annotate lisp/pcvs-parse.el @ 28949:856f1364a955

(comment-string-strip): Strip terminating newlines. (comment-search-forward): Make LIMIT compulsory. If an unterminated string (rather than a comment) is found, try again, assuming that the region starts inside a string. (comment-beginning): Make sure we don't move if we find a comment but it's not the one we're in. (comment-enter-backward): Handle the case where comment-end-skip fails. (comment-indent): Normalize variables and use line-end-position. (comment-kill): Use line-end-position. (comment-spill): Remove. (comment-indent-new-line): Renamed from indent-new-comment-line. Cleaned up old commented-out code. Reset comment-continue and comment-end before calling comment-indent.

;;; pcvs-parse.el --- The CVS output parser

;; Copyright (C) 1991-2000  Free Software Foundation, Inc.

;; Author: Stefan Monnier <[e-mail]>
;; Keywords: pcl-cvs
;; Version: $Name:  $
;; Revision: $Id: pcvs-parse.el,v 1.1 2000/03/11 03:42:29 monnier Exp $

;; This file is part of GNU Emacs.

;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING.  If not, write to the
;; Free Software Foundation, Inc., 59 Temple Place - Suite 330,
;; Boston, MA 02111-1307, USA.

;;; Commentary:


;;; Code:

(eval-when-compile (require 'cl))

(require 'pcvs-util)
(require 'pcvs-info)

;; imported from pcvs.el
(defvar cvs-execute-single-dir)

;; parse vars

(defcustom cvs-update-prog-output-skip-regexp "$"
  "*A regexp that matches the end of the output from all cvs update programs.
That is, output from any programs that are run by CVS (by the flag -u
in the `modules' file - see cvs(5)) when `cvs update' is performed should
terminate with a line that this regexp matches.  It is enough that
some part of the line is matched.

The default (a single $) fits programs without output."
  :group 'pcl-cvs
  :type '(regexp :value "$"))

(defcustom cvs-parse-ignored-messages
  '("Executing ssh-askpass to query the password.*$"
    ".*Remote host denied X11 forwarding.*$")
  "*A list of regexps matching messages that should be ignored by the parser.
Each regexp should match a whole set of lines and should hence be terminated
by `$'."
  :group 'pcl-cvs
  :type '(repeat regexp))

;; a few more defvars just to shut up the compiler
(defvar cvs-start)
(defvar cvs-current-dir)
(defvar cvs-current-subdir)
(defvar dont-change-disc)

;;;; The parser

(defconst cvs-parse-known-commands
  '("status" "add" "commit" "update" "remove" "checkout" "ci")
  "List of CVS commands whose output is understood by the parser.")

(defun cvs-parse-buffer (parse-spec dont-change-disc &optional subdir)
  "Parse current buffer according to PARSE-SPEC.
PARSE-SPEC is a function of no argument advancing the point and returning
  either a fileinfo or t (if the matched text should be ignored) or
  nil if it didn't match anything.
DONT-CHANGE-DISC just indicates whether the command was changing the disc
  or not (useful to tell the difference btween `cvs-examine' and `cvs-update'
  ouytput.
The path names should be interpreted as relative to SUBDIR (defaults
  to the `default-directory').
Return a list of collected entries, or t if an error occured."
  (goto-char (point-min))
  (let ((fileinfos ())
	(cvs-current-dir "")
	(case-fold-search nil)
	(cvs-current-subdir (or subdir "")))
    (while (not (or (eobp) (eq fileinfos t)))
      (let ((ret (cvs-parse-run-table parse-spec)))
	(cond
	 ;; it matched a known information message
	 ((cvs-fileinfo-p ret) (push ret fileinfos))
	 ;; it didn't match anything at all (impossible)
	 ((and (consp ret) (cvs-fileinfo-p (car ret)))
	  (setq fileinfos (append ret fileinfos)))
	 ((null ret) (setq fileinfos t))
	 ;; it matched something that should be ignored
	 (t nil))))
    (nreverse fileinfos)))


;; All those parsing macros/functions should return a success indicator
(defsubst cvs-parse-msg () (buffer-substring cvs-start (1- (point))))

;;(defsubst COLLECT (exp) (push exp *result*))
;;(defsubst PROG (e) t)
;;(defmacro SEQ (&rest seqs) (cons 'and seqs))

(defmacro cvs-match (re &rest matches)
  "Try to match RE and extract submatches.
If RE matches, advance the point until the line after the match and
then assign the variables as specified in MATCHES (via `setq')."
  (cons 'cvs-do-match
	(cons re (mapcar (lambda (match)
			   `(cons ',(first match) ,(second match)))
			 matches))))

(defun cvs-do-match (re &rest matches)
  "Internal function for the `cvs-match' macro.
Match RE and if successful, execute MATCHES."
  ;; Is it a match?
  (when (looking-at re)
    (goto-char (match-end 0))
    ;; Skip the newline (unless we already are at the end of the buffer).
    (when (and (eolp) (< (point) (point-max))) (forward-char))
    ;; assign the matches
    (dolist (match matches t)
      (let ((val (cdr match)))
	(set (car match) (if (integerp val) (match-string val) val))))))

(defmacro cvs-or (&rest alts)
  "Try each one of the ALTS alternatives until one matches."
  `(let ((-cvs-parse-point (point)))
     ,(cons 'or
	    (mapcar (lambda (es)
		      `(or ,es (ignore (goto-char -cvs-parse-point))))
		    alts))))
(def-edebug-spec cvs-or t)

;; This is how parser tables should be executed
(defun cvs-parse-run-table (parse-spec)
  "Run PARSE-SPEC and provide sensible default behavior."
  (unless (bolp) (forward-line 1))	;this should never be needed
  (let ((cvs-start (point)))
    (cvs-or
     (funcall parse-spec)

     (dolist (re cvs-parse-ignored-messages)
       (when (cvs-match re) (return t)))

     ;; This is a parse error.  Create a message-type fileinfo.
     (and
      (cvs-match ".*$")
      (cvs-create-fileinfo 'MESSAGE cvs-current-dir " "
			   (concat " Unknown msg: '" (cvs-parse-msg) "'")
			   :subtype 'ERROR)))))


(defun cvs-parsed-fileinfo (type path &optional directory &rest keys)
  "Create a fileinfo.
TYPE can either be a type symbol or a cons of the form (TYPE . SUBTYPE).
PATH is the filename.
DIRECTORY influences the way PATH is interpreted:
- if it's a string, it denotes the directory in which PATH (which should then be
  a plain file name with no directory component) resides.
- if it's nil, the PATH should not be trusted: if it has a directory
  component, use it, else, assume it is relative to the current directory.
- else, the PATH should be trusted to be relative to the root
  directory (i.e. if there is no directory component, it means the file
  is inside the main directory).
The remaining KEYS are passed directly to `cvs-create-fileinfo'."
  (let ((dir directory)
	(file path))
    ;; only trust the directory if it's a string
    (unless (stringp directory)
      ;; else, if the directory is true, the path should be trusted
      (setq dir (or (file-name-directory path) (if directory "")))
      (setq file (file-name-nondirectory path)))

    (let ((type (if (consp type) (car type) type))
	  (subtype (if (consp type) (cdr type))))
      (when dir (setq cvs-current-dir dir))
      (apply 'cvs-create-fileinfo type
	     (concat cvs-current-subdir (or dir cvs-current-dir))
	     file (cvs-parse-msg) :subtype subtype keys))))


;;;; CVS Process Parser Tables:
;;;;
;;;; The table for status and update could actually be merged since they
;;;; don't conflict.  But they don't overlap much either.

(defun cvs-parse-table ()
  "Table of message objects for `cvs-parse-process'."
  (let (c file dir path type base-rev subtype)
    (cvs-or
     
     (cvs-parse-status)
     (cvs-parse-merge)
     (cvs-parse-commit)

     ;; this is not necessary because the fileinfo merging will remove
     ;; such duplicate info and luckily the second info is the one we want.
     ;; (and (cvs-match "M \\(.*\\)$" (path 1))
     ;;      (cvs-parse-merge path))
     
     ;; Normal file state indicator.
     (and
      (cvs-match "\\([MARCUPNJ?]\\) \\(.*\\)$" (c 1) (path 2))
      ;; M: The file is modified by the user, and untouched in the repository.
      ;; A: The file is "cvs add"ed, but not "cvs ci"ed.
      ;; R: The file is "cvs remove"ed, but not "cvs ci"ed.
      ;; C: Conflict
      ;; U: The file is copied from the repository.
      ;; P: The file was patched from the repository.
      ;; ?: Unknown file.
      (let ((code (aref c 0)))
	(cvs-parsed-fileinfo (case code
			       (?M 'MODIFIED)
			       (?A 'ADDED)
			       (?R 'REMOVED)
			       (?? 'UNKNOWN)
			       (?C 'CONFLICT) ;(if dont-change-disc 'NEED-MERGE
			       (?J 'NEED-MERGE)	;not supported by standard CVS
			       ((?U ?P)
				(if dont-change-disc
				    'NEED-UPDATE
				  (cons 'UP-TO-DATE
					(if (eq code ?U) 'UPDATED 'PATCHED)))))
			     path 'trust)))

     (and
      (cvs-match "pcl-cvs: descending directory \\(.*\\)$" (dir 1))
      (setq cvs-current-subdir dir))

     ;; A special cvs message
     (and
      (cvs-match "cvs[.ex]* [a-z]+: ")
      (cvs-or

       ;; CVS is descending a subdirectory
       ;; (status says `examining' while update says `updating')
       (and
	(cvs-match "\\(Examining\\|Updating\\) \\(.*\\)$" (dir 2))
	(let ((dir (if (string= "." dir) "" (file-name-as-directory dir))))
	  (cvs-parsed-fileinfo 'DIRCHANGE "." dir)))

       ;; [-n update] A new (or pruned) directory appeared but isn't traversed
       (and
	(cvs-match "New directory `\\(.*\\)' -- ignored$" (dir 1))
	(cvs-parsed-fileinfo 'MESSAGE " " (file-name-as-directory dir)))

       ;; File removed, since it is removed (by third party) in repository.
       (and
	(cvs-or
	 (cvs-match "warning: \\(.*\\) is not (any longer) pertinent$" (file 1))
	 (cvs-match "\\(.*\\) is no longer in the repository$" (file 1)))
	(cvs-parsed-fileinfo 'DEAD file))

       ;; [add]
       (and
	(cvs-or
	 (cvs-match "scheduling file `\\(.*\\)' for addition.*$" (path 1))
	 (cvs-match "re-adding file \\(.*\\) (in place of .*)$" (path 1)))
	(cvs-parsed-fileinfo 'ADDED path))

       ;; [add] this will also show up as a `U <file>'
       (and
	(cvs-match "\\(.*\\), version \\(.*\\), resurrected$"
		   (path 1) (base-rev 2))
	(cvs-parsed-fileinfo '(UP-TO-DATE . RESURRECTED) path nil
			     :base-rev base-rev))

       ;; [remove]
       (and
	(cvs-match "removed `\\(.*\\)'$" (path 1))
	(cvs-parsed-fileinfo 'DEAD path))

       ;; [remove,merge]
       (and
	(cvs-match "scheduling `\\(.*\\)' for removal$" (file 1))
	(cvs-parsed-fileinfo 'REMOVED file))

       ;; [update] File removed by you, but not cvs rm'd
       (and
	(cvs-match "warning: \\(.*\\) was lost$" (path 1))
	(cvs-match (concat "U " (regexp-quote path) "$"))
	(cvs-parsed-fileinfo (if dont-change-disc
				 'MISSING
			       '(UP-TO-DATE . UPDATED))
			     path))
     
       ;; Mode conflicts (rather than contents)
       (and
	(cvs-match "conflict: ")
	(cvs-or
	 (cvs-match "removed \\(.*\\) was modified by second party$"
		    (path 1) (subtype 'REMOVED))
	 (cvs-match "\\(.*\\) created independently by second party$"
		    (path 1) (subtype 'ADDED))
	 (cvs-match "\\(.*\\) is modified but no longer in the repository$"
		    (path 1) (subtype 'MODIFIED)))
	(cvs-match (concat "C " (regexp-quote path)))
	(cvs-parsed-fileinfo (cons 'CONFLICT subtype) path))

       ;; Messages that should be shown to the user
       (and
	(cvs-or
	 (cvs-match "move away \\(.*\\); it is in the way$" (file 1))
	 (cvs-match "warning: new-born \\(.*\\) has disappeared$" (file 1))
	 (cvs-match "sticky tag .* for file `\\(.*\\)' is not a branch$"
		    (file 1)))
	(cvs-parsed-fileinfo 'MESSAGE file))
     
       ;; File unknown.
       (and (cvs-match "use `.+ add' to create an entry for \\(.*\\)$" (path 1))
	    (cvs-parsed-fileinfo 'UNKNOWN path))

       ;; [commit]
       (and (cvs-match "Up-to-date check failed for `\\(.+\\)'$" (file 1))
	    (cvs-parsed-fileinfo 'NEED-MERGE file))

       ;; We use cvs-execute-multi-dir but cvs can't handle it
       ;; Probably because the cvs-client can but the cvs-server can't
       (and (cvs-match ".* files with '?/'? in their name.*$")
	    (not cvs-execute-single-dir)
	    (setq cvs-execute-single-dir t)
	    (cvs-create-fileinfo
	     'MESSAGE "" " "
	     "*** Add (setq cvs-execute-single-dir t) to your .emacs ***
	See the FAQ file or the variable's documentation for more info."))
       
       ;; Cvs waits for a lock.  Ignored: already handled by the process filter
       (cvs-match "\\[..:..:..\\] \\(waiting for\\|obtained\\) .*lock in .*$")
       ;; File you removed still exists.  Ignore (will be noted as removed).
       (cvs-match ".* should be removed and is still there$")
       ;; just a note
       (cvs-match "use '.+ commit' to \\sw+ th\\sw+ files? permanently$")
       ;; [add,status] followed by a more complete status description anyway
       (cvs-match "nothing known about .*$")
       ;; [update] problem with patch
       (cvs-match "checksum failure after patch to .*; will refetch$")
       (cvs-match "refetching unpatchable files$")
       ;; [commit]
       (cvs-match "Rebuilding administrative file database$")
     
       ;; CVS is running a *info program.
       (and
	(cvs-match "Executing.*$")
	;; Skip by any output the program may generate to stdout.
	;; Note that pcl-cvs will get seriously confused if the
	;; program prints anything to stderr.
	(re-search-forward cvs-update-prog-output-skip-regexp))))

     (and
      (cvs-match "cvs[.ex]* \\[[a-z]+ aborted\\]:.*$")
      (cvs-parsed-fileinfo 'MESSAGE ""))
     
     ;; sadly you can't do much with these since the path is in the repository
     (cvs-match "Directory .* added to the repository$")
     )))


(defun cvs-parse-merge ()
  (let (path base-rev head-rev handled type)
    ;; A merge (maybe with a conflict).
    (and
     (cvs-match "RCS file: .*$")
     ;; Squirrel away info about the files that were retrieved for merging
     (cvs-match "retrieving revision \\([0-9.]+\\)$" (base-rev 1))
     (cvs-match "retrieving revision \\([0-9.]+\\)$" (head-rev 1))
     (cvs-match "Merging differences between [0-9.]+ and [0-9.]+ into \\(.*\\)$"
		(path 1))

     ;; eat up potential conflict warnings
     (cvs-or (cvs-match "\\(rcs\\)?merge:?\\( warning\\)?: \\(overlaps\\|conflicts\\) \\(or other problems \\)?during merge$" (type 'CONFLICT)) t)
     (cvs-or
      (and
       (cvs-match "cvs[.ex]* [a-z]+: ")
       (cvs-or
	(cvs-match "conflicts found in \\(.*\\)$" (path 1) (type 'CONFLICT))
	(cvs-match "could not merge .*$")
	(cvs-match "restoring \\(.*\\) from backup file .*$" (path 1))))
      t)

     ;; Is it a succesful merge?
     ;; Figure out result of merging (ie, was there a conflict?)
     (let ((qfile (regexp-quote path)))
       (cvs-or
	;; Conflict
	(and
	 (cvs-match (concat "C \\(.*" qfile "\\)$") (path 1) (type 'CONFLICT))
	 ;; C might be followed by a "suprious" U for non-mergeable files
	 (cvs-or (cvs-match (concat "U \\(.*" qfile "\\)$")) t))
	;; Successful merge
	(cvs-match (concat "M \\(.*" qfile "\\)$") (path 1))
	;; The file already contained the modifications
	(cvs-match (concat "^\\(.*" qfile
			   "\\) already contains the differences between .*$")
		   (path 1) (type '(UP-TO-DATE . MERGED)))
	t)
       (cvs-parsed-fileinfo (if dont-change-disc 'NEED-MERGE
			      (or type '(MODIFIED . MERGED))) path nil
			    :merge (cons base-rev head-rev))))))

(defun cvs-parse-status ()
  (let (nofile path base-rev head-rev type)
    (and
     (cvs-match
      "===================================================================$")
     (cvs-match "File: \\(no file \\)?\\(.*[^ \t]\\)[ \t]+Status: "
		(nofile 1) (path 2))
     (cvs-or
      (cvs-match "Needs \\(Checkout\\|Patch\\)$"
		 (type (if nofile 'MISSING 'NEED-UPDATE)))
      (cvs-match "Up-to-date$"
		 (type (if nofile '(UP-TO-DATE . REMOVED) 'UP-TO-DATE)))
      (cvs-match ".*[Cc]onflict.*$"	(type 'CONFLICT))
      (cvs-match "Locally Added$"		(type 'ADDED))
      (cvs-match "Locally Removed$"	(type 'REMOVED))
      (cvs-match "Locally Modified$"	(type 'MODIFIED))
      (cvs-match "Needs Merge$"		(type 'NEED-MERGE))
      (cvs-match "Unknown$"		(type 'UNKNOWN)))
     (cvs-match "$")
     (cvs-or
      (cvs-match " *Version:[ \t]*\\([0-9.]+\\).*$" (base-rev 1))
      ;; NOTE: there's no date on the end of the following for server mode...
      (cvs-match " *Working revision:[ \t]*-?\\([0-9.]+\\).*$" (base-rev 1))
      ;; Let's not get all worked up if the format changes a bit
      (cvs-match " *Working revision:.*$"))
     (cvs-or
      (cvs-match " *RCS Version:[ \t]*\\([0-9.]+\\)[ \t]*.*$" (head-rev 1))
      (cvs-match " *Repository revision:[ \t]*\\([0-9.]+\\)[ \t]*\\(.*\\)$"
		 (head-rev 1))
      (cvs-match " *Repository revision:.*"))
     (cvs-or
      (and;;sometimes those fields are missing
       (cvs-match " *Sticky Tag:[ \t]*\\(.*\\)$") ; FIXME: use it
       (cvs-match " *Sticky Date:[ \t]*\\(.*\\)$") ; FIXME: use it
       (cvs-match " *Sticky Options:[ \t]*\\(.*\\)$")) ; FIXME: use it
      t)
     (cvs-match "$")
     ;; ignore the tags-listing in the case of `status -v'
     (cvs-or (cvs-match " *Existing Tags:\n\\(\t.*\n\\)*$") t)
     (cvs-parsed-fileinfo type path nil
			  :base-rev base-rev
			  :head-rev head-rev))))

(defun cvs-parse-commit ()
  (let (path base-rev subtype)
    (cvs-or

     (and
      (cvs-match "\\(Checking in\\|Removing\\) \\(.*\\);$" (path 2))
      (cvs-match ".*,v  <--  .*$")
      (cvs-or
       ;; deletion
       (cvs-match "new revision: delete; previous revision: \\([0-9.]*\\)$"
		  (subtype 'REMOVED) (base-rev 1))
       ;; addition
       (cvs-match "initial revision: \\([0-9.]*\\)$"
		  (subtype 'ADDED) (base-rev 1))
       ;; update
       (cvs-match "new revision: \\([0-9.]*\\); previous revision: .*$"
		  (subtype 'COMMITTED) (base-rev 1)))
      (cvs-match "done$")
      ;; it's important here not to rely on the default directory management
      ;; because `cvs commit' might begin by a series of Examining messages
      ;; so the processing of the actual checkin messages might begin with
      ;; a `current-dir' set to something different from ""
      (cvs-parsed-fileinfo (cons 'UP-TO-DATE subtype) path 'trust
			   :base-rev base-rev))
     
     ;; useless message added before the actual addition: ignored
     (cvs-match "RCS file: .*\ndone$"))))


(provide 'pcvs-parse)

;;; pcl-cvs-parse.el ends here