annotate src/s/dgux.h @ 1320:c45c4e0cae7d

(Fprimitive_undo): When undoing an insert, move point and then delete.

/* Definitions file for GNU Emacs running on Data General's DG/UX
   version 4.32 and above.
   Copyright (C) 1985, 1986, 1991 Free Software Foundation, Inc.

This file is part of GNU Emacs.

GNU Emacs is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 1, or (at your option)
any later version.

GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU Emacs; see the file COPYING.  If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */


/*
 *	Define symbols to identify the version of Unix this is.
 *	Define all the symbols that apply correctly.
 */

/* #define UNIPLUS */
/* #define USG5 */
/* #define USG */
/* #define HPUX */
/* #define UMAX */
/* #define BSD4_1 */
#define BSD4_2
#define BSD4_3
#define BSD
/* #define VMS */

/* SYSTEM_TYPE should indicate the kind of system you are using.
 It sets the Lisp variable system-type.  */

#define SYSTEM_TYPE "dgux-unix"

/* NOMULTIPLEJOBS should be defined if your system's shell
 does not have "job control" (the ability to stop a program,
 run some other program, then continue the first one).  */

/* #define NOMULTIPLEJOBS */

/* Emacs can read input using SIGIO and buffering characters itself,
   or using CBREAK mode and making C-g cause SIGINT.
   The choice is controlled by the variable interrupt_input.
   Define INTERRUPT_INPUT to make interrupt_input = 1 the default (use SIGIO)

   SIGIO can be used only on systems that implement it (4.2 and 4.3).
   CBREAK mode has two disadvatages
     1) At least in 4.2, it is impossible to handle the Meta key properly.
        I hear that in system V this problem does not exist.
     2) Control-G causes output to be discarded.
        I do not know whether this can be fixed in system V.

   Another method of doing input is planned but not implemented.
   It would have Emacs fork off a separate process
   to read the input and send it to the true Emacs process
   through a pipe.
*/

#define INTERRUPT_INPUT

/* Letter to use in finding device name of first pty,
  if system supports pty's.  'a' means it is /dev/ptya0  */

#define FIRST_PTY_LETTER 'r'

/*
 *	Define HAVE_TIMEVAL if the system supports the BSD style clock values.
 *	Look in <sys/time.h> for a timeval structure.
 */

#define HAVE_TIMEVAL

/*
 *	Define HAVE_SELECT if the system supports the `select' system call.
 */

#define HAVE_SELECT

/*
 *	Define HAVE_SOCKETS if the system supports sockets.
 */

#define HAVE_SOCKETS

/*
 *	Define HAVE_PTYS if the system supports pty devices.
 */

#define HAVE_PTYS

/*
 *	Define NONSYSTEM_DIR_LIBRARY to make Emacs emulate
 *      The 4.2 opendir, etc., library functions.
 */

/* #define NONSYSTEM_DIR_LIBRARY */

/* Define this symbol if your system has the functions bcopy, etc. */

#define BSTRING

/* subprocesses should be defined if you want to
   have code for asynchronous subprocesses
   (as used in M-x compile and M-x shell).
   This is generally OS dependent, and not supported
   under most USG systems. */

#define subprocesses

/* If your system uses COFF (Common Object File Format) then define the
   preprocessor symbol "COFF". */

#define COFF

/* define MAIL_USE_FLOCK if the mailer uses flock
   to interlock access to /usr/spool/mail/$USER.
   The alternative is that a lock file named
   /usr/spool/mail/$USER.lock.  */

/* #define MAIL_USE_FLOCK */

/* Define CLASH_DETECTION if you want lock files to be written
   so that Emacs can tell instantly when you try to modify
   a file that someone else has modified in his Emacs.  */

/* #define CLASH_DETECTION */

/* Define a replacement for the baud rate switch, since DG/UX uses a different
   from BSD.  */

#define	BAUD_CONVERT    { 0, 110, 134, 150, 300, 600, 1200, 1800, 2400, \
			  4800, 9600, 19200, 38400 }

/*
 *	Define HAVE_GETTIMEOFDAY if gettimeofday() system call is available.
 */

#define HAVE_GETTIMEOFDAY

/*
 *	Define NLIST_STRUCT if the system has nlist.h
 */

#define	NLIST_STRUCT

/*
 *      Make WM Interface Compliant.
 */

#define XICCC

/* Here, on a separate page, add any special hacks needed
   to make Emacs work on this system.  For example,
   you might define certain system call names that don't
   exist on your system, or that do different things on
   your system and must be used only through an encapsulation
   (Which you should place, by convention, in sysdep.c).  */

/* Some compilers tend to put everything declared static
   into the initialized data area, which becomes pure after dumping Emacs.
   On these systems, you must #define static as nothing to foil this.
   Note that emacs carefully avoids static vars inside functions.  */

/* #define static */

/* DG/UX SPECIFIC ADDITIONS TO TEMPLATE FOLLOW: */

/* Use the Berkeley flavors of the library routines, instead of System V.  */

#define setpgrp(pid,pgrp) setpgrp2(pid,pgrp)
#define getpgrp(pid) getpgrp2(pid)

/* Act like Berkeley. */

#define _setjmp(env) sigsetjmp(env,0)
#define	_longjmp(env,val) longjmp(env,val)

/* Use TERMINFO instead of termcap */

#define	TERMINFO

/*
 *	Define HAVE_TERMIO if the system provides sysV-style ioctls
 *	for terminal control.
 *	DG/UX has both BSD and AT&T style ioctl's.  Bsd ioctl's don't
 *	seem to wait for the output to drain properly, so use System V.
 */

/* #define HAVE_TERMIO */

/*
 *	DG/UX 4.10 needs the following to turn on berkeley ioctl's.
 */

#ifndef HAVE_TERMIO
#define _BSD_TTY_FLAVOR
#endif

/*
 *	Use a Berkeley style sys/wait.h.
 *      This makes WIF* macros operate on structures instead of ints.
 */

#define _BSD_WAIT_FLAVOR

/* Enable the x-rebind keysym function.  Do not try to map function
   keys internally. */

#define XREBINDKEYSYM

/*
 *      Use BSD and POSIX-style signals.  This is crucial!
 */

/* MAKING_MAKEFILE must be defined in "ymakefile" before including config.h */
#ifndef MAKING_MAKEFILE

/* Make sure signal.h is included so macros below don't mess with it. */
/* DG/UX include files prevent multiple inclusion. */

#include <signal.h>

#define POSIX_SIGNALS

/* Not worth converting the old GNU malloc to work with POSIX_SIGNALS.  */
#define SYSTEM_MALLOC

/* Define this if you use System 5 Release 4 Streams */
#define SYSV4_PTYS
#define open  sys_open
#define close sys_close
#define read  sys_read
#define write sys_write

#define INTERRUPTABLE_OPEN
#define INTERRUPTABLE_CLOSE
/* can't hurt to define these, even though read/write should auto restart */
#define INTERRUPTABLE_IO

/* Can't use sys_signal because then etc/server.c would need sysdep.o.  */
#define signal(SIG,FUNC) berk_signal(SIG,FUNC)

#else /* MAKING_MAKEFILE */
/* force gcc to be used */
CC=gcc
#endif /* not MAKING_MAKEFILE */