annotate src/w32proc.c @ 23803:f112aa8f8f5d

(Vw32_phantom_key_code): New variable. (Qhyper, Qsuper, Qmeta, Qalt, Qctrl, Qcontrol, Qshift): New variables. (syms_of_w32fns): Init and register them. (reset_modifiers): Use a more precise test for whether Emacs has keyboard focus. Synchronize state of all keys that can be used as modifiers, to overcome problems arising from hot-keys. (w32_key_to_modifier): Be careful not to call intern() to avoid requiring thread synchronization. (w32_msg_pump): Handle new WM_EMACS_TOGGLE_LOCK_KEY message. (w32_wnd_proc): Ensure lock key indicator lights are updated promptly on Windows 9x, by passing key events on to the system. (w32_wnd_proc): Use Vw32_phantom_key_code to stop system responding to Windows key events when not wanted. (w32_wnd_proc): Undo the mapping of Ctrl-Pause into cancel and Ctrl-NumLock into pause by the system. (w32_wnd_proc): Don't translate key combinations containing any modifiers other than shift (and capslock). (w32_wnd_proc): Reset modifier key states when receiving focus (we can't determine the key states until we have keyboard focus). (Fw32_toggle_lock_key): New function. (syms_of_w32fns): Defsubr it.

/* Process support for GNU Emacs on the Microsoft W32 API.
   Copyright (C) 1992, 1995 Free Software Foundation, Inc.

This file is part of GNU Emacs.

GNU Emacs is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.

GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU Emacs; see the file COPYING.  If not, write to
the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA.

   Drew Bliss                   Oct 14, 1993
     Adapted from alarm.c by Tim Fleehart
*/

#include <stdio.h>
#include <stdlib.h>
#include <errno.h>
#include <io.h>
#include <fcntl.h>
#include <signal.h>

/* must include CRT headers *before* config.h */
#include "config.h"
#undef signal
#undef wait
#undef spawnve
#undef select
#undef kill

#include <windows.h>

#include "lisp.h"
#include "w32.h"
#include "w32heap.h"
#include "systime.h"
#include "syswait.h"
#include "process.h"
#include "w32term.h"

/* Control whether spawnve quotes arguments as necessary to ensure
   correct parsing by child process.  Because not all uses of spawnve
   are careful about constructing argv arrays, we make this behaviour
   conditional (off by default). */
Lisp_Object Vw32_quote_process_args;

/* Control whether create_child causes the process' window to be
   hidden.  The default is nil. */
Lisp_Object Vw32_start_process_show_window;

/* Control whether create_child causes the process to inherit Emacs'
   console window, or be given a new one of its own.  The default is
   nil, to allow multiple DOS programs to run on Win95.  Having separate
   consoles also allows Emacs to cleanly terminate process groups.  */
Lisp_Object Vw32_start_process_share_console;

/* Time to sleep before reading from a subprocess output pipe - this
   avoids the inefficiency of frequently reading small amounts of data.
   This is primarily necessary for handling DOS processes on Windows 95,
   but is useful for W32 processes on both Windows 95 and NT as well.  */
Lisp_Object Vw32_pipe_read_delay;

/* Control conversion of upper case file names to lower case.
   nil means no, t means yes. */
Lisp_Object Vw32_downcase_file_names;

/* Control whether stat() attempts to generate fake but hopefully
   "accurate" inode values, by hashing the absolute truenames of files.
   This should detect aliasing between long and short names, but still
   allows the possibility of hash collisions.  */
Lisp_Object Vw32_generate_fake_inodes;

/* Control whether stat() attempts to determine file type and link count
   exactly, at the expense of slower operation.  Since true hard links
   are supported on NTFS volumes, this is only relevant on NT.  */
Lisp_Object Vw32_get_true_file_attributes;

Lisp_Object Qhigh, Qlow;

#ifndef SYS_SIGLIST_DECLARED
extern char *sys_siglist[];
#endif

#ifdef EMACSDEBUG
void _DebPrint (const char *fmt, ...)
{
  char buf[1024];
  va_list args;

  va_start (args, fmt);
  vsprintf (buf, fmt, args);
  va_end (args);
  OutputDebugString (buf);
}
#endif

typedef void (_CALLBACK_ *signal_handler)(int);

/* Signal handlers...SIG_DFL == 0 so this is initialized correctly.  */
static signal_handler sig_handlers[NSIG];

/* Fake signal implementation to record the SIGCHLD handler.  */
signal_handler 
sys_signal (int sig, signal_handler handler)
{
  signal_handler old;
  
  if (sig != SIGCHLD)
    {
      errno = EINVAL;
      return SIG_ERR;
    }
  old = sig_handlers[sig];
  sig_handlers[sig] = handler;
  return old;
}

/* Defined in <process.h> which conflicts with the local copy */
#define _P_NOWAIT 1

/* Child process management list.  */
int child_proc_count = 0;
child_process child_procs[ MAX_CHILDREN ];
child_process *dead_child = NULL;

DWORD WINAPI reader_thread (void *arg);

/* Find an unused process slot.  */
child_process *
new_child (void)
{
  child_process *cp;
  DWORD id;
  
  for (cp = child_procs+(child_proc_count-1); cp >= child_procs; cp--)
    if (!CHILD_ACTIVE (cp))
      goto Initialise;
  if (child_proc_count == MAX_CHILDREN)
    return NULL;
  cp = &child_procs[child_proc_count++];

 Initialise:
  memset (cp, 0, sizeof(*cp));
  cp->fd = -1;
  cp->pid = -1;
  cp->procinfo.hProcess = NULL;
  cp->status = STATUS_READ_ERROR;

  /* use manual reset event so that select() will function properly */
  cp->char_avail = CreateEvent (NULL, TRUE, FALSE, NULL);
  if (cp->char_avail)
    {
      cp->char_consumed = CreateEvent (NULL, FALSE, FALSE, NULL);
      if (cp->char_consumed)
        {
	  cp->thrd = CreateThread (NULL, 1024, reader_thread, cp, 0, &id);
	  if (cp->thrd)
	    return cp;
	}
    }
  delete_child (cp);
  return NULL;
}

void 
delete_child (child_process *cp)
{
  int i;

  /* Should not be deleting a child that is still needed. */
  for (i = 0; i < MAXDESC; i++)
    if (fd_info[i].cp == cp)
      abort ();

  if (!CHILD_ACTIVE (cp))
    return;

  /* reap thread if necessary */
  if (cp->thrd)
    {
      DWORD rc;

      if (GetExitCodeThread (cp->thrd, &rc) && rc == STILL_ACTIVE)
        {
	  /* let the thread exit cleanly if possible */
	  cp->status = STATUS_READ_ERROR;
	  SetEvent (cp->char_consumed);
	  if (WaitForSingleObject (cp->thrd, 1000) != WAIT_OBJECT_0)
	    {
	      DebPrint (("delete_child.WaitForSingleObject (thread) failed "
			 "with %lu for fd %ld\n", GetLastError (), cp->fd));
	      TerminateThread (cp->thrd, 0);
	    }
	}
      CloseHandle (cp->thrd);
      cp->thrd = NULL;
    }
  if (cp->char_avail)
    {
      CloseHandle (cp->char_avail);
      cp->char_avail = NULL;
    }
  if (cp->char_consumed)
    {
      CloseHandle (cp->char_consumed);
      cp->char_consumed = NULL;
    }

  /* update child_proc_count (highest numbered slot in use plus one) */
  if (cp == child_procs + child_proc_count - 1)
    {
      for (i = child_proc_count-1; i >= 0; i--)
	if (CHILD_ACTIVE (&child_procs[i]))
	  {
	    child_proc_count = i + 1;
	    break;
	  }
    }
  if (i < 0)
    child_proc_count = 0;
}

/* Find a child by pid.  */
static child_process *
find_child_pid (DWORD pid)
{
  child_process *cp;

  for (cp = child_procs+(child_proc_count-1); cp >= child_procs; cp--)
    if (CHILD_ACTIVE (cp) && pid == cp->pid)
      return cp;
  return NULL;
}


/* Thread proc for child process and socket reader threads. Each thread
   is normally blocked until woken by select() to check for input by
   reading one char.  When the read completes, char_avail is signalled
   to wake up the select emulator and the thread blocks itself again. */
DWORD WINAPI 
reader_thread (void *arg)
{
  child_process *cp;
  
  /* Our identity */
  cp = (child_process *)arg;
  
  /* We have to wait for the go-ahead before we can start */
  if (cp == NULL
      || WaitForSingleObject (cp->char_consumed, INFINITE) != WAIT_OBJECT_0)
    return 1;

  for (;;)
    {
      int rc;

      rc = _sys_read_ahead (cp->fd);

      /* The name char_avail is a misnomer - it really just means the
	 read-ahead has completed, whether successfully or not. */
      if (!SetEvent (cp->char_avail))
        {
	  DebPrint (("reader_thread.SetEvent failed with %lu for fd %ld\n",
		     GetLastError (), cp->fd));
	  return 1;
	}

      if (rc == STATUS_READ_ERROR)
	return 1;
        
      /* If the read died, the child has died so let the thread die */
      if (rc == STATUS_READ_FAILED)
	break;
        
      /* Wait until our input is acknowledged before reading again */
      if (WaitForSingleObject (cp->char_consumed, INFINITE) != WAIT_OBJECT_0)
        {
	  DebPrint (("reader_thread.WaitForSingleObject failed with "
		     "%lu for fd %ld\n", GetLastError (), cp->fd));
	  break;
        }
    }
  return 0;
}

/* To avoid Emacs changing directory, we just record here the directory
   the new process should start in.  This is set just before calling
   sys_spawnve, and is not generally valid at any other time.  */
static char * process_dir;

static BOOL 
create_child (char *exe, char *cmdline, char *env,
	      int * pPid, child_process *cp)
{
  STARTUPINFO start;
  SECURITY_ATTRIBUTES sec_attrs;
  SECURITY_DESCRIPTOR sec_desc;
  char dir[ MAXPATHLEN ];
  
  if (cp == NULL) abort ();
  
  memset (&start, 0, sizeof (start));
  start.cb = sizeof (start);
  
#ifdef HAVE_NTGUI
  if (NILP (Vw32_start_process_show_window))
    start.dwFlags = STARTF_USESTDHANDLES | STARTF_USESHOWWINDOW;
  else
    start.dwFlags = STARTF_USESTDHANDLES;
  start.wShowWindow = SW_HIDE;

  start.hStdInput = GetStdHandle (STD_INPUT_HANDLE);
  start.hStdOutput = GetStdHandle (STD_OUTPUT_HANDLE);
  start.hStdError = GetStdHandle (STD_ERROR_HANDLE);
#endif /* HAVE_NTGUI */

  /* Explicitly specify no security */
  if (!InitializeSecurityDescriptor (&sec_desc, SECURITY_DESCRIPTOR_REVISION))
    goto EH_Fail;
  if (!SetSecurityDescriptorDacl (&sec_desc, TRUE, NULL, FALSE))
    goto EH_Fail;
  sec_attrs.nLength = sizeof (sec_attrs);
  sec_attrs.lpSecurityDescriptor = &sec_desc;
  sec_attrs.bInheritHandle = FALSE;
  
  strcpy (dir, process_dir);
  unixtodos_filename (dir);
  
  if (!CreateProcess (exe, cmdline, &sec_attrs, NULL, TRUE,
		      (!NILP (Vw32_start_process_share_console)
		       ? CREATE_NEW_PROCESS_GROUP
		       : CREATE_NEW_CONSOLE),
		      env, dir,
		      &start, &cp->procinfo))
    goto EH_Fail;

  cp->pid = (int) cp->procinfo.dwProcessId;

  /* Hack for Windows 95, which assigns large (ie negative) pids */
  if (cp->pid < 0)
    cp->pid = -cp->pid;

  /* pid must fit in a Lisp_Int */
  cp->pid = (cp->pid & VALMASK);

  *pPid = cp->pid;

  return TRUE;

 EH_Fail:
  DebPrint (("create_child.CreateProcess failed: %ld\n", GetLastError()););
  return FALSE;
}

/* create_child doesn't know what emacs' file handle will be for waiting
   on output from the child, so we need to make this additional call
   to register the handle with the process
   This way the select emulator knows how to match file handles with
   entries in child_procs.  */
void 
register_child (int pid, int fd)
{
  child_process *cp;
  
  cp = find_child_pid (pid);
  if (cp == NULL)
    {
      DebPrint (("register_child unable to find pid %lu\n", pid));
      return;
    }
  
#ifdef FULL_DEBUG
  DebPrint (("register_child registered fd %d with pid %lu\n", fd, pid));
#endif
  
  cp->fd = fd;

  /* thread is initially blocked until select is called; set status so
     that select will release thread */
  cp->status = STATUS_READ_ACKNOWLEDGED;

  /* attach child_process to fd_info */
  if (fd_info[fd].cp != NULL)
    {
      DebPrint (("register_child: fd_info[%d] apparently in use!\n", fd));
      abort ();
    }

  fd_info[fd].cp = cp;
}

/* When a process dies its pipe will break so the reader thread will
   signal failure to the select emulator.
   The select emulator then calls this routine to clean up.
   Since the thread signaled failure we can assume it is exiting.  */
static void 
reap_subprocess (child_process *cp)
{
  if (cp->procinfo.hProcess)
    {
      /* Reap the process */
#ifdef FULL_DEBUG
      /* Process should have already died before we are called.  */
      if (WaitForSingleObject (cp->procinfo.hProcess, 0) != WAIT_OBJECT_0)
	DebPrint (("reap_subprocess: child fpr fd %d has not died yet!", cp->fd));
#endif
      CloseHandle (cp->procinfo.hProcess);
      cp->procinfo.hProcess = NULL;
      CloseHandle (cp->procinfo.hThread);
      cp->procinfo.hThread = NULL;
    }

  /* For asynchronous children, the child_proc resources will be freed
     when the last pipe read descriptor is closed; for synchronous
     children, we must explicitly free the resources now because
     register_child has not been called. */
  if (cp->fd == -1)
    delete_child (cp);
}

/* Wait for any of our existing child processes to die
   When it does, close its handle
   Return the pid and fill in the status if non-NULL.  */

int 
sys_wait (int *status)
{
  DWORD active, retval;
  int nh;
  int pid;
  child_process *cp, *cps[MAX_CHILDREN];
  HANDLE wait_hnd[MAX_CHILDREN];
  
  nh = 0;
  if (dead_child != NULL)
    {
      /* We want to wait for a specific child */
      wait_hnd[nh] = dead_child->procinfo.hProcess;
      cps[nh] = dead_child;
      if (!wait_hnd[nh]) abort ();
      nh++;
      active = 0;
      goto get_result;
    }
  else
    {
      for (cp = child_procs+(child_proc_count-1); cp >= child_procs; cp--)
	/* some child_procs might be sockets; ignore them */
	if (CHILD_ACTIVE (cp) && cp->procinfo.hProcess)
	  {
	    wait_hnd[nh] = cp->procinfo.hProcess;
	    cps[nh] = cp;
	    nh++;
	  }
    }
  
  if (nh == 0)
    {
      /* Nothing to wait on, so fail */
      errno = ECHILD;
      return -1;
    }

  do
    {
      /* Check for quit about once a second. */
      QUIT;
      active = WaitForMultipleObjects (nh, wait_hnd, FALSE, 1000);
    } while (active == WAIT_TIMEOUT);

  if (active == WAIT_FAILED)
    {
      errno = EBADF;
      return -1;
    }
  else if (active >= WAIT_OBJECT_0
	   && active < WAIT_OBJECT_0+MAXIMUM_WAIT_OBJECTS)
    {
      active -= WAIT_OBJECT_0;
    }
  else if (active >= WAIT_ABANDONED_0
	   && active < WAIT_ABANDONED_0+MAXIMUM_WAIT_OBJECTS)
    {
      active -= WAIT_ABANDONED_0;
    }
  else
    abort ();

get_result:
  if (!GetExitCodeProcess (wait_hnd[active], &retval))
    {
      DebPrint (("Wait.GetExitCodeProcess failed with %lu\n",
		 GetLastError ()));
      retval = 1;
    }
  if (retval == STILL_ACTIVE)
    {
      /* Should never happen */
      DebPrint (("Wait.WaitForMultipleObjects returned an active process\n"));
      errno = EINVAL;
      return -1;
    }

  /* Massage the exit code from the process to match the format expected
     by the WIFSTOPPED et al macros in syswait.h.  Only WIFSIGNALED and
     WIFEXITED are supported; WIFSTOPPED doesn't make sense under NT.  */

  if (retval == STATUS_CONTROL_C_EXIT)
    retval = SIGINT;
  else
    retval <<= 8;
  
  cp = cps[active];
  pid = cp->pid;
#ifdef FULL_DEBUG
  DebPrint (("Wait signaled with process pid %d\n", cp->pid));
#endif

  if (status)
    {
      *status = retval;
    }
  else if (synch_process_alive)
    {
      synch_process_alive = 0;

      /* Report the status of the synchronous process.  */
      if (WIFEXITED (retval))
	synch_process_retcode = WRETCODE (retval);
      else if (WIFSIGNALED (retval))
	{
	  int code = WTERMSIG (retval);
	  char *signame = 0;
	  
	  if (code < NSIG)
	    {
	      /* Suppress warning if the table has const char *.  */
	      signame = (char *) sys_siglist[code];
	    }
	  if (signame == 0)
	    signame = "unknown";

	  synch_process_death = signame;
	}

      reap_subprocess (cp);
    }

  reap_subprocess (cp);
  
  return pid;
}

void
w32_executable_type (char * filename, int * is_dos_app, int * is_cygnus_app)
{
  file_data executable;
  char * p;
  
  /* Default values in case we can't tell for sure.  */
  *is_dos_app = FALSE;
  *is_cygnus_app = FALSE;

  if (!open_input_file (&executable, filename))
    return;

  p = strrchr (filename, '.');
  
  /* We can only identify DOS .com programs from the extension. */
  if (p && stricmp (p, ".com") == 0)
    *is_dos_app = TRUE;
  else if (p && (stricmp (p, ".bat") == 0
		 || stricmp (p, ".cmd") == 0))
    {
      /* A DOS shell script - it appears that CreateProcess is happy to
	 accept this (somewhat surprisingly); presumably it looks at
	 COMSPEC to determine what executable to actually invoke.
	 Therefore, we have to do the same here as well. */
      /* Actually, I think it uses the program association for that
	 extension, which is defined in the registry.  */
      p = egetenv ("COMSPEC");
      if (p)
	w32_executable_type (p, is_dos_app, is_cygnus_app);
    }
  else
    {
      /* Look for DOS .exe signature - if found, we must also check that
	 it isn't really a 16- or 32-bit Windows exe, since both formats
	 start with a DOS program stub.  Note that 16-bit Windows
	 executables use the OS/2 1.x format. */

      IMAGE_DOS_HEADER * dos_header;
      IMAGE_NT_HEADERS * nt_header;

      dos_header = (PIMAGE_DOS_HEADER) executable.file_base;
      if (dos_header->e_magic != IMAGE_DOS_SIGNATURE)
	goto unwind;

      nt_header = (PIMAGE_NT_HEADERS) ((char *) dos_header + dos_header->e_lfanew);

      if ((char *) nt_header > (char *) dos_header + executable.size) 
	{
	  /* Some dos headers (pkunzip) have bogus e_lfanew fields.  */
	  *is_dos_app = TRUE;
	} 
      else if (nt_header->Signature != IMAGE_NT_SIGNATURE
	       && LOWORD (nt_header->Signature) != IMAGE_OS2_SIGNATURE)
  	{
	  *is_dos_app = TRUE;
  	}
      else if (nt_header->Signature == IMAGE_NT_SIGNATURE)
  	{
	  /* Look for cygwin.dll in DLL import list. */
	  IMAGE_DATA_DIRECTORY import_dir =
	    nt_header->OptionalHeader.DataDirectory[IMAGE_DIRECTORY_ENTRY_IMPORT];
	  IMAGE_IMPORT_DESCRIPTOR * imports;
	  IMAGE_SECTION_HEADER * section;

	  section = rva_to_section (import_dir.VirtualAddress, nt_header);
	  imports = RVA_TO_PTR (import_dir.VirtualAddress, section, executable);

	  for ( ; imports->Name; imports++)
  	    {
	      char * dllname = RVA_TO_PTR (imports->Name, section, executable);

	      if (strcmp (dllname, "cygwin.dll") == 0)
		{
		  *is_cygnus_app = TRUE;
		  break;
		}
  	    }
  	}
    }
  
unwind:
  close_file_data (&executable);
}

int
compare_env (const char **strp1, const char **strp2)
{
  const char *str1 = *strp1, *str2 = *strp2;

  while (*str1 && *str2 && *str1 != '=' && *str2 != '=')
    {
      if (tolower (*str1) > tolower (*str2))
	return 1;
      else if (tolower (*str1) < tolower (*str2))
	return -1;
      str1++, str2++;
    }

  if (*str1 == '=' && *str2 == '=')
    return 0;
  else if (*str1 == '=')
    return -1;
  else
    return 1;
}

void
merge_and_sort_env (char **envp1, char **envp2, char **new_envp)
{
  char **optr, **nptr;
  int num;

  nptr = new_envp;
  optr = envp1;
  while (*optr)
    *nptr++ = *optr++;
  num = optr - envp1;

  optr = envp2;
  while (*optr)
    *nptr++ = *optr++;
  num += optr - envp2;

  qsort (new_envp, num, sizeof (char *), compare_env);

  *nptr = NULL;
}

/* When a new child process is created we need to register it in our list,
   so intercept spawn requests.  */
int 
sys_spawnve (int mode, char *cmdname, char **argv, char **envp)
{
  Lisp_Object program, full;
  char *cmdline, *env, *parg, **targ;
  int arglen, numenv;
  int pid;
  child_process *cp;
  int is_dos_app, is_cygnus_app;
  int do_quoting = 0;
  char escape_char;
  /* We pass our process ID to our children by setting up an environment
     variable in their environment.  */
  char ppid_env_var_buffer[64];
  char *extra_env[] = {ppid_env_var_buffer, NULL};

  /* We don't care about the other modes */
  if (mode != _P_NOWAIT)
    {
      errno = EINVAL;
      return -1;
    }

  /* Handle executable names without an executable suffix.  */
  program = make_string (cmdname, strlen (cmdname));
  if (NILP (Ffile_executable_p (program)))
    {
      struct gcpro gcpro1;
      
      full = Qnil;
      GCPRO1 (program);
      openp (Vexec_path, program, EXEC_SUFFIXES, &full, 1);
      UNGCPRO;
      if (NILP (full))
	{
	  errno = EINVAL;
	  return -1;
	}
      program = full;
    }

  /* make sure argv[0] and cmdname are both in DOS format */
  cmdname = XSTRING (program)->data;
  unixtodos_filename (cmdname);
  argv[0] = cmdname;

  /* Determine whether program is a 16-bit DOS executable, or a w32
     executable that is implicitly linked to the Cygnus dll (implying it
     was compiled with the Cygnus GNU toolchain and hence relies on
     cygwin.dll to parse the command line - we use this to decide how to
     escape quote chars in command line args that must be quoted). */
  w32_executable_type (cmdname, &is_dos_app, &is_cygnus_app);

  /* On Windows 95, if cmdname is a DOS app, we invoke a helper
     application to start it by specifying the helper app as cmdname,
     while leaving the real app name as argv[0].  */
  if (is_dos_app)
    {
      cmdname = alloca (MAXPATHLEN);
      if (egetenv ("CMDPROXY"))
	strcpy (cmdname, egetenv ("CMDPROXY"));
      else
	{
	  strcpy (cmdname, XSTRING (Vinvocation_directory)->data);
	  strcat (cmdname, "cmdproxy.exe");
	}
      unixtodos_filename (cmdname);
    }
  
  /* we have to do some conjuring here to put argv and envp into the
     form CreateProcess wants...  argv needs to be a space separated/null
     terminated list of parameters, and envp is a null
     separated/double-null terminated list of parameters.

     Additionally, zero-length args and args containing whitespace or
     quote chars need to be wrapped in double quotes - for this to work,
     embedded quotes need to be escaped as well.  The aim is to ensure
     the child process reconstructs the argv array we start with
     exactly, so we treat quotes at the beginning and end of arguments
     as embedded quotes.

     The w32 GNU-based library from Cygnus doubles quotes to escape
     them, while MSVC uses backslash for escaping.  (Actually the MSVC
     startup code does attempt to recognise doubled quotes and accept
     them, but gets it wrong and ends up requiring three quotes to get a
     single embedded quote!)  So by default we decide whether to use
     quote or backslash as the escape character based on whether the
     binary is apparently a Cygnus compiled app.

     Note that using backslash to escape embedded quotes requires
     additional special handling if an embedded quote is already
     preceeded by backslash, or if an arg requiring quoting ends with
     backslash.  In such cases, the run of escape characters needs to be
     doubled.  For consistency, we apply this special handling as long
     as the escape character is not quote.

     Since we have no idea how large argv and envp are likely to be we
     figure out list lengths on the fly and allocate them.  */

  if (!NILP (Vw32_quote_process_args))
    {
      do_quoting = 1;
      /* Override escape char by binding w32-quote-process-args to
	 desired character, or use t for auto-selection.  */
      if (INTEGERP (Vw32_quote_process_args))
	escape_char = XINT (Vw32_quote_process_args);
      else
	escape_char = is_cygnus_app ? '"' : '\\';
    }
  
  /* do argv...  */
  arglen = 0;
  targ = argv;
  while (*targ)
    {
      char * p = *targ;
      int need_quotes = 0;
      int escape_char_run = 0;

      if (*p == 0)
	need_quotes = 1;
      for ( ; *p; p++)
	{
	  if (*p == '"')
	    {
	      /* allow for embedded quotes to be escaped */
	      arglen++;
	      need_quotes = 1;
	      /* handle the case where the embedded quote is already escaped */
	      if (escape_char_run > 0)
		{
		  /* To preserve the arg exactly, we need to double the
		     preceding escape characters (plus adding one to
		     escape the quote character itself).  */
		  arglen += escape_char_run;
		}
	    }
	  else if (*p == ' ' || *p == '\t')
	    {
	      need_quotes = 1;
	    }

	  if (*p == escape_char && escape_char != '"')
	    escape_char_run++;
	  else
	    escape_char_run = 0;
	}
      if (need_quotes)
	{
	  arglen += 2;
	  /* handle the case where the arg ends with an escape char - we
	     must not let the enclosing quote be escaped.  */
	  if (escape_char_run > 0)
	    arglen += escape_char_run;
	}
      arglen += strlen (*targ++) + 1;
    }
  cmdline = alloca (arglen);
  targ = argv;
  parg = cmdline;
  while (*targ)
    {
      char * p = *targ;
      int need_quotes = 0;

      if (*p == 0)
	need_quotes = 1;

      if (do_quoting)
	{
	  for ( ; *p; p++)
	    if (*p == ' ' || *p == '\t' || *p == '"')
	      need_quotes = 1;
	}
      if (need_quotes)
	{
	  int escape_char_run = 0;
	  char * first;
	  char * last;

	  p = *targ;
	  first = p;
	  last = p + strlen (p) - 1;
	  *parg++ = '"';
#if 0
	  /* This version does not escape quotes if they occur at the
	     beginning or end of the arg - this could lead to incorrect
	     behaviour when the arg itself represents a command line
	     containing quoted args.  I believe this was originally done
	     as a hack to make some things work, before
	     `w32-quote-process-args' was added.  */
	  while (*p)
	    {
	      if (*p == '"' && p > first && p < last)
		*parg++ = escape_char;	/* escape embedded quotes */
	      *parg++ = *p++;
	    }
#else
	  for ( ; *p; p++)
	    {
	      if (*p == '"')
		{
		  /* double preceding escape chars if any */
		  while (escape_char_run > 0)
		    {
		      *parg++ = escape_char;
		      escape_char_run--;
		    }
		  /* escape all quote chars, even at beginning or end */
		  *parg++ = escape_char;
		}
	      *parg++ = *p;

	      if (*p == escape_char && escape_char != '"')
		escape_char_run++;
	      else
		escape_char_run = 0;
	    }
	  /* double escape chars before enclosing quote */
	  while (escape_char_run > 0)
	    {
	      *parg++ = escape_char;
	      escape_char_run--;
	    }
#endif
	  *parg++ = '"';
	}
      else
	{
	  strcpy (parg, *targ);
	  parg += strlen (*targ);
	}
      *parg++ = ' ';
      targ++;
    }
  *--parg = '\0';
  
  /* and envp...  */
  arglen = 1;
  targ = envp;
  numenv = 1; /* for end null */
  while (*targ)
    {
      arglen += strlen (*targ++) + 1;
      numenv++;
    }
  /* extra env vars... */
  sprintf (ppid_env_var_buffer, "EM_PARENT_PROCESS_ID=%d", 
	   GetCurrentProcessId ());
  arglen += strlen (ppid_env_var_buffer) + 1;
  numenv++;

  /* merge env passed in and extra env into one, and sort it.  */
  targ = (char **) alloca (numenv * sizeof (char *));
  merge_and_sort_env (envp, extra_env, targ);

  /* concatenate env entries.  */
  env = alloca (arglen);
  parg = env;
  while (*targ)
    {
      strcpy (parg, *targ);
      parg += strlen (*targ++);
      *parg++ = '\0';
    }
  *parg++ = '\0';
  *parg = '\0';

  cp = new_child ();
  if (cp == NULL)
    {
      errno = EAGAIN;
      return -1;
    }
  
  /* Now create the process.  */
  if (!create_child (cmdname, cmdline, env, &pid, cp))
    {
      delete_child (cp);
      errno = ENOEXEC;
      return -1;
    }
  
  return pid;
}

/* Emulate the select call
   Wait for available input on any of the given rfds, or timeout if
   a timeout is given and no input is detected
   wfds and efds are not supported and must be NULL.

   For simplicity, we detect the death of child processes here and
   synchronously call the SIGCHLD handler.  Since it is possible for
   children to be created without a corresponding pipe handle from which
   to read output, we wait separately on the process handles as well as
   the char_avail events for each process pipe.  We only call
   wait/reap_process when the process actually terminates.

   To reduce the number of places in which Emacs can be hung such that
   C-g is not able to interrupt it, we always wait on interrupt_handle
   (which is signalled by the input thread when C-g is detected).  If we
   detect that we were woken up by C-g, we return -1 with errno set to
   EINTR as on Unix.  */

/* From ntterm.c */
extern HANDLE keyboard_handle;

/* From w32xfns.c */
extern HANDLE interrupt_handle;

/* From process.c */
extern int proc_buffered_char[];

int 
sys_select (int nfds, SELECT_TYPE *rfds, SELECT_TYPE *wfds, SELECT_TYPE *efds,
	    EMACS_TIME *timeout)
{
  SELECT_TYPE orfds;
  DWORD timeout_ms, start_time;
  int i, nh, nc, nr;
  DWORD active;
  child_process *cp, *cps[MAX_CHILDREN];
  HANDLE wait_hnd[MAXDESC + MAX_CHILDREN];
  int fdindex[MAXDESC];   /* mapping from wait handles back to descriptors */
  
  timeout_ms = timeout ? (timeout->tv_sec * 1000 + timeout->tv_usec / 1000) : INFINITE;

  /* If the descriptor sets are NULL but timeout isn't, then just Sleep.  */
  if (rfds == NULL && wfds == NULL && efds == NULL && timeout != NULL) 
    {
      Sleep (timeout_ms);
      return 0;
    }

  /* Otherwise, we only handle rfds, so fail otherwise.  */
  if (rfds == NULL || wfds != NULL || efds != NULL)
    {
      errno = EINVAL;
      return -1;
    }
  
  orfds = *rfds;
  FD_ZERO (rfds);
  nr = 0;

  /* Always wait on interrupt_handle, to detect C-g (quit).  */
  wait_hnd[0] = interrupt_handle;
  fdindex[0] = -1;
  
  /* Build a list of pipe handles to wait on.  */
  nh = 1;
  for (i = 0; i < nfds; i++)
    if (FD_ISSET (i, &orfds))
      {
	if (i == 0)
	  {
	    if (keyboard_handle)
	      {
		/* Handle stdin specially */
		wait_hnd[nh] = keyboard_handle;
		fdindex[nh] = i;
		nh++;
	      }

	    /* Check for any emacs-generated input in the queue since
	       it won't be detected in the wait */
	    if (detect_input_pending ())
	      {
		FD_SET (i, rfds);
		return 1;
	      }
	  }
	else
	  {
	    /* Child process and socket input */
	    cp = fd_info[i].cp;
	    if (cp)
	      {
		int current_status = cp->status;

		if (current_status == STATUS_READ_ACKNOWLEDGED)
		  {
		    /* Tell reader thread which file handle to use. */
		    cp->fd = i;
		    /* Wake up the reader thread for this process */
		    cp->status = STATUS_READ_READY;
		    if (!SetEvent (cp->char_consumed))
		      DebPrint (("nt_select.SetEvent failed with "
				 "%lu for fd %ld\n", GetLastError (), i));
		  }

#ifdef CHECK_INTERLOCK
		/* slightly crude cross-checking of interlock between threads */

		current_status = cp->status;
		if (WaitForSingleObject (cp->char_avail, 0) == WAIT_OBJECT_0)
		  {
		    /* char_avail has been signalled, so status (which may
		       have changed) should indicate read has completed
		       but has not been acknowledged. */
		    current_status = cp->status;
		    if (current_status != STATUS_READ_SUCCEEDED
			&& current_status != STATUS_READ_FAILED)
		      DebPrint (("char_avail set, but read not completed: status %d\n",
				 current_status));
		  }
		else
		  {
		    /* char_avail has not been signalled, so status should
		       indicate that read is in progress; small possibility
		       that read has completed but event wasn't yet signalled
		       when we tested it (because a context switch occurred
		       or if running on separate CPUs). */
		    if (current_status != STATUS_READ_READY
			&& current_status != STATUS_READ_IN_PROGRESS
			&& current_status != STATUS_READ_SUCCEEDED
			&& current_status != STATUS_READ_FAILED)
		      DebPrint (("char_avail reset, but read status is bad: %d\n",
				 current_status));
		  }
#endif
		wait_hnd[nh] = cp->char_avail;
		fdindex[nh] = i;
		if (!wait_hnd[nh]) abort ();
		nh++;
#ifdef FULL_DEBUG
		DebPrint (("select waiting on child %d fd %d\n",
			   cp-child_procs, i));
#endif
	      }
	    else
	      {
		/* Unable to find something to wait on for this fd, skip */

		/* Note that this is not a fatal error, and can in fact
		   happen in unusual circumstances.  Specifically, if
		   sys_spawnve fails, eg. because the program doesn't
		   exist, and debug-on-error is t so Fsignal invokes a
		   nested input loop, then the process output pipe is
		   still included in input_wait_mask with no child_proc
		   associated with it.  (It is removed when the debugger
		   exits the nested input loop and the error is thrown.)  */

		DebPrint (("sys_select: fd %ld is invalid! ignoring\n", i));
	      }
	  }
      }

count_children:
  /* Add handles of child processes.  */
  nc = 0;
  for (cp = child_procs+(child_proc_count-1); cp >= child_procs; cp--)
    /* Some child_procs might be sockets; ignore them.  Also some
       children may have died already, but we haven't finished reading
       the process output; ignore them too.  */
    if (CHILD_ACTIVE (cp) && cp->procinfo.hProcess
	&& (cp->fd < 0
	    || (fd_info[cp->fd].flags & FILE_SEND_SIGCHLD) == 0
	    || (fd_info[cp->fd].flags & FILE_AT_EOF) != 0)
	)
      {
	wait_hnd[nh + nc] = cp->procinfo.hProcess;
	cps[nc] = cp;
	nc++;
      }
  
  /* Nothing to look for, so we didn't find anything */
  if (nh + nc == 0) 
    {
      if (timeout)
	Sleep (timeout_ms);
      return 0;
    }
  
  /* Wait for input or child death to be signalled.  */
  start_time = GetTickCount ();
  active = WaitForMultipleObjects (nh + nc, wait_hnd, FALSE, timeout_ms);

  if (active == WAIT_FAILED)
    {
      DebPrint (("select.WaitForMultipleObjects (%d, %lu) failed with %lu\n",
		 nh + nc, timeout_ms, GetLastError ()));
      /* don't return EBADF - this causes wait_reading_process_input to
	 abort; WAIT_FAILED is returned when single-stepping under
	 Windows 95 after switching thread focus in debugger, and
	 possibly at other times. */
      errno = EINTR;
      return -1;
    }
  else if (active == WAIT_TIMEOUT)
    {
      return 0;
    }
  else if (active >= WAIT_OBJECT_0
	   && active < WAIT_OBJECT_0+MAXIMUM_WAIT_OBJECTS)
    {
      active -= WAIT_OBJECT_0;
    }
  else if (active >= WAIT_ABANDONED_0
	   && active < WAIT_ABANDONED_0+MAXIMUM_WAIT_OBJECTS)
    {
      active -= WAIT_ABANDONED_0;
    }
  else
    abort ();

  /* Loop over all handles after active (now officially documented as
     being the first signalled handle in the array).  We do this to
     ensure fairness, so that all channels with data available will be
     processed - otherwise higher numbered channels could be starved. */
  do
    {
      if (active >= nh)
	{
	  cp = cps[active - nh];

	  /* We cannot always signal SIGCHLD immediately; if we have not
	     finished reading the process output, we must delay sending
	     SIGCHLD until we do.  */

	  if (cp->fd >= 0 && (fd_info[cp->fd].flags & FILE_AT_EOF) == 0)
	    fd_info[cp->fd].flags |= FILE_SEND_SIGCHLD;
	  /* SIG_DFL for SIGCHLD is ignore */
	  else if (sig_handlers[SIGCHLD] != SIG_DFL &&
		   sig_handlers[SIGCHLD] != SIG_IGN)
	    {
#ifdef FULL_DEBUG
	      DebPrint (("select calling SIGCHLD handler for pid %d\n",
			 cp->pid));
#endif
	      dead_child = cp;
	      sig_handlers[SIGCHLD] (SIGCHLD);
	      dead_child = NULL;
	    }
	}
      else if (fdindex[active] == -1)
	{
	  /* Quit (C-g) was detected.  */
	  errno = EINTR;
	  return -1;
	}
      else if (fdindex[active] == 0)
	{
	  /* Keyboard input available */
	  FD_SET (0, rfds);
	  nr++;
	}
      else
	{
	  /* must be a socket or pipe - read ahead should have
             completed, either succeeding or failing.  */
	  FD_SET (fdindex[active], rfds);
	  nr++;
	}

      /* Even though wait_reading_process_output only reads from at most
	 one channel, we must process all channels here so that we reap
	 all children that have died.  */
      while (++active < nh + nc)
	if (WaitForSingleObject (wait_hnd[active], 0) == WAIT_OBJECT_0)
	  break;
    } while (active < nh + nc);

  /* If no input has arrived and timeout hasn't expired, wait again.  */
  if (nr == 0)
    {
      DWORD elapsed = GetTickCount () - start_time;

      if (timeout_ms > elapsed)	/* INFINITE is MAX_UINT */
	{
	  if (timeout_ms != INFINITE)
	    timeout_ms -= elapsed;
	  goto count_children;
	}
    }

  return nr;
}

/* Substitute for certain kill () operations */

static BOOL CALLBACK
find_child_console (HWND hwnd, child_process * cp)
{
  DWORD thread_id;
  DWORD process_id;

  thread_id = GetWindowThreadProcessId (hwnd, &process_id);
  if (process_id == cp->procinfo.dwProcessId)
    {
      char window_class[32];

      GetClassName (hwnd, window_class, sizeof (window_class));
      if (strcmp (window_class,
		  (os_subtype == OS_WIN95)
		  ? "tty"
		  : "ConsoleWindowClass") == 0)
	{
	  cp->hwnd = hwnd;
	  return FALSE;
	}
    }
  /* keep looking */
  return TRUE;
}

int 
sys_kill (int pid, int sig)
{
  child_process *cp;
  HANDLE proc_hand;
  int need_to_free = 0;
  int rc = 0;
  
  /* Only handle signals that will result in the process dying */
  if (sig != SIGINT && sig != SIGKILL && sig != SIGQUIT && sig != SIGHUP)
    {
      errno = EINVAL;
      return -1;
    }

  cp = find_child_pid (pid);
  if (cp == NULL)
    {
      proc_hand = OpenProcess (PROCESS_TERMINATE, 0, pid);
      if (proc_hand == NULL)
        {
	  errno = EPERM;
	  return -1;
	}
      need_to_free = 1;
    }
  else
    {
      proc_hand = cp->procinfo.hProcess;
      pid = cp->procinfo.dwProcessId;

      /* Try to locate console window for process. */
      EnumWindows (find_child_console, (LPARAM) cp);
    }
  
  if (sig == SIGINT)
    {
      if (NILP (Vw32_start_process_share_console) && cp && cp->hwnd)
	{
	  BYTE control_scan_code = (BYTE) MapVirtualKey (VK_CONTROL, 0);
	  BYTE vk_break_code = VK_CANCEL;
	  BYTE break_scan_code = (BYTE) MapVirtualKey (vk_break_code, 0);
	  HWND foreground_window;

	  if (break_scan_code == 0)
	    {
	      /* Fake Ctrl-C if we can't manage Ctrl-Break. */
	      vk_break_code = 'C';
	      break_scan_code = (BYTE) MapVirtualKey (vk_break_code, 0);
	    }

	  foreground_window = GetForegroundWindow ();
	  if (foreground_window && SetForegroundWindow (cp->hwnd))
	    {
	      /* Generate keystrokes as if user had typed Ctrl-Break or
                 Ctrl-C.  */
	      keybd_event (VK_CONTROL, control_scan_code, 0, 0);
	      keybd_event (vk_break_code, break_scan_code,
			   (vk_break_code == 'C' ? 0 : KEYEVENTF_EXTENDEDKEY), 0);
	      keybd_event (vk_break_code, break_scan_code,
			   (vk_break_code == 'C' ? 0 : KEYEVENTF_EXTENDEDKEY)
			   | KEYEVENTF_KEYUP, 0);
	      keybd_event (VK_CONTROL, control_scan_code, KEYEVENTF_KEYUP, 0);

	      /* Sleep for a bit to give time for Emacs frame to respond
		 to focus change events (if Emacs was active app).  */
	      Sleep (10);

	      SetForegroundWindow (foreground_window);
	    }
	}
      /* Ctrl-Break is NT equivalent of SIGINT.  */
      else if (!GenerateConsoleCtrlEvent (CTRL_BREAK_EVENT, pid))
        {
	  DebPrint (("sys_kill.GenerateConsoleCtrlEvent return %d "
		     "for pid %lu\n", GetLastError (), pid));
	  errno = EINVAL;
	  rc = -1;
	}
    }
  else
    {
      if (NILP (Vw32_start_process_share_console) && cp && cp->hwnd)
	{
#if 1
	  if (os_subtype == OS_WIN95)
	    {
/*
   Another possibility is to try terminating the VDM out-right by
   calling the Shell VxD (id 0x17) V86 interface, function #4
   "SHELL_Destroy_VM", ie.

     mov edx,4
     mov ebx,vm_handle
     call shellapi

   First need to determine the current VM handle, and then arrange for
   the shellapi call to be made from the system vm (by using
   Switch_VM_and_callback).

   Could try to invoke DestroyVM through CallVxD.

*/
#if 0
	      /* On Win95, posting WM_QUIT causes the 16-bit subsystem
		 to hang when cmdproxy is used in conjunction with
		 command.com for an interactive shell.  Posting
		 WM_CLOSE pops up a dialog that, when Yes is selected,
		 does the same thing.  TerminateProcess is also less
		 than ideal in that subprocesses tend to stick around
		 until the machine is shutdown, but at least it
		 doesn't freeze the 16-bit subsystem.  */
	      PostMessage (cp->hwnd, WM_QUIT, 0xff, 0);
#endif
	      if (!TerminateProcess (proc_hand, 0xff))
		{
		  DebPrint (("sys_kill.TerminateProcess returned %d "
			     "for pid %lu\n", GetLastError (), pid));
		  errno = EINVAL;
		  rc = -1;
		}
	    }
	  else
#endif
	    PostMessage (cp->hwnd, WM_CLOSE, 0, 0);
	}
      /* Kill the process.  On W32 this doesn't kill child processes
	 so it doesn't work very well for shells which is why it's not
	 used in every case.  */
      else if (!TerminateProcess (proc_hand, 0xff))
        {
	  DebPrint (("sys_kill.TerminateProcess returned %d "
		     "for pid %lu\n", GetLastError (), pid));
	  errno = EINVAL;
	  rc = -1;
        }
    }

  if (need_to_free)
    CloseHandle (proc_hand);

  return rc;
}

/* extern int report_file_error (char *, Lisp_Object); */

/* The following two routines are used to manipulate stdin, stdout, and
   stderr of our child processes.

   Assuming that in, out, and err are *not* inheritable, we make them
   stdin, stdout, and stderr of the child as follows:

   - Save the parent's current standard handles.
   - Set the std handles to inheritable duplicates of the ones being passed in.
     (Note that _get_osfhandle() is an io.h procedure that retrieves the
     NT file handle for a crt file descriptor.)
   - Spawn the child, which inherits in, out, and err as stdin,
     stdout, and stderr. (see Spawnve)
   - Close the std handles passed to the child.
   - Reset the parent's standard handles to the saved handles.
     (see reset_standard_handles)
   We assume that the caller closes in, out, and err after calling us.  */

void
prepare_standard_handles (int in, int out, int err, HANDLE handles[3])
{
  HANDLE parent;
  HANDLE newstdin, newstdout, newstderr;

  parent = GetCurrentProcess ();

  handles[0] = GetStdHandle (STD_INPUT_HANDLE);
  handles[1] = GetStdHandle (STD_OUTPUT_HANDLE);
  handles[2] = GetStdHandle (STD_ERROR_HANDLE);

  /* make inheritable copies of the new handles */
  if (!DuplicateHandle (parent, 
		       (HANDLE) _get_osfhandle (in),
		       parent,
		       &newstdin, 
		       0, 
		       TRUE, 
		       DUPLICATE_SAME_ACCESS))
    report_file_error ("Duplicating input handle for child", Qnil);
  
  if (!DuplicateHandle (parent,
		       (HANDLE) _get_osfhandle (out),
		       parent,
		       &newstdout,
		       0,
		       TRUE,
		       DUPLICATE_SAME_ACCESS))
    report_file_error ("Duplicating output handle for child", Qnil);
  
  if (!DuplicateHandle (parent,
		       (HANDLE) _get_osfhandle (err),
		       parent,
		       &newstderr,
		       0,
		       TRUE,
		       DUPLICATE_SAME_ACCESS))
    report_file_error ("Duplicating error handle for child", Qnil);

  /* and store them as our std handles */
  if (!SetStdHandle (STD_INPUT_HANDLE, newstdin))
    report_file_error ("Changing stdin handle", Qnil);
  
  if (!SetStdHandle (STD_OUTPUT_HANDLE, newstdout))
    report_file_error ("Changing stdout handle", Qnil);

  if (!SetStdHandle (STD_ERROR_HANDLE, newstderr))
    report_file_error ("Changing stderr handle", Qnil);
}

void
reset_standard_handles (int in, int out, int err, HANDLE handles[3])
{
  /* close the duplicated handles passed to the child */
  CloseHandle (GetStdHandle (STD_INPUT_HANDLE));
  CloseHandle (GetStdHandle (STD_OUTPUT_HANDLE));
  CloseHandle (GetStdHandle (STD_ERROR_HANDLE));

  /* now restore parent's saved std handles */
  SetStdHandle (STD_INPUT_HANDLE, handles[0]);
  SetStdHandle (STD_OUTPUT_HANDLE, handles[1]);
  SetStdHandle (STD_ERROR_HANDLE, handles[2]);
}

void
set_process_dir (char * dir)
{
  process_dir = dir;
}

#ifdef HAVE_SOCKETS

/* To avoid problems with winsock implementations that work over dial-up
   connections causing or requiring a connection to exist while Emacs is
   running, Emacs no longer automatically loads winsock on startup if it
   is present.  Instead, it will be loaded when open-network-stream is
   first called.

   To allow full control over when winsock is loaded, we provide these
   two functions to dynamically load and unload winsock.  This allows
   dial-up users to only be connected when they actually need to use
   socket services.  */

/* From nt.c */
extern HANDLE winsock_lib;
extern BOOL term_winsock (void);
extern BOOL init_winsock (int load_now);

extern Lisp_Object Vsystem_name;

DEFUN ("w32-has-winsock", Fw32_has_winsock, Sw32_has_winsock, 0, 1, 0,
  "Test for presence of the Windows socket library `winsock'.\n\
Returns non-nil if winsock support is present, nil otherwise.\n\
\n\
If the optional argument LOAD-NOW is non-nil, the winsock library is\n\
also loaded immediately if not already loaded.  If winsock is loaded,\n\
the winsock local hostname is returned (since this may be different from\n\
the value of `system-name' and should supplant it), otherwise t is\n\
returned to indicate winsock support is present.")
  (load_now)
     Lisp_Object load_now;
{
  int have_winsock;

  have_winsock = init_winsock (!NILP (load_now));
  if (have_winsock)
    {
      if (winsock_lib != NULL)
	{
	  /* Return new value for system-name.  The best way to do this
	     is to call init_system_name, saving and restoring the
	     original value to avoid side-effects.  */
	  Lisp_Object orig_hostname = Vsystem_name;
	  Lisp_Object hostname;

	  init_system_name ();
	  hostname = Vsystem_name;
	  Vsystem_name = orig_hostname;
	  return hostname;
	}
      return Qt;
    }
  return Qnil;
}

DEFUN ("w32-unload-winsock", Fw32_unload_winsock, Sw32_unload_winsock,
       0, 0, 0,
  "Unload the Windows socket library `winsock' if loaded.\n\
This is provided to allow dial-up socket connections to be disconnected\n\
when no longer needed.  Returns nil without unloading winsock if any\n\
socket connections still exist.")
  ()
{
  return term_winsock () ? Qt : Qnil;
}

#endif /* HAVE_SOCKETS */


/* Some miscellaneous functions that are Windows specific, but not GUI
   specific (ie. are applicable in terminal or batch mode as well).  */

/* lifted from fileio.c  */
#define CORRECT_DIR_SEPS(s) \
  do { if ('/' == DIRECTORY_SEP) dostounix_filename (s); \
       else unixtodos_filename (s); \
  } while (0)

DEFUN ("w32-short-file-name", Fw32_short_file_name, Sw32_short_file_name, 1, 1, 0,
  "Return the short file name version (8.3) of the full path of FILENAME.\n\
If FILENAME does not exist, return nil.\n\
All path elements in FILENAME are converted to their short names.")
     (filename)
     Lisp_Object filename;
{
  char shortname[MAX_PATH];

  CHECK_STRING (filename, 0);

  /* first expand it.  */
  filename = Fexpand_file_name (filename, Qnil);

  /* luckily, this returns the short version of each element in the path.  */
  if (GetShortPathName (XSTRING (filename)->data, shortname, MAX_PATH) == 0)
    return Qnil;

  CORRECT_DIR_SEPS (shortname);

  return build_string (shortname);
}


DEFUN ("w32-long-file-name", Fw32_long_file_name, Sw32_long_file_name,
       1, 1, 0,
  "Return the long file name version of the full path of FILENAME.\n\
If FILENAME does not exist, return nil.\n\
All path elements in FILENAME are converted to their long names.")
  (filename)
     Lisp_Object filename;
{
  char longname[ MAX_PATH ];

  CHECK_STRING (filename, 0);

  /* first expand it.  */
  filename = Fexpand_file_name (filename, Qnil);

  if (!w32_get_long_filename (XSTRING (filename)->data, longname, MAX_PATH))
    return Qnil;

  CORRECT_DIR_SEPS (longname);

  return build_string (longname);
}

DEFUN ("w32-set-process-priority", Fw32_set_process_priority, Sw32_set_process_priority,
       2, 2, 0,
  "Set the priority of PROCESS to PRIORITY.\n\
If PROCESS is nil, the priority of Emacs is changed, otherwise the\n\
priority of the process whose pid is PROCESS is changed.\n\
PRIORITY should be one of the symbols high, normal, or low;\n\
any other symbol will be interpreted as normal.\n\
\n\
If successful, the return value is t, otherwise nil.")
  (process, priority)
     Lisp_Object process, priority;
{
  HANDLE proc_handle = GetCurrentProcess ();
  DWORD  priority_class = NORMAL_PRIORITY_CLASS;
  Lisp_Object result = Qnil;

  CHECK_SYMBOL (priority, 0);

  if (!NILP (process))
    {
      DWORD pid;
      child_process *cp;

      CHECK_NUMBER (process, 0);

      /* Allow pid to be an internally generated one, or one obtained
	 externally.  This is necessary because real pids on Win95 are
	 negative.  */

      pid = XINT (process);
      cp = find_child_pid (pid);
      if (cp != NULL)
	pid = cp->procinfo.dwProcessId;

      proc_handle = OpenProcess (PROCESS_SET_INFORMATION, FALSE, pid);
    }

  if (EQ (priority, Qhigh))
    priority_class = HIGH_PRIORITY_CLASS;
  else if (EQ (priority, Qlow))
    priority_class = IDLE_PRIORITY_CLASS;

  if (proc_handle != NULL)
    {
      if (SetPriorityClass (proc_handle, priority_class))
	result = Qt;
      if (!NILP (process))
	CloseHandle (proc_handle);
    }

  return result;
}


DEFUN ("w32-get-locale-info", Fw32_get_locale_info, Sw32_get_locale_info, 1, 2, 0,
  "Return information about the Windows locale LCID.\n\
By default, return a three letter locale code which encodes the default\n\
language as the first two characters, and the country or regionial variant\n\
as the third letter.  For example, ENU refers to `English (United States)',\n\
while ENC means `English (Canadian)'.\n\
\n\
If the optional argument LONGFORM is t, the long form of the locale\n\
name is returned, e.g. `English (United States)' instead; if LONGFORM\n\
is a number, it is interpreted as an LCTYPE constant and the corresponding\n\
locale information is returned.\n\
\n\
If LCID (a 16-bit number) is not a valid locale, the result is nil.")
     (lcid, longform)
     Lisp_Object lcid, longform;
{
  int got_abbrev;
  int got_full;
  char abbrev_name[32] = { 0 };
  char full_name[256] = { 0 };

  CHECK_NUMBER (lcid, 0);

  if (!IsValidLocale (XINT (lcid), LCID_SUPPORTED))
    return Qnil;

  if (NILP (longform))
    {
      got_abbrev = GetLocaleInfo (XINT (lcid),
				  LOCALE_SABBREVLANGNAME | LOCALE_USE_CP_ACP,
				  abbrev_name, sizeof (abbrev_name));
      if (got_abbrev)
	return build_string (abbrev_name);
    }
  else if (EQ (longform, Qt))
    {
      got_full = GetLocaleInfo (XINT (lcid),
				LOCALE_SLANGUAGE | LOCALE_USE_CP_ACP,
				full_name, sizeof (full_name));
      if (got_full)
	return build_string (full_name);
    }
  else if (NUMBERP (longform))
    {
      got_full = GetLocaleInfo (XINT (lcid),
				XINT (longform),
				full_name, sizeof (full_name));
      if (got_full)
	return make_unibyte_string (full_name, got_full);
    }

  return Qnil;
}


DEFUN ("w32-get-current-locale-id", Fw32_get_current_locale_id, Sw32_get_current_locale_id, 0, 0, 0,
  "Return Windows locale id for current locale setting.\n\
This is a numerical value; use `w32-get-locale-info' to convert to a\n\
human-readable form.")
     ()
{
  return make_number (GetThreadLocale ());
}

DWORD int_from_hex (char * s)
{
  DWORD val = 0;
  static char hex[] = "0123456789abcdefABCDEF";
  char * p;

  while (*s && (p = strchr(hex, *s)) != NULL)
    {
      unsigned digit = p - hex;
      if (digit > 15)
	digit -= 6;
      val = val * 16 + digit;
      s++;
    }
  return val;
}

/* We need to build a global list, since the EnumSystemLocale callback
   function isn't given a context pointer.  */
Lisp_Object Vw32_valid_locale_ids;

BOOL CALLBACK enum_locale_fn (LPTSTR localeNum)
{
  DWORD id = int_from_hex (localeNum);
  Vw32_valid_locale_ids = Fcons (make_number (id), Vw32_valid_locale_ids);
  return TRUE;
}

DEFUN ("w32-get-valid-locale-ids", Fw32_get_valid_locale_ids, Sw32_get_valid_locale_ids, 0, 0, 0,
  "Return list of all valid Windows locale ids.\n\
Each id is a numerical value; use `w32-get-locale-info' to convert to a\n\
human-readable form.")
     ()
{
  Vw32_valid_locale_ids = Qnil;

  EnumSystemLocales (enum_locale_fn, LCID_SUPPORTED);

  Vw32_valid_locale_ids = Fnreverse (Vw32_valid_locale_ids);
  return Vw32_valid_locale_ids;
}


DEFUN ("w32-get-default-locale-id", Fw32_get_default_locale_id, Sw32_get_default_locale_id, 0, 1, 0,
  "Return Windows locale id for default locale setting.\n\
By default, the system default locale setting is returned; if the optional\n\
parameter USERP is non-nil, the user default locale setting is returned.\n\
This is a numerical value; use `w32-get-locale-info' to convert to a\n\
human-readable form.")
     (userp)
     Lisp_Object userp;
{
  if (NILP (userp))
    return make_number (GetSystemDefaultLCID ());
  return make_number (GetUserDefaultLCID ());
}

  
DEFUN ("w32-set-current-locale", Fw32_set_current_locale, Sw32_set_current_locale, 1, 1, 0,
  "Make Windows locale LCID be the current locale setting for Emacs.\n\
If successful, the new locale id is returned, otherwise nil.")
     (lcid)
     Lisp_Object lcid;
{
  CHECK_NUMBER (lcid, 0);

  if (!IsValidLocale (XINT (lcid), LCID_SUPPORTED))
    return Qnil;

  if (!SetThreadLocale (XINT (lcid)))
    return Qnil;

  /* Need to set input thread locale if present.  */
  if (dwWindowsThreadId)
    /* Reply is not needed.  */
    PostThreadMessage (dwWindowsThreadId, WM_EMACS_SETLOCALE, XINT (lcid), 0);

  return make_number (GetThreadLocale ());
}


/* We need to build a global list, since the EnumCodePages callback
   function isn't given a context pointer.  */
Lisp_Object Vw32_valid_codepages;

BOOL CALLBACK enum_codepage_fn (LPTSTR codepageNum)
{
  DWORD id = atoi (codepageNum);
  Vw32_valid_codepages = Fcons (make_number (id), Vw32_valid_codepages);
  return TRUE;
}

DEFUN ("w32-get-valid-codepages", Fw32_get_valid_codepages, Sw32_get_valid_codepages, 0, 0, 0,
  "Return list of all valid Windows codepages.")
     ()
{
  Vw32_valid_codepages = Qnil;

  EnumSystemCodePages (enum_codepage_fn, CP_SUPPORTED);

  Vw32_valid_codepages = Fnreverse (Vw32_valid_codepages);
  return Vw32_valid_codepages;
}


DEFUN ("w32-get-console-codepage", Fw32_get_console_codepage, Sw32_get_console_codepage, 0, 0, 0,
  "Return current Windows codepage for console input.")
     ()
{
  return make_number (GetConsoleCP ());
}

  
DEFUN ("w32-set-console-codepage", Fw32_set_console_codepage, Sw32_set_console_codepage, 1, 1, 0,
  "Make Windows codepage CP be the current codepage setting for Emacs.\n\
The codepage setting affects keyboard input and display in tty mode.\n\
If successful, the new CP is returned, otherwise nil.")
     (cp)
     Lisp_Object cp;
{
  CHECK_NUMBER (cp, 0);

  if (!IsValidCodePage (XINT (cp)))
    return Qnil;

  if (!SetConsoleCP (XINT (cp)))
    return Qnil;

  return make_number (GetConsoleCP ());
}


DEFUN ("w32-get-console-output-codepage", Fw32_get_console_output_codepage, Sw32_get_console_output_codepage, 0, 0, 0,
  "Return current Windows codepage for console output.")
     ()
{
  return make_number (GetConsoleOutputCP ());
}

  
DEFUN ("w32-set-console-output-codepage", Fw32_set_console_output_codepage, Sw32_set_console_output_codepage, 1, 1, 0,
  "Make Windows codepage CP be the current codepage setting for Emacs.\n\
The codepage setting affects keyboard input and display in tty mode.\n\
If successful, the new CP is returned, otherwise nil.")
     (cp)
     Lisp_Object cp;
{
  CHECK_NUMBER (cp, 0);

  if (!IsValidCodePage (XINT (cp)))
    return Qnil;

  if (!SetConsoleOutputCP (XINT (cp)))
    return Qnil;

  return make_number (GetConsoleOutputCP ());
}


DEFUN ("w32-get-codepage-charset", Fw32_get_codepage_charset, Sw32_get_codepage_charset, 1, 1, 0,
  "Return charset of codepage CP.\n\
Returns nil if the codepage is not valid.")
     (cp)
     Lisp_Object cp;
{
  CHARSETINFO info;

  CHECK_NUMBER (cp, 0);

  if (!IsValidCodePage (XINT (cp)))
    return Qnil;

  if (TranslateCharsetInfo ((DWORD *) XINT (cp), &info, TCI_SRCCODEPAGE))
    return make_number (info.ciCharset);

  return Qnil;
}


DEFUN ("w32-get-valid-keyboard-layouts", Fw32_get_valid_keyboard_layouts, Sw32_get_valid_keyboard_layouts, 0, 0, 0,
  "Return list of Windows keyboard languages and layouts.\n\
The return value is a list of pairs of language id and layout id.")
     ()
{
  int num_layouts = GetKeyboardLayoutList (0, NULL);
  HKL * layouts = (HKL *) alloca (num_layouts * sizeof (HKL));
  Lisp_Object obj = Qnil;

  if (GetKeyboardLayoutList (num_layouts, layouts) == num_layouts)
    {
      while (--num_layouts >= 0)
	{
	  DWORD kl = (DWORD) layouts[num_layouts];

	  obj = Fcons (Fcons (make_number (kl & 0xffff),
			      make_number ((kl >> 16) & 0xffff)),
		       obj);
	}
    }

  return obj;
}


DEFUN ("w32-get-keyboard-layout", Fw32_get_keyboard_layout, Sw32_get_keyboard_layout, 0, 0, 0,
  "Return current Windows keyboard language and layout.\n\
The return value is the cons of the language id and the layout id.")
     ()
{
  DWORD kl = (DWORD) GetKeyboardLayout (dwWindowsThreadId);

  return Fcons (make_number (kl & 0xffff),
		make_number ((kl >> 16) & 0xffff));
}

  
DEFUN ("w32-set-keyboard-layout", Fw32_set_keyboard_layout, Sw32_set_keyboard_layout, 1, 1, 0,
  "Make LAYOUT be the current keyboard layout for Emacs.\n\
The keyboard layout setting affects interpretation of keyboard input.\n\
If successful, the new layout id is returned, otherwise nil.")
     (layout)
     Lisp_Object layout;
{
  DWORD kl;

  CHECK_CONS (layout, 0);
  CHECK_NUMBER (XCONS (layout)->car, 0);
  CHECK_NUMBER (XCONS (layout)->cdr, 0);

  kl = (XINT (XCONS (layout)->car) & 0xffff)
    | (XINT (XCONS (layout)->cdr) << 16);

  /* Synchronize layout with input thread.  */
  if (dwWindowsThreadId)
    {
      if (PostThreadMessage (dwWindowsThreadId, WM_EMACS_SETKEYBOARDLAYOUT,
			     (WPARAM) kl, 0))
	{
	  MSG msg;
	  GetMessage (&msg, NULL, WM_EMACS_DONE, WM_EMACS_DONE);

	  if (msg.wParam == 0)
	    return Qnil;
	}
    }
  else if (!ActivateKeyboardLayout ((HKL) kl, 0))
    return Qnil;

  return Fw32_get_keyboard_layout ();
}


syms_of_ntproc ()
{
  Qhigh = intern ("high");
  Qlow = intern ("low");

#ifdef HAVE_SOCKETS
  defsubr (&Sw32_has_winsock);
  defsubr (&Sw32_unload_winsock);
#endif
  defsubr (&Sw32_short_file_name);
  defsubr (&Sw32_long_file_name);
  defsubr (&Sw32_set_process_priority);
  defsubr (&Sw32_get_locale_info);
  defsubr (&Sw32_get_current_locale_id);
  defsubr (&Sw32_get_default_locale_id);
  defsubr (&Sw32_get_valid_locale_ids);
  defsubr (&Sw32_set_current_locale);

  defsubr (&Sw32_get_console_codepage);
  defsubr (&Sw32_set_console_codepage);
  defsubr (&Sw32_get_console_output_codepage);
  defsubr (&Sw32_set_console_output_codepage);
  defsubr (&Sw32_get_valid_codepages);
  defsubr (&Sw32_get_codepage_charset);

  defsubr (&Sw32_get_valid_keyboard_layouts);
  defsubr (&Sw32_get_keyboard_layout);
  defsubr (&Sw32_set_keyboard_layout);

  DEFVAR_LISP ("w32-quote-process-args", &Vw32_quote_process_args,
    "Non-nil enables quoting of process arguments to ensure correct parsing.\n\
Because Windows does not directly pass argv arrays to child processes,\n\
programs have to reconstruct the argv array by parsing the command\n\
line string.  For an argument to contain a space, it must be enclosed\n\
in double quotes or it will be parsed as multiple arguments.\n\
\n\
If the value is a character, that character will be used to escape any\n\
quote characters that appear, otherwise a suitable escape character\n\
will be chosen based on the type of the program.");
  Vw32_quote_process_args = Qt;

  DEFVAR_LISP ("w32-start-process-show-window",
	       &Vw32_start_process_show_window,
    "When nil, processes started via start-process hide their windows.\n\
When non-nil, they show their window in the method of their choice.");
  Vw32_start_process_show_window = Qnil;

  DEFVAR_LISP ("w32-start-process-share-console",
	       &Vw32_start_process_share_console,
    "When nil, processes started via start-process are given a new console.\n\
When non-nil, they share the Emacs console; this has the limitation of\n\
allowing only only DOS subprocess to run at a time (whether started directly\n\
or indirectly by Emacs), and preventing Emacs from cleanly terminating the\n\
subprocess group, but may allow Emacs to interrupt a subprocess that doesn't\n\
otherwise respond to interrupts from Emacs.");
  Vw32_start_process_share_console = Qnil;

  DEFVAR_INT ("w32-pipe-read-delay", &Vw32_pipe_read_delay,
    "Forced delay before reading subprocess output.\n\
This is done to improve the buffering of subprocess output, by\n\
avoiding the inefficiency of frequently reading small amounts of data.\n\
\n\
If positive, the value is the number of milliseconds to sleep before\n\
reading the subprocess output.  If negative, the magnitude is the number\n\
of time slices to wait (effectively boosting the priority of the child\n\
process temporarily).  A value of zero disables waiting entirely.");
  Vw32_pipe_read_delay = 50;

  DEFVAR_LISP ("w32-downcase-file-names", &Vw32_downcase_file_names,
    "Non-nil means convert all-upper case file names to lower case.\n\
This applies when performing completions and file name expansion.");
  Vw32_downcase_file_names = Qnil;

#if 0
  DEFVAR_LISP ("w32-generate-fake-inodes", &Vw32_generate_fake_inodes,
    "Non-nil means attempt to fake realistic inode values.\n\
This works by hashing the truename of files, and should detect \n\
aliasing between long and short (8.3 DOS) names, but can have\n\
false positives because of hash collisions.  Note that determing\n\
the truename of a file can be slow.");
  Vw32_generate_fake_inodes = Qnil;
#endif

  DEFVAR_LISP ("w32-get-true-file-attributes", &Vw32_get_true_file_attributes,
    "Non-nil means determine accurate link count in file-attributes.\n\
This option slows down file-attributes noticeably, so is disabled by\n\
default.  Note that it is only useful for files on NTFS volumes,\n\
where hard links are supported.");
  Vw32_get_true_file_attributes = Qnil;
}
/* end of ntproc.c */