Mercurial > emacs
annotate lisp/hilit-chg.el @ 30375:5c4951d58989
(Recognize Coding): Document the variable inhibit-iso-escape-detection.
author | Eli Zaretskii <eliz@gnu.org> |
---|---|
date | Sat, 22 Jul 2000 10:12:00 +0000 |
parents | 1e3c0447c01a |
children | 2c331adfa151 |
rev | line source |
---|---|
22957 | 1 ;;; hilit-chg.el --- minor mode displaying buffer changes with special face |
2 | |
3 ;; Copyright (C) 1998 Free Software Foundation, Inc. | |
4 | |
23614 | 5 ;; Author: Richard Sharman <rsharman@pobox.com> |
22957 | 6 ;; Keywords: faces |
7 | |
23101 | 8 ;; This file is part of GNU Emacs. |
9 | |
22957 | 10 ;; This program is free software; you can redistribute it and/or modify |
11 ;; it under the terms of the GNU General Public License as published by | |
12 ;; the Free Software Foundation; either version 2, or (at your option) | |
13 ;; any later version. | |
14 | |
15 ;; This program is distributed in the hope that it will be useful, | |
16 ;; but WITHOUT ANY WARRANTY; without even the implied warranty of | |
17 ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
18 ;; GNU General Public License for more details. | |
19 | |
20 ;; You should have received a copy of the GNU General Public License | |
21 ;; along with GNU Emacs; see the file COPYING. If not, write to the | |
22 ;; Free Software Foundation, Inc., 59 Temple Place - Suite 330, | |
23 ;; Boston, MA 02111-1307, USA. | |
24 | |
25 | |
26 ;;; Commentary: | |
27 | |
28 ;; A minor mode: "Highlight Changes mode". | |
29 ;; | |
30 | |
31 ;; Highlight Changes mode has 2 submodes: active and passive. | |
32 ;; When active, changes to the buffer are displayed in a different face. | |
33 ;; When passive, any existing displayed changes are saved and new ones | |
34 ;; recorded but are not displayed differently. | |
35 ;; Why active and passive? Having the changes visible can be handy when you | |
36 ;; want the information but very distracting otherwise. So, you can keep | |
37 ;; Highlight Changes mode in passive state while you make your changes, toggle | |
38 ;; it on to active mode to see them, then toggle it back off to avoid | |
39 ;; distraction. | |
40 ;; | |
41 ;; When active, changes are displayed in `highlight-changes-face'. When | |
42 ;; text is deleted, the following character is displayed in | |
43 ;; `highlight-changes-delete-face' face. | |
44 ;; | |
45 ;; | |
46 ;; You can "age" different sets of changes by using | |
47 ;; `highlight-changes-rotate-faces'. This rotates different through a series | |
48 ;; of different faces, so you can distinguish "new" changes from "older" | |
23046 | 49 ;; changes. You can customize these "rotated" faces in two ways. You can |
22957 | 50 ;; either explicitly define each face by customizing |
51 ;; `highlight-changes-face-list'. If, however, the faces differ from | |
52 ;; `highlight-changes-face' only in the foreground colour, you can simply set | |
53 ;; `highlight-changes-colours'. If `highlight-changes-face-list' is nil when | |
54 ;; the faces are required they will be constructed from | |
55 ;; `highlight-changes-colours'. | |
56 ;; | |
57 ;; | |
58 ;; When a Highlight Changes mode is on (either active or passive) you can go | |
59 ;; to the next or previous change with `highlight-changes-next-change' and | |
60 ;; `highlight-changes-previous-change'. | |
61 ;; | |
62 ;; | |
23289 | 63 ;; You can also use the command highlight-compare-with-file to show changes |
64 ;; in this file compared with another file (typically the previous version | |
65 ;; of the file). | |
22957 | 66 ;; |
67 ;; | |
68 ;; There are currently three hooks run by `highlight-changes-mode': | |
69 ;; `highlight-changes-enable-hook' - is run when Highlight Changes mode | |
70 ;; is initially enabled for a buffer. | |
71 ;; `highlight-changes-disable-hook' - is run when Highlight Changes mode | |
72 ;; is turned off. | |
73 ;; `highlight-changes-toggle-hook' - is run each time `highlight-changes-mode' | |
74 ;; is called. Typically this is when | |
75 ;; toggling between active and passive | |
76 ;; modes. The variable | |
77 ;; `highlight-changes-mode' contains the new | |
78 ;; state (`active' or `passive'.) | |
79 ;; | |
80 ;; | |
81 ;; | |
82 ;; Example usage: | |
83 ;; (defun my-highlight-changes-enable-hook () | |
84 ;; (add-hook 'local-write-file-hooks 'highlight-changes-rotate-faces) | |
85 ;; ) | |
86 ;; | |
87 ;; (defun my-highlight-changes-disable-hook () | |
88 ;; (remove-hook 'local-write-file-hooks 'highlight-changes-rotate-faces) | |
89 ;; ) | |
90 ;; | |
91 ;; (add-hook 'highlight-changes-enable-hook 'my-highlight-changes-enable-hook) | |
92 ;; (add-hook 'highlight-changes-disable-hook | |
93 ;; 'my-highlight-changes-disable-hook) | |
94 | |
95 | |
30223 | 96 ;; Explcit vs. Implicit |
22957 | 97 ;; |
98 | |
99 ;; Normally, Highlight Changes mode is turned on explicitly in a buffer. | |
100 ;; | |
101 ;; If you prefer to have it automatically invoked you can do it as | |
102 ;; follows. | |
103 ;; | |
104 ;; 1. Most modes have a major-hook, typically called MODE-hook. You | |
105 ;; can use `add-hook' to call `highlight-changes-mode'. | |
106 ;; | |
107 ;; Example: | |
108 ;; (add-hook 'c-mode-hook 'highlight-changes-mode) | |
109 ;; | |
110 ;; If you want to make it start up in passive mode (regardless of the | |
111 ;; setting of highlight-changes-initial-state): | |
112 ;; (add-hook 'emacs-lisp-mode-hook | |
113 ;; (lambda () | |
114 ;; (highlight-changes-mode 'passive))) | |
115 ;; | |
116 ;; However, this cannot be done for Fundamental mode for there is no | |
117 ;; such hook. | |
118 ;; | |
119 ;; 2. You can use the function `global-highlight-changes' | |
120 ;; | |
121 ;; This function, which is fashioned after the way `global-font-lock' works, | |
122 ;; toggles on or off global Highlight Changes mode. When activated, it turns | |
123 ;; on Highlight Changes mode in all "suitable" existings buffers and will turn | |
124 ;; it on in new "suitable" buffers to be created. | |
125 ;; | |
126 ;; A buffer's "suitability" is determined by variable | |
127 ;; `highlight-changes-global-modes', as follows. If the variable is | |
128 ;; * nil -- then no buffers are suitable; | |
129 ;; * a function -- this function is called and the result is used. As | |
130 ;; an example, if the value is 'buffer-file-name then all buffers | |
131 ;; who are visiting files are suitable, but others (like dired | |
132 ;; buffers) are not; | |
133 ;; * a list -- then if the buufer is suitable iff its mode is in the | |
134 ;; list, exccept if the first element is nil in which case the test | |
135 ;; is reversed (i.e. it is a list of unsuitable modes). | |
136 ;; * Otherwise, the buffer is suitable if its name does not begin with | |
137 ;; ` ' or `*' and if `buffer-file-name' returns true. | |
138 ;; | |
139 | |
140 | |
141 | |
142 ;; Possible bindings: | |
143 ;; (global-set-key '[C-right] 'highlight-changes-next-change) | |
144 ;; (global-set-key '[C-left] 'highlight-changes-previous-change) | |
145 ;; | |
146 ;; Other interactive functions (which could be bound if desired): | |
147 ;; highlight-changes-mode | |
148 ;; highlight-changes-remove-highlight | |
149 ;; highlight-changes-rotate-faces | |
23289 | 150 ;; highlight-compare-with-file |
22957 | 151 |
152 ;; | |
153 ;; You can automatically rotate faces when the buffer is saved; | |
154 ;; see function `highlight-changes-rotate-faces' for how to do this. | |
155 ;; | |
156 | |
157 | |
158 ;;; Bugs: | |
159 | |
160 ;; - the next-change and previous-change functions are too literal; | |
161 ;; they should find the next "real" change, in other words treat | |
162 ;; consecutive changes as one. | |
163 | |
164 | |
165 ;;; To do (maybe), notes, ... | |
166 | |
167 ;; - having different faces for deletion and non-deletion: is it | |
168 ;; really worth the hassle? | |
169 ;; - should have better hooks: when should they be run? | |
23289 | 170 ;; - highlight-compare-with-file should allow RCS files - e.g. nice to be |
171 ;; able to say show changes compared with version 2.1. | |
22957 | 172 ;; - Maybe we should have compare-with-buffer as well. (When I tried |
173 ;; a while back I ran into a problem with ediff-buffers-internal.) | |
174 | |
175 | |
176 ;;; History: | |
177 | |
178 ;; R Sharman (rsharman@magma.ca) Feb 1998: | |
179 ;; - initial release as change-mode. | |
180 ;; Jari Aalto <jari.aalto@ntc.nokia.com> Mar 1998 | |
181 ;; - fixes for byte compile errors | |
182 ;; - use eval-and-compile for autoload | |
183 ;; Marijn Ros <J.M.Ros@fys.ruu.nl> Mar 98 | |
184 ;; - suggested turning it on by default | |
185 ;; Eric Ludlam <zappo@gnu.org> Suggested using overlays. | |
186 ;; July 98 | |
187 ;; - global mode and various stuff added | |
188 ;; - Changed to use overlays | |
189 ;; August 98 | |
190 ;; - renmaed to Highlight Changes mode. | |
191 | |
192 | |
193 ;;; Code: | |
194 | |
195 (require 'wid-edit) | |
196 | |
197 ;; ====================== Customization ======================= | |
198 (defgroup highlight-changes nil | |
199 "Highlight Changes mode." | |
24554
9a9a307e9a57
(highlight-changes): Add defgroup :version.
Dave Love <fx@gnu.org>
parents:
23614
diff
changeset
|
200 :version "20.4" |
22957 | 201 :group 'faces) |
202 | |
203 | |
204 ;; Face information: How the changes appear. | |
205 | |
206 ;; Defaults for face: red foreground, no change to background, | |
207 ;; and underlined if a change is because of a deletion. | |
208 ;; Note: underlining is helpful in that is shows up changes in white space. | |
209 ;; However, having it set for non-delete changes can be annoying because all | |
210 ;; indentation on inserts gets underlined (which can look pretty ugly!). | |
211 | |
212 (defface highlight-changes-face | |
213 '((((class color)) (:foreground "red" )) | |
214 (t (:inverse-video t))) | |
215 "Face used for highlighting changes." | |
216 :group 'highlight-changes | |
217 ) | |
218 | |
219 ;; This looks pretty ugly, actually. Maybe the underline should be removed. | |
220 (defface highlight-changes-delete-face | |
221 '((((class color)) (:foreground "red" :underline t)) | |
222 (t (:inverse-video t))) | |
223 "Face used for highlighting deletions." | |
224 :group 'highlight-changes | |
225 ) | |
226 | |
227 | |
228 | |
229 ;; A (not very good) default list of colours to rotate through. | |
230 ;; | |
231 (defcustom highlight-changes-colours | |
232 (if (eq (frame-parameter nil 'background-mode) 'light) | |
233 ;; defaults for light background: | |
234 '( "magenta" "blue" "darkgreen" "chocolate" "sienna4" "NavyBlue") | |
235 ;; defaults for dark background: | |
236 '("yellow" "magenta" "blue" "maroon" "firebrick" "green4" "DarkOrchid")) | |
237 "*Colours used by `highlight-changes-rotate-faces'. | |
238 The newest rotated change will be displayed in the first element of this list, | |
239 the next older will be in the second element etc. | |
240 | |
241 This list is used if `highlight-changes-face-list' is nil, otherwise that | |
242 variable overrides this list. If you only care about foreground | |
243 colours then use this, if you want fancier faces then set | |
244 `highlight-changes-face-list'." | |
245 :type '(repeat color) | |
246 :group 'highlight-changes | |
247 ) | |
248 | |
249 | |
250 ;; If you invoke highlight-changes-mode with no argument, should it start in | |
251 ;; active or passive mode? | |
252 ;; | |
253 (defcustom highlight-changes-initial-state 'active | |
254 "*What state (active or passive) `highlight-changes' should start in. | |
255 This is used when `highlight-changes' is called with no argument. | |
256 This variable must be set to one of the symbols `active' or `passive'." | |
257 :type '(choice (const :tag "Active" active) | |
258 (const :tag "Passive" passive)) | |
259 :group 'highlight-changes | |
260 ) | |
261 | |
262 (defcustom highlight-changes-global-initial-state 'passive | |
263 "*What state `global-highlight-changes' should start in. | |
264 This is used if `global-highlight-changes' is called with no argument. | |
265 This variable must be set to either `active' or `passive'" | |
266 :type '(choice (const :tag "Active" active) | |
267 (const :tag "Passive" passive)) | |
268 :group 'highlight-changes | |
269 ) | |
270 | |
271 ;; The strings displayed in the mode-line for the minor mode: | |
272 (defcustom highlight-changes-active-string nil | |
273 "*The string used when Highlight Changes mode is in the active state. | |
274 This should be set to nil if no indication is desired, or to | |
275 a string with a leading space." | |
276 :type '(choice string | |
277 (const :tag "None" nil)) | |
278 :group 'highlight-changes | |
279 ) | |
280 | |
281 (defcustom highlight-changes-passive-string " Chg" | |
282 "*The string used when Highlight Changes mode is in the passive state. | |
283 This should be set to nil if no indication is desired, or to | |
284 a string with a leading space." | |
285 :type '(choice string | |
286 (const :tag "None" nil)) | |
287 :group 'highlight-changes | |
288 ) | |
289 | |
290 (defcustom highlight-changes-global-modes t | |
291 "*Determine whether a buffer is suitable for global Highlight Changes mode. | |
292 | |
293 A function means that function is called: if it returns non-nil the | |
294 buffer is suitable. | |
295 | |
296 A list is a list of modes for which it is suitable, or a list whose | |
297 first element is 'not followed by modes which are not suitable. | |
298 | |
299 t means the buffer is suitable if its name does not begin with ` ' nor | |
300 `*' and the buffer has a filename. | |
301 | |
302 nil means no buffers are suitable for `global-highlight-changes' | |
303 (effectively disabling the mode). | |
304 | |
305 Examples: | |
306 (c-mode c++-mode) | |
307 means that Highlight Changes mode is turned on for buffers in C and C++ | |
308 modes only." | |
309 :type '(choice | |
310 (const :tag "all non-special buffers visiting files" t) | |
311 (set :menu-tag "specific modes" :tag "modes" | |
312 :value (not) | |
313 (const :tag "All except these" not) | |
314 (repeat :tag "Modes" :inline t (symbol :tag "mode"))) | |
315 (function :menu-tag "determined by function" | |
316 :value buffer-file-name) | |
317 (const :tag "none" nil) | |
318 ) | |
319 :group 'highlight-changes | |
320 ) | |
321 | |
322 | |
323 (defvar global-highlight-changes nil) | |
324 | |
325 (defcustom highlight-changes-global-changes-existing-buffers nil | |
326 "*If non-nil toggling global Highlight Changes mode affects existing buffers. | |
327 Normally, `global-highlight-changes' means affects only new buffers (to be | |
328 created). However, if highlight-changes-global-changes-existing-buffers | |
329 is non-nil then turning on `global-highlight-changes' will turn on | |
330 highlight-changes-mode in suitable buffers and turning the mode off will | |
331 remove it from existing buffers." | |
332 :type 'boolean | |
333 :group 'highlight-changes) | |
334 | |
335 (defun hilit-chg-cust-fix-changes-face-list (w wc &optional event) | |
336 ;; When customization function `highlight-changes-face-list' inserts a new | |
337 ;; face it uses the default face. We don't want the user to modify this | |
338 ;; face, so we rename the faces in the list on an insert. The rename is | |
339 ;; actually done by copying the faces so user-defined faces still remain | |
340 ;; in the same order. | |
341 ;; The notifying the parent is needed because without it changes to the | |
342 ;; faces are saved but not to the actual list itself. | |
343 (let ((old-list (widget-value w))) | |
344 (if (member 'default old-list) | |
345 (let | |
346 ((p (reverse old-list)) | |
347 (n (length old-list)) | |
348 new-name old-name | |
349 (new-list nil) | |
350 ) | |
351 (while p | |
352 (setq old-name (car p)) | |
353 (setq new-name (intern (format "highlight-changes-face-%d" n))) | |
354 (if (eq old-name new-name) | |
355 nil | |
356 ;; A new face has been inserted: we don't want to modify the | |
357 ;; default face so copy it. Better, though, (I think) is to | |
358 ;; make a new face have the same attributes as | |
359 ;; highlight-changes-face . | |
360 (if (eq old-name 'default) | |
361 (copy-face 'highlight-changes-face new-name) | |
362 (copy-face old-name new-name) | |
363 )) | |
364 (setq new-list (append (list new-name) new-list)) | |
365 (setq n (1- n)) | |
366 (setq p (cdr p))) | |
367 (if (equal new-list (widget-value w)) | |
368 nil ;; (message "notify: no change!") | |
369 (widget-value-set w new-list) | |
370 (widget-setup) | |
371 ) | |
372 ) | |
373 ;; (message "notify: no default here!") | |
374 )) | |
375 (let ((parent (widget-get w :parent))) | |
376 (when parent | |
377 (widget-apply parent :notify w event))) | |
378 ) | |
379 | |
380 | |
381 (defcustom highlight-changes-face-list nil | |
382 "*A list of faces used when rotatating changes. | |
383 Normally the variable is initialized to nil and the list is created from | |
384 `highlight-changes-colours' when needed. However, you can set this variable | |
385 to any list of faces. You will have to do this if you want faces which | |
386 don't just differ from `highlight-changes-face' by the foreground colour. | |
387 Otherwise, this list will be constructed when needed from | |
388 `highlight-changes-colours'." | |
389 :type '(choice | |
390 (repeat | |
391 :notify hilit-chg-cust-fix-changes-face-list | |
392 face ) | |
393 (const :tag "Derive from highlight-changes-colours" nil) | |
394 ) | |
395 :group 'highlight-changes | |
396 ) | |
397 | |
398 ;; ======================================================================== | |
399 | |
400 ;; These shouldn't be changed! | |
401 | |
25533
121060238dc8
(highlight-changes-mode): Add autoload cookie for variable.
Dave Love <fx@gnu.org>
parents:
24554
diff
changeset
|
402 ;; Autoload for the benefit of `make-mode-line-mouse-sensitive'. |
121060238dc8
(highlight-changes-mode): Add autoload cookie for variable.
Dave Love <fx@gnu.org>
parents:
24554
diff
changeset
|
403 ;;;###autoload |
22957 | 404 (defvar highlight-changes-mode nil) |
405 (defvar hilit-chg-list nil) | |
406 (defvar hilit-chg-string " ??") | |
407 (or (assq 'highlight-changes-mode minor-mode-alist) | |
408 (setq minor-mode-alist | |
409 (cons '(highlight-changes-mode hilit-chg-string) minor-mode-alist) | |
410 )) | |
411 (make-variable-buffer-local 'highlight-changes-mode) | |
412 (make-variable-buffer-local 'hilit-chg-string) | |
413 | |
414 | |
415 | |
416 (eval-and-compile | |
23289 | 417 ;; For highlight-compare-with-file |
22957 | 418 (defvar ediff-number-of-differences) |
419 (autoload 'ediff-setup "ediff") | |
420 (autoload 'ediff-with-current-buffer "ediff") | |
421 (autoload 'ediff-really-quit "ediff") | |
422 (autoload 'ediff-make-fine-diffs "ediff") | |
423 (autoload 'ediff-get-fine-diff-vector "ediff") | |
424 (autoload 'ediff-get-difference "ediff") | |
425 ) | |
426 | |
427 | |
428 | |
429 ;;; Functions... | |
430 | |
431 (defun hilit-chg-map-changes (func &optional start-position end-position) | |
432 "Call function FUNC for each region used by Highlight Changes mode." | |
433 ;; if start-position is nil, (point-min) is used | |
434 ;; if end-position is nil, (point-max) is used | |
435 ;; FUNC is called with 3 params: property start stop | |
436 (let ((start (or start-position (point-min))) | |
437 (limit (or end-position (point-max))) | |
438 prop end) | |
439 (while (and start (< start limit)) | |
440 (setq prop (get-text-property start 'hilit-chg)) | |
441 (setq end (text-property-not-all start limit 'hilit-chg prop)) | |
442 (if prop | |
443 (funcall func prop start (or end limit))) | |
444 (setq start end) | |
445 ))) | |
446 | |
447 | |
448 (defun hilit-chg-display-changes (&optional beg end) | |
449 "Display face information for Highlight Changes mode. | |
450 | |
451 An overlay containing a change face is added, from the information | |
452 in the text property of type change. | |
453 | |
454 This is the opposite of hilit-chg-hide-changes." | |
455 (hilit-chg-map-changes 'hilit-chg-make-ov beg end)) | |
456 | |
457 | |
458 (defun hilit-chg-make-ov (prop start end) | |
459 ;; for the region make change overlays corresponding to | |
460 ;; the text property 'hilit-chg | |
461 (let ((ov (make-overlay start end)) | |
462 face) | |
463 (or prop | |
464 (error "hilit-chg-make-ov: prop is nil")) | |
465 (if (eq prop 'hilit-chg-delete) | |
466 (setq face 'highlight-changes-delete-face) | |
467 (setq face (nth 1 (member prop hilit-chg-list)))) | |
468 (if face | |
469 (progn | |
470 ;; We must mark the face, that is the purpose of the overlay | |
471 (overlay-put ov 'face face) | |
472 ;; I don't think we need to set evaporate since we should | |
473 ;; be controlling them! | |
474 (overlay-put ov 'evaporate t) | |
475 ;; We set the change property so we can tell this is one | |
476 ;; of our overlays (so we don't delete someone else's). | |
477 (overlay-put ov 'hilit-chg t) | |
478 ) | |
479 (error "hilit-chg-make-ov: no face for prop: %s" prop) | |
480 ) | |
481 )) | |
482 | |
483 (defun hilit-chg-hide-changes (&optional beg end) | |
484 "Remove face information for Highlight Changes mode. | |
485 | |
486 The overlay containing the face is removed, but the text property | |
487 containing the change information is retained. | |
488 | |
489 This is the opposite of hilit-chg-display-changes." | |
490 (let ((start (or beg (point-min))) | |
491 (limit (or end (point-max))) | |
492 p ov) | |
493 (setq p (overlays-in start limit)) | |
494 (while p | |
495 ;; don't delete the overlay if it isn't ours! | |
496 (if (overlay-get (car p) 'hilit-chg) | |
497 (delete-overlay (car p))) | |
498 (setq p (cdr p)) | |
499 ))) | |
500 | |
501 (defun hilit-chg-fixup (beg end) | |
502 "Fix change overlays in region beg .. end. | |
503 | |
504 Ensure the overlays agree with the changes as determined from | |
505 the text properties of type `hilit-chg' ." | |
506 ;; Remove or alter overlays in region beg..end | |
507 (let (p ov ov-start ov-end | |
508 props q) | |
509 (setq p (overlays-in beg end)) | |
510 ;; temp for debugging: | |
511 ;; (or (eq highlight-changes-mode 'active) | |
512 ;; (error "hilit-chg-fixup called but Highlight Changes mode not active")) | |
513 (while p | |
514 (setq ov (car p)) | |
515 (setq ov-start (overlay-start ov)) | |
516 (setq ov-end (overlay-end ov)) | |
517 (if (< ov-start beg) | |
518 (progn | |
519 (move-overlay ov ov-start beg) | |
520 (if (> ov-end end) | |
521 (progn | |
522 (setq props (overlay-properties ov)) | |
523 (setq ov (make-overlay end ov-end)) | |
524 (while props | |
525 (overlay-put ov (car props)(car (cdr props))) | |
526 (setq props (cdr (cdr props)))) | |
527 ) | |
528 ) | |
529 ) | |
530 (if (> ov-end end) | |
531 (move-overlay ov end ov-end) | |
532 (delete-overlay ov) | |
533 )) | |
534 (setq p (cdr p))) | |
535 (hilit-chg-display-changes beg end) | |
536 )) | |
537 | |
538 | |
539 | |
540 | |
541 | |
542 | |
543 ;;;###autoload | |
544 (defun highlight-changes-remove-highlight (beg end) | |
545 "Remove the change face from the region. | |
546 This allows you to manually remove highlighting from uninteresting changes." | |
547 (interactive "r") | |
548 (let ((after-change-functions nil)) | |
549 (remove-text-properties beg end '(hilit-chg nil)) | |
550 (hilit-chg-fixup beg end))) | |
551 | |
552 (defun hilit-chg-set-face-on-change (beg end leng-before | |
553 &optional no-proerty-change) | |
554 "Record changes and optionally display them in a distinctive face. | |
555 `hilit-chg-set' adds this function to the `after-change-functions' hook." | |
556 ;; | |
557 ;; This function is called by the `after-change-functions' hook, which | |
558 ;; is how we are notified when text is changed. | |
23289 | 559 ;; It is also called from `highlight-compare-with-file'. |
22957 | 560 ;; |
561 ;; We do NOT want to simply do this if this is an undo command, because | |
562 ;; otherwise an undone change shows up as changed. While the properties | |
563 ;; are automatically restored by undo, we must fixup the overlay. | |
564 (save-match-data | |
565 (let ((beg-decr 1) (end-incr 1) | |
566 (type 'hilit-chg) | |
567 old) | |
568 (if undo-in-progress | |
569 (if (eq highlight-changes-mode 'active) | |
570 (hilit-chg-fixup beg end)) | |
571 (if (and (= beg end) (> leng-before 0)) | |
572 ;; deletion | |
573 (progn | |
574 ;; The eolp and bolp tests are a kludge! But they prevent | |
575 ;; rather nasty looking displays when deleting text at the end | |
576 ;; of line, such as normal corrections as one is typing and | |
577 ;; immediately makes a corrections, and when deleting first | |
578 ;; character of a line. | |
579 ;;; (if (= leng-before 1) | |
580 ;;; (if (eolp) | |
581 ;;; (setq beg-decr 0 end-incr 0) | |
582 ;;; (if (bolp) | |
583 ;;; (setq beg-decr 0)))) | |
584 ;;; (setq beg (max (- beg beg-decr) (point-min))) | |
585 (setq end (min (+ end end-incr) (point-max))) | |
586 (setq type 'hilit-chg-delete)) | |
587 ;; Not a deletion. | |
588 ;; Most of the time the following is not necessary, but | |
589 ;; if the current text was marked as a deletion then | |
590 ;; the old overlay is still in effect, so if we add some | |
591 ;; text then remove the deletion marking, but set it to | |
592 ;; changed otherwise its highlighting disappears. | |
593 (if (eq (get-text-property end 'hilit-chg) 'hilit-chg-delete) | |
594 (progn | |
595 (remove-text-properties end (+ end 1) '(hilit-chg nil)) | |
596 (put-text-property end (+ end 1) 'hilit-chg 'hilit-chg) | |
597 (if (eq highlight-changes-mode 'active) | |
598 (hilit-chg-fixup beg (+ end 1)))))) | |
599 (unless no-proerty-change | |
600 (put-text-property beg end 'hilit-chg type)) | |
601 (if (or (eq highlight-changes-mode 'active) no-proerty-change) | |
602 (hilit-chg-make-ov type beg end)) | |
603 )))) | |
604 | |
605 | |
606 | |
607 | |
608 | |
609 (defun hilit-chg-set (value) | |
610 "Turn on Highlight Changes mode for this buffer." | |
611 (setq highlight-changes-mode value) | |
612 (remove-hook 'after-change-functions 'hilit-chg-set-face-on-change t) | |
613 (hilit-chg-make-list) | |
614 (if (eq highlight-changes-mode 'active) | |
615 (progn | |
616 (setq hilit-chg-string highlight-changes-active-string) | |
617 (or buffer-read-only | |
618 (hilit-chg-display-changes))) | |
619 ;; mode is passive | |
620 (setq hilit-chg-string highlight-changes-passive-string) | |
621 (or buffer-read-only | |
622 (hilit-chg-hide-changes)) | |
623 ) | |
624 (force-mode-line-update) | |
625 (make-local-hook 'after-change-functions) | |
626 (add-hook 'after-change-functions 'hilit-chg-set-face-on-change nil t) | |
627 ) | |
628 | |
629 (defun hilit-chg-clear () | |
630 "Remove Highlight Changes mode for this buffer. | |
631 This removes all saved change information." | |
632 (if buffer-read-only | |
633 ;; We print the buffer name because this function could be called | |
634 ;; on many buffers from `global-highlight-changes'. | |
635 (message "Cannot remove highlighting from read-only mode buffer %s" | |
636 (buffer-name)) | |
637 (remove-hook 'after-change-functions 'hilit-chg-set-face-on-change t) | |
638 (let ((after-change-functions nil)) | |
639 (hilit-chg-hide-changes) | |
640 (hilit-chg-map-changes | |
641 '(lambda (prop start stop) | |
642 (remove-text-properties start stop '(hilit-chg nil)))) | |
643 ) | |
644 (setq highlight-changes-mode nil) | |
645 (force-mode-line-update) | |
646 ;; If we type: C-u -1 M-x highlight-changes-mode | |
647 ;; we want to turn it off, but hilit-chg-post-command-hook | |
648 ;; runs and that turns it back on! | |
649 (remove-hook 'post-command-hook 'hilit-chg-post-command-hook) | |
650 )) | |
651 | |
652 ;;;###autoload | |
653 (defun highlight-changes-mode (&optional arg) | |
654 "Toggle (or initially set) Highlight Changes mode. | |
655 | |
656 Without an argument, | |
657 if Highlight Changes mode is not enabled, then enable it (to either active | |
658 or passive as determined by variable highlight-changes-initial-state); | |
659 otherwise, toggle between active and passive states. | |
660 | |
661 With an argument, | |
662 if just C-u or a positive argument, set state to active; | |
663 with a zero argument, set state to passive; | |
664 with a negative argument, disable Highlight Changes mode completely. | |
665 | |
666 Active state - means changes are shown in a distinctive face. | |
667 Passive state - means changes are kept and new ones recorded but are | |
668 not displayed in a different face. | |
669 | |
670 Functions: | |
671 \\[highlight-changes-next-change] - move point to beginning of next change | |
672 \\[highlight-changes-previous-change] - move to beginning of previous change | |
23289 | 673 \\[highlight-compare-with-file] - mark text as changed by comparing this |
674 buffer with the contents of a file | |
22957 | 675 \\[highlight-changes-remove-highlight] - remove the change face from the region |
676 \\[highlight-changes-rotate-faces] - rotate different \"ages\" of changes \ | |
677 through | |
678 various faces. | |
679 | |
680 | |
681 Hook variables: | |
682 highlight-changes-enable-hook - when Highlight Changes mode enabled. | |
683 highlight-changes-toggle-hook - when entering active or passive state | |
684 highlight-changes-disable-hook - when turning off Highlight Changes mode. | |
685 " | |
686 (interactive "P") | |
29204
d38a98cddcec
(highlight-changes-mode): Ask about color or
Eli Zaretskii <eliz@gnu.org>
parents:
25533
diff
changeset
|
687 (if (or (display-color-p) |
d38a98cddcec
(highlight-changes-mode): Ask about color or
Eli Zaretskii <eliz@gnu.org>
parents:
25533
diff
changeset
|
688 (and (fboundp 'x-display-grayscale-p) (x-display-grayscale-p))) |
22957 | 689 (let ((was-on highlight-changes-mode) |
690 (new-highlight-changes-mode | |
691 (cond | |
692 ((null arg) | |
693 ;; no arg => toggle (or set to active initially) | |
694 (if highlight-changes-mode | |
695 (if (eq highlight-changes-mode 'active) 'passive 'active) | |
696 highlight-changes-initial-state)) | |
697 ;; an argument is given | |
698 ((eq arg 'active) | |
699 'active) | |
700 ((eq arg 'passive) | |
701 'passive) | |
702 ((> (prefix-numeric-value arg) 0) | |
703 'active) | |
704 ((< (prefix-numeric-value arg) 0) | |
705 nil) | |
706 (t | |
707 'passive) | |
708 ))) | |
709 (if new-highlight-changes-mode | |
710 ;; mode is turned on -- but may be passive | |
711 (progn | |
712 (hilit-chg-set new-highlight-changes-mode) | |
713 (or was-on | |
714 ;; run highlight-changes-enable-hook once | |
715 (run-hooks 'highlight-changes-enable-hook)) | |
716 (run-hooks 'highlight-changes-toggle-hook)) | |
717 ;; mode is turned off | |
718 (run-hooks 'highlight-changes-disable-hook) | |
719 (hilit-chg-clear)) | |
720 ) | |
29204
d38a98cddcec
(highlight-changes-mode): Ask about color or
Eli Zaretskii <eliz@gnu.org>
parents:
25533
diff
changeset
|
721 (message "Highlight Changes mode requires color or grayscale display")) |
22957 | 722 ) |
723 | |
724 | |
725 | |
726 ;;;###autoload | |
727 (defun highlight-changes-next-change () | |
728 "Move to the beginning of the next change, if in Highlight Changes mode." | |
729 (interactive) | |
730 (if highlight-changes-mode | |
731 (let ((start (point)) | |
732 prop) | |
733 (setq prop (get-text-property (point) 'hilit-chg)) | |
734 (if prop | |
735 ;; we are in a change | |
736 (setq start (next-single-property-change (point) 'hilit-chg))) | |
737 (if start | |
738 (setq start (next-single-property-change start 'hilit-chg))) | |
739 (if start | |
740 (goto-char start) | |
741 (message "no next change"))) | |
742 (message "This buffer is not in Highlight Changes mode."))) | |
743 | |
744 | |
745 ;;;###autoload | |
746 (defun highlight-changes-previous-change () | |
747 "Move to the beginning of the previous change, if in Highlight Changes mode." | |
748 (interactive) | |
749 (if highlight-changes-mode | |
750 (let ( (start (point)) (prop nil) ) | |
751 (or (bobp) | |
752 (setq prop (get-text-property (1- (point)) 'hilit-chg))) | |
753 (if prop | |
754 ;; we are in a change | |
755 (setq start (previous-single-property-change (point) 'hilit-chg))) | |
756 (if start | |
757 (setq start (previous-single-property-change start 'hilit-chg))) | |
758 ;; special handling for the case where (point-min) is a change | |
759 (if start | |
760 (setq start (or (previous-single-property-change start 'hilit-chg) | |
761 (if (get-text-property (point-min) 'hilit-chg) | |
762 (point-min))))) | |
763 (if start | |
764 (goto-char start) | |
765 (message "no previous change"))) | |
766 (message "This buffer is not in Highlight Changes mode."))) | |
767 | |
768 | |
769 ;; ======================================================================== | |
770 | |
771 | |
772 (defun hilit-chg-make-list (&optional force) | |
773 "Construct hilit-chg-list and highlight-changes-face-list." | |
774 ;; Constructs highlight-changes-face-list if necessary, | |
775 ;; and hilit-chg-list always: | |
776 ;; Maybe this should always be called when rotating a face | |
777 ;; so we pick up any changes? | |
778 (if (or (null highlight-changes-face-list) ; Don't do it if it | |
779 force) ; already exists unless FORCE non-nil. | |
780 (let ((p highlight-changes-colours) | |
781 (n 1) name) | |
782 (setq highlight-changes-face-list nil) | |
783 (while p | |
784 (setq name (intern (format "highlight-changes-face-%d" n))) | |
785 (copy-face 'highlight-changes-face name) | |
786 (set-face-foreground name (car p)) | |
787 (setq highlight-changes-face-list | |
788 (append highlight-changes-face-list (list name))) | |
789 (setq p (cdr p)) | |
790 (setq n (1+ n))))) | |
791 (setq hilit-chg-list (list 'hilit-chg 'highlight-changes-face)) | |
792 (let ((p highlight-changes-face-list) | |
793 (n 1) | |
794 last-category last-face) | |
795 (while p | |
796 (setq last-category (intern (format "change-%d" n))) | |
797 ;; (setq last-face (intern (format "highlight-changes-face-%d" n))) | |
798 (setq last-face (car p)) | |
799 (setq hilit-chg-list | |
800 (append hilit-chg-list | |
801 (list last-category last-face))) | |
802 (setq p (cdr p)) | |
803 (setq n (1+ n))) | |
804 (setq hilit-chg-list | |
805 (append hilit-chg-list | |
806 (list last-category last-face))) | |
807 )) | |
808 | |
809 | |
810 (defun hilit-chg-bump-change (prop start end) | |
811 "Increment (age) the Highlight Changes mode text property of type change." | |
812 (let ( new-prop ) | |
813 (if (eq prop 'hilit-chg-delete) | |
814 (setq new-prop (nth 2 hilit-chg-list)) | |
815 (setq new-prop (nth 2 (member prop hilit-chg-list))) | |
816 ) | |
817 (if prop | |
818 (put-text-property start end 'hilit-chg new-prop) | |
819 (message "%d-%d unknown property %s not changed" start end prop) | |
820 ) | |
821 )) | |
822 | |
823 ;;;###autoload | |
824 (defun highlight-changes-rotate-faces () | |
825 "Rotate the faces used by Highlight Changes mode. | |
826 | |
827 Current changes will be display in the face described by the first element | |
828 of highlight-changes-face-list, those (older) changes will be shown in the | |
829 face described by the second element, and so on. Very old changes remain | |
830 shown in the last face in the list. | |
831 | |
832 You can automatically rotate colours when the buffer is saved | |
833 by adding this to local-write-file-hooks, by evaling (in the | |
834 buffer to be saved): | |
835 (add-hook 'local-write-file-hooks 'highlight-changes-rotate-faces) | |
836 " | |
837 (interactive) | |
838 ;; If not in active mode do nothing but don't complain because this | |
839 ;; may be bound to a hook. | |
840 (if (eq highlight-changes-mode 'active) | |
841 (let ((after-change-functions nil)) | |
842 ;; ensure hilit-chg-list is made and up to date | |
843 (hilit-chg-make-list) | |
844 ;; remove our existing overlays | |
845 (hilit-chg-hide-changes) | |
846 ;; for each change text property, increment it | |
847 (hilit-chg-map-changes 'hilit-chg-bump-change) | |
848 ;; and display them all if active | |
849 (if (eq highlight-changes-mode 'active) | |
850 (hilit-chg-display-changes)) | |
851 )) | |
852 ;; This always returns nil so it is safe to use in | |
853 ;; local-write-file-hook | |
854 nil) | |
855 | |
856 | |
857 ;; ======================================================================== | |
858 ;; Comparing with an existing file. | |
859 ;; This uses ediff to find the differences. | |
860 | |
861 ;;;###autoload | |
23288
17dd9ecf84f1
(highlight-compare-with-file): Renamed from
Karl Heuer <kwzh@gnu.org>
parents:
23101
diff
changeset
|
862 (defun highlight-compare-with-file (file-b) |
17dd9ecf84f1
(highlight-compare-with-file): Renamed from
Karl Heuer <kwzh@gnu.org>
parents:
23101
diff
changeset
|
863 "Compare this buffer with a file, and highlight differences. |
22957 | 864 |
865 The current buffer must be an unmodified buffer visiting a file, | |
866 and not in read-only mode. | |
867 | |
868 If the backup filename exists, it is used as the default | |
869 when called interactively. | |
870 | |
871 If a buffer is visiting the file being compared against, it also will | |
872 have its differences highlighted. Otherwise, the file is read in | |
873 temporarily but the buffer is deleted. | |
874 | |
875 If a buffer is read-only, differences will be highlighted but no property | |
876 changes made, so \\[highlight-changes-next-change] and | |
877 \\[highlight-changes-previous-change] will not work." | |
878 (interactive (list | |
879 (read-file-name | |
880 "File to compare with? " ;; prompt | |
881 "" ;; directory | |
882 nil ;; default | |
883 'yes ;; must exist | |
884 (let ((f (make-backup-file-name | |
885 (or (buffer-file-name (current-buffer)) | |
886 (error "no file for this buffer"))))) | |
887 (if (file-exists-p f) f "")) | |
888 ))) | |
889 | |
890 (let* ((buf-a (current-buffer)) | |
891 (buf-a-read-only buffer-read-only) | |
892 (orig-pos (point)) | |
893 (file-a (buffer-file-name)) | |
894 (existing-buf (get-file-buffer file-b)) | |
895 (buf-b (or existing-buf | |
896 (find-file-noselect file-b))) | |
897 (buf-b-read-only (with-current-buffer buf-b buffer-read-only)) | |
898 xy xx yy p q | |
899 a-start a-end len-a | |
900 b-start b-end len-b | |
901 ) | |
902 | |
903 ;; We use the fact that the buffer is not marked modified at the | |
904 ;; end where we clear its modified status | |
905 (if (buffer-modified-p buf-a) | |
906 (if (y-or-n-p (format "OK to save %s? " file-a)) | |
907 (save-buffer buf-a) | |
908 (error "Buffer must be saved before comparing with a file."))) | |
909 (if (and existing-buf (buffer-modified-p buf-b)) | |
910 (if (y-or-n-p (format "OK to save %s? " file-b)) | |
911 (save-buffer buf-b) | |
912 (error "Cannot compare with a file in an unsaved buffer."))) | |
913 (highlight-changes-mode 'active) | |
914 (if existing-buf (with-current-buffer buf-b | |
915 (highlight-changes-mode 'active))) | |
916 (save-window-excursion | |
917 (setq xy (hilit-chg-get-diff-info buf-a file-a buf-b file-b))) | |
918 (setq xx (car xy)) | |
919 (setq p xx) | |
920 (setq yy (car (cdr xy))) | |
921 (setq q yy) | |
922 (hilit-chg-make-list) | |
923 (while p | |
924 (setq a-start (nth 0 (car p))) | |
925 (setq a-end (nth 1 (car p))) | |
926 (setq b-start (nth 0 (car q))) | |
927 (setq b-end (nth 1 (car q))) | |
928 (setq len-a (- a-end a-start)) | |
929 (setq len-b (- b-end b-start)) | |
930 (set-buffer buf-a) | |
931 (hilit-chg-set-face-on-change a-start a-end len-b buf-a-read-only) | |
932 (set-buffer-modified-p nil) | |
933 (goto-char orig-pos) | |
934 (if existing-buf | |
935 (with-current-buffer buf-b | |
936 (hilit-chg-set-face-on-change b-start b-end len-a | |
937 buf-b-read-only ) | |
938 )) | |
939 (setq p (cdr p)) | |
940 (setq q (cdr q)) | |
941 ) | |
942 (if existing-buf | |
943 (set-buffer-modified-p nil) | |
944 (kill-buffer buf-b)) | |
945 )) | |
946 | |
947 | |
948 (defun hilit-chg-get-diff-info (buf-a file-a buf-b file-b) | |
949 (let ((e nil) x y) ;; e is set by function hilit-chg-get-diff-list-hk | |
950 (ediff-setup buf-a file-a buf-b file-b | |
951 nil nil ; buf-c file-C | |
952 'hilit-chg-get-diff-list-hk | |
953 (list (cons 'ediff-job-name 'something)) | |
954 ) | |
955 (ediff-with-current-buffer e (ediff-really-quit nil)) | |
956 (list x y))) | |
957 | |
958 | |
959 (defun hilit-chg-get-diff-list-hk () | |
960 ;; x and y are dynamically bound by hilit-chg-get-diff-info | |
961 ;; which calls this function as a hook | |
962 (defvar x) ;; placate the byte-compiler | |
963 (defvar y) | |
964 (setq e (current-buffer)) | |
965 (let ((n 0) extent p va vb a b) | |
966 (setq x nil y nil) ;; x and y are bound by hilit-chg-get-diff-info | |
967 (while (< n ediff-number-of-differences) | |
968 (ediff-make-fine-diffs n) | |
969 (setq va (ediff-get-fine-diff-vector n 'A)) | |
970 ;; va is a vector if there are fine differences | |
971 (if va | |
972 (setq a (append va nil)) | |
973 ;; if not, get the unrefined difference | |
974 (setq va (ediff-get-difference n 'A)) | |
975 (setq a (list (elt va 0))) | |
976 ) | |
977 ;; a list a list | |
978 (setq p a) | |
979 (while p | |
980 (setq extent (list (overlay-start (car p)) | |
981 (overlay-end (car p)))) | |
982 (setq p (cdr p)) | |
983 (setq x (append x (list extent) )) | |
984 );; while p | |
985 ;; | |
986 (setq vb (ediff-get-fine-diff-vector n 'B)) | |
987 ;; vb is a vector | |
988 (if vb | |
989 (setq b (append vb nil)) | |
990 ;; if not, get the unrefined difference | |
991 (setq vb (ediff-get-difference n 'B)) | |
992 (setq b (list (elt vb 0))) | |
993 ) | |
994 ;; b list a list | |
995 (setq p b) | |
996 (while p | |
997 (setq extent (list (overlay-start (car p)) | |
998 (overlay-end (car p)))) | |
999 (setq p (cdr p)) | |
1000 (setq y (append y (list extent) )) | |
1001 );; while p | |
1002 ;; | |
1003 (setq n (1+ n)) | |
1004 );; while | |
1005 ;; ediff-quit doesn't work here. | |
1006 ;; No point in returning a value, since this is a hook function. | |
1007 )) | |
1008 | |
1009 ;; ======================= automatic stuff ============== | |
1010 | |
1011 ;; Global Highlight Changes mode is modelled after Global Font-lock mode. | |
1012 ;; Three hooks are used to gain control. When Global Changes Mode is | |
1013 ;; enabled, `find-file-hooks' and `change-major-mode-hook' are set. | |
1014 ;; `find-file-hooks' is called when visiting a file, the new mode is | |
1015 ;; known at this time. | |
1016 ;; `change-major-mode-hook' is called when a buffer is changing mode. | |
1017 ;; This could be because of finding a file in which case | |
1018 ;; `find-file-hooks' has already been called and has done its work. | |
1019 ;; However, it also catches the case where a new mode is being set by | |
1020 ;; the user. However, it is called from `kill-all-variables' and at | |
1021 ;; this time the mode is the old mode, which is not what we want. | |
1022 ;; So, our function temporarily sets `post-command-hook' which will | |
1023 ;; be called after the buffer has been completely set up (with the new | |
1024 ;; mode). It then removes the `post-command-hook'. | |
1025 ;; One other wrinkle - every M-x command runs the `change-major-mode-hook' | |
1026 ;; so we ignore this by examining the buffer name. | |
1027 | |
1028 | |
1029 (defun hilit-chg-major-mode-hook () | |
1030 (add-hook 'post-command-hook 'hilit-chg-post-command-hook) | |
1031 ) | |
1032 | |
1033 (defun hilit-chg-post-command-hook () | |
1034 ;; This is called after changing a major mode, but also after each | |
1035 ;; M-x command, in which case the current buffer is a minibuffer. | |
1036 ;; In that case, do not act on it here, but don't turn it off | |
1037 ;; either, we will get called here again soon-after. | |
1038 ;; Also, don't enable it for other special buffers. | |
1039 (if (string-match "^[ *]" (buffer-name)) | |
1040 nil ;; (message "ignoring this post-command-hook") | |
1041 (remove-hook 'post-command-hook 'hilit-chg-post-command-hook) | |
1042 ;; The following check isn't necessary, since | |
1043 ;; hilit-chg-turn-on-maybe makes this check too. | |
1044 (or highlight-changes-mode ;; don't turn it on if it already is | |
1045 (hilit-chg-turn-on-maybe highlight-changes-global-initial-state)) | |
1046 )) | |
1047 | |
1048 (defun hilit-chg-check-global () | |
1049 ;; This is called from the find file hook. | |
1050 (hilit-chg-turn-on-maybe highlight-changes-global-initial-state)) | |
1051 | |
1052 | |
1053 | |
1054 ;;;###autoload | |
1055 (defun global-highlight-changes (&optional arg) | |
1056 "Turn on or off global Highlight Changes mode. | |
1057 | |
1058 When called interactively: | |
1059 - if no prefix, toggle global Highlight Changes mode on or off | |
1060 - if called with a positive prefix (or just C-u) turn it on in active mode | |
1061 - if called with a zero prefix turn it on in passive mode | |
1062 - if called with a negative prefix turn it off | |
1063 | |
1064 When called from a program: | |
1065 - if ARG is nil or omitted, turn it off | |
1066 - if ARG is 'active, turn it on in active mode | |
1067 - if ARG is 'passive, turn it on in passive mode | |
1068 - otherwise just turn it on | |
1069 | |
1070 When global Highlight Changes mode is enabled, Highlight Changes mode is turned | |
1071 on for future \"suitable\" buffers (and for \"suitable\" existing buffers if | |
1072 variable `highlight-changes-global-changes-existing-buffers' is non-nil). | |
1073 \"Suitablity\" is determined by variable `highlight-changes-global-modes'." | |
1074 | |
1075 (interactive | |
1076 (list | |
1077 (cond | |
1078 ((null current-prefix-arg) | |
1079 ;; no arg => toggle it on/off | |
1080 (setq global-highlight-changes (not global-highlight-changes))) | |
1081 ;; positive interactive arg - turn it on as active | |
1082 ((> (prefix-numeric-value current-prefix-arg) 0) | |
1083 (setq global-highlight-changes t) | |
1084 'active) | |
1085 ;; zero interactive arg - turn it on as passive | |
1086 ((= (prefix-numeric-value current-prefix-arg) 0) | |
1087 (setq global-highlight-changes t) | |
1088 'passive) | |
1089 ;; negative interactive arg - turn it off | |
1090 (t | |
1091 (setq global-highlight-changes nil) | |
1092 nil)))) | |
1093 | |
1094 (if arg | |
1095 (progn | |
1096 (if (eq arg 'active) | |
1097 (setq highlight-changes-global-initial-state 'active) | |
1098 (if (eq arg 'passive) | |
1099 (setq highlight-changes-global-initial-state 'passive))) | |
1100 (setq global-highlight-changes t) | |
1101 (message "turning ON Global Highlight Changes mode in %s state" | |
1102 highlight-changes-global-initial-state) | |
1103 (add-hook 'hilit-chg-major-mode-hook 'hilit-chg-major-mode-hook) | |
1104 (add-hook 'find-file-hooks 'hilit-chg-check-global) | |
1105 (if highlight-changes-global-changes-existing-buffers | |
1106 (hilit-chg-update-all-buffers | |
1107 highlight-changes-global-initial-state)) | |
1108 ) | |
1109 (message "turning OFF global Highlight Changes mode") | |
1110 (remove-hook 'hilit-chg-major-mode-hook 'hilit-chg-major-mode-hook) | |
1111 (remove-hook 'find-file-hooks 'hilit-chg-check-global) | |
1112 (remove-hook 'post-command-hook | |
1113 'hilit-chg-post-command-hook) | |
1114 (remove-hook 'find-file-hooks 'hilit-chg-check-global) | |
1115 (if highlight-changes-global-changes-existing-buffers | |
1116 (hilit-chg-update-all-buffers nil)) | |
1117 ) | |
1118 ) | |
1119 | |
1120 | |
1121 | |
1122 | |
1123 | |
1124 (defun hilit-chg-turn-on-maybe (value) | |
1125 "Turn on Highlight Changes mode if it is appropriate for this buffer. | |
1126 | |
1127 A buffer is appropriate for Highlight Changes mode if all these are true: | |
1128 - the buffer is not a special buffer (one whose name begins with | |
1129 `*' or ` ') | |
1130 - the buffer's mode is suitable as per variable highlight-changes-global-modes | |
1131 - Highlight Changes mode is not already on for this buffer. | |
1132 | |
1133 This function is called from hilit-chg-update-all-buffers | |
1134 from `global-highlight-changes' when turning on global Highlight Changes mode. | |
1135 " | |
1136 (or highlight-changes-mode ; do nothing if already on | |
1137 (if | |
1138 (cond | |
1139 ((null highlight-changes-global-modes) | |
1140 nil) | |
1141 ((functionp highlight-changes-global-modes) | |
1142 (funcall highlight-changes-global-modes)) | |
1143 ((listp highlight-changes-global-modes) | |
1144 (if (eq (car-safe highlight-changes-global-modes) 'not) | |
1145 (not (memq major-mode (cdr highlight-changes-global-modes))) | |
1146 (memq major-mode highlight-changes-global-modes))) | |
1147 (t | |
1148 (and | |
1149 (not (string-match "^[ *]" (buffer-name))) | |
1150 (buffer-file-name)) | |
1151 )) | |
1152 (progn | |
1153 (hilit-chg-set value) | |
1154 (run-hooks 'highlight-changes-enable-hook))) | |
1155 )) | |
1156 | |
1157 | |
1158 (defun hilit-chg-turn-off-maybe () | |
1159 (if highlight-changes-mode | |
1160 (progn | |
1161 (run-hooks 'highlight-changes-disable-hook) | |
1162 (hilit-chg-clear)))) | |
1163 | |
1164 | |
1165 | |
1166 (defun hilit-chg-update-all-buffers (value) | |
1167 (mapcar | |
1168 (function (lambda (buffer) | |
1169 (with-current-buffer buffer | |
1170 (if value | |
1171 (hilit-chg-turn-on-maybe value) | |
1172 (hilit-chg-turn-off-maybe)) | |
1173 ))) | |
1174 (buffer-list))) | |
1175 | |
1176 ;; ===================== debug ================== | |
1177 ;; For debug & test use: | |
1178 ;; | |
1179 ;; (defun hilit-chg-debug-show (&optional beg end) | |
1180 ;; (interactive) | |
1181 ;; (message "--- hilit-chg-debug-show ---") | |
1182 ;; (hilit-chg-map-changes '(lambda (prop start end) | |
1183 ;; (message "%d-%d: %s" start end prop) | |
1184 ;; ) | |
1185 ;; beg end | |
1186 ;; )) | |
1187 ;; | |
1188 ;; ================== end of debug =============== | |
1189 | |
1190 | |
1191 (provide 'hilit-chg) | |
22958
cd50dfa70bb2
Delete the undo-in-progress compatibility code.
Richard M. Stallman <rms@gnu.org>
parents:
22957
diff
changeset
|
1192 |
22957 | 1193 ;;; hilit-chg.el ends here |