annotate etc/TUTORIAL @ 11255:e79aca68f09c

Comment changes.

Copyright (c) 1985 Free Software Foundation, Inc;  See end for conditions.

You are looking at the Emacs tutorial.

Emacs commands generally involve the CONTROL key (sometimes labelled
CTRL or CTL) or the META key (sometimes labelled EDIT).  Rather than
write out META or CONTROL each time we want you to prefix a character,
we'll use the following abbreviations:

 C-<chr>  means hold the CONTROL key while typing the character <chr>
	  Thus, C-f would be: hold the CONTROL key and type f.
 M-<chr>  means hold the META or EDIT key down while typing <chr>.
	  If there is no META or EDIT key, type <ESC>, release it,
	  then type the character <chr>.  "<ESC>" stands for the
	  key labelled "ALT" or "ESC".

Important note: to end the Emacs session, type C-x C-c.  (Two characters.)
The characters ">>" at the left margin indicate directions for you to
try using a command.  For instance:
<<Blank lines inserted here by startup of help-with-tutorial>>
>>  Now type C-v (View next screen) to move to the next screen.
	(go ahead, do it by depressing the control key and v together).
	From now on, you'll be expected to do this whenever you finish
	reading the screen.

Note that there is an overlap when going from screen to screen; this
provides some continuity when moving through the file.

The first thing that you need to know is how to move around from
place to place in the file.  You already know how to move forward a
screen, with C-v.  To move backwards a screen, type M-v (depress the
META key and type v, or type <ESC>v if you don't have a META or EDIT
key).

>>  Try typing M-v and then C-v to move back and forth a few times.


* SUMMARY
---------

The following commands are useful for viewing screenfuls:

	C-v	Move forward one screenful
	M-v	Move backward one screenful
	C-l	Clear screen and redisplay everything
		 putting the text near the cursor at the center.
		 (That's control-L, not control-1.)

>> Find the cursor and remember what text is near it.
   Then type a C-l.
   Find the cursor again and see what text is near it now.


* BASIC CURSOR CONTROL
----------------------

Getting from screenful to screenful is useful, but how do you
reposition yourself within a given screen to a specific place?
There are several ways you can do this.  One way (not the best, but
the most basic) is to use the commands previous, backward, forward
and next.  As you can imagine these commands (which are given to
Emacs as C-p, C-b, C-f, and C-n  respectively) move the cursor from
where it currently is to a new place in the given direction.  Here,
in a more graphical form are the commands:
 
			  Previous line, C-p
				  :
				  :
   Backward, C-b .... Current cursor position .... Forward, C-f
				  :
				  :
			  Next line, C-n

>> Move the cursor to the line in the middle of that diagram
   and type C-l to see the whole diagram centered in the screen.

You'll probably find it easy to think of these by letter.  P for
previous, N for next, B for backward and F for forward.  These are
the basic cursor positioning commands and you'll be using them ALL
the time so it would be of great benefit if you learn them now.

>> Do a few C-n's to bring the cursor down to this line.

>> Move into the line with C-f's and then up with C-p's.
   See what C-p does when the cursor is in the middle of the line.

Lines are separated by Newline characters.  For most applications
there should normally be a Newline character at the end of the text,
as well, but it is up to you to make sure of this.  A file can
validly exist without a Newline at the end.

>> Try to C-b at the beginning of a line.  Do a few more C-b's.
   Then do C-f's back to the end of the line and beyond.

When you go off the top or bottom of the screen, the text beyond
the edge is shifted onto the screen so that your instructions can
be carried out while keeping the cursor on the screen.

>> Try to move the cursor off the bottom of the screen with C-n and
   see what happens.

If moving by characters is too slow, you can move by words.  M-f
(Meta-f) moves forward a word and M-b moves back a word.

>> Type a few M-f's and M-b's.  Intersperse them with C-f's and C-b's.

Notice the parallel between C-f and C-b on the one hand, and M-f and
M-b on the other hand.  Very often Meta characters are used for
operations related to English text whereas Control characters operate
on the basic textual units that are independent of what you are
editing (characters, lines, etc).  There is a similar parallel between
lines and sentences: C-a and C-e move to the beginning or end of a
line, and M-a and M-e move to the beginning or end of a sentence.

>> Try a couple of C-a's, and then a couple of C-e's.
   Try a couple of M-a's, and then a couple of M-e's.

See how repeated C-a's do nothing, but repeated M-a's keep moving
farther.  Do you think that this is right?

Two other simple cursor motion commands are M-< (Meta Less-than),
which moves to the beginning of the file, and M-> (Meta Greater-than),
which moves to the end of the file.  You probably don't need to try
them, since finding this spot again will be boring.  On most terminals
the "<" is above the comma and you must use the shift key to type it.
On these terminals you must use the shift key to type M-< also;
without the shift key, you would be typing M-comma.

The location of the cursor in the text is also called "point".  To
paraphrase, the cursor shows on the screen where point is located in
the text.

Here is a summary of simple moving operations including the word and
sentence moving commands:

	C-f	Move forward a character
	C-b	Move backward a character

	M-f	Move forward a word
	M-b	Move backward a word

	C-n	Move to next line
	C-p	Move to previous line

	C-a	Move to beginning of line
	C-e	Move to end of line

	M-a	Move back to beginning of sentence
	M-e	Move forward to end of sentence

	M-<	Go to beginning of file
	M->	Go to end of file

>> Try all of these commands now a few times for practice.
   Since the last two will take you away from this screen,
   you can come back here with M-v's and C-v's.  These are
   the most often used commands.

Like all other commands in Emacs, these commands can be given
arguments which cause them to be executed repeatedly.  The way you
give a command a repeat count is by typing C-u and then the digits
before you type the command.  If you have a META or EDIT key, you can
omit the C-u if you hold down the META or EDIT key while you type the
digits.  This is easier, but we recommend the C-u method because it
works on any terminal.

For instance, C-u 8 C-f moves forward eight characters.
	
>> Try giving a suitable argument to C-n or C-p to come as close
   as you can to this line in one jump.

The only apparent exception to this is the screen moving commands,
C-v and M-v.  When given an argument, they scroll the screen up or
down by that many lines, rather than screenfuls.  This proves to be
much more useful.

>> Try typing C-u 8 C-v now.

Did it scroll the screen up by 8 lines?  If you would like to
scroll it down you can give an argument to M-v.

If you are using X Windows, there is probably a rectangular area
called a scroll bar at the right hand side of the Emacs window.  You
can scroll the text by clicking the mouse in the scroll bar.

>> Try pressing the middle button at the top of the highlighted area
within the scroll bar, then moving the mouse while holding that button
down.

>> Move the mouse to a point in the scroll bar about three lines from
the top, and click the left button a couple of times.  Then try the
right button a couple of times.


* WHEN EMACS IS HUNG
--------------------

If Emacs gets into an infinite (or simply very long) computation which
you don't want to finish, you can stop it safely by typing C-g.
You can also use C-g to discard a numeric argument or the beginning of
a command that you don't want to finish.

>> Type C-u 100 to make a numeric arg of 100, then type C-g.
   Now type C-f.  How many characters does it move?
   If you have typed an <ESC> by mistake, you can get rid of it
   with a C-g.

If you type <ESC> <ESC>, you get a new window appearing on
the screen, telling you that M-ESC is a "disabled command"
and asking whether you really want to execute it.  The command
M-ESC is marked as disabled because you probably don't want to
use it until you know more about Emacs, and we expect it would
confuse you if it were allowed to go ahead and run.  If you really
want to try the M-ESC command, you could type a Space in answer
to the question and M-ESC would go ahead.  Normally, if you do
not want to execute M-ESC, you would type "n" to answer the question.

>> Type <ESC> <ESC>, then type n.


* WINDOWS
---------

Emacs can have several windows, each displaying its own text.
At this stage it is better not to go into the techniques of
using multiple windows.  But you do need to know how to get
rid of extra windows that may appear to display help or
output from certain commands.  It is simple:

	C-x 1	One window (i.e., kill all other windows).

That is Control-x followed by the digit 1.
C-x 1 makes the window which the cursor is in become
the full screen, by getting rid of any other windows.

>> Move the cursor to this line and type C-u 0 C-l.
>> Type Control-h k Control-f.
   See how this window shrinks, while a new one appears
   to display documentation on the Control-f command.

>> Type C-x 1 and see the documentation listing window disappear.


* INSERTING AND DELETING
------------------------

If you want to insert text, just type it.  Characters which you can
see, such as A, 7, *, etc. are taken by Emacs as text and inserted
immediately.  Type <Return> (the carriage-return key) to insert a
Newline character.

You can delete the last character you typed by typing <Rubout>.
<Rubout> is a key on the keyboard, which might be labelled "Delete"
instead of "Rubout" on some terminals.  More generally, <Rubout>
deletes the character immediately before the current cursor position.

>> Do this now, type a few characters and then delete them
   by typing <Rubout> a few times.  Don't worry about this file
   being changed; you won't affect the master tutorial.  This is just
   a copy of it.

>> Now start typing text until you reach the right margin, and keep
   typing.  When a line of text gets too big for one line on the
   screen, the line of text is "continued" onto a second screen line.
   The backslash at the right margin indicates a line which has
   been continued.
>> Use <Rubout>s to delete the text until the line fits on one screen
   line again.  The continuation line goes away.

>> Move the cursor to the beginning of a line and type <Rubout>.  This
   deletes the newline before the line and merges the line onto
   the previous line.  The resulting line may be too long to fit, in
   which case it has a continuation line.
>> Type <Return> to reinsert the Newline you deleted.

Remember that most Emacs commands can be given a repeat count;
this includes characters which insert themselves.

>>  Try that now -- type C-u 8 * and see what happens.

You've now learned the most basic way of typing something in
Emacs and correcting errors.  You can delete by words or lines
as well.  Here is a summary of the delete operations:

	<Rubout>     delete the character just before the cursor
	C-d   	     delete the next character after the cursor

	M-<Rubout>   kill the word immediately before the cursor
	M-d	     kill the next word after the cursor

	C-k	     kill from the cursor position to end of line
	M-k	     kill to the end of the current sentence

Notice that <Rubout> and C-d vs M-<Rubout> and M-d extend the parallel
started by C-f and M-f (well, <Rubout> isn't really a control
character, but let's not worry about that).  C-k and M-k are like C-e
and M-e, sort of, in that lines are opposite sentences.

Now suppose you kill something, and then you decide that you want to
get it back?  Well, whenever you kill something bigger than a
character, Emacs saves it for you.  To yank it back, use C-y.  You
can kill text in one place, move elsewhere, and then do C-y; this is
a good way to move text around.  Note that the difference
between "Killing" and "Deleting" something is that "Killed" things
can be yanked back, and "Deleted" things cannot.  Generally, the
commands that can destroy a lot of text save it, while the ones that
attack only one character, or nothing but blank lines and spaces, do
not save.

For instance, type C-n a couple times to position the cursor
at some line on this screen.

>> Do this now, move the cursor and kill that line with C-k.

Note that a single C-k kills the contents of the line, and a second
C-k kills the line itself, and make all the other lines move up.  If
you give C-k a repeat count, it kills that many lines AND their
contents.

The text that has just disappeared is saved so that you can
retrieve it.  To retrieve the last killed text and put it where
the cursor currently is, type C-y.

>> Try it; type C-y to yank the text back.

Think of C-y as if you were yanking something back that someone
took away from you.  Notice that if you do several C-k's in a row
the text that is killed is all saved together so that one C-y will
yank all of the lines.

>> Do this now, type C-k several times.

Now to retrieve that killed text:

>> Type C-y.  Then move the cursor down a few lines and type C-y
   again.  You now see how to copy some text.

What do you do if you have some text you want to yank back, and then
you kill something else?  C-y would yank the more recent kill.  But
the previous text is not lost.  You can get back to it using the M-y
command.  After you have done C-y to get the most recent kill, typing
M-Y replaces that yanked text with the previous kill.  Typing M-y
again and again brings in earlier and earlier kills.  When you
have reached the text you are looking for, you can just go away and
leave it there.  If you M-y enough times, you come back to the
starting point (the most recent kill).

>> Kill a line, move around, kill another line.
   Then do C-y to get back the second killed line.
   Then do M-y and it will be replaced by the first killed line.
   Do more M-y's and see what you get.  Keep doing them until
   the second kill line comes back, and then a few more.
   If you like, you can try giving M-y positive and negative
   arguments.


* UNDO
------

Any time you make a change to the text and wish you had not done so,
you can undo the change (return the text to its previous state)
with the undo command, C-x u.  Normally, C-x u undoes one command's
worth of changes; if you repeat the C-x u several times in a row,
each time undoes one more command.  There are two exceptions:
commands that made no change (just moved the cursor) do not count,
and self-inserting characters are often lumped together in groups
of up to 20.  This is to reduce the number of C-x u's you have to type.

>> Kill this line with C-k, then type C-x u and it should reappear.

C-_ is another command for undoing; it is just the same as C-x u
but easier to type several times in a row.  The problem with C-_ is
that on some keyboards it is not obvious how to type it.  That is
why C-x u is provided as well.  On some DEC terminals, you can type
C-_ by typing / while holding down CTRL.  Illogical, but what can
you expect from DEC?

Giving a numeric argument to C-_ or C-x u is equivalent to repeating
it as many times as the argument says.


* FILES
-------

In order to make the text you edit permanent, you must put it in a
file.  Otherwise, it will go away when your invocation of Emacs goes
away.  You put your editing in a file by "finding" the file.  What
finding means is that you see the contents of the file in your Emacs;
and, loosely speaking, what you are editing is the file itself.
However, the changes still don't become permanent until you "save" the
file.  This is so you can have control to avoid leaving a half-changed
file around when you don't want to.  Even then, Emacs leaves the
original file under a changed name in case your changes turn out
to be a mistake.

If you look near the bottom of the screen you will see a line that
begins and ends with dashes, and contains the string "Emacs: TUTORIAL".
Your copy of the Emacs tutorial is called "TUTORIAL".  Whatever
file you find, that file's name will appear in that precise
spot.

The commands for finding and saving files are unlike the other
commands you have learned in that they consist of two characters.
They both start with the character Control-x.  There is a whole series
of commands that start with Control-x; many of them have to do with
files, buffers, and related things, and all of them consist of
Control-x followed by some other character.

Another thing about the command for finding a file is that you have
to say what file name you want.  We say the command "reads an argument
from the terminal" (in this case, the argument is the name of the
file).  After you type the command

	C-x C-f   Find a file

Emacs asks you to type the file name.  It echoes on the bottom
line of the screen.  You are using the minibuffer now!  this is
what the minibuffer is for.  When you type <Return> to end the
file name, the minibuffer is no longer needed, so it disappears.

>> Type C-x C-f, then type C-g.  This cancels the minibuffer,
   and also cancels the C-x C-f command that was using the
   minibuffer.  So you do not find any file.

In a little while the file contents appear on the screen.  You can
edit the contents.  When you wish to make the changes permanent,
issue the command

	C-x C-s   Save the file

The contents of Emacs are written into the file.  The first time you
do this, the original file is renamed to a new name so that it
is not lost.  The new name is made by appending "~" to the end
of the original file's name.

When saving is finished, Emacs prints the name of the file written.
You should save fairly often, so that you will not lose very much
work if the system should crash.

>> Type C-x C-s, saving your copy of the tutorial.
   This should print "Wrote .../TUTORIAL" at the bottom of the screen.
   On VMS it will print "Wrote ...[...]TUTORIAL."

NOTE: On some systems, typing C-x C-s will freeze the screen and you
will see no further output from Emacs.  This indicates that an
operating system "feature" called "flow control" is intercepting the
C-s and not letting it get through to Emacs.  To unfreeze the screen,
type C-q.  Then see the section "Spontaneous Entry to Incremental
Search" in the Emacs manual for advice on dealing with this "feature".

To make a new file, just find it "as if" it already existed.  Then
start typing in the text.  When you ask to "save" the file, Emacs
will really create the file with the text that you have inserted.
From then on, you can consider yourself to be editing an already
existing file.


* BUFFERS
---------

If you find a second file with C-x C-f, the first file remains
inside Emacs.  You can switch back to it by finding it again with
C-x C-f.  This way you can get quite a number of files inside Emacs.

The object inside Emacs which holds the text read from one file
is called a "buffer."  Finding a file makes a new buffer inside Emacs.
To see a list of the buffers that exist in Emacs, type

	C-x C-b   List buffers

>> Try C-x C-b now.

See how each buffer has a name, and it may also have a file name
for the file whose contents it holds.  Some buffers do not correspond
to files.  For example, the buffer named "*Buffer List*" does
not have any file.  It is the buffer which contains the buffer
list that was made by C-x C-b.  ANY text you see in an Emacs window
has to be in some buffer.

>> Type C-x 1 to get rid of the buffer list.

If you make changes to the text of one file, then find another file,
this does not save the first file.  Its changes remain inside Emacs,
in that file's buffer.  The creation or editing of the second file's
buffer has no effect on the first file's buffer.  This is very useful,
but it also means that you need a convenient way to save the first
file's buffer.  It would be a nuisance to have to switch back to
it with C-x C-f in order to save it with C-x C-s.  So we have

	C-x s     Save some buffers

C-x s goes through the list of all the buffers you have
and finds the ones that contain files you have changed.
For each such buffer, C-x s asks you whether to save it.


* EXTENDING THE COMMAND SET
---------------------------

There are many, many more Emacs commands than could possibly be put
on all the control and meta characters.  Emacs gets around this with
the X (eXtend) command.  This comes in two flavors:

	C-x	Character eXtend.  Followed by one character.
	M-x	Named command eXtend.  Followed by a long name.

These are commands that are generally useful but used less than the
commands you have already learned about.  You have already seen two
of them: the file commands C-x C-f to Find and C-x C-s to Save.
Another example is the command to tell Emacs that you'd like to stop
editing and get rid of Emacs.  The command to do this is C-x C-c.
(Don't worry; it offers to save each changed file before it kills the
Emacs.)

C-z is the command to exit Emacs *temporarily*--so that you can go
back to the same Emacs session afterward.

On systems which allow it, C-z exits from Emacs to the shell but does
not destroy the Emacs; if you use the C shell, you can resume Emacs
with the `fg' command (or, more generally, with `%emacs', which works
even if your most recent job was some other).  On systems which don't
implement suspending, C-z creates a subshell running under Emacs to
give you the chance to run other programs and return to Emacs
afterward; it does not truly "exit" from Emacs.  In this case, the
shell command `exit' is the usual way to get back to Emacs from the
subshell.

The time to use C-x C-c is when you are about to log out.  It's also
the right thing to use to exit an Emacs invoked under mail handling
programs and other random utilities, since they may not know how to
cope with suspension of Emacs.  On other occasions, use C-z, and
resume the Emacs when you have more editing to do.

There are many C-x commands.  The ones you know are:

	C-x C-f		Find file.
	C-x C-s		Save file.
	C-x C-b		List buffers.
	C-x C-c		Quit Emacs.
	C-x u		Undo.

Named eXtended commands are commands which are used even less
frequently, or commands which are used only in certain modes.  These
commands are usually called "functions".  An example is the function
replace-string, which globally replaces one string with another.  When
you type M-x, Emacs prompts you at the bottom of the screen with
M-x and you should type the name of the function you wish to call; in
this case, "replace-string".  Just type "repl s<TAB>" and Emacs will
complete the name.  End the command name with <Return>.
Then type the two "arguments"--the string to be replaced, and the string
to replace it with--each one ended with a Return.

>> Move the cursor to the blank line two lines below this one.
   Then type M-x repl s<Return>changed<Return>altered<Return>.

   Notice how this line has changed: you've replaced
   the word c-h-a-n-g-e-d with "altered" wherever it occurred
   after the cursor.


* AUTO SAVE
-----------

When you have made changes in a file, but you have not saved them yet,
they could be lost if your computer crashes.  To protect you from
this, Emacs writes "auto save" files periodically.  The auto save file
name has a # at the beginning and the end; for example, if your file
is named "hello.c", its auto save file's name is "#hello.c#".  When
you save the file in the normal way, its auto save file is no longer
necessary so Emacs deletes it.

If the computer crashes, you can recover your auto-saved editing by
finding the file normally (the file you were editing, not the auto
save file) and then typing M-x recover file<return>.  When it asks for
confirmation, type yes<return> to go ahead and recover the auto-save
data.


* MODE LINE
-----------

If Emacs sees that you are typing commands slowly it shows them to you
at the bottom of the screen in an area called the "echo area."  The echo
area contains the bottom line of the screen.  The line immediately above
it is called the MODE LINE.  The mode line says something like

--**-Emacs: TUTORIAL          (Fundamental)--58%----------------------

This is a very useful "information" line.

You already know what the filename means--it is the file you have
found.  What the --NN%-- means is that NN percent of the file is
above the top of the screen.  If the top of the file is on the screen,
it will say --Top-- instead of --00%--.  If the bottom of the file is
on the screen, it will say --Bot--.  If you are looking at a file so
small it all fits on the screen, it says --All--.

The stars near the front mean that you have made changes to the text.
Right after you visit or save a file, there are no stars, just dashes.

The part of the mode line inside the parentheses is to tell you what
modes you are in.  The default mode is Fundamental which is what you
are in now.  It is an example of a "major mode".  There are several
major modes in Emacs for editing different languages and text, such as
Lisp mode, Text mode, etc.  At any time one and only one major mode is
active, and its name can always be found in the mode line just where
"Fundamental" is now.  Each major mode makes a few commands behave
differently.  For example, there are commands for creating comments in
a program, and since each programming language has a different idea of
what a comment should look like, each major mode has to insert
comments differently.  Each major mode is the name of an extended
command, which is how you get into the mode.  For example,
M-x fundamental-mode is how to get into Fundamental mode.

If you are going to be editing English text, such as this file, you
should probably use Text Mode.
>> Type M-x text-mode<Return>.

Don't worry, none of the commands you have learned changes Emacs in
any great way.  But you can observe that apostrophes are now part of
words when you do M-f or M-b.  Major modes are usually like that:
commands don't change into completely unrelated things, but they work
a little bit differently.

To get documentation on your current major mode, type C-h m.

>> Use C-u C-v once or more to bring this line near the top of screen.
>> Type C-h m, to see how Text mode differs from Fundamental mode.
>> Type C-x 1 to remove the documentation from the screen.

Major modes are called major because there are also minor modes.
They are called minor because they aren't alternatives to the major
modes, just minor modifications of them.  Each minor mode can be
turned on or off by itself, regardless of what major mode you are in,
and regardless of the other minor modes.  So you can use no minor
modes, or one minor mode, or any combination of several minor modes.

One minor mode which is very useful, especially for editing English
text, is Auto Fill mode.  When this mode is on, Emacs breaks the line
in between words automatically whenever the line gets too long.  You
can turn this mode on by doing M-x auto-fill-mode<Return>.  When the
mode is on, you can turn it off by doing M-x auto-fill-mode<Return>.
If the mode is off, this function turns it on, and if the mode is on,
this function turns it off.  This is called "toggling".

>> Type M-x auto-fill-mode<Return> now.  Then insert a line of "asdf "
   over again until you see it divide into two lines.  You must put in
   spaces between them because Auto Fill breaks lines only at spaces.

The margin is usually set at 70 characters, but you can change it
with the C-x f command.  You should give the margin setting you want
as a numeric argument.

>> Type C-x f with an argument of 20.  (C-u 2 0 C-x f).
   Then type in some text and see Emacs fill lines of 20
   characters with it.  Then set the margin back to 70 using
   C-x f again.

If you makes changes in the middle of a paragraph, Auto Fill mode
does not re-fill it for you.
To re-fill the paragraph, type M-q (Meta-q) with the cursor inside
that paragraph.

>> Move the cursor into the previous paragraph and type M-q.

* SEARCHING
-----------

Emacs can do searches for strings (these are groups of contiguous
characters or words) either forward through the file or backward
through it.  To search for the string means that you are trying to
locate it somewhere in the file and have Emacs show you where the
occurrences of the string exist.  This type of search is somewhat
different from what you may be familiar with.  It is a search that is
performed as you type in the thing to search for.  The command to
initiate a search is C-s for forward search, and C-r for reverse
search.  BUT WAIT!  Don't do them now.  When you type C-s you'll
notice that the string "I-search" appears as a prompt in the echo
area.  This tells you that Emacs is in what is called an incremental
search waiting for you to type the thing that you want to search for.
<RET> terminates a search.

>> Now type C-s to start a search.  SLOWLY, one letter at a time,
   type the word 'cursor', pausing after you type each
   character to notice what happens to the cursor.
>> Type C-s to find the next occurrence of "cursor".
>> Now type <Rubout> four times and see how the cursor moves.
>> Type <RET> to terminate the search.

Did you see what happened?  Emacs, in an incremental search, tries to
go to the occurrence of the string that you've typed out so far.  To go
to the next occurrence of 'cursor' just type C-s again.  If no such
occurrence exists Emacs beeps and tells you that it is a failing
search.  C-g would also terminate the search.

NOTE: On some systems, typing C-s will freeze the screen and you will
see no further output from Emacs.  This indicates that an operating
system "feature" called "flow control" is intercepting the C-s and not
letting it get through to Emacs.  To unfreeze the screen, type C-q.
Then see the section "Spontaneous Entry to Incremental Search" in the
Emacs manual for advice on dealing with this "feature".

If you are in the middle of an incremental search and type <Rubout>,
you'll notice that the last character in the search string is erased
and the search backs up to the last place of the search.  For
instance, suppose you currently have typed 'cu' and you see that your
cursor is at the first occurrence of 'cu'.  If you now type <Rubout>,
the 'u' on the search line is erased and you'll be repositioned in the
text to the occurrence of 'c' where the search took you before you
typed the 'u'.  This provides a useful means for backing up while you
are searching.

If you are in the middle of a search and type a control or meta
character (with a few exceptions--characters that are special in
a search, such as C-s and C-r), the search is terminated.

The C-s starts a search that looks for any occurrence of the search
string AFTER the current cursor position.  But what if you want to
search for something earlier in the text?  To do this, type C-r for
Reverse search.  Everything that applies to C-s applies to C-r except
that the direction of the search is reversed.


* MULTIPLE WINDOWS
------------------

One of the nice features of Emacs is that you can display more than one
window on the screen at the same time.

>> Move the cursor to this line and type C-u 0 C-l.

>> Now type C-x 2 which splits the screen into two windows.
   Both windows display this tutorial.  The cursor stays in the top window.

>> Type C-M-v to scroll the bottom window.
   (If you don't have a real Meta key, type ESC C-v.)

>> Type C-x o ("o" for "other") to move the cursor to the bottom window.
>> Use C-v and M-v in the bottom window to scroll it.
   Keep reading these directions in the top window.

>> Type C-x o again to move the cursor back to the top window.
   The cursor is still just where it was in the top window before.

You can keep using C-x o to switch between the windows.  Each
window has its own cursor position, but only one window actually
shows the cursor.  All the ordinary editing commands apply to the
window that the cursor is in.

The command C-M-v is very useful when you are editing text in one
window and using the other window just for reference.  You can keep
the cursor always in the window where you are editing, and edit
there as you advance through the other window.

>> Type C-x 1 (in the top window) to get rid of the bottom window.

(If you had typed C-x 1 in the bottom window, that would get rid
of the top one.  Think of this command as "Keep just one
window--the window I am already in.")

You don't have to display the same buffer in both windows.  If
you use C-x C-f to find a file in one window, the other window
doesn't change.  You can pick a file in each window
independently.

Here is another way to use two windows to display two different
things:

>> Type C-x 4 C-f followed by the name of one of your files.
   End with <RETURN>.  See the specified file appear in the bottom
   window.  The cursor goes there, too.

>> Type C-x o to go back to the top window, and C-x 1 to delete
   the bottom window.


* RECURSIVE EDITING LEVELS
--------------------------

Sometimes you will get into what is called a "recursive editing
level".  This is indicated by square brackets in the mode line,
surrounding the parentheses around the major mode name.  For
example, you might see [(Fundamental)] instead of (Fundamental).

To get out of the recursive editing level, type
  M-x top-level<Return>.

>> Try that now; it should display "Back to top level"
   at the bottom of the screen.

In fact, you were ALREADY at top level (not inside a recursive editing
level) if you have obeyed instructions.  M-x top-level does not care;
it gets out of any number of recursive editing levels, perhaps zero,
to get back to top level.

You can't use C-g to get out of a recursive editing level because C-g
is used for discarding numeric arguments and partially typed commands
WITHIN the recursive editing level.


* GETTING MORE HELP
-------------------

In this tutorial we have tried to supply just enough information to
get you started using Emacs.  There is so much available in Emacs that
it would be impossible to explain it all here.  However, you may want
to learn more about Emacs since it has numerous desirable features
that you don't know about yet.  Emacs has a great deal of internal
documentation.  All of these commands can be accessed through
the character Control-h, which we call "the Help character"
because of the function it serves.

To use the HELP features, type the C-h character, and then a
character saying what kind of help you want.  If you are REALLY lost,
type C-h ? and Emacs will tell you what kinds of help it can give.
If you have typed C-h and decide you don't want any help, just
type C-g to cancel it.

(Some sites rebind the character C-h.  They really shouldn't do this
as a blanket measure, so complain to the operator.  Meanwhile, if C-h
does not display a message about help at the bottom of the screen, try
typing M-x help RET instead.)

The most basic HELP feature is C-h c.  Type C-h, a c, and a
command character or sequence, and Emacs displays a very brief
description of the command.

>> Type C-h c Control-p.
  The message should be something like

	C-p runs the command previous-line

This tells you the "name of the function".  That is important in
writing Lisp code to extend Emacs; it also is enough to remind
you of what the command does if you have seen it before but did
not remember.

Multi-character commands such as C-x C-s and (if you have no META or
EDIT key) <ESC>v are also allowed after C-h c.

To get more information on the command, use C-h k instead of C-h c.

>> Type C-h k Control-p.

This displays the documentation of the function, as well as its
name, in an Emacs window.  When you are finished reading the
output, type C-x 1 to get rid of the help text.  You do not have
to do this right away.  You can do some editing while referring
to the help text and then type C-x 1.

Here are some other useful C-h options:

   C-h f	Describe a function.  You type in the name of the
		function.

>> Try typing C-h f previous-line<Return>.
   This prints all the information Emacs has about the
   function which implements the C-p command.

   C-h a	Command Apropos.  Type in a keyword and Emacs will list
		all the commands whose names contain that keyword.
		These commands can all be invoked with Meta-x.
		For some commands, Command Apropos will also list a one
		or two character sequence which has the same effect.

>> Type C-h a file<Return>.

This displays in another window a list of all M-x commands with
"file" in their names.  You will also see commands like C-x C-f
and C-x C-w, listed beside the command names find-file and
write-file.

>> Type C-M-v to scroll the help window.  Do this a few times.

>> Type C-x 1 to delete the help window.


* CONCLUSION
------------

Remember, to exit Emacs permanently use C-x C-c.  To exit to a shell
temporarily, so that you can come back in, use C-z.

This tutorial is meant to be understandable to all new users, so if
you found something unclear, don't sit and blame yourself - complain!


COPYING
-------

This tutorial descends from a long line of Emacs tutorials
starting with the one written by Stuart Cracraft for the original Emacs.

This version of the tutorial, like GNU Emacs, is copyrighted, and
comes with permission to distribute copies on certain conditions:

Copyright (c) 1985 Free Software Foundation

   Permission is granted to anyone to make or distribute verbatim copies
   of this document as received, in any medium, provided that the
   copyright notice and permission notice are preserved,
   and that the distributor grants the recipient permission
   for further redistribution as permitted by this notice.

   Permission is granted to distribute modified versions
   of this document, or of portions of it,
   under the above conditions, provided also that they
   carry prominent notices stating who last altered them.

The conditions for copying Emacs itself are slightly different
but in the same spirit.  Please read the file COPYING and then
do give copies of GNU Emacs to your friends.
Help stamp out software obstructionism ("ownership") by using,
writing, and sharing free software!