Mercurial > emacs
annotate lispref/vol2.texi @ 90113:a50413a4ba8b
*** empty log message ***
author | Kenichi Handa <handa@m17n.org> |
---|---|
date | Wed, 02 Mar 2005 11:04:29 +0000 |
parents | 548375b6b1f8 |
children | 4da4a09e8b1b |
rev | line source |
---|---|
51094 | 1 This file is obsolete, and no longer part of the Emacs Lisp Reference Manual. |
2 It is still present in CVS in case we ever want to use some of it again. | |
3 | |
4 @c This is part of the GNU Emacs Lisp Reference Manual. | |
5 @c Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1998, 1999 | |
6 @c Free Software Foundation, Inc. | |
7 @c See the file elisp.texi for copying conditions. | |
8 | |
9 | |
41130 | 10 \input texinfo @c -*-texinfo-*- |
11 @c %**start of header | |
12 @setfilename elisp | |
13 @settitle GNU Emacs Lisp Reference Manual: Volume 2 | |
14 @smallbook | |
15 @c %**end of header | |
16 | |
17 | |
18 @tex | |
19 %%%% Experiment with smaller skip before sections and subsections. | |
20 %%%% --rjc 30mar92 | |
21 | |
22 \global\secheadingskip = 17pt plus 6pt minus 3pt | |
23 \global\subsecheadingskip = 14pt plus 6pt minus 3pt | |
24 | |
25 % The defaults are: | |
26 % \secheadingskip = 21pt plus 8pt minus 4pt | |
27 % \subsecheadingskip = 17pt plus 8pt minus 4pt | |
28 @end tex | |
29 | |
30 @finalout | |
31 @c tex | |
32 @c \overfullrule=0pt | |
33 @c end tex | |
34 | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
35 @c Start volume 2 chapter numbering on chapter 21; |
41130 | 36 @c this must be listed as chapno 20. |
37 @tex | |
38 \global\chapno=20 | |
39 @end tex | |
40 | |
41 @c ================================================================ | |
42 @c Note: I was unable to figure out how to get .aux files copied | |
43 @c properly in the time I had. Hence need to copy .aux file before | |
44 @c running Tex. --rjc | |
45 | |
46 @tex | |
47 | |
48 \message{} | |
49 \message{Redefining contents commands...} | |
50 \message{} | |
51 | |
52 % Special @contents command | |
53 | |
54 % This inputs fixed up table of contents file rather than create new one. | |
55 \global\def\contents{% | |
56 \startcontents{Table of Contents}% | |
57 \input elisp2-toc-ready.toc | |
58 \endgroup | |
59 \vfill \eject | |
60 } | |
61 | |
62 % Special @summarycontents command | |
63 % This inputs fixed up table of contents file rather than create new one. | |
64 \global\def\summarycontents{% | |
65 \startcontents{Short Contents}% | |
66 % | |
67 \let\chapentry = \shortchapentry | |
68 \let\unnumbchapentry = \shortunnumberedentry | |
69 % We want a true roman here for the page numbers. | |
70 \secfonts | |
71 \let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl | |
72 \rm | |
73 \advance\baselineskip by 1pt % Open it up a little. | |
74 \def\secentry ##1##2##3##4{} | |
75 \def\unnumbsecentry ##1##2{} | |
76 \def\subsecentry ##1##2##3##4##5{} | |
77 \def\unnumbsubsecentry ##1##2{} | |
78 \def\subsubsecentry ##1##2##3##4##5##6{} | |
79 \def\unnumbsubsubsecentry ##1##2{} | |
80 \input elisp2-toc-ready.toc | |
81 \endgroup | |
82 \vfill \eject | |
83 } | |
84 | |
85 \message{} | |
86 \message{Formatting special two volume edition...Volume 2...} | |
87 \message{} | |
88 @end tex | |
89 @c ================================================================ | |
90 | |
91 | |
92 @c ==> This `elisp-small.texi' is a `smallbook' version of the manual. | |
93 | |
94 @c ==== Following are acceptable over and underfull hboxes in TeX ==== | |
95 | |
96 @c ----- | |
97 @c [163] [164] [165] [166]) (loading.texi Chapter 13 [167] [168] [169] | |
98 @c Overfull \hbox (20.5428pt too wide) in paragraph at lines 131--131 | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
99 @c []@ninett |
41130 | 100 @c setenv EMAC-SLOAD-PATH .:/user/bil/emacs:/usr/local/lib/emacs/lisp[] |
101 @c ----- | |
102 @c (minibuf.texi Chapter 17 [206] [207] [208] [209] [210] [211] [212] [213] | |
103 @c [214] [215] | |
104 @c Overfull \hbox (2.09094pt too wide) in paragraph at lines 550--560 | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
105 @c @texttt map[] @textrm if @textsl require-match @textrm is |
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
106 @c @texttt nil[]@textrm , or else with the keymap @texttt minibuffer- |
41130 | 107 @c ----- |
108 @c (locals.texi Appendix @char 68 [533] [534] | |
109 @c Underfull \hbox (badness 2512) in paragraph at lines 4--4 | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
110 @c []@chaprm Appendix DStandard Buffer-Local |
41130 | 111 |
112 @c ------------------------------------------------------------------- | |
113 | |
114 @c | |
115 @c Combine indices. | |
116 @synindex cp fn | |
117 @syncodeindex vr fn | |
118 @syncodeindex ky fn | |
119 @syncodeindex pg fn | |
120 @syncodeindex tp fn | |
121 @c oops: texinfo-format-buffer ignores synindex | |
122 @c | |
123 | |
124 @ifinfo | |
125 This file documents GNU Emacs Lisp. | |
126 | |
127 @c The edition number appears in several places in this file | |
128 @c and also in the file intro.texi. | |
129 This is edition 2.4 of the GNU Emacs Lisp Reference | |
130 Manual. It corresponds to Emacs Version 19.29. | |
131 @c Please REMEMBER to update edition number in *four* places in this file | |
132 @c and also in *one* place in ==> intro.texi <== | |
133 @c huh? i only found three real places where the edition is stated, and | |
134 @c one place where it is not stated explicitly ("this info file is newer | |
135 @c than the foobar edition"). --mew 13sep93 | |
136 | |
137 Published by the Free Software Foundation | |
138 59 Temple Place, Suite 330 | |
139 Boston, MA 02111-1307 USA | |
140 @end ifinfo | |
141 | |
142 @setchapternewpage odd | |
143 | |
144 @iftex | |
145 @shorttitlepage The GNU Emacs Lisp Reference Manual: Volume 2 | |
146 @end iftex | |
147 @titlepage | |
148 @sp 1 | |
149 @center @titlefont{The} | |
150 @sp 1 | |
151 @center @titlefont{GNU Emacs Lisp} | |
152 @sp 1 | |
153 @center @titlefont{Reference Manual} | |
154 @sp 2 | |
155 @center GNU Emacs Version 19.29 | |
156 @center for Unix Users | |
157 @sp 1 | |
158 @center Edition 2.4, June 1995 | |
159 @sp 2 | |
160 @center @titlefont{Volume 2} | |
161 @sp 3 | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
162 @center by Bil Lewis, Dan LaLiberte, |
41130 | 163 @center and the GNU Manual Group |
164 @page | |
165 @vskip 0pt plus 1filll | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
166 Copyright @copyright{} 1990, 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. |
41130 | 167 |
168 @sp 2 | |
169 Edition 2.4 @* | |
170 Revised for Emacs Version 19.29,@* | |
171 June, 1995.@* | |
172 @sp 2 | |
173 ISBN 1-882114-71-X | |
174 | |
175 @sp 2 | |
176 Published by the Free Software Foundation @* | |
177 59 Temple Place, Suite 330 @* | |
178 Boston, MA 02111-1307 USA | |
179 | |
180 @sp 1 | |
181 Permission is granted to make and distribute verbatim copies of this | |
182 manual provided the copyright notice and this permission notice are | |
183 preserved on all copies. | |
184 | |
185 Permission is granted to copy and distribute modified versions of this | |
186 manual under the conditions for verbatim copying, provided also that the | |
187 section entitled ``GNU General Public License'' is included | |
188 exactly as in the original, and provided that the entire resulting | |
189 derived work is distributed under the terms of a permission notice | |
190 identical to this one. | |
191 | |
192 Permission is granted to copy and distribute translations of this manual | |
193 into another language, under the above conditions for modified versions, | |
194 except that the section entitled ``GNU General Public License'' may be | |
195 included in a translation approved by the Free Software Foundation | |
196 instead of in the original English. | |
197 | |
198 @sp 2 | |
199 Cover art by Etienne Suvasa. | |
200 @end titlepage | |
201 @page | |
202 | |
203 @node Top, Copying, (dir), (dir) | |
204 | |
205 @ifinfo | |
206 This Info file contains edition 2.4 of the GNU Emacs Lisp Reference | |
207 Manual, corresponding to GNU Emacs version 19.29. | |
208 @end ifinfo | |
209 | |
210 @menu | |
211 * Copying:: Conditions for copying and changing GNU Emacs. | |
212 * Introduction:: Introduction and conventions used. | |
213 | |
214 * Lisp Data Types:: Data types of objects in Emacs Lisp. | |
215 * Numbers:: Numbers and arithmetic functions. | |
216 * Strings and Characters:: Strings, and functions that work on them. | |
217 * Lists:: Lists, cons cells, and related functions. | |
218 * Sequences Arrays Vectors:: Lists, strings and vectors are called sequences. | |
219 Certain functions act on any kind of sequence. | |
220 The description of vectors is here as well. | |
221 * Symbols:: Symbols represent names, uniquely. | |
222 | |
223 * Evaluation:: How Lisp expressions are evaluated. | |
224 * Control Structures:: Conditionals, loops, nonlocal exits. | |
225 * Variables:: Using symbols in programs to stand for values. | |
226 * Functions:: A function is a Lisp program | |
227 that can be invoked from other functions. | |
228 * Macros:: Macros are a way to extend the Lisp language. | |
229 | |
230 * Loading:: Reading files of Lisp code into Lisp. | |
231 * Byte Compilation:: Compilation makes programs run faster. | |
232 * Debugging:: Tools and tips for debugging Lisp programs. | |
233 | |
234 * Read and Print:: Converting Lisp objects to text and back. | |
235 * Minibuffers:: Using the minibuffer to read input. | |
236 * Command Loop:: How the editor command loop works, | |
237 and how you can call its subroutines. | |
238 * Keymaps:: Defining the bindings from keys to commands. | |
239 * Modes:: Defining major and minor modes. | |
240 * Documentation:: Writing and using documentation strings. | |
241 | |
242 * Files:: Accessing files. | |
243 * Backups and Auto-Saving:: Controlling how backups and auto-save | |
244 files are made. | |
245 * Buffers:: Creating and using buffer objects. | |
246 * Windows:: Manipulating windows and displaying buffers. | |
247 * Frames:: Making multiple X windows. | |
248 * Positions:: Buffer positions and motion functions. | |
249 * Markers:: Markers represent positions and update | |
250 automatically when the text is changed. | |
251 | |
252 * Text:: Examining and changing text in buffers. | |
253 * Searching and Matching:: Searching buffers for strings or regexps. | |
254 * Syntax Tables:: The syntax table controls word and list parsing. | |
255 * Abbrevs:: How Abbrev mode works, and its data structures. | |
256 | |
257 * Processes:: Running and communicating with subprocesses. | |
258 * System Interface:: Getting the user id, system type, environment | |
259 variables, and other such things. | |
260 * Display:: Parameters controlling screen usage. | |
261 The bell. Waiting for input. | |
262 * Calendar:: Customizing the calendar and diary. | |
263 | |
264 Appendices | |
265 | |
266 * Tips:: Advice for writing Lisp programs. | |
267 * GNU Emacs Internals:: Building and dumping Emacs; | |
268 internal data structures. | |
269 * Standard Errors:: List of all error symbols. | |
270 * Standard Buffer-Local Variables:: List of variables local in all buffers. | |
271 * Standard Keymaps:: List of standard keymaps. | |
272 * Standard Hooks:: List of standard hook variables. | |
273 | |
274 * Index:: Index including concepts, functions, variables, | |
275 and other terms. | |
276 | |
277 --- The Detailed Node Listing --- | |
278 | |
279 Here are other nodes that are inferiors of those already listed, | |
280 mentioned here so you can get to them in one step: | |
281 | |
282 Introduction | |
283 | |
284 * Caveats:: Flaws and a request for help. | |
285 * Lisp History:: Emacs Lisp is descended from Maclisp. | |
286 * Conventions:: How the manual is formatted. | |
287 * Acknowledgements:: The authors, editors, and sponsors of this manual. | |
288 | |
289 Conventions | |
290 | |
291 * Some Terms:: Explanation of terms we use in this manual. | |
292 * nil and t:: How the symbols @code{nil} and @code{t} are used. | |
293 * Evaluation Notation:: The format we use for examples of evaluation. | |
294 * Printing Notation:: The format we use for examples that print output. | |
295 * Error Messages:: The format we use for examples of errors. | |
296 * Buffer Text Notation:: The format we use for buffer contents in examples. | |
297 * Format of Descriptions:: Notation for describing functions, variables, etc. | |
298 | |
299 Format of Descriptions | |
300 | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
301 * A Sample Function Description:: |
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
302 * A Sample Variable Description:: |
41130 | 303 |
304 Lisp Data Types | |
305 | |
306 * Printed Representation:: How Lisp objects are represented as text. | |
307 * Comments:: Comments and their formatting conventions. | |
308 * Programming Types:: Types found in all Lisp systems. | |
309 * Editing Types:: Types specific to Emacs. | |
310 * Type Predicates:: Tests related to types. | |
311 * Equality Predicates:: Tests of equality between any two objects. | |
312 | |
313 Programming Types | |
314 | |
315 * Integer Type:: Numbers without fractional parts. | |
316 * Floating Point Type:: Numbers with fractional parts and with a large range. | |
317 * Character Type:: The representation of letters, numbers and | |
318 control characters. | |
319 * Sequence Type:: Both lists and arrays are classified as sequences. | |
320 * Cons Cell Type:: Cons cells, and lists (which are made from cons cells). | |
321 * Array Type:: Arrays include strings and vectors. | |
322 * String Type:: An (efficient) array of characters. | |
323 * Vector Type:: One-dimensional arrays. | |
324 * Symbol Type:: A multi-use object that refers to a function, | |
325 variable, property list, or itself. | |
326 * Function Type:: A piece of executable code you can call from elsewhere. | |
327 * Macro Type:: A method of expanding an expression into another | |
328 expression, more fundamental but less pretty. | |
329 * Primitive Function Type:: A function written in C, callable from Lisp. | |
330 * Byte-Code Type:: A function written in Lisp, then compiled. | |
331 * Autoload Type:: A type used for automatically loading seldom-used | |
332 functions. | |
333 | |
334 List Type | |
335 | |
336 * Dotted Pair Notation:: An alternative syntax for lists. | |
337 * Association List Type:: A specially constructed list. | |
338 | |
339 Editing Types | |
340 | |
341 * Buffer Type:: The basic object of editing. | |
342 * Window Type:: What makes buffers visible. | |
343 * Window Configuration Type::Save what the screen looks like. | |
344 * Marker Type:: A position in a buffer. | |
345 * Process Type:: A process running on the underlying OS. | |
346 * Stream Type:: Receive or send characters. | |
347 * Keymap Type:: What function a keystroke invokes. | |
348 * Syntax Table Type:: What a character means. | |
349 | |
350 Numbers | |
351 | |
352 * Integer Basics:: Representation and range of integers. | |
353 * Float Basics:: Representation and range of floating point. | |
354 * Predicates on Numbers:: Testing for numbers. | |
355 * Comparison of Numbers:: Equality and inequality predicates. | |
356 * Arithmetic Operations:: How to add, subtract, multiply and divide. | |
357 * Bitwise Operations:: Logical and, or, not, shifting. | |
358 * Numeric Conversions:: Converting float to integer and vice versa. | |
359 * Math Functions:: Trig, exponential and logarithmic functions. | |
360 * Random Numbers:: Obtaining random integers, predictable or not. | |
361 | |
362 Strings and Characters | |
363 | |
364 * String Basics:: Basic properties of strings and characters. | |
365 * Predicates for Strings:: Testing whether an object is a string or char. | |
366 * Creating Strings:: Functions to allocate new strings. | |
367 * Text Comparison:: Comparing characters or strings. | |
368 * String Conversion:: Converting characters or strings and vice versa. | |
369 * Formatting Strings:: @code{format}: Emacs's analog of @code{printf}. | |
370 * Character Case:: Case conversion functions. | |
371 | |
372 Lists | |
373 | |
374 * Cons Cells:: How lists are made out of cons cells. | |
375 * Lists as Boxes:: Graphical notation to explain lists. | |
376 * List-related Predicates:: Is this object a list? Comparing two lists. | |
377 * List Elements:: Extracting the pieces of a list. | |
378 * Building Lists:: Creating list structure. | |
379 * Modifying Lists:: Storing new pieces into an existing list. | |
380 * Sets And Lists:: A list can represent a finite mathematical set. | |
381 * Association Lists:: A list can represent a finite relation or mapping. | |
382 | |
383 Modifying Existing List Structure | |
384 | |
385 * Setcar:: Replacing an element in a list. | |
386 * Setcdr:: Replacing part of the list backbone. | |
387 This can be used to remove or add elements. | |
388 * Rearrangement:: Reordering the elements in a list; combining lists. | |
389 | |
390 Sequences, Arrays, and Vectors | |
391 | |
392 * Sequence Functions:: Functions that accept any kind of sequence. | |
393 * Arrays:: Characteristics of arrays in Emacs Lisp. | |
394 * Array Functions:: Functions specifically for arrays. | |
395 * Vectors:: Functions specifically for vectors. | |
396 | |
397 Symbols | |
398 | |
399 * Symbol Components:: Symbols have names, values, function definitions | |
400 and property lists. | |
401 * Definitions:: A definition says how a symbol will be used. | |
402 * Creating Symbols:: How symbols are kept unique. | |
403 * Property Lists:: Each symbol has a property list | |
404 for recording miscellaneous information. | |
405 | |
406 Evaluation | |
407 | |
408 * Intro Eval:: Evaluation in the scheme of things. | |
409 * Eval:: How to invoke the Lisp interpreter explicitly. | |
410 * Forms:: How various sorts of objects are evaluated. | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
411 * Quoting:: Avoiding evaluation (to put constants in |
41130 | 412 the program). |
413 | |
414 Kinds of Forms | |
415 | |
416 * Self-Evaluating Forms:: Forms that evaluate to themselves. | |
417 * Symbol Forms:: Symbols evaluate as variables. | |
418 * Classifying Lists:: How to distinguish various sorts of list forms. | |
419 * Function Forms:: Forms that call functions. | |
420 * Macro Forms:: Forms that call macros. | |
421 * Special Forms:: ``Special forms'' are idiosyncratic primitives, | |
422 most of them extremely important. | |
423 * Autoloading:: Functions set up to load files | |
424 containing their real definitions. | |
425 | |
426 Control Structures | |
427 | |
428 * Sequencing:: Evaluation in textual order. | |
429 * Conditionals:: @code{if}, @code{cond}. | |
430 * Combining Conditions:: @code{and}, @code{or}, @code{not}. | |
431 * Iteration:: @code{while} loops. | |
432 * Nonlocal Exits:: Jumping out of a sequence. | |
433 | |
434 Nonlocal Exits | |
435 | |
436 * Catch and Throw:: Nonlocal exits for the program's own purposes. | |
437 * Examples of Catch:: Showing how such nonlocal exits can be written. | |
438 * Errors:: How errors are signaled and handled. | |
439 * Cleanups:: Arranging to run a cleanup form if an | |
440 error happens. | |
441 | |
442 Errors | |
443 | |
444 * Signaling Errors:: How to report an error. | |
445 * Processing of Errors:: What Emacs does when you report an error. | |
446 * Handling Errors:: How you can trap errors and continue execution. | |
447 * Error Symbols:: How errors are classified for trapping them. | |
448 | |
449 Variables | |
450 | |
451 * Global Variables:: Variable values that exist permanently, everywhere. | |
452 * Constant Variables:: Certain "variables" have values that never change. | |
453 * Local Variables:: Variable values that exist only temporarily. | |
454 * Void Variables:: Symbols that lack values. | |
455 * Defining Variables:: A definition says a symbol is used as a variable. | |
456 * Accessing Variables:: Examining values of variables whose names | |
457 are known only at run time. | |
458 * Setting Variables:: Storing new values in variables. | |
459 * Variable Scoping:: How Lisp chooses among local and global values. | |
460 * Buffer-Local Variables:: Variable values in effect only in one buffer. | |
461 | |
462 Scoping Rules for Variable Bindings | |
463 | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
464 * Scope:: Scope means where in the program a value |
41130 | 465 is visible. Comparison with other languages. |
466 * Extent:: Extent means how long in time a value exists. | |
467 * Impl of Scope:: Two ways to implement dynamic scoping. | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
468 * Using Scoping:: How to use dynamic scoping carefully and |
41130 | 469 avoid problems. |
470 | |
471 Buffer-Local Variables | |
472 | |
473 * Intro to Buffer-Local:: Introduction and concepts. | |
474 * Creating Buffer-Local:: Creating and destroying buffer-local bindings. | |
475 * Default Value:: The default value is seen in buffers | |
476 that don't have their own local values. | |
477 | |
478 Functions | |
479 | |
480 * What Is a Function:: Lisp functions vs primitives; terminology. | |
481 * Lambda Expressions:: How functions are expressed as Lisp objects. | |
482 * Function Names:: A symbol can serve as the name of a function. | |
483 * Defining Functions:: Lisp expressions for defining functions. | |
484 * Calling Functions:: How to use an existing function. | |
485 * Mapping Functions:: Applying a function to each element of a list, etc. | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
486 * Anonymous Functions:: Lambda-expressions are functions with no names. |
41130 | 487 * Function Cells:: Accessing or setting the function definition |
488 of a symbol. | |
489 * Related Topics:: Cross-references to specific Lisp primitives | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
490 that have a special bearing on how |
41130 | 491 functions work. |
492 | |
493 Lambda Expressions | |
494 | |
495 * Lambda Components:: The parts of a lambda expression. | |
496 * Simple Lambda:: A simple example. | |
497 * Argument List:: Details and special features of argument lists. | |
498 * Function Documentation:: How to put documentation in a function. | |
499 | |
500 Macros | |
501 | |
502 * Simple Macro:: A basic example. | |
503 * Expansion:: How, when and why macros are expanded. | |
504 * Compiling Macros:: How macros are expanded by the compiler. | |
505 * Defining Macros:: How to write a macro definition. | |
506 * Backquote:: Easier construction of list structure. | |
507 * Problems with Macros:: Don't evaluate the macro arguments too many times. | |
508 Don't hide the user's variables. | |
509 | |
510 Loading | |
511 | |
512 * How Programs Do Loading:: The @code{load} function and others. | |
513 * Autoload:: Setting up a function to autoload. | |
514 * Named Features:: Loading a library if it isn't already loaded. | |
515 * Repeated Loading:: Precautions about loading a file twice. | |
516 | |
517 Byte Compilation | |
518 | |
519 * Compilation Functions:: Byte compilation functions. | |
520 * Disassembly:: Disassembling byte-code; how to read byte-code. | |
521 | |
522 Debugging Lisp Programs | |
523 | |
524 * Debugger:: How the Emacs Lisp debugger is implemented. | |
525 * Syntax Errors:: How to find syntax errors. | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
526 * Compilation Errors:: How to find errors that show up in |
41130 | 527 byte compilation. |
528 * Edebug:: A source-level Emacs Lisp debugger. | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
529 |
41130 | 530 The Lisp Debugger |
531 | |
532 * Error Debugging:: Entering the debugger when an error happens. | |
533 * Function Debugging:: Entering it when a certain function is called. | |
534 * Explicit Debug:: Entering it at a certain point in the program. | |
535 * Using Debugger:: What the debugger does; what you see while in it. | |
536 * Debugger Commands:: Commands used while in the debugger. | |
537 * Invoking the Debugger:: How to call the function @code{debug}. | |
538 * Internals of Debugger:: Subroutines of the debugger, and global variables. | |
539 | |
540 Debugging Invalid Lisp Syntax | |
541 | |
542 * Excess Open:: How to find a spurious open paren or missing close. | |
543 * Excess Close:: How to find a spurious close paren or missing open. | |
544 | |
545 Reading and Printing Lisp Objects | |
546 | |
547 * Streams Intro:: Overview of streams, reading and printing. | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
548 * Input Streams:: Various data types that can be used as |
41130 | 549 input streams. |
550 * Input Functions:: Functions to read Lisp objects from text. | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
551 * Output Streams:: Various data types that can be used as |
41130 | 552 output streams. |
553 * Output Functions:: Functions to print Lisp objects as text. | |
554 | |
555 Minibuffers | |
556 | |
557 * Intro to Minibuffers:: Basic information about minibuffers. | |
558 * Text from Minibuffer:: How to read a straight text string. | |
559 * Object from Minibuffer:: How to read a Lisp object or expression. | |
560 * Completion:: How to invoke and customize completion. | |
561 * Yes-or-No Queries:: Asking a question with a simple answer. | |
562 * Minibuffer Misc:: Various customization hooks and variables. | |
563 | |
564 Completion | |
565 | |
566 * Basic Completion:: Low-level functions for completing strings. | |
567 (These are too low level to use the minibuffer.) | |
568 * Minibuffer Completion:: Invoking the minibuffer with completion. | |
569 * Completion Commands:: Minibuffer commands that do completion. | |
570 * High-Level Completion:: Convenient special cases of completion | |
571 (reading buffer name, file name, etc.) | |
572 * Reading File Names:: Using completion to read file names. | |
573 * Programmed Completion:: Finding the completions for a given file name. | |
574 | |
575 Command Loop | |
576 | |
577 * Command Overview:: How the command loop reads commands. | |
578 * Defining Commands:: Specifying how a function should read arguments. | |
579 * Interactive Call:: Calling a command, so that it will read arguments. | |
580 * Command Loop Info:: Variables set by the command loop for you to examine. | |
581 * Input Events:: What input looks like when you read it. | |
582 * Reading Input:: How to read input events from the keyboard or mouse. | |
583 * Waiting:: Waiting for user input or elapsed time. | |
584 * Quitting:: How @kbd{C-g} works. How to catch or defer quitting. | |
585 * Prefix Command Arguments:: How the commands to set prefix args work. | |
586 * Recursive Editing:: Entering a recursive edit, | |
587 and why you usually shouldn't. | |
588 * Disabling Commands:: How the command loop handles disabled commands. | |
589 * Command History:: How the command history is set up, and how accessed. | |
590 * Keyboard Macros:: How keyboard macros are implemented. | |
591 | |
592 Defining Commands | |
593 | |
594 * Using Interactive:: General rules for @code{interactive}. | |
595 * Interactive Codes:: The standard letter-codes for reading arguments | |
596 in various ways. | |
597 * Interactive Examples:: Examples of how to read interactive arguments. | |
598 | |
599 Keymaps | |
600 | |
601 * Keymap Terminology:: Definitions of terms pertaining to keymaps. | |
602 * Format of Keymaps:: What a keymap looks like as a Lisp object. | |
603 * Creating Keymaps:: Functions to create and copy keymaps. | |
604 * Inheritance and Keymaps:: How one keymap can inherit the bindings | |
605 of another keymap. | |
606 * Prefix Keys:: Defining a key with a keymap as its definition. | |
607 * Menu Keymaps:: A keymap can define a menu for X | |
608 or for use from the terminal. | |
609 * Active Keymaps:: Each buffer has a local keymap | |
610 to override the standard (global) bindings. | |
611 Each minor mode can also override them. | |
612 * Key Lookup:: How extracting elements from keymaps works. | |
613 * Functions for Key Lookup:: How to request key lookup. | |
614 * Changing Key Bindings:: Redefining a key in a keymap. | |
615 * Key Binding Commands:: Interactive interfaces for redefining keys. | |
616 * Scanning Keymaps:: Looking through all keymaps, for printing help. | |
617 | |
618 Major and Minor Modes | |
619 | |
620 * Major Modes:: Defining major modes. | |
621 * Minor Modes:: Defining minor modes. | |
622 * Mode Line Format:: Customizing the text that appears in the mode line. | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
623 * Hooks:: How to use hooks; how to write code that |
41130 | 624 provides hooks. |
625 | |
626 Major Modes | |
627 | |
628 * Major Mode Conventions:: Coding conventions for keymaps, etc. | |
629 * Example Major Modes:: Text mode and Lisp modes. | |
630 * Auto Major Mode:: How Emacs chooses the major mode automatically. | |
631 * Mode Help:: Finding out how to use a mode. | |
632 | |
633 Minor Modes | |
634 | |
635 * Minor Mode Conventions:: Tips for writing a minor mode. | |
636 * Keymaps and Minor Modes:: How a minor mode can have its own keymap. | |
637 | |
638 Mode Line Format | |
639 | |
640 * Mode Line Data:: The data structure that controls the mode line. | |
641 * Mode Line Variables:: Variables used in that data structure. | |
642 * %-Constructs:: Putting information into a mode line. | |
643 | |
644 Documentation | |
645 | |
646 * Documentation Basics:: Good style for doc strings. | |
647 Where to put them. How Emacs stores them. | |
648 * Accessing Documentation:: How Lisp programs can access doc strings. | |
649 * Keys in Documentation:: Substituting current key bindings. | |
650 * Describing Characters:: Making printable descriptions of | |
651 non-printing characters and key sequences. | |
652 * Help Functions:: Subroutines used by Emacs help facilities. | |
653 | |
654 Files | |
655 | |
656 * Visiting Files:: Reading files into Emacs buffers for editing. | |
657 * Saving Buffers:: Writing changed buffers back into files. | |
658 * Reading from Files:: Reading files into other buffers. | |
659 * Writing to Files:: Writing new files from parts of buffers. | |
660 * File Locks:: Locking and unlocking files, to prevent | |
661 simultaneous editing by two people. | |
662 * Information about Files:: Testing existence, accessibility, size of files. | |
663 * Contents of Directories:: Getting a list of the files in a directory. | |
664 * Changing File Attributes:: Renaming files, changing protection, etc. | |
665 * File Names:: Decomposing and expanding file names. | |
666 | |
667 Visiting Files | |
668 | |
669 * Visiting Functions:: The usual interface functions for visiting. | |
670 * Subroutines of Visiting:: Lower-level subroutines that they use. | |
671 | |
672 Information about Files | |
673 | |
674 * Testing Accessibility:: Is a given file readable? Writable? | |
675 * Kinds of Files:: Is it a directory? A link? | |
676 * File Attributes:: How large is it? Any other names? Etc. | |
677 | |
678 File Names | |
679 | |
680 * File Name Components:: The directory part of a file name, and the rest. | |
681 * Directory Names:: A directory's name as a directory | |
682 is different from its name as a file. | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
683 * Relative File Names:: Some file names are relative to a |
41130 | 684 current directory. |
685 * File Name Expansion:: Converting relative file names to absolute ones. | |
686 * Unique File Names:: Generating names for temporary files. | |
687 * File Name Completion:: Finding the completions for a given file name. | |
688 | |
689 Backups and Auto-Saving | |
690 | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
691 * Backup Files:: How backup files are made; how their names |
41130 | 692 are chosen. |
693 * Auto-Saving:: How auto-save files are made; how their | |
694 names are chosen. | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
695 * Reverting:: @code{revert-buffer}, and how to customize |
41130 | 696 what it does. |
697 | |
698 Backup Files | |
699 | |
700 * Making Backups:: How Emacs makes backup files, and when. | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
701 * Rename or Copy:: Two alternatives: renaming the old file |
41130 | 702 or copying it. |
703 * Numbered Backups:: Keeping multiple backups for each source file. | |
704 * Backup Names:: How backup file names are computed; customization. | |
705 | |
706 Buffers | |
707 | |
708 * Buffer Basics:: What is a buffer? | |
709 * Buffer Names:: Accessing and changing buffer names. | |
710 * Buffer File Name:: The buffer file name indicates which file | |
711 is visited. | |
712 * Buffer Modification:: A buffer is @dfn{modified} if it needs to be saved. | |
713 * Modification Time:: Determining whether the visited file was changed | |
714 ``behind Emacs's back''. | |
715 * Read Only Buffers:: Modifying text is not allowed in a | |
716 read-only buffer. | |
717 * The Buffer List:: How to look at all the existing buffers. | |
718 * Creating Buffers:: Functions that create buffers. | |
719 * Killing Buffers:: Buffers exist until explicitly killed. | |
720 * Current Buffer:: Designating a buffer as current | |
721 so primitives will access its contents. | |
722 | |
723 Windows | |
724 | |
725 * Basic Windows:: Basic information on using windows. | |
726 * Splitting Windows:: Splitting one window into two windows. | |
727 * Deleting Windows:: Deleting a window gives its space to other windows. | |
728 * Selecting Windows:: The selected window is the one that you edit in. | |
729 * Cyclic Window Ordering:: Moving around the existing windows. | |
730 * Buffers and Windows:: Each window displays the contents of a buffer. | |
731 * Displaying Buffers:: Higher-lever functions for displaying a buffer | |
732 and choosing a window for it. | |
733 * Window Point:: Each window has its own location of point. | |
734 * Window Start:: The display-start position controls which text | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
735 is on-screen in the window. |
41130 | 736 * Vertical Scrolling:: Moving text up and down in the window. |
737 * Horizontal Scrolling:: Moving text sideways on the window. | |
738 * Size of Window:: Accessing the size of a window. | |
739 * Resizing Windows:: Changing the size of a window. | |
740 * Window Configurations:: Saving and restoring the state of the screen. | |
741 | |
742 Frames | |
743 | |
744 * Creating Frames:: Creating additional frames. | |
745 * Multiple Displays:: Creating frames on other X displays. | |
746 * Frame Parameters:: Controlling frame size, position, font, etc. | |
747 * Frame Titles:: Automatic updating of frame titles. | |
748 * Deleting Frames:: Frames last until explicitly deleted. | |
749 * Finding All Frames:: How to examine all existing frames. | |
750 * Frames and Windows:: A frame contains windows; | |
751 display of text always works through windows. | |
752 * Minibuffers and Frames:: How a frame finds the minibuffer to use. | |
753 * Input Focus:: Specifying the selected frame. | |
754 * Visibility of Frames:: Frames may be visible or invisible, or icons. | |
755 * Raising and Lowering:: Raising a frame makes it hide other X windows; | |
756 lowering it makes the others hide them. | |
757 * Frame Configurations:: Saving the state of all frames. | |
758 * Mouse Tracking:: Getting events that say when the mouse moves. | |
759 * Mouse Position:: Asking where the mouse is, or moving it. | |
760 * Pop-Up Menus:: Displaying a menu for the user to select from. | |
761 * Dialog Boxes:: Displaying a box to ask yes or no. | |
762 * Pointer Shapes:: Specifying the shape of the mouse pointer. | |
763 * X Selections:: Transferring text to and from other X clients. | |
764 * Color Names:: Getting the definitions of color names. | |
765 * Resources:: Getting resource values from the server. | |
766 * Server Data:: Getting info about the X server. | |
767 | |
768 Positions | |
769 | |
770 * Point:: The special position where editing takes place. | |
771 * Motion:: Changing point. | |
772 * Excursions:: Temporary motion and buffer changes. | |
773 * Narrowing:: Restricting editing to a portion of the buffer. | |
774 | |
775 Motion | |
776 | |
777 * Character Motion:: Moving in terms of characters. | |
778 * Word Motion:: Moving in terms of words. | |
779 * Buffer End Motion:: Moving to the beginning or end of the buffer. | |
780 * Text Lines:: Moving in terms of lines of text. | |
781 * Screen Lines:: Moving in terms of lines as displayed. | |
782 * List Motion:: Moving by parsing lists and sexps. | |
783 * Skipping Characters:: Skipping characters belonging to a certain set. | |
784 | |
785 Markers | |
786 | |
787 * Overview of Markers:: The components of a marker, and how it relocates. | |
788 * Predicates on Markers:: Testing whether an object is a marker. | |
789 * Creating Markers:: Making empty markers or markers at certain places. | |
790 * Information from Markers:: Finding the marker's buffer or character | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
791 position. |
41130 | 792 * Changing Markers:: Moving the marker to a new buffer or position. |
793 * The Mark:: How ``the mark'' is implemented with a marker. | |
794 * The Region:: How to access ``the region''. | |
795 | |
796 Text | |
797 | |
798 * Near Point:: Examining text in the vicinity of point. | |
799 * Buffer Contents:: Examining text in a general fashion. | |
800 * Insertion:: Adding new text to a buffer. | |
801 * Commands for Insertion:: User-level commands to insert text. | |
802 * Deletion:: Removing text from a buffer. | |
803 * User-Level Deletion:: User-level commands to delete text. | |
804 * The Kill Ring:: Where removed text sometimes is saved for | |
805 later use. | |
806 * Undo:: Undoing changes to the text of a buffer. | |
807 * Auto Filling:: How auto-fill mode is implemented to break lines. | |
808 * Filling:: Functions for explicit filling. | |
809 * Margins:: How to specify margins for filling commands. | |
810 * Sorting:: Functions for sorting parts of the buffer. | |
811 * Indentation:: Functions to insert or adjust indentation. | |
812 * Columns:: Computing horizontal positions, and using them. | |
813 * Case Changes:: Case conversion of parts of the buffer. | |
814 * Substitution:: Replacing a given character wherever it appears. | |
815 * Registers:: How registers are implemented. Accessing | |
816 the text or position stored in a register. | |
49600
23a1cea22d13
Trailing whitespace deleted.
Juanma Barranquero <lekktu@gmail.com>
parents:
41130
diff
changeset
|
817 |
41130 | 818 The Kill Ring |
819 | |
820 * Kill Ring Concepts:: What text looks like in the kill ring. | |
821 * Kill Functions:: Functions that kill text. | |
822 * Yank Commands:: Commands that access the kill ring. | |
823 * Low-Level Kill Ring:: Functions and variables for kill ring access. | |
824 * Internals of Kill Ring:: Variables that hold kill-ring data. | |
825 | |
826 Indentation | |
827 | |
828 * Primitive Indent:: Functions used to count and insert indentation. | |
829 * Mode-Specific Indent:: Customize indentation for different modes. | |
830 * Region Indent:: Indent all the lines in a region. | |
831 * Relative Indent:: Indent the current line based on previous lines. | |
832 * Indent Tabs:: Adjustable, typewriter-like tab stops. | |
833 * Motion by Indent:: Move to first non-blank character. | |
834 | |
835 Searching and Matching | |
836 | |
837 * String Search:: Search for an exact match. | |
838 * Regular Expressions:: Describing classes of strings. | |
839 * Regexp Search:: Searching for a match for a regexp. | |
840 * Match Data:: Finding out which part of the text matched | |
841 various parts of a regexp, after regexp search. | |
842 * Saving Match Data:: Saving and restoring this information. | |
843 * Standard Regexps:: Useful regexps for finding sentences, pages,... | |
844 * Searching and Case:: Case-independent or case-significant searching. | |
845 | |
846 Regular Expressions | |
847 | |
848 * Syntax of Regexps:: Rules for writing regular expressions. | |
849 * Regexp Example:: Illustrates regular expression syntax. | |
850 | |
851 Syntax Tables | |
852 | |
853 * Syntax Descriptors:: How characters are classified. | |
854 * Syntax Table Functions:: How to create, examine and alter syntax tables. | |
855 * Parsing Expressions:: Parsing balanced expressions | |
856 using the syntax table. | |
857 * Standard Syntax Tables:: Syntax tables used by various major modes. | |
858 * Syntax Table Internals:: How syntax table information is stored. | |
859 | |
860 Syntax Descriptors | |
861 | |
862 * Syntax Class Table:: Table of syntax classes. | |
863 * Syntax Flags:: Additional flags each character can have. | |
864 | |
865 Abbrevs And Abbrev Expansion | |
866 | |
867 * Abbrev Mode:: Setting up Emacs for abbreviation. | |
868 * Tables: Abbrev Tables. Creating and working with abbrev tables. | |
869 * Defining Abbrevs:: Specifying abbreviations and their expansions. | |
870 * Files: Abbrev Files. Saving abbrevs in files. | |
871 * Expansion: Abbrev Expansion. Controlling expansion; expansion subroutines. | |
872 * Standard Abbrev Tables:: Abbrev tables used by various major modes. | |
873 | |
874 Processes | |
875 | |
876 * Subprocess Creation:: Functions that start subprocesses. | |
877 * Synchronous Processes:: Details of using synchronous subprocesses. | |
878 * Asynchronous Processes:: Starting up an asynchronous subprocess. | |
879 * Deleting Processes:: Eliminating an asynchronous subprocess. | |
880 * Process Information:: Accessing run-status and other attributes. | |
881 * Input to Processes:: Sending input to an asynchronous subprocess. | |
882 * Signals to Processes:: Stopping, continuing or interrupting | |
883 an asynchronous subprocess. | |
884 * Output from Processes:: Collecting output from an asynchronous subprocess. | |
885 * Sentinels:: Sentinels run when process run-status changes. | |
886 * Network:: Opening network connections. | |
887 | |
888 Receiving Output from Processes | |
889 | |
890 * Process Buffers:: If no filter, output is put in a buffer. | |
891 * Filter Functions:: Filter functions accept output from the process. | |
892 * Accepting Output:: How to wait until process output arrives. | |
893 | |
894 Operating System Interface | |
895 | |
896 * Starting Up:: Customizing Emacs start-up processing. | |
897 * Getting Out:: How exiting works (permanent or temporary). | |
898 * System Environment:: Distinguish the name and kind of system. | |
899 * Terminal Input:: Recording terminal input for debugging. | |
900 * Terminal Output:: Recording terminal output for debugging. | |
901 * Flow Control:: How to turn output flow control on or off. | |
902 * Batch Mode:: Running Emacs without terminal interaction. | |
903 | |
904 Starting Up Emacs | |
905 | |
906 * Start-up Summary:: Sequence of actions Emacs performs at start-up. | |
907 * Init File:: Details on reading the init file (@file{.emacs}). | |
908 * Terminal-Specific:: How the terminal-specific Lisp file is read. | |
909 * Command Line Arguments:: How command line arguments are processed, | |
910 and how you can customize them. | |
911 | |
912 Getting out of Emacs | |
913 | |
914 * Killing Emacs:: Exiting Emacs irreversibly. | |
915 * Suspending Emacs:: Exiting Emacs reversibly. | |
916 | |
917 Emacs Display | |
918 | |
919 * Refresh Screen:: Clearing the screen and redrawing everything on it. | |
920 * Truncation:: Folding or wrapping long text lines. | |
921 * The Echo Area:: Where messages are displayed. | |
922 * Selective Display:: Hiding part of the buffer text. | |
923 * Overlay Arrow:: Display of an arrow to indicate position. | |
924 * Temporary Displays:: Displays that go away automatically. | |
925 * Waiting:: Forcing display update and waiting for user. | |
926 * Blinking:: How Emacs shows the matching open parenthesis. | |
927 * Usual Display:: How control characters are displayed. | |
928 * Beeping:: Audible signal to the user. | |
929 * Window Systems:: Which window system is being used. | |
930 | |
931 GNU Emacs Internals | |
932 | |
933 * Building Emacs:: How to preload Lisp libraries into Emacs. | |
934 * Pure Storage:: A kludge to make preloaded Lisp functions sharable. | |
935 * Garbage Collection:: Reclaiming space for Lisp objects no longer used. | |
936 * Object Internals:: Data formats of buffers, windows, processes. | |
937 * Writing Emacs Primitives:: Writing C code for Emacs. | |
938 | |
939 Object Internals | |
940 | |
941 * Buffer Internals:: Components of a buffer structure. | |
942 * Window Internals:: Components of a window structure. | |
943 * Process Internals:: Components of a process structure. | |
944 @end menu | |
945 | |
946 @c ================ Volume 1 ================ | |
947 | |
948 @c include intro.texi | |
949 @c include objects.texi | |
950 @c include numbers.texi | |
951 @c include strings.texi | |
952 | |
953 @c include lists.texi | |
954 @c include sequences.texi | |
955 @c include symbols.texi | |
956 @c include eval.texi | |
957 | |
958 @c include control.texi | |
959 @c include variables.texi | |
960 @c include functions.texi | |
961 @c include macros.texi | |
962 | |
963 @c include loading.texi | |
964 @c include compile.texi | |
965 @c include debugging.texi | |
966 @c include streams.texi | |
967 | |
968 @c include minibuf.texi | |
969 @c include commands.texi | |
970 @c include keymaps.texi | |
971 @c include modes.texi | |
972 | |
973 @c ================ Beginning of Volume 2 ================ | |
974 | |
975 @include help.texi | |
976 @include files.texi | |
977 @include backups.texi | |
978 @include buffers.texi | |
979 | |
980 @include windows.texi | |
981 @include frames.texi | |
982 @include positions.texi | |
983 @include markers.texi | |
984 @include text.texi | |
985 | |
986 @include searching.texi | |
987 @include syntax.texi | |
988 @include abbrevs.texi | |
989 | |
990 @include processes.texi | |
991 @include os.texi | |
992 @include display.texi | |
993 @include calendar.texi | |
994 | |
995 @c MOVE to Emacs Manual: include misc-modes.texi | |
996 | |
997 @c appendices | |
998 | |
999 @c REMOVE this: include non-hacker.texi | |
1000 | |
1001 @include tips.texi | |
1002 @include internals.texi | |
1003 @include errors.texi | |
1004 @include locals.texi | |
1005 @include maps.texi | |
1006 @include hooks.texi | |
1007 | |
1008 @include index-vol2.texi | |
1009 | |
1010 @page | |
1011 @c Print the tables of contents | |
1012 @summarycontents | |
1013 @contents | |
1014 @c That's all | |
1015 | |
1016 @bye | |
1017 | |
1018 | |
1019 These words prevent "local variables" above from confusing Emacs. | |
89910 | 1020 |
1021 @ignore | |
1022 arch-tag: dfdbecf8-fec2-49c1-8427-3e8ac8b0b849 | |
1023 @end ignore |