annotate src/m/alpha.h @ 25358:9747bbf3e480

Call change_frame_size and do_pending_window_change with new parameter. Remove conditional compilation on NO_PROMPT_IN_BUFFER. (get_next_display_element): Display \r as ^M. (minibuffer_scroll_overlap): Removed because not used anywhere. (unwind_redisplay): Return nil. (clear_garbaged_frames): New. (redisplay_internal): Use it. (echo_area_display): Ditto. (resize_mini_window): Mew. (display_echo_area_1): Use it to resize echo area window. (redisplay_internal): Use it to resize active mini-window. (echo_area_glyphs, echo_area_message, echo_area_glyphs_length, previous_echo_glyphs, previous_echo_area_message, previous_echo_area_glyphs_length): Removed. (Vmessage_stack, echo_area_buffer, echo_buffer, display_last_displayed_message_p, Vwith_echo_area_save_vector): New. (message2_nolog): Use set_message and clear_message. (message3): Rename parameter len to nbytes to make clear what it is. (message3_nolog): Ditto. Use set_message and clear_message. (update_echo_area): Rewritten. (with_echo_area_buffer): New. (with_echo_area_buffer_unwind_data, unwind_with_area_buffer): New. (setup_echo_area_for_printing): New. (display_echo_area, display_echo_area_1): New. (current_message, current_message_1): New. (push_message, restore_message, pop_message, check_message_stack): New. (truncate_echo_area): Rewritten. (truncate_message_1): New. (set_message, set_message_1, clear_message): New. (echo_area_display): Rewritten. (redisplay_internal): Check for needed echo area update differently. (redisplay_preserve_echo_area): Rewritten. (redisplay_window): Check for mini-window displaying echo area message differently. (syms_of_xdisp): Initialize Vmessage_stack and echo area buffers. Remove initialzation of removed variables. (init_xdisp): Remove references to removed variables.

/* machine description file For the alpha chip.
   Copyright (C) 1994, 1997 Free Software Foundation, Inc.

This file is part of GNU Emacs.

GNU Emacs is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 1, or (at your option)
any later version.

GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU Emacs; see the file COPYING.  If not, write to
the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA.  */


/* The following line tells the configuration script what sort of 
   operating system this machine is likely to run.
   USUAL-OPSYS="note"

NOTE-START
Use -opsystem=osf1
NOTE-END

*/

#define BITS_PER_LONG 64
#define BITS_PER_EMACS_INT 64

/* Define WORDS_BIG_ENDIAN iff lowest-numbered byte in a word
   is the most significant byte.  */

#undef WORDS_BIG_ENDIAN

/* Define NO_ARG_ARRAY if you cannot take the address of the first of a
 * group of arguments and treat it as an array of the arguments.  */

#define NO_ARG_ARRAY

/* Define WORD_MACHINE if addresses and such have
 * to be corrected before they can be used as byte counts.  */

/* #define WORD_MACHINE */

/* Now define a symbol for the cpu type, if your compiler
   does not define it automatically:
   Ones defined so far include vax, m68000, ns16000, pyramid,
   orion, tahoe, APOLLO and many others */

/* __alpha defined automatically */


/* Use type EMACS_INT rather than a union, to represent Lisp_Object */
/* This is desirable for most machines.  */

#define NO_UNION_TYPE

/* Define the type to use.  */
#define EMACS_INT long
#define EMACS_UINT unsigned long
#define SPECIAL_EMACS_INT

/* Define EXPLICIT_SIGN_EXTEND if XINT must explicitly sign-extend
   the 24-bit bit field into an int.  In other words, if bit fields
   are always unsigned.

   If you use NO_UNION_TYPE, this flag does not matter.  */

#define EXPLICIT_SIGN_EXTEND

/* Data type of load average, as read out of kmem.  */

#define LOAD_AVE_TYPE long

/* Convert that into an integer that is 100 for a load average of 1.0  */

#define LOAD_AVE_CVT(x) (int) (((double) (x)) * 100.0 / FSCALE)

/* Define CANNOT_DUMP on machines where unexec does not work.
   Then the function dump-emacs will not be defined
   and temacs will do (load "loadup") automatically unless told otherwise.  */

/* #define CANNOT_DUMP */

/* Define VIRT_ADDR_VARIES if the virtual addresses of
   pure and impure space as loaded can vary, and even their
   relative order cannot be relied on.

   Otherwise Emacs assumes that text space precedes data space,
   numerically.  */

/* #define VIRT_ADDR_VARIES */

/* Define C_ALLOCA if this machine does not support a true alloca
   and the one written in C should be used instead.
   Define HAVE_ALLOCA to say that the system provides a properly
   working alloca function and it should be used.
   Define neither one if an assembler-language alloca
   in the file alloca.s should be used.  */

#define HAVE_ALLOCA

/* GNU malloc and the relocating allocator do not work together
   with X.   [Who wrote that?]  */

/* May 1995: reportedly [Rainer Schoepf <[e-mail]>] both the
   system and the gnu malloc system work with "alpha-dec-osf3.0" and
   "alpha-dec-osf3.2".  */

/* May 1995: it seems to me [Morten Welinder <[e-mail]>] that both
   mallocs work with "alpha-dec-osf2.0", but I daren't break anything
   right now.  Feel free to play if you want.  */

/* #define SYSTEM_MALLOC */

/* Define NO_REMAP if memory segmentation makes it not work well
   to change the boundary between the text section and data section
   when Emacs is dumped.  If you define this, the preloaded Lisp
   code will not be sharable; but that's better than failing completely.  */

#define NO_REMAP

/* Some really obscure 4.2-based systems (like Sequent DYNIX)
 * do not support asynchronous I/O (using SIGIO) on sockets,
 * even though it works fine on tty's.  If you have one of
 * these systems, define the following, and then use it in
 * config.h (or elsewhere) to decide when (not) to use SIGIO.
 *
 * You'd think this would go in an operating-system description file,
 * but since it only occurs on some, but not all, BSD systems, the
 * reasonable place to select for it is in the machine description
 * file.
 */

/* #define NO_SOCK_SIGIO */


#ifdef __ELF__
/* With ELF, make sure that all common symbols get allocated to in the
   data section.  Otherwise, the dump of temacs may miss variables in
   the shared library that have been initialized.  For example, with
   GNU libc, __malloc_initialized would normally be resolved to the
   shared library's .bss section, which is fatal.  */
# ifdef __GNUC__
#  define C_SWITCH_MACHINE	-fno-common
# else
#  error What gives?  Fix me if DEC Unix supports ELF now.
# endif
#endif

#if defined(__NetBSD__) || defined(__OpenBSD__)
#define ORDINARY_LINK
#endif

#ifdef __ELF__
#undef UNEXEC
#define UNEXEC unexelf.o
#endif

#ifndef __ELF__

/* Describe layout of the address space in an executing process.  */

#define TEXT_START    0x120000000
#define DATA_START    0x140000000

/* This is necessary for mem-limits.h, so that start_of_data gives
   the correct value */

#define DATA_SEG_BITS 0x140000000

/* The program to be used for unexec. */

#define UNEXEC unexalpha.o

#endif /* notdef __ELF__ */

#ifdef OSF1
#define ORDINARY_LINK

/* Some systems seem to have this, others don't.  */
#ifdef HAVE_LIBDNET
#define LIBS_MACHINE -ldnet
#else
#define LIBS_MACHINE -ldnet_stub
#endif
#endif /* OSF1 */

#if 0 /* Rainer Schoepf <[e-mail]> says this loses with X11R6
	 since it has only shared libraries.  */
#ifndef __GNUC__
/* This apparently is for the system ld as opposed to Gnu ld.  */
#ifdef OSF1
#define LD_SWITCH_MACHINE      -non_shared
#endif
#endif
#endif /* 0 */

#ifdef OSF1
#define LIBS_DEBUG
#define START_FILES pre-crt0.o
#endif

#if defined (LINUX) && __GNU_LIBRARY__ - 0 < 6
/* This controls a conditional in main.  */
#define LINUX_SBRK_BUG
#endif


#define PNTR_COMPARISON_TYPE unsigned long

/* On the 64 bit architecture, we can use 60 bits for addresses */

#define VALBITS         60


/* This definition of MARKBIT is necessary because of the comparison of
   ARRAY_MARK_FLAG and MARKBIT in an #if in lisp.h, which cpp doesn't like. */

#define MARKBIT         0x8000000000000000L


/* Define XINT and XUINT so that they can take arguments of type int */

#define XINT(a)  (((long) (a) << (BITS_PER_LONG - VALBITS)) >> (BITS_PER_LONG - VALBITS))
#define XUINT(a) ((long) (a) & VALMASK)

/* Define XPNTR to avoid or'ing with DATA_SEG_BITS */

#define XPNTR(a) XUINT (a)

/* Declare malloc and realloc in a way that is clean.
   But not in makefiles!  */

#ifndef NOT_C_CODE
/* We need these because pointers are larger than the default ints.  */
#if !defined(__NetBSD__) && !defined(__OpenBSD__)
#include <alloca.h>
#else
#include <stdlib.h>
#endif

/* Hack alert!  For reasons unknown to mankind the string.h file insists
   on defining bcopy etc. as taking char pointers as arguments.  With
   Emacs this produces an endless amount of warning which are harmless,
   but tends to flood the real errors.  This hack works around this problem
   by not prototyping.  */
#define bcopy string_h_bcopy
#define bzero string_h_bzero
#define bcmp  string_h_bcmp
#include <string.h>
#undef bcopy
#undef bzero
#undef bcmp

/* We need to prototype these for the lib-src programs even if we don't
   use the system malloc for the Emacs proper.  */
#ifdef _MALLOC_INTERNAL
/* These declarations are designed to match the ones in gmalloc.c.  */
#if defined (__STDC__) && __STDC__
extern void *malloc (), *realloc (), *calloc ();
#else
extern char *malloc (), *realloc (), *calloc ();
#endif
#else /* not _MALLOC_INTERNAL */
extern void *malloc (), *realloc (), *calloc ();
#endif /* not _MALLOC_INTERNAL */


extern long *xmalloc (), *xrealloc ();

#ifdef REL_ALLOC
#ifndef _MALLOC_INTERNAL
/* "char *" because ralloc.c defines it that way.  gmalloc.c thinks it
   is allowed to prototype these as "void *" so we don't prototype in
   that case.  You're right: it stinks!  */
extern char *r_alloc (), *r_re_alloc ();
extern void r_alloc_free ();
#endif /* not _MALLOC_INTERNAL */
#endif /* REL_ALLOC */

#endif /* not NOT_C_CODE */

#ifdef OSF1
#define PTY_ITERATION		for (i = 0; i < 1; i++) /* ick */
#define PTY_NAME_SPRINTF	/* none */
#define PTY_TTY_NAME_SPRINTF	/* none */
#define PTY_OPEN					\
  do							\
    {							\
      int dummy;					\
      SIGMASKTYPE mask;					\
      mask = sigblock (sigmask (SIGCHLD));		\
      if (-1 == openpty (&fd, &dummy, pty_name, 0, 0))	\
	fd = -1;					\
      sigsetmask (mask);				\
      close (dummy);					\
    }							\
  while (0)
#endif

/* On the Alpha it's best to avoid including TERMIO since struct
   termio and struct termios are mutually incompatible.  */
#define NO_TERMIO

#if defined (LINUX) || defined (__NetBSD__) || defined (__OpenBSD__)
# define TEXT_END ({ extern int _etext; &_etext; })
# ifndef __ELF__
#  define COFF
#  define DATA_END ({ extern int _EDATA; &_EDATA; })
# endif /* notdef __ELF__ */
#endif

#if (defined (__NetBSD__) || defined (__OpenBSD__)) && defined (__ELF__)
#define HAVE_TEXT_START
#endif

/* Many Alpha implementations (e.g. gas 2.8) can't handle DBL_MIN:
   they generate code that uses a signaling NaN instead of DBL_MIN.
   Define DBL_MIN_REPLACEMENT to be the next value larger than DBL_MIN:
   this avoids the assembler bug.  */
#define DBL_MIN_REPLACEMENT 2.2250738585072019e-308