Mercurial > emacs
annotate doc/lispref/variables.texi @ 107984:bef5d1738c0b
Make variable forwarding explicit rather the using special values.
Basically, this makes the structure of buffer-local values and object
forwarding explicit in the type of Lisp_Symbols rather than use
special Lisp_Objects for that. This tends to lead to slightly more
verbose code, but is more C-like, simpler, and makes it easier to make
sure we handled all cases, among other things by letting the compiler
help us check it.
* lisp.h (enum Lisp_Misc_Type, union Lisp_Misc):
Removing forwarding objects.
(enum Lisp_Fwd_Type, enum symbol_redirect, union Lisp_Fwd): New types.
(struct Lisp_Symbol): Make the various forms of variable-forwarding
explicit rather than hiding them inside Lisp_Object "values".
(XFWDTYPE): New macro.
(XINTFWD, XBOOLFWD, XOBJFWD, XKBOARD_OBJFWD): Redefine.
(XBUFFER_LOCAL_VALUE): Remove.
(SYMBOL_VAL, SYMBOL_ALIAS, SYMBOL_BLV, SYMBOL_FWD, SET_SYMBOL_VAL)
(SET_SYMBOL_ALIAS, SET_SYMBOL_BLV, SET_SYMBOL_FWD): New macros.
(SYMBOL_VALUE, SET_SYMBOL_VALUE): Remove.
(struct Lisp_Intfwd, struct Lisp_Boolfwd, struct Lisp_Objfwd)
(struct Lisp_Buffer_Objfwd, struct Lisp_Kboard_Objfwd):
Remove the Lisp_Misc_* header.
(struct Lisp_Buffer_Local_Value): Redefine.
(BLV_FOUND, SET_BLV_FOUND, BLV_VALUE, SET_BLV_VALUE): New macros.
(struct Lisp_Misc_Any): Add filler to get the right size.
(struct Lisp_Free): Use struct Lisp_Misc_Any rather than struct
Lisp_Intfwd.
(DEFVAR_LISP, DEFVAR_LISP_NOPRO, DEFVAR_BOOL, DEFVAR_INT)
(DEFVAR_KBOARD): Allocate a forwarding object.
* data.c (do_blv_forwarding, store_blv_forwarding): New macros.
(let_shadows_global_binding_p): New function.
(union Lisp_Val_Fwd): New type.
(make_blv): New function.
(swap_in_symval_forwarding, indirect_variable, do_symval_forwarding)
(store_symval_forwarding, swap_in_global_binding, Fboundp)
(swap_in_symval_forwarding, find_symbol_value, Fset)
(let_shadows_buffer_binding_p, set_internal, default_value)
(Fset_default, Fmake_variable_buffer_local, Fmake_local_variable)
(Fkill_local_variable, Fmake_variable_frame_local)
(Flocal_variable_p, Flocal_variable_if_set_p)
(Fvariable_binding_locus):
* xdisp.c (select_frame_for_redisplay):
* lread.c (Fintern, Funintern, init_obarray, defvar_int)
(defvar_bool, defvar_lisp_nopro, defvar_lisp, defvar_kboard):
* frame.c (store_frame_param):
* eval.c (Fdefvaralias, Fuser_variable_p, specbind, unbind_to):
* bytecode.c (Fbyte_code) <varref, varset>: Adapt to the new symbol
value structure.
* buffer.c (PER_BUFFER_SYMBOL): Move from buffer.h.
(clone_per_buffer_values): Only adjust markers into the current buffer.
(reset_buffer_local_variables): PER_BUFFER_IDX is never -2.
(Fbuffer_local_value, set_buffer_internal_1)
(swap_out_buffer_local_variables):
Adapt to the new symbol value structure.
(DEFVAR_PER_BUFFER): Allocate a Lisp_Buffer_Objfwd object.
(defvar_per_buffer): Take a new arg for the fwd object.
(buffer_lisp_local_variables): Return a proper alist (different fix
for bug#4138).
* alloc.c (Fmake_symbol): Use SET_SYMBOL_VAL.
(Fgarbage_collect): Don't handle buffer_defaults specially.
(mark_object): Handle new symbol value structure rather than the old
special Lisp_Misc_* objects.
(gc_sweep) <symbols>: Free also the buffer-local-value objects.
* term.c (set_tty_color_mode):
* bidi.c (bidi_initialize): Don't access the ->value field directly.
* buffer.h (PER_BUFFER_VAR_OFFSET): Don't bother with
a buffer_local_flags.
* print.c (print_object): Get rid of impossible forwarding objects.
author | Stefan Monnier <monnier@iro.umontreal.ca> |
---|---|
date | Mon, 19 Apr 2010 21:50:52 -0400 |
parents | 1d1d5d9bd884 |
children | 70ad6f6f15c7 |
rev | line source |
---|---|
84109 | 1 @c -*-texinfo-*- |
2 @c This is part of the GNU Emacs Lisp Reference Manual. | |
3 @c Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1998, 1999, 2000, | |
106815 | 4 @c 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 |
103456
22a2d318807d
(Directory Local Variables): Update for 2009-04-11 name-change of
Glenn Morris <rgm@gnu.org>
parents:
103273
diff
changeset
|
5 @c Free Software Foundation, Inc. |
84109 | 6 @c See the file elisp.texi for copying conditions. |
84116
0ba80d073e27
(setfilename): Go up one more level to ../../info.
Glenn Morris <rgm@gnu.org>
parents:
84109
diff
changeset
|
7 @setfilename ../../info/variables |
84109 | 8 @node Variables, Functions, Control Structures, Top |
9 @chapter Variables | |
10 @cindex variable | |
11 | |
12 A @dfn{variable} is a name used in a program to stand for a value. | |
13 Nearly all programming languages have variables of some sort. In the | |
14 text of a Lisp program, variables are written using the syntax for | |
15 symbols. | |
16 | |
17 In Lisp, unlike most programming languages, programs are represented | |
18 primarily as Lisp objects and only secondarily as text. The Lisp | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
19 objects used for variables are symbols: the symbol name is the |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
20 variable name, and the variable's value is stored in the value cell of |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
21 the symbol. The use of a symbol as a variable is independent of its |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
22 use as a function name. @xref{Symbol Components}. |
84109 | 23 |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
24 The textual form of a Lisp program is given by the read syntax of |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
25 the Lisp objects that constitute the program. Hence, a variable in a |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
26 textual Lisp program is written using the read syntax for the symbol |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
27 representing the variable. |
84109 | 28 |
29 @menu | |
30 * Global Variables:: Variable values that exist permanently, everywhere. | |
31 * Constant Variables:: Certain "variables" have values that never change. | |
32 * Local Variables:: Variable values that exist only temporarily. | |
33 * Void Variables:: Symbols that lack values. | |
34 * Defining Variables:: A definition says a symbol is used as a variable. | |
35 * Tips for Defining:: Things you should think about when you | |
36 define a variable. | |
37 * Accessing Variables:: Examining values of variables whose names | |
38 are known only at run time. | |
39 * Setting Variables:: Storing new values in variables. | |
40 * Variable Scoping:: How Lisp chooses among local and global values. | |
41 * Buffer-Local Variables:: Variable values in effect only in one buffer. | |
100710
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
42 * File Local Variables:: Handling local variable lists in files. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
43 * Directory Local Variables:: Local variables common to all files in a directory. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
44 * Frame-Local Variables:: Frame-local bindings for variables. |
84109 | 45 * Variable Aliases:: Variables that are aliases for other variables. |
46 * Variables with Restricted Values:: Non-constant variables whose value can | |
47 @emph{not} be an arbitrary Lisp object. | |
48 @end menu | |
49 | |
50 @node Global Variables | |
51 @section Global Variables | |
52 @cindex global variable | |
53 | |
54 The simplest way to use a variable is @dfn{globally}. This means that | |
55 the variable has just one value at a time, and this value is in effect | |
56 (at least for the moment) throughout the Lisp system. The value remains | |
57 in effect until you specify a new one. When a new value replaces the | |
58 old one, no trace of the old value remains in the variable. | |
59 | |
60 You specify a value for a symbol with @code{setq}. For example, | |
61 | |
62 @example | |
63 (setq x '(a b)) | |
64 @end example | |
65 | |
66 @noindent | |
67 gives the variable @code{x} the value @code{(a b)}. Note that | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
68 @code{setq} is a special form (@pxref{Special Forms}); it does not |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
69 evaluate its first argument, the name of the variable, but it does |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
70 evaluate the second argument, the new value. |
84109 | 71 |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
72 Once the variable has a value, you can refer to it by using the |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
73 symbol itself as an expression. Thus, |
84109 | 74 |
75 @example | |
76 @group | |
77 x @result{} (a b) | |
78 @end group | |
79 @end example | |
80 | |
81 @noindent | |
82 assuming the @code{setq} form shown above has already been executed. | |
83 | |
84 If you do set the same variable again, the new value replaces the old | |
85 one: | |
86 | |
87 @example | |
88 @group | |
89 x | |
90 @result{} (a b) | |
91 @end group | |
92 @group | |
93 (setq x 4) | |
94 @result{} 4 | |
95 @end group | |
96 @group | |
97 x | |
98 @result{} 4 | |
99 @end group | |
100 @end example | |
101 | |
102 @node Constant Variables | |
103 @section Variables that Never Change | |
104 @kindex setting-constant | |
105 @cindex keyword symbol | |
106 @cindex variable with constant value | |
107 @cindex constant variables | |
108 @cindex symbol that evaluates to itself | |
109 @cindex symbol with constant value | |
110 | |
111 In Emacs Lisp, certain symbols normally evaluate to themselves. These | |
112 include @code{nil} and @code{t}, as well as any symbol whose name starts | |
113 with @samp{:} (these are called @dfn{keywords}). These symbols cannot | |
114 be rebound, nor can their values be changed. Any attempt to set or bind | |
115 @code{nil} or @code{t} signals a @code{setting-constant} error. The | |
116 same is true for a keyword (a symbol whose name starts with @samp{:}), | |
117 if it is interned in the standard obarray, except that setting such a | |
118 symbol to itself is not an error. | |
119 | |
120 @example | |
121 @group | |
122 nil @equiv{} 'nil | |
123 @result{} nil | |
124 @end group | |
125 @group | |
126 (setq nil 500) | |
127 @error{} Attempt to set constant symbol: nil | |
128 @end group | |
129 @end example | |
130 | |
131 @defun keywordp object | |
132 function returns @code{t} if @var{object} is a symbol whose name | |
133 starts with @samp{:}, interned in the standard obarray, and returns | |
134 @code{nil} otherwise. | |
135 @end defun | |
136 | |
105622
929678fafdb4
* variables.texi (Constant Variables): Distinguish from defconst
Chong Yidong <cyd@stupidchicken.com>
parents:
103456
diff
changeset
|
137 These constants are fundamentally different from the ``constants'' |
929678fafdb4
* variables.texi (Constant Variables): Distinguish from defconst
Chong Yidong <cyd@stupidchicken.com>
parents:
103456
diff
changeset
|
138 defined using the @code{defconst} special form (@pxref{Defining |
929678fafdb4
* variables.texi (Constant Variables): Distinguish from defconst
Chong Yidong <cyd@stupidchicken.com>
parents:
103456
diff
changeset
|
139 Variables}). A @code{defconst} form serves to inform human readers |
929678fafdb4
* variables.texi (Constant Variables): Distinguish from defconst
Chong Yidong <cyd@stupidchicken.com>
parents:
103456
diff
changeset
|
140 that you do not intend to change the value of a variable, but Emacs |
929678fafdb4
* variables.texi (Constant Variables): Distinguish from defconst
Chong Yidong <cyd@stupidchicken.com>
parents:
103456
diff
changeset
|
141 does not raise an error if you actually change it. |
929678fafdb4
* variables.texi (Constant Variables): Distinguish from defconst
Chong Yidong <cyd@stupidchicken.com>
parents:
103456
diff
changeset
|
142 |
84109 | 143 @node Local Variables |
144 @section Local Variables | |
145 @cindex binding local variables | |
146 @cindex local variables | |
147 @cindex local binding | |
148 @cindex global binding | |
149 | |
150 Global variables have values that last until explicitly superseded | |
151 with new values. Sometimes it is useful to create variable values that | |
152 exist temporarily---only until a certain part of the program finishes. | |
153 These values are called @dfn{local}, and the variables so used are | |
154 called @dfn{local variables}. | |
155 | |
156 For example, when a function is called, its argument variables receive | |
157 new local values that last until the function exits. The @code{let} | |
158 special form explicitly establishes new local values for specified | |
159 variables; these last until exit from the @code{let} form. | |
160 | |
161 @cindex shadowing of variables | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
162 Establishing a local value saves away the variable's previous value |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
163 (or lack of one). We say that the previous value is @dfn{shadowed} |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
164 and @dfn{not visible}. Both global and local values may be shadowed |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
165 (@pxref{Scope}). After the life span of the local value is over, the |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
166 previous value (or lack of one) is restored. |
84109 | 167 |
168 If you set a variable (such as with @code{setq}) while it is local, | |
169 this replaces the local value; it does not alter the global value, or | |
170 previous local values, that are shadowed. To model this behavior, we | |
171 speak of a @dfn{local binding} of the variable as well as a local value. | |
172 | |
173 The local binding is a conceptual place that holds a local value. | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
174 Entering a function, or a special form such as @code{let}, creates the |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
175 local binding; exiting the function or the @code{let} removes the |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
176 local binding. While the local binding lasts, the variable's value is |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
177 stored within it. Using @code{setq} or @code{set} while there is a |
84109 | 178 local binding stores a different value into the local binding; it does |
179 not create a new binding. | |
180 | |
181 We also speak of the @dfn{global binding}, which is where | |
182 (conceptually) the global value is kept. | |
183 | |
184 @cindex current binding | |
185 A variable can have more than one local binding at a time (for | |
186 example, if there are nested @code{let} forms that bind it). In such a | |
187 case, the most recently created local binding that still exists is the | |
188 @dfn{current binding} of the variable. (This rule is called | |
189 @dfn{dynamic scoping}; see @ref{Variable Scoping}.) If there are no | |
190 local bindings, the variable's global binding is its current binding. | |
191 We sometimes call the current binding the @dfn{most-local existing | |
192 binding}, for emphasis. Ordinary evaluation of a symbol always returns | |
193 the value of its current binding. | |
194 | |
195 The special forms @code{let} and @code{let*} exist to create | |
196 local bindings. | |
197 | |
198 @defspec let (bindings@dots{}) forms@dots{} | |
199 This special form binds variables according to @var{bindings} and then | |
200 evaluates all of the @var{forms} in textual order. The @code{let}-form | |
201 returns the value of the last form in @var{forms}. | |
202 | |
203 Each of the @var{bindings} is either @w{(i) a} symbol, in which case | |
204 that symbol is bound to @code{nil}; or @w{(ii) a} list of the form | |
205 @code{(@var{symbol} @var{value-form})}, in which case @var{symbol} is | |
206 bound to the result of evaluating @var{value-form}. If @var{value-form} | |
207 is omitted, @code{nil} is used. | |
208 | |
209 All of the @var{value-form}s in @var{bindings} are evaluated in the | |
210 order they appear and @emph{before} binding any of the symbols to them. | |
211 Here is an example of this: @code{z} is bound to the old value of | |
212 @code{y}, which is 2, not the new value of @code{y}, which is 1. | |
213 | |
214 @example | |
215 @group | |
216 (setq y 2) | |
217 @result{} 2 | |
218 @end group | |
219 @group | |
220 (let ((y 1) | |
221 (z y)) | |
222 (list y z)) | |
223 @result{} (1 2) | |
224 @end group | |
225 @end example | |
226 @end defspec | |
227 | |
228 @defspec let* (bindings@dots{}) forms@dots{} | |
229 This special form is like @code{let}, but it binds each variable right | |
230 after computing its local value, before computing the local value for | |
231 the next variable. Therefore, an expression in @var{bindings} can | |
232 reasonably refer to the preceding symbols bound in this @code{let*} | |
233 form. Compare the following example with the example above for | |
234 @code{let}. | |
235 | |
236 @example | |
237 @group | |
238 (setq y 2) | |
239 @result{} 2 | |
240 @end group | |
241 @group | |
242 (let* ((y 1) | |
243 (z y)) ; @r{Use the just-established value of @code{y}.} | |
244 (list y z)) | |
245 @result{} (1 1) | |
246 @end group | |
247 @end example | |
248 @end defspec | |
249 | |
250 Here is a complete list of the other facilities that create local | |
251 bindings: | |
252 | |
253 @itemize @bullet | |
254 @item | |
255 Function calls (@pxref{Functions}). | |
256 | |
257 @item | |
258 Macro calls (@pxref{Macros}). | |
259 | |
260 @item | |
261 @code{condition-case} (@pxref{Errors}). | |
262 @end itemize | |
263 | |
264 Variables can also have buffer-local bindings (@pxref{Buffer-Local | |
85688 | 265 Variables}); a few variables have terminal-local bindings |
102846
a447859a557b
* frames.texi (Frames): Clean up introduction. Document `ns'
Chong Yidong <cyd@stupidchicken.com>
parents:
102306
diff
changeset
|
266 (@pxref{Multiple Terminals}). These kinds of bindings work somewhat |
85688 | 267 like ordinary local bindings, but they are localized depending on |
268 ``where'' you are in Emacs, rather than localized in time. | |
84109 | 269 |
103273
c32ec20d0ab5
* abbrevs.texi (Abbrev Mode): abbrev-mode is an option.
Martin Rudalics <rudalics@gmx.at>
parents:
103102
diff
changeset
|
270 @defopt max-specpdl-size |
84109 | 271 @anchor{Definition of max-specpdl-size} |
272 @cindex variable limit error | |
273 @cindex evaluation error | |
274 @cindex infinite recursion | |
275 This variable defines the limit on the total number of local variable | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
276 bindings and @code{unwind-protect} cleanups (see @ref{Cleanups,, |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
277 Cleaning Up from Nonlocal Exits}) that are allowed before Emacs |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
278 signals an error (with data @code{"Variable binding depth exceeds |
84109 | 279 max-specpdl-size"}). |
280 | |
281 This limit, with the associated error when it is exceeded, is one way | |
282 that Lisp avoids infinite recursion on an ill-defined function. | |
283 @code{max-lisp-eval-depth} provides another limit on depth of nesting. | |
284 @xref{Definition of max-lisp-eval-depth,, Eval}. | |
285 | |
286 The default value is 1000. Entry to the Lisp debugger increases the | |
287 value, if there is little room left, to make sure the debugger itself | |
288 has room to execute. | |
103273
c32ec20d0ab5
* abbrevs.texi (Abbrev Mode): abbrev-mode is an option.
Martin Rudalics <rudalics@gmx.at>
parents:
103102
diff
changeset
|
289 @end defopt |
84109 | 290 |
291 @node Void Variables | |
292 @section When a Variable is ``Void'' | |
293 @kindex void-variable | |
294 @cindex void variable | |
295 | |
296 If you have never given a symbol any value as a global variable, we | |
297 say that that symbol's global value is @dfn{void}. In other words, the | |
298 symbol's value cell does not have any Lisp object in it. If you try to | |
299 evaluate the symbol, you get a @code{void-variable} error rather than | |
300 a value. | |
301 | |
302 Note that a value of @code{nil} is not the same as void. The symbol | |
303 @code{nil} is a Lisp object and can be the value of a variable just as any | |
304 other object can be; but it is @emph{a value}. A void variable does not | |
305 have any value. | |
306 | |
307 After you have given a variable a value, you can make it void once more | |
308 using @code{makunbound}. | |
309 | |
310 @defun makunbound symbol | |
311 This function makes the current variable binding of @var{symbol} void. | |
312 Subsequent attempts to use this symbol's value as a variable will signal | |
313 the error @code{void-variable}, unless and until you set it again. | |
314 | |
315 @code{makunbound} returns @var{symbol}. | |
316 | |
317 @example | |
318 @group | |
319 (makunbound 'x) ; @r{Make the global value of @code{x} void.} | |
320 @result{} x | |
321 @end group | |
322 @group | |
323 x | |
324 @error{} Symbol's value as variable is void: x | |
325 @end group | |
326 @end example | |
327 | |
328 If @var{symbol} is locally bound, @code{makunbound} affects the most | |
329 local existing binding. This is the only way a symbol can have a void | |
330 local binding, since all the constructs that create local bindings | |
331 create them with values. In this case, the voidness lasts at most as | |
332 long as the binding does; when the binding is removed due to exit from | |
333 the construct that made it, the previous local or global binding is | |
334 reexposed as usual, and the variable is no longer void unless the newly | |
335 reexposed binding was void all along. | |
336 | |
337 @smallexample | |
338 @group | |
339 (setq x 1) ; @r{Put a value in the global binding.} | |
340 @result{} 1 | |
341 (let ((x 2)) ; @r{Locally bind it.} | |
342 (makunbound 'x) ; @r{Void the local binding.} | |
343 x) | |
344 @error{} Symbol's value as variable is void: x | |
345 @end group | |
346 @group | |
347 x ; @r{The global binding is unchanged.} | |
348 @result{} 1 | |
349 | |
350 (let ((x 2)) ; @r{Locally bind it.} | |
351 (let ((x 3)) ; @r{And again.} | |
352 (makunbound 'x) ; @r{Void the innermost-local binding.} | |
353 x)) ; @r{And refer: it's void.} | |
354 @error{} Symbol's value as variable is void: x | |
355 @end group | |
356 | |
357 @group | |
358 (let ((x 2)) | |
359 (let ((x 3)) | |
360 (makunbound 'x)) ; @r{Void inner binding, then remove it.} | |
361 x) ; @r{Now outer @code{let} binding is visible.} | |
362 @result{} 2 | |
363 @end group | |
364 @end smallexample | |
365 @end defun | |
366 | |
367 A variable that has been made void with @code{makunbound} is | |
368 indistinguishable from one that has never received a value and has | |
369 always been void. | |
370 | |
371 You can use the function @code{boundp} to test whether a variable is | |
372 currently void. | |
373 | |
374 @defun boundp variable | |
375 @code{boundp} returns @code{t} if @var{variable} (a symbol) is not void; | |
376 more precisely, if its current binding is not void. It returns | |
377 @code{nil} otherwise. | |
378 | |
379 @smallexample | |
380 @group | |
381 (boundp 'abracadabra) ; @r{Starts out void.} | |
382 @result{} nil | |
383 @end group | |
384 @group | |
385 (let ((abracadabra 5)) ; @r{Locally bind it.} | |
386 (boundp 'abracadabra)) | |
387 @result{} t | |
388 @end group | |
389 @group | |
390 (boundp 'abracadabra) ; @r{Still globally void.} | |
391 @result{} nil | |
392 @end group | |
393 @group | |
394 (setq abracadabra 5) ; @r{Make it globally nonvoid.} | |
395 @result{} 5 | |
396 @end group | |
397 @group | |
398 (boundp 'abracadabra) | |
399 @result{} t | |
400 @end group | |
401 @end smallexample | |
402 @end defun | |
403 | |
404 @node Defining Variables | |
405 @section Defining Global Variables | |
406 @cindex variable definition | |
407 | |
408 You may announce your intention to use a symbol as a global variable | |
409 with a @dfn{variable definition}: a special form, either @code{defconst} | |
410 or @code{defvar}. | |
411 | |
412 In Emacs Lisp, definitions serve three purposes. First, they inform | |
413 people who read the code that certain symbols are @emph{intended} to be | |
414 used a certain way (as variables). Second, they inform the Lisp system | |
415 of these things, supplying a value and documentation. Third, they | |
416 provide information to utilities such as @code{etags} and | |
417 @code{make-docfile}, which create data bases of the functions and | |
418 variables in a program. | |
419 | |
420 The difference between @code{defconst} and @code{defvar} is primarily | |
421 a matter of intent, serving to inform human readers of whether the value | |
422 should ever change. Emacs Lisp does not restrict the ways in which a | |
423 variable can be used based on @code{defconst} or @code{defvar} | |
424 declarations. However, it does make a difference for initialization: | |
425 @code{defconst} unconditionally initializes the variable, while | |
426 @code{defvar} initializes it only if it is void. | |
427 | |
428 @ignore | |
429 One would expect user option variables to be defined with | |
430 @code{defconst}, since programs do not change them. Unfortunately, this | |
431 has bad results if the definition is in a library that is not preloaded: | |
432 @code{defconst} would override any prior value when the library is | |
433 loaded. Users would like to be able to set user options in their init | |
434 files, and override the default values given in the definitions. For | |
435 this reason, user options must be defined with @code{defvar}. | |
436 @end ignore | |
437 | |
438 @defspec defvar symbol [value [doc-string]] | |
439 This special form defines @var{symbol} as a variable and can also | |
440 initialize and document it. The definition informs a person reading | |
441 your code that @var{symbol} is used as a variable that might be set or | |
442 changed. Note that @var{symbol} is not evaluated; the symbol to be | |
443 defined must appear explicitly in the @code{defvar}. | |
444 | |
445 If @var{symbol} is void and @var{value} is specified, @code{defvar} | |
446 evaluates it and sets @var{symbol} to the result. But if @var{symbol} | |
447 already has a value (i.e., it is not void), @var{value} is not even | |
448 evaluated, and @var{symbol}'s value remains unchanged. If @var{value} | |
449 is omitted, the value of @var{symbol} is not changed in any case. | |
450 | |
451 If @var{symbol} has a buffer-local binding in the current buffer, | |
452 @code{defvar} operates on the default value, which is buffer-independent, | |
453 not the current (buffer-local) binding. It sets the default value if | |
454 the default value is void. @xref{Buffer-Local Variables}. | |
455 | |
456 When you evaluate a top-level @code{defvar} form with @kbd{C-M-x} in | |
457 Emacs Lisp mode (@code{eval-defun}), a special feature of | |
458 @code{eval-defun} arranges to set the variable unconditionally, without | |
459 testing whether its value is void. | |
460 | |
461 If the @var{doc-string} argument appears, it specifies the documentation | |
462 for the variable. (This opportunity to specify documentation is one of | |
463 the main benefits of defining the variable.) The documentation is | |
464 stored in the symbol's @code{variable-documentation} property. The | |
465 Emacs help functions (@pxref{Documentation}) look for this property. | |
466 | |
99898
d9a2d006b717
(Defining Variables): Note that `*' is not necessary if defcustom is
Chong Yidong <cyd@stupidchicken.com>
parents:
98896
diff
changeset
|
467 If the documentation string begins with the character @samp{*}, Emacs |
d9a2d006b717
(Defining Variables): Note that `*' is not necessary if defcustom is
Chong Yidong <cyd@stupidchicken.com>
parents:
98896
diff
changeset
|
468 allows users to set it interactively using the @code{set-variable} |
d9a2d006b717
(Defining Variables): Note that `*' is not necessary if defcustom is
Chong Yidong <cyd@stupidchicken.com>
parents:
98896
diff
changeset
|
469 command. However, you should nearly always use @code{defcustom} |
d9a2d006b717
(Defining Variables): Note that `*' is not necessary if defcustom is
Chong Yidong <cyd@stupidchicken.com>
parents:
98896
diff
changeset
|
470 instead of @code{defvar} to define such variables, so that users can |
d9a2d006b717
(Defining Variables): Note that `*' is not necessary if defcustom is
Chong Yidong <cyd@stupidchicken.com>
parents:
98896
diff
changeset
|
471 use @kbd{M-x customize} and related commands to set them. In that |
d9a2d006b717
(Defining Variables): Note that `*' is not necessary if defcustom is
Chong Yidong <cyd@stupidchicken.com>
parents:
98896
diff
changeset
|
472 case, it is not necessary to begin the documentation string with |
d9a2d006b717
(Defining Variables): Note that `*' is not necessary if defcustom is
Chong Yidong <cyd@stupidchicken.com>
parents:
98896
diff
changeset
|
473 @samp{*}. @xref{Customization}. |
84109 | 474 |
475 Here are some examples. This form defines @code{foo} but does not | |
476 initialize it: | |
477 | |
478 @example | |
479 @group | |
480 (defvar foo) | |
481 @result{} foo | |
482 @end group | |
483 @end example | |
484 | |
485 This example initializes the value of @code{bar} to @code{23}, and gives | |
486 it a documentation string: | |
487 | |
488 @example | |
489 @group | |
490 (defvar bar 23 | |
491 "The normal weight of a bar.") | |
492 @result{} bar | |
493 @end group | |
494 @end example | |
495 | |
496 The following form changes the documentation string for @code{bar}, | |
497 making it a user option, but does not change the value, since @code{bar} | |
498 already has a value. (The addition @code{(1+ nil)} would get an error | |
499 if it were evaluated, but since it is not evaluated, there is no error.) | |
500 | |
501 @example | |
502 @group | |
503 (defvar bar (1+ nil) | |
504 "*The normal weight of a bar.") | |
505 @result{} bar | |
506 @end group | |
507 @group | |
508 bar | |
509 @result{} 23 | |
510 @end group | |
511 @end example | |
512 | |
513 Here is an equivalent expression for the @code{defvar} special form: | |
514 | |
515 @example | |
516 @group | |
517 (defvar @var{symbol} @var{value} @var{doc-string}) | |
518 @equiv{} | |
519 (progn | |
520 (if (not (boundp '@var{symbol})) | |
521 (setq @var{symbol} @var{value})) | |
522 (if '@var{doc-string} | |
523 (put '@var{symbol} 'variable-documentation '@var{doc-string})) | |
524 '@var{symbol}) | |
525 @end group | |
526 @end example | |
527 | |
528 The @code{defvar} form returns @var{symbol}, but it is normally used | |
529 at top level in a file where its value does not matter. | |
530 @end defspec | |
531 | |
105622
929678fafdb4
* variables.texi (Constant Variables): Distinguish from defconst
Chong Yidong <cyd@stupidchicken.com>
parents:
103456
diff
changeset
|
532 @cindex constant variables |
84109 | 533 @defspec defconst symbol value [doc-string] |
534 This special form defines @var{symbol} as a value and initializes it. | |
535 It informs a person reading your code that @var{symbol} has a standard | |
536 global value, established here, that should not be changed by the user | |
537 or by other programs. Note that @var{symbol} is not evaluated; the | |
538 symbol to be defined must appear explicitly in the @code{defconst}. | |
539 | |
540 @code{defconst} always evaluates @var{value}, and sets the value of | |
541 @var{symbol} to the result. If @var{symbol} does have a buffer-local | |
542 binding in the current buffer, @code{defconst} sets the default value, | |
543 not the buffer-local value. (But you should not be making | |
544 buffer-local bindings for a symbol that is defined with | |
545 @code{defconst}.) | |
546 | |
547 Here, @code{pi} is a constant that presumably ought not to be changed | |
548 by anyone (attempts by the Indiana State Legislature notwithstanding). | |
549 As the second form illustrates, however, this is only advisory. | |
550 | |
551 @example | |
552 @group | |
553 (defconst pi 3.1415 "Pi to five places.") | |
554 @result{} pi | |
555 @end group | |
556 @group | |
557 (setq pi 3) | |
558 @result{} pi | |
559 @end group | |
560 @group | |
561 pi | |
562 @result{} 3 | |
563 @end group | |
564 @end example | |
565 @end defspec | |
566 | |
567 @defun user-variable-p variable | |
568 @cindex user option | |
569 This function returns @code{t} if @var{variable} is a user option---a | |
570 variable intended to be set by the user for customization---and | |
571 @code{nil} otherwise. (Variables other than user options exist for the | |
572 internal purposes of Lisp programs, and users need not know about them.) | |
573 | |
574 User option variables are distinguished from other variables either | |
575 though being declared using @code{defcustom}@footnote{They may also be | |
576 declared equivalently in @file{cus-start.el}.} or by the first character | |
577 of their @code{variable-documentation} property. If the property exists | |
578 and is a string, and its first character is @samp{*}, then the variable | |
579 is a user option. Aliases of user options are also user options. | |
580 @end defun | |
581 | |
582 @kindex variable-interactive | |
583 If a user option variable has a @code{variable-interactive} property, | |
584 the @code{set-variable} command uses that value to control reading the | |
585 new value for the variable. The property's value is used as if it were | |
586 specified in @code{interactive} (@pxref{Using Interactive}). However, | |
587 this feature is largely obsoleted by @code{defcustom} | |
588 (@pxref{Customization}). | |
589 | |
590 @strong{Warning:} If the @code{defconst} and @code{defvar} special | |
591 forms are used while the variable has a local binding (made with | |
592 @code{let}, or a function argument), they set the local-binding's | |
593 value; the top-level binding is not changed. This is not what you | |
594 usually want. To prevent it, use these special forms at top level in | |
595 a file, where normally no local binding is in effect, and make sure to | |
596 load the file before making a local binding for the variable. | |
597 | |
598 @node Tips for Defining | |
599 @section Tips for Defining Variables Robustly | |
600 | |
601 When you define a variable whose value is a function, or a list of | |
602 functions, use a name that ends in @samp{-function} or | |
603 @samp{-functions}, respectively. | |
604 | |
605 There are several other variable name conventions; | |
606 here is a complete list: | |
607 | |
608 @table @samp | |
609 @item @dots{}-hook | |
610 The variable is a normal hook (@pxref{Hooks}). | |
611 | |
612 @item @dots{}-function | |
613 The value is a function. | |
614 | |
615 @item @dots{}-functions | |
616 The value is a list of functions. | |
617 | |
618 @item @dots{}-form | |
619 The value is a form (an expression). | |
620 | |
621 @item @dots{}-forms | |
622 The value is a list of forms (expressions). | |
623 | |
624 @item @dots{}-predicate | |
625 The value is a predicate---a function of one argument that returns | |
626 non-@code{nil} for ``good'' arguments and @code{nil} for ``bad'' | |
627 arguments. | |
628 | |
629 @item @dots{}-flag | |
630 The value is significant only as to whether it is @code{nil} or not. | |
101143
5a1ab0e91281
Qualify the `-flag' convention.
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
100974
diff
changeset
|
631 Since such variables often end up acquiring more values over time, |
101144 | 632 this convention is not strongly recommended. |
84109 | 633 |
634 @item @dots{}-program | |
635 The value is a program name. | |
636 | |
637 @item @dots{}-command | |
638 The value is a whole shell command. | |
639 | |
640 @item @dots{}-switches | |
641 The value specifies options for a command. | |
642 @end table | |
643 | |
644 When you define a variable, always consider whether you should mark | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
645 it as ``safe'' or ``risky''; see @ref{File Local Variables}. |
84109 | 646 |
647 When defining and initializing a variable that holds a complicated | |
648 value (such as a keymap with bindings in it), it's best to put the | |
649 entire computation of the value into the @code{defvar}, like this: | |
650 | |
651 @example | |
652 (defvar my-mode-map | |
653 (let ((map (make-sparse-keymap))) | |
654 (define-key map "\C-c\C-a" 'my-command) | |
655 @dots{} | |
656 map) | |
657 @var{docstring}) | |
658 @end example | |
659 | |
660 @noindent | |
661 This method has several benefits. First, if the user quits while | |
662 loading the file, the variable is either still uninitialized or | |
663 initialized properly, never in-between. If it is still uninitialized, | |
664 reloading the file will initialize it properly. Second, reloading the | |
665 file once the variable is initialized will not alter it; that is | |
666 important if the user has run hooks to alter part of the contents (such | |
667 as, to rebind keys). Third, evaluating the @code{defvar} form with | |
668 @kbd{C-M-x} @emph{will} reinitialize the map completely. | |
669 | |
670 Putting so much code in the @code{defvar} form has one disadvantage: | |
671 it puts the documentation string far away from the line which names the | |
672 variable. Here's a safe way to avoid that: | |
673 | |
674 @example | |
675 (defvar my-mode-map nil | |
676 @var{docstring}) | |
677 (unless my-mode-map | |
678 (let ((map (make-sparse-keymap))) | |
679 (define-key map "\C-c\C-a" 'my-command) | |
680 @dots{} | |
681 (setq my-mode-map map))) | |
682 @end example | |
683 | |
684 @noindent | |
685 This has all the same advantages as putting the initialization inside | |
686 the @code{defvar}, except that you must type @kbd{C-M-x} twice, once on | |
687 each form, if you do want to reinitialize the variable. | |
688 | |
689 But be careful not to write the code like this: | |
690 | |
691 @example | |
692 (defvar my-mode-map nil | |
693 @var{docstring}) | |
694 (unless my-mode-map | |
695 (setq my-mode-map (make-sparse-keymap)) | |
696 (define-key my-mode-map "\C-c\C-a" 'my-command) | |
697 @dots{}) | |
698 @end example | |
699 | |
700 @noindent | |
701 This code sets the variable, then alters it, but it does so in more than | |
702 one step. If the user quits just after the @code{setq}, that leaves the | |
703 variable neither correctly initialized nor void nor @code{nil}. Once | |
704 that happens, reloading the file will not initialize the variable; it | |
705 will remain incomplete. | |
706 | |
707 @node Accessing Variables | |
708 @section Accessing Variable Values | |
709 | |
710 The usual way to reference a variable is to write the symbol which | |
711 names it (@pxref{Symbol Forms}). This requires you to specify the | |
712 variable name when you write the program. Usually that is exactly what | |
713 you want to do. Occasionally you need to choose at run time which | |
714 variable to reference; then you can use @code{symbol-value}. | |
715 | |
716 @defun symbol-value symbol | |
717 This function returns the value of @var{symbol}. This is the value in | |
718 the innermost local binding of the symbol, or its global value if it | |
719 has no local bindings. | |
720 | |
721 @example | |
722 @group | |
723 (setq abracadabra 5) | |
724 @result{} 5 | |
725 @end group | |
726 @group | |
727 (setq foo 9) | |
728 @result{} 9 | |
729 @end group | |
730 | |
731 @group | |
732 ;; @r{Here the symbol @code{abracadabra}} | |
733 ;; @r{is the symbol whose value is examined.} | |
734 (let ((abracadabra 'foo)) | |
735 (symbol-value 'abracadabra)) | |
736 @result{} foo | |
737 @end group | |
738 | |
739 @group | |
740 ;; @r{Here, the value of @code{abracadabra},} | |
741 ;; @r{which is @code{foo},} | |
742 ;; @r{is the symbol whose value is examined.} | |
743 (let ((abracadabra 'foo)) | |
744 (symbol-value abracadabra)) | |
745 @result{} 9 | |
746 @end group | |
747 | |
748 @group | |
749 (symbol-value 'abracadabra) | |
750 @result{} 5 | |
751 @end group | |
752 @end example | |
753 | |
754 A @code{void-variable} error is signaled if the current binding of | |
755 @var{symbol} is void. | |
756 @end defun | |
757 | |
758 @node Setting Variables | |
759 @section How to Alter a Variable Value | |
760 | |
761 The usual way to change the value of a variable is with the special | |
762 form @code{setq}. When you need to compute the choice of variable at | |
763 run time, use the function @code{set}. | |
764 | |
765 @defspec setq [symbol form]@dots{} | |
766 This special form is the most common method of changing a variable's | |
767 value. Each @var{symbol} is given a new value, which is the result of | |
768 evaluating the corresponding @var{form}. The most-local existing | |
769 binding of the symbol is changed. | |
770 | |
771 @code{setq} does not evaluate @var{symbol}; it sets the symbol that you | |
772 write. We say that this argument is @dfn{automatically quoted}. The | |
773 @samp{q} in @code{setq} stands for ``quoted.'' | |
774 | |
775 The value of the @code{setq} form is the value of the last @var{form}. | |
776 | |
777 @example | |
778 @group | |
779 (setq x (1+ 2)) | |
780 @result{} 3 | |
781 @end group | |
782 x ; @r{@code{x} now has a global value.} | |
783 @result{} 3 | |
784 @group | |
785 (let ((x 5)) | |
786 (setq x 6) ; @r{The local binding of @code{x} is set.} | |
787 x) | |
788 @result{} 6 | |
789 @end group | |
790 x ; @r{The global value is unchanged.} | |
791 @result{} 3 | |
792 @end example | |
793 | |
794 Note that the first @var{form} is evaluated, then the first | |
795 @var{symbol} is set, then the second @var{form} is evaluated, then the | |
796 second @var{symbol} is set, and so on: | |
797 | |
798 @example | |
799 @group | |
800 (setq x 10 ; @r{Notice that @code{x} is set before} | |
801 y (1+ x)) ; @r{the value of @code{y} is computed.} | |
802 @result{} 11 | |
803 @end group | |
804 @end example | |
805 @end defspec | |
806 | |
807 @defun set symbol value | |
808 This function sets @var{symbol}'s value to @var{value}, then returns | |
809 @var{value}. Since @code{set} is a function, the expression written for | |
810 @var{symbol} is evaluated to obtain the symbol to set. | |
811 | |
812 The most-local existing binding of the variable is the binding that is | |
813 set; shadowed bindings are not affected. | |
814 | |
815 @example | |
816 @group | |
817 (set one 1) | |
818 @error{} Symbol's value as variable is void: one | |
819 @end group | |
820 @group | |
821 (set 'one 1) | |
822 @result{} 1 | |
823 @end group | |
824 @group | |
825 (set 'two 'one) | |
826 @result{} one | |
827 @end group | |
828 @group | |
829 (set two 2) ; @r{@code{two} evaluates to symbol @code{one}.} | |
830 @result{} 2 | |
831 @end group | |
832 @group | |
833 one ; @r{So it is @code{one} that was set.} | |
834 @result{} 2 | |
835 (let ((one 1)) ; @r{This binding of @code{one} is set,} | |
836 (set 'one 3) ; @r{not the global value.} | |
837 one) | |
838 @result{} 3 | |
839 @end group | |
840 @group | |
841 one | |
842 @result{} 2 | |
843 @end group | |
844 @end example | |
845 | |
846 If @var{symbol} is not actually a symbol, a @code{wrong-type-argument} | |
847 error is signaled. | |
848 | |
849 @example | |
850 (set '(x y) 'z) | |
851 @error{} Wrong type argument: symbolp, (x y) | |
852 @end example | |
853 | |
854 Logically speaking, @code{set} is a more fundamental primitive than | |
855 @code{setq}. Any use of @code{setq} can be trivially rewritten to use | |
856 @code{set}; @code{setq} could even be defined as a macro, given the | |
857 availability of @code{set}. However, @code{set} itself is rarely used; | |
858 beginners hardly need to know about it. It is useful only for choosing | |
859 at run time which variable to set. For example, the command | |
860 @code{set-variable}, which reads a variable name from the user and then | |
861 sets the variable, needs to use @code{set}. | |
862 | |
863 @cindex CL note---@code{set} local | |
864 @quotation | |
865 @b{Common Lisp note:} In Common Lisp, @code{set} always changes the | |
866 symbol's ``special'' or dynamic value, ignoring any lexical bindings. | |
867 In Emacs Lisp, all variables and all bindings are dynamic, so @code{set} | |
868 always affects the most local existing binding. | |
869 @end quotation | |
870 @end defun | |
871 | |
872 @node Variable Scoping | |
873 @section Scoping Rules for Variable Bindings | |
874 | |
875 A given symbol @code{foo} can have several local variable bindings, | |
876 established at different places in the Lisp program, as well as a global | |
877 binding. The most recently established binding takes precedence over | |
878 the others. | |
879 | |
880 @cindex scope | |
881 @cindex extent | |
882 @cindex dynamic scoping | |
883 @cindex lexical scoping | |
884 Local bindings in Emacs Lisp have @dfn{indefinite scope} and | |
885 @dfn{dynamic extent}. @dfn{Scope} refers to @emph{where} textually in | |
886 the source code the binding can be accessed. ``Indefinite scope'' means | |
887 that any part of the program can potentially access the variable | |
888 binding. @dfn{Extent} refers to @emph{when}, as the program is | |
889 executing, the binding exists. ``Dynamic extent'' means that the binding | |
890 lasts as long as the activation of the construct that established it. | |
891 | |
892 The combination of dynamic extent and indefinite scope is called | |
893 @dfn{dynamic scoping}. By contrast, most programming languages use | |
894 @dfn{lexical scoping}, in which references to a local variable must be | |
895 located textually within the function or block that binds the variable. | |
896 | |
897 @cindex CL note---special variables | |
898 @quotation | |
899 @b{Common Lisp note:} Variables declared ``special'' in Common Lisp are | |
900 dynamically scoped, like all variables in Emacs Lisp. | |
901 @end quotation | |
902 | |
903 @menu | |
904 * Scope:: Scope means where in the program a value is visible. | |
905 Comparison with other languages. | |
906 * Extent:: Extent means how long in time a value exists. | |
907 * Impl of Scope:: Two ways to implement dynamic scoping. | |
908 * Using Scoping:: How to use dynamic scoping carefully and avoid problems. | |
909 @end menu | |
910 | |
911 @node Scope | |
912 @subsection Scope | |
913 | |
914 Emacs Lisp uses @dfn{indefinite scope} for local variable bindings. | |
915 This means that any function anywhere in the program text might access a | |
916 given binding of a variable. Consider the following function | |
917 definitions: | |
918 | |
919 @example | |
920 @group | |
921 (defun binder (x) ; @r{@code{x} is bound in @code{binder}.} | |
922 (foo 5)) ; @r{@code{foo} is some other function.} | |
923 @end group | |
924 | |
925 @group | |
926 (defun user () ; @r{@code{x} is used ``free'' in @code{user}.} | |
927 (list x)) | |
928 @end group | |
929 @end example | |
930 | |
931 In a lexically scoped language, the binding of @code{x} in | |
932 @code{binder} would never be accessible in @code{user}, because | |
933 @code{user} is not textually contained within the function | |
934 @code{binder}. However, in dynamically-scoped Emacs Lisp, @code{user} | |
935 may or may not refer to the binding of @code{x} established in | |
936 @code{binder}, depending on the circumstances: | |
937 | |
938 @itemize @bullet | |
939 @item | |
940 If we call @code{user} directly without calling @code{binder} at all, | |
941 then whatever binding of @code{x} is found, it cannot come from | |
942 @code{binder}. | |
943 | |
944 @item | |
945 If we define @code{foo} as follows and then call @code{binder}, then the | |
946 binding made in @code{binder} will be seen in @code{user}: | |
947 | |
948 @example | |
949 @group | |
950 (defun foo (lose) | |
951 (user)) | |
952 @end group | |
953 @end example | |
954 | |
955 @item | |
956 However, if we define @code{foo} as follows and then call @code{binder}, | |
957 then the binding made in @code{binder} @emph{will not} be seen in | |
958 @code{user}: | |
959 | |
960 @example | |
961 (defun foo (x) | |
962 (user)) | |
963 @end example | |
964 | |
965 @noindent | |
966 Here, when @code{foo} is called by @code{binder}, it binds @code{x}. | |
967 (The binding in @code{foo} is said to @dfn{shadow} the one made in | |
968 @code{binder}.) Therefore, @code{user} will access the @code{x} bound | |
969 by @code{foo} instead of the one bound by @code{binder}. | |
970 @end itemize | |
971 | |
972 Emacs Lisp uses dynamic scoping because simple implementations of | |
973 lexical scoping are slow. In addition, every Lisp system needs to offer | |
974 dynamic scoping at least as an option; if lexical scoping is the norm, | |
975 there must be a way to specify dynamic scoping instead for a particular | |
976 variable. It might not be a bad thing for Emacs to offer both, but | |
977 implementing it with dynamic scoping only was much easier. | |
978 | |
979 @node Extent | |
980 @subsection Extent | |
981 | |
982 @dfn{Extent} refers to the time during program execution that a | |
983 variable name is valid. In Emacs Lisp, a variable is valid only while | |
984 the form that bound it is executing. This is called @dfn{dynamic | |
985 extent}. ``Local'' or ``automatic'' variables in most languages, | |
986 including C and Pascal, have dynamic extent. | |
987 | |
988 One alternative to dynamic extent is @dfn{indefinite extent}. This | |
989 means that a variable binding can live on past the exit from the form | |
990 that made the binding. Common Lisp and Scheme, for example, support | |
991 this, but Emacs Lisp does not. | |
992 | |
993 To illustrate this, the function below, @code{make-add}, returns a | |
994 function that purports to add @var{n} to its own argument @var{m}. This | |
995 would work in Common Lisp, but it does not do the job in Emacs Lisp, | |
996 because after the call to @code{make-add} exits, the variable @code{n} | |
997 is no longer bound to the actual argument 2. | |
998 | |
999 @example | |
1000 (defun make-add (n) | |
1001 (function (lambda (m) (+ n m)))) ; @r{Return a function.} | |
1002 @result{} make-add | |
1003 (fset 'add2 (make-add 2)) ; @r{Define function @code{add2}} | |
1004 ; @r{with @code{(make-add 2)}.} | |
1005 @result{} (lambda (m) (+ n m)) | |
1006 (add2 4) ; @r{Try to add 2 to 4.} | |
1007 @error{} Symbol's value as variable is void: n | |
1008 @end example | |
1009 | |
1010 @cindex closures not available | |
1011 Some Lisp dialects have ``closures,'' objects that are like functions | |
1012 but record additional variable bindings. Emacs Lisp does not have | |
1013 closures. | |
1014 | |
1015 @node Impl of Scope | |
1016 @subsection Implementation of Dynamic Scoping | |
1017 @cindex deep binding | |
1018 | |
1019 A simple sample implementation (which is not how Emacs Lisp actually | |
1020 works) may help you understand dynamic binding. This technique is | |
1021 called @dfn{deep binding} and was used in early Lisp systems. | |
1022 | |
1023 Suppose there is a stack of bindings, which are variable-value pairs. | |
1024 At entry to a function or to a @code{let} form, we can push bindings | |
1025 onto the stack for the arguments or local variables created there. We | |
1026 can pop those bindings from the stack at exit from the binding | |
1027 construct. | |
1028 | |
1029 We can find the value of a variable by searching the stack from top to | |
1030 bottom for a binding for that variable; the value from that binding is | |
1031 the value of the variable. To set the variable, we search for the | |
1032 current binding, then store the new value into that binding. | |
1033 | |
1034 As you can see, a function's bindings remain in effect as long as it | |
1035 continues execution, even during its calls to other functions. That is | |
1036 why we say the extent of the binding is dynamic. And any other function | |
1037 can refer to the bindings, if it uses the same variables while the | |
1038 bindings are in effect. That is why we say the scope is indefinite. | |
1039 | |
1040 @cindex shallow binding | |
1041 The actual implementation of variable scoping in GNU Emacs Lisp uses a | |
1042 technique called @dfn{shallow binding}. Each variable has a standard | |
1043 place in which its current value is always found---the value cell of the | |
1044 symbol. | |
1045 | |
1046 In shallow binding, setting the variable works by storing a value in | |
1047 the value cell. Creating a new binding works by pushing the old value | |
1048 (belonging to a previous binding) onto a stack, and storing the new | |
1049 local value in the value cell. Eliminating a binding works by popping | |
1050 the old value off the stack, into the value cell. | |
1051 | |
1052 We use shallow binding because it has the same results as deep | |
1053 binding, but runs faster, since there is never a need to search for a | |
1054 binding. | |
1055 | |
1056 @node Using Scoping | |
1057 @subsection Proper Use of Dynamic Scoping | |
1058 | |
1059 Binding a variable in one function and using it in another is a | |
1060 powerful technique, but if used without restraint, it can make programs | |
1061 hard to understand. There are two clean ways to use this technique: | |
1062 | |
1063 @itemize @bullet | |
1064 @item | |
1065 Use or bind the variable only in a few related functions, written close | |
1066 together in one file. Such a variable is used for communication within | |
1067 one program. | |
1068 | |
1069 You should write comments to inform other programmers that they can see | |
1070 all uses of the variable before them, and to advise them not to add uses | |
1071 elsewhere. | |
1072 | |
1073 @item | |
1074 Give the variable a well-defined, documented meaning, and make all | |
1075 appropriate functions refer to it (but not bind it or set it) wherever | |
1076 that meaning is relevant. For example, the variable | |
1077 @code{case-fold-search} is defined as ``non-@code{nil} means ignore case | |
1078 when searching''; various search and replace functions refer to it | |
1079 directly or through their subroutines, but do not bind or set it. | |
1080 | |
1081 Then you can bind the variable in other programs, knowing reliably what | |
1082 the effect will be. | |
1083 @end itemize | |
1084 | |
1085 In either case, you should define the variable with @code{defvar}. | |
1086 This helps other people understand your program by telling them to look | |
1087 for inter-function usage. It also avoids a warning from the byte | |
1088 compiler. Choose the variable's name to avoid name conflicts---don't | |
1089 use short names like @code{x}. | |
1090 | |
1091 @node Buffer-Local Variables | |
1092 @section Buffer-Local Variables | |
1093 @cindex variable, buffer-local | |
1094 @cindex buffer-local variables | |
1095 | |
1096 Global and local variable bindings are found in most programming | |
85688 | 1097 languages in one form or another. Emacs, however, also supports |
1098 additional, unusual kinds of variable binding, such as | |
1099 @dfn{buffer-local} bindings, which apply only in one buffer. Having | |
1100 different values for a variable in different buffers is an important | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1101 customization method. (Variables can also have bindings that are |
102846
a447859a557b
* frames.texi (Frames): Clean up introduction. Document `ns'
Chong Yidong <cyd@stupidchicken.com>
parents:
102306
diff
changeset
|
1102 local to each terminal, or to each frame. @xref{Multiple Terminals}, |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1103 and @xref{Frame-Local Variables}.) |
84109 | 1104 |
1105 @menu | |
1106 * Intro to Buffer-Local:: Introduction and concepts. | |
1107 * Creating Buffer-Local:: Creating and destroying buffer-local bindings. | |
1108 * Default Value:: The default value is seen in buffers | |
1109 that don't have their own buffer-local values. | |
1110 @end menu | |
1111 | |
1112 @node Intro to Buffer-Local | |
1113 @subsection Introduction to Buffer-Local Variables | |
1114 | |
1115 A buffer-local variable has a buffer-local binding associated with a | |
1116 particular buffer. The binding is in effect when that buffer is | |
1117 current; otherwise, it is not in effect. If you set the variable while | |
1118 a buffer-local binding is in effect, the new value goes in that binding, | |
1119 so its other bindings are unchanged. This means that the change is | |
1120 visible only in the buffer where you made it. | |
1121 | |
1122 The variable's ordinary binding, which is not associated with any | |
1123 specific buffer, is called the @dfn{default binding}. In most cases, | |
1124 this is the global binding. | |
1125 | |
1126 A variable can have buffer-local bindings in some buffers but not in | |
1127 other buffers. The default binding is shared by all the buffers that | |
1128 don't have their own bindings for the variable. (This includes all | |
1129 newly-created buffers.) If you set the variable in a buffer that does | |
85688 | 1130 not have a buffer-local binding for it, this sets the default binding, |
84109 | 1131 so the new value is visible in all the buffers that see the default |
1132 binding. | |
1133 | |
1134 The most common use of buffer-local bindings is for major modes to change | |
1135 variables that control the behavior of commands. For example, C mode and | |
1136 Lisp mode both set the variable @code{paragraph-start} to specify that only | |
1137 blank lines separate paragraphs. They do this by making the variable | |
1138 buffer-local in the buffer that is being put into C mode or Lisp mode, and | |
1139 then setting it to the new value for that mode. @xref{Major Modes}. | |
1140 | |
1141 The usual way to make a buffer-local binding is with | |
1142 @code{make-local-variable}, which is what major mode commands typically | |
1143 use. This affects just the current buffer; all other buffers (including | |
1144 those yet to be created) will continue to share the default value unless | |
1145 they are explicitly given their own buffer-local bindings. | |
1146 | |
1147 @cindex automatically buffer-local | |
1148 A more powerful operation is to mark the variable as | |
1149 @dfn{automatically buffer-local} by calling | |
1150 @code{make-variable-buffer-local}. You can think of this as making the | |
1151 variable local in all buffers, even those yet to be created. More | |
1152 precisely, the effect is that setting the variable automatically makes | |
1153 the variable local to the current buffer if it is not already so. All | |
1154 buffers start out by sharing the default value of the variable as usual, | |
1155 but setting the variable creates a buffer-local binding for the current | |
1156 buffer. The new value is stored in the buffer-local binding, leaving | |
1157 the default binding untouched. This means that the default value cannot | |
1158 be changed with @code{setq} in any buffer; the only way to change it is | |
1159 with @code{setq-default}. | |
1160 | |
85688 | 1161 @strong{Warning:} When a variable has buffer-local |
84109 | 1162 bindings in one or more buffers, @code{let} rebinds the binding that's |
1163 currently in effect. For instance, if the current buffer has a | |
1164 buffer-local value, @code{let} temporarily rebinds that. If no | |
85688 | 1165 buffer-local bindings are in effect, @code{let} rebinds |
84109 | 1166 the default value. If inside the @code{let} you then change to a |
1167 different current buffer in which a different binding is in effect, | |
1168 you won't see the @code{let} binding any more. And if you exit the | |
1169 @code{let} while still in the other buffer, you won't see the | |
1170 unbinding occur (though it will occur properly). Here is an example | |
1171 to illustrate: | |
1172 | |
1173 @example | |
1174 @group | |
1175 (setq foo 'g) | |
1176 (set-buffer "a") | |
1177 (make-local-variable 'foo) | |
1178 @end group | |
1179 (setq foo 'a) | |
1180 (let ((foo 'temp)) | |
1181 ;; foo @result{} 'temp ; @r{let binding in buffer @samp{a}} | |
1182 (set-buffer "b") | |
1183 ;; foo @result{} 'g ; @r{the global value since foo is not local in @samp{b}} | |
1184 @var{body}@dots{}) | |
1185 @group | |
1186 foo @result{} 'g ; @r{exiting restored the local value in buffer @samp{a},} | |
1187 ; @r{but we don't see that in buffer @samp{b}} | |
1188 @end group | |
1189 @group | |
1190 (set-buffer "a") ; @r{verify the local value was restored} | |
1191 foo @result{} 'a | |
1192 @end group | |
1193 @end example | |
1194 | |
1195 Note that references to @code{foo} in @var{body} access the | |
1196 buffer-local binding of buffer @samp{b}. | |
1197 | |
1198 When a file specifies local variable values, these become buffer-local | |
1199 values when you visit the file. @xref{File Variables,,, emacs, The | |
1200 GNU Emacs Manual}. | |
1201 | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1202 A buffer-local variable cannot be made frame-local |
98680
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1203 (@pxref{Frame-Local Variables}) or terminal-local (@pxref{Multiple |
102846
a447859a557b
* frames.texi (Frames): Clean up introduction. Document `ns'
Chong Yidong <cyd@stupidchicken.com>
parents:
102306
diff
changeset
|
1204 Terminals}). |
98680
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1205 |
84109 | 1206 @node Creating Buffer-Local |
1207 @subsection Creating and Deleting Buffer-Local Bindings | |
1208 | |
1209 @deffn Command make-local-variable variable | |
1210 This function creates a buffer-local binding in the current buffer for | |
1211 @var{variable} (a symbol). Other buffers are not affected. The value | |
1212 returned is @var{variable}. | |
1213 | |
1214 The buffer-local value of @var{variable} starts out as the same value | |
1215 @var{variable} previously had. If @var{variable} was void, it remains | |
1216 void. | |
1217 | |
1218 @example | |
1219 @group | |
1220 ;; @r{In buffer @samp{b1}:} | |
1221 (setq foo 5) ; @r{Affects all buffers.} | |
1222 @result{} 5 | |
1223 @end group | |
1224 @group | |
1225 (make-local-variable 'foo) ; @r{Now it is local in @samp{b1}.} | |
1226 @result{} foo | |
1227 @end group | |
1228 @group | |
1229 foo ; @r{That did not change} | |
1230 @result{} 5 ; @r{the value.} | |
1231 @end group | |
1232 @group | |
1233 (setq foo 6) ; @r{Change the value} | |
1234 @result{} 6 ; @r{in @samp{b1}.} | |
1235 @end group | |
1236 @group | |
1237 foo | |
1238 @result{} 6 | |
1239 @end group | |
1240 | |
1241 @group | |
1242 ;; @r{In buffer @samp{b2}, the value hasn't changed.} | |
106731
79fa2d910b72
Avoid dubious uses of save-excursions.
Stefan Monnier <monnier@iro.umontreal.ca>
parents:
105622
diff
changeset
|
1243 (with-current-buffer "b2" |
84109 | 1244 foo) |
1245 @result{} 5 | |
1246 @end group | |
1247 @end example | |
1248 | |
1249 Making a variable buffer-local within a @code{let}-binding for that | |
1250 variable does not work reliably, unless the buffer in which you do this | |
1251 is not current either on entry to or exit from the @code{let}. This is | |
1252 because @code{let} does not distinguish between different kinds of | |
1253 bindings; it knows only which variable the binding was made for. | |
1254 | |
102846
a447859a557b
* frames.texi (Frames): Clean up introduction. Document `ns'
Chong Yidong <cyd@stupidchicken.com>
parents:
102306
diff
changeset
|
1255 If the variable is terminal-local (@pxref{Multiple Terminals}), or |
98680
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1256 frame-local (@pxref{Frame-Local Variables}), this function signals an |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1257 error. Such variables cannot have buffer-local bindings as well. |
84109 | 1258 |
1259 @strong{Warning:} do not use @code{make-local-variable} for a hook | |
1260 variable. The hook variables are automatically made buffer-local as | |
1261 needed if you use the @var{local} argument to @code{add-hook} or | |
1262 @code{remove-hook}. | |
1263 @end deffn | |
1264 | |
1265 @deffn Command make-variable-buffer-local variable | |
1266 This function marks @var{variable} (a symbol) automatically | |
1267 buffer-local, so that any subsequent attempt to set it will make it | |
1268 local to the current buffer at the time. | |
1269 | |
1270 A peculiar wrinkle of this feature is that binding the variable (with | |
1271 @code{let} or other binding constructs) does not create a buffer-local | |
1272 binding for it. Only setting the variable (with @code{set} or | |
1273 @code{setq}), while the variable does not have a @code{let}-style | |
1274 binding that was made in the current buffer, does so. | |
1275 | |
1276 If @var{variable} does not have a default value, then calling this | |
1277 command will give it a default value of @code{nil}. If @var{variable} | |
1278 already has a default value, that value remains unchanged. | |
1279 Subsequently calling @code{makunbound} on @var{variable} will result | |
1280 in a void buffer-local value and leave the default value unaffected. | |
1281 | |
1282 The value returned is @var{variable}. | |
1283 | |
1284 @strong{Warning:} Don't assume that you should use | |
1285 @code{make-variable-buffer-local} for user-option variables, simply | |
1286 because users @emph{might} want to customize them differently in | |
1287 different buffers. Users can make any variable local, when they wish | |
1288 to. It is better to leave the choice to them. | |
1289 | |
1290 The time to use @code{make-variable-buffer-local} is when it is crucial | |
1291 that no two buffers ever share the same binding. For example, when a | |
1292 variable is used for internal purposes in a Lisp program which depends | |
1293 on having separate values in separate buffers, then using | |
1294 @code{make-variable-buffer-local} can be the best solution. | |
1295 @end deffn | |
1296 | |
1297 @defun local-variable-p variable &optional buffer | |
1298 This returns @code{t} if @var{variable} is buffer-local in buffer | |
1299 @var{buffer} (which defaults to the current buffer); otherwise, | |
1300 @code{nil}. | |
1301 @end defun | |
1302 | |
1303 @defun local-variable-if-set-p variable &optional buffer | |
1304 This returns @code{t} if @var{variable} will become buffer-local in | |
1305 buffer @var{buffer} (which defaults to the current buffer) if it is | |
1306 set there. | |
1307 @end defun | |
1308 | |
1309 @defun buffer-local-value variable buffer | |
1310 This function returns the buffer-local binding of @var{variable} (a | |
1311 symbol) in buffer @var{buffer}. If @var{variable} does not have a | |
1312 buffer-local binding in buffer @var{buffer}, it returns the default | |
1313 value (@pxref{Default Value}) of @var{variable} instead. | |
1314 @end defun | |
1315 | |
1316 @defun buffer-local-variables &optional buffer | |
1317 This function returns a list describing the buffer-local variables in | |
1318 buffer @var{buffer}. (If @var{buffer} is omitted, the current buffer is | |
1319 used.) It returns an association list (@pxref{Association Lists}) in | |
1320 which each element contains one buffer-local variable and its value. | |
1321 However, when a variable's buffer-local binding in @var{buffer} is void, | |
1322 then the variable appears directly in the resulting list. | |
1323 | |
1324 @example | |
1325 @group | |
1326 (make-local-variable 'foobar) | |
1327 (makunbound 'foobar) | |
1328 (make-local-variable 'bind-me) | |
1329 (setq bind-me 69) | |
1330 @end group | |
1331 (setq lcl (buffer-local-variables)) | |
1332 ;; @r{First, built-in variables local in all buffers:} | |
1333 @result{} ((mark-active . nil) | |
1334 (buffer-undo-list . nil) | |
1335 (mode-name . "Fundamental") | |
1336 @dots{} | |
1337 @group | |
1338 ;; @r{Next, non-built-in buffer-local variables.} | |
1339 ;; @r{This one is buffer-local and void:} | |
1340 foobar | |
1341 ;; @r{This one is buffer-local and nonvoid:} | |
1342 (bind-me . 69)) | |
1343 @end group | |
1344 @end example | |
1345 | |
1346 Note that storing new values into the @sc{cdr}s of cons cells in this | |
1347 list does @emph{not} change the buffer-local values of the variables. | |
1348 @end defun | |
1349 | |
1350 @deffn Command kill-local-variable variable | |
1351 This function deletes the buffer-local binding (if any) for | |
1352 @var{variable} (a symbol) in the current buffer. As a result, the | |
1353 default binding of @var{variable} becomes visible in this buffer. This | |
1354 typically results in a change in the value of @var{variable}, since the | |
1355 default value is usually different from the buffer-local value just | |
1356 eliminated. | |
1357 | |
1358 If you kill the buffer-local binding of a variable that automatically | |
1359 becomes buffer-local when set, this makes the default value visible in | |
1360 the current buffer. However, if you set the variable again, that will | |
1361 once again create a buffer-local binding for it. | |
1362 | |
1363 @code{kill-local-variable} returns @var{variable}. | |
1364 | |
1365 This function is a command because it is sometimes useful to kill one | |
1366 buffer-local variable interactively, just as it is useful to create | |
1367 buffer-local variables interactively. | |
1368 @end deffn | |
1369 | |
1370 @defun kill-all-local-variables | |
1371 This function eliminates all the buffer-local variable bindings of the | |
98734
f20cbcf45bb3
(Creating Buffer-Local): Add an xref to "Setting Hooks" for the effect
Eli Zaretskii <eliz@gnu.org>
parents:
98680
diff
changeset
|
1372 current buffer except for variables marked as ``permanent'' and local |
f20cbcf45bb3
(Creating Buffer-Local): Add an xref to "Setting Hooks" for the effect
Eli Zaretskii <eliz@gnu.org>
parents:
98680
diff
changeset
|
1373 hook functions that have a non-@code{nil} @code{permanent-local-hook} |
f20cbcf45bb3
(Creating Buffer-Local): Add an xref to "Setting Hooks" for the effect
Eli Zaretskii <eliz@gnu.org>
parents:
98680
diff
changeset
|
1374 property (@pxref{Setting Hooks}). As a result, the buffer will see |
f20cbcf45bb3
(Creating Buffer-Local): Add an xref to "Setting Hooks" for the effect
Eli Zaretskii <eliz@gnu.org>
parents:
98680
diff
changeset
|
1375 the default values of most variables. |
84109 | 1376 |
1377 This function also resets certain other information pertaining to the | |
1378 buffer: it sets the local keymap to @code{nil}, the syntax table to the | |
1379 value of @code{(standard-syntax-table)}, the case table to | |
1380 @code{(standard-case-table)}, and the abbrev table to the value of | |
1381 @code{fundamental-mode-abbrev-table}. | |
1382 | |
1383 The very first thing this function does is run the normal hook | |
1384 @code{change-major-mode-hook} (see below). | |
1385 | |
1386 Every major mode command begins by calling this function, which has the | |
1387 effect of switching to Fundamental mode and erasing most of the effects | |
1388 of the previous major mode. To ensure that this does its job, the | |
1389 variables that major modes set should not be marked permanent. | |
1390 | |
1391 @code{kill-all-local-variables} returns @code{nil}. | |
1392 @end defun | |
1393 | |
1394 @defvar change-major-mode-hook | |
1395 The function @code{kill-all-local-variables} runs this normal hook | |
1396 before it does anything else. This gives major modes a way to arrange | |
1397 for something special to be done if the user switches to a different | |
1398 major mode. It is also useful for buffer-specific minor modes | |
1399 that should be forgotten if the user changes the major mode. | |
1400 | |
1401 For best results, make this variable buffer-local, so that it will | |
1402 disappear after doing its job and will not interfere with the | |
1403 subsequent major mode. @xref{Hooks}. | |
1404 @end defvar | |
1405 | |
1406 @c Emacs 19 feature | |
1407 @cindex permanent local variable | |
1408 A buffer-local variable is @dfn{permanent} if the variable name (a | |
1409 symbol) has a @code{permanent-local} property that is non-@code{nil}. | |
1410 Permanent locals are appropriate for data pertaining to where the file | |
1411 came from or how to save it, rather than with how to edit the contents. | |
1412 | |
1413 @node Default Value | |
1414 @subsection The Default Value of a Buffer-Local Variable | |
1415 @cindex default value | |
1416 | |
1417 The global value of a variable with buffer-local bindings is also | |
1418 called the @dfn{default} value, because it is the value that is in | |
1419 effect whenever neither the current buffer nor the selected frame has | |
1420 its own binding for the variable. | |
1421 | |
1422 The functions @code{default-value} and @code{setq-default} access and | |
1423 change a variable's default value regardless of whether the current | |
1424 buffer has a buffer-local binding. For example, you could use | |
1425 @code{setq-default} to change the default setting of | |
1426 @code{paragraph-start} for most buffers; and this would work even when | |
1427 you are in a C or Lisp mode buffer that has a buffer-local value for | |
1428 this variable. | |
1429 | |
1430 @c Emacs 19 feature | |
1431 The special forms @code{defvar} and @code{defconst} also set the | |
1432 default value (if they set the variable at all), rather than any | |
85688 | 1433 buffer-local value. |
84109 | 1434 |
1435 @defun default-value symbol | |
1436 This function returns @var{symbol}'s default value. This is the value | |
1437 that is seen in buffers and frames that do not have their own values for | |
1438 this variable. If @var{symbol} is not buffer-local, this is equivalent | |
1439 to @code{symbol-value} (@pxref{Accessing Variables}). | |
1440 @end defun | |
1441 | |
1442 @c Emacs 19 feature | |
1443 @defun default-boundp symbol | |
1444 The function @code{default-boundp} tells you whether @var{symbol}'s | |
1445 default value is nonvoid. If @code{(default-boundp 'foo)} returns | |
1446 @code{nil}, then @code{(default-value 'foo)} would get an error. | |
1447 | |
1448 @code{default-boundp} is to @code{default-value} as @code{boundp} is to | |
1449 @code{symbol-value}. | |
1450 @end defun | |
1451 | |
1452 @defspec setq-default [symbol form]@dots{} | |
1453 This special form gives each @var{symbol} a new default value, which is | |
1454 the result of evaluating the corresponding @var{form}. It does not | |
1455 evaluate @var{symbol}, but does evaluate @var{form}. The value of the | |
1456 @code{setq-default} form is the value of the last @var{form}. | |
1457 | |
1458 If a @var{symbol} is not buffer-local for the current buffer, and is not | |
1459 marked automatically buffer-local, @code{setq-default} has the same | |
1460 effect as @code{setq}. If @var{symbol} is buffer-local for the current | |
1461 buffer, then this changes the value that other buffers will see (as long | |
1462 as they don't have a buffer-local value), but not the value that the | |
1463 current buffer sees. | |
1464 | |
1465 @example | |
1466 @group | |
1467 ;; @r{In buffer @samp{foo}:} | |
1468 (make-local-variable 'buffer-local) | |
1469 @result{} buffer-local | |
1470 @end group | |
1471 @group | |
1472 (setq buffer-local 'value-in-foo) | |
1473 @result{} value-in-foo | |
1474 @end group | |
1475 @group | |
1476 (setq-default buffer-local 'new-default) | |
1477 @result{} new-default | |
1478 @end group | |
1479 @group | |
1480 buffer-local | |
1481 @result{} value-in-foo | |
1482 @end group | |
1483 @group | |
1484 (default-value 'buffer-local) | |
1485 @result{} new-default | |
1486 @end group | |
1487 | |
1488 @group | |
1489 ;; @r{In (the new) buffer @samp{bar}:} | |
1490 buffer-local | |
1491 @result{} new-default | |
1492 @end group | |
1493 @group | |
1494 (default-value 'buffer-local) | |
1495 @result{} new-default | |
1496 @end group | |
1497 @group | |
1498 (setq buffer-local 'another-default) | |
1499 @result{} another-default | |
1500 @end group | |
1501 @group | |
1502 (default-value 'buffer-local) | |
1503 @result{} another-default | |
1504 @end group | |
1505 | |
1506 @group | |
1507 ;; @r{Back in buffer @samp{foo}:} | |
1508 buffer-local | |
1509 @result{} value-in-foo | |
1510 (default-value 'buffer-local) | |
1511 @result{} another-default | |
1512 @end group | |
1513 @end example | |
1514 @end defspec | |
1515 | |
1516 @defun set-default symbol value | |
1517 This function is like @code{setq-default}, except that @var{symbol} is | |
1518 an ordinary evaluated argument. | |
1519 | |
1520 @example | |
1521 @group | |
1522 (set-default (car '(a b c)) 23) | |
1523 @result{} 23 | |
1524 @end group | |
1525 @group | |
1526 (default-value 'a) | |
1527 @result{} 23 | |
1528 @end group | |
1529 @end example | |
1530 @end defun | |
1531 | |
1532 @node File Local Variables | |
1533 @section File Local Variables | |
1534 @cindex file local variables | |
1535 | |
1536 A file can specify local variable values; Emacs uses these to create | |
1537 buffer-local bindings for those variables in the buffer visiting that | |
1538 file. @xref{File variables, , Local Variables in Files, emacs, The | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1539 GNU Emacs Manual}, for basic information about file-local variables. |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1540 This section describes the functions and variables that affect how |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1541 file-local variables are processed. |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1542 |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1543 If a file-local variable could specify an arbitrary function or Lisp |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1544 expression that would be called later, visiting a file could take over |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1545 your Emacs. Emacs protects against this by automatically setting only |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1546 those file-local variables whose specified values are known to be |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1547 safe. Other file-local variables are set only if the user agrees. |
84109 | 1548 |
103102
789636652cc9
* variables.texi (File Local Variables): Note that read-circle is
Chong Yidong <cyd@stupidchicken.com>
parents:
102846
diff
changeset
|
1549 For additional safety, @code{read-circle} is temporarily bound to |
789636652cc9
* variables.texi (File Local Variables): Note that read-circle is
Chong Yidong <cyd@stupidchicken.com>
parents:
102846
diff
changeset
|
1550 @code{nil} when Emacs reads file-local variables (@pxref{Input |
789636652cc9
* variables.texi (File Local Variables): Note that read-circle is
Chong Yidong <cyd@stupidchicken.com>
parents:
102846
diff
changeset
|
1551 Functions}). This prevents the Lisp reader from recognizing circular |
789636652cc9
* variables.texi (File Local Variables): Note that read-circle is
Chong Yidong <cyd@stupidchicken.com>
parents:
102846
diff
changeset
|
1552 and shared Lisp structures (@pxref{Circular Objects}). |
789636652cc9
* variables.texi (File Local Variables): Note that read-circle is
Chong Yidong <cyd@stupidchicken.com>
parents:
102846
diff
changeset
|
1553 |
84109 | 1554 @defopt enable-local-variables |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1555 This variable controls whether to process file-local variables. |
84109 | 1556 The possible values are: |
1557 | |
1558 @table @asis | |
1559 @item @code{t} (the default) | |
1560 Set the safe variables, and query (once) about any unsafe variables. | |
1561 @item @code{:safe} | |
1562 Set only the safe variables and do not query. | |
1563 @item @code{:all} | |
1564 Set all the variables and do not query. | |
1565 @item @code{nil} | |
1566 Don't set any variables. | |
1567 @item anything else | |
1568 Query (once) about all the variables. | |
1569 @end table | |
1570 @end defopt | |
1571 | |
1572 @defun hack-local-variables &optional mode-only | |
1573 This function parses, and binds or evaluates as appropriate, any local | |
1574 variables specified by the contents of the current buffer. The variable | |
1575 @code{enable-local-variables} has its effect here. However, this | |
1576 function does not look for the @samp{mode:} local variable in the | |
1577 @w{@samp{-*-}} line. @code{set-auto-mode} does that, also taking | |
1578 @code{enable-local-variables} into account (@pxref{Auto Major Mode}). | |
1579 | |
98881
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1580 This function works by walking the alist stored in |
98896
b04b1b0d5866
(File Local Variables): Fix last change.
Eli Zaretskii <eliz@gnu.org>
parents:
98881
diff
changeset
|
1581 @code{file-local-variables-alist} and applying each local variable in |
98881
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1582 turn. It calls @code{before-hack-local-variables-hook} and |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1583 @code{hack-local-variables-hook} before and after applying the |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1584 variables, respectively. |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1585 |
84109 | 1586 If the optional argument @var{mode-only} is non-@code{nil}, then all |
1587 this function does is return @code{t} if the @w{@samp{-*-}} line or | |
1588 the local variables list specifies a mode and @code{nil} otherwise. | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1589 It does not set the mode nor any other file-local variable. |
84109 | 1590 @end defun |
1591 | |
98881
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1592 @defvar file-local-variables-alist |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1593 This buffer-local variable holds the alist of file-local variable |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1594 settings. Each element of the alist is of the form |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1595 @w{@code{(@var{var} . @var{value})}}, where @var{var} is a symbol of |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1596 the local variable and @var{value} is its value. When Emacs visits a |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1597 file, it first collects all the file-local variables into this alist, |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1598 and then the @code{hack-local-variables} function applies them one by |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1599 one. |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1600 @end defvar |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1601 |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1602 @defvar before-hack-local-variables-hook |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1603 Emacs calls this hook immediately before applying file-local variables |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1604 stored in @code{file-local-variables-alist}. |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1605 @end defvar |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1606 |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1607 @defvar hack-local-variables-hook |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1608 Emacs calls this hook immediately after it finishes applying |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1609 file-local variables stored in @code{file-local-variables-alist}. |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1610 @end defvar |
a6d974af2bf4
(File Local Variables): Document `file-local-variables-alist',
Eli Zaretskii <eliz@gnu.org>
parents:
98734
diff
changeset
|
1611 |
84109 | 1612 @cindex safe local variable |
1613 You can specify safe values for a variable with a | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1614 @code{safe-local-variable} property. The property has to be a |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1615 function of one argument; any value is safe if the function returns |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1616 non-@code{nil} given that value. Many commonly-encountered file |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1617 variables have @code{safe-local-variable} properties; these include |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1618 @code{fill-column}, @code{fill-prefix}, and @code{indent-tabs-mode}. |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1619 For boolean-valued variables that are safe, use @code{booleanp} as the |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1620 property value. Lambda expressions should be quoted so that |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1621 @code{describe-variable} can display the predicate. |
84109 | 1622 |
1623 @defopt safe-local-variable-values | |
1624 This variable provides another way to mark some variable values as | |
1625 safe. It is a list of cons cells @code{(@var{var} . @var{val})}, | |
1626 where @var{var} is a variable name and @var{val} is a value which is | |
1627 safe for that variable. | |
1628 | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1629 When Emacs asks the user whether or not to obey a set of file-local |
84109 | 1630 variable specifications, the user can choose to mark them as safe. |
1631 Doing so adds those variable/value pairs to | |
1632 @code{safe-local-variable-values}, and saves it to the user's custom | |
1633 file. | |
1634 @end defopt | |
1635 | |
1636 @defun safe-local-variable-p sym val | |
1637 This function returns non-@code{nil} if it is safe to give @var{sym} | |
1638 the value @var{val}, based on the above criteria. | |
1639 @end defun | |
1640 | |
1641 @c @cindex risky local variable Duplicates risky-local-variable | |
1642 Some variables are considered @dfn{risky}. A variable whose name | |
1643 ends in any of @samp{-command}, @samp{-frame-alist}, @samp{-function}, | |
1644 @samp{-functions}, @samp{-hook}, @samp{-hooks}, @samp{-form}, | |
1645 @samp{-forms}, @samp{-map}, @samp{-map-alist}, @samp{-mode-alist}, | |
1646 @samp{-program}, or @samp{-predicate} is considered risky. The | |
1647 variables @samp{font-lock-keywords}, @samp{font-lock-keywords} | |
1648 followed by a digit, and @samp{font-lock-syntactic-keywords} are also | |
1649 considered risky. Finally, any variable whose name has a | |
1650 non-@code{nil} @code{risky-local-variable} property is considered | |
1651 risky. | |
1652 | |
1653 @defun risky-local-variable-p sym | |
1654 This function returns non-@code{nil} if @var{sym} is a risky variable, | |
1655 based on the above criteria. | |
1656 @end defun | |
1657 | |
1658 If a variable is risky, it will not be entered automatically into | |
1659 @code{safe-local-variable-values} as described above. Therefore, | |
1660 Emacs will always query before setting a risky variable, unless the | |
1661 user explicitly allows the setting by customizing | |
1662 @code{safe-local-variable-values} directly. | |
1663 | |
1664 @defvar ignored-local-variables | |
1665 This variable holds a list of variables that should not be given local | |
1666 values by files. Any value specified for one of these variables is | |
1667 completely ignored. | |
1668 @end defvar | |
1669 | |
1670 The @samp{Eval:} ``variable'' is also a potential loophole, so Emacs | |
1671 normally asks for confirmation before handling it. | |
1672 | |
1673 @defopt enable-local-eval | |
1674 This variable controls processing of @samp{Eval:} in @samp{-*-} lines | |
1675 or local variables | |
1676 lists in files being visited. A value of @code{t} means process them | |
1677 unconditionally; @code{nil} means ignore them; anything else means ask | |
1678 the user what to do for each file. The default value is @code{maybe}. | |
1679 @end defopt | |
1680 | |
1681 @defopt safe-local-eval-forms | |
1682 This variable holds a list of expressions that are safe to | |
1683 evaluate when found in the @samp{Eval:} ``variable'' in a file | |
1684 local variables list. | |
1685 @end defopt | |
1686 | |
1687 If the expression is a function call and the function has a | |
1688 @code{safe-local-eval-function} property, the property value | |
1689 determines whether the expression is safe to evaluate. The property | |
1690 value can be a predicate to call to test the expression, a list of | |
1691 such predicates (it's safe if any predicate succeeds), or @code{t} | |
1692 (always safe provided the arguments are constant). | |
1693 | |
1694 Text properties are also potential loopholes, since their values | |
1695 could include functions to call. So Emacs discards all text | |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1696 properties from string values specified for file-local variables. |
84109 | 1697 |
100710
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1698 @node Directory Local Variables |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1699 @section Directory Local Variables |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1700 @cindex directory local variables |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1701 |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1702 A directory can specify local variable values common to all files in |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1703 that directory; Emacs uses these to create buffer-local bindings for |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1704 those variables in buffers visiting any file in that directory. This |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1705 is useful when the files in the directory belong to some @dfn{project} |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1706 and therefore share the same local variables. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1707 |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1708 There are two different methods for specifying directory local |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1709 variables: by putting them in a special file, or by defining a |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1710 @dfn{project class} for that directory. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1711 |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1712 @defvr Constant dir-locals-file |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1713 This constant is the name of the file where Emacs expects to find the |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1714 directory-local variables. The name of the file is |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1715 @file{.dir-locals.el}@footnote{ |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1716 The MS-DOS version of Emacs uses @file{_dir-locals.el} instead, due to |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1717 limitations of the DOS filesystems. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1718 }. A file by that name in a directory causes Emacs to apply its |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1719 settings to any file in that directory or any of its subdirectories. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1720 If some of the subdirectories have their own @file{.dir-locals.el} |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1721 files, Emacs uses the settings from the deepest file it finds starting |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1722 from the file's directory and moving up the directory tree. The file |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1723 specifies local variables as a specially formatted list; see |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1724 @ref{Directory Variables, , Per-directory Local Variables, emacs, The |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1725 GNU Emacs Manual}, for more details. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1726 @end defvr |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1727 |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1728 @defun hack-dir-local-variables |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1729 This function reads the @code{.dir-locals.el} file and stores the |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1730 directory-local variables in @code{file-local-variables-alist} that is |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1731 local to the buffer visiting any file in the directory, without |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1732 applying them. It also stores the directory-local settings in |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1733 @code{dir-locals-class-alist}, where it defines a special class for |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1734 the directory in which @file{.dir-locals.el} file was found. This |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1735 function works by calling @code{dir-locals-set-class-variables} and |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1736 @code{dir-locals-set-directory-class}, described below. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1737 @end defun |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1738 |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1739 @defun dir-locals-set-class-variables class variables |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1740 This function defines a set of variable settings for the named |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1741 @var{class}, which is a symbol. You can later assign the class to one |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1742 or more directories, and Emacs will apply those variable settings to |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1743 all files in those directories. The list in @var{variables} can be of |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1744 one of the two forms: @code{(@var{major-mode} . @var{alist})} or |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1745 @code{(@var{directory} . @var{list})}. With the first form, if the |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1746 file's buffer turns on a mode that is derived from @var{major-mode}, |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1747 then the all the variables in the associated @var{alist} are applied; |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1748 @var{alist} should be of the form @code{(@var{name} . @var{value})}. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1749 A special value @code{nil} for @var{major-mode} means the settings are |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1750 applicable to any mode. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1751 |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1752 With the second form of @var{variables}, if @var{directory} is the |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1753 initial substring of the file's directory, then @var{list} is applied |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1754 recursively by following the above rules; @var{list} should be of one |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1755 of the two forms accepted by this function in @var{variables}. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1756 @end defun |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1757 |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1758 @defun dir-locals-set-directory-class directory class |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1759 This function assigns @var{class} to all the files in @code{directory} |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1760 and its subdirectories. Thereafter, all the variable settings |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1761 specified for @var{class} will be applied to any visited file in |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1762 @var{directory} and its children. @var{class} must have been already |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1763 defined by @code{dir-locals-set-class-variables} |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1764 @end defun |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1765 |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1766 @defvar dir-locals-class-alist |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1767 This alist holds the class symbols and the associated variable |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1768 settings. It is updated by @code{dir-locals-set-class-variables}. |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1769 @end defvar |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1770 |
103456
22a2d318807d
(Directory Local Variables): Update for 2009-04-11 name-change of
Glenn Morris <rgm@gnu.org>
parents:
103273
diff
changeset
|
1771 @defvar dir-locals-directory-cache |
22a2d318807d
(Directory Local Variables): Update for 2009-04-11 name-change of
Glenn Morris <rgm@gnu.org>
parents:
103273
diff
changeset
|
1772 This alist holds directory names, their assigned class names, and |
22a2d318807d
(Directory Local Variables): Update for 2009-04-11 name-change of
Glenn Morris <rgm@gnu.org>
parents:
103273
diff
changeset
|
1773 modification times of the associated directory local variables file. |
22a2d318807d
(Directory Local Variables): Update for 2009-04-11 name-change of
Glenn Morris <rgm@gnu.org>
parents:
103273
diff
changeset
|
1774 It is updated by @code{dir-locals-set-directory-class}. |
100710
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1775 @end defvar |
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1776 |
98680
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1777 @node Frame-Local Variables |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1778 @section Frame-Local Values for Variables |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1779 @cindex frame-local variables |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1780 |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1781 In addition to buffer-local variable bindings (@pxref{Buffer-Local |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1782 Variables}), Emacs supports @dfn{frame-local} bindings. A frame-local |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1783 binding for a variable is in effect in a frame for which it was |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1784 defined. |
98680
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1785 |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1786 In practice, frame-local variables have not proven very useful. |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1787 Ordinary frame parameters are generally used instead (@pxref{Frame |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1788 Parameters}). The function @code{make-variable-frame-local}, which |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1789 was used to define frame-local variables, has been deprecated since |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1790 Emacs 22.2. However, you can still define a frame-specific binding |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1791 for a variable @var{var} in frame @var{frame}, by setting the |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1792 @var{var} frame parameter for that frame: |
98680
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1793 |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1794 @lisp |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1795 (modify-frame-parameters @var{frame} '((@var{var} . @var{value}))) |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1796 @end lisp |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1797 |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1798 @noindent |
0cc86df465ef
(Frame-Local Variables): New section.
Eli Zaretskii <eliz@gnu.org>
parents:
87649
diff
changeset
|
1799 This causes the variable @var{var} to be bound to the specified |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1800 @var{value} in the named @var{frame}. To check the frame-specific |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1801 values of such variables, use @code{frame-parameter}. @xref{Parameter |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1802 Access}. |
100710
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1803 |
102306
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1804 Note that you cannot have a frame-local binding for a variable that |
00d32e2488cf
(Variables): Clarify introduction.
Chong Yidong <cyd@stupidchicken.com>
parents:
101144
diff
changeset
|
1805 has a buffer-local binding. |
100710
ac3db465bf7b
(Directory Local Variables): New node.
Eli Zaretskii <eliz@gnu.org>
parents:
99898
diff
changeset
|
1806 |
84109 | 1807 @node Variable Aliases |
1808 @section Variable Aliases | |
1809 @cindex variable aliases | |
1810 | |
1811 It is sometimes useful to make two variables synonyms, so that both | |
1812 variables always have the same value, and changing either one also | |
1813 changes the other. Whenever you change the name of a | |
1814 variable---either because you realize its old name was not well | |
1815 chosen, or because its meaning has partly changed---it can be useful | |
1816 to keep the old name as an @emph{alias} of the new one for | |
1817 compatibility. You can do this with @code{defvaralias}. | |
1818 | |
1819 @defun defvaralias new-alias base-variable &optional docstring | |
1820 This function defines the symbol @var{new-alias} as a variable alias | |
1821 for symbol @var{base-variable}. This means that retrieving the value | |
1822 of @var{new-alias} returns the value of @var{base-variable}, and | |
1823 changing the value of @var{new-alias} changes the value of | |
1824 @var{base-variable}. The two aliased variable names always share the | |
1825 same value and the same bindings. | |
1826 | |
1827 If the @var{docstring} argument is non-@code{nil}, it specifies the | |
1828 documentation for @var{new-alias}; otherwise, the alias gets the same | |
1829 documentation as @var{base-variable} has, if any, unless | |
1830 @var{base-variable} is itself an alias, in which case @var{new-alias} gets | |
1831 the documentation of the variable at the end of the chain of aliases. | |
1832 | |
1833 This function returns @var{base-variable}. | |
1834 @end defun | |
1835 | |
1836 Variable aliases are convenient for replacing an old name for a | |
1837 variable with a new name. @code{make-obsolete-variable} declares that | |
1838 the old name is obsolete and therefore that it may be removed at some | |
1839 stage in the future. | |
1840 | |
1841 @defun make-obsolete-variable obsolete-name current-name &optional when | |
86434
1aadc9bdea81
(Variable Aliases): Minor cleanup.
Richard M. Stallman <rms@gnu.org>
parents:
85688
diff
changeset
|
1842 This function makes the byte compiler warn that the variable |
84109 | 1843 @var{obsolete-name} is obsolete. If @var{current-name} is a symbol, it is |
1844 the variable's new name; then the warning message says to use | |
1845 @var{current-name} instead of @var{obsolete-name}. If @var{current-name} | |
1846 is a string, this is the message and there is no replacement variable. | |
1847 | |
1848 If provided, @var{when} should be a string indicating when the | |
1849 variable was first made obsolete---for example, a date or a release | |
1850 number. | |
1851 @end defun | |
1852 | |
1853 You can make two variables synonyms and declare one obsolete at the | |
1854 same time using the macro @code{define-obsolete-variable-alias}. | |
1855 | |
1856 @defmac define-obsolete-variable-alias obsolete-name current-name &optional when docstring | |
1857 This macro marks the variable @var{obsolete-name} as obsolete and also | |
1858 makes it an alias for the variable @var{current-name}. It is | |
1859 equivalent to the following: | |
1860 | |
1861 @example | |
1862 (defvaralias @var{obsolete-name} @var{current-name} @var{docstring}) | |
1863 (make-obsolete-variable @var{obsolete-name} @var{current-name} @var{when}) | |
1864 @end example | |
1865 @end defmac | |
1866 | |
1867 @defun indirect-variable variable | |
1868 This function returns the variable at the end of the chain of aliases | |
1869 of @var{variable}. If @var{variable} is not a symbol, or if @var{variable} is | |
1870 not defined as an alias, the function returns @var{variable}. | |
1871 | |
1872 This function signals a @code{cyclic-variable-indirection} error if | |
1873 there is a loop in the chain of symbols. | |
1874 @end defun | |
1875 | |
1876 @example | |
1877 (defvaralias 'foo 'bar) | |
1878 (indirect-variable 'foo) | |
1879 @result{} bar | |
1880 (indirect-variable 'bar) | |
1881 @result{} bar | |
1882 (setq bar 2) | |
1883 bar | |
1884 @result{} 2 | |
1885 @group | |
1886 foo | |
1887 @result{} 2 | |
1888 @end group | |
1889 (setq foo 0) | |
1890 bar | |
1891 @result{} 0 | |
1892 foo | |
1893 @result{} 0 | |
1894 @end example | |
1895 | |
1896 @node Variables with Restricted Values | |
1897 @section Variables with Restricted Values | |
1898 | |
1899 Ordinary Lisp variables can be assigned any value that is a valid | |
1900 Lisp object. However, certain Lisp variables are not defined in Lisp, | |
1901 but in C. Most of these variables are defined in the C code using | |
1902 @code{DEFVAR_LISP}. Like variables defined in Lisp, these can take on | |
1903 any value. However, some variables are defined using | |
1904 @code{DEFVAR_INT} or @code{DEFVAR_BOOL}. @xref{Defining Lisp | |
1905 variables in C,, Writing Emacs Primitives}, in particular the | |
1906 description of functions of the type @code{syms_of_@var{filename}}, | |
1907 for a brief discussion of the C implementation. | |
1908 | |
1909 Variables of type @code{DEFVAR_BOOL} can only take on the values | |
1910 @code{nil} or @code{t}. Attempting to assign them any other value | |
1911 will set them to @code{t}: | |
1912 | |
1913 @example | |
1914 (let ((display-hourglass 5)) | |
1915 display-hourglass) | |
1916 @result{} t | |
1917 @end example | |
1918 | |
1919 @defvar byte-boolean-vars | |
1920 This variable holds a list of all variables of type @code{DEFVAR_BOOL}. | |
1921 @end defvar | |
1922 | |
1923 Variables of type @code{DEFVAR_INT} can only take on integer values. | |
1924 Attempting to assign them any other value will result in an error: | |
1925 | |
1926 @example | |
1927 (setq window-min-height 5.0) | |
1928 @error{} Wrong type argument: integerp, 5.0 | |
1929 @end example | |
1930 | |
1931 @ignore | |
1932 arch-tag: 5ff62c44-2b51-47bb-99d4-fea5aeec5d3e | |
1933 @end ignore |