annotate lisp/erc/erc-log.el @ 107420:961da90b22a3

Merge from trunk

;;; erc-log.el --- Logging facilities for ERC.

;; Copyright (C) 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.

;; Author: Lawrence Mitchell <[e-mail]>
;; Keywords: IRC, chat, client, Internet, logging

;; Created 2003-04-26
;; Logging code taken from erc.el and modified to use markers.

;; This file is part of GNU Emacs.

;; GNU Emacs is free software: you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation, either version 3 of the License, or
;; (at your option) any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.

;;; Commentary:

;; This file implements log file writing support for ERC.

;; Quick start:
;;
;; (require 'erc-log)
;; (setq erc-log-channels-directory "/path/to/logfiles") ; must be writable
;; (erc-log-enable)
;;
;; Or:
;;
;; M-x customize-variable erc-modules, and add "log".
;;
;; There are two ways to setup logging.  The first (default) method
;; will save buffers on /part, /quit, or killing the channel
;; buffer.
;;
;; The second will write to the log files on each incoming or outgoing
;; line - this may not be optimal on a laptop HDD.  To use this
;; method, add the following to the above instructions.
;;
;; (setq erc-save-buffer-on-part nil
;;       erc-save-queries-on-quit nil
;;       erc-log-write-after-send t
;;       erc-log-write-after-insert t)
;;
;; If you only want to save logs for some buffers, customise the
;; variable `erc-enable-logging'.

;; How it works:
;;
;; If logging is enabled, at some point, `erc-save-buffer-in-logs'
;; will be called.  The "end" of the buffer is taken from
;; `erc-insert-marker', while `erc-last-saved-position' holds the
;; position the buffer was last saved at (as a marker, or if the
;; buffer hasn't been saved before, as the number 1 (point-min)).

;; The region between `erc-last-saved-position' and
;; `erc-insert-marker' is saved to the current buffer's logfile, and
;; `erc-last-saved-position' is updated to reflect this.

;;; History:
;; 2003-04-26: logging code pulled out of erc.el.  Switched to using
;; markers.

;;; TODO:
;;
;; * Really, we need to lock the logfiles somehow, so that if a user
;;   is running multiple emacsen and/or on the same channel as more
;;   than one user, only one process writes to the logfile.  This is
;;   especially needed for those logfiles with no nick in them, as
;;   these would become corrupted.
;;   For a single emacs process, the problem could be solved using a
;;   variable which contained the names of buffers already being
;;   logged.  This would require that logging be buffer-local,
;;   possibly not a bad thing anyway, since many people don't want to
;;   log the server buffer.
;;   For multiple emacsen the problem is trickier.  On some systems,
;;   on could use the function `lock-buffer' and `unlock-buffer'.
;;   However, file locking isn't implemented on all platforms, for
;;   example, there is none on w32 systems.
;;   A third possibility might be to fake lockfiles.  However, this
;;   might lead to problems if an emacs crashes, as the lockfile
;;   would be left lying around.

;;; Code:

(require 'erc)
(eval-when-compile
  (require 'erc-networks)
  (require 'cl))

(defgroup erc-log nil
  "Logging facilities for ERC."
  :group 'erc)

(defcustom erc-generate-log-file-name-function 'erc-generate-log-file-name-long
  "*A function to generate a log filename.
The function must take five arguments: BUFFER, TARGET, NICK, SERVER and PORT.
BUFFER is the buffer to be saved,
TARGET is the name of the channel, or the target of the query,
NICK is the current nick,
SERVER and PORT are the parameters that were used to connect to BUFFERs
`erc-server-process'.

If you want to write logs into different directories, make a
custom function which returns the directory part and set
`erc-log-channels-directory' to its name."
  :group 'erc-log
  :type '(choice (const :tag "Long style" erc-generate-log-file-name-long)
		 (const :tag "Long, but with network name rather than server"
			erc-generate-log-file-name-network)
		 (const :tag "Short" erc-generate-log-file-name-short)
		 (const :tag "With date" erc-generate-log-file-name-with-date)
		 (function :tag "Other function")))

(defcustom erc-truncate-buffer-on-save nil
  "Truncate any ERC (channel, query, server) buffer when it is saved."
  :group 'erc-log
  :type 'boolean)

(defcustom erc-enable-logging t
  "If non-nil, ERC will log IRC conversations.
This can either be a boolean value of nil or t, or a function.
If the value is a function, it will be called with one argument, the
name of the current ERC buffer.  One possible function, which saves
all but server buffers is `erc-log-all-but-server-buffers'.

This variable is buffer local.  Setting it via \\[customize] sets the
default value.

Log files are stored in `erc-log-channels-directory'."
  :group 'erc-log
  :type '(choice boolean
		 function))
(make-variable-buffer-local 'erc-enable-logging)

(defcustom erc-log-channels-directory "~/log"
  "The directory to place log files for channels.
Leave blank to disable logging.  If not nil, all the channel
buffers are logged in separate files in that directory.  The
directory should not end with a trailing slash.

If this is the name of a function, the function will be called
with the buffer, target, nick, server, and port arguments.  See
`erc-generate-log-file-name-function' for a description of these
arguments."
  :group 'erc-log
  :type '(choice directory
		 (function "Function")
		 (const :tag "Disable logging" nil)))

(defcustom erc-log-insert-log-on-open nil
  "*Insert log file contents into the buffer if a log file exists."
  :group 'erc-log
  :type 'boolean)

(defcustom erc-save-buffer-on-part t
  "*Save the channel buffer content using `erc-save-buffer-in-logs' on PART.

If you set this to nil, you may want to enable both
`erc-log-write-after-send' and `erc-log-write-after-insert'."
  :group 'erc-log
  :type 'boolean)

(defcustom erc-save-queries-on-quit t
  "*Save all query (also channel) buffers of the server on QUIT.

If you set this to nil, you may want to enable both
`erc-log-write-after-send' and `erc-log-write-after-insert'."
  :group 'erc-log
  :type 'boolean)

(defcustom erc-log-write-after-send nil
  "*If non-nil, write to log file after every message you send.

If you set this to nil, you may want to enable both
`erc-save-buffer-on-part' and `erc-save-queries-on-quit'."
  :group 'erc-log
  :type 'boolean)

(defcustom erc-log-write-after-insert nil
  "*If non-nil, write to log file when new text is added to a
logged ERC buffer.

If you set this to nil, you may want to enable both
`erc-save-buffer-on-part' and `erc-save-queries-on-quit'."
  :group 'erc-log
  :type 'boolean)

(defcustom erc-log-file-coding-system (if (featurep 'xemacs)
					  'binary
					'emacs-mule)
  "*The coding system ERC should use for writing log files.

This should ideally, be a \"catch-all\" coding system, like
`emacs-mule', or `iso-2022-7bit'."
  :group 'erc-log)

(defcustom erc-log-filter-function nil
  "*If non-nil, pass text through the given function before writing it to
a log file.

The function should take one argument, which is the text to filter."
  :group 'erc-log
  :type '(choice (function "Function")
		 (const :tag "No filtering" nil)))


;;;###autoload (autoload 'erc-log-mode "erc-log" nil t)
(define-erc-module log nil
  "Automatically logs things you receive on IRC into files.
Files are stored in `erc-log-channels-directory'; file name
format is defined through a formatting function on
`erc-generate-log-file-name-function'.

Since automatic logging is not always a Good Thing (especially if
people say things in different coding systems), you can turn logging
behavior on and off with the variable `erc-enable-logging', which can
also be a predicate function.  To only log when you are not set away, use:

\(setq erc-enable-logging
      (lambda (buffer)
	(with-current-buffer buffer
	  (null (erc-away-time)))))"
  ;; enable
  ((when erc-log-write-after-insert
     (add-hook 'erc-insert-post-hook 'erc-save-buffer-in-logs))
   (when erc-log-write-after-send
     (add-hook 'erc-send-post-hook 'erc-save-buffer-in-logs))
   (add-hook 'erc-kill-buffer-hook 'erc-save-buffer-in-logs)
   (add-hook 'erc-kill-channel-hook 'erc-save-buffer-in-logs)
   (add-hook 'kill-emacs-hook 'erc-log-save-all-buffers)
   (add-hook 'erc-quit-hook 'erc-conditional-save-queries)
   (add-hook 'erc-part-hook 'erc-conditional-save-buffer)
   ;; append, so that 'erc-initialize-log-marker runs first
   (add-hook 'erc-connect-pre-hook 'erc-log-setup-logging 'append)
   (dolist (buffer (erc-buffer-list))
     (erc-log-setup-logging buffer)))
  ;; disable
  ((remove-hook 'erc-insert-post-hook 'erc-save-buffer-in-logs)
   (remove-hook 'erc-send-post-hook 'erc-save-buffer-in-logs)
   (remove-hook 'erc-kill-buffer-hook 'erc-save-buffer-in-logs)
   (remove-hook 'erc-kill-channel-hook 'erc-save-buffer-in-logs)
   (remove-hook 'kill-emacs-hook 'erc-log-save-all-buffers)
   (remove-hook 'erc-quit-hook 'erc-conditional-save-queries)
   (remove-hook 'erc-part-hook 'erc-conditional-save-buffer)
   (remove-hook 'erc-connect-pre-hook 'erc-log-setup-logging)
   (dolist (buffer (erc-buffer-list))
     (erc-log-disable-logging buffer))))

(define-key erc-mode-map "\C-c\C-l" 'erc-save-buffer-in-logs)

;;; functionality referenced from erc.el
(defun erc-log-setup-logging (buffer)
  "Setup the buffer-local logging variables in the current buffer.
This function is destined to be run from `erc-connect-pre-hook'.
The current buffer is given by BUFFER."
  (when (erc-logging-enabled buffer)
    (with-current-buffer buffer
      (auto-save-mode -1)
      (setq buffer-file-name nil)
      (erc-set-write-file-functions '(erc-save-buffer-in-logs))
      (when erc-log-insert-log-on-open
	(ignore-errors (insert-file-contents (erc-current-logfile))
		       (move-marker erc-last-saved-position
				    (1- (point-max))))))))

(defun erc-log-disable-logging (buffer)
  "Disable logging in BUFFER."
  (when (erc-logging-enabled buffer)
    (with-current-buffer buffer
      (setq buffer-offer-save nil
	    erc-enable-logging nil))))

(defun erc-log-all-but-server-buffers (buffer)
  "Returns t if logging should be enabled in BUFFER.
Returns nil if `erc-server-buffer-p' returns t."
  (save-excursion
    (save-window-excursion
      (set-buffer buffer)
      (not (erc-server-buffer-p)))))

(defun erc-save-query-buffers (process)
  "Save all buffers of the given PROCESS."
  (erc-with-all-buffers-of-server process
				  nil
				  (erc-save-buffer-in-logs)))

(defun erc-conditional-save-buffer (buffer)
  "Save Query BUFFER if `erc-save-queries-on-quit' is t."
  (when erc-save-buffer-on-part
    (erc-save-buffer-in-logs buffer)))

(defun erc-conditional-save-queries (process)
  "Save Query buffers of PROCESS if `erc-save-queries-on-quit' is t."
  (when erc-save-queries-on-quit
    (erc-save-query-buffers process)))

;; Make sure that logs get saved, even if someone overrides the active
;; process prompt for a quick exit from Emacs
(defun erc-log-save-all-buffers ()
  (dolist (buffer (erc-buffer-list))
    (erc-save-buffer-in-logs buffer)))

;;;###autoload
(defun erc-logging-enabled (&optional buffer)
  "Return non-nil if logging is enabled for BUFFER.
If BUFFER is nil, the value of `current-buffer' is used.
Logging is enabled if `erc-log-channels-directory' is non-nil, the directory
is writeable (it will be created as necessary) and
`erc-enable-logging' returns a non-nil value."
  (and erc-log-channels-directory
       (or (functionp erc-log-channels-directory)
	   (erc-directory-writable-p erc-log-channels-directory))
       (if (functionp erc-enable-logging)
	   (funcall erc-enable-logging (or buffer (current-buffer)))
	 erc-enable-logging)))

(defun erc-log-standardize-name (filename)
  "Make FILENAME safe to use as the name of an ERC log.
This will not work with full paths, only names.

Any unsafe characters in the name are replaced with \"!\".  The
filename is downcased."
  (downcase (erc-replace-regexp-in-string
	     "[/\\]" "!" (convert-standard-filename filename))))

(defun erc-current-logfile (&optional buffer)
  "Return the logfile to use for BUFFER.
If BUFFER is nil, the value of `current-buffer' is used.
This is determined by `erc-generate-log-file-name-function'.
The result is converted to lowercase, as IRC is case-insensitive"
  (unless buffer (setq buffer (current-buffer)))
  (let ((target (or (buffer-name buffer) (erc-default-target)))
	(nick (erc-current-nick))
	(server erc-session-server)
	(port erc-session-port))
    (expand-file-name
     (erc-log-standardize-name
      (funcall erc-generate-log-file-name-function
	       buffer target nick server port))
     (if (functionp erc-log-channels-directory)
	 (funcall erc-log-channels-directory
		  buffer target nick server port)
       erc-log-channels-directory))))

(defun erc-generate-log-file-name-with-date (buffer &rest ignore)
  "This function computes a short log file name.
The name of the log file is composed of BUFFER and the current date.
This function is a possible value for `erc-generate-log-file-name-function'."
  (concat (buffer-name buffer) "-" (format-time-string "%Y-%m-%d") ".txt"))

(defun erc-generate-log-file-name-short (buffer &rest ignore)
  "This function computes a short log file name.
In fact, it only uses the buffer name of the BUFFER argument, so
you can affect that using `rename-buffer' and the-like.  This
function is a possible value for
`erc-generate-log-file-name-function'."
  (concat (buffer-name buffer) ".txt"))

(defun erc-generate-log-file-name-long (buffer target nick server port)
  "Generates a log-file name in the way ERC always did it.
This results in a file name of the form #channel!nick@server:port.txt.
This function is a possible value for `erc-generate-log-file-name-function'."
  (let ((file (concat
	       (if target (concat target "!"))
	       nick "@" server ":" (cond ((stringp port) port)
					 ((numberp port)
					  (number-to-string port))) ".txt")))
    ;; we need a make-safe-file-name function.
    (convert-standard-filename file)))

(defun erc-generate-log-file-name-network (buffer target nick server port)
  "Generates a log-file name using the network name rather than server name.
This results in a file name of the form #channel![e-mail].
This function is a possible value for `erc-generate-log-file-name-function'."
  (require 'erc-networks)
  (let ((file (concat
	       (if target (concat target "!"))
	       nick "@"
	       (or (with-current-buffer buffer (erc-network-name)) server)
	       ".txt")))
    ;; we need a make-safe-file-name function.
    (convert-standard-filename file)))

;;;###autoload
(defun erc-save-buffer-in-logs (&optional buffer)
  "Append BUFFER contents to the log file, if logging is enabled.
If BUFFER is not provided, current buffer is used.
Logging is enabled if `erc-logging-enabled' returns non-nil.

This is normally done on exit, to save the unsaved portion of the
buffer, since only the text that runs off the buffer limit is logged
automatically.

You can save every individual message by putting this function on
`erc-insert-post-hook'."
  (interactive)
  (or buffer (setq buffer (current-buffer)))
  (when (erc-logging-enabled buffer)
    (let ((file (erc-current-logfile buffer))
	  (coding-system erc-log-file-coding-system)
	  (inhibit-clash-detection t))	; needed for XEmacs
      (save-excursion
	(with-current-buffer buffer
	  (save-restriction
	    (widen)
	    ;; early on in the initialization, don't try and write the log out
	    (when (and (markerp erc-last-saved-position)
		       (> erc-insert-marker (1+ erc-last-saved-position)))
	      (let ((start (1+ (marker-position erc-last-saved-position)))
		    (end (marker-position erc-insert-marker)))
		(if (functionp erc-log-filter-function)
		    (let ((text (buffer-substring start end)))
		      (with-temp-buffer
			(insert (funcall erc-log-filter-function text))
			(let ((coding-system-for-write coding-system))
			  (write-region (point-min) (point-max)
					file t 'nomessage))))
		  (let ((coding-system-for-write coding-system))
		    (write-region start end file t 'nomessage))))
	      (if (and erc-truncate-buffer-on-save (interactive-p))
		  (progn
		    (let ((inhibit-read-only t)) (erase-buffer))
		    (move-marker erc-last-saved-position (point-max))
		    (erc-display-prompt))
		(move-marker erc-last-saved-position
			     ;; If we place erc-last-saved-position at
			     ;; erc-insert-marker, because text gets
			     ;; inserted /before/ erc-insert-marker,
			     ;; the log file will not be saved
			     ;; (erc-last-saved-position will always
			     ;; be equal to erc-insert-marker).
			     (1- (marker-position erc-insert-marker)))))
	    (set-buffer-modified-p nil))))))
  t)

(provide 'erc-log)

;;; erc-log.el ends here
;;
;; Local Variables:
;; indent-tabs-mode: t
;; tab-width: 8
;; End:

;; arch-tag: 54072f99-9f0a-4846-8908-2ccde92221de