Mercurial > emacs
annotate lispref/loading.texi @ 10561:53f34c870201
(init_buffer_once, syms_of_buffer):
Set up buffer-local var point_before_scroll.
(reset_buffer): Init point_before_scroll.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Fri, 27 Jan 1995 07:17:39 +0000 |
parents | e4423ed2b4cb |
children | a0efedb217ed |
rev | line source |
---|---|
6453 | 1 @c -*-texinfo-*- |
2 @c This is part of the GNU Emacs Lisp Reference Manual. | |
3 @c Copyright (C) 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc. | |
4 @c See the file elisp.texi for copying conditions. | |
5 @setfilename ../info/loading | |
6 @node Loading, Byte Compilation, Macros, Top | |
7 @chapter Loading | |
8 @cindex loading | |
9 @cindex library | |
10 @cindex Lisp library | |
11 | |
12 Loading a file of Lisp code means bringing its contents into the Lisp | |
13 environment in the form of Lisp objects. Emacs finds and opens the | |
14 file, reads the text, evaluates each form, and then closes the file. | |
15 | |
16 The load functions evaluate all the expressions in a file just | |
17 as the @code{eval-current-buffer} function evaluates all the | |
18 expressions in a buffer. The difference is that the load functions | |
19 read and evaluate the text in the file as found on disk, not the text | |
20 in an Emacs buffer. | |
21 | |
22 @cindex top-level form | |
23 The loaded file must contain Lisp expressions, either as source code | |
7212 | 24 or as byte-compiled code. Each form in the file is called a |
25 @dfn{top-level form}. There is no special format for the forms in a | |
6453 | 26 loadable file; any form in a file may equally well be typed directly |
27 into a buffer and evaluated there. (Indeed, most code is tested this | |
28 way.) Most often, the forms are function definitions and variable | |
29 definitions. | |
30 | |
31 A file containing Lisp code is often called a @dfn{library}. Thus, | |
32 the ``Rmail library'' is a file containing code for Rmail mode. | |
33 Similarly, a ``Lisp library directory'' is a directory of files | |
34 containing Lisp code. | |
35 | |
36 @menu | |
37 * How Programs Do Loading:: The @code{load} function and others. | |
38 * Autoload:: Setting up a function to autoload. | |
39 * Repeated Loading:: Precautions about loading a file twice. | |
40 * Features:: Loading a library if it isn't already loaded. | |
41 * Unloading:: How to ``unload'' a library that was loaded. | |
42 * Hooks for Loading:: Providing code to be run when | |
43 particular libraries are loaded. | |
44 @end menu | |
45 | |
46 @node How Programs Do Loading | |
47 @section How Programs Do Loading | |
48 | |
49 Emacs Lisp has several interfaces for loading. For example, | |
50 @code{autoload} creates a placeholder object for a function in a file; | |
51 trying to call the autoloading function loads the file to get the | |
52 function's real definition (@pxref{Autoload}). @code{require} loads a | |
53 file if it isn't already loaded (@pxref{Features}). Ultimately, all | |
54 these facilities call the @code{load} function to do the work. | |
55 | |
56 @defun load filename &optional missing-ok nomessage nosuffix | |
57 This function finds and opens a file of Lisp code, evaluates all the | |
58 forms in it, and closes the file. | |
59 | |
60 To find the file, @code{load} first looks for a file named | |
61 @file{@var{filename}.elc}, that is, for a file whose name is | |
62 @var{filename} with @samp{.elc} appended. If such a file exists, it is | |
63 loaded. If there is no file by that name, then @code{load} looks for a | |
7212 | 64 file named @file{@var{filename}.el}. If that file exists, it is loaded. |
6453 | 65 Finally, if neither of those names is found, @code{load} looks for a |
66 file named @var{filename} with nothing appended, and loads it if it | |
67 exists. (The @code{load} function is not clever about looking at | |
68 @var{filename}. In the perverse case of a file named @file{foo.el.el}, | |
69 evaluation of @code{(load "foo.el")} will indeed find it.) | |
70 | |
71 If the optional argument @var{nosuffix} is non-@code{nil}, then the | |
72 suffixes @samp{.elc} and @samp{.el} are not tried. In this case, you | |
73 must specify the precise file name you want. | |
74 | |
75 If @var{filename} is a relative file name, such as @file{foo} or | |
76 @file{baz/foo.bar}, @code{load} searches for the file using the variable | |
77 @code{load-path}. It appends @var{filename} to each of the directories | |
78 listed in @code{load-path}, and loads the first file it finds whose name | |
79 matches. The current default directory is tried only if it is specified | |
80 in @code{load-path}, where @code{nil} stands for the default directory. | |
81 @code{load} tries all three possible suffixes in the first directory in | |
82 @code{load-path}, then all three suffixes in the second directory, and | |
83 so on. | |
84 | |
85 If you get a warning that @file{foo.elc} is older than @file{foo.el}, it | |
86 means you should consider recompiling @file{foo.el}. @xref{Byte | |
87 Compilation}. | |
88 | |
89 Messages like @samp{Loading foo...} and @samp{Loading foo...done} appear | |
90 in the echo area during loading unless @var{nomessage} is | |
91 non-@code{nil}. | |
92 | |
93 @cindex load errors | |
94 Any unhandled errors while loading a file terminate loading. If the | |
7212 | 95 load was done for the sake of @code{autoload}, any function definitions |
96 made during the loading are undone. | |
6453 | 97 |
98 @kindex file-error | |
99 If @code{load} can't find the file to load, then normally it signals the | |
100 error @code{file-error} (with @samp{Cannot open load file | |
101 @var{filename}}). But if @var{missing-ok} is non-@code{nil}, then | |
102 @code{load} just returns @code{nil}. | |
103 | |
104 @code{load} returns @code{t} if the file loads successfully. | |
105 @end defun | |
106 | |
107 @ignore | |
108 @deffn Command load-file filename | |
109 This function loads the file @var{filename}. If @var{filename} is an | |
110 absolute file name, then it is loaded. If it is relative, then the | |
111 current default directory is assumed. @code{load-path} is not used, and | |
112 suffixes are not appended. Use this function if you wish to specify | |
113 the file to be loaded exactly. | |
114 @end deffn | |
115 | |
116 @deffn Command load-library library | |
117 This function loads the library named @var{library}. A library is | |
118 nothing more than a file that may be loaded as described earlier. This | |
119 function is identical to @code{load}, save that it reads a file name | |
120 interactively with completion. | |
121 @end deffn | |
122 @end ignore | |
123 | |
124 @defopt load-path | |
125 @cindex @code{EMACSLOADPATH} environment variable | |
126 The value of this variable is a list of directories to search when | |
127 loading files with @code{load}. Each element is a string (which must be | |
128 a directory name) or @code{nil} (which stands for the current working | |
129 directory). The value of @code{load-path} is initialized from the | |
130 environment variable @code{EMACSLOADPATH}, if that exists; otherwise its | |
131 default value is specified in @file{emacs/src/paths.h} when Emacs is | |
132 built. | |
133 | |
134 The syntax of @code{EMACSLOADPATH} is the same as used for @code{PATH}; | |
135 @samp{:} separates directory names, and @samp{.} is used for the current | |
136 default directory. Here is an example of how to set your | |
137 @code{EMACSLOADPATH} variable from a @code{csh} @file{.login} file: | |
138 | |
139 @c This overfull hbox is OK. --rjc 16mar92 | |
140 @smallexample | |
141 setenv EMACSLOADPATH .:/user/bil/emacs:/usr/lib/emacs/lisp | |
142 @end smallexample | |
143 | |
144 Here is how to set it using @code{sh}: | |
145 | |
146 @smallexample | |
147 export EMACSLOADPATH | |
148 EMACSLOADPATH=.:/user/bil/emacs:/usr/local/lib/emacs/lisp | |
149 @end smallexample | |
150 | |
151 Here is an example of code you can place in a @file{.emacs} file to add | |
152 several directories to the front of your default @code{load-path}: | |
153 | |
154 @smallexample | |
155 (setq load-path | |
156 (append (list nil "/user/bil/emacs" | |
157 "/usr/local/lisplib" | |
158 (expand-file-name "~/emacs")) | |
159 load-path)) | |
160 @end smallexample | |
161 | |
162 @c Wordy to rid us of an overfull hbox. --rjc 15mar92 | |
163 @noindent | |
164 In this example, the path searches the current working directory first, | |
165 followed then by the @file{/user/bil/emacs} directory and then by | |
166 the @file{/usr/local/lisplib} directory, | |
167 which are then followed by the standard directories for Lisp code. | |
168 | |
7212 | 169 The command line options @samp{-l} or @samp{-load} specify a Lisp |
170 library to load as part of Emacs startup. Since this file might be in | |
171 the current directory, Emacs 18 temporarily adds the current directory | |
172 to the front of @code{load-path} so the file can be found there. Newer | |
173 Emacs versions also find such files in the current directory, but | |
174 without altering @code{load-path}. | |
6453 | 175 @end defopt |
176 | |
177 @defvar load-in-progress | |
178 This variable is non-@code{nil} if Emacs is in the process of loading a | |
179 file, and it is @code{nil} otherwise. This is how @code{defun} and | |
180 @code{provide} determine whether a load is in progress, so that their | |
181 effect can be undone if the load fails. | |
182 @end defvar | |
183 | |
184 To learn how @code{load} is used to build Emacs, see @ref{Building Emacs}. | |
185 | |
186 @node Autoload | |
187 @section Autoload | |
188 @cindex autoload | |
189 | |
190 The @dfn{autoload} facility allows you to make a function or macro | |
191 available but put off loading its actual definition. The first call to | |
192 the function automatically reads the proper file to install the real | |
193 definition and other associated code, then runs the real definition | |
194 as if it had been loaded all along. | |
195 | |
196 There are two ways to set up an autoloaded function: by calling | |
197 @code{autoload}, and by writing a special ``magic'' comment in the | |
198 source before the real definition. @code{autoload} is the low-level | |
199 primitive for autoloading; any Lisp program can call @code{autoload} at | |
200 any time. Magic comments do nothing on their own; they serve as a guide | |
201 for the command @code{update-file-autoloads}, which constructs calls to | |
202 @code{autoload} and arranges to execute them when Emacs is built. Magic | |
203 comments are the most convenient way to make a function autoload, but | |
204 only for packages installed along with Emacs. | |
205 | |
7212 | 206 @defun autoload function filename &optional docstring interactive type |
207 This function defines the function (or macro) named @var{function} so as | |
6453 | 208 to load automatically from @var{filename}. The string @var{filename} |
209 specifies the file to load to get the real definition of @var{function}. | |
210 | |
211 The argument @var{docstring} is the documentation string for the | |
212 function. Normally, this is the identical to the documentation string | |
213 in the function definition itself. Specifying the documentation string | |
214 in the call to @code{autoload} makes it possible to look at the | |
215 documentation without loading the function's real definition. | |
216 | |
217 If @var{interactive} is non-@code{nil}, then the function can be called | |
218 interactively. This lets completion in @kbd{M-x} work without loading | |
219 the function's real definition. The complete interactive specification | |
220 need not be given here; it's not needed unless the user actually calls | |
221 @var{function}, and when that happens, it's time to load the real | |
222 definition. | |
223 | |
224 You can autoload macros and keymaps as well as ordinary functions. | |
225 Specify @var{type} as @code{macro} if @var{function} is really a macro. | |
226 Specify @var{type} as @code{keymap} if @var{function} is really a | |
227 keymap. Various parts of Emacs need to know this information without | |
228 loading the real definition. | |
229 | |
230 @cindex function cell in autoload | |
7212 | 231 If @var{function} already has a non-void function definition that is not |
6453 | 232 an autoload object, @code{autoload} does nothing and returns @code{nil}. |
7212 | 233 If the function cell of @var{function} is void, or is already an autoload |
6453 | 234 object, then it is defined as an autoload object like this: |
235 | |
236 @example | |
237 (autoload @var{filename} @var{docstring} @var{interactive} @var{type}) | |
238 @end example | |
239 | |
240 For example, | |
241 | |
242 @example | |
243 (symbol-function 'run-prolog) | |
244 @result{} (autoload "prolog" 169681 t nil) | |
245 @end example | |
246 | |
247 @noindent | |
248 In this case, @code{"prolog"} is the name of the file to load, 169681 | |
249 refers to the documentation string in the @file{emacs/etc/DOC} file | |
250 (@pxref{Documentation Basics}), @code{t} means the function is | |
251 interactive, and @code{nil} that it is not a macro or a keymap. | |
252 @end defun | |
253 | |
254 @cindex autoload errors | |
255 The autoloaded file usually contains other definitions and may require | |
256 or provide one or more features. If the file is not completely loaded | |
257 (due to an error in the evaluation of its contents), any function | |
258 definitions or @code{provide} calls that occurred during the load are | |
259 undone. This is to ensure that the next attempt to call any function | |
260 autoloading from this file will try again to load the file. If not for | |
261 this, then some of the functions in the file might appear defined, but | |
262 they might fail to work properly for the lack of certain subroutines | |
263 defined later in the file and not loaded successfully. | |
264 | |
265 If the autoloaded file fails to define the desired Lisp function or | |
266 macro, then an error is signaled with data @code{"Autoloading failed to | |
267 define function @var{function-name}"}. | |
268 | |
269 @findex update-file-autoloads | |
270 @findex update-directory-autoloads | |
271 A magic autoload comment looks like @samp{;;;###autoload}, on a line | |
272 by itself, just before the real definition of the function in its | |
273 autoloadable source file. The command @kbd{M-x update-file-autoloads} | |
274 writes a corresponding @code{autoload} call into @file{loaddefs.el}. | |
275 Building Emacs loads @file{loaddefs.el} and thus calls @code{autoload}. | |
276 @kbd{M-x update-directory-autoloads} is even more powerful; it updates | |
277 autoloads for all files in the current directory. | |
278 | |
279 The same magic comment can copy any kind of form into | |
280 @file{loaddefs.el}. If the form following the magic comment is not a | |
281 function definition, it is copied verbatim. You can also use a magic | |
7212 | 282 comment to execute a form at build time @emph{without} executing it when |
283 the file itself is loaded. To do this, write the form @dfn{on the same | |
284 line} as the magic comment. Since it is in a comment, it does nothing | |
285 when you load the source file; but @code{update-file-autoloads} copies | |
286 it to @file{loaddefs.el}, where it is executed while building Emacs. | |
6453 | 287 |
288 The following example shows how @code{doctor} is prepared for | |
289 autoloading with a magic comment: | |
290 | |
291 @smallexample | |
292 ;;;###autoload | |
293 (defun doctor () | |
294 "Switch to *doctor* buffer and start giving psychotherapy." | |
295 (interactive) | |
296 (switch-to-buffer "*doctor*") | |
297 (doctor-mode)) | |
298 @end smallexample | |
299 | |
300 @noindent | |
301 Here's what that produces in @file{loaddefs.el}: | |
302 | |
303 @smallexample | |
304 (autoload 'doctor "doctor" | |
305 "\ | |
306 Switch to *doctor* buffer and start giving psychotherapy." | |
307 t) | |
308 @end smallexample | |
309 | |
310 @noindent | |
311 The backslash and newline immediately following the double-quote are a | |
312 convention used only in the preloaded Lisp files such as | |
313 @file{loaddefs.el}; they tell @code{make-docfile} to put the | |
314 documentation string in the @file{etc/DOC} file. @xref{Building Emacs}. | |
315 | |
316 @node Repeated Loading | |
317 @comment node-name, next, previous, up | |
318 @section Repeated Loading | |
319 @cindex repeated loading | |
320 | |
321 You may load one file more than once in an Emacs session. For | |
322 example, after you have rewritten and reinstalled a function definition | |
323 by editing it in a buffer, you may wish to return to the original | |
324 version; you can do this by reloading the file it came from. | |
325 | |
326 When you load or reload files, bear in mind that the @code{load} and | |
327 @code{load-library} functions automatically load a byte-compiled file | |
328 rather than a non-compiled file of similar name. If you rewrite a file | |
329 that you intend to save and reinstall, remember to byte-compile it if | |
330 necessary; otherwise you may find yourself inadvertently reloading the | |
331 older, byte-compiled file instead of your newer, non-compiled file! | |
332 | |
333 When writing the forms in a Lisp library file, keep in mind that the | |
334 file might be loaded more than once. For example, the choice of | |
335 @code{defvar} vs.@: @code{defconst} for defining a variable depends on | |
336 whether it is desirable to reinitialize the variable if the library is | |
337 reloaded: @code{defconst} does so, and @code{defvar} does not. | |
338 (@xref{Defining Variables}.) | |
339 | |
340 The simplest way to add an element to an alist is like this: | |
341 | |
342 @example | |
343 (setq minor-mode-alist | |
344 (cons '(leif-mode " Leif") minor-mode-alist)) | |
345 @end example | |
346 | |
347 @noindent | |
348 But this would add multiple elements if the library is reloaded. | |
349 To avoid the problem, write this: | |
350 | |
351 @example | |
352 (or (assq 'leif-mode minor-mode-alist) | |
353 (setq minor-mode-alist | |
354 (cons '(leif-mode " Leif") minor-mode-alist))) | |
355 @end example | |
356 | |
357 Occasionally you will want to test explicitly whether a library has | |
358 already been loaded. Here's one way to test, in a library, whether it | |
359 has been loaded before: | |
360 | |
361 @example | |
362 (if (not (boundp 'foo-was-loaded)) | |
363 @var{execute-first-time-only}) | |
364 | |
365 (setq foo-was-loaded t) | |
366 @end example | |
367 | |
368 @noindent | |
369 If the library uses @code{provide} to provide a named feature, you can | |
370 use @code{featurep} to test whether the library has been loaded. | |
7212 | 371 @ifinfo |
6453 | 372 @xref{Features}. |
7212 | 373 @end ifinfo |
6453 | 374 |
375 @node Features | |
376 @section Features | |
377 @cindex features | |
378 @cindex requiring features | |
379 @cindex providing features | |
380 | |
381 @code{provide} and @code{require} are an alternative to | |
382 @code{autoload} for loading files automatically. They work in terms of | |
383 named @dfn{features}. Autoloading is triggered by calling a specific | |
384 function, but a feature is loaded the first time another program asks | |
385 for it by name. | |
386 | |
387 A feature name is a symbol that stands for a collection of functions, | |
388 variables, etc. The file that defines them should @dfn{provide} the | |
389 feature. Another program that uses them may ensure they are defined by | |
390 @dfn{requiring} the feature. This loads the file of definitions if it | |
391 hasn't been loaded already. | |
392 | |
393 To require the presence of a feature, call @code{require} with the | |
394 feature name as argument. @code{require} looks in the global variable | |
395 @code{features} to see whether the desired feature has been provided | |
396 already. If not, it loads the feature from the appropriate file. This | |
7212 | 397 file should call @code{provide} at the top level to add the feature to |
6453 | 398 @code{features}; if it fails to do so, @code{require} signals an error. |
399 @cindex load error with require | |
400 | |
401 Features are normally named after the files that provide them, so that | |
402 @code{require} need not be given the file name. | |
403 | |
404 For example, in @file{emacs/lisp/prolog.el}, | |
405 the definition for @code{run-prolog} includes the following code: | |
406 | |
407 @smallexample | |
408 (defun run-prolog () | |
409 "Run an inferior Prolog process, input and output via buffer *prolog*." | |
410 (interactive) | |
411 (require 'comint) | |
412 (switch-to-buffer (make-comint "prolog" prolog-program-name)) | |
413 (inferior-prolog-mode)) | |
414 @end smallexample | |
415 | |
416 @noindent | |
417 The expression @code{(require 'comint)} loads the file @file{comint.el} | |
418 if it has not yet been loaded. This ensures that @code{make-comint} is | |
419 defined. | |
420 | |
421 The @file{comint.el} file contains the following top-level expression: | |
422 | |
423 @smallexample | |
424 (provide 'comint) | |
425 @end smallexample | |
426 | |
427 @noindent | |
428 This adds @code{comint} to the global @code{features} list, so that | |
429 @code{(require 'comint)} will henceforth know that nothing needs to be | |
430 done. | |
431 | |
432 @cindex byte-compiling @code{require} | |
7212 | 433 When @code{require} is used at top level in a file, it takes effect |
6453 | 434 when you byte-compile that file (@pxref{Byte Compilation}) as well as |
435 when you load it. This is in case the required package contains macros | |
436 that the byte compiler must know about. | |
437 | |
438 Although top-level calls to @code{require} are evaluated during | |
439 byte compilation, @code{provide} calls are not. Therefore, you can | |
440 ensure that a file of definitions is loaded before it is byte-compiled | |
441 by including a @code{provide} followed by a @code{require} for the same | |
442 feature, as in the following example. | |
443 | |
444 @smallexample | |
445 @group | |
446 (provide 'my-feature) ; @r{Ignored by byte compiler,} | |
447 ; @r{evaluated by @code{load}.} | |
448 (require 'my-feature) ; @r{Evaluated by byte compiler.} | |
449 @end group | |
450 @end smallexample | |
451 | |
7212 | 452 @noindent |
453 The compiler ignores the @code{provide}, then processes the | |
454 @code{require} by loading the file in question. Loading the file does | |
455 execute the @code{provide} call, so the subsequent @code{require} call | |
456 does nothing while loading. | |
457 | |
6453 | 458 @defun provide feature |
459 This function announces that @var{feature} is now loaded, or being | |
460 loaded, into the current Emacs session. This means that the facilities | |
461 associated with @var{feature} are or will be available for other Lisp | |
462 programs. | |
463 | |
464 The direct effect of calling @code{provide} is to add @var{feature} to | |
465 the front of the list @code{features} if it is not already in the list. | |
466 The argument @var{feature} must be a symbol. @code{provide} returns | |
467 @var{feature}. | |
468 | |
469 @smallexample | |
470 features | |
471 @result{} (bar bish) | |
472 | |
473 (provide 'foo) | |
474 @result{} foo | |
475 features | |
476 @result{} (foo bar bish) | |
477 @end smallexample | |
478 | |
479 If the file isn't completely loaded, due to an error in the evaluating | |
480 its contents, any function definitions or @code{provide} calls that | |
481 occurred during the load are undone. @xref{Autoload}. | |
482 @end defun | |
483 | |
484 @defun require feature &optional filename | |
485 This function checks whether @var{feature} is present in the current | |
486 Emacs session (using @code{(featurep @var{feature})}; see below). If it | |
487 is not, then @code{require} loads @var{filename} with @code{load}. If | |
488 @var{filename} is not supplied, then the name of the symbol | |
489 @var{feature} is used as the file name to load. | |
490 | |
491 If loading the file fails to provide @var{feature}, @code{require} | |
492 signals an error, @samp{Required feature @var{feature} was not | |
493 provided}. | |
494 @end defun | |
495 | |
496 @defun featurep feature | |
497 This function returns @code{t} if @var{feature} has been provided in the | |
498 current Emacs session (i.e., @var{feature} is a member of | |
499 @code{features}.) | |
500 @end defun | |
501 | |
502 @defvar features | |
503 The value of this variable is a list of symbols that are the features | |
504 loaded in the current Emacs session. Each symbol was put in this list | |
505 with a call to @code{provide}. The order of the elements in the | |
506 @code{features} list is not significant. | |
507 @end defvar | |
508 | |
509 @node Unloading | |
510 @section Unloading | |
511 @cindex unloading | |
512 | |
513 @c Emacs 19 feature | |
514 You can discard the functions and variables loaded by a library to | |
515 reclaim memory for other Lisp objects. To do this, use the function | |
516 @code{unload-feature}: | |
517 | |
10513
e4423ed2b4cb
Document force arg in unload-feature.
Richard M. Stallman <rms@gnu.org>
parents:
7212
diff
changeset
|
518 @deffn Command unload-feature feature &optional force |
6453 | 519 This command unloads the library that provided feature @var{feature}. |
7212 | 520 It undefines all functions, macros, and variables defined in that |
521 library with @code{defconst}, @code{defvar}, @code{defun}, | |
522 @code{defmacro}, @code{defsubst} and @code{defalias}. It then restores | |
523 any autoloads formerly associated with those symbols. | |
10513
e4423ed2b4cb
Document force arg in unload-feature.
Richard M. Stallman <rms@gnu.org>
parents:
7212
diff
changeset
|
524 |
e4423ed2b4cb
Document force arg in unload-feature.
Richard M. Stallman <rms@gnu.org>
parents:
7212
diff
changeset
|
525 Ordinarily, @code{unload-feature} refuses to unload a library on which |
e4423ed2b4cb
Document force arg in unload-feature.
Richard M. Stallman <rms@gnu.org>
parents:
7212
diff
changeset
|
526 other loaded libraries depend. (A library @var{a} depends on library |
e4423ed2b4cb
Document force arg in unload-feature.
Richard M. Stallman <rms@gnu.org>
parents:
7212
diff
changeset
|
527 @var{b} if @var{a} contains a @code{require} for @var{b}.) If the |
e4423ed2b4cb
Document force arg in unload-feature.
Richard M. Stallman <rms@gnu.org>
parents:
7212
diff
changeset
|
528 optional argument @var{force} is non-@code{nil}, dependencies are |
e4423ed2b4cb
Document force arg in unload-feature.
Richard M. Stallman <rms@gnu.org>
parents:
7212
diff
changeset
|
529 ignored and you can unload any library. |
6453 | 530 @end deffn |
531 | |
532 The @code{unload-feature} function is written in Lisp; its actions are | |
533 based on the variable @code{load-history}. | |
534 | |
535 @defvar load-history | |
536 This variable's value is an alist connecting library names with the | |
537 names of functions and variables they define, the features they provide, | |
538 and the features they require. | |
539 | |
540 Each element is a list and describes one library. The @sc{car} of the | |
541 list is the name of the library, as a string. The rest of the list is | |
542 composed of these kinds of objects: | |
543 | |
544 @itemize @bullet | |
545 @item | |
7212 | 546 Symbols that were defined by this library. |
6453 | 547 @item |
548 Lists of the form @code{(require . @var{feature})} indicating | |
549 features that were required. | |
550 @item | |
551 Lists of the form @code{(provide . @var{feature})} indicating | |
552 features that were provided. | |
553 @end itemize | |
554 | |
555 The value of @code{load-history} may have one element whose @sc{car} is | |
556 @code{nil}. This element describes definitions made with | |
557 @code{eval-buffer} on a buffer that is not visiting a file. | |
558 @end defvar | |
559 | |
560 The command @code{eval-region} updates @code{load-history}, but does so | |
561 by adding the symbols defined to the element for the file being visited, | |
562 rather than replacing that element. | |
563 | |
564 @node Hooks for Loading | |
565 @section Hooks for Loading | |
566 @cindex loading hooks | |
567 @cindex hooks for loading | |
568 | |
569 You can ask for code to be executed if and when a particular library is | |
570 loaded, by calling @code{eval-after-load}. | |
571 | |
572 @defun eval-after-load library form | |
573 This function arranges to evaluate @var{form} at the end of loading the | |
574 library @var{library}, if and when @var{library} is loaded. | |
575 | |
576 The library name @var{library} must exactly match the argument of | |
577 @code{load}. To get the proper results when an installed library is | |
578 found by searching @code{load-path}, you should not include any | |
579 directory names in @var{library}. | |
580 | |
581 An error in @var{form} does not undo the load, but does prevent | |
582 execution of the rest of @var{form}. | |
583 @end defun | |
584 | |
585 @defvar after-load-alist | |
586 An alist of expressions to evaluate if and when particular libraries are | |
587 loaded. Each element looks like this: | |
588 | |
589 @example | |
590 (@var{filename} @var{forms}@dots{}) | |
591 @end example | |
592 | |
593 The function @code{load} checks @code{after-load-alist} in order to | |
594 implement @code{eval-after-load}. | |
595 @end defvar | |
596 | |
597 @c Emacs 19 feature |