annotate lisp/electric.el @ 12279:de2a82180af0

Adapt to the changes in vc-hooks.el, namely, the new 'none-value of vc-locking-user, and the consistent caching of all properties. Especially, make the properties survive check-ins and check-outs. Various minor bug fixes. (vc-file-clear-masterprops): New function. (vc-backend-checkin, vc-backend-revert): Set vc-locking-user to 'none if the file is unlocked. (vc-backend-checkin, vc-backend-revert, vc-backend-checkout): Use vc-file-clear-masterprops, and adjust those properties that are not cleared. (vc-resynch-window): Temporarily remove vc-find-file-hook, so that we don't lose the file properties during check-in/out. (vc-resynch-window): Do not try to delete the current window if `vc-keep-workfiles' is nil (doesn't make sense; killing the buffer is enough.) (vc-backend-checkin): Rewrote the code that adjusts the default branch and removes any locks that might remain after check-in. (vc-cancel-version): Abort with error message in the CVS case. (The error used to be signalled in vc-backend-uncheck, which is a little too late.) (vc-minor-revision): Function removed.

;;; electric.el --- window maker and Command loop for `electric' modes.

;; Copyright (C) 1985, 1986 Free Software Foundation, Inc.

;; Author: K. Shane Hartman
;; Maintainer: FSF
;; Keywords: extensions

;; This file is part of GNU Emacs.

;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING.  If not, write to
;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.

;;; Commentary:

; zaaaaaaap

;;; Code:

;; This loop is the guts for non-standard modes which retain control
;; until some event occurs.  It is a `do-forever', the only way out is to
;; throw.  It assumes that you have set up the keymap, window, and
;; everything else: all it does is read commands and execute them -
;; providing error messages should one occur (if there is no loop
;; function - which see).  The required argument is a tag which should
;; expect a value of nil if the user decides to punt. The
;; second argument is a prompt string (defaults to "->").  Given third
;; argument non-nil, it INHIBITS quitting unless the user types C-g at
;; toplevel.  This is so user can do things like C-u C-g and not get
;; thrown out.  Fourth argument, if non-nil, should be a function of two
;; arguments which is called after every command is executed.  The fifth
;; argument, if provided, is the state variable for the function.  If the
;; loop-function gets an error, the loop will abort WITHOUT throwing
;; (moral: use unwind-protect around call to this function for any
;; critical stuff).  The second argument for the loop function is the
;; conditions for any error that occurred or nil if none.

(defun Electric-command-loop (return-tag
			      &optional prompt inhibit-quit
					loop-function loop-state)
  (if (not prompt) (setq prompt "->"))
  (let (cmd (err nil))
    (while t
      (setq cmd (read-key-sequence (if (stringp prompt)
				       prompt (funcall prompt))))
      (setq last-command-char (aref cmd (1- (length cmd)))
	    this-command (key-binding cmd)
	    cmd this-command)
      (if (or (prog1 quit-flag (setq quit-flag nil))
	      (eq last-input-char ?\C-g))
	  (progn (setq unread-command-events nil
		       prefix-arg nil)
		 ;; If it wasn't cancelling a prefix character, then quit.
		 (if (or (= (length (this-command-keys)) 1)
			 (not inhibit-quit)) ; safety
		     (progn (ding)
			    (message "Quit")
			    (throw return-tag nil))
		   (setq cmd nil))))
      (setq current-prefix-arg prefix-arg)
      (if cmd
	  (condition-case conditions
	      (progn (command-execute cmd)
		     (setq last-command this-command)
		     (if (or (prog1 quit-flag (setq quit-flag nil))
			     (eq last-input-char ?\C-g))
			 (progn (setq unread-command-events nil)
				(if (not inhibit-quit)
				    (progn (ding)
					   (message "Quit")
					   (throw return-tag nil))
				  (ding)))))
	    (buffer-read-only (if loop-function
				  (setq err conditions)
				(ding)
				(message "Buffer is read-only")
				(sit-for 2)))
	    (beginning-of-buffer (if loop-function
				     (setq err conditions)
				   (ding)
				   (message "Beginning of Buffer")
				   (sit-for 2)))
	    (end-of-buffer (if loop-function
			       (setq err conditions)
			     (ding)
			     (message "End of Buffer")
			     (sit-for 2)))
	    (error (if loop-function
		       (setq err conditions)
		     (ding)
		     (message "Error: %s"
			      (if (eq (car conditions) 'error)
				  (car (cdr conditions))
				(prin1-to-string conditions)))
		     (sit-for 2))))
	(ding))
      (if loop-function (funcall loop-function loop-state err))))
  (ding)
  (throw return-tag nil))

;; This function is like pop-to-buffer, sort of. 
;; The algorithm is
;; If there is a window displaying buffer
;; 	Select it
;; Else if there is only one window
;; 	Split it, selecting the window on the bottom with height being
;; 	the lesser of max-height (if non-nil) and the number of lines in
;;      the buffer to be displayed subject to window-min-height constraint.
;; Else
;; 	Switch to buffer in the current window.
;;
;; Then if max-height is nil, and not all of the lines in the buffer
;; are displayed, grab the whole frame.
;;
;; Returns selected window on buffer positioned at point-min.

(defun Electric-pop-up-window (buffer &optional max-height)
  (let* ((win (or (get-buffer-window buffer) (selected-window)))
	 (buf (get-buffer buffer))
	 (one-window (one-window-p t))
	 (pop-up-windows t)
	 (target-height)
	 (lines))
    (if (not buf)
	(error "Buffer %s does not exist" buffer)
      (save-excursion
	(set-buffer buf)
	(setq lines (count-lines (point-min) (point-max)))
	(setq target-height
	      (min (max (if max-height (min max-height (1+ lines)) (1+ lines))
			window-min-height)
		   (save-window-excursion
		     (delete-other-windows)
		     (1- (window-height (selected-window)))))))
      (cond ((and (eq (window-buffer win) buf))
	     (select-window win))
	    (one-window
	     (goto-char (window-start win))
	     (pop-to-buffer buffer)
	     (setq win (selected-window))
	     (enlarge-window (- target-height (window-height win))))
	    (t
	     (switch-to-buffer buf)))
      (if (and (not max-height)
	       (> target-height (window-height (selected-window))))
	  (progn (goto-char (window-start win))
		 (enlarge-window (- target-height (window-height win)))))
      (goto-char (point-min))
      win)))

(provide 'electric)

;;; electric.el ends here