annotate lisp/gud.el @ 6664:76774f82fb36

(version-control): Doc fix.

;;; gud.el --- Grand Unified Debugger mode for gdb, sdb, dbx, or xdb
;;;            under Emacs

;; Author: Eric S. Raymond <[e-mail]>
;; Maintainer: FSF
;; Version: 1.3
;; Keywords: unix, tools

;; Copyright (C) 1992, 1993 Free Software Foundation, Inc.

;; This file is part of GNU Emacs.

;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING.  If not, write to
;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.

;;; Commentary:

;; The ancestral gdb.el was by W. Schelter <[e-mail]>
;; It was later rewritten by rms.  Some ideas were due to Masanobu. 
;; Grand Unification (sdb/dbx support) by Eric S. Raymond <[e-mail]>
;; The overloading code was then rewritten by Barry Warsaw <[e-mail]>,
;; who also hacked the mode to use comint.el.  Shane Hartman <[e-mail]>
;; added support for xdb (HPUX debugger).  Rick Sladkey <[e-mail]>
;; wrote the GDB command completion code.

;;; Code:

(require 'comint)
(require 'etags)

;; ======================================================================
;; GUD commands must be visible in C buffers visited by GUD

(defvar gud-key-prefix "\C-x\C-a"
  "Prefix of all GUD commands valid in C buffers.")

(global-set-key (concat gud-key-prefix "\C-l") 'gud-refresh)
(global-set-key "\C-x " 'gud-break)	;; backward compatibility hack

;; ======================================================================
;; the overloading mechanism

(defun gud-overload-functions (gud-overload-alist)
  "Overload functions defined in GUD-OVERLOAD-ALIST.
This association list has elements of the form
     (ORIGINAL-FUNCTION-NAME  OVERLOAD-FUNCTION)"
  (mapcar
   (function (lambda (p) (fset (car p) (symbol-function (cdr p)))))
   gud-overload-alist))

(defun gud-massage-args (file args)
  (error "GUD not properly entered."))

(defun gud-marker-filter (str)
  (error "GUD not properly entered."))

(defun gud-find-file (f)
  (error "GUD not properly entered."))

;; ======================================================================
;; command definition

;; This macro is used below to define some basic debugger interface commands.
;; Of course you may use `gud-def' with any other debugger command, including
;; user defined ones.

;; A macro call like (gud-def FUNC NAME KEY DOC) expands to a form
;; which defines FUNC to send the command NAME to the debugger, gives
;; it the docstring DOC, and binds that function to KEY in the GUD
;; major mode.  The function is also bound in the global keymap with the
;; GUD prefix.

(defmacro gud-def (func cmd key &optional doc)
  "Define FUNC to be a command sending STR and bound to KEY, with
optional doc string DOC.  Certain %-escapes in the string arguments
are interpreted specially if present.  These are:

  %f	name (without directory) of current source file. 
  %d	directory of current source file. 
  %l	number of current source line
  %e	text of the C lvalue or function-call expression surrounding point.
  %a	text of the hexadecimal address surrounding point
  %p	prefix argument to the command (if any) as a number

  The `current' source file is the file of the current buffer (if
we're in a C file) or the source file current at the last break or
step (if we're in the GUD buffer).
  The `current' line is that of the current buffer (if we're in a
source file) or the source line number at the last break or step (if
we're in the GUD buffer)."
  (list 'progn
	(list 'defun func '(arg)
	      (or doc "")
	      '(interactive "p")
	      (list 'gud-call cmd 'arg))
	(if key
	    (list 'define-key
		  '(current-local-map)
		  (concat "\C-c" key)
		  (list 'quote func)))
	(if key
	    (list 'global-set-key
		  (list 'concat 'gud-key-prefix key)
		  (list 'quote func)))))

;; Where gud-display-frame should put the debugging arrow.  This is
;; set by the marker-filter, which scans the debugger's output for
;; indications of the current program counter.
(defvar gud-last-frame nil)

;; Used by gud-refresh, which should cause gud-display-frame to redisplay
;; the last frame, even if it's been called before and gud-last-frame has
;; been set to nil.
(defvar gud-last-last-frame nil)

;; All debugger-specific information is collected here.
;; Here's how it works, in case you ever need to add a debugger to the mode.
;;
;; Each entry must define the following at startup:
;;
;;<name>
;; comint-prompt-regexp
;; gud-<name>-massage-args
;; gud-<name>-marker-filter
;; gud-<name>-find-file
;;
;; The job of the massage-args method is to modify the given list of
;; debugger arguments before running the debugger.
;;
;; The job of the marker-filter method is to detect file/line markers in
;; strings and set the global gud-last-frame to indicate what display
;; action (if any) should be triggered by the marker.  Note that only
;; whatever the method *returns* is displayed in the buffer; thus, you
;; can filter the debugger's output, interpreting some and passing on
;; the rest.
;;
;; The job of the find-file method is to visit and return the buffer indicated
;; by the car of gud-tag-frame.  This may be a file name, a tag name, or
;; something else.

;; ======================================================================
;; gdb functions

;;; History of argument lists passed to gdb.
(defvar gud-gdb-history nil)

(defun gud-gdb-massage-args (file args)
  (cons "-fullname" (cons file args)))

;; There's no guarantee that Emacs will hand the filter the entire
;; marker at once; it could be broken up across several strings.  We
;; might even receive a big chunk with several markers in it.  If we
;; receive a chunk of text which looks like it might contain the
;; beginning of a marker, we save it here between calls to the
;; filter.
(defvar gud-gdb-marker-acc "")

(defun gud-gdb-marker-filter (string)
  (save-match-data
    (setq gud-gdb-marker-acc (concat gud-gdb-marker-acc string))
    (let ((output ""))

      ;; Process all the complete markers in this chunk.
      (while (string-match "^\032\032\\([^:\n]*\\):\\([0-9]*\\):.*\n"
			   gud-gdb-marker-acc)
	(setq

	 ;; Extract the frame position from the marker.
	 gud-last-frame
	 (cons (substring gud-gdb-marker-acc (match-beginning 1) (match-end 1))
	       (string-to-int (substring gud-gdb-marker-acc
					 (match-beginning 2)
					 (match-end 2))))

	 ;; Append any text before the marker to the output we're going
	 ;; to return - we don't include the marker in this text.
	 output (concat output
			(substring gud-gdb-marker-acc 0 (match-beginning 0)))

	 ;; Set the accumulator to the remaining text.
	 gud-gdb-marker-acc (substring gud-gdb-marker-acc (match-end 0))))

      ;; Does the remaining text look like it might end with the
      ;; beginning of another marker?  If it does, then keep it in
      ;; gud-gdb-marker-acc until we receive the rest of it.  Since we
      ;; know the full marker regexp above failed, it's pretty simple to
      ;; test for marker starts.
      (if (string-match "^\032.*\\'" gud-gdb-marker-acc)
	  (progn
	    ;; Everything before the potential marker start can be output.
	    (setq output (concat output (substring gud-gdb-marker-acc
						   0 (match-beginning 0))))

	    ;; Everything after, we save, to combine with later input.
	    (setq gud-gdb-marker-acc
		  (substring gud-gdb-marker-acc (match-beginning 0))))

	(setq output (concat output gud-gdb-marker-acc)
	      gud-gdb-marker-acc ""))

      output)))

(defun gud-gdb-find-file (f)
  (find-file-noselect f))

(defvar gdb-minibuffer-local-map nil
  "Keymap for minibuffer prompting of gdb startup command.")
(if gdb-minibuffer-local-map
    ()
  (setq gdb-minibuffer-local-map (copy-keymap minibuffer-local-map))
  (define-key
    gdb-minibuffer-local-map "\C-i" 'comint-dynamic-complete-filename))

;;;###autoload
(defun gdb (command-line)
  "Run gdb on program FILE in buffer *gud-FILE*.
The directory containing FILE becomes the initial working directory
and source-file directory for your debugger."
  (interactive
   (list (read-from-minibuffer "Run gdb (like this): "
			       (if (consp gud-gdb-history)
				   (car gud-gdb-history)
				 "gdb ")
			       gdb-minibuffer-local-map nil
			       '(gud-gdb-history . 1))))
  (gud-overload-functions '((gud-massage-args . gud-gdb-massage-args)
			    (gud-marker-filter . gud-gdb-marker-filter)
			    (gud-find-file . gud-gdb-find-file)
			    ))

  (gud-common-init command-line)

  (gud-def gud-break  "break %f:%l"  "\C-b" "Set breakpoint at current line.")
  (gud-def gud-tbreak "tbreak %f:%l" "\C-t" "Set breakpoint at current line.")
  (gud-def gud-remove "clear %l"     "\C-d" "Remove breakpoint at current line")
  (gud-def gud-step   "step %p"      "\C-s" "Step one source line with display.")
  (gud-def gud-stepi  "stepi %p"     "\C-i" "Step one instruction with display.")
  (gud-def gud-next   "next %p"      "\C-n" "Step one line (skip functions).")
  (gud-def gud-cont   "cont"         "\C-r" "Continue with display.")
  (gud-def gud-finish "finish"       "\C-f" "Finish executing current function.")
  (gud-def gud-up     "up %p"        "<" "Up N stack frames (numeric arg).")
  (gud-def gud-down   "down %p"      ">" "Down N stack frames (numeric arg).")
  (gud-def gud-print  "print %e"     "\C-p" "Evaluate C expression at point.")

  (local-set-key "\C-i" 'gud-gdb-complete-command)
  (setq comint-prompt-regexp "^(.*gdb[+]?) *")
  (run-hooks 'gdb-mode-hook)
  )

;; One of the nice features of GDB is its impressive support for
;; context-sensitive command completion.  We preserve that feature
;; in the GUD buffer by using a GDB command designed just for Emacs.

;; The completion process filter indicates when it is finished.
(defvar gud-gdb-complete-in-progress)

;; Since output may arrive in fragments we accumulate partials strings here.
(defvar gud-gdb-complete-string)

;; We need to know how much of the completion to chop off.
(defvar gud-gdb-complete-break)

;; The completion list is constructed by the process filter.
(defvar gud-gdb-complete-list)

(defvar gud-comint-buffer nil)

(defun gud-gdb-complete-command ()
  "Perform completion on the GDB command preceding point.
This is implemented using the GDB `complete' command which isn't
available with older versions of GDB."
  (interactive)
  (let* ((end (point))
	 (command (save-excursion
		    (beginning-of-line)
		    (and (looking-at comint-prompt-regexp)
			 (goto-char (match-end 0)))
		    (buffer-substring (point) end)))
	 command-word)
    ;; Find the word break.  This match will always succeed.
    (string-match "\\(\\`\\| \\)\\([^ ]*\\)\\'" command)
    (setq gud-gdb-complete-break (match-beginning 2)
	  command-word (substring command gud-gdb-complete-break))
    (unwind-protect
	(progn
	  ;; Temporarily install our filter function.
	  (gud-overload-functions
	   '((gud-marker-filter . gud-gdb-complete-filter)))
	  ;; Issue the command to GDB.
	  (gud-basic-call (concat "complete " command))
	  (setq gud-gdb-complete-in-progress t
		gud-gdb-complete-string nil
		gud-gdb-complete-list nil)
	  ;; Slurp the output.
	  (while gud-gdb-complete-in-progress
	    (accept-process-output (get-buffer-process gud-comint-buffer))))
      ;; Restore the old filter function.
      (gud-overload-functions '((gud-marker-filter . gud-gdb-marker-filter))))
    ;; Protect against old versions of GDB.
    (and gud-gdb-complete-list
	 (string-match "^Undefined command: \"complete\""
		       (car gud-gdb-complete-list))
	 (error "This version of GDB doesn't support the `complete' command."))
    ;; Sort the list like readline.
    (setq gud-gdb-complete-list
	  (sort gud-gdb-complete-list (function string-lessp)))
    ;; Remove duplicates.
    (let ((first gud-gdb-complete-list)
	  (second (cdr gud-gdb-complete-list)))
      (while second
	(if (string-equal (car first) (car second))
	    (setcdr first (setq second (cdr second)))
	  (setq first second
		second (cdr second)))))
    ;; Let comint handle the rest.
    (comint-dynamic-simple-complete command-word gud-gdb-complete-list)))
    
;; The completion process filter is installed temporarily to slurp the
;; output of GDB up to the next prompt and build the completion list.
(defun gud-gdb-complete-filter (string)
  (setq string (concat gud-gdb-complete-string string))
  (while (string-match "\n" string)
    (setq gud-gdb-complete-list
	  (cons (substring string gud-gdb-complete-break (match-beginning 0))
		gud-gdb-complete-list))
    (setq string (substring string (match-end 0))))
  (if (string-match comint-prompt-regexp string)
      (progn
	(setq gud-gdb-complete-in-progress nil)
	string)
    (progn
      (setq gud-gdb-complete-string string)
      "")))


;; ======================================================================
;; sdb functions

;;; History of argument lists passed to sdb.
(defvar gud-sdb-history nil)

(defvar gud-sdb-needs-tags (not (file-exists-p "/var"))
  "If nil, we're on a System V Release 4 and don't need the tags hack.")

(defvar gud-sdb-lastfile nil)

(defun gud-sdb-massage-args (file args)
  (cons file args))

(defun gud-sdb-marker-filter (string)
  (cond 
   ;; System V Release 3.2 uses this format
   ((string-match "\\(^0x\\w* in \\|^\\|\n\\)\\([^:\n]*\\):\\([0-9]*\\):.*\n"
		    string)
    (setq gud-last-frame
	  (cons
	   (substring string (match-beginning 2) (match-end 2))
	   (string-to-int 
	    (substring string (match-beginning 3) (match-end 3))))))
   ;; System V Release 4.0 
   ((string-match "^\\(BREAKPOINT\\|STEPPED\\) process [0-9]+ function [^ ]+ in \\(.+\\)\n"
		       string)
    (setq gud-sdb-lastfile
	  (substring string (match-beginning 2) (match-end 2))))
   ((and gud-sdb-lastfile (string-match "^\\([0-9]+\\):" string))
	 (setq gud-last-frame
	       (cons
		gud-sdb-lastfile
		(string-to-int 
		 (substring string (match-beginning 1) (match-end 1))))))
   (t 
    (setq gud-sdb-lastfile nil)))
  string)

(defun gud-sdb-find-file (f)
  (if gud-sdb-needs-tags
      (find-tag-noselect f)
    (find-file-noselect f)))

;;;###autoload
(defun sdb (command-line)
  "Run sdb on program FILE in buffer *gud-FILE*.
The directory containing FILE becomes the initial working directory
and source-file directory for your debugger."
  (interactive
   (list (read-from-minibuffer "Run sdb (like this): "
			       (if (consp gud-sdb-history)
				   (car gud-sdb-history)
				 "sdb ")
			       nil nil
			       '(gud-sdb-history . 1))))
  (if (and gud-sdb-needs-tags
	   (not (and (boundp 'tags-file-name) (file-exists-p tags-file-name))))
      (error "The sdb support requires a valid tags table to work."))
  (gud-overload-functions '((gud-massage-args . gud-sdb-massage-args)
			    (gud-marker-filter . gud-sdb-marker-filter)
			    (gud-find-file . gud-sdb-find-file)
			    ))

  (gud-common-init command-line)

  (gud-def gud-break  "%l b" "\C-b"   "Set breakpoint at current line.")
  (gud-def gud-tbreak "%l c" "\C-t"   "Set temporary breakpoint at current line.")
  (gud-def gud-remove "%l d" "\C-d"   "Remove breakpoint at current line")
  (gud-def gud-step   "s %p" "\C-s"   "Step one source line with display.")
  (gud-def gud-stepi  "i %p" "\C-i"   "Step one instruction with display.")
  (gud-def gud-next   "S %p" "\C-n"   "Step one line (skip functions).")
  (gud-def gud-cont   "c"    "\C-r"   "Continue with display.")
  (gud-def gud-print  "%e/"  "\C-p"   "Evaluate C expression at point.")

  (setq comint-prompt-regexp  "\\(^\\|\n\\)\\*")
  (run-hooks 'sdb-mode-hook)
  )

;; ======================================================================
;; dbx functions

;;; History of argument lists passed to dbx.
(defvar gud-dbx-history nil)

(defun gud-dbx-massage-args (file args)
  (cons file args))

(defun gud-dbx-marker-filter (string)
  (if (or (string-match
         "stopped in .* at line \\([0-9]*\\) in file \"\\([^\"]*\\)\""
         string)
        (string-match
         "signal .* in .* at line \\([0-9]*\\) in file \"\\([^\"]*\\)\""
         string))
      (setq gud-last-frame
	    (cons
	     (substring string (match-beginning 2) (match-end 2))
	     (string-to-int 
	      (substring string (match-beginning 1) (match-end 1))))))
  string)

;; Functions for dbx on Mips/Ultrix.
;; This is very similar to the code for gdb. The trick is to start dbx
;; with the (undocumented) option `-emacs'.

;; Are we running on a Mips system under Ultrix?
(defvar gud-dbx-mips-p (file-exists-p "/usr/include/mips"))

(defun gud-mipsdbx-massage-args (file args)
  (cons "-emacs" (cons file args)))

;; There's no guarantee that Emacs will hand the filter the entire
;; marker at once; it could be broken up across several strings.  We
;; might even receive a big chunk with several markers in it.  If we
;; receive a chunk of text which looks like it might contain the
;; beginning of a marker, we save it here between calls to the
;; filter.
(defvar gud-mipsdbx-marker-acc "")

(defun gud-mipsdbx-marker-filter (string)
  (save-match-data
    (setq gud-mipsdbx-marker-acc (concat gud-mipsdbx-marker-acc string))
    (let ((output ""))

      ;; Process all the complete markers in this chunk.
      (while (string-match
	      "^[] [0-9]*\032\032\\([^:\n]*\\):\\([0-9]*\\):.*\n"
	      gud-mipsdbx-marker-acc)
	(setq

	 ;; Extract the frame position from the marker.
	 gud-last-frame (cons
			 (substring gud-mipsdbx-marker-acc
				    (match-beginning 1) (match-end 1))
			 (string-to-int
			  (substring gud-mipsdbx-marker-acc
				     (match-beginning 2) (match-end 2))))

	 ;; Append any text before the marker to the output we're going
	 ;; to return - we don't include the marker in this text.
	 output (concat output (substring gud-mipsdbx-marker-acc
					  0 (match-beginning 0)))

	 ;; Set the accumulator to the remaining text.
	 gud-mipsdbx-marker-acc (substring gud-mipsdbx-marker-acc
					   (match-end 0))))

      ;; Does the remaining text look like it might end with the
      ;; beginning of another marker?  If it does, then keep it in
      ;; gud-mipsdbx-marker-acc until we receive the rest of it.
      ;; Since we know the full marker regexp above failed, it's pretty
      ;; simple to test for marker starts.
      (if (string-match "^[] [0-9]*\032.*\\'" gud-mipsdbx-marker-acc)
	  (setq
	   ;; Everything before the potential marker start can be output.
	   output (concat output (substring gud-mipsdbx-marker-acc
					    0 (match-beginning 0)))
	   ;; Everything after, we save, to combine with later input.
	   gud-mipsdbx-marker-acc (substring gud-mipsdbx-marker-acc
					     (match-beginning 0)))
	(setq output (concat output gud-mipsdbx-marker-acc)
	      gud-mipsdbx-marker-acc ""))

      output)))

(defun gud-dbx-find-file (f)
  (find-file-noselect f))

;;;###autoload
(defun dbx (command-line)
  "Run dbx on program FILE in buffer *gud-FILE*.
The directory containing FILE becomes the initial working directory
and source-file directory for your debugger."
  (interactive
   (list (read-from-minibuffer "Run dbx (like this): "
			       (if (consp gud-dbx-history)
				   (car gud-dbx-history)
				 "dbx ")
			       nil nil
			       '(gud-dbx-history . 1))))

  (gud-overload-functions
   (cond
    (gud-dbx-mips-p
     '((gud-massage-args . gud-mipsdbx-massage-args)
       (gud-marker-filter . gud-mipsdbx-marker-filter)
       (gud-find-file . gud-dbx-find-file)))
    (t
     '((gud-massage-args . gud-dbx-massage-args)
       (gud-marker-filter . gud-dbx-marker-filter)
       (gud-find-file . gud-dbx-find-file)))))

  (gud-common-init command-line)

  (cond
   (gud-dbx-mips-p
    (gud-def gud-break "stop at \"%f\":%l"
				  "\C-b" "Set breakpoint at current line.")
    (gud-def gud-finish "return"  "\C-f" "Finish executing current function."))
   (t
    (gud-def gud-break "file \"%d%f\"\nstop at %l"
				  "\C-b" "Set breakpoint at current line.")))

  (gud-def gud-remove "clear %l"  "\C-d" "Remove breakpoint at current line")
  (gud-def gud-step   "step %p"	  "\C-s" "Step one line with display.")
  (gud-def gud-stepi  "stepi %p"  "\C-i" "Step one instruction with display.")
  (gud-def gud-next   "next %p"	  "\C-n" "Step one line (skip functions).")
  (gud-def gud-cont   "cont"	  "\C-r" "Continue with display.")
  (gud-def gud-up     "up %p"	  "<" "Up (numeric arg) stack frames.")
  (gud-def gud-down   "down %p"	  ">" "Down (numeric arg) stack frames.")
  (gud-def gud-print  "print %e"  "\C-p" "Evaluate C expression at point.")

  (setq comint-prompt-regexp  "^[^)\n]*dbx) *")
  (run-hooks 'dbx-mode-hook)
  )

;; ======================================================================
;; xdb (HP PARISC debugger) functions

;;; History of argument lists passed to xdb.
(defvar gud-xdb-history nil)

(defvar gud-xdb-directories nil
  "*A list of directories that xdb should search for source code.
If nil, only source files in the program directory
will be known to xdb.

The file names should be absolute, or relative to the directory
containing the executable being debugged.")

(defun gud-xdb-massage-args (file args)
  (nconc (let ((directories gud-xdb-directories)
	       (result nil))
	   (while directories
	     (setq result (cons (car directories) (cons "-d" result)))
	     (setq directories (cdr directories)))
	   (nreverse (cons file result)))
	 args))

(defun gud-xdb-file-name (f)
  "Transform a relative pathname to a full pathname in xdb mode"
  (let ((result nil))
    (if (file-exists-p f)
        (setq result (expand-file-name f))
      (let ((directories gud-xdb-directories))
        (while directories
          (let ((path (concat (car directories) "/" f)))
            (if (file-exists-p path)
                (setq result (expand-file-name path)
                      directories nil)))
          (setq directories (cdr directories)))))
    result))

;; xdb does not print the lines all at once, so we have to accumulate them
(defvar gud-xdb-accumulation "")

(defun gud-xdb-marker-filter (string)
  (let (result)
    (if (or (string-match comint-prompt-regexp string)
            (string-match ".*\012" string))
        (setq result (concat gud-xdb-accumulation string)
              gud-xdb-accumulation "")
      (setq gud-xdb-accumulation (concat gud-xdb-accumulation string)))
    (if result
        (if (or (string-match "\\([^\n \t:]+\\): [^:]+: \\([0-9]+\\):" result)
                (string-match "[^: \t]+:[ \t]+\\([^:]+\\): [^:]+: \\([0-9]+\\):"
                              result))
            (let ((line (string-to-int 
                         (substring result (match-beginning 2) (match-end 2))))
                  (file (gud-xdb-file-name
                         (substring result (match-beginning 1) (match-end 1)))))
              (if file
                  (setq gud-last-frame (cons file line))))))
    (or result "")))    
               
(defun gud-xdb-find-file (f)
  (let ((realf (gud-xdb-file-name f)))
    (if realf (find-file-noselect realf))))

;;;###autoload
(defun xdb (command-line)
  "Run xdb on program FILE in buffer *gud-FILE*.
The directory containing FILE becomes the initial working directory
and source-file directory for your debugger.

You can set the variable 'gud-xdb-directories' to a list of program source
directories if your program contains sources from more than one directory."
  (interactive
   (list (read-from-minibuffer "Run xdb (like this): "
			       (if (consp gud-xdb-history)
				   (car gud-xdb-history)
				 "xdb ")
			       nil nil
			       '(gud-xdb-history . 1))))
  (gud-overload-functions '((gud-massage-args . gud-xdb-massage-args)
			    (gud-marker-filter . gud-xdb-marker-filter)
			    (gud-find-file . gud-xdb-find-file)))

  (gud-common-init command-line)

  (gud-def gud-break  "b %f:%l"    "\C-b" "Set breakpoint at current line.")
  (gud-def gud-tbreak "b %f:%l\\t" "\C-t"
           "Set temporary breakpoint at current line.")
  (gud-def gud-remove "db"         "\C-d" "Remove breakpoint at current line")
  (gud-def gud-step   "s %p"	   "\C-s" "Step one line with display.")
  (gud-def gud-next   "S %p"	   "\C-n" "Step one line (skip functions).")
  (gud-def gud-cont   "c"	   "\C-r" "Continue with display.")
  (gud-def gud-up     "up %p"	   "<"    "Up (numeric arg) stack frames.")
  (gud-def gud-down   "down %p"	   ">"    "Down (numeric arg) stack frames.")
  (gud-def gud-finish "bu\\t"      "\C-f" "Finish executing current function.")
  (gud-def gud-print  "p %e"       "\C-p" "Evaluate C expression at point.")

  (setq comint-prompt-regexp  "^>")
  (make-local-variable 'gud-xdb-accumulation)
  (setq gud-xdb-accumulation "")
  (run-hooks 'xdb-mode-hook))

;; ======================================================================
;; perldb functions

;;; History of argument lists passed to perldb.
(defvar gud-perldb-history nil)

(defun gud-perldb-massage-args (file args)
  (cons "-d" (cons file (cons "-emacs" args))))

;; There's no guarantee that Emacs will hand the filter the entire
;; marker at once; it could be broken up across several strings.  We
;; might even receive a big chunk with several markers in it.  If we
;; receive a chunk of text which looks like it might contain the
;; beginning of a marker, we save it here between calls to the
;; filter.
(defvar gud-perldb-marker-acc "")

(defun gud-perldb-marker-filter (string)
  (save-match-data
    (setq gud-perldb-marker-acc (concat gud-perldb-marker-acc string))
    (let ((output ""))

      ;; Process all the complete markers in this chunk.
      (while (string-match "^\032\032\\([^:\n]*\\):\\([0-9]*\\):.*\n"
			   gud-perldb-marker-acc)
	(setq

	 ;; Extract the frame position from the marker.
	 gud-last-frame
	 (cons (substring gud-perldb-marker-acc (match-beginning 1) (match-end 1))
	       (string-to-int (substring gud-perldb-marker-acc
					 (match-beginning 2)
					 (match-end 2))))

	 ;; Append any text before the marker to the output we're going
	 ;; to return - we don't include the marker in this text.
	 output (concat output
			(substring gud-perldb-marker-acc 0 (match-beginning 0)))

	 ;; Set the accumulator to the remaining text.
	 gud-perldb-marker-acc (substring gud-perldb-marker-acc (match-end 0))))

      ;; Does the remaining text look like it might end with the
      ;; beginning of another marker?  If it does, then keep it in
      ;; gud-perldb-marker-acc until we receive the rest of it.  Since we
      ;; know the full marker regexp above failed, it's pretty simple to
      ;; test for marker starts.
      (if (string-match "^\032.*\\'" gud-perldb-marker-acc)
	  (progn
	    ;; Everything before the potential marker start can be output.
	    (setq output (concat output (substring gud-perldb-marker-acc
						   0 (match-beginning 0))))

	    ;; Everything after, we save, to combine with later input.
	    (setq gud-perldb-marker-acc
		  (substring gud-perldb-marker-acc (match-beginning 0))))

	(setq output (concat output gud-perldb-marker-acc)
	      gud-perldb-marker-acc ""))

      output)))

(defun gud-perldb-find-file (f)
  (find-file-noselect f))

;;;###autoload
(defun perldb (command-line)
  "Run perldb on program FILE in buffer *gud-FILE*.
The directory containing FILE becomes the initial working directory
and source-file directory for your debugger."
  (interactive
   (list (read-from-minibuffer "Run perldb (like this): "
			       (if (consp gud-perldb-history)
				   (car gud-perldb-history)
				 "perl ")
			       nil nil
			       '(gud-perldb-history . 1))))
  (gud-overload-functions '((gud-massage-args . gud-perldb-massage-args)
			    (gud-marker-filter . gud-perldb-marker-filter)
			    (gud-find-file . gud-perldb-find-file)
			    ))

  (gud-common-init command-line)

  (gud-def gud-break  "b %l"         "\C-b" "Set breakpoint at current line.")
  (gud-def gud-remove "d %l"         "\C-d" "Remove breakpoint at current line")
  (gud-def gud-step   "s"            "\C-s" "Step one source line with display.")
  (gud-def gud-next   "n"            "\C-n" "Step one line (skip functions).")
  (gud-def gud-cont   "c"            "\C-r" "Continue with display.")
;  (gud-def gud-finish "finish"       "\C-f" "Finish executing current function.")
;  (gud-def gud-up     "up %p"        "<" "Up N stack frames (numeric arg).")
;  (gud-def gud-down   "down %p"      ">" "Down N stack frames (numeric arg).")
  (gud-def gud-print  "%e"           "\C-p" "Evaluate perl expression at point.")

  (setq comint-prompt-regexp "^  DB<[0-9]+> ")
  (run-hooks 'perldb-mode-hook)
  )

;;
;; End of debugger-specific information
;;


;;; When we send a command to the debugger via gud-call, it's annoying
;;; to see the command and the new prompt inserted into the debugger's
;;; buffer; we have other ways of knowing the command has completed.
;;;
;;; If the buffer looks like this:
;;; --------------------
;;; (gdb) set args foo bar
;;; (gdb) -!-
;;; --------------------
;;; (the -!- marks the location of point), and we type `C-x SPC' in a
;;; source file to set a breakpoint, we want the buffer to end up like
;;; this:
;;; --------------------
;;; (gdb) set args foo bar
;;; Breakpoint 1 at 0x92: file make-docfile.c, line 49.
;;; (gdb) -!-
;;; --------------------
;;; Essentially, the old prompt is deleted, and the command's output
;;; and the new prompt take its place.
;;;
;;; Not echoing the command is easy enough; you send it directly using
;;; process-send-string, and it never enters the buffer.  However,
;;; getting rid of the old prompt is trickier; you don't want to do it
;;; when you send the command, since that will result in an annoying
;;; flicker as the prompt is deleted, redisplay occurs while Emacs
;;; waits for a response from the debugger, and the new prompt is
;;; inserted.  Instead, we'll wait until we actually get some output
;;; from the subprocess before we delete the prompt.  If the command
;;; produced no output other than a new prompt, that prompt will most
;;; likely be in the first chunk of output received, so we will delete
;;; the prompt and then replace it with an identical one.  If the
;;; command produces output, the prompt is moving anyway, so the
;;; flicker won't be annoying.
;;;
;;; So - when we want to delete the prompt upon receipt of the next
;;; chunk of debugger output, we position gud-delete-prompt-marker at
;;; the start of the prompt; the process filter will notice this, and
;;; delete all text between it and the process output marker.  If
;;; gud-delete-prompt-marker points nowhere, we leave the current
;;; prompt alone.
(defvar gud-delete-prompt-marker nil)


(defun gud-mode ()
  "Major mode for interacting with an inferior debugger process.

   You start it up with one of the commands M-x gdb, M-x sdb, M-x dbx,
or M-x xdb.  Each entry point finishes by executing a hook; `gdb-mode-hook',
`sdb-mode-hook', `dbx-mode-hook' or `xdb-mode-hook' respectively.

After startup, the following commands are available in both the GUD
interaction buffer and any source buffer GUD visits due to a breakpoint stop
or step operation:

\\[gud-break] sets a breakpoint at the current file and line.  In the
GUD buffer, the current file and line are those of the last breakpoint or
step.  In a source buffer, they are the buffer's file and current line.

\\[gud-remove] removes breakpoints on the current file and line.

\\[gud-refresh] displays in the source window the last line referred to
in the gud buffer.

\\[gud-step], \\[gud-next], and \\[gud-stepi] do a step-one-line,
step-one-line (not entering function calls), and step-one-instruction
and then update the source window with the current file and position.
\\[gud-cont] continues execution.

\\[gud-print] tries to find the largest C lvalue or function-call expression
around point, and sends it to the debugger for value display.

The above commands are common to all supported debuggers except xdb which
does not support stepping instructions.

Under gdb, sdb and xdb, \\[gud-tbreak] behaves exactly like \\[gud-break],
except that the breakpoint is temporary; that is, it is removed when
execution stops on it.

Under gdb, dbx, and xdb, \\[gud-up] pops up through an enclosing stack
frame.  \\[gud-down] drops back down through one.

If you are using gdb or xdb, \\[gud-finish] runs execution to the return from
the current function and stops.

All the keystrokes above are accessible in the GUD buffer
with the prefix C-c, and in all buffers through the prefix C-x C-a.

All pre-defined functions for which the concept make sense repeat
themselves the appropriate number of times if you give a prefix
argument.

You may use the `gud-def' macro in the initialization hook to define other
commands.

Other commands for interacting with the debugger process are inherited from
comint mode, which see."
  (interactive)
  (comint-mode)
  (setq major-mode 'gud-mode)
  (setq mode-name "Debugger")
  (setq mode-line-process '(": %s"))
  (use-local-map (copy-keymap comint-mode-map))
  (define-key (current-local-map) "\C-c\C-l" 'gud-refresh)
  (make-local-variable 'gud-last-frame)
  (setq gud-last-frame nil)
  (make-local-variable 'comint-prompt-regexp)
  (make-local-variable 'gud-delete-prompt-marker)
  (setq gud-delete-prompt-marker (make-marker))
  (run-hooks 'gud-mode-hook)
)

;; Chop STRING into words separated by SPC or TAB and return a list of them.
(defun gud-chop-words (string)
  (let ((i 0) (beg 0)
	(len (length string))
	(words nil))
    (while (< i len)
      (if (memq (aref string i) '(?\t ? ))
	  (progn
	    (setq words (cons (substring string beg i) words)
		  beg (1+ i))
	    (while (and (< beg len) (memq (aref string beg) '(?\t ? )))
	      (setq beg (1+ beg)))
	    (setq i (1+ beg)))
	(setq i (1+ i))))
    (if (< beg len)
	(setq words (cons (substring string beg) words)))
    (nreverse words)))

;; Perform initializations common to all debuggers.
(defun gud-common-init (command-line)
  (let* ((words (gud-chop-words command-line))
	 (program (car words))
	 (file-word (let ((w (cdr words)))
		      (while (and w (= ?- (aref (car w) 0)))
			(setq w (cdr w)))
		      (car w)))
	 (args (delq file-word (cdr words)))
	 (file (and file-word
		    (expand-file-name (substitute-in-file-name file-word))))
	 (filepart (and file-word (file-name-nondirectory file))))
      (switch-to-buffer (concat "*gud-" filepart "*"))
      (and file-word (setq default-directory (file-name-directory file)))
      (or (bolp) (newline))
      (insert "Current directory is " default-directory "\n")
      (apply 'make-comint (concat "gud-" filepart) program nil
	     (if file-word (gud-massage-args file args))))
  (gud-mode)
  (set-process-filter (get-buffer-process (current-buffer)) 'gud-filter)
  (set-process-sentinel (get-buffer-process (current-buffer)) 'gud-sentinel)
  (gud-set-buffer)
  )

(defun gud-set-buffer ()
  (cond ((eq major-mode 'gud-mode)
	(setq gud-comint-buffer (current-buffer)))))

;; These functions are responsible for inserting output from your debugger
;; into the buffer.  The hard work is done by the method that is
;; the value of gud-marker-filter.

;; Rather than duplicating all the work of comint-output-filter, perhaps
;; gud-filter should be implemented by adding appropriate hooks to
;; comint-output-filter.  Would somebody like to volunteer to do that?
(defun gud-filter (proc string)
  ;; Here's where the actual buffer insertion is done
  (let ((inhibit-quit t))
    (save-excursion
      (set-buffer (process-buffer proc))
      (let (moving output-after-point)
	(save-excursion
	  (goto-char (process-mark proc))
	  ;; If we have been so requested, delete the debugger prompt.
	  (if (marker-buffer gud-delete-prompt-marker)
	      (progn
		(delete-region (point) gud-delete-prompt-marker)
		(set-marker gud-delete-prompt-marker nil)))
	  (setq string (gud-marker-filter string))
	  (insert-before-markers string)
	  (and comint-last-input-end
	       (marker-buffer comint-last-input-end)
	       (= (point) comint-last-input-end)
	       (set-marker comint-last-input-end
			   (- comint-last-input-end (length string))))
	  (setq moving (= (point) (process-mark proc)))
	  (setq output-after-point (< (point) (process-mark proc)))
	  ;; Check for a filename-and-line number.
	  ;; Don't display the specified file
	  ;; unless (1) point is at or after the position where output appears
	  ;; and (2) this buffer is on the screen.
	  (if (and gud-last-frame
		   (not output-after-point)
		   (get-buffer-window (current-buffer)))
	      (gud-display-frame)))
	(if moving (goto-char (process-mark proc)))))))

(defun gud-sentinel (proc msg)
  (cond ((null (buffer-name (process-buffer proc)))
	 ;; buffer killed
	 ;; Stop displaying an arrow in a source file.
	 (setq overlay-arrow-position nil)
	 (set-process-buffer proc nil))
	((memq (process-status proc) '(signal exit))
	 ;; Stop displaying an arrow in a source file.
	 (setq overlay-arrow-position nil)
	 ;; Fix the mode line.
	 (setq mode-line-process
	       (concat ": "
		       (symbol-name (process-status proc))))
	 (let* ((obuf (current-buffer)))
	   ;; save-excursion isn't the right thing if
	   ;;  process-buffer is current-buffer
	   (unwind-protect
	       (progn
		 ;; Write something in *compilation* and hack its mode line,
		 (set-buffer (process-buffer proc))
		 ;; Force mode line redisplay soon
		 (set-buffer-modified-p (buffer-modified-p))
		 (if (eobp)
		     (insert ?\n mode-name " " msg)
		   (save-excursion
		     (goto-char (point-max))
		     (insert ?\n mode-name " " msg)))
		 ;; If buffer and mode line will show that the process
		 ;; is dead, we can delete it now.  Otherwise it
		 ;; will stay around until M-x list-processes.
		 (delete-process proc))
	     ;; Restore old buffer, but don't restore old point
	     ;; if obuf is the gud buffer.
	     (set-buffer obuf))))))

(defun gud-display-frame ()
  "Find and obey the last filename-and-line marker from the debugger.
Obeying it means displaying in another window the specified file and line."
  (interactive)
  (if gud-last-frame
   (progn
     (gud-set-buffer)
     (gud-display-line (car gud-last-frame) (cdr gud-last-frame))
     (setq gud-last-last-frame gud-last-frame
	   gud-last-frame nil))))

;; Make sure the file named TRUE-FILE is in a buffer that appears on the screen
;; and that its line LINE is visible.
;; Put the overlay-arrow on the line LINE in that buffer.
;; Most of the trickiness in here comes from wanting to preserve the current
;; region-restriction if that's possible.  We use an explicit display-buffer
;; to get around the fact that this is called inside a save-excursion.

(defun gud-display-line (true-file line)
  (let* ((buffer (gud-find-file true-file))
	 (window (display-buffer buffer))
	 (pos))
;;;    (if (equal buffer (current-buffer))
;;;	nil
;;;      (setq buffer-read-only nil))
    (save-excursion
;;;      (setq buffer-read-only t)
      (set-buffer buffer)
      (save-restriction
	(widen)
	(goto-line line)
	(setq pos (point))
	(setq overlay-arrow-string "=>")
	(or overlay-arrow-position
	    (setq overlay-arrow-position (make-marker)))
	(set-marker overlay-arrow-position (point) (current-buffer)))
      (cond ((or (< pos (point-min)) (> pos (point-max)))
	     (widen)
	     (goto-char pos))))
    (set-window-point window overlay-arrow-position)))

;;; The gud-call function must do the right thing whether its invoking
;;; keystroke is from the GUD buffer itself (via major-mode binding)
;;; or a C buffer.  In the former case, we want to supply data from
;;; gud-last-frame.  Here's how we do it:

(defun gud-format-command (str arg)
  (let ((insource (not (eq (current-buffer) gud-comint-buffer)))
	(frame (or gud-last-frame gud-last-last-frame))
	result)
    (while (and str (string-match "\\([^%]*\\)%\\([adeflp]\\)" str))
      (let ((key (string-to-char (substring str (match-beginning 2))))
	    subst)
	(cond
	 ((eq key ?f)
	  (setq subst (file-name-nondirectory (if insource
						  (buffer-file-name)
						(car frame)))))
	 ((eq key ?d)
	  (setq subst (file-name-directory (if insource
					       (buffer-file-name)
					     (car frame)))))
	 ((eq key ?l)
	  (setq subst (if insource
			  (save-excursion
			    (beginning-of-line)
			    (save-restriction (widen) 
					      (1+ (count-lines 1 (point)))))
			(cdr frame))))
	 ((eq key ?e)
	  (setq subst (find-c-expr)))
	 ((eq key ?a)
	  (setq subst (gud-read-address)))
	 ((eq key ?p)
	  (setq subst (if arg (int-to-string arg) ""))))
	(setq result (concat result
			     (substring str (match-beginning 1) (match-end 1))
			     subst)))
      (setq str (substring str (match-end 2))))
    ;; There might be text left in STR when the loop ends.
    (concat result str)))

(defun gud-read-address ()
  "Return a string containing the core-address found in the buffer at point."
  (save-excursion
    (let ((pt (point)) found begin)
      (setq found (if (search-backward "0x" (- pt 7) t) (point)))
      (cond
       (found (forward-char 2)
	      (buffer-substring found
				(progn (re-search-forward "[^0-9a-f]")
				       (forward-char -1)
				       (point))))
       (t (setq begin (progn (re-search-backward "[^0-9]") 
			     (forward-char 1)
			     (point)))
	  (forward-char 1)
	  (re-search-forward "[^0-9]")
	  (forward-char -1)
	  (buffer-substring begin (point)))))))

(defun gud-call (fmt &optional arg)
  (let ((msg (gud-format-command fmt arg)))
    (message "Command: %s" msg)
    (sit-for 0)
    (gud-basic-call msg)))

(defun gud-basic-call (command)
  "Invoke the debugger COMMAND displaying source in other window."
  (interactive)
  (gud-set-buffer)
  (let ((command (concat command "\n"))
	(proc (get-buffer-process gud-comint-buffer)))

    ;; Arrange for the current prompt to get deleted.
    (save-excursion
      (set-buffer gud-comint-buffer)
      (goto-char (process-mark proc))
      (beginning-of-line)
      (if (looking-at comint-prompt-regexp)
	  (set-marker gud-delete-prompt-marker (point))))
    (process-send-string proc command)))

(defun gud-refresh (&optional arg)
  "Fix up a possibly garbled display, and redraw the arrow."
  (interactive "P")
  (recenter arg)
  (or gud-last-frame (setq gud-last-frame gud-last-last-frame))
  (gud-display-frame))

;;; Code for parsing expressions out of C code.  The single entry point is
;;; find-c-expr, which tries to return an lvalue expression from around point.
;;;
;;; The rest of this file is a hacked version of gdbsrc.el by
;;; Debby Ayers <[e-mail]>,
;;; Rich Schaefer <[e-mail]> Schlumberger, Austin, Tx.

(defun find-c-expr ()
  "Returns the C expr that surrounds point."
  (interactive)
  (save-excursion
    (let ((p) (expr) (test-expr))
      (setq p (point))
      (setq expr (expr-cur))
      (setq test-expr (expr-prev))
      (while (expr-compound test-expr expr)
	(setq expr (cons (car test-expr) (cdr expr)))
	(goto-char (car expr))
	(setq test-expr (expr-prev)))
      (goto-char p)
      (setq test-expr (expr-next))
      (while (expr-compound expr test-expr)
	(setq expr (cons (car expr) (cdr test-expr)))
	(setq test-expr (expr-next))
	)
      (buffer-substring (car expr) (cdr expr)))))

(defun expr-cur ()
  "Returns the expr that point is in; point is set to beginning of expr.
The expr is represented as a cons cell, where the car specifies the point in
the current buffer that marks the beginning of the expr and the cdr specifies 
the character after the end of the expr."
  (let ((p (point)) (begin) (end))
    (expr-backward-sexp)
    (setq begin (point))
    (expr-forward-sexp)
    (setq end (point))
    (if (>= p end) 
	(progn
	 (setq begin p)
	 (goto-char p)
	 (expr-forward-sexp)
	 (setq end (point))
	 )
      )
    (goto-char begin)
    (cons begin end)))

(defun expr-backward-sexp ()
  "Version of `backward-sexp' that catches errors."
  (condition-case nil
      (backward-sexp)
    (error t)))

(defun expr-forward-sexp ()
  "Version of `forward-sexp' that catches errors."
  (condition-case nil
     (forward-sexp)
    (error t)))

(defun expr-prev ()
  "Returns the previous expr, point is set to beginning of that expr.
The expr is represented as a cons cell, where the car specifies the point in
the current buffer that marks the beginning of the expr and the cdr specifies 
the character after the end of the expr"
  (let ((begin) (end))
    (expr-backward-sexp)
    (setq begin (point))
    (expr-forward-sexp)
    (setq end (point))
    (goto-char begin)
    (cons begin end)))

(defun expr-next ()
  "Returns the following expr, point is set to beginning of that expr.
The expr is represented as a cons cell, where the car specifies the point in
the current buffer that marks the beginning of the expr and the cdr specifies 
the character after the end of the expr."
  (let ((begin) (end))
    (expr-forward-sexp)
    (expr-forward-sexp)
    (setq end (point))
    (expr-backward-sexp)
    (setq begin (point))
    (cons begin end)))

(defun expr-compound-sep (span-start span-end)
  "Returns '.' for '->' & '.', returns ' ' for white space,
returns '?' for other punctuation."
  (let ((result ? )
	(syntax))
    (while (< span-start span-end)
      (setq syntax (char-syntax (char-after span-start)))
      (cond
       ((= syntax ? ) t)
       ((= syntax ?.) (setq syntax (char-after span-start))
	(cond 
	 ((= syntax ?.) (setq result ?.))
	 ((and (= syntax ?-) (= (char-after (+ span-start 1)) ?>))
	  (setq result ?.)
	  (setq span-start (+ span-start 1)))
	 (t (setq span-start span-end)
	    (setq result ??)))))
      (setq span-start (+ span-start 1)))
    result))

(defun expr-compound (first second)
  "Non-nil if concatenating FIRST and SECOND makes a single C token.
The two exprs are represented as a cons cells, where the car 
specifies the point in the current buffer that marks the beginning of the 
expr and the cdr specifies the character after the end of the expr.
Link exprs of the form:
      Expr -> Expr
      Expr . Expr
      Expr (Expr)
      Expr [Expr]
      (Expr) Expr
      [Expr] Expr"
  (let ((span-start (cdr first))
	(span-end (car second))
	(syntax))
    (setq syntax (expr-compound-sep span-start span-end))
    (cond
     ((= (car first) (car second)) nil)
     ((= (cdr first) (cdr second)) nil)
     ((= syntax ?.) t)
     ((= syntax ? )
	 (setq span-start (char-after (- span-start 1)))
	 (setq span-end (char-after span-end))
	 (cond
	  ((= span-start ?) ) t )
	  ((= span-start ?] ) t )
          ((= span-end ?( ) t )
	  ((= span-end ?[ ) t )
	  (t nil))
	 )
     (t nil))))

(provide 'gud)

;;; gud.el ends here