annotate msdos/ChangeLog @ 33632:d9f6fa9e0caf

*** empty log message ***

2000-11-13  Eli Zaretskii  <[e-mail]>

	* sed2.inp (HAVE_MKSTEMP): Define.

2000-10-07  Eli Zaretskii  <[e-mail]>

	* sedleim.inp (RUN-EMACS): Remove EMACSLOADPATH setting as part of
	the command; use Make's "export EMACSLOADPATH=" instead.  Remove
	the handling of `command` expansion, leim/Makefile.in doesn't use
	that anymore.

2000-08-29  Eli Zaretskii  <[e-mail]>

	* sed2.inp (HAVE_INDEX, HAVE_RINDEX): Define.

2000-08-22  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (TAGS): Don't use [a-zA-Z]*, as it causes wildcard
	expansion to become case-sensitive and return all file names in
	upper case on plain DOS.

2000-08-05  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (src): Put gdb.tmp after -a, since djecho's -a
	switch requires an argument.

2000-07-31  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (src): Make the rule faster by using a single djecho
	command instead of multiple redir invocations.
	(install): Speed up by using a command.com's for loop.

2000-07-23  Eli Zaretskii  <[e-mail]>

	* sed3v2.inp: Define ALLOCA to an empty string.

2000-07-18  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp: Put getloadavg.o into LIBOBJS, not GETLOADAVG_LIBS.

2000-07-09  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp: Set LIBSOUND to an empty string.

2000-06-26  Eli Zaretskii  <[e-mail]>

	* sed2.inp: Define HAVE_STRUCT_TIMEZONE in src/config.h.

2000-06-25  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp: Set GETLOADAVG_LIBS to getloadavg.o in src/Makefile.

2000-06-18  Eli Zaretskii  <[e-mail]>

	* sedlisp.inp (srcdir): Edit this variable.

2000-06-15  Eli Zaretskii  <[e-mail]>

	* sedlisp.inp: New file.

2000-05-18  Eli Zaretskii  <[e-mail]>

	* sed6.inp: Changes to allow "make foo.dvi" on DJGPP platforms:
	(ENVADD): Redefine as empty, to avoid requiring a Unixy shell.
	(TEXINPUTS): Use semi-colon; export explicitly.
	(MAKEINFO): Export explicitly.

2000-05-01  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (install): Install ebrowse.exe.

2000-04-14  Dave Love  <[e-mail]>

	* sed1v2.inp, sed1.inp: Add LIBS, LIBOBJS.

2000-03-13  Eli Zaretskii  <[e-mail]>

	* sed2.inp: Add PROTOTYPES and POINTER_TYPE, per the new
	config.in.

2000-01-27  Eli Zaretskii  <[e-mail]>

	* sed2.inp (HAVE_SETITIMER): Define.

1999-11-18  Eli Zaretskii  <[e-mail]>

	* sed2.inp (HAVE_TM_GMTOFF, HAVE_MBLEN): Define.

	* sed1v2.inp: Convert "LC_ALL=C ./temacs" to MS-DOS equivalent.

1999-07-29  Eli Zaretskii  <[e-mail]>

	* sedleim.inp (SHELL, MAKESHELL): Use /xyzzy/command as the shell.

After the release of 20.4, development was split into two separate
code lines.  One line contained the code for Emacs 21, and the other
one the code for the 20.x releases after 20.4.  The following change
log entries up to the entry ``20.4 released'' are for the 20.x code
line.  Change logs above this notice are those for the 21.x code line.

2000-06-13  Gerd Moellmann  <[e-mail]>

	* Version 20.7 released.
	
2000-02-26  Gerd Moellmann  <[e-mail]>

	* Version 20.6 released.
	
1999-12-04  Gerd Moellmann  <[e-mail]>

	* Version 20.5 released.
	
1999-07-29  Eli Zaretskii  <[e-mail]>

	* sedleim.inp (SHELL, MAKESHELL): Use /xyzzy/command as the shell.

1999-07-12  Richard Stallman  <[e-mail]>

	* Version 20.4 released.

1999-07-01  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (SHELL, MAKESHELL): Don't use /dos/command, it can
	invoke an incompatible version of COMAMND.COM.

1999-05-19  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp: Use -gcoff instead of -g in CFLAGS, for those who
	have GCC configured by default to use stabs, which unexec.c
	doesn't currently support.

1999-01-14  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (install): Use update instead of sed to install fns.el.

1999-01-11  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (install): Install fns.el in ../bin, since Emacs
	looks for it in exec-directory.

1999-01-07  Eli Zaretskii  <[e-mail]>

	* sedleim.inp: New file, for configuring the leim directory.

	* mainmake.v2 (src): Build files in leim if leim/Makefile exists.
	(clean): Add clean in leim.

1998-11-08  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (SHELL, MAKESHELL): Don't use `override'.

1998-10-20  Eli Zaretskii  <[e-mail]>

	* mainmake.v2: Forcibly set SHELL and MAKESHELL to force Make to
	use COMMAND.COM as the shell.

1998-08-19  Richard Stallman  <[e-mail]>

	* Version 20.3 released.

1998-05-04  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (TAGS tags): Fix file name wildcards in lisp
	directory.

1998-04-13  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (src): Replace topdir with top_srcdir in commands
	which generate gdb.ini.

1998-04-12  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (version): Determine emacs-version from
	lisp/version.el.  Pass it to sub-Make's.

1998-04-05  Eli Zaretskii  <[e-mail]>

	* sed3v2.inp: When installing ${version},
	do it replacing @version@.

	* mainmake.v2 (version): Compute the version from lisp/version.el
	and pass to sub-Make's.  Pass top_srcdir to sub-Make's.

1997-11-20  Eli Zaretskii  <[e-mail]>

	* sed6.inp: New file, configures the man directory for MSDOS.

	* mainmake.v2 (man): New target to build the manual.
	(all): Add the man dependency.
	(install): Change bin\\nul to bin\nul.

1997-09-19  Richard Stallman  <[e-mail]>

	* Version 20.2 released.

1997-09-15  Richard Stallman  <[e-mail]>

	* Version 20.1 released.

1997-09-07  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp: Enlarge the stack size of temacs to 100KB.

1997-08-13  Eli Zaretskii  <[e-mail]>

	* sed2.inp: (EMACS_CONFIGURATION): Set to i386-pc-msdosdjgpp.

1997-08-10 +03  Eli Zaretskii  <[e-mail]>

	* sed1v2.inp (CPPFLAGS, LDFLAGS): Edit to empty.

1997-07-10  Eli Zaretskii  <[e-mail]>

	* sed2.inp (HAVE_LOGB, HAVE_FREXP, HAVE_FMOD, HAVE_RINT)
	(HAVE_CBRT, HAVE_FPATHCONF, HAVE_SETRLIMIT): Defined.

	* sed1.inp, sed1v2.inp: Remove `stamp-oldxmenu' dependency, so
	MSDOS users won't need `touch' installed.

	* mainmake.v2 (TAGS, tags): Include new lisp subdirectories.

1996-08-11  Richard Stallman  <[e-mail]>

	* Version 19.33 released.

1996-08-04  Richard Stallman  <[e-mail]>

	* is_exec.c: Renamed from is-exec.c.

1996-07-27  Richard Stallman  <[e-mail]>

	* Version 19.32 released.

	* is-exec.c, sigaction.c: New files.

1996-07-24  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (TAGS): Make sure bin/etags.exe is current.  Make
	the rules always generate TAGS.

1996-06-09  Eli Zaretskii  <[e-mail]>

	* sed2.inp: Don't undef MULTI_FRAME.

1996-05-25  Karl Heuer  <[e-mail]>

	* Version 19.31 released.

1996-04-17  Eli Zaretskii  <[e-mail]>

	* sed1.inp: Replace `make-docfile' with `make-doc.exe'.  In case
	src/Makefile needs to rebuild `make-doc.exe', use one command per line.
	Undo the previous change.
	
1996-04-15  Richard Stallman  <[e-mail]>

	* sed1.inp: Change make-docfile to make-doc.exe in a second place. 

1996-04-15  Eli Zaretskii  <[e-mail]>

	* mainmake.v2 (src): Create a file with sed commands instead of using
	a long sed command line (some versions of Sed don't handle that).
	(gdb): Merged back into src, undoing April 13 change.
	(install): Do use if statements, but not a loop.
	
1996-04-13  Richard Stallman  <[e-mail]>

	* mainmake.v2 (gdb): New target, broken out of src.
	(install): Use simple explicit copy commands, not a loop.

1996-04-10  Eli Zaretskii  <[e-mail]>

	* sed2.inp: Under DJGPP v2, use <sys/config.h> instead of most of
	config.h.in.

	* sed1v2.inp, sed3v2.inp, mainmake.v2: New files.

1996-01-23  Karl Heuer  <[e-mail]>

	* sed2.inp (LOCALTIME_CACHE, HAVE_TZSET): Define these.

1995-11-24  Richard Stallman  <[e-mail]>

	* Version 19.30 released.

1995-11-21  Richard Stallman  <[e-mail]>

	* sed3.inp: Alter test-distrib to test-dis.

1995-11-03  Karl Heuer  <[e-mail]>

	* mainmake (install): Don't mv make-doc.exe into ../bin/.

1995-10-11  Kim Storm  <[e-mail]>

	* sed1.inp: Call make-doc.exe instead of make-docfile.

1995-06-08  Karl Heuer  <[e-mail]>

	* sed2.inp: Define STDC_HEADERS.
	Undefine MULTI_FRAME, until somebody fixes msdos.h and msdos.c.

1995-01-20  Karl Heuer  <[e-mail]>

	* sed3.inp: Fix sed append command to behave as intended.

1995-01-20  Morten Welinder  <[e-mail]>

	* sed3.inp: Delete mysterious dot.  Add comment to protect blank
	line at end of file.  Make sure make-docfile is compiled.

1995-01-10  Karl Heuer  <[e-mail]>

	* sed3.inp: Use coff2exe on make-docfile.
	* sed1.inp: Not go32, which has problems with long arg lists.

1994-10-17  Morten Welinder  <[e-mail]>

	* sed1.inp: Handle "\t#"-style comments.
	(obj): Don't add any files -- now done in src/makefile.in.in
	(temacs): Don't depend on prefix-args.
	(DOC): Reflect makefile changes regarding two-batch run.

	* sed2.inp: Add comments showing how to use the system malloc.
	(EMACS_CONFIG_OPTIONS): Set though not useful.
	(HAVE_MKTIME): Define.

	* mainmake (clean): Add target.

	* sed1x.inp, sed2x.inp, sed5x.inp: New files for X configuration.


1994-07-14  Morten Welinder  ([e-mail])

	* sed2.inp (HAVE_STRERROR): Define.

1994-07-08  Morten Welinder  ([e-mail])

	* sed1.inp, sed2.inp: Use "m/intel386" instead of "m/dos386.h".

1994-06-01  Morten Welinder  ([e-mail])

	* sed4.inp: New file for configuring src/paths.h.

1994-05-30  Richard Stallman  ([e-mail])

	* Version 19.25 released.

1994-05-22  Morten Welinder  ([e-mail])

	* sed1.inp: Adding dos-fns.elc to the set of lisp files was moved
	to src/makefile.in.in.

1994-05-20  Morten Welinder  ([e-mail])

	* sed2.inp: Reflect change from CONFIGURATION to EMACS_CONFIGURATION.
	Also set it to correct three-part value.

1994-05-16  Morten Welinder  ([e-mail])

	* Version 19.23 released.

	* sed1.inp: Don't use `+' in regexps as different stream
	editors interpret them differently.  Use `*' instead.

1994-05-12  Morten Welinder  ([e-mail])

	* mainmake (install): Set the minimum stack (for running under
	DPMI) to 512K.  Avoid using wildcard for matching one file.

1994-05-08  Morten Welinder  ([e-mail])

	* sed3.inp: Don't pass version to [ce]tags.

1994-04-30  Morten Welinder  ([e-mail])

	* sed1.inp: don't comment out the inc-vers run as that
	does not exist anymore.
	Don't reset DEBUG_MOLE as that no longer is used.
	Identify the file being patched as src/...
	* sed2.inp: Identify the file being patched as src/...
	* sed3.inp: We don't have to have the version number in here
	anymore.  Instead we patch the way it is passed from make to
	the C compiler.

1994-04-29  Morten Welinder  ([e-mail])

	* sed1.inp: Set CFLAGS=-O2, not -g.  Handle the new
	M_FILE, S_FILE, and SET_MAKE defines.  Get rid of ^Ms.

	* sed2.inp: We have bcmp.  Configuration is "msdos".
	Get rid of ^Ms.

	* sed3.inp: Set CFLAGS=-O2, not -g.  Correct for
	new configuration regarding utilities not to compile.
	Fix version number.  Get rid of ^Ms.

1994-01-08  Morten Welinder  ([e-mail])

	* sed3.inp: improve make-compatibility by not using drive
	specifications and by not specifying an explicit shell.

1994-01-07  Morten Welinder  ([e-mail])

	* sed1.inp: Incorporate the actions of patch1.
	* patch1: File deleted.

1993-01-05  Morten Welinder  ([e-mail])

	* mainmake: New file, makefile for the main directory.

	* patch1: New file.  Context diff to turn src/makefile.in into
	a msdos version called makefile.

	* emacs.pif: New file, program information file for Emacs under
	Windows.  (This file contains non-printable characters.)

	* emacs.ico: New file, icon for Emacs under Windows.  It's so ugly
	that someone is bound to create a better.  Mail uuencoded icons
	to [e-mail], but be prepared to sign a copyright disclaimer.
	(This file contains non-printable characters.)

	* sed3.inp: New file for changing lib-src/makefile.in into 
	lib-src/makefile.

	* sed2.inp: New file for changing src/config.h-in into src/config.h

	* sed1.inp: New file for changing src/makefile.in.in into src/makefile

;; Local Variables:
;; coding: iso-2022-7bit-unix
;; End: