277
|
1 /* Display generation from window structure and buffer text.
|
|
2 Copyright (C) 1985, 1986, 1987, 1988 Free Software Foundation, Inc.
|
|
3
|
|
4 This file is part of GNU Emacs.
|
|
5
|
|
6 GNU Emacs is free software; you can redistribute it and/or modify
|
|
7 it under the terms of the GNU General Public License as published by
|
|
8 the Free Software Foundation; either version 1, or (at your option)
|
|
9 any later version.
|
|
10
|
|
11 GNU Emacs is distributed in the hope that it will be useful,
|
|
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
14 GNU General Public License for more details.
|
|
15
|
|
16 You should have received a copy of the GNU General Public License
|
|
17 along with GNU Emacs; see the file COPYING. If not, write to
|
|
18 the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
|
|
19
|
|
20
|
|
21 #include "config.h"
|
|
22 #include <stdio.h>
|
|
23 /*#include <ctype.h>*/
|
|
24 #undef NULL
|
|
25 #include "lisp.h"
|
|
26 #include "screen.h"
|
|
27 #include "window.h"
|
|
28 #include "termchar.h"
|
|
29 #include "dispextern.h"
|
|
30 #include "buffer.h"
|
|
31 #include "indent.h"
|
|
32 #include "commands.h"
|
|
33 #include "macros.h"
|
|
34 #include "disptab.h"
|
|
35
|
|
36 extern int interrupt_input;
|
|
37 extern int command_loop_level;
|
|
38
|
|
39 /* Nonzero means print newline before next minibuffer message. */
|
|
40
|
|
41 int noninteractive_need_newline;
|
|
42
|
|
43 #define min(a, b) ((a) < (b) ? (a) : (b))
|
|
44 #define max(a, b) ((a) > (b) ? (a) : (b))
|
|
45
|
|
46 /* The buffer position of the first character appearing
|
|
47 entirely or partially on the current screen line.
|
|
48 Or zero, which disables the optimization for the current screen line. */
|
|
49 static int this_line_bufpos;
|
|
50
|
|
51 /* Number of characters past the end of this line,
|
|
52 including the terminating newline */
|
|
53 static int this_line_endpos;
|
|
54
|
|
55 /* The vertical position of this screen line. */
|
|
56 static int this_line_vpos;
|
|
57
|
|
58 /* Hpos value for start of display on this screen line.
|
|
59 Usually zero, but negative if first character really began
|
|
60 on previous line */
|
|
61 static int this_line_start_hpos;
|
|
62
|
|
63 /* Buffer that this_line variables are describing. */
|
|
64 static struct buffer *this_line_buffer;
|
|
65
|
|
66 /* Set by try_window_id to the vpos of first of any lines
|
|
67 scrolled on to the bottom of the screen. These lines should
|
|
68 not be included in any general scroll computation. */
|
|
69 static int scroll_bottom_vpos;
|
|
70
|
|
71 /* Value of echo_area_glyphs when it was last acted on.
|
|
72 If this is nonzero, there is a message on the screen
|
|
73 in the minibuffer and it should be erased as soon
|
|
74 as it is no longer requested to appear. */
|
|
75 char *previous_echo_glyphs;
|
|
76
|
|
77 /* Nonzero means truncate lines in all windows less wide than the screen */
|
|
78 int truncate_partial_width_windows;
|
|
79
|
|
80 Lisp_Object Vglobal_mode_string;
|
|
81
|
|
82 /* Marker for where to display an arrow on top of the buffer text. */
|
|
83 Lisp_Object Voverlay_arrow_position;
|
|
84
|
|
85 /* String to display for the arrow. */
|
|
86 Lisp_Object Voverlay_arrow_string;
|
|
87
|
|
88 /* Values of those variables at last redisplay. */
|
|
89 Lisp_Object last_arrow_position, last_arrow_string;
|
|
90
|
|
91 /* Nonzero if overlay arrow has been displayed once in this window. */
|
|
92 static int overlay_arrow_seen;
|
|
93
|
|
94 /* If cursor motion alone moves point off screen,
|
|
95 Try scrolling this many lines up or down if that will bring it back. */
|
|
96 int scroll_step;
|
|
97
|
|
98 /* Nonzero if try_window_id has made blank lines at window bottom
|
|
99 since the last redisplay that paused */
|
|
100 static int blank_end_of_window;
|
|
101
|
|
102 /* Number of windows showing the buffer of the selected window.
|
|
103 keyboard.c refers to this. */
|
|
104 int buffer_shared;
|
|
105
|
|
106 /* display_text_line sets these to the screen position (origin 0) of point,
|
|
107 whether the window is selected or not.
|
|
108 Set one to -1 first to determine whether point was found afterwards. */
|
|
109
|
|
110 static int cursor_vpos;
|
|
111 static int cursor_hpos;
|
|
112
|
|
113 int debug_end_pos;
|
|
114
|
|
115 /* Nonzero means display mode line highlighted */
|
|
116 int mode_line_inverse_video;
|
|
117
|
|
118 static void echo_area_display ();
|
|
119 void mark_window_display_accurate ();
|
|
120 static void redisplay_windows ();
|
|
121 static void redisplay_window ();
|
|
122 static void try_window ();
|
|
123 static int try_window_id ();
|
|
124 static struct position *display_text_line ();
|
|
125 static void display_mode_line ();
|
|
126 static int display_mode_element ();
|
|
127 static char *fmodetrunc ();
|
|
128 static char *decode_mode_spec ();
|
|
129 static int display_string ();
|
|
130
|
|
131 /* Prompt to display in front of the minibuffer contents */
|
|
132 char *minibuf_prompt;
|
|
133
|
|
134 /* Width in columns of current minibuffer prompt. */
|
|
135 int minibuf_prompt_width;
|
|
136
|
|
137 /* Message to display instead of minibuffer contents
|
|
138 This is what the functions error and message make,
|
|
139 and command echoing uses it as well.
|
|
140 It overrides the minibuf_prompt as well as the buffer. */
|
|
141 char *echo_area_glyphs;
|
|
142
|
|
143 /* true iff we should redraw the mode lines on the next redisplay */
|
|
144 int update_mode_lines;
|
|
145
|
|
146 /* Smallest number of characters before the gap
|
|
147 at any time since last redisplay that finished.
|
|
148 Valid for current buffer when try_window_id can be called. */
|
|
149 int beg_unchanged;
|
|
150
|
|
151 /* Smallest number of characters after the gap
|
|
152 at any time since last redisplay that finished.
|
|
153 Valid for current buffer when try_window_id can be called. */
|
|
154 int end_unchanged;
|
|
155
|
|
156 /* MODIFF as of last redisplay that finished;
|
|
157 if it matches MODIFF, beg_unchanged and end_unchanged
|
|
158 contain no useful information */
|
|
159 int unchanged_modified;
|
|
160
|
|
161 /* Nonzero if head_clip or tail_clip of current buffer has changed
|
|
162 since last redisplay that finished */
|
|
163 int clip_changed;
|
|
164
|
|
165 /* Nonzero if window sizes or contents have changed
|
|
166 since last redisplay that finished */
|
|
167 int windows_or_buffers_changed;
|
|
168
|
|
169
|
|
170 #ifndef MULTI_SCREEN
|
|
171
|
|
172 DEFUN ("redraw-display", Fredraw_display, Sredraw_display, 0, 0, "",
|
|
173 "Clear the screen and output again what is supposed to appear on it.")
|
|
174 ()
|
|
175 {
|
|
176 if (screen_height == 0) abort (); /* Some bug zeros some core */
|
|
177 clear_screen ();
|
|
178 fflush (stdout);
|
|
179 clear_screen_records ();
|
|
180 if (screen_height == 0) abort (); /* Some bug zeros some core */
|
|
181 windows_or_buffers_changed++;
|
|
182 /* Mark all windows as INaccurate,
|
|
183 so that every window will have its redisplay done. */
|
|
184 mark_window_display_accurate (XWINDOW (minibuf_window)->prev, 0);
|
|
185 if (screen_height == 0) abort (); /* Some bug zeros some core */
|
|
186 return Qnil;
|
|
187 }
|
|
188
|
|
189 #endif /* not MULTI_SCREEN */
|
|
190
|
|
191 char *message_buf;
|
|
192
|
|
193 /* dump an informative message to the minibuf */
|
|
194 /* VARARGS 1 */
|
|
195
|
|
196 void
|
|
197 message (m, a1, a2, a3)
|
|
198 char *m;
|
|
199 {
|
|
200 if (noninteractive)
|
|
201 {
|
|
202 if (noninteractive_need_newline)
|
|
203 putc ('\n', stderr);
|
|
204 noninteractive_need_newline = 0;
|
|
205 fprintf (stderr, m, a1, a2, a3);
|
|
206 fprintf (stderr, "\n");
|
|
207 fflush (stderr);
|
|
208 }
|
|
209 else if (INTERACTIVE)
|
|
210 {
|
|
211 #ifdef NO_ARG_ARRAY
|
|
212 int a[3];
|
|
213 a[0] = a1;
|
|
214 a[1] = a2;
|
|
215 a[2] = a3;
|
|
216
|
|
217 doprnt (SCREEN_MESSAGE_BUF (selected_screen),
|
|
218 SCREEN_WIDTH (selected_screen), m, 0, 3, a);
|
|
219 #else
|
|
220 doprnt (SCREEN_MESSAGE_BUF (selected_screen),
|
|
221 SCREEN_WIDTH (selected_screen), m, 0, 3, &a1);
|
|
222 #endif /* NO_ARG_ARRAY */
|
|
223
|
|
224 echo_area_glyphs = SCREEN_MESSAGE_BUF (selected_screen);
|
|
225 do_pending_window_change ();
|
|
226 echo_area_display ();
|
|
227 update_screen (XSCREEN (XWINDOW (minibuf_window)->screen), 1, 1);
|
|
228 do_pending_window_change ();
|
|
229 }
|
|
230 }
|
|
231
|
|
232 /* Specify m, a string, as a message in the minibuf. */
|
|
233 void
|
|
234 message1 (m)
|
|
235 char *m;
|
|
236 {
|
|
237 if (!NULL (Vwindow_system) && SCREEN_IS_TERMCAP (selected_screen))
|
|
238 return;
|
|
239
|
|
240 if (noninteractive)
|
|
241 {
|
|
242 if (noninteractive_need_newline)
|
|
243 putc ('\n', stderr);
|
|
244 noninteractive_need_newline = 0;
|
|
245 fprintf (stderr, "%s\n", m);
|
|
246 fflush (stderr);
|
|
247 }
|
|
248 else if (INTERACTIVE)
|
|
249 {
|
|
250 echo_area_glyphs = m;
|
|
251 do_pending_window_change ();
|
|
252 echo_area_display ();
|
|
253 update_screen (XSCREEN (XWINDOW (minibuf_window)->screen), 1, 1);
|
|
254 do_pending_window_change ();
|
|
255 }
|
|
256 }
|
|
257
|
|
258 static void
|
|
259 echo_area_display ()
|
|
260 {
|
|
261 register int vpos;
|
|
262 SCREEN_PTR s;
|
|
263
|
|
264 #ifdef MULTI_SCREEN
|
|
265 choose_minibuf_screen ();
|
|
266 s = XSCREEN (XWINDOW (minibuf_window)->screen);
|
|
267
|
|
268 if (!s->visible)
|
|
269 return;
|
|
270 #endif
|
|
271
|
|
272 if (screen_garbaged)
|
|
273 {
|
|
274 Fredraw_display ();
|
|
275 screen_garbaged = 0;
|
|
276 }
|
|
277
|
|
278 if (echo_area_glyphs || minibuf_level == 0)
|
|
279 {
|
|
280 vpos = XFASTINT (XWINDOW (minibuf_window)->top);
|
|
281 get_display_line (s, vpos, 0);
|
|
282 display_string (XWINDOW (minibuf_window), vpos,
|
|
283 echo_area_glyphs ? echo_area_glyphs : "",
|
|
284 0, 0, 0, SCREEN_WIDTH (s));
|
|
285
|
|
286 /* If desired cursor location is on this line, put it at end of text */
|
|
287 if (SCREEN_CURSOR_Y (s) == vpos)
|
|
288 SCREEN_CURSOR_X (s) = s->desired_glyphs->used[vpos];
|
|
289 }
|
|
290 else if (!EQ (minibuf_window, selected_window))
|
|
291 windows_or_buffers_changed++;
|
|
292
|
|
293 if (EQ (minibuf_window, selected_window))
|
|
294 this_line_bufpos = 0;
|
|
295
|
|
296 previous_echo_glyphs = echo_area_glyphs;
|
|
297 }
|
|
298
|
|
299 /* Do a screen update, taking possible shortcuts into account.
|
|
300 This is the main external entry point for redisplay.
|
|
301
|
|
302 If the last redisplay displayed an echo area message and that
|
|
303 message is no longer requested, we clear the echo area
|
|
304 or bring back the minibuffer if that is in use.
|
|
305
|
|
306 Everyone would like to have a hook here to call eval,
|
|
307 but that cannot be done safely without a lot of changes elsewhere.
|
|
308 This can be called from signal handlers; with alarms set up;
|
|
309 or with synchronous processes running.
|
|
310 See the function `echo' in keyboard.c.
|
|
311 See Fcall_process; if you called it from here, it could be
|
|
312 entered recursively. */
|
|
313
|
|
314 void
|
|
315 redisplay ()
|
|
316 {
|
|
317 register struct window *w = XWINDOW (selected_window);
|
|
318 register int pause;
|
|
319 int must_finish = 0;
|
|
320 int all_windows;
|
|
321 register int tlbufpos, tlendpos;
|
|
322 struct position pos;
|
|
323 extern int input_pending;
|
|
324
|
|
325 if (noninteractive)
|
|
326 return;
|
|
327
|
|
328 /* Notice any pending interrupt request to change screen size. */
|
|
329 do_pending_window_change ();
|
|
330
|
|
331 if (screen_garbaged)
|
|
332 {
|
|
333 Fredraw_display ();
|
|
334 screen_garbaged = 0;
|
|
335 }
|
|
336
|
|
337 if (echo_area_glyphs || previous_echo_glyphs)
|
|
338 {
|
|
339 echo_area_display ();
|
|
340 must_finish = 1;
|
|
341 }
|
|
342
|
|
343 if (clip_changed || windows_or_buffers_changed)
|
|
344 update_mode_lines++;
|
|
345
|
|
346 /* Detect case that we need to write a star in the mode line. */
|
|
347 if (XFASTINT (w->last_modified) < MODIFF
|
|
348 && XFASTINT (w->last_modified) <= current_buffer->save_modified)
|
|
349 {
|
|
350 w->update_mode_line = Qt;
|
|
351 if (buffer_shared > 1)
|
|
352 update_mode_lines++;
|
|
353 }
|
|
354
|
|
355 SCREEN_SCROLL_BOTTOM_VPOS (XSCREEN (w->screen)) = -1;
|
|
356
|
|
357 all_windows = update_mode_lines || buffer_shared > 1;
|
|
358 #ifdef MULTI_SCREEN
|
|
359 all_windows |= (XTYPE (Vglobal_minibuffer_screen) == Lisp_Screen
|
|
360 && selected_screen != XSCREEN (Vglobal_minibuffer_screen));
|
|
361 #endif /* MULTI_SCREEN */
|
|
362
|
|
363 /* If specs for an arrow have changed, do thorough redisplay
|
|
364 to ensure we remove any arrow that should no longer exist. */
|
|
365 if (Voverlay_arrow_position != last_arrow_position
|
|
366 || Voverlay_arrow_string != last_arrow_string)
|
|
367 all_windows = 1, clip_changed = 1;
|
|
368
|
|
369 tlbufpos = this_line_bufpos;
|
|
370 tlendpos = this_line_endpos;
|
|
371 if (!all_windows && tlbufpos > 0 && NULL (w->update_mode_line)
|
|
372 && SCREEN_VISIBLE_P (XSCREEN (w->screen))
|
|
373 /* Make sure recorded data applies to current buffer, etc */
|
|
374 && this_line_buffer == current_buffer
|
|
375 && current_buffer == XBUFFER (w->buffer)
|
|
376 && NULL (w->force_start)
|
|
377 /* Point must be on the line that we have info recorded about */
|
|
378 && point >= tlbufpos
|
|
379 && point <= Z - tlendpos
|
|
380 /* All text outside that line, including its final newline,
|
|
381 must be unchanged */
|
|
382 && (XFASTINT (w->last_modified) >= MODIFF
|
|
383 || (beg_unchanged >= tlbufpos - 1
|
|
384 && GPT >= tlbufpos
|
|
385 && end_unchanged >= tlendpos
|
|
386 && Z - GPT >= tlendpos)))
|
|
387 {
|
|
388 if (tlbufpos > BEGV && FETCH_CHAR (tlbufpos - 1) != '\n'
|
|
389 && (tlbufpos == ZV
|
|
390 || FETCH_CHAR (tlbufpos) == '\n'))
|
|
391 /* Former continuation line has disappeared by becoming empty */
|
|
392 goto cancel;
|
|
393 else if (XFASTINT (w->last_modified) < MODIFF
|
|
394 || MINI_WINDOW_P (w))
|
|
395 {
|
|
396 cursor_vpos = -1;
|
|
397 overlay_arrow_seen = 0;
|
|
398 display_text_line (w, tlbufpos, this_line_vpos, this_line_start_hpos,
|
|
399 pos_tab_offset (w, tlbufpos));
|
|
400 /* If line contains point, is not continued,
|
|
401 and ends at same distance from eob as before, we win */
|
|
402 if (cursor_vpos >= 0 && this_line_bufpos
|
|
403 && this_line_endpos == tlendpos)
|
|
404 {
|
|
405 if (XFASTINT (w->width) != SCREEN_WIDTH (XSCREEN (WINDOW_SCREEN (w))))
|
|
406 preserve_other_columns (w);
|
|
407 goto update;
|
|
408 }
|
|
409 else
|
|
410 goto cancel;
|
|
411 }
|
|
412 else if (point == XFASTINT (w->last_point))
|
|
413 {
|
|
414 if (!must_finish)
|
|
415 {
|
|
416 do_pending_window_change ();
|
|
417 return;
|
|
418 }
|
|
419 goto update;
|
|
420 }
|
|
421 else
|
|
422 {
|
|
423 pos = *compute_motion (tlbufpos, 0,
|
|
424 XINT (w->hscroll) ? 1 - XINT (w->hscroll) : 0,
|
|
425 point, 2, - (1 << (SHORTBITS - 1)),
|
|
426 XFASTINT (w->width) - 1
|
|
427 - (XFASTINT (w->width) + XFASTINT (w->left)
|
|
428 != SCREEN_WIDTH (selected_screen)),
|
|
429 XINT (w->hscroll), 0);
|
|
430 if (pos.vpos < 1)
|
|
431 {
|
|
432 SCREEN_CURSOR_X (selected_screen)
|
|
433 = XFASTINT (w->left) + max (pos.hpos, 0);
|
|
434 SCREEN_CURSOR_Y (selected_screen) = this_line_vpos;
|
|
435 goto update;
|
|
436 }
|
|
437 else
|
|
438 goto cancel;
|
|
439 }
|
|
440 cancel:
|
|
441 /* Text changed drastically or point moved off of line */
|
|
442 cancel_line (this_line_vpos, selected_screen);
|
|
443 }
|
|
444
|
|
445 this_line_bufpos = 0;
|
|
446 all_windows |= buffer_shared > 1;
|
|
447
|
|
448 if (all_windows)
|
|
449 {
|
|
450 #ifdef MULTI_SCREEN
|
|
451 Lisp_Object tail;
|
|
452
|
|
453 /* Recompute # windows showing selected buffer.
|
|
454 This will be increment each time such a window is displayed. */
|
|
455 buffer_shared = 0;
|
|
456
|
|
457 for (tail = Vscreen_list; CONSP (tail); tail = XCONS (tail)->cdr)
|
|
458 {
|
|
459 SCREEN_PTR s;
|
|
460
|
|
461 if (XTYPE (XCONS (tail)->car) != Lisp_Screen)
|
|
462 continue;
|
|
463
|
|
464 s = XSCREEN (XCONS (tail)->car);
|
|
465 if (s->visible)
|
|
466 {
|
|
467
|
|
468 /* Clear the echo area on screens where the minibuffer isn't. */
|
|
469 if (s != XSCREEN (XWINDOW (minibuf_window)->screen)
|
|
470 /* But only screens that have minibuffers. */
|
|
471 && s->has_minibuffer)
|
|
472 {
|
|
473 int vpos = XFASTINT (XWINDOW (s->minibuffer_window)->top);
|
|
474 register struct screen_glyphs *line;
|
|
475
|
|
476 get_display_line (s, vpos, 0);
|
|
477 display_string (XWINDOW (s->minibuffer_window), vpos, "",
|
|
478 0, 0, 0, s->width);
|
|
479 }
|
|
480
|
|
481 /* Redraw its windows. */
|
|
482 redisplay_windows (SCREEN_ROOT_WINDOW (s));
|
|
483 }
|
|
484 }
|
|
485 #else
|
|
486 redisplay_windows (SCREEN_ROOT_WINDOW (s));
|
|
487 #endif /* not MULTI_SCREEN */
|
|
488 }
|
|
489 else if (SCREEN_VISIBLE_P (selected_screen))
|
|
490 {
|
|
491 redisplay_window (selected_window, 1);
|
|
492 if (XFASTINT (w->width) != SCREEN_WIDTH (selected_screen))
|
|
493 preserve_other_columns (w);
|
|
494 }
|
|
495
|
|
496 update:
|
|
497 /* Prevent various kinds of signals during display update.
|
|
498 stdio is not robust about handling signals,
|
|
499 which can cause an apparent I/O error. */
|
|
500 if (interrupt_input)
|
|
501 unrequest_sigio ();
|
|
502 stop_polling ();
|
|
503
|
|
504 #ifdef MULTI_SCREEN
|
|
505 if (all_windows)
|
|
506 {
|
|
507 Lisp_Object tail;
|
|
508
|
|
509 pause = 0;
|
|
510
|
|
511 for (tail = Vscreen_list; CONSP (tail); tail = XCONS (tail)->cdr)
|
|
512 {
|
|
513 SCREEN_PTR s;
|
|
514
|
|
515 if (XTYPE (XCONS (tail)->car) != Lisp_Screen)
|
|
516 continue;
|
|
517
|
|
518 s = XSCREEN (XCONS (tail)->car);
|
|
519 if (s->visible)
|
|
520 {
|
|
521 pause |= update_screen (s, 0, 0, SCREEN_SCROLL_BOTTOM_VPOS (s));
|
|
522 if (!pause)
|
|
523 mark_window_display_accurate (s->root_window, 1);
|
|
524 }
|
|
525 }
|
|
526 }
|
|
527 else
|
|
528 #endif /* MULTI_SCREEN */
|
|
529 if (SCREEN_VISIBLE_P (selected_screen))
|
|
530 pause = update_screen (selected_screen, 0, 0);
|
|
531
|
|
532 /* If screen does not match, prevent doing single-line-update next time.
|
|
533 Also, don't forget to check every line to update the arrow. */
|
|
534 if (pause)
|
|
535 {
|
|
536 this_line_bufpos = 0;
|
|
537 if (!NULL (last_arrow_position))
|
|
538 {
|
|
539 last_arrow_position = Qt;
|
|
540 last_arrow_string = Qt;
|
|
541 }
|
|
542 /* If we pause after scrolling, some lines in current_screen
|
|
543 may be null, so preserve_other_columns won't be able to
|
|
544 preserve all the vertical-bar separators. So, avoid using it
|
|
545 in that case. */
|
|
546 if (XFASTINT (w->width) != SCREEN_WIDTH (selected_screen))
|
|
547 update_mode_lines = 1;
|
|
548 }
|
|
549
|
|
550 /* Now text on screen agrees with windows, so
|
|
551 put info into the windows for partial redisplay to follow */
|
|
552
|
|
553 if (!pause)
|
|
554 {
|
|
555 register struct buffer *b = XBUFFER (w->buffer);
|
|
556
|
|
557 blank_end_of_window = 0;
|
|
558 clip_changed = 0;
|
|
559 unchanged_modified = BUF_MODIFF (b);
|
|
560 beg_unchanged = BUF_GPT (b) - BUF_BEG (b);
|
|
561 end_unchanged = BUF_Z (b) - BUF_GPT (b);
|
|
562
|
|
563 XFASTINT (w->last_point) = BUF_PT (b);
|
|
564 XFASTINT (w->last_point_x) = SCREEN_CURSOR_X (selected_screen);
|
|
565 XFASTINT (w->last_point_y) = SCREEN_CURSOR_Y (selected_screen);
|
|
566
|
|
567 if (all_windows)
|
|
568 mark_window_display_accurate (XWINDOW (minibuf_window)->prev, 1);
|
|
569 else
|
|
570 {
|
|
571 w->update_mode_line = Qnil;
|
|
572 XFASTINT (w->last_modified) = BUF_MODIFF (b);
|
|
573 w->window_end_valid = Qt;
|
|
574 last_arrow_position = Voverlay_arrow_position;
|
|
575 last_arrow_string = Voverlay_arrow_string;
|
|
576 }
|
|
577 update_mode_lines = 0;
|
|
578 windows_or_buffers_changed = 0;
|
|
579 }
|
|
580
|
|
581 /* Start SIGIO interrupts coming again.
|
|
582 Having them off during the code above
|
|
583 makes it less likely one will discard output,
|
|
584 but not impossible, since there might be stuff
|
|
585 in the system buffer here.
|
|
586 But it is much hairier to try to do anything about that. */
|
|
587
|
|
588 if (interrupt_input)
|
|
589 request_sigio ();
|
|
590 start_polling ();
|
|
591
|
|
592 /* Change screen size now if a change is pending. */
|
|
593 do_pending_window_change ();
|
|
594 }
|
|
595
|
|
596 /* Redisplay, but leave alone any recent echo area message
|
|
597 unless another message has been requested in its place.
|
|
598
|
|
599 This is useful in situations where you need to redisplay but no
|
|
600 user action has occurred, making it inappropriate for the message
|
|
601 area to be cleared. See tracking_off and
|
|
602 wait_reading_process_input for examples of these situations. */
|
|
603
|
|
604 redisplay_preserve_echo_area ()
|
|
605 {
|
|
606 if (echo_area_glyphs == 0 && previous_echo_glyphs != 0)
|
|
607 {
|
|
608 echo_area_glyphs = previous_echo_glyphs;
|
|
609 redisplay ();
|
|
610 echo_area_glyphs = 0;
|
|
611 }
|
|
612 else
|
|
613 redisplay ();
|
|
614 }
|
|
615
|
|
616 void
|
|
617 mark_window_display_accurate (window, flag)
|
|
618 Lisp_Object window;
|
|
619 int flag;
|
|
620 {
|
|
621 register struct window *w;
|
|
622
|
|
623 for (;!NULL (window); window = w->next)
|
|
624 {
|
|
625 w = XWINDOW (window);
|
|
626
|
|
627 if (!NULL (w->buffer))
|
|
628 XFASTINT (w->last_modified)
|
|
629 = !flag ? 0
|
|
630 : XBUFFER (w->buffer) == current_buffer
|
|
631 ? MODIFF : BUF_MODIFF (XBUFFER (w->buffer));
|
|
632 w->window_end_valid = Qt;
|
|
633 w->update_mode_line = Qnil;
|
|
634
|
|
635 if (!NULL (w->vchild))
|
|
636 mark_window_display_accurate (w->vchild, flag);
|
|
637 if (!NULL (w->hchild))
|
|
638 mark_window_display_accurate (w->hchild, flag);
|
|
639 }
|
|
640
|
|
641 if (flag)
|
|
642 {
|
|
643 last_arrow_position = Voverlay_arrow_position;
|
|
644 last_arrow_string = Voverlay_arrow_string;
|
|
645 }
|
|
646 else
|
|
647 {
|
|
648 /* t is unequal to any useful value of Voverlay_arrow_... */
|
|
649 last_arrow_position = Qt;
|
|
650 last_arrow_string = Qt;
|
|
651 }
|
|
652 }
|
|
653
|
|
654 int do_id = 1;
|
|
655
|
|
656 static void
|
|
657 redisplay_windows (window)
|
|
658 Lisp_Object window;
|
|
659 {
|
|
660 for (; !NULL (window); window = XWINDOW (window)->next)
|
|
661 redisplay_window (window, 0);
|
|
662 }
|
|
663
|
|
664 static void
|
|
665 redisplay_window (window, just_this_one)
|
|
666 Lisp_Object window;
|
|
667 int just_this_one;
|
|
668 {
|
|
669 register struct window *w = XWINDOW (window);
|
|
670 SCREEN_PTR s = XSCREEN (w->screen);
|
|
671 int height;
|
|
672 register int lpoint = point;
|
|
673 struct buffer *old = current_buffer;
|
|
674 register int width = XFASTINT (w->width) - 1
|
|
675 - (XFASTINT (w->width) + XFASTINT (w->left)
|
|
676 != SCREEN_WIDTH (XSCREEN (WINDOW_SCREEN (w))));
|
|
677 register int startp;
|
|
678 register int hscroll = XINT (w->hscroll);
|
|
679 struct position pos;
|
|
680 int opoint;
|
|
681 int tem;
|
|
682 int window_needs_modeline;
|
|
683
|
|
684 if (SCREEN_HEIGHT (s) == 0) abort (); /* Some bug zeros some core */
|
|
685
|
|
686 /* If this is a combination window, do its children; that's all. */
|
|
687
|
|
688 if (!NULL (w->vchild))
|
|
689 {
|
|
690 redisplay_windows (w->vchild);
|
|
691 return;
|
|
692 }
|
|
693 if (!NULL (w->hchild))
|
|
694 {
|
|
695 redisplay_windows (w->hchild);
|
|
696 return;
|
|
697 }
|
|
698 if (NULL (w->buffer))
|
|
699 abort ();
|
|
700
|
|
701 if (update_mode_lines)
|
|
702 w->update_mode_line = Qt;
|
|
703
|
|
704 /* Otherwise set up data on this window; select its buffer and point value */
|
|
705
|
|
706 height = window_internal_height (w);
|
|
707
|
|
708 if (MINI_WINDOW_P (w)
|
|
709 && (echo_area_glyphs
|
|
710 /* Don't display minibuffers except minibuf_window. */
|
|
711 || w != XWINDOW (minibuf_window)))
|
|
712 return;
|
|
713
|
|
714 current_buffer = XBUFFER (w->buffer);
|
|
715 opoint = point;
|
|
716
|
|
717 /* Count number of windows showing the selected buffer. */
|
|
718
|
|
719 if (!just_this_one
|
|
720 && current_buffer == XBUFFER (XWINDOW (selected_window)->buffer))
|
|
721 buffer_shared++;
|
|
722
|
|
723 /* POINT refers normally to the selected window.
|
|
724 For any other window, set up appropriate value. */
|
|
725
|
|
726 if (!EQ (window, selected_window))
|
|
727 {
|
|
728 SET_PT (marker_position (w->pointm));
|
|
729 if (point < BEGV)
|
|
730 {
|
|
731 point = BEGV;
|
|
732 Fset_marker (w->pointm, make_number (point), Qnil);
|
|
733 }
|
|
734 else if (point > (ZV - 1))
|
|
735 {
|
|
736 point = ZV;
|
|
737 Fset_marker (w->pointm, make_number (point), Qnil);
|
|
738 }
|
|
739 }
|
|
740
|
|
741 /* If window-start is screwed up, choose a new one. */
|
|
742
|
|
743 if (XMARKER (w->start)->buffer != current_buffer)
|
|
744 goto recenter;
|
|
745
|
|
746 startp = marker_position (w->start);
|
|
747
|
|
748 /* Handle case where place to start displaying has been specified */
|
|
749
|
|
750 if (!NULL (w->force_start))
|
|
751 {
|
|
752 w->update_mode_line = Qt;
|
|
753 w->force_start = Qnil;
|
|
754 XFASTINT (w->last_modified) = 0;
|
|
755 try_window (window, startp);
|
|
756 if (cursor_vpos < 0)
|
|
757 {
|
|
758 /* If point does not appear, move point so it does appear */
|
|
759 pos = *compute_motion (startp, 0,
|
|
760 ((EQ (window, minibuf_window) && startp == 1)
|
|
761 ? minibuf_prompt_width : 0)
|
|
762 +
|
|
763 (hscroll ? 1 - hscroll : 0),
|
|
764 ZV, height / 2,
|
|
765 - (1 << (SHORTBITS - 1)),
|
|
766 width, hscroll, pos_tab_offset (w, startp));
|
|
767 SET_PT (pos.bufpos);
|
|
768 if (w != XWINDOW (SCREEN_SELECTED_WINDOW (s)))
|
|
769 Fset_marker (w->pointm, make_number (point), Qnil);
|
|
770 else
|
|
771 {
|
|
772 lpoint = point;
|
|
773 SCREEN_CURSOR_X (s) = max (0, pos.hpos) + XFASTINT (w->left);
|
|
774 SCREEN_CURSOR_Y (s) = pos.vpos + XFASTINT (w->top);
|
|
775 }
|
|
776 }
|
|
777 goto done;
|
|
778 }
|
|
779
|
|
780 /* Handle case where text has not changed, only point,
|
|
781 and it has not moved off the screen */
|
|
782
|
|
783 /* This code is not used for minibuffer for the sake of
|
|
784 the case of redisplaying to replace an echo area message;
|
|
785 since in that case the minibuffer contents per se are usually unchanged.
|
|
786 This code is of no real use in the minibuffer since
|
|
787 the handling of this_line_bufpos, etc.,
|
|
788 in redisplay handles the same cases. */
|
|
789
|
|
790 if (XFASTINT (w->last_modified) >= MODIFF
|
|
791 && point >= startp && !clip_changed
|
|
792 && (just_this_one || XFASTINT (w->width) == SCREEN_WIDTH (s))
|
|
793 && !EQ (window, minibuf_window))
|
|
794 {
|
|
795 pos = *compute_motion (startp, 0, (hscroll ? 1 - hscroll : 0),
|
|
796 point, height + 1, 10000, width, hscroll,
|
|
797 pos_tab_offset (w, startp));
|
|
798
|
|
799 if (pos.vpos < height)
|
|
800 {
|
|
801 /* Ok, point is still on screen */
|
|
802 if (w == XWINDOW (SCREEN_SELECTED_WINDOW (s)))
|
|
803 {
|
|
804 /* These variables are supposed to be origin 1 */
|
|
805 SCREEN_CURSOR_X (s) = max (0, pos.hpos) + XFASTINT (w->left);
|
|
806 SCREEN_CURSOR_Y (s) = pos.vpos + XFASTINT (w->top);
|
|
807 }
|
|
808 /* This doesn't do the trick, because if a window to the right of
|
|
809 this one must be redisplayed, this does nothing because there
|
|
810 is nothing in DesiredScreen yet, and then the other window is
|
|
811 redisplayed, making likes that are empty in this window's columns.
|
|
812 if (XFASTINT (w->width) != SCREEN_WIDTH (s))
|
|
813 preserve_my_columns (w);
|
|
814 */
|
|
815 goto done;
|
|
816 }
|
|
817 /* Don't bother trying redisplay with same start;
|
|
818 we already know it will lose */
|
|
819 }
|
|
820 /* If current starting point was originally the beginning of a line
|
|
821 but no longer is, find a new starting point. */
|
|
822 else if (!NULL (w->start_at_line_beg)
|
|
823 && !(startp == BEGV
|
|
824 || FETCH_CHAR (startp - 1) == '\n'))
|
|
825 {
|
|
826 goto recenter;
|
|
827 }
|
|
828 else if (just_this_one && !MINI_WINDOW_P (w)
|
|
829 && point >= startp
|
|
830 && XFASTINT (w->last_modified)
|
|
831 && ! EQ (w->window_end_valid, Qnil)
|
|
832 && do_id && !clip_changed
|
|
833 && !blank_end_of_window
|
|
834 && XFASTINT (w->width) == SCREEN_WIDTH (s)
|
|
835 && EQ (last_arrow_position, Voverlay_arrow_position)
|
|
836 && EQ (last_arrow_string, Voverlay_arrow_string)
|
|
837 && (tem = try_window_id (SCREEN_SELECTED_WINDOW (s)))
|
|
838 && tem != -2)
|
|
839 {
|
|
840 /* tem > 0 means success. tem == -1 means choose new start.
|
|
841 tem == -2 means try again with same start,
|
|
842 and nothing but whitespace follows the changed stuff.
|
|
843 tem == 0 means try again with same start. */
|
|
844 if (tem > 0)
|
|
845 goto done;
|
|
846 }
|
|
847 else if (startp >= BEGV && startp <= ZV
|
|
848 /* Avoid starting display at end of buffer! */
|
|
849 && (startp <= ZV || startp == BEGV
|
|
850 || (XFASTINT (w->last_modified) >= MODIFF)))
|
|
851 {
|
|
852 /* Try to redisplay starting at same place as before */
|
|
853 /* If point has not moved off screen, accept the results */
|
|
854 try_window (window, startp);
|
|
855 if (cursor_vpos >= 0)
|
|
856 goto done;
|
|
857 else
|
|
858 cancel_my_columns (w);
|
|
859 }
|
|
860
|
|
861 XFASTINT (w->last_modified) = 0;
|
|
862 w->update_mode_line = Qt;
|
|
863
|
|
864 /* Try to scroll by specified few lines */
|
|
865
|
|
866 if (scroll_step && !clip_changed)
|
|
867 {
|
|
868 if (point > startp)
|
|
869 {
|
|
870 pos = *vmotion (Z - XFASTINT (w->window_end_pos),
|
|
871 scroll_step, width, hscroll, window);
|
|
872 if (pos.vpos >= height)
|
|
873 goto scroll_fail;
|
|
874 }
|
|
875
|
|
876 pos = *vmotion (startp, point < startp ? - scroll_step : scroll_step,
|
|
877 width, hscroll, window);
|
|
878
|
|
879 if (point >= pos.bufpos)
|
|
880 {
|
|
881 try_window (window, pos.bufpos);
|
|
882 if (cursor_vpos >= 0)
|
|
883 goto done;
|
|
884 else
|
|
885 cancel_my_columns (w);
|
|
886 }
|
|
887 scroll_fail: ;
|
|
888 }
|
|
889
|
|
890 /* Finally, just choose place to start which centers point */
|
|
891
|
|
892 recenter:
|
|
893 pos = *vmotion (point, - height / 2, width, hscroll, window);
|
|
894 try_window (window, pos.bufpos);
|
|
895
|
|
896 startp = marker_position (w->start);
|
|
897 w->start_at_line_beg =
|
|
898 (startp == BEGV || FETCH_CHAR (startp - 1) == '\n') ? Qt : Qnil;
|
|
899
|
|
900 done:
|
|
901 /* If window not full width, must redo its mode line
|
|
902 if the window to its side is being redone */
|
|
903 if ((!NULL (w->update_mode_line)
|
|
904 || (!just_this_one && width < SCREEN_WIDTH (s) - 1))
|
|
905 && height != XFASTINT (w->height))
|
|
906 display_mode_line (w);
|
|
907
|
|
908 SET_PT (opoint);
|
|
909 current_buffer = old;
|
|
910 SET_PT (lpoint);
|
|
911 }
|
|
912
|
|
913 /* Do full redisplay on one window, starting at position `pos'. */
|
|
914
|
|
915 static void
|
|
916 try_window (window, pos)
|
|
917 Lisp_Object window;
|
|
918 register int pos;
|
|
919 {
|
|
920 register struct window *w = XWINDOW (window);
|
|
921 register int height = window_internal_height (w);
|
|
922 register int vpos = XFASTINT (w->top);
|
|
923 register int last_text_vpos = vpos;
|
|
924 int tab_offset = pos_tab_offset (w, pos);
|
|
925 SCREEN_PTR s = XSCREEN (w->screen);
|
|
926 int width = XFASTINT (w->width) - 1
|
|
927 - (XFASTINT (w->width) + XFASTINT (w->left) != SCREEN_WIDTH (s));
|
|
928 struct position val;
|
|
929
|
|
930 Fset_marker (w->start, make_number (pos), Qnil);
|
|
931 cursor_vpos = -1;
|
|
932 overlay_arrow_seen = 0;
|
|
933 val.hpos = XINT (w->hscroll) ? 1 - XINT (w->hscroll) : 0;
|
|
934
|
|
935 while (--height >= 0)
|
|
936 {
|
|
937 val = *display_text_line (w, pos, vpos, val.hpos, tab_offset);
|
|
938 tab_offset += width;
|
|
939 if (val.vpos) tab_offset = 0;
|
|
940 vpos++;
|
|
941 if (pos != val.bufpos)
|
|
942 last_text_vpos
|
|
943 /* Next line, unless prev line ended in end of buffer with no cr */
|
|
944 = vpos - (val.vpos && FETCH_CHAR (val.bufpos - 1) != '\n');
|
|
945 pos = val.bufpos;
|
|
946 }
|
|
947
|
|
948 /* If last line is continued in middle of character,
|
|
949 include the split character in the text considered on the screen */
|
|
950 if (val.hpos < (XINT (w->hscroll) ? 1 - XINT (w->hscroll) : 0))
|
|
951 pos++;
|
|
952
|
|
953 /* If bottom just moved off end of screen, change mode line percentage. */
|
|
954 if (XFASTINT (w->window_end_pos) == 0
|
|
955 && Z != pos)
|
|
956 w->update_mode_line = Qt;
|
|
957
|
|
958 /* Say where last char on screen will be, once redisplay is finished. */
|
|
959 XFASTINT (w->window_end_pos) = Z - pos;
|
|
960 XFASTINT (w->window_end_vpos) = last_text_vpos - XFASTINT (w->top);
|
|
961 /* But that is not valid info until redisplay finishes. */
|
|
962 w->window_end_valid = Qnil;
|
|
963 }
|
|
964
|
|
965 /* Try to redisplay when buffer is modified locally,
|
|
966 computing insert/delete line to preserve text outside
|
|
967 the bounds of the changes.
|
|
968 Return 1 if successful, 0 if if cannot tell what to do,
|
|
969 or -1 to tell caller to find a new window start,
|
|
970 or -2 to tell caller to do normal redisplay with same window start. */
|
|
971
|
|
972 static int
|
|
973 try_window_id (window)
|
|
974 Lisp_Object window;
|
|
975 {
|
|
976 int pos;
|
|
977 register struct window *w = XWINDOW (window);
|
|
978 register int height = window_internal_height (w);
|
|
979 SCREEN_PTR s = XSCREEN (w->screen);
|
|
980 int top = XFASTINT (w->top);
|
|
981 int start = marker_position (w->start);
|
|
982 int width = XFASTINT (w->width) - 1
|
|
983 - (XFASTINT (w->width) + XFASTINT (w->left) != SCREEN_WIDTH (s));
|
|
984 int hscroll = XINT (w->hscroll);
|
|
985 int lmargin = hscroll > 0 ? 1 - hscroll : 0;
|
|
986 register int vpos;
|
|
987 register int i, tem;
|
|
988 int last_text_vpos = 0;
|
|
989 int stop_vpos;
|
|
990
|
|
991 struct position val, bp, ep, xp, pp;
|
|
992 int scroll_amount = 0;
|
|
993 int delta;
|
|
994 int tab_offset, epto;
|
|
995
|
|
996 if (GPT - BEG < beg_unchanged)
|
|
997 beg_unchanged = GPT - BEG;
|
|
998 if (Z - GPT < end_unchanged)
|
|
999 end_unchanged = Z - GPT;
|
|
1000
|
|
1001 if (beg_unchanged + 1 < start)
|
|
1002 return 0; /* Give up if changes go above top of window */
|
|
1003
|
|
1004 /* Find position before which nothing is changed. */
|
|
1005 bp = *compute_motion (start, 0, lmargin,
|
|
1006 beg_unchanged + 1, 10000, 10000, width, hscroll,
|
|
1007 pos_tab_offset (w, start));
|
|
1008 if (bp.vpos >= height)
|
|
1009 return point < bp.bufpos && !bp.contin;
|
|
1010
|
|
1011 vpos = bp.vpos;
|
|
1012
|
|
1013 /* Find beginning of that screen line. Must display from there. */
|
|
1014 bp = *vmotion (bp.bufpos, 0, width, hscroll, window);
|
|
1015
|
|
1016 pos = bp.bufpos;
|
|
1017 val.hpos = lmargin;
|
|
1018 if (pos < start)
|
|
1019 return -1;
|
|
1020
|
|
1021 /* If about to start displaying at the beginning of a continuation line,
|
|
1022 really start with previous screen line, in case it was not
|
|
1023 continued when last redisplayed */
|
|
1024 if (bp.contin && bp.bufpos - 1 == beg_unchanged && vpos > 0)
|
|
1025 {
|
|
1026 bp = *vmotion (bp.bufpos, -1, width, hscroll, window);
|
|
1027 --vpos;
|
|
1028 pos = bp.bufpos;
|
|
1029 }
|
|
1030
|
|
1031 if (bp.contin && bp.hpos != lmargin)
|
|
1032 {
|
|
1033 val.hpos = bp.prevhpos - width + lmargin;
|
|
1034 pos--;
|
|
1035 }
|
|
1036
|
|
1037 bp.vpos = vpos;
|
|
1038
|
|
1039 /* Find first visible newline after which no more is changed. */
|
|
1040 tem = find_next_newline (Z - max (end_unchanged, Z - ZV), 1);
|
|
1041 if (XTYPE (current_buffer->selective_display) == Lisp_Int
|
|
1042 && XINT (current_buffer->selective_display) > 0)
|
|
1043 while (tem < ZV - 1
|
|
1044 && (position_indentation (tem)
|
|
1045 >= XINT (current_buffer->selective_display)))
|
|
1046 tem = find_next_newline (tem, 1);
|
|
1047
|
|
1048 /* Compute the cursor position after that newline. */
|
|
1049 ep = *compute_motion (pos, vpos, val.hpos, tem,
|
|
1050 height, - (1 << (SHORTBITS - 1)),
|
|
1051 width, hscroll, pos_tab_offset (w, bp.bufpos));
|
|
1052
|
|
1053 /* If changes reach past the text available on the screen,
|
|
1054 just display rest of screen. */
|
|
1055 if (ep.bufpos > Z - XFASTINT (w->window_end_pos))
|
|
1056 stop_vpos = height;
|
|
1057 else
|
|
1058 stop_vpos = ep.vpos;
|
|
1059
|
|
1060 /* If no newline before ep, the line ep is on includes some changes
|
|
1061 that must be displayed. Make sure we don't stop before it. */
|
|
1062 /* Also, if changes reach all the way until ep.bufpos,
|
|
1063 it is possible that something was deleted after the
|
|
1064 newline before it, so the following line must be redrawn. */
|
|
1065 if (stop_vpos == ep.vpos
|
|
1066 && (ep.bufpos == BEGV
|
|
1067 || FETCH_CHAR (ep.bufpos - 1) != '\n'
|
|
1068 || ep.bufpos == Z - end_unchanged))
|
|
1069 stop_vpos = ep.vpos + 1;
|
|
1070
|
|
1071 cursor_vpos = -1;
|
|
1072 overlay_arrow_seen = 0;
|
|
1073
|
|
1074 /* If changes do not reach to bottom of window,
|
|
1075 figure out how much to scroll the rest of the window */
|
|
1076 if (stop_vpos < height)
|
|
1077 {
|
|
1078 /* Now determine how far up or down the rest of the window has moved */
|
|
1079 epto = pos_tab_offset (w, ep.bufpos);
|
|
1080 xp = *compute_motion (ep.bufpos, ep.vpos, ep.hpos,
|
|
1081 Z - XFASTINT (w->window_end_pos),
|
|
1082 10000, 0, width, hscroll, epto);
|
|
1083 scroll_amount = xp.vpos - XFASTINT (w->window_end_vpos);
|
|
1084
|
|
1085 /* Is everything on screen below the changes whitespace?
|
|
1086 If so, no scrolling is really necessary. */
|
|
1087 for (i = ep.bufpos; i < xp.bufpos; i++)
|
|
1088 {
|
|
1089 tem = FETCH_CHAR (i);
|
|
1090 if (tem != ' ' && tem != '\n' && tem != '\t')
|
|
1091 break;
|
|
1092 }
|
|
1093 if (i == xp.bufpos)
|
|
1094 return -2;
|
|
1095
|
|
1096 XFASTINT (w->window_end_vpos) += scroll_amount;
|
|
1097
|
|
1098 /* Before doing any scrolling, verify that point will be on screen. */
|
|
1099 if (point > ep.bufpos && !(point <= xp.bufpos && xp.bufpos < height))
|
|
1100 {
|
|
1101 if (point <= xp.bufpos)
|
|
1102 {
|
|
1103 pp = *compute_motion (ep.bufpos, ep.vpos, ep.hpos,
|
|
1104 point, height, - (1 << (SHORTBITS - 1)),
|
|
1105 width, hscroll, epto);
|
|
1106 }
|
|
1107 else
|
|
1108 {
|
|
1109 pp = *compute_motion (xp.bufpos, xp.vpos, xp.hpos,
|
|
1110 point, height, - (1 << (SHORTBITS - 1)),
|
|
1111 width, hscroll, pos_tab_offset (w, xp.bufpos));
|
|
1112 }
|
|
1113 if (pp.bufpos < point || pp.vpos == height)
|
|
1114 return 0;
|
|
1115 cursor_vpos = pp.vpos + top;
|
|
1116 cursor_hpos = pp.hpos + XFASTINT (w->left);
|
|
1117 }
|
|
1118
|
|
1119 if (stop_vpos - scroll_amount >= height
|
|
1120 || ep.bufpos == xp.bufpos)
|
|
1121 {
|
|
1122 if (scroll_amount < 0)
|
|
1123 stop_vpos -= scroll_amount;
|
|
1124 scroll_amount = 0;
|
|
1125 /* In this path, we have altered window_end_vpos
|
|
1126 and not left it negative.
|
|
1127 We must make sure that, in case display is preempted
|
|
1128 before the screen changes to reflect what we do here,
|
|
1129 further updates will not come to try_window_id
|
|
1130 and assume the screen and window_end_vpos match. */
|
|
1131 blank_end_of_window = 1;
|
|
1132 }
|
|
1133 else if (!scroll_amount)
|
|
1134 {}
|
|
1135 else if (bp.bufpos == Z - end_unchanged)
|
|
1136 {
|
|
1137 /* If reprinting everything is nearly as fast as scrolling,
|
|
1138 don't bother scrolling. Can happen if lines are short. */
|
|
1139 if (scroll_cost (s, bp.vpos + top - scroll_amount,
|
|
1140 top + height - max (0, scroll_amount),
|
|
1141 scroll_amount)
|
|
1142 > xp.bufpos - bp.bufpos - 20)
|
|
1143 /* Return "try normal display with same window-start."
|
|
1144 Too bad we can't prevent further scroll-thinking. */
|
|
1145 return -2;
|
|
1146 /* If pure deletion, scroll up as many lines as possible.
|
|
1147 In common case of killing a line, this can save the
|
|
1148 following line from being overwritten by scrolling
|
|
1149 and therefore having to be redrawn. */
|
|
1150 tem = scroll_screen_lines (s, bp.vpos + top - scroll_amount,
|
|
1151 top + height - max (0, scroll_amount),
|
|
1152 scroll_amount);
|
|
1153 if (!tem) stop_vpos = height;
|
|
1154 }
|
|
1155 else if (scroll_amount)
|
|
1156 {
|
|
1157 /* If reprinting everything is nearly as fast as scrolling,
|
|
1158 don't bother scrolling. Can happen if lines are short. */
|
|
1159 /* Note that if scroll_amount > 0, xp.bufpos - bp.bufpos is an
|
|
1160 overestimate of cost of reprinting, since xp.bufpos
|
|
1161 would end up below the bottom of the window. */
|
|
1162 if (scroll_cost (s, ep.vpos + top - scroll_amount,
|
|
1163 top + height - max (0, scroll_amount),
|
|
1164 scroll_amount)
|
|
1165 > xp.bufpos - ep.bufpos - 20)
|
|
1166 /* Return "try normal display with same window-start."
|
|
1167 Too bad we can't prevent further scroll-thinking. */
|
|
1168 return -2;
|
|
1169 tem = scroll_screen_lines (s, ep.vpos + top - scroll_amount,
|
|
1170 top + height - max (0, scroll_amount),
|
|
1171 scroll_amount);
|
|
1172 if (!tem) stop_vpos = height;
|
|
1173 }
|
|
1174 }
|
|
1175
|
|
1176 /* In any case, do not display past bottom of window */
|
|
1177 if (stop_vpos >= height)
|
|
1178 {
|
|
1179 stop_vpos = height;
|
|
1180 scroll_amount = 0;
|
|
1181 }
|
|
1182
|
|
1183 /* Handle case where pos is before w->start --
|
|
1184 can happen if part of line had been clipped and is not clipped now */
|
|
1185 if (vpos == 0 && pos < marker_position (w->start))
|
|
1186 Fset_marker (w->start, make_number (pos), Qnil);
|
|
1187
|
|
1188 /* Redisplay the lines where the text was changed */
|
|
1189 last_text_vpos = vpos;
|
|
1190 tab_offset = pos_tab_offset (w, pos);
|
|
1191 /* If we are starting display in mid-character, correct tab_offset
|
|
1192 to account for passing the line that that character really starts in. */
|
|
1193 if (val.hpos < lmargin)
|
|
1194 tab_offset += width;
|
|
1195 while (vpos < stop_vpos)
|
|
1196 {
|
|
1197 val = *display_text_line (w, pos, top + vpos++, val.hpos, tab_offset);
|
|
1198 tab_offset += width;
|
|
1199 if (val.vpos) tab_offset = 0;
|
|
1200 if (pos != val.bufpos)
|
|
1201 last_text_vpos
|
|
1202 /* Next line, unless prev line ended in end of buffer with no cr */
|
|
1203 = vpos - (val.vpos && FETCH_CHAR (val.bufpos - 1) != '\n');
|
|
1204 pos = val.bufpos;
|
|
1205 }
|
|
1206
|
|
1207 /* There are two cases:
|
|
1208 1) we have displayed down to the bottom of the window
|
|
1209 2) we have scrolled lines below stop_vpos by scroll_amount */
|
|
1210
|
|
1211 if (vpos == height)
|
|
1212 {
|
|
1213 /* If last line is continued in middle of character,
|
|
1214 include the split character in the text considered on the screen */
|
|
1215 if (val.hpos < lmargin)
|
|
1216 val.bufpos++;
|
|
1217 XFASTINT (w->window_end_vpos) = last_text_vpos;
|
|
1218 XFASTINT (w->window_end_pos) = Z - val.bufpos;
|
|
1219 }
|
|
1220
|
|
1221 /* If scrolling made blank lines at window bottom,
|
|
1222 redisplay to fill those lines */
|
|
1223 if (scroll_amount < 0)
|
|
1224 {
|
|
1225 /* Don't consider these lines for general-purpose scrolling.
|
|
1226 That will save time in the scrolling computation. */
|
|
1227 SCREEN_SCROLL_BOTTOM_VPOS (s) = xp.vpos;
|
|
1228 vpos = xp.vpos;
|
|
1229 pos = xp.bufpos;
|
|
1230 val.hpos = lmargin;
|
|
1231 if (pos == ZV)
|
|
1232 vpos = height + scroll_amount;
|
|
1233 else if (xp.contin && xp.hpos != lmargin)
|
|
1234 {
|
|
1235 val.hpos = xp.prevhpos - width + lmargin;
|
|
1236 pos--;
|
|
1237 }
|
|
1238
|
|
1239 blank_end_of_window = 1;
|
|
1240 tab_offset = pos_tab_offset (w, pos);
|
|
1241 /* If we are starting display in mid-character, correct tab_offset
|
|
1242 to account for passing the line that that character starts in. */
|
|
1243 if (val.hpos < lmargin)
|
|
1244 tab_offset += width;
|
|
1245
|
|
1246 while (vpos < height)
|
|
1247 {
|
|
1248 val = *display_text_line (w, pos, top + vpos++, val.hpos, tab_offset);
|
|
1249 tab_offset += width;
|
|
1250 if (val.vpos) tab_offset = 0;
|
|
1251 pos = val.bufpos;
|
|
1252 }
|
|
1253
|
|
1254 /* Here is a case where display_text_line sets cursor_vpos wrong.
|
|
1255 Make it be fixed up, below. */
|
|
1256 if (xp.bufpos == ZV
|
|
1257 && xp.bufpos == point)
|
|
1258 cursor_vpos = -1;
|
|
1259 }
|
|
1260
|
|
1261 /* If bottom just moved off end of screen, change mode line percentage. */
|
|
1262 if (XFASTINT (w->window_end_pos) == 0
|
|
1263 && Z != val.bufpos)
|
|
1264 w->update_mode_line = Qt;
|
|
1265
|
|
1266 /* Attempt to adjust end-of-text positions to new bottom line */
|
|
1267 if (scroll_amount)
|
|
1268 {
|
|
1269 delta = height - xp.vpos;
|
|
1270 if (delta < 0
|
|
1271 || (delta > 0 && xp.bufpos <= ZV)
|
|
1272 || (delta == 0 && xp.hpos))
|
|
1273 {
|
|
1274 val = *vmotion (Z - XFASTINT (w->window_end_pos),
|
|
1275 delta, width, hscroll, window);
|
|
1276 XFASTINT (w->window_end_pos) = Z - val.bufpos;
|
|
1277 XFASTINT (w->window_end_vpos) += val.vpos;
|
|
1278 }
|
|
1279 }
|
|
1280
|
|
1281 w->window_end_valid = Qnil;
|
|
1282
|
|
1283 /* If point was not in a line that was displayed, find it */
|
|
1284 if (cursor_vpos < 0)
|
|
1285 {
|
|
1286 val = *compute_motion (start, 0, lmargin, point, 10000, 10000,
|
|
1287 width, hscroll, pos_tab_offset (w, start));
|
|
1288 /* Admit failure if point is off screen now */
|
|
1289 if (val.vpos >= height)
|
|
1290 {
|
|
1291 for (vpos = 0; vpos < height; vpos++)
|
|
1292 cancel_line (vpos + top, s);
|
|
1293 return 0;
|
|
1294 }
|
|
1295 cursor_vpos = val.vpos + top;
|
|
1296 cursor_hpos = val.hpos + XFASTINT (w->left);
|
|
1297 }
|
|
1298
|
|
1299 SCREEN_CURSOR_X (s) = max (0, cursor_hpos);
|
|
1300 SCREEN_CURSOR_Y (s) = cursor_vpos;
|
|
1301
|
|
1302 if (debug_end_pos)
|
|
1303 {
|
|
1304 val = *compute_motion (start, 0, lmargin, ZV,
|
|
1305 height, - (1 << (SHORTBITS - 1)),
|
|
1306 width, hscroll, pos_tab_offset (w, start));
|
|
1307 if (val.vpos != XFASTINT (w->window_end_vpos))
|
|
1308 abort ();
|
|
1309 if (XFASTINT (w->window_end_pos)
|
|
1310 != Z - val.bufpos)
|
|
1311 abort ();
|
|
1312 }
|
|
1313
|
|
1314 return 1;
|
|
1315 }
|
|
1316
|
301
|
1317 /* Copy glyphs from the rope FROM to T.
|
|
1318 But don't actually copy the parts that would come in before S.
|
277
|
1319 Value is T, advanced past the copied data.
|
|
1320
|
|
1321 Characters in FROM are grouped into units of `sizeof GLYPH' chars;
|
|
1322 any extra chars at the end of FROM are ignored. */
|
|
1323
|
|
1324 GLYPH *
|
|
1325 copy_rope (t, s, from)
|
|
1326 register GLYPH *t; /* Copy to here. */
|
|
1327 register GLYPH *s; /* Starting point. */
|
|
1328 Lisp_Object from; /* Data to copy; known to be a string. */
|
|
1329 {
|
|
1330 register int n = XSTRING (from)->size / sizeof (GLYPH);
|
|
1331 register GLYPH *f = (GLYPH *) XSTRING (from)->data;
|
|
1332
|
|
1333 while (n--)
|
|
1334 {
|
|
1335 if (t >= s) *t = *f;
|
|
1336 ++t;
|
|
1337 ++f;
|
|
1338 }
|
|
1339 return t;
|
|
1340 }
|
|
1341
|
|
1342 /* Display one line of window w, starting at position START in W's buffer.
|
|
1343 Display starting at horizontal position HPOS, which is normally zero
|
|
1344 or negative. A negative value causes output up to hpos = 0 to be discarded.
|
|
1345 This is done for negative hscroll, or when this is a continuation line
|
|
1346 and the continuation occurred in the middle of a multi-column character.
|
|
1347
|
|
1348 TABOFFSET is an offset for ostensible hpos, used in tab stop calculations.
|
|
1349
|
|
1350 Display on position VPOS on the screen. (origin 0).
|
|
1351
|
|
1352 Returns a STRUCT POSITION giving character to start next line with
|
|
1353 and where to display it, including a zero or negative hpos.
|
|
1354 The vpos field is not really a vpos; it is 1 unless the line is continued */
|
|
1355
|
|
1356 struct position val_display_text_line;
|
|
1357
|
|
1358 static struct position *
|
|
1359 display_text_line (w, start, vpos, hpos, taboffset)
|
|
1360 struct window *w;
|
|
1361 int start;
|
|
1362 int vpos;
|
|
1363 int hpos;
|
|
1364 int taboffset;
|
|
1365 {
|
|
1366 register int pos = start;
|
|
1367 register int c;
|
|
1368 register GLYPH *p1;
|
|
1369 int end;
|
|
1370 register int pause;
|
|
1371 register unsigned char *p;
|
|
1372 GLYPH *endp;
|
|
1373 register GLYPH *startp;
|
|
1374 register GLYPH *p1prev;
|
|
1375 SCREEN_PTR s = XSCREEN (w->screen);
|
|
1376 int tab_width = XINT (current_buffer->tab_width);
|
|
1377 int ctl_arrow = !NULL (current_buffer->ctl_arrow);
|
|
1378 int width = XFASTINT (w->width) - 1
|
|
1379 - (XFASTINT (w->width) + XFASTINT (w->left) != SCREEN_WIDTH (s));
|
|
1380 struct position val;
|
|
1381 int lastpos;
|
|
1382 int invis;
|
|
1383 int hscroll = XINT (w->hscroll);
|
|
1384 int truncate = hscroll
|
|
1385 || (truncate_partial_width_windows
|
|
1386 && XFASTINT (w->width) < SCREEN_WIDTH (s))
|
|
1387 || !NULL (current_buffer->truncate_lines);
|
|
1388 int selective
|
|
1389 = XTYPE (current_buffer->selective_display) == Lisp_Int
|
|
1390 ? XINT (current_buffer->selective_display)
|
|
1391 : !NULL (current_buffer->selective_display) ? -1 : 0;
|
|
1392 #ifndef old
|
|
1393 int selective_e = selective && !NULL (current_buffer->selective_display_ellipses);
|
|
1394 #endif
|
|
1395 register struct screen_glyphs *desired_glyphs = SCREEN_DESIRED_GLYPHS (s);
|
|
1396 register struct Lisp_Vector *dp = window_display_table (w);
|
|
1397 int selective_rlen
|
|
1398 = (selective && dp && XTYPE (DISP_INVIS_ROPE (dp)) == Lisp_String
|
|
1399 ? XSTRING (DISP_INVIS_ROPE (dp))->size / sizeof (GLYPH) : 0);
|
|
1400 GLYPH truncator = (dp == 0 || XTYPE (DISP_TRUNC_GLYPH (dp)) != Lisp_Int
|
|
1401 ? '$' : XINT (DISP_TRUNC_GLYPH (dp)));
|
|
1402 GLYPH continuer = (dp == 0 || XTYPE (DISP_CONTINUE_GLYPH (dp)) != Lisp_Int
|
|
1403 ? '\\' : XINT (DISP_CONTINUE_GLYPH (dp)));
|
|
1404
|
|
1405 hpos += XFASTINT (w->left);
|
|
1406 get_display_line (s, vpos, XFASTINT (w->left));
|
|
1407 if (tab_width <= 0 || tab_width > 20) tab_width = 8;
|
|
1408
|
|
1409 if (MINI_WINDOW_P (w) && start == 1
|
|
1410 && vpos == XFASTINT (w->top))
|
|
1411 {
|
|
1412 if (minibuf_prompt)
|
|
1413 hpos = display_string (w, vpos, minibuf_prompt, hpos,
|
|
1414 (!truncate ? continuer : truncator),
|
|
1415 -1, -1);
|
|
1416 minibuf_prompt_width = hpos;
|
|
1417 }
|
|
1418
|
|
1419 desired_glyphs->bufp[vpos] = pos;
|
|
1420 p1 = desired_glyphs->glyphs[vpos] + hpos;
|
|
1421 end = ZV;
|
|
1422 startp = desired_glyphs->glyphs[vpos] + XFASTINT (w->left);
|
|
1423 endp = startp + width;
|
|
1424
|
|
1425 /* Loop generating characters.
|
|
1426 Stop at end of buffer, before newline,
|
|
1427 or if reach or pass continuation column. */
|
|
1428
|
|
1429 pause = pos;
|
|
1430 while (p1 < endp)
|
|
1431 {
|
|
1432 p1prev = p1;
|
|
1433 if (pos == pause)
|
|
1434 {
|
|
1435 if (pos == end)
|
|
1436 break;
|
|
1437 if (pos == point && cursor_vpos < 0)
|
|
1438 {
|
|
1439 cursor_vpos = vpos;
|
|
1440 cursor_hpos = p1 - startp;
|
|
1441 }
|
|
1442
|
|
1443 pause = end;
|
|
1444 if (pos < point && point < pause)
|
|
1445 pause = point;
|
|
1446 if (pos < GPT && GPT < pause)
|
|
1447 pause = GPT;
|
|
1448
|
|
1449 p = &FETCH_CHAR (pos);
|
|
1450 }
|
|
1451 c = *p++;
|
|
1452 if (c >= 040 && c < 0177
|
|
1453 && (dp == 0 || XTYPE (DISP_CHAR_ROPE (dp, c)) != Lisp_String))
|
|
1454 {
|
|
1455 if (p1 >= startp)
|
|
1456 *p1 = c;
|
|
1457 p1++;
|
|
1458 }
|
|
1459 else if (c == '\n')
|
|
1460 {
|
|
1461 invis = 0;
|
|
1462 while (pos < end
|
|
1463 && selective > 0
|
|
1464 && position_indentation (pos + 1) >= selective)
|
|
1465 {
|
|
1466 invis = 1;
|
|
1467 pos = find_next_newline (pos + 1, 1);
|
|
1468 if (FETCH_CHAR (pos - 1) == '\n')
|
|
1469 pos--;
|
|
1470 }
|
|
1471 if (invis && selective_rlen > 0 && p1 >= startp)
|
|
1472 {
|
|
1473 p1 += selective_rlen;
|
|
1474 if (p1 - startp > width)
|
|
1475 p1 = endp;
|
|
1476 bcopy (XSTRING (DISP_INVIS_ROPE (dp))->data, p1prev,
|
|
1477 (p1 - p1prev) * sizeof (GLYPH));
|
|
1478 }
|
|
1479 break;
|
|
1480 }
|
|
1481 else if (c == '\t')
|
|
1482 {
|
|
1483 do
|
|
1484 {
|
|
1485 if (p1 >= startp && p1 < endp)
|
|
1486 *p1 = SPACEGLYPH;
|
|
1487 p1++;
|
|
1488 }
|
|
1489 while ((p1 - startp + taboffset + hscroll - (hscroll > 0))
|
|
1490 % tab_width);
|
|
1491 }
|
|
1492 else if (c == Ctl('M') && selective == -1)
|
|
1493 {
|
|
1494 pos = find_next_newline (pos, 1);
|
|
1495 if (FETCH_CHAR (pos - 1) == '\n')
|
|
1496 pos--;
|
|
1497 if (selective_rlen > 0)
|
|
1498 {
|
|
1499 p1 += selective_rlen;
|
|
1500 if (p1 - startp > width)
|
|
1501 p1 = endp;
|
|
1502 bcopy (XSTRING (DISP_INVIS_ROPE (dp))->data, p1prev,
|
|
1503 (p1 - p1prev) * sizeof (GLYPH));
|
|
1504 }
|
|
1505 break;
|
|
1506 }
|
|
1507 else if (dp != 0 && XTYPE (DISP_CHAR_ROPE (dp, c)) == Lisp_String)
|
|
1508 {
|
|
1509 p1 = copy_rope (p1, startp, DISP_CHAR_ROPE (dp, c));
|
|
1510 }
|
|
1511 else if (c < 0200 && ctl_arrow)
|
|
1512 {
|
|
1513 if (p1 >= startp)
|
|
1514 *p1 = (dp && XTYPE (DISP_CTRL_GLYPH (dp)) == Lisp_Int
|
|
1515 ? XINT (DISP_CTRL_GLYPH (dp)) : '^');
|
|
1516 p1++;
|
|
1517 if (p1 >= startp)
|
|
1518 *p1 = c ^ 0100;
|
|
1519 p1++;
|
|
1520 }
|
|
1521 else
|
|
1522 {
|
|
1523 if (p1 >= startp)
|
|
1524 *p1 = (dp && XTYPE (DISP_ESCAPE_GLYPH (dp)) == Lisp_Int
|
|
1525 ? XINT (DISP_ESCAPE_GLYPH (dp)) : '\\');
|
|
1526 p1++;
|
|
1527 if (p1 >= startp)
|
|
1528 *p1 = (c >> 6) + '0';
|
|
1529 p1++;
|
|
1530 if (p1 >= startp)
|
|
1531 *p1 = (7 & (c >> 3)) + '0';
|
|
1532 p1++;
|
|
1533 if (p1 >= startp)
|
|
1534 *p1 = (7 & c) + '0';
|
|
1535 p1++;
|
|
1536 }
|
|
1537 pos++;
|
|
1538 }
|
|
1539
|
|
1540 val.hpos = - XINT (w->hscroll);
|
|
1541 if (val.hpos)
|
|
1542 val.hpos++;
|
|
1543
|
|
1544 val.vpos = 1;
|
|
1545
|
|
1546 lastpos = pos;
|
|
1547
|
|
1548 /* Handle continuation in middle of a character */
|
|
1549 /* by backing up over it */
|
|
1550 if (p1 > endp)
|
|
1551 {
|
|
1552 /* Start the next line with that same character */
|
|
1553 pos--;
|
|
1554 /* but at a negative hpos, to skip the columns output on this line. */
|
|
1555 val.hpos += p1prev - endp;
|
|
1556 /* Keep in this line everything up to the continuation column. */
|
|
1557 p1 = endp;
|
|
1558 }
|
|
1559
|
|
1560 /* Finish deciding which character to start the next line on,
|
|
1561 and what hpos to start it at.
|
|
1562 Also set `lastpos' to the last position which counts as "on this line"
|
|
1563 for cursor-positioning. */
|
|
1564
|
|
1565 if (pos < ZV)
|
|
1566 {
|
|
1567 if (FETCH_CHAR (pos) == '\n')
|
|
1568 /* If stopped due to a newline, start next line after it */
|
|
1569 pos++;
|
|
1570 else
|
|
1571 /* Stopped due to right margin of window */
|
|
1572 {
|
|
1573 if (truncate)
|
|
1574 {
|
|
1575 *p1++ = truncator;
|
|
1576 /* Truncating => start next line after next newline,
|
|
1577 and point is on this line if it is before the newline,
|
|
1578 and skip none of first char of next line */
|
|
1579 pos = find_next_newline (pos, 1);
|
|
1580 val.hpos = XINT (w->hscroll) ? 1 - XINT (w->hscroll) : 0;
|
|
1581
|
|
1582 lastpos = pos - (FETCH_CHAR (pos - 1) == '\n');
|
|
1583 }
|
|
1584 else
|
|
1585 {
|
|
1586 *p1++ = continuer;
|
|
1587 val.vpos = 0;
|
|
1588 lastpos--;
|
|
1589 }
|
|
1590 }
|
|
1591 }
|
|
1592
|
|
1593 /* If point is at eol or in invisible text at eol,
|
|
1594 record its screen location now. */
|
|
1595
|
|
1596 if (start <= point && point <= lastpos && cursor_vpos < 0)
|
|
1597 {
|
|
1598 cursor_vpos = vpos;
|
|
1599 cursor_hpos = p1 - startp;
|
|
1600 }
|
|
1601
|
|
1602 if (cursor_vpos == vpos)
|
|
1603 {
|
|
1604 if (cursor_hpos < 0) cursor_hpos = 0;
|
|
1605 if (cursor_hpos > width) cursor_hpos = width;
|
|
1606 cursor_hpos += XFASTINT (w->left);
|
|
1607 if (w == XWINDOW (SCREEN_SELECTED_WINDOW (s)))
|
|
1608 {
|
|
1609 SCREEN_CURSOR_Y (s) = cursor_vpos;
|
|
1610 SCREEN_CURSOR_X (s) = cursor_hpos;
|
|
1611
|
|
1612 if (w == XWINDOW (selected_window))
|
|
1613 {
|
|
1614 /* Line is not continued and did not start
|
|
1615 in middle of character */
|
|
1616 if ((hpos - XFASTINT (w->left)
|
|
1617 == (XINT (w->hscroll) ? 1 - XINT (w->hscroll) : 0))
|
|
1618 && val.vpos)
|
|
1619 {
|
|
1620 this_line_bufpos = start;
|
|
1621 this_line_buffer = current_buffer;
|
|
1622 this_line_vpos = cursor_vpos;
|
|
1623 this_line_start_hpos = hpos;
|
|
1624 this_line_endpos = Z - lastpos;
|
|
1625 }
|
|
1626 else
|
|
1627 this_line_bufpos = 0;
|
|
1628 }
|
|
1629 }
|
|
1630 }
|
|
1631
|
|
1632 /* If hscroll and line not empty, insert truncation-at-left marker */
|
|
1633 if (hscroll && lastpos != start)
|
|
1634 {
|
|
1635 *startp = truncator;
|
|
1636 if (p1 <= startp)
|
|
1637 p1 = startp + 1;
|
|
1638 }
|
|
1639
|
|
1640 if (XFASTINT (w->width) + XFASTINT (w->left) != SCREEN_WIDTH (s))
|
|
1641 {
|
|
1642 endp++;
|
|
1643 if (p1 < startp) p1 = startp;
|
|
1644 while (p1 < endp) *p1++ = SPACEGLYPH;
|
|
1645 *p1++ = '|';
|
|
1646 }
|
|
1647 desired_glyphs->used[vpos] = max (desired_glyphs->used[vpos],
|
|
1648 p1 - desired_glyphs->glyphs[vpos]);
|
|
1649 desired_glyphs->glyphs[vpos][desired_glyphs->used[vpos]] = 0;
|
|
1650
|
|
1651 /* If the start of this line is the overlay arrow-position,
|
|
1652 then put the arrow string into the display-line. */
|
|
1653
|
|
1654 if (XTYPE (Voverlay_arrow_position) == Lisp_Marker
|
|
1655 && current_buffer == XMARKER (Voverlay_arrow_position)->buffer
|
|
1656 && start == marker_position (Voverlay_arrow_position)
|
|
1657 && XTYPE (Voverlay_arrow_string) == Lisp_String
|
|
1658 && ! overlay_arrow_seen)
|
|
1659 {
|
|
1660 unsigned char *p = XSTRING (Voverlay_arrow_string)->data;
|
|
1661 int i;
|
|
1662 int len = XSTRING (Voverlay_arrow_string)->size;
|
|
1663
|
|
1664 if (len > XFASTINT (w->width) - 1)
|
|
1665 len = XFASTINT (w->width) - 1;
|
|
1666 for (i = 0; i < len; i++)
|
|
1667 startp[i] = p[i];
|
|
1668 if (desired_glyphs->used[vpos] <
|
|
1669 (len + startp - desired_glyphs->glyphs[vpos]))
|
|
1670 desired_glyphs->used[vpos] = len + startp - desired_glyphs->glyphs[vpos];
|
|
1671
|
|
1672 overlay_arrow_seen = 1;
|
|
1673 }
|
|
1674
|
|
1675 val.bufpos = pos;
|
|
1676 val_display_text_line = val;
|
|
1677 return &val_display_text_line;
|
|
1678 }
|
|
1679
|
|
1680 /* Display the mode line for window w */
|
|
1681
|
|
1682 static void
|
|
1683 display_mode_line (w)
|
|
1684 struct window *w;
|
|
1685 {
|
|
1686 register int vpos = XFASTINT (w->height) + XFASTINT (w->top) - 1;
|
|
1687 register int left = XFASTINT (w->left);
|
|
1688 register int right = XFASTINT (w->width) + left;
|
|
1689 register SCREEN_PTR s = XSCREEN (WINDOW_SCREEN (w));
|
|
1690
|
|
1691 get_display_line (s, vpos, left);
|
|
1692 display_mode_element (w, vpos, left, 0, right, right,
|
|
1693 current_buffer->mode_line_format);
|
|
1694 SCREEN_DESIRED_GLYPHS (s)->bufp[vpos] = 0;
|
|
1695
|
|
1696 /* Make the mode line inverse video if the entire line
|
|
1697 is made of mode lines.
|
|
1698 I.e. if this window is full width,
|
|
1699 or if it is the child of a full width window
|
|
1700 (which implies that that window is split side-by-side
|
|
1701 and the rest of this line is mode lines of the sibling windows). */
|
|
1702 if (XFASTINT (w->width) == SCREEN_WIDTH (s)
|
|
1703 || XFASTINT (XWINDOW (w->parent)->width) == SCREEN_WIDTH (s))
|
|
1704 s->desired_glyphs->highlight[vpos] = mode_line_inverse_video;
|
|
1705
|
|
1706 #ifdef HAVE_X_WINDOWS
|
|
1707 /* I'm trying this out because I saw Unimpress use it, but it's
|
|
1708 possible that this may fuck adversely with some window managers. jla */
|
|
1709
|
|
1710 if (SCREEN_IS_X (s)
|
|
1711 && (XTYPE (Vglobal_minibuffer_screen) != Lisp_Screen
|
|
1712 || s != XSCREEN (Vglobal_minibuffer_screen))
|
|
1713 && w == XWINDOW (s->selected_window)
|
|
1714 && (NULL (Fstring_equal (XBUFFER (w->buffer)->name, s->name))))
|
|
1715 x_set_name (s, XBUFFER (w->buffer)->name, Qnil);
|
|
1716 #endif
|
|
1717 }
|
|
1718
|
|
1719 /* Contribute ELT to the mode line for window W.
|
|
1720 How it translates into text depends on its data type.
|
|
1721
|
|
1722 VPOS is the position of the mode line being displayed.
|
|
1723
|
|
1724 HPOS is the position (absolute on screen) where this element's text
|
|
1725 should start. The output is truncated automatically at the right
|
|
1726 edge of window W.
|
|
1727
|
|
1728 DEPTH is the depth in recursion. It is used to prevent
|
|
1729 infinite recursion here.
|
|
1730
|
|
1731 MINENDCOL is the hpos before which the element may not end.
|
|
1732 The element is padded at the right with spaces if nec
|
|
1733 to reach this column.
|
|
1734
|
|
1735 MAXENDCOL is the hpos past which this element may not extend.
|
|
1736 If MINENDCOL is > MAXENDCOL, MINENDCOL takes priority.
|
|
1737 (This is necessary to make nested padding and truncation work.)
|
|
1738
|
|
1739 Returns the hpos of the end of the text generated by ELT.
|
|
1740 The next element will receive that value as its HPOS arg,
|
|
1741 so as to concatenate the elements. */
|
|
1742
|
|
1743 static int
|
|
1744 display_mode_element (w, vpos, hpos, depth, minendcol, maxendcol, elt)
|
|
1745 struct window *w;
|
|
1746 register int vpos, hpos;
|
|
1747 int depth;
|
|
1748 int minendcol;
|
|
1749 register int maxendcol;
|
|
1750 register Lisp_Object elt;
|
|
1751 {
|
|
1752 tail_recurse:
|
|
1753 if (depth > 10)
|
|
1754 goto invalid;
|
|
1755
|
|
1756 depth++;
|
|
1757
|
|
1758 #ifdef SWITCH_ENUM_BUG
|
|
1759 switch ((int) XTYPE (elt))
|
|
1760 #else
|
|
1761 switch (XTYPE (elt))
|
|
1762 #endif
|
|
1763 {
|
|
1764 case Lisp_String:
|
|
1765 {
|
|
1766 /* A string: output it and check for %-constructs within it. */
|
|
1767 register unsigned char c;
|
|
1768 register unsigned char *this = XSTRING (elt)->data;
|
|
1769
|
|
1770 while (hpos < maxendcol && *this)
|
|
1771 {
|
|
1772 unsigned char *last = this;
|
|
1773 while ((c = *this++) != '\0' && c != '%')
|
|
1774 ;
|
|
1775 if (this - 1 != last)
|
|
1776 {
|
|
1777 register int lim = --this - last + hpos;
|
|
1778 hpos = display_string (w, vpos, last, hpos, 0, hpos,
|
|
1779 min (lim, maxendcol));
|
|
1780 }
|
|
1781 else /* c == '%' */
|
|
1782 {
|
|
1783 register int spec_width = 0;
|
|
1784
|
|
1785 /* We can't allow -ve args due to the "%-" construct */
|
|
1786 /* Argument specifies minwidth but not maxwidth
|
|
1787 (maxwidth can be specified by
|
|
1788 (<negative-number> . <stuff>) mode-line elements) */
|
|
1789
|
|
1790 while ((c = *this++) >= '0' && c <= '9')
|
|
1791 {
|
|
1792 spec_width = spec_width * 10 + (c - '0');
|
|
1793 }
|
|
1794
|
|
1795 spec_width += hpos;
|
|
1796 if (spec_width > maxendcol)
|
|
1797 spec_width = maxendcol;
|
|
1798
|
|
1799 if (c == 'M')
|
|
1800 hpos = display_mode_element (w, vpos, hpos, depth,
|
|
1801 spec_width, maxendcol,
|
|
1802 Vglobal_mode_string);
|
|
1803 else if (c != 0)
|
|
1804 hpos = display_string (w, vpos,
|
|
1805 decode_mode_spec (w, c,
|
|
1806 maxendcol - hpos),
|
|
1807 hpos, 0, spec_width, maxendcol);
|
|
1808 }
|
|
1809 }
|
|
1810 }
|
|
1811 break;
|
|
1812
|
|
1813 case Lisp_Symbol:
|
|
1814 /* A symbol: process the value of the symbol recursively
|
|
1815 as if it appeared here directly. Avoid error if symbol void.
|
|
1816 Special case: if value of symbol is a string, output the string
|
|
1817 literally. */
|
|
1818 {
|
|
1819 register Lisp_Object tem;
|
|
1820 tem = Fboundp (elt);
|
|
1821 if (!NULL (tem))
|
|
1822 {
|
|
1823 tem = Fsymbol_value (elt);
|
|
1824 /* If value is a string, output that string literally:
|
|
1825 don't check for % within it. */
|
|
1826 if (XTYPE (tem) == Lisp_String)
|
|
1827 hpos = display_string (w, vpos, XSTRING (tem)->data,
|
|
1828 hpos, 0, minendcol, maxendcol);
|
|
1829 /* Give up right away for nil or t. */
|
|
1830 else if (!EQ (tem, elt))
|
|
1831 { elt = tem; goto tail_recurse; }
|
|
1832 }
|
|
1833 }
|
|
1834 break;
|
|
1835
|
|
1836 case Lisp_Cons:
|
|
1837 {
|
|
1838 register Lisp_Object car, tem;
|
|
1839
|
|
1840 /* A cons cell: three distinct cases.
|
|
1841 If first element is a string or a cons, process all the elements
|
|
1842 and effectively concatenate them.
|
|
1843 If first element is a negative number, truncate displaying cdr to
|
|
1844 at most that many characters. If positive, pad (with spaces)
|
|
1845 to at least that many characters.
|
|
1846 If first element is a symbol, process the cadr or caddr recursively
|
|
1847 according to whether the symbol's value is non-nil or nil. */
|
|
1848 car = XCONS (elt)->car;
|
|
1849 if (XTYPE (car) == Lisp_Symbol)
|
|
1850 {
|
|
1851 tem = Fboundp (car);
|
|
1852 elt = XCONS (elt)->cdr;
|
|
1853 if (XTYPE (elt) != Lisp_Cons)
|
|
1854 goto invalid;
|
|
1855 /* elt is now the cdr, and we know it is a cons cell.
|
|
1856 Use its car if CAR has a non-nil value. */
|
|
1857 if (!NULL (tem))
|
|
1858 {
|
|
1859 tem = Fsymbol_value (car);
|
|
1860 if (!NULL (tem))
|
|
1861 { elt = XCONS (elt)->car; goto tail_recurse; }
|
|
1862 }
|
|
1863 /* Symbol's value is nil (or symbol is unbound)
|
|
1864 Get the cddr of the original list
|
|
1865 and if possible find the caddr and use that. */
|
|
1866 elt = XCONS (elt)->cdr;
|
|
1867 if (NULL (elt))
|
|
1868 break;
|
|
1869 else if (XTYPE (elt) != Lisp_Cons)
|
|
1870 goto invalid;
|
|
1871 elt = XCONS (elt)->car;
|
|
1872 goto tail_recurse;
|
|
1873 }
|
|
1874 else if (XTYPE (car) == Lisp_Int)
|
|
1875 {
|
|
1876 register int lim = XINT (car);
|
|
1877 elt = XCONS (elt)->cdr;
|
|
1878 if (lim < 0)
|
|
1879 /* Negative int means reduce maximum width.
|
|
1880 DO NOT change MINENDCOL here!
|
|
1881 (20 -10 . foo) should truncate foo to 10 col
|
|
1882 and then pad to 20. */
|
|
1883 maxendcol = min (maxendcol, hpos - lim);
|
|
1884 else if (lim > 0)
|
|
1885 {
|
|
1886 /* Padding specified. Don't let it be more than
|
|
1887 current maximum. */
|
|
1888 lim += hpos;
|
|
1889 if (lim > maxendcol)
|
|
1890 lim = maxendcol;
|
|
1891 /* If that's more padding than already wanted, queue it.
|
|
1892 But don't reduce padding already specified even if
|
|
1893 that is beyond the current truncation point. */
|
|
1894 if (lim > minendcol)
|
|
1895 minendcol = lim;
|
|
1896 }
|
|
1897 goto tail_recurse;
|
|
1898 }
|
|
1899 else if (XTYPE (car) == Lisp_String || XTYPE (car) == Lisp_Cons)
|
|
1900 {
|
|
1901 register int limit = 50;
|
|
1902 /* LIMIT is to protect against circular lists. */
|
|
1903 while (XTYPE (elt) == Lisp_Cons && --limit > 0
|
|
1904 && hpos < maxendcol)
|
|
1905 {
|
|
1906 hpos = display_mode_element (w, vpos, hpos, depth,
|
|
1907 hpos, maxendcol,
|
|
1908 XCONS (elt)->car);
|
|
1909 elt = XCONS (elt)->cdr;
|
|
1910 }
|
|
1911 }
|
|
1912 }
|
|
1913 break;
|
|
1914
|
|
1915 default:
|
|
1916 invalid:
|
|
1917 return (display_string (w, vpos, "*invalid*", hpos, 0,
|
|
1918 minendcol, maxendcol));
|
|
1919 }
|
|
1920
|
|
1921 end:
|
|
1922 if (minendcol > hpos)
|
|
1923 hpos = display_string (w, vpos, "", hpos, 0, minendcol, -1);
|
|
1924 return hpos;
|
|
1925 }
|
|
1926
|
|
1927 /* Return a string for the output of a mode line %-spec for window W,
|
|
1928 generated by character C and width MAXWIDTH. */
|
|
1929
|
|
1930 static char *
|
|
1931 decode_mode_spec (w, c, maxwidth)
|
|
1932 struct window *w;
|
|
1933 register char c;
|
|
1934 register int maxwidth;
|
|
1935 {
|
|
1936 Lisp_Object obj = Qnil;
|
|
1937 SCREEN_PTR scr = XSCREEN (WINDOW_SCREEN (w));
|
|
1938 char *decode_mode_spec_buf = (char *) SCREEN_TEMP_GLYPHS (scr)->total_contents;
|
|
1939
|
|
1940 if (maxwidth > SCREEN_WIDTH (scr))
|
|
1941 maxwidth = SCREEN_WIDTH (scr);
|
|
1942
|
|
1943 switch (c)
|
|
1944 {
|
|
1945 case 'b':
|
|
1946 obj = current_buffer->name;
|
|
1947 #if 0
|
|
1948 if (maxwidth >= 3 && XSTRING (obj)->size > maxwidth)
|
|
1949 {
|
|
1950 bcopy (XSTRING (obj)->data, decode_mode_spec_buf, maxwidth - 1);
|
|
1951 decode_mode_spec_buf[maxwidth - 1] = '\\';
|
|
1952 decode_mode_spec_buf[maxwidth] = '\0';
|
|
1953 return decode_mode_spec_buf;
|
|
1954 }
|
|
1955 #endif
|
|
1956 break;
|
|
1957
|
|
1958 case 'f':
|
|
1959 obj = current_buffer->filename;
|
|
1960 #if 0
|
|
1961 if (NULL (obj))
|
|
1962 return "[none]";
|
|
1963 else if (XTYPE (obj) == Lisp_String && XSTRING (obj)->size > maxwidth)
|
|
1964 {
|
|
1965 bcopy ("...", decode_mode_spec_buf, 3);
|
|
1966 bcopy (XSTRING (obj)->data + XSTRING (obj)->size - maxwidth + 3,
|
|
1967 decode_mode_spec_buf + 3, maxwidth - 3);
|
|
1968 return decode_mode_spec_buf;
|
|
1969 }
|
|
1970 #endif
|
|
1971 break;
|
|
1972
|
|
1973 case 'm':
|
|
1974 obj = current_buffer->mode_name;
|
|
1975 break;
|
|
1976
|
|
1977 case 'n':
|
|
1978 if (BEGV > BEG || ZV < Z)
|
|
1979 return " Narrow";
|
|
1980 break;
|
|
1981
|
|
1982 case '*':
|
|
1983 if (!NULL (current_buffer->read_only))
|
|
1984 return "%";
|
|
1985 if (MODIFF > current_buffer->save_modified)
|
|
1986 return "*";
|
|
1987 return "-";
|
|
1988
|
|
1989 case 's':
|
|
1990 /* status of process */
|
|
1991 #ifdef subprocesses
|
|
1992 obj = Fget_buffer_process (Fcurrent_buffer ());
|
|
1993 if (NULL (obj))
|
|
1994 return "no process";
|
|
1995 obj = Fsymbol_name (Fprocess_status (obj));
|
|
1996 break;
|
|
1997 #else
|
|
1998 return "no processes";
|
|
1999 #endif /* subprocesses */
|
|
2000
|
|
2001 case 'p':
|
|
2002 {
|
|
2003 int pos = marker_position (w->start);
|
|
2004 int total = ZV - BEGV;
|
|
2005
|
|
2006 if (XFASTINT (w->window_end_pos) <= Z - ZV)
|
|
2007 {
|
|
2008 if (pos <= BEGV)
|
|
2009 return "All";
|
|
2010 else
|
|
2011 return "Bottom";
|
|
2012 }
|
|
2013 else if (pos <= BEGV)
|
|
2014 return "Top";
|
|
2015 else
|
|
2016 {
|
|
2017 total = ((pos - BEGV) * 100 + total - 1) / total;
|
|
2018 /* We can't normally display a 3-digit number,
|
|
2019 so get us a 2-digit number that is close. */
|
|
2020 if (total == 100)
|
|
2021 total = 99;
|
|
2022 sprintf (decode_mode_spec_buf, "%2d%%", total);
|
|
2023 return decode_mode_spec_buf;
|
|
2024 }
|
|
2025 }
|
|
2026
|
|
2027 case '%':
|
|
2028 return "%";
|
|
2029
|
|
2030 case '[':
|
|
2031 {
|
|
2032 int i;
|
|
2033 char *p;
|
|
2034
|
|
2035 if (command_loop_level > 5)
|
|
2036 return "[[[... ";
|
|
2037 p = decode_mode_spec_buf;
|
|
2038 for (i = 0; i < command_loop_level; i++)
|
|
2039 *p++ = '[';
|
|
2040 *p = 0;
|
|
2041 return decode_mode_spec_buf;
|
|
2042 }
|
|
2043
|
|
2044 case ']':
|
|
2045 {
|
|
2046 int i;
|
|
2047 char *p;
|
|
2048
|
|
2049 if (command_loop_level > 5)
|
|
2050 return " ...]]]";
|
|
2051 p = decode_mode_spec_buf;
|
|
2052 for (i = 0; i < command_loop_level; i++)
|
|
2053 *p++ = ']';
|
|
2054 *p = 0;
|
|
2055 return decode_mode_spec_buf;
|
|
2056 }
|
|
2057
|
|
2058 case '-':
|
|
2059 {
|
|
2060 static char lots_of_dashes[] = "--------------------------------------------------------------------------------------------------------------------------------------------";
|
|
2061 register char *p;
|
|
2062 register int i;
|
|
2063
|
|
2064 if (maxwidth < sizeof (lots_of_dashes))
|
|
2065 return lots_of_dashes;
|
|
2066 else
|
|
2067 {
|
|
2068 for (p = decode_mode_spec_buf, i = maxwidth; i > 0; i--)
|
|
2069 *p++ = '-';
|
|
2070 *p = '\0';
|
|
2071 }
|
|
2072 return decode_mode_spec_buf;
|
|
2073 }
|
|
2074 }
|
|
2075
|
|
2076 if (XTYPE (obj) == Lisp_String)
|
|
2077 return (char *) XSTRING (obj)->data;
|
|
2078 else
|
|
2079 return "";
|
|
2080 }
|
|
2081
|
|
2082 /* Display STRING on one line of window W, starting at HPOS.
|
|
2083 Display at position VPOS. Caller should have done get_display_line.
|
|
2084
|
|
2085 TRUNCATE is GLYPH to display at end if truncated. Zero for none.
|
|
2086
|
|
2087 MINCOL is the first column ok to end at. (Pad with spaces to this col.)
|
|
2088 MAXCOL is the last column ok to end at. Truncate here.
|
|
2089 -1 for MINCOL or MAXCOL means no explicit minimum or maximum.
|
|
2090 Both count from the left edge of the screen, as does HPOS.
|
|
2091 The right edge of W is an implicit maximum.
|
|
2092 If TRUNCATE is nonzero, the implicit maximum is one column before the edge.
|
|
2093
|
|
2094 Returns ending hpos */
|
|
2095
|
|
2096 static int
|
|
2097 display_string (w, vpos, string, hpos, truncate, mincol, maxcol)
|
|
2098 struct window *w;
|
|
2099 unsigned char *string;
|
|
2100 int vpos, hpos;
|
|
2101 GLYPH truncate;
|
|
2102 int mincol, maxcol;
|
|
2103 {
|
|
2104 register int c;
|
|
2105 register GLYPH *p1;
|
|
2106 int hscroll = XINT (w->hscroll);
|
|
2107 int tab_width = XINT (current_buffer->tab_width);
|
|
2108 register GLYPH *start;
|
|
2109 register GLYPH *end;
|
|
2110 struct screen_glyphs *desired_glyphs = SCREEN_DESIRED_GLYPHS (XSCREEN (w->screen));
|
|
2111 GLYPH *p1start = desired_glyphs->glyphs[vpos] + hpos;
|
|
2112 int window_width = XFASTINT (w->width);
|
|
2113
|
|
2114 /* Use the standard display table, not the window's display table.
|
|
2115 We don't want the mode line in rot13. */
|
|
2116 register struct Lisp_Vector *dp = 0;
|
|
2117
|
|
2118 if (XTYPE (Vstandard_display_table) == Lisp_Vector
|
|
2119 && XVECTOR (Vstandard_display_table)->size == DISP_TABLE_SIZE)
|
|
2120 dp = XVECTOR (Vstandard_display_table);
|
|
2121
|
|
2122 if (tab_width <= 0 || tab_width > 20) tab_width = 8;
|
|
2123
|
|
2124 p1 = p1start;
|
|
2125 start = desired_glyphs->glyphs[vpos] + XFASTINT (w->left);
|
|
2126 end = start + window_width - (truncate != 0);
|
|
2127
|
|
2128 if ((window_width + XFASTINT (w->left))
|
|
2129 != SCREEN_WIDTH (XSCREEN (WINDOW_SCREEN (w))))
|
|
2130 *end-- = '|';
|
|
2131
|
|
2132 if (maxcol >= 0 && end - desired_glyphs->glyphs[vpos] > maxcol)
|
|
2133 end = desired_glyphs->glyphs[vpos] + maxcol;
|
|
2134 if (maxcol >= 0 && mincol > maxcol)
|
|
2135 mincol = maxcol;
|
|
2136
|
|
2137 while (p1 < end)
|
|
2138 {
|
|
2139 c = *string++;
|
|
2140 if (!c) break;
|
|
2141 if (c >= 040 && c < 0177
|
|
2142 && (dp == 0 || XTYPE (DISP_CHAR_ROPE (dp, c)) != Lisp_String))
|
|
2143 {
|
|
2144 if (p1 >= start)
|
|
2145 *p1 = c;
|
|
2146 p1++;
|
|
2147 }
|
|
2148 else if (c == '\t')
|
|
2149 {
|
|
2150 do
|
|
2151 {
|
|
2152 if (p1 >= start && p1 < end)
|
|
2153 *p1 = SPACEGLYPH;
|
|
2154 p1++;
|
|
2155 }
|
|
2156 while ((p1 - start + hscroll - (hscroll > 0)) % tab_width);
|
|
2157 }
|
|
2158 else if (dp != 0 && XTYPE (DISP_CHAR_ROPE (dp, c)) == Lisp_String)
|
|
2159 p1 = copy_rope (p1, start, DISP_CHAR_ROPE (dp, c));
|
|
2160 else if (c < 0200 && buffer_defaults.ctl_arrow)
|
|
2161 {
|
|
2162 if (p1 >= start)
|
|
2163 *p1 = (dp && XTYPE (DISP_CTRL_GLYPH (dp)) == Lisp_Int
|
|
2164 ? XINT (DISP_CTRL_GLYPH (dp)) : '^');
|
|
2165 p1++;
|
|
2166 if (p1 >= start)
|
|
2167 *p1 = c ^ 0100;
|
|
2168 p1++;
|
|
2169 }
|
|
2170 else
|
|
2171 {
|
|
2172 if (p1 >= start)
|
|
2173 *p1 = (dp && XTYPE (DISP_ESCAPE_GLYPH (dp)) == Lisp_Int
|
|
2174 ? XINT (DISP_ESCAPE_GLYPH (dp)) : '\\');
|
|
2175 p1++;
|
|
2176 if (p1 >= start)
|
|
2177 *p1 = (c >> 6) + '0';
|
|
2178 p1++;
|
|
2179 if (p1 >= start)
|
|
2180 *p1 = (7 & (c >> 3)) + '0';
|
|
2181 p1++;
|
|
2182 if (p1 >= start)
|
|
2183 *p1 = (7 & c) + '0';
|
|
2184 p1++;
|
|
2185 }
|
|
2186 }
|
|
2187
|
|
2188 if (c)
|
|
2189 {
|
|
2190 p1 = end;
|
|
2191 if (truncate) *p1++ = truncate;
|
|
2192 }
|
|
2193 else if (mincol >= 0)
|
|
2194 {
|
|
2195 end = desired_glyphs->glyphs[vpos] + mincol;
|
|
2196 while (p1 < end)
|
|
2197 *p1++ = SPACEGLYPH;
|
|
2198 }
|
|
2199
|
|
2200 {
|
|
2201 register int len = p1 - desired_glyphs->glyphs[vpos];
|
|
2202
|
|
2203 if (len > desired_glyphs->used[vpos])
|
|
2204 desired_glyphs->used[vpos] = len;
|
|
2205 desired_glyphs->glyphs[vpos][desired_glyphs->used[vpos]] = 0;
|
|
2206
|
|
2207 return len;
|
|
2208 }
|
|
2209 }
|
|
2210
|
|
2211 void
|
|
2212 syms_of_xdisp ()
|
|
2213 {
|
|
2214 staticpro (&last_arrow_position);
|
|
2215 staticpro (&last_arrow_string);
|
|
2216 last_arrow_position = Qnil;
|
|
2217 last_arrow_string = Qnil;
|
|
2218
|
|
2219 DEFVAR_LISP ("global-mode-string", &Vglobal_mode_string,
|
|
2220 "String displayed by mode-line-format's \"%m\" specifiation.");
|
|
2221 Vglobal_mode_string = Qnil;
|
|
2222
|
|
2223 DEFVAR_LISP ("overlay-arrow-position", &Voverlay_arrow_position,
|
|
2224 "Marker for where to display an arrow on top of the buffer text.\n\
|
|
2225 This must be the beginning of a line in order to work.\n\
|
|
2226 See also `overlay-arrow-string'.");
|
|
2227 Voverlay_arrow_position = Qnil;
|
|
2228
|
|
2229 DEFVAR_LISP ("overlay-arrow-string", &Voverlay_arrow_string,
|
|
2230 "String to display as an arrow. See also `overlay-arrow-position'.");
|
|
2231 Voverlay_arrow_string = Qnil;
|
|
2232
|
|
2233 DEFVAR_INT ("scroll-step", &scroll_step,
|
|
2234 "*The number of lines to try scrolling a window by when point moves out.\n\
|
|
2235 If that fails to bring point back on screen, point is centered instead.\n\
|
|
2236 If this is zero, point is always centered after it moves off screen.");
|
|
2237
|
|
2238 DEFVAR_INT ("debug-end-pos", &debug_end_pos, "Don't ask");
|
|
2239
|
|
2240 DEFVAR_BOOL ("truncate-partial-width-windows",
|
|
2241 &truncate_partial_width_windows,
|
|
2242 "*Non-nil means truncate lines in all windows less than full screen wide.");
|
|
2243 truncate_partial_width_windows = 1;
|
|
2244
|
|
2245 DEFVAR_BOOL ("mode-line-inverse-video", &mode_line_inverse_video,
|
|
2246 "*Non-nil means use inverse video for the mode line.");
|
|
2247 mode_line_inverse_video = 1;
|
|
2248
|
|
2249 #ifndef MULTI_SCREEN
|
|
2250 defsubr (&Sredraw_display);
|
|
2251 #endif /* MULTI_SCREEN */
|
|
2252 }
|
|
2253
|
|
2254 /* initialize the window system */
|
|
2255 init_xdisp ()
|
|
2256 {
|
|
2257 Lisp_Object root_window;
|
|
2258 #ifndef COMPILER_REGISTER_BUG
|
|
2259 register
|
|
2260 #endif /* COMPILER_REGISTER_BUG */
|
|
2261 struct window *mini_w;
|
|
2262
|
|
2263 this_line_bufpos = 0;
|
|
2264
|
|
2265 mini_w = XWINDOW (minibuf_window);
|
|
2266 root_window = mini_w->prev;
|
|
2267
|
|
2268 echo_area_glyphs = 0;
|
|
2269 previous_echo_glyphs = 0;
|
|
2270
|
|
2271 if (!noninteractive)
|
|
2272 {
|
|
2273 SCREEN_PTR s = XSCREEN (WINDOW_SCREEN (XWINDOW (root_window)));
|
|
2274 XFASTINT (XWINDOW (root_window)->top) = 0;
|
|
2275 set_window_height (root_window, SCREEN_HEIGHT (s) - 1, 0);
|
|
2276 XFASTINT (mini_w->top) = SCREEN_HEIGHT (s) - 1;
|
|
2277 set_window_height (minibuf_window, 1, 0);
|
|
2278
|
|
2279 XFASTINT (XWINDOW (root_window)->width) = SCREEN_WIDTH (s);
|
|
2280 XFASTINT (mini_w->width) = SCREEN_WIDTH (s);
|
|
2281 }
|
|
2282 }
|