Mercurial > emacs
annotate src/m/sequent.h @ 13223:b0717b54e8b6
(find_section): New function.
(unexec): Use it. Also simplify previous changes.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Sun, 15 Oct 1995 01:07:44 +0000 |
parents | 23f72b18b420 |
children | 1d4654a97585 |
rev | line source |
---|---|
456 | 1 /* machine description file for SEQUENT BALANCE machines |
2 Copyright (C) 1985, 1986 Free Software Foundation, Inc. | |
3 | |
4 This file is part of GNU Emacs. | |
5 | |
6 GNU Emacs is free software; you can redistribute it and/or modify | |
7 it under the terms of the GNU General Public License as published by | |
3699 | 8 the Free Software Foundation; either version 2, or (at your option) |
456 | 9 any later version. |
10 | |
11 GNU Emacs is distributed in the hope that it will be useful, | |
12 but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 GNU General Public License for more details. | |
15 | |
16 You should have received a copy of the GNU General Public License | |
17 along with GNU Emacs; see the file COPYING. If not, write to | |
18 the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ | |
19 | |
20 | |
21 /* The following line tells the configuration script what sort of | |
22 operating system this machine is likely to run. | |
23 USUAL-OPSYS="note" | |
24 | |
25 NOTE-START | |
26 Use -opsystem=bsd4-2, or -opsystem=bsd4-3 on newer systems. | |
27 NOTE-END */ | |
28 | |
29 /* NOTE: this file works for DYNIX release 2.0 | |
30 (not tested on 1.3) on NS32000's */ | |
31 | |
32 /* The following three symbols give information on | |
33 the size of various data types. */ | |
34 | |
35 #define SHORTBITS 16 /* Number of bits in a short */ | |
36 | |
37 #define INTBITS 32 /* Number of bits in an int */ | |
38 | |
39 #define LONGBITS 32 /* Number of bits in a long */ | |
40 | |
9095
23f72b18b420
(WORDS_BIG_ENDIAN): define or undef appropriately, superseding BIG_ENDIAN.
Karl Heuer <kwzh@gnu.org>
parents:
8892
diff
changeset
|
41 /* Define WORDS_BIG_ENDIAN iff lowest-numbered byte in a word |
23f72b18b420
(WORDS_BIG_ENDIAN): define or undef appropriately, superseding BIG_ENDIAN.
Karl Heuer <kwzh@gnu.org>
parents:
8892
diff
changeset
|
42 is the most significant byte. */ |
23f72b18b420
(WORDS_BIG_ENDIAN): define or undef appropriately, superseding BIG_ENDIAN.
Karl Heuer <kwzh@gnu.org>
parents:
8892
diff
changeset
|
43 |
23f72b18b420
(WORDS_BIG_ENDIAN): define or undef appropriately, superseding BIG_ENDIAN.
Karl Heuer <kwzh@gnu.org>
parents:
8892
diff
changeset
|
44 #undef WORDS_BIG_ENDIAN |
23f72b18b420
(WORDS_BIG_ENDIAN): define or undef appropriately, superseding BIG_ENDIAN.
Karl Heuer <kwzh@gnu.org>
parents:
8892
diff
changeset
|
45 |
456 | 46 /* Define NO_ARG_ARRAY if you cannot take the address of the first of a |
47 * group of arguments and treat it as an array of the arguments. */ | |
48 | |
49 /* #define NO_ARG_ARRAY */ | |
50 | |
51 /* Define WORD_MACHINE if addresses and such have | |
52 * to be corrected before they can be used as byte counts. */ | |
53 | |
54 /* #define WORD_MACHINE */ | |
55 | |
56 /* Now define a symbol for the cpu type, if your compiler | |
57 does not define it automatically: | |
58 vax, m68000, ns16000, pyramid, orion, tahoe and APOLLO | |
59 are the ones defined so far. */ | |
60 | |
61 /* BTW: DYNIX defines sequent, ns32000, and ns16000 (GENIX compatibility) */ | |
62 #ifndef sequent /* pre DYNIX 2.1 releases */ | |
63 # define sequent | |
64 #endif | |
65 | |
66 /* Use type int rather than a union, to represent Lisp_Object */ | |
67 /* This is desirable for most machines. */ | |
68 | |
69 #define NO_UNION_TYPE | |
70 | |
71 /* crt0.c should use the vax-bsd style of entry, with these dummy args. */ | |
72 | |
73 #define CRT0_DUMMIES bogus_fp, | |
74 | |
75 /* crt0.c should define a symbol `start' and do .globl with a dot. */ | |
76 | |
77 #define DOT_GLOBAL_START | |
78 | |
79 /* Define EXPLICIT_SIGN_EXTEND if XINT must explicitly sign-extend | |
80 the 24-bit bit field into an int. In other words, if bit fields | |
81 are always unsigned. | |
82 | |
83 If you use NO_UNION_TYPE, this flag does not matter. */ | |
84 | |
85 #define EXPLICIT_SIGN_EXTEND | |
86 | |
87 /* Data type of load average, as read out of kmem. */ | |
88 | |
89 #define LOAD_AVE_TYPE unsigned long | |
90 | |
91 /* Convert that into an integer that is 100 for a load average of 1.0 */ | |
92 | |
93 #define FSCALE 1000.0 | |
94 #define LOAD_AVE_CVT(x) (int) (((double) (x)) * 100.0 / FSCALE) | |
95 | |
96 /* Define CANNOT_DUMP on machines where unexec does not work. | |
97 Then the function dump-emacs will not be defined | |
98 and temacs will do (load "loadup") automatically unless told otherwise. */ | |
99 | |
100 /* #define CANNOT_DUMP */ | |
101 | |
102 /* Define VIRT_ADDR_VARIES if the virtual addresses of | |
103 pure and impure space as loaded can vary, and even their | |
104 relative order cannot be relied on. | |
105 | |
106 Otherwise Emacs assumes that text space precedes data space, | |
107 numerically. */ | |
108 | |
109 /* #define VIRT_ADDR_VARIES */ | |
110 | |
111 /* Define C_ALLOCA if this machine does not support a true alloca | |
112 and the one written in C should be used instead. | |
113 Define HAVE_ALLOCA to say that the system provides a properly | |
114 working alloca function and it should be used. | |
115 Define neither one if an assembler-language alloca | |
116 in the file alloca.s should be used. */ | |
117 | |
118 /* #define C_ALLOCA */ | |
119 #define HAVE_ALLOCA | |
120 | |
121 /* Name of file the to look in | |
122 for the kernel symbol table (for load average) */ | |
123 | |
124 #undef KERNEL_FILE | |
125 #define KERNEL_FILE "/dynix" | |
126 | |
127 /* Avoids a compiler bug */ | |
128 | |
129 #define TAHOE_REGISTER_BUG | |
130 | |
131 /* Say that the text segment of a.out includes the header; | |
132 the header actually occupies the first few bytes of the text segment | |
133 and is counted in hdr.a_text. Furthermore, the value written | |
134 in the a_text in the file must have N_ADDRADJ added to it. */ | |
135 | |
136 #define A_TEXT_OFFSET(HDR) (sizeof (HDR) + N_ADDRADJ (HDR)) | |
137 | |
138 /* This is the offset of the executable's text, from the start of the file. */ | |
139 | |
140 #define A_TEXT_SEEK(HDR) (N_TXTOFF (hdr) + sizeof (hdr)) | |
141 | |
142 /* (short) negative-int doesn't sign-extend correctly */ | |
143 #define SHORT_CAST_BUG | |
144 | |
145 /* Cause compilations to be done in parallel in ymakefile. */ | |
146 #define MAKE_PARALLEL & | |
147 | |
148 /* Say that mailer interlocking uses flock. */ | |
149 #define MAIL_USE_FLOCK | |
150 | |
151 /* On many 4.2-based systems, there's a rather tricky bug | |
152 * with the interpretation of the pid/pgrp value given to | |
153 * the F_SETOWN fcntl() call. It works as documented EXCEPT | |
154 * when applied to filedescriptors for sockets, in which case | |
155 * the sign must be reversed. If your emacs subprocesses get | |
156 * SIGIO's when they shouldn't, while running on a socket | |
157 * (e.g. under X windows), you should probably define this. | |
158 */ | |
159 | |
160 #define F_SETOWN_SOCK_NEG | |
161 | |
162 /* Some really obscure 4.2-based systems (like Sequent DYNIX) | |
163 * do not support asynchronous I/O (using SIGIO) on sockets, | |
164 * even though it works fine on tty's. If you have one of | |
165 * these systems, define the following, and then use it in | |
166 * config.h (or elsewhere) to decide when (not) to use SIGIO. | |
167 */ | |
168 | |
169 #define NO_SOCK_SIGIO | |
170 | |
171 /* Define how to search all pty names. | |
172 This is for Dynix 3.0; delete next 5 definitions for older systems. */ | |
173 | |
174 #define PTY_MAJOR "pqrstuvwPQRSTUVW" | |
175 #define PTY_MINOR "0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ" | |
176 #define PTY_ITERATION \ | |
177 register int ma, mi; \ | |
178 for (ma = 0; ma < sizeof(PTY_MAJOR) - 1; ma++) \ | |
179 for (mi = 0; mi < sizeof(PTY_MINOR) - 1; mi++) | |
180 #define PTY_NAME_SPRINTF \ | |
181 sprintf (ptyname, "/dev/pty%c%c", PTY_MAJOR[ma], PTY_MINOR[mi]); | |
182 #define PTY_TTY_NAME_SPRINTF \ | |
183 sprintf (ptyname, "/dev/tty%c%c", PTY_MAJOR[ma], PTY_MINOR[mi]); |