annotate src/dbusbind.c @ 110484:7ca55779eeef

Fix some more uses of int instead of EMACS_INT. editfns.c (Fsubst_char_in_region, Ftranslate_region_internal) (check_translation): Use EMACS_INT for buffer positions and length. undo.c (record_marker_adjustment, record_delete) (record_change, record_point, record_insert) (record_property_change, Fprimitive_undo): Use EMACS_INT for buffer positions. lisp.h (record_marker_adjustment, record_delete) (record_change, record_point, record_insert) (record_property_change, Fprimitive_undo): Adjust prototypes.

/* Elisp bindings for D-Bus.
   Copyright (C) 2007, 2008, 2009, 2010 Free Software Foundation, Inc.

This file is part of GNU Emacs.

GNU Emacs is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.  */

#include <config.h>

#ifdef HAVE_DBUS
#include <stdlib.h>
#include <stdio.h>
#include <dbus/dbus.h>
#include <setjmp.h>
#include "lisp.h"
#include "frame.h"
#include "termhooks.h"
#include "keyboard.h"


/* Subroutines.  */
Lisp_Object Qdbus_init_bus;
Lisp_Object Qdbus_close_bus;
Lisp_Object Qdbus_get_unique_name;
Lisp_Object Qdbus_call_method;
Lisp_Object Qdbus_call_method_asynchronously;
Lisp_Object Qdbus_method_return_internal;
Lisp_Object Qdbus_method_error_internal;
Lisp_Object Qdbus_send_signal;
Lisp_Object Qdbus_register_signal;
Lisp_Object Qdbus_register_method;

/* D-Bus error symbol.  */
Lisp_Object Qdbus_error;

/* Lisp symbols of the system and session buses.  */
Lisp_Object QCdbus_system_bus, QCdbus_session_bus;

/* Lisp symbol for method call timeout.  */
Lisp_Object QCdbus_timeout;

/* Lisp symbols of D-Bus types.  */
Lisp_Object QCdbus_type_byte, QCdbus_type_boolean;
Lisp_Object QCdbus_type_int16, QCdbus_type_uint16;
Lisp_Object QCdbus_type_int32, QCdbus_type_uint32;
Lisp_Object QCdbus_type_int64, QCdbus_type_uint64;
Lisp_Object QCdbus_type_double, QCdbus_type_string;
Lisp_Object QCdbus_type_object_path, QCdbus_type_signature;
Lisp_Object QCdbus_type_array, QCdbus_type_variant;
Lisp_Object QCdbus_type_struct, QCdbus_type_dict_entry;

/* Registered buses.  */
Lisp_Object Vdbus_registered_buses;

/* Hash table which keeps function definitions.  */
Lisp_Object Vdbus_registered_objects_table;

/* Whether to debug D-Bus.  */
Lisp_Object Vdbus_debug;

/* Whether we are reading a D-Bus event.  */
int xd_in_read_queued_messages = 0;


/* We use "xd_" and "XD_" as prefix for all internal symbols, because
   we don't want to poison other namespaces with "dbus_".  */

/* Raise a signal.  If we are reading events, we cannot signal; we
   throw to xd_read_queued_messages then.  */
#define XD_SIGNAL1(arg)							\
  do {									\
    if (xd_in_read_queued_messages)					\
      Fthrow (Qdbus_error, Qnil);					\
    else								\
      xsignal1 (Qdbus_error, arg);					\
  } while (0)

#define XD_SIGNAL2(arg1, arg2)						\
  do {									\
    if (xd_in_read_queued_messages)					\
      Fthrow (Qdbus_error, Qnil);					\
    else								\
      xsignal2 (Qdbus_error, arg1, arg2);				\
  } while (0)

#define XD_SIGNAL3(arg1, arg2, arg3)					\
  do {									\
    if (xd_in_read_queued_messages)					\
      Fthrow (Qdbus_error, Qnil);					\
    else								\
      xsignal3 (Qdbus_error, arg1, arg2, arg3);				\
  } while (0)

/* Raise a Lisp error from a D-Bus ERROR.  */
#define XD_ERROR(error)							\
  do {									\
    char s[1024];							\
    strncpy (s, error.message, 1023);					\
    dbus_error_free (&error);						\
    /* Remove the trailing newline.  */					\
    if (strchr (s, '\n') != NULL)					\
      s[strlen (s) - 1] = '\0';						\
    XD_SIGNAL1 (build_string (s));					\
  } while (0)

/* Macros for debugging.  In order to enable them, build with
   "MYCPPFLAGS='-DDBUS_DEBUG -Wall' make".  */
#ifdef DBUS_DEBUG
#define XD_DEBUG_MESSAGE(...)		\
  do {					\
    char s[1024];			\
    snprintf (s, 1023, __VA_ARGS__);	\
    printf ("%s: %s\n", __func__, s);	\
    message ("%s: %s", __func__, s);	\
  } while (0)
#define XD_DEBUG_VALID_LISP_OBJECT_P(object)				\
  do {									\
    if (!valid_lisp_object_p (object))					\
      {									\
	XD_DEBUG_MESSAGE ("%d Assertion failure", __LINE__);		\
	XD_SIGNAL1 (build_string ("Assertion failure"));		\
      }									\
  } while (0)

#else /* !DBUS_DEBUG */
#define XD_DEBUG_MESSAGE(...)						\
  do {									\
    if (!NILP (Vdbus_debug))						\
      {									\
	char s[1024];							\
	snprintf (s, 1023, __VA_ARGS__);				\
	message ("%s: %s", __func__, s);				\
      }									\
  } while (0)
#define XD_DEBUG_VALID_LISP_OBJECT_P(object)
#endif

/* Check whether TYPE is a basic DBusType.  */
#define XD_BASIC_DBUS_TYPE(type)					\
  ((type ==  DBUS_TYPE_BYTE)						\
   || (type ==  DBUS_TYPE_BOOLEAN)					\
   || (type ==  DBUS_TYPE_INT16)					\
   || (type ==  DBUS_TYPE_UINT16)					\
   || (type ==  DBUS_TYPE_INT32)					\
   || (type ==  DBUS_TYPE_UINT32)					\
   || (type ==  DBUS_TYPE_INT64)					\
   || (type ==  DBUS_TYPE_UINT64)					\
   || (type ==  DBUS_TYPE_DOUBLE)					\
   || (type ==  DBUS_TYPE_STRING)					\
   || (type ==  DBUS_TYPE_OBJECT_PATH)					\
   || (type ==  DBUS_TYPE_SIGNATURE))

/* This was a macro.  On Solaris 2.11 it was said to compile for
   hours, when optimzation is enabled.  So we have transferred it into
   a function.  */
/* Determine the DBusType of a given Lisp symbol.  OBJECT must be one
   of the predefined D-Bus type symbols.  */
static int
xd_symbol_to_dbus_type (Lisp_Object object)
{
  return
    ((EQ (object, QCdbus_type_byte)) ? DBUS_TYPE_BYTE
     : (EQ (object, QCdbus_type_boolean)) ? DBUS_TYPE_BOOLEAN
     : (EQ (object, QCdbus_type_int16)) ? DBUS_TYPE_INT16
     : (EQ (object, QCdbus_type_uint16)) ? DBUS_TYPE_UINT16
     : (EQ (object, QCdbus_type_int32)) ? DBUS_TYPE_INT32
     : (EQ (object, QCdbus_type_uint32)) ? DBUS_TYPE_UINT32
     : (EQ (object, QCdbus_type_int64)) ? DBUS_TYPE_INT64
     : (EQ (object, QCdbus_type_uint64)) ? DBUS_TYPE_UINT64
     : (EQ (object, QCdbus_type_double)) ? DBUS_TYPE_DOUBLE
     : (EQ (object, QCdbus_type_string)) ? DBUS_TYPE_STRING
     : (EQ (object, QCdbus_type_object_path)) ? DBUS_TYPE_OBJECT_PATH
     : (EQ (object, QCdbus_type_signature)) ? DBUS_TYPE_SIGNATURE
     : (EQ (object, QCdbus_type_array)) ? DBUS_TYPE_ARRAY
     : (EQ (object, QCdbus_type_variant)) ? DBUS_TYPE_VARIANT
     : (EQ (object, QCdbus_type_struct)) ? DBUS_TYPE_STRUCT
     : (EQ (object, QCdbus_type_dict_entry)) ? DBUS_TYPE_DICT_ENTRY
     : DBUS_TYPE_INVALID);
}

/* Check whether a Lisp symbol is a predefined D-Bus type symbol.  */
#define XD_DBUS_TYPE_P(object)						\
  (SYMBOLP (object) && ((xd_symbol_to_dbus_type (object) != DBUS_TYPE_INVALID)))

/* Determine the DBusType of a given Lisp OBJECT.  It is used to
   convert Lisp objects, being arguments of `dbus-call-method' or
   `dbus-send-signal', into corresponding C values appended as
   arguments to a D-Bus message.  */
#define XD_OBJECT_TO_DBUS_TYPE(object)					\
  ((EQ (object, Qt) || EQ (object, Qnil)) ? DBUS_TYPE_BOOLEAN		\
   : (NATNUMP (object)) ? DBUS_TYPE_UINT32				\
   : (INTEGERP (object)) ? DBUS_TYPE_INT32				\
   : (FLOATP (object)) ? DBUS_TYPE_DOUBLE				\
   : (STRINGP (object)) ? DBUS_TYPE_STRING				\
   : (XD_DBUS_TYPE_P (object)) ? xd_symbol_to_dbus_type (object)	\
   : (CONSP (object))							\
   ? ((XD_DBUS_TYPE_P (CAR_SAFE (object)))				\
      ? ((XD_BASIC_DBUS_TYPE (xd_symbol_to_dbus_type (CAR_SAFE (object)))) \
	 ? DBUS_TYPE_ARRAY						\
	 : xd_symbol_to_dbus_type (CAR_SAFE (object)))			\
      : DBUS_TYPE_ARRAY)						\
   : DBUS_TYPE_INVALID)

/* Return a list pointer which does not have a Lisp symbol as car.  */
#define XD_NEXT_VALUE(object)						\
  ((XD_DBUS_TYPE_P (CAR_SAFE (object))) ? CDR_SAFE (object) : object)

/* Compute SIGNATURE of OBJECT.  It must have a form that it can be
   used in dbus_message_iter_open_container.  DTYPE is the DBusType
   the object is related to.  It is passed as argument, because it
   cannot be detected in basic type objects, when they are preceded by
   a type symbol.  PARENT_TYPE is the DBusType of a container this
   signature is embedded, or DBUS_TYPE_INVALID.  It is needed for the
   check that DBUS_TYPE_DICT_ENTRY occurs only as array element.  */
static void
xd_signature (char *signature, unsigned int dtype, unsigned int parent_type, Lisp_Object object)
{
  unsigned int subtype;
  Lisp_Object elt;
  char x[DBUS_MAXIMUM_SIGNATURE_LENGTH];

  elt = object;

  switch (dtype)
    {
    case DBUS_TYPE_BYTE:
    case DBUS_TYPE_UINT16:
    case DBUS_TYPE_UINT32:
    case DBUS_TYPE_UINT64:
      CHECK_NATNUM (object);
      sprintf (signature, "%c", dtype);
      break;

    case DBUS_TYPE_BOOLEAN:
      if (!EQ (object, Qt) && !EQ (object, Qnil))
	wrong_type_argument (intern ("booleanp"), object);
      sprintf (signature, "%c", dtype);
      break;

    case DBUS_TYPE_INT16:
    case DBUS_TYPE_INT32:
    case DBUS_TYPE_INT64:
      CHECK_NUMBER (object);
      sprintf (signature, "%c", dtype);
      break;

    case DBUS_TYPE_DOUBLE:
      CHECK_FLOAT (object);
      sprintf (signature, "%c", dtype);
      break;

    case DBUS_TYPE_STRING:
    case DBUS_TYPE_OBJECT_PATH:
    case DBUS_TYPE_SIGNATURE:
      CHECK_STRING (object);
      sprintf (signature, "%c", dtype);
      break;

    case DBUS_TYPE_ARRAY:
      /* Check that all list elements have the same D-Bus type.  For
	 complex element types, we just check the container type, not
	 the whole element's signature.  */
      CHECK_CONS (object);

      /* Type symbol is optional.  */
      if (EQ (QCdbus_type_array, CAR_SAFE (elt)))
	elt = XD_NEXT_VALUE (elt);

      /* If the array is empty, DBUS_TYPE_STRING is the default
	 element type.  */
      if (NILP (elt))
	{
	  subtype = DBUS_TYPE_STRING;
	  strcpy (x, DBUS_TYPE_STRING_AS_STRING);
	}
      else
	{
	  subtype = XD_OBJECT_TO_DBUS_TYPE (CAR_SAFE (elt));
	  xd_signature (x, subtype, dtype, CAR_SAFE (XD_NEXT_VALUE (elt)));
	}

      /* If the element type is DBUS_TYPE_SIGNATURE, and this is the
	 only element, the value of this element is used as he array's
	 element signature.  */
      if ((subtype == DBUS_TYPE_SIGNATURE)
	  && STRINGP (CAR_SAFE (XD_NEXT_VALUE (elt)))
	  && NILP (CDR_SAFE (XD_NEXT_VALUE (elt))))
	strcpy (x, SDATA (CAR_SAFE (XD_NEXT_VALUE (elt))));

      while (!NILP (elt))
	{
	  if (subtype != XD_OBJECT_TO_DBUS_TYPE (CAR_SAFE (elt)))
	    wrong_type_argument (intern ("D-Bus"), CAR_SAFE (elt));
	  elt = CDR_SAFE (XD_NEXT_VALUE (elt));
	}

      sprintf (signature, "%c%s", dtype, x);
      break;

    case DBUS_TYPE_VARIANT:
      /* Check that there is exactly one list element.  */
      CHECK_CONS (object);

      elt = XD_NEXT_VALUE (elt);
      subtype = XD_OBJECT_TO_DBUS_TYPE (CAR_SAFE (elt));
      xd_signature (x, subtype, dtype, CAR_SAFE (XD_NEXT_VALUE (elt)));

      if (!NILP (CDR_SAFE (XD_NEXT_VALUE (elt))))
	wrong_type_argument (intern ("D-Bus"),
			     CAR_SAFE (CDR_SAFE (XD_NEXT_VALUE (elt))));

      sprintf (signature, "%c", dtype);
      break;

    case DBUS_TYPE_STRUCT:
      /* A struct list might contain any number of elements with
	 different types.  No further check needed.  */
      CHECK_CONS (object);

      elt = XD_NEXT_VALUE (elt);

      /* Compose the signature from the elements.  It is enclosed by
	 parentheses.  */
      sprintf (signature, "%c", DBUS_STRUCT_BEGIN_CHAR );
      while (!NILP (elt))
	{
	  subtype = XD_OBJECT_TO_DBUS_TYPE (CAR_SAFE (elt));
	  xd_signature (x, subtype, dtype, CAR_SAFE (XD_NEXT_VALUE (elt)));
	  strcat (signature, x);
	  elt = CDR_SAFE (XD_NEXT_VALUE (elt));
	}
      strcat (signature, DBUS_STRUCT_END_CHAR_AS_STRING);
      break;

    case DBUS_TYPE_DICT_ENTRY:
      /* Check that there are exactly two list elements, and the first
	 one is of basic type.  The dictionary entry itself must be an
	 element of an array.  */
      CHECK_CONS (object);

      /* Check the parent object type.  */
      if (parent_type != DBUS_TYPE_ARRAY)
	wrong_type_argument (intern ("D-Bus"), object);

      /* Compose the signature from the elements.  It is enclosed by
	 curly braces.  */
      sprintf (signature, "%c", DBUS_DICT_ENTRY_BEGIN_CHAR);

      /* First element.  */
      elt = XD_NEXT_VALUE (elt);
      subtype = XD_OBJECT_TO_DBUS_TYPE (CAR_SAFE (elt));
      xd_signature (x, subtype, dtype, CAR_SAFE (XD_NEXT_VALUE (elt)));
      strcat (signature, x);

      if (!XD_BASIC_DBUS_TYPE (subtype))
	wrong_type_argument (intern ("D-Bus"), CAR_SAFE (XD_NEXT_VALUE (elt)));

      /* Second element.  */
      elt = CDR_SAFE (XD_NEXT_VALUE (elt));
      subtype = XD_OBJECT_TO_DBUS_TYPE (CAR_SAFE (elt));
      xd_signature (x, subtype, dtype, CAR_SAFE (XD_NEXT_VALUE (elt)));
      strcat (signature, x);

      if (!NILP (CDR_SAFE (XD_NEXT_VALUE (elt))))
	wrong_type_argument (intern ("D-Bus"),
			     CAR_SAFE (CDR_SAFE (XD_NEXT_VALUE (elt))));

      /* Closing signature.  */
      strcat (signature, DBUS_DICT_ENTRY_END_CHAR_AS_STRING);
      break;

    default:
      wrong_type_argument (intern ("D-Bus"), object);
    }

  XD_DEBUG_MESSAGE ("%s", signature);
}

/* Append C value, extracted from Lisp OBJECT, to iteration ITER.
   DTYPE must be a valid DBusType.  It is used to convert Lisp
   objects, being arguments of `dbus-call-method' or
   `dbus-send-signal', into corresponding C values appended as
   arguments to a D-Bus message.  */
static void
xd_append_arg (unsigned int dtype, Lisp_Object object, DBusMessageIter *iter)
{
  char signature[DBUS_MAXIMUM_SIGNATURE_LENGTH];
  DBusMessageIter subiter;

  if (XD_BASIC_DBUS_TYPE (dtype))
    switch (dtype)
      {
      case DBUS_TYPE_BYTE:
	CHECK_NUMBER (object);
	{
	  unsigned char val = XUINT (object) & 0xFF;
	  XD_DEBUG_MESSAGE ("%c %d", dtype, val);
	  if (!dbus_message_iter_append_basic (iter, dtype, &val))
	    XD_SIGNAL2 (build_string ("Unable to append argument"), object);
	  return;
	}

      case DBUS_TYPE_BOOLEAN:
	{
	  dbus_bool_t val = (NILP (object)) ? FALSE : TRUE;
	  XD_DEBUG_MESSAGE ("%c %s", dtype, (val == FALSE) ? "false" : "true");
	  if (!dbus_message_iter_append_basic (iter, dtype, &val))
	    XD_SIGNAL2 (build_string ("Unable to append argument"), object);
	  return;
	}

      case DBUS_TYPE_INT16:
	CHECK_NUMBER (object);
	{
	  dbus_int16_t val = XINT (object);
	  XD_DEBUG_MESSAGE ("%c %d", dtype, (int) val);
	  if (!dbus_message_iter_append_basic (iter, dtype, &val))
	    XD_SIGNAL2 (build_string ("Unable to append argument"), object);
	  return;
	}

      case DBUS_TYPE_UINT16:
	CHECK_NUMBER (object);
	{
	  dbus_uint16_t val = XUINT (object);
	  XD_DEBUG_MESSAGE ("%c %u", dtype, (unsigned int) val);
	  if (!dbus_message_iter_append_basic (iter, dtype, &val))
	    XD_SIGNAL2 (build_string ("Unable to append argument"), object);
	  return;
	}

      case DBUS_TYPE_INT32:
	CHECK_NUMBER (object);
	{
	  dbus_int32_t val = XINT (object);
	  XD_DEBUG_MESSAGE ("%c %d", dtype, val);
	  if (!dbus_message_iter_append_basic (iter, dtype, &val))
	    XD_SIGNAL2 (build_string ("Unable to append argument"), object);
	  return;
	}

      case DBUS_TYPE_UINT32:
	CHECK_NUMBER (object);
	{
	  dbus_uint32_t val = XUINT (object);
	  XD_DEBUG_MESSAGE ("%c %u", dtype, val);
	  if (!dbus_message_iter_append_basic (iter, dtype, &val))
	    XD_SIGNAL2 (build_string ("Unable to append argument"), object);
	  return;
	}

      case DBUS_TYPE_INT64:
	CHECK_NUMBER (object);
	{
	  dbus_int64_t val = XINT (object);
	  XD_DEBUG_MESSAGE ("%c %d", dtype, (int) val);
	  if (!dbus_message_iter_append_basic (iter, dtype, &val))
	    XD_SIGNAL2 (build_string ("Unable to append argument"), object);
	  return;
	}

      case DBUS_TYPE_UINT64:
	CHECK_NUMBER (object);
	{
	  dbus_uint64_t val = XUINT (object);
	  XD_DEBUG_MESSAGE ("%c %u", dtype, (unsigned int) val);
	  if (!dbus_message_iter_append_basic (iter, dtype, &val))
	    XD_SIGNAL2 (build_string ("Unable to append argument"), object);
	  return;
	}

      case DBUS_TYPE_DOUBLE:
	CHECK_FLOAT (object);
	{
	  double val = XFLOAT_DATA (object);
	  XD_DEBUG_MESSAGE ("%c %f", dtype, val);
	  if (!dbus_message_iter_append_basic (iter, dtype, &val))
	    XD_SIGNAL2 (build_string ("Unable to append argument"), object);
	  return;
	}

      case DBUS_TYPE_STRING:
      case DBUS_TYPE_OBJECT_PATH:
      case DBUS_TYPE_SIGNATURE:
	CHECK_STRING (object);
	{
	  /* We need to send a valid UTF-8 string.  We could encode `object'
	     but by not encoding it, we guarantee it's valid utf-8, even if
	     it contains eight-bit-bytes.  Of course, you can still send
	     manually-crafted junk by passing a unibyte string.  */
	  char *val = SDATA (object);
	  XD_DEBUG_MESSAGE ("%c %s", dtype, val);
	  if (!dbus_message_iter_append_basic (iter, dtype, &val))
	    XD_SIGNAL2 (build_string ("Unable to append argument"), object);
	  return;
	}
      }

  else /* Compound types.  */
    {

      /* All compound types except array have a type symbol.  For
	 array, it is optional.  Skip it.  */
      if (!XD_BASIC_DBUS_TYPE (XD_OBJECT_TO_DBUS_TYPE (CAR_SAFE (object))))
	object = XD_NEXT_VALUE (object);

      /* Open new subiteration.  */
      switch (dtype)
	{
	case DBUS_TYPE_ARRAY:
	  /* An array has only elements of the same type.  So it is
	     sufficient to check the first element's signature
	     only.  */

	  if (NILP (object))
	    /* If the array is empty, DBUS_TYPE_STRING is the default
	       element type.  */
	    strcpy (signature, DBUS_TYPE_STRING_AS_STRING);

	  else
	    /* If the element type is DBUS_TYPE_SIGNATURE, and this is
	       the only element, the value of this element is used as
	       the array's element signature.  */
	    if ((XD_OBJECT_TO_DBUS_TYPE (CAR_SAFE (object))
		 == DBUS_TYPE_SIGNATURE)
		&& STRINGP (CAR_SAFE (XD_NEXT_VALUE (object)))
		&& NILP (CDR_SAFE (XD_NEXT_VALUE (object))))
	      {
		strcpy (signature, SDATA (CAR_SAFE (XD_NEXT_VALUE (object))));
		object = CDR_SAFE (XD_NEXT_VALUE (object));
	      }

	    else
	      xd_signature (signature,
			    XD_OBJECT_TO_DBUS_TYPE (CAR_SAFE (object)),
			    dtype, CAR_SAFE (XD_NEXT_VALUE (object)));

	  XD_DEBUG_MESSAGE ("%c %s %s", dtype, signature,
			    SDATA (format2 ("%s", object, Qnil)));
	  if (!dbus_message_iter_open_container (iter, dtype,
						 signature, &subiter))
	    XD_SIGNAL3 (build_string ("Cannot open container"),
			make_number (dtype), build_string (signature));
	  break;

	case DBUS_TYPE_VARIANT:
	  /* A variant has just one element.  */
	  xd_signature (signature, XD_OBJECT_TO_DBUS_TYPE (CAR_SAFE (object)),
			dtype, CAR_SAFE (XD_NEXT_VALUE (object)));

	  XD_DEBUG_MESSAGE ("%c %s %s", dtype, signature,
			    SDATA (format2 ("%s", object, Qnil)));
	  if (!dbus_message_iter_open_container (iter, dtype,
						 signature, &subiter))
	    XD_SIGNAL3 (build_string ("Cannot open container"),
			make_number (dtype), build_string (signature));
	  break;

	case DBUS_TYPE_STRUCT:
	case DBUS_TYPE_DICT_ENTRY:
	  /* These containers do not require a signature.  */
	  XD_DEBUG_MESSAGE ("%c %s", dtype,
			    SDATA (format2 ("%s", object, Qnil)));
	  if (!dbus_message_iter_open_container (iter, dtype, NULL, &subiter))
	    XD_SIGNAL2 (build_string ("Cannot open container"),
			make_number (dtype));
	  break;
	}

      /* Loop over list elements.  */
      while (!NILP (object))
	{
	  dtype = XD_OBJECT_TO_DBUS_TYPE (CAR_SAFE (object));
	  object = XD_NEXT_VALUE (object);

	  xd_append_arg (dtype, CAR_SAFE (object), &subiter);

	  object = CDR_SAFE (object);
	}

      /* Close the subiteration.  */
      if (!dbus_message_iter_close_container (iter, &subiter))
	XD_SIGNAL2 (build_string ("Cannot close container"),
		    make_number (dtype));
    }
}

/* Retrieve C value from a DBusMessageIter structure ITER, and return
   a converted Lisp object.  The type DTYPE of the argument of the
   D-Bus message must be a valid DBusType.  Compound D-Bus types
   result always in a Lisp list.  */
static Lisp_Object
xd_retrieve_arg (unsigned int dtype, DBusMessageIter *iter)
{

  switch (dtype)
    {
    case DBUS_TYPE_BYTE:
      {
	unsigned int val;
	dbus_message_iter_get_basic (iter, &val);
	val = val & 0xFF;
	XD_DEBUG_MESSAGE ("%c %d", dtype, val);
	return make_number (val);
      }

    case DBUS_TYPE_BOOLEAN:
      {
	dbus_bool_t val;
	dbus_message_iter_get_basic (iter, &val);
	XD_DEBUG_MESSAGE ("%c %s", dtype, (val == FALSE) ? "false" : "true");
	return (val == FALSE) ? Qnil : Qt;
      }

    case DBUS_TYPE_INT16:
      {
	dbus_int16_t val;
	dbus_message_iter_get_basic (iter, &val);
	XD_DEBUG_MESSAGE ("%c %d", dtype, val);
	return make_number (val);
      }

    case DBUS_TYPE_UINT16:
      {
	dbus_uint16_t val;
	dbus_message_iter_get_basic (iter, &val);
	XD_DEBUG_MESSAGE ("%c %d", dtype, val);
	return make_number (val);
      }

    case DBUS_TYPE_INT32:
      {
	dbus_int32_t val;
	dbus_message_iter_get_basic (iter, &val);
	XD_DEBUG_MESSAGE ("%c %d", dtype, val);
	return make_fixnum_or_float (val);
      }

    case DBUS_TYPE_UINT32:
      {
	dbus_uint32_t val;
	dbus_message_iter_get_basic (iter, &val);
	XD_DEBUG_MESSAGE ("%c %d", dtype, val);
	return make_fixnum_or_float (val);
      }

    case DBUS_TYPE_INT64:
      {
	dbus_int64_t val;
	dbus_message_iter_get_basic (iter, &val);
	XD_DEBUG_MESSAGE ("%c %d", dtype, (int) val);
	return make_fixnum_or_float (val);
      }

    case DBUS_TYPE_UINT64:
      {
	dbus_uint64_t val;
	dbus_message_iter_get_basic (iter, &val);
	XD_DEBUG_MESSAGE ("%c %d", dtype, (int) val);
	return make_fixnum_or_float (val);
      }

    case DBUS_TYPE_DOUBLE:
      {
	double val;
	dbus_message_iter_get_basic (iter, &val);
	XD_DEBUG_MESSAGE ("%c %f", dtype, val);
	return make_float (val);
      }

    case DBUS_TYPE_STRING:
    case DBUS_TYPE_OBJECT_PATH:
    case DBUS_TYPE_SIGNATURE:
      {
	char *val;
	dbus_message_iter_get_basic (iter, &val);
	XD_DEBUG_MESSAGE ("%c %s", dtype, val);
	return build_string (val);
      }

    case DBUS_TYPE_ARRAY:
    case DBUS_TYPE_VARIANT:
    case DBUS_TYPE_STRUCT:
    case DBUS_TYPE_DICT_ENTRY:
      {
	Lisp_Object result;
	struct gcpro gcpro1;
	DBusMessageIter subiter;
	int subtype;
	result = Qnil;
	GCPRO1 (result);
	dbus_message_iter_recurse (iter, &subiter);
	while ((subtype = dbus_message_iter_get_arg_type (&subiter))
	       != DBUS_TYPE_INVALID)
	  {
	    result = Fcons (xd_retrieve_arg (subtype, &subiter), result);
	    dbus_message_iter_next (&subiter);
	  }
	XD_DEBUG_MESSAGE ("%c %s", dtype, SDATA (format2 ("%s", result, Qnil)));
	RETURN_UNGCPRO (Fnreverse (result));
      }

    default:
      XD_DEBUG_MESSAGE ("DBusType '%c' not supported", dtype);
      return Qnil;
    }
}

/* Initialize D-Bus connection.  BUS is either a Lisp symbol, :system
   or :session, or a string denoting the bus address.  It tells which
   D-Bus to initialize.  If RAISE_ERROR is non-zero, signal an error
   when the connection cannot be initialized.  */
static DBusConnection *
xd_initialize (Lisp_Object bus, int raise_error)
{
  DBusConnection *connection;
  DBusError derror;

  /* Parameter check.  */
  if (!STRINGP (bus))
    {
      CHECK_SYMBOL (bus);
      if (!(EQ (bus, QCdbus_system_bus) || EQ (bus, QCdbus_session_bus)))
	{
	  if (raise_error)
	    XD_SIGNAL2 (build_string ("Wrong bus name"), bus);
	  else
	    return NULL;
	}

      /* We do not want to have an autolaunch for the session bus.  */
      if (EQ (bus, QCdbus_session_bus)
	  && getenv ("DBUS_SESSION_BUS_ADDRESS") == NULL)
	{
	  if (raise_error)
	    XD_SIGNAL2 (build_string ("No connection to bus"), bus);
	  else
	    return NULL;
	}
    }

  /* Open a connection to the bus.  */
  dbus_error_init (&derror);

  if (STRINGP (bus))
      connection = dbus_connection_open (SDATA (bus), &derror);
  else
    if (EQ (bus, QCdbus_system_bus))
      connection = dbus_bus_get (DBUS_BUS_SYSTEM, &derror);
    else
      connection = dbus_bus_get (DBUS_BUS_SESSION, &derror);

  if (dbus_error_is_set (&derror))
    {
      if (raise_error)
	XD_ERROR (derror);
      else
	connection = NULL;
    }

  /* If it is not the system or session bus, we must register
     ourselves.  Otherwise, we have called dbus_bus_get, which has
     configured us to exit if the connection closes - we undo this
     setting.  */
  if (connection != NULL)
    {
      if (STRINGP (bus))
	dbus_bus_register (connection, &derror);
      else
	dbus_connection_set_exit_on_disconnect (connection, FALSE);
    }

  if (dbus_error_is_set (&derror))
    {
      if (raise_error)
	XD_ERROR (derror);
      else
	connection = NULL;
    }

  if (connection == NULL && raise_error)
    XD_SIGNAL2 (build_string ("No connection to bus"), bus);

  /* Cleanup.  */
  dbus_error_free (&derror);

  /* Return the result.  */
  return connection;
}


/* Add connection file descriptor to input_wait_mask, in order to
   let select() detect, whether a new message has been arrived.  */
dbus_bool_t
xd_add_watch (DBusWatch *watch, void *data)
{
  /* We check only for incoming data.  */
  if (dbus_watch_get_flags (watch) & DBUS_WATCH_READABLE)
    {
#if HAVE_DBUS_WATCH_GET_UNIX_FD
      /* TODO: Reverse these on Win32, which prefers the opposite.  */
      int fd = dbus_watch_get_unix_fd(watch);
      if (fd == -1)
	fd = dbus_watch_get_socket(watch);
#else
      int fd = dbus_watch_get_fd(watch);
#endif
      XD_DEBUG_MESSAGE ("fd %d", fd);

      if (fd == -1)
	return FALSE;

      /* Add the file descriptor to input_wait_mask.  */
      add_keyboard_wait_descriptor (fd);
    }

  /* Return.  */
  return TRUE;
}

/* Remove connection file descriptor from input_wait_mask.  DATA is
   the used bus, either a string or QCdbus_system_bus or
   QCdbus_session_bus.  */
void
xd_remove_watch (DBusWatch *watch, void *data)
{
  /* We check only for incoming data.  */
  if (dbus_watch_get_flags (watch) & DBUS_WATCH_READABLE)
    {
#if HAVE_DBUS_WATCH_GET_UNIX_FD
      /* TODO: Reverse these on Win32, which prefers the opposite.  */
      int fd = dbus_watch_get_unix_fd(watch);
      if (fd == -1)
	fd = dbus_watch_get_socket(watch);
#else
      int fd = dbus_watch_get_fd(watch);
#endif
      XD_DEBUG_MESSAGE ("fd %d", fd);

      if (fd == -1)
	return;

      /* Unset session environment.  */
      if ((data != NULL) && (data == (void*) XHASH (QCdbus_session_bus)))
	{
	  XD_DEBUG_MESSAGE ("unsetenv DBUS_SESSION_BUS_ADDRESS");
	  unsetenv ("DBUS_SESSION_BUS_ADDRESS");
	}

      /* Remove the file descriptor from input_wait_mask.  */
      delete_keyboard_wait_descriptor (fd);
    }

  /* Return.  */
  return;
}

DEFUN ("dbus-init-bus", Fdbus_init_bus, Sdbus_init_bus, 1, 1, 0,
       doc: /* Initialize connection to D-Bus BUS.  */)
  (Lisp_Object bus)
{
  DBusConnection *connection;

  /* Open a connection to the bus.  */
  connection = xd_initialize (bus, TRUE);

  /* Add the watch functions.  We pass also the bus as data, in order
     to distinguish between the busses in xd_remove_watch.  */
  if (!dbus_connection_set_watch_functions (connection,
					    xd_add_watch,
					    xd_remove_watch,
					    NULL, (void*) XHASH (bus), NULL))
    XD_SIGNAL1 (build_string ("Cannot add watch functions"));

  /* Add bus to list of registered buses.  */
  Vdbus_registered_buses =  Fcons (bus, Vdbus_registered_buses);

  /* Return.  */
  return Qnil;
}

DEFUN ("dbus-close-bus", Fdbus_close_bus, Sdbus_close_bus, 1, 1, 0,
       doc: /* Close connection to D-Bus BUS.  */)
  (Lisp_Object bus)
{
  DBusConnection *connection;

  /* Open a connection to the bus.  */
  connection = xd_initialize (bus, TRUE);

  /* Decrement reference count to the bus.  */
  dbus_connection_unref (connection);

  /* Remove bus from list of registered buses.  */
  Vdbus_registered_buses = Fdelete (bus, Vdbus_registered_buses);

  /* Return.  */
  return Qnil;
}

DEFUN ("dbus-get-unique-name", Fdbus_get_unique_name, Sdbus_get_unique_name,
       1, 1, 0,
       doc: /* Return the unique name of Emacs registered at D-Bus BUS.  */)
  (Lisp_Object bus)
{
  DBusConnection *connection;
  const char *name;

  /* Open a connection to the bus.  */
  connection = xd_initialize (bus, TRUE);

  /* Request the name.  */
  name = dbus_bus_get_unique_name (connection);
  if (name == NULL)
    XD_SIGNAL1 (build_string ("No unique name available"));

  /* Return.  */
  return build_string (name);
}

DEFUN ("dbus-call-method", Fdbus_call_method, Sdbus_call_method, 5, MANY, 0,
       doc: /* Call METHOD on the D-Bus BUS.

BUS is either a Lisp symbol, `:system' or `:session', or a string
denoting the bus address.

SERVICE is the D-Bus service name to be used.  PATH is the D-Bus
object path SERVICE is registered at.  INTERFACE is an interface
offered by SERVICE.  It must provide METHOD.

If the parameter `:timeout' is given, the following integer TIMEOUT
specifies the maximum number of milliseconds the method call must
return.  The default value is 25,000.  If the method call doesn't
return in time, a D-Bus error is raised.

All other arguments ARGS are passed to METHOD as arguments.  They are
converted into D-Bus types via the following rules:

  t and nil => DBUS_TYPE_BOOLEAN
  number    => DBUS_TYPE_UINT32
  integer   => DBUS_TYPE_INT32
  float     => DBUS_TYPE_DOUBLE
  string    => DBUS_TYPE_STRING
  list      => DBUS_TYPE_ARRAY

All arguments can be preceded by a type symbol.  For details about
type symbols, see Info node `(dbus)Type Conversion'.

`dbus-call-method' returns the resulting values of METHOD as a list of
Lisp objects.  The type conversion happens the other direction as for
input arguments.  It follows the mapping rules:

  DBUS_TYPE_BOOLEAN     => t or nil
  DBUS_TYPE_BYTE        => number
  DBUS_TYPE_UINT16      => number
  DBUS_TYPE_INT16       => integer
  DBUS_TYPE_UINT32      => number or float
  DBUS_TYPE_INT32       => integer or float
  DBUS_TYPE_UINT64      => number or float
  DBUS_TYPE_INT64       => integer or float
  DBUS_TYPE_DOUBLE      => float
  DBUS_TYPE_STRING      => string
  DBUS_TYPE_OBJECT_PATH => string
  DBUS_TYPE_SIGNATURE   => string
  DBUS_TYPE_ARRAY       => list
  DBUS_TYPE_VARIANT     => list
  DBUS_TYPE_STRUCT      => list
  DBUS_TYPE_DICT_ENTRY  => list

Example:

\(dbus-call-method
  :session "org.gnome.seahorse" "/org/gnome/seahorse/keys/openpgp"
  "org.gnome.seahorse.Keys" "GetKeyField"
  "openpgp:657984B8C7A966DD" "simple-name")

  => (t ("Philip R. Zimmermann"))

If the result of the METHOD call is just one value, the converted Lisp
object is returned instead of a list containing this single Lisp object.

\(dbus-call-method
  :system "org.freedesktop.Hal" "/org/freedesktop/Hal/devices/computer"
  "org.freedesktop.Hal.Device" "GetPropertyString"
  "system.kernel.machine")

  => "i686"

usage: (dbus-call-method BUS SERVICE PATH INTERFACE METHOD &optional :timeout TIMEOUT &rest ARGS)  */)
  (int nargs, register Lisp_Object *args)
{
  Lisp_Object bus, service, path, interface, method;
  Lisp_Object result;
  struct gcpro gcpro1, gcpro2, gcpro3, gcpro4, gcpro5;
  DBusConnection *connection;
  DBusMessage *dmessage;
  DBusMessage *reply;
  DBusMessageIter iter;
  DBusError derror;
  unsigned int dtype;
  int timeout = -1;
  int i = 5;
  char signature[DBUS_MAXIMUM_SIGNATURE_LENGTH];

  /* Check parameters.  */
  bus = args[0];
  service = args[1];
  path = args[2];
  interface = args[3];
  method = args[4];

  CHECK_STRING (service);
  CHECK_STRING (path);
  CHECK_STRING (interface);
  CHECK_STRING (method);
  GCPRO5 (bus, service, path, interface, method);

  XD_DEBUG_MESSAGE ("%s %s %s %s",
		    SDATA (service),
		    SDATA (path),
		    SDATA (interface),
		    SDATA (method));

  /* Open a connection to the bus.  */
  connection = xd_initialize (bus, TRUE);

  /* Create the message.  */
  dmessage = dbus_message_new_method_call (SDATA (service),
					   SDATA (path),
					   SDATA (interface),
					   SDATA (method));
  UNGCPRO;
  if (dmessage == NULL)
    XD_SIGNAL1 (build_string ("Unable to create a new message"));

  /* Check for timeout parameter.  */
  if ((i+2 <= nargs) && (EQ ((args[i]), QCdbus_timeout)))
    {
      CHECK_NATNUM (args[i+1]);
      timeout = XUINT (args[i+1]);
      i = i+2;
    }

  /* Initialize parameter list of message.  */
  dbus_message_iter_init_append (dmessage, &iter);

  /* Append parameters to the message.  */
  for (; i < nargs; ++i)
    {
      dtype = XD_OBJECT_TO_DBUS_TYPE (args[i]);
      if (XD_DBUS_TYPE_P (args[i]))
	{
	  XD_DEBUG_VALID_LISP_OBJECT_P (args[i]);
	  XD_DEBUG_VALID_LISP_OBJECT_P (args[i+1]);
	  XD_DEBUG_MESSAGE ("Parameter%d %s %s", i-4,
			    SDATA (format2 ("%s", args[i], Qnil)),
			    SDATA (format2 ("%s", args[i+1], Qnil)));
	  ++i;
	}
      else
	{
	  XD_DEBUG_VALID_LISP_OBJECT_P (args[i]);
	  XD_DEBUG_MESSAGE ("Parameter%d %s", i-4,
			    SDATA (format2 ("%s", args[i], Qnil)));
	}

      /* Check for valid signature.  We use DBUS_TYPE_INVALID as
	 indication that there is no parent type.  */
      xd_signature (signature, dtype, DBUS_TYPE_INVALID, args[i]);

      xd_append_arg (dtype, args[i], &iter);
    }

  /* Send the message.  */
  dbus_error_init (&derror);
  reply = dbus_connection_send_with_reply_and_block (connection,
						     dmessage,
						     timeout,
						     &derror);

  if (dbus_error_is_set (&derror))
    XD_ERROR (derror);

  if (reply == NULL)
    XD_SIGNAL1 (build_string ("No reply"));

  XD_DEBUG_MESSAGE ("Message sent");

  /* Collect the results.  */
  result = Qnil;
  GCPRO1 (result);

  if (dbus_message_iter_init (reply, &iter))
    {
      /* Loop over the parameters of the D-Bus reply message.  Construct a
	 Lisp list, which is returned by `dbus-call-method'.  */
      while ((dtype = dbus_message_iter_get_arg_type (&iter))
	     != DBUS_TYPE_INVALID)
	{
	  result = Fcons (xd_retrieve_arg (dtype, &iter), result);
	  dbus_message_iter_next (&iter);
	}
    }
  else
    {
      /* No arguments: just return nil.  */
    }

  /* Cleanup.  */
  dbus_error_free (&derror);
  dbus_message_unref (dmessage);
  dbus_message_unref (reply);

  /* Return the result.  If there is only one single Lisp object,
     return it as-it-is, otherwise return the reversed list.  */
  if (XUINT (Flength (result)) == 1)
    RETURN_UNGCPRO (CAR_SAFE (result));
  else
    RETURN_UNGCPRO (Fnreverse (result));
}

DEFUN ("dbus-call-method-asynchronously", Fdbus_call_method_asynchronously,
       Sdbus_call_method_asynchronously, 6, MANY, 0,
       doc: /* Call METHOD on the D-Bus BUS asynchronously.

BUS is either a Lisp symbol, `:system' or `:session', or a string
denoting the bus address.

SERVICE is the D-Bus service name to be used.  PATH is the D-Bus
object path SERVICE is registered at.  INTERFACE is an interface
offered by SERVICE.  It must provide METHOD.

HANDLER is a Lisp function, which is called when the corresponding
return message has arrived.  If HANDLER is nil, no return message will
be expected.

If the parameter `:timeout' is given, the following integer TIMEOUT
specifies the maximum number of milliseconds the method call must
return.  The default value is 25,000.  If the method call doesn't
return in time, a D-Bus error is raised.

All other arguments ARGS are passed to METHOD as arguments.  They are
converted into D-Bus types via the following rules:

  t and nil => DBUS_TYPE_BOOLEAN
  number    => DBUS_TYPE_UINT32
  integer   => DBUS_TYPE_INT32
  float     => DBUS_TYPE_DOUBLE
  string    => DBUS_TYPE_STRING
  list      => DBUS_TYPE_ARRAY

All arguments can be preceded by a type symbol.  For details about
type symbols, see Info node `(dbus)Type Conversion'.

Unless HANDLER is nil, the function returns a key into the hash table
`dbus-registered-objects-table'.  The corresponding entry in the hash
table is removed, when the return message has been arrived, and
HANDLER is called.

Example:

\(dbus-call-method-asynchronously
  :system "org.freedesktop.Hal" "/org/freedesktop/Hal/devices/computer"
  "org.freedesktop.Hal.Device" "GetPropertyString" 'message
  "system.kernel.machine")

  => (:system 2)

  -| i686

usage: (dbus-call-method-asynchronously BUS SERVICE PATH INTERFACE METHOD HANDLER &optional :timeout TIMEOUT &rest ARGS)  */)
  (int nargs, register Lisp_Object *args)
{
  Lisp_Object bus, service, path, interface, method, handler;
  Lisp_Object result;
  struct gcpro gcpro1, gcpro2, gcpro3, gcpro4, gcpro5, gcpro6;
  DBusConnection *connection;
  DBusMessage *dmessage;
  DBusMessageIter iter;
  unsigned int dtype;
  int timeout = -1;
  int i = 6;
  char signature[DBUS_MAXIMUM_SIGNATURE_LENGTH];

  /* Check parameters.  */
  bus = args[0];
  service = args[1];
  path = args[2];
  interface = args[3];
  method = args[4];
  handler = args[5];

  CHECK_STRING (service);
  CHECK_STRING (path);
  CHECK_STRING (interface);
  CHECK_STRING (method);
  if (!NILP (handler) && !FUNCTIONP (handler))
    wrong_type_argument (intern ("functionp"), handler);
  GCPRO6 (bus, service, path, interface, method, handler);

  XD_DEBUG_MESSAGE ("%s %s %s %s",
		    SDATA (service),
		    SDATA (path),
		    SDATA (interface),
		    SDATA (method));

  /* Open a connection to the bus.  */
  connection = xd_initialize (bus, TRUE);

  /* Create the message.  */
  dmessage = dbus_message_new_method_call (SDATA (service),
					   SDATA (path),
					   SDATA (interface),
					   SDATA (method));
  if (dmessage == NULL)
    XD_SIGNAL1 (build_string ("Unable to create a new message"));

  /* Check for timeout parameter.  */
  if ((i+2 <= nargs) && (EQ ((args[i]), QCdbus_timeout)))
    {
      CHECK_NATNUM (args[i+1]);
      timeout = XUINT (args[i+1]);
      i = i+2;
    }

  /* Initialize parameter list of message.  */
  dbus_message_iter_init_append (dmessage, &iter);

  /* Append parameters to the message.  */
  for (; i < nargs; ++i)
    {
      dtype = XD_OBJECT_TO_DBUS_TYPE (args[i]);
      if (XD_DBUS_TYPE_P (args[i]))
	{
	  XD_DEBUG_VALID_LISP_OBJECT_P (args[i]);
	  XD_DEBUG_VALID_LISP_OBJECT_P (args[i+1]);
	  XD_DEBUG_MESSAGE ("Parameter%d %s %s", i-4,
			    SDATA (format2 ("%s", args[i], Qnil)),
			    SDATA (format2 ("%s", args[i+1], Qnil)));
	  ++i;
	}
      else
	{
	  XD_DEBUG_VALID_LISP_OBJECT_P (args[i]);
	  XD_DEBUG_MESSAGE ("Parameter%d %s", i-4,
			    SDATA (format2 ("%s", args[i], Qnil)));
	}

      /* Check for valid signature.  We use DBUS_TYPE_INVALID as
	 indication that there is no parent type.  */
      xd_signature (signature, dtype, DBUS_TYPE_INVALID, args[i]);

      xd_append_arg (dtype, args[i], &iter);
    }

  if (!NILP (handler))
    {
      /* Send the message.  The message is just added to the outgoing
	 message queue.  */
      if (!dbus_connection_send_with_reply (connection, dmessage,
					    NULL, timeout))
	XD_SIGNAL1 (build_string ("Cannot send message"));

      /* The result is the key in Vdbus_registered_objects_table.  */
      result = (list2 (bus, make_number (dbus_message_get_serial (dmessage))));

      /* Create a hash table entry.  */
      Fputhash (result, handler, Vdbus_registered_objects_table);
    }
  else
    {
      /* Send the message.  The message is just added to the outgoing
	 message queue.  */
      if (!dbus_connection_send (connection, dmessage, NULL))
	XD_SIGNAL1 (build_string ("Cannot send message"));

      result = Qnil;
    }

  /* Flush connection to ensure the message is handled.  */
  dbus_connection_flush (connection);

  XD_DEBUG_MESSAGE ("Message sent");

  /* Cleanup.  */
  dbus_message_unref (dmessage);

  /* Return the result.  */
  RETURN_UNGCPRO (result);
}

DEFUN ("dbus-method-return-internal", Fdbus_method_return_internal,
       Sdbus_method_return_internal,
       3, MANY, 0,
       doc: /* Return for message SERIAL on the D-Bus BUS.
This is an internal function, it shall not be used outside dbus.el.

usage: (dbus-method-return-internal BUS SERIAL SERVICE &rest ARGS)  */)
  (int nargs, register Lisp_Object *args)
{
  Lisp_Object bus, serial, service;
  struct gcpro gcpro1, gcpro2, gcpro3;
  DBusConnection *connection;
  DBusMessage *dmessage;
  DBusMessageIter iter;
  unsigned int dtype;
  int i;
  char signature[DBUS_MAXIMUM_SIGNATURE_LENGTH];

  /* Check parameters.  */
  bus = args[0];
  serial = args[1];
  service = args[2];

  CHECK_NUMBER (serial);
  CHECK_STRING (service);
  GCPRO3 (bus, serial, service);

  XD_DEBUG_MESSAGE ("%lu %s ", (unsigned long) XUINT (serial), SDATA (service));

  /* Open a connection to the bus.  */
  connection = xd_initialize (bus, TRUE);

  /* Create the message.  */
  dmessage = dbus_message_new (DBUS_MESSAGE_TYPE_METHOD_RETURN);
  if ((dmessage == NULL)
      || (!dbus_message_set_reply_serial (dmessage, XUINT (serial)))
      || (!dbus_message_set_destination (dmessage, SDATA (service))))
    {
      UNGCPRO;
      XD_SIGNAL1 (build_string ("Unable to create a return message"));
    }

  UNGCPRO;

  /* Initialize parameter list of message.  */
  dbus_message_iter_init_append (dmessage, &iter);

  /* Append parameters to the message.  */
  for (i = 3; i < nargs; ++i)
    {
      dtype = XD_OBJECT_TO_DBUS_TYPE (args[i]);
      if (XD_DBUS_TYPE_P (args[i]))
	{
	  XD_DEBUG_VALID_LISP_OBJECT_P (args[i]);
	  XD_DEBUG_VALID_LISP_OBJECT_P (args[i+1]);
	  XD_DEBUG_MESSAGE ("Parameter%d %s %s", i-2,
			    SDATA (format2 ("%s", args[i], Qnil)),
			    SDATA (format2 ("%s", args[i+1], Qnil)));
	  ++i;
	}
      else
	{
	  XD_DEBUG_VALID_LISP_OBJECT_P (args[i]);
	  XD_DEBUG_MESSAGE ("Parameter%d %s", i-2,
			    SDATA (format2 ("%s", args[i], Qnil)));
	}

      /* Check for valid signature.  We use DBUS_TYPE_INVALID as
	 indication that there is no parent type.  */
      xd_signature (signature, dtype, DBUS_TYPE_INVALID, args[i]);

      xd_append_arg (dtype, args[i], &iter);
    }

  /* Send the message.  The message is just added to the outgoing
     message queue.  */
  if (!dbus_connection_send (connection, dmessage, NULL))
    XD_SIGNAL1 (build_string ("Cannot send message"));

  /* Flush connection to ensure the message is handled.  */
  dbus_connection_flush (connection);

  XD_DEBUG_MESSAGE ("Message sent");

  /* Cleanup.  */
  dbus_message_unref (dmessage);

  /* Return.  */
  return Qt;
}

DEFUN ("dbus-method-error-internal", Fdbus_method_error_internal,
       Sdbus_method_error_internal,
       3, MANY, 0,
       doc: /* Return error message for message SERIAL on the D-Bus BUS.
This is an internal function, it shall not be used outside dbus.el.

usage: (dbus-method-error-internal BUS SERIAL SERVICE &rest ARGS)  */)
  (int nargs, register Lisp_Object *args)
{
  Lisp_Object bus, serial, service;
  struct gcpro gcpro1, gcpro2, gcpro3;
  DBusConnection *connection;
  DBusMessage *dmessage;
  DBusMessageIter iter;
  unsigned int dtype;
  int i;
  char signature[DBUS_MAXIMUM_SIGNATURE_LENGTH];

  /* Check parameters.  */
  bus = args[0];
  serial = args[1];
  service = args[2];

  CHECK_NUMBER (serial);
  CHECK_STRING (service);
  GCPRO3 (bus, serial, service);

  XD_DEBUG_MESSAGE ("%lu %s ", (unsigned long) XUINT (serial), SDATA (service));

  /* Open a connection to the bus.  */
  connection = xd_initialize (bus, TRUE);

  /* Create the message.  */
  dmessage = dbus_message_new (DBUS_MESSAGE_TYPE_ERROR);
  if ((dmessage == NULL)
      || (!dbus_message_set_error_name (dmessage, DBUS_ERROR_FAILED))
      || (!dbus_message_set_reply_serial (dmessage, XUINT (serial)))
      || (!dbus_message_set_destination (dmessage, SDATA (service))))
    {
      UNGCPRO;
      XD_SIGNAL1 (build_string ("Unable to create a error message"));
    }

  UNGCPRO;

  /* Initialize parameter list of message.  */
  dbus_message_iter_init_append (dmessage, &iter);

  /* Append parameters to the message.  */
  for (i = 3; i < nargs; ++i)
    {
      dtype = XD_OBJECT_TO_DBUS_TYPE (args[i]);
      if (XD_DBUS_TYPE_P (args[i]))
	{
	  XD_DEBUG_VALID_LISP_OBJECT_P (args[i]);
	  XD_DEBUG_VALID_LISP_OBJECT_P (args[i+1]);
	  XD_DEBUG_MESSAGE ("Parameter%d %s %s", i-2,
			    SDATA (format2 ("%s", args[i], Qnil)),
			    SDATA (format2 ("%s", args[i+1], Qnil)));
	  ++i;
	}
      else
	{
	  XD_DEBUG_VALID_LISP_OBJECT_P (args[i]);
	  XD_DEBUG_MESSAGE ("Parameter%d %s", i-2,
			    SDATA (format2 ("%s", args[i], Qnil)));
	}

      /* Check for valid signature.  We use DBUS_TYPE_INVALID as
	 indication that there is no parent type.  */
      xd_signature (signature, dtype, DBUS_TYPE_INVALID, args[i]);

      xd_append_arg (dtype, args[i], &iter);
    }

  /* Send the message.  The message is just added to the outgoing
     message queue.  */
  if (!dbus_connection_send (connection, dmessage, NULL))
    XD_SIGNAL1 (build_string ("Cannot send message"));

  /* Flush connection to ensure the message is handled.  */
  dbus_connection_flush (connection);

  XD_DEBUG_MESSAGE ("Message sent");

  /* Cleanup.  */
  dbus_message_unref (dmessage);

  /* Return.  */
  return Qt;
}

DEFUN ("dbus-send-signal", Fdbus_send_signal, Sdbus_send_signal, 5, MANY, 0,
       doc: /* Send signal SIGNAL on the D-Bus BUS.

BUS is either a Lisp symbol, `:system' or `:session', or a string
denoting the bus address.

SERVICE is the D-Bus service name SIGNAL is sent from.  PATH is the
D-Bus object path SERVICE is registered at.  INTERFACE is an interface
offered by SERVICE.  It must provide signal SIGNAL.

All other arguments ARGS are passed to SIGNAL as arguments.  They are
converted into D-Bus types via the following rules:

  t and nil => DBUS_TYPE_BOOLEAN
  number    => DBUS_TYPE_UINT32
  integer   => DBUS_TYPE_INT32
  float     => DBUS_TYPE_DOUBLE
  string    => DBUS_TYPE_STRING
  list      => DBUS_TYPE_ARRAY

All arguments can be preceded by a type symbol.  For details about
type symbols, see Info node `(dbus)Type Conversion'.

Example:

\(dbus-send-signal
  :session "org.gnu.Emacs" "/org/gnu/Emacs"
  "org.gnu.Emacs.FileManager" "FileModified" "/home/albinus/.emacs")

usage: (dbus-send-signal BUS SERVICE PATH INTERFACE SIGNAL &rest ARGS)  */)
  (int nargs, register Lisp_Object *args)
{
  Lisp_Object bus, service, path, interface, signal;
  struct gcpro gcpro1, gcpro2, gcpro3, gcpro4, gcpro5;
  DBusConnection *connection;
  DBusMessage *dmessage;
  DBusMessageIter iter;
  unsigned int dtype;
  int i;
  char signature[DBUS_MAXIMUM_SIGNATURE_LENGTH];

  /* Check parameters.  */
  bus = args[0];
  service = args[1];
  path = args[2];
  interface = args[3];
  signal = args[4];

  CHECK_STRING (service);
  CHECK_STRING (path);
  CHECK_STRING (interface);
  CHECK_STRING (signal);
  GCPRO5 (bus, service, path, interface, signal);

  XD_DEBUG_MESSAGE ("%s %s %s %s",
		    SDATA (service),
		    SDATA (path),
		    SDATA (interface),
		    SDATA (signal));

  /* Open a connection to the bus.  */
  connection = xd_initialize (bus, TRUE);

  /* Create the message.  */
  dmessage = dbus_message_new_signal (SDATA (path),
				      SDATA (interface),
				      SDATA (signal));
  UNGCPRO;
  if (dmessage == NULL)
    XD_SIGNAL1 (build_string ("Unable to create a new message"));

  /* Initialize parameter list of message.  */
  dbus_message_iter_init_append (dmessage, &iter);

  /* Append parameters to the message.  */
  for (i = 5; i < nargs; ++i)
    {
      dtype = XD_OBJECT_TO_DBUS_TYPE (args[i]);
      if (XD_DBUS_TYPE_P (args[i]))
	{
	  XD_DEBUG_VALID_LISP_OBJECT_P (args[i]);
	  XD_DEBUG_VALID_LISP_OBJECT_P (args[i+1]);
	  XD_DEBUG_MESSAGE ("Parameter%d %s %s", i-4,
			    SDATA (format2 ("%s", args[i], Qnil)),
			    SDATA (format2 ("%s", args[i+1], Qnil)));
	  ++i;
	}
      else
	{
	  XD_DEBUG_VALID_LISP_OBJECT_P (args[i]);
	  XD_DEBUG_MESSAGE ("Parameter%d %s", i-4,
			    SDATA (format2 ("%s", args[i], Qnil)));
	}

      /* Check for valid signature.  We use DBUS_TYPE_INVALID as
	 indication that there is no parent type.  */
      xd_signature (signature, dtype, DBUS_TYPE_INVALID, args[i]);

      xd_append_arg (dtype, args[i], &iter);
    }

  /* Send the message.  The message is just added to the outgoing
     message queue.  */
  if (!dbus_connection_send (connection, dmessage, NULL))
    XD_SIGNAL1 (build_string ("Cannot send message"));

  /* Flush connection to ensure the message is handled.  */
  dbus_connection_flush (connection);

  XD_DEBUG_MESSAGE ("Signal sent");

  /* Cleanup.  */
  dbus_message_unref (dmessage);

  /* Return.  */
  return Qt;
}

/* Check, whether there is pending input in the message queue of the
   D-Bus BUS.  BUS is either a Lisp symbol, :system or :session, or a
   string denoting the bus address.  */
int
xd_get_dispatch_status (Lisp_Object bus)
{
  DBusConnection *connection;

  /* Open a connection to the bus.  */
  connection = xd_initialize (bus, FALSE);
  if (connection == NULL) return FALSE;

  /* Non blocking read of the next available message.  */
  dbus_connection_read_write (connection, 0);

  /* Return.  */
  return
    (dbus_connection_get_dispatch_status (connection)
     == DBUS_DISPATCH_DATA_REMAINS)
    ? TRUE : FALSE;
}

/* Check for queued incoming messages from the buses.  */
int
xd_pending_messages (void)
{
  Lisp_Object busp = Vdbus_registered_buses;

  while (!NILP (busp))
    {
      /* We do not want to have an autolaunch for the session bus.  */
      if (EQ ((CAR_SAFE (busp)), QCdbus_session_bus)
	  && getenv ("DBUS_SESSION_BUS_ADDRESS") == NULL)
	continue;

      if (xd_get_dispatch_status (CAR_SAFE (busp)))
	return TRUE;

      busp = CDR_SAFE (busp);
    }

  return FALSE;
}

/* Read queued incoming message of the D-Bus BUS.  BUS is either a
   Lisp symbol, :system or :session, or a string denoting the bus
   address.  */
static Lisp_Object
xd_read_message (Lisp_Object bus)
{
  Lisp_Object args, key, value;
  struct gcpro gcpro1;
  struct input_event event;
  DBusConnection *connection;
  DBusMessage *dmessage;
  DBusMessageIter iter;
  unsigned int dtype;
  int mtype, serial;
  const char *uname, *path, *interface, *member;

  /* Open a connection to the bus.  */
  connection = xd_initialize (bus, TRUE);

  /* Non blocking read of the next available message.  */
  dbus_connection_read_write (connection, 0);
  dmessage = dbus_connection_pop_message (connection);

  /* Return if there is no queued message.  */
  if (dmessage == NULL)
    return Qnil;

  /* Collect the parameters.  */
  args = Qnil;
  GCPRO1 (args);

  /* Loop over the resulting parameters.  Construct a list.  */
  if (dbus_message_iter_init (dmessage, &iter))
    {
      while ((dtype = dbus_message_iter_get_arg_type (&iter))
	     != DBUS_TYPE_INVALID)
	{
	  args = Fcons (xd_retrieve_arg (dtype, &iter), args);
	  dbus_message_iter_next (&iter);
	}
      /* The arguments are stored in reverse order.  Reorder them.  */
      args = Fnreverse (args);
    }

  /* Read message type, message serial, unique name, object path,
     interface and member from the message.  */
  mtype = dbus_message_get_type (dmessage);
  serial =
    ((mtype == DBUS_MESSAGE_TYPE_METHOD_RETURN)
     || (mtype == DBUS_MESSAGE_TYPE_ERROR))
    ? dbus_message_get_reply_serial (dmessage)
    : dbus_message_get_serial (dmessage);
  uname = dbus_message_get_sender (dmessage);
  path = dbus_message_get_path (dmessage);
  interface = dbus_message_get_interface (dmessage);
  member = dbus_message_get_member (dmessage);

  XD_DEBUG_MESSAGE ("Event received: %s %d %s %s %s %s %s",
		    (mtype == DBUS_MESSAGE_TYPE_INVALID)
		    ? "DBUS_MESSAGE_TYPE_INVALID"
		    : (mtype == DBUS_MESSAGE_TYPE_METHOD_CALL)
		    ? "DBUS_MESSAGE_TYPE_METHOD_CALL"
		    : (mtype == DBUS_MESSAGE_TYPE_METHOD_RETURN)
		    ? "DBUS_MESSAGE_TYPE_METHOD_RETURN"
		    : (mtype == DBUS_MESSAGE_TYPE_ERROR)
		    ? "DBUS_MESSAGE_TYPE_ERROR"
		    : "DBUS_MESSAGE_TYPE_SIGNAL",
		    serial, uname, path, interface, member,
		    SDATA (format2 ("%s", args, Qnil)));

  if ((mtype == DBUS_MESSAGE_TYPE_METHOD_RETURN)
      || (mtype == DBUS_MESSAGE_TYPE_ERROR))
    {
      /* Search for a registered function of the message.  */
      key = list2 (bus, make_number (serial));
      value = Fgethash (key, Vdbus_registered_objects_table, Qnil);

      /* There shall be exactly one entry.  Construct an event.  */
      if (NILP (value))
	goto cleanup;

      /* Remove the entry.  */
      Fremhash (key, Vdbus_registered_objects_table);

      /* Construct an event.  */
      EVENT_INIT (event);
      event.kind = DBUS_EVENT;
      event.frame_or_window = Qnil;
      event.arg = Fcons (value, args);
    }

  else /* (mtype != DBUS_MESSAGE_TYPE_METHOD_RETURN)  */
    {
      /* Vdbus_registered_objects_table requires non-nil interface and
	 member.  */
      if ((interface == NULL) || (member == NULL))
	goto cleanup;

      /* Search for a registered function of the message.  */
      key = list3 (bus, build_string (interface), build_string (member));
      value = Fgethash (key, Vdbus_registered_objects_table, Qnil);

      /* Loop over the registered functions.  Construct an event.  */
      while (!NILP (value))
	{
	  key = CAR_SAFE (value);
	  /* key has the structure (UNAME SERVICE PATH HANDLER).  */
	  if (((uname == NULL)
	       || (NILP (CAR_SAFE (key)))
	       || (strcmp (uname, SDATA (CAR_SAFE (key))) == 0))
	      && ((path == NULL)
		  || (NILP (CAR_SAFE (CDR_SAFE (CDR_SAFE (key)))))
		  || (strcmp (path,
			      SDATA (CAR_SAFE (CDR_SAFE (CDR_SAFE (key)))))
		      == 0))
	      && (!NILP (CAR_SAFE (CDR_SAFE (CDR_SAFE (CDR_SAFE (key)))))))
	    {
	      EVENT_INIT (event);
	      event.kind = DBUS_EVENT;
	      event.frame_or_window = Qnil;
	      event.arg = Fcons (CAR_SAFE (CDR_SAFE (CDR_SAFE (CDR_SAFE (key)))),
				 args);
	      break;
	    }
	  value = CDR_SAFE (value);
	}

      if (NILP (value))
	goto cleanup;
    }

  /* Add type, serial, uname, path, interface and member to the event.  */
  event.arg = Fcons ((member == NULL ? Qnil : build_string (member)),
		     event.arg);
  event.arg = Fcons ((interface == NULL ? Qnil : build_string (interface)),
		     event.arg);
  event.arg = Fcons ((path == NULL ? Qnil : build_string (path)),
		     event.arg);
  event.arg = Fcons ((uname == NULL ? Qnil : build_string (uname)),
		     event.arg);
  event.arg = Fcons (make_number (serial), event.arg);
  event.arg = Fcons (make_number (mtype), event.arg);

  /* Add the bus symbol to the event.  */
  event.arg = Fcons (bus, event.arg);

  /* Store it into the input event queue.  */
  kbd_buffer_store_event (&event);

  XD_DEBUG_MESSAGE ("Event stored: %s",
		    SDATA (format2 ("%s", event.arg, Qnil)));

  /* Cleanup.  */
 cleanup:
  dbus_message_unref (dmessage);

  RETURN_UNGCPRO (Qnil);
}

/* Read queued incoming messages from all buses.  */
void
xd_read_queued_messages (void)
{
  Lisp_Object busp = Vdbus_registered_buses;

  xd_in_read_queued_messages = 1;
  while (!NILP (busp))
    {
      /* We ignore all Lisp errors during the call.  */
      internal_catch (Qdbus_error, xd_read_message, CAR_SAFE (busp));
      busp = CDR_SAFE (busp);
    }
  xd_in_read_queued_messages = 0;
}

DEFUN ("dbus-register-signal", Fdbus_register_signal, Sdbus_register_signal,
       6, MANY, 0,
       doc: /* Register for signal SIGNAL on the D-Bus BUS.

BUS is either a Lisp symbol, `:system' or `:session', or a string
denoting the bus address.

SERVICE is the D-Bus service name used by the sending D-Bus object.
It can be either a known name or the unique name of the D-Bus object
sending the signal.  When SERVICE is nil, related signals from all
D-Bus objects shall be accepted.

PATH is the D-Bus object path SERVICE is registered.  It can also be
nil if the path name of incoming signals shall not be checked.

INTERFACE is an interface offered by SERVICE.  It must provide SIGNAL.
HANDLER is a Lisp function to be called when the signal is received.
It must accept as arguments the values SIGNAL is sending.

All other arguments ARGS, if specified, must be strings.  They stand
for the respective arguments of the signal in their order, and are
used for filtering as well.  A nil argument might be used to preserve
the order.

INTERFACE, SIGNAL and HANDLER must not be nil.  Example:

\(defun my-signal-handler (device)
  (message "Device %s added" device))

\(dbus-register-signal
  :system "org.freedesktop.Hal" "/org/freedesktop/Hal/Manager"
  "org.freedesktop.Hal.Manager" "DeviceAdded" 'my-signal-handler)

  => ((:system "org.freedesktop.Hal.Manager" "DeviceAdded")
      ("org.freedesktop.Hal" "/org/freedesktop/Hal/Manager" my-signal-handler))

`dbus-register-signal' returns an object, which can be used in
`dbus-unregister-object' for removing the registration.

usage: (dbus-register-signal BUS SERVICE PATH INTERFACE SIGNAL HANDLER &rest ARGS) */)
  (int nargs, register Lisp_Object *args)
{
  Lisp_Object bus, service, path, interface, signal, handler;
  struct gcpro gcpro1, gcpro2, gcpro3, gcpro4, gcpro5, gcpro6;
  Lisp_Object uname, key, key1, value;
  DBusConnection *connection;
  int i;
  char rule[DBUS_MAXIMUM_MATCH_RULE_LENGTH];
  char x[DBUS_MAXIMUM_MATCH_RULE_LENGTH];
  DBusError derror;

  /* Check parameters.  */
  bus = args[0];
  service = args[1];
  path = args[2];
  interface = args[3];
  signal = args[4];
  handler = args[5];

  if (!NILP (service)) CHECK_STRING (service);
  if (!NILP (path)) CHECK_STRING (path);
  CHECK_STRING (interface);
  CHECK_STRING (signal);
  if (!FUNCTIONP (handler))
    wrong_type_argument (intern ("functionp"), handler);
  GCPRO6 (bus, service, path, interface, signal, handler);

  /* Retrieve unique name of service.  If service is a known name, we
     will register for the corresponding unique name, if any.  Signals
     are sent always with the unique name as sender.  Note: the unique
     name of "org.freedesktop.DBus" is that string itself.  */
  if ((STRINGP (service))
      && (SBYTES (service) > 0)
      && (strcmp (SDATA (service), DBUS_SERVICE_DBUS) != 0)
      && (strncmp (SDATA (service), ":", 1) != 0))
    {
      uname = call2 (intern ("dbus-get-name-owner"), bus, service);
      /* When there is no unique name, we mark it with an empty
	 string.  */
      if (NILP (uname))
	uname = empty_unibyte_string;
    }
  else
    uname = service;

  /* Create a matching rule if the unique name exists (when no
     wildcard).  */
  if (NILP (uname) || (SBYTES (uname) > 0))
    {
      /* Open a connection to the bus.  */
      connection = xd_initialize (bus, TRUE);

      /* Create a rule to receive related signals.  */
      sprintf (rule,
	       "type='signal',interface='%s',member='%s'",
	       SDATA (interface),
	       SDATA (signal));

      /* Add unique name and path to the rule if they are non-nil.  */
      if (!NILP (uname))
	{
	  sprintf (x, ",sender='%s'", SDATA (uname));
	  strcat (rule, x);
	}

      if (!NILP (path))
	{
	  sprintf (x, ",path='%s'", SDATA (path));
	  strcat (rule, x);
	}

      /* Add arguments to the rule if they are non-nil.  */
      for (i = 6; i < nargs; ++i)
	if (!NILP (args[i]))
	  {
	    CHECK_STRING (args[i]);
	    sprintf (x, ",arg%d='%s'", i-6, SDATA (args[i]));
	    strcat (rule, x);
	  }

      /* Add the rule to the bus.  */
      dbus_error_init (&derror);
      dbus_bus_add_match (connection, rule, &derror);
      if (dbus_error_is_set (&derror))
	{
	  UNGCPRO;
	  XD_ERROR (derror);
	}

      /* Cleanup.  */
      dbus_error_free (&derror);

      XD_DEBUG_MESSAGE ("Matching rule \"%s\" created", rule);
    }

  /* Create a hash table entry.  */
  key = list3 (bus, interface, signal);
  key1 = list4 (uname, service, path, handler);
  value = Fgethash (key, Vdbus_registered_objects_table, Qnil);

  if (NILP (Fmember (key1, value)))
    Fputhash (key, Fcons (key1, value), Vdbus_registered_objects_table);

  /* Return object.  */
  RETURN_UNGCPRO (list2 (key, list3 (service, path, handler)));
}

DEFUN ("dbus-register-method", Fdbus_register_method, Sdbus_register_method,
       6, 6, 0,
       doc: /* Register for method METHOD on the D-Bus BUS.

BUS is either a Lisp symbol, `:system' or `:session', or a string
denoting the bus address.

SERVICE is the D-Bus service name of the D-Bus object METHOD is
registered for.  It must be a known name.

PATH is the D-Bus object path SERVICE is registered.  INTERFACE is the
interface offered by SERVICE.  It must provide METHOD.  HANDLER is a
Lisp function to be called when a method call is received.  It must
accept the input arguments of METHOD.  The return value of HANDLER is
used for composing the returning D-Bus message.  */)
  (Lisp_Object bus, Lisp_Object service, Lisp_Object path, Lisp_Object interface, Lisp_Object method, Lisp_Object handler)
{
  Lisp_Object key, key1, value;
  DBusConnection *connection;
  int result;
  DBusError derror;

  /* Check parameters.  */
  CHECK_STRING (service);
  CHECK_STRING (path);
  CHECK_STRING (interface);
  CHECK_STRING (method);
  if (!FUNCTIONP (handler))
    wrong_type_argument (intern ("functionp"), handler);
  /* TODO: We must check for a valid service name, otherwise there is
     a segmentation fault.  */

  /* Open a connection to the bus.  */
  connection = xd_initialize (bus, TRUE);

  /* Request the known name from the bus.  We can ignore the result,
     it is set to -1 if there is an error - kind of redundancy.  */
  dbus_error_init (&derror);
  result = dbus_bus_request_name (connection, SDATA (service), 0, &derror);
  if (dbus_error_is_set (&derror))
    XD_ERROR (derror);

  /* Create a hash table entry.  We use nil for the unique name,
     because the method might be called from anybody.  */
  key = list3 (bus, interface, method);
  key1 = list4 (Qnil, service, path, handler);
  value = Fgethash (key, Vdbus_registered_objects_table, Qnil);

  if (NILP (Fmember (key1, value)))
    Fputhash (key, Fcons (key1, value), Vdbus_registered_objects_table);

  /* Cleanup.  */
  dbus_error_free (&derror);

  /* Return object.  */
  return list2 (key, list3 (service, path, handler));
}


void
syms_of_dbusbind (void)
{

  Qdbus_init_bus = intern_c_string ("dbus-init-bus");
  staticpro (&Qdbus_init_bus);
  defsubr (&Sdbus_init_bus);

  Qdbus_close_bus = intern_c_string ("dbus-close-bus");
  staticpro (&Qdbus_close_bus);
  defsubr (&Sdbus_close_bus);

  Qdbus_get_unique_name = intern_c_string ("dbus-get-unique-name");
  staticpro (&Qdbus_get_unique_name);
  defsubr (&Sdbus_get_unique_name);

  Qdbus_call_method = intern_c_string ("dbus-call-method");
  staticpro (&Qdbus_call_method);
  defsubr (&Sdbus_call_method);

  Qdbus_call_method_asynchronously = intern_c_string ("dbus-call-method-asynchronously");
  staticpro (&Qdbus_call_method_asynchronously);
  defsubr (&Sdbus_call_method_asynchronously);

  Qdbus_method_return_internal = intern_c_string ("dbus-method-return-internal");
  staticpro (&Qdbus_method_return_internal);
  defsubr (&Sdbus_method_return_internal);

  Qdbus_method_error_internal = intern_c_string ("dbus-method-error-internal");
  staticpro (&Qdbus_method_error_internal);
  defsubr (&Sdbus_method_error_internal);

  Qdbus_send_signal = intern_c_string ("dbus-send-signal");
  staticpro (&Qdbus_send_signal);
  defsubr (&Sdbus_send_signal);

  Qdbus_register_signal = intern_c_string ("dbus-register-signal");
  staticpro (&Qdbus_register_signal);
  defsubr (&Sdbus_register_signal);

  Qdbus_register_method = intern_c_string ("dbus-register-method");
  staticpro (&Qdbus_register_method);
  defsubr (&Sdbus_register_method);

  Qdbus_error = intern_c_string ("dbus-error");
  staticpro (&Qdbus_error);
  Fput (Qdbus_error, Qerror_conditions,
	list2 (Qdbus_error, Qerror));
  Fput (Qdbus_error, Qerror_message,
	make_pure_c_string ("D-Bus error"));

  QCdbus_system_bus = intern_c_string (":system");
  staticpro (&QCdbus_system_bus);

  QCdbus_session_bus = intern_c_string (":session");
  staticpro (&QCdbus_session_bus);

  QCdbus_timeout = intern_c_string (":timeout");
  staticpro (&QCdbus_timeout);

  QCdbus_type_byte = intern_c_string (":byte");
  staticpro (&QCdbus_type_byte);

  QCdbus_type_boolean = intern_c_string (":boolean");
  staticpro (&QCdbus_type_boolean);

  QCdbus_type_int16 = intern_c_string (":int16");
  staticpro (&QCdbus_type_int16);

  QCdbus_type_uint16 = intern_c_string (":uint16");
  staticpro (&QCdbus_type_uint16);

  QCdbus_type_int32 = intern_c_string (":int32");
  staticpro (&QCdbus_type_int32);

  QCdbus_type_uint32 = intern_c_string (":uint32");
  staticpro (&QCdbus_type_uint32);

  QCdbus_type_int64 = intern_c_string (":int64");
  staticpro (&QCdbus_type_int64);

  QCdbus_type_uint64 = intern_c_string (":uint64");
  staticpro (&QCdbus_type_uint64);

  QCdbus_type_double = intern_c_string (":double");
  staticpro (&QCdbus_type_double);

  QCdbus_type_string = intern_c_string (":string");
  staticpro (&QCdbus_type_string);

  QCdbus_type_object_path = intern_c_string (":object-path");
  staticpro (&QCdbus_type_object_path);

  QCdbus_type_signature = intern_c_string (":signature");
  staticpro (&QCdbus_type_signature);

  QCdbus_type_array = intern_c_string (":array");
  staticpro (&QCdbus_type_array);

  QCdbus_type_variant = intern_c_string (":variant");
  staticpro (&QCdbus_type_variant);

  QCdbus_type_struct = intern_c_string (":struct");
  staticpro (&QCdbus_type_struct);

  QCdbus_type_dict_entry = intern_c_string (":dict-entry");
  staticpro (&QCdbus_type_dict_entry);

  DEFVAR_LISP ("dbus-registered-buses",
	       &Vdbus_registered_buses,
    doc: /* List of D-Bus buses we are polling for messages.  */);
  Vdbus_registered_buses = Qnil;

  DEFVAR_LISP ("dbus-registered-objects-table",
	       &Vdbus_registered_objects_table,
    doc: /* Hash table of registered functions for D-Bus.

There are two different uses of the hash table: for accessing
registered interfaces properties, targeted by signals or method calls,
and for calling handlers in case of non-blocking method call returns.

In the first case, the key in the hash table is the list (BUS
INTERFACE MEMBER).  BUS is either a Lisp symbol, `:system' or
`:session', or a string denoting the bus address.  INTERFACE is a
string which denotes a D-Bus interface, and MEMBER, also a string, is
either a method, a signal or a property INTERFACE is offering.  All
arguments but BUS must not be nil.

The value in the hash table is a list of quadruple lists
\((UNAME SERVICE PATH OBJECT) (UNAME SERVICE PATH OBJECT) ...).
SERVICE is the service name as registered, UNAME is the corresponding
unique name.  In case of registered methods and properties, UNAME is
nil.  PATH is the object path of the sending object.  All of them can
be nil, which means a wildcard then.  OBJECT is either the handler to
be called when a D-Bus message, which matches the key criteria,
arrives (methods and signals), or a cons cell containing the value of
the property.

In the second case, the key in the hash table is the list (BUS
SERIAL).  BUS is either a Lisp symbol, `:system' or `:session', or a
string denoting the bus address.  SERIAL is the serial number of the
non-blocking method call, a reply is expected.  Both arguments must
not be nil.  The value in the hash table is HANDLER, the function to
be called when the D-Bus reply message arrives.  */);
  {
    Lisp_Object args[2];
    args[0] = QCtest;
    args[1] = Qequal;
    Vdbus_registered_objects_table = Fmake_hash_table (2, args);
  }

  DEFVAR_LISP ("dbus-debug", &Vdbus_debug,
    doc: /* If non-nil, debug messages of D-Bus bindings are raised.  */);
#ifdef DBUS_DEBUG
  Vdbus_debug = Qt;
#else
  Vdbus_debug = Qnil;
#endif

  Fprovide (intern_c_string ("dbusbind"), Qnil);

}

#endif /* HAVE_DBUS */

/* arch-tag: 0e828477-b571-4fe4-b559-5c9211bc14b8
   (do not change this comment) */