
1327 (buffer-undo-list . nil) | |
1328 (mode-name . "Fundamental") | |
1329 @dots{} | |
1330 @group | |
1331 ;; @r{Next, non-built-in buffer-local variables.} | |
1332 ;; @r{This one is buffer-local and void:} | |
1333 foobar | |
1334 ;; @r{This one is buffer-local and nonvoid:} | |
1335 (bind-me . 69)) | |
1336 @end group | |
1337 @end example | |
1338 | |
1339 Note that storing new values into the @sc{cdr}s of cons cells in this | |
1340 list does @emph{not} change the buffer-local values of the variables. | |
1341 @end defun | |
1342 | |
1343 @deffn Command kill-local-variable variable | |
1344 This function deletes the buffer-local binding (if any) for | |
1345 @var{variable} (a symbol) in the current buffer. As a result, the | |
1346 default binding of @var{variable} becomes visible in this buffer. This | |
1347 typically results in a change in the value of @var{variable}, since the | |
1348 default value is usually different from the buffer-local value just | |
1349 eliminated. | |
1350 | |
1351 If you kill the buffer-local binding of a variable that automatically | |
1352 becomes buffer-local when set, this makes the default value visible in | |
1353 the current buffer. However, if you set the variable again, that will | |
1354 once again create a buffer-local binding for it. | |
1355 | |
1356 @code{kill-local-variable} returns @var{variable}. | |
1357 | |
1358 This function is a command because it is sometimes useful to kill one | |
1359 buffer-local variable interactively, just as it is useful to create | |
1360 buffer-local variables interactively. | |
1361 @end deffn | |
1362 | |
1363 @defun kill-all-local-variables | |
1364 This function eliminates all the buffer-local variable bindings of the | |
98734
f20cbcf45bb3
(Creating Buffer-Local): Add an xref to "Setting Hooks" for the effect
Eli Zaretskii <eliz@gnu.org>
parents:
98680
diff
changeset
|
1365 current buffer except for variables marked as ``permanent'' and local |
f20cbcf45bb3
(Creating Buffer-Local): Add an xref to "Setting Hooks" for the effect
Eli Zaretskii <eliz@gnu.org>
parents:
98680
diff
changeset
|
1366 hook functions that have a non-@code{nil} @code{permanent-local-hook} |
f20cbcf45bb3
(Creating Buffer-Local): Add an xref to "Setting Hooks" for the effect
Eli Zaretskii <eliz@gnu.org>
parents:
98680
diff
changeset
|
1367 property (@pxref{Setting Hooks}). As a result, the buffer will see |
f20cbcf45bb3
(Creating Buffer-Local): Add an xref to "Setting Hooks" for the effect
Eli Zaretskii <eliz@gnu.org>
parents:
98680
diff
changeset
|
1368 the default values of most variables. |
84109 | 1369 |
1370 This function also resets certain other information pertaining to the | |
1371 buffer: it sets the local keymap to @code{nil}, the syntax table to the | |
1372 value of @code{(standard-syntax-table)}, the case table to | |
1373 @code{(standard-case-table)}, and the abbrev table to the value of | |
1374 @code{fundamental-mode-abbrev-table}. | |
1375 | |
1376 The very first thing this function does is run the normal hook | |
1377 @code{change-major-mode-hook} (see below). | |
1378 | |
1379 Every major mode command begins by calling this function, which has the | |
1380 effect of switching to Fundamental mode and erasing most of the effects | |
1381 of the previous major mode. To ensure that this does its job, the | |
1382 variables that major modes set should not be marked permanent. | |
1383 | |
1384 @code{kill-all-local-variables} returns @code{nil}. | |
1385 @end defun | |
1386 | |
1387 @defvar change-major-mode-hook | |
1388 The function @code{kill-all-local-variables} runs this normal hook | |
1389 before it does anything else. This gives major modes a way to arrange | |
1390 for something special to be done if the user switches to a different | |
1391 major mode. It is also useful for buffer-specific minor modes | |
1392 that should be forgotten if the user changes the major mode. | |
1393 | |
1394 For best results, make this variable buffer-local, so that it will | |
1395 disappear after doing its job and will not interfere with the | |
1396 subsequent major mode. @xref{Hooks}. | |
1397 @end defvar | |
1398 | |
1399 @c Emacs 19 feature | |
1400 @cindex permanent local variable | |
1401 A buffer-local variable is @dfn{permanent} if the variable name (a | |
1402 symbol) has a @code{permanent-local} property that is non-@code{nil}. | |
1403 Permanent locals are appropriate for data pertaining to where the file | |
1404 came from or how to save it, rather than with how to edit the contents. | |
1405 | |
1406 @node Default Value | |
1407 @subsection The Default Value of a Buffer-Local Variable | |
1408 @cindex default value | |
1409 | |
1410 The global value of a variable with buffer-local bindings is also | |
1411 called the @dfn{default} value, because it is the value that is in | |
1412 effect whenever neither the current buffer nor the selected frame has | |
1413 its own binding for the variable. | |
1414 | |
1415 The functions @code{default-value} and @code{setq-default} access and | |
1416 change a variable's default value regardless of whether the current | |
1417 buffer has a buffer-local binding. For example, you could use | |
1418 @code{setq-default} to change the default setting of | |
1419 @code{paragraph-start} for most buffers; and this would work even when | |
1420 you are in a C or Lisp mode buffer that has a buffer-local value for | |
1421 this variable. | |
1422 | |
1423 @c Emacs 19 feature | |
1424 The special forms @code{defvar} and @code{defconst} also set the | |
1425 default value (if they set the variable at all), rather than any | |
85688 | 1426 buffer-local value. |
84109 | 1427 |
1428 @defun default-value symbol | |
1429 This function returns @var{symbol}'s default value. This is the value | |
1430 that is seen in buffers and frames that do not have their own values for | |
1431 this variable. If @var{symbol} is not buffer-local, this is equivalent | |
1432 to @code{symbol-value} (@pxref{Accessing Variables}). | |
1433 @end defun | |
1434 | |
1435 @c Emacs 19 feature | |
1436 @defun default-boundp symbol | |
1437 The function @code{default-boundp} tells you whether @var{symbol}'s | |
1438 default value is nonvoid. If @code{(default-boundp 'foo)} returns | |
1439 @code{nil}, then @code{(default-value 'foo)} would get an error. | |
1440 | |
1441 @code{default-boundp} is to @code{default-value} as @code{boundp} is to | |
1442 @code{symbol-value}. | |
1443 @end defun | |
1444 | |
1445 @defspec setq-default [symbol form]@dots{} | |
1446 This special form gives each @var{symbol} a new default value, which is | |
1447 the result of evaluating the corresponding @var{form}. It does not | |
1448 evaluate @var{symbol}, but does evaluate @var{form}. The value of the | |
1449 @code{setq-default} form is the value of the last @var{form}. | |
1450 | |
1451 If a @var{symbol} is not buffer-local for the current buffer, and is not | |
1452 marked automatically buffer-local, @code{setq-default} has the same | |
1453 effect as @code{setq}. If @var{symbol} is buffer-local for the current | |
1454 buffer, then this changes the value that other buffers will see (as long | |
1455 as they don't have a buffer-local value), but not the value that the | |
1456 current buffer sees. | |
1457 | |
1458 @example | |
1459 @group | |
1460 ;; @r{In buffer @samp{foo}:} | |
1461 (make-local-variable 'buffer-local) | |
1462 @result{} buffer-local | |
1463 @end group | |
1464 @group | |
1465 (setq buffer-local 'value-in-foo) | |
1466 @result{} value-in-foo | |
1467 @end group | |
1468 @group | |
1469 (setq-default buffer-local 'new-default) | |
1470 @result{} new-default | |
1471 @end group | |
1472 @group | |
1473 buffer-local | |
1474 @result{} value-in-foo | |
1475 @end group | |
1476 @group | |
1477 (default-value 'buffer-local) | |
1478 @result{} new-default | |
1479 @end group | |
1480 | |
1481 @group | |
1482 ;; @r{In (the new) buffer @samp{bar}:} | |
1483 buffer-local | |
1484 @result{} new-default | |
1485 @end group | |
1486 @group | |
1487 (default-value 'buffer-local) | |
1488 @result{} new-default | |
1489 @end group | |
1490 @group | |
1491 (setq buffer-local 'another-default) | |
1492 @result{} another-default | |
1493 @end group | |
1494 @group | |
1495 (default-value 'buffer-local) | |
1496 @result{} another-default | |
1497 @end group | |
1498 | |
1499 @group | |
1500 ;; @r{Back in buffer @samp{foo}:} | |
1501 buffer-local | |
1502 @result{} value-in-foo | |
1503 (default-value 'buffer-local) | |
1504 @result{} another-default | |
1505 @end group | |
1506 @end example | |
1507 @end defspec | |
1508 | |
1509 @defun set-default symbol value | |
1510 This function is like @code{setq-default}, except that @var{symbol} is | |
1511 an ordinary evaluated argument. | |
1512 | |
1513 @example | |
1514 @group | |
1515 (set-default (car '(a b c)) 23) | |
1516 @result{} 23 | |
1517 @end group | |
1518 @group | |
1519 (default-value 'a) | |
1520 @result{} 23 | |
1521 @end group | |
1522 @end example | |
1523 @end defun | |
1524 | |
1525 @node File Local Variables | |
1526 @section File Local Variables | |
1527 @cindex file local variables | |
1528 | |
1529 A file can specify local variable values; Emacs uses these to create | |
1530 buffer-local bindings for those variables in the buffer visiting that | |
1531 file. @xref{File variables, , Local Variables in Files, emacs, The | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1532 GNU Emacs Manual}, for basic information about file-local variables. |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1533 This section describes the functions and variables that affect how |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1534 file-local variables are processed. |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1535 |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1536 If a file-local variable could specify an arbitrary function or Lisp |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1537 expression that would be called later, visiting a file could take over |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1538 your Emacs. Emacs protects against this by automatically setting only |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1539 those file-local variables whose specified values are known to be |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1540 safe. Other file-local variables are set only if the user agrees. |
84109 | 1541 |
1542 @defopt enable-local-variables | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1543 This variable controls whether to process file-local variables. |
84109 | 1544 The possible values are: |
1545 | |
1546 @table @asis | |
1547 @item @code{t} (the default) | |
1548 Set the safe variables, and query (once) about any unsafe variables. | |
1549 @item @code{:safe} | |
1550 Set only the safe variables and do not query. | |
1551 @item @code{:all} | |
1552 Set all the variables and do not query. | |
1553 @item @code{nil} | |
1554 Don't set any variables. | |
1555 @item anything else | |
1556 Query (once) about all the variables. | |
1557 @end table | |
1558 @end defopt | |
1559 | |
1560 @defun hack-local-variables &optional mode-only | |
1561 This function parses, and binds or evaluates as appropriate, any local | |
1562 variables specified by the contents of the current buffer. The variable | |
1563 @code{enable-local-variables} has its effect here. However, this | |
1564 function does not look for the @samp{mode:} local variable in the | |
1565 @w{@samp{-*-}} line. @code{set-auto-mode} does that, also taking | |
1566 @code{enable-local-variables} into account (@pxref{Auto Major Mode}). | |
1567 | |
98881
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1568 This function works by walking the alist stored in |
98896
b04b1b0d5866
(File Local Variables): Fix last change.
Eli Zaretskii <eliz@gnu.org>
parents:
98881
diff
changeset
|
1569 @code{file-local-variables-alist} and applying each local variable in |
98881
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1570 turn. It calls @code{before-hack-local-variables-hook} and |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1571 @code{hack-local-variables-hook} before and after applying the |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1572 variables, respectively. |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1573 |
84109 | 1574 If the optional argument @var{mode-only} is non-@code{nil}, then all |
1575 this function does is return @code{t} if the @w{@samp{-*-}} line or | |
1576 the local variables list specifies a mode and @code{nil} otherwise. | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1577 It does not set the mode nor any other file-local variable. |
84109 | 1578 @end defun |
1579 | |
98881
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1580 @defvar file-local-variables-alist |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1581 This buffer-local variable holds the alist of file-local variable |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1582 settings. Each element of the alist is of the form |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1583 @w{@code{(@var{var} . @var{value})}}, where @var{var} is a symbol of |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1584 the local variable and @var{value} is its value. When Emacs visits a |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1585 file, it first collects all the file-local variables into this alist, |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1586 and then the @code{hack-local-variables} function applies them one by |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1587 one. |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1588 @end defvar |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1589 |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1590 @defvar before-hack-local-variables-hook |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1591 Emacs calls this hook immediately before applying file-local variables |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1592 stored in @code{file-local-variables-alist}. |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1593 @end defvar |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1594 |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1595 @defvar hack-local-variables-hook |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1596 Emacs calls this hook immediately after it finishes applying |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1597 file-local variables stored in @code{file-local-variables-alist}. |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1598 @end defvar |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1599 |
84109 | 1600 @cindex safe local variable |
1601 You can specify safe values for a variable with a | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1602 @code{safe-local-variable} property. The property has to be a |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1603 function of one argument; any value is safe if the function returns |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1604 non-@code{nil} given that value. Many commonly-encountered file |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1605 variables have @code{safe-local-variable} properties; these include |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1606 @code{fill-column}, @code{fill-prefix}, and @code{indent-tabs-mode}. |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1607 For boolean-valued variables that are safe, use @code{booleanp} as the |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1608 property value. Lambda expressions should be quoted so that |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1609 @code{describe-variable} can display the predicate. |
84109 | 1610 |
1611 @defopt safe-local-variable-values | |
1612 This variable provides another way to mark some variable values as | |
1613 safe. It is a list of cons cells @code{(@var{var} . @var{val})}, | |
1614 where @var{var} is a variable name and @var{val} is a value which is | |
1615 safe for that variable. | |
1616 | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1617 When Emacs asks the user whether or not to obey a set of file-local |
84109 | 1618 variable specifications, the user can choose to mark them as safe. |
1619 Doing so adds those variable/value pairs to | |
1620 @code{safe-local-variable-values}, and saves it to the user's custom | |
1621 file. | |
1622 @end defopt | |
1623 | |
1624 @defun safe-local-variable-p sym val | |
1625 This function returns non-@code{nil} if it is safe to give @var{sym} | |
1626 the value @var{val}, based on the above criteria. | |
1627 @end defun | |
1628 | |
1629 @c @cindex risky local variable Duplicates risky-local-variable | |
1630 Some variables are considered @dfn{risky}. A variable whose name | |
1631 ends in any of @samp{-command}, @samp{-frame-alist}, @samp{-function}, | |
1632 @samp{-functions}, @samp{-hook}, @samp{-hooks}, @samp{-form}, | |
1633 @samp{-forms}, @samp{-map}, @samp{-map-alist}, @samp{-mode-alist}, | |
1634 @samp{-program}, or @samp{-predicate} is considered risky. The | |
1635 variables @samp{font-lock-keywords}, @samp{font-lock-keywords} | |
1636 followed by a digit, and @samp{font-lock-syntactic-keywords} are also | |
1637 considered risky. Finally, any variable whose name has a | |
1638 non-@code{nil} @code{risky-local-variable} property is considered | |
1639 risky. | |
1640 | |
1641 @defun risky-local-variable-p sym | |
1642 This function returns non-@code{nil} if @var{sym} is a risky variable, | |
1643 based on the above criteria. | |
1644 @end defun | |
1645 | |
1646 If a variable is risky, it will not be entered automatically into | |
1647 @code{safe-local-variable-values} as described above. Therefore, | |
1648 Emacs will always query before setting a risky variable, unless the | |
1649 user explicitly allows the setting by customizing | |
1650 @code{safe-local-variable-values} directly. | |
1651 | |
1652 @defvar ignored-local-variables | |
1653 This variable holds a list of variables that should not be given local | |
1654 values by files. Any value specified for one of these variables is | |
1655 completely ignored. | |
1656 @end defvar | |
1657 | |
1658 The @samp{Eval:} ``variable'' is also a potential loophole, so Emacs | |
1659 normally asks for confirmation before handling it. | |
1660 | |
1661 @defopt enable-local-eval | |
1662 This variable controls processing of @samp{Eval:} in @samp{-*-} lines | |
1663 or local variables | |
1664 lists in files being visited. A value of @code{t} means process them | |
1665 unconditionally; @code{nil} means ignore them; anything else means ask | |
1666 the user what to do for each file. The default value is @code{maybe}. | |
1667 @end defopt | |
1668 | |
1669 @defopt safe-local-eval-forms | |
1670 This variable holds a list of expressions that are safe to | |
1671 evaluate when found in the @samp{Eval:} ``variable'' in a file | |
1672 local variables list. | |
1673 @end defopt | |
1674 | |
1675 If the expression is a function call and the function has a | |
1676 @code{safe-local-eval-function} property, the property value | |
1677 determines whether the expression is safe to evaluate. The property | |
1678 value can be a predicate to call to test the expression, a list of | |
1679 such predicates (it's safe if any predicate succeeds), or @code{t} | |
1680 (always safe provided the arguments are constant). | |
1681 | |
1682 Text properties are also potential loopholes, since their values | |
1683 could include functions to call. So Emacs discards all text | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1684 properties from string values specified for file-local variables. |
84109 | 1685 |
100710
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1686 @node Directory Local Variables |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1687 @section Directory Local Variables |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1688 @cindex directory local variables |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1689 |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1690 A directory can specify local variable values common to all files in |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1691 that directory; Emacs uses these to create buffer-local bindings for |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1692 those variables in buffers visiting any file in that directory. This |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1693 is useful when the files in the directory belong to some @dfn{project} |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1694 and therefore share the same local variables. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1695 |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1696 There are two different methods for specifying directory local |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1697 variables: by putting them in a special file, or by defining a |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1698 @dfn{project class} for that directory. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1699 |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1700 @defvr Constant dir-locals-file |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1701 This constant is the name of the file where Emacs expects to find the |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1702 directory-local variables. The name of the file is |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1703 @file{.dir-locals.el}@footnote{ |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1704 The MS-DOS version of Emacs uses @file{_dir-locals.el} instead, due to |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1705 limitations of the DOS filesystems. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1706 }. A file by that name in a directory causes Emacs to apply its |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1707 settings to any file in that directory or any of its subdirectories. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1708 If some of the subdirectories have their own @file{.dir-locals.el} |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1709 files, Emacs uses the settings from the deepest file it finds starting |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1710 from the file's directory and moving up the directory tree. The file |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1711 specifies local variables as a specially formatted list; see |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1712 @ref{Directory Variables, , Per-directory Local Variables, emacs, The |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1713 GNU Emacs Manual}, for more details. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1714 @end defvr |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1715 |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1716 @defun hack-dir-local-variables |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1717 This function reads the @code{.dir-locals.el} file and stores the |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1718 directory-local variables in @code{file-local-variables-alist} that is |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1719 local to the buffer visiting any file in the directory, without |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1720 applying them. It also stores the directory-local settings in |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1721 @code{dir-locals-class-alist}, where it defines a special class for |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1722 the directory in which @file{.dir-locals.el} file was found. This |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1723 function works by calling @code{dir-locals-set-class-variables} and |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1724 @code{dir-locals-set-directory-class}, described below. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1725 @end defun |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1726 |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1727 @defun dir-locals-set-class-variables class variables |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1728 This function defines a set of variable settings for the named |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1729 @var{class}, which is a symbol. You can later assign the class to one |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1730 or more directories, and Emacs will apply those variable settings to |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1731 all files in those directories. The list in @var{variables} can be of |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1732 one of the two forms: @code{(@var{major-mode} . @var{alist})} or |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1733 @code{(@var{directory} . @var{list})}. With the first form, if the |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1734 file's buffer turns on a mode that is derived from @var{major-mode}, |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1735 then the all the variables in the associated @var{alist} are applied; |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1736 @var{alist} should be of the form @code{(@var{name} . @var{value})}. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1737 A special value @code{nil} for @var{major-mode} means the settings are |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1738 applicable to any mode. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1739 |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1740 With the second form of @var{variables}, if @var{directory} is the |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1741 initial substring of the file's directory, then @var{list} is applied |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1742 recursively by following the above rules; @var{list} should be of one |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1743 of the two forms accepted by this function in @var{variables}. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1744 @end defun |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1745 |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1746 @defun dir-locals-set-directory-class directory class |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1747 This function assigns @var{class} to all the files in @code{directory} |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1748 and its subdirectories. Thereafter, all the variable settings |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1749 specified for @var{class} will be applied to any visited file in |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1750 @var{directory} and its children. @var{class} must have been already |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1751 defined by @code{dir-locals-set-class-variables} |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1752 @end defun |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1753 |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1754 @defvar dir-locals-class-alist |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1755 This alist holds the class symbols and the associated variable |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1756 settings. It is updated by @code{dir-locals-set-class-variables}. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1757 @end defvar |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1758 |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1759 @defvar dir-locals-directory-alist |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1760 This alist holds directory names and their assigned class names. It |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1761 is updated by @code{dir-locals-set-directory-class}. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1762 @end defvar |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1763 |
98680
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1764 @node Frame-Local Variables |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1765 @section Frame-Local Values for Variables |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1766 @cindex frame-local variables |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1767 |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1768 In addition to buffer-local variable bindings (@pxref{Buffer-Local |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1769 Variables}), Emacs supports @dfn{frame-local} bindings. A frame-local |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1770 binding for a variable is in effect in a frame for which it was |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1771 defined. |
98680
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1772 |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1773 In practice, frame-local variables have not proven very useful. |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1774 Ordinary frame parameters are generally used instead (@pxref{Frame |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1775 Parameters}). The function @code{make-variable-frame-local}, which |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1776 was used to define frame-local variables, has been deprecated since |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1777 Emacs 22.2. However, you can still define a frame-specific binding |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1778 for a variable @var{var} in frame @var{frame}, by setting the |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1779 @var{var} frame parameter for that frame: |
98680
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1780 |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1781 @lisp |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1782 (modify-frame-parameters @var{frame} '((@var{var} . @var{value}))) |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1783 @end lisp |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1784 |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1785 @noindent |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1786 This causes the variable @var{var} to be bound to the specified |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1787 @var{value} in the named @var{frame}. To check the frame-specific |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1788 values of such variables, use @code{frame-parameter}. @xref{Parameter |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1789 Access}. |
100710
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1790 |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1791 Note that you cannot have a frame-local binding for a variable that |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1792 has a buffer-local binding. |
100710
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1793 |
84109 | 1794 @node Variable Aliases |
1795 @section Variable Aliases | |
1796 @cindex variable aliases | |
1797 | |
1798 It is sometimes useful to make two variables synonyms, so that both | |
1799 variables always have the same value, and changing either one also | |
1800 changes the other. Whenever you change the name of a | |
1801 variable---either because you realize its old name was not well | |
1802 chosen, or because its meaning has partly changed---it can be useful | |
1803 to keep the old name as an @emph{alias} of the new one for | |
1804 compatibility. You can do this with @code{defvaralias}. | |
1805 | |
1806 @defun defvaralias new-alias base-variable &optional docstring | |
1807 This function defines the symbol @var{new-alias} as a variable alias | |
1808 for symbol @var{base-variable}. This means that retrieving the value | |
1809 of @var{new-alias} returns the value of @var{base-variable}, and | |
1810 changing the value of @var{new-alias} changes the value of | |
1811 @var{base-variable}. The two aliased variable names always share the | |
1812 same value and the same bindings. | |
1813 | |
1814 If the @var{docstring} argument is non-@code{nil}, it specifies the | |
1815 documentation for @var{new-alias}; otherwise, the alias gets the same | |
1816 documentation as @var{base-variable} has, if any, unless | |
1817 @var{base-variable} is itself an alias, in which case @var{new-alias} gets | |
1818 the documentation of the variable at the end of the chain of aliases. | |
1819 | |
1820 This function returns @var{base-variable}. | |
1821 @end defun | |
1822 | |
1823 Variable aliases are convenient for replacing an old name for a | |
1824 variable with a new name. @code{make-obsolete-variable} declares that | |
1825 the old name is obsolete and therefore that it may be removed at some | |
1826 stage in the future. | |
1827 | |
1828 @defun make-obsolete-variable obsolete-name current-name &optional when | |
86434
1aadc9bdea81
(Variable Aliases): Minor cleanup.
Richard M. Stallman <rms@gnu.org>
parents:
85688
diff
changeset
|
1829 This function makes the byte compiler warn that the variable |
84109 | 1830 @var{obsolete-name} is obsolete. If @var{current-name} is a symbol, it is |
1831 the variable's new name; then the warning message says to use | |
1832 @var{current-name} instead of @var{obsolete-name}. If @var{current-name} | |
1833 is a string, this is the message and there is no replacement variable. | |
1834 | |
1835 If provided, @var{when} should be a string indicating when the | |
1836 variable was first made obsolete---for example, a date or a release | |
1837 number. | |
1838 @end defun | |
1839 | |
1840 You can make two variables synonyms and declare one obsolete at the | |
1841 same time using the macro @code{define-obsolete-variable-alias}. | |
1842 | |
1843 @defmac define-obsolete-variable-alias obsolete-name current-name &optional when docstring | |
1844 This macro marks the variable @var{obsolete-name} as obsolete and also | |
1845 makes it an alias for the variable @var{current-name}. It is | |
1846 equivalent to the following: | |
1847 | |
1848 @example | |
1849 (defvaralias @var{obsolete-name} @var{current-name} @var{docstring}) | |
1850 (make-obsolete-variable @var{obsolete-name} @var{current-name} @var{when}) | |
1851 @end example | |
1852 @end defmac | |
1853 | |
1854 @defun indirect-variable variable | |
1855 This function returns the variable at the end of the chain of aliases | |
1856 of @var{variable}. If @var{variable} is not a symbol, or if @var{variable} is | |
1857 not defined as an alias, the function returns @var{variable}. | |
1858 | |
1859 This function signals a @code{cyclic-variable-indirection} error if | |
1860 there is a loop in the chain of symbols. | |
1861 @end defun | |
1862 | |
1863 @example | |
1864 (defvaralias 'foo 'bar) | |
1865 (indirect-variable 'foo) | |
1866 @result{} bar | |
1867 (indirect-variable 'bar) | |
1868 @result{} bar | |
1869 (setq bar 2) | |
1870 bar | |
1871 @result{} 2 | |
1872 @group | |
1873 foo | |
1874 @result{} 2 | |
1875 @end group | |
1876 (setq foo 0) | |
1877 bar | |
1878 @result{} 0 | |
1879 foo | |
1880 @result{} 0 | |
1881 @end example | |
1882 | |
1883 @node Variables with Restricted Values | |
1884 @section Variables with Restricted Values | |
1885 | |
1886 Ordinary Lisp variables can be assigned any value that is a valid | |
1887 Lisp object. However, certain Lisp variables are not defined in Lisp, | |
1888 but in C. Most of these variables are defined in the C code using | |
1889 @code{DEFVAR_LISP}. Like variables defined in Lisp, these can take on | |
1890 any value. However, some variables are defined using | |
1891 @code{DEFVAR_INT} or @code{DEFVAR_BOOL}. @xref{Defining Lisp | |
1892 variables in C,, Writing Emacs Primitives}, in particular the | |
1893 description of functions of the type @code{syms_of_@var{filename}}, | |
1894 for a brief discussion of the C implementation. | |
1895 | |
1896 Variables of type @code{DEFVAR_BOOL} can only take on the values | |
1897 @code{nil} or @code{t}. Attempting to assign them any other value | |
1898 will set them to @code{t}: | |
1899 | |
1900 @example | |
1901 (let ((display-hourglass 5)) | |
1902 display-hourglass) | |
1903 @result{} t | |
1904 @end example | |
1905 | |
1906 @defvar byte-boolean-vars | |
1907 This variable holds a list of all variables of type @code{DEFVAR_BOOL}. | |
1908 @end defvar | |
1909 | |
1910 Variables of type @code{DEFVAR_INT} can only take on integer values. | |
1911 Attempting to assign them any other value will result in an error: | |
1912 | |
1913 @example | |
1914 (setq window-min-height 5.0) | |
1915 @error{} Wrong type argument: integerp, 5.0 | |
1916 @end example | |
1917 | |
1918 @ignore | |
1919 arch-tag: 5ff62c44-2b51-47bb-99d4-fea5aeec5d3e | |
1920 @end ignore |