Mercurial > emacs
annotate doc/misc/autotype.texi @ 111173:c7d5564f0621
Move ns-win.el's rather wacky menu adjustments to menu-bar.el.
* lisp/term/ns-win.el: Do not require easymenu.
(menu-bar-edit-menu) <copy, paste, paste-from-menu, separator-undo>:
<spell>: Move adjustments to menu-bar.el.
* lisp/menu-bar.el (menu-bar-edit-menu) <copy, paste, paste-from-menu>:
<separator-undo, spell>: Move ns-win's adjustments here.
* lisp/loadup.el [ns]: Do not load easymenu.
* src/Makefile.in (SOME_MACHINE_LISP): Remove easymenu.elc.
* lib-src/makefile.w32-in (OTHER_PLATFORM_SUPPORT): Remove easymenu.elc.
author | Glenn Morris <rgm@gnu.org> |
---|---|
date | Sun, 24 Oct 2010 17:48:26 -0700 |
parents | a91e94388547 |
children | 376148b31b5e |
rev | line source |
---|---|
84284 | 1 \input texinfo |
2 @c This is an annex of the Emacs manual. | |
3 @c Author: Daniel.Pfeiffer@Informatik.START.dbp.de, fax (+49 69) 7588-2389 | |
84329
3d431f1997d8
(setfilename): Go up one more level to ../../info.
Glenn Morris <rgm@gnu.org>
parents:
84284
diff
changeset
|
4 @setfilename ../../info/autotype |
84284 | 5 @c @node Autotypist, Picture, Abbrevs, Top |
6 @c @chapter Features for Automatic Typing | |
7 @settitle Features for Automatic Typing | |
8 @c @cindex text | |
9 @c @cindex selfinserting text | |
10 @c @cindex autotypist | |
11 | |
12 @copying | |
109274
a91e94388547
Minor doc/misc/*.texi direntry fixes.
Glenn Morris <rgm@gnu.org>
parents:
109264
diff
changeset
|
13 Copyright @copyright{} 1994, 1995, 1999, 2001, 2002, 2003, 2004, 2005, |
a91e94388547
Minor doc/misc/*.texi direntry fixes.
Glenn Morris <rgm@gnu.org>
parents:
109264
diff
changeset
|
14 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. |
84284 | 15 |
16 @quotation | |
17 Permission is granted to copy, distribute and/or modify this document | |
99709
6de181810d0f
Relicense all texi files under FDL 1.3 or later.
Glenn Morris <rgm@gnu.org>
parents:
95936
diff
changeset
|
18 under the terms of the GNU Free Documentation License, Version 1.3 or |
95936
ce35dd677448
Remove references to external license, since doclicense is included.
Glenn Morris <rgm@gnu.org>
parents:
95874
diff
changeset
|
19 any later version published by the Free Software Foundation; with no |
ce35dd677448
Remove references to external license, since doclicense is included.
Glenn Morris <rgm@gnu.org>
parents:
95874
diff
changeset
|
20 Invariant Sections, with the Front-Cover texts being ``A GNU Manual'', |
ce35dd677448
Remove references to external license, since doclicense is included.
Glenn Morris <rgm@gnu.org>
parents:
95874
diff
changeset
|
21 and with the Back-Cover Texts as in (a) below. A copy of the license |
ce35dd677448
Remove references to external license, since doclicense is included.
Glenn Morris <rgm@gnu.org>
parents:
95874
diff
changeset
|
22 is included in the section entitled ``GNU Free Documentation License''. |
84284 | 23 |
95874
eafbd7a5c9be
Update Back-Cover Text as per maintain.info.
Glenn Morris <rgm@gnu.org>
parents:
87903
diff
changeset
|
24 (a) The FSF's Back-Cover Text is: ``You have the freedom to copy and |
eafbd7a5c9be
Update Back-Cover Text as per maintain.info.
Glenn Morris <rgm@gnu.org>
parents:
87903
diff
changeset
|
25 modify this GNU manual. Buying copies from the FSF supports it in |
eafbd7a5c9be
Update Back-Cover Text as per maintain.info.
Glenn Morris <rgm@gnu.org>
parents:
87903
diff
changeset
|
26 developing GNU and promoting software freedom.'' |
84284 | 27 @end quotation |
28 @end copying | |
29 | |
30 @dircategory Emacs | |
31 @direntry | |
109274
a91e94388547
Minor doc/misc/*.texi direntry fixes.
Glenn Morris <rgm@gnu.org>
parents:
109264
diff
changeset
|
32 * Autotype: (autotype). Convenient features for text that you |
a91e94388547
Minor doc/misc/*.texi direntry fixes.
Glenn Morris <rgm@gnu.org>
parents:
109264
diff
changeset
|
33 enter frequently in Emacs. |
84284 | 34 @end direntry |
35 | |
36 @titlepage | |
37 @sp 10 | |
38 | |
39 @center @titlefont{Autotyping} | |
40 @sp 2 | |
41 @center @subtitlefont{Convenient features for text that you enter | |
42 frequently in Emacs} | |
43 @sp 2 | |
44 @center Daniel Pfeiffer | |
45 @center additions by Dave Love | |
46 | |
47 @page | |
48 @vskip 0pt plus 1filll | |
49 @insertcopying | |
50 @end titlepage | |
51 | |
102059
9bcea07061a8
consistently use @insertcopying, @direntry, @contents
Karl Berry <karl@gnu.org>
parents:
100974
diff
changeset
|
52 @contents |
9bcea07061a8
consistently use @insertcopying, @direntry, @contents
Karl Berry <karl@gnu.org>
parents:
100974
diff
changeset
|
53 |
84284 | 54 @node Top |
55 @top Autotyping | |
56 | |
57 Under certain circumstances you will find yourself typing similar things | |
58 over and over again. This is especially true of form letters and programming | |
59 language constructs. Project-specific header comments, flow-control | |
60 constructs or magic numbers are essentially the same every time. Emacs has | |
61 various features for doing tedious and repetitive typing chores for you | |
62 in addition to the Abbrev features (@pxref{(emacs)Abbrevs}). | |
63 | |
64 One solution is using skeletons, flexible rules that say what to | |
65 insert, and how to do it. Various programming language modes offer some | |
66 ready-to-use skeletons, and you can adapt them to suit your needs or | |
67 taste, or define new ones. | |
68 | |
69 Another feature is automatic insertion of what you want into empty files, | |
70 depending on the file-name or the mode as appropriate. You can have a file or | |
71 a skeleton inserted, or you can call a function. Then there is the | |
72 possibility to have Un*x interpreter scripts automatically take on a magic | |
73 number and be executable as soon as they are saved. Or you can have a | |
74 copyright notice's year updated, if necessary, every time you save a | |
75 file. Similarly for time stamps in the file. | |
76 | |
77 URLs can be inserted based on a word at point. Flexible templates can | |
78 be defined for inserting and navigating between text more generally. A | |
79 sort of meta-expansion facility can be used to try a set of alternative | |
80 completions and expansions of text at point. | |
81 | |
102059
9bcea07061a8
consistently use @insertcopying, @direntry, @contents
Karl Berry <karl@gnu.org>
parents:
100974
diff
changeset
|
82 @ifnottex |
9bcea07061a8
consistently use @insertcopying, @direntry, @contents
Karl Berry <karl@gnu.org>
parents:
100974
diff
changeset
|
83 @insertcopying |
9bcea07061a8
consistently use @insertcopying, @direntry, @contents
Karl Berry <karl@gnu.org>
parents:
100974
diff
changeset
|
84 @end ifnottex |
9bcea07061a8
consistently use @insertcopying, @direntry, @contents
Karl Berry <karl@gnu.org>
parents:
100974
diff
changeset
|
85 |
84284 | 86 @menu |
87 * Using Skeletons:: How to insert a skeleton into your text. | |
88 * Wrapping Skeletons:: Putting existing text within a skeleton. | |
89 * Skeletons as Abbrevs:: An alternative for issuing skeleton commands. | |
90 * Skeleton Language:: Making skeleton commands insert what you want. | |
91 * Inserting Pairs:: Typing one character and getting another | |
92 after point. | |
93 * Autoinserting:: Filling up empty files as soon as you visit them. | |
94 * Copyrights:: Inserting and updating copyrights. | |
109264 | 95 * Executables:: Turning interpreter scripts into executables. |
84284 | 96 * Timestamps:: Updating dates and times in modified files. |
97 * QuickURL:: Inserting URLs based on text at point. | |
98 * Tempo:: Flexible template insertion. | |
99 * Hippie Expand:: Expansion of text trying various methods. | |
100 | |
101 * GNU Free Documentation License:: The license for this documentation. | |
102 * Concept Index:: | |
103 * Command Index:: | |
104 * Variable Index:: | |
105 @end menu | |
106 | |
107 | |
108 @node Using Skeletons | |
109 @chapter Using Skeletons | |
110 @cindex skeletons | |
111 @cindex using skeletons | |
112 | |
113 When you want Emacs to insert a form letter or a typical construct of the | |
114 programming language you are using, skeletons are a means of accomplishing | |
115 this. Normally skeletons each have a command of their own, that, when called, | |
116 will insert the skeleton. These commands can be issued in the usual ways | |
117 (@pxref{(emacs)Commands}). Modes that offer various skeletons will often | |
118 bind these to key-sequences on the @kbd{C-c} prefix, as well as having | |
119 an @cite{Insert} menu and maybe even predefined abbrevs for them | |
120 (@pxref{Skeletons as Abbrevs}). | |
121 | |
122 The simplest kind of skeleton will simply insert some text indented | |
123 according to the major mode and leave the cursor at a likely place in the | |
124 middle. Interactive skeletons may prompt you for a string that will be part | |
125 of the inserted text. | |
126 | |
127 Skeletons may ask for input several times. They even have a looping | |
128 mechanism in which you will be asked for input as long as you are willing to | |
129 furnish it. An example would be multiple ``else if'' conditions. You can | |
130 recognize this situation by a prompt ending in @key{RET}, @kbd{C-g} | |
131 or @kbd{C-h}. This | |
132 means that entering an empty string will simply assume that you are finished. | |
133 Typing quit on the other hand terminates the loop but also the rest of the | |
134 skeleton, e.g. an ``else'' clause is skipped. Only a syntactically necessary | |
135 termination still gets inserted. | |
136 | |
137 | |
138 | |
139 @node Wrapping Skeletons | |
140 @chapter Wrapping Skeletons Around Existing Text | |
141 @cindex wrapping skeletons | |
142 | |
143 Often you will find yourself with some code that for whatever reason | |
144 suddenly becomes conditional. Or you have written a bit of text and want to | |
145 put it in the middle of a form letter. Skeletons provide a means for | |
146 accomplishing this, and can even, in the case of programming languages, | |
147 reindent the wrapped code for you. | |
148 | |
149 Skeleton commands take an optional numeric prefix argument | |
150 (@pxref{(emacs)Arguments}). This is interpreted in two different ways depending | |
151 on whether the prefix is positive, i.e. forwards oriented or negative, | |
152 i.e. backwards oriented. | |
153 | |
154 A positive prefix means to wrap the skeleton around that many | |
155 following words. This is accomplished by putting the words there where | |
156 the point is normally left after that skeleton is inserted (@pxref{Using | |
157 Skeletons}). The point (@pxref{(emacs)Point}) is left at the next | |
158 interesting spot in the skeleton instead. | |
159 | |
160 A negative prefix means to do something similar with that many precedingly | |
161 marked interregions (@pxref{(emacs)Mark}). In the simplest case, if you type | |
162 @kbd{M--} just before issuing the skeleton command, that will wrap the | |
163 skeleton around the current region, just like a positive argument would have | |
164 wrapped it around a number of words. | |
165 | |
166 Smaller negative arguments will wrap that many interregions into successive | |
167 interesting spots within the skeleton, again leaving the point at the next one. | |
168 We speak about interregions rather than regions here, because we treat them in | |
169 the order they appear in the buffer, which coincides with successive regions | |
170 only if they were marked in order. | |
171 | |
172 That is, if you marked in alphabetical order the points A B C [] (where [] | |
173 represents the point) and call a skeleton command with @kbd{M-- 3}, you will | |
174 wrap the text from A to B into the first interesting spot of the skeleton, the | |
175 text from B to C into the next one, the text from C to the point into the | |
176 third one, and leave the point in the fourth one. If there are less marks in | |
177 the buffer, or if the skeleton defines less interesting points, the surplus is | |
178 ignored. | |
179 | |
180 If, on the other hand, you marked in alphabetical order the points [] A C B, | |
181 and call a skeleton command with @kbd{M-- 3}, you will wrap the text from | |
182 point to A, then the text from A to C and finally the text from C to B. This | |
183 is done because the regions overlap and Emacs would be helplessly lost if it | |
184 tried to follow the order in which you marked these points. | |
185 | |
186 | |
187 | |
188 @node Skeletons as Abbrevs | |
189 @chapter Skeletons as Abbrev Expansions | |
190 @cindex skeletons as abbrevs | |
191 | |
192 Rather than use a key binding for every skeleton command, you can also | |
193 define an abbreviation (@pxref{(emacs)Defining Abbrevs}) that will expand | |
194 (@pxref{(emacs)Expanding Abbrevs}) into the skeleton. | |
195 | |
196 Say you want @samp{ifst} to be an abbreviation for the C language if | |
197 statement. You will tell Emacs that @samp{ifst} expands to the empty string | |
198 and then calls the skeleton command. In Emacs Lisp you can say something like | |
199 @code{(define-abbrev c-mode-abbrev-table "ifst" "" 'c-if)}. Or you can edit | |
200 the output from @kbd{M-x list-abbrevs} to make it look like this: | |
201 | |
202 @example | |
203 (c-mode-abbrev-table) | |
109264 | 204 "if" 0 "" c-if |
84284 | 205 @end example |
206 | |
207 @noindent | |
208 (Some blank lines of no semantic significance, and other abbrev tables, | |
209 have been omitted.) | |
210 | |
211 | |
212 | |
213 @node Skeleton Language | |
214 @chapter Skeleton Language | |
215 @cindex skeleton language | |
216 | |
217 @findex skeleton-insert | |
218 Skeletons are an shorthand extension to the Lisp language, where various | |
219 atoms directly perform either actions on the current buffer or rudimentary | |
220 flow control mechanisms. Skeletons are interpreted by the function | |
221 @code{skeleton-insert}. | |
222 | |
223 A skeleton is a list starting with an interactor, which is usually a | |
224 prompt-string, or @code{nil} when not needed, but can also be a Lisp | |
225 expression for complex read functions or for returning some calculated value. | |
226 The rest of the list are any number of elements as described in the following | |
227 table: | |
228 | |
229 @table @asis | |
230 @item @code{"@var{string}"}, @code{?@var{c}}, @code{?\@var{c}} | |
231 @vindex skeleton-transformation | |
232 Insert string or character. Literal strings and characters are passed through | |
233 @code{skeleton-transformation} when that is non-@code{nil}. | |
234 @item @code{?\n} | |
235 @c ??? something seems very wrong here. | |
236 Insert a newline and align under current line. Use newline character | |
237 @code{?\n} to prevent alignment. | |
238 @item @code{_} | |
239 Interesting point. When wrapping skeletons around successive regions, they are | |
240 put at these places. Point is left at first @code{_} where nothing is wrapped. | |
241 @item @code{>} | |
242 Indent line according to major mode. When following element is @code{_}, and | |
243 there is a interregion that will be wrapped here, indent that interregion. | |
244 @item @code{&} | |
245 Logical and. Iff preceding element moved point, i.e. usually inserted | |
246 something, do following element. | |
247 @item @code{|} | |
248 Logical xor. Iff preceding element didn't move point, i.e. usually inserted | |
249 nothing, do following element. | |
250 @item @code{-@var{number}} | |
251 Delete preceding number characters. Depends on value of | |
252 @code{skeleton-untabify}. | |
253 @item @code{()} or @code{nil} | |
254 Ignored. | |
255 @item @var{lisp-expression} | |
256 Evaluated, and the return value is again interpreted as a skeleton element. | |
257 @item @code{str} | |
258 A special variable that, when evaluated the first time, usually prompts | |
259 for input according to the skeleton's interactor. It is then set to the | |
260 return value resulting from the interactor. Each subskeleton has its local | |
261 copy of this variable. | |
262 @item @code{v1}, @code{v2} | |
263 Skeleton-local user variables. | |
264 @item @code{'@var{expression}} | |
265 Evaluate following Lisp expression for its side-effect, but prevent it from | |
266 being interpreted as a skeleton element. | |
267 @item @var{skeleton} | |
268 Subskeletons are inserted recursively, not once, but as often as the user | |
269 enters something at the subskeletons interactor. Thus there must be a | |
270 @code{str} in the subskeleton. They can also be used non-interactively, when | |
271 prompt is a lisp-expression that returns successive list-elements. | |
272 @item @code{resume:} | |
273 Ignored. Execution resumes here if the user quits during skeleton | |
274 interpretation. | |
275 @item @code{quit} | |
276 A constant which is non-@code{nil} when the @code{resume:} section was entered | |
277 because the user quit. | |
278 @end table | |
279 | |
280 @findex skeleton-further-elements | |
281 Some modes also use other skeleton elements they themselves defined. For | |
282 example in shell script mode's skeletons you will find @code{<} which does a | |
283 rigid indentation backwards, or in CC mode's skeletons you find the | |
284 self-inserting elements @code{@{} and @code{@}}. These are defined by the | |
285 buffer-local variable @code{skeleton-further-elements} which is a list of | |
286 variables bound while interpreting a skeleton. | |
287 | |
288 @findex define-skeleton | |
289 The macro @code{define-skeleton} defines a command for interpreting a | |
290 skeleton. The first argument is the command name, the second is a | |
291 documentation string, and the rest is an interactor and any number of skeleton | |
292 elements together forming a skeleton. This skeleton is assigned to a variable | |
293 of the same name as the command and can thus be overridden from your | |
294 @file{~/.emacs} file (@pxref{(emacs)Init File}). | |
295 | |
296 | |
297 | |
298 @node Inserting Pairs | |
299 @chapter Inserting Matching Pairs of Characters | |
300 @cindex inserting pairs | |
301 @cindex pairs | |
302 | |
303 Various characters usually appear in pairs. When, for example, you insert | |
304 an open parenthesis, no matter whether you are programming or writing prose, | |
305 you will surely enter a closing one later. By entering both at the same time | |
306 and leaving the cursor inbetween, Emacs can guarantee you that such | |
307 parentheses are always balanced. And if you have a non-qwerty keyboard, where | |
308 typing some of the stranger programming language symbols makes you bend your | |
309 fingers backwards, this can be quite relieving too. | |
310 | |
311 @findex skeleton-pair-insert-maybe | |
312 @vindex skeleton-pair | |
313 This is done by binding the first key (@pxref{(emacs)Rebinding}) of | |
314 the pair to @code{skeleton-pair-insert-maybe} instead of | |
315 @code{self-insert-command}. The ``maybe'' comes from the fact that | |
316 this at-first surprising behavior is initially turned off. To enable | |
317 it, you must set @code{skeleton-pair} to some non-@code{nil} value. | |
318 And even then, a positive argument (@pxref{(emacs)Arguments}) will | |
319 make this key behave like a self-inserting key | |
320 (@pxref{(emacs)Inserting Text}). | |
321 | |
322 @vindex skeleton-pair-on-word | |
323 While this breaks with the stated intention of always balancing pairs, it | |
324 turns out that one often doesn't want pairing to occur, when the following | |
325 character is part of a word. If you want pairing to occur even then, set | |
326 @code{skeleton-pair-on-word} to some non-@code{nil} value. | |
327 | |
328 @vindex skeleton-pair-alist | |
329 Pairing is possible for all visible characters. By default the | |
330 parenthesis @samp{(}, the square bracket @samp{[}, the brace | |
331 @samp{@{}, the pointed bracket @samp{<} and the backquote @samp{`} all | |
332 pair with the symmetrical character. All other characters pair | |
333 themselves. This behavior can be modified by the variable | |
334 @code{skeleton-pair-alist}. This is in fact an alist of skeletons | |
335 (@pxref{Skeleton Language}), with the first part of each sublist | |
336 matching the typed character. This is the position of the interactor, | |
337 but since pairs don't need the @code{str} element, this is ignored. | |
338 | |
339 Some modes have bound the command @code{skeleton-pair-insert-maybe} | |
340 to relevant keys. These modes also configure the pairs as | |
341 appropriate. For example, when typing english prose, you'd expect the | |
342 backquote (@samp{`}) to pair with the quote (@samp{'}), while in Shell | |
343 script mode it must pair to itself. They can also inhibit pairing in | |
344 certain contexts. For example an escaped character stands for itself. | |
345 | |
346 | |
347 | |
348 @node Autoinserting | |
349 @chapter Autoinserting Text in Empty Files | |
350 @cindex autoinserting | |
351 | |
352 @findex auto-insert | |
353 @kbd{M-x auto-insert} will put some predefined text at the beginning of | |
354 the buffer. The main application for this function, as its name suggests, | |
355 is to have it be called automatically every time an empty, and only an | |
356 empty file is visited. This is accomplished by putting @code{(add-hook | |
357 'find-file-hook 'auto-insert)} into your @file{~/.emacs} file | |
358 (@pxref{(emacs)Init File}). | |
359 | |
360 @vindex auto-insert-alist | |
361 What gets inserted, if anything, is determined by the variable | |
362 @code{auto-insert-alist}. The @sc{car}s of this list are each either | |
363 a mode name, making an element applicable when a buffer is in that | |
364 mode. Or they can be a string, which is a regexp matched against the | |
365 buffer's file name. In that way different kinds of files that have | |
366 the same mode in Emacs can be distinguished. The @sc{car}s may also | |
367 be cons cells consisting of mode name or regexp as above and an | |
368 additional descriptive string. | |
369 | |
370 When a matching element is found, the @sc{cdr} says what to do. It may | |
371 be a string, which is a file name, whose contents are to be inserted, if | |
372 that file is found in the directory @code{auto-insert-directory} or under a | |
373 absolute file name. Or it can be a skeleton (@pxref{Skeleton Language}) to | |
374 be inserted. | |
375 | |
376 It can also be a function, which allows doing various things. The function | |
377 can simply insert some text, indeed, it can be skeleton command (@pxref{Using | |
378 Skeletons}). It can be a lambda function which will for example conditionally | |
379 call another function. Or it can even reset the mode for the buffer. If you | |
380 want to perform several such actions in order, you use a vector, i.e. several | |
381 of the above elements between square brackets (@samp{[@r{@dots{}}]}). | |
382 | |
383 By default C and C++ headers insert a definition of a symbol derived from | |
384 the filename to prevent multiple inclusions. C and C++ sources insert an | |
385 include of the header. Makefiles insert the file makefile.inc if it exists. | |
386 | |
387 TeX and bibTeX mode files insert the file tex-insert.tex if it exists, while | |
388 LaTeX mode files insert a typical @code{\documentclass} frame. Html | |
389 files insert a skeleton with the usual frame. | |
390 | |
391 Ada mode files call the Ada header skeleton command. Emacs lisp | |
392 source files insert the usual header, with a copyright of your | |
393 environment variable @env{$ORGANIZATION} or else the FSF, and prompt | |
394 for valid keywords describing the contents. Files in a @file{bin} | |
395 directory for which Emacs could determine no specialized mode | |
396 (@pxref{(emacs)Choosing Modes}) are set to Shell script mode. | |
397 | |
398 @findex define-auto-insert | |
399 In Lisp (@pxref{(emacs)Init File}) you can use the function | |
400 @code{define-auto-insert} to add to or modify | |
401 @code{auto-insert-alist}. See its documentation with @kbd{C-h f | |
402 define-auto-insert}. | |
403 | |
404 @vindex auto-insert | |
405 The variable @code{auto-insert} says what to do when @code{auto-insert} is | |
406 called non-interactively, e.g. when a newly found file is empty (see above): | |
407 @table @asis | |
408 @item @code{nil} | |
409 Do nothing. | |
410 @item @code{t} | |
411 Insert something if possible, i.e. there is a matching entry in | |
412 @code{auto-insert-alist}. | |
413 @item other | |
414 Insert something if possible, but mark as unmodified. | |
415 @end table | |
416 | |
417 @vindex auto-insert-query | |
418 The variable @code{auto-insert-query} controls whether to ask about | |
419 inserting something. When this is @code{nil}, inserting is only done with | |
420 @kbd{M-x auto-insert}. When this is @code{function}, you are queried | |
421 whenever @code{auto-insert} is called as a function, such as when Emacs | |
422 visits an empty file and you have set the above-mentioned hook. Otherwise | |
423 you are alway queried. | |
424 | |
425 @vindex auto-insert-prompt | |
426 When querying, the variable @code{auto-insert-prompt}'s value is used as a | |
427 prompt for a y-or-n-type question. If this includes a @samp{%s} construct, | |
428 that is replaced by what caused the insertion rule to be chosen. This is | |
429 either a descriptive text, the mode-name of the buffer or the regular | |
430 expression that matched the filename. | |
431 | |
432 | |
433 | |
434 @node Copyrights | |
435 @chapter Inserting and Updating Copyrights | |
436 @cindex copyrights | |
437 | |
438 @findex copyright | |
439 @kbd{M-x copyright} is a skeleton inserting command, that adds a copyright | |
440 notice at the point. The ``by'' part is taken from your environment variable | |
441 @env{$ORGANIZATION} or if that isn't set you are prompted for it. If the | |
442 buffer has a comment syntax (@pxref{(emacs)Comments}), this is inserted as a comment. | |
443 | |
444 @findex copyright-update | |
445 @vindex copyright-limit | |
446 @vindex copyright-current-year | |
447 @kbd{M-x copyright-update} looks for a copyright notice in the first | |
448 @code{copyright-limit} characters of the buffer and updates it when necessary. | |
449 The current year (variable @code{copyright-current-year}) is added to the | |
450 existing ones, in the same format as the preceding year, i.e. 1994, '94 or 94. | |
451 If a dash-separated year list up to last year is found, that is extended to | |
452 current year, else the year is added separated by a comma. Or it replaces | |
453 them when this is called with a prefix argument. If a header referring to a | |
454 wrong version of the GNU General Public License (@pxref{(emacs)Copying}) is found, | |
455 that is updated too. | |
456 | |
457 An interesting application for this function is to have it be called | |
458 automatically every time a file is saved. This is accomplished by | |
459 putting @code{(add-hook 'before-save-hook 'copyright-update)} into | |
460 your @file{~/.emacs} file (@pxref{(emacs)Init File}). Alternative, | |
461 you can do @kbd{M-x customize-variable @key{RET} before-save-hook | |
462 @key{RET}}. @code{copyright-update} is conveniently listed as an | |
463 option in the customization buffer. | |
464 | |
465 @vindex copyright-query | |
466 The variable @code{copyright-query} controls whether to update the | |
467 copyright or whether to ask about it. When this is @code{nil} updating is | |
468 only done with @kbd{M-x copyright-update}. When this is @code{function} | |
469 you are queried whenever @code{copyright-update} is called as a function, | |
470 such as in the @code{before-save-hook} feature mentioned above. Otherwise | |
471 you are always queried. | |
472 | |
473 | |
474 | |
475 @node Executables | |
476 @chapter Making Interpreter Scripts Executable | |
477 @cindex executables | |
478 | |
479 @vindex executable-prefix | |
480 @vindex executable-chmod | |
481 Various interpreter modes such as Shell script mode or AWK mode will | |
482 automatically insert or update the buffer's magic number, a special | |
483 comment on the first line that makes the @code{exec} systemcall know | |
484 how to execute the script. To this end the script is automatically | |
485 made executable upon saving, with @code{executable-chmod} as argument | |
486 to the system @code{chmod} command. The magic number is prefixed by | |
487 the value of @code{executable-prefix}. | |
488 | |
489 @vindex executable-magicless-file-regexp | |
490 Any file whose name matches @code{executable-magicless-file-regexp} is not | |
491 furnished with a magic number, nor is it made executable. This is mainly | |
492 intended for resource files, which are only meant to be read in. | |
493 | |
494 @vindex executable-insert | |
495 The variable @code{executable-insert} says what to do when | |
496 @code{executable-set-magic} is called non-interactively, e.g. when file has no | |
497 or the wrong magic number: | |
498 @table @asis | |
499 @item @code{nil} | |
500 Do nothing. | |
501 @item @code{t} | |
502 Insert or update magic number. | |
503 @item other | |
504 Insert or update magic number, but mark as unmodified. | |
505 @end table | |
506 | |
507 @findex executable-set-magic | |
508 @vindex executable-query | |
509 The variable @code{executable-query} controls whether to ask about | |
510 inserting or updating the magic number. When this is @code{nil} updating | |
511 is only done with @kbd{M-x executable-set-magic}. When this is | |
512 @code{function} you are queried whenever @code{executable-set-magic} is | |
513 called as a function, such as when Emacs puts a buffer in Shell script | |
514 mode. Otherwise you are alway queried. | |
515 | |
516 @findex executable-self-display | |
517 @kbd{M-x executable-self-display} adds a magic number to the buffer, which | |
518 will turn it into a self displaying text file, when called as a Un*x command. | |
519 The ``interpreter'' used is @code{executable-self-display} with argument | |
520 @samp{+2}. | |
521 | |
522 @node Timestamps | |
523 @chapter Maintaining Timestamps in Modified Files | |
524 @cindex timestamps | |
525 | |
526 @findex time-stamp | |
527 @vindex before-save-hook | |
528 The @code{time-stamp} command can be used to update automatically a | |
529 template in a file with a new time stamp every time you save the file. | |
530 Customize the hook @code{before-save-hook} to add the function | |
531 @code{time-stamp} to arrange this. It you use Custom to do this, | |
532 then @code{time-stamp} is conveniently listed as an option in the | |
533 customization buffer. | |
534 | |
535 @vindex time-stamp-active | |
536 @vindex time-stamp-format | |
537 @vindex time-stamp-start | |
538 The time stamp is updated only if the customizable variable | |
539 @code{time-stamp-active} is on, which it is by default; the command | |
540 @code{time-stamp-toggle-active} can be used to toggle it. The format of | |
541 the time stamp is set by the customizable variable | |
542 @code{time-stamp-format}. | |
543 | |
544 @vindex time-stamp-line-limit | |
545 @vindex time-stamp-end | |
546 @vindex time-stamp-count | |
547 @vindex time-stamp-inserts-lines | |
548 The variables @code{time-stamp-line-limit}, @code{time-stamp-start}, | |
549 @code{time-stamp-end}, @code{time-stamp-count}, and | |
550 @code{time-stamp-inserts-lines} control finding the template. Do not | |
551 change these in your init file or you will be incompatible with other | |
552 people's files. If you must change them, do so only in the local | |
553 variables section of the file itself. | |
554 | |
555 Normally the template must appear in the first 8 lines of a file and | |
556 look like one of the following: | |
557 | |
558 @example | |
559 Time-stamp: <> | |
560 Time-stamp: " " | |
561 @end example | |
562 | |
563 The time stamp is written between the brackets or quotes: | |
564 | |
565 @example | |
566 Time-stamp: <1998-02-18 10:20:51 gildea> | |
567 @end example | |
568 | |
569 @node QuickURL | |
570 @chapter QuickURL: Inserting URLs Based on Text at Point | |
571 | |
572 @vindex quickurl-url-file | |
573 @findex quickurl | |
574 @cindex URLs | |
575 @kbd{M-x quickurl} can be used to insert a URL into a buffer based on | |
576 the text at point. The URLs are stored in an external file defined by | |
577 the variable @code{quickurl-url-file} as a list of either cons cells of | |
578 the form @code{(@var{key} . @var{URL})} or | |
579 lists of the form @code{(@var{key} @var{URL} @var{comment})}. These | |
580 specify that @kbd{M-x quickurl} should insert @var{URL} if the word | |
581 @var{key} is at point, for example: | |
582 | |
583 @example | |
584 (("FSF" "http://www.fsf.org/" "The Free Software Foundation") | |
585 ("emacs" . "http://www.emacs.org/") | |
586 ("hagbard" "http://www.hagbard.demon.co.uk" "Hagbard's World")) | |
587 @end example | |
588 | |
589 @findex quickurl-add-url | |
590 @findex quickurl-list | |
591 @kbd{M-x quickurl-add-url} can be used to add a new @var{key}/@var{URL} | |
592 pair. @kbd{M-x quickurl-list} provides interactive editing of the URL | |
593 list. | |
594 | |
595 @node Tempo | |
596 @chapter Tempo: Flexible Template Insertion | |
597 | |
598 @cindex templates | |
599 The Tempo package provides a simple way to define powerful templates, or | |
600 macros, if you wish. It is mainly intended for, but not limited to, | |
601 programmers to be used for creating shortcuts for editing | |
602 certain kinds of documents. | |
603 | |
604 @findex tempo-backward-mark | |
605 @findex tempo-forward-mark | |
606 A template is defined as a list of items to be inserted in the current | |
607 buffer at point. Some can be simple strings, while others can control | |
608 formatting or define special points of interest in the inserted text. | |
609 @kbd{M-x tempo-backward-mark} and @kbd{M-x tempo-forward-mark} can be | |
610 used to jump between such points. | |
611 | |
612 More flexible templates can be created by including Lisp symbols, which | |
613 will be evaluated as variables, or lists, which will be evaluated | |
614 as Lisp expressions. Automatic completion of specified tags to expanded | |
615 templates can be provided. | |
616 | |
617 @findex tempo-define-template | |
618 See the documentation for @code{tempo-define-template} for the different | |
619 items that can be used to define a tempo template with a command for | |
620 inserting it. | |
621 | |
622 See the commentary in @file{tempo.el} for more information on using the | |
623 Tempo package. | |
624 | |
625 @node Hippie Expand | |
626 @chapter `Hippie' Expansion | |
627 | |
628 @findex hippie-expand | |
629 @kindex M-/ | |
630 @vindex hippie-expand-try-functions-list | |
631 @kbd{M-x hippie-expand} is a single command providing a variety of | |
632 completions and expansions. Called repeatedly, it tries all possible | |
633 completions in succession. | |
634 | |
635 Which ones to try, and in which order, is determined by the contents of | |
636 the customizable option @code{hippie-expand-try-functions-list}. Much | |
637 customization of the expansion behavior can be made by changing the | |
638 order of, removing, or inserting new functions in this list. Given a | |
639 positive numeric argument, @kbd{M-x hippie-expand} jumps directly that | |
640 number of functions forward in this list. Given some other argument (a | |
641 negative argument or just @kbd{C-u}) it undoes the tried completion. | |
642 | |
643 See the commentary in @file{hippie-exp.el} for more information on the | |
644 possibilities. | |
645 | |
646 Typically you would bind @code{hippie-expand} to @kbd{M-/} with | |
647 @code{dabbrev-expand}, the standard binding of @kbd{M-/}, providing one | |
648 of the expansion possibilities. | |
649 | |
650 @node GNU Free Documentation License | |
651 @appendix GNU Free Documentation License | |
652 @include doclicense.texi | |
653 | |
654 @node Concept Index | |
655 @unnumbered Concept Index | |
656 @printindex cp | |
657 | |
658 @node Command Index | |
659 @unnumbered Command Index | |
660 @printindex fn | |
661 | |
662 @node Variable Index | |
663 @unnumbered Variable Index | |
664 @printindex vr | |
665 | |
666 @bye | |
667 | |
668 @ignore | |
669 arch-tag: 54001b27-5ef8-4a9d-a199-905d650fafba | |
670 @end ignore |