Mercurial > emacs
annotate src/search.c @ 1537:8531c6d96e5c
(make-directory): Renamed from make-directory-path.
Optional argument says whether to create parent dirs.
Invoke file-name handler here.
(after-find-file): Delete code that offers to create dir.
Instead, just print a message.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Tue, 03 Nov 1992 07:07:02 +0000 |
parents | bd61aaa7828b |
children | f4d848dea8ff |
rev | line source |
---|---|
603 | 1 /* String search routines for GNU Emacs. |
2 Copyright (C) 1985, 1986, 1987, 1992 Free Software Foundation, Inc. | |
3 | |
4 This file is part of GNU Emacs. | |
5 | |
6 GNU Emacs is free software; you can redistribute it and/or modify | |
7 it under the terms of the GNU General Public License as published by | |
8 the Free Software Foundation; either version 1, or (at your option) | |
9 any later version. | |
10 | |
11 GNU Emacs is distributed in the hope that it will be useful, | |
12 but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 GNU General Public License for more details. | |
15 | |
16 You should have received a copy of the GNU General Public License | |
17 along with GNU Emacs; see the file COPYING. If not, write to | |
18 the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ | |
19 | |
20 | |
21 #include "config.h" | |
22 #include "lisp.h" | |
23 #include "syntax.h" | |
24 #include "buffer.h" | |
25 #include "commands.h" | |
621 | 26 |
603 | 27 #include <sys/types.h> |
28 #include "regex.h" | |
29 | |
30 #define max(a, b) ((a) > (b) ? (a) : (b)) | |
31 #define min(a, b) ((a) < (b) ? (a) : (b)) | |
32 | |
33 /* We compile regexps into this buffer and then use it for searching. */ | |
34 | |
35 struct re_pattern_buffer searchbuf; | |
36 | |
37 char search_fastmap[0400]; | |
38 | |
39 /* Last regexp we compiled */ | |
40 | |
41 Lisp_Object last_regexp; | |
42 | |
621 | 43 /* Every call to re_match, etc., must pass &search_regs as the regs |
44 argument unless you can show it is unnecessary (i.e., if re_match | |
45 is certainly going to be called again before region-around-match | |
46 can be called). | |
47 | |
48 Since the registers are now dynamically allocated, we need to make | |
49 sure not to refer to the Nth register before checking that it has | |
708 | 50 been allocated by checking search_regs.num_regs. |
603 | 51 |
708 | 52 The regex code keeps track of whether it has allocated the search |
53 buffer using bits in searchbuf. This means that whenever you | |
54 compile a new pattern, it completely forgets whether it has | |
55 allocated any registers, and will allocate new registers the next | |
56 time you call a searching or matching function. Therefore, we need | |
57 to call re_set_registers after compiling a new pattern or after | |
58 setting the match registers, so that the regex functions will be | |
59 able to free or re-allocate it properly. */ | |
603 | 60 static struct re_registers search_regs; |
61 | |
727 | 62 /* The buffer in which the last search was performed, or |
63 Qt if the last search was done in a string; | |
64 Qnil if no searching has been done yet. */ | |
65 static Lisp_Object last_thing_searched; | |
603 | 66 |
67 /* error condition signalled when regexp compile_pattern fails */ | |
68 | |
69 Lisp_Object Qinvalid_regexp; | |
70 | |
71 static void | |
72 matcher_overflow () | |
73 { | |
74 error ("Stack overflow in regexp matcher"); | |
75 } | |
76 | |
77 #ifdef __STDC__ | |
78 #define CONST const | |
79 #else | |
80 #define CONST | |
81 #endif | |
82 | |
83 /* Compile a regexp and signal a Lisp error if anything goes wrong. */ | |
84 | |
708 | 85 compile_pattern (pattern, bufp, regp, translate) |
603 | 86 Lisp_Object pattern; |
87 struct re_pattern_buffer *bufp; | |
708 | 88 struct re_registers *regp; |
603 | 89 char *translate; |
90 { | |
91 CONST char *val; | |
92 Lisp_Object dummy; | |
93 | |
94 if (EQ (pattern, last_regexp) | |
95 && translate == bufp->translate) | |
96 return; | |
708 | 97 |
603 | 98 last_regexp = Qnil; |
99 bufp->translate = translate; | |
100 val = re_compile_pattern ((char *) XSTRING (pattern)->data, | |
101 XSTRING (pattern)->size, | |
102 bufp); | |
103 if (val) | |
104 { | |
105 dummy = build_string (val); | |
106 while (1) | |
107 Fsignal (Qinvalid_regexp, Fcons (dummy, Qnil)); | |
108 } | |
708 | 109 |
603 | 110 last_regexp = pattern; |
708 | 111 |
112 /* Advise the searching functions about the space we have allocated | |
113 for register data. */ | |
808 | 114 if (regp) |
115 re_set_registers (bufp, regp, regp->num_regs, regp->start, regp->end); | |
708 | 116 |
603 | 117 return; |
118 } | |
119 | |
120 /* Error condition used for failing searches */ | |
121 Lisp_Object Qsearch_failed; | |
122 | |
123 Lisp_Object | |
124 signal_failure (arg) | |
125 Lisp_Object arg; | |
126 { | |
127 Fsignal (Qsearch_failed, Fcons (arg, Qnil)); | |
128 return Qnil; | |
129 } | |
130 | |
131 DEFUN ("looking-at", Flooking_at, Slooking_at, 1, 1, 0, | |
638 | 132 "Return t if text after point matches regular expression PAT.\n\ |
133 This function modifies the match data that `match-beginning',\n\ | |
134 `match-end' and `match-data' access; save and restore the match\n\ | |
635
197f38dd0105
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
621
diff
changeset
|
135 data if you want to preserve them.") |
603 | 136 (string) |
137 Lisp_Object string; | |
138 { | |
139 Lisp_Object val; | |
140 unsigned char *p1, *p2; | |
141 int s1, s2; | |
142 register int i; | |
143 | |
144 CHECK_STRING (string, 0); | |
708 | 145 compile_pattern (string, &searchbuf, &search_regs, |
603 | 146 !NILP (current_buffer->case_fold_search) ? DOWNCASE_TABLE : 0); |
147 | |
148 immediate_quit = 1; | |
149 QUIT; /* Do a pending quit right away, to avoid paradoxical behavior */ | |
150 | |
151 /* Get pointers and sizes of the two strings | |
152 that make up the visible portion of the buffer. */ | |
153 | |
154 p1 = BEGV_ADDR; | |
155 s1 = GPT - BEGV; | |
156 p2 = GAP_END_ADDR; | |
157 s2 = ZV - GPT; | |
158 if (s1 < 0) | |
159 { | |
160 p2 = p1; | |
161 s2 = ZV - BEGV; | |
162 s1 = 0; | |
163 } | |
164 if (s2 < 0) | |
165 { | |
166 s1 = ZV - BEGV; | |
167 s2 = 0; | |
168 } | |
169 | |
170 i = re_match_2 (&searchbuf, (char *) p1, s1, (char *) p2, s2, | |
171 point - BEGV, &search_regs, | |
172 ZV - BEGV); | |
173 if (i == -2) | |
174 matcher_overflow (); | |
175 | |
176 val = (0 <= i ? Qt : Qnil); | |
621 | 177 for (i = 0; i < search_regs.num_regs; i++) |
603 | 178 if (search_regs.start[i] >= 0) |
179 { | |
180 search_regs.start[i] += BEGV; | |
181 search_regs.end[i] += BEGV; | |
182 } | |
727 | 183 XSET (last_thing_searched, Lisp_Buffer, current_buffer); |
603 | 184 immediate_quit = 0; |
185 return val; | |
186 } | |
187 | |
188 DEFUN ("string-match", Fstring_match, Sstring_match, 2, 3, 0, | |
189 "Return index of start of first match for REGEXP in STRING, or nil.\n\ | |
190 If third arg START is non-nil, start search at that index in STRING.\n\ | |
191 For index of first char beyond the match, do (match-end 0).\n\ | |
192 `match-end' and `match-beginning' also give indices of substrings\n\ | |
193 matched by parenthesis constructs in the pattern.") | |
194 (regexp, string, start) | |
195 Lisp_Object regexp, string, start; | |
196 { | |
197 int val; | |
198 int s; | |
199 | |
200 CHECK_STRING (regexp, 0); | |
201 CHECK_STRING (string, 1); | |
202 | |
203 if (NILP (start)) | |
204 s = 0; | |
205 else | |
206 { | |
207 int len = XSTRING (string)->size; | |
208 | |
209 CHECK_NUMBER (start, 2); | |
210 s = XINT (start); | |
211 if (s < 0 && -s <= len) | |
212 s = len - s; | |
213 else if (0 > s || s > len) | |
214 args_out_of_range (string, start); | |
215 } | |
216 | |
708 | 217 compile_pattern (regexp, &searchbuf, &search_regs, |
603 | 218 !NILP (current_buffer->case_fold_search) ? DOWNCASE_TABLE : 0); |
219 immediate_quit = 1; | |
220 val = re_search (&searchbuf, (char *) XSTRING (string)->data, | |
221 XSTRING (string)->size, s, XSTRING (string)->size - s, | |
222 &search_regs); | |
223 immediate_quit = 0; | |
727 | 224 last_thing_searched = Qt; |
603 | 225 if (val == -2) |
226 matcher_overflow (); | |
227 if (val < 0) return Qnil; | |
228 return make_number (val); | |
229 } | |
842 | 230 |
231 /* Match REGEXP against STRING, searching all of STRING, | |
232 and return the index of the match, or negative on failure. | |
233 This does not clobber the match data. */ | |
234 | |
235 int | |
236 fast_string_match (regexp, string) | |
237 Lisp_Object regexp, string; | |
238 { | |
239 int val; | |
240 | |
241 compile_pattern (regexp, &searchbuf, 0, 0); | |
242 immediate_quit = 1; | |
243 val = re_search (&searchbuf, (char *) XSTRING (string)->data, | |
244 XSTRING (string)->size, 0, XSTRING (string)->size, | |
245 0); | |
246 immediate_quit = 0; | |
247 return val; | |
248 } | |
603 | 249 |
648 | 250 /* Search for COUNT instances of the character TARGET, starting at START. |
251 If COUNT is negative, search backwards. | |
252 | |
253 If we find COUNT instances, set *SHORTAGE to zero, and return the | |
1413 | 254 position after the COUNTth match. Note that for reverse motion |
255 this is not the same as the usual convention for Emacs motion commands. | |
648 | 256 |
257 If we don't find COUNT instances before reaching the end of the | |
258 buffer (or the beginning, if scanning backwards), set *SHORTAGE to | |
259 the number of TARGETs left unfound, and return the end of the | |
260 buffer we bumped up against. */ | |
261 | |
262 scan_buffer (target, start, count, shortage) | |
263 int *shortage, start; | |
264 register int count, target; | |
603 | 265 { |
648 | 266 int limit = ((count > 0) ? ZV - 1 : BEGV); |
267 int direction = ((count > 0) ? 1 : -1); | |
268 | |
269 register unsigned char *cursor; | |
603 | 270 unsigned char *base; |
648 | 271 |
272 register int ceiling; | |
273 register unsigned char *ceiling_addr; | |
603 | 274 |
275 if (shortage != 0) | |
276 *shortage = 0; | |
277 | |
278 immediate_quit = 1; | |
279 | |
648 | 280 if (count > 0) |
281 while (start != limit + 1) | |
603 | 282 { |
648 | 283 ceiling = BUFFER_CEILING_OF (start); |
284 ceiling = min (limit, ceiling); | |
285 ceiling_addr = &FETCH_CHAR (ceiling) + 1; | |
286 base = (cursor = &FETCH_CHAR (start)); | |
603 | 287 while (1) |
288 { | |
648 | 289 while (*cursor != target && ++cursor != ceiling_addr) |
603 | 290 ; |
648 | 291 if (cursor != ceiling_addr) |
603 | 292 { |
648 | 293 if (--count == 0) |
603 | 294 { |
295 immediate_quit = 0; | |
648 | 296 return (start + cursor - base + 1); |
603 | 297 } |
298 else | |
648 | 299 if (++cursor == ceiling_addr) |
603 | 300 break; |
301 } | |
302 else | |
303 break; | |
304 } | |
648 | 305 start += cursor - base; |
603 | 306 } |
307 else | |
308 { | |
648 | 309 start--; /* first character we scan */ |
310 while (start > limit - 1) | |
311 { /* we WILL scan under start */ | |
312 ceiling = BUFFER_FLOOR_OF (start); | |
313 ceiling = max (limit, ceiling); | |
314 ceiling_addr = &FETCH_CHAR (ceiling) - 1; | |
315 base = (cursor = &FETCH_CHAR (start)); | |
603 | 316 cursor++; |
317 while (1) | |
318 { | |
648 | 319 while (--cursor != ceiling_addr && *cursor != target) |
603 | 320 ; |
648 | 321 if (cursor != ceiling_addr) |
603 | 322 { |
648 | 323 if (++count == 0) |
603 | 324 { |
325 immediate_quit = 0; | |
648 | 326 return (start + cursor - base + 1); |
603 | 327 } |
328 } | |
329 else | |
330 break; | |
331 } | |
648 | 332 start += cursor - base; |
603 | 333 } |
334 } | |
335 immediate_quit = 0; | |
336 if (shortage != 0) | |
648 | 337 *shortage = count * direction; |
338 return (start + ((direction == 1 ? 0 : 1))); | |
603 | 339 } |
340 | |
341 int | |
342 find_next_newline (from, cnt) | |
343 register int from, cnt; | |
344 { | |
345 return (scan_buffer ('\n', from, cnt, (int *) 0)); | |
346 } | |
347 | |
348 DEFUN ("skip-chars-forward", Fskip_chars_forward, Sskip_chars_forward, 1, 2, 0, | |
349 "Move point forward, stopping before a char not in CHARS, or at position LIM.\n\ | |
350 CHARS is like the inside of a `[...]' in a regular expression\n\ | |
351 except that `]' is never special and `\\' quotes `^', `-' or `\\'.\n\ | |
352 Thus, with arg \"a-zA-Z\", this skips letters stopping before first nonletter.\n\ | |
353 With arg \"^a-zA-Z\", skips nonletters stopping before first letter.") | |
354 (string, lim) | |
355 Lisp_Object string, lim; | |
356 { | |
357 skip_chars (1, string, lim); | |
358 return Qnil; | |
359 } | |
360 | |
361 DEFUN ("skip-chars-backward", Fskip_chars_backward, Sskip_chars_backward, 1, 2, 0, | |
362 "Move point backward, stopping after a char not in CHARS, or at position LIM.\n\ | |
363 See `skip-chars-forward' for details.") | |
364 (string, lim) | |
365 Lisp_Object string, lim; | |
366 { | |
367 skip_chars (0, string, lim); | |
368 return Qnil; | |
369 } | |
370 | |
371 skip_chars (forwardp, string, lim) | |
372 int forwardp; | |
373 Lisp_Object string, lim; | |
374 { | |
375 register unsigned char *p, *pend; | |
376 register unsigned char c; | |
377 unsigned char fastmap[0400]; | |
378 int negate = 0; | |
379 register int i; | |
380 | |
381 CHECK_STRING (string, 0); | |
382 | |
383 if (NILP (lim)) | |
384 XSET (lim, Lisp_Int, forwardp ? ZV : BEGV); | |
385 else | |
386 CHECK_NUMBER_COERCE_MARKER (lim, 1); | |
387 | |
388 #if 0 /* This breaks some things... jla. */ | |
389 /* In any case, don't allow scan outside bounds of buffer. */ | |
390 if (XFASTINT (lim) > ZV) | |
391 XFASTINT (lim) = ZV; | |
392 if (XFASTINT (lim) < BEGV) | |
393 XFASTINT (lim) = BEGV; | |
394 #endif | |
395 | |
396 p = XSTRING (string)->data; | |
397 pend = p + XSTRING (string)->size; | |
398 bzero (fastmap, sizeof fastmap); | |
399 | |
400 if (p != pend && *p == '^') | |
401 { | |
402 negate = 1; p++; | |
403 } | |
404 | |
405 /* Find the characters specified and set their elements of fastmap. */ | |
406 | |
407 while (p != pend) | |
408 { | |
409 c = *p++; | |
410 if (c == '\\') | |
411 { | |
412 if (p == pend) break; | |
413 c = *p++; | |
414 } | |
415 if (p != pend && *p == '-') | |
416 { | |
417 p++; | |
418 if (p == pend) break; | |
419 while (c <= *p) | |
420 { | |
421 fastmap[c] = 1; | |
422 c++; | |
423 } | |
424 p++; | |
425 } | |
426 else | |
427 fastmap[c] = 1; | |
428 } | |
429 | |
430 /* If ^ was the first character, complement the fastmap. */ | |
431 | |
432 if (negate) | |
433 for (i = 0; i < sizeof fastmap; i++) | |
434 fastmap[i] ^= 1; | |
435 | |
436 immediate_quit = 1; | |
437 if (forwardp) | |
438 { | |
439 while (point < XINT (lim) && fastmap[FETCH_CHAR (point)]) | |
440 SET_PT (point + 1); | |
441 } | |
442 else | |
443 { | |
444 while (point > XINT (lim) && fastmap[FETCH_CHAR (point - 1)]) | |
445 SET_PT (point - 1); | |
446 } | |
447 immediate_quit = 0; | |
448 } | |
449 | |
450 /* Subroutines of Lisp buffer search functions. */ | |
451 | |
452 static Lisp_Object | |
453 search_command (string, bound, noerror, count, direction, RE) | |
454 Lisp_Object string, bound, noerror, count; | |
455 int direction; | |
456 int RE; | |
457 { | |
458 register int np; | |
459 int lim; | |
460 int n = direction; | |
461 | |
462 if (!NILP (count)) | |
463 { | |
464 CHECK_NUMBER (count, 3); | |
465 n *= XINT (count); | |
466 } | |
467 | |
468 CHECK_STRING (string, 0); | |
469 if (NILP (bound)) | |
470 lim = n > 0 ? ZV : BEGV; | |
471 else | |
472 { | |
473 CHECK_NUMBER_COERCE_MARKER (bound, 1); | |
474 lim = XINT (bound); | |
475 if (n > 0 ? lim < point : lim > point) | |
476 error ("Invalid search bound (wrong side of point)"); | |
477 if (lim > ZV) | |
478 lim = ZV; | |
479 if (lim < BEGV) | |
480 lim = BEGV; | |
481 } | |
482 | |
483 np = search_buffer (string, point, lim, n, RE, | |
484 (!NILP (current_buffer->case_fold_search) | |
485 ? XSTRING (current_buffer->case_canon_table)->data : 0), | |
486 (!NILP (current_buffer->case_fold_search) | |
487 ? XSTRING (current_buffer->case_eqv_table)->data : 0)); | |
488 if (np <= 0) | |
489 { | |
490 if (NILP (noerror)) | |
491 return signal_failure (string); | |
492 if (!EQ (noerror, Qt)) | |
493 { | |
494 if (lim < BEGV || lim > ZV) | |
495 abort (); | |
496 SET_PT (lim); | |
497 } | |
498 return Qnil; | |
499 } | |
500 | |
501 if (np < BEGV || np > ZV) | |
502 abort (); | |
503 | |
504 SET_PT (np); | |
505 | |
506 return make_number (np); | |
507 } | |
508 | |
509 /* search for the n'th occurrence of STRING in the current buffer, | |
510 starting at position POS and stopping at position LIM, | |
511 treating PAT as a literal string if RE is false or as | |
512 a regular expression if RE is true. | |
513 | |
514 If N is positive, searching is forward and LIM must be greater than POS. | |
515 If N is negative, searching is backward and LIM must be less than POS. | |
516 | |
517 Returns -x if only N-x occurrences found (x > 0), | |
518 or else the position at the beginning of the Nth occurrence | |
519 (if searching backward) or the end (if searching forward). */ | |
520 | |
521 search_buffer (string, pos, lim, n, RE, trt, inverse_trt) | |
522 Lisp_Object string; | |
523 int pos; | |
524 int lim; | |
525 int n; | |
526 int RE; | |
527 register unsigned char *trt; | |
528 register unsigned char *inverse_trt; | |
529 { | |
530 int len = XSTRING (string)->size; | |
531 unsigned char *base_pat = XSTRING (string)->data; | |
532 register int *BM_tab; | |
533 int *BM_tab_base; | |
534 register int direction = ((n > 0) ? 1 : -1); | |
535 register int dirlen; | |
536 int infinity, limit, k, stride_for_teases; | |
537 register unsigned char *pat, *cursor, *p_limit; | |
538 register int i, j; | |
539 unsigned char *p1, *p2; | |
540 int s1, s2; | |
541 | |
542 /* Null string is found at starting position. */ | |
543 if (!len) | |
544 return pos; | |
545 | |
546 if (RE) | |
708 | 547 compile_pattern (string, &searchbuf, &search_regs, (char *) trt); |
603 | 548 |
549 if (RE /* Here we detect whether the */ | |
550 /* generality of an RE search is */ | |
551 /* really needed. */ | |
552 /* first item is "exact match" */ | |
621 | 553 && *(searchbuf.buffer) == (char) RE_EXACTN_VALUE |
603 | 554 && searchbuf.buffer[1] + 2 == searchbuf.used) /*first is ONLY item */ |
555 { | |
556 RE = 0; /* can do straight (non RE) search */ | |
557 pat = (base_pat = (unsigned char *) searchbuf.buffer + 2); | |
558 /* trt already applied */ | |
559 len = searchbuf.used - 2; | |
560 } | |
561 else if (!RE) | |
562 { | |
563 pat = (unsigned char *) alloca (len); | |
564 | |
565 for (i = len; i--;) /* Copy the pattern; apply trt */ | |
566 *pat++ = (((int) trt) ? trt [*base_pat++] : *base_pat++); | |
567 pat -= len; base_pat = pat; | |
568 } | |
569 | |
570 if (RE) | |
571 { | |
572 immediate_quit = 1; /* Quit immediately if user types ^G, | |
573 because letting this function finish | |
574 can take too long. */ | |
575 QUIT; /* Do a pending quit right away, | |
576 to avoid paradoxical behavior */ | |
577 /* Get pointers and sizes of the two strings | |
578 that make up the visible portion of the buffer. */ | |
579 | |
580 p1 = BEGV_ADDR; | |
581 s1 = GPT - BEGV; | |
582 p2 = GAP_END_ADDR; | |
583 s2 = ZV - GPT; | |
584 if (s1 < 0) | |
585 { | |
586 p2 = p1; | |
587 s2 = ZV - BEGV; | |
588 s1 = 0; | |
589 } | |
590 if (s2 < 0) | |
591 { | |
592 s1 = ZV - BEGV; | |
593 s2 = 0; | |
594 } | |
595 while (n < 0) | |
596 { | |
597 int val = re_search_2 (&searchbuf, (char *) p1, s1, (char *) p2, s2, | |
598 pos - BEGV, lim - pos, &search_regs, | |
599 /* Don't allow match past current point */ | |
600 pos - BEGV); | |
601 if (val == -2) | |
602 matcher_overflow (); | |
603 if (val >= 0) | |
604 { | |
605 j = BEGV; | |
621 | 606 for (i = 0; i < search_regs.num_regs; i++) |
603 | 607 if (search_regs.start[i] >= 0) |
608 { | |
609 search_regs.start[i] += j; | |
610 search_regs.end[i] += j; | |
611 } | |
727 | 612 XSET (last_thing_searched, Lisp_Buffer, current_buffer); |
603 | 613 /* Set pos to the new position. */ |
614 pos = search_regs.start[0]; | |
615 } | |
616 else | |
617 { | |
618 immediate_quit = 0; | |
619 return (n); | |
620 } | |
621 n++; | |
622 } | |
623 while (n > 0) | |
624 { | |
625 int val = re_search_2 (&searchbuf, (char *) p1, s1, (char *) p2, s2, | |
626 pos - BEGV, lim - pos, &search_regs, | |
627 lim - BEGV); | |
628 if (val == -2) | |
629 matcher_overflow (); | |
630 if (val >= 0) | |
631 { | |
632 j = BEGV; | |
621 | 633 for (i = 0; i < search_regs.num_regs; i++) |
603 | 634 if (search_regs.start[i] >= 0) |
635 { | |
636 search_regs.start[i] += j; | |
637 search_regs.end[i] += j; | |
638 } | |
727 | 639 XSET (last_thing_searched, Lisp_Buffer, current_buffer); |
603 | 640 pos = search_regs.end[0]; |
641 } | |
642 else | |
643 { | |
644 immediate_quit = 0; | |
645 return (0 - n); | |
646 } | |
647 n--; | |
648 } | |
649 immediate_quit = 0; | |
650 return (pos); | |
651 } | |
652 else /* non-RE case */ | |
653 { | |
654 #ifdef C_ALLOCA | |
655 int BM_tab_space[0400]; | |
656 BM_tab = &BM_tab_space[0]; | |
657 #else | |
658 BM_tab = (int *) alloca (0400 * sizeof (int)); | |
659 #endif | |
660 /* The general approach is that we are going to maintain that we know */ | |
661 /* the first (closest to the present position, in whatever direction */ | |
662 /* we're searching) character that could possibly be the last */ | |
663 /* (furthest from present position) character of a valid match. We */ | |
664 /* advance the state of our knowledge by looking at that character */ | |
665 /* and seeing whether it indeed matches the last character of the */ | |
666 /* pattern. If it does, we take a closer look. If it does not, we */ | |
667 /* move our pointer (to putative last characters) as far as is */ | |
668 /* logically possible. This amount of movement, which I call a */ | |
669 /* stride, will be the length of the pattern if the actual character */ | |
670 /* appears nowhere in the pattern, otherwise it will be the distance */ | |
671 /* from the last occurrence of that character to the end of the */ | |
672 /* pattern. */ | |
673 /* As a coding trick, an enormous stride is coded into the table for */ | |
674 /* characters that match the last character. This allows use of only */ | |
675 /* a single test, a test for having gone past the end of the */ | |
676 /* permissible match region, to test for both possible matches (when */ | |
677 /* the stride goes past the end immediately) and failure to */ | |
678 /* match (where you get nudged past the end one stride at a time). */ | |
679 | |
680 /* Here we make a "mickey mouse" BM table. The stride of the search */ | |
681 /* is determined only by the last character of the putative match. */ | |
682 /* If that character does not match, we will stride the proper */ | |
683 /* distance to propose a match that superimposes it on the last */ | |
684 /* instance of a character that matches it (per trt), or misses */ | |
685 /* it entirely if there is none. */ | |
686 | |
687 dirlen = len * direction; | |
688 infinity = dirlen - (lim + pos + len + len) * direction; | |
689 if (direction < 0) | |
690 pat = (base_pat += len - 1); | |
691 BM_tab_base = BM_tab; | |
692 BM_tab += 0400; | |
693 j = dirlen; /* to get it in a register */ | |
694 /* A character that does not appear in the pattern induces a */ | |
695 /* stride equal to the pattern length. */ | |
696 while (BM_tab_base != BM_tab) | |
697 { | |
698 *--BM_tab = j; | |
699 *--BM_tab = j; | |
700 *--BM_tab = j; | |
701 *--BM_tab = j; | |
702 } | |
703 i = 0; | |
704 while (i != infinity) | |
705 { | |
706 j = pat[i]; i += direction; | |
707 if (i == dirlen) i = infinity; | |
708 if ((int) trt) | |
709 { | |
710 k = (j = trt[j]); | |
711 if (i == infinity) | |
712 stride_for_teases = BM_tab[j]; | |
713 BM_tab[j] = dirlen - i; | |
714 /* A translation table is accompanied by its inverse -- see */ | |
715 /* comment following downcase_table for details */ | |
716 while ((j = inverse_trt[j]) != k) | |
717 BM_tab[j] = dirlen - i; | |
718 } | |
719 else | |
720 { | |
721 if (i == infinity) | |
722 stride_for_teases = BM_tab[j]; | |
723 BM_tab[j] = dirlen - i; | |
724 } | |
725 /* stride_for_teases tells how much to stride if we get a */ | |
726 /* match on the far character but are subsequently */ | |
727 /* disappointed, by recording what the stride would have been */ | |
728 /* for that character if the last character had been */ | |
729 /* different. */ | |
730 } | |
731 infinity = dirlen - infinity; | |
732 pos += dirlen - ((direction > 0) ? direction : 0); | |
733 /* loop invariant - pos points at where last char (first char if reverse) | |
734 of pattern would align in a possible match. */ | |
735 while (n != 0) | |
736 { | |
737 if ((lim - pos - (direction > 0)) * direction < 0) | |
738 return (n * (0 - direction)); | |
739 /* First we do the part we can by pointers (maybe nothing) */ | |
740 QUIT; | |
741 pat = base_pat; | |
742 limit = pos - dirlen + direction; | |
743 limit = ((direction > 0) | |
744 ? BUFFER_CEILING_OF (limit) | |
745 : BUFFER_FLOOR_OF (limit)); | |
746 /* LIMIT is now the last (not beyond-last!) value | |
747 POS can take on without hitting edge of buffer or the gap. */ | |
748 limit = ((direction > 0) | |
749 ? min (lim - 1, min (limit, pos + 20000)) | |
750 : max (lim, max (limit, pos - 20000))); | |
751 if ((limit - pos) * direction > 20) | |
752 { | |
753 p_limit = &FETCH_CHAR (limit); | |
754 p2 = (cursor = &FETCH_CHAR (pos)); | |
755 /* In this loop, pos + cursor - p2 is the surrogate for pos */ | |
756 while (1) /* use one cursor setting as long as i can */ | |
757 { | |
758 if (direction > 0) /* worth duplicating */ | |
759 { | |
760 /* Use signed comparison if appropriate | |
761 to make cursor+infinity sure to be > p_limit. | |
762 Assuming that the buffer lies in a range of addresses | |
763 that are all "positive" (as ints) or all "negative", | |
764 either kind of comparison will work as long | |
765 as we don't step by infinity. So pick the kind | |
766 that works when we do step by infinity. */ | |
767 if ((int) (p_limit + infinity) > (int) p_limit) | |
768 while ((int) cursor <= (int) p_limit) | |
769 cursor += BM_tab[*cursor]; | |
770 else | |
771 while ((unsigned int) cursor <= (unsigned int) p_limit) | |
772 cursor += BM_tab[*cursor]; | |
773 } | |
774 else | |
775 { | |
776 if ((int) (p_limit + infinity) < (int) p_limit) | |
777 while ((int) cursor >= (int) p_limit) | |
778 cursor += BM_tab[*cursor]; | |
779 else | |
780 while ((unsigned int) cursor >= (unsigned int) p_limit) | |
781 cursor += BM_tab[*cursor]; | |
782 } | |
783 /* If you are here, cursor is beyond the end of the searched region. */ | |
784 /* This can happen if you match on the far character of the pattern, */ | |
785 /* because the "stride" of that character is infinity, a number able */ | |
786 /* to throw you well beyond the end of the search. It can also */ | |
787 /* happen if you fail to match within the permitted region and would */ | |
788 /* otherwise try a character beyond that region */ | |
789 if ((cursor - p_limit) * direction <= len) | |
790 break; /* a small overrun is genuine */ | |
791 cursor -= infinity; /* large overrun = hit */ | |
792 i = dirlen - direction; | |
793 if ((int) trt) | |
794 { | |
795 while ((i -= direction) + direction != 0) | |
796 if (pat[i] != trt[*(cursor -= direction)]) | |
797 break; | |
798 } | |
799 else | |
800 { | |
801 while ((i -= direction) + direction != 0) | |
802 if (pat[i] != *(cursor -= direction)) | |
803 break; | |
804 } | |
805 cursor += dirlen - i - direction; /* fix cursor */ | |
806 if (i + direction == 0) | |
807 { | |
808 cursor -= direction; | |
708 | 809 |
810 /* Make sure we have registers in which to store | |
811 the match position. */ | |
812 if (search_regs.num_regs == 0) | |
813 { | |
814 regoff_t *starts, *ends; | |
815 | |
816 starts = | |
817 (regoff_t *) xmalloc (2 * sizeof (regoff_t)); | |
818 ends = | |
819 (regoff_t *) xmalloc (2 * sizeof (regoff_t)); | |
820 re_set_registers (&searchbuf, | |
821 &search_regs, | |
822 2, starts, ends); | |
823 } | |
824 | |
603 | 825 search_regs.start[0] |
826 = pos + cursor - p2 + ((direction > 0) | |
827 ? 1 - len : 0); | |
828 search_regs.end[0] = len + search_regs.start[0]; | |
727 | 829 XSET (last_thing_searched, Lisp_Buffer, current_buffer); |
603 | 830 if ((n -= direction) != 0) |
831 cursor += dirlen; /* to resume search */ | |
832 else | |
833 return ((direction > 0) | |
834 ? search_regs.end[0] : search_regs.start[0]); | |
835 } | |
836 else | |
837 cursor += stride_for_teases; /* <sigh> we lose - */ | |
838 } | |
839 pos += cursor - p2; | |
840 } | |
841 else | |
842 /* Now we'll pick up a clump that has to be done the hard */ | |
843 /* way because it covers a discontinuity */ | |
844 { | |
845 limit = ((direction > 0) | |
846 ? BUFFER_CEILING_OF (pos - dirlen + 1) | |
847 : BUFFER_FLOOR_OF (pos - dirlen - 1)); | |
848 limit = ((direction > 0) | |
849 ? min (limit + len, lim - 1) | |
850 : max (limit - len, lim)); | |
851 /* LIMIT is now the last value POS can have | |
852 and still be valid for a possible match. */ | |
853 while (1) | |
854 { | |
855 /* This loop can be coded for space rather than */ | |
856 /* speed because it will usually run only once. */ | |
857 /* (the reach is at most len + 21, and typically */ | |
858 /* does not exceed len) */ | |
859 while ((limit - pos) * direction >= 0) | |
860 pos += BM_tab[FETCH_CHAR(pos)]; | |
861 /* now run the same tests to distinguish going off the */ | |
862 /* end, a match or a phoney match. */ | |
863 if ((pos - limit) * direction <= len) | |
864 break; /* ran off the end */ | |
865 /* Found what might be a match. | |
866 Set POS back to last (first if reverse) char pos. */ | |
867 pos -= infinity; | |
868 i = dirlen - direction; | |
869 while ((i -= direction) + direction != 0) | |
870 { | |
871 pos -= direction; | |
872 if (pat[i] != (((int) trt) | |
873 ? trt[FETCH_CHAR(pos)] | |
874 : FETCH_CHAR (pos))) | |
875 break; | |
876 } | |
877 /* Above loop has moved POS part or all the way | |
878 back to the first char pos (last char pos if reverse). | |
879 Set it once again at the last (first if reverse) char. */ | |
880 pos += dirlen - i- direction; | |
881 if (i + direction == 0) | |
882 { | |
883 pos -= direction; | |
708 | 884 |
885 /* Make sure we have registers in which to store | |
886 the match position. */ | |
887 if (search_regs.num_regs == 0) | |
888 { | |
889 regoff_t *starts, *ends; | |
890 | |
891 starts = | |
892 (regoff_t *) xmalloc (2 * sizeof (regoff_t)); | |
893 ends = | |
894 (regoff_t *) xmalloc (2 * sizeof (regoff_t)); | |
895 re_set_registers (&searchbuf, | |
896 &search_regs, | |
897 2, starts, ends); | |
898 } | |
899 | |
603 | 900 search_regs.start[0] |
901 = pos + ((direction > 0) ? 1 - len : 0); | |
902 search_regs.end[0] = len + search_regs.start[0]; | |
727 | 903 XSET (last_thing_searched, Lisp_Buffer, current_buffer); |
603 | 904 if ((n -= direction) != 0) |
905 pos += dirlen; /* to resume search */ | |
906 else | |
907 return ((direction > 0) | |
908 ? search_regs.end[0] : search_regs.start[0]); | |
909 } | |
910 else | |
911 pos += stride_for_teases; | |
912 } | |
913 } | |
914 /* We have done one clump. Can we continue? */ | |
915 if ((lim - pos) * direction < 0) | |
916 return ((0 - n) * direction); | |
917 } | |
918 return pos; | |
919 } | |
920 } | |
921 | |
922 /* Given a string of words separated by word delimiters, | |
923 compute a regexp that matches those exact words | |
924 separated by arbitrary punctuation. */ | |
925 | |
926 static Lisp_Object | |
927 wordify (string) | |
928 Lisp_Object string; | |
929 { | |
930 register unsigned char *p, *o; | |
931 register int i, len, punct_count = 0, word_count = 0; | |
932 Lisp_Object val; | |
933 | |
934 CHECK_STRING (string, 0); | |
935 p = XSTRING (string)->data; | |
936 len = XSTRING (string)->size; | |
937 | |
938 for (i = 0; i < len; i++) | |
939 if (SYNTAX (p[i]) != Sword) | |
940 { | |
941 punct_count++; | |
942 if (i > 0 && SYNTAX (p[i-1]) == Sword) word_count++; | |
943 } | |
944 if (SYNTAX (p[len-1]) == Sword) word_count++; | |
945 if (!word_count) return build_string (""); | |
946 | |
947 val = make_string (p, len - punct_count + 5 * (word_count - 1) + 4); | |
948 | |
949 o = XSTRING (val)->data; | |
950 *o++ = '\\'; | |
951 *o++ = 'b'; | |
952 | |
953 for (i = 0; i < len; i++) | |
954 if (SYNTAX (p[i]) == Sword) | |
955 *o++ = p[i]; | |
956 else if (i > 0 && SYNTAX (p[i-1]) == Sword && --word_count) | |
957 { | |
958 *o++ = '\\'; | |
959 *o++ = 'W'; | |
960 *o++ = '\\'; | |
961 *o++ = 'W'; | |
962 *o++ = '*'; | |
963 } | |
964 | |
965 *o++ = '\\'; | |
966 *o++ = 'b'; | |
967 | |
968 return val; | |
969 } | |
970 | |
971 DEFUN ("search-backward", Fsearch_backward, Ssearch_backward, 1, 4, | |
972 "sSearch backward: ", | |
973 "Search backward from point for STRING.\n\ | |
974 Set point to the beginning of the occurrence found, and return point.\n\ | |
975 An optional second argument bounds the search; it is a buffer position.\n\ | |
976 The match found must not extend before that position.\n\ | |
977 Optional third argument, if t, means if fail just return nil (no error).\n\ | |
978 If not nil and not t, position at limit of search and return nil.\n\ | |
979 Optional fourth argument is repeat count--search for successive occurrences.\n\ | |
980 See also the functions `match-beginning', `match-end' and `replace-match'.") | |
981 (string, bound, noerror, count) | |
982 Lisp_Object string, bound, noerror, count; | |
983 { | |
984 return search_command (string, bound, noerror, count, -1, 0); | |
985 } | |
986 | |
987 DEFUN ("search-forward", Fsearch_forward, Ssearch_forward, 1, 4, "sSearch: ", | |
988 "Search forward from point for STRING.\n\ | |
989 Set point to the end of the occurrence found, and return point.\n\ | |
990 An optional second argument bounds the search; it is a buffer position.\n\ | |
991 The match found must not extend after that position. nil is equivalent\n\ | |
992 to (point-max).\n\ | |
993 Optional third argument, if t, means if fail just return nil (no error).\n\ | |
994 If not nil and not t, move to limit of search and return nil.\n\ | |
995 Optional fourth argument is repeat count--search for successive occurrences.\n\ | |
996 See also the functions `match-beginning', `match-end' and `replace-match'.") | |
997 (string, bound, noerror, count) | |
998 Lisp_Object string, bound, noerror, count; | |
999 { | |
1000 return search_command (string, bound, noerror, count, 1, 0); | |
1001 } | |
1002 | |
1003 DEFUN ("word-search-backward", Fword_search_backward, Sword_search_backward, 1, 4, | |
1004 "sWord search backward: ", | |
1005 "Search backward from point for STRING, ignoring differences in punctuation.\n\ | |
1006 Set point to the beginning of the occurrence found, and return point.\n\ | |
1007 An optional second argument bounds the search; it is a buffer position.\n\ | |
1008 The match found must not extend before that position.\n\ | |
1009 Optional third argument, if t, means if fail just return nil (no error).\n\ | |
1010 If not nil and not t, move to limit of search and return nil.\n\ | |
1011 Optional fourth argument is repeat count--search for successive occurrences.") | |
1012 (string, bound, noerror, count) | |
1013 Lisp_Object string, bound, noerror, count; | |
1014 { | |
1015 return search_command (wordify (string), bound, noerror, count, -1, 1); | |
1016 } | |
1017 | |
1018 DEFUN ("word-search-forward", Fword_search_forward, Sword_search_forward, 1, 4, | |
1019 "sWord search: ", | |
1020 "Search forward from point for STRING, ignoring differences in punctuation.\n\ | |
1021 Set point to the end of the occurrence found, and return point.\n\ | |
1022 An optional second argument bounds the search; it is a buffer position.\n\ | |
1023 The match found must not extend after that position.\n\ | |
1024 Optional third argument, if t, means if fail just return nil (no error).\n\ | |
1025 If not nil and not t, move to limit of search and return nil.\n\ | |
1026 Optional fourth argument is repeat count--search for successive occurrences.") | |
1027 (string, bound, noerror, count) | |
1028 Lisp_Object string, bound, noerror, count; | |
1029 { | |
1030 return search_command (wordify (string), bound, noerror, count, 1, 1); | |
1031 } | |
1032 | |
1033 DEFUN ("re-search-backward", Fre_search_backward, Sre_search_backward, 1, 4, | |
1034 "sRE search backward: ", | |
1035 "Search backward from point for match for regular expression REGEXP.\n\ | |
1036 Set point to the beginning of the match, and return point.\n\ | |
1037 The match found is the one starting last in the buffer\n\ | |
1038 and yet ending before the place the origin of the search.\n\ | |
1039 An optional second argument bounds the search; it is a buffer position.\n\ | |
1040 The match found must start at or after that position.\n\ | |
1041 Optional third argument, if t, means if fail just return nil (no error).\n\ | |
1042 If not nil and not t, move to limit of search and return nil.\n\ | |
1043 Optional fourth argument is repeat count--search for successive occurrences.\n\ | |
1044 See also the functions `match-beginning', `match-end' and `replace-match'.") | |
1045 (string, bound, noerror, count) | |
1046 Lisp_Object string, bound, noerror, count; | |
1047 { | |
1048 return search_command (string, bound, noerror, count, -1, 1); | |
1049 } | |
1050 | |
1051 DEFUN ("re-search-forward", Fre_search_forward, Sre_search_forward, 1, 4, | |
1052 "sRE search: ", | |
1053 "Search forward from point for regular expression REGEXP.\n\ | |
1054 Set point to the end of the occurrence found, and return point.\n\ | |
1055 An optional second argument bounds the search; it is a buffer position.\n\ | |
1056 The match found must not extend after that position.\n\ | |
1057 Optional third argument, if t, means if fail just return nil (no error).\n\ | |
1058 If not nil and not t, move to limit of search and return nil.\n\ | |
1059 Optional fourth argument is repeat count--search for successive occurrences.\n\ | |
1060 See also the functions `match-beginning', `match-end' and `replace-match'.") | |
1061 (string, bound, noerror, count) | |
1062 Lisp_Object string, bound, noerror, count; | |
1063 { | |
1064 return search_command (string, bound, noerror, count, 1, 1); | |
1065 } | |
1066 | |
1067 DEFUN ("replace-match", Freplace_match, Sreplace_match, 1, 3, 0, | |
1068 "Replace text matched by last search with NEWTEXT.\n\ | |
1069 If second arg FIXEDCASE is non-nil, do not alter case of replacement text.\n\ | |
1070 Otherwise convert to all caps or cap initials, like replaced text.\n\ | |
1071 If third arg LITERAL is non-nil, insert NEWTEXT literally.\n\ | |
1072 Otherwise treat `\\' as special:\n\ | |
1073 `\\&' in NEWTEXT means substitute original matched text.\n\ | |
1074 `\\N' means substitute what matched the Nth `\\(...\\)'.\n\ | |
1075 If Nth parens didn't match, substitute nothing.\n\ | |
1076 `\\\\' means insert one `\\'.\n\ | |
708 | 1077 FIXEDCASE and LITERAL are optional arguments.\n\ |
603 | 1078 Leaves point at end of replacement text.") |
1079 (string, fixedcase, literal) | |
1080 Lisp_Object string, fixedcase, literal; | |
1081 { | |
1082 enum { nochange, all_caps, cap_initial } case_action; | |
1083 register int pos, last; | |
1084 int some_multiletter_word; | |
1085 int some_letter = 0; | |
1086 register int c, prevc; | |
1087 int inslen; | |
1088 | |
1089 CHECK_STRING (string, 0); | |
1090 | |
1091 case_action = nochange; /* We tried an initialization */ | |
1092 /* but some C compilers blew it */ | |
621 | 1093 |
1094 if (search_regs.num_regs <= 0) | |
1095 error ("replace-match called before any match found"); | |
1096 | |
603 | 1097 if (search_regs.start[0] < BEGV |
1098 || search_regs.start[0] > search_regs.end[0] | |
1099 || search_regs.end[0] > ZV) | |
1100 args_out_of_range(make_number (search_regs.start[0]), | |
1101 make_number (search_regs.end[0])); | |
1102 | |
1103 if (NILP (fixedcase)) | |
1104 { | |
1105 /* Decide how to casify by examining the matched text. */ | |
1106 | |
1107 last = search_regs.end[0]; | |
1108 prevc = '\n'; | |
1109 case_action = all_caps; | |
1110 | |
1111 /* some_multiletter_word is set nonzero if any original word | |
1112 is more than one letter long. */ | |
1113 some_multiletter_word = 0; | |
1114 | |
1115 for (pos = search_regs.start[0]; pos < last; pos++) | |
1116 { | |
1117 c = FETCH_CHAR (pos); | |
1118 if (LOWERCASEP (c)) | |
1119 { | |
1120 /* Cannot be all caps if any original char is lower case */ | |
1121 | |
1122 case_action = cap_initial; | |
1123 if (SYNTAX (prevc) != Sword) | |
1124 { | |
1125 /* Cannot even be cap initials | |
1126 if some original initial is lower case */ | |
1127 case_action = nochange; | |
1128 break; | |
1129 } | |
1130 else | |
1131 some_multiletter_word = 1; | |
1132 } | |
1133 else if (!NOCASEP (c)) | |
1134 { | |
1135 some_letter = 1; | |
1136 if (!some_multiletter_word && SYNTAX (prevc) == Sword) | |
1137 some_multiletter_word = 1; | |
1138 } | |
1139 | |
1140 prevc = c; | |
1141 } | |
1142 | |
1143 /* Do not make new text all caps | |
1144 if the original text contained only single letter words. */ | |
1145 if (case_action == all_caps && !some_multiletter_word) | |
1146 case_action = cap_initial; | |
1147 | |
1148 if (!some_letter) case_action = nochange; | |
1149 } | |
1150 | |
1151 SET_PT (search_regs.end[0]); | |
1152 if (!NILP (literal)) | |
1153 Finsert (1, &string); | |
1154 else | |
1155 { | |
1156 struct gcpro gcpro1; | |
1157 GCPRO1 (string); | |
1158 | |
1159 for (pos = 0; pos < XSTRING (string)->size; pos++) | |
1160 { | |
1161 c = XSTRING (string)->data[pos]; | |
1162 if (c == '\\') | |
1163 { | |
1164 c = XSTRING (string)->data[++pos]; | |
1165 if (c == '&') | |
1166 Finsert_buffer_substring (Fcurrent_buffer (), | |
1167 make_number (search_regs.start[0]), | |
1168 make_number (search_regs.end[0])); | |
621 | 1169 else if (c >= '1' && c <= search_regs.num_regs + '0') |
603 | 1170 { |
1171 if (search_regs.start[c - '0'] >= 1) | |
1172 Finsert_buffer_substring (Fcurrent_buffer (), | |
1173 make_number (search_regs.start[c - '0']), | |
1174 make_number (search_regs.end[c - '0'])); | |
1175 } | |
1176 else | |
1177 insert_char (c); | |
1178 } | |
1179 else | |
1180 insert_char (c); | |
1181 } | |
1182 UNGCPRO; | |
1183 } | |
1184 | |
1185 inslen = point - (search_regs.end[0]); | |
1186 del_range (search_regs.start[0], search_regs.end[0]); | |
1187 | |
1188 if (case_action == all_caps) | |
1189 Fupcase_region (make_number (point - inslen), make_number (point)); | |
1190 else if (case_action == cap_initial) | |
1191 upcase_initials_region (make_number (point - inslen), make_number (point)); | |
1192 return Qnil; | |
1193 } | |
1194 | |
1195 static Lisp_Object | |
1196 match_limit (num, beginningp) | |
1197 Lisp_Object num; | |
1198 int beginningp; | |
1199 { | |
1200 register int n; | |
1201 | |
1202 CHECK_NUMBER (num, 0); | |
1203 n = XINT (num); | |
621 | 1204 if (n < 0 || n >= search_regs.num_regs) |
1205 args_out_of_range (num, make_number (search_regs.num_regs)); | |
1206 if (search_regs.num_regs <= 0 | |
1207 || search_regs.start[n] < 0) | |
603 | 1208 return Qnil; |
1209 return (make_number ((beginningp) ? search_regs.start[n] | |
1210 : search_regs.end[n])); | |
1211 } | |
1212 | |
1213 DEFUN ("match-beginning", Fmatch_beginning, Smatch_beginning, 1, 1, 0, | |
1214 "Return position of start of text matched by last search.\n\ | |
1215 ARG, a number, specifies which parenthesized expression in the last regexp.\n\ | |
1216 Value is nil if ARGth pair didn't match, or there were less than ARG pairs.\n\ | |
1217 Zero means the entire text matched by the whole regexp or whole string.") | |
1218 (num) | |
1219 Lisp_Object num; | |
1220 { | |
1221 return match_limit (num, 1); | |
1222 } | |
1223 | |
1224 DEFUN ("match-end", Fmatch_end, Smatch_end, 1, 1, 0, | |
1225 "Return position of end of text matched by last search.\n\ | |
1226 ARG, a number, specifies which parenthesized expression in the last regexp.\n\ | |
1227 Value is nil if ARGth pair didn't match, or there were less than ARG pairs.\n\ | |
1228 Zero means the entire text matched by the whole regexp or whole string.") | |
1229 (num) | |
1230 Lisp_Object num; | |
1231 { | |
1232 return match_limit (num, 0); | |
1233 } | |
1234 | |
1235 DEFUN ("match-data", Fmatch_data, Smatch_data, 0, 0, 0, | |
1236 "Return a list containing all info on what the last search matched.\n\ | |
1237 Element 2N is `(match-beginning N)'; element 2N + 1 is `(match-end N)'.\n\ | |
1238 All the elements are markers or nil (nil if the Nth pair didn't match)\n\ | |
1239 if the last match was on a buffer; integers or nil if a string was matched.\n\ | |
1240 Use `store-match-data' to reinstate the data in this list.") | |
1241 () | |
1242 { | |
621 | 1243 Lisp_Object *data; |
603 | 1244 int i, len; |
1245 | |
727 | 1246 if (NILP (last_thing_searched)) |
1247 error ("match-data called before any match found"); | |
1248 | |
621 | 1249 data = (Lisp_Object *) alloca ((2 * search_regs.num_regs) |
1250 * sizeof (Lisp_Object)); | |
1251 | |
603 | 1252 len = -1; |
621 | 1253 for (i = 0; i < search_regs.num_regs; i++) |
603 | 1254 { |
1255 int start = search_regs.start[i]; | |
1256 if (start >= 0) | |
1257 { | |
727 | 1258 if (EQ (last_thing_searched, Qt)) |
603 | 1259 { |
1260 XFASTINT (data[2 * i]) = start; | |
1261 XFASTINT (data[2 * i + 1]) = search_regs.end[i]; | |
1262 } | |
727 | 1263 else if (XTYPE (last_thing_searched) == Lisp_Buffer) |
603 | 1264 { |
1265 data[2 * i] = Fmake_marker (); | |
727 | 1266 Fset_marker (data[2 * i], |
1267 make_number (start), | |
1268 last_thing_searched); | |
603 | 1269 data[2 * i + 1] = Fmake_marker (); |
1270 Fset_marker (data[2 * i + 1], | |
727 | 1271 make_number (search_regs.end[i]), |
1272 last_thing_searched); | |
603 | 1273 } |
727 | 1274 else |
1275 /* last_thing_searched must always be Qt, a buffer, or Qnil. */ | |
1276 abort (); | |
1277 | |
603 | 1278 len = i; |
1279 } | |
1280 else | |
1281 data[2 * i] = data [2 * i + 1] = Qnil; | |
1282 } | |
1283 return Flist (2 * len + 2, data); | |
1284 } | |
1285 | |
1286 | |
1287 DEFUN ("store-match-data", Fstore_match_data, Sstore_match_data, 1, 1, 0, | |
1288 "Set internal data on last search match from elements of LIST.\n\ | |
1289 LIST should have been created by calling `match-data' previously.") | |
1290 (list) | |
1291 register Lisp_Object list; | |
1292 { | |
1293 register int i; | |
1294 register Lisp_Object marker; | |
1295 | |
1296 if (!CONSP (list) && !NILP (list)) | |
1297 list = wrong_type_argument (Qconsp, list, 0); | |
1298 | |
727 | 1299 /* Unless we find a marker with a buffer in LIST, assume that this |
1300 match data came from a string. */ | |
1301 last_thing_searched = Qt; | |
1302 | |
621 | 1303 /* Allocate registers if they don't already exist. */ |
1304 { | |
1523
bd61aaa7828b
* search.c (Fstore_match_data): Don't assume Flength returns an
Jim Blandy <jimb@redhat.com>
parents:
1413
diff
changeset
|
1305 int length = XFASTINT (Flength (list)) / 2; |
621 | 1306 |
1307 if (length > search_regs.num_regs) | |
1308 { | |
708 | 1309 if (search_regs.num_regs == 0) |
1310 { | |
1311 search_regs.start | |
1312 = (regoff_t *) xmalloc (length * sizeof (regoff_t)); | |
1313 search_regs.end | |
1314 = (regoff_t *) xmalloc (length * sizeof (regoff_t)); | |
1315 } | |
621 | 1316 else |
708 | 1317 { |
1318 search_regs.start | |
1319 = (regoff_t *) xrealloc (search_regs.start, | |
1320 length * sizeof (regoff_t)); | |
1321 search_regs.end | |
1322 = (regoff_t *) xrealloc (search_regs.end, | |
1323 length * sizeof (regoff_t)); | |
1324 } | |
621 | 1325 |
708 | 1326 re_set_registers (&searchbuf, &search_regs, length, |
1327 search_regs.start, search_regs.end); | |
621 | 1328 } |
1329 } | |
1330 | |
1331 for (i = 0; i < search_regs.num_regs; i++) | |
603 | 1332 { |
1333 marker = Fcar (list); | |
1334 if (NILP (marker)) | |
1335 { | |
1336 search_regs.start[i] = -1; | |
1337 list = Fcdr (list); | |
1338 } | |
1339 else | |
1340 { | |
727 | 1341 if (XTYPE (marker) == Lisp_Marker) |
1342 { | |
1343 if (XMARKER (marker)->buffer == 0) | |
1344 XFASTINT (marker) = 0; | |
1345 else | |
1346 XSET (last_thing_searched, Lisp_Buffer, | |
1347 XMARKER (marker)->buffer); | |
1348 } | |
603 | 1349 |
1350 CHECK_NUMBER_COERCE_MARKER (marker, 0); | |
1351 search_regs.start[i] = XINT (marker); | |
1352 list = Fcdr (list); | |
1353 | |
1354 marker = Fcar (list); | |
1355 if (XTYPE (marker) == Lisp_Marker | |
1356 && XMARKER (marker)->buffer == 0) | |
1357 XFASTINT (marker) = 0; | |
1358 | |
1359 CHECK_NUMBER_COERCE_MARKER (marker, 0); | |
1360 search_regs.end[i] = XINT (marker); | |
1361 } | |
1362 list = Fcdr (list); | |
1363 } | |
1364 | |
1365 return Qnil; | |
1366 } | |
1367 | |
1368 /* Quote a string to inactivate reg-expr chars */ | |
1369 | |
1370 DEFUN ("regexp-quote", Fregexp_quote, Sregexp_quote, 1, 1, 0, | |
1371 "Return a regexp string which matches exactly STRING and nothing else.") | |
1372 (str) | |
1373 Lisp_Object str; | |
1374 { | |
1375 register unsigned char *in, *out, *end; | |
1376 register unsigned char *temp; | |
1377 | |
1378 CHECK_STRING (str, 0); | |
1379 | |
1380 temp = (unsigned char *) alloca (XSTRING (str)->size * 2); | |
1381 | |
1382 /* Now copy the data into the new string, inserting escapes. */ | |
1383 | |
1384 in = XSTRING (str)->data; | |
1385 end = in + XSTRING (str)->size; | |
1386 out = temp; | |
1387 | |
1388 for (; in != end; in++) | |
1389 { | |
1390 if (*in == '[' || *in == ']' | |
1391 || *in == '*' || *in == '.' || *in == '\\' | |
1392 || *in == '?' || *in == '+' | |
1393 || *in == '^' || *in == '$') | |
1394 *out++ = '\\'; | |
1395 *out++ = *in; | |
1396 } | |
1397 | |
1398 return make_string (temp, out - temp); | |
1399 } | |
1400 | |
1401 syms_of_search () | |
1402 { | |
1403 register int i; | |
1404 | |
1405 searchbuf.allocated = 100; | |
605 | 1406 searchbuf.buffer = (unsigned char *) malloc (searchbuf.allocated); |
603 | 1407 searchbuf.fastmap = search_fastmap; |
1408 | |
1409 Qsearch_failed = intern ("search-failed"); | |
1410 staticpro (&Qsearch_failed); | |
1411 Qinvalid_regexp = intern ("invalid-regexp"); | |
1412 staticpro (&Qinvalid_regexp); | |
1413 | |
1414 Fput (Qsearch_failed, Qerror_conditions, | |
1415 Fcons (Qsearch_failed, Fcons (Qerror, Qnil))); | |
1416 Fput (Qsearch_failed, Qerror_message, | |
1417 build_string ("Search failed")); | |
1418 | |
1419 Fput (Qinvalid_regexp, Qerror_conditions, | |
1420 Fcons (Qinvalid_regexp, Fcons (Qerror, Qnil))); | |
1421 Fput (Qinvalid_regexp, Qerror_message, | |
1422 build_string ("Invalid regexp")); | |
1423 | |
1424 last_regexp = Qnil; | |
1425 staticpro (&last_regexp); | |
1426 | |
727 | 1427 last_thing_searched = Qnil; |
1428 staticpro (&last_thing_searched); | |
1429 | |
603 | 1430 defsubr (&Sstring_match); |
1431 defsubr (&Slooking_at); | |
1432 defsubr (&Sskip_chars_forward); | |
1433 defsubr (&Sskip_chars_backward); | |
1434 defsubr (&Ssearch_forward); | |
1435 defsubr (&Ssearch_backward); | |
1436 defsubr (&Sword_search_forward); | |
1437 defsubr (&Sword_search_backward); | |
1438 defsubr (&Sre_search_forward); | |
1439 defsubr (&Sre_search_backward); | |
1440 defsubr (&Sreplace_match); | |
1441 defsubr (&Smatch_beginning); | |
1442 defsubr (&Smatch_end); | |
1443 defsubr (&Smatch_data); | |
1444 defsubr (&Sstore_match_data); | |
1445 defsubr (&Sregexp_quote); | |
1446 } |