Mercurial > emacs
annotate src/sysdep.c @ 1280:5c66007ecabb
* window.c (Fset_window_configuration): Don't select the frame
just because we restored its configuration.
* window.c (Fset_window_configuration): Don't forget to set the
frame's selected window when we can't call Fselect_window.
author | Jim Blandy <jimb@redhat.com> |
---|---|
date | Wed, 30 Sep 1992 14:28:46 +0000 |
parents | bc1acd76b294 |
children | f9010847a5f5 |
rev | line source |
---|---|
491 | 1 /* Interfaces to system-dependent kernel and library entries. |
579 | 2 Copyright (C) 1985, 1986, 1987, 1988, 1992 Free Software Foundation, Inc. |
491 | 3 |
4 This file is part of GNU Emacs. | |
5 | |
6 GNU Emacs is free software; you can redistribute it and/or modify | |
7 it under the terms of the GNU General Public License as published by | |
8 the Free Software Foundation; either version 1, or (at your option) | |
9 any later version. | |
10 | |
11 GNU Emacs is distributed in the hope that it will be useful, | |
12 but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 GNU General Public License for more details. | |
15 | |
16 You should have received a copy of the GNU General Public License | |
17 along with GNU Emacs; see the file COPYING. If not, write to | |
18 the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ | |
19 | |
20 | |
21 #include <signal.h> | |
22 #include <setjmp.h> | |
23 | |
24 #include "config.h" | |
25 #include "lisp.h" | |
26 #undef NULL | |
27 | |
28 #define min(x,y) ((x) > (y) ? (y) : (x)) | |
29 | |
30 /* In this file, open, read and write refer to the system calls, | |
31 not our sugared interfaces sys_open, sys_read and sys_write. | |
32 Contrariwise, for systems where we use the system calls directly, | |
33 define sys_read, etc. here as aliases for them. */ | |
34 #ifndef read | |
35 #define sys_read read | |
36 #define sys_write write | |
37 #endif /* `read' is not a macro */ | |
38 | |
39 #undef read | |
40 #undef write | |
41 | |
42 #ifndef close | |
43 #define sys_close close | |
44 #else | |
45 #undef close | |
46 #endif | |
47 | |
48 #ifndef open | |
49 #define sys_open open | |
50 #else /* `open' is a macro */ | |
51 #undef open | |
52 #endif /* `open' is a macro */ | |
53 | |
54 #include <stdio.h> | |
55 #include <sys/types.h> | |
56 #include <sys/stat.h> | |
57 #include <errno.h> | |
58 | |
59 extern int errno; | |
60 #ifndef VMS | |
61 extern char *sys_errlist[]; | |
62 #endif | |
63 | |
64 #ifdef VMS | |
65 #include <rms.h> | |
66 #include <ttdef.h> | |
67 #include <tt2def.h> | |
68 #include <iodef.h> | |
69 #include <ssdef.h> | |
70 #include <descrip.h> | |
71 #include <fibdef.h> | |
72 #include <atrdef.h> | |
73 #include <ctype.h> | |
74 #include <string.h> | |
75 #ifdef __GNUC__ | |
76 #include <sys/file.h> | |
77 #else | |
78 #include <file.h> | |
79 #endif | |
80 #undef F_SETFL | |
81 #ifndef RAB$C_BID | |
82 #include <rab.h> | |
83 #endif | |
84 #define MAXIOSIZE ( 32 * PAGESIZE ) /* Don't I/O more than 32 blocks at a time */ | |
85 #endif /* VMS */ | |
86 | |
87 #ifndef BSD4_1 | |
88 #ifdef BSD /* this is done this way to avoid defined (BSD) || defined (USG) | |
89 because the vms compiler doesn't grok `defined' */ | |
90 #include <fcntl.h> | |
91 #endif | |
92 #ifdef USG | |
1014
6e25f9b75841
* sysdep.c (select): There's no need to cast the return value of
Jim Blandy <jimb@redhat.com>
parents:
766
diff
changeset
|
93 #ifndef USG5 |
491 | 94 #include <fcntl.h> |
95 #endif | |
1014
6e25f9b75841
* sysdep.c (select): There's no need to cast the return value of
Jim Blandy <jimb@redhat.com>
parents:
766
diff
changeset
|
96 #endif |
491 | 97 #endif /* not 4.1 bsd */ |
98 | |
99 /* Get DGUX definition for FASYNC - DJB */ | |
100 #ifdef DGUX | |
101 #include <sys/file.h> | |
102 #endif /* DGUX */ | |
103 | |
104 #include <sys/ioctl.h> | |
1048
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
105 #include "systty.h" |
491 | 106 |
107 #ifdef BSD | |
108 #ifdef BSD4_1 | |
109 #include <wait.h> | |
110 #else /* not 4.1 */ | |
111 #include <sys/wait.h> | |
112 #endif /* not 4.1 */ | |
113 #endif /* BSD */ | |
114 | |
115 #ifdef BROKEN_TIOCGWINSZ | |
116 #undef TIOCGWINSZ | |
117 #endif | |
118 | |
119 #ifdef USG | |
120 #include <sys/utsname.h> | |
121 #include <string.h> | |
122 #ifndef MEMORY_IN_STRING_H | |
123 #include <memory.h> | |
124 #endif | |
125 #ifdef TIOCGWINSZ | |
126 #ifdef NEED_SIOCTL | |
127 #include <sys/sioctl.h> | |
128 #endif | |
129 #ifdef NEED_PTEM_H | |
130 #include <sys/stream.h> | |
131 #include <sys/ptem.h> | |
132 #endif | |
133 #endif /* TIOCGWINSZ */ | |
134 #endif /* USG */ | |
135 | |
136 extern int quit_char; | |
137 | |
766 | 138 #include "frame.h" |
491 | 139 #include "window.h" |
140 #include "termhooks.h" | |
141 #include "termchar.h" | |
142 #include "termopts.h" | |
143 #include "dispextern.h" | |
144 #include "process.h" | |
145 | |
146 #ifdef NONSYSTEM_DIR_LIBRARY | |
147 #include "ndir.h" | |
148 #endif /* NONSYSTEM_DIR_LIBRARY */ | |
149 | |
579 | 150 #include "syssignal.h" |
151 #include "systime.h" | |
491 | 152 |
153 static int baud_convert[] = | |
154 #ifdef BAUD_CONVERT | |
155 BAUD_CONVERT; | |
156 #else | |
157 { | |
158 0, 50, 75, 110, 135, 150, 200, 300, 600, 1200, | |
159 1800, 2400, 4800, 9600, 19200, 38400 | |
160 }; | |
161 #endif | |
162 | |
163 extern short ospeed; | |
164 | |
579 | 165 /* The file descriptor for Emacs's input terminal. |
166 Under Unix, this is always left zero; | |
167 under VMS, we place the input channel number here. | |
168 This allows us to write more code that works for both VMS and Unix. */ | |
169 static int input_fd; | |
170 | |
491 | 171 #ifdef VMS |
172 static struct iosb | |
173 { | |
174 short status; | |
175 short offset; | |
176 short termlen; | |
177 short term; | |
178 } input_iosb; | |
179 | |
180 int kbd_input_ast (); | |
181 | |
182 int waiting_for_ast; | |
183 int stop_input; | |
184 int input_ef = 0; | |
185 int timer_ef = 0; | |
186 int process_ef = 0; | |
187 int input_eflist; | |
188 int timer_eflist; | |
189 | |
190 static $DESCRIPTOR (input_dsc, "TT"); | |
191 static int terminator_mask[2] = { 0, 0 }; | |
192 | |
193 static struct sensemode { | |
194 short status; | |
195 unsigned char xmit_baud; | |
196 unsigned char rcv_baud; | |
197 unsigned char crfill; | |
198 unsigned char lffill; | |
199 unsigned char parity; | |
200 unsigned char unused; | |
201 char class; | |
202 char type; | |
203 short scr_wid; | |
204 unsigned long tt_char : 24, scr_len : 8; | |
205 unsigned long tt2_char; | |
206 } sensemode_iosb; | |
207 #endif /* VMS */ | |
208 | |
209 discard_tty_input () | |
210 { | |
579 | 211 struct emacs_tty buf; |
491 | 212 |
213 if (noninteractive) | |
214 return; | |
215 | |
216 /* Discarding input is not safe when the input could contain | |
217 replies from the X server. So don't do it. */ | |
218 if (read_socket_hook) | |
219 return; | |
220 | |
221 #ifdef VMS | |
222 end_kbd_input (); | |
579 | 223 SYS$QIOW (0, input_fd, IO$_READVBLK|IO$M_PURGE, input_iosb, 0, 0, |
224 &buf.main, 0, 0, terminator_mask, 0, 0); | |
491 | 225 queue_kbd_input (); |
226 #else /* not VMS */ | |
227 #ifdef APOLLO | |
228 { | |
229 int zero = 0; | |
230 ioctl (0, TIOCFLUSH, &zero); | |
231 } | |
232 #else /* not Apollo */ | |
579 | 233 EMACS_GET_TTY (input_fd, &buf); |
234 EMACS_SET_TTY (input_fd, &buf, 0); | |
491 | 235 #endif /* not Apollo */ |
236 #endif /* not VMS */ | |
237 } | |
238 | |
239 #ifdef SIGTSTP | |
240 | |
241 stuff_char (c) | |
242 char c; | |
243 { | |
244 /* Should perhaps error if in batch mode */ | |
245 #ifdef TIOCSTI | |
246 ioctl (0, TIOCSTI, &c); | |
247 #else /* no TIOCSTI */ | |
248 error ("Cannot stuff terminal input characters in this version of Unix."); | |
249 #endif /* no TIOCSTI */ | |
250 } | |
251 | |
252 #endif /* SIGTSTP */ | |
253 | |
254 init_baud_rate () | |
255 { | |
256 if (noninteractive) | |
257 ospeed = 0; | |
258 else | |
259 { | |
260 #ifdef VMS | |
579 | 261 struct sensemode sg; |
262 | |
263 SYS$QIOW (0, input_fd, IO$_SENSEMODE, &sg, 0, 0, | |
491 | 264 &sg.class, 12, 0, 0, 0, 0 ); |
579 | 265 ospeed = sg.xmit_baud; |
266 #else /* not VMS */ | |
267 #ifdef HAVE_TERMIOS | |
268 struct termios sg; | |
269 | |
270 sg.c_cflag = (sg.c_cflag & ~CBAUD) | B9600; | |
271 tcgetattr (0, &sg); | |
272 ospeed = sg.c_cflag & CBAUD; | |
1048
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
273 #else /* neither VMS nor TERMIOS */ |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
274 #ifdef HAVE_TERMIO |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
275 struct termio sg; |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
276 |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
277 sg.c_cflag = (sg.c_cflag & ~CBAUD) | B9600; |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
278 #ifdef HAVE_TCATTR |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
279 tcgetattr (0, &sg); |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
280 #else |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
281 ioctl (fd, TIOCGETP, &sg); |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
282 #endif |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
283 ospeed = sg.c_cflag & CBAUD; |
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
284 #else /* neither VMS nor TERMIOS nor TERMIO */ |
579 | 285 struct sgttyb sg; |
286 | |
287 sg.sg_ospeed = B9600; | |
288 ioctl (0, TIOCGETP, &sg); | |
289 ospeed = sg.sg_ospeed; | |
1048
9899cb2199af
* sysdep.c (init_baud_rate): Re-arranged order of conditionals -
Jim Blandy <jimb@redhat.com>
parents:
1014
diff
changeset
|
290 #endif /* not HAVE_TERMIO */ |
579 | 291 #endif /* not HAVE_TERMIOS */ |
491 | 292 #endif /* not VMS */ |
293 } | |
294 | |
295 baud_rate = (ospeed < sizeof baud_convert / sizeof baud_convert[0] | |
296 ? baud_convert[ospeed] : 9600); | |
297 if (baud_rate == 0) | |
298 baud_rate = 1200; | |
299 } | |
300 | |
301 /*ARGSUSED*/ | |
302 set_exclusive_use (fd) | |
303 int fd; | |
304 { | |
305 #ifdef FIOCLEX | |
306 ioctl (fd, FIOCLEX, 0); | |
307 #endif | |
308 /* Ok to do nothing if this feature does not exist */ | |
309 } | |
310 | |
311 #ifndef subprocesses | |
312 | |
313 wait_without_blocking () | |
314 { | |
315 #ifdef BSD | |
316 wait3 (0, WNOHANG | WUNTRACED, 0); | |
317 #else | |
318 croak ("wait_without_blocking"); | |
319 #endif | |
320 synch_process_alive = 0; | |
321 } | |
322 | |
323 #endif /* not subprocesses */ | |
324 | |
325 int wait_debugging; /* Set nonzero to make following function work under dbx | |
326 (at least for bsd). */ | |
327 | |
328 SIGTYPE | |
329 wait_for_termination_signal () | |
330 {} | |
331 | |
332 /* Wait for subprocess with process id `pid' to terminate and | |
333 make sure it will get eliminated (not remain forever as a zombie) */ | |
334 | |
335 wait_for_termination (pid) | |
336 int pid; | |
337 { | |
338 while (1) | |
339 { | |
340 #ifdef subprocesses | |
341 #ifdef VMS | |
342 int status; | |
343 | |
344 status = sys$forcex (&pid, 0, 0); | |
345 break; | |
346 #else /* not VMS */ | |
347 | |
348 /* Exit if the process has terminated. */ | |
349 if (!synch_process_alive) | |
350 break; | |
351 /* Otherwise wait 1 second or until a signal comes in. */ | |
352 signal (SIGALRM, wait_for_termination_signal); | |
353 alarm (1); | |
354 pause (); | |
355 alarm (0); | |
356 signal (SIGALRM, SIG_IGN); | |
357 #endif /* not VMS */ | |
358 #else /* not subprocesses */ | |
359 #ifndef BSD4_1 | |
360 if (kill (pid, 0) < 0) | |
361 break; | |
362 wait (0); | |
363 #else /* BSD4_1 */ | |
364 int status; | |
365 status = wait (0); | |
366 if (status == pid || status == -1) | |
367 break; | |
368 #endif /* BSD4_1 */ | |
369 #endif /* not subprocesses */ | |
370 } | |
371 } | |
372 | |
373 #ifdef subprocesses | |
374 | |
375 /* | |
376 * flush any pending output | |
377 * (may flush input as well; it does not matter the way we use it) | |
378 */ | |
379 | |
380 flush_pending_output (channel) | |
381 int channel; | |
382 { | |
383 #ifdef HAVE_TERMIOS | |
384 /* If we try this, we get hit with SIGTTIN, because | |
385 the child's tty belongs to the child's pgrp. */ | |
386 #else | |
387 #ifdef TCFLSH | |
388 ioctl (channel, TCFLSH, 1); | |
389 #else | |
390 #ifdef TIOCFLUSH | |
391 int zero = 0; | |
392 /* 3rd arg should be ignored | |
393 but some 4.2 kernels actually want the address of an int | |
394 and nonzero means something different. */ | |
395 ioctl (channel, TIOCFLUSH, &zero); | |
396 #endif | |
397 #endif | |
398 #endif | |
399 } | |
400 | |
401 #ifndef VMS | |
402 /* Set up the terminal at the other end of a pseudo-terminal that | |
403 we will be controlling an inferior through. | |
404 It should not echo or do line-editing, since that is done | |
405 in Emacs. No padding needed for insertion into an Emacs buffer. */ | |
406 | |
407 child_setup_tty (out) | |
408 int out; | |
409 { | |
579 | 410 struct emacs_tty s; |
411 | |
412 EMACS_GET_TTY (out, &s); | |
413 | |
491 | 414 #ifdef HAVE_TERMIO |
579 | 415 s.main.c_oflag |= OPOST; /* Enable output postprocessing */ |
416 s.main.c_oflag &= ~ONLCR; /* Disable map of NL to CR-NL on output */ | |
417 s.main.c_oflag &= ~(NLDLY|CRDLY|TABDLY|BSDLY|VTDLY|FFDLY); | |
418 /* No output delays */ | |
419 s.main.c_lflag &= ~ECHO; /* Disable echo */ | |
420 s.main.c_lflag |= ISIG; /* Enable signals */ | |
421 s.main.c_iflag &= ~IUCLC; /* Disable map of upper case to lower on | |
422 input */ | |
423 s.main.c_oflag &= ~OLCUC; /* Disable map of lower case to upper on | |
424 output */ | |
425 #if 0 | |
426 /* Said to be unnecesary: */ | |
427 s.main.c_cc[VMIN] = 1; /* minimum number of characters to accept */ | |
428 s.main.c_cc[VTIME] = 0; /* wait forever for at least 1 character */ | |
429 #endif | |
430 | |
431 s.main.c_lflag |= ICANON; /* Enable erase/kill and eof processing */ | |
432 s.main.c_cc[VEOF] = 04; /* insure that EOF is Control-D */ | |
433 s.main.c_cc[VERASE] = 0377; /* disable erase processing */ | |
434 s.main.c_cc[VKILL] = 0377; /* disable kill processing */ | |
435 | |
491 | 436 #ifdef HPUX |
579 | 437 s.main.c_cflag = (s.main.c_cflag & ~CBAUD) | B9600; /* baud rate sanity */ |
491 | 438 #endif /* HPUX */ |
579 | 439 |
491 | 440 #ifdef AIX |
441 /* AIX enhanced edit loses NULs, so disable it */ | |
442 #ifndef IBMR2AIX | |
579 | 443 s.main.c_line = 0; |
444 s.main.c_iflag &= ~ASCEDIT; | |
491 | 445 #endif |
446 /* Also, PTY overloads NUL and BREAK. | |
447 don't ignore break, but don't signal either, so it looks like NUL. */ | |
579 | 448 s.main.c_iflag &= ~IGNBRK; |
449 s.main.c_iflag &= ~BRKINT; | |
450 /* QUIT and INTR work better as signals, so disable character forms */ | |
451 s.main.c_cc[VQUIT] = 0377; | |
452 s.main.c_cc[VINTR] = 0377; | |
453 s.main.c_cc[VEOL] = 0377; | |
454 s.main.c_lflag &= ~ISIG; | |
455 s.main.c_cflag = (s.main.c_cflag & ~CBAUD) | B9600; /* baud rate sanity */ | |
491 | 456 #endif /* AIX */ |
457 | |
458 #else /* not HAVE_TERMIO */ | |
579 | 459 |
460 s.main.sg_flags &= ~(ECHO | CRMOD | ANYP | ALLDELAY | RAW | LCASE | |
461 | CBREAK | TANDEM); | |
462 s.main.sg_erase = 0377; | |
463 s.main.sg_kill = 0377; | |
464 | |
491 | 465 #endif /* not HAVE_TERMIO */ |
466 | |
579 | 467 EMACS_SET_TTY (out, &s, 0); |
491 | 468 |
469 #ifdef BSD4_1 | |
470 if (interrupt_input) | |
471 reset_sigio (); | |
472 #endif /* BSD4_1 */ | |
473 #ifdef RTU | |
474 { | |
475 int zero = 0; | |
476 ioctl (out, FIOASYNC, &zero); | |
477 } | |
478 #endif /* RTU */ | |
479 } | |
480 #endif /* not VMS */ | |
481 | |
482 #endif /* subprocesses */ | |
483 | |
484 /*ARGSUSED*/ | |
485 setpgrp_of_tty (pid) | |
486 int pid; | |
487 { | |
648 | 488 EMACS_SET_TTY_PGRP (input_fd, &pid); |
491 | 489 } |
490 | |
491 /* Record a signal code and the handler for it. */ | |
492 struct save_signal | |
493 { | |
494 int code; | |
495 SIGTYPE (*handler) (); | |
496 }; | |
497 | |
498 /* Suspend the Emacs process; give terminal to its superior. */ | |
499 | |
500 sys_suspend () | |
501 { | |
502 #ifdef VMS | |
1171
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
503 /* "Foster" parentage allows emacs to return to a subprocess that attached |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
504 to the current emacs as a cheaper than starting a whole new process. This |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
505 is set up by KEPTEDITOR.COM. */ |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
506 unsigned long parent_id, foster_parent_id; |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
507 char *fpid_string; |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
508 |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
509 fpid_string = getenv ("EMACS_PARENT_PID"); |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
510 if (fpid_string != NULL) |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
511 { |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
512 sscanf (fpid_string, "%x", &foster_parent_id); |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
513 if (foster_parent_id != 0) |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
514 parent_id = foster_parent_id; |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
515 else |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
516 parent_id = getppid (); |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
517 } |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
518 else |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
519 parent_id = getppid (); |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
520 |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
521 free (fpid_string); /* On VMS, this was malloc'd */ |
5c942f6b2d63
(sys_suspend): Read EMACS_PARENT_PID envvar for parent.
Richard M. Stallman <rms@gnu.org>
parents:
1102
diff
changeset
|
522 |
491 | 523 if (parent_id && parent_id != 0xffffffff) |
524 { | |
525 SIGTYPE (*oldsig)() = (int) signal (SIGINT, SIG_IGN); | |
526 int status = LIB$ATTACH (&parent_id) & 1; | |
527 signal (SIGINT, oldsig); | |
528 return status; | |
529 } | |
530 else | |
531 { | |
532 struct { | |
533 int l; | |
534 char *a; | |
535 } d_prompt; | |
536 d_prompt.l = sizeof ("Emacs: "); /* Our special prompt */ | |
537 d_prompt.a = "Emacs: "; /* Just a reminder */ | |
538 lib$spawn (0, 0, 0, 0, 0, 0, 0, 0, 0, 0, &d_prompt, 0); | |
539 return 1; | |
540 } | |
541 return -1; | |
542 #else | |
543 #ifdef SIGTSTP | |
544 | |
579 | 545 EMACS_KILLPG (getpgrp (0), SIGTSTP); |
491 | 546 |
547 #else /* No SIGTSTP */ | |
548 #ifdef USG_JOBCTRL /* If you don't know what this is don't mess with it */ | |
549 ptrace (0, 0, 0, 0); /* set for ptrace - caught by csh */ | |
550 kill (getpid (), SIGQUIT); | |
551 | |
552 #else /* No SIGTSTP or USG_JOBCTRL */ | |
553 | |
554 /* On a system where suspending is not implemented, | |
555 instead fork a subshell and let it talk directly to the terminal | |
556 while we wait. */ | |
557 int pid = fork (); | |
558 struct save_signal saved_handlers[5]; | |
559 | |
560 saved_handlers[0].code = SIGINT; | |
561 saved_handlers[1].code = SIGQUIT; | |
562 saved_handlers[2].code = SIGTERM; | |
563 #ifdef SIGIO | |
564 saved_handlers[3].code = SIGIO; | |
565 saved_handlers[4].code = 0; | |
566 #else | |
567 saved_handlers[3].code = 0; | |
568 #endif | |
569 | |
570 if (pid == -1) | |
571 error ("Can't spawn subshell"); | |
572 if (pid == 0) | |
573 { | |
574 char *sh; | |
575 | |
576 sh = (char *) egetenv ("SHELL"); | |
577 if (sh == 0) | |
578 sh = "sh"; | |
579 /* Use our buffer's default directory for the subshell. */ | |
580 { | |
581 Lisp_Object dir; | |
582 unsigned char *str; | |
583 int len; | |
584 | |
585 /* mentioning current_buffer->buffer would mean including buffer.h, | |
586 which somehow wedges the hp compiler. So instead... */ | |
587 | |
588 dir = intern ("default-directory"); | |
589 /* Can't use NULL */ | |
590 if (XFASTINT (Fboundp (dir)) == XFASTINT (Qnil)) | |
591 goto xyzzy; | |
592 dir = Fsymbol_value (dir); | |
593 if (XTYPE (dir) != Lisp_String) | |
594 goto xyzzy; | |
595 | |
596 str = (unsigned char *) alloca (XSTRING (dir)->size + 2); | |
597 len = XSTRING (dir)->size; | |
598 bcopy (XSTRING (dir)->data, str, len); | |
599 if (str[len - 1] != '/') str[len++] = '/'; | |
600 str[len] = 0; | |
601 chdir (str); | |
602 } | |
603 xyzzy: | |
604 #ifdef subprocesses | |
605 close_process_descs (); /* Close Emacs's pipes/ptys */ | |
606 #endif | |
1203
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
607 |
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
608 #ifdef PRIO_PROCESS |
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
609 { |
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
610 extern int emacs_priority; |
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
611 |
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
612 if (emacs_priority) |
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
613 nice (-emacs_priority); |
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
614 } |
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
615 #endif |
bc1acd76b294
* sysdep.c (sys_suspend): Don't try to use "nice (- nice (0))" to
Jim Blandy <jimb@redhat.com>
parents:
1171
diff
changeset
|
616 |
491 | 617 execlp (sh, sh, 0); |
618 write (1, "Can't execute subshell", 22); | |
619 _exit (1); | |
620 } | |
621 | |
622 save_signal_handlers (saved_handlers); | |
623 wait_for_termination (pid); | |
624 restore_signal_handlers (saved_handlers); | |
625 | |
626 #endif /* no USG_JOBCTRL */ | |
627 #endif /* no SIGTSTP */ | |
628 #endif /* not VMS */ | |
629 } | |
630 | |
631 save_signal_handlers (saved_handlers) | |
632 struct save_signal *saved_handlers; | |
633 { | |
634 while (saved_handlers->code) | |
635 { | |
692 | 636 saved_handlers->handler |
637 = (SIGTYPE (*) ()) signal (saved_handlers->code, SIG_IGN); | |
491 | 638 saved_handlers++; |
639 } | |
640 } | |
641 | |
642 restore_signal_handlers (saved_handlers) | |
643 struct save_signal *saved_handlers; | |
644 { | |
645 while (saved_handlers->code) | |
646 { | |
647 signal (saved_handlers->code, saved_handlers->handler); | |
648 saved_handlers++; | |
649 } | |
650 } | |
651 | |
652 #ifdef F_SETFL | |
653 | |
654 int old_fcntl_flags; | |
655 | |
656 init_sigio () | |
657 { | |
658 #ifdef FASYNC | |
659 old_fcntl_flags = fcntl (0, F_GETFL, 0) & ~FASYNC; | |
660 #endif | |
661 request_sigio (); | |
662 } | |
663 | |
664 reset_sigio () | |
665 { | |
666 unrequest_sigio (); | |
667 } | |
668 | |
669 #ifdef FASYNC /* F_SETFL does not imply existance of FASYNC */ | |
670 | |
671 request_sigio () | |
672 { | |
673 #ifdef SIGWINCH | |
638 | 674 sigunblock (sigmask (SIGWINCH)); |
491 | 675 #endif |
676 fcntl (0, F_SETFL, old_fcntl_flags | FASYNC); | |
677 | |
678 interrupts_deferred = 0; | |
679 } | |
680 | |
681 unrequest_sigio () | |
682 { | |
683 #ifdef SIGWINCH | |
638 | 684 sigblock (sigmask (SIGWINCH)); |
491 | 685 #endif |
686 fcntl (0, F_SETFL, old_fcntl_flags); | |
687 interrupts_deferred = 1; | |
688 } | |
689 | |
690 #else /* no FASYNC */ | |
691 #ifdef STRIDE /* Stride doesn't have FASYNC - use FIOASYNC */ | |
692 | |
693 request_sigio () | |
694 { | |
695 int on = 1; | |
696 ioctl (0, FIOASYNC, &on); | |
697 interrupts_deferred = 0; | |
698 } | |
699 | |
700 unrequest_sigio () | |
701 { | |
702 int off = 0; | |
703 | |
704 ioctl (0, FIOASYNC, &off); | |
705 interrupts_deferred = 1; | |
706 } | |
707 | |
708 #else /* not FASYNC, not STRIDE */ | |
709 | |
710 request_sigio () | |
711 { | |
712 croak ("request_sigio"); | |
713 } | |
714 | |
715 unrequest_sigio () | |
716 { | |
717 croak ("unrequest_sigio"); | |
718 } | |
719 | |
720 #endif /* STRIDE */ | |
721 #endif /* FASYNC */ | |
722 #endif /* F_SETFL */ | |
723 | |
579 | 724 /* The initial tty mode bits */ |
725 struct emacs_tty old_tty; | |
491 | 726 |
727 int term_initted; /* 1 if outer tty status has been recorded */ | |
728 | |
579 | 729 #ifdef BSD4_1 |
730 /* BSD 4.1 needs to keep track of the lmode bits in order to start | |
731 sigio. */ | |
732 int lmode; | |
733 #endif | |
734 | |
491 | 735 #ifdef F_SETOWN |
736 int old_fcntl_owner; | |
737 #endif /* F_SETOWN */ | |
738 | |
739 /* This may also be defined in stdio, | |
740 but if so, this does no harm, | |
741 and using the same name avoids wasting the other one's space. */ | |
742 | |
743 #if defined (USG) || defined (DGUX) | |
744 unsigned char _sobuf[BUFSIZ+8]; | |
745 #else | |
746 char _sobuf[BUFSIZ]; | |
747 #endif | |
748 | |
749 #ifdef TIOCGLTC | |
750 static struct ltchars new_ltchars = {-1,-1,-1,-1,-1,-1}; | |
751 #endif | |
752 #ifdef TIOCGETC | |
753 static struct tchars new_tchars = {-1,-1,-1,-1,-1,-1}; | |
754 #endif | |
755 | |
756 init_sys_modes () | |
757 { | |
579 | 758 struct emacs_tty tty; |
759 | |
491 | 760 #ifdef VMS |
761 #if 0 | |
762 static int oob_chars[2] = {0, 1 << 7}; /* catch C-g's */ | |
763 extern int (*interrupt_signal) (); | |
764 #endif | |
765 #endif | |
766 | |
767 if (noninteractive) | |
768 return; | |
769 | |
770 #ifdef VMS | |
771 if (!input_ef) | |
772 input_ef = get_kbd_event_flag (); | |
773 /* LIB$GET_EF (&input_ef); */ | |
774 SYS$CLREF (input_ef); | |
775 waiting_for_ast = 0; | |
776 if (!timer_ef) | |
777 timer_ef = get_timer_event_flag (); | |
778 /* LIB$GET_EF (&timer_ef); */ | |
779 SYS$CLREF (timer_ef); | |
780 if (!process_ef) | |
781 { | |
782 LIB$GET_EF (&process_ef); | |
783 SYS$CLREF (process_ef); | |
784 } | |
785 if (input_ef / 32 != process_ef / 32) | |
786 croak ("Input and process event flags in different clusters."); | |
787 if (input_ef / 32 != timer_ef / 32) | |
788 croak ("Input and process event flags in different clusters."); | |
789 input_eflist = ((unsigned) 1 << (input_ef % 32)) | | |
790 ((unsigned) 1 << (process_ef % 32)); | |
791 timer_eflist = ((unsigned) 1 << (input_ef % 32)) | | |
792 ((unsigned) 1 << (timer_ef % 32)); | |
793 #ifndef VMS4_4 | |
794 sys_access_reinit (); | |
795 #endif | |
796 #endif /* not VMS */ | |
579 | 797 |
798 EMACS_GET_TTY (input_fd, &old_tty); | |
799 | |
491 | 800 if (!read_socket_hook && EQ (Vwindow_system, Qnil)) |
801 { | |
579 | 802 tty = old_tty; |
491 | 803 |
804 #ifdef HAVE_TERMIO | |
579 | 805 tty.main.c_iflag |= (IGNBRK); /* Ignore break condition */ |
806 tty.main.c_iflag &= ~ICRNL; /* Disable map of CR to NL on input */ | |
491 | 807 #ifdef ISTRIP |
579 | 808 tty.main.c_iflag &= ~ISTRIP; /* don't strip 8th bit on input */ |
491 | 809 #endif |
579 | 810 tty.main.c_lflag &= ~ECHO; /* Disable echo */ |
811 tty.main.c_lflag &= ~ICANON; /* Disable erase/kill processing */ | |
1102
ff73961932eb
(init_sys_modes): Handle VDSUSP like V_DSUSP.
Richard M. Stallman <rms@gnu.org>
parents:
1048
diff
changeset
|
812 #ifdef IEXTEN |
ff73961932eb
(init_sys_modes): Handle VDSUSP like V_DSUSP.
Richard M. Stallman <rms@gnu.org>
parents:
1048
diff
changeset
|
813 tty.main.c_iflag &= ~IEXTEN; /* Disable other editing characters. */ |
ff73961932eb
(init_sys_modes): Handle VDSUSP like V_DSUSP.
Richard M. Stallman <rms@gnu.org>
parents:
1048
diff
changeset
|
814 #endif |
579 | 815 tty.main.c_lflag |= ISIG; /* Enable signals */ |
491 | 816 if (flow_control) |
817 { | |
579 | 818 tty.main.c_iflag |= IXON; /* Enable start/stop output control */ |
491 | 819 #ifdef IXANY |
579 | 820 tty.main.c_iflag &= ~IXANY; |
491 | 821 #endif /* IXANY */ |
822 } | |
823 else | |
579 | 824 tty.main.c_iflag &= ~IXON; /* Disable start/stop output control */ |
825 tty.main.c_oflag &= ~ONLCR; /* Disable map of NL to CR-NL | |
826 on output */ | |
827 tty.main.c_oflag &= ~TAB3; /* Disable tab expansion */ | |
491 | 828 #ifdef CS8 |
829 if (meta_key) | |
830 { | |
579 | 831 tty.main.c_cflag |= CS8; /* allow 8th bit on input */ |
832 tty.main.c_cflag &= ~PARENB;/* Don't check parity */ | |
491 | 833 } |
834 #endif | |
579 | 835 tty.main.c_cc[VINTR] = quit_char; /* C-g (usually) gives SIGINT */ |
491 | 836 /* Set up C-g for both SIGQUIT and SIGINT. |
837 We don't know which we will get, but we handle both alike | |
838 so which one it really gives us does not matter. */ | |
579 | 839 tty.main.c_cc[VQUIT] = quit_char; |
840 tty.main.c_cc[VMIN] = 1; /* Input should wait for at least 1 char */ | |
841 tty.main.c_cc[VTIME] = 0; /* no matter how long that takes. */ | |
491 | 842 #ifdef VSWTCH |
1102
ff73961932eb
(init_sys_modes): Handle VDSUSP like V_DSUSP.
Richard M. Stallman <rms@gnu.org>
parents:
1048
diff
changeset
|
843 tty.main.c_cc[VSWTCH] = CDISABLE; /* Turn off shell layering use |
579 | 844 of C-z */ |
491 | 845 #endif /* VSWTCH */ |
846 #if defined (mips) || defined (HAVE_TCATTR) | |
847 #ifdef VSUSP | |
1102
ff73961932eb
(init_sys_modes): Handle VDSUSP like V_DSUSP.
Richard M. Stallman <rms@gnu.org>
parents:
1048
diff
changeset
|
848 tty.main.c_cc[VSUSP] = CDISABLE; /* Turn off mips handling of C-z. */ |
491 | 849 #endif /* VSUSP */ |
850 #ifdef V_DSUSP | |
1102
ff73961932eb
(init_sys_modes): Handle VDSUSP like V_DSUSP.
Richard M. Stallman <rms@gnu.org>
parents:
1048
diff
changeset
|
851 tty.main.c_cc[V_DSUSP] = CDISABLE; /* Turn off mips handling of C-y. */ |
491 | 852 #endif /* V_DSUSP */ |
1102
ff73961932eb
(init_sys_modes): Handle VDSUSP like V_DSUSP.
Richard M. Stallman <rms@gnu.org>
parents:
1048
diff
changeset
|
853 #ifdef VDSUSP /* Some systems have VDSUSP, some have V_DSUSP. */ |
ff73961932eb
(init_sys_modes): Handle VDSUSP like V_DSUSP.
Richard M. Stallman <rms@gnu.org>
parents:
1048
diff
changeset
|
854 tty.main.c_cc[VDSUSP] = CDISABLE; |
ff73961932eb
(init_sys_modes): Handle VDSUSP like V_DSUSP.
Richard M. Stallman <rms@gnu.org>
parents:
1048
diff
changeset
|
855 #endif /* VDSUSP */ |
491 | 856 #endif /* mips or HAVE_TCATTR */ |
857 #ifdef AIX | |
858 #ifndef IBMR2AIX | |
859 /* AIX enhanced edit loses NULs, so disable it */ | |
579 | 860 tty.main.c_line = 0; |
861 tty.main.c_iflag &= ~ASCEDIT; | |
491 | 862 #else |
579 | 863 tty.main.c_cc[VSTRT] = 255; |
864 tty.main.c_cc[VSTOP] = 255; | |
865 tty.main.c_cc[VSUSP] = 255; | |
866 tty.main.c_cc[VDSUSP] = 255; | |
491 | 867 #endif /* IBMR2AIX */ |
868 /* Also, PTY overloads NUL and BREAK. | |
869 don't ignore break, but don't signal either, so it looks like NUL. | |
870 This really serves a purpose only if running in an XTERM window | |
871 or via TELNET or the like, but does no harm elsewhere. */ | |
579 | 872 tty.main.c_iflag &= ~IGNBRK; |
873 tty.main.c_iflag &= ~BRKINT; | |
491 | 874 #endif |
875 #else /* if not HAVE_TERMIO */ | |
876 #ifdef VMS | |
579 | 877 tty.main.tt_char |= TT$M_NOECHO; |
491 | 878 if (meta_key) |
579 | 879 tty.main.tt_char |= TT$M_EIGHTBIT |
491 | 880 if (flow_control) |
579 | 881 tty.main.tt_char |= TT$M_TTSYNC; |
491 | 882 else |
579 | 883 tty.main.tt_char &= ~TT$M_TTSYNC; |
884 tty.main.tt2_char |= TT2$M_PASTHRU | TT2$M_XON; | |
491 | 885 #else /* not VMS (BSD, that is) */ |
579 | 886 tty.main.sg_flags &= ~(ECHO | CRMOD | XTABS); |
491 | 887 if (meta_key) |
579 | 888 tty.main.sg_flags |= ANYP; |
889 tty.main.sg_flags |= interrupt_input ? RAW : CBREAK; | |
491 | 890 #endif /* not VMS (BSD, that is) */ |
891 #endif /* not HAVE_TERMIO */ | |
892 | |
579 | 893 /* If going to use CBREAK mode, we must request C-g to interrupt |
894 and turn off start and stop chars, etc. If not going to use | |
895 CBREAK mode, do this anyway so as to turn off local flow | |
896 control for user coming over network on 4.2; in this case, | |
897 only t_stopc and t_startc really matter. */ | |
898 #ifndef HAVE_TERMIO | |
899 #ifdef TIOCGETC | |
900 /* Note: if not using CBREAK mode, it makes no difference how we | |
901 set this */ | |
902 tty.tchars = new_tchars; | |
903 tty.tchars.t_intrc = quit_char; | |
904 if (flow_control) | |
905 { | |
906 tty.tchars.t_startc = '\021'; | |
907 tty.tchars.t_stopc = '\023'; | |
908 } | |
909 | |
910 /* LPASS8 is new in 4.3, and makes cbreak mode provide all 8 bits. */ | |
911 #ifndef LPASS8 | |
912 #define LPASS8 0 | |
491 | 913 #endif |
579 | 914 |
915 #ifdef BSD4_1 | |
916 #define LNOFLSH 0100000 | |
917 #endif | |
918 | |
919 tty.lmode = LDECCTQ | LLITOUT | LPASS8 | LNOFLSH | old_tty.lmode; | |
920 | |
921 #ifdef BSD4_1 | |
922 lmode = tty.lmode; | |
923 #endif | |
924 | |
925 #endif /* TIOCGETC */ | |
926 #endif /* not HAVE_TERMIO */ | |
927 | |
928 #ifdef TIOCGLTC | |
929 tty.ltchars = new_ltchars; | |
930 #endif /* TIOCGLTC */ | |
931 | |
932 EMACS_SET_TTY (input_fd, &tty, 0); | |
491 | 933 |
934 /* This code added to insure that, if flow-control is not to be used, | |
766 | 935 we have an unlocked terminal at the start. */ |
579 | 936 |
491 | 937 #ifdef TCXONC |
938 if (!flow_control) ioctl (0, TCXONC, 1); | |
939 #endif | |
940 #ifndef APOLLO | |
941 #ifdef TIOCSTART | |
942 if (!flow_control) ioctl (0, TIOCSTART, 0); | |
943 #endif | |
944 #endif | |
945 | |
946 #ifdef AIX | |
947 hft_init (); | |
948 #ifdef IBMR2AIX | |
949 { | |
950 /* IBM's HFT device usually thinks a ^J should be LF/CR. We need it | |
951 to be only LF. This is the way that is done. */ | |
952 struct termio tty; | |
953 | |
954 if (ioctl (1, HFTGETID, &tty) != -1) | |
955 write (1, "\033[20l", 5); | |
956 } | |
957 #endif | |
958 #endif | |
959 | |
960 #ifdef VMS | |
961 /* Appears to do nothing when in PASTHRU mode. | |
579 | 962 SYS$QIOW (0, input_fd, IO$_SETMODE|IO$M_OUTBAND, 0, 0, 0, |
491 | 963 interrupt_signal, oob_chars, 0, 0, 0, 0); |
964 */ | |
965 queue_kbd_input (0); | |
966 #endif /* VMS */ | |
967 } | |
968 | |
969 #ifdef F_SETFL | |
970 #ifdef F_GETOWN /* F_SETFL does not imply existance of F_GETOWN */ | |
971 if (interrupt_input) | |
972 { | |
973 old_fcntl_owner = fcntl (0, F_GETOWN, 0); | |
974 fcntl (0, F_SETOWN, getpid ()); | |
975 init_sigio (); | |
976 } | |
977 #endif /* F_GETOWN */ | |
978 #endif /* F_SETFL */ | |
979 | |
980 #ifdef BSD4_1 | |
981 if (interrupt_input) | |
982 init_sigio (); | |
983 #endif | |
984 | |
985 #ifdef VMS /* VMS sometimes has this symbol but lacks setvbuf. */ | |
986 #undef _IOFBF | |
987 #endif | |
988 #ifdef _IOFBF | |
989 /* This symbol is defined on recent USG systems. | |
990 Someone says without this call USG won't really buffer the file | |
991 even with a call to setbuf. */ | |
992 setvbuf (stdout, _sobuf, _IOFBF, sizeof _sobuf); | |
993 #else | |
994 setbuf (stdout, _sobuf); | |
995 #endif | |
996 set_terminal_modes (); | |
997 if (term_initted && no_redraw_on_reenter) | |
998 { | |
999 if (display_completed) | |
1000 direct_output_forward_char (0); | |
1001 } | |
1002 else | |
1003 { | |
766 | 1004 frame_garbaged = 1; |
1005 #ifdef MULTI_FRAME | |
1006 if (FRAMEP (Vterminal_frame)) | |
1007 FRAME_GARBAGED_P (XFRAME (Vterminal_frame)) = 1; | |
491 | 1008 #endif |
1009 } | |
579 | 1010 |
491 | 1011 term_initted = 1; |
1012 } | |
1013 | |
1014 /* Return nonzero if safe to use tabs in output. | |
1015 At the time this is called, init_sys_modes has not been done yet. */ | |
1016 | |
1017 tabs_safe_p () | |
1018 { | |
579 | 1019 struct emacs_tty tty; |
1020 | |
1021 EMACS_GET_TTY (input_fd, &tty); | |
1022 return EMACS_TTY_TABS_OK (&tty); | |
491 | 1023 } |
1024 | |
1025 /* Get terminal size from system. | |
1026 Store number of lines into *heightp and width into *widthp. | |
1027 If zero or a negative number is stored, the value is not valid. */ | |
1028 | |
766 | 1029 get_frame_size (widthp, heightp) |
491 | 1030 int *widthp, *heightp; |
1031 { | |
579 | 1032 |
1033 #ifdef TIOCGWINSZ | |
1034 | |
1035 /* BSD-style. */ | |
1036 struct winsize size; | |
1037 | |
1038 if (ioctl (input_fd, TIOCGWINSZ, &size) == -1) | |
1039 *widthp = *heightp = 0; | |
1040 else | |
1041 { | |
1042 *widthp = size.ws_col; | |
1043 *heightp = size.ws_row; | |
1044 } | |
1045 | |
1046 #else | |
491 | 1047 #ifdef TIOCGSIZE |
579 | 1048 |
1049 /* SunOS - style. */ | |
1050 struct ttysize size; | |
1051 | |
1052 if (ioctl (input_fd, TIOCGSIZE, &size) == -1) | |
1053 *widthp = *heightp = 0; | |
1054 else | |
1055 { | |
1056 *widthp = size.ts_cols; | |
1057 *heightp = size.ts_lines; | |
1058 } | |
1059 | |
1060 #else | |
491 | 1061 #ifdef VMS |
579 | 1062 |
1063 struct sensemode tty; | |
1064 | |
1065 SYS$QIOW (0, input_fd, IO$_SENSEMODE, &tty, 0, 0, | |
491 | 1066 &tty.class, 12, 0, 0, 0, 0); |
1067 *widthp = tty.scr_wid; | |
1068 *heightp = tty.scr_len; | |
579 | 1069 |
491 | 1070 #else /* system doesn't know size */ |
579 | 1071 |
491 | 1072 *widthp = 0; |
1073 *heightp = 0; | |
579 | 1074 |
1075 #endif /* not VMS */ | |
1076 #endif /* not SunOS-style */ | |
1077 #endif /* not BSD-style */ | |
491 | 1078 } |
579 | 1079 |
491 | 1080 |
579 | 1081 /* Prepare the terminal for exiting Emacs; move the cursor to the |
766 | 1082 bottom of the frame, turn off interrupt-driven I/O, etc. */ |
491 | 1083 reset_sys_modes () |
1084 { | |
1085 if (noninteractive) | |
1086 { | |
1087 fflush (stdout); | |
1088 return; | |
1089 } | |
1090 if (!term_initted) | |
1091 return; | |
1092 if (read_socket_hook || !EQ (Vwindow_system, Qnil)) | |
1093 return; | |
766 | 1094 cursor_to (FRAME_HEIGHT (selected_frame) - 1, 0); |
1095 clear_end_of_line (FRAME_WIDTH (selected_frame)); | |
491 | 1096 /* clear_end_of_line may move the cursor */ |
766 | 1097 cursor_to (FRAME_HEIGHT (selected_frame) - 1, 0); |
491 | 1098 #ifdef IBMR2AIX |
1099 { | |
1100 /* HFT devices normally use ^J as a LF/CR. We forced it to | |
1101 do the LF only. Now, we need to reset it. */ | |
1102 struct termio tty; | |
1103 | |
1104 if (ioctl (1, HFTGETID, &tty) != -1) | |
1105 write (1, "\033[20h", 5); | |
1106 } | |
1107 #endif | |
1108 | |
1109 reset_terminal_modes (); | |
1110 fflush (stdout); | |
1111 #ifdef BSD | |
1112 #ifndef BSD4_1 | |
1113 /* Avoid possible loss of output when changing terminal modes. */ | |
1114 fsync (fileno (stdout)); | |
1115 #endif | |
1116 #endif | |
579 | 1117 |
491 | 1118 #ifdef F_SETFL |
1119 #ifdef F_SETOWN /* F_SETFL does not imply existance of F_SETOWN */ | |
1120 if (interrupt_input) | |
1121 { | |
1122 reset_sigio (); | |
1123 fcntl (0, F_SETOWN, old_fcntl_owner); | |
1124 } | |
1125 #endif /* F_SETOWN */ | |
1126 #endif /* F_SETFL */ | |
1127 #ifdef BSD4_1 | |
1128 if (interrupt_input) | |
1129 reset_sigio (); | |
1130 #endif /* BSD4_1 */ | |
579 | 1131 |
1132 while (EMACS_SET_TTY (input_fd, &old_tty, 0) < 0 && errno == EINTR) | |
1133 ; | |
491 | 1134 |
1135 #ifdef AIX | |
1136 hft_reset (); | |
1137 #endif | |
1138 } | |
1139 | |
1140 #ifdef HAVE_PTYS | |
1141 | |
1142 /* Set up the proper status flags for use of a pty. */ | |
1143 | |
1144 setup_pty (fd) | |
1145 int fd; | |
1146 { | |
1147 /* I'm told that TOICREMOTE does not mean control chars | |
1148 "can't be sent" but rather that they don't have | |
1149 input-editing or signaling effects. | |
1150 That should be good, because we have other ways | |
1151 to do those things in Emacs. | |
1152 However, telnet mode seems not to work on 4.2. | |
1153 So TIOCREMOTE is turned off now. */ | |
1154 | |
1155 /* Under hp-ux, if TIOCREMOTE is turned on, some calls | |
1156 will hang. In particular, the "timeout" feature (which | |
1157 causes a read to return if there is no data available) | |
1158 does this. Also it is known that telnet mode will hang | |
1159 in such a way that Emacs must be stopped (perhaps this | |
1160 is the same problem). | |
1161 | |
1162 If TIOCREMOTE is turned off, then there is a bug in | |
1163 hp-ux which sometimes loses data. Apparently the | |
1164 code which blocks the master process when the internal | |
1165 buffer fills up does not work. Other than this, | |
1166 though, everything else seems to work fine. | |
1167 | |
1168 Since the latter lossage is more benign, we may as well | |
1169 lose that way. -- cph */ | |
1170 #ifdef FIONBIO | |
1171 #ifdef SYSV_PTYS | |
1172 { | |
1173 int on = 1; | |
1174 ioctl (fd, FIONBIO, &on); | |
1175 } | |
1176 #endif | |
1177 #endif | |
1178 #ifdef IBMRTAIX | |
1179 /* On AIX, the parent gets SIGHUP when a pty attached child dies. So, we */ | |
1180 /* ignore SIGHUP once we've started a child on a pty. Note that this may */ | |
1181 /* cause EMACS not to die when it should, i.e., when its own controlling */ | |
1182 /* tty goes away. I've complained to the AIX developers, and they may */ | |
1183 /* change this behavior, but I'm not going to hold my breath. */ | |
1184 signal (SIGHUP, SIG_IGN); | |
1185 #endif | |
1186 } | |
1187 #endif /* HAVE_PTYS */ | |
1188 | |
1189 #ifdef VMS | |
1190 | |
1191 /* Assigning an input channel is done at the start of Emacs execution. | |
1192 This is called each time Emacs is resumed, also, but does nothing | |
1193 because input_chain is no longer zero. */ | |
1194 | |
1195 init_vms_input () | |
1196 { | |
1197 int status; | |
1198 | |
579 | 1199 if (input_fd == 0) |
491 | 1200 { |
579 | 1201 status = SYS$ASSIGN (&input_dsc, &input_fd, 0, 0); |
491 | 1202 if (! (status & 1)) |
1203 LIB$STOP (status); | |
1204 } | |
1205 } | |
1206 | |
1207 /* Deassigning the input channel is done before exiting. */ | |
1208 | |
1209 stop_vms_input () | |
1210 { | |
579 | 1211 return SYS$DASSGN (input_fd); |
491 | 1212 } |
1213 | |
1214 short input_buffer; | |
1215 | |
1216 /* Request reading one character into the keyboard buffer. | |
1217 This is done as soon as the buffer becomes empty. */ | |
1218 | |
1219 queue_kbd_input () | |
1220 { | |
1221 int status; | |
1222 waiting_for_ast = 0; | |
1223 stop_input = 0; | |
579 | 1224 status = SYS$QIO (0, input_fd, IO$_READVBLK, |
491 | 1225 &input_iosb, kbd_input_ast, 1, |
1226 &input_buffer, 1, 0, terminator_mask, 0, 0); | |
1227 } | |
1228 | |
1229 int input_count; | |
1230 | |
1231 /* Ast routine that is called when keyboard input comes in | |
1232 in accord with the SYS$QIO above. */ | |
1233 | |
1234 kbd_input_ast () | |
1235 { | |
1236 register int c = -1; | |
1237 int old_errno = errno; | |
648 | 1238 extern EMACS_TIME *input_available_clear_time; |
491 | 1239 |
1240 if (waiting_for_ast) | |
1241 SYS$SETEF (input_ef); | |
1242 waiting_for_ast = 0; | |
1243 input_count++; | |
1244 #ifdef ASTDEBUG | |
1245 if (input_count == 25) | |
1246 exit (1); | |
1247 printf ("Ast # %d,", input_count); | |
1248 printf (" iosb = %x, %x, %x, %x", | |
1249 input_iosb.offset, input_iosb.status, input_iosb.termlen, | |
1250 input_iosb.term); | |
1251 #endif | |
1252 if (input_iosb.offset) | |
1253 { | |
1254 c = input_buffer; | |
1255 #ifdef ASTDEBUG | |
1256 printf (", char = 0%o", c); | |
1257 #endif | |
1258 } | |
1259 #ifdef ASTDEBUG | |
1260 printf ("\n"); | |
1261 fflush (stdout); | |
1262 sleep (1); | |
1263 #endif | |
1264 if (! stop_input) | |
1265 queue_kbd_input (); | |
1266 if (c >= 0) | |
1267 { | |
1268 struct input_event e; | |
1269 e.kind = ascii_keystroke; | |
1270 XSET (buf[i].code, Lisp_Int, cbuf[i]); | |
766 | 1271 e.frame = selected_frame; |
491 | 1272 kbd_buffer_store_event (&e); |
1273 } | |
1274 | |
648 | 1275 if (input_available_clear_time) |
1276 EMACS_SET_SECS_USECS (*input_available_clear_time, 0, 0); | |
491 | 1277 errno = old_errno; |
1278 } | |
1279 | |
1280 /* Wait until there is something in kbd_buffer. */ | |
1281 | |
1282 wait_for_kbd_input () | |
1283 { | |
1284 extern int have_process_input, process_exited; | |
1285 | |
1286 /* If already something, avoid doing system calls. */ | |
1287 if (detect_input_pending ()) | |
1288 { | |
1289 return; | |
1290 } | |
1291 /* Clear a flag, and tell ast routine above to set it. */ | |
1292 SYS$CLREF (input_ef); | |
1293 waiting_for_ast = 1; | |
1294 /* Check for timing error: ast happened while we were doing that. */ | |
1295 if (!detect_input_pending ()) | |
1296 { | |
1297 /* No timing error: wait for flag to be set. */ | |
1298 set_waiting_for_input (0); | |
1299 SYS$WFLOR (input_ef, input_eflist); | |
1300 clear_waiting_for_input (0); | |
1301 if (!detect_input_pending ()) | |
1302 /* Check for subprocess input availability */ | |
1303 { | |
1304 int dsp = have_process_input || process_exited; | |
1305 | |
1306 SYS$CLREF (process_ef); | |
1307 if (have_process_input) | |
1308 process_command_input (); | |
1309 if (process_exited) | |
1310 process_exit (); | |
1311 if (dsp) | |
1312 { | |
1313 update_mode_lines++; | |
1314 redisplay_preserve_echo_area (); | |
1315 } | |
1316 } | |
1317 } | |
1318 waiting_for_ast = 0; | |
1319 } | |
1320 | |
1321 /* Get rid of any pending QIO, when we are about to suspend | |
1322 or when we want to throw away pending input. | |
1323 We wait for a positive sign that the AST routine has run | |
1324 and therefore there is no I/O request queued when we return. | |
1325 SYS$SETAST is used to avoid a timing error. */ | |
1326 | |
1327 end_kbd_input () | |
1328 { | |
1329 #ifdef ASTDEBUG | |
1330 printf ("At end_kbd_input.\n"); | |
1331 fflush (stdout); | |
1332 sleep (1); | |
1333 #endif | |
1334 if (LIB$AST_IN_PROG ()) /* Don't wait if suspending from kbd_buffer_store_event! */ | |
1335 { | |
579 | 1336 SYS$CANCEL (input_fd); |
491 | 1337 return; |
1338 } | |
1339 | |
1340 SYS$SETAST (0); | |
1341 /* Clear a flag, and tell ast routine above to set it. */ | |
1342 SYS$CLREF (input_ef); | |
1343 waiting_for_ast = 1; | |
1344 stop_input = 1; | |
579 | 1345 SYS$CANCEL (input_fd); |
491 | 1346 SYS$SETAST (1); |
1347 SYS$WAITFR (input_ef); | |
1348 waiting_for_ast = 0; | |
1349 } | |
1350 | |
1351 /* Wait for either input available or time interval expiry. */ | |
1352 | |
1353 input_wait_timeout (timeval) | |
1354 int timeval; /* Time to wait, in seconds */ | |
1355 { | |
1356 int time [2]; | |
1357 static int zero = 0; | |
1358 static int large = -10000000; | |
1359 | |
1360 LIB$EMUL (&timeval, &large, &zero, time); /* Convert to VMS format */ | |
1361 | |
1362 /* If already something, avoid doing system calls. */ | |
1363 if (detect_input_pending ()) | |
1364 { | |
1365 return; | |
1366 } | |
1367 /* Clear a flag, and tell ast routine above to set it. */ | |
1368 SYS$CLREF (input_ef); | |
1369 waiting_for_ast = 1; | |
1370 /* Check for timing error: ast happened while we were doing that. */ | |
1371 if (!detect_input_pending ()) | |
1372 { | |
1373 /* No timing error: wait for flag to be set. */ | |
1374 SYS$CANTIM (1, 0); | |
1375 if (SYS$SETIMR (timer_ef, time, 0, 1) & 1) /* Set timer */ | |
1376 SYS$WFLOR (timer_ef, timer_eflist); /* Wait for timer expiry or input */ | |
1377 } | |
1378 waiting_for_ast = 0; | |
1379 } | |
1380 | |
1381 /* The standard `sleep' routine works some other way | |
1382 and it stops working if you have ever quit out of it. | |
1383 This one continues to work. */ | |
1384 | |
1385 sys_sleep (timeval) | |
1386 int timeval; | |
1387 { | |
1388 int time [2]; | |
1389 static int zero = 0; | |
1390 static int large = -10000000; | |
1391 | |
1392 LIB$EMUL (&timeval, &large, &zero, time); /* Convert to VMS format */ | |
1393 | |
1394 SYS$CANTIM (1, 0); | |
1395 if (SYS$SETIMR (timer_ef, time, 0, 1) & 1) /* Set timer */ | |
1396 SYS$WAITFR (timer_ef); /* Wait for timer expiry only */ | |
1397 } | |
1398 | |
1399 init_sigio () | |
1400 { | |
1401 request_sigio (); | |
1402 } | |
1403 | |
1404 reset_sigio () | |
1405 { | |
1406 unrequest_sigio (); | |
1407 } | |
1408 | |
1409 request_sigio () | |
1410 { | |
1411 croak ("request sigio"); | |
1412 } | |
1413 | |
1414 unrequest_sigio () | |
1415 { | |
1416 croak ("unrequest sigio"); | |
1417 } | |
1418 | |
1419 #endif /* VMS */ | |
1420 | |
1421 /* Note that VMS compiler won't accept defined (CANNOT_DUMP). */ | |
1422 #ifndef CANNOT_DUMP | |
1423 #define NEED_STARTS | |
1424 #endif | |
1425 | |
1426 #ifndef SYSTEM_MALLOC | |
1427 #ifndef NEED_STARTS | |
1428 #define NEED_STARTS | |
1429 #endif | |
1430 #endif | |
1431 | |
1432 #ifdef NEED_STARTS | |
1433 /* Some systems that cannot dump also cannot implement these. */ | |
1434 | |
1435 /* | |
1436 * Return the address of the start of the text segment prior to | |
1437 * doing an unexec. After unexec the return value is undefined. | |
1438 * See crt0.c for further explanation and _start. | |
1439 * | |
1440 */ | |
1441 | |
1442 #ifndef CANNOT_UNEXEC | |
1443 char * | |
1444 start_of_text () | |
1445 { | |
1446 #ifdef TEXT_START | |
1447 return ((char *) TEXT_START); | |
1448 #else | |
1449 #ifdef GOULD | |
1450 extern csrt (); | |
1451 return ((char *) csrt); | |
1452 #else /* not GOULD */ | |
1453 extern int _start (); | |
1454 return ((char *) _start); | |
1455 #endif /* GOULD */ | |
1456 #endif /* TEXT_START */ | |
1457 } | |
1458 #endif /* not CANNOT_UNEXEC */ | |
1459 | |
1460 /* | |
1461 * Return the address of the start of the data segment prior to | |
1462 * doing an unexec. After unexec the return value is undefined. | |
1463 * See crt0.c for further information and definition of data_start. | |
1464 * | |
1465 * Apparently, on BSD systems this is etext at startup. On | |
1466 * USG systems (swapping) this is highly mmu dependent and | |
1467 * is also dependent on whether or not the program is running | |
1468 * with shared text. Generally there is a (possibly large) | |
1469 * gap between end of text and start of data with shared text. | |
1470 * | |
1471 * On Uniplus+ systems with shared text, data starts at a | |
1472 * fixed address. Each port (from a given oem) is generally | |
1473 * different, and the specific value of the start of data can | |
1474 * be obtained via the UniPlus+ specific "uvar" system call, | |
1475 * however the method outlined in crt0.c seems to be more portable. | |
1476 * | |
1477 * Probably what will have to happen when a USG unexec is available, | |
1478 * at least on UniPlus, is temacs will have to be made unshared so | |
1479 * that text and data are contiguous. Then once loadup is complete, | |
1480 * unexec will produce a shared executable where the data can be | |
1481 * at the normal shared text boundry and the startofdata variable | |
1482 * will be patched by unexec to the correct value. | |
1483 * | |
1484 */ | |
1485 | |
1486 char * | |
1487 start_of_data () | |
1488 { | |
1489 #ifdef DATA_START | |
1490 return ((char *) DATA_START); | |
1491 #else | |
1492 extern int data_start; | |
1493 return ((char *) &data_start); | |
1494 #endif | |
1495 } | |
1496 #endif /* NEED_STARTS (not CANNOT_DUMP or not SYSTEM_MALLOC) */ | |
1497 | |
1498 #ifndef CANNOT_DUMP | |
1499 /* Some systems that cannot dump also cannot implement these. */ | |
1500 | |
1501 /* | |
1502 * Return the address of the end of the text segment prior to | |
1503 * doing an unexec. After unexec the return value is undefined. | |
1504 */ | |
1505 | |
1506 char * | |
1507 end_of_text () | |
1508 { | |
1509 #ifdef TEXT_END | |
1510 return ((char *) TEXT_END); | |
1511 #else | |
1512 extern int etext; | |
1513 return ((char *) &etext); | |
1514 #endif | |
1515 } | |
1516 | |
1517 /* | |
1518 * Return the address of the end of the data segment prior to | |
1519 * doing an unexec. After unexec the return value is undefined. | |
1520 */ | |
1521 | |
1522 char * | |
1523 end_of_data () | |
1524 { | |
1525 #ifdef DATA_END | |
1526 return ((char *) DATA_END); | |
1527 #else | |
1528 extern int edata; | |
1529 return ((char *) &edata); | |
1530 #endif | |
1531 } | |
1532 | |
1533 #endif /* not CANNOT_DUMP */ | |
1534 | |
1535 /* Get_system_name returns as its value | |
1536 a string for the Lisp function system-name to return. */ | |
1537 | |
1538 #ifdef BSD4_1 | |
1539 #include <whoami.h> | |
1540 #endif | |
1541 | |
1542 #ifdef USG | |
1543 /* Can't have this within the function since `static' is #defined to nothing */ | |
1544 static struct utsname get_system_name_name; | |
1545 #endif | |
1546 | |
1547 char * | |
1548 get_system_name () | |
1549 { | |
1550 #ifdef USG | |
1551 uname (&get_system_name_name); | |
1552 return (get_system_name_name.nodename); | |
1553 #else /* Not USG */ | |
1554 #ifdef BSD4_1 | |
1555 return sysname; | |
1556 #else /* not USG, not 4.1 */ | |
1557 static char system_name_saved[32]; | |
1558 #ifdef VMS | |
1559 char *sp; | |
1560 if ((sp = egetenv ("SYS$NODE")) == 0) | |
1561 sp = "vax-vms"; | |
1562 else | |
1563 { | |
1564 char *end; | |
1565 | |
1566 if ((end = index (sp, ':')) != 0) | |
1567 *end = '\0'; | |
1568 } | |
1569 strcpy (system_name_saved, sp); | |
1570 #else /* not VMS */ | |
1571 gethostname (system_name_saved, sizeof (system_name_saved)); | |
1572 #endif /* not VMS */ | |
1573 return system_name_saved; | |
1574 #endif /* not USG, not 4.1 */ | |
1575 #endif /* not USG */ | |
1576 } | |
1577 | |
1578 #ifndef VMS | |
1579 #ifndef HAVE_SELECT | |
1580 | |
1581 #ifdef HAVE_X_WINDOWS | |
1582 /* Cause explanatory error message at compile time, | |
1583 since the select emulation is not good enough for X. */ | |
1584 int *x = &x_windows_lose_if_no_select_system_call; | |
1585 #endif | |
1586 | |
1587 /* Emulate as much as select as is possible under 4.1 and needed by Gnu Emacs | |
1588 * Only checks read descriptors. | |
1589 */ | |
1590 /* How long to wait between checking fds in select */ | |
1591 #define SELECT_PAUSE 1 | |
1592 int select_alarmed; | |
1593 | |
1594 /* For longjmp'ing back to read_input_waiting. */ | |
1595 | |
1596 jmp_buf read_alarm_throw; | |
1597 | |
1598 /* Nonzero if the alarm signal should throw back to read_input_waiting. | |
1599 The read_socket_hook function sets this to 1 while it is waiting. */ | |
1600 | |
1601 int read_alarm_should_throw; | |
1602 | |
1603 SIGTYPE | |
1604 select_alarm () | |
1605 { | |
1606 select_alarmed = 1; | |
1607 #ifdef BSD4_1 | |
1608 sigrelse (SIGALRM); | |
1609 #else /* not BSD4_1 */ | |
1610 signal (SIGALRM, SIG_IGN); | |
1611 #endif /* not BSD4_1 */ | |
1612 if (read_alarm_should_throw) | |
1613 longjmp (read_alarm_throw, 1); | |
1614 } | |
1615 | |
1616 /* Only rfds are checked. */ | |
1617 int | |
1618 select (nfds, rfds, wfds, efds, timeout) | |
1619 int nfds; | |
1620 int *rfds, *wfds, *efds, *timeout; | |
1621 { | |
1622 int ravail = 0, orfds = 0, old_alarm; | |
1623 int timeoutval = timeout ? *timeout : 100000; | |
1624 int *local_timeout = &timeoutval; | |
1625 extern int proc_buffered_char[]; | |
1626 #ifndef subprocesses | |
1627 int process_tick = 0, update_tick = 0; | |
1628 #else | |
1629 extern int process_tick, update_tick; | |
1630 #endif | |
1631 SIGTYPE (*old_trap) (); | |
1632 unsigned char buf; | |
1633 | |
1634 if (rfds) | |
1635 { | |
1636 orfds = *rfds; | |
1637 *rfds = 0; | |
1638 } | |
1639 if (wfds) | |
1640 *wfds = 0; | |
1641 if (efds) | |
1642 *efds = 0; | |
1643 | |
1644 /* If we are looking only for the terminal, with no timeout, | |
1645 just read it and wait -- that's more efficient. */ | |
1646 if (orfds == 1 && *local_timeout == 100000 && process_tick == update_tick) | |
1647 { | |
1648 if (! detect_input_pending ()) | |
1649 read_input_waiting (); | |
1650 *rfds = 1; | |
1651 return 1; | |
1652 } | |
1653 | |
1654 /* Once a second, till the timer expires, check all the flagged read | |
1655 * descriptors to see if any input is available. If there is some then | |
1656 * set the corresponding bit in the return copy of rfds. | |
1657 */ | |
1658 while (1) | |
1659 { | |
1660 register int to_check, bit, fd; | |
1661 | |
1662 if (rfds) | |
1663 { | |
1664 for (to_check = nfds, bit = 1, fd = 0; --to_check >= 0; bit <<= 1, fd++) | |
1665 { | |
1666 if (orfds & bit) | |
1667 { | |
1668 int avail = 0, status = 0; | |
1669 | |
1670 if (bit == 1) | |
1671 avail = detect_input_pending (); /* Special keyboard handler */ | |
1672 else | |
1673 { | |
1674 #ifdef FIONREAD | |
1675 status = ioctl (fd, FIONREAD, &avail); | |
1676 #else /* no FIONREAD */ | |
1677 /* Hoping it will return -1 if nothing available | |
1678 or 0 if all 0 chars requested are read. */ | |
1679 if (proc_buffered_char[fd] >= 0) | |
1680 avail = 1; | |
1681 else | |
1682 { | |
1683 avail = read (fd, &buf, 1); | |
1684 if (avail > 0) | |
1685 proc_buffered_char[fd] = buf; | |
1686 } | |
1687 #endif /* no FIONREAD */ | |
1688 } | |
1689 if (status >= 0 && avail > 0) | |
1690 { | |
1691 (*rfds) |= bit; | |
1692 ravail++; | |
1693 } | |
1694 } | |
1695 } | |
1696 } | |
1697 if (*local_timeout == 0 || ravail != 0 || process_tick != update_tick) | |
1698 break; | |
1699 old_alarm = alarm (0); | |
1014
6e25f9b75841
* sysdep.c (select): There's no need to cast the return value of
Jim Blandy <jimb@redhat.com>
parents:
766
diff
changeset
|
1700 old_trap = signal (SIGALRM, select_alarm); |
491 | 1701 select_alarmed = 0; |
1702 alarm (SELECT_PAUSE); | |
1703 /* Wait for a SIGALRM (or maybe a SIGTINT) */ | |
1704 while (select_alarmed == 0 && *local_timeout != 0 | |
1705 && process_tick == update_tick) | |
1706 { | |
1707 /* If we are interested in terminal input, | |
1708 wait by reading the terminal. | |
1709 That makes instant wakeup for terminal input at least. */ | |
1710 if (orfds & 1) | |
1711 { | |
1712 read_input_waiting (); | |
1713 if (detect_input_pending ()) | |
1714 select_alarmed = 1; | |
1715 } | |
1716 else | |
1717 pause (); | |
1718 } | |
1719 (*local_timeout) -= SELECT_PAUSE; | |
1720 /* Reset the old alarm if there was one */ | |
1721 alarm (0); | |
1722 signal (SIGALRM, old_trap); | |
1723 if (old_alarm != 0) | |
1724 { | |
1725 /* Reset or forge an interrupt for the original handler. */ | |
1726 old_alarm -= SELECT_PAUSE; | |
1727 if (old_alarm <= 0) | |
1728 kill (getpid (), SIGALRM); /* Fake an alarm with the orig' handler */ | |
1729 else | |
1730 alarm (old_alarm); | |
1731 } | |
1732 if (*local_timeout == 0) /* Stop on timer being cleared */ | |
1733 break; | |
1734 } | |
1735 return ravail; | |
1736 } | |
1737 | |
1738 /* Read keyboard input into the standard buffer, | |
1739 waiting for at least one character. */ | |
1740 | |
1741 /* Make all keyboard buffers much bigger when using X windows. */ | |
1742 #ifdef HAVE_X_WINDOWS | |
1743 #define BUFFER_SIZE_FACTOR 16 | |
1744 #else | |
1745 #define BUFFER_SIZE_FACTOR 1 | |
1746 #endif | |
1747 | |
1748 read_input_waiting () | |
1749 { | |
1750 char buf[256 * BUFFER_SIZE_FACTOR]; | |
1751 struct input_event e; | |
1014
6e25f9b75841
* sysdep.c (select): There's no need to cast the return value of
Jim Blandy <jimb@redhat.com>
parents:
766
diff
changeset
|
1752 int nread, i; |
6e25f9b75841
* sysdep.c (select): There's no need to cast the return value of
Jim Blandy <jimb@redhat.com>
parents:
766
diff
changeset
|
1753 extern int quit_char; |
491 | 1754 |
1755 if (read_socket_hook) | |
1756 { | |
1757 read_alarm_should_throw = 0; | |
1758 if (! setjmp (read_alarm_throw)) | |
1759 nread = (*read_socket_hook) (0, buf, 256 * BUFFER_SIZE_FACTOR, 1, 0); | |
1760 else | |
1761 nread = -1; | |
1762 } | |
1763 else | |
1764 nread = read (fileno (stdin), buf, 1); | |
1765 | |
1766 /* Scan the chars for C-g and store them in kbd_buffer. */ | |
1767 e.kind = ascii_keystroke; | |
766 | 1768 e.frame = selected_frame; |
491 | 1769 for (i = 0; i < nread; i++) |
1770 { | |
1771 XSET (e.code, Lisp_Int, buf[i]); | |
1772 kbd_buffer_store_event (&e); | |
1773 /* Don't look at input that follows a C-g too closely. | |
1774 This reduces lossage due to autorepeat on C-g. */ | |
1014
6e25f9b75841
* sysdep.c (select): There's no need to cast the return value of
Jim Blandy <jimb@redhat.com>
parents:
766
diff
changeset
|
1775 if (buf[i] == quit_char) |
491 | 1776 break; |
1777 } | |
1778 } | |
1779 | |
1780 #endif /* not HAVE_SELECT */ | |
1781 #endif /* not VMS */ | |
1782 | |
1783 #ifdef BSD4_1 | |
1784 /* | |
1785 * Partially emulate 4.2 open call. | |
1786 * open is defined as this in 4.1. | |
1787 * | |
1788 * - added by Michael Bloom @ Citicorp/TTI | |
1789 * | |
1790 */ | |
1791 | |
1792 int | |
1793 sys_open (path, oflag, mode) | |
1794 char *path; | |
1795 int oflag, mode; | |
1796 { | |
1797 if (oflag & O_CREAT) | |
1798 return creat (path, mode); | |
1799 else | |
1800 return open (path, oflag); | |
1801 } | |
1802 | |
1803 init_sigio () | |
1804 { | |
1805 if (noninteractive) | |
1806 return; | |
1807 lmode = LINTRUP | lmode; | |
1808 ioctl (0, TIOCLSET, &lmode); | |
1809 } | |
1810 | |
1811 reset_sigio () | |
1812 { | |
1813 if (noninteractive) | |
1814 return; | |
1815 lmode = ~LINTRUP & lmode; | |
1816 ioctl (0, TIOCLSET, &lmode); | |
1817 } | |
1818 | |
1819 request_sigio () | |
1820 { | |
1821 sigrelse (SIGTINT); | |
1822 | |
1823 interrupts_deferred = 0; | |
1824 } | |
1825 | |
1826 unrequest_sigio () | |
1827 { | |
1828 sighold (SIGTINT); | |
1829 | |
1830 interrupts_deferred = 1; | |
1831 } | |
1832 | |
1833 /* still inside #ifdef BSD4_1 */ | |
1834 #ifdef subprocesses | |
1835 | |
1836 int sigheld; /* Mask of held signals */ | |
1837 | |
1838 sigholdx (signum) | |
1839 int signum; | |
1840 { | |
1841 sigheld |= sigbit (signum); | |
1842 sighold (signum); | |
1843 } | |
1844 | |
1845 sigisheld (signum) | |
1846 int signum; | |
1847 { | |
1848 sigheld |= sigbit (signum); | |
1849 } | |
1850 | |
1851 sigunhold (signum) | |
1852 int signum; | |
1853 { | |
1854 sigheld &= ~sigbit (signum); | |
1855 sigrelse (signum); | |
1856 } | |
1857 | |
1858 sigfree () /* Free all held signals */ | |
1859 { | |
1860 int i; | |
1861 for (i = 0; i < NSIG; i++) | |
1862 if (sigheld & sigbit (i)) | |
1863 sigrelse (i); | |
1864 sigheld = 0; | |
1865 } | |
1866 | |
1867 sigbit (i) | |
1868 { | |
1869 return 1 << (i - 1); | |
1870 } | |
1871 #endif /* subprocesses */ | |
1872 #endif /* BSD4_1 */ | |
1873 | |
1874 /* POSIX signals support - DJB */ | |
1875 /* Anyone with POSIX signals should have ANSI C declarations */ | |
1876 | |
1877 #ifdef POSIX_SIGNALS | |
1878 | |
1879 sigset_t old_mask, empty_mask, full_mask, temp_mask; | |
1880 static struct sigaction new_action, old_action; | |
1881 | |
1882 init_signals () | |
1883 { | |
1884 #ifdef POSIX_SIGNALS | |
1885 sigemptyset (&signal_empty_mask); | |
1886 sigfillset (&signal_full_mask); | |
1887 #endif | |
1888 } | |
1889 | |
1890 int (*signal_handler_t) (); | |
1891 | |
1892 signal_handler_t | |
1893 sys_signal (int signal_number, signal_handler_t action) | |
1894 { | |
1895 #ifdef DGUX | |
1896 /* This gets us restartable system calls for efficiency. | |
1897 The "else" code will works as well. */ | |
1898 return (berk_signal (signal_number, action)); | |
1899 #else | |
1900 sigemptyset (&new_action.sa_mask); | |
1901 new_action.sa_handler = action; | |
1902 new_action.sa_flags = NULL; | |
709 | 1903 sigaction (signal_number, &new_action, &old_action); |
491 | 1904 return (old_action.sa_handler); |
1905 #endif /* DGUX */ | |
1906 } | |
1907 | |
638 | 1908 #ifndef __GNUC__ |
1909 /* If we're compiling with GCC, we don't need this function, since it | |
1910 can be written as a macro. */ | |
1911 sigset_t | |
1912 sys_sigmask (int sig) | |
1913 { | |
1914 sigset_t mask; | |
1915 sigemptyset (&mask); | |
1916 sigaddset (&mask, sig); | |
1917 return mask; | |
1918 } | |
1919 #endif | |
1920 | |
491 | 1921 int |
1922 sys_sigpause (sigset_t new_mask) | |
1923 { | |
1924 /* pause emulating berk sigpause... */ | |
1925 sigsuspend (&new_mask); | |
1926 return (EINTR); | |
1927 } | |
1928 | |
1929 /* I'd like to have these guys return pointers to the mask storage in here, | |
1930 but there'd be trouble if the code was saving multiple masks. I'll be | |
1931 safe and pass the structure. It normally won't be more than 2 bytes | |
1932 anyhow. - DJB */ | |
1933 | |
1934 sigset_t | |
1935 sys_sigblock (sigset_t new_mask) | |
1936 { | |
1937 sigset_t old_mask; | |
1938 sigprocmask (SIG_BLOCK, &new_mask, &old_mask); | |
1939 return (old_mask); | |
1940 } | |
1941 | |
1942 sigset_t | |
1943 sys_sigunblock (sigset_t new_mask) | |
1944 { | |
1945 sigset_t old_mask; | |
1946 sigprocmask (SIG_UNBLOCK, &new_mask, &old_mask); | |
1947 return (old_mask); | |
1948 } | |
1949 | |
1950 sigset_t | |
1951 sys_sigsetmask (sigset_t new_mask) | |
1952 { | |
1953 sigset_t old_mask; | |
1954 sigprocmask (SIG_SETMASK, &new_mask, &old_mask); | |
1955 return (old_mask); | |
1956 } | |
1957 | |
1958 #endif /* POSIX_SIGNALS */ | |
1959 | |
1960 #ifndef BSTRING | |
1961 | |
1962 void | |
1963 bzero (b, length) | |
1964 register char *b; | |
1965 register int length; | |
1966 { | |
1967 #ifdef VMS | |
1968 short zero = 0; | |
1969 long max_str = 65535; | |
1970 | |
1971 while (length > max_str) { | |
1972 (void) LIB$MOVC5 (&zero, &zero, &zero, &max_str, b); | |
1973 length -= max_str; | |
1974 b += max_str; | |
1975 } | |
1976 max_str = length; | |
1977 (void) LIB$MOVC5 (&zero, &zero, &zero, &max_str, b); | |
1978 #else | |
1979 while (length-- > 0) | |
1980 *b++ = 0; | |
1981 #endif /* not VMS */ | |
1982 } | |
1983 | |
1984 /* Saying `void' requires a declaration, above, where bcopy is used | |
1985 and that declaration causes pain for systems where bcopy is a macro. */ | |
1986 bcopy (b1, b2, length) | |
1987 register char *b1; | |
1988 register char *b2; | |
1989 register int length; | |
1990 { | |
1991 #ifdef VMS | |
1992 long max_str = 65535; | |
1993 | |
1994 while (length > max_str) { | |
1995 (void) LIB$MOVC3 (&max_str, b1, b2); | |
1996 length -= max_str; | |
1997 b1 += max_str; | |
1998 b2 += max_str; | |
1999 } | |
2000 max_str = length; | |
2001 (void) LIB$MOVC3 (&length, b1, b2); | |
2002 #else | |
2003 while (length-- > 0) | |
2004 *b2++ = *b1++; | |
2005 #endif /* not VMS */ | |
2006 } | |
2007 | |
2008 int | |
2009 bcmp (b1, b2, length) /* This could be a macro! */ | |
2010 register char *b1; | |
2011 register char *b2; | |
2012 register int length; | |
2013 { | |
2014 #ifdef VMS | |
2015 struct dsc$descriptor_s src1 = {length, DSC$K_DTYPE_T, DSC$K_CLASS_S, b1}; | |
2016 struct dsc$descriptor_s src2 = {length, DSC$K_DTYPE_T, DSC$K_CLASS_S, b2}; | |
2017 | |
2018 return STR$COMPARE (&src1, &src2); | |
2019 #else | |
2020 while (length-- > 0) | |
2021 if (*b1++ != *b2++) | |
2022 return 1; | |
2023 | |
2024 return 0; | |
2025 #endif /* not VMS */ | |
2026 } | |
2027 #endif /* not BSTRING */ | |
2028 | |
2029 #ifdef USG | |
2030 /* | |
2031 * The BSD random returns numbers in the range of | |
2032 * 0 to 2e31 - 1. The USG rand returns numbers in the | |
2033 * range of 0 to 2e15 - 1. This is probably not significant | |
2034 * in this usage. | |
2035 */ | |
2036 | |
2037 long | |
2038 random () | |
2039 { | |
2040 /* Arrange to return a range centered on zero. */ | |
2041 return (rand () << 15) + rand () - (1 << 29); | |
2042 } | |
2043 | |
2044 srandom (arg) | |
2045 int arg; | |
2046 { | |
2047 srand (arg); | |
2048 } | |
2049 | |
2050 #endif /* USG */ | |
2051 | |
2052 #ifdef BSD4_1 | |
2053 long random () | |
2054 { | |
2055 /* Arrange to return a range centered on zero. */ | |
2056 return (rand () << 15) + rand () - (1 << 29); | |
2057 } | |
2058 | |
2059 srandom (arg) | |
2060 int arg; | |
2061 { | |
2062 srand (arg); | |
2063 } | |
2064 #endif /* BSD4_1 */ | |
2065 | |
2066 #ifdef WRONG_NAME_INSQUE | |
2067 | |
2068 insque (q,p) | |
2069 caddr_t q,p; | |
2070 { | |
2071 _insque (q,p); | |
2072 } | |
2073 | |
2074 #endif | |
2075 | |
2076 #ifdef VMS | |
2077 | |
2078 #ifdef getenv | |
2079 /* If any place else asks for the TERM variable, | |
2080 allow it to be overridden with the EMACS_TERM variable | |
2081 before attempting to translate the logical name TERM. As a last | |
2082 resort, ask for VAX C's special idea of the TERM variable. */ | |
2083 #undef getenv | |
2084 char * | |
2085 sys_getenv (name) | |
2086 char *name; | |
2087 { | |
2088 register char *val; | |
2089 static char buf[256]; | |
2090 static struct dsc$descriptor_s equiv | |
2091 = {sizeof (buf), DSC$K_DTYPE_T, DSC$K_CLASS_S, buf}; | |
2092 static struct dsc$descriptor_s d_name | |
2093 = {0, DSC$K_DTYPE_T, DSC$K_CLASS_S, 0}; | |
2094 short eqlen; | |
2095 | |
2096 if (!strcmp (name, "TERM")) | |
2097 { | |
2098 val = (char *) getenv ("EMACS_TERM"); | |
2099 if (val) | |
2100 return val; | |
2101 } | |
2102 | |
2103 d_name.dsc$w_length = strlen (name); | |
2104 d_name.dsc$a_pointer = name; | |
2105 if (lib$sys_trnlog (&d_name, &eqlen, &equiv) == 1) | |
2106 { | |
2107 char *str = (char *) xmalloc (eqlen + 1); | |
2108 bcopy (buf, str, eqlen); | |
2109 str[eqlen] = '\0'; | |
2110 /* This is a storage leak, but a pain to fix. With luck, | |
2111 no one will ever notice. */ | |
2112 return str; | |
2113 } | |
2114 return (char *) getenv (name); | |
2115 } | |
2116 #endif /* getenv */ | |
2117 | |
2118 #ifdef abort | |
2119 /* Since VMS doesn't believe in core dumps, the only way to debug this beast is | |
2120 to force a call on the debugger from within the image. */ | |
2121 #undef abort | |
2122 sys_abort () | |
2123 { | |
2124 reset_sys_modes (); | |
2125 LIB$SIGNAL (SS$_DEBUG); | |
2126 } | |
2127 #endif /* abort */ | |
2128 #endif /* VMS */ | |
2129 | |
2130 #ifdef VMS | |
2131 #ifdef LINK_CRTL_SHARE | |
2132 #ifdef SHAREABLE_LIB_BUG | |
2133 /* Variables declared noshare and initialized in shareable libraries | |
2134 cannot be shared. The VMS linker incorrectly forces you to use a private | |
2135 version which is uninitialized... If not for this "feature", we | |
2136 could use the C library definition of sys_nerr and sys_errlist. */ | |
2137 int sys_nerr = 35; | |
2138 char *sys_errlist[] = | |
2139 { | |
2140 "error 0", | |
2141 "not owner", | |
2142 "no such file or directory", | |
2143 "no such process", | |
2144 "interrupted system call", | |
2145 "i/o error", | |
2146 "no such device or address", | |
2147 "argument list too long", | |
2148 "exec format error", | |
2149 "bad file number", | |
2150 "no child process", | |
2151 "no more processes", | |
2152 "not enough memory", | |
2153 "permission denied", | |
2154 "bad address", | |
2155 "block device required", | |
2156 "mount devices busy", | |
2157 "file exists", | |
2158 "cross-device link", | |
2159 "no such device", | |
2160 "not a directory", | |
2161 "is a directory", | |
2162 "invalid argument", | |
2163 "file table overflow", | |
2164 "too many open files", | |
2165 "not a typewriter", | |
2166 "text file busy", | |
2167 "file too big", | |
2168 "no space left on device", | |
2169 "illegal seek", | |
2170 "read-only file system", | |
2171 "too many links", | |
2172 "broken pipe", | |
2173 "math argument", | |
2174 "result too large", | |
2175 "I/O stream empty", | |
2176 "vax/vms specific error code nontranslatable error" | |
2177 }; | |
2178 #endif /* SHAREABLE_LIB_BUG */ | |
2179 #endif /* LINK_CRTL_SHARE */ | |
2180 #endif /* VMS */ | |
2181 | |
2182 #ifdef INTERRUPTIBLE_OPEN | |
2183 | |
2184 int | |
2185 /* VARARGS 2 */ | |
2186 sys_open (path, oflag, mode) | |
2187 char *path; | |
2188 int oflag, mode; | |
2189 { | |
2190 register int rtnval; | |
2191 | |
2192 while ((rtnval = open (path, oflag, mode)) == -1 | |
2193 && (errno == EINTR)); | |
2194 return (rtnval); | |
2195 } | |
2196 | |
2197 #endif /* INTERRUPTIBLE_OPEN */ | |
2198 | |
2199 #ifdef INTERRUPTIBLE_CLOSE | |
2200 | |
2201 sys_close (fd) | |
2202 int fd; | |
2203 { | |
2204 register int rtnval; | |
2205 | |
2206 while ((rtnval = close (fd)) == -1 | |
2207 && (errno == EINTR)); | |
2208 return rtnval; | |
2209 } | |
2210 | |
2211 #endif /* INTERRUPTIBLE_CLOSE */ | |
2212 | |
2213 #ifdef INTERRUPTIBLE_IO | |
2214 | |
2215 int | |
2216 sys_read (fildes, buf, nbyte) | |
2217 int fildes; | |
2218 char *buf; | |
2219 unsigned int nbyte; | |
2220 { | |
2221 register int rtnval; | |
2222 | |
2223 while ((rtnval = read (fildes, buf, nbyte)) == -1 | |
2224 && (errno == EINTR)); | |
2225 return (rtnval); | |
2226 } | |
2227 | |
2228 int | |
2229 sys_write (fildes, buf, nbyte) | |
2230 int fildes; | |
2231 char *buf; | |
2232 unsigned int nbyte; | |
2233 { | |
2234 register int rtnval; | |
2235 | |
2236 while ((rtnval = write (fildes, buf, nbyte)) == -1 | |
2237 && (errno == EINTR)); | |
2238 return (rtnval); | |
2239 } | |
2240 | |
2241 #endif /* INTERRUPTIBLE_IO */ | |
2242 | |
2243 #ifdef USG | |
2244 /* | |
2245 * All of the following are for USG. | |
2246 * | |
2247 * On USG systems the system calls are INTERRUPTIBLE by signals | |
2248 * that the user program has elected to catch. Thus the system call | |
2249 * must be retried in these cases. To handle this without massive | |
2250 * changes in the source code, we remap the standard system call names | |
2251 * to names for our own functions in sysdep.c that do the system call | |
2252 * with retries. Actually, for portability reasons, it is good | |
2253 * programming practice, as this example shows, to limit all actual | |
2254 * system calls to a single occurance in the source. Sure, this | |
2255 * adds an extra level of function call overhead but it is almost | |
2256 * always negligible. Fred Fish, Unisoft Systems Inc. | |
2257 */ | |
2258 | |
2259 char *sys_siglist[NSIG + 1] = | |
2260 { | |
2261 #ifdef AIX | |
2262 /* AIX has changed the signals a bit */ | |
2263 "bogus signal", /* 0 */ | |
2264 "hangup", /* 1 SIGHUP */ | |
2265 "interrupt", /* 2 SIGINT */ | |
2266 "quit", /* 3 SIGQUIT */ | |
2267 "illegal instruction", /* 4 SIGILL */ | |
2268 "trace trap", /* 5 SIGTRAP */ | |
2269 "IOT instruction", /* 6 SIGIOT */ | |
2270 "crash likely", /* 7 SIGDANGER */ | |
2271 "floating point exception", /* 8 SIGFPE */ | |
2272 "kill", /* 9 SIGKILL */ | |
2273 "bus error", /* 10 SIGBUS */ | |
2274 "segmentation violation", /* 11 SIGSEGV */ | |
2275 "bad argument to system call", /* 12 SIGSYS */ | |
2276 "write on a pipe with no one to read it", /* 13 SIGPIPE */ | |
2277 "alarm clock", /* 14 SIGALRM */ | |
2278 "software termination signum", /* 15 SIGTERM */ | |
2279 "user defined signal 1", /* 16 SIGUSR1 */ | |
2280 "user defined signal 2", /* 17 SIGUSR2 */ | |
2281 "death of a child", /* 18 SIGCLD */ | |
2282 "power-fail restart", /* 19 SIGPWR */ | |
2283 "bogus signal", /* 20 */ | |
2284 "bogus signal", /* 21 */ | |
2285 "bogus signal", /* 22 */ | |
2286 "bogus signal", /* 23 */ | |
2287 "bogus signal", /* 24 */ | |
2288 "LAN I/O interrupt", /* 25 SIGAIO */ | |
2289 "PTY I/O interrupt", /* 26 SIGPTY */ | |
2290 "I/O intervention required", /* 27 SIGIOINT */ | |
2291 "HFT grant", /* 28 SIGGRANT */ | |
2292 "HFT retract", /* 29 SIGRETRACT */ | |
2293 "HFT sound done", /* 30 SIGSOUND */ | |
2294 "HFT input ready", /* 31 SIGMSG */ | |
2295 #else /* not AIX */ | |
2296 "bogus signal", /* 0 */ | |
2297 "hangup", /* 1 SIGHUP */ | |
2298 "interrupt", /* 2 SIGINT */ | |
2299 "quit", /* 3 SIGQUIT */ | |
2300 "illegal instruction", /* 4 SIGILL */ | |
2301 "trace trap", /* 5 SIGTRAP */ | |
2302 "IOT instruction", /* 6 SIGIOT */ | |
2303 "EMT instruction", /* 7 SIGEMT */ | |
2304 "floating point exception", /* 8 SIGFPE */ | |
2305 "kill", /* 9 SIGKILL */ | |
2306 "bus error", /* 10 SIGBUS */ | |
2307 "segmentation violation", /* 11 SIGSEGV */ | |
2308 "bad argument to system call", /* 12 SIGSYS */ | |
2309 "write on a pipe with no one to read it", /* 13 SIGPIPE */ | |
2310 "alarm clock", /* 14 SIGALRM */ | |
2311 "software termination signum", /* 15 SIGTERM */ | |
2312 "user defined signal 1", /* 16 SIGUSR1 */ | |
2313 "user defined signal 2", /* 17 SIGUSR2 */ | |
2314 "death of a child", /* 18 SIGCLD */ | |
2315 "power-fail restart", /* 19 SIGPWR */ | |
2316 #endif /* not AIX */ | |
2317 0 | |
2318 }; | |
2319 | |
2320 /* | |
2321 * Warning, this function may not duplicate 4.2 action properly | |
2322 * under error conditions. | |
2323 */ | |
2324 | |
2325 #ifndef MAXPATHLEN | |
2326 /* In 4.1, param.h fails to define this. */ | |
2327 #define MAXPATHLEN 1024 | |
2328 #endif | |
2329 | |
2330 #ifndef HAVE_GETWD | |
2331 | |
2332 char * | |
2333 getwd (pathname) | |
2334 char *pathname; | |
2335 { | |
2336 char *npath, *spath; | |
2337 extern char *getcwd (); | |
2338 | |
2339 spath = npath = getcwd ((char *) 0, MAXPATHLEN); | |
2340 /* On Altos 3068, getcwd can return @hostname/dir, so discard | |
2341 up to first slash. Should be harmless on other systems. */ | |
2342 while (*npath && *npath != '/') | |
2343 npath++; | |
2344 strcpy (pathname, npath); | |
2345 free (spath); /* getcwd uses malloc */ | |
2346 return pathname; | |
2347 } | |
2348 | |
2349 #endif /* HAVE_GETWD */ | |
2350 | |
2351 /* | |
2352 * Emulate rename using unlink/link. Note that this is | |
2353 * only partially correct. Also, doesn't enforce restriction | |
2354 * that files be of same type (regular->regular, dir->dir, etc). | |
2355 */ | |
2356 | |
621 | 2357 #ifndef HAVE_RENAME |
2358 | |
491 | 2359 rename (from, to) |
2360 char *from; | |
2361 char *to; | |
2362 { | |
2363 if (access (from, 0) == 0) | |
2364 { | |
2365 unlink (to); | |
2366 if (link (from, to) == 0) | |
2367 if (unlink (from) == 0) | |
2368 return (0); | |
2369 } | |
2370 return (-1); | |
2371 } | |
2372 | |
621 | 2373 #endif |
2374 | |
491 | 2375 #ifndef HAVE_VFORK |
2376 | |
2377 /* | |
2378 * Substitute fork for vfork on USG flavors. | |
2379 */ | |
2380 | |
2381 vfork () | |
2382 { | |
2383 return (fork ()); | |
2384 } | |
2385 | |
2386 #endif /* not HAVE_VFORK */ | |
2387 | |
2388 #ifdef MISSING_UTIMES | |
2389 | |
2390 /* HPUX (among others) sets HAVE_TIMEVAL but does not implement utimes. */ | |
2391 | |
2392 utimes () | |
2393 { | |
2394 } | |
2395 #endif | |
2396 | |
2397 #ifdef IRIS_UTIME | |
2398 | |
2399 /* The IRIS (3.5) has timevals, but uses sys V utime, and doesn't have the | |
2400 utimbuf structure defined anywhere but in the man page. */ | |
2401 | |
2402 struct utimbuf | |
2403 { | |
2404 long actime; | |
2405 long modtime; | |
2406 }; | |
2407 | |
2408 utimes (name, tvp) | |
2409 char *name; | |
2410 struct timeval tvp[]; | |
2411 { | |
2412 struct utimbuf utb; | |
2413 utb.actime = tvp[0].tv_sec; | |
2414 utb.modtime = tvp[1].tv_sec; | |
2415 utime (name, &utb); | |
2416 } | |
2417 #endif /* IRIS_UTIME */ | |
2418 | |
2419 | |
2420 #ifdef HPUX | |
2421 #ifndef HAVE_PERROR | |
2422 | |
2423 /* HPUX curses library references perror, but as far as we know | |
2424 it won't be called. Anyway this definition will do for now. */ | |
2425 | |
2426 perror () | |
2427 { | |
2428 } | |
2429 | |
2430 #endif /* not HAVE_PERROR */ | |
2431 #endif /* HPUX */ | |
2432 | |
2433 #ifndef HAVE_DUP2 | |
2434 | |
2435 /* | |
2436 * Emulate BSD dup2. First close newd if it already exists. | |
2437 * Then, attempt to dup oldd. If not successful, call dup2 recursively | |
2438 * until we are, then close the unsuccessful ones. | |
2439 */ | |
2440 | |
2441 dup2 (oldd, newd) | |
2442 int oldd; | |
2443 int newd; | |
2444 { | |
2445 register int fd, ret; | |
2446 | |
2447 sys_close (newd); | |
2448 | |
2449 #ifdef F_DUPFD | |
2450 fd = fcntl (oldd, F_DUPFD, newd); | |
2451 if (fd != newd) | |
2452 error ("can't dup2 (%i,%i) : %s", oldd, newd, sys_errlist[errno]); | |
2453 #else | |
2454 fd = dup (old); | |
2455 if (fd == -1) | |
2456 return -1; | |
2457 if (fd == new) | |
2458 return new; | |
2459 ret = dup2 (old,new); | |
2460 sys_close (fd); | |
2461 return ret; | |
2462 #endif | |
2463 } | |
2464 | |
2465 #endif /* not HAVE_DUP2 */ | |
2466 | |
2467 /* | |
2468 * Gettimeofday. Simulate as much as possible. Only accurate | |
2469 * to nearest second. Emacs doesn't use tzp so ignore it for now. | |
2470 * Only needed when subprocesses are defined. | |
2471 */ | |
2472 | |
2473 #ifdef subprocesses | |
2474 #ifndef VMS | |
2475 #ifndef HAVE_GETTIMEOFDAY | |
2476 #ifdef HAVE_TIMEVAL | |
2477 | |
2478 /* ARGSUSED */ | |
2479 gettimeofday (tp, tzp) | |
2480 struct timeval *tp; | |
2481 struct timezone *tzp; | |
2482 { | |
2483 extern long time (); | |
2484 | |
2485 tp->tv_sec = time ((long *)0); | |
2486 tp->tv_usec = 0; | |
2487 tzp->tz_minuteswest = -1; | |
2488 } | |
2489 | |
2490 #endif | |
2491 #endif | |
2492 #endif | |
2493 #endif /* subprocess && !HAVE_GETTIMEOFDAY && HAVE_TIMEVAL && !VMS */ | |
2494 | |
2495 /* | |
2496 * This function will go away as soon as all the stubs fixed. (fnf) | |
2497 */ | |
2498 | |
2499 croak (badfunc) | |
2500 char *badfunc; | |
2501 { | |
2502 printf ("%s not yet implemented\r\n", badfunc); | |
2503 reset_sys_modes (); | |
2504 exit (1); | |
2505 } | |
2506 | |
2507 #endif /* USG */ | |
2508 | |
2509 #ifdef DGUX | |
2510 | |
2511 char *sys_siglist[NSIG + 1] = | |
2512 { | |
2513 "null signal", /* 0 SIGNULL */ | |
2514 "hangup", /* 1 SIGHUP */ | |
2515 "interrupt", /* 2 SIGINT */ | |
2516 "quit", /* 3 SIGQUIT */ | |
2517 "illegal instruction", /* 4 SIGILL */ | |
2518 "trace trap", /* 5 SIGTRAP */ | |
2519 "abort termination", /* 6 SIGABRT */ | |
2520 "SIGEMT", /* 7 SIGEMT */ | |
2521 "floating point exception", /* 8 SIGFPE */ | |
2522 "kill", /* 9 SIGKILL */ | |
2523 "bus error", /* 10 SIGBUS */ | |
2524 "segmentation violation", /* 11 SIGSEGV */ | |
2525 "bad argument to system call", /* 12 SIGSYS */ | |
2526 "write on a pipe with no reader", /* 13 SIGPIPE */ | |
2527 "alarm clock", /* 14 SIGALRM */ | |
2528 "software termination signal", /* 15 SIGTERM */ | |
2529 "user defined signal 1", /* 16 SIGUSR1 */ | |
2530 "user defined signal 2", /* 17 SIGUSR2 */ | |
2531 "child stopped or terminated", /* 18 SIGCLD */ | |
2532 "power-fail restart", /* 19 SIGPWR */ | |
2533 "window size changed", /* 20 SIGWINCH */ | |
2534 "undefined", /* 21 */ | |
2535 "pollable event occured", /* 22 SIGPOLL */ | |
2536 "sendable stop signal not from tty", /* 23 SIGSTOP */ | |
2537 "stop signal from tty", /* 24 SIGSTP */ | |
2538 "continue a stopped process", /* 25 SIGCONT */ | |
2539 "attempted background tty read", /* 26 SIGTTIN */ | |
2540 "attempted background tty write", /* 27 SIGTTOU */ | |
2541 "undefined", /* 28 */ | |
2542 "undefined", /* 29 */ | |
2543 "undefined", /* 30 */ | |
2544 "undefined", /* 31 */ | |
2545 "undefined", /* 32 */ | |
2546 "socket (TCP/IP) urgent data arrival", /* 33 SIGURG */ | |
2547 "I/O is possible", /* 34 SIGIO */ | |
2548 "exceeded cpu time limit", /* 35 SIGXCPU */ | |
2549 "exceeded file size limit", /* 36 SIGXFSZ */ | |
2550 "virtual time alarm", /* 37 SIGVTALRM */ | |
2551 "profiling time alarm", /* 38 SIGPROF */ | |
2552 "undefined", /* 39 */ | |
2553 "file record locks revoked", /* 40 SIGLOST */ | |
2554 "undefined", /* 41 */ | |
2555 "undefined", /* 42 */ | |
2556 "undefined", /* 43 */ | |
2557 "undefined", /* 44 */ | |
2558 "undefined", /* 45 */ | |
2559 "undefined", /* 46 */ | |
2560 "undefined", /* 47 */ | |
2561 "undefined", /* 48 */ | |
2562 "undefined", /* 49 */ | |
2563 "undefined", /* 50 */ | |
2564 "undefined", /* 51 */ | |
2565 "undefined", /* 52 */ | |
2566 "undefined", /* 53 */ | |
2567 "undefined", /* 54 */ | |
2568 "undefined", /* 55 */ | |
2569 "undefined", /* 56 */ | |
2570 "undefined", /* 57 */ | |
2571 "undefined", /* 58 */ | |
2572 "undefined", /* 59 */ | |
2573 "undefined", /* 60 */ | |
2574 "undefined", /* 61 */ | |
2575 "undefined", /* 62 */ | |
2576 "undefined", /* 63 */ | |
2577 "notification message in mess. queue", /* 64 SIGDGNOTIFY */ | |
2578 0 | |
2579 }; | |
2580 | |
2581 #endif /* DGUX */ | |
2582 | |
2583 /* Directory routines for systems that don't have them. */ | |
2584 | |
2585 #ifdef SYSV_SYSTEM_DIR | |
2586 | |
2587 #include <dirent.h> | |
2588 | |
2589 #ifndef AIX | |
2590 int | |
2591 closedir (dirp) | |
2592 register DIR *dirp; /* stream from opendir */ | |
2593 { | |
2594 sys_close (dirp->dd_fd); | |
2595 free ((char *) dirp->dd_buf); /* directory block defined in <dirent.h> */ | |
2596 free ((char *) dirp); | |
2597 } | |
2598 #endif /* not AIX */ | |
2599 #endif /* SYSV_SYSTEM_DIR */ | |
2600 | |
2601 #ifdef NONSYSTEM_DIR_LIBRARY | |
2602 | |
2603 DIR * | |
2604 opendir (filename) | |
2605 char *filename; /* name of directory */ | |
2606 { | |
2607 register DIR *dirp; /* -> malloc'ed storage */ | |
2608 register int fd; /* file descriptor for read */ | |
2609 struct stat sbuf; /* result of fstat */ | |
2610 | |
2611 fd = sys_open (filename, 0); | |
2612 if (fd < 0) | |
2613 return 0; | |
2614 | |
2615 if (fstat (fd, &sbuf) < 0 | |
2616 || (sbuf.st_mode & S_IFMT) != S_IFDIR | |
2617 || (dirp = (DIR *) malloc (sizeof (DIR))) == 0) | |
2618 { | |
2619 sys_close (fd); | |
2620 return 0; /* bad luck today */ | |
2621 } | |
2622 | |
2623 dirp->dd_fd = fd; | |
2624 dirp->dd_loc = dirp->dd_size = 0; /* refill needed */ | |
2625 | |
2626 return dirp; | |
2627 } | |
2628 | |
2629 void | |
2630 closedir (dirp) | |
2631 register DIR *dirp; /* stream from opendir */ | |
2632 { | |
2633 sys_close (dirp->dd_fd); | |
2634 free ((char *) dirp); | |
2635 } | |
2636 | |
2637 | |
2638 #ifndef VMS | |
2639 #define DIRSIZ 14 | |
2640 struct olddir | |
2641 { | |
2642 ino_t od_ino; /* inode */ | |
2643 char od_name[DIRSIZ]; /* filename */ | |
2644 }; | |
2645 #endif /* not VMS */ | |
2646 | |
2647 struct direct dir_static; /* simulated directory contents */ | |
2648 | |
2649 /* ARGUSED */ | |
2650 struct direct * | |
2651 readdir (dirp) | |
2652 register DIR *dirp; /* stream from opendir */ | |
2653 { | |
2654 #ifndef VMS | |
2655 register struct olddir *dp; /* -> directory data */ | |
2656 #else /* VMS */ | |
2657 register struct dir$_name *dp; /* -> directory data */ | |
2658 register struct dir$_version *dv; /* -> version data */ | |
2659 #endif /* VMS */ | |
2660 | |
2661 for (; ;) | |
2662 { | |
2663 if (dirp->dd_loc >= dirp->dd_size) | |
2664 dirp->dd_loc = dirp->dd_size = 0; | |
2665 | |
2666 if (dirp->dd_size == 0 /* refill buffer */ | |
2667 && (dirp->dd_size = sys_read (dirp->dd_fd, dirp->dd_buf, DIRBLKSIZ)) <= 0) | |
2668 return 0; | |
2669 | |
2670 #ifndef VMS | |
2671 dp = (struct olddir *) &dirp->dd_buf[dirp->dd_loc]; | |
2672 dirp->dd_loc += sizeof (struct olddir); | |
2673 | |
2674 if (dp->od_ino != 0) /* not deleted entry */ | |
2675 { | |
2676 dir_static.d_ino = dp->od_ino; | |
2677 strncpy (dir_static.d_name, dp->od_name, DIRSIZ); | |
2678 dir_static.d_name[DIRSIZ] = '\0'; | |
2679 dir_static.d_namlen = strlen (dir_static.d_name); | |
2680 dir_static.d_reclen = sizeof (struct direct) | |
2681 - MAXNAMLEN + 3 | |
2682 + dir_static.d_namlen - dir_static.d_namlen % 4; | |
2683 return &dir_static; /* -> simulated structure */ | |
2684 } | |
2685 #else /* VMS */ | |
2686 dp = (struct dir$_name *) dirp->dd_buf; | |
2687 if (dirp->dd_loc == 0) | |
2688 dirp->dd_loc = (dp->dir$b_namecount&1) ? dp->dir$b_namecount + 1 | |
2689 : dp->dir$b_namecount; | |
2690 dv = (struct dir$_version *)&dp->dir$t_name[dirp->dd_loc]; | |
2691 dir_static.d_ino = dv->dir$w_fid_num; | |
2692 dir_static.d_namlen = dp->dir$b_namecount; | |
2693 dir_static.d_reclen = sizeof (struct direct) | |
2694 - MAXNAMLEN + 3 | |
2695 + dir_static.d_namlen - dir_static.d_namlen % 4; | |
2696 strncpy (dir_static.d_name, dp->dir$t_name, dp->dir$b_namecount); | |
2697 dir_static.d_name[dir_static.d_namlen] = '\0'; | |
2698 dirp->dd_loc = dirp->dd_size; /* only one record at a time */ | |
2699 return &dir_static; | |
2700 #endif /* VMS */ | |
2701 } | |
2702 } | |
2703 | |
2704 #ifdef VMS | |
2705 /* readdirver is just like readdir except it returns all versions of a file | |
2706 as separate entries. */ | |
2707 | |
2708 /* ARGUSED */ | |
2709 struct direct * | |
2710 readdirver (dirp) | |
2711 register DIR *dirp; /* stream from opendir */ | |
2712 { | |
2713 register struct dir$_name *dp; /* -> directory data */ | |
2714 register struct dir$_version *dv; /* -> version data */ | |
2715 | |
2716 if (dirp->dd_loc >= dirp->dd_size - sizeof (struct dir$_name)) | |
2717 dirp->dd_loc = dirp->dd_size = 0; | |
2718 | |
2719 if (dirp->dd_size == 0 /* refill buffer */ | |
2720 && (dirp->dd_size = sys_read (dirp->dd_fd, dirp->dd_buf, DIRBLKSIZ)) <= 0) | |
2721 return 0; | |
2722 | |
2723 dp = (struct dir$_name *) dirp->dd_buf; | |
2724 if (dirp->dd_loc == 0) | |
2725 dirp->dd_loc = (dp->dir$b_namecount & 1) ? dp->dir$b_namecount + 1 | |
2726 : dp->dir$b_namecount; | |
2727 dv = (struct dir$_version *) &dp->dir$t_name[dirp->dd_loc]; | |
2728 strncpy (dir_static.d_name, dp->dir$t_name, dp->dir$b_namecount); | |
2729 sprintf (&dir_static.d_name[dp->dir$b_namecount], ";%d", dv->dir$w_version); | |
2730 dir_static.d_namlen = strlen (dir_static.d_name); | |
2731 dir_static.d_ino = dv->dir$w_fid_num; | |
2732 dir_static.d_reclen = sizeof (struct direct) - MAXNAMLEN + 3 | |
2733 + dir_static.d_namlen - dir_static.d_namlen % 4; | |
2734 dirp->dd_loc = ((char *) (++dv) - dp->dir$t_name); | |
2735 return &dir_static; | |
2736 } | |
2737 | |
2738 #endif /* VMS */ | |
2739 | |
2740 #endif /* NONSYSTEM_DIR_LIBRARY */ | |
2741 | |
2742 /* Functions for VMS */ | |
2743 #ifdef VMS | |
579 | 2744 #include "vms-pwd.h" |
491 | 2745 #include <acldef.h> |
2746 #include <chpdef.h> | |
2747 #include <jpidef.h> | |
2748 | |
2749 /* Return as a string the VMS error string pertaining to STATUS. | |
2750 Reuses the same static buffer each time it is called. */ | |
2751 | |
2752 char * | |
2753 vmserrstr (status) | |
2754 int status; /* VMS status code */ | |
2755 { | |
2756 int bufadr[2]; | |
2757 short len; | |
2758 static char buf[257]; | |
2759 | |
2760 bufadr[0] = sizeof buf - 1; | |
2761 bufadr[1] = (int) buf; | |
2762 if (! (SYS$GETMSG (status, &len, bufadr, 0x1, 0) & 1)) | |
2763 return "untranslatable VMS error status"; | |
2764 buf[len] = '\0'; | |
2765 return buf; | |
2766 } | |
2767 | |
2768 #ifdef access | |
2769 #undef access | |
2770 | |
2771 /* The following is necessary because 'access' emulation by VMS C (2.0) does | |
2772 * not work correctly. (It also doesn't work well in version 2.3.) | |
2773 */ | |
2774 | |
2775 #ifdef VMS4_4 | |
2776 | |
2777 #define DESCRIPTOR(name,string) struct dsc$descriptor_s name = \ | |
2778 { strlen (string), DSC$K_DTYPE_T, DSC$K_CLASS_S, string } | |
2779 | |
2780 typedef union { | |
2781 struct { | |
2782 unsigned short s_buflen; | |
2783 unsigned short s_code; | |
2784 char *s_bufadr; | |
2785 unsigned short *s_retlenadr; | |
2786 } s; | |
2787 int end; | |
2788 } item; | |
2789 #define buflen s.s_buflen | |
2790 #define code s.s_code | |
2791 #define bufadr s.s_bufadr | |
2792 #define retlenadr s.s_retlenadr | |
2793 | |
2794 #define R_OK 4 /* test for read permission */ | |
2795 #define W_OK 2 /* test for write permission */ | |
2796 #define X_OK 1 /* test for execute (search) permission */ | |
2797 #define F_OK 0 /* test for presence of file */ | |
2798 | |
2799 int | |
2800 sys_access (path, mode) | |
2801 char *path; | |
2802 int mode; | |
2803 { | |
2804 static char *user = NULL; | |
2805 char dir_fn[512]; | |
2806 | |
2807 /* translate possible directory spec into .DIR file name, so brain-dead | |
2808 * access can treat the directory like a file. */ | |
2809 if (directory_file_name (path, dir_fn)) | |
2810 path = dir_fn; | |
2811 | |
2812 if (mode == F_OK) | |
2813 return access (path, mode); | |
2814 if (user == NULL && (user = (char *) getenv ("USER")) == NULL) | |
2815 return -1; | |
2816 { | |
2817 int stat; | |
2818 int flags; | |
2819 int acces; | |
2820 unsigned short int dummy; | |
2821 item itemlst[3]; | |
2822 static int constant = ACL$C_FILE; | |
2823 DESCRIPTOR (path_desc, path); | |
2824 DESCRIPTOR (user_desc, user); | |
2825 | |
2826 flags = 0; | |
2827 acces = 0; | |
2828 if ((mode & X_OK) && ((stat = access (path, mode)) < 0 || mode == X_OK)) | |
2829 return stat; | |
2830 if (mode & R_OK) | |
2831 acces |= CHP$M_READ; | |
2832 if (mode & W_OK) | |
2833 acces |= CHP$M_WRITE; | |
2834 itemlst[0].buflen = sizeof (int); | |
2835 itemlst[0].code = CHP$_FLAGS; | |
2836 itemlst[0].bufadr = (char *) &flags; | |
2837 itemlst[0].retlenadr = &dummy; | |
2838 itemlst[1].buflen = sizeof (int); | |
2839 itemlst[1].code = CHP$_ACCESS; | |
2840 itemlst[1].bufadr = (char *) &acces; | |
2841 itemlst[1].retlenadr = &dummy; | |
2842 itemlst[2].end = CHP$_END; | |
2843 stat = SYS$CHECK_ACCESS (&constant, &path_desc, &user_desc, itemlst); | |
2844 return stat == SS$_NORMAL ? 0 : -1; | |
2845 } | |
2846 } | |
2847 | |
2848 #else /* not VMS4_4 */ | |
2849 | |
2850 #include <prvdef.h> | |
2851 #define ACE$M_WRITE 2 | |
2852 #define ACE$C_KEYID 1 | |
2853 | |
2854 static unsigned short memid, grpid; | |
2855 static unsigned int uic; | |
2856 | |
2857 /* Called from init_sys_modes, so it happens not very often | |
2858 but at least each time Emacs is loaded. */ | |
2859 sys_access_reinit () | |
2860 { | |
2861 uic = 0; | |
2862 } | |
2863 | |
2864 int | |
2865 sys_access (filename, type) | |
2866 char * filename; | |
2867 int type; | |
2868 { | |
2869 struct FAB fab; | |
2870 struct XABPRO xab; | |
2871 int status, size, i, typecode, acl_controlled; | |
2872 unsigned int *aclptr, *aclend, aclbuf[60]; | |
2873 union prvdef prvmask; | |
2874 | |
2875 /* Get UIC and GRP values for protection checking. */ | |
2876 if (uic == 0) | |
2877 { | |
2878 status = LIB$GETJPI (&JPI$_UIC, 0, 0, &uic, 0, 0); | |
2879 if (! (status & 1)) | |
2880 return -1; | |
2881 memid = uic & 0xFFFF; | |
2882 grpid = uic >> 16; | |
2883 } | |
2884 | |
2885 if (type != 2) /* not checking write access */ | |
2886 return access (filename, type); | |
2887 | |
2888 /* Check write protection. */ | |
2889 | |
2890 #define CHECKPRIV(bit) (prvmask.bit) | |
2891 #define WRITEABLE(field) (! ((xab.xab$w_pro >> field) & XAB$M_NOWRITE)) | |
2892 | |
2893 /* Find privilege bits */ | |
2894 status = sys$setprv (0, 0, 0, prvmask); | |
2895 if (! (status & 1)) | |
2896 error ("Unable to find privileges: %s", vmserrstr (status)); | |
2897 if (CHECKPRIV (PRV$V_BYPASS)) | |
2898 return 0; /* BYPASS enabled */ | |
2899 fab = cc$rms_fab; | |
2900 fab.fab$b_fac = FAB$M_GET; | |
2901 fab.fab$l_fna = filename; | |
2902 fab.fab$b_fns = strlen (filename); | |
2903 fab.fab$l_xab = &xab; | |
2904 xab = cc$rms_xabpro; | |
2905 xab.xab$l_aclbuf = aclbuf; | |
2906 xab.xab$w_aclsiz = sizeof (aclbuf); | |
2907 status = sys$open (&fab, 0, 0); | |
2908 if (! (status & 1)) | |
2909 return -1; | |
2910 sys$close (&fab, 0, 0); | |
2911 /* Check system access */ | |
2912 if (CHECKPRIV (PRV$V_SYSPRV) && WRITEABLE (XAB$V_SYS)) | |
2913 return 0; | |
2914 /* Check ACL entries, if any */ | |
2915 acl_controlled = 0; | |
2916 if (xab.xab$w_acllen > 0) | |
2917 { | |
2918 aclptr = aclbuf; | |
2919 aclend = &aclbuf[xab.xab$w_acllen / 4]; | |
2920 while (*aclptr && aclptr < aclend) | |
2921 { | |
2922 size = (*aclptr & 0xff) / 4; | |
2923 typecode = (*aclptr >> 8) & 0xff; | |
2924 if (typecode == ACE$C_KEYID) | |
2925 for (i = size - 1; i > 1; i--) | |
2926 if (aclptr[i] == uic) | |
2927 { | |
2928 acl_controlled = 1; | |
2929 if (aclptr[1] & ACE$M_WRITE) | |
2930 return 0; /* Write access through ACL */ | |
2931 } | |
2932 aclptr = &aclptr[size]; | |
2933 } | |
2934 if (acl_controlled) /* ACL specified, prohibits write access */ | |
2935 return -1; | |
2936 } | |
2937 /* No ACL entries specified, check normal protection */ | |
2938 if (WRITEABLE (XAB$V_WLD)) /* World writeable */ | |
2939 return 0; | |
2940 if (WRITEABLE (XAB$V_GRP) && | |
2941 (unsigned short) (xab.xab$l_uic >> 16) == grpid) | |
2942 return 0; /* Group writeable */ | |
2943 if (WRITEABLE (XAB$V_OWN) && | |
2944 (xab.xab$l_uic & 0xFFFF) == memid) | |
2945 return 0; /* Owner writeable */ | |
2946 | |
2947 return -1; /* Not writeable */ | |
2948 } | |
2949 #endif /* not VMS4_4 */ | |
2950 #endif /* access */ | |
2951 | |
2952 static char vtbuf[NAM$C_MAXRSS+1]; | |
2953 | |
2954 /* translate a vms file spec to a unix path */ | |
2955 char * | |
2956 sys_translate_vms (vfile) | |
2957 char * vfile; | |
2958 { | |
2959 char * p; | |
2960 char * targ; | |
2961 | |
2962 if (!vfile) | |
2963 return 0; | |
2964 | |
2965 targ = vtbuf; | |
2966 | |
2967 /* leading device or logical name is a root directory */ | |
2968 if (p = strchr (vfile, ':')) | |
2969 { | |
2970 *targ++ = '/'; | |
2971 while (vfile < p) | |
2972 *targ++ = *vfile++; | |
2973 vfile++; | |
2974 *targ++ = '/'; | |
2975 } | |
2976 p = vfile; | |
2977 if (*p == '[' || *p == '<') | |
2978 { | |
2979 while (*++vfile != *p + 2) | |
2980 switch (*vfile) | |
2981 { | |
2982 case '.': | |
2983 if (vfile[-1] == *p) | |
2984 *targ++ = '.'; | |
2985 *targ++ = '/'; | |
2986 break; | |
2987 | |
2988 case '-': | |
2989 *targ++ = '.'; | |
2990 *targ++ = '.'; | |
2991 break; | |
2992 | |
2993 default: | |
2994 *targ++ = *vfile; | |
2995 break; | |
2996 } | |
2997 vfile++; | |
2998 *targ++ = '/'; | |
2999 } | |
3000 while (*vfile) | |
3001 *targ++ = *vfile++; | |
3002 | |
3003 return vtbuf; | |
3004 } | |
3005 | |
3006 static char utbuf[NAM$C_MAXRSS+1]; | |
3007 | |
3008 /* translate a unix path to a VMS file spec */ | |
3009 char * | |
3010 sys_translate_unix (ufile) | |
3011 char * ufile; | |
3012 { | |
3013 int slash_seen = 0; | |
3014 char *p; | |
3015 char * targ; | |
3016 | |
3017 if (!ufile) | |
3018 return 0; | |
3019 | |
3020 targ = utbuf; | |
3021 | |
3022 if (*ufile == '/') | |
3023 { | |
3024 ufile++; | |
3025 } | |
3026 | |
3027 while (*ufile) | |
3028 { | |
3029 switch (*ufile) | |
3030 { | |
3031 case '/': | |
3032 if (slash_seen) | |
3033 if (index (&ufile[1], '/')) | |
3034 *targ++ = '.'; | |
3035 else | |
3036 *targ++ = ']'; | |
3037 else | |
3038 { | |
3039 *targ++ = ':'; | |
3040 if (index (&ufile[1], '/')) | |
3041 *targ++ = '['; | |
3042 slash_seen = 1; | |
3043 } | |
3044 break; | |
3045 | |
3046 case '.': | |
3047 if (strncmp (ufile, "./", 2) == 0) | |
3048 { | |
3049 if (!slash_seen) | |
3050 { | |
3051 *targ++ = '['; | |
3052 slash_seen = 1; | |
3053 } | |
3054 ufile++; /* skip the dot */ | |
3055 if (index (&ufile[1], '/')) | |
3056 *targ++ = '.'; | |
3057 else | |
3058 *targ++ = ']'; | |
3059 } | |
3060 else if (strncmp (ufile, "../", 3) == 0) | |
3061 { | |
3062 if (!slash_seen) | |
3063 { | |
3064 *targ++ = '['; | |
3065 slash_seen = 1; | |
3066 } | |
3067 *targ++ = '-'; | |
3068 ufile += 2; /* skip the dots */ | |
3069 if (index (&ufile[1], '/')) | |
3070 *targ++ = '.'; | |
3071 else | |
3072 *targ++ = ']'; | |
3073 } | |
3074 else | |
3075 *targ++ = *ufile; | |
3076 break; | |
3077 | |
3078 default: | |
3079 *targ++ = *ufile; | |
3080 break; | |
3081 } | |
3082 ufile++; | |
3083 } | |
3084 *targ = '\0'; | |
3085 | |
3086 return utbuf; | |
3087 } | |
3088 | |
3089 char * | |
3090 getwd (pathname) | |
3091 char *pathname; | |
3092 { | |
3093 char *ptr; | |
3094 strcpy (pathname, egetenv ("PATH")); | |
3095 | |
3096 ptr = pathname; | |
3097 while (*ptr) | |
3098 { | |
3099 if ('a' <= *ptr && *ptr <= 'z') | |
3100 *ptr -= 040; | |
3101 ptr++; | |
3102 } | |
3103 return pathname; | |
3104 } | |
3105 | |
3106 getppid () | |
3107 { | |
3108 long item_code = JPI$_OWNER; | |
3109 unsigned long parent_id; | |
3110 int status; | |
3111 | |
3112 if (((status = LIB$GETJPI (&item_code, 0, 0, &parent_id)) & 1) == 0) | |
3113 { | |
3114 errno = EVMSERR; | |
3115 vaxc$errno = status; | |
3116 return -1; | |
3117 } | |
3118 return parent_id; | |
3119 } | |
3120 | |
3121 #undef getuid | |
3122 unsigned | |
3123 sys_getuid () | |
3124 { | |
3125 return (getgid () << 16) | getuid (); | |
3126 } | |
3127 | |
3128 int | |
3129 sys_read (fildes, buf, nbyte) | |
3130 int fildes; | |
3131 char *buf; | |
3132 unsigned int nbyte; | |
3133 { | |
3134 return read (fildes, buf, (nbyte < MAXIOSIZE ? nbyte : MAXIOSIZE)); | |
3135 } | |
3136 | |
3137 #if 0 | |
3138 int | |
3139 sys_write (fildes, buf, nbyte) | |
3140 int fildes; | |
3141 char *buf; | |
3142 unsigned int nbyte; | |
3143 { | |
3144 register int nwrote, rtnval = 0; | |
3145 | |
3146 while (nbyte > MAXIOSIZE && (nwrote = write (fildes, buf, MAXIOSIZE)) > 0) { | |
3147 nbyte -= nwrote; | |
3148 buf += nwrote; | |
3149 rtnval += nwrote; | |
3150 } | |
3151 if (nwrote < 0) | |
3152 return rtnval ? rtnval : -1; | |
3153 if ((nwrote = write (fildes, buf, nbyte)) < 0) | |
3154 return rtnval ? rtnval : -1; | |
3155 return (rtnval + nwrote); | |
3156 } | |
3157 #endif /* 0 */ | |
3158 | |
3159 /* | |
3160 * VAX/VMS VAX C RTL really loses. It insists that records | |
3161 * end with a newline (carriage return) character, and if they | |
3162 * don't it adds one (nice of it isn't it!) | |
3163 * | |
3164 * Thus we do this stupidity below. | |
3165 */ | |
3166 | |
3167 int | |
3168 sys_write (fildes, buf, nbytes) | |
3169 int fildes; | |
3170 char *buf; | |
3171 unsigned int nbytes; | |
3172 { | |
3173 register char *p; | |
3174 register char *e; | |
525 | 3175 int sum = 0; |
3176 struct stat st; | |
3177 | |
3178 fstat (fildes, &st); | |
491 | 3179 p = buf; |
3180 while (nbytes > 0) | |
3181 { | |
525 | 3182 int len, retval; |
3183 | |
3184 /* Handle fixed-length files with carriage control. */ | |
3185 if (st.st_fab_rfm == FAB$C_FIX | |
3186 && ((st.st_fab_rat & (FAB$M_FTN | FAB$M_CR)) != 0)) | |
3187 { | |
3188 len = st.st_fab_mrs; | |
3189 retval = write (fildes, p, min (len, nbytes)); | |
3190 if (retval != len) | |
3191 return -1; | |
3192 retval++; /* This skips the implied carriage control */ | |
3193 } | |
3194 else | |
3195 { | |
3196 e = p + min (MAXIOSIZE, nbytes) - 1; | |
3197 while (*e != '\n' && e > p) e--; | |
3198 if (p == e) /* Ok.. so here we add a newline... sigh. */ | |
3199 e = p + min (MAXIOSIZE, nbytes) - 1; | |
3200 len = e + 1 - p; | |
3201 retval = write (fildes, p, len); | |
3202 if (retval != len) | |
3203 return -1; | |
3204 } | |
3205 p += retval; | |
3206 sum += retval; | |
491 | 3207 nbytes -= retval; |
3208 } | |
3209 return sum; | |
3210 } | |
3211 | |
3212 /* Create file NEW copying its attributes from file OLD. If | |
3213 OLD is 0 or does not exist, create based on the value of | |
3214 vms_stmlf_recfm. */ | |
3215 | |
3216 /* Protection value the file should ultimately have. | |
3217 Set by create_copy_attrs, and use by rename_sansversions. */ | |
3218 static unsigned short int fab_final_pro; | |
3219 | |
3220 int | |
3221 creat_copy_attrs (old, new) | |
3222 char *old, *new; | |
3223 { | |
3224 struct FAB fab = cc$rms_fab; | |
3225 struct XABPRO xabpro; | |
3226 char aclbuf[256]; /* Choice of size is arbitrary. See below. */ | |
3227 extern int vms_stmlf_recfm; | |
3228 | |
3229 if (old) | |
3230 { | |
3231 fab.fab$b_fac = FAB$M_GET; | |
3232 fab.fab$l_fna = old; | |
3233 fab.fab$b_fns = strlen (old); | |
3234 fab.fab$l_xab = (char *) &xabpro; | |
3235 xabpro = cc$rms_xabpro; | |
3236 xabpro.xab$l_aclbuf = aclbuf; | |
3237 xabpro.xab$w_aclsiz = sizeof aclbuf; | |
3238 /* Call $OPEN to fill in the fab & xabpro fields. */ | |
3239 if (sys$open (&fab, 0, 0) & 1) | |
3240 { | |
3241 sys$close (&fab, 0, 0); | |
3242 fab.fab$l_alq = 0; /* zero the allocation quantity */ | |
3243 if (xabpro.xab$w_acllen > 0) | |
3244 { | |
3245 if (xabpro.xab$w_acllen > sizeof aclbuf) | |
3246 /* If the acl buffer was too short, redo open with longer one. | |
3247 Wouldn't need to do this if there were some system imposed | |
3248 limit on the size of an ACL, but I can't find any such. */ | |
3249 { | |
3250 xabpro.xab$l_aclbuf = (char *) alloca (xabpro.xab$w_acllen); | |
3251 xabpro.xab$w_aclsiz = xabpro.xab$w_acllen; | |
3252 if (sys$open (&fab, 0, 0) & 1) | |
3253 sys$close (&fab, 0, 0); | |
3254 else | |
3255 old = 0; | |
3256 } | |
3257 } | |
3258 else | |
3259 xabpro.xab$l_aclbuf = 0; | |
3260 } | |
3261 else | |
3262 old = 0; | |
3263 } | |
3264 fab.fab$l_fna = new; | |
3265 fab.fab$b_fns = strlen (new); | |
3266 if (!old) | |
3267 { | |
3268 fab.fab$l_xab = 0; | |
3269 fab.fab$b_rfm = vms_stmlf_recfm ? FAB$C_STMLF : FAB$C_VAR; | |
3270 fab.fab$b_rat = FAB$M_CR; | |
3271 } | |
3272 | |
3273 /* Set the file protections such that we will be able to manipulate | |
3274 this file. Once we are done writing and renaming it, we will set | |
3275 the protections back. */ | |
3276 if (old) | |
3277 fab_final_pro = xabpro.xab$w_pro; | |
3278 else | |
3279 sys$setdfprot (0, &fab_final_pro); | |
3280 xabpro.xab$w_pro &= 0xff0f; /* set O:rewd for now. This is set back later. */ | |
3281 | |
3282 /* Create the new file with either default attrs or attrs copied | |
3283 from old file. */ | |
3284 if (!(SYS$CREATE (&fab, 0, 0) & 1)) | |
3285 return -1; | |
3286 sys$close (&fab, 0, 0); | |
3287 /* As this is a "replacement" for creat, return a file descriptor | |
3288 opened for writing. */ | |
3289 return open (new, O_WRONLY); | |
3290 } | |
3291 | |
3292 #ifdef creat | |
3293 #undef creat | |
3294 #include <varargs.h> | |
3295 #ifdef __GNUC__ | |
3296 #ifndef va_count | |
3297 #define va_count(X) ((X) = *(((int *) &(va_alist)) - 1)) | |
3298 #endif | |
3299 #endif | |
3300 | |
3301 sys_creat (va_alist) | |
3302 va_dcl | |
3303 { | |
3304 va_list list_incrementor; | |
3305 char *name; | |
3306 int mode; | |
3307 int rfd; /* related file descriptor */ | |
3308 int fd; /* Our new file descriptor */ | |
3309 int count; | |
3310 struct stat st_buf; | |
3311 char rfm[12]; | |
3312 char rat[15]; | |
3313 char mrs[13]; | |
3314 char fsz[13]; | |
3315 extern int vms_stmlf_recfm; | |
3316 | |
3317 va_count (count); | |
3318 va_start (list_incrementor); | |
3319 name = va_arg (list_incrementor, char *); | |
3320 mode = va_arg (list_incrementor, int); | |
3321 if (count > 2) | |
3322 rfd = va_arg (list_incrementor, int); | |
3323 va_end (list_incrementor); | |
3324 if (count > 2) | |
3325 { | |
3326 /* Use information from the related file descriptor to set record | |
3327 format of the newly created file. */ | |
3328 fstat (rfd, &st_buf); | |
3329 switch (st_buf.st_fab_rfm) | |
3330 { | |
3331 case FAB$C_FIX: | |
3332 strcpy (rfm, "rfm = fix"); | |
3333 sprintf (mrs, "mrs = %d", st_buf.st_fab_mrs); | |
3334 strcpy (rat, "rat = "); | |
3335 if (st_buf.st_fab_rat & FAB$M_CR) | |
3336 strcat (rat, "cr"); | |
3337 else if (st_buf.st_fab_rat & FAB$M_FTN) | |
3338 strcat (rat, "ftn"); | |
3339 else if (st_buf.st_fab_rat & FAB$M_PRN) | |
3340 strcat (rat, "prn"); | |
3341 if (st_buf.st_fab_rat & FAB$M_BLK) | |
3342 if (st_buf.st_fab_rat & (FAB$M_CR|FAB$M_FTN|FAB$M_PRN)) | |
3343 strcat (rat, ", blk"); | |
3344 else | |
3345 strcat (rat, "blk"); | |
3346 return creat (name, 0, rfm, rat, mrs); | |
3347 | |
3348 case FAB$C_VFC: | |
3349 strcpy (rfm, "rfm = vfc"); | |
3350 sprintf (fsz, "fsz = %d", st_buf.st_fab_fsz); | |
3351 strcpy (rat, "rat = "); | |
3352 if (st_buf.st_fab_rat & FAB$M_CR) | |
3353 strcat (rat, "cr"); | |
3354 else if (st_buf.st_fab_rat & FAB$M_FTN) | |
3355 strcat (rat, "ftn"); | |
3356 else if (st_buf.st_fab_rat & FAB$M_PRN) | |
3357 strcat (rat, "prn"); | |
3358 if (st_buf.st_fab_rat & FAB$M_BLK) | |
3359 if (st_buf.st_fab_rat & (FAB$M_CR|FAB$M_FTN|FAB$M_PRN)) | |
3360 strcat (rat, ", blk"); | |
3361 else | |
3362 strcat (rat, "blk"); | |
3363 return creat (name, 0, rfm, rat, fsz); | |
3364 | |
3365 case FAB$C_STM: | |
3366 strcpy (rfm, "rfm = stm"); | |
3367 break; | |
3368 | |
3369 case FAB$C_STMCR: | |
3370 strcpy (rfm, "rfm = stmcr"); | |
3371 break; | |
3372 | |
3373 case FAB$C_STMLF: | |
3374 strcpy (rfm, "rfm = stmlf"); | |
3375 break; | |
3376 | |
3377 case FAB$C_UDF: | |
3378 strcpy (rfm, "rfm = udf"); | |
3379 break; | |
3380 | |
3381 case FAB$C_VAR: | |
3382 strcpy (rfm, "rfm = var"); | |
3383 break; | |
3384 } | |
3385 strcpy (rat, "rat = "); | |
3386 if (st_buf.st_fab_rat & FAB$M_CR) | |
3387 strcat (rat, "cr"); | |
3388 else if (st_buf.st_fab_rat & FAB$M_FTN) | |
3389 strcat (rat, "ftn"); | |
3390 else if (st_buf.st_fab_rat & FAB$M_PRN) | |
3391 strcat (rat, "prn"); | |
3392 if (st_buf.st_fab_rat & FAB$M_BLK) | |
3393 if (st_buf.st_fab_rat & (FAB$M_CR|FAB$M_FTN|FAB$M_PRN)) | |
3394 strcat (rat, ", blk"); | |
3395 else | |
3396 strcat (rat, "blk"); | |
3397 } | |
3398 else | |
3399 { | |
3400 strcpy (rfm, vms_stmlf_recfm ? "rfm = stmlf" : "rfm=var"); | |
3401 strcpy (rat, "rat=cr"); | |
3402 } | |
3403 /* Until the VAX C RTL fixes the many bugs with modes, always use | |
3404 mode 0 to get the user's default protection. */ | |
3405 fd = creat (name, 0, rfm, rat); | |
3406 if (fd < 0 && errno == EEXIST) | |
3407 { | |
3408 if (unlink (name) < 0) | |
3409 report_file_error ("delete", build_string (name)); | |
3410 fd = creat (name, 0, rfm, rat); | |
3411 } | |
3412 return fd; | |
3413 } | |
3414 #endif /* creat */ | |
3415 | |
3416 /* fwrite to stdout is S L O W. Speed it up by using fputc...*/ | |
3417 sys_fwrite (ptr, size, num, fp) | |
3418 register char * ptr; | |
3419 FILE * fp; | |
3420 { | |
3421 register int tot = num * size; | |
3422 | |
3423 while (tot--) | |
3424 fputc (*ptr++, fp); | |
3425 } | |
3426 | |
3427 /* | |
3428 * The VMS C library routine creat actually creates a new version of an | |
3429 * existing file rather than truncating the old version. There are times | |
3430 * when this is not the desired behavior, for instance, when writing an | |
3431 * auto save file (you only want one version), or when you don't have | |
3432 * write permission in the directory containing the file (but the file | |
3433 * itself is writable). Hence this routine, which is equivalent to | |
3434 * "close (creat (fn, 0));" on Unix if fn already exists. | |
3435 */ | |
3436 int | |
3437 vms_truncate (fn) | |
3438 char *fn; | |
3439 { | |
3440 struct FAB xfab = cc$rms_fab; | |
3441 struct RAB xrab = cc$rms_rab; | |
3442 int status; | |
3443 | |
3444 xfab.fab$l_fop = FAB$M_TEF; /* free allocated but unused blocks on close */ | |
3445 xfab.fab$b_fac = FAB$M_TRN | FAB$M_GET; /* allow truncate and get access */ | |
3446 xfab.fab$b_shr = FAB$M_NIL; /* allow no sharing - file must be locked */ | |
3447 xfab.fab$l_fna = fn; | |
3448 xfab.fab$b_fns = strlen (fn); | |
3449 xfab.fab$l_dna = ";0"; /* default to latest version of the file */ | |
3450 xfab.fab$b_dns = 2; | |
3451 xrab.rab$l_fab = &xfab; | |
3452 | |
3453 /* This gibberish opens the file, positions to the first record, and | |
3454 deletes all records from there until the end of file. */ | |
3455 if ((sys$open (&xfab) & 01) == 01) | |
3456 { | |
3457 if ((sys$connect (&xrab) & 01) == 01 && | |
3458 (sys$find (&xrab) & 01) == 01 && | |
3459 (sys$truncate (&xrab) & 01) == 01) | |
3460 status = 0; | |
3461 else | |
3462 status = -1; | |
3463 } | |
3464 else | |
3465 status = -1; | |
3466 sys$close (&xfab); | |
3467 return status; | |
3468 } | |
3469 | |
3470 /* Define this symbol to actually read SYSUAF.DAT. This requires either | |
3471 SYSPRV or a readable SYSUAF.DAT. */ | |
3472 | |
3473 #ifdef READ_SYSUAF | |
3474 /* | |
3475 * getuaf.c | |
3476 * | |
3477 * Routine to read the VMS User Authorization File and return | |
3478 * a specific user's record. | |
3479 */ | |
3480 | |
3481 static struct UAF retuaf; | |
3482 | |
3483 struct UAF * | |
3484 get_uaf_name (uname) | |
3485 char * uname; | |
3486 { | |
3487 register status; | |
3488 struct FAB uaf_fab; | |
3489 struct RAB uaf_rab; | |
3490 | |
3491 uaf_fab = cc$rms_fab; | |
3492 uaf_rab = cc$rms_rab; | |
3493 /* initialize fab fields */ | |
3494 uaf_fab.fab$l_fna = "SYS$SYSTEM:SYSUAF.DAT"; | |
3495 uaf_fab.fab$b_fns = 21; | |
3496 uaf_fab.fab$b_fac = FAB$M_GET; | |
3497 uaf_fab.fab$b_org = FAB$C_IDX; | |
3498 uaf_fab.fab$b_shr = FAB$M_GET|FAB$M_PUT|FAB$M_UPD|FAB$M_DEL; | |
3499 /* initialize rab fields */ | |
3500 uaf_rab.rab$l_fab = &uaf_fab; | |
3501 /* open the User Authorization File */ | |
3502 status = sys$open (&uaf_fab); | |
3503 if (!(status&1)) | |
3504 { | |
3505 errno = EVMSERR; | |
3506 vaxc$errno = status; | |
3507 return 0; | |
3508 } | |
3509 status = sys$connect (&uaf_rab); | |
3510 if (!(status&1)) | |
3511 { | |
3512 errno = EVMSERR; | |
3513 vaxc$errno = status; | |
3514 return 0; | |
3515 } | |
3516 /* read the requested record - index is in uname */ | |
3517 uaf_rab.rab$l_kbf = uname; | |
3518 uaf_rab.rab$b_ksz = strlen (uname); | |
3519 uaf_rab.rab$b_rac = RAB$C_KEY; | |
3520 uaf_rab.rab$l_ubf = (char *)&retuaf; | |
3521 uaf_rab.rab$w_usz = sizeof retuaf; | |
3522 status = sys$get (&uaf_rab); | |
3523 if (!(status&1)) | |
3524 { | |
3525 errno = EVMSERR; | |
3526 vaxc$errno = status; | |
3527 return 0; | |
3528 } | |
3529 /* close the User Authorization File */ | |
3530 status = sys$disconnect (&uaf_rab); | |
3531 if (!(status&1)) | |
3532 { | |
3533 errno = EVMSERR; | |
3534 vaxc$errno = status; | |
3535 return 0; | |
3536 } | |
3537 status = sys$close (&uaf_fab); | |
3538 if (!(status&1)) | |
3539 { | |
3540 errno = EVMSERR; | |
3541 vaxc$errno = status; | |
3542 return 0; | |
3543 } | |
3544 return &retuaf; | |
3545 } | |
3546 | |
3547 struct UAF * | |
3548 get_uaf_uic (uic) | |
3549 unsigned long uic; | |
3550 { | |
3551 register status; | |
3552 struct FAB uaf_fab; | |
3553 struct RAB uaf_rab; | |
3554 | |
3555 uaf_fab = cc$rms_fab; | |
3556 uaf_rab = cc$rms_rab; | |
3557 /* initialize fab fields */ | |
3558 uaf_fab.fab$l_fna = "SYS$SYSTEM:SYSUAF.DAT"; | |
3559 uaf_fab.fab$b_fns = 21; | |
3560 uaf_fab.fab$b_fac = FAB$M_GET; | |
3561 uaf_fab.fab$b_org = FAB$C_IDX; | |
3562 uaf_fab.fab$b_shr = FAB$M_GET|FAB$M_PUT|FAB$M_UPD|FAB$M_DEL; | |
3563 /* initialize rab fields */ | |
3564 uaf_rab.rab$l_fab = &uaf_fab; | |
3565 /* open the User Authorization File */ | |
3566 status = sys$open (&uaf_fab); | |
3567 if (!(status&1)) | |
3568 { | |
3569 errno = EVMSERR; | |
3570 vaxc$errno = status; | |
3571 return 0; | |
3572 } | |
3573 status = sys$connect (&uaf_rab); | |
3574 if (!(status&1)) | |
3575 { | |
3576 errno = EVMSERR; | |
3577 vaxc$errno = status; | |
3578 return 0; | |
3579 } | |
3580 /* read the requested record - index is in uic */ | |
3581 uaf_rab.rab$b_krf = 1; /* 1st alternate key */ | |
3582 uaf_rab.rab$l_kbf = (char *) &uic; | |
3583 uaf_rab.rab$b_ksz = sizeof uic; | |
3584 uaf_rab.rab$b_rac = RAB$C_KEY; | |
3585 uaf_rab.rab$l_ubf = (char *)&retuaf; | |
3586 uaf_rab.rab$w_usz = sizeof retuaf; | |
3587 status = sys$get (&uaf_rab); | |
3588 if (!(status&1)) | |
3589 { | |
3590 errno = EVMSERR; | |
3591 vaxc$errno = status; | |
3592 return 0; | |
3593 } | |
3594 /* close the User Authorization File */ | |
3595 status = sys$disconnect (&uaf_rab); | |
3596 if (!(status&1)) | |
3597 { | |
3598 errno = EVMSERR; | |
3599 vaxc$errno = status; | |
3600 return 0; | |
3601 } | |
3602 status = sys$close (&uaf_fab); | |
3603 if (!(status&1)) | |
3604 { | |
3605 errno = EVMSERR; | |
3606 vaxc$errno = status; | |
3607 return 0; | |
3608 } | |
3609 return &retuaf; | |
3610 } | |
3611 | |
3612 static struct passwd retpw; | |
3613 | |
3614 struct passwd * | |
3615 cnv_uaf_pw (up) | |
3616 struct UAF * up; | |
3617 { | |
3618 char * ptr; | |
3619 | |
3620 /* copy these out first because if the username is 32 chars, the next | |
3621 section will overwrite the first byte of the UIC */ | |
3622 retpw.pw_uid = up->uaf$w_mem; | |
3623 retpw.pw_gid = up->uaf$w_grp; | |
3624 | |
3625 /* I suppose this is not the best sytle, to possibly overwrite one | |
3626 byte beyond the end of the field, but what the heck... */ | |
3627 ptr = &up->uaf$t_username[UAF$S_USERNAME]; | |
3628 while (ptr[-1] == ' ') | |
3629 ptr--; | |
3630 *ptr = '\0'; | |
3631 strcpy (retpw.pw_name, up->uaf$t_username); | |
3632 | |
3633 /* the rest of these are counted ascii strings */ | |
3634 strncpy (retpw.pw_gecos, &up->uaf$t_owner[1], up->uaf$t_owner[0]); | |
3635 retpw.pw_gecos[up->uaf$t_owner[0]] = '\0'; | |
3636 strncpy (retpw.pw_dir, &up->uaf$t_defdev[1], up->uaf$t_defdev[0]); | |
3637 retpw.pw_dir[up->uaf$t_defdev[0]] = '\0'; | |
3638 strncat (retpw.pw_dir, &up->uaf$t_defdir[1], up->uaf$t_defdir[0]); | |
3639 retpw.pw_dir[up->uaf$t_defdev[0] + up->uaf$t_defdir[0]] = '\0'; | |
3640 strncpy (retpw.pw_shell, &up->uaf$t_defcli[1], up->uaf$t_defcli[0]); | |
3641 retpw.pw_shell[up->uaf$t_defcli[0]] = '\0'; | |
3642 | |
3643 return &retpw; | |
3644 } | |
3645 #else /* not READ_SYSUAF */ | |
3646 static struct passwd retpw; | |
3647 #endif /* not READ_SYSUAF */ | |
3648 | |
3649 struct passwd * | |
3650 getpwnam (name) | |
3651 char * name; | |
3652 { | |
3653 #ifdef READ_SYSUAF | |
3654 struct UAF *up; | |
3655 #else | |
3656 char * user; | |
3657 char * dir; | |
3658 unsigned char * full; | |
3659 #endif /* READ_SYSUAF */ | |
3660 char *ptr = name; | |
3661 | |
3662 while (*ptr) | |
3663 { | |
3664 if ('a' <= *ptr && *ptr <= 'z') | |
3665 *ptr -= 040; | |
3666 ptr++; | |
3667 } | |
3668 #ifdef READ_SYSUAF | |
3669 if (!(up = get_uaf_name (name))) | |
3670 return 0; | |
3671 return cnv_uaf_pw (up); | |
3672 #else | |
3673 if (strcmp (name, getenv ("USER")) == 0) | |
3674 { | |
3675 retpw.pw_uid = getuid (); | |
3676 retpw.pw_gid = getgid (); | |
3677 strcpy (retpw.pw_name, name); | |
3678 if (full = egetenv ("FULLNAME")) | |
3679 strcpy (retpw.pw_gecos, full); | |
3680 else | |
3681 *retpw.pw_gecos = '\0'; | |
3682 strcpy (retpw.pw_dir, egetenv ("HOME")); | |
3683 *retpw.pw_shell = '\0'; | |
3684 return &retpw; | |
3685 } | |
3686 else | |
3687 return 0; | |
3688 #endif /* not READ_SYSUAF */ | |
3689 } | |
3690 | |
3691 struct passwd * | |
3692 getpwuid (uid) | |
3693 unsigned long uid; | |
3694 { | |
3695 #ifdef READ_SYSUAF | |
3696 struct UAF * up; | |
3697 | |
3698 if (!(up = get_uaf_uic (uid))) | |
3699 return 0; | |
3700 return cnv_uaf_pw (up); | |
3701 #else | |
3702 if (uid == sys_getuid ()) | |
3703 return getpwnam (egetenv ("USER")); | |
3704 else | |
3705 return 0; | |
3706 #endif /* not READ_SYSUAF */ | |
3707 } | |
3708 | |
3709 /* return total address space available to the current process. This is | |
3710 the sum of the current p0 size, p1 size and free page table entries | |
3711 available. */ | |
3712 vlimit () | |
3713 { | |
3714 int item_code; | |
3715 unsigned long free_pages; | |
3716 unsigned long frep0va; | |
3717 unsigned long frep1va; | |
3718 register status; | |
3719 | |
3720 item_code = JPI$_FREPTECNT; | |
3721 if (((status = LIB$GETJPI (&item_code, 0, 0, &free_pages)) & 1) == 0) | |
3722 { | |
3723 errno = EVMSERR; | |
3724 vaxc$errno = status; | |
3725 return -1; | |
3726 } | |
3727 free_pages *= 512; | |
3728 | |
3729 item_code = JPI$_FREP0VA; | |
3730 if (((status = LIB$GETJPI (&item_code, 0, 0, &frep0va)) & 1) == 0) | |
3731 { | |
3732 errno = EVMSERR; | |
3733 vaxc$errno = status; | |
3734 return -1; | |
3735 } | |
3736 item_code = JPI$_FREP1VA; | |
3737 if (((status = LIB$GETJPI (&item_code, 0, 0, &frep1va)) & 1) == 0) | |
3738 { | |
3739 errno = EVMSERR; | |
3740 vaxc$errno = status; | |
3741 return -1; | |
3742 } | |
3743 | |
3744 return free_pages + frep0va + (0x7fffffff - frep1va); | |
3745 } | |
3746 | |
3747 define_logical_name (varname, string) | |
3748 char *varname; | |
3749 char *string; | |
3750 { | |
3751 struct dsc$descriptor_s strdsc = | |
3752 {strlen (string), DSC$K_DTYPE_T, DSC$K_CLASS_S, string}; | |
3753 struct dsc$descriptor_s envdsc = | |
3754 {strlen (varname), DSC$K_DTYPE_T, DSC$K_CLASS_S, varname}; | |
3755 struct dsc$descriptor_s lnmdsc = | |
3756 {7, DSC$K_DTYPE_T, DSC$K_CLASS_S, "LNM$JOB"}; | |
3757 | |
3758 return LIB$SET_LOGICAL (&envdsc, &strdsc, &lnmdsc, 0, 0); | |
3759 } | |
3760 | |
3761 delete_logical_name (varname) | |
3762 char *varname; | |
3763 { | |
3764 struct dsc$descriptor_s envdsc = | |
3765 {strlen (varname), DSC$K_DTYPE_T, DSC$K_CLASS_S, varname}; | |
3766 struct dsc$descriptor_s lnmdsc = | |
3767 {7, DSC$K_DTYPE_T, DSC$K_CLASS_S, "LNM$JOB"}; | |
3768 | |
3769 return LIB$DELETE_LOGICAL (&envdsc, &lnmdsc); | |
3770 } | |
3771 | |
3772 ulimit () | |
3773 {} | |
3774 | |
3775 setpgrp () | |
3776 {} | |
3777 | |
3778 execvp () | |
3779 { | |
3780 error ("execvp system call not implemented"); | |
3781 } | |
3782 | |
3783 int | |
3784 rename (from, to) | |
3785 char *from, *to; | |
3786 { | |
3787 int status; | |
3788 struct FAB from_fab = cc$rms_fab, to_fab = cc$rms_fab; | |
3789 struct NAM from_nam = cc$rms_nam, to_nam = cc$rms_nam; | |
3790 char from_esn[NAM$C_MAXRSS]; | |
3791 char to_esn[NAM$C_MAXRSS]; | |
3792 | |
3793 from_fab.fab$l_fna = from; | |
3794 from_fab.fab$b_fns = strlen (from); | |
3795 from_fab.fab$l_nam = &from_nam; | |
3796 from_fab.fab$l_fop = FAB$M_NAM; | |
3797 | |
3798 from_nam.nam$l_esa = from_esn; | |
3799 from_nam.nam$b_ess = sizeof from_esn; | |
3800 | |
3801 to_fab.fab$l_fna = to; | |
3802 to_fab.fab$b_fns = strlen (to); | |
3803 to_fab.fab$l_nam = &to_nam; | |
3804 to_fab.fab$l_fop = FAB$M_NAM; | |
3805 | |
3806 to_nam.nam$l_esa = to_esn; | |
3807 to_nam.nam$b_ess = sizeof to_esn; | |
3808 | |
3809 status = SYS$RENAME (&from_fab, 0, 0, &to_fab); | |
3810 | |
3811 if (status & 1) | |
3812 return 0; | |
3813 else | |
3814 { | |
3815 if (status == RMS$_DEV) | |
3816 errno = EXDEV; | |
3817 else | |
3818 errno = EVMSERR; | |
3819 vaxc$errno = status; | |
3820 return -1; | |
3821 } | |
3822 } | |
3823 | |
3824 /* This function renames a file like `rename', but it strips | |
3825 the version number from the "to" filename, such that the "to" file is | |
3826 will always be a new version. It also sets the file protection once it is | |
3827 finished. The protection that we will use is stored in fab_final_pro, | |
3828 and was set when we did a creat_copy_attrs to create the file that we | |
3829 are renaming. | |
3830 | |
3831 We could use the chmod function, but Eunichs uses 3 bits per user category | |
3832 to describe the protection, and VMS uses 4 (write and delete are seperate | |
3833 bits). To maintain portability, the VMS implementation of `chmod' wires | |
3834 the W and D bits together. */ | |
3835 | |
3836 | |
3837 static struct fibdef fib; /* We need this initialized to zero */ | |
3838 char vms_file_written[NAM$C_MAXRSS]; | |
3839 | |
3840 int | |
3841 rename_sans_version (from,to) | |
3842 char *from, *to; | |
3843 { | |
3844 short int chan; | |
3845 int stat; | |
3846 short int iosb[4]; | |
3847 int status; | |
3848 struct FAB to_fab = cc$rms_fab; | |
3849 struct NAM to_nam = cc$rms_nam; | |
3850 struct dsc$descriptor fib_d ={sizeof (fib),0,0,(char*) &fib}; | |
3851 struct dsc$descriptor fib_attr[2] | |
3852 = {{sizeof (fab_final_pro),ATR$C_FPRO,0,(char*) &fab_final_pro},{0,0,0,0}}; | |
3853 char to_esn[NAM$C_MAXRSS]; | |
3854 | |
3855 $DESCRIPTOR (disk,to_esn); | |
3856 | |
3857 to_fab.fab$l_fna = to; | |
3858 to_fab.fab$b_fns = strlen (to); | |
3859 to_fab.fab$l_nam = &to_nam; | |
3860 to_fab.fab$l_fop = FAB$M_NAM; | |
3861 | |
3862 to_nam.nam$l_esa = to_esn; | |
3863 to_nam.nam$b_ess = sizeof to_esn; | |
3864 | |
3865 status = SYS$PARSE (&to_fab, 0, 0); /* figure out the full file name */ | |
3866 | |
3867 if (to_nam.nam$l_fnb && NAM$M_EXP_VER) | |
3868 *(to_nam.nam$l_ver) = '\0'; | |
3869 | |
3870 stat = rename (from, to_esn); | |
3871 if (stat < 0) | |
3872 return stat; | |
3873 | |
3874 strcpy (vms_file_written, to_esn); | |
3875 | |
3876 to_fab.fab$l_fna = vms_file_written; /* this points to the versionless name */ | |
3877 to_fab.fab$b_fns = strlen (vms_file_written); | |
3878 | |
3879 /* Now set the file protection to the correct value */ | |
3880 sys$open (&to_fab, 0, 0); /* This fills in the nam$w_fid fields */ | |
3881 | |
3882 /* Copy these fields into the fib */ | |
3883 fib.fib$r_fid_overlay.fib$w_fid[0] = to_nam.nam$w_fid[0]; | |
3884 fib.fib$r_fid_overlay.fib$w_fid[1] = to_nam.nam$w_fid[1]; | |
3885 fib.fib$r_fid_overlay.fib$w_fid[2] = to_nam.nam$w_fid[2]; | |
3886 | |
3887 sys$close (&to_fab, 0, 0); | |
3888 | |
3889 stat = sys$assign (&disk, &chan, 0, 0); /* open a channel to the disk */ | |
3890 if (!stat) | |
3891 lib$signal (stat); | |
3892 stat = sys$qiow (0, chan, IO$_MODIFY, iosb, 0, 0, &fib_d, | |
3893 0, 0, 0, &fib_attr, 0); | |
3894 if (!stat) | |
3895 lib$signal (stat); | |
3896 stat = sys$dassgn (chan); | |
3897 if (!stat) | |
3898 lib$signal (stat); | |
766 | 3899 strcpy (vms_file_written, to_esn); /* We will write this to the terminal*/ |
491 | 3900 return 0; |
3901 } | |
3902 | |
3903 link (file, new) | |
3904 char * file, * new; | |
3905 { | |
3906 register status; | |
3907 struct FAB fab; | |
3908 struct NAM nam; | |
3909 unsigned short fid[3]; | |
3910 char esa[NAM$C_MAXRSS]; | |
3911 | |
3912 fab = cc$rms_fab; | |
3913 fab.fab$l_fop = FAB$M_OFP; | |
3914 fab.fab$l_fna = file; | |
3915 fab.fab$b_fns = strlen (file); | |
3916 fab.fab$l_nam = &nam; | |
3917 | |
3918 nam = cc$rms_nam; | |
3919 nam.nam$l_esa = esa; | |
3920 nam.nam$b_ess = NAM$C_MAXRSS; | |
3921 | |
3922 status = SYS$PARSE (&fab); | |
3923 if ((status & 1) == 0) | |
3924 { | |
3925 errno = EVMSERR; | |
3926 vaxc$errno = status; | |
3927 return -1; | |
3928 } | |
3929 status = SYS$SEARCH (&fab); | |
3930 if ((status & 1) == 0) | |
3931 { | |
3932 errno = EVMSERR; | |
3933 vaxc$errno = status; | |
3934 return -1; | |
3935 } | |
3936 | |
3937 fid[0] = nam.nam$w_fid[0]; | |
3938 fid[1] = nam.nam$w_fid[1]; | |
3939 fid[2] = nam.nam$w_fid[2]; | |
3940 | |
3941 fab.fab$l_fna = new; | |
3942 fab.fab$b_fns = strlen (new); | |
3943 | |
3944 status = SYS$PARSE (&fab); | |
3945 if ((status & 1) == 0) | |
3946 { | |
3947 errno = EVMSERR; | |
3948 vaxc$errno = status; | |
3949 return -1; | |
3950 } | |
3951 | |
3952 nam.nam$w_fid[0] = fid[0]; | |
3953 nam.nam$w_fid[1] = fid[1]; | |
3954 nam.nam$w_fid[2] = fid[2]; | |
3955 | |
3956 nam.nam$l_esa = nam.nam$l_name; | |
3957 nam.nam$b_esl = nam.nam$b_name + nam.nam$b_type + nam.nam$b_ver; | |
3958 | |
3959 status = SYS$ENTER (&fab); | |
3960 if ((status & 1) == 0) | |
3961 { | |
3962 errno = EVMSERR; | |
3963 vaxc$errno = status; | |
3964 return -1; | |
3965 } | |
3966 | |
3967 return 0; | |
3968 } | |
3969 | |
3970 croak (badfunc) | |
3971 char *badfunc; | |
3972 { | |
3973 printf ("%s not yet implemented\r\n", badfunc); | |
3974 reset_sys_modes (); | |
3975 exit (1); | |
3976 } | |
3977 | |
3978 long | |
3979 random () | |
3980 { | |
3981 /* Arrange to return a range centered on zero. */ | |
3982 return rand () - (1 << 30); | |
3983 } | |
3984 | |
3985 srandom (seed) | |
3986 { | |
3987 srand (seed); | |
3988 } | |
3989 #endif /* VMS */ | |
3990 | |
3991 #ifdef AIX | |
3992 | |
3993 /* Called from init_sys_modes. */ | |
3994 hft_init () | |
3995 { | |
3996 int junk; | |
3997 | |
3998 /* If we're not on an HFT we shouldn't do any of this. We determine | |
3999 if we are on an HFT by trying to get an HFT error code. If this | |
4000 call fails, we're not on an HFT. */ | |
4001 #ifdef IBMR2AIX | |
4002 if (ioctl (0, HFQERROR, &junk) < 0) | |
4003 return; | |
4004 #else /* not IBMR2AIX */ | |
4005 if (ioctl (0, HFQEIO, 0) < 0) | |
4006 return; | |
4007 #endif /* not IBMR2AIX */ | |
4008 | |
4009 /* On AIX the default hft keyboard mapping uses backspace rather than delete | |
4010 as the rubout key's ASCII code. Here this is changed. The bug is that | |
4011 there's no way to determine the old mapping, so in reset_sys_modes | |
4012 we need to assume that the normal map had been present. Of course, this | |
4013 code also doesn't help if on a terminal emulator which doesn't understand | |
4014 HFT VTD's. */ | |
4015 { | |
4016 struct hfbuf buf; | |
4017 struct hfkeymap keymap; | |
4018 | |
4019 buf.hf_bufp = (char *)&keymap; | |
4020 buf.hf_buflen = sizeof (keymap); | |
4021 keymap.hf_nkeys = 2; | |
4022 keymap.hfkey[0].hf_kpos = 15; | |
4023 keymap.hfkey[0].hf_kstate = HFMAPCHAR | HFSHFNONE; | |
4024 #ifdef IBMR2AIX | |
4025 keymap.hfkey[0].hf_keyidh = '<'; | |
4026 #else /* not IBMR2AIX */ | |
4027 keymap.hfkey[0].hf_page = '<'; | |
4028 #endif /* not IBMR2AIX */ | |
4029 keymap.hfkey[0].hf_char = 127; | |
4030 keymap.hfkey[1].hf_kpos = 15; | |
4031 keymap.hfkey[1].hf_kstate = HFMAPCHAR | HFSHFSHFT; | |
4032 #ifdef IBMR2AIX | |
4033 keymap.hfkey[1].hf_keyidh = '<'; | |
4034 #else /* not IBMR2AIX */ | |
4035 keymap.hfkey[1].hf_page = '<'; | |
4036 #endif /* not IBMR2AIX */ | |
4037 keymap.hfkey[1].hf_char = 127; | |
4038 hftctl (0, HFSKBD, &buf); | |
4039 } | |
4040 /* The HFT system on AIX doesn't optimize for scrolling, so it's really ugly | |
4041 at times. */ | |
4042 line_ins_del_ok = char_ins_del_ok = 0; | |
4043 } | |
4044 | |
4045 /* Reset the rubout key to backspace. */ | |
4046 | |
4047 hft_reset () | |
4048 { | |
4049 struct hfbuf buf; | |
4050 struct hfkeymap keymap; | |
4051 int junk; | |
4052 | |
4053 #ifdef IBMR2AIX | |
4054 if (ioctl (0, HFQERROR, &junk) < 0) | |
4055 return; | |
4056 #else /* not IBMR2AIX */ | |
4057 if (ioctl (0, HFQEIO, 0) < 0) | |
4058 return; | |
4059 #endif /* not IBMR2AIX */ | |
4060 | |
4061 buf.hf_bufp = (char *)&keymap; | |
4062 buf.hf_buflen = sizeof (keymap); | |
4063 keymap.hf_nkeys = 2; | |
4064 keymap.hfkey[0].hf_kpos = 15; | |
4065 keymap.hfkey[0].hf_kstate = HFMAPCHAR | HFSHFNONE; | |
4066 #ifdef IBMR2AIX | |
4067 keymap.hfkey[0].hf_keyidh = '<'; | |
4068 #else /* not IBMR2AIX */ | |
4069 keymap.hfkey[0].hf_page = '<'; | |
4070 #endif /* not IBMR2AIX */ | |
4071 keymap.hfkey[0].hf_char = 8; | |
4072 keymap.hfkey[1].hf_kpos = 15; | |
4073 keymap.hfkey[1].hf_kstate = HFMAPCHAR | HFSHFSHFT; | |
4074 #ifdef IBMR2AIX | |
4075 keymap.hfkey[1].hf_keyidh = '<'; | |
4076 #else /* not IBMR2AIX */ | |
4077 keymap.hfkey[1].hf_page = '<'; | |
4078 #endif /* not IBMR2AIX */ | |
4079 keymap.hfkey[1].hf_char = 8; | |
4080 hftctl (0, HFSKBD, &buf); | |
4081 } | |
4082 | |
4083 #endif /* AIX */ |