annotate install-sh @ 83420:521d3f18b3d1

Reimplement terminal parameters in C; clean up term.c, create terminal.c. * lisp/termdev.el (terminal-parameter-alist, terminal-parameters, terminal-parameter-p) (terminal-parameter, set-terminal-parameter, terminal-handle-delete-frame): Remove. * src/term.c (Vring_bell_function, device_list, initial_device) (next_device_id, ring_bell, update_begin, update_end) (set_terminal_window, cursor_to, raw_cursor_to) (clear_to_end, clear_frame, clear_end_of_line) (write_glyphs, insert_glyphs, delete_glyphs, ins_del_lines) (get_device, Fdisplay_name, create_device, delete_device) (Fdelete_display, Fdisplay_live_p, Fdisplay_list) Move to terminal.c. (syms_of_term): Move their initialization to terminal.c. * src/terminal.c: New file. (device_list, next_device_id, initial_device, Vring_bell_function) (ring_bell, update_begin, update_end, set_terminal_window) (cursor_to, raw_cursor_to, clear_to_end, clear_frame) (clear_end_of_line, write_glyphs, insert_glyphs, delete_glyphs) (ins_del_lines, get_device, create_device, delete_device) (Fdelete_display, Fdisplay_live_p, Fdisplay_list, Fdisplay_name): Move here. (mark_devices, get_terminal_param, store_terminal_param) (Fterminal_parameters, Fterminal_parameter) (Fmodify_terminal_parameters, Fset_terminal_parameter) (init_initial_device, delete_initial_device) (syms_of_terminal): New functions. * lisp/simple.el (normal-erase-is-backspace-setup-frame) (normal-erase-is-backspace-mode): Rephrase things without terminal-parameter-p. * lisp/termdev.el (terminal-getenv, terminal-setenv) (with-terminal-environment): Ditto. * mac/makefile.MPW (EmacsObjects): Add terminal.c.x. ({Src}terminal.c.x): Add dependencies. * src/Makefile.in (obj): Add terminal.o. (terminal.o): Add dependencies. [HAVE_CARBON]: Make terminal.o depend on macgui.h. * src/alloc.c (mark_devices): Declare. (Fgarbage_collect): Call `mark_devices'. * src/dispextern.h (set_scroll_region, turn_off_insert) (turn_off_highlight, background_highlight, clear_end_of_line_raw) (tty_clear_end_of_line, tty_setup_colors, delete_tty): Remove. (raw_cursor_to, clear_to_end, tty_turn_off_insert) (tty_turn_off_highlight): Add declaration. * src/emacs.c (main): Call `syms_of_terminal'. * src/frame.c (get_future_frame_param): New function. (Fmake_terminal_frame): Use it. * src/keyboard.c (pop_kboard): Remove unused variable. (Fset_output_flow_control): Return nil. * src/keymap.h (Fset_keymap_parent): Add EXFUN. * src/lisp.h (syms_of_terminal): Declare it. * src/sysdep.c (reset_sys_modes): Update for renames. * src/term.c (set_scroll_region): Rename to `tty_set_scroll_region'. (turn_on_insert): Rename to `tty_turn_on_insert'. (turn_off_insert): Rename to `tty_turn_off_insert'. (turn_off_highlight): Rename to `tty_turn_off_highlight'. (turn_on_highlight): Rename to `tty_turn_on_highlight'. (toggle_highligh): Rename to `tty_toggle_highlight'. (background_highlight): Rename to `tty_background_highlight'. (highlight_if_desired): Rename to `tty_highlight_if_desired'. (tty_ring_bell, tty_update_end, tty_set_terminal_window) (tty_set_scroll_region, tty_background_highlight) (tty_cursor_to, tty_raw_cursor_to, tty_clear_to_end) (tty_clear_frame, tty_clear_end_of_line, tty_write_glyphs) (tty_insert_glyphs, tty_delete_glyphs, tty_ins_del_lines) (term_get_fkeys, tty_setup_colors, dissociate_if_controlling_tty) (delete_tty): Add static modifier. (tty_reset_terminal_modes, tty_set_terminal_window) (tty_set_scroll_region, tty_background_highlight) (tty_highlight_if_desired, tty_cursor_to) (tty_raw_cursor_to, tty_clear_to_end, tty_clear_frame) (tty_clear_end_of_line, tty_write_glyphs, tty_insert_glyphs) (tty_delete_glyphs, tty_ins_del_lines, turn_on_face): Update for renames. * src/termhooks.h (param_alist): New member to struct device. * src/xterm.h (x_delete_device): Declare. git-archimport-id: [e-mail]--2004/emacs--multi-tty--0--patch-460

#! /bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission.  M.I.T. makes no representations about the
# suitability of this software for any purpose.  It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.  It can only install one file at a time, a restriction
# shared with many OS's install programs.


# set DOITPROG to echo to test this script

# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"


# put in absolute paths if you don't have them in your path; or use env. vars.

mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"

transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""

while [ x"$1" != x ]; do
    case $1 in
	-c) instcmd="$cpprog"
	    shift
	    continue;;

	-d) dir_arg=true
	    shift
	    continue;;

	-m) chmodcmd="$chmodprog $2"
	    shift
	    shift
	    continue;;

	-o) chowncmd="$chownprog $2"
	    shift
	    shift
	    continue;;

	-g) chgrpcmd="$chgrpprog $2"
	    shift
	    shift
	    continue;;

	-s) stripcmd="$stripprog"
	    shift
	    continue;;

	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
	    shift
	    continue;;

	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
	    shift
	    continue;;

	*)  if [ x"$src" = x ]
	    then
		src=$1
	    else
		# this colon is to work around a 386BSD /bin/sh bug
		:
		dst=$1
	    fi
	    shift
	    continue;;
    esac
done

if [ x"$src" = x ]
then
	echo "install:	no input file specified"
	exit 1
else
	true
fi

if [ x"$dir_arg" != x ]; then
	dst=$src
	src=""

	if [ -d $dst ]; then
		instcmd=:
	else
		instcmd=mkdir
	fi
else

# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.

	if [ -f $src -o -d $src ]
	then
		true
	else
		echo "install:  $src does not exist"
		exit 1
	fi

	if [ x"$dst" = x ]
	then
		echo "install:	no destination specified"
		exit 1
	else
		true
	fi

# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic

	if [ -d $dst ]
	then
		dst="$dst"/`basename $src`
	else
		true
	fi
fi

## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`

# Make sure that the destination directory exists.
#  this part is taken from Noah Friedman's mkinstalldirs script

# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-${defaultIFS}}"

oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"

pathcomp=''

while [ $# -ne 0 ] ; do
	pathcomp="${pathcomp}${1}"
	shift

	if [ ! -d "${pathcomp}" ] ;
        then
		$mkdirprog "${pathcomp}"
	else
		true
	fi

	pathcomp="${pathcomp}/"
done
fi

if [ x"$dir_arg" != x ]
then
	$doit $instcmd $dst &&

	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else

# If we're going to rename the final executable, determine the name now.

	if [ x"$transformarg" = x ]
	then
		dstfile=`basename $dst`
	else
		dstfile=`basename $dst $transformbasename |
			sed $transformarg`$transformbasename
	fi

# don't allow the sed command to completely eliminate the filename

	if [ x"$dstfile" = x ]
	then
		dstfile=`basename $dst`
	else
		true
	fi

# Make a temp file name in the proper directory.

	dsttmp=$dstdir/#inst.$$#

# Move or copy the file name to the temp name

	$doit $instcmd $src $dsttmp &&

	trap "rm -f ${dsttmp}" 0 &&

# and set any options; do chmod last to preserve setuid bits

# If any of these fail, we abort the whole thing.  If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.

	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&

# Now rename the file to the real destination.

	$doit $rmcmd -f $dstdir/$dstfile &&
	$doit $mvcmd $dsttmp $dstdir/$dstfile

fi &&


exit 0