annotate lisp/Makefile.in @ 84671:f061115a812f

*** empty log message ***

# Maintenance productions for the Lisp directory
# Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005,
#   2006, 2007 Free Software Foundation, Inc.

# This file is part of GNU Emacs.

# GNU Emacs is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3, or (at your option)
# any later version.

# GNU Emacs is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with GNU Emacs; see the file COPYING.  If not, write to
# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
# Boston, MA 02110-1301, USA.

SHELL = /bin/sh

lisp=@srcdir@
VPATH=@srcdir@
srcdir=@srcdir@/..

# You can specify a different executable on the make command line,
# e.g. "make EMACS=../src/emacs ...".

EMACS = ../src/emacs

# Command line flags for Emacs.  This must include --multibyte,
# otherwise some files will not compile.

EMACSOPT = -batch --no-site-file --multibyte

SOURCES = *.el COPYING Makefile
lisptagsfiles1 = $(lisp)/[a-zA-Z]*.el
lisptagsfiles2 = $(lisp)/[a-zA-Z]*/[a-zA-Z]*.el
ETAGS = ../lib-src/etags

# Elisp files auto-generated.
AUTOGENEL = loaddefs.el \
	cus-load.el \
	finder-inf.el \
	subdirs.el \
	eshell/esh-groups.el \
	mh-e/mh-loaddefs.el

# Files to compile before others during a bootstrap.  This is done to
# speed up the bootstrap process.  The CC files are compiled first
# because CC mode tweaks the compilation process, and requiring
# cc-mode when it is not compiled doesn't work during the
# bootstrapping.

COMPILE_FIRST = \
	$(lisp)/emacs-lisp/byte-opt.el \
	$(lisp)/emacs-lisp/bytecomp.el \
	$(lisp)/subr.el \
	$(lisp)/progmodes/cc-mode.el \
	$(lisp)/progmodes/cc-vars.el

# The actual Emacs command run in the targets below.

emacs = EMACSLOADPATH=$(lisp) $(EMACS) $(EMACSOPT)

# Common command to find subdirectories

setwins=subdirs=`(cd $$wd; find . -type d -print)`; \
	for file in $$subdirs; do \
	   case $$file in */Old | */RCS | */CVS | */CVS/* | */.* | */.*/* | */=* ) ;; \
		*) wins="$$wins $$wd/$$file" ;; \
	   esac; \
        done

# Find all subdirectories except `obsolete'.

setwins_almost=subdirs=`(cd $$wd; find . -type d -print)`; \
	for file in $$subdirs; do \
	   case $$file in */Old | */RCS | */CVS | */CVS/* | */.* | */.*/* | */=* | */obsolete | */term ) ;; \
		*) wins="$$wins $$wd/$$file" ;; \
	   esac; \
        done

doit:

$(lisp)/cus-load.el:
	touch $@
custom-deps: $(lisp)/subdirs.el $(lisp)/loaddefs.el $(lisp)/cus-load.el doit
	wd=$(lisp); $(setwins_almost); \
	echo Directories: $$wins; \
	$(emacs) -l cus-dep --eval '(setq generated-custom-dependencies-file "$(lisp)/cus-load.el")' -f custom-make-dependencies $$wins

finder-data: $(lisp)/subdirs.el $(lisp)/loaddefs.el doit
	wd=$(lisp); $(setwins_almost); \
	echo Directories: $$wins; \
	$(emacs) -l finder --eval '(setq generated-finder-keywords-file "$(lisp)/finder-inf.el")' -f finder-compile-keywords-make-dist $$wins

$(lisp)/loaddefs.el:
	echo ";;; loaddefs.el --- automatically extracted autoloads" >> $@
	echo ";;" >> $@; echo ";;; Code:" >> $@
	echo "" >> $@
	echo ";; Local Variables:" >> $@
	echo ";; version-control: never" >> $@
	echo ";; no-byte-compile: t" >> $@
	echo ";; no-update-autoloads: t" >> $@
	echo ";; End:" >> $@
	echo ";;; loaddefs.el ends here" >> $@
autoloads: $(lisp)/subdirs.el $(lisp)/loaddefs.el doit
	wd=$(lisp); $(setwins_almost); \
	echo Directories: $$wins; \
	$(emacs) -l autoload --eval '(setq generated-autoload-file "$(lisp)/loaddefs.el")' -f batch-update-autoloads $$wins

$(lisp)/subdirs.el:
	$(MAKE) $(MFLAGS) update-subdirs
update-subdirs: doit
	wd=$(lisp); $(setwins); \
	for file in $$wins; do \
	   $(srcdir)/update-subdirs $$file; \
	done;

updates: update-subdirs autoloads finder-data custom-deps

# This is useful after "cvs up".
cvs-update: recompile autoloads finder-data custom-deps

# Update the AUTHORS file.

update-authors:
	$(emacs) -l authors -f batch-update-authors $(srcdir)/etc/AUTHORS $(srcdir)

TAGS: $(lisptagsfiles1) $(lisptagsfiles2)
	els=`echo $(lisptagsfiles1) $(lisptagsfiles2) | sed -e "s,$(lisp)/loaddefs[^ ]*,," -e "s,$(lisp)/ldefs-boot[^ ]*,,"`; \
	${ETAGS} $$els

TAGS-LISP: $(lisptagsfiles1) $(lisptagsfiles2)
	els=`echo $(lisptagsfiles1) $(lisptagsfiles2) | sed -e "s,$(lisp)/loaddefs[^ ]*,," -e "s,$(lisp)/ldefs-boot[^ ]*,,"`; \
	${ETAGS} -o TAGS-LISP $$els

.SUFFIXES: .elc .el

.el.elc: $(lisp)/subdirs.el
	-$(emacs) -f batch-byte-compile $<

# Compile all Lisp files, but don't recompile those that are up to
# date.  Some files don't actually get compiled because they set the
# local variable no-byte-compile.

# All .elc files are made writable before compilation in case we
# checked out read-only (CVS option -r).  Files MUST be compiled one by
# one.  If we compile several files in a row we can't make sure that
# the compilation environment is clean.  We also set the load-path of
# the Emacs used for compilation to the current directory and its
# subdirectories, to make sure require's and load's in the files being
# compiled find the right files.

# `|| true' below prevents old Bash versions from getting confused
# by an error.
compile: $(lisp)/subdirs.el mh-autoloads doit
	find $(lisp) -name "*.elc" -print | xargs chmod +w >/dev/null 2>&1 || true; \
	wd=$(lisp); $(setwins);	\
	els=`echo $$wins | tr ' \011' '\012\012' | \
		sed -e 's|\(.\)$$|\1/|' -e 's|^\./||' -e 's|$$|*.el|'`;	\
	for el in $(COMPILE_FIRST) $$els; do \
	  if test -f $$el; \
	  then \
	    echo Compiling $$el; \
	    $(emacs) -f batch-byte-compile-if-not-done $$el || exit 1; \
	  fi \
	done

# Compile all Lisp files.  This is like `compile' but compiles files
# unconditionally.  Some files don't actually get compiled because they
# set the local variable no-byte-compile.

compile-always: $(lisp)/subdirs.el mh-autoloads doit
	# `|| true' prevents old Bash versions from getting confused
	# by an error.
	find $(lisp) -name "*.elc" -print | xargs chmod +w >/dev/null 2>&1 || true; \
	wd=$(lisp); $(setwins);	\
	els=`echo $$wins | tr ' \011' '\012\012' | \
		sed -e 's|\(.\)$$|\1/|' -e 's|^\./||' -e 's|$$|*.el|'`;	\
	for el in $(COMPILE_FIRST) $$els; do \
	  if test -f $$el; \
	  then \
	    echo Compiling $$el; \
	    $(emacs) -f batch-byte-compile $$el || exit 1; \
	  fi \
	done

compile-calc:
	for el in `find $(lisp)/calc -name '*.el'`; do \
	  echo Compiling $$el; \
	  $(emacs) -f batch-byte-compile $$el || exit 1; \
	done

# Backup compiled Lisp files in elc.tar.gz.  If that file already
# exists, make a backup of it.

backup-compiled-files:
	-mv $(lisp)/elc.tar.gz $(lisp)/elc.tar.gz~
	-tar czf $(lisp)/elc.tar.gz $(lisp)/*.elc $(lisp)/*/*.elc

# Compile Lisp files, but save old compiled files first.

compile-after-backup: backup-compiled-files compile-always

# Recompile all Lisp files which are newer than their .elc files and compile
# new ones.

recompile: doit mh-autoloads $(lisp)/progmodes/cc-mode.elc
	$(emacs) --eval "(batch-byte-recompile-directory 0)" $(lisp)

# CC Mode uses a compile time macro system which causes a compile time
# dependency in cc-mode.elc on the macros in cc-langs.el and the
# version string in cc-defs.el.
$(lisp)/progmodes/cc-mode.elc: \
	$(lisp)/progmodes/cc-mode.el \
	$(lisp)/progmodes/cc-langs.el \
	$(lisp)/progmodes/cc-defs.el
	$(emacs) -f batch-byte-compile $(lisp)/progmodes/cc-mode.el

# Update MH-E internal autoloads. These are not to be confused with
# the autoloads for the MH-E entry points, which are already in
# loaddefs.el.
MH_E_SRC = $(lisp)/mh-e/mh-acros.el $(lisp)/mh-e/mh-alias.el	\
	$(lisp)/mh-e/mh-buffers.el $(lisp)/mh-e/mh-compat.el	\
	$(lisp)/mh-e/mh-comp.el $(lisp)/mh-e/mh-e.el		\
	$(lisp)/mh-e/mh-folder.el $(lisp)/mh-e/mh-funcs.el	\
	$(lisp)/mh-e/mh-gnus.el $(lisp)/mh-e/mh-identity.el	\
	$(lisp)/mh-e/mh-inc.el $(lisp)/mh-e/mh-junk.el		\
	$(lisp)/mh-e/mh-letter.el $(lisp)/mh-e/mh-limit.el	\
	$(lisp)/mh-e/mh-mime.el $(lisp)/mh-e/mh-print.el	\
	$(lisp)/mh-e/mh-scan.el $(lisp)/mh-e/mh-search.el	\
	$(lisp)/mh-e/mh-seq.el $(lisp)/mh-e/mh-show.el		\
	$(lisp)/mh-e/mh-speed.el $(lisp)/mh-e/mh-thread.el	\
	$(lisp)/mh-e/mh-tool-bar.el $(lisp)/mh-e/mh-utils.el	\
	$(lisp)/mh-e/mh-xface.el

mh-autoloads: $(lisp)/mh-e/mh-loaddefs.el
$(lisp)/mh-e/mh-loaddefs.el: $(lisp)/subdirs.el $(MH_E_SRC)
	echo ";;; mh-loaddefs.el --- automatically extracted autoloads" > $@
	echo "" >> $@
	echo ";; Copyright (C) 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc." >> $@
	echo ";; Author: Bill Wohler <[e-mail]>" >> $@
	echo ";; Keywords: mail" >> $@
	echo ";;; Commentary:" >> $@
	echo ";;; Change Log:" >> $@
	echo ";;; Code:" >> $@
	echo "" >> $@
	echo "(provide 'mh-loaddefs)" >> $@
	echo ";; Local Variables:" >> $@
	echo ";; version-control: never" >> $@
	echo ";; no-byte-compile: t" >> $@
	echo ";; no-update-autoloads: t" >> $@
	echo ";; End:" >> $@
	echo ";;; mh-loaddefs.el ends here" >> $@
	$(emacs) \
	   -l autoload \
	   --eval "(setq generate-autoload-cookie \";;;###mh-autoload\")" \
	   --eval "(setq generated-autoload-file \"$(lisp)/mh-e/mh-loaddefs.el\")" \
	   --eval "(setq make-backup-files nil)" \
	   -f batch-update-autoloads $(lisp)/mh-e

# Prepare a bootstrap in the lisp subdirectory.
#
# Build loaddefs.el to make sure it's up-to-date.  If it's not, that
# might lead to errors during the bootstrap because something fails to
# autoload as expected.  If there is no emacs binary, then we can't
# build autoloads yet.  In that case we have to use ldefs-boot.el.
# Bootstrap should always work with ldefs-boot.el.  Therefore,
# whenever a new autoload cookie gets added that is necessary during
# bootstrapping, ldefs-boot.el should be updated by overwriting it with
# an up-to-date copy of loaddefs.el that is uncorrupted by
# local changes.  (Because loaddefs.el is an automatically generated
# file, we don't want to store it in the source repository).
#
# The chmod +w is to handle env var CVSREAD=1.  Files named
# are identified by being the value of `generated-autoload-file'.

bootstrap-prepare:
	if test -x $(EMACS); then				\
	  $(MAKE) $(MFLAGS) autoloads;				\
	else							\
	  cp $(lisp)/ldefs-boot.el $(lisp)/loaddefs.el;		\
	fi
	chmod +w $(lisp)/loaddefs.el		\
	  $(lisp)/ps-print.el			\
	  $(lisp)/emacs-lisp/cl-loaddefs.el

maintainer-clean: distclean
	cd $(lisp); rm -f *.elc */*.elc $(AUTOGENEL)

bootstrap-clean:
	cd $(lisp); rm -f *.elc */*.elc

# Generate/update files for the bootstrap process.

bootstrap: update-subdirs autoloads compile

# Generate/update files after the bootstrap process.
# custom-deps needs `preloaded-file-list'.

bootstrap-after: finder-data custom-deps

distclean:
	-rm -f ./Makefile

# Makefile ends here.