annotate src/s/usg5-3.h @ 53226:dd3018b4785b

Implemented multiple tty support. README.multi-tty: New file. src/termchar.h (struct terminal): Renamed to struct tty_output. Added name, type, input, output, termscript, old_tty, term_initted, old_tty_valid, background_pixel, foreground_pixel, next fields. (TERMINAL_*): Renamed to TTY_* for brevity. (CURRENT_TERMINAL): Renamed to CURTTY for brevity. (tty_list): New variable. (TERMINAL_PTR): Removed. (FRAME_TTY): New function. (TTY_NAME, TTY_TYPE): New macros. src/term.c (current_terminal): Removed. (_current_terminal): Removed. (tty_list): New variable. (OUTPUT, OUTPUT1, OUTPUTL, OUTPUT_IF, OUTPUT1_IF): Added tty parameter. (set_terminal_modes): Added tty parameter. (reset_terminal_modes): Added tty parameter. (cursor_to, raw_cursor_to): Updated cmgoto() calls. (clear_end_of_line, write_glyphs): Add indirection to terminal output, updated cmcheckmagic() calls. (get_named_tty): New function. (term_dummy_init): New function. (term_init): Added name parameter, added tty_output return value. Changed algorithm to update tty_list. Call init_sys_modes() to set up tty mode on the newly opened terminal device. (get_current_tty): New function, intended for debugging. src/termhooks.h (termscript): Removed. src/w32term.h (FRAME_FOREGROUND_PIXEL, FRAME_BACKGROUND_PIXEL): Removed redundant definition. src/macterm.h (FRAME_FOREGROUND_PIXEL, FRAME_BACKGROUND_PIXEL): Ditto. src/window.c (init_window_once): Call make_terminal_frame with two zero parameters. src/cm.h (emacs_tputs): New macro to set current_tty, and then call tputs(). (current_tty): New variable, for cmputc(). (cmcheckmagic, cmputc, cmgoto): Added prototypes. src/cm.c (current_tty): New variable, for cmputc(). (cmputc): Use it. (cmcheckmagic): Added tty parameter, look up terminal streams there. (calccost): Added tty parameter. Use emacs_tputs() instead of tputs(). (cmgoto): Added tty parameter. Pass it on to calccost(). Use emacs_tputs() instead of tputs(). src/dispextern.h (set_terminal_modes, reset_terminal_modes): Added tty parameter. (term_init): Added name parameter (the filename of the terminal device). Added return value (struct tty_output). src/dispnew.c: Replace CURTTY() with local variables throughout the file (where applicable). (termscript): Moved to struct tty_output. (terminal_type): Removed. src/emacs.c (main): Don't call init_sys_modes(), the new term_init() already does that during init_display(). (shut_down_emacs): Call reset_all_sys_modes() instead of reset_sys_modes(). src/frame.c (Qtty, Qtty_type): New variables. (syms_of_frame): Initialize them. (tty_display): Removed. (make_terminal_frame): New parameters (tty filename and type). Initialize output_data.tty field instead of output_data.x. Use term_init() to find the right tty_output. (Use term_dummy_init() during bootstrap.) (Fmake_terminal_frame): Get device filename and type from frame parameters. src/frame.h (FRAME_FOREGROUND_PIXEL, FRAME_BACKGROUND_PIXEL): Do the right thing if the frame is a tty. (struct frame): New member in output_data: tty. (make_terminal_frame): Updated of prototype. src/keyboard.c (Fset_input_mode): Call reset_all_sys_modes(), not reset_sys_modes(). Ditto with init_sys_modes(). src/lisp.h (tty_output): Added forward declaration. (init_sys_modes, reset_sys_modes): Updated prototype. (init_all_sys_modes, reset_all_sys_modes): New prototypes. src/scroll.c: Replace CURTTY() with local variables throughout the file (where applicable). src/sysdep.c (old_tty, term_initted, old_tty_valid): Moved to struct tty_output.( (init_all_sys_modes): New function. (init_sys_modes): Added tty_output parameter. Use it. (reset_all_sys_modes): New function. (reset_sys_modes): Added tty_output parameter. Use it. src/Makefile.in: Update dependencies. git-archimport-id: [e-mail]--2004/emacs--multi-tty--0--patch-2

/* Definitions file for GNU Emacs running on AT&T's System V Release 3
   Copyright (C) 1987, 1999 Free Software Foundation, Inc.

This file is part of GNU Emacs.

GNU Emacs is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.

GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU Emacs; see the file COPYING.  If not, write to
the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA.  */


/*
 *	Define symbols to identify the version of Unix this is.
 *	Define all the symbols that apply correctly.
 */

#define USG				/* System III, System V, etc */

#define USG5

#define USG5_3

/* SYSTEM_TYPE should indicate the kind of system you are using.
 It sets the Lisp variable system-type.  */

#define SYSTEM_TYPE "usg-unix-v"

/* nomultiplejobs should be defined if your system's shell
 does not have "job control" (the ability to stop a program,
 run some other program, then continue the first one).  */

#define NOMULTIPLEJOBS

/* Default is to set interrupt_input to 0: don't do input buffering within Emacs */

/* #define INTERRUPT_INPUT */

/* Letter to use in finding device name of first pty,
  if system supports pty's.  'p' means it is /dev/ptyp0  */

#define FIRST_PTY_LETTER 'p'

/*
 *	Define HAVE_TERMIO if the system provides sysV-style ioctls
 *	for terminal control.
 */

#define HAVE_TERMIO

/*
 *	Define HAVE_PTYS if the system supports pty devices.
 */

/* Some versions of V.3 have this, but not all.
   #define HAVE_PTYS
   #define SYSV_PTYS  */

/* Define HAVE_SOCKETS if system supports 4.2-compatible sockets.  */

/* #define HAVE_SOCKETS */

/*
 *	Define NONSYSTEM_DIR_LIBRARY to make Emacs emulate
 *      The 4.2 opendir, etc., library functions.
 */

/* #define NONSYSTEM_DIR_LIBRARY */

/*
 * 	Define SYSV_SYSTEM_DIR to use the V.3 getdents/readir
 *	library functions.  Almost, but not quite the same as
 *	the 4.2 functions
 */
#define SYSV_SYSTEM_DIR

/* Define this symbol if your system has the functions bcopy, etc. */

/* #define BSTRING */

/* subprocesses should be defined if you want to
 have code for asynchronous subprocesses
 (as used in M-x compile and M-x shell).
 This is supposed to work now on system V release 2.  */

#define subprocesses

/* If your system uses COFF (Common Object File Format) then define the
   preprocessor symbol "COFF". */

#define COFF

/* define MAIL_USE_FLOCK if the mailer uses flock
   to interlock access to /usr/spool/mail/$USER.
   The alternative is that a lock file named
   /usr/spool/mail/$USER.lock.  */

/* #define MAIL_USE_FLOCK */

/* Define CLASH_DETECTION if you want lock files to be written
   so that Emacs can tell instantly when you try to modify
   a file that someone else has modified in his Emacs.  */

/* #define CLASH_DETECTION */

/* Define SHORTNAMES if the C compiler can distinguish only
   short names.  It means that the stuff in ../shortnames
   must be run to convert the long names to short ones.  */

/* #define SHORTNAMES */

/* The file containing the kernel's symbol table is called /unix.  */

#define KERNEL_FILE "/unix"

/* The symbol in the kernel where the load average is found
   is named avenrun.  */

#define LDAV_SYMBOL "avenrun"

/* Define this if system V IPC is available.  */

#define HAVE_SYSVIPC

/* Special hacks needed to make Emacs run on this system.  */

/*
 *	Make the sigsetmask function go away.  Don't know what the
 *	ramifications of this are, but doesn't seem possible to
 *	emulate it properly anyway at this point.
 */

#define sigsetmask(mask)	/* Null expansion */

/* setjmp and longjmp can safely replace _setjmp and _longjmp,
   but they will run slower.  */

#define _setjmp setjmp
#define _longjmp longjmp

/* On USG systems these have different names */
#ifndef HAVE_INDEX
#define index strchr
#endif /* ! defined (HAVE_INDEX) */
#ifndef HAVE_RINDEX
#define rindex strrchr
#endif /* ! defined (HAVE_RINDEX) */

/* USG systems tend to put everything declared static
   into the initialized data area, which becomes pure after dumping Emacs.
   Foil this.  Emacs carefully avoids static vars inside functions.  */

#define static

/* Compiler bug bites on many systems when default ADDR_CORRECT is used.  */

#define ADDR_CORRECT(x) (x)

/* Use terminfo instead of termcap.  */

#define TERMINFO

/* Some variants have TIOCGETC, but the structures to go with it
   are not declared.  */

#define BROKEN_TIOCGETC

/* AT&T SVr3 X wants to be linked with shared libraries */

#define LIB_X11_LIB -lX11_s

/* X needs to talk on the network, so search the network library.  */

#define LIBX10_SYSTEM -lnsl_s
#define LIBX11_SYSTEM -lpt -lnls -lnsl_s -lc_s

/* The docs for system V/386 suggest v.3 has sigpause,
   so let's give it a try.  */
#define HAVE_SYSV_SIGPAUSE

/* Some variants have TIOCGWINSZ, but the structures to go with it
   are not declared.  */

#define BROKEN_TIOCGWINSZ

/* If we're using the System V X port, BSD bstring functions will be handy */

#ifdef HAVE_X_WINDOWS
#define BSTRING
#endif /* HAVE_X_WINDOWS */

/* Enable support for shared libraries in unexec.  */

#define USG_SHARED_LIBRARIES

/* On USG systems signal handlers return void */

#define SIGTYPE void

/* arch-tag: 2bca65fd-f015-44b9-a2aa-9f8170ce89ca
   (do not change this comment) */