annotate install-sh @ 51207:7e176ef34c10

Make (many) trivial substitutions for renamed and new macros in dispextern.h, frame.h and window.h. (make_window): Initialize new members left_margin_cols, right_margin_cols, left_fringe_width, right_fringe_width, fringes_outside_margins, scroll_bar_width, and vertical_scroll_bar_type. (coordinates_in_window): Adapted to new fringe/margin positions and per-window fringes and scroll-bars. Fix bug related to incorrectly adjusting coordinates by frame's internal_border_width (the effect normally negible since the internal_border_width is typically 0 or 1 pixel, but very noticeable for an internal_border_width of e.g. 25 pixels). Upon successful return (other than ON_NOTHING), the coordinates are now always properly converted to window relative for the given display element. (window_from_coordinates): Add new parameters wx and wy to return the window relative x and y position in the returned window and part. A null arg means, don't return the position. All callers changed. (adjust_window_margins): New function which may reduce the width of the display margins if a window's text area is too small after resizing or splitting windows. (size_window): Fix bug that did not account for display margin widths when checking the minimum width of a window; use adjust_window_margins. (set_window_buffer): Call Fset_window_fringes and Fset_window_scroll_bars to setup per-window elements. Add new arg KEEP_MARGINS_P. Non-nil means to keep window's existing display margin, fringe widths, and scroll bar settings (e.g. after splitting a window or resizing the frame). All callers changed. (Fset_window_buffer): New arg KEEP_MARGINS. All callers changed. (Fsplit_window): Duplicate original window's display margin, fringe, and scroll-bar settings; then call Fset_window_buffer with KEEP_MARGINS non-nil. This fixes a bug which caused a split window to only preserve the display margins in one of the windows. When splitting horisontally, call adjust_window_margins on both windows to ensure that the text area of the new windows is non too narrow. This fixes a bug which could cause emacs to trap if the width of the split window was less than the width of the display margins. (window_box_text_cols): Renamed from window_internal_width. All uses changed. Adapt to per-window fringes and scroll bars. Fix bug that caused vertical separator to be subtracted also on window frames. Fix another bug that did not reduce the returned value by the columns used for display margins. (window_scroll_line_based): Fix bug related to scrolling too much when display margins are present (implicitly fixed by the fix to window_box_text_cols). (scroll_left, scroll_right): Fix bug related to scrolling too far by default when display margins are present (implicitly fixed by the fix to window_box_text_cols). (struct saved_window): Rename members left to left_col, top to top_line, width to total_cols, height to total_lines, orig_top to orig_top_line, orig_height to orig_total_lines. All uses changed. New members left_margin_cols, right_margin_cols, left_fringe_width, right_fringe_width, fringes_outside_margins, scroll_bar_width, and vertical_scroll_bar_type for saving per-window display elements. (Fset_window_configuration): Restore display margins, fringes, and scroll bar settings. This fixes a bug which caused display margins to be discarded when saving and restoring a window configuration. (save_window_save): Save display margins, fringes, and scroll bar settings. This fixes a bug which caused display margins to be discarded when saving and restoring a window configuration. (Fset_window_margins): Do nothing if display margins are not really changed. Otherwise, call adjust_window_margins to ensure the text area doesn't get too narrow. This fixes a bug which could cause emacs to trap if setting display margins wider than the width of the window. (Fset_window_fringes): New defun to allow user to specifically set this window's fringe widths and position vs. display margins. (Fwindow_fringes): New defun to return window's actual fringe settings. (Fset_window_scroll_bars): New defun to allow user to specifically set this window's scroll bar width and position. (Fwindow_scroll_bars): New defun to return window's actual scroll bar settings. (compare_window_configurations): Also compare display margins, fringes, and scroll bar settings. (syms_of_window): Defsubr new defuns for fringe and scroll bars.

#! /bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission.  M.I.T. makes no representations about the
# suitability of this software for any purpose.  It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.  It can only install one file at a time, a restriction
# shared with many OS's install programs.


# set DOITPROG to echo to test this script

# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"


# put in absolute paths if you don't have them in your path; or use env. vars.

mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"

transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""

while [ x"$1" != x ]; do
    case $1 in
	-c) instcmd="$cpprog"
	    shift
	    continue;;

	-d) dir_arg=true
	    shift
	    continue;;

	-m) chmodcmd="$chmodprog $2"
	    shift
	    shift
	    continue;;

	-o) chowncmd="$chownprog $2"
	    shift
	    shift
	    continue;;

	-g) chgrpcmd="$chgrpprog $2"
	    shift
	    shift
	    continue;;

	-s) stripcmd="$stripprog"
	    shift
	    continue;;

	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
	    shift
	    continue;;

	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
	    shift
	    continue;;

	*)  if [ x"$src" = x ]
	    then
		src=$1
	    else
		# this colon is to work around a 386BSD /bin/sh bug
		:
		dst=$1
	    fi
	    shift
	    continue;;
    esac
done

if [ x"$src" = x ]
then
	echo "install:	no input file specified"
	exit 1
else
	true
fi

if [ x"$dir_arg" != x ]; then
	dst=$src
	src=""

	if [ -d $dst ]; then
		instcmd=:
	else
		instcmd=mkdir
	fi
else

# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.

	if [ -f $src -o -d $src ]
	then
		true
	else
		echo "install:  $src does not exist"
		exit 1
	fi

	if [ x"$dst" = x ]
	then
		echo "install:	no destination specified"
		exit 1
	else
		true
	fi

# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic

	if [ -d $dst ]
	then
		dst="$dst"/`basename $src`
	else
		true
	fi
fi

## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`

# Make sure that the destination directory exists.
#  this part is taken from Noah Friedman's mkinstalldirs script

# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-${defaultIFS}}"

oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"

pathcomp=''

while [ $# -ne 0 ] ; do
	pathcomp="${pathcomp}${1}"
	shift

	if [ ! -d "${pathcomp}" ] ;
        then
		$mkdirprog "${pathcomp}"
	else
		true
	fi

	pathcomp="${pathcomp}/"
done
fi

if [ x"$dir_arg" != x ]
then
	$doit $instcmd $dst &&

	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else

# If we're going to rename the final executable, determine the name now.

	if [ x"$transformarg" = x ]
	then
		dstfile=`basename $dst`
	else
		dstfile=`basename $dst $transformbasename |
			sed $transformarg`$transformbasename
	fi

# don't allow the sed command to completely eliminate the filename

	if [ x"$dstfile" = x ]
	then
		dstfile=`basename $dst`
	else
		true
	fi

# Make a temp file name in the proper directory.

	dsttmp=$dstdir/#inst.$$#

# Move or copy the file name to the temp name

	$doit $instcmd $src $dsttmp &&

	trap "rm -f ${dsttmp}" 0 &&

# and set any options; do chmod last to preserve setuid bits

# If any of these fail, we abort the whole thing.  If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.

	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&

# Now rename the file to the real destination.

	$doit $rmcmd -f $dstdir/$dstfile &&
	$doit $mvcmd $dsttmp $dstdir/$dstfile

fi &&


exit 0