Mercurial > emacs
annotate ChangeLog @ 33986:b8323d2419c4
(face): Fix :format.
author | Dave Love <fx@gnu.org> |
---|---|
date | Wed, 29 Nov 2000 11:14:26 +0000 |
parents | b52a012dcac4 |
children | 9ae4dc035d4a |
rev | line source |
---|---|
33819 | 1 2000-11-23 Eli Zaretskii <eliz@is.elta.co.il> |
2 | |
3 * config.bat: Check for existence of djecho.exe, and print an | |
4 error message if it is not available. | |
5 | |
6 * INSTALL: Describe possible problem with djecho.exe in old | |
7 versions of DJGPP v2.x. | |
8 | |
33803 | 9 2000-11-23 Gerd Moellmann <gerd@gnu.org> |
10 | |
11 * configure.in: Initialize HAVE_LIBXP to no. | |
12 | |
33740 | 13 2000-11-22 Gerd Moellmann <gerd@gnu.org> |
14 | |
15 * configure.in: Use m/macppc.h instead of the non-existent | |
16 m/powerpc.h. | |
17 | |
33669 | 18 2000-11-21 Gerd Moellmann <gerd@gnu.org> |
19 | |
33689 | 20 * Makefile.in (install-arch-indep): Also install info/eshell* |
21 and info/speedbar*. | |
22 | |
33669 | 23 * configure.in (HAVE_PNG): Check for the presence of |
24 png_get_channels to rule out older PNG libs. | |
25 | |
33677 | 26 * configure.in (AC_OUTPUT): Arrange to emit definitions of |
27 GCC and NON_GNU_CPP into config.status. | |
28 | |
33650 | 29 2000-11-20 Dave Love <fx@gnu.org> |
30 | |
33652 | 31 * configure.in: Fix last change. |
32 | |
33650 | 33 * GETTING.GNU.SOFTWARE: Deleted. |
34 * FTP: new file to replace it. | |
35 * make-dist: Add FTP, remove GETTING.GNU.SOFTWARE. | |
36 | |
33639 | 37 2000-11-20 Gerd Moellmann <gerd@gnu.org> |
38 | |
39 * configure.in: Use -traditional with GNU cpp. | |
40 | |
33573 | 41 2000-11-17 Gerd Moellmann <gerd@gnu.org> |
42 | |
43 * make-dist: Handle the Mac port. Distribute all makefile.w32-in. | |
44 Distribute more files from the nt/ subdir. Distribute PBM | |
45 image files from subdirs of lisp/. Distribute old change logs | |
46 from subdirs of lisp/. Distribute play/5x5.el. | |
47 | |
33416 | 48 2000-11-11 Dave Love <fx@gnu.org> |
49 | |
50 * config.sub, config.guess: Updated from master source. | |
51 | |
33286 | 52 2000-11-07 Dave Love <fx@gnu.org> |
53 | |
54 * configure.in: Test for mkstemp. | |
55 | |
33117 | 56 2000-11-01 Eli Zaretskii <eliz@is.elta.co.il> |
57 | |
58 * info/dir (Top): Rearrange menu items more logically, and put | |
59 them into a single category. Add menu items for RefTeX and | |
60 Widget. | |
61 | |
33032
ccf845685d1c
install-info syntax compat change.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
32676
diff
changeset
|
62 2000-10-29 Kai Gro,A_(Bjohann <Kai.Grossjohann@CS.Uni-Dortmund.DE> |
ccf845685d1c
install-info syntax compat change.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
32676
diff
changeset
|
63 |
33035 | 64 * Makefile.in (install-arch-indep): Use --info-dir instead of |
65 --dir-file, and a simple argument instead of --info-file, so that | |
66 the Debian version of install-info also works. | |
33032
ccf845685d1c
install-info syntax compat change.
Kai Großjohann <kgrossjo@eu.uu.net>
parents:
32676
diff
changeset
|
67 |
32676 | 68 2000-10-19 Eric M. Ludlam <zappo@ultranet.com> |
69 | |
70 * info/dir (Speedbar): Add entry. | |
71 | |
32558 | 72 2000-10-16 Eli Zaretskii <eliz@is.elta.co.il> |
73 | |
74 * INSTALL: Describe the new image-support options to the configure | |
75 script. List URLs where image support libraries can be found. | |
76 | |
32472 | 77 2000-10-14 Eli Zaretskii <eliz@is.elta.co.il> |
78 | |
79 * info/dir (Top): Add an entry for Eshell. | |
80 | |
32075 | 81 2000-10-02 Dave Love <fx@gnu.org> |
82 | |
83 * configure.in: Check for gai_strerror. | |
84 | |
32057 | 85 2000-10-01 Andreas Schwab <schwab@suse.de> |
86 | |
87 * Makefile.in (install-arch-indep): Update list of installed info | |
88 files. | |
89 | |
32034 | 90 2000-09-30 Gerd Moellmann <gerd@gnu.org> |
91 | |
92 * configure.in: Support `sparc*-*-netbsd*'. | |
93 | |
32010 | 94 2000-09-29 Eli Zaretskii <eliz@is.elta.co.il> |
95 | |
96 * info/dir (MIME): Add entry for emacs-mime. | |
97 | |
31994 | 98 2000-09-29 Dave Love <fx@gnu.org> |
99 | |
100 * configure.in: Fix alpha*-dec-osf4 using the osf5 config. | |
101 | |
31918 | 102 2000-09-26 Gerd Moellmann <gerd@gnu.org> |
103 | |
104 * make-dist: Adapt to the change of leim/Makefile which was | |
105 necessary to ensure a reasonably working `make dist'. | |
106 | |
107 * leim-Makefile.in: Moved to leim/Makefile.in.. | |
108 | |
109 * noleim-Makefile.in: New file, formerly leim/Makefile.in. | |
110 | |
31788 | 111 2000-09-21 Kenichi Handa <handa@etl.go.jp> |
112 | |
113 * leim-Makefile.in (TIT-GB, TIT-BIG5, NON-TIT-GB, NON-TIT-BIG5) | |
114 (NON-TIT-CNS, JAPANESE, KOREAN, THAI, VIETNAMESE, LAO, INDIAN) | |
115 (TIBETAN, LATIN, SLAVIC, GREEK, RUSSIAN, MISC): Rename all .el | |
116 files to .elc. | |
117 (${TIT}): Adjusted for the above change. | |
118 (clean mostlyclean): Likewise. | |
119 (.el.elc): New target. | |
120 | |
31733 | 121 2000-09-19 Gerd Moellmann <gerd@gnu.org> |
122 | |
123 * make-dist: Include XPM and XBM files in lisp/ and subdirs | |
124 in the distribution. | |
125 | |
31696 | 126 2000-09-18 Gerd Moellmann <gerd@gnu.org> |
127 | |
128 * make-dist (skk): Rename to `ja-dic' because the leim directory | |
129 was renamed. | |
130 | |
31613 | 131 2000-09-14 Dave Love <fx@gnu.org> |
132 | |
133 * configure.in: Fix spurion in last change. | |
134 | |
31607 | 135 2000-09-14 Gerd Moellmann <gerd@gnu.org> |
136 | |
137 * configure.in (USE_MMAP_FOR_BUFFERS): Recognize in system | |
138 configuration files instead of REL_ALLOC_MMAP. Set REL_ALLOC | |
139 to `no' if defined. Change result report. | |
140 | |
31517 | 141 2000-09-08 Dave Love <fx@gnu.org> |
142 | |
143 * configure.in: Remove spurious `@'s. | |
144 | |
145 * aclocal.m4 (AC_FUNC_MMAP): Use fixed version from development | |
146 autoconf. | |
147 | |
31409 | 148 2000-09-06 Gerd Moellmann <gerd@gnu.org> |
149 | |
31417 | 150 * configure.in (REL_ALLOC_MMAP): Recognize in system configuration |
151 file and print informational message. | |
152 | |
31409 | 153 * configure.in (AC_FUNC_MMAP): Add. |
154 | |
31320 | 155 2000-09-01 Gerd Moellmann <gerd@gnu.org> |
156 | |
157 * configure.in: Add ``checking'' messages for | |
158 XpmReturnAllocPixels. | |
159 | |
31229 | 160 2000-08-28 Gerd Moellmann <gerd@gnu.org> |
161 | |
162 * configure.in: Check <strings.h>; check `index' and `rindex' | |
163 functions. | |
164 | |
31176 | 165 2000-08-26 Kenichi Handa <handa@etl.go.jp> |
166 | |
167 * configure.in <alpha*-dec-osf*>: Move "NON_GNU_CPP='cpp'" before | |
168 "case "${canonical}" in". | |
169 | |
31249 | 170 2000-08-25 Dave Love <fx@gnu.org> |
171 | |
172 * configure.in <osf>: Use NON_GNU_CPP='cpp' always. | |
173 | |
31162 | 174 2000-08-25 Kenichi Handa <handa@etl.go.jp> |
175 | |
31189
b1854258a0db
It was "skk" that was renamed, not "skkdic".
Eli Zaretskii <eliz@gnu.org>
parents:
31176
diff
changeset
|
176 * leim-Makefile.in: Rename skk to ja-dic throughout the file. |
31162 | 177 |
31153 | 178 2000-08-24 Gerd Moellmann <gerd@gnu.org> |
179 | |
180 * configure.in <making srcdir absolute>: Unset CDPATH in case $PWD | |
181 contains a relative path. Protect against unusable values of | |
182 $PWD. | |
183 | |
30658 | 184 2000-08-08 Eli Zaretskii <eliz@is.elta.co.il> |
185 | |
30664 | 186 * info/dir (WoMan): Add entry. |
187 | |
30658 | 188 * config.bat (maindir): Update src/_gdbinit even if it does |
189 already exist. | |
190 | |
30639 | 191 2000-08-07 Gerd Moellmann <gerd@gnu.org> |
192 | |
193 * Makefile.in (config.status): Prepend `$(srcdir)/' to | |
194 `configure'. | |
195 | |
30576 | 196 2000-08-03 Gerd Moellmann <gerd@gnu.org> |
197 | |
198 * configure.in: Add support for ia64*-*-linux*. | |
199 | |
30516 | 200 2000-07-27 Gerd Moellmann <gerd@gnu.org> |
201 | |
202 * make-dist (aclocal.m4): Include in distribution. | |
203 | |
30466 | 204 2000-07-26 Dave Love <fx@gnu.org> |
205 | |
206 * configure.in (AC_SYS_LARGEFILE): Moved earlier. | |
207 | |
30431 | 208 2000-07-24 Dave Love <fx@gnu.org> |
209 | |
210 * configure.in: Add AC_SIZE_T. | |
211 | |
30311 | 212 2000-07-18 Dave Love <fx@gnu.org> |
213 | |
214 * configure.in: Reorder so that most tests are done after CPPFLAGS | |
215 is set from the C_SWITCH_... definitions. | |
216 | |
30140 | 217 2000-07-10 Gerd Moellmann <gerd@gnu.org> |
218 | |
219 * configure.in (HAVE_XPM): Undo previous change. Check for | |
220 preprocessor define XpmReturnAllocPixels. | |
221 | |
30099 | 222 2000-07-06 Gerd Moellmann <gerd@gnu.org> |
223 | |
224 * configure.in (HAVE_XPM): Check for XpmReturnAllocPixels | |
225 instead of XpmReadFileToPixmap. | |
226 | |
30078
58ce7aad3fff
* configure.in: Check for <soundcard.h>. Look for ossaudio library, and set
Ken Raeburn <raeburn@raeburn.org>
parents:
30069
diff
changeset
|
227 2000-07-05 Ken Raeburn <raeburn@gnu.org> |
58ce7aad3fff
* configure.in: Check for <soundcard.h>. Look for ossaudio library, and set
Ken Raeburn <raeburn@raeburn.org>
parents:
30069
diff
changeset
|
228 |
58ce7aad3fff
* configure.in: Check for <soundcard.h>. Look for ossaudio library, and set
Ken Raeburn <raeburn@raeburn.org>
parents:
30069
diff
changeset
|
229 * configure.in: Check for <soundcard.h>. Look for ossaudio |
58ce7aad3fff
* configure.in: Check for <soundcard.h>. Look for ossaudio library, and set
Ken Raeburn <raeburn@raeburn.org>
parents:
30069
diff
changeset
|
230 library, and set LIBSOUND accordingly. |
58ce7aad3fff
* configure.in: Check for <soundcard.h>. Look for ossaudio library, and set
Ken Raeburn <raeburn@raeburn.org>
parents:
30069
diff
changeset
|
231 |
30069 | 232 2000-07-05 Dave Love <fx@gnu.org> |
233 | |
234 * configure.in: Use AC_HEADER_SYS_WAIT. | |
235 | |
30049 | 236 2000-07-05 Gerd Moellmann <gerd@gnu.org> |
237 | |
238 * make-dist: Check DONTCOMPILE in lisp/Makefile.in instead of | |
239 lisp/Makefile. Distribute lisp/Makefile.in instead of | |
240 lisp/Makefile. | |
241 | |
29990
98af0f021739
* configure.in: Add ${C_SWITCH_X_SITE} temporarily to CPPFLAGS, while
Ken Raeburn <raeburn@raeburn.org>
parents:
29949
diff
changeset
|
242 2000-06-30 Ken Raeburn <raeburn@gnu.org> |
98af0f021739
* configure.in: Add ${C_SWITCH_X_SITE} temporarily to CPPFLAGS, while
Ken Raeburn <raeburn@raeburn.org>
parents:
29949
diff
changeset
|
243 |
98af0f021739
* configure.in: Add ${C_SWITCH_X_SITE} temporarily to CPPFLAGS, while
Ken Raeburn <raeburn@raeburn.org>
parents:
29949
diff
changeset
|
244 * configure.in: Add ${C_SWITCH_X_SITE} temporarily to CPPFLAGS, |
98af0f021739
* configure.in: Add ${C_SWITCH_X_SITE} temporarily to CPPFLAGS, while
Ken Raeburn <raeburn@raeburn.org>
parents:
29949
diff
changeset
|
245 while searching for image-handling libraries. |
98af0f021739
* configure.in: Add ${C_SWITCH_X_SITE} temporarily to CPPFLAGS, while
Ken Raeburn <raeburn@raeburn.org>
parents:
29949
diff
changeset
|
246 |
29949 | 247 2000-06-26 Gerd Moellmann <gerd@gnu.org> |
248 | |
249 * configure.in (--with-xim): New option. | |
250 | |
29902 | 251 2000-06-23 Dave Love <fx@gnu.org> |
252 | |
253 * configure.in [HAVE_TIMEVAL]: Move gettimeofday test here, test | |
254 for struct timezone and test how we can call gettimeofday. | |
29906 | 255 Check for OSF 5+. Check for term.h. |
29902 | 256 |
257 * aclocal.m4: Define the post-2.13 stuff conditionally on autoconf | |
258 version. | |
259 | |
29868 | 260 2000-06-23 Gerd Moellmann <gerd@gnu.org> |
261 | |
262 * configure.in (HAVE_LIBXP): Change test for libXp. | |
263 | |
29834 | 264 2000-06-21 Dave Love <fx@gnu.org> |
265 | |
266 * configure.in: Check for fcntl.h. Use AC_FUNC_GETLOADAVG, not | |
267 simple test for getloadavg and substitute GETLOADAVG_LIBS. | |
268 Simplify test for GETTIMEOFDAY_ONE_ARGUMENT. | |
269 | |
29733 | 270 2000-06-19 Dave Love <fx@gnu.org> |
271 | |
272 * configure.in (GETTIMEOFDAY_ONE_ARGUMENT): Fix in case | |
273 _XOPEN_SOURCE is defined. | |
274 | |
29702 | 275 2000-06-16 Gerd Moellmann <gerd@gnu.org> |
276 | |
277 * Makefile.in (distclean): Also make distclean in lisp/. | |
278 | |
29682 | 279 2000-06-15 Eli Zaretskii <eliz@is.elta.co.il> |
280 | |
281 * config.bat: Generate lisp/Makefile from lisp/Makefile.in. | |
282 | |
29673 | 283 2000-06-15 Gerd Moellmann <gerd@gnu.org> |
284 | |
285 * make-dist: Add --help and --snapshot options. | |
286 | |
29654 | 287 2000-06-14 Gerd Moellmann <gerd@gnu.org> |
288 | |
29657 | 289 * configure.in: Generate lisp/Makefile. |
290 | |
29654 | 291 * configure.in: Add support for `*-lynxos*'. |
292 Use `cpp' as NON_GNU_CPP for `alpha*-dec-osf[5-9]*', as | |
293 recommended by <Karen.Dorhamer@compaq.com> to fix problems | |
294 on Tru64 UNIX v5.0. | |
295 | |
29623
5cc6c13b5376
* Makefile.in (install-arch-indep): Don't use "-unset CDPATH" when it's on a
Ken Raeburn <raeburn@raeburn.org>
parents:
29397
diff
changeset
|
296 2000-06-13 Ken Raeburn <raeburn@gnu.org> |
5cc6c13b5376
* Makefile.in (install-arch-indep): Don't use "-unset CDPATH" when it's on a
Ken Raeburn <raeburn@raeburn.org>
parents:
29397
diff
changeset
|
297 |
5cc6c13b5376
* Makefile.in (install-arch-indep): Don't use "-unset CDPATH" when it's on a
Ken Raeburn <raeburn@raeburn.org>
parents:
29397
diff
changeset
|
298 * Makefile.in (install-arch-indep): Don't use "-unset CDPATH" when |
5cc6c13b5376
* Makefile.in (install-arch-indep): Don't use "-unset CDPATH" when it's on a
Ken Raeburn <raeburn@raeburn.org>
parents:
29397
diff
changeset
|
299 it's on a continuation line. |
5cc6c13b5376
* Makefile.in (install-arch-indep): Don't use "-unset CDPATH" when it's on a
Ken Raeburn <raeburn@raeburn.org>
parents:
29397
diff
changeset
|
300 |
29388 | 301 2000-06-02 Dave Love <fx@gnu.org> |
302 | |
29397 | 303 * Makefile.in: (install-arch-indep): Add pcl-cvs to list of info |
304 files. | |
305 | |
29388 | 306 * configure.in: Don't specify -n32 flag for mips-sgi-irix6.5. |
307 Check for struct exception. Use AC_SYS_LARGEFILE and move ftello | |
308 test. | |
309 | |
310 * aclocal.m4 (AC_SYS_LARGEFILE_TEST_INCLUDES) | |
311 (AC_SYS_LARGEFILE_MACRO_VALUE, AC_SYS_LARGEFILE): New. | |
312 | |
29254 | 313 2000-05-26 Gerd Moellmann <gerd@gnu.org> |
314 | |
315 * configure.in: Add check for speed_t typedef. | |
316 | |
29197
c58cb815dcfd
* Makefile.in (install-arch-dep): Install fns-*.el only if it
Ken Raeburn <raeburn@raeburn.org>
parents:
29178
diff
changeset
|
317 2000-05-25 Ken Raeburn <raeburn@gnu.org> |
c58cb815dcfd
* Makefile.in (install-arch-dep): Install fns-*.el only if it
Ken Raeburn <raeburn@raeburn.org>
parents:
29178
diff
changeset
|
318 |
c58cb815dcfd
* Makefile.in (install-arch-dep): Install fns-*.el only if it
Ken Raeburn <raeburn@raeburn.org>
parents:
29178
diff
changeset
|
319 * Makefile.in (install-arch-dep): Install fns-*.el only if it |
c58cb815dcfd
* Makefile.in (install-arch-dep): Install fns-*.el only if it
Ken Raeburn <raeburn@raeburn.org>
parents:
29178
diff
changeset
|
320 exists; it won't in the CANNOT_DUMP case. |
c58cb815dcfd
* Makefile.in (install-arch-dep): Install fns-*.el only if it
Ken Raeburn <raeburn@raeburn.org>
parents:
29178
diff
changeset
|
321 |
29177 | 322 2000-05-25 Gerd Moellmann <gerd@gnu.org> |
323 | |
29178 | 324 * Makefile.in: Ignore exit status of `unset CDPATH' everywhere. |
325 On FreeBSD, the exit status is 1 if CDPATH is not set. | |
29222 | 326 (install-arch-indep): Install ebrowse.info. |
29177 | 327 |
29036 | 328 2000-05-20 NIIBE Yutaka <gniibe@mri.co.jp> |
329 | |
330 * configure.in: Check for grandpt and getpt. | |
331 | |
28851 | 332 2000-05-09 Dave Love <fx@gnu.org> |
333 | |
334 * Makefile.in (install-arch-indep): Filter CVS as well as RCS. | |
335 | |
28823 | 336 2000-05-05 Gerd Moellmann <gerd@gnu.org> |
337 | |
338 * make-dist: Make a link for lib-src/grep-changelog. Copy | |
339 install-sh. | |
340 | |
28769 | 341 2000-05-01 Eli Zaretskii <eliz@is.elta.co.il> |
342 | |
343 * config.bat: Identify the beginning of the cpp stuff in | |
344 src/Makefile.in and lib-src/Makefile.in more accurately. | |
345 | |
28748 | 346 2000-04-27 Gerd Moellmann <gerd@gnu.org> |
347 | |
348 * configure.in: Add support for `powerpc*-*-linux-gnu*'. | |
349 | |
28653 | 350 2000-04-19 Gerd Moellmann <gerd@gnu.org> |
351 | |
352 * configure.in: Add support for `powerpc-*-netbsd*'. | |
353 | |
28639 | 354 2000-04-19 Dave Love <fx@gnu.org> |
355 | |
28643 | 356 * configure.in: Don't use AC_FUNC_GETLOADAVG. |
357 | |
28639 | 358 * aclocal.m4 (AC_FUNC_MKTIME): Use AC_SUBST. |
359 | |
28606 | 360 2000-04-16 Dave Love <fx@gnu.org> |
361 | |
362 * Makefile.in (${srcdir}/configure): Depend on aclocal.m4. | |
363 | |
28604 | 364 2000-04-14 Dave Love <fx@gnu.org> |
365 | |
366 * configure.in: Use AC_FUNC_GETLOADAVG, AC_FUNC_MKTIME. | |
367 | |
368 * aclocal.m4 (AC_FUNC_MKTIME): New. | |
369 | |
28418
5b7b3b5d54df
* configure.in: Line up "--help" output a little better.
Ken Raeburn <raeburn@raeburn.org>
parents:
28320
diff
changeset
|
370 2000-03-28 Ken Raeburn <raeburn@gnu.org> |
5b7b3b5d54df
* configure.in: Line up "--help" output a little better.
Ken Raeburn <raeburn@raeburn.org>
parents:
28320
diff
changeset
|
371 |
5b7b3b5d54df
* configure.in: Line up "--help" output a little better.
Ken Raeburn <raeburn@raeburn.org>
parents:
28320
diff
changeset
|
372 * configure.in: Line up "--help" output a little better. |
5b7b3b5d54df
* configure.in: Line up "--help" output a little better.
Ken Raeburn <raeburn@raeburn.org>
parents:
28320
diff
changeset
|
373 |
28320 | 374 2000-03-26 Gerd Moellmann <gerd@gnu.org> |
375 | |
29036 | 376 * Makefile.in (bootstrap-lisp-1, bootstrap-lisp, bootstrap-src): |
28320 | 377 New targets. |
378 (bootstrap): Rewritten in terms of the new targets above. Make | |
379 info files, too. | |
380 | |
28109 | 381 2000-03-12 Gerd Moellmann <gerd@gnu.org> |
382 | |
383 * config.guess, config.sub: Use the versions of the files from | |
384 subversions. | |
385 | |
28060 | 386 2000-03-08 Dave Love <fx@gnu.org> |
387 | |
388 * configure.in: Use AC_PROG_RANLIB, AC_C_PROTOTYPES, | |
389 AC_C_VOLATILE. Define POINTER_TYPE. | |
390 | |
391 * aclocal.m4: New file. | |
392 | |
27949 | 393 2000-03-02 Gerd Moellmann <gerd@gnu.org> |
27927 | 394 |
395 * configure.in (machine): Add `mipsel-*-netbsd*' and | |
396 `arm-*-netbsd*'. | |
27949 | 397 |
398 2000-03-01 Gerd Moellmann <gerd@gnu.org> | |
399 | |
400 * configure.in (machine): Add support for `*-auspex-sunos*'. | |
401 | |
27910 | 402 2000-02-29 Gerd Moellmann <gerd@gnu.org> |
403 | |
404 * configure.in (C_OPTIMIZE_SWITCH) [__GNUC__]: Use -O2. | |
405 | |
27767 | 406 2000-02-18 Dave Love <fx@gnu.org> |
407 | |
408 * configure.in: Define NON_GNU_CPP on alpha-dec-osf5+. | |
409 | |
27762 | 410 2000-02-18 Andreas Schwab <schwab@suse.de> |
411 | |
412 * Makefile.in (install-arch-indep): Add eudc to list of installed | |
413 info files. | |
414 | |
27752
7ee8155d48c5
include -lz and -ljpeg when testing for -ltiff
Ken Raeburn <raeburn@raeburn.org>
parents:
27729
diff
changeset
|
415 2000-02-17 Ken Raeburn <raeburn@gnu.org> |
7ee8155d48c5
include -lz and -ljpeg when testing for -ltiff
Ken Raeburn <raeburn@raeburn.org>
parents:
27729
diff
changeset
|
416 |
7ee8155d48c5
include -lz and -ljpeg when testing for -ltiff
Ken Raeburn <raeburn@raeburn.org>
parents:
27729
diff
changeset
|
417 * configure.in: Include -lz and -ljpeg (if it's available) when |
7ee8155d48c5
include -lz and -ljpeg when testing for -ltiff
Ken Raeburn <raeburn@raeburn.org>
parents:
27729
diff
changeset
|
418 testing for the tiff library. |
7ee8155d48c5
include -lz and -ljpeg when testing for -ltiff
Ken Raeburn <raeburn@raeburn.org>
parents:
27729
diff
changeset
|
419 |
27729 | 420 2000-02-17 Gerd Moellmann <gerd@gnu.org> |
421 | |
422 * configure.in: Remove LISP_FLOAT_TYPE. | |
423 | |
27675 | 424 2000-02-12 Dave Love <fx@gnu.org> |
425 | |
426 * configure.in: Use AC_FUNC_VFORK. | |
427 | |
27557 | 428 2000-02-01 Gerd Moellmann <gerd@gnu.org> |
429 | |
27563 | 430 * make-dist: Various fixes for new development tree. |
431 | |
27557 | 432 * leim-Makefile.in: New file. |
433 | |
27531 | 434 2000-01-31 Gerd Moellmann <gerd@gnu.org> |
435 | |
436 * Makefile.in (dist): Call ./make-dist. | |
437 | |
27413 | 438 2000-01-24 Dave Love <fx@gnu.org> |
439 | |
440 * configure.in: Remove -G0 from Irix NON_GCC_TEST_OPTIONS. | |
441 | |
27356 | 442 2000-01-18 Gerd Moellmann <gerd@gnu.org> |
443 | |
444 * configure.in (HAVE_GIF): Check for DGifOpen instead of | |
445 DGifOpenFileName. | |
446 | |
27273 | 447 2000-01-11 Andreas Schwab <schwab@suse.de> |
448 | |
449 * Makefile.in (install-arch-indep): Update list of info files to | |
450 be installed. | |
451 | |
27205 | 452 2000-01-05 Dave Love <fx@gnu.org> |
453 | |
454 * configure.in: Check for jerror.h as well as libjpeg. | |
455 | |
27099 | 456 2000-01-03 Andreas Schwab <schwab@suse.de> |
457 | |
458 * Makefile.in (install-arch-indep): Install autotype*. Run | |
459 install-info on autotype and emacs-faq.info. | |
460 | |
26708 | 461 1999-12-04 Dave Love <fx@gnu.org> |
462 | |
463 * Makefile.in: (install-arch-indep): Depend on `info'. | |
464 (install-strip): Use `install' as sub-make target. | |
465 | |
26562
b32d82817493
* configure.in: Restore Kerberos code deleted on 1999-05-29 that didn't need to
Ken Raeburn <raeburn@raeburn.org>
parents:
26502
diff
changeset
|
466 1999-11-23 Ken Raeburn <raeburn@gnu.org> |
b32d82817493
* configure.in: Restore Kerberos code deleted on 1999-05-29 that didn't need to
Ken Raeburn <raeburn@raeburn.org>
parents:
26502
diff
changeset
|
467 |
b32d82817493
* configure.in: Restore Kerberos code deleted on 1999-05-29 that didn't need to
Ken Raeburn <raeburn@raeburn.org>
parents:
26502
diff
changeset
|
468 * configure.in: Restore Kerberos code deleted on 1999-05-29 that |
b32d82817493
* configure.in: Restore Kerberos code deleted on 1999-05-29 that didn't need to
Ken Raeburn <raeburn@raeburn.org>
parents:
26502
diff
changeset
|
469 didn't need to be deleted. Check for the k5crypto library as well |
b32d82817493
* configure.in: Restore Kerberos code deleted on 1999-05-29 that didn't need to
Ken Raeburn <raeburn@raeburn.org>
parents:
26502
diff
changeset
|
470 as the crypto library; MIT Kerberos 1.1 changed the name. |
b32d82817493
* configure.in: Restore Kerberos code deleted on 1999-05-29 that didn't need to
Ken Raeburn <raeburn@raeburn.org>
parents:
26502
diff
changeset
|
471 |
26502 | 472 1999-11-18 Dave Love <fx@gnu.org> |
473 | |
474 * configure.in: Fix NON_GNU_CPP for Irix 6 to avoid failing tests. | |
475 | |
26413 | 476 1999-11-11 Erik Naggum <erik@naggum.no> |
477 | |
478 * configure.in (bitmapdir): Allow for both "bitmaps" directories. | |
479 | |
26383 | 480 1999-11-08 Dave Love <fx@gnu.org> |
481 | |
482 * configure.in: Fix change for --with-pop default. | |
483 | |
26355 | 484 1999-11-04 Dave Love <fx@gnu.org> |
485 | |
486 * configure.in: Default to --with-pop. Change sense of with-gcc | |
487 and with-toolkit-scroll-bars messages to reflect the defaults. | |
488 | |
26271 | 489 1999-11-01 Gerd Moellmann <gerd@gnu.org> |
490 | |
491 * INSTALL: Mention the Emacs Lisp Reference. | |
492 | |
26215 | 493 1999-10-27 Noah Friedman <friedman@splode.com> |
494 | |
495 * configure.in: Check for dynamic ptys (/dev/ptmx, /dev/pts/). | |
496 | |
26148 | 497 1999-10-23 Gerd Moellmann <gerd@gnu.org> |
498 | |
499 * Makefile.in (bootstrap): New target. | |
500 | |
26081
bfa8d94330b6
Add support for large files. Merge glibc 2.1.2.
Paul Eggert <eggert@twinsun.com>
parents:
25968
diff
changeset
|
501 1999-10-19 Paul Eggert <eggert@twinsun.com> |
bfa8d94330b6
Add support for large files. Merge glibc 2.1.2.
Paul Eggert <eggert@twinsun.com>
parents:
25968
diff
changeset
|
502 |
bfa8d94330b6
Add support for large files. Merge glibc 2.1.2.
Paul Eggert <eggert@twinsun.com>
parents:
25968
diff
changeset
|
503 Add support for large files. Merge glibc 2.1.2. |
bfa8d94330b6
Add support for large files. Merge glibc 2.1.2.
Paul Eggert <eggert@twinsun.com>
parents:
25968
diff
changeset
|
504 |
bfa8d94330b6
Add support for large files. Merge glibc 2.1.2.
Paul Eggert <eggert@twinsun.com>
parents:
25968
diff
changeset
|
505 * configure.in (AC_CHECK_HEADERS): Add stdio_ext.h. |
bfa8d94330b6
Add support for large files. Merge glibc 2.1.2.
Paul Eggert <eggert@twinsun.com>
parents:
25968
diff
changeset
|
506 (HAVE_TM_GMTOFF): New symbol. |
bfa8d94330b6
Add support for large files. Merge glibc 2.1.2.
Paul Eggert <eggert@twinsun.com>
parents:
25968
diff
changeset
|
507 (AC_CHECK_FUNCS): Add __fpending, ftello, getloadavg, mblen, |
bfa8d94330b6
Add support for large files. Merge glibc 2.1.2.
Paul Eggert <eggert@twinsun.com>
parents:
25968
diff
changeset
|
508 mbrlen, strsignal. |
bfa8d94330b6
Add support for large files. Merge glibc 2.1.2.
Paul Eggert <eggert@twinsun.com>
parents:
25968
diff
changeset
|
509 (LOCALTIME_CACHE): Don't include stdlib.h, as config.h does this now. |
bfa8d94330b6
Add support for large files. Merge glibc 2.1.2.
Paul Eggert <eggert@twinsun.com>
parents:
25968
diff
changeset
|
510 |
25968 | 511 1999-10-09 Stefan Monnier <monnier@cs.yale.edu> |
512 | |
513 * make-dist (dontcompile): look for the DONTCOMPILE variable rather | |
514 than the obsolete dontcompilefiles pseudo-rule in lisp/Makefile. | |
515 | |
25952
b7a1e1e9e668
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
25932
diff
changeset
|
516 1999-10-09 Richard M. Stallman <rms@gnu.org> |
b7a1e1e9e668
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
25932
diff
changeset
|
517 |
b7a1e1e9e668
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
25932
diff
changeset
|
518 * Makefile.in (uninstall, install-arch-indep, install-arch-dep): |
b7a1e1e9e668
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
25932
diff
changeset
|
519 Unset CDPATH to prevent cd from generating output. |
b7a1e1e9e668
*** empty log message ***
Richard M. Stallman <rms@gnu.org>
parents:
25932
diff
changeset
|
520 |
25932
603508917c34
*** empty log message ***
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
25916
diff
changeset
|
521 1999-10-08 Stefan Monnier <monnier@cs.yale.edu> |
603508917c34
*** empty log message ***
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
25916
diff
changeset
|
522 |
603508917c34
*** empty log message ***
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
25916
diff
changeset
|
523 * update-subdirs: also ignore CVS subdirs. |
603508917c34
*** empty log message ***
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
25916
diff
changeset
|
524 |
25916 | 525 1999-10-07 Gerd Moellmann <gerd@gnu.org> |
526 | |
527 * Makefile.in (install-arch-indep): Add ada-mode. | |
528 | |
25880 | 529 1999-10-06 Dave Love <fx@gnu.org> |
530 | |
531 * Makefile.in: Add rules for config.status, configure. | |
532 | |
25856 | 533 1999-09-07 Gerd Moellmann <gerd@gnu.org> |
534 | |
535 * configure.in (--with-sound): Removed. | |
536 | |
537 1999-08-30 Gerd Moellmann <gerd@gnu.org> | |
538 | |
539 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move the test down after | |
540 the test for Xaw3d. | |
541 (HAVE_TIFF): Add -lm to library check. | |
542 | |
543 1999-08-28 Richard Stallman <rms@gnu.org> | |
544 | |
545 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move tests for | |
546 -lXaw3d, -lXpm, -ljpeg, -lpng, -ltiff, and -lgif, down | |
547 after the other X-related libraries. | |
548 | |
549 1999-08-21 Dave Love <fx@gnu.org> | |
550 | |
551 * configure.in: Don't check for jpeglib.h. | |
552 | |
553 1999-08-20 Gerd Moellmann <gerd@gnu.org> | |
554 | |
555 * configure.in (HAVE_TIFF): Remove tiff34 prefix from tiffio.h. | |
556 (HAVE_XAW3D): Don't check for Xaw3d if USE_X_TOOLKIT=none. | |
557 | |
558 1999-08-18 Dave Love <fx@gnu.org> | |
559 | |
560 * configure.in: : Check for termcap.h. | |
561 | |
562 1999-08-15 Gerd Moellmann <gerd@gnu.org> | |
563 | |
564 * configure.in: Add --with-toolkit-scroll-bars. If "no", | |
565 use Emacs' scroll bars, even if configured for Motif or when | |
566 Xaw3d is available. | |
567 | |
568 1999-08-12 Wolfgang Rupprecht <wolfgang@wsrcc.com> | |
569 | |
570 * configure.in: Check for getaddrinfo. | |
571 | |
572 1999-08-04 Eli Zaretskii <eliz@gnu.org> | |
573 | |
574 * config.bat: Make --no-debug work again by removing -gcoff. | |
575 | |
576 1999-07-30 Dave Love <fx@gnu.org> | |
577 | |
578 * configure.in: Check for stdlib.h. | |
579 | |
580 1999-07-19 Dave Love <fx@gnu.org> | |
581 | |
582 * configure.in: Grok sparc64-*-linux-gnu*. | |
583 | |
31883 | 584 After the release of 20.4, development was split into two separate |
585 code lines. One line contained the code for Emacs 21, and the other | |
586 one the code for the 20.x releases after 20.4. The following change | |
587 log entries up to the entry ``20.4 released'' are for the 20.x code | |
588 line. Change logs above this notice are those for the 21.x code line. | |
589 | |
590 2000-06-13 Gerd Moellmann <gerd@gnu.org> | |
591 | |
592 * Version 20.7 released. | |
593 | |
594 2000-06-05 Gerd Moellmann <gerd@gnu.org> | |
595 | |
596 * configure.in: Add powerpc*-*-linux-gnu*. | |
597 | |
598 2000-05-20 NIIBE Yutaka <gniibe@mri.co.jp> | |
599 | |
600 * configure.in: Check for grandpt and getpt. | |
601 | |
602 2000-02-26 Gerd Moellmann <gerd@gnu.org> | |
603 | |
604 * Version 20.6 released. | |
605 | |
606 2000-02-18 Dave Love <fx@gnu.org> | |
607 | |
608 * configure.in: Define NON_GNU_CPP on alpha-dec-osf5+. | |
609 | |
610 2000-02-15 Gerd Moellmann <gerd@gnu.org> | |
611 | |
612 * configure.in: Add support for arm*-g*-linux-gnu* systems. | |
613 | |
614 1999-12-04 Gerd Moellmann <gerd@gnu.org> | |
615 | |
616 * Version 20.5 released. | |
617 | |
618 1999-11-28 Dave Love <fx@gnu.org> | |
619 | |
620 * configure.in: Recognize sparc64-*-linux-gnu*. | |
621 | |
622 1999-11-11 Erik Naggum <erik@naggum.no> | |
623 | |
624 * configure.in (bitmapdir): Allow for both "bitmaps" directories. | |
625 | |
626 1999-08-04 Eli Zaretskii <eliz@gnu.org> | |
627 | |
628 * config.bat: Make --no-debug work again by removing -gcoff. | |
629 | |
25856 | 630 1999-07-12 Richard Stallman <rms@gnu.org> |
631 | |
632 * Version 20.4 released. | |
633 | |
634 1999-06-23 Karl Heuer <kwzh@gnu.org> | |
635 | |
636 * make-dist: Unset EMACS_UNIBYTE, so Emacs runs in its default state. | |
637 Quote $EMACS, in case it's a program with args. | |
638 | |
639 1999-05-29 Richard M. Stallman <rms@gnu.org> | |
640 | |
641 * configure.in: Delete the Kerberos stuff. | |
642 | |
643 1999-05-27 Greg Hudson <ghudson@mit.edu> | |
644 | |
645 * configure.in: Prefer kerberos 5 names. | |
646 | |
647 1999-04-26 Richard M. Stallman <rms@gnu.org> | |
648 | |
649 * configure.in: Check for libXp. | |
650 | |
651 1999-04-08 Richard Stallman <rms@gnu.org> | |
652 | |
653 * make-dist: Include change logs in subdirs of `lisp'. | |
654 | |
655 1999-04-05 Richard Stallman <rms@gnu.org> | |
656 | |
657 * Makefile.in (mkdir): If we create ${datadir}, make it world-readable. | |
658 (install-arch-indep): Make ${datadir}/emacs world-readable. | |
659 | |
660 1999-03-30 Eli Zaretskii <eliz@gnu.org> | |
661 | |
662 * config.bat: Use epaths.* instead of paths.*. | |
663 | |
664 1999-03-07 Eli Zaretskii <eliz@gnu.org> | |
665 | |
666 * INSTALL: Add detailed instructions to unpack and install | |
667 intlfonts on MS-DOS. | |
668 | |
669 1999-02-26 Richard Stallman <rms@gnu.org> | |
670 | |
671 * configure.in: Use epaths.h and epaths-force instead of paths.... | |
672 | |
673 * Makefile.in (epaths-force): Renamed from paths-force; | |
674 operate on epaths.in and produce epaths.h. | |
675 | |
676 1999-02-24 Richard Stallman <rms@gnu.org> | |
677 | |
678 * make-dist: Fix nt/icons directory handling. | |
679 | |
680 1999-02-22 Simon Josefsson <jas@pdc.kth.se> | |
681 | |
682 * configure.in (f301-fujitsu-uxpv4.1): New target. | |
683 | |
684 1999-02-20 Richard Stallman <rms@gnu.org> | |
685 | |
686 * make-dist (tempparent): Fix command to update info files. | |
687 | |
688 1999-02-09 Richard Stallman <rms@gnu.org> | |
689 | |
690 * configure.in (powerpc-apple-netbsd*): New alternative. | |
691 | |
692 1999-01-25 Geoff Voelker <voelker@cs.washington.edu> | |
693 | |
694 * make-dist: Include the new directory nt/icons in distributions. | |
695 | |
696 1999-01-19 Richard Stallman <rms@psilocin.ai.mit.edu> | |
697 | |
698 * configure.in: Change message about HAVE_XFREE386. | |
699 | |
700 1999-01-07 Eli Zaretskii <eliz@gnu.org> | |
701 | |
702 * config.bat: Support configuring with leim. | |
703 | |
704 1998-12-16 Petri Kaurinkoski <Petri.Kaurinkoski@hut.fi> | |
705 | |
706 * configure.in (mips-sgi-irix6.5): New target. | |
707 | |
708 1998-12-16 Jonathan I. Kamens <jik@kamens.brookline.ma.us> | |
709 | |
710 * configure.in: Remove GSS-API support, since it has been removed | |
711 from movemail. | |
712 | |
713 1998-12-04 Markus Rost <rost@delysid.gnu.org> | |
714 | |
715 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src. | |
716 | |
717 1998-12-04 Andreas Schwab <schwab@delysid.gnu.org> | |
718 | |
719 * Makefile.in: Don't install customize info file. Run | |
720 install-info on viper info file. | |
721 | |
722 1998-11-29 Richard Stallman <rms@psilocin.ai.mit.edu> | |
723 | |
724 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src. | |
725 | |
726 1998-11-16 Kenichi Handa <handa@etl.go.jp> | |
727 | |
728 * configure.in (*-*-bsdi4*): New target. | |
729 | |
730 1998-11-13 Ehud Karni <ehud@unix.simonwiesel.co.il> | |
731 | |
732 * configure.in: Fix previous change. | |
733 | |
734 1998-11-11 Richard Stallman <rms@gnu.org> | |
735 | |
736 * configure.in (aviion-intel): New machine. | |
737 | |
738 1998-11-04 Kenichi Handa <handa@etl.go.jp> | |
739 | |
740 * configure.in (mips-nec-sysv4*): New target. | |
741 | |
742 1998-11-03 Andreas Schwab <schwab@delysid.gnu.org> | |
743 | |
744 * Makefile.in (install-arch-dep): Fix last change and use fns-*.el | |
745 from lisp. | |
746 | |
747 1998-10-31 Richard Stallman <rms@psilocin.ai.mit.edu> | |
748 | |
749 * make-dist: Don't include fns*.el in dist. | |
750 | |
751 1998-10-30 Dave Love <fx@gnu.org> | |
752 | |
753 * configure.in: Don't mkdir cpp. | |
754 | |
755 1998-10-30 Andreas Schwab <schwab@delysid.gnu.org> | |
756 | |
757 * Makefile.in (install-arch-dep): Install src/fns-*.el in | |
758 ${archlibdir}. | |
759 | |
760 1998-08-19 Richard Stallman <rms@psilocin.ai.mit.edu> | |
761 | |
762 * Version 20.3 released. | |
763 | |
764 1998-07-30 Paul Eggert <eggert@twinsun.com> | |
765 | |
766 * Makefile.in (Makefile, src/Makefile, src/config.stamp) | |
767 (lib-src/Makefile, man/Makefile, oldXMenu/Makefile) | |
768 (lwlib/Makefile, leim/Makefile): | |
769 Prepend $(srcdir)/ to rule dependencies outside this dir. | |
770 | |
771 1998-06-30 Richard Stallman <rms@psilocin.ai.mit.edu> | |
772 | |
773 * configure.in: Use unset CDPATH instead of making it empty. | |
774 | |
775 1998-06-20 Karl Heuer <kwzh@gnu.org> | |
776 | |
777 * configure.in: Assume unspecified Solaris is 2.5, not 2.4. | |
778 | |
779 1998-06-07 Richard Stallman <rms@psilocin.ai.mit.edu> | |
780 | |
781 * make-dist (MANIFEST): Include most subdirs, but exclude subdirs.el | |
782 and default.el. Sort the results. | |
783 | |
784 1998-05-31 Karl Heuer <kwzh@gnu.org> | |
785 | |
786 * Makefile.in (install-arch-indep): Don't die if site-lisp/ isn't | |
787 writable. | |
788 | |
789 1998-05-14 Richard Stallman <rms@psilocin.ai.mit.edu> | |
790 | |
791 * Makefile.in (install-arch-indep): | |
792 Don't alter site-lisp/subdirs.el if it exists. | |
793 | |
794 1998-05-12 Richard Stallman <rms@psilocin.ai.mit.edu> | |
795 | |
796 * Makefile.in (install-arch-indep): Put `-' on commands to create | |
797 subdirs.el in site-lisp dirs. | |
798 | |
799 1998-05-07 Richard Stallman <rms@psilocin.gnu.org> | |
800 | |
801 * Makefile.in (install-arch-indep): Fix typo in previous change. | |
802 | |
803 1998-05-06 Richard Stallman <rms@psilocin.gnu.org> | |
804 | |
805 * Makefile.in (install-arch-indep): Pass --dir-file to install-info. | |
806 | |
807 1998-04-28 Richard Stallman <rms@psilocin.gnu.org> | |
808 | |
809 * Makefile.in (mkdir): Create the site-lisp dirs. | |
810 (install-arch-indep): Make site-lisp/subdirs files world-readable. | |
811 | |
812 1998-04-26 Richard Stallman <rms@psilocin.gnu.org> | |
813 | |
814 * Makefile.in (INSTALL_INFO): New variable. | |
815 (install-arch-indep): Don't replace the dir file if it already exists. | |
816 Use the install-info program, via INSTALL_INFO, to add entries. | |
817 Make the `info' subdir and the Info files world-readable. | |
818 | |
819 1998-04-16 Eli Zaretskii <eliz@delysid.gnu.org> | |
820 | |
821 * config.bat: Make sure the environment is large enough to support | |
822 all the "set foo=bar" commands. Update pointers to DJGPP FTP | |
823 sites. | |
824 | |
825 1998-04-10 Karl Heuer <kwzh@gnu.org> | |
826 | |
827 * make-dist: Don't accept EMACS=t when testing for $EMACS set. | |
828 | |
829 1998-04-06 Jonathan I. Kamens <jik@kamens.brookline.ma.us> | |
830 | |
831 * configure.in: Add --with-gssapi to specify GSS-API | |
832 authentication support for movemail. | |
833 | |
834 1998-04-02 Richard Stallman <rms@psilocin.ai.mit.edu> | |
835 | |
836 * Makefile.in (install-arch-indep): Fix previous change. | |
837 | |
838 1998-03-30 Richard Stallman <rms@psilocin.ai.mit.edu> | |
839 | |
840 * Makefile.in (info): Run man in build dir, not srcdir. | |
841 | |
842 1998-03-28 Richard Stallman <rms@psilocin.ai.mit.edu> | |
843 | |
844 * Makefile.in (install-arch-indep): Fix previous change. | |
845 | |
846 1998-03-23 Kenichi Handa <handa@etl.go.jp> | |
847 | |
848 * Makefile.in (top_distclean): Check the existence of `lock' | |
849 subdir. | |
850 | |
851 1998-03-22 Richard Stallman <rms@gnu.org> | |
852 | |
853 * Makefile.in (install-arch-indep): Put special subdirs.el files | |
854 in site-lisp dirs. Use normal-top-level-add-subdirs-to-load-path. | |
855 | |
856 1998-03-21 Richard Stallman <rms@psilocin.gnu.org> | |
857 | |
858 * make-dist: Fix shell syntax in check for missing .el or .elc files. | |
859 | |
860 1998-03-09 Richard Stallman <rms@psilocin.gnu.org> | |
861 | |
862 * configure.in (hppa-hp-hpux1[0-9]*): Handle versions 1X like 10. | |
863 (m68*-hp-hpux*): Handle versions 1X like 10. | |
864 | |
865 1998-03-07 Richard Stallman <rms@psilocin.gnu.org> | |
866 | |
867 * make-dist: PROBLEMS is now in etc, not top level dir. | |
868 | |
869 * Makefile.in (SOURCES): Delete PROBLEMS. | |
870 | |
871 1998-02-25 Richard Stallman <rms@gnu.org> | |
872 | |
873 * configure.in (hppa*-hp-hpux*): Use hpux10 by default. | |
874 | |
875 * Makefile.in (install-arch-indep): Do chmod a+x on subdirs. | |
876 | |
877 1998-01-17 Richard Stallman <rms@gnu.org> | |
878 | |
879 * Makefile.in (install-arch-indep): Add semicolon before `else'. | |
880 | |
881 1998-01-02 Richard Stallman <rms@psilocin.gnu.org> | |
882 | |
883 * make-dist (tempparent): New option --no-check. | |
884 | |
885 * make-dist: Don't do anything with cpp directory. | |
886 | |
887 1997-12-20 Richard Stallman <rms@psilocin.gnu.org> | |
888 | |
889 * configure.in (sparc-fujitsu-sysv4*): New target. | |
890 | |
891 1997-12-17 Andreas Schwab <schwab@gnu.org> | |
892 | |
893 * configure.in: Cache more tests. Add missing quotes around | |
894 message with embedded comma. | |
895 | |
896 1997-12-04 Karl Heuer <kwzh@gnu.org> | |
897 | |
898 * Makefile.in (unlock, relock): Don't reference cpp/ directory. | |
899 | |
900 1997-11-26 Joel N. Weber II <devnull@gnu.org> | |
901 | |
902 * make-dist: Changed the comment about `umask 0' to say `Don't | |
903 restrict access to any files.'; previously it said `Don't protect | |
904 any files', which may have implied that we think fascism is good. | |
905 | |
906 1997-11-24 Paul Eggert <eggert@twinsun.com> | |
907 | |
908 * configure.in (AC_CHECK_FUNCS): Add strftime. The new GNU C library | |
909 strftime needs the underlying host's strftime for locale dependent | |
910 formats. | |
911 | |
912 1997-11-20 Abraham Nahum <miko@uxsrvc.tti.co.il> | |
913 | |
914 * configure.in (i586-dg-dguxR4.*): New name in case branch. | |
915 | |
916 1997-11-20 Eli Zaretskii <eliz@is.elta.co.il> | |
917 | |
918 * config.bat: Configure the man subdirectory. | |
919 | |
920 1997-11-07 Paul Eggert <eggert@twinsun.com> | |
921 | |
922 * configure.in (AC_CHECK_LIB): Add -lintl. | |
923 | |
924 1997-11-07 Karl Heuer <kwzh@gnu.org> | |
925 | |
926 * make-dist (check for .elc files): Avoid bash-specific syntax. | |
927 (check for overflow 14-char limit): Simplify. | |
928 | |
929 1997-11-07 Richard Stallman <rms@gnu.org> | |
930 | |
931 * Makefile.in (install): Move blessmail last. | |
932 | |
933 1997-10-02 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
934 | |
935 * configure.in (gettimeofday, one arg or two): | |
936 Clarify messages by avoiding double negative. | |
937 | |
938 1997-09-30 Karl Eichwalder <ke@suse.de> | |
939 | |
940 * Makefile.in (install-arch-indep): install the widget info file. | |
941 | |
942 1997-09-24 Jonathan I. Kamens <jik@kamens.brookline.ma.us> | |
943 | |
944 * configure.in (with-pop, with-kerberos): Need to check Kerberos | |
945 libraries in reverse order, so that libraries will appear in the | |
946 correct dependency order on the link line (and so that the | |
947 configure checks themselves will work properly when early | |
948 libraries depend on later ones). | |
949 | |
950 1997-09-21 Erik Naggum <erik@naggum.no> | |
951 | |
952 * make-dist (making links to `src'): Keep timestamp on copied | |
953 files. | |
954 | |
955 * make-delta: New script to produce delta distributions. | |
956 | |
957 1997-09-19 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
958 | |
959 * Version 20.2 released. | |
960 | |
961 1997-09-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
962 | |
963 * Version 20.1 released. | |
964 | |
965 * Makefile.in (install-leim): Depend on mkdir. | |
966 (leim): Depend on src. | |
967 | |
968 1997-09-13 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
969 | |
970 * configure.in: Recognize alpha* instead of just alpha. | |
971 | |
972 1997-09-12 Paul Eggert <eggert@twinsun.com> | |
973 | |
974 * leim-Makefile.in (mostlyclean, maintainer-clean): New targets. | |
975 | |
976 1997-09-12 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
977 | |
978 * update-subdirs: Use rm -f. | |
979 | |
980 1997-09-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
981 | |
982 * update-subdirs: Delete subdirs.el if this dir has no subdirs. | |
983 Ignore subdirs named Old. | |
984 | |
985 1997-08-04 Kenneth Stailey <kstailey@elbereth.disclosure.com> | |
986 | |
987 * configure.in: Add OpenBSD clause to set $machine. | |
988 | |
989 1997-09-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
990 | |
991 * make-dist: Recompile everything after updating various Lisp files. | |
992 Recompile in leim as well as lisp. | |
993 Check in leim as well as lisp for mismatched files and too-long names. | |
994 | |
995 1997-09-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
996 | |
997 * Makefile.in (TAGS tags): Simply refer this to the src subdir. | |
998 | |
999 1997-08-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1000 | |
1001 * Makefile.in (install-arch-indep): Verify ./lisp has simple.el in it | |
1002 before trying to copy anything from it. | |
1003 | |
1004 1997-08-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1005 | |
1006 * Makefile.in (man/Makefile): New target. | |
1007 (tags): Define env var EMACS and run Makefile from build dir. | |
1008 | |
1009 1997-08-27 Eli Zaretskii <eliz@psilocin.gnu.ai.mit.edu> | |
1010 | |
1011 * config.bat: If src/_gdbinit doesn't exist, try using | |
1012 src/.gdbinit to create it (for building on Windows 95). | |
1013 | |
1014 1997-08-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1015 | |
1016 * Makefile.in (install-arch-indep): | |
1017 Discard extra data in tar | tar pipes. | |
1018 | |
1019 1997-08-24 NIIBE Yutaka <gniibe@mri.co.jp> | |
1020 | |
1021 * configure.in (x_default_search_path): Corrected | |
1022 '${x_library}' to '${x_library}/X11'. | |
1023 | |
1024 1997-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1025 | |
1026 * configure.in (HAVE_MOTIF_2_1): Test for Motif 2.1, | |
1027 | |
1028 1997-08-22 Jonathan I. Kamens <jik@kamens.brookline.ma.us> | |
1029 | |
1030 * configure.in: Support auto-configuration of both Kerberos V4 and | |
1031 Kerberos V5 for movemail, including detection of V4 and V5 header | |
1032 files and libraries. | |
1033 | |
1034 1997-08-16 NIIBE Yutaka <gniibe@etl.go.jp> | |
1035 | |
1036 * configure.in: Compute x_default_search_path | |
1037 and substitute into makefiles. | |
1038 | |
1039 * Makefile.in (paths-force): Store PATH_X_DEFAULTS in paths.h. | |
1040 | |
1041 1997-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1042 | |
1043 * Makefile.in (install-arch-indep): Run list-load-path-shadows. | |
1044 | |
1045 1997-08-07 Erik Naggum <erik@naggum.no> | |
1046 | |
1047 * configure.in: Remove lockdir, it is no longer needed. | |
1048 * Makefile.in (mkdir): Don't create lockdir. | |
1049 (lockdir): Variable deleted. | |
1050 (paths-force): Don't operate on PATH_LOCK. | |
1051 | |
1052 1997-08-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1053 | |
1054 * leim-Makefile.in (clean, distclean): New targets. | |
1055 | |
1056 * make-dist: Include leim/ChangeLog in leim distribution. | |
1057 | |
1058 1997-08-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1059 | |
1060 * configure.in (i*86-*-sysv4.2uw*): Set NON_GNU_CPP. | |
1061 | |
1062 1997-07-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1063 | |
1064 * Makefile.in (CPPFLAGS): Get this from configure, like CFLAGS. | |
1065 | |
1066 1997-07-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1067 | |
1068 * Makefile.in (LDFLAGS): Get this from configure, like CFLAGS. | |
1069 | |
1070 1997-07-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1071 | |
1072 * make-dist: Update leim/leim-list.el. | |
1073 Pass along value of $EMACS when updating lisp dir. | |
1074 | |
1075 1997-07-25 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu> | |
1076 | |
1077 * configure.in (doug_lea_malloc): Make __after_morecore_hook a | |
1078 prerequisite to the use of Doug Lea's malloc. | |
1079 | |
1080 1997-07-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1081 | |
1082 * Makefile.in (top_distclean): Use -f to delete contents of lock dir. | |
1083 | |
1084 * make-dist: Use name leim/SKK-DIC, not leim/SKK. | |
1085 | |
1086 1997-07-16 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1087 | |
1088 * make-dist: Arrange for the leim tar file to unpack in emacs-M.N/leim. | |
1089 | |
1090 1997-07-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1091 | |
1092 * configure.in (mips-sony-newsos6*): File news-risc.h renamed | |
1093 to news-r6.h. | |
1094 | |
1095 1997-07-10 Eli Zaretskii <eliz@is.elta.co.il> | |
1096 | |
1097 * config.bat: Use `sed' instead of `cp', which might not be | |
1098 installed. | |
1099 | |
1100 1997-07-09 Kenichi Handa <handa@etl.go.jp> | |
1101 | |
1102 * Makefile.in (mostlyclean): Add cleaning leim directory. | |
1103 (clean, distclean, maintainer-clean): Likewise. | |
1104 | |
1105 1997-07-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1106 | |
1107 * make-dist (bogosities): Check subdirs of `lisp' also. | |
1108 | |
1109 1997-07-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1110 | |
1111 * make-dist (etc): Really avoid symlinks now. | |
1112 (lisp): Don't delete from subdirs the things we never copy. | |
1113 | |
1114 1997-07-07 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu> | |
1115 | |
1116 * Makefile.in (install-arch-indep): Correct the target name. | |
1117 The first letter `i' was dropped by the previous change of mine. | |
1118 | |
1119 1997-07-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1120 | |
1121 * configure.in (leim/Makefile): Generate this. | |
1122 (*-sysv4.2uw*): Recognize new alternative. | |
1123 | |
1124 * leim-Makefile.in: Renamed from leim-Makefile. | |
1125 | |
1126 * make-dist: Set up real-leim subdirectory, | |
1127 with the real contents of leim; then move it to | |
1128 a separate top-level directory. | |
1129 | |
1130 * make-dist: Don't mention site-lisp, site-init, site-start | |
1131 or default, when listing files hat are not compiled and should be. | |
1132 | |
1133 * configure.in: Create src/config.stamp at the end. | |
1134 | |
1135 1997-07-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1136 | |
1137 * Makefile.in (install-leim): Correct previous change. | |
1138 | |
1139 1997-07-02 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu> | |
1140 | |
1141 * Makefile.in (install-leim): New target. | |
1142 (install): Depend on install-leim. | |
1143 | |
1144 1997-07-01 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu> | |
1145 | |
1146 * Makefile.in (SUBDIR): Add leim. | |
1147 (SUBDIR_MAKEFILES): Add leim/Makefile. | |
1148 (leim/Makefile): New target. | |
1149 | |
1150 1997-07-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1151 | |
1152 * leim-Makefile: New file. | |
1153 * make-dist: Initialize a `leim' subdirectory with that makefile. | |
1154 | |
1155 1997-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1156 | |
1157 * configure.in (GNU_MALLOC_reason): Fix message text. | |
1158 | |
1159 1997-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1160 | |
1161 * make-dist (lisp): Don't process subdirs that start with =. | |
1162 (etc): Copy symlinks, as in src. | |
1163 | |
1164 1997-06-26 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1165 | |
1166 * configure.in (i*86-*-unixware*): New alternative. | |
1167 | |
1168 1997-06-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1169 | |
1170 * Makefile.in (src/config.stamp): Target renamed from src/config.h | |
1171 and touch it explicitly. | |
1172 | |
1173 * configure.in (mips-sony-newsos6*): New alternative. | |
1174 (mips-*-linux-gnu*): New alternative. | |
1175 (*-*-bsdi*): New alternative. | |
1176 (i*86-*-bsd386, i*86-*-bsdi...): Delete old alternatives. | |
1177 | |
1178 1997-06-22 Dave Love <d.love@dl.ac.uk> | |
1179 | |
1180 * Makefile.in (lib-src): Depend on src/config.h (e.g. for | |
1181 movemail.o). | |
1182 (src/config.h): New target to re-configure if src/config.in | |
1183 is patched. | |
1184 | |
1185 1997-06-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1186 | |
1187 * configure.in (shutdown): Check for `shutdown' function. | |
1188 | |
1189 1997-06-18 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu> | |
1190 | |
1191 * update-subdirs: Include the directory "language" in subdirs. | |
1192 | |
1193 1997-06-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1194 | |
1195 * configure.in (m88k-dg-dgux4*): New alternative. | |
1196 (alpha-*-netbsd*): New alternative. | |
1197 (powerpcle-*-solaris2*): New alternative. | |
1198 | |
1199 1997-05-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1200 | |
1201 * make-dist: Warn about .el files that are not compiled. | |
1202 | |
1203 1997-05-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1204 | |
1205 * Makefile.in (dist): Don't run update-subdirs here, | |
1206 since make-dist now gets that done. | |
1207 | |
1208 * make-dist: Use the new `updates' target in lisp/Makefile. | |
1209 | |
1210 * make-dist: Use new non-file targets in lisp/Makefile. | |
1211 | |
1212 1997-04-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1213 | |
1214 * make-dist: Handle all subdirs of `lisp' uniformly. | |
1215 Don't handle `term' and `language' specially. | |
1216 Clear out umask at the beginning. | |
1217 | |
1218 1997-04-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1219 | |
1220 * make-dist: Use Make to update finder-inf.el and autoloads. | |
1221 Also update cus-load.el. | |
1222 | |
1223 1997-04-09 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu> | |
1224 | |
1225 * configure.in (doug_lea_malloc): First check for SYSTEM_MALLOC, | |
1226 in case it is desirable to disable the GNU malloc features with | |
1227 glibc. | |
1228 | |
1229 1997-04-08 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu> | |
1230 | |
1231 * configure.in (DOUG_LEA_MALLOC): | |
1232 Define if malloc_{get,set}_state exist. | |
1233 | |
1234 1997-03-05 Ken'ichi Handa <handa@etl.go.jp> | |
1235 | |
1236 * make-dist: Make links for files under lisp/language. | |
1237 | |
1238 1997-02-20 Kenichi Handa <handa@etl.go.jp> | |
1239 | |
1240 * update-subdirs: Exclude the directory "language" from subdirs. | |
1241 | |
1242 1997-01-26 Karl Heuer <kwzh@gnu.ai.mit.edu> | |
1243 | |
1244 * configure.in: Check for rint and cbrt. | |
1245 | |
1246 1997-01-01 Richard Stallman <rms@ethanol.gnu.ai.mit.edu> | |
1247 | |
1248 * make-dist: Use $EMACS to say where to run Emacs. | |
1249 Add --no-update option. | |
1250 | |
1251 1996-12-30 Richard Stallman <rms@ethanol.gnu.ai.mit.edu> | |
1252 | |
1253 * configure.in (hppa1.1-hitachi-hiuxmpp): New configuration. | |
1254 | |
1255 1996-12-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu> | |
1256 | |
1257 * make-dist (copying src): Check thoroughly for symlinks | |
1258 and copy them in all cases. Regularize the linking of *.in | |
1259 and *.opt and ChangeLog files. | |
1260 (copying lib-src): Likewise. | |
1261 Don't rm getdate.c or y.tab.*--they don't exist any more. | |
1262 | |
1263 1996-12-18 Jonathan I. Kamens <jik@annex-1-slip-jik.cam.ov.com> | |
1264 | |
1265 * configure.in: Check for libmail, maillock.h and | |
1266 touchlock (for movemail). | |
1267 | |
1268 1996-12-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1269 | |
1270 * configure.in (limits.h): Check for this file. | |
1271 | |
1272 1996-12-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1273 | |
1274 * configure.in (rs6000-ibm-aix4.2): New alternative. | |
1275 (rs6000-ibm-aix4.0): New alternative. | |
1276 (rs6000-ibm-aix4*): Assume aix 4.1 by default. | |
1277 | |
1278 1996-11-22 Ben Harris <bjh21@cam.ac.uk> | |
1279 | |
1280 * configure.in: Recognize vax-*-netbsd*. | |
1281 | |
1282 1996-11-06 Richard Stallman <rms@ethanol.gnu.ai.mit.edu> | |
1283 | |
1284 * configure.in (locallisppath): Add leim directory. | |
1285 | |
1286 1996-10-31 Eli Zaretskii <eliz@is.elta.co.il> | |
1287 | |
1288 * config.bat: Make sure `mv' supports forward slashes and -f. | |
1289 | |
1290 1996-10-28 Christian Limpach <chris@nice.ch> | |
1291 | |
1292 * configure.in (hppa*-next-nextstep*): * added after hppa | |
1293 to accept hppa1.0 and hppa1.1. | |
1294 | |
1295 1996-10-05 Marcus G. Daniels <marcus@coulee.tdb.com> | |
1296 | |
1297 * configure.in: Provide an empty default for LD_SWITCH_X_SITE_AUX. | |
1298 * configure.in (ld_switch_machine): Fix typo. | |
1299 | |
1300 1996-09-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu> | |
1301 | |
1302 * configure.in: Fetch LD_SWITCH_SYSTEM and LD_SWITCH_MACHINE | |
1303 from config.h and use them in $ac_link. | |
1304 | |
1305 1996-09-28 Erik Naggum <erik@psilocin.gnu.ai.mit.edu> | |
1306 | |
1307 * configure.in: Create a subdir named `lisp'. | |
1308 | |
1309 1996-09-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu> | |
1310 | |
1311 * configure.in: Check for getcwd. | |
1312 | |
1313 1996-09-04 Richard Stallman <rms@ethanol.gnu.ai.mit.edu> | |
1314 | |
1315 * configure.in: Check for termios.h. Check for setpgid. | |
1316 | |
1317 1996-08-31 Richard Stallman <rms@ethanol.gnu.ai.mit.edu> | |
1318 | |
1319 * configure.in: Check for setrlimit. | |
1320 | |
1321 1996-08-31 Paul Eggert <eggert@twinsun.com> | |
1322 | |
1323 * configure.in: Check for sys/systeminfo.h, getdomainname, sysinfo. | |
1324 | |
1325 1996-08-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1326 | |
1327 * configure.in: Check for utimes. | |
1328 | |
1329 * configure.in: Check for com_err library, but only | |
1330 if --with-kerberos was used. Check for krb and des | |
1331 only if --with-kerberos. | |
1332 | |
1333 1996-08-26 Richard Stallman <rms@ethanol.gnu.ai.mit.edu> | |
1334 | |
1335 * Makefile.in (INSTALL_STRIP): New variable. | |
1336 (install-strip): Set INSTALL_STRIP, not INSTALL_PROGRAM. | |
1337 (install-arch-dep): Use INSTALL_STRIP, and pass it to lib-src. | |
1338 | |
1339 1996-08-25 Richard Stallman <rms@ethanol.gnu.ai.mit.edu> | |
1340 | |
1341 * configure.in: Check for krb and des libraries. | |
1342 | |
1343 1996-08-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu> | |
1344 | |
1345 * configure.in (*-sunos4.1.[3-9]*noshare): | |
1346 Use sunos413, not sunos4-1-3. | |
1347 (m88k-dg-dgux5.4R3*): Use dgux5-4-3, not dgux5-4r3. | |
1348 (arm-acorn-riscix1.2*): Use riscix12, not riscix1-2. | |
1349 | |
1350 1996-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1351 | |
1352 * Makefile.in (src/paths.h): Target deleted. | |
1353 (paths-force): Delete all dependencies on this target | |
1354 but don't delete the target. | |
1355 (install): Depend on `all'. | |
1356 (paths-force): Don't print a message. | |
1357 | |
1358 * configure.in: Generate src/paths.h here. | |
1359 | |
1360 1996-08-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1361 | |
1362 * configure.in (NON_GCC_LINK_TEST_OPTIONS, GCC_LINK_TEST_OPTIONS): | |
1363 New variables that affect linking only. | |
1364 (alpha-dec-osf*): Use those instead of previous change. | |
1365 | |
1366 1996-08-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1367 | |
1368 * Makefile.in (install-arch-indep): Install info/messages. | |
1369 | |
1370 1996-08-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1371 | |
1372 * Version 19.33 released. | |
1373 | |
1374 1996-08-10 Marcus Daniels <marcus@sayre.sysc.pdx.edu> | |
1375 | |
1376 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*): | |
1377 Fix previous change. | |
1378 | |
1379 1996-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1380 | |
1381 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*): | |
1382 New alternative. | |
1383 | |
1384 1996-08-07 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1385 | |
1386 * configure.in (alpha-dec-osf*): Specify GCC_TEST_OPTIONS | |
1387 and NON_GCC_TEST_OPTIONS. | |
1388 | |
1389 1996-08-06 Paul Eggert <eggert@twinsun.com> | |
1390 | |
1391 * configure.in (LOCALTIME_CACHE): Don't put a string literal | |
1392 "TZ=..." in environ. | |
1393 | |
1394 1996-08-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1395 | |
1396 * make-dist (msdos): Add is_exec.c, sigaction.c to distribution. | |
1397 | |
1398 1996-08-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1399 | |
1400 * configure.in (*-sunos4.1.[3-9]*noshare): Move this before | |
1401 the more general *-sunos4.1.[3-9]* clause. | |
1402 | |
1403 1996-07-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1404 | |
1405 * Version 19.32 released. | |
1406 | |
1407 * configure.in (*-sco3.2v5*): | |
1408 Set OVERRIDE_CPPFLAG to a string of one space. | |
1409 Fix the code that uses OVERRIDE_CPPFLAG. | |
1410 | |
1411 1996-07-16 Karl Heuer <kwzh@gnu.ai.mit.edu> | |
1412 | |
1413 * configure.in: Undo previous change. | |
1414 | |
1415 1996-07-16 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu> | |
1416 | |
1417 * config.sub: Use `pc', not `unknown', when canonicalizing | |
1418 the vendor for ...86. | |
1419 | |
1420 1996-07-15 David Mosberger-Tang <davidm@AZStarNet.com> | |
1421 | |
1422 * configure.in: Check for termios.h header. | |
1423 | |
1424 1996-07-11 Bill Mann <dvmann@dvncr.praxisint.com> | |
1425 | |
1426 * configure.in: Use s/usg5-4-3.h for ncr-i[3456]86-sysv4.3 | |
1427 | |
1428 1996-07-07 Karl Heuer <kwzh@gnu.ai.mit.edu> | |
1429 | |
1430 * configure.in: Split bsdos2 and bsdos2-1. | |
1431 | |
1432 1996-07-06 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu> | |
1433 | |
1434 * config.sub: If last two words are not a recognized | |
1435 KERNEL-OS pair, use just the last word as OS, as in 19.31. | |
1436 Make conversion of gnu/linux to linux-gnu really work. | |
1437 | |
1438 * config.sub: If vendor unspecified with i386, use `pc' not `unknown'. | |
1439 | |
1440 1996-06-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1441 | |
1442 * configure.in (check for using Lucid widgets by default): | |
1443 Eliminate indentation that confuses some compilers. | |
1444 | |
1445 1996-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1446 | |
1447 * config.sub: Convert linux and gnu/linux to linux-gnu. | |
1448 | |
1449 * make-dist: Don't update getdate.c. | |
1450 Ignore =... files when checking for too-long Lisp file names. | |
1451 | |
1452 1996-06-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1453 | |
1454 * configure.in (euidaccess): Check for that, not for eaccess. | |
1455 | |
1456 1996-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1457 | |
1458 * configure.in (sunos4.1.[3-9]*noshare): Eliminate dash from | |
1459 before `noshare'. | |
1460 (mips-sgi-irix6*): Specify NON_GCC_TEST_OPTIONS. | |
1461 | |
1462 1996-06-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1463 | |
1464 * configure.in: Rename lignux to linux-gnu in configuration names. | |
1465 Use gnu-linux as the opsys value (s/ file name). | |
1466 Allow i686 just like i386, i486, i586. | |
1467 | |
1468 1996-06-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1469 | |
1470 * configure.in (i*86-*-sco3.2v5): New alternative. | |
1471 (OVERRIDE_CPPFLAG): New variable. | |
1472 (CPPFLAGS): If OVERRIDE_CPPFLAG is set, use that. | |
1473 | |
1474 * configure.in: Specify vpath for .texi files. | |
1475 | |
1476 1996-06-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1477 | |
1478 * configure.in: Always check for HAVE_X11R5. | |
1479 Separately decide whether to use a toolkit by default. | |
1480 | |
1481 1996-06-04 Bill Mann <dvmann@dvhpux1.praxisint.com> | |
1482 | |
1483 * configure.in: If X11R5 is missing the Xaw headers, | |
1484 default to --with-x-toolkit=no. | |
1485 | |
1486 1996-05-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1487 | |
1488 * configure.in (powerpc-*-solaris2*): Use ibmrs6000, not rs6000. | |
1489 | |
1490 1996-05-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu> | |
1491 | |
1492 * Makefile.in (install-arch-indep): If cd etc makes output, | |
1493 don't treat that as part of the tar data. | |
1494 Check that ./lisp actually exists. | |
1495 | |
1496 1996-05-29 Karl Heuer <kwzh@gnu.ai.mit.edu> | |
1497 | |
1498 * make-dist: Check for long file names. | |
1499 | |
1500 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu> | |
1501 | |
1502 * Version 19.31 released. | |
1503 | |
1504 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu> | |
1505 | |
1506 * configure.in: Recognize sparc-*-lignux. | |
1507 | |
1508 1996-05-03 Richard Stallman <rms@delasyd.gnu.ai.mit.edu> | |
1509 | |
1510 * make-dist: Include nt/inc/arpa and nt/inc/netinet in the dist. | |
1511 Don't include config.w95. | |
1512 | |
1513 1996-04-21 Richard Stallman <rms@delasyd.gnu.ai.mit.edu> | |
1514 | |
1515 * make-dist: Replace --no-clean-up and --no-tar options | |
1516 with --clean-up and --tar, so that the default is useful. | |
1517 | |
1518 1996-04-15 Eli Zaretskii <eliz@is.elta.co.il> | |
1519 | |
1520 * config.bat: Make sure the GDB init file is called src/_gdbinit; | |
1521 if not, tell the user to rename it and abort. | |
1522 | |
1523 1996-04-14 Eli Zaretskii <eliz@is.elta.co.il> | |
1524 | |
1525 * config.bat: With DJGPP v1.x, use `COFF2EXE' to produce JUNK.EXE | |
1526 test program. | |
1527 | |
1528 1996-04-12 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1529 | |
1530 * config.bat (djgpp_ver): Variable renamed from djgpp-ver. | |
1531 | |
1532 * make-dist (MANIFEST): Fix previous change. | |
1533 (msdos): Put mainmake.v2 into the dist. | |
1534 | |
1535 1996-04-10 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu> | |
1536 | |
1537 * make-dist: Exit if autoconf fails. | |
1538 | |
1539 1996-04-10 Eli Zaretskii <eliz@is.elta.co.il> | |
1540 | |
1541 * config.bat: Set djgpp-ver, and unset it at the end. | |
1542 Add a number ofconditionals for DJGPP version 2. | |
1543 Rename label libsrc2 to libsrc3. | |
1544 Substitute for LDFLAGS in src/Makefile. | |
1545 Substitute for ALL_CFLAGS in lib-src/Makefile. | |
1546 | |
1547 1996-04-08 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1548 | |
1549 * configure.in (ncurses): Check this after checking fns like strerror. | |
1550 | |
1551 1996-04-08 Erik Naggum <erik@naggum.no> | |
1552 | |
1553 * make-dist (MANIFEST): Don't include lines from =files. | |
1554 | |
1555 1996-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1556 | |
1557 * make-dist: Don't put lisp/dired.todo in the dist. | |
1558 | |
1559 1996-04-05 Richard Stallman <rms@lucy.gnu.ai.mit.edu> | |
1560 | |
1561 * configure.in (HAVE_NCURSES): Look for library named ncurses. | |
1562 | |
1563 * configure.in (setlocale): Check for it. | |
1564 | |
1565 * configure.in (*-*-sysv4.2*): If no /usr/ccs/lib/cpp, use /lib/cpp. | |
1566 | |
1567 1996-03-26 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1568 | |
1569 * configure.in: Use lignux instead of linux as value of opsys. | |
1570 | |
1571 1996-03-22 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1572 | |
1573 * Makefile.in (install-strip): Fix whitespace. | |
1574 Get rid of continuation. | |
1575 | |
1576 * config.sub: Convert linux or gnu/linux to lignux. | |
1577 | |
1578 1996-03-21 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1579 | |
1580 * configure.in: Accept lignux in configuration name. | |
1581 | |
1582 1996-03-20 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1583 | |
1584 * Makefile.in (install-strip): New target. | |
1585 | |
1586 1996-03-18 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1587 | |
1588 * Makefile.in (top_distclean): Use `|| true' to ignore error in rm. | |
1589 -f failed to do the job on Suns. | |
1590 | |
1591 1996-03-13 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu> | |
1592 | |
1593 * Makefile.in (install-arch-dep): Don't depend on install-arch-indep. | |
1594 | |
1595 * configure.in (linux/version.h): Check for this header. | |
1596 | |
1597 1996-03-12 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu> | |
1598 | |
1599 * configure.in: Remove -fno-builtin hackery from -lm check. | |
1600 | |
1601 1996-03-08 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu> | |
1602 | |
1603 * configure.in (-lm check): If $GCC, append -fno-builtin to $CC for | |
1604 just this test. | |
1605 | |
1606 * configure.in (AC_PREREQ): Require version 2.8 of Autoconf. | |
1607 | |
1608 1996-03-04 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1609 | |
1610 * configure.in: Check for ncurses. | |
1611 | |
1612 1996-02-28 Paul Eggert <eggert@twinsun.com> | |
1613 | |
1614 * configure.in (LOCALTIME_CACHE): | |
1615 Also define if localtime mishandles unsetting TZ. | |
1616 This works around a localtime bug in mips-dec-ultrix. | |
1617 | |
1618 1996-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1619 | |
1620 * make-dist (finder-inf.el): Use finder-compile-keywords-make-dist. | |
1621 | |
1622 * configure.in: Improve messages about X versions. | |
1623 | |
1624 1996-02-24 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1625 | |
1626 * configure.in (LOCALTIME_CACHE): Cope if $ac_cv_func_tzset is null. | |
1627 | |
1628 1996-02-23 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1629 | |
1630 * configure.in (HAVE_X11XTR6): Set it as a shell variable. | |
1631 (HAVE_LIBXMU): If HAVE_X11XTR6, use -lSM and -lICE. | |
1632 | |
1633 * Makefile.in (install-arch-dep): Depend on install-arch-indep. | |
1634 (install): Put install-arch-indep before install-arch-dep. | |
1635 | |
1636 1996-02-20 Dave Love <d.love@dl.ac.uk> | |
1637 | |
1638 * INSTALL: Clarify info about MS-DOS path handling. | |
1639 | |
1640 1996-02-12 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1641 | |
1642 * Makefile.in (install-arch-indep): Install info/ccmode*. | |
1643 In previous change, protect against /bin/pwd returning null string. | |
1644 | |
1645 1996-02-07 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1646 | |
1647 * Makefile.in (install-arch-indep): Copy build-dir's lisp subdir | |
1648 to lispdir. | |
1649 | |
1650 1996-02-01 Paul Eggert <eggert@twinsun.com> | |
1651 | |
1652 * configure.in (LD_RUN_PATH): Prepend x_libraries to this envvar. | |
1653 | |
1654 1996-01-30 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1655 | |
1656 * configure.in (HAVE_TIMEVAL): Set explicitly to `no' if test fails. | |
1657 | |
1658 1996-01-25 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1659 | |
1660 * Makefile.in (extraclean): Use ${top_distclean} to ensure | |
1661 we delete everything distclean deletes. | |
1662 | |
1663 1996-01-23 Karl Heuer <kwzh@gnu.ai.mit.edu> | |
1664 | |
1665 * make-dist (lwlib): Don't distribute lwlib-Xol* files. | |
1666 | |
1667 1996-01-17 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1668 | |
1669 * configure.in (HAVE_X11): Merge $LD_SWITCH_X_SITE | |
1670 into LDFLAGS instead of into LIBS. | |
1671 | |
1672 1996-01-16 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1673 | |
1674 * configure.in (HAVE_XMU): Fix typo in previous change. | |
1675 | |
1676 1996-01-15 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1677 | |
1678 * configure.in [Solaris]: Don't let $CC make us use /usr/ucb/cc. | |
1679 | |
1680 1996-01-10 Erik Naggum <erik@naggum.no> | |
1681 | |
1682 * configure.in (USE_X_TOOLKIT = maybe): Delete redundant `fi'. | |
1683 | |
1684 1996-01-10 Karl Heuer <kwzh@gnu.ai.mit.edu> | |
1685 | |
1686 * Makefile.in (install-arch-indep): Ignore error if no chmod -R. | |
1687 | |
1688 1996-01-10 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu> | |
1689 | |
1690 * configure.in (HAVE_XMU): Check for libXmu.a only if using toolkit | |
1691 and use -lXt to link it. | |
1692 | |
1693 1996-01-08 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu> | |
1694 | |
1695 * configure.in (locallisppath): Put version-specific dir first. | |
1696 | |
1697 1996-01-07 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu> | |
1698 | |
1699 * configure.in (hppa-*-nextstep*): New alternative. | |
1700 (USE_X_TOOLKIT): By default, set this to "maybe"; | |
1701 and change that later to LUCID or "no" according to X11 version. | |
1702 | |
1703 * make-dist: Recompile outdated .elc files and update all autoloads. | |
1704 | |
1705 1996-01-05 Roland McGrath <roland@churchy.gnu.ai.mit.edu> | |
1706 | |
1707 * configure.in (locallisppath): Fix typo in last change: " -> '. | |
1708 | |
1709 1996-01-04 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1710 | |
1711 * configure.in (locallisppath): Add ../emacs/VERSION/site-lisp. | |
1712 | |
1713 1995-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1714 | |
1715 * Makefile.in (install-arch-indep): Give all files read permission. | |
1716 | |
1717 1995-12-26 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1718 | |
1719 * configure.in (hppa*-hp-hpux9shr*, hppa*-hp-hpux9*, hppa*-hp-hpux*): | |
1720 If it is hpux 9, check for /usr/include/X11R5 and /usr/lib/x11R5. | |
1721 | |
1722 1995-12-24 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1723 | |
1724 * configure.in: Determine HAVE_X11R6. | |
1725 (HAVE_MENUS): Renamed from HAVE_X_MENU. | |
1726 | |
1727 1995-12-21 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu> | |
1728 | |
1729 * configure.in: Just "solaris" now defaults to version 2.4. | |
1730 Add sunos4.1.n-noshare as alternative. | |
1731 | |
1732 1995-12-01 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1733 | |
1734 * configure.in (mips-sgi-irix6*): Set NON_GNU_CPP. | |
1735 | |
1736 1995-11-29 Erik Naggum <erik@naggum.no> | |
1737 | |
1738 * Makefile.in (install-arch-indep): Add missing backslash. | |
1739 | |
1740 1995-11-29 Karl Eichwalder <ke@ke.Central.DE> | |
1741 | |
1742 * Makefile.in (install-arch-indep): Don't install | |
1743 lispdir/[Mm]akefile*, lispdir/ChangeLog, lispdir/dired.todo. | |
1744 | |
1745 1995-11-29 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1746 | |
1747 * Makefile.in (install-arch-indep): Fix previous change. | |
1748 | |
1749 * configure.in (mips-sni-sysv*): New alias for mips-siemens-sysv*. | |
1750 | |
1751 1995-11-24 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1752 | |
1753 * Version 19.30 released. | |
1754 | |
1755 * make-dist (lisp): Exclude subdirs.el. | |
1756 | |
1757 1995-11-22 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1758 | |
1759 * make-dist (etc): Delete *.orig and *.rej. | |
1760 | |
1761 1995-11-16 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1762 | |
1763 * Makefile.in (install-arch-indep): Rename old info/dir only if exists. | |
1764 | |
1765 1995-11-15 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1766 | |
1767 * configure.in (hppa*-hp-hpux10*): Use s/hpux10.h. | |
1768 | |
1769 1995-11-14 Geoff Voelker <voelker@cs.washington.edu> | |
1770 | |
1771 * make-dist (nt): Rename install, readme, and todo to | |
1772 INSTALL, README, and TODO. | |
1773 | |
1774 1995-11-10 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1775 | |
1776 * make-dist (lisp): Don't distribute site-start. | |
1777 | |
1778 1995-11-06 Karl Heuer <kwzh@gnu.ai.mit.edu> | |
1779 | |
1780 * make-dist: Break the hard link on alloca.c. | |
1781 | |
1782 1995-11-04 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu> | |
1783 | |
1784 * configure.in (LIBS): Add libsrc_libs and keep the old LIBS. | |
1785 | |
1786 1995-11-02 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu> | |
1787 | |
1788 * make-dist (src, lib-src): Don't distribute Makefile.c. | |
1789 (etc/e): Do cleanup in $tempdir/etc/e, not $tempdir/etc. | |
1790 | |
1791 1995-10-31 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1792 | |
1793 * Makefile.in (mkdir): Create man1dir, not mandir. | |
1794 (uninstall): Use man1dir, not mandir. | |
1795 | |
1796 1995-10-30 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1797 | |
1798 * Makefile.in (man1dir): New variable. | |
1799 (install-arch-indep): Use man1dir. | |
1800 | |
1801 * configure.in (sparc-*-nextstep*): Remove incorrect .h's. | |
1802 | |
1803 * make-dist: Create lisp/MANIFEST. | |
1804 | |
1805 1995-10-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> | |
1806 | |
1807 * configure.in (m68k-*-linux*): New alternative. | |
1808 | |
1809 1995-10-27 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1810 | |
1811 * make-dist: Use new names config.in, paths.in, and | |
1812 {src,lib-src}/Makefile.in. | |
1813 | |
1814 1995-10-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu> | |
1815 | |
1816 * configure.in: Don't bother checking for drem. | |
1817 | |
1818 1995-10-20 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1819 | |
1820 * Makefile.in (distclean): Delete line with just a tab in it. | |
1821 (install-arch-indep): Delete spaces that precede tabs. | |
1822 Delete spurious `fi' left from previous change. | |
1823 (install): Supply `true' as command, to avoid null command. | |
1824 | |
1825 1995-10-05 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1826 | |
1827 * configure.in (--with-x-toolkit)): Add `athen' as alias for `athena'. | |
1828 | |
1829 1995-09-30 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1830 | |
1831 * configure.in (powerpc-*-solaris2): New alternative.x | |
1832 | |
1833 1995-09-12 Karl Heuer <kwzh@gnu.ai.mit.edu> | |
1834 | |
1835 * Makefile.in (src/paths.h, paths-force): Use paths.h.$$ instead | |
1836 of paths.h.tmp$$, to avoid going beyond 14 characters. | |
1837 | |
1838 1995-09-10 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1839 | |
1840 * configure.in: Improve error msg for invalid --with-x-toolkit value. | |
1841 | |
1842 1995-09-06 Paul Eggert <eggert@twinsun.com> | |
1843 | |
1844 * configure.in (LOCALTIME_CACHE): Define if tzset exists and | |
1845 if localtime caches TZ. Check for tzset. | |
1846 | |
1847 1995-09-01 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1848 | |
1849 * config.bat: Simplify using new names file names src/makefile.in, | |
1850 config.in, paths.in. Change Echo commands not to use `. | |
1851 | |
1852 1995-08-31 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1853 | |
1854 * Makefile.in (install-arch-indep): Always install the new dir file; | |
1855 rename the previous dir file to dir.bak or dir.old. | |
1856 | |
1857 1995-08-14 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1858 | |
1859 * configure.in (RANLIB): Substitute this into makefiles. | |
1860 Set it specially on solaris; set it by default on other systems. | |
1861 | |
1862 * configure.in: Fix previous Alpha change. | |
1863 | |
1864 1995-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1865 | |
1866 * configure.in (i*386-*-isc4.*): Set GCC_TEST_OPTIONS and | |
1867 NON_GCC_TEST_OPTIONS. | |
1868 | |
1869 1995-08-10 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1870 | |
1871 * configure.in (CFLAGS): When computing CFLAGS and REAL_CFLAGS | |
1872 from config.h, use SPECIFIED_CFLAGS to get what the user specified. | |
1873 | |
1874 * configure.in (alpha-*-linux*): New configuration. | |
1875 | |
1876 1995-08-05 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1877 | |
1878 * configure.in (m68*-next-*): Use m68k.h and nextstep.h. | |
1879 (m68k-next-nextstep*): New alias for that. | |
1880 (i*86-*-nextstep*): Use nextstep.h. | |
1881 (sparc-*-nextstep*): New configuration. | |
1882 | |
1883 1995-08-02 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1884 | |
1885 * configure.in (CPP): Save original CFLAGS value in SPECIFIED_CFLAGS. | |
1886 And get CFLAGS from config.h if SPECIFIED_CFLAGS is null. | |
1887 | |
1888 1995-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1889 | |
1890 * configure.in: Handle sunos4shr by sharing; not like sunos4*. | |
1891 Determine GETTIMEOFDAY_ONE_ARGUMENT by experiment. | |
1892 | |
1893 1995-07-18 Mike Long <mike.long@analog.com> | |
1894 | |
1895 * make-dist: Fix update of finder-inf.el, and byte-compile it. | |
1896 | |
1897 1995-07-18 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1898 | |
1899 * Makefile.in (src/paths.h, paths-force): | |
1900 Rename src/paths.h.in to src/paths.in. | |
1901 (Makefile): Depend on src/Makefile.in, not src/Makefile.in.in. | |
1902 | |
1903 * configure.in: Rename {src,lib-src}/Makefile.in.in to Makefile.in. | |
1904 Use Makefile.c for intermediate file. | |
1905 Rename src/config.h.in to src/config.in. | |
1906 | |
1907 1995-07-17 Richard Stallman <rms@gnu.ai.mit.edu> | |
1908 | |
1909 * configure.in (mips-dec-ultrix*): Assume version 4.3. | |
1910 (mips-dec-ultrix4.[12]): New alternative for old versions. | |
1911 | |
1912 1995-07-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu> | |
1913 | |
1914 * make-dist: Don't break intra-tree links. | |
1915 | |
1916 1995-07-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu> | |
1917 | |
1918 * configure.in: Put back archlibdir initialization. Require | |
1919 autoconf 2.4.1 or later. | |
1920 | |
1921 1995-07-01 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1922 | |
1923 * configure.in: Use sunos4shr normally for Sunos 4.1.[3-9]. | |
1924 (mips-mips-riscos5*): New alternative. | |
1925 | |
1926 1995-06-29 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1927 | |
1928 * Makefile.in (uninstall, install-arch-indep): Install info/ediff*. | |
1929 | |
1930 1995-06-27 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1931 | |
1932 * configure.in (bindir, datadir, sharedstatedir, libexecdir) | |
1933 (mandir, infodir, archlibdir): Initializations deleted. | |
1934 | |
1935 * configure.in: On hpux9, use hpux9-x11r4.h if we have X11R4. | |
1936 On hpux9shr, use hpux9shxr4.h. | |
1937 | |
1938 1995-06-24 Morten Welinder <terra+@cs.cmu.edu> | |
1939 | |
1940 * configure.in: Added target mips-dec-mach_bsd4.3. | |
1941 * config.guess: Guess mips-dec-mach_bsd4.3. | |
1942 | |
1943 1995-06-24 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1944 | |
1945 * Makefile.in (mkdir): Use symbolic chmod. | |
1946 | |
1947 1995-06-22 Paul Eggert <eggert@twinsun.com> | |
1948 | |
1949 * configure.in: Treat SunOS 4.1.4 like SunOS 4.1.3. | |
1950 (Likewise for SunOS 4.1.5 thorugh 4.1.9, should they ever exist.) | |
1951 | |
1952 1995-06-22 Paul Eggert <eggert@twinsun.com> | |
1953 | |
1954 * Makefile.in (SUBDIR_MAKEFILES): | |
1955 Add man/Makefile, so `make distclean' removes it. | |
1956 (top_distclean): Add config.log to the list of files to be removed. | |
1957 | |
1958 1995-06-19 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1959 | |
1960 * Version 19.29 released. | |
1961 | |
1962 1995-06-17 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1963 | |
1964 * configure.in: Fix the previous change to verify that the -b | |
1965 option really solves the problem. | |
1966 | |
1967 * make-dist (nt): Explicitly include makefile.nt and makefile.def only. | |
1968 | |
1969 1995-06-16 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1970 | |
1971 * configure.in: Test whether XFree86 needs -b i486-linuxaout to link. | |
1972 | |
1973 1995-06-15 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
1974 | |
1975 * configure.in: Report more clearly when there is no special | |
1976 dir to search for X includes or libraries. | |
1977 | |
1978 1995-06-13 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu> | |
1979 | |
1980 * configure.in: Check for -lpthreads, not -lpthread. | |
1981 | |
1982 1995-06-09 Geoff Voelker <voelker@cs.washington.edu> | |
1983 | |
1984 * make-dist: Copy new files nt/addpm.c and nt/emacs.bat.in. | |
1985 | |
1986 1995-06-08 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu> | |
1987 | |
1988 * configure.in: Check for -lpthread. | |
1989 | |
1990 1995-06-05 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu> | |
1991 | |
1992 * Makefile.in (install-arch-indep): Install info files for mh-e. | |
1993 (uninstall): Uninstall info files for dired-x, gnus, mh-e, and sc. | |
1994 | |
1995 1995-06-01 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu> | |
1996 | |
1997 * configure.in (*-solaris2.5): New configuration. | |
1998 | |
1999 * make-dist: Copy new files config.nt and config.w95. | |
2000 | |
2001 1995-05-30 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu> | |
2002 | |
2003 * configure.in: Use x_includes, not x_libraries, for -I. | |
2004 Make bitmapdir a colon-separated list. | |
2005 | |
2006 1995-05-27 Richard Stallman <rms@gnu.ai.mit.edu> | |
2007 | |
2008 * configure.in (hppa*-hp-hpux10*, m68k-hp-hpux10*): New configurations. | |
2009 | |
2010 * configure.in: Allow x_libraries and x_includes to be paths. | |
2011 | |
2012 1995-05-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu> | |
2013 | |
2014 * configure.in: Fix typo. | |
2015 | |
2016 1995-05-24 Karl Heuer <kwzh@hal.gnu.ai.mit.edu> | |
2017 | |
2018 * INSTALL: Clarify use of site-init.el. | |
2019 | |
2020 1995-05-22 enami tsugutomo <enami@sys.ptg.sony.co.jp> | |
2021 | |
2022 * configure.in: pass arg to sqrt. | |
2023 | |
2024 1995-05-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu> | |
2025 | |
2026 * make-dist: Fix May 6 change. | |
2027 | |
2028 1995-05-17 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu> | |
2029 | |
2030 * vpath.sed: Delete reference to ymakefile. | |
2031 | |
2032 1995-05-09 David J. MacKenzie <djm@geech.gnu.ai.mit.edu> | |
2033 | |
2034 * configure.in: Use sqrt (more portable) instead of fmod in -lm | |
2035 check. | |
2036 | |
2037 1995-05-09 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2038 | |
2039 * make-dist: Put nt/emacs.ico and nt/emacs.rc in dist. | |
2040 | |
2041 * update-subdirs: Specify /bin/sh to run the script. | |
2042 | |
2043 1995-05-06 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2044 | |
2045 * make-dist: Put src/makefile.nt in dist. | |
2046 | |
2047 * configure.in (i[345]86-*-bsdi2*): New configuration. | |
2048 (vax-dec-bsd386*): Deleted. | |
2049 | |
2050 1995-05-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu> | |
2051 | |
2052 * configure.in: Make sure CDPATH doesn't mess up PWD check. Check | |
2053 whether X bitmaps are in X11/bitmaps instead of bitmaps. Use fmod | |
2054 instead of logb in -lm check. | |
2055 | |
2056 1995-05-03 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2057 | |
2058 * configure.in (m68*-apollo-*): Renamed from m68*-apollo*. | |
2059 Use bsd4-3. Don't set NON_GNU_CPP. | |
2060 | |
2061 * make-dist: Don't copy in src/s/*.inp. Don't copy nt/src. | |
2062 In nt. copy various different things, but not *.cmd. | |
2063 Fix the ln commands for the subdirs of nt. | |
2064 | |
2065 1995-04-29 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2066 | |
2067 * configure.in (*-sun-sunos4.1.3*): Use sunos4shr.h. | |
2068 | |
2069 1995-04-27 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu> | |
2070 | |
2071 * configure.in (*-sun-sunos4.1.3*): Use shared libraries, | |
2072 since that's what the header file expects. | |
2073 | |
2074 1995-04-24 Francesco Potorti` (pot@cnuce.cnr.it) | |
2075 | |
2076 * configure.in (m68k-motorola-sysv*): Distinguish between 68030 | |
2077 and 68040 based machines when choosing options for gnucc. | |
2078 | |
2079 1995-04-13 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2080 | |
2081 * Makefile.in (top_distclean): Delete config.cache. | |
2082 | |
2083 1995-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2084 | |
2085 * Makefile.in (install-arch-indep): Delete .#* when copying subdirs. | |
2086 | |
2087 * configure.in: Use m/ncr386.h. | |
2088 | |
2089 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2090 | |
2091 * Makefile.in (install-arch-indep): Undo Sep 23 change. | |
2092 | |
2093 1995-04-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu> | |
2094 | |
2095 * make-dist (lib-src): Don't copy *.lex; it doesn't exist anymore. | |
2096 (man): Don't copy texindex.c and getopt.c; they're deleted. | |
2097 (etc): Omit `e'; it's a subdirectory. | |
2098 (etc/e): Use `../..', not `..', to reference top level. | |
2099 | |
2100 1995-04-06 Simon Leinen <simon@lia.di.epfl.ch> | |
2101 | |
2102 * Makefile.in (install-arch-indep, dist): | |
2103 look for `update-subdir' in $(srcdir). | |
2104 | |
2105 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2106 | |
2107 * make-dist: Include mkinstalldirs in distribution. | |
2108 | |
2109 1995-04-05 Karl Heuer <kwzh@hal.gnu.ai.mit.edu> | |
2110 | |
2111 * make-dist: Add missing close backquote. | |
2112 | |
2113 1995-04-02 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2114 | |
2115 * make-dist: Don't distribute shortnames directory. | |
2116 | |
2117 1995-03-12 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2118 | |
2119 * Makefile.in (blessmail): Pass archlibdir to the sub-make. | |
2120 | |
2121 1995-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2122 | |
2123 * configure.in (m88k-motorola-sysv4*): Use usg5-4-2. | |
2124 | |
2125 1995-02-23 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu> | |
2126 | |
2127 * configure.in (EMACS_CONFIG_OPTIONS): Use $ac_configure_args. | |
2128 | |
2129 1995-02-13 Richard Stallman <rms@pogo.gnu.ai.mit.edu> | |
2130 | |
2131 * configure.in (mips-sgi-irix6): New configuration. | |
2132 | |
2133 1995-02-07 Richard Stallman <rms@pogo.gnu.ai.mit.edu> | |
2134 | |
2135 * Makefile.in (maintainer-clean): Renamed from realclean. | |
2136 | |
2137 1995-02-02 David J. MacKenzie <djm@geech.gnu.ai.mit.edu> | |
2138 | |
2139 * configure.in: Create a .gdbinit that sources the real one, if | |
2140 using a different build directory. | |
2141 | |
2142 1995-01-23 Karl Heuer <kwzh@hal.gnu.ai.mit.edu> | |
2143 | |
2144 * configure.in: Check for sys/select.h. | |
2145 | |
2146 1995-01-02 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2147 | |
2148 * configure.in: On sunos4.1.3 and sunus4shr, set NON_GNU_CPP. | |
2149 | |
2150 1994-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2151 | |
2152 * configure.in: Handle isc 4.1 operating system. | |
2153 | |
2154 1994-12-10 Richard Stallman <rms@kepa> | |
2155 | |
2156 * configure.in (rs6000-ibm-aix4.1*): New alternative. | |
2157 (rs6000-ibm-aix4*): New alternative. | |
2158 | |
2159 1994-12-06 Richard Stallman <rms@kepa> | |
2160 | |
2161 * configure.in: For SVR4.2, set NON_GNU_CPP if not already set. | |
2162 | |
2163 1994-11-30 David J. MacKenzie <djm@duality.gnu.ai.mit.edu> | |
2164 | |
2165 * configure.in: Don't try to make directories that are guaranteed | |
2166 to already exist. | |
2167 | |
2168 1994-11-23 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2169 | |
2170 * configure.in: Generate man/Makefile from man/Makefile.in. | |
2171 Create the man subdir. | |
2172 | |
2173 * Makefile.in (dvi): Run Make in our man subdir. | |
2174 | |
2175 * make-dist: Create subdir etc/e. | |
2176 Make links to it. | |
2177 Put man/Makefile.in in dist, instead of man/Makefile. | |
2178 | |
2179 1994-11-21 David J. MacKenzie (djm@mole.gnu.ai.mit.edu) | |
2180 | |
2181 * configure.in: Add --with-pop, --with-kerberos, and | |
2182 --with-hesiod for movemail. | |
2183 | |
2184 1994-11-17 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2185 | |
2186 * configure.in (m68*-apollo*): Use s/domain.h. | |
2187 | |
2188 1994-11-14 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2189 | |
2190 * configure.in (m68*-apollo*): Set NON_GNU_CPP. | |
2191 | |
2192 1994-11-14 David J. MacKenzie (djm@geech.gnu.ai.mit.edu) | |
2193 | |
2194 * configure.in: Don't add -I, -L, -R options for cc if their | |
2195 arguments would be empty. | |
2196 | |
2197 1994-11-11 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2198 | |
2199 * configure.in (i860-intel-osf1*): New alternative. | |
2200 (mips-sgi-irix5.[01]*): Distinguish from irix5*. | |
2201 (mips-sgi-irix*): Now an alias for mips-sgi-irix5*. | |
2202 | |
2203 1994-11-09 David J. MacKenzie <djm@duality.gnu.ai.mit.edu> | |
2204 | |
2205 * configure.in: Make h_errno check not use nested functions. | |
2206 | |
2207 1994-11-09 Richard Stallman <rms@pogo.gnu.ai.mit.edu> | |
2208 | |
2209 * Makefile.in (install-arch-indep): Delete *.orig in copied dirs. | |
2210 | |
2211 1994-11-08 Roland McGrath <roland@churchy.gnu.ai.mit.edu> | |
2212 | |
2213 * Makefile.in (install-arch-indep): Avoid continued comment | |
2214 swallowing target line. | |
2215 | |
2216 1994-11-08 David J. MacKenzie (djm@churchy.gnu.ai.mit.edu) | |
2217 | |
2218 * configure.in: Protect a character class with `changequote'. | |
2219 | |
2220 1994-11-07 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu> | |
2221 | |
2222 * configure.in: Accept `news' as a synonym for `newsos'. | |
2223 | |
2224 1994-11-03 Karl Heuer <kwzh@hal.gnu.ai.mit.edu> | |
2225 | |
2226 * Makefile.in: Don't rm files if cd fails. | |
2227 | |
2228 1994-11-01 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2229 | |
2230 * make-dist: Put nt subdir and its subdirs in the dist. | |
2231 (lib-src): Put makefile.nt in the dist. | |
2232 (lisp): Put makefile.nt in the dist. | |
2233 | |
2234 1994-10-29 David J. MacKenzie (djm@geech.gnu.ai.mit.edu) | |
2235 | |
2236 * configure.in: Change a stray `[' to `test'. | |
2237 | |
2238 1994-10-28 David J. MacKenzie <djm@duality.gnu.ai.mit.edu> | |
2239 | |
2240 * configure.in: Adapt for Autoconf v2. Use the standard argument | |
2241 parser, host type canonicalizer, X11 finder, and message | |
2242 printing macros. Use the new macro names. Use `test' instead of `['. | |
2243 | |
2244 1994-10-26 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2245 | |
2246 * configure.in: Check for getpagesize. | |
2247 | |
2248 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2249 | |
2250 * make-dist (msdos): Put sed* in the distribution. | |
2251 | |
2252 1994-10-17 Morten Welinder <terra@mole.gnu.ai.mit.edu> | |
2253 | |
2254 * config.bat: New option, `--with-x', for configuring Emacs | |
2255 for use with the X11 system DesqView/X. | |
2256 New option, `--no-debug', for compiling Emacs without debug | |
2257 information thus saving disk space. | |
2258 (src/config.h, src/paths.h): Use `update' (which is like | |
2259 `move-if-changed') to change the file. | |
2260 (src/config.h): When configuring for X11 perform extra changes. | |
2261 (src/makefile): When configuring for X11 perform extra changes. | |
2262 (lib-src): Remove temporary files. | |
2263 (): Check that `sed', `rm', `mv', and `gcc' are available. | |
2264 | |
2265 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2266 | |
2267 * Makefile.in (sharedstatedir): Substitute sharedstatedir properly. | |
2268 | |
2269 * configure.in (bitmapdirs): Default to /usr/include/X11/bitmaps. | |
2270 | |
2271 1994-10-16 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2272 | |
2273 * configure.in (EMACS_CONFIGURATION): Use $canonical as value. | |
2274 | |
2275 * configure.in (canonical): Substitute var into makefiles. | |
2276 (bitmapdir): Likewise. | |
2277 | |
2278 * Makefile.in (bitmapdir): New variable. | |
2279 (src/paths.h, paths-force): Edit PATH_BITMAPS. | |
2280 | |
2281 1994-10-15 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2282 | |
2283 * make-dist: Put update-subdirs and lisp/subdirs.el in the dist. | |
2284 | |
2285 * Makefile.in (dist, install-arch-indep): Run update-subdirs. | |
2286 * update-subdirs: New shell script. | |
2287 | |
2288 1994-10-13 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2289 | |
2290 * Makefile.in (top_distclean): Don't rm build-install. | |
2291 (SOURCES): Delete build-install.in. | |
2292 | |
2293 * make-dist: Don't distribute build-ins.in. | |
2294 * build-ins.in: File deleted. | |
2295 | |
2296 1994-10-12 David J. MacKenzie (djm@duality.gnu.ai.mit.edu) | |
2297 | |
2298 * Makefile.in (mkdir): Use mkinstalldirs instead of make-path. | |
2299 | |
2300 1994-10-11 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2301 | |
2302 * Makefile.in: Use libexecdir and sharedstatedir as appropriate. | |
2303 | |
2304 * configure.in (libexecdir): Renamed from libdir. New default. | |
2305 (sharedstatedir): Renamed from statedir. New default. | |
2306 (datadir): New default. | |
2307 | |
2308 * make-dist: Don't distribute subdirs.el. | |
2309 | |
2310 1994-10-07 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2311 | |
2312 * configure.in (eaccess): Check for it. | |
2313 | |
2314 1994-10-04 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2315 | |
2316 * configure.in (mktime): Check for it. | |
2317 | |
2318 1994-10-02 Paul Reilly <pmr@geech.gnu.ai.mit.edu> | |
2319 | |
2320 * configure.in (motif): Add support for usage and option checking. | |
2321 | |
2322 1994-09-24 Richard Stallman <rms@churchy.gnu.ai.mit.edu> | |
2323 | |
2324 * configure.in (utimes): Check for it. | |
2325 | |
2326 1994-09-23 Richard Stallman <rms@churchy.gnu.ai.mit.edu> | |
2327 | |
2328 * Makefile.in (install-arch-indep): Don't do mkdir here. | |
2329 | |
2330 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2331 | |
2332 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*): | |
2333 riscix.h renamed to acorn.h. | |
2334 | |
2335 1994-09-21 Michael Ben-Gershon (mybg@cs.huji.ac.il) | |
2336 | |
2337 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*): | |
2338 New configurations. | |
2339 | |
2340 1994-09-21 David J. MacKenzie (djm@geech.gnu.ai.mit.edu) | |
2341 | |
2342 * configure.in: Remove trailing slashes from srcdir. | |
2343 | |
2344 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2345 | |
2346 * configure.in (i[345]86-sequent-ptx*): Handle | |
2347 | |
2348 1994-09-20 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2349 | |
2350 * Makefile.in (paths-force): Depend on src/paths.h | |
2351 | |
2352 1994-09-19 Karl Heuer <kwzh@hal.gnu.ai.mit.edu> | |
2353 | |
2354 * configure.in (config_options): Save all arguments, not just some. | |
2355 | |
2356 1994-09-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu> | |
2357 | |
2358 * Makefile.in (install-arch-indep): Copy DOC-*, not DOC* | |
2359 | |
2360 * configure.in: Add AC_AIX. | |
2361 Add checks to set HAVE_STRUCT_UTIMBUF, HAVE_TIMEVAL, HAVE_SELECT. | |
2362 | |
2363 1994-09-18 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2364 | |
2365 * configure.in (parsing options): Simplify sed command to delete -'s. | |
2366 | |
2367 1994-09-16 Karl Heuer <kwzh@churchy.gnu.ai.mit.edu> | |
2368 | |
2369 * configure.in (config_options): New shell variable. | |
2370 Pass its value to C code in EMACS_CONFIG_OPTIONS. | |
2371 | |
2372 1994-09-16 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2373 | |
2374 * configure.in (alpha-dec-osf*): New target. | |
2375 | |
2376 * Makefile.in: Use just one FRC target. | |
2377 | |
2378 1994-09-15 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2379 | |
2380 * Makefile.in (removenullpaths, paths-force): | |
2381 Use name paths.h.tmp$$, which depends on the pid. | |
2382 | |
2383 1994-09-14 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2384 | |
2385 * Makefile.in (removenullpaths, paths-force): | |
2386 Put paths.h.tmp in top-level dir, not in src. | |
2387 | |
2388 1994-09-11 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2389 | |
2390 * Version 19.27 released. | |
2391 | |
2392 1994-09-07 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2393 | |
2394 * Version 19.26 released. | |
2395 | |
2396 1994-09-04 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2397 | |
2398 * configure.in: Check for lrand48, not rand48. | |
2399 | |
2400 1994-09-03 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2401 | |
2402 * configure.in (powerpc-ibm-aix3.1*, powerpc-ibm-aix3.2.5) | |
2403 (powerpc-ibm-aix*): New aliases. | |
2404 | |
2405 1994-08-21 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2406 | |
2407 * make-dist (src/m, src/s): Put *.inp in distribution. | |
2408 | |
2409 1994-08-19 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2410 | |
2411 * configure.in: Accept i586 and i486 along with i386. | |
2412 | |
2413 1994-08-15 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2414 | |
2415 * configure.in: Do compute unexec, LIBX, system_malloc, etc | |
2416 even if CPP env var was set by the user. | |
2417 | |
2418 * configure.in (i[34]86-*-*): For SCO 3.2v4, fix NON_GNU_CPP value. | |
2419 | |
2420 1994-08-14 Jonathan I. Kamens (jik@gza-client1.aktis.com) | |
2421 | |
2422 * Makefile.in: Uninstall "$(EMACS)", not "emacs". | |
2423 | |
2424 1994-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2425 | |
2426 * configure.in (i[34]86-*-*): For SCO 3.2v4, set NON_GNU_CPP. | |
2427 | |
2428 1994-08-09 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2429 | |
2430 * configure.in: Check more specifically for i*86-sun-sunos. | |
2431 | |
2432 1994-08-03 Caveh Jalali (caveh@eng.sun.com) | |
2433 | |
2434 * configure.in: Handle solaris 2.4. | |
2435 | |
2436 1994-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2437 | |
2438 * configure.in (rand48): Check for it. | |
2439 | |
2440 1994-07-26 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2441 | |
2442 * make-dist: Update the info files. | |
2443 | |
2444 1994-07-25 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2445 | |
2446 * configure.in: Make "checking..." messages' style consistent. | |
2447 (HAVE_H_ERRNO): New test. | |
2448 | |
2449 1994-07-24 Richard Stallman <rms@mole.gnu.ai.mit.edu> | |
2450 | |
2451 * configure.in (i860-*-sysv4*): Set NON_GNU_CC and NON_GNU_CPP. | |
2452 | |
2453 1994-07-12 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2454 | |
2455 * configure.in (CFLAGS): If the envvar was specified, use that. | |
2456 And set REAL_CFLAGS from it too. | |
2457 | |
2458 1994-07-11 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2459 | |
2460 * make-dist: Update finder-inf.el. | |
2461 | |
2462 1994-07-07 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2463 | |
2464 * make-dist (msdos): Include sed4.inp in dist. | |
2465 | |
2466 * Makefile.in (libsrc_libs): Var deleted. | |
2467 | |
2468 1994-07-06 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2469 | |
2470 * Makefile.in (mkdir, removenullpaths): Put g in sed replace commands. | |
2471 | |
2472 1994-06-26 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2473 | |
2474 * configure.in (mips-sony-newsos4*): New alias. | |
2475 | |
2476 1994-06-23 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2477 | |
2478 * configure.in (*-convex-bsd*): Set NON_GNU_CPP. | |
2479 (*-convex-convexos*): Accept this as alias. | |
2480 | |
2481 1994-06-19 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2482 | |
2483 * configure.in: Get CFLAGS both with and without THIS_IS_CONFIGURE, | |
2484 for two different uses. | |
2485 | |
2486 1994-06-15 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2487 | |
2488 * configure.in: Define THIS_IS_CONFIGURE when extracting CFLAGS etc. | |
2489 | |
2490 1994-06-14 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2491 | |
2492 * make-dist: Put ./BUGS into the distrib. | |
2493 | |
2494 1994-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2495 | |
2496 * configure.in: Handle 386 running Solaris 2. | |
2497 | |
2498 1994-06-06 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2499 | |
2500 * configure.in (mips-siemens-sysv*): Use cpp, not cc -E. | |
2501 | |
2502 1994-06-05 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2503 | |
2504 * configure.in (mips-sony-newsos*): Use news-risc.h. | |
2505 | |
2506 * configure.in: Accept bsdi as opsys, like bsd386. | |
2507 | |
2508 1994-06-01 Morten Welinder (terra@diku.dk) | |
2509 | |
2510 * config.bat (src/paths.h): Use sed script msdos/sed4.inp. | |
2511 | |
2512 1994-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2513 | |
2514 * Version 19.25 released. | |
2515 | |
2516 * make-dist (shortversion): Don't assume another period follows. | |
2517 | |
2518 1994-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2519 | |
2520 * Makefile.in (install-arch-indep): Use /bin/pwd uniformly, not pwd. | |
2521 (uninstall): Use /bin/pwd. | |
2522 | |
2523 * Makefile.in (blessmail): Depend on src. | |
2524 (all): Don't depend on blessmail. | |
2525 | |
2526 * Makefile.in (src/paths.h): Don't force recomputation. | |
2527 (paths-force): New target; force recomputation of paths.h. | |
2528 (all): Depend on paths-force. | |
2529 (src, lib-src): Depend on src/paths.h. | |
2530 | |
2531 * configure.in (*-sun-sunos4*): Set GCC_TEST_OPTIONS, | |
2532 NON_GCC_TEST_OPTIONS. | |
2533 | |
2534 1994-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2535 | |
2536 * configure.in: Don't insist on subversions for irix. | |
2537 | |
2538 1994-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2539 | |
2540 * configure.in (hppa*-hp-hpux9shr): Move alternative up. | |
2541 | |
2542 * configure.in (i[34]86-next-*): New alternative. | |
2543 | |
2544 1994-05-23 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2545 | |
2546 * Version 19.24 released. | |
2547 | |
2548 * configure.in: New config hppa*-hp-hpux9shr*. | |
2549 | |
2550 1994-05-22 Morten Welinder (terra@tyr.diku.dk) | |
2551 | |
2552 * config.bat: Doc fix. | |
2553 | |
2554 1994-05-21 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2555 | |
2556 * Makefile.in (mostlyclean, clean, distclean, realclean) | |
2557 (extraclean): Don't act on man subdir if it doesn't exist. | |
2558 | |
2559 1994-05-20 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2560 | |
2561 * configure.in (GCC_TEST_OPTIONS, NON_GCC_TEST_OPTIONS): New vars. | |
2562 Use them to set up CC. | |
2563 (*-sun-sunos4.1.3): Set them. | |
2564 | |
2565 1994-05-19 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2566 | |
2567 * Makefile.in (lib-src): Don't depend on src/paths.h. | |
2568 | |
2569 1994-05-18 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2570 | |
2571 * build-ins.in (copydests): Get rid of spurious `-'s. | |
2572 | |
2573 * configure.in: Define EMACS_CONFIGURATION instead of CONFIGURATION. | |
2574 | |
2575 1994-05-17 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2576 | |
2577 * Version 19.23 released. | |
2578 | |
2579 * configure.in [HAVE_X11]: Merge $C_SWITCH_X_SITE into CFLAGS | |
2580 for the Xlib and Xt checks; then restore old CFLAGS. | |
2581 | |
2582 1994-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2583 | |
2584 * configure.in (HAVE_X11XTR6): Add newline before #if. | |
2585 Add newline after #endif. | |
2586 | |
2587 1994-05-13 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2588 | |
2589 * configure.in (HAVE_X11XTR6): Arrange to define it. | |
2590 | |
2591 1994-05-12 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2592 | |
2593 * Makefile.in (install): Depend on blessmail. | |
2594 | |
2595 1994-05-12 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu) | |
2596 | |
2597 * configure.in (mips-siemens-sysv*): Put quotes around value | |
2598 containing blanks. | |
2599 | |
2600 1994-05-11 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2601 | |
2602 * Makefile.in (TAGS): Use the makefile in src subdir. | |
2603 | |
2604 1994-05-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu) | |
2605 | |
2606 * configure.in (opsys): Recognize `gnu'. | |
2607 | |
2608 1994-05-10 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2609 | |
2610 * configure.in (using NON_GNU_CPP): Fix test for CPP already set. | |
2611 | |
2612 1994-05-09 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu) | |
2613 | |
2614 * configure.in: Remove AC_LANG_C call. Not needed with Autoconf | |
2615 version > 1.8. | |
2616 | |
2617 1994-05-08 Morten Welinder (terra@diku.dk) | |
2618 | |
2619 * config.bat: Forcibly remove "# " style comments from makefiles. | |
2620 | |
2621 1994-05-08 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2622 | |
2623 * Makefile.in (uninstall): When processing lispdir and etcdir, | |
2624 do nothing unless it exists and is a directory. | |
2625 | |
2626 1994-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2627 | |
2628 * Makefile.in (install-arch-indep): Do install info/dired-x*. | |
2629 Merge code in from install-doc. | |
2630 (install-doc): Merge code back into install-arch-indep. | |
2631 (install-arch-dep): Don't depend on install-doc. | |
2632 | |
2633 * configure.in (run_in_place): Don't use pwd for archlibdir and docdir. | |
2634 | |
2635 1994-05-04 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2636 | |
2637 * configure.in (making src/Makefile and lib-src/Makefile): | |
2638 Split off the autoconf substitutions and don't pass them thru cpp. | |
2639 (undefs): Use $canonical as well as $configuration. | |
2640 | |
2641 * make-dist: Distribute lisp/Makefile. | |
2642 | |
2643 * configure.in: Recognize m88k-dg-dgux5.4.3* and m88k-dg-dgux5.4.2*. | |
2644 Use lower case names for the s files. | |
2645 | |
2646 1994-05-03 Morten Welinder (terra@diku.dk) | |
2647 | |
2648 * config.bat: Added possibility for different file name | |
2649 transscriptions in lib-src. | |
2650 | |
2651 1994-05-03 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2652 | |
2653 * Makefile.in (lib-src): Undo previous change. | |
2654 (blessmail): New target to run maybe-blessmail in lib-src. | |
2655 (all): Depend on blessmail. | |
2656 | |
2657 * Makefile.in (lib-src): Depend on src. | |
2658 | |
2659 1994-04-30 Paul Reilly (pmr@churchy.gnu.ai.mit.edu) | |
2660 | |
2661 * configure.in (m88k-dg-dgux5.4R3): Use dgux5-4R3. | |
2662 (m88k-dg-dgux5.4R2): dgux5.4R2. | |
2663 | |
2664 1994-04-29 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2665 | |
2666 * configure.in (window_system): Restore accidentally deleted code | |
2667 that uses AC_FIND_X. | |
2668 | |
2669 * make-dist: Distribute config.bat. | |
2670 | |
2671 1994-04-29 Morten Welinder (terra@diku.dk) | |
2672 | |
2673 * config.bat: Corrected the configuration of lib-src | |
2674 to keep up with configure. Add note about dos version 3 | |
2675 or better needed (djgpp needs that). Add note explaining | |
2676 that either install in c:/emacs or edit the script. | |
2677 Don't change to c:/emacs, but assume we're there (to minimize | |
2678 the number of places to change). | |
2679 | |
2680 * config.bat: Build-in the first step towards X11 support with | |
2681 the X11 emulator that exists. At this time it won't work, | |
2682 and several files are missing. | |
2683 | |
2684 1994-04-28 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2685 | |
2686 * configure.in: Use m/hp800.h in place of m/hp9000s800.h. | |
2687 Don't look for -lresolv. | |
2688 | |
2689 * Makefile.in (lib-src): Depend on src/paths.h. | |
2690 | |
2691 1994-04-27 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2692 | |
2693 * configure.in: Restore deleted AC_SUBST of `configuration'. | |
2694 Improve error message for bad --with-x-toolkit value. | |
2695 | |
2696 * configure.in: Define CONFIGURATION in src/config.h | |
2697 rather than substituting in src/Makefile.in. | |
2698 | |
2699 1994-04-26 Karl Heuer (kwzh@hal.gnu.ai.mit.edu) | |
2700 | |
2701 * Makefile.in (install-doc): New target. | |
2702 (install-arch-dep): Depend on install-doc. | |
2703 (mkdir): Create docdir. | |
2704 | |
2705 1994-04-22 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2706 | |
2707 * configure.in: Test for libresolv.a. | |
2708 Substitute machfile and opsysfile. | |
2709 | |
2710 1994-04-22 Karl Heuer (kwzh@hal.gnu.ai.mit.edu) | |
2711 | |
2712 * Makefile.in (.PHONY, install): Kill reference to obsolete do-install. | |
2713 (install-arch-dep): Install under the name $(EMACS). | |
2714 | |
2715 1994-04-21 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2716 | |
2717 * configure.in (version): Use entire value of emacs-version. | |
2718 (mips-siemens-sysv*): New alternative. | |
2719 | |
2720 1994-04-19 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2721 | |
2722 * Makefile.in (install-arch-indep): Don't install dired-x*. | |
2723 | |
2724 1994-04-18 Karl Heuer (kwzh@hal.gnu.ai.mit.edu) | |
2725 | |
2726 * configure.in (src/Makefile, lib-src/Makefile): Delete ^L. | |
2727 Fix definition of $undefs. | |
2728 | |
2729 1994-04-17 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2730 | |
2731 * configure.in (window_system): Obey --with-x11=no and --with-x10=no. | |
2732 | |
2733 * configure.in (lib-src/Makefile.in): Use src, not lib-src, in -I. | |
2734 | |
2735 1994-04-16 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu) | |
2736 | |
2737 * configure.in: Call AC_LANG_C, if it's defined, after AC_PREPARE. | |
2738 | |
2739 1994-04-16 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2740 | |
2741 * configure.in (lib-src/Makefile.in): Make this from Makefile.in.in | |
2742 and run it thru cpp, as with src/Makefile.in. | |
2743 | |
2744 * configure.in: Use AC_SET_MAKE. | |
2745 | |
2746 1994-04-15 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2747 | |
2748 * configure.in (i[34]86-ncr-sysv*): Use usg5-4-2. | |
2749 | |
2750 1994-04-13 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2751 | |
2752 * Makefile.in (MAKE): Don't just assign it--use @SET_MAKE@. | |
2753 | |
2754 * configure.in (CFLAGS): Exclude ${CFLAGS} from singlequotes. | |
2755 (printing the choices): Make the toolkit message unconditional. | |
2756 (USE_X_TOOLKIT): Use `none', not `no', if none. | |
2757 (include libsrc_libs): Include config.h, and specify -I for srcdir. | |
2758 Get rid of temp file foofoo1. | |
2759 | |
2760 1994-04-13 Karl Heuer (kwzh@hal.gnu.ai.mit.edu) | |
2761 | |
2762 * configure.in (CFLAGS): Use shell syntax, not Makefile. | |
2763 | |
2764 1994-04-12 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2765 | |
2766 * configure.in (window_system): If no X, set USE_X_TOOLKIT=no. | |
2767 (printing the choices): State choice of toolkit. | |
2768 (libsrc_libs): Recalculate after writing config.h; | |
2769 then update lib-src/Makefile. | |
2770 | |
2771 1994-04-11 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2772 | |
2773 * configure.in: Add sunos4shr as alternative for suns. | |
2774 Conditionals testing for null $CC were backwards. | |
2775 | |
2776 1994-04-10 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2777 | |
2778 * make-dist (msdos): Don't link patch1. Link sed*.inp, not sed.in*. | |
2779 | |
2780 1994-04-09 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2781 | |
2782 * configure.in: Handle -isc4.0*. | |
2783 | |
2784 1994-03-30 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2785 | |
2786 * configure.in (esix5): Set NON_GNU_CPP. | |
2787 | |
2788 1994-03-24 Roland McGrath (roland@mole.gnu.ai.mit.edu) | |
2789 | |
2790 * Makefile.in (thisdir): Nonsensical variable removed. | |
2791 (install-arch-indep): Set shell var thisdir=`pwd` before cd and cd | |
2792 back to $thisdir, rather than the directory `this_dir'. | |
2793 | |
2794 1994-03-17 Roland McGrath (roland@churchy.gnu.ai.mit.edu) | |
2795 | |
2796 * Makefile.in (install-arch-indep): Add missing backslash after a | |
2797 `then'. | |
2798 | |
2799 1994-03-14 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2800 | |
2801 * Makefile.in (thisdir): New variable. | |
2802 (install-arch-indep): Go back to thisdir to run INSTALL_DATA. | |
2803 | |
2804 1994-03-08 Karl Heuer (kwzh@hal.gnu.ai.mit.edu) | |
2805 | |
2806 * configure.in: Add freebsd. | |
2807 | |
2808 1994-03-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu) | |
2809 | |
2810 * configure.in: Check for fpathconf. | |
2811 | |
2812 1994-03-02 Karl Heuer (kwzh@hal.gnu.ai.mit.edu) | |
2813 | |
2814 * configure.in (with_x_toolkit): Fix typo in previous change. | |
2815 | |
2816 1994-03-01 Karl Heuer (kwzh@hal.gnu.ai.mit.edu) | |
2817 | |
2818 * configure.in: New s-file for rs60000-ibm-aix3.2.5. | |
2819 | |
2820 1994-02-26 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2821 | |
2822 * configure.in (with_x_toolkit): Don't allow motif or open-look. | |
2823 | |
2824 1994-02-24 Karl Heuer (kwzh@hal.gnu.ai.mit.edu) | |
2825 | |
2826 * configure.in: Fix value of docdir. | |
2827 * Makefile.in (install-arch-indep): Install DOC* in docdir. | |
2828 | |
2829 1994-02-24 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2830 | |
2831 * configure.in (*-sysv4.1): Set NON_GNU_CPP. | |
2832 | |
2833 1994-02-22 Karl Heuer (kwzh@geech.gnu.ai.mit.edu) | |
2834 | |
2835 * configure.in: New variable docdir to control where the docstring | |
2836 file goes. | |
2837 Makefile.in: Use it to initialize PATH_DOC in paths.h. | |
2838 | |
2839 1994-02-22 Karl Heuer (kwzh@mole.gnu.ai.mit.edu) | |
2840 | |
2841 * configure.in: When --run-in-place, don't inherit archlibdir. | |
2842 | |
2843 1994-02-19 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2844 | |
2845 * Makefile.in (install-arch-dep, install-arch-indep): | |
2846 New targets split up former do-install rule. | |
2847 (do-install): Target deleted. | |
2848 | |
2849 1994-02-16 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2850 | |
2851 * configure.in (mips-sony-newsos*): New configuration. | |
2852 | |
2853 1994-02-14 Frederic Pierresteguy (fp@mole.gnu.ai.mit.edu) | |
2854 | |
2855 * configure.in (rs6000-bull-bosx*): Added support for BULL dpx20. | |
2856 | |
2857 1994-02-11 Karl Heuer (kwzh@mole.gnu.ai.mit.edu) | |
2858 | |
2859 * configure.in: Fix misspelled symbol LD_SWITCH_X_SITE_AUX. | |
2860 | |
2861 1994-02-11 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2862 | |
2863 * configure.in: Don't initialize CC. | |
2864 | |
2865 1994-02-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu) | |
2866 | |
2867 * configure.in (creating src/Makefile): Also generate -U switches | |
2868 for symbols in the $configuration value. | |
2869 | |
2870 * configure.in: Check for sys_siglist being declared in system header. | |
2871 | |
2872 1994-02-10 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2873 | |
2874 * configure.in (creating src/Makefile): Delete blank lines | |
2875 along with lines of whitespace. | |
2876 (m68k-motorola-sysv*, m68000-motorola-sysv*): Compute proper CC value. | |
2877 | |
2878 1994-02-09 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2879 | |
2880 * configure.in: Get, use, and substitute C_SWITCH_MACHINE | |
2881 like C_SWITCH_SYSTEM. | |
2882 (m68*-motorola-sysv*): Set CC. Require cpu type to be m68k or m68000. | |
2883 | |
2884 1994-02-04 Karl Heuer (kwzh@mole.gnu.ai.mit.edu) | |
2885 | |
2886 * configure.in (drem): Check for this function. | |
2887 | |
2888 1994-02-03 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2889 | |
2890 * configure.in (Using NON_GNU_CPP): Don't lose if it has spaces. | |
2891 If CPP was inherited from environment, don't use NON_GNU_CPP. | |
2892 (NON_GNU_CC): Likewise. | |
2893 (handling with_gcc): Use explicit if in the `no' case. | |
2894 (cc_specified): New variable; if set, don't use NON_GNU_CC. | |
2895 | |
2896 1994-02-02 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2897 | |
2898 * configure.in (mips-mips-riscos4*): Set NON_GNU_CPP. | |
2899 | |
2900 1994-02-01 Karl Heuer (kwzh@mole.gnu.ai.mit.edu) | |
2901 | |
2902 * configure.in: Check whether fmod exists. | |
2903 | |
2904 1994-01-31 Roland McGrath (roland@churchy.gnu.ai.mit.edu) | |
2905 | |
2906 * make-dist: Distribute {src,lisp}/ChangeLog.? instead of | |
2907 {src,lisp}/OChangeLog. | |
2908 | |
2909 1994-01-22 Roland McGrath (roland@churchy.gnu.ai.mit.edu) | |
2910 | |
2911 * configure.in: Restore Jan 8 and Jan 16 changes. The -U hack is | |
2912 necessary for proper operation. This code works with the current | |
2913 released version of Autoconf. | |
2914 | |
2915 1994-01-21 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2916 | |
2917 * configure.in (with_x_toolkit): Treat values athena and lucid alike. | |
2918 (USE_X_TOOLKIT): Define it for all values except `no'. | |
2919 | |
2920 * configure.in: Undo first Jan 8 change and Jan 16 change. | |
2921 | |
2922 1994-01-18 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2923 | |
2924 * configure.in: Handle --with-x-toolkit. Produce lwlib/Makefile. | |
2925 Substitute USE_X_TOOLKIT as both C macro and Make variable. | |
2926 | |
2927 * Makefile.in (lwlib/Makefile): New target. | |
2928 (SUBDIR_MAKEFILES): Depend on lwlib/Makefile. | |
2929 (clean, mostlyclean, distclean, realclean): Handle lwlib subdir. | |
2930 (unlock, relock): Handle lwlib subdir. | |
2931 | |
2932 * Makefile.in: Add some .PHONY targets. | |
2933 | |
2934 * make-dist: Handle lwlib subdir like oldXMenu subdir. | |
2935 | |
2936 * lwlib: New subdirectory. | |
2937 | |
2938 1994-01-17 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2939 | |
2940 * configure.in: If CPP has a value that is a directory, | |
2941 discard the value. | |
2942 | |
2943 1994-01-16 Roland McGrath (roland@churchy.gnu.ai.mit.edu) | |
2944 | |
2945 * configure.in (srcdir_undefs): Add g flag to sed substitution to | |
2946 remove -U[0-9]*. | |
2947 | |
2948 1994-01-15 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2949 | |
2950 * Makefile.in (do-install): Install the dired-x info files. | |
2951 | |
2952 * configure.in: Provide for variable LD_SWITCH_X_SITE_AUX. | |
2953 (See src/s/sol2.h.) | |
2954 | |
2955 1994-01-12 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2956 | |
2957 * configure.in (m68k-harris-cxux*, m88k-harris-cxux*): New configs. | |
2958 | |
2959 1994-01-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu) | |
2960 | |
2961 * configure.in (creating src/Makefile): Put code inside 2nd arg to | |
2962 AC_OUTPUT as it should be; hopefully noone will again see fit to | |
2963 gratuitously break this and not make a change log entry. | |
2964 Optimized sed processing of Makefile.in and cpp output; now | |
2965 preserves comments previously removed from the cpp input. | |
2966 Eliminated temp file for cpp output. Generate -U switches to | |
2967 undefine all identifiers that appear in the directory name | |
2968 ${srcdir}; pass these to cpp. | |
2969 | |
2970 * configure.in (version): Fix sed regexp to match two-elt version | |
2971 number. | |
2972 | |
2973 * configure.in: Check for strerror. | |
2974 | |
2975 1994-01-07 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2976 | |
2977 * configure.in: Test for bcmp. | |
2978 | |
2979 1994-01-06 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2980 | |
2981 * make-dist (tempdir): Put subdir msdos into the distribution. | |
2982 | |
2983 1993-01-07 Morten Welinder (terra@diku.dk) | |
2984 | |
2985 * config.bat: New file. | |
2986 | |
2987 1994-01-02 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2988 | |
2989 * Makefile.in (${SUBDIR} target): Pass down LDFLAGS and CPPFLAGS. | |
2990 | |
2991 1994-01-01 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2992 | |
2993 * configure.in (m68*-next-*): Don't care about which os is specified. | |
2994 (i[34]86-*-*): Check for *-nextstop*. | |
2995 | |
2996 1993-12-24 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
2997 | |
2998 * configure.in: Check for setsid. | |
2999 | |
3000 1993-12-17 Richard Stallman (rms@srarc2) | |
3001 | |
3002 * configure.in (*-sun-solaris*): Add special case for Solaris 2.3. | |
3003 | |
3004 1993-12-15 Richard Stallman (rms@srarc2) | |
3005 | |
3006 * Makefile.in (mkdir): Make only the lockdir writable. | |
3007 | |
3008 * configure.in (i860-*-sysv4): Renamed from i860-*-sysvr4. | |
3009 | |
3010 1993-12-11 Richard Stallman (rms@srarc2) | |
3011 | |
3012 * Makefile.in (libdir): Use @libdir@. | |
3013 | |
3014 1993-12-08 Richard Stallman (rms@srarc2) | |
3015 | |
3016 * Makefile.in (install): Add empty command. | |
3017 | |
3018 1993-12-04 Richard Stallman (rms@srarc2) | |
3019 | |
3020 * make-dist: Put man/getopt.c in the dist. | |
3021 | |
3022 * configure.in (LIBS): Add test for existence of XSetWMProtocols. | |
3023 | |
3024 * Makefile.in (install): Depend on ${SUBDIR}, not `all'. | |
3025 | |
3026 1993-12-03 Richard Stallman (rms@srarc2) | |
3027 | |
3028 * configure.in (solaris): Set NON_GNU_CPP instead of CPP. | |
3029 Set it for all solaris versions. | |
3030 (mips-mips-riscos4*): Set NON_GNU_CC, not CC. | |
3031 (after checking for GCC): If not GCC, and NON_GNU_CPP is set, set CPP. | |
3032 Likewise for NON_GNU_CC and CC. | |
3033 | |
3034 1993-12-01 Richard Stallman (rms@srarc2) | |
3035 | |
3036 * configure.in (mips-mips-riscos4*): Assign variable CC. | |
3037 (checking ${with_gcc}): If "no", don't override CC if already set. | |
3038 (CC): Initialize it as empty. | |
3039 | |
3040 1993-11-30 Richard Stallman (rms at srarc2) | |
3041 | |
3042 * configure.in (Suns): Set CPP if *-solaris2.3*. | |
3043 | |
3044 1993-11-27 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3045 | |
3046 * Version 19.22 released. | |
3047 | |
3048 * Makefile.in (do-install): Use umask 022 in copying etc and lisp dirs. | |
3049 | |
3050 1993-11-25 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3051 | |
3052 * make-dist: When breaking links, use cp -p. | |
3053 Copy install.sh into distribution. | |
3054 Move the temp dir up into the parent dir; | |
3055 don't leave the staging dir make-dist.tmp... in existence. | |
3056 * install.sh: New file. | |
3057 | |
3058 1993-11-21 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3059 | |
3060 * configure.in (i[34]86-ncr-sysv*): New specific alternative. | |
3061 | |
3062 1993-11-20 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3063 | |
3064 * configure.in (version): When --run-in-place, exclude | |
3065 ${datadir}/emacs/site-lisp from locallisppath. | |
3066 | |
3067 1993-11-18 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3068 | |
3069 * configure.in: Delete jumk.c before writing it. | |
3070 | |
3071 1993-11-16 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3072 | |
3073 * Version 19.21 released. | |
3074 | |
3075 * Makefile.in (mkdir): Ignore error from chmod. | |
3076 | |
3077 1993-11-15 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3078 | |
3079 * make-dist: Don't put lisp/forms.README in the distribution. | |
3080 | |
3081 1993-11-13 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3082 | |
3083 * configure.in (creating src/Makefile): Before running cpp, | |
3084 discard all lines that start with `# Generated' or /**/#. | |
3085 | |
3086 1993-11-11 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3087 | |
3088 * Version 19.20 released. | |
3089 | |
3090 * make-dist: Use build-ins.in, not build-install.in. | |
3091 Don't bother updating TAGS since it's not included. | |
3092 | |
3093 * build-ins.in: Renamed from build-install.in. | |
3094 | |
3095 1993-11-10 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3096 | |
3097 * make-dist: Don't try to link *.texinfo--there are none now. | |
3098 When running make in lib-src, specify YACC var value. | |
3099 | |
3100 1993-10-03 Roland McGrath (roland@churchy.gnu.ai.mit.edu) | |
3101 | |
3102 * configure.in (extrasub): Add vpath patterns for %.[yls]. | |
3103 | |
3104 * configure.in: Don't do seddery on config.status after AC_OUTPUT. | |
3105 Instead just include the commands to make src/Makefile as the | |
3106 second arg to AC_OUTPUT. | |
3107 | |
3108 * configure.in: Use : instead of dnl for comment inside | |
3109 $makefile_command. | |
3110 | |
3111 * configure.in: No longer use vpath_sed. Instead, when we notice | |
3112 srcdir already configured, set extrasub to hack vpath in the | |
3113 makefiles. | |
3114 | |
3115 * configure.in: In cmds to make src/Makefile, chmod Makefile.new | |
3116 before moving it. | |
3117 * Makefile.in (VPATH): Define to @srcdir@. | |
3118 | |
3119 1993-09-28 Brian Fox (bfox@cubit) | |
3120 | |
3121 * configure.in: Don't copy ${srcdir}/src/Makefile.in; that file | |
3122 doesn't exist. Just copy src/Makefile.in instead. Touch | |
3123 all of the Makefiles after editing config.status. | |
3124 | |
3125 * INSTALL: Update documentation to match new configuration | |
3126 mechanism. | |
3127 | |
3128 1993-09-27 Brian Fox (bfox@ai.mit.edu) | |
3129 | |
3130 * configure.in: Allow any of the path or directory Makefile | |
3131 variables to be set with flags to configure. Create all Makefiles | |
3132 at configure time. Edit special commands into config.status after | |
3133 src/Makefile.in is built from src/Makefile. | |
3134 | |
3135 * Makefile.in (src/Makefile, lib-src/Makefile, oldXMenu/Makefile): | |
3136 If these files are out of date, simply have config.status | |
3137 rebuild them; don't rebuild them explicitly. | |
3138 | |
3139 1993-09-25 Brian Fox (bfox@ai.mit.edu) | |
3140 | |
3141 * build-install.in: Change src/xemacs to src/emacs. We no longer | |
3142 create src/xemacs, so the file wouldn't be found. | |
3143 | |
3144 * make-dist: Remove `src/ymakefile', add `src/Makefile.in.in'. | |
3145 | |
3146 1993-09-24 Brian Fox (bfox@albert.gnu.ai.mit.edu) | |
3147 | |
3148 * configure.in: Avoid forcing the search of /usr/include before | |
3149 fixed include files by resetting C_SWITCH_X_SITE if it is | |
3150 "-I/usr/include". | |
3151 | |
3152 1993-09-20 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3153 | |
3154 * Makefile.in (@rip_paths@locallisppath): | |
3155 Delete ${datadir}/emacs/site-lisp. | |
3156 | |
3157 1993-09-15 Roland McGrath (roland@churchy.gnu.ai.mit.edu) | |
3158 | |
3159 * configure.in: | |
3160 Use AC_QUOTE_SQUOTE twice to properly quote vpath_sed value. | |
3161 Remove ${extra_output} from AC_OUTPUT call. | |
3162 | |
3163 1993-09-17 Brian Fox (bfox@inferno) | |
3164 | |
3165 * make-dist: Quote backquotes found in strings to be echoed. | |
3166 | |
3167 * configure.in: Use "sh -c pwd" when we want to avoid having the | |
3168 shell fix up the value of $PWD. | |
3169 | |
3170 1993-09-13 Brian Fox (bfox@inferno) | |
3171 | |
3172 * Makefile.in (do-install): Don't abort if ln or chmod at the end | |
3173 of the installation fail. Suggested by Karl Berry. | |
3174 | |
3175 1993-08-30 Brian Fox (bfox@inferno) | |
3176 | |
3177 * Makefile.in (*clean): Use "$(MAKE) $(MAKEFLAGS)" wherever "make" | |
3178 was used. Set MAKEFLAGS from MFLAGS. | |
3179 | |
3180 1993-09-16 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3181 | |
3182 * configure.in: Test for res_init in libc. | |
3183 | |
3184 1993-09-13 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3185 | |
3186 * configure.in: In the file ${tempcname}, use configure___ | |
3187 instead of @configure@. | |
3188 | |
3189 1993-09-12 Roland McGrath (roland@sugar-bombs.gnu.ai.mit.edu) | |
3190 | |
3191 * make-dist: Dist vpath.sed | |
3192 | |
3193 * Makefile.in (lib-src/Makefile, src/Makefile, oldXMenu/Makefile): | |
3194 Depend on vpath.sed. | |
3195 Replace sed comand for VPATH with @vpath_sed@. | |
3196 | |
3197 * configure.in: Substitute variable `vpath_sed'. | |
3198 If not in $srcdir and $srcdir is configured, | |
3199 issue warning that GNU make is required, | |
3200 and set vpath_sed to use vpath.sed script. | |
3201 | |
3202 1993-09-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu) | |
3203 | |
3204 * configure.in: Remove check for $srcdir being configured. This | |
3205 pretty much works now. | |
3206 Grok {m68*-hp,i[34]86-*}-netbsd* and set opsys=netbsd. | |
3207 Check for XFree86 (/usr/X386/include) independent of whether | |
3208 -lXbsd exists. | |
3209 | |
3210 * Makefile.in (info, dvi, clean, mostlyclean, distclean, | |
3211 realclean, unlock, relock): Use `$(MAKE)' in place of plain | |
3212 `make'. | |
3213 | |
3214 1993-08-14 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3215 | |
3216 * Version 19.19 released. | |
3217 | |
3218 * configure.in (i386-*-sunos4): Assume Sunos 4.0. | |
3219 | |
3220 1993-08-13 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3221 | |
3222 * configure.in: Check for XScreenNumberOfScreen. | |
3223 | |
3224 1993-08-12 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3225 | |
3226 * configure.in: Add * to end of all configuration alternatives. | |
3227 (m68*-sony-newsos3*): New alternative. | |
3228 | |
3229 1993-08-11 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3230 | |
3231 * make-dist: Include getdate.c in distribution. | |
3232 | |
3233 * configure.in: For --help, use $PAGER if it is set. | |
3234 (LIB_X11_LIB): Default to -lX11. | |
3235 (mips-sgi-irix5.*): New alternative. | |
3236 | |
3237 * Makefile.in (do-install): Install info/gnus* and info/sc*. | |
3238 | |
3239 * configure.in (m68*-hp-hpux*, hppa*-hp-hpux*): | |
3240 Recognize *.B8.* as hpux version 8. | |
3241 (m68*-tektronix-bsd*): Fix typo in tek4300. | |
3242 (AC_HAVE_FUNCS): Add ftime. | |
3243 | |
3244 1993-08-10 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3245 | |
3246 * configure.in (m88k-tektronix-sysv3*): Added the missing *. | |
3247 Use tekxd88, not tekXD88. | |
3248 | |
3249 1993-08-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu) | |
3250 | |
3251 * configure.in: Check for -lm. Then can check for frexp and logb. | |
3252 | |
3253 1993-08-08 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3254 | |
3255 * Version 19.18 released. | |
3256 | |
3257 * make-dist (src): Don't put gnu-hp300 in dist. | |
3258 (src, lisp): Include OChangeLog in dist. | |
3259 | |
3260 1993-08-08 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3261 | |
3262 * configure.in: Test for presence of logb and frexp functions. | |
3263 | |
3264 1993-08-05 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3265 | |
3266 * configure.in (machine): Add i370-ibm-aix*. | |
3267 | |
3268 1993-08-03 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3269 | |
3270 * configure.in (function checks): Test for mkdir and rmdir. | |
3271 | |
3272 * configure.in (function checks): Don't test for random and bcopy | |
3273 only when we're building with X; look for them all the time. | |
3274 | |
3275 1993-07-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3276 | |
3277 * configure.in: Test for availability of bcopy functions, searching | |
3278 the X libraries if we're using X. | |
3279 | |
3280 * configure.in: Test for the presence of/usr/lpp/X11/bin/smt.exp, | |
3281 and #define HAVE_AIX_SMT_EXP if we do. This is present in some | |
3282 versions of AIX, and needs to be passed to the loader. | |
3283 | |
3284 * configure.in: Test for the availablility of the | |
3285 XScreenResourceString function. | |
3286 | |
3287 1993-07-30 David J. MacKenzie (djm@frob.eng.umd.edu) | |
3288 | |
3289 * configure.in: If we found X on our own, set C_SWITCH_X_SITE and | |
3290 LD_SWITCH_X_SITE and assume --with-x11. | |
3291 Only look for X11 files if we weren't told about a window system | |
3292 or if we were told to use X11 but not told where. | |
3293 Search the libraries from the s and/or m files when checking for | |
3294 functions. | |
3295 | |
3296 * configure.in: Remove any trailing slashes in prefix and exec_prefix. | |
3297 | |
3298 1993-07-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3299 | |
3300 * make-dist: Include lisp/dired.todo in the distribution. | |
3301 | |
3302 1993-07-23 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3303 | |
3304 * configure.in: Add code to set HAVE_INET_SOCKETS. | |
3305 | |
3306 1993-07-21 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3307 | |
3308 * configure.in: If we do find x_includes and x_libraries | |
3309 via AC_FIND_X, set C_SWITCH_X_SITE and LD_SWITCH_X_SITE. | |
3310 | |
3311 1993-07-19 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3312 | |
3313 * make-dist: Include src/gnu-hp300 in the dist. | |
3314 | |
3315 * configure.in (canonical): New variable holds the canonicalized | |
3316 configuration. Don't alter `configuration'. Use `configuration' | |
3317 for Makefile.in for file naming. | |
3318 (testing x_includes and x_libraries): Use =, not ==. | |
3319 | |
3320 1993-07-17 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
3321 | |
3322 * Version 19.17 released. | |
3323 | |
3324 * Makefile.in (src/Makefile): Propagate C_SWITCH_SYSTEM to the src | |
3325 directory's makefile. This allows the invocation of CPP which | |
3326 builds xmakefile to receive these switches. The SunSoft C | |
3327 preprocessor inserts spaces between tokens if it doesn't get the | |
3328 -Xs flag requested in src/s/sol2.h. | |
3329 | |
3330 1993-07-12 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr) | |
3331 | |
3332 * configure.in (m68k-bull-sysv3): new config. | |
3333 | |
3334 1993-07-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3335 | |
3336 * configure.in: Use the autoconf AC_FIND_X macro to try to find | |
3337 the X Windows libraries. | |
3338 | |
3339 1993-07-07 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3340 | |
3341 * make-dist (tempdir): Don't create lisp/forms-mode directory in | |
3342 the distribution. Those files aren't kept in their own | |
3343 subdirectory any more. | |
3344 | |
3345 1993-07-06 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3346 | |
3347 * Version 19.16 released. | |
3348 | |
3349 1993-06-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3350 | |
3351 * configure.in: Add --verbose flag. | |
3352 | |
3353 1993-06-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3354 | |
3355 * version 19.15 released. | |
3356 | |
3357 1993-06-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3358 | |
3359 * Makefile.in (top_distclean): Use -f switch when cleaning out | |
3360 lock dir; it might be empty. | |
3361 | |
3362 * configure.in: Only check for -lXbsd once. | |
3363 | |
3364 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3365 | |
3366 * Version 19.14 released. | |
3367 | |
3368 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3369 | |
3370 * make-dist: If using gzip, create distribution with '.gz' extension. | |
3371 | |
3372 * make-dist (lisp/term): This doesn't have a ChangeLog anymore. | |
3373 (lisp/forms-mode): This doesn't exist anymore. | |
3374 | |
3375 * configure.in: Look for the closedir function. | |
3376 | |
3377 1993-06-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3378 | |
3379 * configure.in (CPP): Autoconf sets this to a shell variable | |
3380 reference, which doesn't work when it's edited into a makefile. | |
3381 Expand that variable reference. | |
3382 | |
3383 * Makefile.in (CPP): New variable. | |
3384 (src/Makefile): Edit CPP into src/Makefile. | |
3385 | |
3386 * Makefile.in (src/Makefile): Don't bother exiting single quotes | |
3387 and entering double quotes to get the values of LD_SWITCH_X_SITE | |
3388 and the other make variables; make substitutes them in anyway. | |
3389 | |
3390 * Makefile.in (uninstall): Don't remove the lisp and etc | |
3391 directories if they're in the source tree. | |
3392 | |
3393 Bring mumbleclean targets into conformance with GNU coding standards. | |
3394 * Makefile.in (mostlyclean, clean): Separate these two; just have | |
3395 them pass the request to the subdirectory makefiles. | |
3396 (distclean): Pass the request down, and then get rid of the | |
3397 files configure built, and get rid of the Makefiles. | |
3398 (realclean): Pass the request down, and then do the same things | |
3399 distclean does. | |
3400 (uninstall, info, dvi): New targets. | |
3401 | |
3402 * configure.in: Move clause for PC-compatible i386 box to the end | |
3403 of the case statement, to avoid masking configurations below. | |
3404 | |
3405 * configure.in: Add case for m88k-motorola-sysv4. | |
3406 | |
3407 * configure.in: Add support for HP/UX versions 7, 8, and 9 on | |
3408 the HP 68000 machines. | |
3409 | |
3410 * configure.in: Put the arguments to LD_SWITCH_X_SITE's and | |
3411 C_SWITCH_X_SITE's -L and -I switches in quotes, so the | |
3412 preprocessor won't fiddle with them. | |
3413 | |
3414 1993-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3415 | |
3416 * Makefile.in (TAGS): cd to src to run etags. | |
3417 | |
3418 1993-06-12 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3419 | |
3420 * configure.in (version): Check the X libraries for XrmSetDatabase | |
3421 and random, and see if we have -lXbsd. | |
3422 | |
3423 1993-06-11 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3424 | |
3425 * configure.in: Pass "-Isrc" to the CPP we run to examine the | |
3426 s/*.h and m/*.h files. Martin Tomes | |
3427 <mt00@controls.eurotherm.co.uk> says ISC Unix 3.0.1 needs it. | |
3428 | |
3429 1993-06-10 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3430 | |
3431 * configure.in: Move i386-prime-sysv* and i386-sequent-bsd* | |
3432 above the general i386 alternative. | |
3433 | |
3434 1993-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3435 | |
3436 * configure.in: Recognize configuration name for Data General | |
3437 AViiON machines. | |
3438 | |
3439 * configure.in: Use AC_LONG_FILE_NAMES. | |
3440 | |
3441 1993-06-09 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3442 | |
3443 * configure.in: Test for bison. | |
3444 * Makefile.in (YACC): New variable. | |
3445 (lib-src/Makefile.in): Edit YACC into the makefile. | |
3446 | |
3447 1993-06-08 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
3448 | |
3449 * Version 19.13 released. | |
3450 | |
3451 * configure.in (CFLAGS): Don't set this according to the value of | |
3452 the GCC shell variable. Instead, consult the machine and system | |
3453 files for the values of C_OPTIMIZE_SWITCH and C_DEBUG_SWITCH, and | |
3454 test __GNUC__ while we're at it. | |
3455 | |
3456 * configure.in: Remove extra ;; from hpux cases. | |
3457 | |
3458 1993-06-07 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
3459 | |
3460 * configure.in: Check to see if the system has -ldnet. | |
3461 | |
3462 1993-06-08 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3463 | |
3464 * make-dist: Add clauses to distribute lisp/forms-mode. | |
3465 | |
3466 1993-06-07 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3467 | |
3468 * configure.in (machine): Fix the versions in hpux version number test. | |
3469 Do not guess based on cpu type. Do check for explicit system version. | |
3470 | |
3471 1993-06-03 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3472 | |
3473 * configure.in: Do NOT look for `unknown' as company name. | |
3474 | |
3475 1993-06-02 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3476 | |
3477 * configure.in: Fix typo in message. | |
3478 | |
3479 1993-06-01 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3480 | |
3481 * Version 19.12 released. | |
3482 | |
3483 * Makefile.in (do-install): Correct previous etc-copying change. | |
3484 Partially rewrite using `if'. | |
3485 (src/Makefile): Insert --x-libraries option into LD_SWITCH_X_SITE. | |
3486 | |
3487 * Version 19.11 released. | |
3488 | |
3489 * configure.in: Handle 386bsd. | |
3490 | |
3491 1993-05-31 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3492 | |
3493 * make-dist: Update getdate.c. | |
3494 | |
3495 * configure.in: Handle bsd386. | |
3496 | |
3497 * Makefile.in (do-install): Use `-' in tar options. | |
3498 | |
3499 * configure.in: Change ! "${...}" to x"${...}" = x. | |
3500 | |
3501 * Makefile.in (do-install): Copy the DOC-* files from the build | |
3502 etc directory, as well as lots of things from ${srcdir}/etc. | |
3503 | |
3504 * make-dist: Copy config.guess. | |
3505 | |
3506 * configure.in: Handle AIX versions 1.2, 1.3. | |
3507 | |
3508 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3509 | |
3510 * configure.in: Use s/bsd4-3.h for mips-mips-riscos4, and add | |
3511 the configuration name mips-mips-usg* to represent USG systems. | |
3512 | |
3513 * configure.in: Fix logic to detect if srcdir is already configured. | |
3514 | |
3515 * Makefile.in: Pass in LD_SWITCH_X_SITE. | |
3516 | |
3517 * Makefile.in (mkdir, clean, mostlyclean, do-install): Use `(cd | |
3518 foo && pwd)` instead of `(cd foo ; pwd)` to get the canonical name | |
3519 of a directory; cd might fail, and have pwd print out the current | |
3520 directory. | |
3521 | |
3522 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3523 | |
3524 * configure.in: When looking for sources, use '.', not `.`. Also '..'. | |
3525 | |
3526 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3527 | |
3528 * configure.in: Complain if srcdir points at an already-configured | |
3529 tree. | |
3530 | |
3531 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3532 | |
3533 * Version 19.10 released. | |
3534 | |
3535 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3536 | |
3537 * Makefile.in: Use Makefile comments, not C comments. | |
3538 | |
3539 * configure.in: Add case for the Tektronix XD88. | |
3540 | |
3541 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3542 | |
3543 * configure.in: Handle sysv4.2 and sysvr4.2. | |
3544 | |
3545 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3546 | |
3547 * configure.in: Traverse the argument list without destroying it; | |
3548 don't use shift. It turns out that "set - ${saved_arguments}" | |
3549 doesn't work portably. | |
3550 | |
3551 * configure.in: Add missing "fi". | |
3552 | |
3553 * make-dist: Rebuild configure if configure.in is newer. | |
3554 | |
3555 * Makefile.in (src:, lib-src:, FRC:): force the src and lib-src | |
3556 targets to be executed even if make remembers that it has already | |
3557 stisfied FRC. | |
3558 | |
3559 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3560 | |
3561 * Makefile.in (do-install): Delete redundant code to copy etc twice. | |
3562 | |
3563 * configure.in (romp): Handle various version numbers with aos and bsd. | |
3564 | |
3565 1993-05-28 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3566 | |
3567 * configure.in: Fix message text. | |
3568 | |
3569 1993-05-28 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3570 | |
3571 * make-dist: Make a `site-lisp' directory in the distribution, | |
3572 instead of a `local-lisp' directory, which hasn't been the | |
3573 appropriate name for a long time. | |
3574 * Makefile.in (@rip_paths@locallisppath): Use site-lisp directory | |
3575 from the distribution first, then /usr/local/lib/emacs/site-lisp. | |
3576 | |
3577 * Makefile.in (do-install): Correctly detect if ./etc and | |
3578 ${srcdir}/etc are the same. | |
3579 | |
3580 * configure.in: Extract UNEXEC from the system configuration | |
3581 files, compute the name of the source file corresponding to the | |
3582 object file, and #define it as UNEXEC_SRC in config.h. | |
3583 | |
3584 * configure.in: If srcdir is '.', then try using PWD to make it | |
3585 absolute. | |
3586 | |
3587 * configure.in: Include ${srcdir} in the printed report, to help | |
3588 people notice if it's an automounter path. | |
3589 | |
3590 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3591 | |
3592 * configure.in (prefix): Don't run pwd on srcdir unnecessarily. | |
3593 | |
3594 1993-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3595 | |
3596 * Makefile.in (do-install): Delete the dest dir, not the source dir, | |
3597 when they are different. Add `shift' command. | |
3598 (COPYDESTS, COPYDIR): Delete external-lisp dir. | |
3599 (externallispdir): Var deleted. | |
3600 | |
3601 * configure.in: Delete spurious paren outputting short_usage. | |
3602 | |
3603 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3604 | |
3605 * Version 19.9 released. | |
3606 | |
3607 1993-05-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3608 | |
3609 * Makefile.in (${SUBDIR}): Pass the value of the make variable to | |
3610 subdirectory makes. | |
3611 | |
3612 * make-dist: Check for .elc files with no corresponding .el file. | |
3613 | |
3614 * Makefile.in (mkdir): Make all the directories in locallisppath. | |
3615 | |
3616 * config.guess: New file. | |
3617 * configure.in: Use it, tentatively. | |
3618 * INSTNALL: Mention its usage. | |
3619 | |
3620 * configure.in (hppa-hp-hpux): Use uname -r instead of uname -m; | |
3621 the former gives you the operating system rev directly. Use | |
3622 s/hpux.h if we don't recognize what we got. | |
3623 | |
3624 * Makefile.in (do-install): Don't remove a destination directory | |
3625 if it's the same as the source. If ${srcdir}/info == ${infodir}, | |
3626 don't try to copy the info files. | |
3627 | |
3628 * Makefile.in (COPYDIR, COPYDESTS): Don't mention etc twice; this | |
3629 doesn't work if you're not using a separate source directory. | |
3630 (do-install): Copy the build tree's etc directory only after | |
3631 making sure it's not also the source tree's etc directory. | |
3632 | |
3633 1993-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3634 | |
3635 * configure.in: Handle sunos4.1.3 specially. | |
3636 | |
3637 1993-05-25 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3638 | |
3639 * Makefile.in (INSTALL): Add definition. | |
3640 | |
3641 * configure.in: Fix some messages. Support -with-gnu-cc. | |
3642 At the end, use `set --', not `set -'. | |
3643 Delete spurious `.h' in hpux alternatives. | |
3644 | |
3645 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3646 | |
3647 * Version 19.8 released. | |
3648 | |
3649 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3650 | |
3651 * configure.in: When looking for source in the same directory as | |
3652 the configure script, make the path thus discovered absolute. | |
3653 If the user specifies the `--srcdir' switch, make that directory | |
3654 absolute too. | |
3655 | |
3656 * Makefile.in (srcdir): Remove comment saying this doesn't work. | |
3657 | |
3658 * Makefile.in (src/paths.h): Edit the `infodir' variable into this | |
3659 too, as the value of the PATH_INFO macro. | |
3660 | |
3661 * configure.in: Check to see if the source lives in the same | |
3662 directory as the configure script. | |
3663 | |
3664 1993-05-24 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3665 | |
3666 * Makefile.in (install): Split this into `install' and | |
3667 `do-install', to give people more control over exactly what gets | |
3668 done. | |
3669 (do-install): New target, containing the guts of `install'. Don't | |
3670 remove and recreate the directories inside the copying loop - do | |
3671 it all before the copying loop. Pass more flags to the lib-src | |
3672 make. | |
3673 (mkdir): Create ${infodir}, ${mandir}, and ${sitelispdir} here, to | |
3674 avoid errors and warnings. | |
3675 | |
3676 * configure.in: For generic IBM PC boxes, insist on "unknown" for | |
3677 the manufacturer - the more general case was blocking other i386 | |
3678 configuration names below, and that's how the names are written in | |
3679 MACHINES anyway. | |
3680 | |
3681 * make-dist: When breaking links, remove the link before moving | |
3682 the copy onto it, to avoid interactive behavior. | |
3683 | |
3684 * Makefile.in: Doc fix. | |
3685 | |
3686 * configure.in: Doc fix. | |
3687 | |
3688 * INSTALL: Mention --exec-prefix option. | |
3689 | |
3690 * configure.in: Add support for the `--exec-prefix' option. | |
3691 * Makefile.in: Accept that support. | |
3692 | |
3693 * configure.in: Use the AC_PROG_INSTALL macro. | |
3694 * Makefile.in (INSTALL): Variable removed. | |
3695 (INSTALL_PROGRAM, INSTALL_DATA): Accept these values from configure. | |
3696 | |
3697 * configure.in: Distinguish between hp800's and hp700's by calling | |
3698 "uname -m". | |
3699 | |
3700 1993-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3701 | |
3702 * configure.in: Recognize configuration names for i860 boxes | |
3703 running SYSV. | |
3704 | |
3705 1993-05-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3706 | |
3707 * configure.in: Distinguish between hp800's and hp700's by the | |
3708 version of HP/UX they run, since that's something people are more | |
3709 likely to know - hp700's run 8.0. | |
3710 Add HP 700 configuration. | |
3711 | |
3712 * configure.in: Test for the presence of the `rename' function. | |
3713 | |
3714 * Makefile.in (C_SWITCH_X_SITE): New variable - get this from | |
3715 configure.in. | |
3716 (oldXMenu/Makefile): Edit C_SWITCH_X_SITE into this. | |
3717 | |
3718 * make-dist: Break intra-tree links. | |
3719 | |
3720 * configure.in: Explain that this is an autoconf script, and give | |
3721 instructions for rebuilding configure from it. Arrange to put | |
3722 comments in configure explaining this too. | |
3723 | |
3724 * configure.in: Make the first line of the configure script be | |
3725 "#!/bin/sh". Leaving the first line blank didn't work. | |
3726 | |
3727 * configure.in (long_usage): Removed; made short_usage describe | |
3728 the options briefly. | |
3729 | |
3730 * configure.in: Implement the --prefix option. | |
3731 * Makefile.in (prefix): Add support for it here. | |
3732 * INSTALL: Document it here. | |
3733 | |
3734 * Makefile.in (install): Don't assume that the files in the `info' | |
3735 subdirectory match *.info. They don't have that prefix. | |
3736 | |
3737 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3738 | |
3739 * configure.in: Add case for version 5 of Esix. | |
3740 | |
3741 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3742 | |
3743 * Version 19.7 released. | |
3744 | |
3745 * make-dist: There aren't any *.com files in lib-src anymore. | |
3746 | |
3747 * make-dist: Copy texinfo.tex and texindex.c, rather than linking | |
3748 them; they're symlinks to other filesystems on the GNU machines. | |
3749 | |
3750 * make-dist: Check that the manual reflects the same version of | |
3751 Emacs as stated in lisp/version.el. Edit that version number into | |
3752 the README file. | |
3753 | |
3754 1993-05-21 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3755 | |
3756 * configure.in: Remove the hack of AC_DEFINE; use | |
3757 AC_DEFINE_UNQUOTED. | |
3758 | |
3759 1993-05-20 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3760 | |
3761 * make-dist: Don't distribute precomp.com, compile.com, or | |
3762 link.com from ./src; they're in ./vms now. | |
3763 | |
3764 Some time-handling patches from Paul Eggert: | |
3765 * configure.in: Add AC_TIMEZONE. | |
3766 | |
3767 1993-05-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3768 | |
3769 * configure.in: Recognize Linux as a valid operating system for | |
3770 the i386. | |
3771 | |
3772 1993-05-18 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
3773 | |
3774 * make-dist: Distribute some VMS files we got from Richard Levitte. | |
3775 | |
3776 * Makefile.in (oldXMenu/Makefile): Take oldXMenu/Makefile.in as | |
3777 the source for the sed command, not oldXMenu/Makefile. | |
3778 | |
3779 1993-05-17 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
3780 | |
3781 * INSTALL: Don't claim the srcdir option doesn't work. | |
3782 | |
3783 1993-05-16 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
3784 | |
3785 * configure.in: Include remarks saying what order the autoconf | |
3786 tests should go in, and remind people to change config.h.in | |
3787 whenever they add autoconf tests which make #definitions. | |
3788 | |
3789 * make-dist: Distribute oldXMenu/Makefile.in, not oldXMenu/Makefile. | |
3790 | |
3791 1993-05-15 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3792 | |
3793 * Makefile.in (oldXMenu/Makefile): Make this depend on | |
3794 ${srcdir}/oldXMenu/Makefile.in, not itself. | |
3795 | |
3796 * PROBLEMS: Some updates from David J. Mackenzie. | |
3797 | |
3798 More changes from David J. Mackenzie. | |
3799 * Makefile.in (install.sysv, install.xenix, install.aix): Targets | |
3800 removed; autoconf and config.h should specify all these | |
3801 differences. | |
3802 (buildlisppath): Make this path depend on ${srcdir}. | |
3803 (INSTALLFLAGS): Removed. | |
3804 (INSTALL): Include the -c flag. | |
3805 (install): Change the way we invoke install accordingly. | |
3806 | |
3807 Install ${srcdir} changes from DJM. | |
3808 * Makefile.in (SUBDIR_MAKEFILES): Add oldXMenu/Makefile to this | |
3809 list. | |
3810 (COPYDIR, COPYDESTS): Install files from both the etc directory in | |
3811 the source tree and the etc directory in the object tree. | |
3812 (${SUBDIR}): Pass the prefix variable down to submakes. | |
3813 (everywhere): Use `sed', not `/bin/sed'. Not all systems have sed | |
3814 in /bin. | |
3815 (lib-src/Makefile, src/Makefile, oldXMenu/Makefile): Edit in | |
3816 values for srcdir and VPATH. | |
3817 (install): Add `v' flag to tar command. Make sure that `dir' | |
3818 exists in ${srcdir}/info before copying it. Remember that the man | |
3819 pages come from the source tree, not the object tree. | |
3820 * configure.in: Remove remarks saying that the --srcdir option | |
3821 doesn't work. | |
3822 Create the etc directory in the object tree. | |
3823 Recognize configuration names of the form *-sun-solaris*. | |
3824 Recognize sunos5 and solaris as operating system names. | |
3825 | |
3826 * configure.in: Use the AC_TIME_WITH_SYS_TIME macro, for | |
3827 lib-src/getdate.y and src/systime.h. | |
3828 | |
3829 1993-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3830 | |
3831 * make-dist: Make links in info subdir. | |
3832 | |
3833 1993-05-13 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
3834 | |
3835 * configure.in: Call AC_STDC_HEADERS. | |
3836 | |
3837 1993-05-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3838 | |
3839 * configure.in: Sidestep autoconf's quoting of the second argument | |
3840 of AC_DEFINE, so we can specify the value to put there. It would | |
3841 be nice if autoconf provided some way to specify computed values | |
3842 for macros. | |
3843 | |
3844 1993-05-09 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
3845 | |
3846 * Makefile.in (DEFS): Deleted; since we're using AC_CONFIG_HEADER, | |
3847 this is always just -DHAVE_CONFIG_H. | |
3848 | |
3849 The GNU coding standards specify that CFLAGS should be left for | |
3850 users to set. | |
3851 * Makefile.in (CFLAGS): Let configure determine the default value | |
3852 for this. Don't | |
3853 have it default to DEFS. | |
3854 (${SUBDIR}): Pass CFLAGS down to submakes, not DEFS. | |
3855 (lib-src/Makefile, src/Makefile): Edit the default value for | |
3856 CFLAGS into these files, not DEFS. | |
3857 * configure.in (CFLAGS): Choose a default value for this - "-g" | |
3858 normally, or "-g -O" if we're using GCC. Edit it into the | |
3859 top-level Makefile. | |
3860 | |
3861 * configure.in: When scanning the machine and system description | |
3862 #include files, write their names to conftest.c properly. | |
3863 | |
3864 1993-05-07 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
3865 | |
3866 * configure.in: In configuration name case for Apallos running | |
3867 Domainios, set opsys, not opsysfile. | |
3868 | |
3869 * configure.in: Use the autoconf AC_CONFIG_HEADER macro to produce | |
3870 src/config.h, instead of AC_OUTPUT; the latter overwrites | |
3871 src/config.h even when it hasn't changed, puts a makefile-style | |
3872 comment at the top even though it's C code, and produces a | |
3873 config.status script which doesn't do the job right. | |
3874 | |
3875 * configure.in: Add AC_LN_S test, so we can tell whether or not we | |
3876 can use a symbolic link to get the X Menu library into src. | |
3877 * Makefile.in (LN_S): New variable. | |
3878 (src/Makefile): Edit the value of LN_S into this makefile. | |
3879 | |
3880 1993-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
3881 | |
3882 * configure.in: Support *-sco3.2v4* as opsystem. | |
3883 | |
3884 * make-dist: Don't include calc directory. | |
3885 Exclude many files in the man directory; copy a few. | |
3886 | |
3887 1993-05-04 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3888 | |
3889 * configure.in: Use AC_HAVE_HEADERS to test for sys/time.h, and | |
3890 call AC_STRUCT_TM to see what's in time.h. | |
3891 | |
3892 * configure.in: Employ quoting stupidity to get the value of CPP | |
3893 to expand properly. | |
3894 | |
3895 1993-04-27 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
3896 | |
3897 * configure.in: Use the AC_PROG_CPP macro, and then use the CPP | |
3898 variable to scan the machine and system description files. | |
3899 | |
3900 * configure.in: Use the AC_HAVE_HEADERS to check for sys/timeb.h, | |
3901 so that getdate.y builds correctly. | |
3902 | |
3903 1993-04-26 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
3904 | |
3905 * configure.in (tempcname): Change this to "conftest.c", so it will | |
3906 work properly on systems with short filenames; this is the name | |
3907 autoconf uses. | |
3908 | |
3909 * configure.in: Also detect the availability of dup2 and | |
3910 gethostname. | |
3911 | |
3912 * configure.in: Use the AC_ALLOCA test. | |
3913 * Makefile.in (ALLOCA): New variable, to be set by ./configure. | |
3914 (lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile. | |
3915 | |
3916 1993-04-24 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
3917 | |
3918 * make-dist: Distribute configure, as well as configure.in. | |
3919 Oversight. | |
3920 | |
3921 1993-04-23 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
3922 | |
3923 * Makefile.in (install): Print out the name of the directory we're | |
3924 copying, so people can have some idea of whether we're making | |
3925 progress. | |
3926 | |
3927 * Makefile.in (install.aix, install.xenix, install.sysv, install): | |
3928 Don't forget to re-create the COPYDESTS directories after we clear | |
3929 them out. | |
3930 | |
3931 1993-04-13 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
3932 | |
3933 * Makefile.in: Add autoconf cookies so that the configure | |
3934 script can comment out sections of path variable definitions to | |
3935 choose between the installable configuration and the run-in-place | |
3936 configuration. | |
3937 * configure.in: Add new option `--run-in-place', to select the | |
3938 run-in-place path definitions. | |
3939 | |
3940 * configure.in: Add a clause to the big configuration name case | |
3941 for the NeXT machine. | |
3942 | |
3943 1993-04-12 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
3944 | |
3945 * Makefile.in (install, install.sysv, install.xenix, install.aix): | |
3946 Make sure that each source directory exists, and is different from | |
3947 the destination directory; then, delete the destination before | |
3948 copying over the source. | |
3949 | |
3950 * make-dist: Distribute configure.in, instead of configure. | |
3951 | |
3952 1993-04-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
3953 | |
3954 * configure.in: Don't set CC to "gcc -O" if the user specifies | |
3955 `--with-gcc'. Add -O to DEFS if GCC is set. | |
3956 | |
3957 1993-04-09 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
3958 | |
3959 * Makefile.in (clean mostlyclean): Missing right paren. | |
3960 | |
3961 * configure.in: When checking for X windows, search for an X11 | |
3962 subdirectory of ${x_includes}. | |
3963 | |
3964 * configure.in: Check for gettimeofday function, for getdate.y. | |
3965 | |
3966 Change `configure' to a mixture of custom code and autoconf stuff. | |
3967 autoconf can't derive all the information we need, but we'd really | |
3968 like to be able to take advantage of some of its tests, and its | |
3969 file-editing facilities. | |
3970 * configure.in: Renamed from configure. | |
3971 Quote the sections of shell script we want copied literally to | |
3972 the configure script. | |
3973 (compile): Initialize this to make the autoconf macros' code happy. | |
3974 Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out | |
3975 code to do their jobs. | |
3976 Use autoconf to produce Makefile and src/config.h. | |
3977 Remove the Makefile-style comment that autoconf places at the top | |
3978 of src/config.h. | |
3979 (config_h_opts): Removed - no longer necessary. | |
3980 * Makefile.in (configname): Renamed to configuration. | |
3981 (CONFIG_CFLAGS): Renamed to DEFS. | |
3982 (CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to | |
3983 get values via autoload @cookies@. | |
3984 (libsrc_libs): Get this from autoconf. We used to do nothing | |
3985 about this. | |
3986 (${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS. | |
3987 | |
3988 * Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't | |
3989 echo the move-if-change command. | |
3990 | |
3991 1993-04-08 Jim Blandy (jimb@churchy.gnu.ai.mit.edu) | |
3992 | |
3993 * make-dist: Distribute lib-src/rcs-checkin. | |
3994 | |
3995 * make-dist: It's oldXMenu/compile.com, not oldXMenu/compile.mms. | |
3996 Don't try to make links to the RCS or Old subdirectories. | |
3997 Use the appropriate extension for the compression type in use. | |
3998 Create the tar file in the shell's initial default directory, not | |
3999 in ${tempparent}. | |
4000 Erase the whole ${tempparent} tree, not just ${tempdir}. | |
4001 | |
4002 1993-03-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
4003 | |
4004 * Makefile.in (src/paths.h): Don't echo the huge sed command we | |
4005 use to build paths.h. | |
4006 (lib-src/Makefile, src/Makefile): Similarly. | |
4007 | |
4008 * configure: Extend test for working `const' keyword to handle AIX | |
4009 3.2 cc. | |
4010 | |
4011 1993-03-24 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
4012 | |
4013 * make-dist: Distribute lisp/term/ChangeLog. | |
4014 | |
4015 Arrange for C compilation throughout the tree to get | |
4016 C_SWITCH_SYSTEM from the configuration files. | |
4017 * configure: Extract C_SWITCH_SYSTEM from the machine and | |
4018 system-dependent files, and save it in the top-level Makefile. | |
4019 * Makefile.in (C_SWITCH_SYSTEM): New flag for configure to edit. | |
4020 (lib-src/Makefile): Edit C_SWITCH_SYSTEM into lib-src/Makefile. | |
4021 | |
4022 * make-dist: Include the VMS support files in oldXMenu in the | |
4023 distribution. | |
4024 | |
4025 * configure: Doc fix. | |
4026 | |
4027 * configure: Fix corrupted config_h_opts. | |
4028 | |
4029 * configure: Properly report option names in error messages. | |
4030 | |
4031 * configure: Properly recognize --x-includes and --x-libraries | |
4032 options. | |
4033 | |
4034 * configure: Fix syntax errors in code handling XFree386. | |
4035 | |
4036 1993-03-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
4037 | |
4038 * configure: Add special code to detect XFree386, and tell | |
4039 config.h about it. | |
4040 | |
4041 * configure: Properly handle extracting values of LIBS_MACHINE and | |
4042 LIBS_SYSTEM that contain spaces. | |
4043 | |
4044 * configure: Add `--x-includes' and `--x-libraries' options. I | |
4045 think these are dopey, but no less than three alpha testers, at | |
4046 large sites, have said they have their X files installed in odd | |
4047 places. Implement them by setting C_SWITCH_X_SITE and | |
4048 LD_SWITCH_X_SITE in src/config.h. | |
4049 | |
4050 1993-03-22 Eric S. Raymond (eric@geech.gnu.ai.mit.edu) | |
4051 | |
4052 * make-dist: Don't distribute etc/Old files. | |
4053 | |
4054 * GETTING.GNU.SOFTWARE, PROBLEMS: Registered into RCS with their | |
4055 backups. | |
4056 | |
4057 1993-03-20 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
4058 | |
4059 * make-dist: Fix typo. | |
4060 | |
4061 1993-03-19 Eric S. Raymond (eric@geech.gnu.ai.mit.edu) | |
4062 | |
4063 * make-dist: Corrected typo, fixed it to discard = and TAGS files | |
4064 in some cases where it should but didn't seen to. | |
4065 | |
4066 * Makefile.in: Added unlock and relock productions. | |
4067 | |
4068 1993-03-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
4069 | |
4070 * make-dist: Add a --compress option to force make-dist to use | |
4071 compress. | |
4072 | |
4073 * make-dist: Use gzip, if we can find it. | |
4074 | |
4075 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and | |
4076 make rs6000-ibm-aix default to -aix32. | |
4077 | |
4078 1993-03-17 Eric S. Raymond (eric@geech.gnu.ai.mit.edu) | |
4079 | |
4080 * Makefile.in: Added `Developer's configuration' section. | |
4081 | |
4082 1993-03-17 Eric S. Raymond (eric@mole.gnu.ai.mit.edu) | |
4083 | |
4084 * Makefile.in: Add commented-out variable settings for developer's | |
4085 configuration. | |
4086 | |
4087 1993-03-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
4088 | |
4089 * make-dist: Distribute `src/bitmaps' too. | |
4090 | |
4091 1993-03-14 Charles Hannum (mycroft@hal.gnu.ai.mit.edu) | |
4092 | |
4093 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and | |
4094 make rs6000-ibm-aix default to -aix32. | |
4095 | |
4096 1993-03-09 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
4097 | |
4098 * configure: Recognize strings like "sysvr0" or "sysvr1" as System V. | |
4099 | |
4100 * Makefile.in (install.sysv): Add a second `$' in front of | |
4101 `${dest}', so that the shell will expand it, instead of Make. | |
4102 | |
4103 * configure: When processing the name of the configure script, | |
4104 collapse `././' to `./', but leave a single `./' prefix alone. | |
4105 | |
4106 * configure: Doc fix. | |
4107 | |
4108 1993-03-04 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
4109 | |
4110 * configure: Handle isc3.0 correctly. | |
4111 | |
4112 1993-02-25 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
4113 | |
4114 * make-dist: Don't try to copy the COPYING notice into | |
4115 external-lisp; we're not distributing that directory any more. | |
4116 | |
4117 1993-02-24 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
4118 | |
4119 * Makefile.in (install, install.aix, install.xenix, install.sysv): | |
4120 Remove CVS subdirectories from the installed directory trees, as | |
4121 well as RCS directories. | |
4122 | |
4123 1993-02-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
4124 | |
4125 * make-dist: Only copy gmalloc.c if we couldn't link it. | |
4126 Don't try to copy man/{README,Makefile} unless they actually exist. | |
4127 | |
4128 * Makefile.in (lisppath): Don't include externallispdir in this. | |
4129 We're not sure whether we're even going to distribute the | |
4130 directory yet. | |
4131 | |
4132 1993-02-17 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
4133 | |
4134 * make-dist: Don't distribute the external-lisp directory anymore. | |
4135 * INSTALL: Remove all references to external-lisp. | |
4136 | |
4137 * configure: Detect whether the compiler supports `const' | |
4138 properly, and edit src/config.h accordingly. | |
4139 | |
4140 * configure: Tweak layout of final report. | |
4141 | |
4142 * Makefile.in (${SUBDIR}): Pass CONFIG_CFLAGS to the submakes, not | |
4143 CFLAGS. | |
4144 | |
4145 * Makefile.in (locallisppath): Make this default to | |
4146 ${datadir}/emacs/site-lisp, instead of | |
4147 ${datadir}/emacs/local-lisp. ${datadir} and ${statedir} are often | |
4148 the same thing, and local-lisp causes completion conflicts with | |
4149 lock. | |
4150 (lisppath): Add ${externallispdir} to this. | |
4151 * INSTALL: Adjust installation directions. | |
4152 | |
4153 * Makefile.in (externallispdir): New variable, to say where to | |
4154 install the externally-maintained lisp files. | |
4155 (COPYDIR, COPYDESTS): Copy the external lisp directory just like | |
4156 the others. | |
4157 * INSTALL: Describe external-lisp and the new externallispdir | |
4158 variable. | |
4159 | |
4160 1993-02-14 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
4161 | |
4162 * configure (progname): New option `--with-gcc'. Make it clearer | |
4163 how we are trying to guess whether or not we have GCC. | |
4164 * INSTALL: Document the `--with-gcc' option, and improve | |
4165 description of `--with-x' options. | |
4166 | |
4167 1993-02-06 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
4168 | |
4169 * Makefile.in (COPYDIR, COPYDESTS): Remove ${srcdir}/info and | |
4170 ${infodir} from these variables; we have written out explicit code | |
4171 to install the info files. | |
4172 | |
4173 1993-01-25 Jim Blandy (jimb@geech.gnu.ai.mit.edu) | |
4174 | |
4175 * make-dist: Don't distributed the RCS files in the etc directory. | |
4176 | |
4177 1993-01-24 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
4178 | |
4179 * Makefile.in: Some makes can't handle comments in the middle of | |
4180 commands; move them to before the whole rule. | |
4181 | |
4182 1993-01-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
4183 | |
4184 * README: Mention what Emacs is. | |
4185 | |
4186 1993-01-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
4187 | |
4188 * make-dist: Include `./lisp/calc-2.02' in the distribution. | |
4189 Add `./cpp' and `./man' back into the distribution. | |
4190 | |
4191 1993-01-13 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
4192 | |
4193 * Makefile.in: Define MAKE, and use where appropriate. | |
4194 | |
4195 1993-01-07 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
4196 | |
4197 * make-dist: Remember that the authoritative COPYING notice is | |
4198 `etc/COPYING', not `../etc/COPYING'. | |
4199 | |
4200 1992-12-20 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
4201 | |
4202 * make-dist: Make sure that the COPYING notices in each directory | |
4203 are copies, not symlinks. | |
4204 | |
4205 1992-12-19 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
4206 | |
4207 * INSTALL: The build process produces an executable called `emacs' | |
4208 now. Change references. | |
4209 * Makefile.in: Adjust `install.mumble' targets to install | |
4210 `src/emacs', not `src/xemacs'. | |
4211 | |
4212 * configure: Start with a blank line; this keeps some old CSH's | |
4213 from thinking it's a CSH script. Most systems will just use | |
4214 /bin/sh to run it, which is what we're expecting; the only other | |
4215 shells which might try to interpret it themselves are probably | |
4216 Bourne-compatible. | |
4217 | |
4218 1992-12-14 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
4219 | |
4220 * INSTALL: Improvements suggested by David Mackenzie. | |
4221 | |
4222 1992-12-12 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
4223 | |
4224 * Makefile.in (install, install.sysv, install.xenix, install.aix): | |
4225 Don't try to copy the info files if there aren't any; the | |
4226 unexpanded globbing pattern disappoints `install'. Ignore the | |
4227 return status of that command. | |
4228 | |
4229 * INSTALL: Updated for new configuration arrangement. | |
4230 | |
4231 * configure: Don't make the top-level Makefile read-only - people | |
4232 may want to edit the values of the path variables. | |
4233 | |
4234 * Makefile.in (install, install.sysv, install.xenix, install.aix): | |
4235 Install the info files in ${infodir}. Install the executable | |
4236 under both `emacs' and `emacs-VERSION'. | |
4237 | |
4238 * Makefile.in: Doc fix. | |
4239 | |
4240 * Makefile.in (exec_prefix): New variable, as per latest version | |
4241 of coding standards. | |
4242 (bindir, libdir): Use it, instead of `prefix'. | |
4243 (lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile. | |
4244 | |
4245 * Makefile.in (mandir): Make the default value for this depend on | |
4246 $(prefix). | |
4247 | |
4248 * Makefile.in (datadir, statedir, libdir): Make these all default | |
4249 to ${prefix}/lib. | |
4250 (lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted | |
4251 to compensate. | |
4252 | |
4253 * Makefile.in (install, install.sysv, install.xenix, install.aix): | |
4254 Install the etags and ctags man pages too. | |
4255 | |
4256 * Makefile.in (distclean): Don't delete backup files; that's the | |
4257 job of extraclean. | |
4258 (extraclean): Like distclean, but deletes backup and autosave files. | |
4259 | |
4260 1992-12-10 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
4261 | |
4262 Make path specification conform to GNU coding standards. | |
4263 * configure (long_usage): Remove all traces of old arguments from | |
4264 usage messages, and document the options we do accept in more | |
4265 detail: -with-x... and --srcdir. | |
4266 (options, boolean_opts): Deleted; we don't have enough options to | |
4267 make this worthwhile. | |
4268 (prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted, | |
4269 along with the code which supported them; these should be set as | |
4270 arguments to the top-level make. | |
4271 (config_h_opts): Since this no longer doubles as a list of option | |
4272 names, make them upper case; this simplifies the code which uses | |
4273 them to build the sed command to edit src/config.h. Change the | |
4274 code which sets them. | |
4275 (cc, g, O): Don't allow the user to set these using options; they | |
4276 should be specified using `CC=' and `CFLAGS=' arguments to the | |
4277 top-level make. Just choose reasonable default values for them, | |
4278 and edit them into Makefile.in's default CC and CONFIG_CFLAGS | |
4279 values. | |
4280 (gnu_malloc, rel_alloc): Don't allow the user to set these using | |
4281 options; use them whenever the configuration files say they're | |
4282 possible. | |
4283 Simplify the argument processing loop. Don't accept abbreviations | |
4284 for option names; these might conflict with other configuration | |
4285 options in the future. | |
4286 Add some support for the `--srcdir' option. Check for the sources | |
4287 in . and .. if `--srcdir' is omitted. If the directories we will | |
4288 compile in don't exist yet, create them under the current directory. | |
4289 Note that the rest of the build process doesn't really support | |
4290 this. | |
4291 Edit only the top Makefile. That should edit the others. Edit | |
4292 into the makefile: `version', from lisp/version.el, `configname' | |
4293 and `srcdir' from the configuration arguments, `CC' and | |
4294 `CONFIG_CFLAGS' as guessed from the presence or absence of GCC in | |
4295 the user's path, and LOADLIBES as gleaned from the system | |
4296 description files. | |
4297 Simplify the report generated; it doesn't need to include any | |
4298 description of paths now. | |
4299 Make `config.status' exec configure instead of just calling it, so | |
4300 there's no harm in overwriting `config.status'. | |
4301 * Makefile.in (version, configname): New variables, used to choose | |
4302 the default values for datadir and libdir. | |
4303 Path variables rearranged into two clearer groups: | |
4304 - In the first group are the variables specified by the GNU coding | |
4305 standards (prefix, bindir, datadir, statedir, libdir, mandir, | |
4306 manext, infodir, and srcdir). | |
4307 - In the second are the variables actually used for Emacs's paths | |
4308 (lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir, | |
4309 archlibdir), which depend on the first category. | |
4310 datadir and libdir default to directories under | |
4311 ${prefix}/lib/emacs instead of ${prefix}/emacs, by popular | |
4312 demand. | |
4313 etcdir and lispdir default to subdirectories of datadir. | |
4314 archlibdir defaults to libdir. | |
4315 The new installation tree is a bit deeper than it used to be, so | |
4316 use the new make-path program in lib-src to build them all. | |
4317 Always build a new src/paths.h.tmp and then move-if-change it to | |
4318 src/paths.h, to avoid unnecessary rebuilds while responding to the | |
4319 right changes. | |
4320 Remove all mention of arch-lib. Run utility commands from | |
4321 lib-src, and let the executables be copied into archlibdir when | |
4322 Emacs is installed. | |
4323 Add targets for src/Makefile, lib-src/Makefile, and | |
4324 oldXMenu/Makefile, editing the values of the path variables into | |
4325 them. | |
4326 Let lib-src do its own installation. | |
4327 (datadir): Default to putting data files under | |
4328 ${prefix}/lib/emacs/${version}, not /usr/local/emacs. | |
4329 (emacsdir): Variable deleted; it would only be confusing to use. | |
4330 (lispdir, etcdir): Default to ${datadir}/lisp. | |
4331 (mkdir): Use make-path for this. | |
4332 (lockdir): Do this in mkdir. | |
4333 (Makefile): New target. | |
4334 | |
4335 * configure (usage_message): Rename to long_usage. | |
4336 | |
4337 * make-dist: Don't bother creating an arch-lib directory; that's | |
4338 only for installation now. | |
4339 | |
4340 1992-11-20 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
4341 | |
4342 * configure: Use GCC-style configuration names, using config.sub. | |
4343 Change the usage and help messages. | |
4344 | |
4345 * configure: Initialize window_system, not indow_system. | |
4346 | |
4347 * configure: Report which window system, compiler, and signal | |
4348 handler return type we decide to use. | |
4349 | |
4350 * make-dist: Explain what's going on if config.sub and gmalloc.c | |
4351 can't be linked. Place the code which copies them near the code | |
4352 which links the rest of the files around them. | |
4353 | |
4354 1992-11-15 Jim Blandy (jimb@apple-gunkies.gnu.ai.mit.edu) | |
4355 | |
4356 * make-dist: Don't bother to distribute src/*.com, or | |
4357 src/vmsbuild; those have all been moved to `../vms'. | |
4358 | |
4359 1992-11-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
4360 | |
4361 * make-dist: Don't forget that the way to avoid filenames starting | |
4362 with `=' is to use the pattern `[a-zA-Z0-9]*.h', not | |
4363 `[a-zA-Z0-9].h'. Add a new section for dealing with files that we | |
4364 couldn't make hard links to, since we have two already, and | |
4365 perhaps more to come. | |
4366 | |
4367 1992-11-04 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
4368 | |
4369 * configure: When editing parameters into lib-src/Makefile, change | |
4370 the definition of CONFIG_CFLAGS instead of CFLAGS itself; CFLAGS | |
4371 needs some other flags too. | |
4372 | |
4373 1992-11-03 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
4374 | |
4375 * configure: Remove spurious echo of the configuration name. | |
4376 | |
4377 * make-dist: Don't distribute files in src/m and src/s whose names | |
4378 begin with `='. | |
4379 | |
4380 1992-10-27 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
4381 | |
4382 * configure: Update GNU_MALLOC and REL_ALLOC in config.h. | |
4383 Also LISP_FLOAT_TYPE. | |
4384 | |
4385 1992-10-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
4386 | |
4387 * make-dist: Copy config.sub, since it's a symbolic link to a file | |
4388 on another file system. | |
4389 | |
4390 1992-10-17 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
4391 | |
4392 * make-dist: Include lib-src/makedoc.com and emacs.csh in the | |
4393 distribution. | |
4394 | |
4395 * config.sub: New file, to help us recognize configuration names. | |
4396 * make-dist: Include it in the distribution. | |
4397 | |
4398 1992-09-14 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
4399 | |
4400 * configure: Convert `-' to `_' in specified option names. | |
4401 Accept options with --. Delete --highpri and --have-x-menu options. | |
4402 New options --with-x and --with-x10 replace -window-system. | |
4403 Don't mention options --gnu-malloc, --rel-alloc | |
4404 or --lisp-float-type in help message. | |
4405 | |
4406 1992-09-13 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4407 | |
4408 * make-dist: Include the `vms' subdirectory in the distribution. | |
4409 | |
4410 1992-09-10 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4411 | |
4412 * configure: Remove lines starting with "# DIST: " when building | |
4413 lib-src/Makefile and src/Makefile. This allows us to mark the | |
4414 "Makefile.in" files with explanatory comments which won't also get | |
4415 stuck in the Makefiles. | |
4416 | |
4417 1992-09-05 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4418 | |
4419 * make-dist: Don't use the '+' operator in the sed regular | |
4420 expression that extracts the version number from lisp/version.el; | |
4421 Ultrix sed doesn't seem support the operator. Just double the | |
4422 operand and use *. | |
4423 | |
4424 1992-09-01 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4425 | |
4426 * Makefile.in: Doc fix. | |
4427 | |
4428 1992-08-31 Jim Blandy (jimb@totoro.cs.oberlin.edu) | |
4429 | |
4430 * configure: Rewrite sed command to remove at most one ./ prefix; | |
4431 Ultrix's sed doesn't allow us to apply the * operator to a \( \) | |
4432 group. | |
4433 | |
4434 1992-08-25 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
4435 | |
4436 * Makefile.in (src/paths.h): Use sed, not /bin/sed. | |
4437 | |
4438 1992-08-18 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4439 | |
4440 * make-dist: Go ahead and build a new TAGS file, unless the | |
4441 --newer option was specified. Don't try to delete a TAGS file | |
4442 from etc; it's not kept there, and shouldn't be deleted anyway. | |
4443 | |
4444 1992-08-14 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4445 | |
4446 * make-dist: If the lisp directory contains a default.el, don't | |
4447 distribute it. | |
4448 | |
4449 * configure: When searching signal.h for the type of a signal | |
4450 return handler, make a copy of it, not a symbolic link to it; that | |
4451 way, it will work on systems that don't have symbolic links. | |
4452 | |
4453 1992-08-14 Eric S. Raymond (eric@mole.gnu.ai.mit.edu) | |
4454 | |
4455 * make-dist: taught it about vcdiff and rcs2log, added --newer | |
4456 option for generating incremental distributions. Stopped it from | |
4457 generating a TAGS file into the distribution; that sucker is | |
4458 *big*, and easily enough generated with the toplevel makefile. | |
4459 | |
4460 1992-08-13 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4461 | |
4462 * configure: When writing config.status, don't prefix progname | |
4463 with a '.'; it might be absolute. | |
4464 | |
4465 1992-08-05 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4466 | |
4467 * configure: Choose to use X11 if either /usr/lib/libX11.a or | |
4468 /usr/include/X11 exist, not only if both exist. | |
4469 | |
4470 1992-07-27 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
4471 | |
4472 * make-dist: Make the new external-lisp directory a duplicate of | |
4473 the external-lisp directory, not the lisp directory. | |
4474 | |
4475 1992-07-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
4476 | |
4477 * Makefile.in (clean, mostlyclean): Don't bother trying to `make | |
4478 clean' in arch-lib; it doesn't even have a Makefile. | |
4479 | |
4480 * Makefile.in (clean, mostlyclean): In the test which tries to | |
4481 distinguish between the build directory, which should be cleaned, | |
4482 and the installed directory, which shouldn't, cd to `${emacsdir}', | |
4483 not `${DESTDIR}${LIBDIR}'. | |
4484 | |
4485 1992-06-30 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4486 | |
4487 * make-dist: Be sure to delete the .c and .h files that YACC and | |
4488 BISON create from getdate.y. | |
4489 | |
4490 * external-lisp: New directory; see `external-lisp/README'. | |
4491 * make-dist: Added support for the external-lisp subdirectory. | |
4492 | |
4493 * make-dist: Changed message which complains that make-dist wasn't | |
4494 invoked in the right directory to indicate which files it was | |
4495 looking for. | |
4496 | |
4497 1992-06-29 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4498 | |
4499 * configure: Add comments explaining why we can't translate | |
4500 character ranges or control characters in `tr'. | |
4501 | |
4502 1992-06-24 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4503 | |
4504 * configure: When generating the configuration message, we used to | |
4505 build the message from the start so that each line began with "# " | |
4506 so that it would be a comment in `config.status'. However, this | |
4507 causes trouble if any of the variables we use in the message | |
4508 expand to more than one line of text - as gnu_malloc_reason | |
4509 sometimes does. So instead, we build the message as it should be | |
4510 printed to the user (i.e. without the "# " prefixes), and stick on | |
4511 the "# "s when we write it to `config.status'. | |
4512 | |
4513 * Makefile.in (clean, mostlyclean): Don't neglect to clean out | |
4514 `lib-src' and `arch-lib'. | |
4515 | |
4516 * configure: When generating report and `config.status' file, note | |
4517 that bindir only determines where `make install' and | |
4518 `build-install' will place the executables; this should make it | |
4519 clear that the ordinary build process will not try to install | |
4520 things. | |
4521 | |
4522 1992-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu) | |
4523 | |
4524 * make-dist: Change messages to say that we are 'making links to | |
4525 X', rather than 'copying X'. And put `' quotes around file names. | |
4526 | |
4527 * make-dist: Include '.tmp' in the name of the staging directory. | |
4528 | |
4529 * make-dist: Pass the `-f' option to rm when you're not sure that | |
4530 the files you're removing actually exist. | |
4531 | |
4532 * make-dist: When setting up etc/COPYING, always nuke whatever is | |
4533 there, and then copy it in, to make sure we get a real file. | |
4534 | |
4535 * make-dist: Don't try to distribute *.defns files any more. The | |
4536 only such file was for simula.el, which has been superceded by a | |
4537 version which doesn't have a separate .defns file. | |
4538 | |
4539 1992-05-28 Ken Raeburn (Raeburn@Cygnus.COM) | |
4540 | |
4541 * make-dist: Don't distribute configured versions of config.h.in, | |
4542 paths.h.in, Makefile.in in src. | |
4543 | |
4544 * configure: Delete .tmp files before creating them; don't bother | |
4545 trying to make final targets writeable first, since it won't | |
4546 matter to move-if-change. | |
4547 | |
4548 1992-05-19 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4549 | |
4550 * Makefile.in (mkdir, lockdir): Don't put dashes in front of the | |
4551 mkdir and chmod in the center of all the conditionals. GNU Make | |
4552 will strip these out, but other makes won't. | |
4553 | |
4554 1992-05-18 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4555 | |
4556 * make-dist: Include move-if-change in list of files to distribute. | |
4557 | |
4558 1992-05-04 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4559 | |
4560 * configure: Remove any "." elements from the program name. | |
4561 | |
4562 * configure: Don't record the values of all the possible arguments | |
4563 in config.status; only record the options that the user specified. | |
4564 | |
4565 * configure: Use move-if-change to move in the new src/config.h. | |
4566 | |
4567 1992-04-29 Ken Raeburn (Raeburn@Cygnus.COM) | |
4568 | |
4569 * move-if-change: New file, copied from gcc release. | |
4570 * Makefile.in (src/paths.h): Use it, and put the "sed" output into | |
4571 a temp file, so we don't update paths.h if an error occurs or if | |
4572 it doesn't need changing. | |
4573 | |
4574 1992-04-28 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4575 | |
4576 * Makefile.in (src/paths.h): Do not install a value for the | |
4577 PATH_SUPERLOCK value; that macro doesn't exist anymore. | |
4578 * build-install.in: Same thing. | |
4579 | |
4580 1992-04-24 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4581 | |
4582 * make-dist: Check the flag called "make_tar", not "make_dir"; the | |
4583 latter, being a typo, is always false, resulting in a program | |
4584 whose default behaviour is to painstakingly build a copy of the | |
4585 source tree, and then delete it. Rah. | |
4586 | |
4587 * Makefile.in: Add dist target, and comment for it. | |
4588 | |
4589 * configure: When scanning <signal.h> for a declaration for | |
4590 signal, create a symbolic link with a name ending in .c, so the | |
4591 compiler won't complain that it's only been given .h files. | |
4592 | |
4593 * configure: Check whether there are any arguments available | |
4594 before shifting to get the value of a non-boolean parameter. | |
4595 | |
4596 * make-dist: Doc fix. | |
4597 | |
4598 1992-04-20 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4599 | |
4600 * configure: Instead of grepping /usr/include/signal.h for a | |
4601 signal declaration, run /usr/include/signal.h or | |
4602 /usr/include/sys/signal.h through cpp and grep for the | |
4603 declaration. | |
4604 | |
4605 * configure: Redirect the output of grep to /dev/null instead of | |
4606 using grep -s - that flag means different things on other systems. | |
4607 | |
4608 * Makefile.in: Use 'buildlisppath' instead of 'dumplisppath', | |
4609 since the former is recognizable even if you don't know what | |
4610 'dumping' is. | |
4611 * configure: Accomodate that change. | |
4612 | |
4613 * configure: Accept options for all of the directories you can | |
4614 change in the Makefile. | |
4615 | |
4616 * configure: Accept "-OPTION VALUE" as well as "-OPTION=VALUE". | |
4617 | |
4618 * INSTALL: Mention that you have to copy all the 'FOO.in' files to | |
4619 FOO before you can use them. | |
4620 | |
4621 * build-install.in: Made the "Where To Install Things" section | |
4622 conform with the similar section from Makefile.in. Copied section | |
4623 which builds src/paths.h from src/paths.h.in from the Makefile. | |
4624 | |
4625 1992-04-19 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4626 | |
4627 * configure: Write config.status to pass its command-line | |
4628 arguments on to configure, so that people can use it to recreate | |
4629 an old configuration, with minor changes. | |
4630 | |
4631 1992-04-16 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4632 | |
4633 * configure: Don't rely on option variables being unset if their | |
4634 values are the empty string. In particular, when producing the | |
4635 English report, don't assume that highpri will be unset when no | |
4636 increased priority has been requested; -highpri='' should be the | |
4637 same as omitting -highpri altogether. | |
4638 | |
4639 * configure: Fix dumb bug: when running the system and machine | |
4640 description files through cpp, mark those lines that we want to | |
4641 evaluate with the string '@configure@', and then only evaluate | |
4642 them. This way if the files include anything that actually | |
4643 generates text (type definitions or external declarations, say), | |
4644 we won't try to eval it. | |
4645 | |
4646 1992-04-11 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4647 | |
4648 * make-dist: New shell script. | |
4649 | |
4650 * configure: When creating foo from foo.in, make foo read-only to | |
4651 remind people to edit the .in file instead. | |
4652 | |
4653 * INSTALL: Changed references to config.h-dist to config.h.in. | |
4654 The "BUILDING GNU EMACS BY HAND" section neglected to mention how | |
4655 to build src/paths.h from src/paths.h.in; added a paragraph to do | |
4656 this. | |
4657 * configure, Makefile, build-install: Changed filenames like | |
4658 FOO-dist to FOO.in. | |
4659 | |
4660 1992-04-08 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4661 | |
4662 * Makefile, build-install: Renamed to Makefile.in and | |
4663 build-install.in; the configure script will edit these to produce | |
4664 the usable Makefile and build-install. | |
4665 * configure: Changed to produce ./Makefile, ./build-install, | |
4666 lib-src/Makefile, and src/Makefile from their *.in counterparts, | |
4667 instead of editing them in place. | |
4668 | |
4669 1992-04-07 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4670 | |
4671 * Makefile: Re-arranged so that the undumped Emacs will search | |
4672 ../lisp *after* the site's local elisp files. | |
4673 (locallisppath, dumplisppath): New variables. | |
4674 (lisppath): This variable's default value is now chosen based on | |
4675 $(locallisppath) and $(lispdir); while it used to be the | |
4676 customization point for adding site-local elisp directories to | |
4677 load-path, that job is now handled mostly by locallisppath. | |
4678 (src/paths.h): Edit the value of a new macro, PATH_DUMPLOADSEARCH. | |
4679 Check the values being assigned to the *LOADSEARCH macros for null | |
4680 path elements (like '::' in 'foo::bar'). | |
4681 | |
4682 * configure: When checking if the machine- and system-dependent | |
4683 files define a particular macro or not, actually run them through | |
4684 CPP and test the macros with #ifs, instead of just grepping for | |
4685 the macros' names. In particular, check for SYSTEM_MALLOC in this | |
4686 way. | |
4687 | |
4688 1992-04-03 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
4689 | |
4690 * Makefile (install): Don't use -s in install. (Keep the symbols.) | |
4691 | |
4692 1992-04-02 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4693 | |
4694 * configure: Make the config.status file an executable shell | |
4695 script which will recreate the same configuration. Include the | |
4696 verbal description of the current configuration as a comment in | |
4697 the script. | |
4698 * INSTALL: Doc fix. | |
4699 | |
4700 * Makefile: brought the Makefile up to the GNU coding | |
4701 standards, as described in standards.text: | |
4702 (TAGS): New name for the target which rebuilds the tags table. | |
4703 (check): New target; doesn't do anything yet. | |
4704 (mostlyclean): New target, synonymous with clean. | |
4705 (realclean): New target. Currently, this just calls the | |
4706 subdirectories's makefiles and then deletes config.status. | |
4707 (INSTALL, INSTALLFLAGS, INSTALL_PROGRAM, INSTALL_DATA): New | |
4708 variables. | |
4709 Installation directory variables changed to conform. | |
4710 (install, install.sysv, install.xenix, install.aix): Changed the | |
4711 code which copies the directories into their installed location to | |
4712 allow the installed locations to be in several different | |
4713 directories; the old version assumed that they would all be in | |
4714 $(emacsdir). | |
4715 (mkdir, lockdir): Allow the installed locations to be in several | |
4716 different directories. | |
4717 * INSTALL: Doc fix. | |
4718 | |
4719 * build-install: Use the same variable names as the Makefile. | |
4720 Allow the installed locations to be in several different | |
4721 directories. | |
4722 | |
4723 1992-03-31 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4724 | |
4725 * Makefile (src/paths.h): Instead of using a single sed command to | |
4726 edit both the PATH_LOCK and PATH_SUPERLOCK macros, edit the two | |
4727 separately, and don't forget to append "/!!!SuperLock!!!" to the | |
4728 value of the PATH_SUPERLOCK macro. | |
4729 | |
4730 * config.emacs: Renamed to configure, for consistency with other | |
4731 GNU products. Internal references changed. | |
4732 INSTALL, Makefile: References changed. | |
4733 | |
4734 * lock: New directory, which should always be empty. If this | |
4735 directory doesn't exist, Emacs won't complain; it just won't lock. | |
4736 Having this here means that people can just unpack Emacs, build | |
4737 it, and have locking work. | |
4738 | |
4739 * share-lib: Re-renamed to etc, for the sake of tradition. | |
4740 * config.emacs: Changed default value for datadir to ../etc. | |
4741 * INSTALL, README: Adjusted. | |
4742 | |
4743 1992-03-18 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4744 | |
4745 * config.emacs: Guess the value for LOADLIBES in lib-src/Makefile | |
4746 by running CPP on the appropriate s/*.h and m/*.h files. | |
4747 | |
4748 1992-03-16 Jim Blandy (jimb@pogo.cs.oberlin.edu) | |
4749 | |
4750 * config.emacs: Make sure to set the "exit on error" flag once | |
4751 we've removed config.status; errors should abort the configuration. | |
4752 | |
4753 1992-02-15 Jim Blandy (jimb at pogo.cs.oberlin.edu) | |
4754 | |
4755 * config.emacs: Added -distribute option, so that the Makefile | |
4756 paths are in their proper form. I don't know why this matters. | |
4757 | |
4758 1992-02-14 Jim Blandy (jimb at pogo.cs.oberlin.edu) | |
4759 | |
4760 * local-lisp: New directory, empty in the distribution, for people | |
4761 to put local elisp code in. | |
4762 * config.emacs: Include it in the default load path. | |
4763 * README: Document it. | |
4764 | |
4765 1992-01-30 Jim Blandy (jimb at pogo.cs.oberlin.edu) | |
4766 | |
4767 * config.emacs: Guess the type of signal handling functions based | |
4768 on the contents of /usr/include/signal.h. | |
4769 | |
4770 * config.emacs: Print out progress report messages. | |
4771 | |
4772 * Makefile (src/paths.h): Don't generically replace | |
4773 /usr/local/lib/emacs with LIBROOT. This can hide bugs in the | |
4774 editing of the other entries, and each entry should be dealt with | |
4775 explicitly anyway. | |
4776 | |
4777 * build-install: Converted from C-shell to Bourne shell. | |
4778 * config.emacs: Edit build-install properly. | |
4779 | |
4780 * config.emacs: Doc fix. | |
4781 | |
4782 1992-01-27 Richard Stallman (rms@mole.gnu.ai.mit.edu) | |
4783 | |
4784 * Makefile (install): Remove `B' from tar xf command. | |
4785 | |
4786 1992-01-13 Jim Blandy (jimb at pogo.cs.oberlin.edu) | |
4787 | |
4788 * config.emacs: Removed support for the `maintain-environment' | |
4789 option; the only important difference between this and its absence | |
4790 has been removed. | |
4791 * INSTALL: Removed mention of `maintain-environment'. | |
4792 | |
4793 * config.emacs: Fix arguments to sed when processing boolean | |
4794 arguments. | |
4795 | |
4796 1991-12-05 Jim Blandy (jimb at pogo.gnu.ai.mit.edu) | |
4797 | |
4798 * config.emacs: New file, to help automate the installation | |
4799 process. | |
4800 | |
4801 * Makefile: Lots of changes to support the separation of etc into | |
4802 architecture-dependent and -independent files: | |
4803 (EMACSROOT): New variable, giving the directory under which all of | |
4804 Emacs's libraries should be installed. Changed rest of file to | |
4805 use it. | |
4806 (LIBDIR): Now denotes only architecture-dependent dir - relevant cha | |
4807 (DATADIR): New variable, denoting architecture-independent dir. | |
4808 (LOCKDIR): New variable, for completeness. | |
4809 (SUBDIR): No more etc, new lib-src. | |
4810 (COPYDIR): No more etc, new arch-lib and share-lib. | |
4811 (src/paths.h): Set PATH_DATA and the LOCK macros too. | |
4812 (src): Now depends on lib-src, not etc. | |
4813 * build-install: Changes parallel to the above. | |
4814 * README: Describe the new arrangement. | |
4815 | |
4816 * vms: New subdirectory for all the VMS stuff. | |
4817 | |
4818 1991-12-03 Jim Blandy (jimb at pogo.gnu.ai.mit.edu) | |
4819 | |
4820 * Makefile (LISPPATH): New variable. | |
4821 (src/paths.h): Define PATH_LOADSEARCH according to LISPPATH. | |
4822 | |
4823 1990-09-28 Richard Stallman (rms at mole.ai.mit.edu) | |
4824 | |
4825 * Makefile (install, install.sysv, install.xenix): | |
4826 Install wakeup instead of loadst. No need for setuid or setgid. | |
4827 | |
4828 1990-08-07 Richard Stallman (rms at sugar-bombs.ai.mit.edu) | |
4829 | |
4830 * Makefile (clean): Clean etc if that's not the installation dir. | |
4831 | |
4832 1990-04-26 Richard Stallman (rms at sugar-bombs.ai.mit.edu) | |
4833 | |
4834 * Makefile (paths.h): Make sed alter each name in the path. | |
4835 | |
4836 1988-08-30 Richard Stallman (rms at sugar-bombs.ai.mit.edu) | |
4837 | |
4838 * Makefile (install.sysv): Use cpio, not tar. | |
4839 | |
4840 1988-08-03 Richard Stallman (rms at sugar-bombs.ai.mit.edu) | |
4841 | |
4842 * Makefile (lockdir): Rename `lock' target. | |
4843 Depend on it from install*, not from `all'. | |
4844 | |
4845 1988-05-16 Richard Stallman (rms at frosted-flakes.ai.mit.edu) | |
4846 | |
4847 * Makefile: Changed LIBDIR and BINDIR back to /usr/local/{emacs,bin} | |
4848 to match build-install and paths.h. | |
30994 | 4849 |
4850 ;; Local Variables: | |
4851 ;; coding: iso-2022-7bit-unix | |
4852 ;; End: |