annotate nt/ChangeLog @ 35469:c3bea8f6c4e3

typo

2001-01-19  Andrew Innes  <[e-mail]>

	* addpm.c (env_vars): Add a version-independent site-lisp
	directory to EMACSLOADPATH, after the version dependent one.

2001-01-06  Andrew Innes  <[e-mail]>

	* README: Update info about compilers.

	* makefile.w32-in: Use $(MAKETYPE) instead of $(SHELLTYPE) to
	select correct rule for invoking make in another directory.  Amend
	rules accordingly.
	(clean): Delete $(COMPILER_TEMP_FILES) instead of *.pdb.

	* nmake.defs (EMACS_ICON_PATH): Delete definition.
	(COMPILER_TEMP_FILES): New definition.
	(MAKETYPE): New definition.

	* gmake.defs (EMACS_ICON_PATH): Delete definition.
	(COMPILER_TEMP_FILES): New definition.
	(MAKETYPE): New definition.

	* makefile.def (EMACS_ICON_PATH): Delete definition.

	* configure.bat: Be careful not to add trailing spaces when
	outputting to config.settings.

2001-01-02  Andrew Innes  <[e-mail]>

	* config.nt (RE_TRANSLATE): Use CHAR_TABLE_TRANSLATE macro rather
	than the function.

2000-12-17  Andrew Innes  <[e-mail]>

	* makefile.w32-in (install): Copy directories to the correct
	places.
	(real_install): Remove obsolete target.

2000-12-06  Andrew Innes  <[e-mail]>

	* nmake.defs (CURDIR): New define.
	(INSTALL_DIR): Use it.

	* gmake.defs (NEW_CYGWIN): New define.
	(DQUOTE) [NEW_CYGWIN]: Cygnus changed the quoting rules since b20,
	so we need to adjust how we escape embedded quotes.
	(SETLOADPATH): Set EMACSLOADPATH to an absolute directory,
	relative to $(CURDIR).

2000-11-25  Jason Rumney  <[e-mail]>

	* config.nt (GC_MARK_STACK, GC_SETJMP_WORKS): Define.

2000-10-17  Andrew Innes  <[e-mail]>

	* makefile.w32-in (recompile): New target to recompile lisp
	directory.
	(recompile-CMD, recompile-SH): New support targets.

2000-09-24  Jason Rumney  <[e-mail]>

	* config.nt (NO_RETURN): Define it.

2000-09-17  Andrew Innes  <[e-mail]>

	* gmake.defs: Revert to Unix line endings.

	* nmake.defs: Revert to Unix line endings.

2000-09-16  Andrew Innes  <[e-mail]>

	* gmake.defs (SETLOADPATH): Change definition to work from any
	subdirectory.

2000-09-14  Andrew Innes  <[e-mail]>

	* makefile.w32-in: Revert to Unix line endings.

2000-09-14  Andrew Innes  <[e-mail]>

	* INSTALL: Add note about expected error messages when configure
	is run.

	* configure.bat: Simplify the generation of makefiles (don't need
	to generate various top-level targets that invoke make in other
	directories).

	* gmake.defs (SHELLTYPE): New define.
	(SETLOADPATH): New define.

	* nmake.defs (SHELLTYPE): New define.

	* makefile.w32-in: Standardize indentation somewhat.
	Add bootstrap support.
	Pass $(MFLAGS) when invoking make recursively.
	Add shell-specific variants of top-level targets that invoke make
	recursively in other directories, and add necessary computed
	dependencies.

2000-09-03  Andrew Innes  <[e-mail]>

	* makefile.w32-in: Change to DOS line endings.

	* configure.bat: Change to DOS line endings.

	* addsection.c (_ANONYMOUS_UNION) [__GNUC__]: New define.
	(_ANONYMOUS_STRUCT) [__GNUC__]: New define.

	* preprep.c (_ANONYMOUS_UNION) [__GNUC__]: New define.
	(_ANONYMOUS_STRUCT) [__GNUC__]: New define.

	* gmake.defs (CFLAGS): No need for -D_ANONYMOUS_UNION
	-D_ANONYMOUS_STRUCT on compile line.
	(EMACS_EXTRA_C_FLAGS): No need for -DORDINARY_LINK.
	(ARCH_CFLAGS): Change optimization flags to -O2.
	(FOREACH, FORVAR, FORDO, ENDFOR): New definitions.
	(ARGQUOTE, DQUOTE): New defines.

	* nmake.defs (CFLAGS): No need for -D_ANONYMOUS_UNION
	-D_ANONYMOUS_STRUCT on compile line.
	(FOREACH, FORVAR, FORDO, ENDFOR): New definitions.
	(ARGQUOTE, DQUOTE): New defines.

2000-08-22  Andrew Innes  <[e-mail]>

	* configure.bat: New file.

	* gmake.defs: New file.

	* nmake.defs: New file.

	* makefile.w32-in: New file.

	* INSTALL: Rewrite to match new configure process.

	* config.nt [WINDOWSNT]: Don't declare getenv.
	(EMACS_CONFIG_OPTIONS): Define according to compiler being used.

	* addpm.c (main): Accept /q to mean install based on addpm's
	location without asking.  Remove reference to emacs.bat which is
	now obsolete.

	* addsection.c (PTR_TO_OFFSET): Cast ptr to unsigned char*.

	* paths.h: Use forward slash as directory separator in all path
	definitions.
	(PATH_DUMPLOADSEARCH): Revert to definition used on Unix.

	* preprep.c (PTR_TO_OFFSET): Cast ptr to unsigned char *.

	* runemacs.c: Remove WIN32 define.

	* inc/sys/file.h (F_OK, X_OK, W_OK, R_OK, D_OK): Define if D_OK is
	not defined.

	* inc/sys/socket.h (_WINSOCK_H): Undefine if defined.
	(fd_set): Define to new name, after including winsock.h, so we can
	provide our own implementation.

2000-07-05  Andrew Innes  <[e-mail]>

	* ebuild.bat: Add support for specifying make arguments.

	* makefile.nt: Add support for `bootstrap' and related targets.

2000-06-11  Jason Rumney  <[e-mail]>

	* config.nt: Define POINTER_TYPE, PTR, PROTOTYPES and __P.

2000-02-06  Andrew Innes  <[e-mail]>

	* inc/sys/time.h: Add inclusion protection.

	* makefile.def (SYS_LDFLAGS): Add -nologo.

1999-11-22  Andrew Innes  <[e-mail]>

	* install.bat: Pass on command line arguments to make.

	* makefile.nt (fast_install): Bring commands up-to-date, and fix
	typo.

1999-11-21  Andrew Innes  <[e-mail]>

	* makefile.nt (all): Build leim if present.
	(install): Install leim if present.
	(clean): Clean leim if present.

	* addpm.c (env_vars): Include leim in default EMACSLOADPATH
	definition.

	* emacs.bat.in (EMACSLOADPATH): Include leim.

After the release of 20.4, development was split into two separate
code lines.  One line contained the code for Emacs 21, and the other
one the code for the 20.x releases after 20.4.  The following change
log entries up to the entry ``20.4 released'' are for the 20.x code
line.  Change logs above this notice are those for the 21.x code line.

2000-06-13  Gerd Moellmann  <[e-mail]>

	* Version 20.7 released.
	
2000-05-12  Jason Rumney  <[e-mail]>
	
	* INSTALL: Remove point 5 and other references to emacs.bat.
	Renumber following points. Add note in point 1 about emacs.bat
	and debug.bat being removed.

2000-02-20  Andrew Innes  <[e-mail]>

	* makefile.nt: Remove all references to emacs.bat and debug.bat.

	* emacs.bat.in: Remove obsolete file.

	* debug.bat.in: Remove obsolete file.

1999-11-22  Andrew Innes  <[e-mail]>

	* install.bat: Pass on command line arguments to make.
	
	* makefile.nt (fast_install): Bring commands up-to-date, and fix
	typo.

1999-11-21  Andrew Innes  <[e-mail]>

	* makefile.nt (all): Build leim if present.
	(install): Install leim if present.
	(clean): Clean leim if present.

	* addpm.c (env_vars): Include leim in default EMACSLOADPATH
	definition.

	* emacs.bat.in (EMACSLOADPATH): Include leim.

1999-11-04  Andrew Innes  <[e-mail]>

	* makefile.def (ARCH_CFLAGS): Disable the frame pointer omission
	optimization, to ensure accurate stack traces.  The performance
	loss is negligible.

1999-07-12  Richard Stallman  <[e-mail]>

	* Version 20.4 released.

1999-06-16  Andrew Innes  <[e-mail]>

	* emacs.rc: Use an icon with a transparent background, to be in
	keeping with other applications.

1999-06-03  Andrew Innes  <[e-mail]>

	* preprep.c: Fix typo.

1999-05-02  Andrew Innes  <[e-mail]>

	* config.h: Remove obsolete file.

	* preprep.c (copy_executable_and_move_sections): Ifdef out a
	couple of unused switch cases that aren't defined on all
	platforms.

	* ftime.bat: Add another variation of the profile command, which
	only profiles extended commands.

1999-03-31  Geoff Voelker  <[e-mail]>

	* cmdproxy.c (main): Fix parens.

1999-03-25  Andrew Innes  <[e-mail]>

	* cmdproxy.c (main): Call GetShortPathName to normalize program
	names for comparison.

1999-03-05  Geoff Voelker  <[e-mail]>

	* makefile.def: Compile multiple .c files when possible.
	Use BLD instead of assuming i386.
	* makefile.nt: Remove common multiple file compilation commands.

1999-03-04  Geoff Voelker  <[e-mail]>

	* cmdproxy.c (main): Add missing parens.

1999-02-20  Andrew Innes  <[e-mail]>

	* preprep.c: New program to allow dumped image to be profiled.

	* makefile.nt (preprep): New target.
	(ALL): Build it.

	* makefile.def (ARCH_CFLAGS): Set struct packing to 8.

	* ftime.bat: Invoke preprep to prepare dumped image for profiling.
	Change prep options to profile libc functions and skip the startup
	code.

1999-02-15  Geoff Voelker  <[e-mail]>

	* makefile.nt: Create installation directory as first step.

1999-01-31  Andrew Innes  <[e-mail]>

	* addsection.c: (ROUND_UP_DST_AND_ZERO): Renamed from
	ROUND_UP_DST.  Zeroes the alignment slop.
	(copy_executable_and_add_section): Update the
	SizeOfHeaders field properly.

1999-01-27  Andrew Innes  <[e-mail]>

	* makefile.nt: Do make version comparison as strings.

1999-01-26  Andrew Innes  <[e-mail]>

	* runemacs.c (WinMain): Pass explicit environment block to
	CreateProcess, to work around a bug in Windows 95/98.

1999-01-22  Geoff Voelker  <[e-mail]>

	* icons: New directory with Davenport's icons.
	icons/sink.ico: Renamed from emacs.ico.

	* makefile.nt (install, fast_install): Install Windows icons
	into etc/icons.

	* emacs.rc (ICON): Use icons/gnu2a32.ico as the default icon.

1999-01-17  Andrew Innes  <[e-mail]>

	* makefile.nt: (ALL): List top-level targets.
	(addsection): New top-level target.
	(install): Copy fns-*.el to bin directory.

	* addsection.c: New program to add static heap section to
	temacs.exe after linking, in support of new unexec method.

1998-12-28  Andrew Innes  <[e-mail]>

	* cmdproxy.c (spawn): Pass directory for child as parameter.
	(main): Save startup directory to give to spawn, then change
	directory to location of .exe in order not to prevent startup
	directory from being deleted.

1998-12-08  Geoff Voelker  <[e-mail]>

	* makefile.nt: Do string comparision of _NMAKE_VER.

1998-12-02  Geoff Voelker  <[e-mail]>

	* config.nt (LOCALTIME_CACHE): Define.

1998-11-13  Andrew Innes  <[e-mail]>

	* install.bat: Convert to DOS format.

1998-11-10  Andrew Innes  <[e-mail]>

	* cmdproxy.c (main): Set environment size only when running
	command.com.

1998-11-03  Theodore Jump <[e-mail]>

	* makefile.def (SYS_LDFLAGS): Use swapfile when running from cd or net.
	(DEL_TREE): Use rd instead of rmdir.
	(ARCH_CFLAGS): Optimize for P6.  Align structures on 8-byte boundaries.
	* makefile.nt: Compile multiple source files when possible.
	
1998-10-05  Geoff Voelker  <[e-mail]>

	* cmdproxy.c (main): Treat command line options as case-insensitive.

1998-08-19  Richard Stallman  <[e-mail]>

	* Version 20.3 released.

1998-07-20  Geoff Voelker  <[e-mail]>

	* addpm.c (main): Explicitly check result of message box for OK.

1998-06-05  Andrew Innes  <[e-mail]>

	* inc/sys/file.h (D_OK): Define new macro.

1998-06-01  Andrew Innes  <[e-mail]>

	* makefile.def (CFLAGS): Do not define HAVE_NTGUI.

1998-05-30  Geoff Voelker  <[e-mail]>

	* emacs.rc (VS_VERSION_INFO): Define.

1998-04-23  Geoff Voelker  <[e-mail]>

	* makefile.nt (emacs.bat, debug.bat): Create them in the
	installation directory.

1998-04-23  Andrew Innes  <[e-mail]>

	* ddeclient.c: New file.  (Support program for performing limited
 	interprocess communication on Windows.)

	* makefile.nt: Build ddeclient.

	* cmdproxy.c (main): Only set environment size for real shell, and
 	provide extra directory argument, when running on Windows 95.
	
1998-04-17  Geoff Voelker  <[e-mail]>

	* cmdproxy.c (fail): Exit with a negative return value.
	(spawn): Return subprocess return code as an argument.
	Explicitly copy environment block.
	(main): Update to use return value argument with spawn.
	Retry if spawn failed when a subshell was not tried.

	* config.nt: Include new macros from src/config.in.
	(GNU_MALLOC, REL_ALLOC): Define.
	(RE_TRANSLATE_TYPE): Use Lisp_Object as type.
	(RE_TRANSLATE): Use char_table_translate.

	* makefile.def (CP_DIR): Preserve attributes.

	* makefile.nt (clean): Delete patch generated files, optimized
	build directory.

1997-10-01  Geoff Voelker  <[e-mail]>

	* addpm.c (env_vars): Fix misplaced % in SHELL entry.

1997-09-19  Richard Stallman  <[e-mail]>

	* Version 20.2 released.

1997-09-15  Richard Stallman  <[e-mail]>

	* Version 20.1 released.

1997-09-11  Geoff Voelker  <[e-mail]>

	* debug.bat.in: New file.
	* makefile.nt (debug.bat): New target.

1997-09-02  Andrew Innes  <[e-mail]>

	* addpm.c (env_vars): Put site-lisp before lisp in EMACSLOADPATH.
	Quote group name.  Allow different icons to be specified.

	* cmdproxy.c (get_env_size): New function.
	(spawn): Explicitly pass in environment when creating subprocess.
	(main): Cleaup error messages.
	Specify dynamically sized environment block for real shell.
	Pass on unhandled switches to real shell.
	Quote program name.

	* makefile.def (CFLAGS_COMMON): Place pdb file in object build 
	directory.
	(CFLAGS) [!MSVCNT11]: Define _CRTAPI1.	

	* runemacs.c (WinMain): Allow Emacs process to be started with
 	high or low priority.

	* emacs.bat.in: Remove OS dependent operations.
	
1997-09-02  Geoff Voelker  <[e-mail]>

	* addpm.c (env_vars): No longer set INFOPATH.

	* cmdproxy.c (get_next_token): Null terminate token returned.

	* emacs.bat.in (INFOPATH): No longer set INFOPATH.

1997-08-10  Andrew Innes  <[e-mail]>

	* addpm.c (env_vars): Set SHELL to cmdproxy.
	(main): Initialize idDde to 0.
	Determine emacs_path from module file name.
	Prompt for install.

	* makefile.def (MSVCNT11): Conditionally define it.
	(BASE_LIBS): Do not use oldnames.lib.
	(SYS_LDFLAGS): Use pdb files.
	(CFLAGS_COMMON) [!spd]: Define EMACSDEBUG.
	(ARCH_CFLAGS) [i386 && spd]: Use space optimizations.
	(ARCH_CFLAGS) [alpha && spd]: Use optimizations.

	* makefile.nt (ALL): Build cmdproxy.
	(cmdproxy): New target.
	(install): Install cmdproxy.

	* ftime.bat, debug.bat, cmdproxy.c: New files.

1997-07-10  Geoff Voelker  <[e-mail]>

	* inc/sys/socket.h: (shutdown): Define.
	(sys_shutdown): Export.

1997-07-08  Richard Stallman  <[e-mail]>

	* config.nt (RE_TRANSLATE): Copy definition from config.in.

1997-07-01  Geoff Voelker  <[e-mail]>

	* config.nt: Update file comments.
	Update undefs added/removed in src/config.in.

1997-06-19  Geoff Voelker  <[e-mail]>

	* makefil.def, emacs.bat: Use windows95 and windowsnt instead
	of win95 and winnt, respectively.

1997-01-04  Geoff Voelker  <[e-mail]>

	* makefile.nt (real_install): Create site-lisp in installation dir.
	* addpm.c (env_vars): Add site-lisp to EMACSLOADPATH.
	* emacs.bat.in: Add site-lisp to EMACSLOADPATH.

1996-08-11  Richard Stallman  <[e-mail]>

	* Version 19.33 released.

1996-08-09  Geoff Voelker  <[e-mail]>

	* runemacs.c (WinMain): Put a space between the binary and its args.

1996-07-31  Richard Stallman  <[e-mail]>

	* Version 19.32 released.

1996-07-16  Andrew Innes  <[e-mail]>

	* makefile.nt (clean): Use OBJDIR macro.

1996-06-03  Kim F. Storm  <[e-mail]>

        * runemacs.c (CHOOSE_NEWEST_EXE): New parameter macro.
	Not defined by default.
	(WinMain): Add conditional testing CHOOSE_NEWEST_EXE.
	(WinMain): Convert backslashes to slashes in env var values.

        * addpm.c (env_vars): Use slashes, not backslashes.

1996-05-25  Karl Heuer  <[e-mail]>

	* Version 19.31 released.

1996-05-13  Andrew Innes  <[e-mail]>

	* install.bat: Set BUILD_TYPE and INSTALL_DIR before calling make;
	undo settings afterwards.

1996-05-08  Andrew Innes  <[e-mail]>

	* addpm.c (env_vars): Set SHELL registry entry to value of COMSPEC
 	environment variable.

1996-05-03  Andrew Innes <[e-mail]>

	* install.bat: Allow for optimized build.
	* makefile.def [BUILD_TYPE]: Build optimized version in its own dir.
	(ARCH_CFLAGS) [BUILD_TYPE == spd]: Build optimized version.

1996-05-03  Andrew Innes <[e-mail]>

	* addpm.c (REG_ROOT): Don't use a trailing backslash.
	(env_vars): Rename field emacs_path to emacs_dir.
	(main): Add link to runemacs instead of emacs.

	* install.bat: Check if INSTALL_DIR is passed as an argument.

	* makefile.def (CONFIG_H) [WIN95]: Use config.nt.

	* makefile.nt: Build and install runemacs.exe.

	* runemacs.c: New file.

	* config.w95: File removed.

	* inc/netdb.h, inc/unistd.h, inc/arpa/inet.h, inc/netinet/in.h,
	inc/sys/socket.h, inc/sys/time.h: New header files.

	* inc/sys/file.h (F_OK, X_OK, W_OK, R_OK): New macros.
	
1996-03-27  Geoff Voelker  <[e-mail]>

	* makefile.def (DEL): Defined.
	(DEL_TREE) [win95]: Defined.
	(SYS_LDFLAGS): Set executable versions to 3.10.
	
	* makefile.nt: Change uses of del to $(DEL).

1996-01-17  Erik Naggum  <[e-mail]>

	* All files: Update FSF's address in comment preamble.

1996-01-03  George V. Reilly  <[e-mail]>

	* emacs.ico: Now the proverbial kitchen sink icon.

1995-11-24  Richard Stallman  <[e-mail]>

	* Version 19.30 released.

1995-11-22  Geoff Voelker  <[e-mail]>

	* makefile.def (CP_DIR): Use platform independent switches for xcopy.

	* makefile.nt (install, fast_install, real_install, clean):
	Don't use switches to del not supported by Win95.

1995-11-07  Kevin Gallo  <[e-mail]>

	* makefile.nt (addpm.exe): Link with $(ADVAPI32).
	(install, fast_install): Change same-dir test to create test file in
	installation tree and thereby support read-only shares.
	(clean): Remove .pdb files.

	* makefile.def (NTGUI): New macro.
	[NTGUI] (CFLAGS): Define HAVE_NTGUI.

	* config.nt, config.w95: Update to latest src/config.in.

	* addpm.c (env_vars): New variable.
	(add_registry): New procedure.
	(main): Use values of configuration environment variables from
	the registry if defined, the process environment otherwise.

1995-06-19  Richard Stallman  <[e-mail]>

	* Version 19.29 released.

	* makefile.nt (addpm.exe): Change WinMainCRTStartup to mainCRTStartup.

1995-06-13  Geoff Voelker  <[e-mail]>

	* makefile.nt: Define .c to .obj suffix rule.
	(addpm.obj): Compile directly, use CFLAGS.
	(addpm.exe): Link from addpm.obj.
	
	* makefile.def (MSVCNT11): Defined.
	(BASE_LIBS) [MSVCNT11]: Use oldnames.lib.
	(CFLAGS_COMMON): Defined.
	(CFLAGS) [MSVCNT11]: Define _CRTAPI1 to _cdecl.
	
1995-06-09  Geoff Voelker  <[e-mail]>

	* emacs.bat.in: Renamed from emacs.bat
	(emacs_dir): Renamed from emacs_path
	Definition removed.

	* addpm.c: New file.
	* makefile.nt (ALL,addpm,addpm.exe,addpm.obj): Defined.
	(all): Depend upon $(BLD) and $(ALL).
	(install): Depend upon emacs.bat.
	Create program item for Emacs.
	(clean): Delete obj.
	(emacs.bat): Defined.
	* makefile.def (EMACS_ICON_PATH,ADDPM): Defined.

1995-05-27  Geoff Voelker  <[e-mail]>

	* ebuild.bat, emacs.bat, fast-install.bat, install.bat:
	Add carriage returns; necessary for batch files on Win95.

1995-05-25  Geoff Voelker  <[e-mail]>

	* config.w95: Created.
	* config.h: Changed to config.nt.
	
	* makefile.nt (SUBDIRS): Commented out.
	(all,install,clean): Expand for-loops.
	(BUILD_CMD,INSTALL_CMD,CLEAN_CMD): Defined.

	* makefile.def (SYS_LIB_DIR,SYS_INC_DIR): Undefined.
	(ARCH): New definition.
	(CPU,CONFIG_H,OS_TYPE): Defined.
	(INCLUDE,LIB): Checked if valid.
	(ntwin32.mak): Included.
	(AR,CC,LINK): New definition.
	(ADVAPI32,libc,BASE_LIBS): Defined.
	(SYS_LDFLAGS): New definition.
	Update comments and preprocessor conditionals.

	* emacs.bat (SHELL): Conditionally defined.
	(HOME): Conditionally defined.
	(emacs_path,HOME): Update comments.
	Turn off all echo.

1995-05-09  Geoff Voelker  <[e-mail]>

	* _emacs, config.h, ebuild.bat, emacs.bat, emacs.rc,
	fast-install.bat, install.bat, makefile.def, makefile.nt, paths.h,
	inc/pwd.h, inc/sys/dir.h, inc/sys/file.h, inc/sys/ioctl.h,
	inc/sys/param.h: Removed carriage-returns.

1995-05-06  Geoff Voelker  <[e-mail]>

	* makefile.def (CVTRES): Defined.

	* emacs.ico, emacs.rc: New files by Kevin Gallo.

1995-04-10  Geoff Voelker  <[e-mail]>

	* src: Removed.

	* src\config.h, src\paths.h: Moved to parent dir, src removed.

1995-04-09  Geoff Voelker  <[e-mail]>

	* makefile.def (INSTALL_DIR): Changed to generic directory.

	* emacs.bat: Added arguments when emacs.exe invoked.

	* ebuild.cmd, emacs.cmd, install.cmd: Changed extension to .bat.

1994-12-13  voelker  <[e-mail]>

	* makefile.def (CC): In configuration section.
	(COMPAT_LIB): Defined.

1994-11-01  voelker  <[e-mail]>

	* src/paths.h: New file.

	* src/config.h: New file.

	* inc/pwd.h: New file.

	* inc/sys/dir.h: New file.

	* inc/sys/file.h: New file.

	* inc/sys/ioctl.h: New file.

	* inc/sys/param.h: New file.

	* todo: New file.

	* readme: New file.

	* makefile.nt: New file.

        * makefile.def: New file.
 
        * install.cmd: New file.

        * install: New file.

        * fast-install.cmd: New file.

	* emacs.cmd: New file.

	* ebuild.cmd: New file.

	* _emacs: New file.

;; Local Variables:
;; coding: iso-2022-7bit
;; End: