Mercurial > emacs
annotate src/getloadavg.c @ 11656:a40849041718
(union fail_stack_elt): New union.
(fail_stack_elt_t): Use that union.
(PUSH_PATTERN_OP, PUSH_FAILURE_POINTER, PUSH_FAILURE_INT)
(POP_FAILURE_POINTER, POP_FAILURE_INT): Corresponding changes.
(re_compile_fastmap): Corresponding changes.
(PUSH_FAILURE_ELT): New macro.
(FAIL_STACK_TOP): Macro deleted.
(WIDE_INT): Macro deleted.
(PUSH_FAILURE_POINT): Use PUSH_FAILURE_ELT.
(POP_FAILURE_ELT): New macro.
(POP_FAILURE_POINT): Use POP_FAILURE_ELT.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Tue, 02 May 1995 16:27:24 +0000 |
parents | f9f787d5e5ff |
children | 3a2d34fad6fb |
rev | line source |
---|---|
2928 | 1 /* Get the system load averages. |
10363 | 2 Copyright (C) 1985, 86, 87, 88, 89, 91, 92, 93, 1994, 1995 |
2928 | 3 Free Software Foundation, Inc. |
4 | |
5 This program is free software; you can redistribute it and/or modify | |
6 it under the terms of the GNU General Public License as published by | |
7 the Free Software Foundation; either version 2, or (at your option) | |
8 any later version. | |
9 | |
10 This program is distributed in the hope that it will be useful, | |
11 but WITHOUT ANY WARRANTY; without even the implied warranty of | |
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
13 GNU General Public License for more details. | |
14 | |
15 You should have received a copy of the GNU General Public License | |
16 along with this program; if not, write to the Free Software | |
17 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ | |
18 | |
19 /* Compile-time symbols that this file uses: | |
20 | |
21 FIXUP_KERNEL_SYMBOL_ADDR() Adjust address in returned struct nlist. | |
22 KERNEL_FILE Pathname of the kernel to nlist. | |
23 LDAV_CVT() Scale the load average from the kernel. | |
24 Returns a double. | |
25 LDAV_SYMBOL Name of kernel symbol giving load average. | |
26 LOAD_AVE_TYPE Type of the load average array in the kernel. | |
27 Must be defined unless one of | |
28 apollo, DGUX, NeXT, or UMAX is defined; | |
29 otherwise, no load average is available. | |
30 NLIST_STRUCT Include nlist.h, not a.out.h, and | |
31 the nlist n_name element is a pointer, | |
32 not an array. | |
33 NLIST_NAME_UNION struct nlist has an n_un member, not n_name. | |
4349 | 34 LINUX_LDAV_FILE [__linux__]: File containing load averages. |
2928 | 35 |
36 Specific system predefines this file uses, aside from setting | |
37 default values if not emacs: | |
38 | |
39 apollo | |
40 BSD Real BSD, not just BSD-like. | |
41 DGUX | |
42 eunice UNIX emulator under VMS. | |
43 hpux | |
44 NeXT | |
45 sgi | |
46 sequent Sequent Dynix 3.x.x (BSD) | |
47 _SEQUENT_ Sequent DYNIX/ptx 1.x.x (SYSV) | |
48 sony_news NEWS-OS (works at least for 4.1C) | |
49 UMAX | |
50 UMAX4_3 | |
51 VMS | |
4349 | 52 __linux__ Linux: assumes /proc filesystem mounted. |
2928 | 53 Support from Michael K. Johnson. |
4807 | 54 __NetBSD__ NetBSD: assumes /kern filesystem mounted. |
2928 | 55 |
56 In addition, to avoid nesting many #ifdefs, we internally set | |
57 LDAV_DONE to indicate that the load average has been computed. | |
58 | |
59 We also #define LDAV_PRIVILEGED if a program will require | |
60 special installation to be able to call getloadavg. */ | |
61 | |
10363 | 62 /* This should always be first. */ |
63 #ifdef HAVE_CONFIG_H | |
64 #include <config.h> | |
65 #endif | |
66 | |
2928 | 67 #include <sys/types.h> |
68 | |
69 /* Both the Emacs and non-Emacs sections want this. Some | |
70 configuration files' definitions for the LOAD_AVE_CVT macro (like | |
71 sparc.h's) use macros like FSCALE, defined here. */ | |
72 #ifdef unix | |
73 #include <sys/param.h> | |
74 #endif | |
75 | |
76 | |
7784
fd03010db0c6
Put #include of errno.h and decl of errno before #ifndef HAVE_GETLOADAVG.
Roland McGrath <roland@gnu.org>
parents:
4907
diff
changeset
|
77 /* Exclude all the code except the test program at the end |
fd03010db0c6
Put #include of errno.h and decl of errno before #ifndef HAVE_GETLOADAVG.
Roland McGrath <roland@gnu.org>
parents:
4907
diff
changeset
|
78 if the system has its own `getloadavg' function. |
4409 | 79 |
7784
fd03010db0c6
Put #include of errno.h and decl of errno before #ifndef HAVE_GETLOADAVG.
Roland McGrath <roland@gnu.org>
parents:
4907
diff
changeset
|
80 The declaration of `errno' is needed by the test program |
fd03010db0c6
Put #include of errno.h and decl of errno before #ifndef HAVE_GETLOADAVG.
Roland McGrath <roland@gnu.org>
parents:
4907
diff
changeset
|
81 as well as the function itself, so it comes first. */ |
fd03010db0c6
Put #include of errno.h and decl of errno before #ifndef HAVE_GETLOADAVG.
Roland McGrath <roland@gnu.org>
parents:
4907
diff
changeset
|
82 |
fd03010db0c6
Put #include of errno.h and decl of errno before #ifndef HAVE_GETLOADAVG.
Roland McGrath <roland@gnu.org>
parents:
4907
diff
changeset
|
83 #include <errno.h> |
fd03010db0c6
Put #include of errno.h and decl of errno before #ifndef HAVE_GETLOADAVG.
Roland McGrath <roland@gnu.org>
parents:
4907
diff
changeset
|
84 |
fd03010db0c6
Put #include of errno.h and decl of errno before #ifndef HAVE_GETLOADAVG.
Roland McGrath <roland@gnu.org>
parents:
4907
diff
changeset
|
85 #ifndef errno |
fd03010db0c6
Put #include of errno.h and decl of errno before #ifndef HAVE_GETLOADAVG.
Roland McGrath <roland@gnu.org>
parents:
4907
diff
changeset
|
86 extern int errno; |
fd03010db0c6
Put #include of errno.h and decl of errno before #ifndef HAVE_GETLOADAVG.
Roland McGrath <roland@gnu.org>
parents:
4907
diff
changeset
|
87 #endif |
4409 | 88 |
89 #ifndef HAVE_GETLOADAVG | |
90 | |
91 | |
2928 | 92 /* The existing Emacs configuration files define a macro called |
93 LOAD_AVE_CVT, which accepts a value of type LOAD_AVE_TYPE, and | |
94 returns the load average multiplied by 100. What we actually want | |
95 is a macro called LDAV_CVT, which returns the load average as an | |
96 unmultiplied double. | |
97 | |
98 For backwards compatibility, we'll define LDAV_CVT in terms of | |
99 LOAD_AVE_CVT, but future machine config files should just define | |
100 LDAV_CVT directly. */ | |
101 | |
102 #if !defined(LDAV_CVT) && defined(LOAD_AVE_CVT) | |
103 #define LDAV_CVT(n) (LOAD_AVE_CVT (n) / 100.0) | |
104 #endif | |
105 | |
106 #if !defined (BSD) && defined (ultrix) | |
107 /* Ultrix behaves like BSD on Vaxen. */ | |
108 #define BSD | |
109 #endif | |
110 | |
111 #ifdef NeXT | |
112 /* NeXT in the 2.{0,1,2} releases defines BSD in <sys/param.h>, which | |
113 conflicts with the definition understood in this file, that this | |
114 really is BSD. */ | |
115 #undef BSD | |
116 | |
117 /* NeXT defines FSCALE in <sys/param.h>. However, we take FSCALE being | |
118 defined to mean that the nlist method should be used, which is not true. */ | |
119 #undef FSCALE | |
120 #endif | |
121 | |
122 /* Set values that are different from the defaults, which are | |
123 set a little farther down with #ifndef. */ | |
124 | |
125 | |
126 /* Some shorthands. */ | |
127 | |
128 #if defined (HPUX) && !defined (hpux) | |
129 #define hpux | |
130 #endif | |
131 | |
132 #if defined(hp300) && !defined(hpux) | |
133 #define MORE_BSD | |
134 #endif | |
135 | |
136 #if defined(ultrix) && defined(mips) | |
137 #define decstation | |
138 #endif | |
139 | |
140 #if defined(sun) && defined(SVR4) | |
141 #define SUNOS_5 | |
142 #endif | |
143 | |
4296 | 144 #if defined (__osf__) && (defined (__alpha) || defined (__alpha__)) |
2928 | 145 #define OSF_ALPHA |
8816
fbc29f1ddd08
(getloadavg): Add OSF_ALPHA support.
Richard M. Stallman <rms@gnu.org>
parents:
7784
diff
changeset
|
146 #include <sys/table.h> |
2928 | 147 #endif |
148 | |
149 #if defined (__osf__) && (defined (mips) || defined (__mips__)) | |
150 #define OSF_MIPS | |
151 #include <sys/table.h> | |
152 #endif | |
153 | |
154 /* UTek's /bin/cc on the 4300 has no architecture specific cpp define by | |
155 default, but _MACH_IND_SYS_TYPES is defined in <sys/types.h>. Combine | |
156 that with a couple of other things and we'll have a unique match. */ | |
157 #if !defined (tek4300) && defined (unix) && defined (m68k) && defined (mc68000) && defined (mc68020) && defined (_MACH_IND_SYS_TYPES) | |
158 #define tek4300 /* Define by emacs, but not by other users. */ | |
159 #endif | |
160 | |
161 | |
3587 | 162 /* VAX C can't handle multi-line #ifs, or lines longer than 256 chars. */ |
3597 | 163 #ifndef LOAD_AVE_TYPE |
164 | |
3587 | 165 #ifdef MORE_BSD |
166 #define LOAD_AVE_TYPE long | |
167 #endif | |
168 | |
169 #ifdef sun | |
170 #define LOAD_AVE_TYPE long | |
171 #endif | |
172 | |
173 #ifdef decstation | |
174 #define LOAD_AVE_TYPE long | |
175 #endif | |
176 | |
177 #ifdef _SEQUENT_ | |
178 #define LOAD_AVE_TYPE long | |
179 #endif | |
180 | |
181 #ifdef sgi | |
182 #define LOAD_AVE_TYPE long | |
183 #endif | |
184 | |
185 #ifdef SVR4 | |
186 #define LOAD_AVE_TYPE long | |
187 #endif | |
188 | |
189 #ifdef sony_news | |
190 #define LOAD_AVE_TYPE long | |
191 #endif | |
192 | |
193 #ifdef sequent | |
194 #define LOAD_AVE_TYPE long | |
195 #endif | |
196 | |
197 #ifdef OSF_ALPHA | |
198 #define LOAD_AVE_TYPE long | |
199 #endif | |
200 | |
3597 | 201 #if defined (ardent) && defined (titan) |
3587 | 202 #define LOAD_AVE_TYPE long |
203 #endif | |
204 | |
3597 | 205 #ifdef tek4300 |
2928 | 206 #define LOAD_AVE_TYPE long |
207 #endif | |
208 | |
9172
393a55341859
[alliant && i860] (LOAD_AVE_TYPE, FSCALE, NLIST_STRUCT): Define.
Roland McGrath <roland@gnu.org>
parents:
9096
diff
changeset
|
209 #if defined(alliant) && defined(i860) /* Alliant FX/2800 */ |
393a55341859
[alliant && i860] (LOAD_AVE_TYPE, FSCALE, NLIST_STRUCT): Define.
Roland McGrath <roland@gnu.org>
parents:
9096
diff
changeset
|
210 #define LOAD_AVE_TYPE long |
393a55341859
[alliant && i860] (LOAD_AVE_TYPE, FSCALE, NLIST_STRUCT): Define.
Roland McGrath <roland@gnu.org>
parents:
9096
diff
changeset
|
211 #endif |
393a55341859
[alliant && i860] (LOAD_AVE_TYPE, FSCALE, NLIST_STRUCT): Define.
Roland McGrath <roland@gnu.org>
parents:
9096
diff
changeset
|
212 |
3597 | 213 #endif /* No LOAD_AVE_TYPE. */ |
2928 | 214 |
4422 | 215 #ifdef OSF_ALPHA |
216 /* <sys/param.h> defines an incorrect value for FSCALE on Alpha OSF/1, | |
217 according to ghazi@noc.rutgers.edu. */ | |
218 #undef FSCALE | |
219 #define FSCALE 1024.0 | |
220 #endif | |
221 | |
9723
ba541f60aa46
[alliant && i860] (FSCALE): Move defn before #ifndef FSCALE.
Roland McGrath <roland@gnu.org>
parents:
9172
diff
changeset
|
222 #if defined(alliant) && defined(i860) /* Alliant FX/2800 */ |
ba541f60aa46
[alliant && i860] (FSCALE): Move defn before #ifndef FSCALE.
Roland McGrath <roland@gnu.org>
parents:
9172
diff
changeset
|
223 /* <sys/param.h> defines an incorrect value for FSCALE on an |
ba541f60aa46
[alliant && i860] (FSCALE): Move defn before #ifndef FSCALE.
Roland McGrath <roland@gnu.org>
parents:
9172
diff
changeset
|
224 Alliant FX/2800 Concentrix 2.2, according to ghazi@noc.rutgers.edu. */ |
ba541f60aa46
[alliant && i860] (FSCALE): Move defn before #ifndef FSCALE.
Roland McGrath <roland@gnu.org>
parents:
9172
diff
changeset
|
225 #undef FSCALE |
ba541f60aa46
[alliant && i860] (FSCALE): Move defn before #ifndef FSCALE.
Roland McGrath <roland@gnu.org>
parents:
9172
diff
changeset
|
226 #define FSCALE 100.0 |
ba541f60aa46
[alliant && i860] (FSCALE): Move defn before #ifndef FSCALE.
Roland McGrath <roland@gnu.org>
parents:
9172
diff
changeset
|
227 #endif |
ba541f60aa46
[alliant && i860] (FSCALE): Move defn before #ifndef FSCALE.
Roland McGrath <roland@gnu.org>
parents:
9172
diff
changeset
|
228 |
4422 | 229 |
2928 | 230 #ifndef FSCALE |
231 | |
232 /* SunOS and some others define FSCALE in sys/param.h. */ | |
233 | |
234 #ifdef MORE_BSD | |
235 #define FSCALE 2048.0 | |
236 #endif | |
237 | |
238 #if defined(MIPS) || defined(SVR4) || defined(decstation) | |
239 #define FSCALE 256 | |
240 #endif | |
241 | |
242 #if defined (sgi) || defined (sequent) | |
4288 | 243 /* Sometimes both MIPS and sgi are defined, so FSCALE was just defined |
244 above under #ifdef MIPS. But we want the sgi value. */ | |
245 #undef FSCALE | |
2928 | 246 #define FSCALE 1000.0 |
247 #endif | |
248 | |
249 #if defined (ardent) && defined (titan) | |
250 #define FSCALE 65536.0 | |
251 #endif | |
252 | |
253 #ifdef tek4300 | |
254 #define FSCALE 100.0 | |
255 #endif | |
256 | |
257 #endif /* Not FSCALE. */ | |
258 | |
259 #if !defined (LDAV_CVT) && defined (FSCALE) | |
260 #define LDAV_CVT(n) (((double) (n)) / FSCALE) | |
261 #endif | |
262 | |
3587 | 263 /* VAX C can't handle multi-line #ifs, or lines longer that 256 characters. */ |
264 #ifndef NLIST_STRUCT | |
265 | |
266 #ifdef MORE_BSD | |
267 #define NLIST_STRUCT | |
268 #endif | |
269 | |
270 #ifdef sun | |
271 #define NLIST_STRUCT | |
272 #endif | |
273 | |
274 #ifdef decstation | |
275 #define NLIST_STRUCT | |
276 #endif | |
277 | |
278 #ifdef hpux | |
279 #define NLIST_STRUCT | |
280 #endif | |
281 | |
282 #if defined (_SEQUENT_) || defined (sequent) | |
283 #define NLIST_STRUCT | |
284 #endif | |
285 | |
286 #ifdef sgi | |
2928 | 287 #define NLIST_STRUCT |
288 #endif | |
289 | |
3587 | 290 #ifdef SVR4 |
291 #define NLIST_STRUCT | |
292 #endif | |
293 | |
294 #ifdef sony_news | |
295 #define NLIST_STRUCT | |
296 #endif | |
297 | |
298 #ifdef OSF_ALPHA | |
299 #define NLIST_STRUCT | |
300 #endif | |
301 | |
302 #if defined (ardent) && defined (titan) | |
303 #define NLIST_STRUCT | |
304 #endif | |
305 | |
9172
393a55341859
[alliant && i860] (LOAD_AVE_TYPE, FSCALE, NLIST_STRUCT): Define.
Roland McGrath <roland@gnu.org>
parents:
9096
diff
changeset
|
306 #ifdef tek4300 |
3587 | 307 #define NLIST_STRUCT |
308 #endif | |
309 | |
310 #ifdef butterfly | |
311 #define NLIST_STRUCT | |
312 #endif | |
313 | |
9172
393a55341859
[alliant && i860] (LOAD_AVE_TYPE, FSCALE, NLIST_STRUCT): Define.
Roland McGrath <roland@gnu.org>
parents:
9096
diff
changeset
|
314 #if defined(alliant) && defined(i860) /* Alliant FX/2800 */ |
393a55341859
[alliant && i860] (LOAD_AVE_TYPE, FSCALE, NLIST_STRUCT): Define.
Roland McGrath <roland@gnu.org>
parents:
9096
diff
changeset
|
315 #define NLIST_STRUCT |
393a55341859
[alliant && i860] (LOAD_AVE_TYPE, FSCALE, NLIST_STRUCT): Define.
Roland McGrath <roland@gnu.org>
parents:
9096
diff
changeset
|
316 #endif |
393a55341859
[alliant && i860] (LOAD_AVE_TYPE, FSCALE, NLIST_STRUCT): Define.
Roland McGrath <roland@gnu.org>
parents:
9096
diff
changeset
|
317 |
3587 | 318 #endif /* defined (NLIST_STRUCT) */ |
319 | |
2928 | 320 |
321 #if defined(sgi) || (defined(mips) && !defined(BSD)) | |
322 #define FIXUP_KERNEL_SYMBOL_ADDR(nl) ((nl)[0].n_value &= ~(1 << 31)) | |
323 #endif | |
324 | |
325 | |
326 #if !defined (KERNEL_FILE) && defined (sequent) | |
327 #define KERNEL_FILE "/dynix" | |
328 #endif | |
329 | |
330 #if !defined (KERNEL_FILE) && defined (hpux) | |
331 #define KERNEL_FILE "/hp-ux" | |
332 #endif | |
333 | |
334 #if !defined(KERNEL_FILE) && (defined(_SEQUENT_) || defined(MIPS) || defined(SVR4) || defined(ISC) || defined (sgi) || defined(SVR4) || (defined (ardent) && defined (titan))) | |
335 #define KERNEL_FILE "/unix" | |
336 #endif | |
337 | |
338 | |
339 #if !defined (LDAV_SYMBOL) && defined (alliant) | |
340 #define LDAV_SYMBOL "_Loadavg" | |
341 #endif | |
342 | |
343 #if !defined(LDAV_SYMBOL) && ((defined(hpux) && !defined(hp9000s300)) || defined(_SEQUENT_) || defined(SVR4) || defined(ISC) || defined(sgi) || (defined (ardent) && defined (titan))) | |
344 #define LDAV_SYMBOL "avenrun" | |
345 #endif | |
346 | |
347 #ifdef HAVE_UNISTD_H | |
348 #include <unistd.h> | |
349 #endif | |
350 | |
351 #include <stdio.h> | |
352 | |
353 /* LOAD_AVE_TYPE should only get defined if we're going to use the | |
354 nlist method. */ | |
355 #if !defined(LOAD_AVE_TYPE) && (defined(BSD) || defined(LDAV_CVT) || defined(KERNEL_FILE) || defined(LDAV_SYMBOL)) | |
356 #define LOAD_AVE_TYPE double | |
357 #endif | |
358 | |
359 #ifdef LOAD_AVE_TYPE | |
360 | |
361 #ifndef VMS | |
362 #ifndef NLIST_STRUCT | |
363 #include <a.out.h> | |
364 #else /* NLIST_STRUCT */ | |
365 #include <nlist.h> | |
366 #endif /* NLIST_STRUCT */ | |
367 | |
368 #ifdef SUNOS_5 | |
369 #include <fcntl.h> | |
370 #include <kvm.h> | |
371 #endif | |
372 | |
373 #ifndef KERNEL_FILE | |
374 #define KERNEL_FILE "/vmunix" | |
375 #endif /* KERNEL_FILE */ | |
376 | |
377 #ifndef LDAV_SYMBOL | |
378 #define LDAV_SYMBOL "_avenrun" | |
379 #endif /* LDAV_SYMBOL */ | |
380 | |
381 #else /* VMS */ | |
382 | |
383 #ifndef eunice | |
384 #include <iodef.h> | |
385 #include <descrip.h> | |
386 #else /* eunice */ | |
387 #include <vms/iodef.h> | |
388 #endif /* eunice */ | |
389 #endif /* VMS */ | |
390 | |
391 #ifndef LDAV_CVT | |
392 #define LDAV_CVT(n) ((double) (n)) | |
393 #endif /* !LDAV_CVT */ | |
394 | |
395 #endif /* LOAD_AVE_TYPE */ | |
396 | |
397 #ifdef NeXT | |
398 #ifdef HAVE_MACH_MACH_H | |
399 #include <mach/mach.h> | |
400 #else | |
401 #include <mach.h> | |
402 #endif | |
403 #endif /* NeXT */ | |
404 | |
405 #ifdef sgi | |
406 #include <sys/sysmp.h> | |
407 #endif /* sgi */ | |
408 | |
409 #ifdef UMAX | |
410 #include <stdio.h> | |
411 #include <signal.h> | |
412 #include <sys/time.h> | |
413 #include <sys/wait.h> | |
414 #include <sys/syscall.h> | |
415 | |
416 #ifdef UMAX_43 | |
417 #include <machine/cpu.h> | |
418 #include <inq_stats/statistics.h> | |
419 #include <inq_stats/sysstats.h> | |
420 #include <inq_stats/cpustats.h> | |
421 #include <inq_stats/procstats.h> | |
422 #else /* Not UMAX_43. */ | |
423 #include <sys/sysdefs.h> | |
424 #include <sys/statistics.h> | |
425 #include <sys/sysstats.h> | |
426 #include <sys/cpudefs.h> | |
427 #include <sys/cpustats.h> | |
428 #include <sys/procstats.h> | |
429 #endif /* Not UMAX_43. */ | |
430 #endif /* UMAX */ | |
431 | |
432 #ifdef DGUX | |
433 #include <sys/dg_sys_info.h> | |
434 #endif | |
435 | |
436 #if defined(HAVE_FCNTL_H) || defined(_POSIX_VERSION) | |
437 #include <fcntl.h> | |
438 #else | |
439 #include <sys/file.h> | |
440 #endif | |
441 | |
442 /* Avoid static vars inside a function since in HPUX they dump as pure. */ | |
443 | |
444 #ifdef NeXT | |
445 static processor_set_t default_set; | |
446 static int getloadavg_initialized; | |
447 #endif /* NeXT */ | |
448 | |
449 #ifdef UMAX | |
450 static unsigned int cpus = 0; | |
451 static unsigned int samples; | |
452 #endif /* UMAX */ | |
453 | |
454 #ifdef DGUX | |
455 static struct dg_sys_info_load_info load_info; /* what-a-mouthful! */ | |
456 #endif /* DGUX */ | |
457 | |
458 #ifdef LOAD_AVE_TYPE | |
459 /* File descriptor open to /dev/kmem or VMS load ave driver. */ | |
460 static int channel; | |
461 /* Nonzero iff channel is valid. */ | |
462 static int getloadavg_initialized; | |
463 /* Offset in kmem to seek to read load average, or 0 means invalid. */ | |
464 static long offset; | |
465 | |
466 #if !defined(VMS) && !defined(sgi) | |
467 static struct nlist nl[2]; | |
468 #endif /* Not VMS or sgi */ | |
469 | |
470 #ifdef SUNOS_5 | |
471 static kvm_t *kd; | |
472 #endif /* SUNOS_5 */ | |
473 | |
474 #endif /* LOAD_AVE_TYPE */ | |
475 | |
476 /* Put the 1 minute, 5 minute and 15 minute load averages | |
477 into the first NELEM elements of LOADAVG. | |
4064
d14ba65a1363
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
4011
diff
changeset
|
478 Return the number written (never more than 3, but may be less than NELEM), |
2928 | 479 or -1 if an error occurred. */ |
480 | |
481 int | |
482 getloadavg (loadavg, nelem) | |
483 double loadavg[]; | |
484 int nelem; | |
485 { | |
486 int elem = 0; /* Return value. */ | |
487 | |
3037 | 488 #ifdef NO_GET_LOAD_AVG |
489 #define LDAV_DONE | |
490 /* Set errno to zero to indicate that there was no particular error; | |
491 this function just can't work at all on this system. */ | |
492 errno = 0; | |
493 elem = -1; | |
494 #endif | |
495 | |
4349 | 496 #if !defined (LDAV_DONE) && defined (__linux__) |
2928 | 497 #define LDAV_DONE |
498 #undef LOAD_AVE_TYPE | |
499 | |
500 #ifndef LINUX_LDAV_FILE | |
501 #define LINUX_LDAV_FILE "/proc/loadavg" | |
502 #endif | |
503 | |
504 char ldavgbuf[40]; | |
505 double load_ave[3]; | |
506 int fd, count; | |
507 | |
508 fd = open (LINUX_LDAV_FILE, O_RDONLY); | |
509 if (fd == -1) | |
510 return -1; | |
511 count = read (fd, ldavgbuf, 40); | |
512 (void) close (fd); | |
513 if (count <= 0) | |
514 return -1; | |
515 | |
516 count = sscanf (ldavgbuf, "%lf %lf %lf", | |
517 &load_ave[0], &load_ave[1], &load_ave[2]); | |
518 if (count < 1) | |
519 return -1; | |
520 | |
521 for (elem = 0; elem < nelem && elem < count; elem++) | |
522 loadavg[elem] = load_ave[elem]; | |
523 | |
524 return elem; | |
525 | |
4349 | 526 #endif /* __linux__ */ |
2928 | 527 |
4807 | 528 #if !defined (LDAV_DONE) && defined (__NetBSD__) |
529 #define LDAV_DONE | |
530 #undef LOAD_AVE_TYPE | |
531 | |
532 #ifndef NETBSD_LDAV_FILE | |
533 #define NETBSD_LDAV_FILE "/kern/loadavg" | |
534 #endif | |
535 | |
536 unsigned long int load_ave[3], scale; | |
537 int count; | |
538 FILE *fp; | |
539 | |
4907 | 540 fp = fopen (NETBSD_LDAV_FILE, "r"); |
4807 | 541 if (fp == NULL) |
542 return -1; | |
543 count = fscanf (fp, "%lu %lu %lu %lu\n", | |
544 &load_ave[0], &load_ave[1], &load_ave[2], | |
545 &scale); | |
546 (void) fclose (fp); | |
547 if (count != 4) | |
548 return -1; | |
549 | |
550 for (elem = 0; elem < nelem; elem++) | |
551 loadavg[elem] = (double) load_ave[elem] / (double) scale; | |
552 | |
553 return elem; | |
554 | |
555 #endif /* __NetBSD__ */ | |
556 | |
2928 | 557 #if !defined (LDAV_DONE) && defined (NeXT) |
558 #define LDAV_DONE | |
559 /* The NeXT code was adapted from iscreen 3.2. */ | |
560 | |
561 host_t host; | |
562 struct processor_set_basic_info info; | |
563 unsigned info_count; | |
564 | |
4064
d14ba65a1363
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
4011
diff
changeset
|
565 /* We only know how to get the 1-minute average for this system, |
d14ba65a1363
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
4011
diff
changeset
|
566 so even if the caller asks for more than 1, we only return 1. */ |
2928 | 567 |
568 if (!getloadavg_initialized) | |
569 { | |
570 if (processor_set_default (host_self (), &default_set) == KERN_SUCCESS) | |
571 getloadavg_initialized = 1; | |
572 } | |
573 | |
574 if (getloadavg_initialized) | |
575 { | |
576 info_count = PROCESSOR_SET_BASIC_INFO_COUNT; | |
577 if (processor_set_info (default_set, PROCESSOR_SET_BASIC_INFO, &host, | |
578 (processor_set_info_t) &info, &info_count) | |
579 != KERN_SUCCESS) | |
580 getloadavg_initialized = 0; | |
581 else | |
582 { | |
583 if (nelem > 0) | |
584 loadavg[elem++] = (double) info.load_average / LOAD_SCALE; | |
585 } | |
586 } | |
587 | |
588 if (!getloadavg_initialized) | |
589 return -1; | |
590 #endif /* NeXT */ | |
591 | |
592 #if !defined (LDAV_DONE) && defined (UMAX) | |
593 #define LDAV_DONE | |
594 /* UMAX 4.2, which runs on the Encore Multimax multiprocessor, does not | |
595 have a /dev/kmem. Information about the workings of the running kernel | |
596 can be gathered with inq_stats system calls. | |
597 We only know how to get the 1-minute average for this system. */ | |
598 | |
599 struct proc_summary proc_sum_data; | |
600 struct stat_descr proc_info; | |
601 double load; | |
602 register unsigned int i, j; | |
603 | |
604 if (cpus == 0) | |
605 { | |
606 register unsigned int c, i; | |
607 struct cpu_config conf; | |
608 struct stat_descr desc; | |
609 | |
610 desc.sd_next = 0; | |
611 desc.sd_subsys = SUBSYS_CPU; | |
612 desc.sd_type = CPUTYPE_CONFIG; | |
613 desc.sd_addr = (char *) &conf; | |
614 desc.sd_size = sizeof conf; | |
615 | |
616 if (inq_stats (1, &desc)) | |
617 return -1; | |
618 | |
619 c = 0; | |
620 for (i = 0; i < conf.config_maxclass; ++i) | |
621 { | |
622 struct class_stats stats; | |
623 bzero ((char *) &stats, sizeof stats); | |
624 | |
625 desc.sd_type = CPUTYPE_CLASS; | |
626 desc.sd_objid = i; | |
627 desc.sd_addr = (char *) &stats; | |
628 desc.sd_size = sizeof stats; | |
629 | |
630 if (inq_stats (1, &desc)) | |
631 return -1; | |
632 | |
633 c += stats.class_numcpus; | |
634 } | |
635 cpus = c; | |
636 samples = cpus < 2 ? 3 : (2 * cpus / 3); | |
637 } | |
638 | |
639 proc_info.sd_next = 0; | |
640 proc_info.sd_subsys = SUBSYS_PROC; | |
641 proc_info.sd_type = PROCTYPE_SUMMARY; | |
642 proc_info.sd_addr = (char *) &proc_sum_data; | |
643 proc_info.sd_size = sizeof (struct proc_summary); | |
644 proc_info.sd_sizeused = 0; | |
645 | |
646 if (inq_stats (1, &proc_info) != 0) | |
647 return -1; | |
648 | |
649 load = proc_sum_data.ps_nrunnable; | |
650 j = 0; | |
651 for (i = samples - 1; i > 0; --i) | |
652 { | |
653 load += proc_sum_data.ps_nrun[j]; | |
654 if (j++ == PS_NRUNSIZE) | |
655 j = 0; | |
656 } | |
657 | |
658 if (nelem > 0) | |
659 loadavg[elem++] = load / samples / cpus; | |
660 #endif /* UMAX */ | |
661 | |
662 #if !defined (LDAV_DONE) && defined (DGUX) | |
663 #define LDAV_DONE | |
664 /* This call can return -1 for an error, but with good args | |
665 it's not supposed to fail. The first argument is for no | |
666 apparent reason of type `long int *'. */ | |
667 dg_sys_info ((long int *) &load_info, | |
668 DG_SYS_INFO_LOAD_INFO_TYPE, | |
669 DG_SYS_INFO_LOAD_VERSION_0); | |
670 | |
671 if (nelem > 0) | |
672 loadavg[elem++] = load_info.one_minute; | |
673 if (nelem > 1) | |
674 loadavg[elem++] = load_info.five_minute; | |
675 if (nelem > 2) | |
676 loadavg[elem++] = load_info.fifteen_minute; | |
677 #endif /* DGUX */ | |
678 | |
679 #if !defined (LDAV_DONE) && defined (apollo) | |
680 #define LDAV_DONE | |
681 /* Apollo code from lisch@mentorg.com (Ray Lischner). | |
682 | |
683 This system call is not documented. The load average is obtained as | |
684 three long integers, for the load average over the past minute, | |
685 five minutes, and fifteen minutes. Each value is a scaled integer, | |
686 with 16 bits of integer part and 16 bits of fraction part. | |
687 | |
688 I'm not sure which operating system first supported this system call, | |
689 but I know that SR10.2 supports it. */ | |
690 | |
691 extern void proc1_$get_loadav (); | |
692 unsigned long load_ave[3]; | |
693 | |
694 proc1_$get_loadav (load_ave); | |
695 | |
696 if (nelem > 0) | |
697 loadavg[elem++] = load_ave[0] / 65536.0; | |
698 if (nelem > 1) | |
699 loadavg[elem++] = load_ave[1] / 65536.0; | |
700 if (nelem > 2) | |
701 loadavg[elem++] = load_ave[2] / 65536.0; | |
702 #endif /* apollo */ | |
703 | |
704 #if !defined (LDAV_DONE) && defined (OSF_MIPS) | |
705 #define LDAV_DONE | |
706 | |
707 struct tbl_loadavg load_ave; | |
708 table (TBL_LOADAVG, 0, &load_ave, 1, sizeof (load_ave)); | |
3037 | 709 loadavg[elem++] |
710 = (load_ave.tl_lscale == 0 | |
711 ? load_ave.tl_avenrun.d[0] | |
712 : (load_ave.tl_avenrun.l[0] / (double) load_ave.tl_lscale)); | |
2928 | 713 #endif /* OSF_MIPS */ |
714 | |
8816
fbc29f1ddd08
(getloadavg): Add OSF_ALPHA support.
Richard M. Stallman <rms@gnu.org>
parents:
7784
diff
changeset
|
715 #if !defined (LDAV_DONE) && defined (OSF_ALPHA) |
fbc29f1ddd08
(getloadavg): Add OSF_ALPHA support.
Richard M. Stallman <rms@gnu.org>
parents:
7784
diff
changeset
|
716 #define LDAV_DONE |
fbc29f1ddd08
(getloadavg): Add OSF_ALPHA support.
Richard M. Stallman <rms@gnu.org>
parents:
7784
diff
changeset
|
717 |
fbc29f1ddd08
(getloadavg): Add OSF_ALPHA support.
Richard M. Stallman <rms@gnu.org>
parents:
7784
diff
changeset
|
718 struct tbl_loadavg load_ave; |
fbc29f1ddd08
(getloadavg): Add OSF_ALPHA support.
Richard M. Stallman <rms@gnu.org>
parents:
7784
diff
changeset
|
719 table (TBL_LOADAVG, 0, &load_ave, 1, sizeof (load_ave)); |
fbc29f1ddd08
(getloadavg): Add OSF_ALPHA support.
Richard M. Stallman <rms@gnu.org>
parents:
7784
diff
changeset
|
720 for (elem = 0; elem < nelem; elem++) |
fbc29f1ddd08
(getloadavg): Add OSF_ALPHA support.
Richard M. Stallman <rms@gnu.org>
parents:
7784
diff
changeset
|
721 loadavg[elem] |
fbc29f1ddd08
(getloadavg): Add OSF_ALPHA support.
Richard M. Stallman <rms@gnu.org>
parents:
7784
diff
changeset
|
722 = (load_ave.tl_lscale == 0 |
fbc29f1ddd08
(getloadavg): Add OSF_ALPHA support.
Richard M. Stallman <rms@gnu.org>
parents:
7784
diff
changeset
|
723 ? load_ave.tl_avenrun.d[elem] |
fbc29f1ddd08
(getloadavg): Add OSF_ALPHA support.
Richard M. Stallman <rms@gnu.org>
parents:
7784
diff
changeset
|
724 : (load_ave.tl_avenrun.l[elem] / (double) load_ave.tl_lscale)); |
fbc29f1ddd08
(getloadavg): Add OSF_ALPHA support.
Richard M. Stallman <rms@gnu.org>
parents:
7784
diff
changeset
|
725 #endif /* OSF_ALPHA */ |
fbc29f1ddd08
(getloadavg): Add OSF_ALPHA support.
Richard M. Stallman <rms@gnu.org>
parents:
7784
diff
changeset
|
726 |
2928 | 727 #if !defined (LDAV_DONE) && defined (VMS) |
728 /* VMS specific code -- read from the Load Ave driver. */ | |
729 | |
730 LOAD_AVE_TYPE load_ave[3]; | |
731 static int getloadavg_initialized = 0; | |
732 #ifdef eunice | |
733 struct | |
734 { | |
735 int dsc$w_length; | |
736 char *dsc$a_pointer; | |
737 } descriptor; | |
738 #endif | |
739 | |
740 /* Ensure that there is a channel open to the load ave device. */ | |
741 if (!getloadavg_initialized) | |
742 { | |
743 /* Attempt to open the channel. */ | |
744 #ifdef eunice | |
745 descriptor.dsc$w_length = 18; | |
746 descriptor.dsc$a_pointer = "$$VMS_LOAD_AVERAGE"; | |
747 #else | |
748 $DESCRIPTOR (descriptor, "LAV0:"); | |
749 #endif | |
750 if (sys$assign (&descriptor, &channel, 0, 0) & 1) | |
751 getloadavg_initialized = 1; | |
752 } | |
753 | |
754 /* Read the load average vector. */ | |
755 if (getloadavg_initialized | |
756 && !(sys$qiow (0, channel, IO$_READVBLK, 0, 0, 0, | |
757 load_ave, 12, 0, 0, 0, 0) & 1)) | |
758 { | |
759 sys$dassgn (channel); | |
760 getloadavg_initialized = 0; | |
761 } | |
762 | |
763 if (!getloadavg_initialized) | |
764 return -1; | |
765 #endif /* VMS */ | |
766 | |
767 #if !defined (LDAV_DONE) && defined(LOAD_AVE_TYPE) && !defined(VMS) | |
768 | |
769 /* UNIX-specific code -- read the average from /dev/kmem. */ | |
770 | |
771 #define LDAV_PRIVILEGED /* This code requires special installation. */ | |
772 | |
773 LOAD_AVE_TYPE load_ave[3]; | |
774 | |
775 /* Get the address of LDAV_SYMBOL. */ | |
776 if (offset == 0) | |
777 { | |
778 #ifndef sgi | |
779 #ifndef NLIST_STRUCT | |
780 strcpy (nl[0].n_name, LDAV_SYMBOL); | |
781 strcpy (nl[1].n_name, ""); | |
782 #else /* NLIST_STRUCT */ | |
783 #ifdef NLIST_NAME_UNION | |
784 nl[0].n_un.n_name = LDAV_SYMBOL; | |
785 nl[1].n_un.n_name = 0; | |
786 #else /* not NLIST_NAME_UNION */ | |
787 nl[0].n_name = LDAV_SYMBOL; | |
788 nl[1].n_name = 0; | |
789 #endif /* not NLIST_NAME_UNION */ | |
790 #endif /* NLIST_STRUCT */ | |
791 | |
4011
1117ec91799c
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
3597
diff
changeset
|
792 #ifndef SUNOS_5 |
2928 | 793 if (nlist (KERNEL_FILE, nl) >= 0) |
794 /* Omit "&& nl[0].n_type != 0 " -- it breaks on Sun386i. */ | |
795 { | |
796 #ifdef FIXUP_KERNEL_SYMBOL_ADDR | |
797 FIXUP_KERNEL_SYMBOL_ADDR (nl); | |
798 #endif | |
799 offset = nl[0].n_value; | |
800 } | |
4011
1117ec91799c
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
3597
diff
changeset
|
801 #endif /* !SUNOS_5 */ |
2928 | 802 #else /* sgi */ |
803 int ldav_off; | |
804 | |
805 ldav_off = sysmp (MP_KERNADDR, MPKA_AVENRUN); | |
806 if (ldav_off != -1) | |
807 offset = (long) ldav_off & 0x7fffffff; | |
808 #endif /* sgi */ | |
809 } | |
810 | |
811 /* Make sure we have /dev/kmem open. */ | |
812 if (!getloadavg_initialized) | |
813 { | |
814 #ifndef SUNOS_5 | |
815 channel = open ("/dev/kmem", 0); | |
816 if (channel >= 0) | |
817 getloadavg_initialized = 1; | |
818 #else /* SUNOS_5 */ | |
4011
1117ec91799c
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
3597
diff
changeset
|
819 /* We pass 0 for the kernel, corefile, and swapfile names |
1117ec91799c
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
3597
diff
changeset
|
820 to use the currently running kernel. */ |
2928 | 821 kd = kvm_open (0, 0, 0, O_RDONLY, 0); |
822 if (kd != 0) | |
823 { | |
4011
1117ec91799c
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
3597
diff
changeset
|
824 /* nlist the currently running kernel. */ |
2928 | 825 kvm_nlist (kd, nl); |
4011
1117ec91799c
*** empty log message ***
David J. MacKenzie <djm@gnu.org>
parents:
3597
diff
changeset
|
826 offset = nl[0].n_value; |
2928 | 827 getloadavg_initialized = 1; |
828 } | |
829 #endif /* SUNOS_5 */ | |
830 } | |
831 | |
832 /* If we can, get the load average values. */ | |
833 if (offset && getloadavg_initialized) | |
834 { | |
835 /* Try to read the load. */ | |
836 #ifndef SUNOS_5 | |
837 if (lseek (channel, offset, 0) == -1L | |
838 || read (channel, (char *) load_ave, sizeof (load_ave)) | |
839 != sizeof (load_ave)) | |
840 { | |
841 close (channel); | |
842 getloadavg_initialized = 0; | |
843 } | |
844 #else /* SUNOS_5 */ | |
845 if (kvm_read (kd, offset, (char *) load_ave, sizeof (load_ave)) | |
846 != sizeof (load_ave)) | |
847 { | |
848 kvm_close (kd); | |
849 getloadavg_initialized = 0; | |
850 } | |
851 #endif /* SUNOS_5 */ | |
852 } | |
853 | |
854 if (offset == 0 || !getloadavg_initialized) | |
855 return -1; | |
856 #endif /* LOAD_AVE_TYPE and not VMS */ | |
857 | |
858 #if !defined (LDAV_DONE) && defined (LOAD_AVE_TYPE) /* Including VMS. */ | |
859 if (nelem > 0) | |
860 loadavg[elem++] = LDAV_CVT (load_ave[0]); | |
861 if (nelem > 1) | |
862 loadavg[elem++] = LDAV_CVT (load_ave[1]); | |
863 if (nelem > 2) | |
864 loadavg[elem++] = LDAV_CVT (load_ave[2]); | |
865 | |
866 #define LDAV_DONE | |
867 #endif /* !LDAV_DONE && LOAD_AVE_TYPE */ | |
868 | |
869 #ifdef LDAV_DONE | |
870 return elem; | |
871 #else | |
872 /* Set errno to zero to indicate that there was no particular error; | |
873 this function just can't work at all on this system. */ | |
874 errno = 0; | |
875 return -1; | |
876 #endif | |
877 } | |
4409 | 878 |
879 #endif /* ! HAVE_GETLOADAVG */ | |
2928 | 880 |
881 #ifdef TEST | |
882 void | |
883 main (argc, argv) | |
884 int argc; | |
885 char **argv; | |
886 { | |
887 int naptime = 0; | |
888 | |
889 if (argc > 1) | |
890 naptime = atoi (argv[1]); | |
891 | |
892 while (1) | |
893 { | |
894 double avg[3]; | |
895 int loads; | |
896 | |
897 errno = 0; /* Don't be misled if it doesn't set errno. */ | |
898 loads = getloadavg (avg, 3); | |
899 if (loads == -1) | |
900 { | |
901 perror ("Error getting load average"); | |
902 exit (1); | |
903 } | |
904 if (loads > 0) | |
905 printf ("1-minute: %f ", avg[0]); | |
906 if (loads > 1) | |
907 printf ("5-minute: %f ", avg[1]); | |
908 if (loads > 2) | |
909 printf ("15-minute: %f ", avg[2]); | |
910 if (loads > 0) | |
911 putchar ('\n'); | |
4398 | 912 |
913 if (naptime == 0) | |
914 break; | |
2928 | 915 sleep (naptime); |
916 } | |
4398 | 917 |
918 exit (0); | |
2928 | 919 } |
920 #endif /* TEST */ |